From: Quentin Schulz quentin.schulz@theobroma-systems.com
[ Upstream commit ed2c66a95c0c5669880aa93d0d34c6e9694b4cbd ]
The micro USB3.0 port available on the Haikou evaluation kit for Puma RK3399-Q7 SoM supports dual-role model (aka drd or OTG) but its support was broken until now because of missing logic around the ID pin.
This adds proper support for USB OTG on Puma Haikou by "connecting" the GPIO used for USB ID to the USB3 controller device.
Cc: Quentin Schulz foss+kernel@0leil.net Signed-off-by: Quentin Schulz quentin.schulz@theobroma-systems.com Link: https://lore.kernel.org/r/20220120125156.16217-1-quentin.schulz@theobroma-sy... Signed-off-by: Heiko Stuebner heiko@sntech.de Signed-off-by: Sasha Levin sashal@kernel.org --- .../arm64/boot/dts/rockchip/rk3399-puma-haikou.dts | 1 + arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 14 ++++++++++++++ 2 files changed, 15 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts index 292bb7e80cf3..3ae5d727e367 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou.dts @@ -232,6 +232,7 @@ &usbdrd3_0 {
&usbdrd_dwc3_0 { dr_mode = "otg"; + extcon = <&extcon_usb3>; status = "okay"; };
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi index fb67db4619ea..002ece51c3ba 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi @@ -25,6 +25,13 @@ module_led: led-0 { }; };
+ extcon_usb3: extcon-usb3 { + compatible = "linux,extcon-usb-gpio"; + id-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&usb3_id>; + }; + clkin_gmac: external-gmac-clock { compatible = "fixed-clock"; clock-frequency = <125000000>; @@ -422,6 +429,13 @@ vcc5v0_host_en: vcc5v0-host-en { <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; }; }; + + usb3 { + usb3_id: usb3-id { + rockchip,pins = + <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; };
&sdhci {
From: Yan Yan evitayan@google.com
[ Upstream commit c1aca3080e382886e2e58e809787441984a2f89b ]
This patch enables distinguishing SAs and SPs based on if_id during the xfrm_migrate flow. This ensures support for xfrm interfaces throughout the SA/SP lifecycle.
When there are multiple existing SPs with the same direction, the same xfrm_selector and different endpoint addresses, xfrm_migrate might fail with ENODATA.
Specifically, the code path for performing xfrm_migrate is: Stage 1: find policy to migrate with xfrm_migrate_policy_find(sel, dir, type, net) Stage 2: find and update state(s) with xfrm_migrate_state_find(mp, net) Stage 3: update endpoint address(es) of template(s) with xfrm_policy_migrate(pol, m, num_migrate)
Currently "Stage 1" always returns the first xfrm_policy that matches, and "Stage 3" looks for the xfrm_tmpl that matches the old endpoint address. Thus if there are multiple xfrm_policy with same selector, direction, type and net, "Stage 1" might rertun a wrong xfrm_policy and "Stage 3" will fail with ENODATA because it cannot find a xfrm_tmpl with the matching endpoint address.
The fix is to allow userspace to pass an if_id and add if_id to the matching rule in Stage 1 and Stage 2 since if_id is a unique ID for xfrm_policy and xfrm_state. For compatibility, if_id will only be checked if the attribute is set.
Tested with additions to Android's kernel unit test suite: https://android-review.googlesource.com/c/kernel/tests/+/1668886
Signed-off-by: Yan Yan evitayan@google.com Signed-off-by: Steffen Klassert steffen.klassert@secunet.com Signed-off-by: Sasha Levin sashal@kernel.org --- include/net/xfrm.h | 5 +++-- net/key/af_key.c | 2 +- net/xfrm/xfrm_policy.c | 14 ++++++++------ net/xfrm/xfrm_state.c | 7 ++++++- net/xfrm/xfrm_user.c | 6 +++++- 5 files changed, 23 insertions(+), 11 deletions(-)
diff --git a/include/net/xfrm.h b/include/net/xfrm.h index 301a164f17e9..358dfe6fefef 100644 --- a/include/net/xfrm.h +++ b/include/net/xfrm.h @@ -1679,14 +1679,15 @@ int km_migrate(const struct xfrm_selector *sel, u8 dir, u8 type, const struct xfrm_migrate *m, int num_bundles, const struct xfrm_kmaddress *k, const struct xfrm_encap_tmpl *encap); -struct xfrm_state *xfrm_migrate_state_find(struct xfrm_migrate *m, struct net *net); +struct xfrm_state *xfrm_migrate_state_find(struct xfrm_migrate *m, struct net *net, + u32 if_id); struct xfrm_state *xfrm_state_migrate(struct xfrm_state *x, struct xfrm_migrate *m, struct xfrm_encap_tmpl *encap); int xfrm_migrate(const struct xfrm_selector *sel, u8 dir, u8 type, struct xfrm_migrate *m, int num_bundles, struct xfrm_kmaddress *k, struct net *net, - struct xfrm_encap_tmpl *encap); + struct xfrm_encap_tmpl *encap, u32 if_id); #endif
int km_new_mapping(struct xfrm_state *x, xfrm_address_t *ipaddr, __be16 sport); diff --git a/net/key/af_key.c b/net/key/af_key.c index de24a7d474df..9bf52a09b5ff 100644 --- a/net/key/af_key.c +++ b/net/key/af_key.c @@ -2623,7 +2623,7 @@ static int pfkey_migrate(struct sock *sk, struct sk_buff *skb, }
