From: Wan Jiabing wanjiabing@vivo.com
[ Upstream commit 80c469a0a03763f814715f3d12b6f3964c7423e8 ]
Fix following coccicheck warning: ./arch/arm/mach-omap2/omap_hwmod.c:753:1-23: WARNING: Function for_each_matching_node should have of_node_put() before break
Early exits from for_each_matching_node should decrement the node reference counter.
Signed-off-by: Wan Jiabing wanjiabing@vivo.com Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/mach-omap2/omap_hwmod.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index ccb0e3732c0dc..31d1a21f60416 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -752,8 +752,10 @@ static int __init _init_clkctrl_providers(void)
for_each_matching_node(np, ti_clkctrl_match_table) { ret = _setup_clkctrl_provider(np); - if (ret) + if (ret) { + of_node_put(np); break; + } }
return ret;
From: Ye Guojin ye.guojin@zte.com.cn
[ Upstream commit 34596ba380b03d181e24efd50e2f21045bde3696 ]
This was found by coccicheck: ./arch/arm/mach-omap2/display.c, 272, 1-7, ERROR missing put_device; call of_find_device_by_node on line 258, but without a corresponding object release within this function.
Move the put_device() call before the if judgment.
Reported-by: Zeal Robot zealci@zte.com.cn Signed-off-by: Ye Guojin ye.guojin@zte.com.cn Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/mach-omap2/display.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index 6daaa645ae5d9..21413a9b7b6c6 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -263,9 +263,9 @@ static int __init omapdss_init_of(void) }
r = of_platform_populate(node, NULL, NULL, &pdev->dev); + put_device(&pdev->dev); if (r) { pr_err("Unable to populate DSS submodule devices\n"); - put_device(&pdev->dev); return r; }
From: Al Cooper alcooperx@gmail.com
[ Upstream commit 42fed57046fc74586d7058bd51a1c10ac9c690cb ]
The PHY client driver does a phy_exit() call on suspend or rmmod and the PHY driver needs to know the difference because some clocks need to be kept running for suspend but can be shutdown on unbind/rmmod (or if there are no PHY clients at all).
The fix is to use a PM notifier so the driver can tell if a PHY client is calling exit() because of a system suspend or a driver unbind/rmmod.
Signed-off-by: Al Cooper alcooperx@gmail.com Acked-by: Florian Fainelli f.fainelli@gmail.com Link: https://lore.kernel.org/r/20211201180653.35097-2-alcooperx@gmail.com Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/phy/broadcom/phy-brcm-usb.c | 38 +++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+)
diff --git a/drivers/phy/broadcom/phy-brcm-usb.c b/drivers/phy/broadcom/phy-brcm-usb.c index 116fb23aebd99..0f1deb6e0eabf 100644 --- a/drivers/phy/broadcom/phy-brcm-usb.c +++ b/drivers/phy/broadcom/phy-brcm-usb.c @@ -18,6 +18,7 @@ #include <linux/soc/brcmstb/brcmstb.h> #include <dt-bindings/phy/phy.h> #include <linux/mfd/syscon.h> +#include <linux/suspend.h>
#include "phy-brcm-usb-init.h"
@@ -70,12 +71,35 @@ struct brcm_usb_phy_data { int init_count; int wake_irq; struct brcm_usb_phy phys[BRCM_USB_PHY_ID_MAX]; + struct notifier_block pm_notifier; + bool pm_active; };
static s8 *node_reg_names[BRCM_REGS_MAX] = { "crtl", "xhci_ec", "xhci_gbl", "usb_phy", "usb_mdio", "bdc_ec" };
+static int brcm_pm_notifier(struct notifier_block *notifier, + unsigned long pm_event, + void *unused) +{ + struct brcm_usb_phy_data *priv = + container_of(notifier, struct brcm_usb_phy_data, pm_notifier); + + switch (pm_event) { + case PM_HIBERNATION_PREPARE: + case PM_SUSPEND_PREPARE: + priv->pm_active = true; + break; + case PM_POST_RESTORE: + case PM_POST_HIBERNATION: + case PM_POST_SUSPEND: + priv->pm_active = false; + break; + } + return NOTIFY_DONE; +} + static irqreturn_t brcm_usb_phy_wake_isr(int irq, void *dev_id) { struct phy *gphy = dev_id; @@ -91,6 +115,9 @@ static int brcm_usb_phy_init(struct phy *gphy) struct brcm_usb_phy_data *priv = container_of(phy, struct brcm_usb_phy_data, phys[phy->id]);
+ if (priv->pm_active) + return 0; + /* * Use a lock to make sure a second caller waits until * the base phy is inited before using it. @@ -120,6 +147,9 @@ static int brcm_usb_phy_exit(struct phy *gphy) struct brcm_usb_phy_data *priv = container_of(phy, struct brcm_usb_phy_data, phys[phy->id]);
+ if (priv->pm_active) + return 0; + dev_dbg(&gphy->dev, "EXIT\n"); if (phy->id == BRCM_USB_PHY_2_0) brcm_usb_uninit_eohci(&priv->ini); @@ -488,6 +518,9 @@ static int brcm_usb_phy_probe(struct platform_device *pdev) if (err) return err;
+ priv->pm_notifier.notifier_call = brcm_pm_notifier; + register_pm_notifier(&priv->pm_notifier); + mutex_init(&priv->mutex);
/* make sure invert settings are correct */ @@ -528,7 +561,10 @@ static int brcm_usb_phy_probe(struct platform_device *pdev)
static int brcm_usb_phy_remove(struct platform_device *pdev) { + struct brcm_usb_phy_data *priv = dev_get_drvdata(&pdev->dev); + sysfs_remove_group(&pdev->dev.kobj, &brcm_usb_phy_group); + unregister_pm_notifier(&priv->pm_notifier);
return 0; } @@ -539,6 +575,7 @@ static int brcm_usb_phy_suspend(struct device *dev) struct brcm_usb_phy_data *priv = dev_get_drvdata(dev);
if (priv->init_count) { + dev_dbg(dev, "SUSPEND\n"); priv->ini.wake_enabled = device_may_wakeup(dev); if (priv->phys[BRCM_USB_PHY_3_0].inited) brcm_usb_uninit_xhci(&priv->ini); @@ -578,6 +615,7 @@ static int brcm_usb_phy_resume(struct device *dev) * Uninitialize anything that wasn't previously initialized. */ if (priv->init_count) { + dev_dbg(dev, "RESUME\n"); if (priv->wake_irq >= 0) disable_irq_wake(priv->wake_irq); brcm_usb_init_common(&priv->ini);
From: Padmanabha Srinivasaiah treasure4paddy@gmail.com
[ Upstream commit 0cea730cac824edf78ffd3302938ed5fe2b9d50d ]
In service_callback path RCU dereferenced pointer struct vchiq_service need to be accessed inside rcu read-critical section.
Also userdata/user_service part of vchiq_service is accessed around different synchronization mechanism, getting an extra reference to a pointer keeps sematics simpler and avoids prolonged graceperiod.
Accessing vchiq_service with rcu_read_[lock/unlock] fixes below issue.
[ 32.201659] ============================= [ 32.201664] WARNING: suspicious RCU usage [ 32.201670] 5.15.11-rt24-v8+ #3 Not tainted [ 32.201680] ----------------------------- [ 32.201685] drivers/staging/vc04_services/interface/vchiq_arm/vchiq_core.h:529 suspicious rcu_dereference_check() usage! [ 32.201695] [ 32.201695] other info that might help us debug this: [ 32.201695] [ 32.201700] [ 32.201700] rcu_scheduler_active = 2, debug_locks = 1 [ 32.201708] no locks held by vchiq-slot/0/98. [ 32.201715] [ 32.201715] stack backtrace: [ 32.201723] CPU: 1 PID: 98 Comm: vchiq-slot/0 Not tainted 5.15.11-rt24-v8+ #3 [ 32.201733] Hardware name: Raspberry Pi 4 Model B Rev 1.4 (DT) [ 32.201739] Call trace: [ 32.201742] dump_backtrace+0x0/0x1b8 [ 32.201772] show_stack+0x20/0x30 [ 32.201784] dump_stack_lvl+0x8c/0xb8 [ 32.201799] dump_stack+0x18/0x34 [ 32.201808] lockdep_rcu_suspicious+0xe4/0xf8 [ 32.201817] service_callback+0x124/0x400 [ 32.201830] slot_handler_func+0xf60/0x1e20 [ 32.201839] kthread+0x19c/0x1a8 [ 32.201849] ret_from_fork+0x10/0x20
Tested-by: Stefan Wahren stefan.wahren@i2se.com Signed-off-by: Padmanabha Srinivasaiah treasure4paddy@gmail.com Link: https://lore.kernel.org/r/20211231195406.5479-1-treasure4paddy@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- .../interface/vchiq_arm/vchiq_arm.c | 20 +++++++++++++++++-- 1 file changed, 18 insertions(+), 2 deletions(-)
diff --git a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c index c650a32bcedff..b9505bb51f45c 100644 --- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c +++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c @@ -1058,15 +1058,27 @@ service_callback(enum vchiq_reason reason, struct vchiq_header *header,
DEBUG_TRACE(SERVICE_CALLBACK_LINE);
+ rcu_read_lock(); service = handle_to_service(handle); - if (WARN_ON(!service)) + if (WARN_ON(!service)) { + rcu_read_unlock(); return VCHIQ_SUCCESS; + }
user_service = (struct user_service *)service->base.userdata; instance = user_service->instance;
- if (!instance || instance->closing) + if (!instance || instance->closing) { + rcu_read_unlock(); return VCHIQ_SUCCESS; + } + + /* + * As hopping around different synchronization mechanism, + * taking an extra reference results in simpler implementation. + */ + vchiq_service_get(service); + rcu_read_unlock();
vchiq_log_trace(vchiq_arm_log_level, "%s - service %lx(%d,%p), reason %d, header %lx, instance %lx, bulk_userdata %lx", @@ -1097,6 +1109,7 @@ service_callback(enum vchiq_reason reason, struct vchiq_header *header, bulk_userdata); if (status != VCHIQ_SUCCESS) { DEBUG_TRACE(SERVICE_CALLBACK_LINE); + vchiq_service_put(service); return status; } } @@ -1105,10 +1118,12 @@ service_callback(enum vchiq_reason reason, struct vchiq_header *header, if (wait_for_completion_interruptible(&user_service->remove_event)) { vchiq_log_info(vchiq_arm_log_level, "%s interrupted", __func__); DEBUG_TRACE(SERVICE_CALLBACK_LINE); + vchiq_service_put(service); return VCHIQ_RETRY; } else if (instance->closing) { vchiq_log_info(vchiq_arm_log_level, "%s closing", __func__); DEBUG_TRACE(SERVICE_CALLBACK_LINE); + vchiq_service_put(service); return VCHIQ_ERROR; } DEBUG_TRACE(SERVICE_CALLBACK_LINE); @@ -1137,6 +1152,7 @@ service_callback(enum vchiq_reason reason, struct vchiq_header *header, header = NULL; } DEBUG_TRACE(SERVICE_CALLBACK_LINE); + vchiq_service_put(service);
if (skip_completion) return VCHIQ_SUCCESS;
From: Wan Jiabing wanjiabing@vivo.com
[ Upstream commit 46e994717807f4b935c44d81dde9dd8bcd9a4f5d ]
Fix following coccicheck warning: ./drivers/phy/mediatek/phy-mtk-tphy.c:994:6-29: duplicated argument to && or ||
The efuse_rx_imp is duplicate. Here should be efuse_tx_imp.
