From: Oliver Neukum oneukum@suse.com

[ Upstream commit a8be80053ea74bd9c3f9a3810e93b802236d6498 ]

If you do sanity checks, you should do them for both endpoints. Hence introduce checking for endpoint type for the output endpoint, too.

Reported-by: syzbot+998261c2ae5932458f6c@syzkaller.appspotmail.com Signed-off-by: Oliver Neukum oneukum@suse.com Signed-off-by: Sean Young sean@mess.org Signed-off-by: Mauro Carvalho Chehab mchehab+huawei@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/rc/ati_remote.c | 4 ++++ 1 file changed, 4 insertions(+)

diff --git a/drivers/media/rc/ati_remote.c b/drivers/media/rc/ati_remote.c index a35631891cc00..3c3f4c4f6be40 100644 --- a/drivers/media/rc/ati_remote.c +++ b/drivers/media/rc/ati_remote.c @@ -843,6 +843,10 @@ static int ati_remote_probe(struct usb_interface *interface, err("%s: endpoint_in message size==0? \n", __func__); return -ENODEV; } + if (!usb_endpoint_is_int_out(endpoint_out)) { + err("%s: Unexpected endpoint_out\n", __func__); + return -ENODEV; + }

ati_remote = kzalloc(sizeof (struct ati_remote), GFP_KERNEL); rc_dev = rc_allocate_device();

From: Qiushi Wu wu000273@umn.edu

[ Upstream commit c47f7c779ef0458a58583f00c9ed71b7f5a4d0a2 ]

On calling pm_runtime_get_sync() the reference count of the device is incremented. In case of failure, decrement the reference count before returning the error.

Signed-off-by: Qiushi Wu wu000273@umn.edu Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Mauro Carvalho Chehab mchehab+huawei@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/platform/exynos4-is/media-dev.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/drivers/media/platform/exynos4-is/media-dev.c b/drivers/media/platform/exynos4-is/media-dev.c index 31cc7d94064e3..809a415ed10f2 100644 --- a/drivers/media/platform/exynos4-is/media-dev.c +++ b/drivers/media/platform/exynos4-is/media-dev.c @@ -413,8 +413,10 @@ static int fimc_md_register_sensor_entities(struct fimc_md *fmd) return -ENXIO;

ret = pm_runtime_get_sync(fmd->pmf); - if (ret < 0) + if (ret < 0) { + pm_runtime_put(fmd->pmf); return ret; + }

fmd->num_sensors = 0;

From: Dinghao Liu dinghao.liu@zju.edu.cn

[ Upstream commit dbd2f2dc025f9be8ae063e4f270099677238f620 ]

pm_runtime_get_sync() increments the runtime PM usage counter even when it returns an error code. Thus a pairing decrement is needed on the error handling path to keep the counter balanced.

Signed-off-by: Dinghao Liu dinghao.liu@zju.edu.cn Reviewed-by: Fabien Dessenne fabien.dessenne@st.com Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Mauro Carvalho Chehab mchehab+huawei@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/platform/sti/bdisp/bdisp-v4l2.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/media/platform/sti/bdisp/bdisp-v4l2.c b/drivers/media/platform/sti/bdisp/bdisp-v4l2.c index a00dfaa1b945d..6c97063cb3b3f 100644 --- a/drivers/media/platform/sti/bdisp/bdisp-v4l2.c +++ b/drivers/media/platform/sti/bdisp/bdisp-v4l2.c @@ -1369,7 +1369,7 @@ static int bdisp_probe(struct platform_device *pdev) ret = pm_runtime_get_sync(dev); if (ret < 0) { dev_err(dev, "failed to set PM\n"); - goto err_dbg; + goto err_pm; }

/* Continuous memory allocator */ @@ -1406,7 +1406,6 @@ static int bdisp_probe(struct platform_device *pdev) vb2_dma_contig_cleanup_ctx(bdisp->alloc_ctx); err_pm: pm_runtime_put(dev); -err_dbg: bdisp_debugfs_remove(bdisp); err_v4l2: v4l2_device_unregister(&bdisp->v4l2_dev);

From: Adam Goode agoode@google.com

[ Upstream commit 8a652a17e3c005dcdae31b6c8fdf14382a29cbbe ]

bFrameIndex and bFormatIndex can be negotiated by the camera during probing, resulting in the camera choosing a different format than expected. v4l2 can already accommodate such changes, but the code was not updating the proper fields.

Without such a change, v4l2 would potentially interpret the payload incorrectly, causing corrupted output. This was happening on the Elgato HD60 S+, which currently always renegotiates to format 1.

As an aside, the Elgato firmware is buggy and should not be renegotating, but it is still a valid thing for the camera to do. Both macOS and Windows will properly probe and read uncorrupted images from this camera.

With this change, both qv4l2 and chromium can now read uncorrupted video from the Elgato HD60 S+.