return xfrm_migrate(&sel, dir, XFRM_POLICY_TYPE_MAIN, m, i, - kma ? &k : NULL, net, NULL); + kma ? &k : NULL, net, NULL, 0);
out: return err; diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c index 37b149f63262..02099d113a0a 100644 --- a/net/xfrm/xfrm_policy.c +++ b/net/xfrm/xfrm_policy.c @@ -4259,7 +4259,7 @@ static bool xfrm_migrate_selector_match(const struct xfrm_selector *sel_cmp, }
static struct xfrm_policy *xfrm_migrate_policy_find(const struct xfrm_selector *sel, - u8 dir, u8 type, struct net *net) + u8 dir, u8 type, struct net *net, u32 if_id) { struct xfrm_policy *pol, *ret = NULL; struct hlist_head *chain; @@ -4268,7 +4268,8 @@ static struct xfrm_policy *xfrm_migrate_policy_find(const struct xfrm_selector * spin_lock_bh(&net->xfrm.xfrm_policy_lock); chain = policy_hash_direct(net, &sel->daddr, &sel->saddr, sel->family, dir); hlist_for_each_entry(pol, chain, bydst) { - if (xfrm_migrate_selector_match(sel, &pol->selector) && + if ((if_id == 0 || pol->if_id == if_id) && + xfrm_migrate_selector_match(sel, &pol->selector) && pol->type == type) { ret = pol; priority = ret->priority; @@ -4280,7 +4281,8 @@ static struct xfrm_policy *xfrm_migrate_policy_find(const struct xfrm_selector * if ((pol->priority >= priority) && ret) break;
- if (xfrm_migrate_selector_match(sel, &pol->selector) && + if ((if_id == 0 || pol->if_id == if_id) && + xfrm_migrate_selector_match(sel, &pol->selector) && pol->type == type) { ret = pol; break; @@ -4396,7 +4398,7 @@ static int xfrm_migrate_check(const struct xfrm_migrate *m, int num_migrate) int xfrm_migrate(const struct xfrm_selector *sel, u8 dir, u8 type, struct xfrm_migrate *m, int num_migrate, struct xfrm_kmaddress *k, struct net *net, - struct xfrm_encap_tmpl *encap) + struct xfrm_encap_tmpl *encap, u32 if_id) { int i, err, nx_cur = 0, nx_new = 0; struct xfrm_policy *pol = NULL; @@ -4415,14 +4417,14 @@ int xfrm_migrate(const struct xfrm_selector *sel, u8 dir, u8 type, }
/* Stage 1 - find policy */ - if ((pol = xfrm_migrate_policy_find(sel, dir, type, net)) == NULL) { + if ((pol = xfrm_migrate_policy_find(sel, dir, type, net, if_id)) == NULL) { err = -ENOENT; goto out; }
/* Stage 2 - find and update state(s) */ for (i = 0, mp = m; i < num_migrate; i++, mp++) { - if ((x = xfrm_migrate_state_find(mp, net))) { + if ((x = xfrm_migrate_state_find(mp, net, if_id))) { x_cur[nx_cur] = x; nx_cur++; xc = xfrm_state_migrate(x, mp, encap); diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c index 100b4b3723e7..291236d7676f 100644 --- a/net/xfrm/xfrm_state.c +++ b/net/xfrm/xfrm_state.c @@ -1605,7 +1605,8 @@ static struct xfrm_state *xfrm_state_clone(struct xfrm_state *orig, return NULL; }
-struct xfrm_state *xfrm_migrate_state_find(struct xfrm_migrate *m, struct net *net) +struct xfrm_state *xfrm_migrate_state_find(struct xfrm_migrate *m, struct net *net, + u32 if_id) { unsigned int h; struct xfrm_state *x = NULL; @@ -1621,6 +1622,8 @@ struct xfrm_state *xfrm_migrate_state_find(struct xfrm_migrate *m, struct net *n continue; if (m->reqid && x->props.reqid != m->reqid) continue; + if (if_id != 0 && x->if_id != if_id) + continue; if (!xfrm_addr_equal(&x->id.daddr, &m->old_daddr, m->old_family) || !xfrm_addr_equal(&x->props.saddr, &m->old_saddr, @@ -1636,6 +1639,8 @@ struct xfrm_state *xfrm_migrate_state_find(struct xfrm_migrate *m, struct net *n if (x->props.mode != m->mode || x->id.proto != m->proto) continue; + if (if_id != 0 && x->if_id != if_id) + continue; if (!xfrm_addr_equal(&x->id.daddr, &m->old_daddr, m->old_family) || !xfrm_addr_equal(&x->props.saddr, &m->old_saddr, diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c index b10f88822c0d..971ae34b9356 100644 --- a/net/xfrm/xfrm_user.c +++ b/net/xfrm/xfrm_user.c @@ -2607,6 +2607,7 @@ static int xfrm_do_migrate(struct sk_buff *skb, struct nlmsghdr *nlh, int n = 0; struct net *net = sock_net(skb->sk); struct xfrm_encap_tmpl *encap = NULL; + u32 if_id = 0;
if (attrs[XFRMA_MIGRATE] == NULL) return -EINVAL; @@ -2631,7 +2632,10 @@ static int xfrm_do_migrate(struct sk_buff *skb, struct nlmsghdr *nlh, return -ENOMEM; }
- err = xfrm_migrate(&pi->sel, pi->dir, type, m, n, kmp, net, encap); + if (attrs[XFRMA_IF_ID]) + if_id = nla_get_u32(attrs[XFRMA_IF_ID]); + + err = xfrm_migrate(&pi->sel, pi->dir, type, m, n, kmp, net, encap, if_id);
kfree(encap);
From: Yan Yan evitayan@google.com
[ Upstream commit e03c3bba351f99ad932e8f06baa9da1afc418e02 ]
xfrm_migrate cannot handle address family change of an xfrm_state. The symptons are the xfrm_state will be migrated to a wrong address, and sending as well as receiving packets wil be broken.
