From: Takashi Iwai tiwai@suse.de

commit 803cdb8ce584198cd45825822910cac7de6378cb upstream.

In commit f44cb4b19ed4 ("Bluetooth: btusb: Fix quirk for Atheros 1525/QCA6174") we tried to address the non-working Atheros BT devices by changing the quirk from BTUSB_ATH3012 to BTUSB_QCA_ROME. This made such devices working while it turned out to break other existing chips with the very same USB ID, hence it was reverted afterwards.

This is another attempt to tackle the issue. The essential point to use BTUSB_QCA_ROME is to apply the btusb_setup_qca() and do RAM- patching. And the previous attempt failed because btusb_setup_qca() returns -ENODEV if the ROM version doesn't match with the expected ones. For some devices that have already the "correct" ROM versions, we may just skip the setup procedure and continue the rest.

So, the first fix we'll need is to add a check of the ROM version in the function to skip the setup if the ROM version looks already sane, so that it can be applied for all ath devices.

However, the world is a bit more complex than that simple solution. Since BTUSB_ATH3012 quirk checks the bcdDevice and bails out when it's 0x0001 at the beginning of probing, so the device probe always aborts here.

In this patch, we add another check of ROM version again, and if the device needs patching, the probe continues. For that, a slight refactoring of btusb_qca_send_vendor_req() was required so that the probe function can pass usb_device pointer directly before allocating hci_dev stuff.

Fixes: commit f44cb4b19ed4 ("Bluetooth: btusb: Fix quirk for Atheros 1525/QCA6174") Bugzilla: http://bugzilla.opensuse.org/show_bug.cgi?id=1082504 Tested-by: Ivan Levshin ivan.levshin@microfocus.com Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Marcel Holtmann marcel@holtmann.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/bluetooth/btusb.c | 32 +++++++++++++++++++++++++------- 1 file changed, 25 insertions(+), 7 deletions(-)

--- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -2442,11 +2442,9 @@ static const struct qca_device_info qca_ { 0x00000302, 28, 4, 18 }, /* Rome 3.2 */ };

-static int btusb_qca_send_vendor_req(struct hci_dev *hdev, u8 request, +static int btusb_qca_send_vendor_req(struct usb_device *udev, u8 request, void *data, u16 size) { - struct btusb_data *btdata = hci_get_drvdata(hdev); - struct usb_device *udev = btdata->udev; int pipe, err; u8 *buf;

@@ -2461,7 +2459,7 @@ static int btusb_qca_send_vendor_req(str err = usb_control_msg(udev, pipe, request, USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, buf, size, USB_CTRL_SET_TIMEOUT); if (err < 0) { - BT_ERR("%s: Failed to access otp area (%d)", hdev->name, err); + dev_err(&udev->dev, "Failed to access otp area (%d)", err); goto done; }

@@ -2617,20 +2615,38 @@ static int btusb_setup_qca_load_nvm(stru return err; }

+/* identify the ROM version and check whether patches are needed */ +static bool btusb_qca_need_patch(struct usb_device *udev) +{ + struct qca_version ver; + + if (btusb_qca_send_vendor_req(udev, QCA_GET_TARGET_VERSION, &ver, + sizeof(ver)) < 0) + return false; + /* only low ROM versions need patches */ + return !(le32_to_cpu(ver.rom_version) & ~0xffffU); +} + static int btusb_setup_qca(struct hci_dev *hdev) { + struct btusb_data *btdata = hci_get_drvdata(hdev); + struct usb_device *udev = btdata->udev; const struct qca_device_info *info = NULL; struct qca_version ver; u32 ver_rom; u8 status; int i, err;

- err = btusb_qca_send_vendor_req(hdev, QCA_GET_TARGET_VERSION, &ver, + err = btusb_qca_send_vendor_req(udev, QCA_GET_TARGET_VERSION, &ver, sizeof(ver)); if (err < 0) return err;

ver_rom = le32_to_cpu(ver.rom_version); + /* Don't care about high ROM versions */ + if (ver_rom & ~0xffffU) + return 0; + for (i = 0; i < ARRAY_SIZE(qca_devices_table); i++) { if (ver_rom == qca_devices_table[i].rom_version) info = &qca_devices_table[i]; @@ -2641,7 +2657,7 @@ static int btusb_setup_qca(struct hci_de return -ENODEV; }

- err = btusb_qca_send_vendor_req(hdev, QCA_CHECK_STATUS, &status, + err = btusb_qca_send_vendor_req(udev, QCA_CHECK_STATUS, &status, sizeof(status)); if (err < 0) return err; @@ -2787,7 +2803,8 @@ static int btusb_probe(struct usb_interf

/* Old firmware would otherwise let ath3k driver load * patch and sysconfig files */ - if (le16_to_cpu(udev->descriptor.bcdDevice) <= 0x0001) + if (le16_to_cpu(udev->descriptor.bcdDevice) <= 0x0001 && + !btusb_qca_need_patch(udev)) return -ENODEV; }

@@ -2937,6 +2954,7 @@ static int btusb_probe(struct usb_interf }

if (id->driver_info & BTUSB_ATH3012) { + data->setup_on_usb = btusb_setup_qca; hdev->set_bdaddr = btusb_set_bdaddr_ath3012; set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks); set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);

From: Naveen N. Rao naveen.n.rao@linux.vnet.ibm.com

commit f28439db470cca8b6b082239314e9fd10bd39034 upstream.