[Add blank lines, remove periods at the of messages]

Signed-off-by: Adam Goode agoode@google.com Signed-off-by: Laurent Pinchart laurent.pinchart@ideasonboard.com Signed-off-by: Mauro Carvalho Chehab mchehab+huawei@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/usb/uvc/uvc_v4l2.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+)

diff --git a/drivers/media/usb/uvc/uvc_v4l2.c b/drivers/media/usb/uvc/uvc_v4l2.c index 0e7d16fe84d42..a0a544628053d 100644 --- a/drivers/media/usb/uvc/uvc_v4l2.c +++ b/drivers/media/usb/uvc/uvc_v4l2.c @@ -242,11 +242,41 @@ static int uvc_v4l2_try_format(struct uvc_streaming *stream, if (ret < 0) goto done;

+ /* After the probe, update fmt with the values returned from + * negotiation with the device. + */ + for (i = 0; i < stream->nformats; ++i) { + if (probe->bFormatIndex == stream->format[i].index) { + format = &stream->format[i]; + break; + } + } + + if (i == stream->nformats) { + uvc_trace(UVC_TRACE_FORMAT, "Unknown bFormatIndex %u\n", + probe->bFormatIndex); + return -EINVAL; + } + + for (i = 0; i < format->nframes; ++i) { + if (probe->bFrameIndex == format->frame[i].bFrameIndex) { + frame = &format->frame[i]; + break; + } + } + + if (i == format->nframes) { + uvc_trace(UVC_TRACE_FORMAT, "Unknown bFrameIndex %u\n", + probe->bFrameIndex); + return -EINVAL; + } + fmt->fmt.pix.width = frame->wWidth; fmt->fmt.pix.height = frame->wHeight; fmt->fmt.pix.field = V4L2_FIELD_NONE; fmt->fmt.pix.bytesperline = format->bpp * frame->wWidth / 8; fmt->fmt.pix.sizeimage = probe->dwMaxVideoFrameSize; + fmt->fmt.pix.pixelformat = format->fcc; fmt->fmt.pix.colorspace = format->colorspace; fmt->fmt.pix.priv = 0;

From: Mauro Carvalho Chehab mchehab+huawei@kernel.org

[ Upstream commit 15a36aae1ec1c1f17149b6113b92631791830740 ]

As reported by smatch: drivers/media/pci/saa7134//saa7134-tvaudio.c:686 saa_dsp_writel() warn: should 'reg << 2' be a 64 bit type?

On a 64-bits Kernel, the shift might be bigger than 32 bits.

In real, this should never happen, but let's shut up the warning.

Signed-off-by: Mauro Carvalho Chehab mchehab+huawei@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/pci/saa7134/saa7134-tvaudio.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/media/pci/saa7134/saa7134-tvaudio.c b/drivers/media/pci/saa7134/saa7134-tvaudio.c index 21a579309575d..02407983ce236 100644 --- a/drivers/media/pci/saa7134/saa7134-tvaudio.c +++ b/drivers/media/pci/saa7134/saa7134-tvaudio.c @@ -696,7 +696,8 @@ int saa_dsp_writel(struct saa7134_dev *dev, int reg, u32 value) { int err;

- audio_dbg(2, "dsp write reg 0x%x = 0x%06x\n", reg << 2, value); + audio_dbg(2, "dsp write reg 0x%x = 0x%06x\n", + (reg << 2) & 0xffffffff, value); err = saa_dsp_wait_bit(dev,SAA7135_DSP_RWSTATE_WRR); if (err < 0) return err;

From: Christoph Hellwig hch@lst.de

[ Upstream commit 428805c0c5e76ef643b1fbc893edfb636b3d8aef ]

get_gendisk grabs a reference on the disk and file operation, so this code will leak both of them while having absolutely no use for the gendisk itself.

This effectively reverts commit 2df83fa4bce421f ("PM / Hibernate: Use get_gendisk to verify partition if resume_file is integer format")

Signed-off-by: Christoph Hellwig hch@lst.de Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/power/hibernate.c | 11 ----------- 1 file changed, 11 deletions(-)

diff --git a/kernel/power/hibernate.c b/kernel/power/hibernate.c index 3124cebaec31e..7d73b30c55ccd 100644 --- a/kernel/power/hibernate.c +++ b/kernel/power/hibernate.c @@ -779,17 +779,6 @@ static int software_resume(void)

/* Check if the device is there */ swsusp_resume_device = name_to_dev_t(resume_file); - - /* - * name_to_dev_t is ineffective to verify parition if resume_file is in - * integer format. (e.g. major:minor) - */ - if (isdigit(resume_file[0]) && resume_wait) { - int partno; - while (!get_gendisk(swsusp_resume_device, &partno)) - msleep(10); - } - if (!swsusp_resume_device) { /* * Some device discovery might still be in progress; we need

From: Roman Bolshakov r.bolshakov@yadro.com

[ Upstream commit 7010645ba7256992818b518163f46bd4cdf8002a ]

trace-cmd report doesn't show events from target subsystem because scsi_command_size() leaks through event format string:

[target:target_sequencer_start] function scsi_command_size not defined [target:target_cmd_complete] function scsi_command_size not defined

Addition of scsi_command_size() to plugin_scsi.c in trace-cmd doesn't help because an expression is used inside TP_printk(). trace-cmd event parser doesn't understand minus sign inside [ ]:

Error: expected ']' but read '-'

Rather than duplicating kernel code in plugin_scsi.c, provide a dedicated field for CONTROL byte.