This commit fixes it by breaking the original xfrm_state_clone method into two steps so as to update the props.family before running xfrm_init_state. As the result, xfrm_state's inner mode, outer mode, type and IP header length in xfrm_state_migrate can be updated with the new address family.
Tested with additions to Android's kernel unit test suite: https://android-review.googlesource.com/c/kernel/tests/+/1885354
Signed-off-by: Yan Yan evitayan@google.com Signed-off-by: Steffen Klassert steffen.klassert@secunet.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/xfrm/xfrm_state.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/net/xfrm/xfrm_state.c b/net/xfrm/xfrm_state.c index 291236d7676f..f7bfa1916968 100644 --- a/net/xfrm/xfrm_state.c +++ b/net/xfrm/xfrm_state.c @@ -1578,9 +1578,6 @@ static struct xfrm_state *xfrm_state_clone(struct xfrm_state *orig, memcpy(&x->mark, &orig->mark, sizeof(x->mark)); memcpy(&x->props.smark, &orig->props.smark, sizeof(x->props.smark));
- if (xfrm_init_state(x) < 0) - goto error; - x->props.flags = orig->props.flags; x->props.extra_flags = orig->props.extra_flags;
@@ -1667,6 +1664,11 @@ struct xfrm_state *xfrm_state_migrate(struct xfrm_state *x, if (!xc) return NULL;
+ xc->props.family = m->new_family; + + if (xfrm_init_state(xc) < 0) + goto error; + memcpy(&xc->id.daddr, &m->new_daddr, sizeof(xc->id.daddr)); memcpy(&xc->props.saddr, &m->new_saddr, sizeof(xc->props.saddr));
From: Jakob Unterwurzacher jakob.unterwurzacher@theobroma-systems.com
[ Upstream commit 62966cbdda8a92f82d966a45aa671e788b2006f7 ]
There are signal integrity issues running the eMMC at 200MHz on Puma RK3399-Q7.
Similar to the work-around found for RK3399 Gru boards, lowering the frequency to 100MHz made the eMMC much more stable, so let's lower the frequency to 100MHz.
It might be possible to run at 150MHz as on RK3399 Gru boards but only 100MHz was extensively tested.
Cc: Quentin Schulz foss+kernel@0leil.net Signed-off-by: Jakob Unterwurzacher jakob.unterwurzacher@theobroma-systems.com Signed-off-by: Quentin Schulz quentin.schulz@theobroma-systems.com Link: https://lore.kernel.org/r/20220119134948.1444965-1-quentin.schulz@theobroma-... Signed-off-by: Heiko Stuebner heiko@sntech.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi index 002ece51c3ba..08fa00364b42 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-puma.dtsi @@ -439,6 +439,12 @@ usb3_id: usb3-id { };
&sdhci { + /* + * Signal integrity isn't great at 200MHz but 100MHz has proven stable + * enough. + */ + max-frequency = <100000000>; + bus-width = <8>; mmc-hs400-1_8v; mmc-hs400-enhanced-strobe;
From: Krzysztof Kozlowski krzysztof.kozlowski@canonical.com
[ Upstream commit 8fd9415042826c7609c588e5ef45f3e84237785f ]
Fixes dtbs_check warnings like:
dmac@ff240000: $nodename:0: 'dmac@ff240000' does not match '^dma-controller(@.*)?$'
Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@canonical.com Link: https://lore.kernel.org/r/20220129175429.298836-1-krzysztof.kozlowski@canoni... Signed-off-by: Heiko Stuebner heiko@sntech.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/rockchip/px30.dtsi | 2 +- arch/arm64/boot/dts/rockchip/rk3328.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/px30.dtsi b/arch/arm64/boot/dts/rockchip/px30.dtsi index 248ebb61aa79..5200d0bbd9e9 100644 --- a/arch/arm64/boot/dts/rockchip/px30.dtsi +++ b/arch/arm64/boot/dts/rockchip/px30.dtsi @@ -711,7 +711,7 @@ rktimer: timer@ff210000 { clock-names = "pclk", "timer"; };
- dmac: dmac@ff240000 { + dmac: dma-controller@ff240000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x0 0xff240000 0x0 0x4000>; interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi index da84be6f4715..3cbe83e6fb9a 100644 --- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi @@ -489,7 +489,7 @@ pwm3: pwm@ff1b0030 { status = "disabled"; };
- dmac: dmac@ff1f0000 { + dmac: dma-controller@ff1f0000 { compatible = "arm,pl330", "arm,primecell"; reg = <0x0 0xff1f0000 0x0 0x4000>; interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
From: Sascha Hauer s.hauer@pengutronix.de
[ Upstream commit 2e8a8b5955a000cc655f7e368670518cbb77fe58 ]
The binding specifies the clock order to "cec", "grf", "vpll". Reorder the clocks accordingly.
Signed-off-by: Sascha Hauer s.hauer@pengutronix.de Link: https://lore.kernel.org/r/20220126145549.617165-19-s.hauer@pengutronix.de Signed-off-by: Heiko Stuebner heiko@sntech.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/rockchip/rk3399.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399.dtsi b/arch/arm64/boot/dts/rockchip/rk3399.dtsi index 3871c7fd83b0..00f1d036dfe0 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399.dtsi @@ -1802,10 +1802,10 @@ hdmi: hdmi@ff940000 { interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH 0>; clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_SFR>, - <&cru PLL_VPLL>, + <&cru SCLK_HDMI_CEC>, <&cru PCLK_VIO_GRF>, - <&cru SCLK_HDMI_CEC>; - clock-names = "iahb", "isfr", "vpll", "grf", "cec"; + <&cru PLL_VPLL>; + clock-names = "iahb", "isfr", "cec", "grf", "vpll"; power-domains = <&power RK3399_PD_HDCP>; reg-io-width = <4>; rockchip,grf = <&grf>;
From: Dinh Nguyen dinguyen@kernel.org
[ Upstream commit 268a491aebc25e6dc7c618903b09ac3a2e8af530 ]
The DWC2 USB controller on the Agilex platform does not support clock gating, so use the chip specific "intel,socfpga-agilex-hsotg" compatible.