Tag trace_percpu_buffer as a percpu pointer to resolve warnings reported by sparse: /linux/kernel/trace/trace.c:3218:46: warning: incorrect type in initializer (different address spaces) /linux/kernel/trace/trace.c:3218:46: expected void const [noderef] __percpu *__vpp_verify /linux/kernel/trace/trace.c:3218:46: got struct trace_buffer_struct * /linux/kernel/trace/trace.c:3234:9: warning: incorrect type in initializer (different address spaces) /linux/kernel/trace/trace.c:3234:9: expected void const [noderef] __percpu *__vpp_verify /linux/kernel/trace/trace.c:3234:9: got int *

Link: https://lkml.kernel.org/r/ebabd3f23101d89cb75671b68b6f819f5edc830b.164025530...

Cc: stable@vger.kernel.org Reported-by: kernel test robot lkp@intel.com Fixes: 07d777fe8c398 ("tracing: Add percpu buffers for trace_printk()") Signed-off-by: Naveen N. Rao naveen.n.rao@linux.vnet.ibm.com Signed-off-by: Steven Rostedt rostedt@goodmis.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- kernel/trace/trace.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -2354,7 +2354,7 @@ struct trace_buffer_struct { char buffer[4][TRACE_BUF_SIZE]; };

-static struct trace_buffer_struct *trace_percpu_buffer; +static struct trace_buffer_struct __percpu *trace_percpu_buffer;

/* * Thise allows for lockless recording. If we're nested too deeply, then @@ -2383,7 +2383,7 @@ static void put_trace_buf(void)

static int alloc_percpu_trace_buffer(void) { - struct trace_buffer_struct *buffers; + struct trace_buffer_struct __percpu *buffers;

buffers = alloc_percpu(struct trace_buffer_struct); if (WARN(!buffers, "Could not allocate percpu trace_printk buffer"))

From: Pavel Skripkin paskripkin@gmail.com

commit 754e4382354f7908923a1949d8dc8d05f82f09cb upstream.

Alexander reported a use of uninitialized value in atusb_set_extended_addr(), that is caused by reading 0 bytes via usb_control_msg().

Fix it by validating if the number of bytes transferred is actually correct, since usb_control_msg() may read less bytes, than was requested by caller.

Fail log:

BUG: KASAN: uninit-cmp in ieee802154_is_valid_extended_unicast_addr include/linux/ieee802154.h:310 [inline] BUG: KASAN: uninit-cmp in atusb_set_extended_addr drivers/net/ieee802154/atusb.c:1000 [inline] BUG: KASAN: uninit-cmp in atusb_probe.cold+0x29f/0x14db drivers/net/ieee802154/atusb.c:1056 Uninit value used in comparison: 311daa649a2003bd stack handle: 000000009a2003bd ieee802154_is_valid_extended_unicast_addr include/linux/ieee802154.h:310 [inline] atusb_set_extended_addr drivers/net/ieee802154/atusb.c:1000 [inline] atusb_probe.cold+0x29f/0x14db drivers/net/ieee802154/atusb.c:1056 usb_probe_interface+0x314/0x7f0 drivers/usb/core/driver.c:396

Fixes: 7490b008d123 ("ieee802154: add support for atusb transceiver") Reported-by: Alexander Potapenko glider@google.com Acked-by: Alexander Aring aahringo@redhat.com Signed-off-by: Pavel Skripkin paskripkin@gmail.com Link: https://lore.kernel.org/r/20220104182806.7188-1-paskripkin@gmail.com Signed-off-by: Stefan Schmidt stefan@datenfreihafen.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ieee802154/atusb.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)

--- a/drivers/net/ieee802154/atusb.c +++ b/drivers/net/ieee802154/atusb.c @@ -79,7 +79,9 @@ static int atusb_control_msg(struct atus

ret = usb_control_msg(usb_dev, pipe, request, requesttype, value, index, data, size, timeout); - if (ret < 0) { + if (ret < size) { + ret = ret < 0 ? ret : -ENODATA; + atusb->err = ret; dev_err(&usb_dev->dev, "atusb_control_msg: req 0x%02x val 0x%x idx 0x%x, error %d\n", @@ -637,9 +639,9 @@ static int atusb_get_and_show_build(stru if (!build) return -ENOMEM;

- ret = atusb_control_msg(atusb, usb_rcvctrlpipe(usb_dev, 0), - ATUSB_BUILD, ATUSB_REQ_FROM_DEV, 0, 0, - build, ATUSB_BUILD_SIZE, 1000); + /* We cannot call atusb_control_msg() here, since this request may read various length data */ + ret = usb_control_msg(atusb->usb_dev, usb_rcvctrlpipe(usb_dev, 0), ATUSB_BUILD, + ATUSB_REQ_FROM_DEV, 0, 0, build, ATUSB_BUILD_SIZE, 1000); if (ret >= 0) { build[ret] = 0; dev_info(&usb_dev->dev, "Firmware: build %s\n", build);

From: Jedrzej Jagielski jedrzej.jagielski@intel.com

commit e738451d78b2f8a9635d66c6a87f304b4d965f7a upstream.

