4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ard Biesheuvel ard.biesheuvel@linaro.org

commit ac1e55b1fdb27c1b07a0a6fe519f1291ff1e7d40 upstream.

Modules such as nouveau.ko and i915.ko have a link time dependency on acpi_lid_open(), and due to its use of acpi_bus_register_driver(), the button.ko module that provides it is only loadable when booted in ACPI mode. However, the ACPI button driver can be built into the core kernel as well, in which case the dependency can always be satisfied, and the dependent modules can be loaded regardless of whether the system was booted in ACPI mode or not.

So let's fix this asymmetry by making the ACPI button driver loadable as a module even if not booted in ACPI mode, so it can provide the acpi_lid_open() symbol in the same way as when built into the kernel.

Signed-off-by: Ard Biesheuvel ard.biesheuvel@linaro.org [ rjw: Minor adjustments of comments, whitespace and names. ] Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/acpi/button.c | 24 +++++++++++++++++++++++- 1 file changed, 23 insertions(+), 1 deletion(-)

--- a/drivers/acpi/button.c +++ b/drivers/acpi/button.c @@ -635,4 +635,26 @@ module_param_call(lid_init_state, NULL, 0644); MODULE_PARM_DESC(lid_init_state, "Behavior for reporting LID initial state");

-module_acpi_driver(acpi_button_driver); +static int acpi_button_register_driver(struct acpi_driver *driver) +{ + /* + * Modules such as nouveau.ko and i915.ko have a link time dependency + * on acpi_lid_open(), and would therefore not be loadable on ACPI + * capable kernels booted in non-ACPI mode if the return value of + * acpi_bus_register_driver() is returned from here with ACPI disabled + * when this driver is built as a module. + */ + if (acpi_disabled) + return 0; + + return acpi_bus_register_driver(driver); +} + +static void acpi_button_unregister_driver(struct acpi_driver *driver) +{ + if (!acpi_disabled) + acpi_bus_unregister_driver(driver); +} + +module_driver(acpi_button_driver, acpi_button_register_driver, + acpi_button_unregister_driver);

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Takashi Iwai tiwai@suse.de

commit 6a30abaa40b62aed46ef12ea4c16c48565bdb376 upstream.

The commit c469652bb5e8 ("ALSA: hda - Use IS_REACHABLE() for dependency on input") simplified the dependencies with IS_REACHABLE() macro, but it broke due to its incorrect usage: it should have been IS_REACHABLE(CONFIG_INPUT) instead of IS_REACHABLE(INPUT).

Fixes: c469652bb5e8 ("ALSA: hda - Use IS_REACHABLE() for dependency on input") Cc: stable@vger.kernel.org Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- sound/pci/hda/patch_realtek.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -3832,7 +3832,7 @@ static void alc280_fixup_hp_gpio4(struct } }

-#if IS_REACHABLE(INPUT) +#if IS_REACHABLE(CONFIG_INPUT) static void gpio2_mic_hotkey_event(struct hda_codec *codec, struct hda_jack_callback *event) {

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Takashi Iwai tiwai@suse.de

commit 8f22e52528cc372b218b5f100457469615c733ce upstream.

The sequencer virmidi code has an open race at its output trigger callback: namely, virmidi keeps only one event packet for processing while it doesn't protect for concurrent output trigger calls.

snd_virmidi_output_trigger() tries to process the previously unfinished event before starting encoding the given MIDI stream, but this is done without any lock. Meanwhile, if another rawmidi stream starts the output trigger, this proceeds further, and overwrites the event package that is being processed in another thread. This eventually corrupts and may lead to the invalid memory access if the event type is like SYSEX.

The fix is just to move the spinlock to cover both the pending event and the new stream.

The bug was spotted by a new fuzzer, RaceFuzzer.

BugLink: http://lkml.kernel.org/r/20180426045223.GA15307@dragonet.kaist.ac.kr Reported-by: DaeRyong Jeong threeearcat@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- sound/core/seq/seq_virmidi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/sound/core/seq/seq_virmidi.c +++ b/sound/core/seq/seq_virmidi.c @@ -174,12 +174,12 @@ static void snd_virmidi_output_trigger(s } return; } + spin_lock_irqsave(&substream->runtime->lock, flags); if (vmidi->event.type != SNDRV_SEQ_EVENT_NONE) { if (snd_seq_kernel_client_dispatch(vmidi->client, &vmidi->event, in_atomic(), 0) < 0) - return; + goto out; vmidi->event.type = SNDRV_SEQ_EVENT_NONE; } - spin_lock_irqsave(&substream->runtime->lock, flags); while (1) { count = __snd_rawmidi_transmit_peek(substream, buf, sizeof(buf)); if (count <= 0)

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Robert Rosengren robert.rosengren@axis.com

commit 306a4f3ca7f3c7dfa473ebd19d66e40e59d99734 upstream.

Show paused ALSA aloop device as inactive, i.e. the control "PCM Slave Active" set as false. Notification sent upon state change.

This makes it possible for client capturing from aloop device to know if data is expected. Without it the client expects data even if playback is paused.

Signed-off-by: Robert Rosengren robert.rosengren@axis.com Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- sound/drivers/aloop.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-)

--- a/sound/drivers/aloop.c +++ b/sound/drivers/aloop.c @@ -296,6 +296,8 @@ static int loopback_trigger(struct snd_p cable->pause |= stream; loopback_timer_stop(dpcm); spin_unlock(&cable->lock); + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + loopback_active_notify(dpcm); break; case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: case SNDRV_PCM_TRIGGER_RESUME: @@ -304,6 +306,8 @@ static int loopback_trigger(struct snd_p cable->pause &= ~stream; loopback_timer_start(dpcm); spin_unlock(&cable->lock); + if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) + loopback_active_notify(dpcm); break; default: return -EINVAL; @@ -892,9 +896,11 @@ static int loopback_active_get(struct sn [kcontrol->id.subdevice][kcontrol->id.device ^ 1]; unsigned int val = 0;

- if (cable != NULL) - val = (cable->running & (1 << SNDRV_PCM_STREAM_PLAYBACK)) ? - 1 : 0; + if (cable != NULL) { + unsigned int running = cable->running ^ cable->pause; + + val = (running & (1 << SNDRV_PCM_STREAM_PLAYBACK)) ? 1 : 0; + } ucontrol->value.integer.value[0] = val; return 0; }

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Matthew Wilcox willy@infradead.org

commit b4678df184b314a2bd47d2329feca2c2534aa12b upstream.

The errseq_t infrastructure assumes that errors which occurred before the file descriptor was opened are of no interest to the application. This turns out to be a regression for some applications, notably Postgres.

Before errseq_t, a writeback error would be reported exactly once (as long as the inode remained in memory), so Postgres could open a file, call fsync() and find out whether there had been a writeback error on that file from another process.

This patch changes the errseq infrastructure to report errors to all file descriptors which are opened after the error occurred, but before it was reported to any file descriptor. This restores the user-visible behaviour.

Cc: stable@vger.kernel.org Fixes: 5660e13d2fd6 ("fs: new infrastructure for writeback error handling and reporting") Signed-off-by: Matthew Wilcox mawilcox@microsoft.com Reviewed-by: Jeff Layton jlayton@kernel.org Signed-off-by: Jeff Layton jlayton@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- lib/errseq.c | 23 +++++++++-------------- 1 file changed, 9 insertions(+), 14 deletions(-)

--- a/lib/errseq.c +++ b/lib/errseq.c @@ -111,27 +111,22 @@ EXPORT_SYMBOL(errseq_set); * errseq_sample() - Grab current errseq_t value. * @eseq: Pointer to errseq_t to be sampled. * - * This function allows callers to sample an errseq_t value, marking it as - * "seen" if required. + * This function allows callers to initialise their errseq_t variable. + * If the error has been "seen", new callers will not see an old error. + * If there is an unseen error in @eseq, the caller of this function will + * see it the next time it checks for an error. * + * Context: Any context. * Return: The current errseq value. */ errseq_t errseq_sample(errseq_t *eseq) { errseq_t old = READ_ONCE(*eseq); - errseq_t new = old;

- /* - * For the common case of no errors ever having been set, we can skip - * marking the SEEN bit. Once an error has been set, the value will - * never go back to zero. - */ - if (old != 0) { - new |= ERRSEQ_SEEN; - if (old != new) - cmpxchg(eseq, old, new); - } - return new; + /* If nobody has seen this error yet, then we can be the first. */ + if (!(old & ERRSEQ_SEEN)) + old = 0; + return old; } EXPORT_SYMBOL(errseq_sample);

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Bryant G Ly bryantly@linux.vnet.ibm.com

commit f5957dade4f373b04fa1f5315a489f18cc2c4cb4 upstream.

memcmp() requires the two buffers passed as arguments to be at least 'size' bytes long, otherwise a fortify_panic will trigger.

Use memchr_inv() instead of memcmp() to determine whether the received payload is zeroed or not.

The bug was found by running a block backstore via LIO.

[ 496.212958] Call Trace: [ 496.212960] [c0000007e58e3800] [c000000000cbbefc] fortify_panic+0x24/0x38 (unreliable) [ 496.212965] [c0000007e58e3860] [d00000000f150c28] iblock_execute_write_same+0x3b8/0x3c0 [target_core_iblock] [ 496.212976] [c0000007e58e3910] [d000000006c737d4] __target_execute_cmd+0x54/0x150 [target_core_mod] [ 496.212982] [c0000007e58e3940] [d000000006d32ce4] ibmvscsis_write_pending+0x74/0xe0 [ibmvscsis] [ 496.212991] [c0000007e58e39b0] [d000000006c74fc8] transport_generic_new_cmd+0x318/0x370 [target_core_mod] [ 496.213001] [c0000007e58e3a30] [d000000006c75084] transport_handle_cdb_direct+0x64/0xd0 [target_core_mod] [ 496.213011] [c0000007e58e3aa0] [d000000006c75298] target_submit_cmd_map_sgls+0x1a8/0x320 [target_core_mod] [ 496.213021] [c0000007e58e3b30] [d000000006c75458] target_submit_cmd+0x48/0x60 [target_core_mod] [ 496.213026] [c0000007e58e3bd0] [d000000006d34c20] ibmvscsis_scheduler+0x370/0x600 [ibmvscsis] [ 496.213031] [c0000007e58e3c90] [c00000000013135c] process_one_work+0x1ec/0x580 [ 496.213035] [c0000007e58e3d20] [c000000000131798] worker_thread+0xa8/0x600 [ 496.213039] [c0000007e58e3dc0] [c00000000013a468] kthread+0x168/0x1b0 [ 496.213044] [c0000007e58e3e30] [c00000000000b528] ret_from_kernel_thread+0x5c/0xb4

[mkp: tweaked commit message]

Fixes: 2237498f0b5c ("target/iblock: Convert WRITE_SAME to blkdev_issue_zeroout") Signed-off-by: Bryant G. Ly bryantly@linux.vnet.ibm.com Reviewed-by: Steven Royer seroyer@linux.vnet.ibm.com Tested-by: Taylor Jakobson tjakobs@us.ibm.com Cc: Christoph Hellwig hch@lst.de Cc: Nicholas Bellinger nab@linux-iscsi.org Cc: stable@vger.kernel.org # v4.13+ Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/target/target_core_iblock.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/drivers/target/target_core_iblock.c +++ b/drivers/target/target_core_iblock.c @@ -427,8 +427,8 @@ iblock_execute_zero_out(struct block_dev { struct se_device *dev = cmd->se_dev; struct scatterlist *sg = &cmd->t_data_sg[0]; - unsigned char *buf, zero = 0x00, *p = &zero; - int rc, ret; + unsigned char *buf, *not_zero; + int ret;

buf = kmap(sg_page(sg)) + sg->offset; if (!buf) @@ -437,10 +437,10 @@ iblock_execute_zero_out(struct block_dev * Fall back to block_execute_write_same() slow-path if * incoming WRITE_SAME payload does not contain zeros. */ - rc = memcmp(buf, p, cmd->data_length); + not_zero = memchr_inv(buf, 0x00, cmd->data_length); kunmap(sg_page(sg));

- if (rc) + if (not_zero) return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;

ret = blkdev_issue_zeroout(bdev,

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Vittorio Gambaletta (VittGam) linuxbugs@vittgam.net

commit f372b81101e6895252298e563d634d5e44ae81e7 upstream.