Signed-off-by: Dinh Nguyen dinguyen@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/intel/socfpga_agilex.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi index 163f33b46e4f..de1e98c99ec5 100644 --- a/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi +++ b/arch/arm64/boot/dts/intel/socfpga_agilex.dtsi @@ -502,7 +502,7 @@ uart1: serial@ffc02100 { };
usb0: usb@ffb00000 { - compatible = "snps,dwc2"; + compatible = "intel,socfpga-agilex-hsotg", "snps,dwc2"; reg = <0xffb00000 0x40000>; interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; phys = <&usbphy0>; @@ -515,7 +515,7 @@ usb0: usb@ffb00000 { };
usb1: usb@ffb40000 { - compatible = "snps,dwc2"; + compatible = "intel,socfpga-agilex-hsotg", "snps,dwc2"; reg = <0xffb40000 0x40000>; interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; phys = <&usbphy0>;
From: Sascha Hauer s.hauer@pengutronix.de
[ Upstream commit be4e65bdffab5f588044325117df77dad7e9c45a ]
The binding specifies the clock order to "iahb", "isfr", "cec". Reorder the clocks accordingly.
Signed-off-by: Sascha Hauer s.hauer@pengutronix.de Link: https://lore.kernel.org/r/20220210142353.3420859-1-s.hauer@pengutronix.de Signed-off-by: Heiko Stuebner heiko@sntech.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/rk322x.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/rk322x.dtsi b/arch/arm/boot/dts/rk322x.dtsi index 75af99c76d7e..f31cf1df892b 100644 --- a/arch/arm/boot/dts/rk322x.dtsi +++ b/arch/arm/boot/dts/rk322x.dtsi @@ -718,8 +718,8 @@ hdmi: hdmi@200a0000 { interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; assigned-clocks = <&cru SCLK_HDMI_PHY>; assigned-clock-parents = <&hdmi_phy>; - clocks = <&cru SCLK_HDMI_HDCP>, <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_CEC>; - clock-names = "isfr", "iahb", "cec"; + clocks = <&cru PCLK_HDMI_CTRL>, <&cru SCLK_HDMI_HDCP>, <&cru SCLK_HDMI_CEC>; + clock-names = "iahb", "isfr", "cec"; pinctrl-names = "default"; pinctrl-0 = <&hdmii2c_xfer &hdmi_hpd &hdmi_cec>; resets = <&cru SRST_HDMI_P>;
From: Corentin Labbe clabbe@baylibre.com
[ Upstream commit 3916c3619599a3970d3e6f98fb430b7c46266ada ]
crypto-controller had a typo, fix it. In the same time, rename it to just crypto
Signed-off-by: Corentin Labbe clabbe@baylibre.com Acked-by: Krzysztof Kozlowski krzysztof.kozlowski@canonical.com Link: https://lore.kernel.org/r/20220209120355.1985707-1-clabbe@baylibre.com Signed-off-by: Heiko Stuebner heiko@sntech.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/rk3288.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 4dcdcf17c977..66ff5db53c5a 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -971,7 +971,7 @@ i2s: i2s@ff890000 { status = "disabled"; };
- crypto: cypto-controller@ff8a0000 { + crypto: crypto@ff8a0000 { compatible = "rockchip,rk3288-crypto"; reg = <0x0 0xff8a0000 0x0 0x4000>; interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
From: Johannes Berg johannes.berg@intel.com
[ Upstream commit a6bce78262f5dd4b50510f0aa47f3995f7b185f3 ]
If an MFP station isn't authorized, the receiver will (or at least should) drop the action frame since it's a robust management frame, but if we're not authorized we haven't installed keys yet. Refuse attempts to start a session as they'd just time out.