Link: https://lore.kernel.org/r/20200929125957.83069-1-r.bolshakov@yadro.com Reviewed-by: Mike Christie michael.christie@oracle.com Signed-off-by: Roman Bolshakov r.bolshakov@yadro.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- include/scsi/scsi_common.h | 7 +++++++ include/trace/events/target.h | 12 ++++++------ 2 files changed, 13 insertions(+), 6 deletions(-)

diff --git a/include/scsi/scsi_common.h b/include/scsi/scsi_common.h index 11571b2a831e3..92ba09200f89b 100644 --- a/include/scsi/scsi_common.h +++ b/include/scsi/scsi_common.h @@ -24,6 +24,13 @@ scsi_command_size(const unsigned char *cmnd) scsi_varlen_cdb_length(cmnd) : COMMAND_SIZE(cmnd[0]); }

+static inline unsigned char +scsi_command_control(const unsigned char *cmnd) +{ + return (cmnd[0] == VARIABLE_LENGTH_CMD) ? + cmnd[1] : cmnd[COMMAND_SIZE(cmnd[0]) - 1]; +} + /* Returns a human-readable name for the device */ extern const char *scsi_device_type(unsigned type);

diff --git a/include/trace/events/target.h b/include/trace/events/target.h index 50fea660c0f89..d543e8b87e50a 100644 --- a/include/trace/events/target.h +++ b/include/trace/events/target.h @@ -139,6 +139,7 @@ TRACE_EVENT(target_sequencer_start, __field( unsigned int, opcode ) __field( unsigned int, data_length ) __field( unsigned int, task_attribute ) + __field( unsigned char, control ) __array( unsigned char, cdb, TCM_MAX_COMMAND_SIZE ) __string( initiator, cmd->se_sess->se_node_acl->initiatorname ) ), @@ -148,6 +149,7 @@ TRACE_EVENT(target_sequencer_start, __entry->opcode = cmd->t_task_cdb[0]; __entry->data_length = cmd->data_length; __entry->task_attribute = cmd->sam_task_attr; + __entry->control = scsi_command_control(cmd->t_task_cdb); memcpy(__entry->cdb, cmd->t_task_cdb, TCM_MAX_COMMAND_SIZE); __assign_str(initiator, cmd->se_sess->se_node_acl->initiatorname); ), @@ -157,9 +159,7 @@ TRACE_EVENT(target_sequencer_start, show_opcode_name(__entry->opcode), __entry->data_length, __print_hex(__entry->cdb, 16), show_task_attribute_name(__entry->task_attribute), - scsi_command_size(__entry->cdb) <= 16 ? - __entry->cdb[scsi_command_size(__entry->cdb) - 1] : - __entry->cdb[1] + __entry->control ) );

@@ -174,6 +174,7 @@ TRACE_EVENT(target_cmd_complete, __field( unsigned int, opcode ) __field( unsigned int, data_length ) __field( unsigned int, task_attribute ) + __field( unsigned char, control ) __field( unsigned char, scsi_status ) __field( unsigned char, sense_length ) __array( unsigned char, cdb, TCM_MAX_COMMAND_SIZE ) @@ -186,6 +187,7 @@ TRACE_EVENT(target_cmd_complete, __entry->opcode = cmd->t_task_cdb[0]; __entry->data_length = cmd->data_length; __entry->task_attribute = cmd->sam_task_attr; + __entry->control = scsi_command_control(cmd->t_task_cdb); __entry->scsi_status = cmd->scsi_status; __entry->sense_length = cmd->scsi_status == SAM_STAT_CHECK_CONDITION ? min(18, ((u8 *) cmd->sense_buffer)[SPC_ADD_SENSE_LEN_OFFSET] + 8) : 0; @@ -202,9 +204,7 @@ TRACE_EVENT(target_cmd_complete, show_opcode_name(__entry->opcode), __entry->data_length, __print_hex(__entry->cdb, 16), show_task_attribute_name(__entry->task_attribute), - scsi_command_size(__entry->cdb) <= 16 ? - __entry->cdb[scsi_command_size(__entry->cdb) - 1] : - __entry->cdb[1] + __entry->control ) );

From: Jan Kara jack@suse.cz

[ Upstream commit 44ac6b829c4e173fdf6df18e6dd86aecf9a3dc99 ]

Although UDF standard allows it, we don't support sparing table larger than a single block. Check it during mount so that we don't try to access memory beyond end of buffer.