Signed-off-by: Wan Jiabing wanjiabing@vivo.com Acked-by: Chunfeng Yun chunfeng.yun@mediatek.com Link: https://lore.kernel.org/r/20220107025050.787720-1-wanjiabing@vivo.com Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/phy/mediatek/phy-mtk-tphy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/phy/mediatek/phy-mtk-tphy.c b/drivers/phy/mediatek/phy-mtk-tphy.c index 98a942c607a67..db39b0c4649a2 100644 --- a/drivers/phy/mediatek/phy-mtk-tphy.c +++ b/drivers/phy/mediatek/phy-mtk-tphy.c @@ -1125,7 +1125,7 @@ static int phy_efuse_get(struct mtk_tphy *tphy, struct mtk_phy_instance *instanc /* no efuse, ignore it */ if (!instance->efuse_intr && !instance->efuse_rx_imp && - !instance->efuse_rx_imp) { + !instance->efuse_tx_imp) { dev_warn(dev, "no u3 intr efuse, but dts enable it\n"); instance->efuse_sw_en = 0; break;
From: Tommaso Merciai tomm.merciai@gmail.com
[ Upstream commit 5c2b9c61ae5d8ad0a196d33b66ce44543be22281 ]
Add support for boost-up register of usb251xb hub. boost-up property control USB electrical drive strength This register can be set:
- Normal mode -> 0x00 - Low -> 0x01 - Medium -> 0x10 - High -> 0x11
(Normal Default)
References: - http://www.mouser.com/catalog/specsheets/2514.pdf p29
Reviewed-by: Richard Leitner richard.leitner@linux.dev Signed-off-by: Tommaso Merciai tomm.merciai@gmail.com Link: https://lore.kernel.org/r/20220128181713.96856-1-tomm.merciai@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/misc/usb251xb.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/misc/usb251xb.c b/drivers/usb/misc/usb251xb.c index 507deef1f7093..04c4e3fed0946 100644 --- a/drivers/usb/misc/usb251xb.c +++ b/drivers/usb/misc/usb251xb.c @@ -543,6 +543,9 @@ static int usb251xb_get_ofdata(struct usb251xb *hub, if (of_property_read_u16_array(np, "language-id", &hub->lang_id, 1)) hub->lang_id = USB251XB_DEF_LANGUAGE_ID;
+ if (of_property_read_u8(np, "boost-up", &hub->boost_up)) + hub->boost_up = USB251XB_DEF_BOOST_UP; + cproperty_char = of_get_property(np, "manufacturer", NULL); strlcpy(str, cproperty_char ? : USB251XB_DEF_MANUFACTURER_STRING, sizeof(str)); @@ -584,7 +587,6 @@ static int usb251xb_get_ofdata(struct usb251xb *hub, * may be as soon as needed. */ hub->bat_charge_en = USB251XB_DEF_BATTERY_CHARGING_ENABLE; - hub->boost_up = USB251XB_DEF_BOOST_UP; hub->boost_57 = USB251XB_DEF_BOOST_57; hub->boost_14 = USB251XB_DEF_BOOST_14; hub->port_map12 = USB251XB_DEF_PORT_MAP_12;
On Tue, Feb 15, 2022 at 10:26:29AM -0500, Sasha Levin wrote:
From: Tommaso Merciai tomm.merciai@gmail.com
[ Upstream commit 5c2b9c61ae5d8ad0a196d33b66ce44543be22281 ]
Add support for boost-up register of usb251xb hub. boost-up property control USB electrical drive strength This register can be set:
- Normal mode -> 0x00
- Low -> 0x01
- Medium -> 0x10
- High -> 0x11
(Normal Default)
References:
Reviewed-by: Richard Leitner richard.leitner@linux.dev Signed-off-by: Tommaso Merciai tomm.merciai@gmail.com Link: https://lore.kernel.org/r/20220128181713.96856-1-tomm.merciai@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org
drivers/usb/misc/usb251xb.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
This isn't needed in any stable tree, please drop it from all AUTOSEL branches.
thanks,
greg k-h
From: Guo Ren guoren@linux.alibaba.com
[ Upstream commit 1d4df649cbb4b26d19bea38ecff4b65b10a1bbca ]
The thead,c900-plic has been used in opensbi to distinguish PLIC [1]. Although PLICs have the same behaviors in Linux, they are different hardware with some custom initializing in firmware(opensbi).
Qute opensbi patch commit-msg by Samuel:
The T-HEAD PLIC implementation requires setting a delegation bit to allow access from S-mode. Now that the T-HEAD PLIC has its own compatible string, set this bit automatically from the PLIC driver, instead of reaching into the PLIC's MMIO space from another driver.
[1]: https://github.com/riscv-software-src/opensbi/commit/78c2b19218bd62653b9fb31...
Signed-off-by: Guo Ren guoren@linux.alibaba.com Cc: Anup Patel anup@brainfault.org Cc: Marc Zyngier maz@kernel.org Cc: Palmer Dabbelt palmer@dabbelt.com Cc: Samuel Holland samuel@sholland.org Cc: Thomas Gleixner tglx@linutronix.de Tested-by: Samuel Holland samuel@sholland.org Signed-off-by: Marc Zyngier maz@kernel.org Link: https://lore.kernel.org/r/20220130135634.1213301-3-guoren@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/irqchip/irq-sifive-plic.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/irqchip/irq-sifive-plic.c b/drivers/irqchip/irq-sifive-plic.c index 259065d271ef0..09cc98266d30f 100644 --- a/drivers/irqchip/irq-sifive-plic.c +++ b/drivers/irqchip/irq-sifive-plic.c @@ -398,3 +398,4 @@ static int __init plic_init(struct device_node *node,
IRQCHIP_DECLARE(sifive_plic, "sifive,plic-1.0.0", plic_init); IRQCHIP_DECLARE(riscv_plic0, "riscv,plic0", plic_init); /* for legacy systems */ +IRQCHIP_DECLARE(thead_c900_plic, "thead,c900-plic", plic_init); /* for firmware driver */
From: Nick Desaulniers ndesaulniers@google.com
[ Upstream commit bfb1a7c91fb7758273b4a8d735313d9cc388b502 ]
In __WARN_FLAGS(), we had two asm statements (abbreviated):
asm volatile("ud2"); asm volatile(".pushsection .discard.reachable");
These pair of statements are used to trigger an exception, but then help objtool understand that for warnings, control flow will be restored immediately afterwards.
The problem is that volatile is not a compiler barrier. GCC explicitly documents this:
Note that the compiler can move even volatile asm instructions relative to other code, including across jump instructions.
Also, no clobbers are specified to prevent instructions from subsequent statements from being scheduled by compiler before the second asm statement. This can lead to instructions from subsequent statements being emitted by the compiler before the second asm statement.
Providing a scheduling model such as via -march= options enables the compiler to better schedule instructions with known latencies to hide latencies from data hazards compared to inline asm statements in which latencies are not estimated.
If an instruction gets scheduled by the compiler between the two asm statements, then objtool will think that it is not reachable, producing a warning.
To prevent instructions from being scheduled in between the two asm statements, merge them.
Also remove an unnecessary unreachable() asm annotation from BUG() in favor of __builtin_unreachable(). objtool is able to track that the ud2 from BUG() terminates control flow within the function.
Link: https://gcc.gnu.org/onlinedocs/gcc/Extended-Asm.html#Volatile Link: https://github.com/ClangBuiltLinux/linux/issues/1483 Signed-off-by: Nick Desaulniers ndesaulniers@google.com Signed-off-by: Josh Poimboeuf jpoimboe@redhat.com Link: https://lore.kernel.org/r/20220202205557.2260694-1-ndesaulniers@google.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/include/asm/bug.h | 20 +++++++++++--------- include/linux/compiler.h | 21 +++++---------------- 2 files changed, 16 insertions(+), 25 deletions(-)
diff --git a/arch/x86/include/asm/bug.h b/arch/x86/include/asm/bug.h index 84b87538a15de..bab883c0b6fee 100644 --- a/arch/x86/include/asm/bug.h +++ b/arch/x86/include/asm/bug.h @@ -22,7 +22,7 @@
#ifdef CONFIG_DEBUG_BUGVERBOSE
-#define _BUG_FLAGS(ins, flags) \ +#define _BUG_FLAGS(ins, flags, extra) \ do { \ asm_inline volatile("1:\t" ins "\n" \ ".pushsection __bug_table,"aw"\n" \ @@ -31,7 +31,8 @@ do { \ "\t.word %c1" "\t# bug_entry::line\n" \ "\t.word %c2" "\t# bug_entry::flags\n" \ "\t.org 2b+%c3\n" \ - ".popsection" \ + ".popsection\n" \ + extra \ : : "i" (__FILE__), "i" (__LINE__), \ "i" (flags), \ "i" (sizeof(struct bug_entry))); \ @@ -39,14 +40,15 @@ do { \
#else /* !CONFIG_DEBUG_BUGVERBOSE */
-#define _BUG_FLAGS(ins, flags) \ +#define _BUG_FLAGS(ins, flags, extra) \ do { \ asm_inline volatile("1:\t" ins "\n" \ ".pushsection __bug_table,"aw"\n" \ "2:\t" __BUG_REL(1b) "\t# bug_entry::bug_addr\n" \ "\t.word %c0" "\t# bug_entry::flags\n" \ "\t.org 2b+%c1\n" \ - ".popsection" \ + ".popsection\n" \ + extra \ : : "i" (flags), \ "i" (sizeof(struct bug_entry))); \ } while (0) @@ -55,7 +57,7 @@ do { \
#else
-#define _BUG_FLAGS(ins, flags) asm volatile(ins) +#define _BUG_FLAGS(ins, flags, extra) asm volatile(ins)
#endif /* CONFIG_GENERIC_BUG */
@@ -63,8 +65,8 @@ do { \ #define BUG() \ do { \ instrumentation_begin(); \ - _BUG_FLAGS(ASM_UD2, 0); \ - unreachable(); \ + _BUG_FLAGS(ASM_UD2, 0, ""); \ + __builtin_unreachable(); \ } while (0)
/* @@ -75,9 +77,9 @@ do { \ */ #define __WARN_FLAGS(flags) \ do { \ + __auto_type f = BUGFLAG_WARNING|(flags); \ instrumentation_begin(); \ - _BUG_FLAGS(ASM_UD2, BUGFLAG_WARNING|(flags)); \ - annotate_reachable(); \ + _BUG_FLAGS(ASM_UD2, f, ASM_REACHABLE); \ instrumentation_end(); \ } while (0)
diff --git a/include/linux/compiler.h b/include/linux/compiler.h index 429dcebe2b992..0f7fd205ab7ea 100644 --- a/include/linux/compiler.h +++ b/include/linux/compiler.h @@ -117,14 +117,6 @@ void ftrace_likely_update(struct ftrace_likely_data *f, int val, */ #define __stringify_label(n) #n
-#define __annotate_reachable(c) ({ \ - asm volatile(__stringify_label(c) ":\n\t" \ - ".pushsection .discard.reachable\n\t" \ - ".long " __stringify_label(c) "b - .\n\t" \ - ".popsection\n\t" : : "i" (c)); \ -}) -#define annotate_reachable() __annotate_reachable(__COUNTER__) - #define __annotate_unreachable(c) ({ \ asm volatile(__stringify_label(c) ":\n\t" \ ".pushsection .discard.unreachable\n\t" \ @@ -133,24 +125,21 @@ void ftrace_likely_update(struct ftrace_likely_data *f, int val, }) #define annotate_unreachable() __annotate_unreachable(__COUNTER__)
-#define ASM_UNREACHABLE \ - "999:\n\t" \ - ".pushsection .discard.unreachable\n\t" \ - ".long 999b - .\n\t" \ +#define ASM_REACHABLE \ + "998:\n\t" \ + ".pushsection .discard.reachable\n\t" \ + ".long 998b - .\n\t" \ ".popsection\n\t"
/* Annotate a C jump table to allow objtool to follow the code flow */ #define __annotate_jump_table __section(".rodata..c_jump_table")
#else -#define annotate_reachable() #define annotate_unreachable() +# define ASM_REACHABLE #define __annotate_jump_table #endif
-#ifndef ASM_UNREACHABLE -# define ASM_UNREACHABLE -#endif #ifndef unreachable # define unreachable() do { \ annotate_unreachable(); \
From: Florian Westphal fw@strlen.de
[ Upstream commit 77b337196a9d87f3d6bb9b07c0436ecafbffda1e ]
Vivek Thrivikraman reported: An SCTP server application which is accessed continuously by client application. When the session disconnects the client retries to establish a connection. After restart of SCTP server application the session is not established because of stale conntrack entry with connection state CLOSED as below.