This patch adds the correct platform data information for the Caroline Chromebook, so that the mouse button does not get stuck in pressed state after the first click.

The Samus button keymap and platform data definition are the correct ones for Caroline, so they have been reused here.

Signed-off-by: Vittorio Gambaletta linuxbugs@vittgam.net Signed-off-by: Salvatore Bellizzi lkml@seppia.net Tested-by: Guenter Roeck groeck@chromium.org Cc: stable@vger.kernel.org [dtor: adjusted vendor spelling to match shipping firmware] Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/input/touchscreen/atmel_mxt_ts.c | 9 +++++++++ 1 file changed, 9 insertions(+)

--- a/drivers/input/touchscreen/atmel_mxt_ts.c +++ b/drivers/input/touchscreen/atmel_mxt_ts.c @@ -3031,6 +3031,15 @@ static const struct dmi_system_id mxt_dm .driver_data = samus_platform_data, }, { + /* Samsung Chromebook Pro */ + .ident = "Samsung Chromebook Pro", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Google"), + DMI_MATCH(DMI_PRODUCT_NAME, "Caroline"), + }, + .driver_data = samus_platform_data, + }, + { /* Other Google Chromebooks */ .ident = "Chromebook", .matches = {

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Darrick J. Wong darrick.wong@oracle.com

commit 7d83fb14258b9961920cd86f0b921caaeb3ebe85 upstream.

During the "insert range" fallocate operation, i_size grows by the specified 'len' bytes. XFS verifies that i_size + len < s_maxbytes, as it should. But this comparison is done using the signed 'loff_t', and 'i_size + len' can wrap around to a negative value, causing the check to incorrectly pass, resulting in an inode with "negative" i_size. This is possible on 64-bit platforms, where XFS sets s_maxbytes = LLONG_MAX. ext4 and f2fs don't run into this because they set a smaller s_maxbytes.

Fix it by using subtraction instead.

Reproducer: xfs_io -f file -c "truncate $(((1<<63)-1))" -c "finsert 0 4096"

Fixes: a904b1ca5751 ("xfs: Add support FALLOC_FL_INSERT_RANGE for fallocate") Cc: stable@vger.kernel.org # v4.1+ Originally-From: Eric Biggers ebiggers@google.com Signed-off-by: Eric Biggers ebiggers@google.com Reviewed-by: Christoph Hellwig hch@lst.de Reviewed-by: Darrick J. Wong darrick.wong@oracle.com [darrick: fix signed integer addition overflow too] Signed-off-by: Darrick J. Wong darrick.wong@oracle.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- fs/xfs/xfs_file.c | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-)

--- a/fs/xfs/xfs_file.c +++ b/fs/xfs/xfs_file.c @@ -812,22 +812,26 @@ xfs_file_fallocate( if (error) goto out_unlock; } else if (mode & FALLOC_FL_INSERT_RANGE) { - unsigned int blksize_mask = i_blocksize(inode) - 1; + unsigned int blksize_mask = i_blocksize(inode) - 1; + loff_t isize = i_size_read(inode);

- new_size = i_size_read(inode) + len; if (offset & blksize_mask || len & blksize_mask) { error = -EINVAL; goto out_unlock; }

- /* check the new inode size does not wrap through zero */ - if (new_size > inode->i_sb->s_maxbytes) { + /* + * New inode size must not exceed ->s_maxbytes, accounting for + * possible signed overflow. + */ + if (inode->i_sb->s_maxbytes - isize < len) { error = -EFBIG; goto out_unlock; } + new_size = isize + len;

/* Offset should be less than i_size */ - if (offset >= i_size_read(inode)) { + if (offset >= isize) { error = -EINVAL; goto out_unlock; }

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Raju Rangoju rajur@chelsio.com

commit 26bff1bd74a4f7417509a83295614e9dab995b2a upstream.

The c4iw_rdev_close() logic was not releasing all the hw resources (PBL and RQT memory) during the device removal event (driver unload / system reboot). This can cause panic in gen_pool_destroy().

The module remove function will wait for all the hw resources to be released during the device removal event.

Fixes c12a67fe(iw_cxgb4: free EQ queue memory on last deref) Signed-off-by: Raju Rangoju rajur@chelsio.com Reviewed-by: Steve Wise swise@opengridcomputing.com Cc: stable@vger.kernel.org Signed-off-by: Doug Ledford dledford@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/infiniband/hw/cxgb4/device.c | 9 ++++++++- drivers/infiniband/hw/cxgb4/iw_cxgb4.h | 4 ++++ drivers/infiniband/hw/cxgb4/resource.c | 26 ++++++++++++++++++++++++-- 3 files changed, 36 insertions(+), 3 deletions(-)

--- a/drivers/infiniband/hw/cxgb4/device.c +++ b/drivers/infiniband/hw/cxgb4/device.c @@ -875,6 +875,11 @@ static int c4iw_rdev_open(struct c4iw_rd

rdev->status_page->db_off = 0;

+ init_completion(&rdev->rqt_compl); + init_completion(&rdev->pbl_compl); + kref_init(&rdev->rqt_kref); + kref_init(&rdev->pbl_kref); + return 0; err_free_status_page_and_wr_log: if (c4iw_wr_log && rdev->wr_log) @@ -893,13 +898,15 @@ destroy_resource:

static void c4iw_rdev_close(struct c4iw_rdev *rdev) { - destroy_workqueue(rdev->free_workq); kfree(rdev->wr_log); c4iw_release_dev_ucontext(rdev, &rdev->uctx); free_page((unsigned long)rdev->status_page); c4iw_pblpool_destroy(rdev); c4iw_rqtpool_destroy(rdev); + wait_for_completion(&rdev->pbl_compl); + wait_for_completion(&rdev->rqt_compl); c4iw_ocqp_pool_destroy(rdev); + destroy_workqueue(rdev->free_workq); c4iw_destroy_resource(&rdev->resource); }

--- a/drivers/infiniband/hw/cxgb4/iw_cxgb4.h +++ b/drivers/infiniband/hw/cxgb4/iw_cxgb4.h @@ -185,6 +185,10 @@ struct c4iw_rdev { struct wr_log_entry *wr_log; int wr_log_size; struct workqueue_struct *free_workq; + struct completion rqt_compl; + struct completion pbl_compl; + struct kref rqt_kref; + struct kref pbl_kref; };

static inline int c4iw_fatal_error(struct c4iw_rdev *rdev) --- a/drivers/infiniband/hw/cxgb4/resource.c +++ b/drivers/infiniband/hw/cxgb4/resource.c @@ -260,12 +260,22 @@ u32 c4iw_pblpool_alloc(struct c4iw_rdev rdev->stats.pbl.cur += roundup(size, 1 << MIN_PBL_SHIFT); if (rdev->stats.pbl.cur > rdev->stats.pbl.max) rdev->stats.pbl.max = rdev->stats.pbl.cur; + kref_get(&rdev->pbl_kref); } else rdev->stats.pbl.fail++; mutex_unlock(&rdev->stats.lock); return (u32)addr; }

+static void destroy_pblpool(struct kref *kref) +{ + struct c4iw_rdev *rdev; + + rdev = container_of(kref, struct c4iw_rdev, pbl_kref); + gen_pool_destroy(rdev->pbl_pool); + complete(&rdev->pbl_compl); +} + void c4iw_pblpool_free(struct c4iw_rdev *rdev, u32 addr, int size) { pr_debug("addr 0x%x size %d\n", addr, size); @@ -273,6 +283,7 @@ void c4iw_pblpool_free(struct c4iw_rdev rdev->stats.pbl.cur -= roundup(size, 1 << MIN_PBL_SHIFT); mutex_unlock(&rdev->stats.lock); gen_pool_free(rdev->pbl_pool, (unsigned long)addr, size); + kref_put(&rdev->pbl_kref, destroy_pblpool); }

int c4iw_pblpool_create(struct c4iw_rdev *rdev) @@ -310,7 +321,7 @@ int c4iw_pblpool_create(struct c4iw_rdev

void c4iw_pblpool_destroy(struct c4iw_rdev *rdev) { - gen_pool_destroy(rdev->pbl_pool); + kref_put(&rdev->pbl_kref, destroy_pblpool); }

/* @@ -331,12 +342,22 @@ u32 c4iw_rqtpool_alloc(struct c4iw_rdev rdev->stats.rqt.cur += roundup(size << 6, 1 << MIN_RQT_SHIFT); if (rdev->stats.rqt.cur > rdev->stats.rqt.max) rdev->stats.rqt.max = rdev->stats.rqt.cur; + kref_get(&rdev->rqt_kref); } else rdev->stats.rqt.fail++; mutex_unlock(&rdev->stats.lock); return (u32)addr; }

+static void destroy_rqtpool(struct kref *kref) +{ + struct c4iw_rdev *rdev; + + rdev = container_of(kref, struct c4iw_rdev, rqt_kref); + gen_pool_destroy(rdev->rqt_pool); + complete(&rdev->rqt_compl); +} + void c4iw_rqtpool_free(struct c4iw_rdev *rdev, u32 addr, int size) { pr_debug("addr 0x%x size %d\n", addr, size << 6); @@ -344,6 +365,7 @@ void c4iw_rqtpool_free(struct c4iw_rdev rdev->stats.rqt.cur -= roundup(size << 6, 1 << MIN_RQT_SHIFT); mutex_unlock(&rdev->stats.lock); gen_pool_free(rdev->rqt_pool, (unsigned long)addr, size << 6); + kref_put(&rdev->rqt_kref, destroy_rqtpool); }

int c4iw_rqtpool_create(struct c4iw_rdev *rdev) @@ -380,7 +402,7 @@ int c4iw_rqtpool_create(struct c4iw_rdev

void c4iw_rqtpool_destroy(struct c4iw_rdev *rdev) { - gen_pool_destroy(rdev->rqt_pool); + kref_put(&rdev->rqt_kref, destroy_rqtpool); }

/*

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Leon Romanovsky leonro@mellanox.com

commit b4bd701ac469075d94ed9699a28755f2862252b9 upstream.

Failure in rereg MR releases UMEM but leaves the MR to be destroyed by the user. As a result the following scenario may happen: "create MR -> rereg MR with failure -> call to rereg MR again" and hit "NULL-ptr deref or user memory access" errors.