Reported-by: syzbot+9991561e714f597095da@syzkaller.appspotmail.com Signed-off-by: Jan Kara jack@suse.cz Signed-off-by: Sasha Levin sashal@kernel.org --- fs/udf/super.c | 6 ++++++ 1 file changed, 6 insertions(+)

diff --git a/fs/udf/super.c b/fs/udf/super.c index 159977ec8e548..710f1b8fad9bf 100644 --- a/fs/udf/super.c +++ b/fs/udf/super.c @@ -1390,6 +1390,12 @@ static int udf_load_sparable_map(struct super_block *sb, (int)spm->numSparingTables); return -EIO; } + if (le32_to_cpu(spm->sizeSparingTable) > sb->s_blocksize) { + udf_err(sb, "error loading logical volume descriptor: " + "Too big sparing table size (%u)\n", + le32_to_cpu(spm->sizeSparingTable)); + return -EIO; + }

for (i = 0; i < spm->numSparingTables; i++) { loc = le32_to_cpu(spm->locSparingTable[i]);

From: Brooke Basile brookebasile@gmail.com

[ Upstream commit 03fb92a432ea5abe5909bca1455b7e44a9380480 ]

Calls to usb_kill_anchored_urbs() after usb_kill_urb() on multiprocessor systems create a race condition in which usb_kill_anchored_urbs() deallocates the URB before the completer callback is called in usb_kill_urb(), resulting in a use-after-free. To fix this, add proper lock protection to usb_kill_urb() calls that can possibly run concurrently with usb_kill_anchored_urbs().

Reported-by: syzbot+89bd486af9427a9fc605@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=cabffad18eb74197f84871802fd2c5117b61feb... Signed-off-by: Brooke Basile brookebasile@gmail.com Signed-off-by: Kalle Valo kvalo@codeaurora.org Link: https://lore.kernel.org/r/20200911071427.32354-1-brookebasile@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/ath/ath9k/hif_usb.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)

diff --git a/drivers/net/wireless/ath/ath9k/hif_usb.c b/drivers/net/wireless/ath/ath9k/hif_usb.c index 76d91859cfde9..75072a8f8cf42 100644 --- a/drivers/net/wireless/ath/ath9k/hif_usb.c +++ b/drivers/net/wireless/ath/ath9k/hif_usb.c @@ -445,10 +445,19 @@ static void hif_usb_stop(void *hif_handle) spin_unlock_irqrestore(&hif_dev->tx.tx_lock, flags);

/* The pending URBs have to be canceled. */ + spin_lock_irqsave(&hif_dev->tx.tx_lock, flags); list_for_each_entry_safe(tx_buf, tx_buf_tmp, &hif_dev->tx.tx_pending, list) { + usb_get_urb(tx_buf->urb); + spin_unlock_irqrestore(&hif_dev->tx.tx_lock, flags); usb_kill_urb(tx_buf->urb); + list_del(&tx_buf->list); + usb_free_urb(tx_buf->urb); + kfree(tx_buf->buf); + kfree(tx_buf); + spin_lock_irqsave(&hif_dev->tx.tx_lock, flags); } + spin_unlock_irqrestore(&hif_dev->tx.tx_lock, flags);

usb_kill_anchored_urbs(&hif_dev->mgmt_submitted); } @@ -758,27 +767,37 @@ static void ath9k_hif_usb_dealloc_tx_urbs(struct hif_device_usb *hif_dev) struct tx_buf *tx_buf = NULL, *tx_buf_tmp = NULL; unsigned long flags;

+ spin_lock_irqsave(&hif_dev->tx.tx_lock, flags); list_for_each_entry_safe(tx_buf, tx_buf_tmp, &hif_dev->tx.tx_buf, list) { + usb_get_urb(tx_buf->urb); + spin_unlock_irqrestore(&hif_dev->tx.tx_lock, flags); usb_kill_urb(tx_buf->urb); list_del(&tx_buf->list); usb_free_urb(tx_buf->urb); kfree(tx_buf->buf); kfree(tx_buf); + spin_lock_irqsave(&hif_dev->tx.tx_lock, flags); } + spin_unlock_irqrestore(&hif_dev->tx.tx_lock, flags);

spin_lock_irqsave(&hif_dev->tx.tx_lock, flags); hif_dev->tx.flags |= HIF_USB_TX_FLUSH; spin_unlock_irqrestore(&hif_dev->tx.tx_lock, flags);