(removing this entry manually established new connection):
sctp 9 CLOSED src=10.141.189.233 [..] [ASSURED]
Just skip timeout update of closed entries, we don't want them to stay around forever.
Reported-and-tested-by: Vivek Thrivikraman vivek.thrivikraman@est.tech Closes: https://bugzilla.netfilter.org/show_bug.cgi?id=1579 Signed-off-by: Florian Westphal fw@strlen.de Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/nf_conntrack_proto_sctp.c | 9 +++++++++ 1 file changed, 9 insertions(+)
diff --git a/net/netfilter/nf_conntrack_proto_sctp.c b/net/netfilter/nf_conntrack_proto_sctp.c index 2394238d01c91..5a936334b517a 100644 --- a/net/netfilter/nf_conntrack_proto_sctp.c +++ b/net/netfilter/nf_conntrack_proto_sctp.c @@ -489,6 +489,15 @@ int nf_conntrack_sctp_packet(struct nf_conn *ct, pr_debug("Setting vtag %x for dir %d\n", ih->init_tag, !dir); ct->proto.sctp.vtag[!dir] = ih->init_tag; + + /* don't renew timeout on init retransmit so + * port reuse by client or NAT middlebox cannot + * keep entry alive indefinitely (incl. nat info). + */ + if (new_state == SCTP_CONNTRACK_CLOSED && + old_state == SCTP_CONNTRACK_CLOSED && + nf_ct_is_confirmed(ct)) + ignore = true; }
ct->proto.sctp.state = new_state;
From: Namjae Jeon linkinjeon@kernel.org
[ Upstream commit 97550c7478a2da93e348d8c3075d92cddd473a78 ]
ksmbd sets the inode number to UniqueId. However, the same UniqueId for dot and dotdot entry is set to the inode number of the parent inode. This patch set them using the current inode and parent inode.
Signed-off-by: Namjae Jeon linkinjeon@kernel.org Signed-off-by: Steve French stfrench@microsoft.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ksmbd/smb_common.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/fs/ksmbd/smb_common.c b/fs/ksmbd/smb_common.c index ef7f42b0290a8..9a7e211dbf4f4 100644 --- a/fs/ksmbd/smb_common.c +++ b/fs/ksmbd/smb_common.c @@ -308,14 +308,17 @@ int ksmbd_populate_dot_dotdot_entries(struct ksmbd_work *work, int info_level, for (i = 0; i < 2; i++) { struct kstat kstat; struct ksmbd_kstat ksmbd_kstat; + struct dentry *dentry;
if (!dir->dot_dotdot[i]) { /* fill dot entry info */ if (i == 0) { d_info->name = "."; d_info->name_len = 1; + dentry = dir->filp->f_path.dentry; } else { d_info->name = ".."; d_info->name_len = 2; + dentry = dir->filp->f_path.dentry->d_parent; }
if (!match_pattern(d_info->name, d_info->name_len, @@ -327,7 +330,7 @@ int ksmbd_populate_dot_dotdot_entries(struct ksmbd_work *work, int info_level, ksmbd_kstat.kstat = &kstat; ksmbd_vfs_fill_dentry_attrs(work, user_ns, - dir->filp->f_path.dentry->d_parent, + dentry, &ksmbd_kstat); rc = fn(conn, info_level, d_info, &ksmbd_kstat); if (rc)
From: Namjae Jeon linkinjeon@kernel.org
[ Upstream commit 04e260948a160d3b7d622bf4c8a96fa4577c09bd ]
When checking smb2 query directory packets from other servers, OutputBufferLength is different with ksmbd. Other servers add an unaligned next offset to OutputBufferLength for the last entry.
Signed-off-by: Namjae Jeon linkinjeon@kernel.org Signed-off-by: Steve French stfrench@microsoft.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ksmbd/smb2pdu.c | 7 ++++--- fs/ksmbd/vfs.h | 1 + 2 files changed, 5 insertions(+), 3 deletions(-)
diff --git a/fs/ksmbd/smb2pdu.c b/fs/ksmbd/smb2pdu.c index 1ff1e52f398fc..cbbbccdc5a0a5 100644 --- a/fs/ksmbd/smb2pdu.c +++ b/fs/ksmbd/smb2pdu.c @@ -3423,9 +3423,9 @@ static int smb2_populate_readdir_entry(struct ksmbd_conn *conn, int info_level, goto free_conv_name; }
- struct_sz = readdir_info_level_struct_sz(info_level); - next_entry_offset = ALIGN(struct_sz - 1 + conv_len, - KSMBD_DIR_INFO_ALIGNMENT); + struct_sz = readdir_info_level_struct_sz(info_level) - 1 + conv_len; + next_entry_offset = ALIGN(struct_sz, KSMBD_DIR_INFO_ALIGNMENT); + d_info->last_entry_off_align = next_entry_offset - struct_sz;
if (next_entry_offset > d_info->out_buf_len) { d_info->out_buf_len = 0; @@ -3977,6 +3977,7 @@ int smb2_query_dir(struct ksmbd_work *work) ((struct file_directory_info *) ((char *)rsp->Buffer + d_info.last_entry_offset)) ->NextEntryOffset = 0; + d_info.data_count -= d_info.last_entry_off_align;
rsp->StructureSize = cpu_to_le16(9); rsp->OutputBufferOffset = cpu_to_le16(72); diff --git a/fs/ksmbd/vfs.h b/fs/ksmbd/vfs.h index adf94a4f22fa6..8c37aaf936ab1 100644 --- a/fs/ksmbd/vfs.h +++ b/fs/ksmbd/vfs.h @@ -47,6 +47,7 @@ struct ksmbd_dir_info { int last_entry_offset; bool hide_dot_file; int flags; + int last_entry_off_align; };
struct ksmbd_readdir_data {
From: Christian Hewitt christianshewitt@gmail.com
[ Upstream commit 76577c9137456febb05b0e17d244113196a98968 ]
Add an additional reserved memory region for the BL32 trusted firmware present in many devices that boot from Amlogic vendor u-boot.
Suggested-by: Mateusz Krzak kszaquitto@gmail.com Signed-off-by: Christian Hewitt christianshewitt@gmail.com Reviewed-by: Neil Armstrong narmstrong@baylibre.com Reviewed-by: Kevin Hilman khilman@baylibre.com Signed-off-by: Neil Armstrong narmstrong@baylibre.com Link: https://lore.kernel.org/r/20220126044954.19069-2-christianshewitt@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/amlogic/meson-gx.dtsi | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi index 6b457b2c30a4b..aa14ea017a613 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi @@ -49,6 +49,12 @@ secmon_reserved_alt: secmon@5000000 { no-map; };
+ /* 32 MiB reserved for ARM Trusted Firmware (BL32) */ + secmon_reserved_bl32: secmon@5300000 { + reg = <0x0 0x05300000 0x0 0x2000000>; + no-map; + }; + linux,cma { compatible = "shared-dma-pool"; reusable;
From: Christian Hewitt christianshewitt@gmail.com
[ Upstream commit 08982a1b3aa2611c9c711d24825c9002d28536f4 ]
Add an additional reserved memory region for the BL32 trusted firmware present in many devices that boot from Amlogic vendor u-boot.
Signed-off-by: Christian Hewitt christianshewitt@gmail.com Reviewed-by: Neil Armstrong narmstrong@baylibre.com Reviewed-by: Kevin Hilman khilman@baylibre.com Signed-off-by: Neil Armstrong narmstrong@baylibre.com Link: https://lore.kernel.org/r/20220126044954.19069-3-christianshewitt@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi index 428449d98c0ae..a3a1ea0f21340 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi @@ -107,6 +107,12 @@ secmon_reserved: secmon@5000000 { no-map; };
+ /* 32 MiB reserved for ARM Trusted Firmware (BL32) */ + secmon_reserved_bl32: secmon@5300000 { + reg = <0x0 0x05300000 0x0 0x2000000>; + no-map; + }; + linux,cma { compatible = "shared-dma-pool"; reusable;
From: Christian Hewitt christianshewitt@gmail.com
[ Upstream commit f26573e2bc9dfd551a0d5c6971f18cc546543312 ]
The BL32/TEE reserved-memory region is now inherited from the common family dtsi (meson-g12-common) so we can drop it from board files.