Signed-off-by: Johannes Berg johannes.berg@intel.com Link: https://lore.kernel.org/r/20220203201528.ff4d5679dce9.I34bb1f2bc341e161af2d6... Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/mac80211/agg-tx.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)
diff --git a/net/mac80211/agg-tx.c b/net/mac80211/agg-tx.c index 74a878f213d3..1deb3d874a4b 100644 --- a/net/mac80211/agg-tx.c +++ b/net/mac80211/agg-tx.c @@ -9,7 +9,7 @@ * Copyright 2007, Michael Wu flamingice@sourmilk.net * Copyright 2007-2010, Intel Corporation * Copyright(c) 2015-2017 Intel Deutschland GmbH - * Copyright (C) 2018 - 2021 Intel Corporation + * Copyright (C) 2018 - 2022 Intel Corporation */
#include <linux/ieee80211.h> @@ -626,6 +626,14 @@ int ieee80211_start_tx_ba_session(struct ieee80211_sta *pubsta, u16 tid, return -EINVAL; }
+ if (test_sta_flag(sta, WLAN_STA_MFP) && + !test_sta_flag(sta, WLAN_STA_AUTHORIZED)) { + ht_dbg(sdata, + "MFP STA not authorized - deny BA session request %pM tid %d\n", + sta->sta.addr, tid); + return -EINVAL; + } + /* * 802.11n-2009 11.5.1.1: If the initiating STA is an HT STA, is a * member of an IBSS, and has no other existing Block Ack agreement
From: Alexander Lobakin alobakin@pm.me
[ Upstream commit f2703def339c793674010cc9f01bfe4980231808 ]
After enabling CONFIG_SCHED_CORE (landed during 5.14 cycle), 2-core 2-thread-per-core interAptiv (CPS-driven) started emitting the following:
[ 0.025698] CPU1 revision is: 0001a120 (MIPS interAptiv (multi)) [ 0.048183] ------------[ cut here ]------------ [ 0.048187] WARNING: CPU: 1 PID: 0 at kernel/sched/core.c:6025 sched_core_cpu_starting+0x198/0x240 [ 0.048220] Modules linked in: [ 0.048233] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.17.0-rc3+ #35 b7b319f24073fd9a3c2aa7ad15fb7993eec0b26f [ 0.048247] Stack : 817f0000 00000004 327804c8 810eb050 00000000 00000004 00000000 c314fdd1 [ 0.048278] 830cbd64 819c0000 81800000 817f0000 83070bf4 00000001 830cbd08 00000000 [ 0.048307] 00000000 00000000 815fcbc4 00000000 00000000 00000000 00000000 00000000 [ 0.048334] 00000000 00000000 00000000 00000000 817f0000 00000000 00000000 817f6f34 [ 0.048361] 817f0000 818a3c00 817f0000 00000004 00000000 00000000 4dc33260 0018c933 [ 0.048389] ... [ 0.048396] Call Trace: [ 0.048399] [<8105a7bc>] show_stack+0x3c/0x140 [ 0.048424] [<8131c2a0>] dump_stack_lvl+0x60/0x80 [ 0.048440] [<8108b5c0>] __warn+0xc0/0xf4 [ 0.048454] [<8108b658>] warn_slowpath_fmt+0x64/0x10c [ 0.048467] [<810bd418>] sched_core_cpu_starting+0x198/0x240 [ 0.048483] [<810c6514>] sched_cpu_starting+0x14/0x80 [ 0.048497] [<8108c0f8>] cpuhp_invoke_callback_range+0x78/0x140 [ 0.048510] [<8108d914>] notify_cpu_starting+0x94/0x140 [ 0.048523] [<8106593c>] start_secondary+0xbc/0x280 [ 0.048539] [ 0.048543] ---[ end trace 0000000000000000 ]--- [ 0.048636] Synchronize counters for CPU 1: done.
...for each but CPU 0/boot. Basic debug printks right before the mentioned line say:
[ 0.048170] CPU: 1, smt_mask:
So smt_mask, which is sibling mask obviously, is empty when entering the function. This is critical, as sched_core_cpu_starting() calculates core-scheduling parameters only once per CPU start, and it's crucial to have all the parameters filled in at that moment (at least it uses cpu_smt_mask() which in fact is `&cpu_sibling_map[cpu]` on MIPS).
A bit of debugging led me to that set_cpu_sibling_map() performing the actual map calculation, was being invocated after notify_cpu_start(), and exactly the latter function starts CPU HP callback round (sched_core_cpu_starting() is basically a CPU HP callback). While the flow is same on ARM64 (maps after the notifier, although before calling set_cpu_online()), x86 started calculating sibling maps earlier than starting the CPU HP callbacks in Linux 4.14 (see [0] for the reference). Neither me nor my brief tests couldn't find any potential caveats in calculating the maps right after performing delay calibration, but the WARN splat is now gone. The very same debug prints now yield exactly what I expected from them:
[ 0.048433] CPU: 1, smt_mask: 0-1
[0] https://git.kernel.org/pub/scm/linux/kernel/git/mips/linux.git/commit/?id=76...
Signed-off-by: Alexander Lobakin alobakin@pm.me Reviewed-by: Philippe Mathieu-Daudé f4bug@amsat.org Signed-off-by: Thomas Bogendoerfer tsbogend@alpha.franken.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/mips/kernel/smp.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c index d542fb7af3ba..1986d1309410 100644 --- a/arch/mips/kernel/smp.c +++ b/arch/mips/kernel/smp.c @@ -351,6 +351,9 @@ asmlinkage void start_secondary(void) cpu = smp_processor_id(); cpu_data[cpu].udelay_val = loops_per_jiffy;
+ set_cpu_sibling_map(cpu); + set_cpu_core_map(cpu); + cpumask_set_cpu(cpu, &cpu_coherent_mask); notify_cpu_starting(cpu);
@@ -362,9 +365,6 @@ asmlinkage void start_secondary(void) /* The CPU is running and counters synchronised, now mark it online */ set_cpu_online(cpu, true);
- set_cpu_sibling_map(cpu); - set_cpu_core_map(cpu); - calculate_cpu_foreign_map();
/*
From: Julian Braha julianbraha@gmail.com
[ Upstream commit 11c57c3ba94da74c3446924260e34e0b1950b5d7 ]
Resending this to properly add it to the patch tracker - thanks for letting me know, Arnd :)
When ARM is enabled, and BITREVERSE is disabled, Kbuild gives the following warning:
WARNING: unmet direct dependencies detected for HAVE_ARCH_BITREVERSE Depends on [n]: BITREVERSE [=n] Selected by [y]: - ARM [=y] && (CPU_32v7M [=n] || CPU_32v7 [=y]) && !CPU_32v6 [=n]
This is because ARM selects HAVE_ARCH_BITREVERSE without selecting BITREVERSE, despite HAVE_ARCH_BITREVERSE depending on BITREVERSE.
This unmet dependency bug was found by Kismet, a static analysis tool for Kconfig. Please advise if this is not the appropriate solution.