Ensure that rereg MR is only performed on a non-dead MR.

Cc: syzkaller syzkaller@googlegroups.com Cc: stable@vger.kernel.org # 4.5 Fixes: 395a8e4c32ea ("IB/mlx5: Refactoring register MR code") Reported-by: Noa Osherovich noaos@mellanox.com Signed-off-by: Leon Romanovsky leonro@mellanox.com Signed-off-by: Doug Ledford dledford@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/infiniband/hw/mlx5/mr.c | 32 +++++++++++++++++++++++--------- 1 file changed, 23 insertions(+), 9 deletions(-)

--- a/drivers/infiniband/hw/mlx5/mr.c +++ b/drivers/infiniband/hw/mlx5/mr.c @@ -836,25 +836,28 @@ static int mr_umem_get(struct ib_pd *pd, int *order) { struct mlx5_ib_dev *dev = to_mdev(pd->device); + struct ib_umem *u; int err;

- *umem = ib_umem_get(pd->uobject->context, start, length, - access_flags, 0); - err = PTR_ERR_OR_ZERO(*umem); + *umem = NULL; + + u = ib_umem_get(pd->uobject->context, start, length, access_flags, 0); + err = PTR_ERR_OR_ZERO(u); if (err) { - *umem = NULL; - mlx5_ib_err(dev, "umem get failed (%d)\n", err); + mlx5_ib_dbg(dev, "umem get failed (%d)\n", err); return err; }

- mlx5_ib_cont_pages(*umem, start, MLX5_MKEY_PAGE_SHIFT_MASK, npages, + mlx5_ib_cont_pages(u, start, MLX5_MKEY_PAGE_SHIFT_MASK, npages, page_shift, ncont, order); if (!*npages) { mlx5_ib_warn(dev, "avoid zero region\n"); - ib_umem_release(*umem); + ib_umem_release(u); return -EINVAL; }

+ *umem = u; + mlx5_ib_dbg(dev, "npages %d, ncont %d, order %d, page_shift %d\n", *npages, *ncont, *order, *page_shift);

@@ -1343,13 +1346,12 @@ int mlx5_ib_rereg_user_mr(struct ib_mr * int access_flags = flags & IB_MR_REREG_ACCESS ? new_access_flags : mr->access_flags; - u64 addr = (flags & IB_MR_REREG_TRANS) ? virt_addr : mr->umem->address; - u64 len = (flags & IB_MR_REREG_TRANS) ? length : mr->umem->length; int page_shift = 0; int upd_flags = 0; int npages = 0; int ncont = 0; int order = 0; + u64 addr, len; int err;

mlx5_ib_dbg(dev, "start 0x%llx, virt_addr 0x%llx, length 0x%llx, access_flags 0x%x\n", @@ -1357,6 +1359,17 @@ int mlx5_ib_rereg_user_mr(struct ib_mr *

atomic_sub(mr->npages, &dev->mdev->priv.reg_pages);

+ if (!mr->umem) + return -EINVAL; + + if (flags & IB_MR_REREG_TRANS) { + addr = virt_addr; + len = length; + } else { + addr = mr->umem->address; + len = mr->umem->length; + } + if (flags != IB_MR_REREG_PD) { /* * Replace umem. This needs to be done whether or not UMR is @@ -1364,6 +1377,7 @@ int mlx5_ib_rereg_user_mr(struct ib_mr * */ flags |= IB_MR_REREG_TRANS; ib_umem_release(mr->umem); + mr->umem = NULL; err = mr_umem_get(pd, addr, len, access_flags, &mr->umem, &npages, &page_shift, &ncont, &order); if (err < 0) {

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Leon Romanovsky leonro@mellanox.com

commit 002bf2282b2d7318e444dca9ffcb994afc5d5f15 upstream.

Ensure that user didn't supply values too large that can cause overflow.

UBSAN: Undefined behaviour in drivers/infiniband/hw/mlx5/qp.c:263:23 shift exponent -2147483648 is negative CPU: 0 PID: 292 Comm: syzkaller612609 Not tainted 4.16.0-rc1+ #131 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014 Call Trace: dump_stack+0xde/0x164 ubsan_epilogue+0xe/0x81 set_rq_size+0x7c2/0xa90 create_qp_common+0xc18/0x43c0 mlx5_ib_create_qp+0x379/0x1ca0 create_qp.isra.5+0xc94/0x2260 ib_uverbs_create_qp+0x21b/0x2a0 ib_uverbs_write+0xc2c/0x1010 vfs_write+0x1b0/0x550 SyS_write+0xc7/0x1a0 do_syscall_64+0x1aa/0x740 entry_SYSCALL_64_after_hwframe+0x26/0x9b RIP: 0033:0x433569 RSP: 002b:00007ffc6e62f448 EFLAGS: 00000217 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 00000000004002f8 RCX: 0000000000433569 RDX: 0000000000000070 RSI: 00000000200042c0 RDI: 0000000000000003 RBP: 00000000006d5018 R08: 00000000004002f8 R09: 00000000004002f8 R10: 00000000004002f8 R11: 0000000000000217 R12: 0000000000000000 R13: 000000000040c9f0 R14: 000000000040ca80 R15: 0000000000000006

Cc: stable@vger.kernel.org # 3.10 Fixes: e126ba97dba9 ("mlx5: Add driver for Mellanox Connect-IB adapters") Cc: syzkaller syzkaller@googlegroups.com Reported-by: Noa Osherovich noaos@mellanox.com Signed-off-by: Leon Romanovsky leonro@mellanox.com Signed-off-by: Doug Ledford dledford@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/infiniband/hw/mlx5/qp.c | 4 ++++ 1 file changed, 4 insertions(+)

--- a/drivers/infiniband/hw/mlx5/qp.c +++ b/drivers/infiniband/hw/mlx5/qp.c @@ -256,7 +256,11 @@ static int set_rq_size(struct mlx5_ib_de } else { if (ucmd) { qp->rq.wqe_cnt = ucmd->rq_wqe_count; + if (ucmd->rq_wqe_shift > BITS_PER_BYTE * sizeof(ucmd->rq_wqe_shift)) + return -EINVAL; qp->rq.wqe_shift = ucmd->rq_wqe_shift; + if ((1 << qp->rq.wqe_shift) / sizeof(struct mlx5_wqe_data_seg) < qp->wq_sig) + return -EINVAL; qp->rq.max_gs = (1 << qp->rq.wqe_shift) / sizeof(struct mlx5_wqe_data_seg) - qp->wq_sig; qp->rq.max_post = qp->rq.wqe_cnt; } else {

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Randy Dunlap rdunlap@infradead.org

commit b3fe6c62bc66868c45b5bb16050e6bcb333af337 upstream.

Fix build errors when INFINIBAND_USER_ACCESS=m and MLX5_INFINIBAND=y. The build error occurs when the mlx5 driver code attempts to use USER_ACCESS interfaces, which are built as a loadable module.

Fixes these build errors:

drivers/infiniband/hw/mlx5/main.o: In function `populate_specs_root': ../drivers/infiniband/hw/mlx5/main.c:4982: undefined reference to `uverbs_default_get_objects' ../drivers/infiniband/hw/mlx5/main.c:4994: undefined reference to `uverbs_alloc_spec_tree' drivers/infiniband/hw/mlx5/main.o: In function `depopulate_specs_root': ../drivers/infiniband/hw/mlx5/main.c:5001: undefined reference to `uverbs_free_spec_tree'

Build-tested with multiple config combinations.

Fixes: 8c84660bb437 ("IB/mlx5: Initialize the parsing tree root without the help of uverbs") Cc: stable@vger.kernel.org # reported against 4.16 Reported-by: kbuild test robot lkp@intel.com Signed-off-by: Randy Dunlap rdunlap@infradead.org Signed-off-by: Jason Gunthorpe jgg@mellanox.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/infiniband/hw/mlx5/Kconfig | 1 + 1 file changed, 1 insertion(+)

--- a/drivers/infiniband/hw/mlx5/Kconfig +++ b/drivers/infiniband/hw/mlx5/Kconfig @@ -1,6 +1,7 @@ config MLX5_INFINIBAND tristate "Mellanox Connect-IB HCA support" depends on NETDEVICES && ETHERNET && PCI && MLX5_CORE + depends on INFINIBAND_USER_ACCESS || INFINIBAND_USER_ACCESS=n ---help--- This driver provides low-level InfiniBand support for Mellanox Connect-IB PCI Express host channel adapters (HCAs).

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mike Marciniszyn mike.marciniszyn@intel.com

commit 0a0bcb046b2f0c15b89f8c1b08ad3de601a83c66 upstream.

AHG may be armed to use the stored header, which by design is limited to edits in the PSN/A 32 bit word (bth2).

When the code is trying to send a BECN, the use of the stored header will lose the BECN bit.

Fix by avoiding AHG when getting ready to send a BECN. This is accomplished by always claiming the packet is not a middle packet which is an AHG precursor. BECNs are not a normal case and this should not hurt AHG optimizations.

Cc: stable@vger.kernel.org # 4.14.x Reviewed-by: Michael J. Ruhl michael.j.ruhl@intel.com Signed-off-by: Mike Marciniszyn mike.marciniszyn@intel.com Signed-off-by: Dennis Dalessandro dennis.dalessandro@intel.com Signed-off-by: Doug Ledford dledford@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/infiniband/hw/hfi1/ruc.c | 50 +++++++++++++++++++++++++++++++-------- 1 file changed, 40 insertions(+), 10 deletions(-)

--- a/drivers/infiniband/hw/hfi1/ruc.c +++ b/drivers/infiniband/hw/hfi1/ruc.c @@ -733,6 +733,20 @@ static inline void hfi1_make_ruc_bth(str ohdr->bth[2] = cpu_to_be32(bth2); }

+/** + * hfi1_make_ruc_header_16B - build a 16B header + * @qp: the queue pair + * @ohdr: a pointer to the destination header memory + * @bth0: bth0 passed in from the RC/UC builder + * @bth2: bth2 passed in from the RC/UC builder + * @middle: non zero implies indicates ahg "could" be used + * @ps: the current packet state + * + * This routine may disarm ahg under these situations: + * - packet needs a GRH + * - BECN needed + * - migration state not IB_MIG_MIGRATED + */ static inline void hfi1_make_ruc_header_16B(struct rvt_qp *qp, struct ib_other_headers *ohdr, u32 bth0, u32 bth2, int middle, @@ -777,6 +791,12 @@ static inline void hfi1_make_ruc_header_ else middle = 0;

+ if (qp->s_flags & RVT_S_ECN) { + qp->s_flags &= ~RVT_S_ECN; + /* we recently received a FECN, so return a BECN */ + becn = true; + middle = 0; + } if (middle) build_ahg(qp, bth2); else @@ -784,11 +804,6 @@ static inline void hfi1_make_ruc_header_

bth0 |= pkey; bth0 |= extra_bytes << 20; - if (qp->s_flags & RVT_S_ECN) { - qp->s_flags &= ~RVT_S_ECN; - /* we recently received a FECN, so return a BECN */ - becn = true; - } hfi1_make_ruc_bth(qp, ohdr, bth0, bth1, bth2);

if (!ppd->lid) @@ -806,6 +821,20 @@ static inline void hfi1_make_ruc_header_ pkey, becn, 0, l4, priv->s_sc); }