There was a wrong queues representation in sysfs during driver's reinitialization in case of online cpus number is less than combined queues. It was caused by stopped NetworkManager, which is responsible for calling vsi_open function during driver's initialization. In specific situation (ex. 12 cpus online) there were 16 queues in /sys/class/net/<iface>/queues. In case of modifying queues with value higher, than number of online cpus, then it caused write errors and other errors. Add updating of sysfs's queues representation during driver initialization.

Fixes: 41c445ff0f48 ("i40e: main driver core") Signed-off-by: Lukasz Cieplicki lukaszx.cieplicki@intel.com Signed-off-by: Jedrzej Jagielski jedrzej.jagielski@intel.com Tested-by: Gurucharan G gurucharanx.g@intel.com Signed-off-by: Tony Nguyen anthony.l.nguyen@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/intel/i40e/i40e_main.c | 32 +++++++++++++++++++++------- 1 file changed, 25 insertions(+), 7 deletions(-)

--- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -5430,6 +5430,27 @@ int i40e_open(struct net_device *netdev) }

/** + * i40e_netif_set_realnum_tx_rx_queues - Update number of tx/rx queues + * @vsi: vsi structure + * + * This updates netdev's number of tx/rx queues + * + * Returns status of setting tx/rx queues + **/ +static int i40e_netif_set_realnum_tx_rx_queues(struct i40e_vsi *vsi) +{ + int ret; + + ret = netif_set_real_num_rx_queues(vsi->netdev, + vsi->num_queue_pairs); + if (ret) + return ret; + + return netif_set_real_num_tx_queues(vsi->netdev, + vsi->num_queue_pairs); +} + +/** * i40e_vsi_open - * @vsi: the VSI to open * @@ -5463,13 +5484,7 @@ int i40e_vsi_open(struct i40e_vsi *vsi) goto err_setup_rx;

/* Notify the stack of the actual queue counts. */ - err = netif_set_real_num_tx_queues(vsi->netdev, - vsi->num_queue_pairs); - if (err) - goto err_set_queues; - - err = netif_set_real_num_rx_queues(vsi->netdev, - vsi->num_queue_pairs); + err = i40e_netif_set_realnum_tx_rx_queues(vsi); if (err) goto err_set_queues;

@@ -9910,6 +9925,9 @@ struct i40e_vsi *i40e_vsi_setup(struct i ret = i40e_config_netdev(vsi); if (ret) goto err_netdev; + ret = i40e_netif_set_realnum_tx_rx_queues(vsi); + if (ret) + goto err_netdev; ret = register_netdev(vsi->netdev); if (ret) goto err_netdev;

From: Darrick J. Wong djwong@kernel.org

commit 983d8e60f50806f90534cc5373d0ce867e5aaf79 upstream.

The old ALLOCSP/FREESP ioctls in XFS can be used to preallocate space at the end of files, just like fallocate and RESVSP. Make the behavior consistent with the other ioctls.

Reported-by: Kirill Tkhai ktkhai@virtuozzo.com Signed-off-by: Darrick J. Wong djwong@kernel.org Signed-off-by: Darrick J. Wong darrick.wong@oracle.com Reviewed-by: Dave Chinner dchinner@redhat.com Reviewed-by: Eric Sandeen sandeen@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/xfs/xfs_ioctl.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/fs/xfs/xfs_ioctl.c +++ b/fs/xfs/xfs_ioctl.c @@ -712,7 +712,8 @@ xfs_ioc_space( flags |= XFS_PREALLOC_CLEAR; if (bf->l_start > XFS_ISIZE(ip)) { error = xfs_alloc_file_space(ip, XFS_ISIZE(ip), - bf->l_start - XFS_ISIZE(ip), 0); + bf->l_start - XFS_ISIZE(ip), + XFS_BMAPI_PREALLOC); if (error) goto out_unlock; }

From: Ian Abbott abbotti@mev.co.uk

commit bc6245e5efd70c41eaf9334b1b5e646745cb0fb3 upstream.

Including <linux/bug.h> pulls in a lot of bloat from <asm/bug.h> and <asm-generic/bug.h> that is not needed to call the BUILD_BUG() family of macros. Split them out into their own header, <linux/build_bug.h>.

Also correct some checkpatch.pl errors for the BUILD_BUG_ON_ZERO() and BUILD_BUG_ON_NULL() macros by adding parentheses around the bitfield widths that begin with a minus sign.

Link: http://lkml.kernel.org/r/20170525120316.24473-6-abbotti@mev.co.uk Signed-off-by: Ian Abbott abbotti@mev.co.uk Acked-by: Michal Nazarewicz mina86@mina86.com Acked-by: Kees Cook keescook@chromium.org Cc: Steven Rostedt rostedt@goodmis.org Cc: Peter Zijlstra peterz@infradead.org Cc: Jakub Kicinski jakub.kicinski@netronome.com Cc: Rasmus Villemoes linux@rasmusvillemoes.dk Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org [nathan: Just take this patch, not the checkpatch.pl patches before it] Signed-off-by: Nathan Chancellor nathan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- include/linux/bug.h | 72 --------------------------------------- include/linux/build_bug.h | 84 ++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 85 insertions(+), 71 deletions(-) create mode 100644 include/linux/build_bug.h