Signed-off-by: Julian Braha julianbraha@gmail.com Signed-off-by: Russell King (Oracle) rmk+kernel@armlinux.org.uk Signed-off-by: Sasha Levin sashal@kernel.org --- lib/Kconfig | 1 - 1 file changed, 1 deletion(-)
diff --git a/lib/Kconfig b/lib/Kconfig index 5e7165e6a346..fa4b10322efc 100644 --- a/lib/Kconfig +++ b/lib/Kconfig @@ -45,7 +45,6 @@ config BITREVERSE config HAVE_ARCH_BITREVERSE bool default n - depends on BITREVERSE help This option enables the use of hardware bit-reversal instructions on architectures which support such operations.
From: Luiz Augusto von Dentz luiz.von.dentz@intel.com
[ Upstream commit dd3b1dc3dd050f1f47cd13e300732852414270f8 ]
sent_cmd memory is not freed before freeing hci_dev causing it to leak it contents.
Signed-off-by: Luiz Augusto von Dentz luiz.von.dentz@intel.com Signed-off-by: Marcel Holtmann marcel@holtmann.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/bluetooth/hci_core.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index 53f1b08017aa..c67390367cc2 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -4083,6 +4083,7 @@ void hci_release_dev(struct hci_dev *hdev) hci_dev_unlock(hdev);
ida_simple_remove(&hci_index_ida, hdev->id); + kfree_skb(hdev->sent_cmd); kfree(hdev); } EXPORT_SYMBOL(hci_release_dev);
From: Lad Prabhakar prabhakar.mahadev-lad.rj@bp.renesas.com
[ Upstream commit c5048a7b2c23ab589f3476a783bd586b663eda5b ]
Register the CAN device only when all the necessary initialization is completed. This patch makes sure all the data structures and locks are initialized before registering the CAN device.
Link: https://lore.kernel.org/all/20220221225935.12300-1-prabhakar.mahadev-lad.rj@... Reported-by: Pavel Machek pavel@denx.de Signed-off-by: Lad Prabhakar prabhakar.mahadev-lad.rj@bp.renesas.com Reviewed-by: Pavel Machek pavel@denx.de Reviewed-by: Ulrich Hecht uli+renesas@fpond.eu Signed-off-by: Marc Kleine-Budde mkl@pengutronix.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/can/rcar/rcar_canfd.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/can/rcar/rcar_canfd.c b/drivers/net/can/rcar/rcar_canfd.c index 388521e70837..2f44c567ebd7 100644 --- a/drivers/net/can/rcar/rcar_canfd.c +++ b/drivers/net/can/rcar/rcar_canfd.c @@ -1720,15 +1720,15 @@ static int rcar_canfd_channel_probe(struct rcar_canfd_global *gpriv, u32 ch,
netif_napi_add(ndev, &priv->napi, rcar_canfd_rx_poll, RCANFD_NAPI_WEIGHT); + spin_lock_init(&priv->tx_lock); + devm_can_led_init(ndev); + gpriv->ch[priv->channel] = priv; err = register_candev(ndev); if (err) { dev_err(&pdev->dev, "register_candev() failed, error %d\n", err); goto fail_candev; } - spin_lock_init(&priv->tx_lock); - devm_can_led_init(ndev); - gpriv->ch[priv->channel] = priv; dev_info(&pdev->dev, "device registered (channel %u)\n", priv->channel); return 0;
From: Casper Andersson casper.casan@gmail.com
[ Upstream commit 90d4025285748448809701a44cf466a3f5443eaa ]
main.h uses NUM_TARGETS from main_regs.h, but the missing include never causes any errors because everywhere main.h is (currently) included, main_regs.h is included before. But since it is dependent on main_regs.h it should always be included.
Signed-off-by: Casper Andersson casper.casan@gmail.com Reviewed-by: Joacim Zetterling joacim.zetterling@westermo.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/microchip/sparx5/sparx5_main.h | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/microchip/sparx5/sparx5_main.h b/drivers/net/ethernet/microchip/sparx5/sparx5_main.h index a1acc9b461f2..d40e18ce3293 100644 --- a/drivers/net/ethernet/microchip/sparx5/sparx5_main.h +++ b/drivers/net/ethernet/microchip/sparx5/sparx5_main.h @@ -16,6 +16,8 @@ #include <linux/phylink.h> #include <linux/hrtimer.h>
+#include "sparx5_main_regs.h" + /* Target chip type */ enum spx5_target_chiptype { SPX5_TARGET_CT_7546 = 0x7546, /* SparX-5-64 Enterprise */
From: Jia-Ju Bai baijiaju1990@gmail.com
[ Upstream commit d4e26aaea7f82ba884dcb4acfe689406bc092dc3 ]
The function ioremap() in fs_init() can fail, so its return value should be checked.
Reported-by: TOTE Robot oslab@tsinghua.edu.cn Signed-off-by: Jia-Ju Bai baijiaju1990@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/atm/firestream.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/atm/firestream.c b/drivers/atm/firestream.c index 3bc3c314a467..4f67404fe64c 100644 --- a/drivers/atm/firestream.c +++ b/drivers/atm/firestream.c @@ -1676,6 +1676,8 @@ static int fs_init(struct fs_dev *dev) dev->hw_base = pci_resource_start(pci_dev, 0);
dev->base = ioremap(dev->hw_base, 0x1000); + if (!dev->base) + return 1;
reset_chip (dev);
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit d982992669733dd75520000c6057d8ee0725a363 ]
ACPI/x86 devices with a Cherry Trail SoC should have a GpioInt + a regular GPIO ACPI resource in their ACPI tables.
Some CHT devices have a bug, where the also is bogus interrupt resource (likely copied from a previous Bay Trail based generation of the device).