+/** + * hfi1_make_ruc_header_9B - build a 9B header + * @qp: the queue pair + * @ohdr: a pointer to the destination header memory + * @bth0: bth0 passed in from the RC/UC builder + * @bth2: bth2 passed in from the RC/UC builder + * @middle: non zero implies indicates ahg "could" be used + * @ps: the current packet state + * + * This routine may disarm ahg under these situations: + * - packet needs a GRH + * - BECN needed + * - migration state not IB_MIG_MIGRATED + */ static inline void hfi1_make_ruc_header_9B(struct rvt_qp *qp, struct ib_other_headers *ohdr, u32 bth0, u32 bth2, int middle, @@ -839,6 +868,12 @@ static inline void hfi1_make_ruc_header_ else middle = 0;

+ if (qp->s_flags & RVT_S_ECN) { + qp->s_flags &= ~RVT_S_ECN; + /* we recently received a FECN, so return a BECN */ + bth1 |= (IB_BECN_MASK << IB_BECN_SHIFT); + middle = 0; + } if (middle) build_ahg(qp, bth2); else @@ -846,11 +881,6 @@ static inline void hfi1_make_ruc_header_

bth0 |= pkey; bth0 |= extra_bytes << 20; - if (qp->s_flags & RVT_S_ECN) { - qp->s_flags &= ~RVT_S_ECN; - /* we recently received a FECN, so return a BECN */ - bth1 |= (IB_BECN_MASK << IB_BECN_SHIFT); - } hfi1_make_ruc_bth(qp, ohdr, bth0, bth1, bth2); hfi1_make_ib_hdr(&ps->s_txreq->phdr.hdr.ibh, lrh0,

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Bharat Potnuri bharat@chelsio.com

commit 2df19e19ae90d94fd8724083f161f368a2797537 upstream.

When a CQ is shared by multiple QPs, c4iw_flush_hw_cq() needs to acquire corresponding QP lock before moving the CQEs into its corresponding SW queue and accessing the SQ contents for completing a WR. Ignore CQEs if corresponding QP is already flushed.

Cc: stable@vger.kernel.org Signed-off-by: Potnuri Bharat Teja bharat@chelsio.com Reviewed-by: Steve Wise swise@opengridcomputing.com Signed-off-by: Doug Ledford dledford@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/infiniband/hw/cxgb4/cq.c | 11 ++++++++++- drivers/infiniband/hw/cxgb4/iw_cxgb4.h | 2 +- drivers/infiniband/hw/cxgb4/qp.c | 4 ++-- 3 files changed, 13 insertions(+), 4 deletions(-)

--- a/drivers/infiniband/hw/cxgb4/cq.c +++ b/drivers/infiniband/hw/cxgb4/cq.c @@ -315,7 +315,7 @@ static void advance_oldest_read(struct t * Deal with out-of-order and/or completions that complete * prior unsignalled WRs. */ -void c4iw_flush_hw_cq(struct c4iw_cq *chp) +void c4iw_flush_hw_cq(struct c4iw_cq *chp, struct c4iw_qp *flush_qhp) { struct t4_cqe *hw_cqe, *swcqe, read_cqe; struct c4iw_qp *qhp; @@ -339,6 +339,13 @@ void c4iw_flush_hw_cq(struct c4iw_cq *ch if (qhp == NULL) goto next_cqe;

+ if (flush_qhp != qhp) { + spin_lock(&qhp->lock); + + if (qhp->wq.flushed == 1) + goto next_cqe; + } + if (CQE_OPCODE(hw_cqe) == FW_RI_TERMINATE) goto next_cqe;

@@ -390,6 +397,8 @@ void c4iw_flush_hw_cq(struct c4iw_cq *ch next_cqe: t4_hwcq_consume(&chp->cq); ret = t4_next_hw_cqe(&chp->cq, &hw_cqe); + if (qhp && flush_qhp != qhp) + spin_unlock(&qhp->lock); } }

--- a/drivers/infiniband/hw/cxgb4/iw_cxgb4.h +++ b/drivers/infiniband/hw/cxgb4/iw_cxgb4.h @@ -1053,7 +1053,7 @@ u32 c4iw_pblpool_alloc(struct c4iw_rdev void c4iw_pblpool_free(struct c4iw_rdev *rdev, u32 addr, int size); u32 c4iw_ocqp_pool_alloc(struct c4iw_rdev *rdev, int size); void c4iw_ocqp_pool_free(struct c4iw_rdev *rdev, u32 addr, int size); -void c4iw_flush_hw_cq(struct c4iw_cq *chp); +void c4iw_flush_hw_cq(struct c4iw_cq *chp, struct c4iw_qp *flush_qhp); void c4iw_count_rcqes(struct t4_cq *cq, struct t4_wq *wq, int *count); int c4iw_ep_disconnect(struct c4iw_ep *ep, int abrupt, gfp_t gfp); int c4iw_flush_rq(struct t4_wq *wq, struct t4_cq *cq, int count); --- a/drivers/infiniband/hw/cxgb4/qp.c +++ b/drivers/infiniband/hw/cxgb4/qp.c @@ -1343,12 +1343,12 @@ static void __flush_qp(struct c4iw_qp *q qhp->wq.flushed = 1; t4_set_wq_in_error(&qhp->wq);

- c4iw_flush_hw_cq(rchp); + c4iw_flush_hw_cq(rchp, qhp); c4iw_count_rcqes(&rchp->cq, &qhp->wq, &count); rq_flushed = c4iw_flush_rq(&qhp->wq, &rchp->cq, count);

if (schp != rchp) - c4iw_flush_hw_cq(schp); + c4iw_flush_hw_cq(schp, qhp); sq_flushed = c4iw_flush_sq(qhp);

spin_unlock(&qhp->lock);

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Boris Brezillon boris.brezillon@bootlin.com

commit f7aef1c207092770d06d0df21dceafdca2b49c39 upstream.

Commit b9f19259b84d ("drm/vc4: Add the DRM_IOCTL_VC4_GEM_MADVISE ioctl") introduced a mechanism to mark some BOs as purgeable to allow the driver to drop them under memory pressure. In order to implement this feature we had to add a mechanism to mark BOs as currently used by a piece of hardware which materialized through the ->usecnt counter.

Plane code is supposed to increment usecnt when it attaches a BO to a plane and decrement it when it's done with this BO, which was done in the ->prepare_fb() and ->cleanup_fb() hooks. The problem is, async page flip logic does not go through the regular atomic update path, and ->prepare_fb() and ->cleanup_fb() are not called in this case.

Fix that by manually calling vc4_bo_{inc,dec}_usecnt() in the async-page-flip path.

Note that all this should go away as soon as we get generic async page flip support in the core, in the meantime, this fix should do the trick.

Fixes: b9f19259b84d ("drm/vc4: Add the DRM_IOCTL_VC4_GEM_MADVISE ioctl") Reported-by: Peter Robinson pbrobinson@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Boris Brezillon boris.brezillon@bootlin.com Signed-off-by: Eric Anholt eric@anholt.net Link: https://patchwork.freedesktop.org/patch/msgid/20180430133232.32457-1-boris.b... Link: https://patchwork.freedesktop.org/patch/msgid/20180430133232.32457-1-boris.b... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/gpu/drm/vc4/vc4_crtc.c | 46 ++++++++++++++++++++++++++++++++++++++++- 1 file changed, 45 insertions(+), 1 deletion(-)

--- a/drivers/gpu/drm/vc4/vc4_crtc.c +++ b/drivers/gpu/drm/vc4/vc4_crtc.c @@ -735,6 +735,7 @@ static irqreturn_t vc4_crtc_irq_handler( struct vc4_async_flip_state { struct drm_crtc *crtc; struct drm_framebuffer *fb; + struct drm_framebuffer *old_fb; struct drm_pending_vblank_event *event;

struct vc4_seqno_cb cb; @@ -764,6 +765,23 @@ vc4_async_page_flip_complete(struct vc4_

drm_crtc_vblank_put(crtc); drm_framebuffer_put(flip_state->fb); + + /* Decrement the BO usecnt in order to keep the inc/dec calls balanced + * when the planes are updated through the async update path. + * FIXME: we should move to generic async-page-flip when it's + * available, so that we can get rid of this hand-made cleanup_fb() + * logic. + */ + if (flip_state->old_fb) { + struct drm_gem_cma_object *cma_bo; + struct vc4_bo *bo; + + cma_bo = drm_fb_cma_get_gem_obj(flip_state->old_fb, 0); + bo = to_vc4_bo(&cma_bo->base); + vc4_bo_dec_usecnt(bo); + drm_framebuffer_put(flip_state->old_fb); + } + kfree(flip_state);

up(&vc4->async_modeset); @@ -788,9 +806,22 @@ static int vc4_async_page_flip(struct dr struct drm_gem_cma_object *cma_bo = drm_fb_cma_get_gem_obj(fb, 0); struct vc4_bo *bo = to_vc4_bo(&cma_bo->base);

+ /* Increment the BO usecnt here, so that we never end up with an + * unbalanced number of vc4_bo_{dec,inc}_usecnt() calls when the + * plane is later updated through the non-async path. + * FIXME: we should move to generic async-page-flip when it's + * available, so that we can get rid of this hand-made prepare_fb() + * logic. + */ + ret = vc4_bo_inc_usecnt(bo); + if (ret) + return ret; + flip_state = kzalloc(sizeof(*flip_state), GFP_KERNEL); - if (!flip_state) + if (!flip_state) { + vc4_bo_dec_usecnt(bo); return -ENOMEM; + }

drm_framebuffer_get(fb); flip_state->fb = fb; @@ -801,10 +832,23 @@ static int vc4_async_page_flip(struct dr ret = down_interruptible(&vc4->async_modeset); if (ret) { drm_framebuffer_put(fb); + vc4_bo_dec_usecnt(bo); kfree(flip_state); return ret; }

+ /* Save the current FB before it's replaced by the new one in + * drm_atomic_set_fb_for_plane(). We'll need the old FB in + * vc4_async_page_flip_complete() to decrement the BO usecnt and keep + * it consistent. + * FIXME: we should move to generic async-page-flip when it's + * available, so that we can get rid of this hand-made cleanup_fb() + * logic. + */ + flip_state->old_fb = plane->state->fb; + if (flip_state->old_fb) + drm_framebuffer_get(flip_state->old_fb); + WARN_ON(drm_crtc_vblank_get(crtc) != 0);

/* Immediately update the plane's legacy fb pointer, so that later

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Sean Paul seanpaul@chromium.org

commit 49ceda9de2da4d1827941d06701f3017c27c1855 upstream.

edid should be freed once it's finished being used.

Fixes: 56fe8b6f4991 ("drm/bridge: Add RGB to VGA bridge support") Cc: Rob Herring robh@kernel.org Cc: Sean Paul seanpaul@chromium.org Cc: Maxime Ripard maxime.ripard@free-electrons.com Cc: Archit Taneja architt@codeaurora.org Cc: Andrzej Hajda a.hajda@samsung.com Cc: Laurent Pinchart Laurent.pinchart@ideasonboard.com Cc: stable@vger.kernel.org # v4.9+ Reviewed-by: Maxime Ripard maxime.ripard@bootlin.com Reviewed-by: Laurent Pinchart laurent.pinchart@ideasonboard.com Signed-off-by: Sean Paul seanpaul@chromium.org Link: https://patchwork.freedesktop.org/patch/msgid/20180420190007.1572-1-seanpaul... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/gpu/drm/bridge/dumb-vga-dac.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/gpu/drm/bridge/dumb-vga-dac.c +++ b/drivers/gpu/drm/bridge/dumb-vga-dac.c @@ -55,7 +55,9 @@ static int dumb_vga_get_modes(struct drm }

drm_mode_connector_update_edid_property(connector, edid); - return drm_add_edid_modes(connector, edid); + ret = drm_add_edid_modes(connector, edid); + kfree(edid); + return ret;

fallback: /*

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mathias Nyman mathias.nyman@linux.intel.com

commit 44a182b9d17765514fa2b1cc911e4e65134eef93 upstream.

