On 3/10/21 5:20 PM, nicolas.ferre@microchip.com wrote:

From: Nicolas Ferre nicolas.ferre@microchip.com

Fix the whole mux-mask table according to datasheet for the sam9x60 product. Too much functions for pins were disabled leading to misunderstandings when enabling more peripherals or taking this table as an example for another board. Take advantage of this fix to move the mux-mask in the SoC file where it belongs and use lower case letters for hex numbers like everywhere in the file.

Signed-off-by: Nicolas Ferre nicolas.ferre@microchip.com Fixes: 1e5f532c2737 ("ARM: dts: at91: sam9x60: add device tree for soc and board") Cc: stable@vger.kernel.org # 5.6+ Cc: Sandeep Sheriker Mallikarjun sandeepsheriker.mallikarjun@microchip.com

I went through all the pins described in DS60001579D, and I obtained the same mux-mask values:

Reviewed-by: Tudor Ambarus tudor.ambarus@microchip.com

---

v1 -> v2:

• move to SoC dtsi file: it applies to all boards using the sam9x60 SoC version
• use lower case for hex numbers instead of mixed nonsense

arch/arm/boot/dts/at91-sam9x60ek.dts | 8 -------- arch/arm/boot/dts/sam9x60.dtsi | 9 +++++++++ 2 files changed, 9 insertions(+), 8 deletions(-)

diff --git a/arch/arm/boot/dts/at91-sam9x60ek.dts b/arch/arm/boot/dts/at91-sam9x60ek.dts index 4c40ae571154..775ceb3acb6c 100644 --- a/arch/arm/boot/dts/at91-sam9x60ek.dts +++ b/arch/arm/boot/dts/at91-sam9x60ek.dts @@ -334,14 +334,6 @@ ethernet-phy@0 { }; &pinctrl {

• atmel,mux-mask = <

• 	 /*	A	B	C	*/
  

• 	 0xFFFFFEFF 0xC0E039FF 0xEF00019D	/* pioA */
  

• 	 0x03FFFFFF 0x02FC7E68 0x00780000	/* pioB */
  

• 	 0xffffffff 0xF83FFFFF 0xB800F3FC	/* pioC */
  

• 	 0x003FFFFF 0x003F8000 0x00000000	/* pioD */
  

• 	 >;
  

• adc { pinctrl_adc_default: adc_default { atmel,pins = <AT91_PIOB 15 AT91_PERIPH_A AT91_PINCTRL_NONE>;

diff --git a/arch/arm/boot/dts/sam9x60.dtsi b/arch/arm/boot/dts/sam9x60.dtsi index 84066c1298df..ec45ced3cde6 100644 --- a/arch/arm/boot/dts/sam9x60.dtsi +++ b/arch/arm/boot/dts/sam9x60.dtsi @@ -606,6 +606,15 @@ pinctrl: pinctrl@fffff400 { compatible = "microchip,sam9x60-pinctrl", "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus"; ranges = <0xfffff400 0xfffff400 0x800>;

• 		/* mux-mask corresponding to sam9x60 SoC in TFBGA228L package */
  

• 		atmel,mux-mask = <
  

• 				 /*	A	B	C	*/
  

• 				 0xffffffff 0xffe03fff 0xef00019d	/* pioA */
  

• 				 0x03ffffff 0x02fc7e7f 0x00780000	/* pioB */
  

• 				 0xffffffff 0xffffffff 0xf83fffff	/* pioC */
  

• 				 0x003fffff 0x003f8000 0x00000000	/* pioD */
  

• 				 >;
  

• 	pioA: gpio@fffff400 {
  		compatible = "microchip,sam9x60-gpio", "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
  		reg = <0xfffff400 0x200>;