+ spin_lock_irqsave(&hif_dev->tx.tx_lock, flags); list_for_each_entry_safe(tx_buf, tx_buf_tmp, &hif_dev->tx.tx_pending, list) { + usb_get_urb(tx_buf->urb); + spin_unlock_irqrestore(&hif_dev->tx.tx_lock, flags); usb_kill_urb(tx_buf->urb); list_del(&tx_buf->list); usb_free_urb(tx_buf->urb); kfree(tx_buf->buf); kfree(tx_buf); + spin_lock_irqsave(&hif_dev->tx.tx_lock, flags); } + spin_unlock_irqrestore(&hif_dev->tx.tx_lock, flags);

usb_kill_anchored_urbs(&hif_dev->mgmt_submitted); }

From: Eric Biggers ebiggers@google.com

[ Upstream commit 8859bf2b1278d064a139e3031451524a49a56bd0 ]

unlock_new_inode() is only meant to be called after a new inode has already been inserted into the hash table. But reiserfs_new_inode() can call it even before it has inserted the inode, triggering the WARNING in unlock_new_inode(). Fix this by only calling unlock_new_inode() if the inode has the I_NEW flag set, indicating that it's in the table.

This addresses the syzbot report "WARNING in unlock_new_inode" (https://syzkaller.appspot.com/bug?extid=187510916eb6a14598f7).

Link: https://lore.kernel.org/r/20200628070057.820213-1-ebiggers@kernel.org Reported-by: syzbot+187510916eb6a14598f7@syzkaller.appspotmail.com Signed-off-by: Eric Biggers ebiggers@google.com Signed-off-by: Jan Kara jack@suse.cz Signed-off-by: Sasha Levin sashal@kernel.org --- fs/reiserfs/inode.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/reiserfs/inode.c b/fs/reiserfs/inode.c index 60ba35087d126..6bff69ad2c9a8 100644 --- a/fs/reiserfs/inode.c +++ b/fs/reiserfs/inode.c @@ -2161,7 +2161,8 @@ int reiserfs_new_inode(struct reiserfs_transaction_handle *th, out_inserted_sd: clear_nlink(inode); th->t_trans_id = 0; /* so the caller can't use this handle later */ - unlock_new_inode(inode); /* OK to do even if we hadn't locked it */ + if (inode->i_state & I_NEW) + unlock_new_inode(inode); iput(inode); return err; }

From: Hamish Martin hamish.martin@alliedtelesis.co.nz

[ Upstream commit b77d2a0a223bc139ee8904991b2922d215d02636 ]

Some integrated OHCI controller hubs do not expose all ports of the hub to pins on the SoC. In some cases the unconnected ports generate spurious over-current events. For example the Broadcom 56060/Ranger 2 SoC contains a nominally 3 port hub but only the first port is wired.

Default behaviour for ohci-platform driver is to use global over-current protection mode (AKA "ganged"). This leads to the spurious over-current events affecting all ports in the hub.

We now alter the default to use per-port over-current protection.

This patch results in the following configuration changes depending on quirks: - For quirk OHCI_QUIRK_SUPERIO no changes. These systems remain set up for ganged power switching and no over-current protection. - For quirk OHCI_QUIRK_AMD756 or OHCI_QUIRK_HUB_POWER power switching remains at none, while over-current protection is now guaranteed to be set to per-port rather than the previous behaviour where it was either none or global over-current protection depending on the value at function entry.

Suggested-by: Alan Stern stern@rowland.harvard.edu Acked-by: Alan Stern stern@rowland.harvard.edu Signed-off-by: Hamish Martin hamish.martin@alliedtelesis.co.nz Link: https://lore.kernel.org/r/20200910212512.16670-1-hamish.martin@alliedtelesis... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/host/ohci-hcd.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-)

diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 27bd3e49fe8e3..07d76d9d4ce1b 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -663,20 +663,24 @@ static int ohci_run (struct ohci_hcd *ohci)

/* handle root hub init quirks ... */ val = roothub_a (ohci); - val &= ~(RH_A_PSM | RH_A_OCPM); + /* Configure for per-port over-current protection by default */ + val &= ~RH_A_NOCP; + val |= RH_A_OCPM; if (ohci->flags & OHCI_QUIRK_SUPERIO) { - /* NSC 87560 and maybe others */ + /* NSC 87560 and maybe others. + * Ganged power switching, no over-current protection. + */ val |= RH_A_NOCP; - val &= ~(RH_A_POTPGT | RH_A_NPS); - ohci_writel (ohci, val, &ohci->regs->roothub.a); + val &= ~(RH_A_POTPGT | RH_A_NPS | RH_A_PSM | RH_A_OCPM); } else if ((ohci->flags & OHCI_QUIRK_AMD756) || (ohci->flags & OHCI_QUIRK_HUB_POWER)) { /* hub power always on; required for AMD-756 and some - * Mac platforms. ganged overcurrent reporting, if any. + * Mac platforms. */ val |= RH_A_NPS; - ohci_writel (ohci, val, &ohci->regs->roothub.a); } + ohci_writel(ohci, val, &ohci->regs->roothub.a); + ohci_writel (ohci, RH_HS_LPSC, &ohci->regs->roothub.status); ohci_writel (ohci, (val & RH_A_NPS) ? 0 : RH_B_PPCM, &ohci->regs->roothub.b);

From: Jing Xiangfeng jingxiangfeng@huawei.com

[ Upstream commit 5e48a084f4e824e1b624d3fd7ddcf53d2ba69e53 ]

Fix to return error code PTR_ERR() from the error handling case instead of 0.