KASAN found a use-after-free in xhci_free_virt_device+0x33b/0x38e where xhci_free_virt_device() sets slot id to 0 if udev exists: if (dev->udev && dev->udev->slot_id) dev->udev->slot_id = 0;

dev->udev will be true even if udev is freed because dev->udev is not set to NULL.

set dev->udev pointer to NULL in xhci_free_dev()

The original patch went to stable so this fix needs to be applied there as well.

Fixes: a400efe455f7 ("xhci: zero usb device slot_id member when disabling and freeing a xhci slot") Cc: stable@vger.kernel.org Reported-by: Guenter Roeck linux@roeck-us.net Reviewed-by: Guenter Roeck linux@roeck-us.net Tested-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Mathias Nyman mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/usb/host/xhci.c | 1 + 1 file changed, 1 insertion(+)

--- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -3548,6 +3548,7 @@ static void xhci_free_dev(struct usb_hcd del_timer_sync(&virt_dev->eps[i].stop_cmd_timer); } xhci_debugfs_remove_slot(xhci, udev->slot_id); + virt_dev->udev = NULL; ret = xhci_disable_slot(xhci, udev->slot_id); if (ret) xhci_free_virt_device(xhci, udev->slot_id);

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mayank Rana mrana@codeaurora.org

commit 96bd39df29c29d348d65311e5954c0b7d3a2a790 upstream.

dwc3_ep_dequeue() waits for completion of End Transfer command using wait_event_lock_irq(), which will release the dwc3->lock while waiting and reacquire after completion. This allows a potential race condition with ep_disable() which also removes all requests from started_list and pending_list.

The check for NULL r->trb should catch this but currently it exits to the wrong 'out1' label which calls dwc3_gadget_giveback(). Since its list entry was already removed, if CONFIG_DEBUG_LIST is enabled a 'list_del corruption' bug is thrown since its next/prev pointers are already LIST_POISON1/2. If r->trb is NULL it should simply exit to 'out0'.

Fixes: cf3113d893d4 ("usb: dwc3: gadget: properly increment dequeue pointer on ep_dequeue") Cc: stable@vger.kernel.org # v4.12+ Signed-off-by: Mayank Rana mrana@codeaurora.org Signed-off-by: Jack Pham jackp@codeaurora.org Signed-off-by: Felipe Balbi felipe.balbi@linux.intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/usb/dwc3/gadget.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1424,7 +1424,7 @@ static int dwc3_gadget_ep_dequeue(struct dwc->lock);

if (!r->trb) - goto out1; + goto out0;

if (r->num_pending_sgs) { struct dwc3_trb *trb;

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Johan Hovold johan@kernel.org

commit c3a65808f04a8426481b63a4fbd9392f009f6330 upstream.

Reimplement interface masking using device flags stored directly in the device-id table. This will make it easier to add and maintain device-id entries by using a more compact and readable notation compared to the current implementation (which manages pairs of masks in separate blacklist structs).

Two convenience macros are used to flag an interface as either reserved or as not supporting modem-control requests:

{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM), .driver_info = NCTRL(0) | RSVD(3) },

For now, we limit the highest maskable interface number to seven, which allows for (up to 16) additional device flags to be added later should need arise.

Note that this will likely need to be backported to stable in order to make future device-id backports more manageable.

Reviewed-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Johan Hovold johan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/usb/serial/option.c | 446 ++++++++++++++------------------------------ 1 file changed, 152 insertions(+), 294 deletions(-)

--- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -548,151 +548,15 @@ static void option_instat_callback(struc #define WETELECOM_PRODUCT_6802 0x6802 #define WETELECOM_PRODUCT_WMD300 0x6803

-struct option_blacklist_info { - /* bitmask of interface numbers blacklisted for send_setup */ - const unsigned long sendsetup; - /* bitmask of interface numbers that are reserved */ - const unsigned long reserved; -}; - -static const struct option_blacklist_info four_g_w14_blacklist = { - .sendsetup = BIT(0) | BIT(1), -}; - -static const struct option_blacklist_info four_g_w100_blacklist = { - .sendsetup = BIT(1) | BIT(2), - .reserved = BIT(3), -}; - -static const struct option_blacklist_info alcatel_x200_blacklist = { - .sendsetup = BIT(0) | BIT(1), - .reserved = BIT(4), -}; - -static const struct option_blacklist_info zte_0037_blacklist = { - .sendsetup = BIT(0) | BIT(1), -}; - -static const struct option_blacklist_info zte_k3765_z_blacklist = { - .sendsetup = BIT(0) | BIT(1) | BIT(2), - .reserved = BIT(4), -}; - -static const struct option_blacklist_info zte_ad3812_z_blacklist = { - .sendsetup = BIT(0) | BIT(1) | BIT(2), -}; - -static const struct option_blacklist_info zte_mc2718_z_blacklist = { - .sendsetup = BIT(1) | BIT(2) | BIT(3) | BIT(4), -}; - -static const struct option_blacklist_info zte_mc2716_z_blacklist = { - .sendsetup = BIT(1) | BIT(2) | BIT(3), -}; - -static const struct option_blacklist_info zte_me3620_mbim_blacklist = { - .reserved = BIT(2) | BIT(3) | BIT(4), -}; - -static const struct option_blacklist_info zte_me3620_xl_blacklist = { - .reserved = BIT(3) | BIT(4) | BIT(5), -}; - -static const struct option_blacklist_info zte_zm8620_x_blacklist = { - .reserved = BIT(3) | BIT(4) | BIT(5), -}; - -static const struct option_blacklist_info huawei_cdc12_blacklist = { - .reserved = BIT(1) | BIT(2), -}; - -static const struct option_blacklist_info net_intf0_blacklist = { - .reserved = BIT(0), -}; - -static const struct option_blacklist_info net_intf1_blacklist = { - .reserved = BIT(1), -}; - -static const struct option_blacklist_info net_intf2_blacklist = { - .reserved = BIT(2), -}; - -static const struct option_blacklist_info net_intf3_blacklist = { - .reserved = BIT(3), -}; - -static const struct option_blacklist_info net_intf4_blacklist = { - .reserved = BIT(4), -}; - -static const struct option_blacklist_info net_intf5_blacklist = { - .reserved = BIT(5), -}; - -static const struct option_blacklist_info net_intf6_blacklist = { - .reserved = BIT(6), -}; - -static const struct option_blacklist_info zte_mf626_blacklist = { - .sendsetup = BIT(0) | BIT(1), - .reserved = BIT(4), -}; - -static const struct option_blacklist_info zte_1255_blacklist = { - .reserved = BIT(3) | BIT(4), -}; - -static const struct option_blacklist_info simcom_sim7100e_blacklist = { - .reserved = BIT(5) | BIT(6), -}; - -static const struct option_blacklist_info telit_me910_blacklist = { - .sendsetup = BIT(0), - .reserved = BIT(1) | BIT(3), -}; - -static const struct option_blacklist_info telit_me910_dual_modem_blacklist = { - .sendsetup = BIT(0), - .reserved = BIT(3), -}; - -static const struct option_blacklist_info telit_le910_blacklist = { - .sendsetup = BIT(0), - .reserved = BIT(1) | BIT(2), -}; - -static const struct option_blacklist_info telit_le920_blacklist = { - .sendsetup = BIT(0), - .reserved = BIT(1) | BIT(5), -}; - -static const struct option_blacklist_info telit_le920a4_blacklist_1 = { - .sendsetup = BIT(0), - .reserved = BIT(1), -}; - -static const struct option_blacklist_info telit_le922_blacklist_usbcfg0 = { - .sendsetup = BIT(2), - .reserved = BIT(0) | BIT(1) | BIT(3), -};

-static const struct option_blacklist_info telit_le922_blacklist_usbcfg3 = { - .sendsetup = BIT(0), - .reserved = BIT(1) | BIT(2) | BIT(3), -}; +/* Device flags */

-static const struct option_blacklist_info cinterion_rmnet2_blacklist = { - .reserved = BIT(4) | BIT(5), -}; +/* Interface does not support modem-control requests */ +#define NCTRL(ifnum) ((BIT(ifnum) & 0xff) << 8)

-static const struct option_blacklist_info yuga_clm920_nc5_blacklist = { - .reserved = BIT(1) | BIT(4), -}; +/* Interface is reserved */ +#define RSVD(ifnum) ((BIT(ifnum) & 0xff) << 0)

-static const struct option_blacklist_info quectel_ep06_blacklist = { - .reserved = BIT(4) | BIT(5), -};

