On Mon, Nov 20, 2023 at 05:43:30PM +0100, Johan Hovold wrote:

The DP/DM wakeup interrupts are edge triggered and which edge to trigger on depends on use-case and whether a Low speed or Full/High speed device is connected.

Fixes: 0c9dde0d2015 ("arm64: dts: qcom: sm8150: Add secondary USB and PHY nodes") Fixes: b33d2868e8d3 ("arm64: dts: qcom: sm8150: Add USB and PHY device nodes") Cc: stable@vger.kernel.org # 5.10 Cc: Jonathan Marek jonathan@marek.ca Cc: Jack Pham quic_jackp@quicinc.com Signed-off-by: Johan Hovold johan+linaro@kernel.org

---

Reviewed-by: Jack Pham quic_jackp@quicinc.com

arch/arm64/boot/dts/qcom/sm8150.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi index 97623af13464..3e7048d8ac55 100644 --- a/arch/arm64/boot/dts/qcom/sm8150.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi @@ -3567,8 +3567,8 @@ usb_1: usb@a6f8800 { interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>,

• 		     <GIC_SPI 488 IRQ_TYPE_LEVEL_HIGH>,
  

• 		     <GIC_SPI 489 IRQ_TYPE_LEVEL_HIGH>;
  

• 		     <GIC_SPI 488 IRQ_TYPE_EDGE_BOTH>,
  

• 		     <GIC_SPI 489 IRQ_TYPE_EDGE_BOTH>;
  interrupt-names = "hs_phy_irq", "ss_phy_irq",
  		  "dm_hs_phy_irq", "dp_hs_phy_irq";
  

@@ -3620,8 +3620,8 @@ usb_2: usb@a8f8800 { interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>,

• 		     <GIC_SPI 490 IRQ_TYPE_LEVEL_HIGH>,
  

• 		     <GIC_SPI 491 IRQ_TYPE_LEVEL_HIGH>;
  

• 		     <GIC_SPI 490 IRQ_TYPE_EDGE_BOTH>,
  

• 		     <GIC_SPI 491 IRQ_TYPE_EDGE_BOTH>;
  interrupt-names = "hs_phy_irq", "ss_phy_irq",
  		  "dm_hs_phy_irq", "dp_hs_phy_irq";