--- a/include/linux/bug.h +++ b/include/linux/bug.h @@ -3,6 +3,7 @@

#include <asm/bug.h> #include <linux/compiler.h> +#include <linux/build_bug.h>

enum bug_trap_type { BUG_TRAP_TYPE_NONE = 0, @@ -13,80 +14,9 @@ enum bug_trap_type { struct pt_regs;

#ifdef __CHECKER__ -#define __BUILD_BUG_ON_NOT_POWER_OF_2(n) (0) -#define BUILD_BUG_ON_NOT_POWER_OF_2(n) (0) -#define BUILD_BUG_ON_ZERO(e) (0) -#define BUILD_BUG_ON_NULL(e) ((void*)0) -#define BUILD_BUG_ON_INVALID(e) (0) -#define BUILD_BUG_ON_MSG(cond, msg) (0) -#define BUILD_BUG_ON(condition) (0) -#define BUILD_BUG() (0) #define MAYBE_BUILD_BUG_ON(cond) (0) #else /* __CHECKER__ */

-/* Force a compilation error if a constant expression is not a power of 2 */ -#define __BUILD_BUG_ON_NOT_POWER_OF_2(n) \ - BUILD_BUG_ON(((n) & ((n) - 1)) != 0) -#define BUILD_BUG_ON_NOT_POWER_OF_2(n) \ - BUILD_BUG_ON((n) == 0 || (((n) & ((n) - 1)) != 0)) - -/* Force a compilation error if condition is true, but also produce a - result (of value 0 and type size_t), so the expression can be used - e.g. in a structure initializer (or where-ever else comma expressions - aren't permitted). */ -#define BUILD_BUG_ON_ZERO(e) (sizeof(struct { int:-!!(e); })) -#define BUILD_BUG_ON_NULL(e) ((void *)sizeof(struct { int:-!!(e); })) - -/* - * BUILD_BUG_ON_INVALID() permits the compiler to check the validity of the - * expression but avoids the generation of any code, even if that expression - * has side-effects. - */ -#define BUILD_BUG_ON_INVALID(e) ((void)(sizeof((__force long)(e)))) - -/** - * BUILD_BUG_ON_MSG - break compile if a condition is true & emit supplied - * error message. - * @condition: the condition which the compiler should know is false. - * - * See BUILD_BUG_ON for description. - */ -#define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg) - -/** - * BUILD_BUG_ON - break compile if a condition is true. - * @condition: the condition which the compiler should know is false. - * - * If you have some code which relies on certain constants being equal, or - * some other compile-time-evaluated condition, you should use BUILD_BUG_ON to - * detect if someone changes it. - * - * The implementation uses gcc's reluctance to create a negative array, but gcc - * (as of 4.4) only emits that error for obvious cases (e.g. not arguments to - * inline functions). Luckily, in 4.3 they added the "error" function - * attribute just for this type of case. Thus, we use a negative sized array - * (should always create an error on gcc versions older than 4.4) and then call - * an undefined function with the error attribute (should always create an - * error on gcc 4.3 and later). If for some reason, neither creates a - * compile-time error, we'll still have a link-time error, which is harder to - * track down. - */ -#ifndef __OPTIMIZE__ -#define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)])) -#else -#define BUILD_BUG_ON(condition) \ - BUILD_BUG_ON_MSG(condition, "BUILD_BUG_ON failed: " #condition) -#endif - -/** - * BUILD_BUG - break compile if used. - * - * If you have some code that you expect the compiler to eliminate at - * build time, you should use BUILD_BUG to detect if it is - * unexpectedly used. - */ -#define BUILD_BUG() BUILD_BUG_ON_MSG(1, "BUILD_BUG failed") - #define MAYBE_BUILD_BUG_ON(cond) \ do { \ if (__builtin_constant_p((cond))) \ --- /dev/null +++ b/include/linux/build_bug.h @@ -0,0 +1,84 @@ +#ifndef _LINUX_BUILD_BUG_H +#define _LINUX_BUILD_BUG_H + +#include <linux/compiler.h> + +#ifdef __CHECKER__ +#define __BUILD_BUG_ON_NOT_POWER_OF_2(n) (0) +#define BUILD_BUG_ON_NOT_POWER_OF_2(n) (0) +#define BUILD_BUG_ON_ZERO(e) (0) +#define BUILD_BUG_ON_NULL(e) ((void *)0) +#define BUILD_BUG_ON_INVALID(e) (0) +#define BUILD_BUG_ON_MSG(cond, msg) (0) +#define BUILD_BUG_ON(condition) (0) +#define BUILD_BUG() (0) +#else /* __CHECKER__ */ + +/* Force a compilation error if a constant expression is not a power of 2 */ +#define __BUILD_BUG_ON_NOT_POWER_OF_2(n) \ + BUILD_BUG_ON(((n) & ((n) - 1)) != 0) +#define BUILD_BUG_ON_NOT_POWER_OF_2(n) \ + BUILD_BUG_ON((n) == 0 || (((n) & ((n) - 1)) != 0)) + +/* + * Force a compilation error if condition is true, but also produce a + * result (of value 0 and type size_t), so the expression can be used + * e.g. in a structure initializer (or where-ever else comma expressions + * aren't permitted). + */ +#define BUILD_BUG_ON_ZERO(e) (sizeof(struct { int:(-!!(e)); })) +#define BUILD_BUG_ON_NULL(e) ((void *)sizeof(struct { int:(-!!(e)); })) + +/* + * BUILD_BUG_ON_INVALID() permits the compiler to check the validity of the + * expression but avoids the generation of any code, even if that expression + * has side-effects. + */ +#define BUILD_BUG_ON_INVALID(e) ((void)(sizeof((__force long)(e)))) + +/** + * BUILD_BUG_ON_MSG - break compile if a condition is true & emit supplied + * error message. + * @condition: the condition which the compiler should know is false. + * + * See BUILD_BUG_ON for description. + */ +#define BUILD_BUG_ON_MSG(cond, msg) compiletime_assert(!(cond), msg) + +/** + * BUILD_BUG_ON - break compile if a condition is true. + * @condition: the condition which the compiler should know is false. + * + * If you have some code which relies on certain constants being equal, or + * some other compile-time-evaluated condition, you should use BUILD_BUG_ON to + * detect if someone changes it. + * + * The implementation uses gcc's reluctance to create a negative array, but gcc + * (as of 4.4) only emits that error for obvious cases (e.g. not arguments to + * inline functions). Luckily, in 4.3 they added the "error" function + * attribute just for this type of case. Thus, we use a negative sized array + * (should always create an error on gcc versions older than 4.4) and then call + * an undefined function with the error attribute (should always create an + * error on gcc 4.3 and later). If for some reason, neither creates a + * compile-time error, we'll still have a link-time error, which is harder to + * track down. + */ +#ifndef __OPTIMIZE__ +#define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)])) +#else +#define BUILD_BUG_ON(condition) \ + BUILD_BUG_ON_MSG(condition, "BUILD_BUG_ON failed: " #condition) +#endif + +/** + * BUILD_BUG - break compile if used. + * + * If you have some code that you expect the compiler to eliminate at + * build time, you should use BUILD_BUG to detect if it is + * unexpectedly used. + */ +#define BUILD_BUG() BUILD_BUG_ON_MSG(1, "BUILD_BUG failed") + +#endif /* __CHECKER__ */ + +#endif /* _LINUX_BUILD_BUG_H */