static const struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) }, @@ -726,26 +590,26 @@ static const struct usb_device_id option { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GKE) }, { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLE) }, { USB_DEVICE(QUANTA_VENDOR_ID, 0xea42), - .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + .driver_info = RSVD(4) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1c05, USB_CLASS_COMM, 0x02, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1c1f, USB_CLASS_COMM, 0x02, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1c23, USB_CLASS_COMM, 0x02, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E173, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t) &net_intf1_blacklist }, + .driver_info = RSVD(1) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E173S6, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t) &net_intf1_blacklist }, + .driver_info = RSVD(1) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1750, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t) &net_intf2_blacklist }, + .driver_info = RSVD(2) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1441, USB_CLASS_COMM, 0x02, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x1442, USB_CLASS_COMM, 0x02, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4505, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist }, + .driver_info = RSVD(1) | RSVD(2) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist }, + .driver_info = RSVD(1) | RSVD(2) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0x14ac, 0xff, 0xff, 0xff), /* Huawei E1820 */ - .driver_info = (kernel_ulong_t) &net_intf1_blacklist }, + .driver_info = RSVD(1) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4605, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist }, + .driver_info = RSVD(1) | RSVD(2) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0xff, 0xff) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x01) }, { USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, 0xff, 0x01, 0x02) }, @@ -1190,67 +1054,67 @@ static const struct usb_device_id option { USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) }, { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6000)}, /* ZTE AC8700 */ { USB_DEVICE_AND_INTERFACE_INFO(QUALCOMM_VENDOR_ID, 0x6001, 0xff, 0xff, 0xff), /* 4G LTE usb-modem U901 */ - .driver_info = (kernel_ulong_t)&net_intf3_blacklist }, + .driver_info = RSVD(3) }, { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */ { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x0023)}, /* ONYX 3G device */ { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x9000)}, /* SIMCom SIM5218 */ /* Quectel products using Qualcomm vendor ID */ { USB_DEVICE(QUALCOMM_VENDOR_ID, QUECTEL_PRODUCT_UC15)}, { USB_DEVICE(QUALCOMM_VENDOR_ID, QUECTEL_PRODUCT_UC20), - .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + .driver_info = RSVD(4) }, /* Yuga products use Qualcomm vendor ID */ { USB_DEVICE(QUALCOMM_VENDOR_ID, YUGA_PRODUCT_CLM920_NC5), - .driver_info = (kernel_ulong_t)&yuga_clm920_nc5_blacklist }, + .driver_info = RSVD(1) | RSVD(4) }, /* Quectel products using Quectel vendor ID */ { USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC21), - .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + .driver_info = RSVD(4) }, { USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EC25), - .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + .driver_info = RSVD(4) }, { USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_BG96), - .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + .driver_info = RSVD(4) }, { USB_DEVICE(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EP06), - .driver_info = (kernel_ulong_t)&quectel_ep06_blacklist }, + .driver_info = RSVD(4) | RSVD(5) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6001) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_300) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6003), - .driver_info = (kernel_ulong_t)&net_intf0_blacklist }, + .driver_info = RSVD(0) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6004) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_6005) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CGU_628A) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHE_628S), - .driver_info = (kernel_ulong_t)&net_intf0_blacklist }, + .driver_info = RSVD(0) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CMU_301), - .driver_info = (kernel_ulong_t)&net_intf0_blacklist }, + .driver_info = RSVD(0) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_628), - .driver_info = (kernel_ulong_t)&net_intf0_blacklist }, + .driver_info = RSVD(0) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_628S) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CDU_680) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CDU_685A) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_720S), - .driver_info = (kernel_ulong_t)&net_intf0_blacklist }, + .driver_info = RSVD(0) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7002), - .driver_info = (kernel_ulong_t)&net_intf0_blacklist }, + .driver_info = RSVD(0) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_629K), - .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + .driver_info = RSVD(4) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7004), - .driver_info = (kernel_ulong_t)&net_intf3_blacklist }, + .driver_info = RSVD(3) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7005) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CGU_629), - .driver_info = (kernel_ulong_t)&net_intf5_blacklist }, + .driver_info = RSVD(5) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_629S), - .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + .driver_info = RSVD(4) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_CHU_720I), - .driver_info = (kernel_ulong_t)&net_intf0_blacklist }, + .driver_info = RSVD(0) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7212), - .driver_info = (kernel_ulong_t)&net_intf0_blacklist }, + .driver_info = RSVD(0) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7213), - .driver_info = (kernel_ulong_t)&net_intf0_blacklist }, + .driver_info = RSVD(0) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7251), - .driver_info = (kernel_ulong_t)&net_intf1_blacklist }, + .driver_info = RSVD(1) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7252), - .driver_info = (kernel_ulong_t)&net_intf1_blacklist }, + .driver_info = RSVD(1) }, { USB_DEVICE(CMOTECH_VENDOR_ID, CMOTECH_PRODUCT_7253), - .driver_info = (kernel_ulong_t)&net_intf1_blacklist }, + .driver_info = RSVD(1) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864G) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_CC864_DUAL) }, @@ -1258,38 +1122,38 @@ static const struct usb_device_id option { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_DE910_DUAL) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UE910_V2) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG0), - .driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg0 }, + .driver_info = RSVD(0) | RSVD(1) | NCTRL(2) | RSVD(3) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG1), - .driver_info = (kernel_ulong_t)&telit_le910_blacklist }, + .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG2), - .driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 }, + .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) | RSVD(3) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG3), - .driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 }, + .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) | RSVD(3) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG5, 0xff), - .driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg0 }, + .driver_info = RSVD(0) | RSVD(1) | NCTRL(2) | RSVD(3) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910), - .driver_info = (kernel_ulong_t)&telit_me910_blacklist }, + .driver_info = NCTRL(0) | RSVD(1) | RSVD(3) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910_DUAL_MODEM), - .driver_info = (kernel_ulong_t)&telit_me910_dual_modem_blacklist }, + .driver_info = NCTRL(0) | RSVD(3) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910), - .driver_info = (kernel_ulong_t)&telit_le910_blacklist }, + .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910_USBCFG4), - .driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 }, + .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) | RSVD(3) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920), - .driver_info = (kernel_ulong_t)&telit_le920_blacklist }, + .driver_info = NCTRL(0) | RSVD(1) | RSVD(5) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1207) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1208), - .driver_info = (kernel_ulong_t)&telit_le920a4_blacklist_1 }, + .driver_info = NCTRL(0) | RSVD(1) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1211), - .driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 }, + .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) | RSVD(3) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1212), - .driver_info = (kernel_ulong_t)&telit_le920a4_blacklist_1 }, + .driver_info = NCTRL(0) | RSVD(1) }, { USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1213, 0xff) }, { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920A4_1214), - .driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 }, + .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) | RSVD(3) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */ { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&net_intf1_blacklist }, + .driver_info = RSVD(1) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0003, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0004, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0005, 0xff, 0xff, 0xff) }, @@ -1305,58 +1169,58 @@ static const struct usb_device_id option { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0010, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0011, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0012, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&net_intf1_blacklist }, + .driver_info = RSVD(1) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0013, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0016, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0017, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&net_intf3_blacklist }, + .driver_info = RSVD(3) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0018, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0019, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&net_intf3_blacklist }, + .driver_info = RSVD(3) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0020, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0021, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + .driver_info = RSVD(4) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0022, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0023, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0024, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0025, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&net_intf1_blacklist }, + .driver_info = RSVD(1) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0028, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0029, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0030, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF626, 0xff, - 0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_mf626_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF626, 0xff, 0xff, 0xff), + .driver_info = NCTRL(0) | NCTRL(1) | RSVD(4) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0032, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0033, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0034, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0037, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&zte_0037_blacklist }, + .driver_info = NCTRL(0) | NCTRL(1) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0038, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0039, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0040, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0042, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + .driver_info = RSVD(4) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0043, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0044, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0048, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0049, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&net_intf5_blacklist }, + .driver_info = RSVD(5) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0050, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0051, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0052, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + .driver_info = RSVD(4) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0054, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0055, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&net_intf1_blacklist }, + .driver_info = RSVD(1) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0056, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0057, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0058, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + .driver_info = RSVD(4) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0061, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0062, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0063, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + .driver_info = RSVD(4) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0064, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0065, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0066, 0xff, 0xff, 0xff) }, @@ -1381,26 +1245,26 @@ static const struct usb_device_id option { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0096, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0097, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0104, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + .driver_info = RSVD(4) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0105, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0106, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0108, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0113, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&net_intf5_blacklist }, + .driver_info = RSVD(5) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0117, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0118, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&net_intf5_blacklist }, + .driver_info = RSVD(5) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0121, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&net_intf5_blacklist }, + .driver_info = RSVD(5) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0122, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0123, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + .driver_info = RSVD(4) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0124, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&net_intf5_blacklist }, + .driver_info = RSVD(5) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0125, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&net_intf6_blacklist }, + .driver_info = RSVD(6) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0126, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&net_intf5_blacklist }, + .driver_info = RSVD(5) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0128, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0135, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0136, 0xff, 0xff, 0xff) }, @@ -1416,50 +1280,50 @@ static const struct usb_device_id option { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0155, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0156, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0157, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&net_intf5_blacklist }, + .driver_info = RSVD(5) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0158, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&net_intf3_blacklist }, + .driver_info = RSVD(3) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0159, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0161, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0162, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0164, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0165, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0167, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + .driver_info = RSVD(4) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0189, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0191, 0xff, 0xff, 0xff), /* ZTE EuFi890 */ - .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + .driver_info = RSVD(4) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0196, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0197, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0199, 0xff, 0xff, 0xff), /* ZTE MF820S */ - .driver_info = (kernel_ulong_t)&net_intf1_blacklist }, + .driver_info = RSVD(1) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0200, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0201, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0254, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0257, 0xff, 0xff, 0xff), /* ZTE MF821 */ - .driver_info = (kernel_ulong_t)&net_intf3_blacklist }, + .driver_info = RSVD(3) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0265, 0xff, 0xff, 0xff), /* ONDA MT8205 */ - .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + .driver_info = RSVD(4) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0284, 0xff, 0xff, 0xff), /* ZTE MF880 */ - .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + .driver_info = RSVD(4) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0317, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0326, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + .driver_info = RSVD(4) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0330, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0395, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0412, 0xff, 0xff, 0xff), /* Telewell TW-LTE 4G */ - .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + .driver_info = RSVD(4) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0414, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0417, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1008, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + .driver_info = RSVD(4) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + .driver_info = RSVD(4) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + .driver_info = RSVD(4) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1018, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1021, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&net_intf2_blacklist }, + .driver_info = RSVD(2) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1057, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1058, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1059, 0xff, 0xff, 0xff) }, @@ -1576,23 +1440,23 @@ static const struct usb_device_id option { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1170, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1244, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1245, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + .driver_info = RSVD(4) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1246, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1247, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + .driver_info = RSVD(4) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1248, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1249, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1250, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1251, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1252, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + .driver_info = RSVD(4) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1253, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1254, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + .driver_info = RSVD(4) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1255, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&zte_1255_blacklist }, + .driver_info = RSVD(3) | RSVD(4) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1256, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + .driver_info = RSVD(4) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1257, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1258, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1259, 0xff, 0xff, 0xff) }, @@ -1607,7 +1471,7 @@ static const struct usb_device_id option { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1268, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1269, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1270, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&net_intf5_blacklist }, + .driver_info = RSVD(5) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1271, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1272, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1273, 0xff, 0xff, 0xff) }, @@ -1643,17 +1507,17 @@ static const struct usb_device_id option { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1303, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1333, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1401, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&net_intf2_blacklist }, + .driver_info = RSVD(2) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1402, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&net_intf2_blacklist }, + .driver_info = RSVD(2) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1424, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&net_intf2_blacklist }, + .driver_info = RSVD(2) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1425, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&net_intf2_blacklist }, + .driver_info = RSVD(2) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1426, 0xff, 0xff, 0xff), /* ZTE MF91 */ - .driver_info = (kernel_ulong_t)&net_intf2_blacklist }, + .driver_info = RSVD(2) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1428, 0xff, 0xff, 0xff), /* Telewell TW-LTE 4G v2 */ - .driver_info = (kernel_ulong_t)&net_intf2_blacklist }, + .driver_info = RSVD(2) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1533, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1534, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1535, 0xff, 0xff, 0xff) }, @@ -1671,8 +1535,8 @@ static const struct usb_device_id option { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1596, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1598, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1600, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff, - 0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_k3765_z_blacklist }, + { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff, 0xff, 0xff), + .driver_info = NCTRL(0) | NCTRL(1) | NCTRL(2) | RSVD(4) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) },