The i2c-core-acpi code will assign the bogus, non-working, interrupt resource to client->irq. Add a workaround to fix this up.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=2043960 Signed-off-by: Hans de Goede hdegoede@redhat.com Link: https://lore.kernel.org/r/20220228111613.363336-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/input/touchscreen/goodix.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-)
diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c index 5051a1766aac..18021ae8183d 100644 --- a/drivers/input/touchscreen/goodix.c +++ b/drivers/input/touchscreen/goodix.c @@ -784,7 +784,7 @@ static int goodix_add_acpi_gpio_mappings(struct goodix_ts_data *ts) const struct acpi_gpio_mapping *gpio_mapping = NULL; struct device *dev = &ts->client->dev; LIST_HEAD(resources); - int ret; + int irq, ret;
ts->gpio_count = 0; ts->gpio_int_idx = -1; @@ -797,6 +797,20 @@ static int goodix_add_acpi_gpio_mappings(struct goodix_ts_data *ts)
acpi_dev_free_resource_list(&resources);
+ /* + * CHT devices should have a GpioInt + a regular GPIO ACPI resource. + * Some CHT devices have a bug (where the also is bogus Interrupt + * resource copied from a previous BYT based generation). i2c-core-acpi + * will use the non-working Interrupt resource, fix this up. + */ + if (soc_intel_is_cht() && ts->gpio_count == 2 && ts->gpio_int_idx != -1) { + irq = acpi_dev_gpio_irq_get(ACPI_COMPANION(dev), 0); + if (irq > 0 && irq != ts->client->irq) { + dev_warn(dev, "Overriding IRQ %d -> %d\n", ts->client->irq, irq); + ts->client->irq = irq; + } + } + if (ts->gpio_count == 2 && ts->gpio_int_idx == 0) { ts->irq_pin_access_method = IRQ_PIN_ACCESS_ACPI_GPIO; gpio_mapping = acpi_goodix_int_first_gpios;
From: Golan Ben Ami golan.ben.ami@intel.com
[ Upstream commit 1db5fcbba2631277b78d7f8aff99c9607d29f6d8 ]
Some APs misbehave when TWT is used and cause our firmware to crash. We don't know a reasonable way to detect and work around this problem in the FW yet. To prevent these crashes, disable TWT in the driver by stopping to advertise TWT support.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215523 Signed-off-by: Golan Ben Ami golan.ben.ami@intel.com [reworded the commit message] Signed-off-by: Luca Coelho luciano.coelho@intel.com Link: https://lore.kernel.org/r/20220301072926.153969-1-luca@coelho.fi Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c | 3 +-- drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c | 1 - 2 files changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c b/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c index 475f951d4b1e..fc40cca096c2 100644 --- a/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c +++ b/drivers/net/wireless/intel/iwlwifi/iwl-nvm-parse.c @@ -541,8 +541,7 @@ static const struct ieee80211_sband_iftype_data iwl_he_capa[] = { .has_he = true, .he_cap_elem = { .mac_cap_info[0] = - IEEE80211_HE_MAC_CAP0_HTC_HE | - IEEE80211_HE_MAC_CAP0_TWT_REQ, + IEEE80211_HE_MAC_CAP0_HTC_HE, .mac_cap_info[1] = IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_16US | IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_8, diff --git a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c index 750217393f48..56c7a68a6491 100644 --- a/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c @@ -295,7 +295,6 @@ static const u8 he_if_types_ext_capa_sta[] = { [0] = WLAN_EXT_CAPA1_EXT_CHANNEL_SWITCHING, [2] = WLAN_EXT_CAPA3_MULTI_BSSID_SUPPORT, [7] = WLAN_EXT_CAPA8_OPMODE_NOTIF, - [9] = WLAN_EXT_CAPA10_TWT_REQUESTER_SUPPORT, };
static const struct wiphy_iftype_ext_capab he_iftypes_ext_capa[] = {
From: Manasi Navare manasi.d.navare@intel.com
[ Upstream commit 62929726ef0ec72cbbe9440c5d125d4278b99894 ]
VRR capable property is not attached by default to the connector It is attached only if VRR is supported. So if the driver tries to call drm core set prop function without it being attached that causes NULL dereference.
Cc: Jani Nikula jani.nikula@intel.com Cc: Ville Syrjälä ville.syrjala@linux.intel.com Cc: dri-devel@lists.freedesktop.org Signed-off-by: Manasi Navare manasi.d.navare@intel.com Reviewed-by: Ville Syrjälä ville.syrjala@linux.intel.com Link: https://patchwork.freedesktop.org/patch/msgid/20220225013055.9282-1-manasi.d... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/drm_connector.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c index 2ba257b1ae20..e9b7926d9b66 100644 --- a/drivers/gpu/drm/drm_connector.c +++ b/drivers/gpu/drm/drm_connector.c @@ -2233,6 +2233,9 @@ EXPORT_SYMBOL(drm_connector_atomic_hdr_metadata_equal); void drm_connector_set_vrr_capable_property( struct drm_connector *connector, bool capable) { + if (!connector->vrr_capable_property) + return; + drm_object_property_set_value(&connector->base, connector->vrr_capable_property, capable);
From: Sreeramya Soratkal quic_ssramya@quicinc.com
[ Upstream commit e50b88c4f076242358b66ddb67482b96947438f2 ]
The wdev channel information is updated post channel switch only for the station mode and not for the other modes. Due to this, the P2P client still points to the old value though it moved to the new channel when the channel change is induced from the P2P GO.
Update the bss channel after CSA channel switch completion for P2P client interface as well.