From: Mark Rutland mark.rutland@arm.com

commit 3ad47d055aa88d9f4189253f5b5c485f4c4626b2 upstream.

The early el2_setup code is a little convoluted, with two branches where one would do. This makes the code more painful to read than is necessary.

We can remove a branch and simplify the logic by moving the early return in the booted-at-EL1 case earlier in the function. This separates it from all the setup logic that only makes sense for EL2.

Acked-by: Marc Zyngier marc.zyngier@arm.com Signed-off-by: Mark Rutland mark.rutland@arm.com Cc: Will Deacon will.deacon@arm.com Signed-off-by: Catalin Marinas catalin.marinas@arm.com Signed-off-by: Nathan Chancellor nathan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/arm64/kernel/head.S | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-)

--- a/arch/arm64/kernel/head.S +++ b/arch/arm64/kernel/head.S @@ -489,13 +489,8 @@ ENTRY(el2_setup) msr SPsel, #1 // We want to use SP_EL{1,2} mrs x0, CurrentEL cmp x0, #CurrentEL_EL2 - b.ne 1f - mrs x0, sctlr_el2 -CPU_BE( orr x0, x0, #(1 << 25) ) // Set the EE bit for EL2 -CPU_LE( bic x0, x0, #(1 << 25) ) // Clear the EE bit for EL2 - msr sctlr_el2, x0 - b 2f -1: mrs x0, sctlr_el1 + b.eq 1f + mrs x0, sctlr_el1 CPU_BE( orr x0, x0, #(3 << 24) ) // Set the EE and E0E bits for EL1 CPU_LE( bic x0, x0, #(3 << 24) ) // Clear the EE and E0E bits for EL1 msr sctlr_el1, x0 @@ -503,7 +498,11 @@ CPU_LE( bic x0, x0, #(3 << 24) ) // Clea isb ret

-2: +1: mrs x0, sctlr_el2 +CPU_BE( orr x0, x0, #(1 << 25) ) // Set the EE bit for EL2 +CPU_LE( bic x0, x0, #(1 << 25) ) // Clear the EE bit for EL2 + msr sctlr_el2, x0 + #ifdef CONFIG_ARM64_VHE /* * Check for VHE being present. For the rest of the EL2 setup,

From: James Morse james.morse@arm.com

commit 7a00d68ebe5f07cb1db17e7fedfd031f0d87e8bb upstream.

__cpu_setup() configures SCTLR_EL1 using some hard coded hex masks, and el2_setup() duplicates some this when setting RES1 bits.

Lets make this the same as KVM's hyp_init, which uses named bits.

First, we add definitions for all the SCTLR_EL{1,2} bits, the RES{1,0} bits, and those we want to set or clear.

Add a build_bug checks to ensures all bits are either set or clear. This means we don't need to preserve endian-ness configuration generated elsewhere.

Finally, move the head.S and proc.S users of these hard-coded masks over to the macro versions.