{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0014, 0xff, 0xff, 0xff) }, /* ZTE CDMA products */ @@ -1683,20 +1547,20 @@ static const struct usb_device_id option { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0073, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0094, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0130, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&net_intf1_blacklist }, + .driver_info = RSVD(1) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0133, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&net_intf3_blacklist }, + .driver_info = RSVD(3) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0141, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&net_intf5_blacklist }, + .driver_info = RSVD(5) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0147, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0152, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0168, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + .driver_info = RSVD(4) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0170, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0176, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&net_intf3_blacklist }, + .driver_info = RSVD(3) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0178, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&net_intf3_blacklist }, + .driver_info = RSVD(3) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff42, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff43, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff44, 0xff, 0xff, 0xff) }, @@ -1848,19 +1712,19 @@ static const struct usb_device_id option { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710T, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2718, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&zte_mc2718_z_blacklist }, + .driver_info = NCTRL(1) | NCTRL(2) | NCTRL(3) | NCTRL(4) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AD3812, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&zte_ad3812_z_blacklist }, + .driver_info = NCTRL(0) | NCTRL(1) | NCTRL(2) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2716, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&zte_mc2716_z_blacklist }, + .driver_info = NCTRL(1) | NCTRL(2) | NCTRL(3) }, { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_ME3620_L), - .driver_info = (kernel_ulong_t)&zte_me3620_xl_blacklist }, + .driver_info = RSVD(3) | RSVD(4) | RSVD(5) }, { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_ME3620_MBIM), - .driver_info = (kernel_ulong_t)&zte_me3620_mbim_blacklist }, + .driver_info = RSVD(2) | RSVD(3) | RSVD(4) }, { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_ME3620_X), - .driver_info = (kernel_ulong_t)&zte_me3620_xl_blacklist }, + .driver_info = RSVD(3) | RSVD(4) | RSVD(5) }, { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_ZM8620_X), - .driver_info = (kernel_ulong_t)&zte_zm8620_x_blacklist }, + .driver_info = RSVD(3) | RSVD(4) | RSVD(5) }, { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x01) }, { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x05) }, { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x86, 0x10) }, @@ -1880,37 +1744,34 @@ static const struct usb_device_id option { USB_DEVICE(ALINK_VENDOR_ID, ALINK_PRODUCT_PH300) }, { USB_DEVICE_AND_INTERFACE_INFO(ALINK_VENDOR_ID, ALINK_PRODUCT_3GU, 0xff, 0xff, 0xff) }, { USB_DEVICE(ALINK_VENDOR_ID, SIMCOM_PRODUCT_SIM7100E), - .driver_info = (kernel_ulong_t)&simcom_sim7100e_blacklist }, + .driver_info = RSVD(5) | RSVD(6) }, { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S_X200), - .driver_info = (kernel_ulong_t)&alcatel_x200_blacklist - }, + .driver_info = NCTRL(0) | NCTRL(1) | RSVD(4) }, { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X220_X500D), - .driver_info = (kernel_ulong_t)&net_intf6_blacklist }, + .driver_info = RSVD(6) }, { USB_DEVICE(ALCATEL_VENDOR_ID, 0x0052), - .driver_info = (kernel_ulong_t)&net_intf6_blacklist }, + .driver_info = RSVD(6) }, { USB_DEVICE(ALCATEL_VENDOR_ID, 0x00b6), - .driver_info = (kernel_ulong_t)&net_intf3_blacklist }, + .driver_info = RSVD(3) }, { USB_DEVICE(ALCATEL_VENDOR_ID, 0x00b7), - .driver_info = (kernel_ulong_t)&net_intf5_blacklist }, + .driver_info = RSVD(5) }, { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_L100V), - .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + .driver_info = RSVD(4) }, { USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_L800MA), - .driver_info = (kernel_ulong_t)&net_intf2_blacklist }, + .driver_info = RSVD(2) }, { USB_DEVICE(AIRPLUS_VENDOR_ID, AIRPLUS_PRODUCT_MCD650) }, { USB_DEVICE(TLAYTECH_VENDOR_ID, TLAYTECH_PRODUCT_TEU800) }, { USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W14), - .driver_info = (kernel_ulong_t)&four_g_w14_blacklist - }, + .driver_info = NCTRL(0) | NCTRL(1) }, { USB_DEVICE(LONGCHEER_VENDOR_ID, FOUR_G_SYSTEMS_PRODUCT_W100), - .driver_info = (kernel_ulong_t)&four_g_w100_blacklist - }, + .driver_info = NCTRL(1) | NCTRL(2) | RSVD(3) }, {USB_DEVICE(LONGCHEER_VENDOR_ID, FUJISOFT_PRODUCT_FS040U), - .driver_info = (kernel_ulong_t)&net_intf3_blacklist}, + .driver_info = RSVD(3)}, { USB_DEVICE_INTERFACE_CLASS(LONGCHEER_VENDOR_ID, SPEEDUP_PRODUCT_SU9800, 0xff) }, { USB_DEVICE_INTERFACE_CLASS(LONGCHEER_VENDOR_ID, 0x9801, 0xff), - .driver_info = (kernel_ulong_t)&net_intf3_blacklist }, + .driver_info = RSVD(3) }, { USB_DEVICE_INTERFACE_CLASS(LONGCHEER_VENDOR_ID, 0x9803, 0xff), - .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + .driver_info = RSVD(4) }, { USB_DEVICE(LONGCHEER_VENDOR_ID, ZOOM_PRODUCT_4597) }, { USB_DEVICE(LONGCHEER_VENDOR_ID, IBALL_3_5G_CONNECT) }, { USB_DEVICE(HAIER_VENDOR_ID, HAIER_PRODUCT_CE100) }, @@ -1936,14 +1797,14 @@ static const struct usb_device_id option { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_E) }, { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_EU3_P) }, { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8), - .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + .driver_info = RSVD(4) }, { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX, 0xff) }, { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PLXX), - .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + .driver_info = RSVD(4) }, { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8_2RMNET, 0xff), - .driver_info = (kernel_ulong_t)&cinterion_rmnet2_blacklist }, + .driver_info = RSVD(4) | RSVD(5) }, { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_PH8_AUDIO, 0xff), - .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + .driver_info = RSVD(4) }, { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX_2RMNET, 0xff) }, { USB_DEVICE_INTERFACE_CLASS(CINTERION_VENDOR_ID, CINTERION_PRODUCT_AHXX_AUDIO, 0xff) }, { USB_DEVICE(CINTERION_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) }, @@ -1953,20 +1814,20 @@ static const struct usb_device_id option { USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC28_MDM) }, /* HC28 enumerates with Siemens or Cinterion VID depending on FW revision */ { USB_DEVICE(SIEMENS_VENDOR_ID, CINTERION_PRODUCT_HC28_MDMNET) }, { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD100), - .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + .driver_info = RSVD(4) }, { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD120), - .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + .driver_info = RSVD(4) }, { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD140), - .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + .driver_info = RSVD(4) }, { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD145) }, { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD155), - .driver_info = (kernel_ulong_t)&net_intf6_blacklist }, + .driver_info = RSVD(6) }, { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD200), - .driver_info = (kernel_ulong_t)&net_intf6_blacklist }, + .driver_info = RSVD(6) }, { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD160), - .driver_info = (kernel_ulong_t)&net_intf6_blacklist }, + .driver_info = RSVD(6) }, { USB_DEVICE(OLIVETTI_VENDOR_ID, OLIVETTI_PRODUCT_OLICARD500), - .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + .driver_info = RSVD(4) }, { USB_DEVICE(CELOT_VENDOR_ID, CELOT_PRODUCT_CT680M) }, /* CT-650 CDMA 450 1xEVDO modem */ { USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_GT_B3730, USB_CLASS_CDC_DATA, 0x00, 0x00) }, /* Samsung GT-B3730 LTE USB modem.*/ { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CEM600) }, @@ -2043,9 +1904,9 @@ static const struct usb_device_id option { USB_DEVICE(PETATEL_VENDOR_ID, PETATEL_PRODUCT_NP10T_600E) }, { USB_DEVICE_AND_INTERFACE_INFO(TPLINK_VENDOR_ID, TPLINK_PRODUCT_LTE, 0xff, 0x00, 0x00) }, /* TP-Link LTE Module */ { USB_DEVICE(TPLINK_VENDOR_ID, TPLINK_PRODUCT_MA180), - .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + .driver_info = RSVD(4) }, { USB_DEVICE(TPLINK_VENDOR_ID, 0x9000), /* TP-Link MA260 */ - .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + .driver_info = RSVD(4) }, { USB_DEVICE(CHANGHONG_VENDOR_ID, CHANGHONG_PRODUCT_CH690) }, { USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d01, 0xff) }, /* D-Link DWM-156 (variant) */ { USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d02, 0xff) }, @@ -2053,9 +1914,9 @@ static const struct usb_device_id option { USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d04, 0xff) }, /* D-Link DWM-158 */ { USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7d0e, 0xff) }, /* D-Link DWM-157 C1 */ { USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7e19, 0xff), /* D-Link DWM-221 B1 */ - .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + .driver_info = RSVD(4) }, { USB_DEVICE_INTERFACE_CLASS(0x2001, 0x7e35, 0xff), /* D-Link DWM-222 */ - .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, + .driver_info = RSVD(4) }, { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e01, 0xff, 0xff, 0xff) }, /* D-Link DWM-152/C1 */ { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3e02, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/C1 */ { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x7e11, 0xff, 0xff, 0xff) }, /* D-Link DWM-156/A3 */ @@ -2115,7 +1976,7 @@ static int option_probe(struct usb_seria struct usb_interface_descriptor *iface_desc = &serial->interface->cur_altsetting->desc; struct usb_device_descriptor *dev_desc = &serial->dev->descriptor; - const struct option_blacklist_info *blacklist; + unsigned long device_flags = id->driver_info;

/* Never bind to the CD-Rom emulation interface */ if (iface_desc->bInterfaceClass == 0x08) @@ -2126,9 +1987,7 @@ static int option_probe(struct usb_seria * the same class/subclass/protocol as the serial interfaces. Look at * the Windows driver .INF files for reserved interface numbers. */ - blacklist = (void *)id->driver_info; - if (blacklist && test_bit(iface_desc->bInterfaceNumber, - &blacklist->reserved)) + if (device_flags & RSVD(iface_desc->bInterfaceNumber)) return -ENODEV; /* * Don't bind network interface on Samsung GT-B3730, it is handled by @@ -2139,8 +1998,8 @@ static int option_probe(struct usb_seria iface_desc->bInterfaceClass != USB_CLASS_CDC_DATA) return -ENODEV;

- /* Store the blacklist info so we can use it during attach. */ - usb_set_serial_data(serial, (void *)blacklist); + /* Store the device flags so we can use them during attach. */ + usb_set_serial_data(serial, (void *)device_flags);

return 0; } @@ -2148,22 +2007,21 @@ static int option_probe(struct usb_seria static int option_attach(struct usb_serial *serial) { struct usb_interface_descriptor *iface_desc; - const struct option_blacklist_info *blacklist; struct usb_wwan_intf_private *data; + unsigned long device_flags;

data = kzalloc(sizeof(struct usb_wwan_intf_private), GFP_KERNEL); if (!data) return -ENOMEM;

- /* Retrieve blacklist info stored at probe. */ - blacklist = usb_get_serial_data(serial); + /* Retrieve device flags stored at probe. */ + device_flags = (unsigned long)usb_get_serial_data(serial);

iface_desc = &serial->interface->cur_altsetting->desc;

- if (!blacklist || !test_bit(iface_desc->bInterfaceNumber, - &blacklist->sendsetup)) { + if (!(device_flags & NCTRL(iface_desc->bInterfaceNumber))) data->use_send_setup = 1; - } + spin_lock_init(&data->susp_lock);

usb_set_serial_data(serial, data);

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Bin Liu b-liu@ti.com

commit 9aea9b6cc78d2b99b23d84fb2e0bc6e464c6569e upstream.