Signed-off-by: Christian Hewitt christianshewitt@gmail.com Reviewed-by: Neil Armstrong narmstrong@baylibre.com Reviewed-by: Kevin Hilman khilman@baylibre.com Signed-off-by: Neil Armstrong narmstrong@baylibre.com Link: https://lore.kernel.org/r/20220126044954.19069-4-christianshewitt@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts | 8 -------- arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts | 8 -------- 2 files changed, 16 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts index d8838dde0f0f4..4fb31c2ba31c4 100644 --- a/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts +++ b/arch/arm64/boot/dts/amlogic/meson-g12a-sei510.dts @@ -157,14 +157,6 @@ vddio_ao1v8: regulator-vddio_ao1v8 { regulator-always-on; };
- reserved-memory { - /* TEE Reserved Memory */ - bl32_reserved: bl32@5000000 { - reg = <0x0 0x05300000 0x0 0x2000000>; - no-map; - }; - }; - sdio_pwrseq: sdio-pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts index 427475846fc70..a5d79f2f7c196 100644 --- a/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts +++ b/arch/arm64/boot/dts/amlogic/meson-sm1-sei610.dts @@ -203,14 +203,6 @@ vddio_ao1v8: regulator-vddio_ao1v8 { regulator-always-on; };
- reserved-memory { - /* TEE Reserved Memory */ - bl32_reserved: bl32@5000000 { - reg = <0x0 0x05300000 0x0 0x2000000>; - no-map; - }; - }; - sdio_pwrseq: sdio-pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
From: Axel Rasmussen axelrasmussen@google.com
[ Upstream commit 4cbd93c3c110447adc66cb67c08af21f939ae2d7 ]
When running the pidfd_fdinfo_test on arm64, it fails for me. After some digging, the reason is that the child exits due to SIGBUS, because it overflows the 1024 byte stack we've reserved for it.
To fix the issue, increase the stack size to 8192 bytes (this number is somewhat arbitrary, and was arrived at through experimentation -- I kept doubling until the failure no longer occurred).
Also, let's make the issue easier to debug. wait_for_pid() returns an ambiguous value: it may return -1 in all of these cases:
1. waitpid() itself returned -1 2. waitpid() returned success, but we found !WIFEXITED(status). 3. The child process exited, but it did so with a -1 exit code.
There's no way for the caller to tell the difference. So, at least log which occurred, so the test runner can debug things.
While debugging this, I found that we had !WIFEXITED(), because the child exited due to a signal. This seems like a reasonably common case, so also print out whether or not we have WIFSIGNALED(), and the associated WTERMSIG() (if any). This lets us see the SIGBUS I'm fixing clearly when it occurs.
Finally, I'm suspicious of allocating the child's stack on our stack. man clone(2) suggests that the correct way to do this is with mmap(), and in particular by setting MAP_STACK. So, switch to doing it that way instead.
Signed-off-by: Axel Rasmussen axelrasmussen@google.com Acked-by: Christian Brauner brauner@kernel.org Signed-off-by: Shuah Khan skhan@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/pidfd/pidfd.h | 13 ++++++++--- .../selftests/pidfd/pidfd_fdinfo_test.c | 22 +++++++++++++++---- 2 files changed, 28 insertions(+), 7 deletions(-)
diff --git a/tools/testing/selftests/pidfd/pidfd.h b/tools/testing/selftests/pidfd/pidfd.h index 01f8d3c0cf2cb..6922d6417e1cf 100644 --- a/tools/testing/selftests/pidfd/pidfd.h +++ b/tools/testing/selftests/pidfd/pidfd.h @@ -68,7 +68,7 @@ #define PIDFD_SKIP 3 #define PIDFD_XFAIL 4
-int wait_for_pid(pid_t pid) +static inline int wait_for_pid(pid_t pid) { int status, ret;
@@ -78,13 +78,20 @@ int wait_for_pid(pid_t pid) if (errno == EINTR) goto again;
+ ksft_print_msg("waitpid returned -1, errno=%d\n", errno); return -1; }
- if (!WIFEXITED(status)) + if (!WIFEXITED(status)) { + ksft_print_msg( + "waitpid !WIFEXITED, WIFSIGNALED=%d, WTERMSIG=%d\n", + WIFSIGNALED(status), WTERMSIG(status)); return -1; + }
- return WEXITSTATUS(status); + ret = WEXITSTATUS(status); + ksft_print_msg("waitpid WEXITSTATUS=%d\n", ret); + return ret; }
static inline int sys_pidfd_open(pid_t pid, unsigned int flags) diff --git a/tools/testing/selftests/pidfd/pidfd_fdinfo_test.c b/tools/testing/selftests/pidfd/pidfd_fdinfo_test.c index 22558524f71c3..3fd8e903118f5 100644 --- a/tools/testing/selftests/pidfd/pidfd_fdinfo_test.c +++ b/tools/testing/selftests/pidfd/pidfd_fdinfo_test.c @@ -12,6 +12,7 @@ #include <string.h> #include <syscall.h> #include <sys/wait.h> +#include <sys/mman.h>
#include "pidfd.h" #include "../kselftest.h" @@ -80,7 +81,10 @@ static inline int error_check(struct error *err, const char *test_name) return err->code; }
+#define CHILD_STACK_SIZE 8192 + struct child { + char *stack; pid_t pid; int fd; }; @@ -89,17 +93,22 @@ static struct child clone_newns(int (*fn)(void *), void *args, struct error *err) { static int flags = CLONE_PIDFD | CLONE_NEWPID | CLONE_NEWNS | SIGCHLD; - size_t stack_size = 1024; - char *stack[1024] = { 0 }; struct child ret;
if (!(flags & CLONE_NEWUSER) && geteuid() != 0) flags |= CLONE_NEWUSER;
+ ret.stack = mmap(NULL, CHILD_STACK_SIZE, PROT_READ | PROT_WRITE, + MAP_PRIVATE | MAP_ANONYMOUS | MAP_STACK, -1, 0); + if (ret.stack == MAP_FAILED) { + error_set(err, -1, "mmap of stack failed (errno %d)", errno); + return ret; + } + #ifdef __ia64__ - ret.pid = __clone2(fn, stack, stack_size, flags, args, &ret.fd); + ret.pid = __clone2(fn, ret.stack, CHILD_STACK_SIZE, flags, args, &ret.fd); #else - ret.pid = clone(fn, stack + stack_size, flags, args, &ret.fd); + ret.pid = clone(fn, ret.stack + CHILD_STACK_SIZE, flags, args, &ret.fd); #endif
if (ret.pid < 0) { @@ -129,6 +138,11 @@ static inline int child_join(struct child *child, struct error *err) else if (r > 0) error_set(err, r, "child %d reported: %d", child->pid, r);
+ if (munmap(child->stack, CHILD_STACK_SIZE)) { + error_set(err, -1, "munmap of child stack failed (errno %d)", errno); + r = -1; + } + return r; }
From: Axel Rasmussen axelrasmussen@google.com
[ Upstream commit e2aa5e650b07693477dff554053605976789fd68 ]
These are some trivial fixups, which were needed to build the tests with clang and -Werror. The following issues are fixed:
- Remove various unused variables. - In child_poll_leader_exit_test, clang isn't smart enough to realize syscall(SYS_exit, 0) won't return, so it complains we never return from a non-void function. Add an extra exit(0) to appease it. - In test_pidfd_poll_leader_exit, ret may be branched on despite being uninitialized, if we have !use_waitpid. Initialize it to zero to get the right behavior in that case.
Signed-off-by: Axel Rasmussen axelrasmussen@google.com Acked-by: Christian Brauner brauner@kernel.org Signed-off-by: Shuah Khan skhan@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/clone3/clone3.c | 2 -- tools/testing/selftests/pidfd/pidfd_test.c | 6 +++--- tools/testing/selftests/pidfd/pidfd_wait.c | 5 ++--- 3 files changed, 5 insertions(+), 8 deletions(-)
diff --git a/tools/testing/selftests/clone3/clone3.c b/tools/testing/selftests/clone3/clone3.c index 076cf4325f783..cd4582129c7d6 100644 --- a/tools/testing/selftests/clone3/clone3.c +++ b/tools/testing/selftests/clone3/clone3.c @@ -126,8 +126,6 @@ static void test_clone3(uint64_t flags, size_t size, int expected,
int main(int argc, char *argv[]) { - pid_t pid; - uid_t uid = getuid();
ksft_print_header(); diff --git a/tools/testing/selftests/pidfd/pidfd_test.c b/tools/testing/selftests/pidfd/pidfd_test.c index 529eb700ac26a..9a2d64901d591 100644 --- a/tools/testing/selftests/pidfd/pidfd_test.c +++ b/tools/testing/selftests/pidfd/pidfd_test.c @@ -441,7 +441,6 @@ static void test_pidfd_poll_exec(int use_waitpid) { int pid, pidfd = 0; int status, ret; - pthread_t t1; time_t prog_start = time(NULL); const char *test_name = "pidfd_poll check for premature notification on child thread exec";
@@ -500,13 +499,14 @@ static int child_poll_leader_exit_test(void *args) */ *child_exit_secs = time(NULL); syscall(SYS_exit, 0); + /* Never reached, but appeases compiler thinking we should return. */ + exit(0); }
static void test_pidfd_poll_leader_exit(int use_waitpid) { int pid, pidfd = 0; - int status, ret; - time_t prog_start = time(NULL); + int status, ret = 0; const char *test_name = "pidfd_poll check for premature notification on non-empty" "group leader exit";
diff --git a/tools/testing/selftests/pidfd/pidfd_wait.c b/tools/testing/selftests/pidfd/pidfd_wait.c index be2943f072f60..17999e082aa71 100644 --- a/tools/testing/selftests/pidfd/pidfd_wait.c +++ b/tools/testing/selftests/pidfd/pidfd_wait.c @@ -39,7 +39,7 @@ static int sys_waitid(int which, pid_t pid, siginfo_t *info, int options,
TEST(wait_simple) { - int pidfd = -1, status = 0; + int pidfd = -1; pid_t parent_tid = -1; struct clone_args args = { .parent_tid = ptr_to_u64(&parent_tid), @@ -47,7 +47,6 @@ TEST(wait_simple) .flags = CLONE_PIDFD | CLONE_PARENT_SETTID, .exit_signal = SIGCHLD, }; - int ret; pid_t pid; siginfo_t info = { .si_signo = 0, @@ -88,7 +87,7 @@ TEST(wait_simple)
TEST(wait_states) { - int pidfd = -1, status = 0; + int pidfd = -1; pid_t parent_tid = -1; struct clone_args args = { .parent_tid = ptr_to_u64(&parent_tid),
From: Shakeel Butt shakeelb@google.com
[ Upstream commit 0a3f1e0beacf6cc8ae5f846b0641c1df476e83d6 ]
On an overcommitted system which is running multiple workloads of varying priorities, it is preferred to trigger an oom-killer to kill a low priority workload than to let the high priority workload receiving ENOMEMs. On our memory overcommitted systems, we are seeing a lot of ENOMEMs instead of oom-kills because io_uring_setup callchain is using __GFP_NORETRY gfp flag which avoids the oom-killer. Let's remove it and allow the oom-killer to kill a lower priority job.