Signed-off-by: James Morse james.morse@arm.com Signed-off-by: Catalin Marinas catalin.marinas@arm.com Signed-off-by: Ard Biesheuvel ard.biesheuvel@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Nathan Chancellor nathan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/arm64/include/asm/sysreg.h | 65 ++++++++++++++++++++++++++++++++++++++-- arch/arm64/kernel/head.S | 13 +------- arch/arm64/mm/proc.S | 24 -------------- 3 files changed, 67 insertions(+), 35 deletions(-)

--- a/arch/arm64/include/asm/sysreg.h +++ b/arch/arm64/include/asm/sysreg.h @@ -20,6 +20,7 @@ #ifndef __ASM_SYSREG_H #define __ASM_SYSREG_H

+#include <asm/compiler.h> #include <linux/stringify.h>

#include <asm/opcodes.h> @@ -88,25 +89,81 @@

/* Common SCTLR_ELx flags. */ #define SCTLR_ELx_EE (1 << 25) +#define SCTLR_ELx_WXN (1 << 19) #define SCTLR_ELx_I (1 << 12) #define SCTLR_ELx_SA (1 << 3) #define SCTLR_ELx_C (1 << 2) #define SCTLR_ELx_A (1 << 1) #define SCTLR_ELx_M 1

+#define SCTLR_ELx_FLAGS (SCTLR_ELx_M | SCTLR_ELx_A | SCTLR_ELx_C | \ + SCTLR_ELx_SA | SCTLR_ELx_I) + +/* SCTLR_EL2 specific flags. */ #define SCTLR_EL2_RES1 ((1 << 4) | (1 << 5) | (1 << 11) | (1 << 16) | \ (1 << 18) | (1 << 22) | (1 << 23) | (1 << 28) | \ (1 << 29)) +#define SCTLR_EL2_RES0 ((1 << 6) | (1 << 7) | (1 << 8) | (1 << 9) | \ + (1 << 10) | (1 << 13) | (1 << 14) | (1 << 15) | \ + (1 << 17) | (1 << 20) | (1 << 21) | (1 << 24) | \ + (1 << 26) | (1 << 27) | (1 << 30) | (1 << 31)) + +#ifdef CONFIG_CPU_BIG_ENDIAN +#define ENDIAN_SET_EL2 SCTLR_ELx_EE +#define ENDIAN_CLEAR_EL2 0 +#else +#define ENDIAN_SET_EL2 0 +#define ENDIAN_CLEAR_EL2 SCTLR_ELx_EE +#endif + +/* SCTLR_EL2 value used for the hyp-stub */ +#define SCTLR_EL2_SET (ENDIAN_SET_EL2 | SCTLR_EL2_RES1) +#define SCTLR_EL2_CLEAR (SCTLR_ELx_M | SCTLR_ELx_A | SCTLR_ELx_C | \ + SCTLR_ELx_SA | SCTLR_ELx_I | SCTLR_ELx_WXN | \ + ENDIAN_CLEAR_EL2 | SCTLR_EL2_RES0) + +/* Check all the bits are accounted for */ +#define SCTLR_EL2_BUILD_BUG_ON_MISSING_BITS BUILD_BUG_ON((SCTLR_EL2_SET ^ SCTLR_EL2_CLEAR) != ~0)

-#define SCTLR_ELx_FLAGS (SCTLR_ELx_M | SCTLR_ELx_A | SCTLR_ELx_C | \ - SCTLR_ELx_SA | SCTLR_ELx_I)

/* SCTLR_EL1 specific flags. */ #define SCTLR_EL1_UCI (1 << 26) +#define SCTLR_EL1_E0E (1 << 24) #define SCTLR_EL1_SPAN (1 << 23) +#define SCTLR_EL1_NTWE (1 << 18) +#define SCTLR_EL1_NTWI (1 << 16) #define SCTLR_EL1_UCT (1 << 15) +#define SCTLR_EL1_DZE (1 << 14) +#define SCTLR_EL1_UMA (1 << 9) #define SCTLR_EL1_SED (1 << 8) +#define SCTLR_EL1_ITD (1 << 7) #define SCTLR_EL1_CP15BEN (1 << 5) +#define SCTLR_EL1_SA0 (1 << 4) + +#define SCTLR_EL1_RES1 ((1 << 11) | (1 << 20) | (1 << 22) | (1 << 28) | \ + (1 << 29)) +#define SCTLR_EL1_RES0 ((1 << 6) | (1 << 10) | (1 << 13) | (1 << 17) | \ + (1 << 21) | (1 << 27) | (1 << 30) | (1 << 31)) + +#ifdef CONFIG_CPU_BIG_ENDIAN +#define ENDIAN_SET_EL1 (SCTLR_EL1_E0E | SCTLR_ELx_EE) +#define ENDIAN_CLEAR_EL1 0 +#else +#define ENDIAN_SET_EL1 0 +#define ENDIAN_CLEAR_EL1 (SCTLR_EL1_E0E | SCTLR_ELx_EE) +#endif + +#define SCTLR_EL1_SET (SCTLR_ELx_M | SCTLR_ELx_C | SCTLR_ELx_SA |\ + SCTLR_EL1_SA0 | SCTLR_EL1_SED | SCTLR_ELx_I |\ + SCTLR_EL1_DZE | SCTLR_EL1_UCT | SCTLR_EL1_NTWI |\ + SCTLR_EL1_NTWE | SCTLR_EL1_SPAN | ENDIAN_SET_EL1 |\ + SCTLR_EL1_UCI | SCTLR_EL1_RES1) +#define SCTLR_EL1_CLEAR (SCTLR_ELx_A | SCTLR_EL1_CP15BEN | SCTLR_EL1_ITD |\ + SCTLR_EL1_UMA | SCTLR_ELx_WXN | ENDIAN_CLEAR_EL1 |\ + SCTLR_EL1_RES0) + +/* Check all the bits are accounted for */ +#define SCTLR_EL1_BUILD_BUG_ON_MISSING_BITS BUILD_BUG_ON((SCTLR_EL1_SET ^ SCTLR_EL1_CLEAR) != ~0)