The usb_request pointer could be NULL in musb_g_tx(), where the tracepoint call would trigger the NULL pointer dereference failure when parsing the members of the usb_request pointer.

Move the tracepoint call to where the usb_request pointer is already checked to solve the issue.

Fixes: fc78003e5345 ("usb: musb: gadget: add usb-request tracepoints") Cc: stable@vger.kernel.org # v4.8+ Signed-off-by: Bin Liu b-liu@ti.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/usb/musb/musb_gadget.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -417,7 +417,6 @@ void musb_g_tx(struct musb *musb, u8 epn req = next_request(musb_ep); request = &req->request;

- trace_musb_req_tx(req); csr = musb_readw(epio, MUSB_TXCSR); musb_dbg(musb, "<== %s, txcsr %04x", musb_ep->end_point.name, csr);

@@ -456,6 +455,8 @@ void musb_g_tx(struct musb *musb, u8 epn u8 is_dma = 0; bool short_packet = false;

+ trace_musb_req_tx(req); + if (dma && (csr & MUSB_TXCSR_DMAENAB)) { is_dma = 1; csr |= MUSB_TXCSR_P_WZC_BITS;

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Peter Zijlstra peterz@infradead.org

commit e9088adda13cd23249d4b0abb97ff8a81bf5573a upstream.

Don't leave the tsc-early clocksource registered if it errors out early.

This was reported by Diego, who on his Core2 era machine got TSC invalidated while it was running with tsc-early (due to C-states). This results in keeping tsc-early with very bad effects.

Reported-and-Tested-by: Diego Viola diego.viola@gmail.com Fixes: aa83c45762a2 ("x86/tsc: Introduce early tsc clocksource") Signed-off-by: Peter Zijlstra (Intel) peterz@infradead.org Signed-off-by: Thomas Gleixner tglx@linutronix.de Reviewed-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Cc: len.brown@intel.com Cc: rjw@rjwysocki.net Cc: diego.viola@gmail.com Cc: rui.zhang@intel.com Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20180430100344.350507853@infradead.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/x86/kernel/tsc.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)

--- a/arch/x86/kernel/tsc.c +++ b/arch/x86/kernel/tsc.c @@ -1205,7 +1205,7 @@ static void tsc_refine_calibration_work(

/* Don't bother refining TSC on unstable systems */ if (tsc_unstable) - return; + goto unreg;

/* * Since the work is started early in boot, we may be @@ -1258,11 +1258,12 @@ static void tsc_refine_calibration_work(

out: if (tsc_unstable) - return; + goto unreg;

if (boot_cpu_has(X86_FEATURE_ART)) art_related_clocksource = &clocksource_tsc; clocksource_register_khz(&clocksource_tsc, tsc_khz); +unreg: clocksource_unregister(&clocksource_tsc_early); }

@@ -1272,8 +1273,8 @@ static int __init init_tsc_clocksource(v if (!boot_cpu_has(X86_FEATURE_TSC) || tsc_disabled > 0 || !tsc_khz) return 0;

- if (check_tsc_unstable()) - return 0; + if (tsc_unstable) + goto unreg;

if (tsc_clocksource_reliable) clocksource_tsc.flags &= ~CLOCK_SOURCE_MUST_VERIFY; @@ -1289,6 +1290,7 @@ static int __init init_tsc_clocksource(v if (boot_cpu_has(X86_FEATURE_ART)) art_related_clocksource = &clocksource_tsc; clocksource_register_khz(&clocksource_tsc, tsc_khz); +unreg: clocksource_unregister(&clocksource_tsc_early); return 0; }

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Agustin Vega-Frias agustinv@codeaurora.org

commit 1bc2463cee92ef0e2034c813d5e511adeb58b5fd upstream.

When the interrupts for a combiner span multiple registers it must be checked if any interrupts have been asserted on each register before checking for spurious interrupts.

Checking each register seperately leads to false positive warnings.

[ tglx: Massaged changelog ]

Fixes: f20cc9b00c7b ("irqchip/qcom: Add IRQ combiner driver") Signed-off-by: Agustin Vega-Frias agustinv@codeaurora.org Signed-off-by: Thomas Gleixner tglx@linutronix.de Cc: Jason Cooper jason@lakedaemon.net Cc: Marc Zyngier marc.zyngier@arm.com Cc: timur@codeaurora.org Cc: linux-arm-kernel@lists.infradead.org Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/1525184090-26143-1-git-send-email-agustinv@codeaur... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/irqchip/qcom-irq-combiner.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/irqchip/qcom-irq-combiner.c +++ b/drivers/irqchip/qcom-irq-combiner.c @@ -1,4 +1,4 @@ -/* Copyright (c) 2015-2016, The Linux Foundation. All rights reserved. +/* Copyright (c) 2015-2018, The Linux Foundation. All rights reserved. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 and @@ -68,7 +68,7 @@ static void combiner_handle_irq(struct i

bit = readl_relaxed(combiner->regs[reg].addr); status = bit & combiner->regs[reg].enabled; - if (!status) + if (bit && !status) pr_warn_ratelimited("Unexpected IRQ on CPU%d: (%08x %08lx %p)\n", smp_processor_id(), bit, combiner->regs[reg].enabled,

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Peter Zijlstra peterz@infradead.org

commit 5b9e886a4af97574ca3ce1147f35545da0e7afc7 upstream.

A number of places relies on list_empty(&cs->wd_list), however the list_head does not get initialized. Do so upon registration, such that thereafter it is possible to rely on list_empty() correctly reflecting the list membership status.

Signed-off-by: Peter Zijlstra (Intel) peterz@infradead.org Signed-off-by: Thomas Gleixner tglx@linutronix.de Tested-by: Diego Viola diego.viola@gmail.com Reviewed-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Cc: stable@vger.kernel.org Cc: len.brown@intel.com Cc: rjw@rjwysocki.net Cc: rui.zhang@intel.com Link: https://lkml.kernel.org/r/20180430100344.472662715@infradead.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- kernel/time/clocksource.c | 2 ++ 1 file changed, 2 insertions(+)

--- a/kernel/time/clocksource.c +++ b/kernel/time/clocksource.c @@ -332,6 +332,8 @@ static void clocksource_resume_watchdog(

static void clocksource_enqueue_watchdog(struct clocksource *cs) { + INIT_LIST_HEAD(&cs->wd_list); + if (cs->flags & CLOCK_SOURCE_MUST_VERIFY) { /* cs is a clocksource to be watched. */ list_add(&cs->wd_list, &watchdog_list);

4.16-stable review patch. If anyone has any objections, please let me know.

------------------

From: Song Liu songliubraving@fb.com

commit 0c92c7a3c5d416f47b32c5f20a611dfeca5d5f2e upstream.

As Miklos reported and suggested:

This pattern repeats two times in trace_uprobe.c and in kernel/events/core.c as well:

ret = kern_path(filename, LOOKUP_FOLLOW, &path); if (ret) goto fail_address_parse;

inode = igrab(d_inode(path.dentry)); path_put(&path);

And it's wrong. You can only hold a reference to the inode if you have an active ref to the superblock as well (which is normally through path.mnt) or holding s_umount.

This way unmounting the containing filesystem while the tracepoint is active will give you the "VFS: Busy inodes after unmount..." message and a crash when the inode is finally put.

Solution: store path instead of inode.

This patch fixes two instances in trace_uprobe.c. struct path is added to struct trace_uprobe to keep the inode and containing mount point referenced.

Link: http://lkml.kernel.org/r/20180423172135.4050588-1-songliubraving@fb.com

Fixes: f3f096cfedf8 ("tracing: Provide trace events interface for uprobes") Fixes: 33ea4b24277b ("perf/core: Implement the 'perf_uprobe' PMU") Cc: stable@vger.kernel.org Cc: Ingo Molnar mingo@redhat.com Cc: Howard McLauchlan hmclauchlan@fb.com Cc: Josef Bacik jbacik@fb.com Cc: Srikar Dronamraju srikar@linux.vnet.ibm.com Acked-by: Miklos Szeredi mszeredi@redhat.com Reported-by: Miklos Szeredi miklos@szeredi.hu Signed-off-by: Song Liu songliubraving@fb.com Signed-off-by: Steven Rostedt (VMware) rostedt@goodmis.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- kernel/trace/trace_uprobe.c | 24 ++++++++++-------------- 1 file changed, 10 insertions(+), 14 deletions(-)

--- a/kernel/trace/trace_uprobe.c +++ b/kernel/trace/trace_uprobe.c @@ -55,6 +55,7 @@ struct trace_uprobe { struct list_head list; struct trace_uprobe_filter filter; struct uprobe_consumer consumer; + struct path path; struct inode *inode; char *filename; unsigned long offset; @@ -287,7 +288,7 @@ static void free_trace_uprobe(struct tra for (i = 0; i < tu->tp.nr_args; i++) traceprobe_free_probe_arg(&tu->tp.args[i]);

- iput(tu->inode); + path_put(&tu->path); kfree(tu->tp.call.class->system); kfree(tu->tp.call.name); kfree(tu->filename); @@ -361,7 +362,6 @@ end: static int create_trace_uprobe(int argc, char **argv) { struct trace_uprobe *tu; - struct inode *inode; char *arg, *event, *group, *filename; char buf[MAX_EVENT_NAME_LEN]; struct path path; @@ -369,7 +369,6 @@ static int create_trace_uprobe(int argc, bool is_delete, is_return; int i, ret;

- inode = NULL; ret = 0; is_delete = false; is_return = false; @@ -435,21 +434,16 @@ static int create_trace_uprobe(int argc, } /* Find the last occurrence, in case the path contains ':' too. */ arg = strrchr(argv[1], ':'); - if (!arg) { - ret = -EINVAL; - goto fail_address_parse; - } + if (!arg) + return -EINVAL;

*arg++ = '\0'; filename = argv[1]; ret = kern_path(filename, LOOKUP_FOLLOW, &path); if (ret) - goto fail_address_parse; - - inode = igrab(d_inode(path.dentry)); - path_put(&path); + return ret;

- if (!inode || !S_ISREG(inode->i_mode)) { + if (!d_is_reg(path.dentry)) { ret = -EINVAL; goto fail_address_parse; } @@ -488,7 +482,7 @@ static int create_trace_uprobe(int argc, goto fail_address_parse; } tu->offset = offset; - tu->inode = inode; + tu->path = path; tu->filename = kstrdup(filename, GFP_KERNEL);

if (!tu->filename) { @@ -556,7 +550,7 @@ error: return ret;

fail_address_parse: - iput(inode); + path_put(&path);

pr_info("Failed to parse address or file.\n");

@@ -935,6 +929,7 @@ probe_event_enable(struct trace_uprobe * goto err_flags;

tu->consumer.filter = filter; + tu->inode = d_real_inode(tu->path.dentry); ret = uprobe_register(tu->inode, tu->offset, &tu->consumer); if (ret) goto err_buffer; @@ -980,6 +975,7 @@ probe_event_disable(struct trace_uprobe WARN_ON(!uprobe_filter_is_empty(&tu->filter));

uprobe_unregister(tu->inode, tu->offset, &tu->consumer); + tu->inode = NULL; tu->tp.flags &= file ? ~TP_FLAG_TRACE : ~TP_FLAG_PROFILE;

uprobe_buffer_disable();