Signed-off-by: Shakeel Butt shakeelb@google.com Link: https://lore.kernel.org/r/20220125051736.2981459-1-shakeelb@google.com Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- fs/io_uring.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/fs/io_uring.c b/fs/io_uring.c index 698db7fb62e06..a92f276f21d9c 100644 --- a/fs/io_uring.c +++ b/fs/io_uring.c @@ -8872,10 +8872,9 @@ static void io_mem_free(void *ptr)
static void *io_mem_alloc(size_t size) { - gfp_t gfp_flags = GFP_KERNEL | __GFP_ZERO | __GFP_NOWARN | __GFP_COMP | - __GFP_NORETRY | __GFP_ACCOUNT; + gfp_t gfp = GFP_KERNEL_ACCOUNT | __GFP_ZERO | __GFP_NOWARN | __GFP_COMP;
- return (void *) __get_free_pages(gfp_flags, get_order(size)); + return (void *) __get_free_pages(gfp, get_order(size)); }
static unsigned long rings_size(unsigned sq_entries, unsigned cq_entries,
From: Mario Limonciello mario.limonciello@amd.com
[ Upstream commit d6ebb17ccc7b37872a32bc25b4a21f1e5af8c7e3 ]
Testing on various upcoming OEM systems shows commit 7b167c4cb48e ("ACPI: PM: Only mark EC GPE for wakeup on Intel systems") was short sighted and the symptoms were indicative of other problems. Some OEMs do have the dedicated GPIOs for the power button but also rely upon an interrupt to the EC SCI to let the lid work.
The original commit showed spurious activity on Lenovo systems: * On both Lenovo T14 and P14s the keyboard wakeup doesn't work, and sometimes the power button event doesn't work.
This was confirmed on my end at that time.
However further development in the kernel showed that the issue was actually the IRQ for the GPIO controller was also shared with the EC SCI. This was actually fixed by commit 2d54067fcd23 ("pinctrl: amd: Fix wakeups when IRQ is shared with SCI").
The original commit also showed problems with AC adapter: * On HP 635 G7 detaching or attaching AC during suspend will cause the system not to wakeup * On Asus vivobook to prevent detaching AC causing resume problems * On Lenovo 14ARE05 to prevent detaching AC causing resume problems * On HP ENVY x360 to prevent detaching AC causing resume problems
Detaching AC adapter causing problems appears to have been a problem because the EC SCI went off to notify the OS of the power adapter change but the SCI was ignored and there was no other way to wake up this system since GPIO controller wasn't properly enabled. The wakeups were fixed by enabling the GPIO controller in commit acd47b9f28e5 ("pinctrl: amd: Handle wake-up interrupt").
I've confirmed on a variety of OEM notebooks with the following test
1) echo 1 | sudo tee /sys/power/pm_debug_messages 2) sudo systemctl suspend 3) unplug AC adapter, make sure system is still asleep 4) wake system from lid (which is provided by ACPI SCI on some of them) 5) dmesg a) see the EC GPE dispatched, timekeeping for X seconds (matching ~time until AC adapter plug out) b) see timekeeping for Y seconds until woke (matching ~time from AC adapter until lid event) 6) Look at /sys/kernel/debug/amd_pmc/s0ix_stats "Time (in us) in S0i3" = X + Y - firmware processing time
Signed-off-by: Mario Limonciello mario.limonciello@amd.com Tested-by: Kai-Heng Feng kai.heng.feng@canonical.com Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/acpi/x86/s2idle.c | 12 ++++-------- 1 file changed, 4 insertions(+), 8 deletions(-)
diff --git a/drivers/acpi/x86/s2idle.c b/drivers/acpi/x86/s2idle.c index 1c48358b43ba3..e0185e841b2a3 100644 --- a/drivers/acpi/x86/s2idle.c +++ b/drivers/acpi/x86/s2idle.c @@ -424,15 +424,11 @@ static int lps0_device_attach(struct acpi_device *adev, mem_sleep_current = PM_SUSPEND_TO_IDLE;
/* - * Some Intel based LPS0 systems, like ASUS Zenbook UX430UNR/i7-8550U don't - * use intel-hid or intel-vbtn but require the EC GPE to be enabled while - * suspended for certain wakeup devices to work, so mark it as wakeup-capable. - * - * Only enable on !AMD as enabling this universally causes problems for a number - * of AMD based systems. + * Some LPS0 systems, like ASUS Zenbook UX430UNR/i7-8550U, require the + * EC GPE to be enabled while suspended for certain wakeup devices to + * work, so mark it as wakeup-capable. */ - if (!acpi_s2idle_vendor_amd()) - acpi_ec_mark_gpe_for_wake(); + acpi_ec_mark_gpe_for_wake();
return 0; }
From: Brenda Streiff brenda.streiff@ni.com
[ Upstream commit 8a4c5b2a6d8ea079fa36034e8167de87ab6f8880 ]
The 'shell' built-in only returns the first 256 bytes of the command's output. In some cases, 'shell' is used to return a path; by bumping up the buffer size to 4096 this lets us capture up to PATH_MAX.
The specific case where I ran into this was due to commit 1e860048c53e ("gcc-plugins: simplify GCC plugin-dev capability test"). After this change, we now use `$(shell,$(CC) -print-file-name=plugin)` to return a path; if the gcc path is particularly long, then the path ends up truncated at the 256 byte mark, which makes the HAVE_GCC_PLUGINS depends test always fail.
Signed-off-by: Brenda Streiff brenda.streiff@ni.com Signed-off-by: Masahiro Yamada masahiroy@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- scripts/kconfig/preprocess.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/scripts/kconfig/preprocess.c b/scripts/kconfig/preprocess.c index 0590f86df6e40..748da578b418c 100644 --- a/scripts/kconfig/preprocess.c +++ b/scripts/kconfig/preprocess.c @@ -141,7 +141,7 @@ static char *do_lineno(int argc, char *argv[]) static char *do_shell(int argc, char *argv[]) { FILE *p; - char buf[256]; + char buf[4096]; char *cmd; size_t nread; int i;
From: James Smart jsmart2021@gmail.com
[ Upstream commit c80b27cfd93ba9f5161383f798414609e84729f3 ]
The driver is initiating NVMe PRLIs to determine device NVMe support. This should not be occurring if CONFIG_NVME_FC support is disabled.
Correct this by changing the default value for FC4 support. Currently it defaults to FCP and NVMe. With change, when NVME_FC support is not enabled in the kernel, the default value is just FCP.
Link: https://lore.kernel.org/r/20220207180516.73052-1-jsmart2021@gmail.com Reviewed-by: Ewan D. Milne emilne@redhat.com Signed-off-by: James Smart jsmart2021@gmail.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/lpfc/lpfc.h | 13 ++++++++++--- drivers/scsi/lpfc/lpfc_attr.c | 4 ++-- 2 files changed, 12 insertions(+), 5 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h index 54c58392fd5d0..f74a1c09c3518 100644 --- a/drivers/scsi/lpfc/lpfc.h +++ b/drivers/scsi/lpfc/lpfc.h @@ -1165,6 +1165,16 @@ struct lpfc_hba { uint32_t cfg_hostmem_hgp; uint32_t cfg_log_verbose; uint32_t cfg_enable_fc4_type; +#define LPFC_ENABLE_FCP 1 +#define LPFC_ENABLE_NVME 2 +#define LPFC_ENABLE_BOTH 3 +#if (IS_ENABLED(CONFIG_NVME_FC)) +#define LPFC_MAX_ENBL_FC4_TYPE LPFC_ENABLE_BOTH +#define LPFC_DEF_ENBL_FC4_TYPE LPFC_ENABLE_BOTH +#else +#define LPFC_MAX_ENBL_FC4_TYPE LPFC_ENABLE_FCP +#define LPFC_DEF_ENBL_FC4_TYPE LPFC_ENABLE_FCP +#endif uint32_t cfg_aer_support; uint32_t cfg_sriov_nr_virtfn; uint32_t cfg_request_firmware_upgrade; @@ -1186,9 +1196,6 @@ struct lpfc_hba { uint32_t cfg_ras_fwlog_func; uint32_t cfg_enable_bbcr; /* Enable BB Credit Recovery */ uint32_t cfg_enable_dpp; /* Enable Direct Packet Push */ -#define LPFC_ENABLE_FCP 1 -#define LPFC_ENABLE_NVME 2 -#define LPFC_ENABLE_BOTH 3 uint32_t cfg_enable_pbde; uint32_t cfg_enable_mi; struct nvmet_fc_target_port *targetport; diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 7a7f17d71811b..bac78fbce8d6e 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -3978,8 +3978,8 @@ LPFC_ATTR_R(nvmet_mrq_post, * 3 - register both FCP and NVME * Supported values are [1,3]. Default value is 3 */ -LPFC_ATTR_R(enable_fc4_type, LPFC_ENABLE_BOTH, - LPFC_ENABLE_FCP, LPFC_ENABLE_BOTH, +LPFC_ATTR_R(enable_fc4_type, LPFC_DEF_ENBL_FC4_TYPE, + LPFC_ENABLE_FCP, LPFC_MAX_ENBL_FC4_TYPE, "Enable FC4 Protocol support - FCP / NVME");
/*
From: James Smart jsmart2021@gmail.com
[ Upstream commit 5852ed2a6a39c862c8a3fdf646e1f4e01b91d710 ]
Messages around firmware download were incorrectly tagged as being related to discovery trace events. Thus, firmware download status ended up dumping the trace log as well as the firmware update message. As there were a couple of log messages in this state, the trace log was dumped multiple times.
Resolve this by converting from trace events to SLI events.
Link: https://lore.kernel.org/r/20220207180442.72836-1-jsmart2021@gmail.com Reviewed-by: Ewan D. Milne emilne@redhat.com Signed-off-by: James Smart jsmart2021@gmail.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/lpfc/lpfc_init.c | 2 +- drivers/scsi/lpfc/lpfc_sli.c | 8 +++++++- 2 files changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c index 7628b0634c57a..ece50201d1724 100644 --- a/drivers/scsi/lpfc/lpfc_init.c +++ b/drivers/scsi/lpfc/lpfc_init.c @@ -2104,7 +2104,7 @@ lpfc_handle_eratt_s4(struct lpfc_hba *phba) } if (reg_err1 == SLIPORT_ERR1_REG_ERR_CODE_2 && reg_err2 == SLIPORT_ERR2_REG_FW_RESTART) { - lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, + lpfc_printf_log(phba, KERN_ERR, LOG_SLI, "3143 Port Down: Firmware Update " "Detected\n"); en_rn_msg = false; diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index 513a78d08b1d5..f404e6bf813cc 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -13365,6 +13365,7 @@ lpfc_sli4_eratt_read(struct lpfc_hba *phba) uint32_t uerr_sta_hi, uerr_sta_lo; uint32_t if_type, portsmphr; struct lpfc_register portstat_reg; + u32 logmask;
/* * For now, use the SLI4 device internal unrecoverable error @@ -13415,7 +13416,12 @@ lpfc_sli4_eratt_read(struct lpfc_hba *phba) readl(phba->sli4_hba.u.if_type2.ERR1regaddr); phba->work_status[1] = readl(phba->sli4_hba.u.if_type2.ERR2regaddr); - lpfc_printf_log(phba, KERN_ERR, LOG_TRACE_EVENT, + logmask = LOG_TRACE_EVENT; + if (phba->work_status[0] == + SLIPORT_ERR1_REG_ERR_CODE_2 && + phba->work_status[1] == SLIPORT_ERR2_REG_FW_RESTART) + logmask = LOG_SLI; + lpfc_printf_log(phba, KERN_ERR, logmask, "2885 Port Status Event: " "port status reg 0x%x, " "port smphr reg 0x%x, "
From: Zoltán Böszörményi zboszor@gmail.com
[ Upstream commit c8ea23d5fa59f28302d4e3370c75d9c308e64410 ]
This device is a CF card, or possibly an SSD in CF form factor. It supports NCQ and high speed DMA.