Signed-off-by: Sreeramya Soratkal quic_ssramya@quicinc.com Link: https://lore.kernel.org/r/1646114600-31479-1-git-send-email-quic_ssramya@qui... Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/wireless/nl80211.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 99564db14aa1..2f9ead98a9da 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -17525,7 +17525,8 @@ void cfg80211_ch_switch_notify(struct net_device *dev, wdev->chandef = *chandef; wdev->preset_chandef = *chandef;
- if (wdev->iftype == NL80211_IFTYPE_STATION && + if ((wdev->iftype == NL80211_IFTYPE_STATION || + wdev->iftype == NL80211_IFTYPE_P2P_CLIENT) && !WARN_ON(!wdev->current_bss)) cfg80211_update_assoc_bss_entry(wdev, chandef->chan);
From: Eric Dumazet edumazet@google.com
[ Upstream commit e3d5ea2c011ecb16fb94c56a659364e6b30fac94 ]
If recv_actor() returns an incorrect value, tcp_read_sock() might loop forever.
Instead, issue a one time warning and make sure to make progress.
Signed-off-by: Eric Dumazet edumazet@google.com Acked-by: John Fastabend john.fastabend@gmail.com Acked-by: Jakub Sitnicki jakub@cloudflare.com Acked-by: Daniel Borkmann daniel@iogearbox.net Link: https://lore.kernel.org/r/20220302161723.3910001-2-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/ipv4/tcp.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index f48f1059b31a..ef68d55e0944 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -1663,11 +1663,13 @@ int tcp_read_sock(struct sock *sk, read_descriptor_t *desc, if (!copied) copied = used; break; - } else if (used <= len) { - seq += used; - copied += used; - offset += used; } + if (WARN_ON_ONCE(used > len)) + used = len; + seq += used; + copied += used; + offset += used; + /* If recv_actor drops the lock (e.g. TCP splice * receive) the skb pointer might be invalid when * getting here: tcp_collapse might have deleted it
From: Niels Dossche dossche.niels@gmail.com
[ Upstream commit f1fb205efb0ccca55626fd4ef38570dd16b44719 ]
seqno could be read as a stale value outside of the lock. The lock is already acquired to protect the modification of seqno against a possible race condition. Place the reading of this value also inside this locking to protect it against a possible race condition.
Signed-off-by: Niels Dossche dossche.niels@gmail.com Acked-by: Martin Habets habetsm.xilinx@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/sfc/mcdi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/sfc/mcdi.c b/drivers/net/ethernet/sfc/mcdi.c index be6bfd6b7ec7..50baf62b2cbc 100644 --- a/drivers/net/ethernet/sfc/mcdi.c +++ b/drivers/net/ethernet/sfc/mcdi.c @@ -163,9 +163,9 @@ static void efx_mcdi_send_request(struct efx_nic *efx, unsigned cmd, /* Serialise with efx_mcdi_ev_cpl() and efx_mcdi_ev_death() */ spin_lock_bh(&mcdi->iface_lock); ++mcdi->seqno; + seqno = mcdi->seqno & SEQ_MASK; spin_unlock_bh(&mcdi->iface_lock);
- seqno = mcdi->seqno & SEQ_MASK; xflags = 0; if (mcdi->mode == MCDI_MODE_EVENTS) xflags |= MCDI_HEADER_XFLAGS_EVREQ;
From: Christophe JAILLET christophe.jaillet@wanadoo.fr
[ Upstream commit 8ccffe9ac3239e549beaa0a9d5e1a1eac94e866c ]
Fix an error message and report the correct failing function.
Signed-off-by: Christophe JAILLET christophe.jaillet@wanadoo.fr Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/broadcom/bnx2.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c index 8c83973adca5..9d70d908c064 100644 --- a/drivers/net/ethernet/broadcom/bnx2.c +++ b/drivers/net/ethernet/broadcom/bnx2.c @@ -8212,7 +8212,7 @@ bnx2_init_board(struct pci_dev *pdev, struct net_device *dev) rc = dma_set_coherent_mask(&pdev->dev, persist_dma_mask); if (rc) { dev_err(&pdev->dev, - "pci_set_consistent_dma_mask failed, aborting\n"); + "dma_set_coherent_mask failed, aborting\n"); goto err_out_unmap; } } else if ((rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32))) != 0) {
From: Chengming Zhou zhouchengming@bytedance.com
[ Upstream commit b773827e361952b3f53ac6fa4c4e39ccd632102e ]
The error message when I build vm tests on debian10 (GLIBC 2.28):
userfaultfd.c: In function `userfaultfd_pagemap_test': userfaultfd.c:1393:37: error: `MADV_PAGEOUT' undeclared (first use in this function); did you mean `MADV_RANDOM'? if (madvise(area_dst, test_pgsize, MADV_PAGEOUT)) ^~~~~~~~~~~~ MADV_RANDOM
This patch includes these newer definitions from UAPI linux/mman.h, is useful to fix tests build on systems without these definitions in glibc sys/mman.h.
Link: https://lkml.kernel.org/r/20220227055330.43087-2-zhouchengming@bytedance.com Signed-off-by: Chengming Zhou zhouchengming@bytedance.com Reviewed-by: Shuah Khan skhan@linuxfoundation.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/vm/userfaultfd.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/tools/testing/selftests/vm/userfaultfd.c b/tools/testing/selftests/vm/userfaultfd.c index 81690f1737c8..138b011c667e 100644 --- a/tools/testing/selftests/vm/userfaultfd.c +++ b/tools/testing/selftests/vm/userfaultfd.c @@ -46,6 +46,7 @@ #include <signal.h> #include <poll.h> #include <string.h> +#include <linux/mman.h> #include <sys/mman.h> #include <sys/syscall.h> #include <sys/ioctl.h>
linux-stable-mirror@lists.linaro.org
-
Sasha Levin