/* id_aa64isar0 */ #define ID_AA64ISAR0_RDM_SHIFT 28 @@ -244,6 +301,7 @@

#else

+#include <linux/build_bug.h> #include <linux/types.h>

asm( @@ -300,6 +358,9 @@ static inline void config_sctlr_el1(u32 { u32 val;

+ SCTLR_EL2_BUILD_BUG_ON_MISSING_BITS; + SCTLR_EL1_BUILD_BUG_ON_MISSING_BITS; + val = read_sysreg(sctlr_el1); val &= ~clear; val |= set; --- a/arch/arm64/kernel/head.S +++ b/arch/arm64/kernel/head.S @@ -490,17 +490,13 @@ ENTRY(el2_setup) mrs x0, CurrentEL cmp x0, #CurrentEL_EL2 b.eq 1f - mrs x0, sctlr_el1 -CPU_BE( orr x0, x0, #(3 << 24) ) // Set the EE and E0E bits for EL1 -CPU_LE( bic x0, x0, #(3 << 24) ) // Clear the EE and E0E bits for EL1 + mov_q x0, (SCTLR_EL1_RES1 | ENDIAN_SET_EL1) msr sctlr_el1, x0 mov w0, #BOOT_CPU_MODE_EL1 // This cpu booted in EL1 isb ret

-1: mrs x0, sctlr_el2 -CPU_BE( orr x0, x0, #(1 << 25) ) // Set the EE bit for EL2 -CPU_LE( bic x0, x0, #(1 << 25) ) // Clear the EE bit for EL2 +1: mov_q x0, (SCTLR_EL2_RES1 | ENDIAN_SET_EL2) msr sctlr_el2, x0

#ifdef CONFIG_ARM64_VHE @@ -585,10 +581,7 @@ install_el2_stub: * requires no configuration, and all non-hyp-specific EL2 setup * will be done via the _EL1 system register aliases in __cpu_setup. */ - /* sctlr_el1 */ - mov x0, #0x0800 // Set/clear RES{1,0} bits -CPU_BE( movk x0, #0x33d0, lsl #16 ) // Set EE and E0E on BE systems -CPU_LE( movk x0, #0x30d0, lsl #16 ) // Clear EE and E0E on LE systems + mov_q x0, (SCTLR_EL1_RES1 | ENDIAN_SET_EL1) msr sctlr_el1, x0

/* Coprocessor traps. */ --- a/arch/arm64/mm/proc.S +++ b/arch/arm64/mm/proc.S @@ -413,11 +413,7 @@ ENTRY(__cpu_setup) /* * Prepare SCTLR */ - adr x5, crval - ldp w5, w6, [x5] - mrs x0, sctlr_el1 - bic x0, x0, x5 // clear bits - orr x0, x0, x6 // set bits + mov_q x0, SCTLR_EL1_SET /* * Set/prepare TCR and TTBR. We use 512GB (39-bit) address range for * both user and kernel. @@ -453,21 +449,3 @@ ENTRY(__cpu_setup) msr tcr_el1, x10 ret // return to head.S ENDPROC(__cpu_setup) - - /* - * We set the desired value explicitly, including those of the - * reserved bits. The values of bits EE & E0E were set early in - * el2_setup, which are left untouched below. - * - * n n T - * U E WT T UD US IHBS - * CE0 XWHW CZ ME TEEA S - * .... .IEE .... NEAI TE.I ..AD DEN0 ACAM - * 0011 0... 1101 ..0. ..0. 10.. .0.. .... < hardware reserved - * .... .1.. .... 01.1 11.1 ..01 0.01 1101 < software settings - */ - .type crval, #object -crval: - .word 0xfcffffff // clear - .word 0x34d5d91d // set - .popsection

From: Lixiaokeng lixiaokeng@huawei.com

[ Upstream commit 1b8d0300a3e9f216ae4901bab886db7299899ec6 ]

|- iscsi_if_destroy_conn |-dev_attr_show |-iscsi_conn_teardown |-spin_lock_bh |-iscsi_sw_tcp_conn_get_param

|-kfree(conn->persistent_address) |-iscsi_conn_get_param |-kfree(conn->local_ipaddr) ==>|-read persistent_address ==>|-read local_ipaddr |-spin_unlock_bh

When iscsi_conn_teardown() and iscsi_conn_get_param() happen in parallel, a UAF may be triggered.