While it also advertises TRIM support, I/O errors are reported when the discard mount option fstrim is used. TRIM also fails when disabling NCQ and not just as an NCQ command.
TRIM must be disabled for this device.
Signed-off-by: Zoltán Böszörményi zboszor@gmail.com Signed-off-by: Damien Le Moal damien.lemoal@opensource.wdc.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/ata/libata-core.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 94bc5dbb31e1e..63666ee9de175 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4079,6 +4079,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
/* devices that don't properly handle TRIM commands */ { "SuperSSpeed S238*", NULL, ATA_HORKAGE_NOTRIM, }, + { "M88V29*", NULL, ATA_HORKAGE_NOTRIM, },
/* * As defined, the DRAT (Deterministic Read After Trim) and RZAT
From: Jae Hyun Yoo jae.hyun.yoo@linux.intel.com
[ Upstream commit 301a5d3ad2432d7829f59432ca0a93a6defbb9a1 ]
Add a checking code when it gets -EPROBE_DEFER while getting a clock resource. In this case, it doesn't need to print out an error message because the probing will be re-visited.
Signed-off-by: Jae Hyun Yoo jae.hyun.yoo@linux.intel.com Signed-off-by: Joel Stanley joel@jms.id.au Reviewed-by: Andrew Jeffery andrew@aj.id.au Reviewed-by: Iwona Winiarska iwona.winiarska@intel.com Link: https://lore.kernel.org/r/20211104173709.222912-1-jae.hyun.yoo@intel.com Link: https://lore.kernel.org/r/20220201070118.196372-1-joel@jms.id.au' Signed-off-by: Arnd Bergmann arnd@arndb.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/soc/aspeed/aspeed-lpc-ctrl.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/soc/aspeed/aspeed-lpc-ctrl.c b/drivers/soc/aspeed/aspeed-lpc-ctrl.c index 72771e018c42e..258894ed234b3 100644 --- a/drivers/soc/aspeed/aspeed-lpc-ctrl.c +++ b/drivers/soc/aspeed/aspeed-lpc-ctrl.c @@ -306,10 +306,9 @@ static int aspeed_lpc_ctrl_probe(struct platform_device *pdev) }
lpc_ctrl->clk = devm_clk_get(dev, NULL); - if (IS_ERR(lpc_ctrl->clk)) { - dev_err(dev, "couldn't get clock\n"); - return PTR_ERR(lpc_ctrl->clk); - } + if (IS_ERR(lpc_ctrl->clk)) + return dev_err_probe(dev, PTR_ERR(lpc_ctrl->clk), + "couldn't get clock\n"); rc = clk_prepare_enable(lpc_ctrl->clk); if (rc) { dev_err(dev, "couldn't enable clock\n");
From: Dan Aloni dan.aloni@vastdata.com
[ Upstream commit a9c10b5b3b67b3750a10c8b089b2e05f5e176e33 ]
If there are failures then we must not leave the non-NULL pointers with the error value, otherwise `rpcrdma_ep_destroy` gets confused and tries free them, resulting in an Oops.
Signed-off-by: Dan Aloni dan.aloni@vastdata.com Acked-by: Chuck Lever chuck.lever@oracle.com Signed-off-by: Anna Schumaker Anna.Schumaker@Netapp.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/sunrpc/xprtrdma/verbs.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/net/sunrpc/xprtrdma/verbs.c b/net/sunrpc/xprtrdma/verbs.c index 3d3673ba9e1e5..2a2e1514ac79a 100644 --- a/net/sunrpc/xprtrdma/verbs.c +++ b/net/sunrpc/xprtrdma/verbs.c @@ -436,6 +436,7 @@ static int rpcrdma_ep_create(struct rpcrdma_xprt *r_xprt) IB_POLL_WORKQUEUE); if (IS_ERR(ep->re_attr.send_cq)) { rc = PTR_ERR(ep->re_attr.send_cq); + ep->re_attr.send_cq = NULL; goto out_destroy; }
@@ -444,6 +445,7 @@ static int rpcrdma_ep_create(struct rpcrdma_xprt *r_xprt) IB_POLL_WORKQUEUE); if (IS_ERR(ep->re_attr.recv_cq)) { rc = PTR_ERR(ep->re_attr.recv_cq); + ep->re_attr.recv_cq = NULL; goto out_destroy; } ep->re_receive_count = 0; @@ -482,6 +484,7 @@ static int rpcrdma_ep_create(struct rpcrdma_xprt *r_xprt) ep->re_pd = ib_alloc_pd(device, 0); if (IS_ERR(ep->re_pd)) { rc = PTR_ERR(ep->re_pd); + ep->re_pd = NULL; goto out_destroy; }
From: Sascha Hauer s.hauer@pengutronix.de
[ Upstream commit c0cfbb122275da1b726481de5a8cffeb24e6322b ]
The driver returns an error when devm_phy_optional_get() fails leaving the previously enabled clock turned on. Change order and enable the clock only after the phy has been acquired.
Signed-off-by: Sascha Hauer s.hauer@pengutronix.de Signed-off-by: Heiko Stuebner heiko@sntech.de Link: https://patchwork.freedesktop.org/patch/msgid/20220126145549.617165-3-s.haue... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c index 830bdd5e9b7ce..8677c82716784 100644 --- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c +++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c @@ -529,13 +529,6 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master, return ret; }
- ret = clk_prepare_enable(hdmi->vpll_clk); - if (ret) { - DRM_DEV_ERROR(hdmi->dev, "Failed to enable HDMI vpll: %d\n", - ret); - return ret; - } - hdmi->phy = devm_phy_optional_get(dev, "hdmi"); if (IS_ERR(hdmi->phy)) { ret = PTR_ERR(hdmi->phy); @@ -544,6 +537,13 @@ static int dw_hdmi_rockchip_bind(struct device *dev, struct device *master, return ret; }
+ ret = clk_prepare_enable(hdmi->vpll_clk); + if (ret) { + DRM_DEV_ERROR(hdmi->dev, "Failed to enable HDMI vpll: %d\n", + ret); + return ret; + } + drm_encoder_helper_add(encoder, &dw_hdmi_rockchip_encoder_helper_funcs); drm_simple_encoder_init(drm, encoder, DRM_MODE_ENCODER_TMDS);
From: JaeSang Yoo js.yoo.5b@gmail.com
[ Upstream commit 3203ce39ac0b2a57a84382ec184c7d4a0bede175 ]
The kernel parameter "tp_printk_stop_on_boot" starts with "tp_printk" which is the same as another kernel parameter "tp_printk". If "tp_printk" setup is called before the "tp_printk_stop_on_boot", it will override the latter and keep it from being set.
This is similar to other kernel parameter issues, such as: Commit 745a600cf1a6 ("um: console: Ignore console= option") or init/do_mounts.c:45 (setup function of "ro" kernel param)
Fix it by checking for a "_" right after the "tp_printk" and if that exists do not process the parameter.
Link: https://lkml.kernel.org/r/20220208195421.969326-1-jsyoo5b@gmail.com
Signed-off-by: JaeSang Yoo jsyoo5b@gmail.com [ Fixed up change log and added space after if condition ] Signed-off-by: Steven Rostedt (Google) rostedt@goodmis.org Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/trace/trace.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index ae9f9e4af9314..bb15059020445 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -252,6 +252,10 @@ __setup("trace_clock=", set_trace_boot_clock);
static int __init set_tracepoint_printk(char *str) { + /* Ignore the "tp_printk_stop_on_boot" param */ + if (*str == '_') + return 0; + if ((strcmp(str, "=0") != 0 && strcmp(str, "=off") != 0)) tracepoint_printk = 1; return 1;
From: Chuck Lever chuck.lever@oracle.com
[ Upstream commit 6a4d333d540041d244b2fca29b8417bfde20af81 ]
NFSv3 and NFSv4 use u64 offset values on the wire. Record these values verbatim without the implicit type case to loff_t.
Signed-off-by: Chuck Lever chuck.lever@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/nfsd/trace.h | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)
diff --git a/fs/nfsd/trace.h b/fs/nfsd/trace.h index f1e0d3c51bc23..e662494de3c75 100644 --- a/fs/nfsd/trace.h +++ b/fs/nfsd/trace.h @@ -320,14 +320,14 @@ TRACE_EVENT(nfsd_export_update, DECLARE_EVENT_CLASS(nfsd_io_class, TP_PROTO(struct svc_rqst *rqstp, struct svc_fh *fhp, - loff_t offset, - unsigned long len), + u64 offset, + u32 len), TP_ARGS(rqstp, fhp, offset, len), TP_STRUCT__entry( __field(u32, xid) __field(u32, fh_hash) - __field(loff_t, offset) - __field(unsigned long, len) + __field(u64, offset) + __field(u32, len) ), TP_fast_assign( __entry->xid = be32_to_cpu(rqstp->rq_xid); @@ -335,7 +335,7 @@ DECLARE_EVENT_CLASS(nfsd_io_class, __entry->offset = offset; __entry->len = len; ), - TP_printk("xid=0x%08x fh_hash=0x%08x offset=%lld len=%lu", + TP_printk("xid=0x%08x fh_hash=0x%08x offset=%llu len=%u", __entry->xid, __entry->fh_hash, __entry->offset, __entry->len) ) @@ -344,8 +344,8 @@ DECLARE_EVENT_CLASS(nfsd_io_class, DEFINE_EVENT(nfsd_io_class, nfsd_##name, \ TP_PROTO(struct svc_rqst *rqstp, \ struct svc_fh *fhp, \ - loff_t offset, \ - unsigned long len), \ + u64 offset, \ + u32 len), \ TP_ARGS(rqstp, fhp, offset, len))
DEFINE_NFSD_IO_EVENT(read_start);
From: Mario Limonciello mario.limonciello@amd.com
[ Upstream commit 03ad3093c7c069d6ab4403730009ebafeea9ee37 ]
A number of BIOS versions have a problem with the watermarks table not being configured properly. This manifests as a very scary looking warning during resume from s0i3. This should be harmless in most cases and is well understood, so decrease the assertion to a clearer warning about the problem.