Link: https://lore.kernel.org/r/20200907083949.154251-1-jingxiangfeng@huawei.com Acked-by: Tyrel Datwyler tyreld@linux.ibm.com Signed-off-by: Jing Xiangfeng jingxiangfeng@huawei.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/ibmvscsi/ibmvfc.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c index 0526a47e30a3f..db80ab8335dfb 100644 --- a/drivers/scsi/ibmvscsi/ibmvfc.c +++ b/drivers/scsi/ibmvscsi/ibmvfc.c @@ -4790,6 +4790,7 @@ static int ibmvfc_probe(struct vio_dev *vdev, const struct vio_device_id *id) if (IS_ERR(vhost->work_thread)) { dev_err(dev, "Couldn't create kernel thread: %ld\n", PTR_ERR(vhost->work_thread)); + rc = PTR_ERR(vhost->work_thread); goto free_host_mem; }

From: Chris Chiu chiu@endlessm.com

[ Upstream commit 86279456a4d47782398d3cb8193f78f672e36cac ]

Free the skb if usb_submit_urb fails on rx_urb. And free the urb no matter usb_submit_urb succeeds or not in rtl8xxxu_submit_int_urb.

Signed-off-by: Chris Chiu chiu@endlessm.com Signed-off-by: Kalle Valo kvalo@codeaurora.org Link: https://lore.kernel.org/r/20200906040424.22022-1-chiu@endlessm.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c index 8254d4b22c50b..b8d387edde65c 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c @@ -5135,7 +5135,6 @@ static int rtl8xxxu_submit_int_urb(struct ieee80211_hw *hw) ret = usb_submit_urb(urb, GFP_KERNEL); if (ret) { usb_unanchor_urb(urb); - usb_free_urb(urb); goto error; }

@@ -5144,6 +5143,7 @@ static int rtl8xxxu_submit_int_urb(struct ieee80211_hw *hw) rtl8xxxu_write32(priv, REG_USB_HIMR, val32);

error: + usb_free_urb(urb); return ret; }

@@ -5424,6 +5424,7 @@ static int rtl8xxxu_start(struct ieee80211_hw *hw) struct rtl8xxxu_priv *priv = hw->priv; struct rtl8xxxu_rx_urb *rx_urb; struct rtl8xxxu_tx_urb *tx_urb; + struct sk_buff *skb; unsigned long flags; int ret, i;

@@ -5472,6 +5473,13 @@ static int rtl8xxxu_start(struct ieee80211_hw *hw) rx_urb->hw = hw;

ret = rtl8xxxu_submit_rx_urb(priv, rx_urb); + if (ret) { + if (ret != -ENOMEM) { + skb = (struct sk_buff *)rx_urb->urb.context; + dev_kfree_skb(skb); + } + rtl8xxxu_queue_rx_urb(priv, rx_urb); + } } exit: /*

From: Tong Zhang ztong0001@gmail.com

[ Upstream commit db332356222d9429731ab9395c89cca403828460 ]

ipwireless_send_packet() can only return 0 on success and -ENOMEM on error, the caller should check non zero for error condition

Signed-off-by: Tong Zhang ztong0001@gmail.com Acked-by: David Sterba dsterba@suse.com Link: https://lore.kernel.org/r/20200821161942.36589-1-ztong0001@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/tty/ipwireless/network.c | 4 ++-- drivers/tty/ipwireless/tty.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/ipwireless/network.c b/drivers/tty/ipwireless/network.c index c0dfb642383b2..dc7f4eb18e0a7 100644 --- a/drivers/tty/ipwireless/network.c +++ b/drivers/tty/ipwireless/network.c @@ -116,7 +116,7 @@ static int ipwireless_ppp_start_xmit(struct ppp_channel *ppp_channel, skb->len, notify_packet_sent, network); - if (ret == -1) { + if (ret < 0) { skb_pull(skb, 2); return 0; } @@ -133,7 +133,7 @@ static int ipwireless_ppp_start_xmit(struct ppp_channel *ppp_channel, notify_packet_sent, network); kfree(buf); - if (ret == -1) + if (ret < 0) return 0; } kfree_skb(skb); diff --git a/drivers/tty/ipwireless/tty.c b/drivers/tty/ipwireless/tty.c index 345cebb07ae79..0b06b1847450f 100644 --- a/drivers/tty/ipwireless/tty.c +++ b/drivers/tty/ipwireless/tty.c @@ -217,7 +217,7 @@ static int ipw_write(struct tty_struct *linux_tty, ret = ipwireless_send_packet(tty->hardware, IPW_CHANNEL_RAS, buf, count, ipw_write_packet_sent_callback, tty); - if (ret == -1) { + if (ret < 0) { mutex_unlock(&tty->ipw_tty_mutex); return 0; }

