This is a note to let you know that I've just added the patch titled

scsi: qla2xxx: Fix memory leak in dual/target mode

to the 4.15-stable tree which can be found at: http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git%3Ba=su...

The filename of the patch is: scsi-qla2xxx-fix-memory-leak-in-dual-target-mode.patch and it can be found in the queue-4.15 subdirectory.

If you, or anyone else, feels it should not be added to the stable tree, please let stable@vger.kernel.org know about it.

From 7867b98dceb7741065c9c1b645136facad5c2e93 Mon Sep 17 00:00:00 2001

From: "himanshu.madhani@cavium.com" himanshu.madhani@cavium.com Date: Mon, 4 Dec 2017 14:45:16 -0800 Subject: scsi: qla2xxx: Fix memory leak in dual/target mode

From: himanshu.madhani@cavium.com himanshu.madhani@cavium.com

commit 7867b98dceb7741065c9c1b645136facad5c2e93 upstream.

When driver is loaded in Target/Dual mode, it creates QPair to support MQ and allocates resources for each QPair. This Qpair initialization is delayed until the FW personality is changed to Dual/Target mode by issuing chip reset. At the time of chip reset firmware is re-initilized in correct personality all the QPairs are initialized by sending MBC_INITIALIZE_MULTIQ (001Fh).

This patch fixes memory leak by adding check to issue MBC_INITIALIZE_MULTIQ command only while deleting rsp/req queue when the flag is set for initiator mode, and clean up QPair resources correctly during the driver unload. This MBX does not need to be issued for Target/Dual mode because chip reset will reset ISP.

Fixes: d65237c7f0860 ("scsi: qla2xxx: Fix mailbox failure while deleting Queue pairs") Cc: stable@vger.kernel.org # 4.10+ Signed-off-by: Himanshu Madhani himanshu.madhani@cavium.com Reviewed-by: Hannes Reinecke hare@suse.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/scsi/qla2xxx/qla_init.c | 4 +--- drivers/scsi/qla2xxx/qla_mid.c | 18 ++++++++++-------- 2 files changed, 11 insertions(+), 11 deletions(-)

--- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -8221,9 +8221,6 @@ int qla2xxx_delete_qpair(struct scsi_qla int ret = QLA_FUNCTION_FAILED; struct qla_hw_data *ha = qpair->hw;

- if (!vha->flags.qpairs_req_created && !vha->flags.qpairs_rsp_created) - goto fail; - qpair->delete_in_progress = 1; while (atomic_read(&qpair->ref_count)) msleep(500); @@ -8231,6 +8228,7 @@ int qla2xxx_delete_qpair(struct scsi_qla ret = qla25xx_delete_req_que(vha, qpair->req); if (ret != QLA_SUCCESS) goto fail; + ret = qla25xx_delete_rsp_que(vha, qpair->rsp); if (ret != QLA_SUCCESS) goto fail; --- a/drivers/scsi/qla2xxx/qla_mid.c +++ b/drivers/scsi/qla2xxx/qla_mid.c @@ -575,14 +575,15 @@ qla25xx_free_rsp_que(struct scsi_qla_hos int qla25xx_delete_req_que(struct scsi_qla_host *vha, struct req_que *req) { - int ret = -1; + int ret = QLA_SUCCESS;

- if (req) { + if (req && vha->flags.qpairs_req_created) { req->options |= BIT_0; ret = qla25xx_init_req_que(vha, req); + if (ret != QLA_SUCCESS) + return QLA_FUNCTION_FAILED; } - if (ret == QLA_SUCCESS) - qla25xx_free_req_que(vha, req); + qla25xx_free_req_que(vha, req);

return ret; } @@ -590,14 +591,15 @@ qla25xx_delete_req_que(struct scsi_qla_h int qla25xx_delete_rsp_que(struct scsi_qla_host *vha, struct rsp_que *rsp) { - int ret = -1; + int ret = QLA_SUCCESS;

- if (rsp) { + if (rsp && vha->flags.qpairs_rsp_created) { rsp->options |= BIT_0; ret = qla25xx_init_rsp_que(vha, rsp); + if (ret != QLA_SUCCESS) + return QLA_FUNCTION_FAILED; } - if (ret == QLA_SUCCESS) - qla25xx_free_rsp_que(vha, rsp); + qla25xx_free_rsp_que(vha, rsp);

return ret; }

Patches currently in stable-queue which might be from himanshu.madhani@cavium.com are

queue-4.15/scsi-qla2xxx-fix-null-pointer-crash-due-to-active-timer-for-abts.patch queue-4.15/scsi-qla2xxx-retry-switch-command-on-time-out.patch queue-4.15/scsi-qla2xxx-relogin-to-target-port-on-a-cable-swap.patch queue-4.15/scsi-qla2xxx-fix-abort-command-deadlock-due-to-spinlock.patch queue-4.15/scsi-qla2xxx-fix-re-login-for-nport-handle-in-use.patch queue-4.15/scsi-qla2xxx-fix-login-state-machine-stuck-at-gpdb.patch queue-4.15/scsi-qla2xxx-fix-system-crash-for-notify-ack-timeout-handling.patch queue-4.15/scsi-qla2xxx-replace-fcport-alloc-with-qla2x00_alloc_fcport.patch queue-4.15/scsi-qla2xxx-clear-loop-id-after-delete.patch queue-4.15/scsi-qla2xxx-defer-processing-of-gs-iocb-calls.patch queue-4.15/scsi-qla2xxx-remove-aborting-els-iocb-call-issued-as-part-of-timeout.patch queue-4.15/scsi-qla2xxx-fix-memory-leak-in-dual-target-mode.patch queue-4.15/scsi-qla2xxx-fix-npiv-host-cleanup-in-target-mode.patch queue-4.15/scsi-qla2xxx-fix-relogin-being-triggered-too-fast.patch queue-4.15/scsi-qla2xxx-skip-irq-affinity-for-target-qpairs.patch queue-4.15/scsi-qla2xxx-fix-scan-state-field-for-fcport.patch queue-4.15/scsi-qla2xxx-fix-prli-state-check.patch queue-4.15/scsi-qla2xxx-fix-recursion-while-sending-terminate-exchange.patch queue-4.15/scsi-qla2xxx-fix-null-pointer-crash-due-to-probe-failure.patch queue-4.15/scsi-qla2xxx-fix-system-crash-in-qlt_plogi_ack_unref.patch queue-4.15/scsi-qla2xxx-serialize-gpnid-for-multiple-rscn.patch queue-4.15/scsi-qla2xxx-fix-gpnid-error-processing.patch queue-4.15/scsi-qla2xxx-move-session-delete-to-driver-work-queue.patch