Reviewed-by: Harry Wentland harry.wentland@amd.com Signed-off-by: Mario Limonciello mario.limonciello@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/display/dc/clk_mgr/dcn31/dcn31_smu.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn31/dcn31_smu.c b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn31/dcn31_smu.c index 162ae71861247..21d2cbc3cbb20 100644 --- a/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn31/dcn31_smu.c +++ b/drivers/gpu/drm/amd/display/dc/clk_mgr/dcn31/dcn31_smu.c @@ -120,7 +120,11 @@ int dcn31_smu_send_msg_with_param( result = dcn31_smu_wait_for_response(clk_mgr, 10, 200000);
if (result == VBIOSSMC_Result_Failed) { - ASSERT(0); + if (msg_id == VBIOSSMC_MSG_TransferTableDram2Smu && + param == TABLE_WATERMARKS) + DC_LOG_WARNING("Watermarks table not configured properly by SMU"); + else + ASSERT(0); REG_WRITE(MP1_SMN_C2PMSG_91, VBIOSSMC_Result_OK); return -1; }
From: Aaron Liu aaron.liu@amd.com
[ Upstream commit a072312f43c33ea02ad88bff3375f650684a6f24 ]
Confirmed with hardware team, there is harvesting for gc 10.3.1.
Signed-off-by: Aaron Liu aaron.liu@amd.com Reviewed-by: Huang Rui ray.huang@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdgpu/gfxhub_v2_1.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/gfxhub_v2_1.c b/drivers/gpu/drm/amd/amdgpu/gfxhub_v2_1.c index b4eddf6e98a6a..ff738e9725ee8 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfxhub_v2_1.c +++ b/drivers/gpu/drm/amd/amdgpu/gfxhub_v2_1.c @@ -543,7 +543,9 @@ static void gfxhub_v2_1_utcl2_harvest(struct amdgpu_device *adev) adev->gfx.config.max_sh_per_se * adev->gfx.config.max_shader_engines);
- if (adev->ip_versions[GC_HWIP][0] == IP_VERSION(10, 3, 3)) { + switch (adev->ip_versions[GC_HWIP][0]) { + case IP_VERSION(10, 3, 1): + case IP_VERSION(10, 3, 3): /* Get SA disabled bitmap from eFuse setting */ efuse_setting = RREG32_SOC15(GC, 0, mmCC_GC_SA_UNIT_DISABLE); efuse_setting &= CC_GC_SA_UNIT_DISABLE__SA_DISABLE_MASK; @@ -566,6 +568,9 @@ static void gfxhub_v2_1_utcl2_harvest(struct amdgpu_device *adev) disabled_sa = tmp;
WREG32_SOC15(GC, 0, mmGCUTCL2_HARVEST_BYPASS_GROUPS_YELLOW_CARP, disabled_sa); + break; + default: + break; } }
From: Roman Li Roman.Li@amd.com
[ Upstream commit 328e34a5ad227399391891d454043e5d73e598d2 ]
[Why] pflip interrupt order are mapped 1 to 1 to otg id. e.g. if irq_src=26 corresponds to otg0 then 27->otg1, 28->otg2...
Linux DM registers pflip interrupts per number of crtcs. In fused pipe case crtc numbers can be less than otg id.
e.g. if one pipe out of 3(otg#0-2) is fused adev->mode_info.num_crtc=2 so DM only registers irq_src 26,27. This is a bug since if pipe#2 remains unfused DM never gets otg2 pflip interrupt (irq_src=28) That may results in gfx failure due to pflip timeout.
[How] Register pflip interrupts per max num of otg instead of num_crtc
Signed-off-by: Roman Li Roman.Li@amd.com Reviewed-by: Nicholas Kazlauskas nicholas.kazlauskas@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c | 2 +- drivers/gpu/drm/amd/display/dc/core/dc.c | 2 ++ drivers/gpu/drm/amd/display/dc/dc.h | 1 + 3 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c index efcb25ef1809a..0117b00b4ed83 100644 --- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c +++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c @@ -3629,7 +3629,7 @@ static int dcn10_register_irq_handlers(struct amdgpu_device *adev)
/* Use GRPH_PFLIP interrupt */ for (i = DCN_1_0__SRCID__HUBP0_FLIP_INTERRUPT; - i <= DCN_1_0__SRCID__HUBP0_FLIP_INTERRUPT + adev->mode_info.num_crtc - 1; + i <= DCN_1_0__SRCID__HUBP0_FLIP_INTERRUPT + dc->caps.max_otg_num - 1; i++) { r = amdgpu_irq_add_id(adev, SOC15_IH_CLIENTID_DCE, i, &adev->pageflip_irq); if (r) { diff --git a/drivers/gpu/drm/amd/display/dc/core/dc.c b/drivers/gpu/drm/amd/display/dc/core/dc.c index f0fbd8ad56229..e890e063cde31 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc.c @@ -1237,6 +1237,8 @@ struct dc *dc_create(const struct dc_init_data *init_params)
dc->caps.max_dp_protocol_version = DP_VERSION_1_4;
+ dc->caps.max_otg_num = dc->res_pool->res_cap->num_timing_generator; + if (dc->res_pool->dmcu != NULL) dc->versions.dmcu_version = dc->res_pool->dmcu->dmcu_version; } diff --git a/drivers/gpu/drm/amd/display/dc/dc.h b/drivers/gpu/drm/amd/display/dc/dc.h index 618e7989176fc..14864763a1881 100644 --- a/drivers/gpu/drm/amd/display/dc/dc.h +++ b/drivers/gpu/drm/amd/display/dc/dc.h @@ -190,6 +190,7 @@ struct dc_caps { #endif bool vbios_lttpr_aware; bool vbios_lttpr_enable; + uint32_t max_otg_num; };
struct dc_bug_wa {
From: Dmytro Laktyushkin Dmytro.Laktyushkin@amd.com
[ Upstream commit 60fdf98a774eee244a4e00c34a9e7729b61d0f44 ]
Fix clamping to match register field size
Reviewed-by: Charlene Liu Charlene.Liu@amd.com Acked-by: Jasdeep Dhillon jdhillon@amd.com Signed-off-by: Dmytro Laktyushkin Dmytro.Laktyushkin@amd.com Tested-by: Daniel Wheeler daniel.wheeler@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- .../drm/amd/display/dc/dcn31/dcn31_hubbub.c | 61 ++++++++++--------- 1 file changed, 32 insertions(+), 29 deletions(-)
diff --git a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hubbub.c b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hubbub.c index 90c73a1cb9861..5e3bcaf12cac4 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hubbub.c +++ b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hubbub.c @@ -138,8 +138,11 @@ static uint32_t convert_and_clamp( ret_val = wm_ns * refclk_mhz; ret_val /= 1000;
- if (ret_val > clamp_value) + if (ret_val > clamp_value) { + /* clamping WMs is abnormal, unexpected and may lead to underflow*/ + ASSERT(0); ret_val = clamp_value; + }
return ret_val; } @@ -159,7 +162,7 @@ static bool hubbub31_program_urgent_watermarks( if (safe_to_lower || watermarks->a.urgent_ns > hubbub2->watermarks.a.urgent_ns) { hubbub2->watermarks.a.urgent_ns = watermarks->a.urgent_ns; prog_wm_value = convert_and_clamp(watermarks->a.urgent_ns, - refclk_mhz, 0x1fffff); + refclk_mhz, 0x3fff); REG_SET(DCHUBBUB_ARB_DATA_URGENCY_WATERMARK_A, 0, DCHUBBUB_ARB_DATA_URGENCY_WATERMARK_A, prog_wm_value);
@@ -193,7 +196,7 @@ static bool hubbub31_program_urgent_watermarks( if (safe_to_lower || watermarks->a.urgent_latency_ns > hubbub2->watermarks.a.urgent_latency_ns) { hubbub2->watermarks.a.urgent_latency_ns = watermarks->a.urgent_latency_ns; prog_wm_value = convert_and_clamp(watermarks->a.urgent_latency_ns, - refclk_mhz, 0x1fffff); + refclk_mhz, 0x3fff); REG_SET(DCHUBBUB_ARB_REFCYC_PER_TRIP_TO_MEMORY_A, 0, DCHUBBUB_ARB_REFCYC_PER_TRIP_TO_MEMORY_A, prog_wm_value); } else if (watermarks->a.urgent_latency_ns < hubbub2->watermarks.a.urgent_latency_ns) @@ -203,7 +206,7 @@ static bool hubbub31_program_urgent_watermarks( if (safe_to_lower || watermarks->b.urgent_ns > hubbub2->watermarks.b.urgent_ns) { hubbub2->watermarks.b.urgent_ns = watermarks->b.urgent_ns; prog_wm_value = convert_and_clamp(watermarks->b.urgent_ns, - refclk_mhz, 0x1fffff); + refclk_mhz, 0x3fff); REG_SET(DCHUBBUB_ARB_DATA_URGENCY_WATERMARK_B, 0, DCHUBBUB_ARB_DATA_URGENCY_WATERMARK_B, prog_wm_value);
@@ -237,7 +240,7 @@ static bool hubbub31_program_urgent_watermarks( if (safe_to_lower || watermarks->b.urgent_latency_ns > hubbub2->watermarks.b.urgent_latency_ns) { hubbub2->watermarks.b.urgent_latency_ns = watermarks->b.urgent_latency_ns; prog_wm_value = convert_and_clamp(watermarks->b.urgent_latency_ns, - refclk_mhz, 0x1fffff); + refclk_mhz, 0x3fff); REG_SET(DCHUBBUB_ARB_REFCYC_PER_TRIP_TO_MEMORY_B, 0, DCHUBBUB_ARB_REFCYC_PER_TRIP_TO_MEMORY_B, prog_wm_value); } else if (watermarks->b.urgent_latency_ns < hubbub2->watermarks.b.urgent_latency_ns) @@ -247,7 +250,7 @@ static bool hubbub31_program_urgent_watermarks( if (safe_to_lower || watermarks->c.urgent_ns > hubbub2->watermarks.c.urgent_ns) { hubbub2->watermarks.c.urgent_ns = watermarks->c.urgent_ns; prog_wm_value = convert_and_clamp(watermarks->c.urgent_ns, - refclk_mhz, 0x1fffff); + refclk_mhz, 0x3fff); REG_SET(DCHUBBUB_ARB_DATA_URGENCY_WATERMARK_C, 0, DCHUBBUB_ARB_DATA_URGENCY_WATERMARK_C, prog_wm_value);