From: Jan Kara jack@suse.cz

[ Upstream commit e9d4709fcc26353df12070566970f080e651f0c9 ]

When a usrjquota or grpjquota mount option is used multiple times, we will leak memory allocated for the file name. Make sure the last setting is used and all the previous ones are properly freed.

Reported-by: syzbot+c9e294bbe0333a6b7640@syzkaller.appspotmail.com Signed-off-by: Jan Kara jack@suse.cz Signed-off-by: Sasha Levin sashal@kernel.org --- fs/reiserfs/super.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c index f9796fd515315..503d8c06e0d93 100644 --- a/fs/reiserfs/super.c +++ b/fs/reiserfs/super.c @@ -1232,6 +1232,10 @@ static int reiserfs_parse_options(struct super_block *s, "turned on."); return 0; } + if (qf_names[qtype] != + REISERFS_SB(s)->s_qf_names[qtype]) + kfree(qf_names[qtype]); + qf_names[qtype] = NULL; if (*arg) { /* Some filename specified? */ if (REISERFS_SB(s)->s_qf_names[qtype] && strcmp(REISERFS_SB(s)->s_qf_names[qtype], @@ -1261,10 +1265,6 @@ static int reiserfs_parse_options(struct super_block *s, else *mount_options |= 1 << REISERFS_GRPQUOTA; } else { - if (qf_names[qtype] != - REISERFS_SB(s)->s_qf_names[qtype]) - kfree(qf_names[qtype]); - qf_names[qtype] = NULL; if (qtype == USRQUOTA) *mount_options &= ~(1 << REISERFS_USRQUOTA); else

From: Eli Billauer eli.billauer@gmail.com

[ Upstream commit fbc299437c06648afcc7891e6e2e6638dd48d4df ]

usb_kill_anchored_urbs() is commonly used to cancel all URBs on an anchor just before releasing resources which the URBs rely on. By doing so, users of this function rely on that no completer callbacks will take place from any URB on the anchor after it returns.

However if this function is called in parallel with __usb_hcd_giveback_urb processing a URB on the anchor, the latter may call the completer callback after usb_kill_anchored_urbs() returns. This can lead to a kernel panic due to use after release of memory in interrupt context.

The race condition is that __usb_hcd_giveback_urb() first unanchors the URB and then makes the completer callback. Such URB is hence invisible to usb_kill_anchored_urbs(), allowing it to return before the completer has been called, since the anchor's urb_list is empty.

Even worse, if the racing completer callback resubmits the URB, it may remain in the system long after usb_kill_anchored_urbs() returns.

Hence list_empty(&anchor->urb_list), which is used in the existing while-loop, doesn't reliably ensure that all URBs of the anchor are gone.

A similar problem exists with usb_poison_anchored_urbs() and usb_scuttle_anchored_urbs().

This patch adds an external do-while loop, which ensures that all URBs are indeed handled before these three functions return. This change has no effect at all unless the race condition occurs, in which case the loop will busy-wait until the racing completer callback has finished. This is a rare condition, so the CPU waste of this spinning is negligible.

The additional do-while loop relies on usb_anchor_check_wakeup(), which returns true iff the anchor list is empty, and there is no __usb_hcd_giveback_urb() in the system that is in the middle of the unanchor-before-complete phase. The @suspend_wakeups member of struct usb_anchor is used for this purpose, which was introduced to solve another problem which the same race condition causes, in commit 6ec4147e7bdb ("usb-anchor: Delay usb_wait_anchor_empty_timeout wake up till completion is done").

The surely_empty variable is necessary, because usb_anchor_check_wakeup() must be called with the lock held to prevent races. However the spinlock must be released and reacquired if the outer loop spins with an empty URB list while waiting for the unanchor-before-complete passage to finish: The completer callback may very well attempt to take the very same lock.

To summarize, using usb_anchor_check_wakeup() means that the patched functions can return only when the anchor's list is empty, and there is no invisible URB being processed. Since the inner while loop finishes on the empty list condition, the new do-while loop will terminate as well, except for when the said race condition occurs.