Link: https://lore.kernel.org/r/046ec8a0-ce95-d3fc-3235-666a7c65b224@huawei.com Reported-by: Lu Tixiong lutianxiong@huawei.com Reviewed-by: Mike Christie michael.christie@oracle.com Reviewed-by: Lee Duncan lduncan@suse.com Signed-off-by: Lixiaokeng lixiaokeng@huawei.com Signed-off-by: Linfeilong linfeilong@huawei.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/libiscsi.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 30e954bb6c81e..8d1a05d5eb4dd 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -2991,6 +2991,8 @@ void iscsi_conn_teardown(struct iscsi_cls_conn *cls_conn) { struct iscsi_conn *conn = cls_conn->dd_data; struct iscsi_session *session = conn->session; + char *tmp_persistent_address = conn->persistent_address; + char *tmp_local_ipaddr = conn->local_ipaddr;

del_timer_sync(&conn->transport_timer);

@@ -3012,8 +3014,6 @@ void iscsi_conn_teardown(struct iscsi_cls_conn *cls_conn) spin_lock_bh(&session->frwd_lock); free_pages((unsigned long) conn->data, get_order(ISCSI_DEF_MAX_RECV_SEG_LEN)); - kfree(conn->persistent_address); - kfree(conn->local_ipaddr); /* regular RX path uses back_lock */ spin_lock_bh(&session->back_lock); kfifo_in(&session->cmdpool.queue, (void*)&conn->login_task, @@ -3025,6 +3025,8 @@ void iscsi_conn_teardown(struct iscsi_cls_conn *cls_conn) mutex_unlock(&session->eh_mutex);

iscsi_destroy_conn(cls_conn); + kfree(tmp_persistent_address); + kfree(tmp_local_ipaddr); } EXPORT_SYMBOL_GPL(iscsi_conn_teardown);

From: yangxingwu xingwu.yang@gmail.com

[ Upstream commit 6c25449e1a32c594d743df8e8258e8ef870b6a77 ]

$ cat /pro/net/udp

before:

sl local_address rem_address st tx_queue rx_queue tr tm->when 26050: 0100007F:0035 00000000:0000 07 00000000:00000000 00:00000000 26320: 0100007F:0143 00000000:0000 07 00000000:00000000 00:00000000 27135: 00000000:8472 00000000:0000 07 00000000:00000000 00:00000000

after:

sl local_address rem_address st tx_queue rx_queue tr tm->when 26050: 0100007F:0035 00000000:0000 07 00000000:00000000 00:00000000 26320: 0100007F:0143 00000000:0000 07 00000000:00000000 00:00000000 27135: 00000000:8472 00000000:0000 07 00000000:00000000 00:00000000

Signed-off-by: yangxingwu xingwu.yang@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/ipv4/udp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index 860ab2e6544cc..8770966a564b5 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -2435,7 +2435,7 @@ int udp4_seq_show(struct seq_file *seq, void *v) { seq_setwidth(seq, 127); if (v == SEQ_START_TOKEN) - seq_puts(seq, " sl local_address rem_address st tx_queue " + seq_puts(seq, " sl local_address rem_address st tx_queue " "rx_queue tr tm->when retrnsmt uid timeout " "inode ref pointer drops"); else {

From: Nathan Chancellor nathan@kernel.org

commit 644106cdb89844be2496b21175b7c0c2e0fab381 upstream.

A new commit in LLVM causes an error on the use of 'long double' when '-mno-x87' is used, which the kernel does through an alias, '-mno-80387' (see the LLVM commit below for more details around why it does this).

drivers/power/reset/ltc2952-poweroff.c:162:28: error: expression requires 'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it data->wde_interval = 300L * 1E6L; ^ drivers/power/reset/ltc2952-poweroff.c:162:21: error: expression requires 'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it data->wde_interval = 300L * 1E6L; ^ drivers/power/reset/ltc2952-poweroff.c:163:41: error: expression requires 'long double' type support, but target 'x86_64-unknown-linux-gnu' does not support it data->trigger_delay = ktime_set(2, 500L*1E6L); ^ 3 errors generated.

This happens due to the use of a 'long double' literal. The 'E6' part of '1E6L' causes the literal to be a 'double' then the 'L' suffix promotes it to 'long double'.

There is no visible reason for floating point values in this driver, as the values are only assigned to integer types. Use NSEC_PER_MSEC, which is the same integer value as '1E6L', to avoid changing functionality but fix the error.

Fixes: 6647156c00cc ("power: reset: add LTC2952 poweroff driver") Link: https://github.com/ClangBuiltLinux/linux/issues/1497 Link: https://github.com/llvm/llvm-project/commit/a8083d42b1c346e21623a1d36d1f0cad... Signed-off-by: Nathan Chancellor nathan@kernel.org Reviewed-by: Nick Desaulniers ndesaulniers@google.com Signed-off-by: Sebastian Reichel sebastian.reichel@collabora.com [nathan: Resolve conflict due to lack of 8b0e195314fab] Signed-off-by: Nathan Chancellor nathan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/power/reset/ltc2952-poweroff.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/power/reset/ltc2952-poweroff.c +++ b/drivers/power/reset/ltc2952-poweroff.c @@ -169,8 +169,8 @@ static void ltc2952_poweroff_kill(void)

static void ltc2952_poweroff_default(struct ltc2952_poweroff *data) { - data->wde_interval = ktime_set(0, 300L*1E6L); - data->trigger_delay = ktime_set(2, 500L*1E6L); + data->wde_interval = ktime_set(0, 300L * NSEC_PER_MSEC); + data->trigger_delay = ktime_set(2, 500L * NSEC_PER_MSEC);

hrtimer_init(&data->timer_trigger, CLOCK_MONOTONIC, HRTIMER_MODE_REL); data->timer_trigger.function = ltc2952_poweroff_timer_trigger;