Signed-off-by: Eli Billauer eli.billauer@gmail.com Acked-by: Oliver Neukum oneukum@suse.com Acked-by: Alan Stern stern@rowland.harvard.edu Link: https://lore.kernel.org/r/20200731054650.30644-1-eli.billauer@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/core/urb.c | 89 +++++++++++++++++++++++++----------------- 1 file changed, 54 insertions(+), 35 deletions(-)

diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c index c095cde55329c..8c4bfd42f785d 100644 --- a/drivers/usb/core/urb.c +++ b/drivers/usb/core/urb.c @@ -767,11 +767,12 @@ void usb_block_urb(struct urb *urb) EXPORT_SYMBOL_GPL(usb_block_urb);

/** - * usb_kill_anchored_urbs - cancel transfer requests en masse + * usb_kill_anchored_urbs - kill all URBs associated with an anchor * @anchor: anchor the requests are bound to * - * this allows all outstanding URBs to be killed starting - * from the back of the queue + * This kills all outstanding URBs starting from the back of the queue, + * with guarantee that no completer callbacks will take place from the + * anchor after this function returns. * * This routine should not be called by a driver after its disconnect * method has returned. @@ -779,20 +780,26 @@ EXPORT_SYMBOL_GPL(usb_block_urb); void usb_kill_anchored_urbs(struct usb_anchor *anchor) { struct urb *victim; + int surely_empty;

- spin_lock_irq(&anchor->lock); - while (!list_empty(&anchor->urb_list)) { - victim = list_entry(anchor->urb_list.prev, struct urb, - anchor_list); - /* we must make sure the URB isn't freed before we kill it*/ - usb_get_urb(victim); - spin_unlock_irq(&anchor->lock); - /* this will unanchor the URB */ - usb_kill_urb(victim); - usb_put_urb(victim); + do { spin_lock_irq(&anchor->lock); - } - spin_unlock_irq(&anchor->lock); + while (!list_empty(&anchor->urb_list)) { + victim = list_entry(anchor->urb_list.prev, + struct urb, anchor_list); + /* make sure the URB isn't freed before we kill it */ + usb_get_urb(victim); + spin_unlock_irq(&anchor->lock); + /* this will unanchor the URB */ + usb_kill_urb(victim); + usb_put_urb(victim); + spin_lock_irq(&anchor->lock); + } + surely_empty = usb_anchor_check_wakeup(anchor); + + spin_unlock_irq(&anchor->lock); + cpu_relax(); + } while (!surely_empty); } EXPORT_SYMBOL_GPL(usb_kill_anchored_urbs);

@@ -811,21 +818,27 @@ EXPORT_SYMBOL_GPL(usb_kill_anchored_urbs); void usb_poison_anchored_urbs(struct usb_anchor *anchor) { struct urb *victim; + int surely_empty;

- spin_lock_irq(&anchor->lock); - anchor->poisoned = 1; - while (!list_empty(&anchor->urb_list)) { - victim = list_entry(anchor->urb_list.prev, struct urb, - anchor_list); - /* we must make sure the URB isn't freed before we kill it*/ - usb_get_urb(victim); - spin_unlock_irq(&anchor->lock); - /* this will unanchor the URB */ - usb_poison_urb(victim); - usb_put_urb(victim); + do { spin_lock_irq(&anchor->lock); - } - spin_unlock_irq(&anchor->lock); + anchor->poisoned = 1; + while (!list_empty(&anchor->urb_list)) { + victim = list_entry(anchor->urb_list.prev, + struct urb, anchor_list); + /* make sure the URB isn't freed before we kill it */ + usb_get_urb(victim); + spin_unlock_irq(&anchor->lock); + /* this will unanchor the URB */ + usb_poison_urb(victim); + usb_put_urb(victim); + spin_lock_irq(&anchor->lock); + } + surely_empty = usb_anchor_check_wakeup(anchor); + + spin_unlock_irq(&anchor->lock); + cpu_relax(); + } while (!surely_empty); } EXPORT_SYMBOL_GPL(usb_poison_anchored_urbs);

@@ -965,14 +978,20 @@ void usb_scuttle_anchored_urbs(struct usb_anchor *anchor) { struct urb *victim; unsigned long flags; + int surely_empty; + + do { + spin_lock_irqsave(&anchor->lock, flags); + while (!list_empty(&anchor->urb_list)) { + victim = list_entry(anchor->urb_list.prev, + struct urb, anchor_list); + __usb_unanchor_urb(victim, anchor); + } + surely_empty = usb_anchor_check_wakeup(anchor);

- spin_lock_irqsave(&anchor->lock, flags); - while (!list_empty(&anchor->urb_list)) { - victim = list_entry(anchor->urb_list.prev, struct urb, - anchor_list); - __usb_unanchor_urb(victim, anchor); - } - spin_unlock_irqrestore(&anchor->lock, flags); + spin_unlock_irqrestore(&anchor->lock, flags); + cpu_relax(); + } while (!surely_empty); }

EXPORT_SYMBOL_GPL(usb_scuttle_anchored_urbs);