@@ -281,7 +284,7 @@ static bool hubbub31_program_urgent_watermarks( if (safe_to_lower || watermarks->c.urgent_latency_ns > hubbub2->watermarks.c.urgent_latency_ns) { hubbub2->watermarks.c.urgent_latency_ns = watermarks->c.urgent_latency_ns; prog_wm_value = convert_and_clamp(watermarks->c.urgent_latency_ns, - refclk_mhz, 0x1fffff); + refclk_mhz, 0x3fff); REG_SET(DCHUBBUB_ARB_REFCYC_PER_TRIP_TO_MEMORY_C, 0, DCHUBBUB_ARB_REFCYC_PER_TRIP_TO_MEMORY_C, prog_wm_value); } else if (watermarks->c.urgent_latency_ns < hubbub2->watermarks.c.urgent_latency_ns) @@ -291,7 +294,7 @@ static bool hubbub31_program_urgent_watermarks( if (safe_to_lower || watermarks->d.urgent_ns > hubbub2->watermarks.d.urgent_ns) { hubbub2->watermarks.d.urgent_ns = watermarks->d.urgent_ns; prog_wm_value = convert_and_clamp(watermarks->d.urgent_ns, - refclk_mhz, 0x1fffff); + refclk_mhz, 0x3fff); REG_SET(DCHUBBUB_ARB_DATA_URGENCY_WATERMARK_D, 0, DCHUBBUB_ARB_DATA_URGENCY_WATERMARK_D, prog_wm_value);
@@ -325,7 +328,7 @@ static bool hubbub31_program_urgent_watermarks( if (safe_to_lower || watermarks->d.urgent_latency_ns > hubbub2->watermarks.d.urgent_latency_ns) { hubbub2->watermarks.d.urgent_latency_ns = watermarks->d.urgent_latency_ns; prog_wm_value = convert_and_clamp(watermarks->d.urgent_latency_ns, - refclk_mhz, 0x1fffff); + refclk_mhz, 0x3fff); REG_SET(DCHUBBUB_ARB_REFCYC_PER_TRIP_TO_MEMORY_D, 0, DCHUBBUB_ARB_REFCYC_PER_TRIP_TO_MEMORY_D, prog_wm_value); } else if (watermarks->d.urgent_latency_ns < hubbub2->watermarks.d.urgent_latency_ns) @@ -351,7 +354,7 @@ static bool hubbub31_program_stutter_watermarks( watermarks->a.cstate_pstate.cstate_enter_plus_exit_ns; prog_wm_value = convert_and_clamp( watermarks->a.cstate_pstate.cstate_enter_plus_exit_ns, - refclk_mhz, 0x1fffff); + refclk_mhz, 0xffff); REG_SET(DCHUBBUB_ARB_ALLOW_SR_ENTER_WATERMARK_A, 0, DCHUBBUB_ARB_ALLOW_SR_ENTER_WATERMARK_A, prog_wm_value); DC_LOG_BANDWIDTH_CALCS("SR_ENTER_EXIT_WATERMARK_A calculated =%d\n" @@ -367,7 +370,7 @@ static bool hubbub31_program_stutter_watermarks( watermarks->a.cstate_pstate.cstate_exit_ns; prog_wm_value = convert_and_clamp( watermarks->a.cstate_pstate.cstate_exit_ns, - refclk_mhz, 0x1fffff); + refclk_mhz, 0xffff); REG_SET(DCHUBBUB_ARB_ALLOW_SR_EXIT_WATERMARK_A, 0, DCHUBBUB_ARB_ALLOW_SR_EXIT_WATERMARK_A, prog_wm_value); DC_LOG_BANDWIDTH_CALCS("SR_EXIT_WATERMARK_A calculated =%d\n" @@ -383,7 +386,7 @@ static bool hubbub31_program_stutter_watermarks( watermarks->a.cstate_pstate.cstate_enter_plus_exit_z8_ns; prog_wm_value = convert_and_clamp( watermarks->a.cstate_pstate.cstate_enter_plus_exit_z8_ns, - refclk_mhz, 0x1fffff); + refclk_mhz, 0xffff); REG_SET(DCHUBBUB_ARB_ALLOW_SR_ENTER_WATERMARK_Z8_A, 0, DCHUBBUB_ARB_ALLOW_SR_ENTER_WATERMARK_Z8_A, prog_wm_value); DC_LOG_BANDWIDTH_CALCS("SR_ENTER_WATERMARK_Z8_A calculated =%d\n" @@ -399,7 +402,7 @@ static bool hubbub31_program_stutter_watermarks( watermarks->a.cstate_pstate.cstate_exit_z8_ns; prog_wm_value = convert_and_clamp( watermarks->a.cstate_pstate.cstate_exit_z8_ns, - refclk_mhz, 0x1fffff); + refclk_mhz, 0xffff); REG_SET(DCHUBBUB_ARB_ALLOW_SR_EXIT_WATERMARK_Z8_A, 0, DCHUBBUB_ARB_ALLOW_SR_EXIT_WATERMARK_Z8_A, prog_wm_value); DC_LOG_BANDWIDTH_CALCS("SR_EXIT_WATERMARK_Z8_A calculated =%d\n" @@ -416,7 +419,7 @@ static bool hubbub31_program_stutter_watermarks( watermarks->b.cstate_pstate.cstate_enter_plus_exit_ns; prog_wm_value = convert_and_clamp( watermarks->b.cstate_pstate.cstate_enter_plus_exit_ns, - refclk_mhz, 0x1fffff); + refclk_mhz, 0xffff); REG_SET(DCHUBBUB_ARB_ALLOW_SR_ENTER_WATERMARK_B, 0, DCHUBBUB_ARB_ALLOW_SR_ENTER_WATERMARK_B, prog_wm_value); DC_LOG_BANDWIDTH_CALCS("SR_ENTER_EXIT_WATERMARK_B calculated =%d\n" @@ -432,7 +435,7 @@ static bool hubbub31_program_stutter_watermarks( watermarks->b.cstate_pstate.cstate_exit_ns; prog_wm_value = convert_and_clamp( watermarks->b.cstate_pstate.cstate_exit_ns, - refclk_mhz, 0x1fffff); + refclk_mhz, 0xffff); REG_SET(DCHUBBUB_ARB_ALLOW_SR_EXIT_WATERMARK_B, 0, DCHUBBUB_ARB_ALLOW_SR_EXIT_WATERMARK_B, prog_wm_value); DC_LOG_BANDWIDTH_CALCS("SR_EXIT_WATERMARK_B calculated =%d\n" @@ -448,7 +451,7 @@ static bool hubbub31_program_stutter_watermarks( watermarks->b.cstate_pstate.cstate_enter_plus_exit_z8_ns; prog_wm_value = convert_and_clamp( watermarks->b.cstate_pstate.cstate_enter_plus_exit_z8_ns, - refclk_mhz, 0x1fffff); + refclk_mhz, 0xffff); REG_SET(DCHUBBUB_ARB_ALLOW_SR_ENTER_WATERMARK_Z8_B, 0, DCHUBBUB_ARB_ALLOW_SR_ENTER_WATERMARK_Z8_B, prog_wm_value); DC_LOG_BANDWIDTH_CALCS("SR_ENTER_WATERMARK_Z8_B calculated =%d\n" @@ -464,7 +467,7 @@ static bool hubbub31_program_stutter_watermarks( watermarks->b.cstate_pstate.cstate_exit_z8_ns; prog_wm_value = convert_and_clamp( watermarks->b.cstate_pstate.cstate_exit_z8_ns, - refclk_mhz, 0x1fffff); + refclk_mhz, 0xffff); REG_SET(DCHUBBUB_ARB_ALLOW_SR_EXIT_WATERMARK_Z8_B, 0, DCHUBBUB_ARB_ALLOW_SR_EXIT_WATERMARK_Z8_B, prog_wm_value); DC_LOG_BANDWIDTH_CALCS("SR_EXIT_WATERMARK_Z8_B calculated =%d\n" @@ -481,7 +484,7 @@ static bool hubbub31_program_stutter_watermarks( watermarks->c.cstate_pstate.cstate_enter_plus_exit_ns; prog_wm_value = convert_and_clamp( watermarks->c.cstate_pstate.cstate_enter_plus_exit_ns, - refclk_mhz, 0x1fffff); + refclk_mhz, 0xffff); REG_SET(DCHUBBUB_ARB_ALLOW_SR_ENTER_WATERMARK_C, 0, DCHUBBUB_ARB_ALLOW_SR_ENTER_WATERMARK_C, prog_wm_value); DC_LOG_BANDWIDTH_CALCS("SR_ENTER_EXIT_WATERMARK_C calculated =%d\n" @@ -497,7 +500,7 @@ static bool hubbub31_program_stutter_watermarks( watermarks->c.cstate_pstate.cstate_exit_ns; prog_wm_value = convert_and_clamp( watermarks->c.cstate_pstate.cstate_exit_ns, - refclk_mhz, 0x1fffff); + refclk_mhz, 0xffff); REG_SET(DCHUBBUB_ARB_ALLOW_SR_EXIT_WATERMARK_C, 0, DCHUBBUB_ARB_ALLOW_SR_EXIT_WATERMARK_C, prog_wm_value); DC_LOG_BANDWIDTH_CALCS("SR_EXIT_WATERMARK_C calculated =%d\n" @@ -513,7 +516,7 @@ static bool hubbub31_program_stutter_watermarks( watermarks->c.cstate_pstate.cstate_enter_plus_exit_z8_ns; prog_wm_value = convert_and_clamp( watermarks->c.cstate_pstate.cstate_enter_plus_exit_z8_ns, - refclk_mhz, 0x1fffff); + refclk_mhz, 0xffff); REG_SET(DCHUBBUB_ARB_ALLOW_SR_ENTER_WATERMARK_Z8_C, 0, DCHUBBUB_ARB_ALLOW_SR_ENTER_WATERMARK_Z8_C, prog_wm_value); DC_LOG_BANDWIDTH_CALCS("SR_ENTER_WATERMARK_Z8_C calculated =%d\n" @@ -529,7 +532,7 @@ static bool hubbub31_program_stutter_watermarks( watermarks->c.cstate_pstate.cstate_exit_z8_ns; prog_wm_value = convert_and_clamp( watermarks->c.cstate_pstate.cstate_exit_z8_ns, - refclk_mhz, 0x1fffff); + refclk_mhz, 0xffff); REG_SET(DCHUBBUB_ARB_ALLOW_SR_EXIT_WATERMARK_Z8_C, 0, DCHUBBUB_ARB_ALLOW_SR_EXIT_WATERMARK_Z8_C, prog_wm_value); DC_LOG_BANDWIDTH_CALCS("SR_EXIT_WATERMARK_Z8_C calculated =%d\n" @@ -546,7 +549,7 @@ static bool hubbub31_program_stutter_watermarks( watermarks->d.cstate_pstate.cstate_enter_plus_exit_ns; prog_wm_value = convert_and_clamp( watermarks->d.cstate_pstate.cstate_enter_plus_exit_ns, - refclk_mhz, 0x1fffff); + refclk_mhz, 0xffff); REG_SET(DCHUBBUB_ARB_ALLOW_SR_ENTER_WATERMARK_D, 0, DCHUBBUB_ARB_ALLOW_SR_ENTER_WATERMARK_D, prog_wm_value); DC_LOG_BANDWIDTH_CALCS("SR_ENTER_EXIT_WATERMARK_D calculated =%d\n" @@ -562,7 +565,7 @@ static bool hubbub31_program_stutter_watermarks( watermarks->d.cstate_pstate.cstate_exit_ns; prog_wm_value = convert_and_clamp( watermarks->d.cstate_pstate.cstate_exit_ns, - refclk_mhz, 0x1fffff); + refclk_mhz, 0xffff); REG_SET(DCHUBBUB_ARB_ALLOW_SR_EXIT_WATERMARK_D, 0, DCHUBBUB_ARB_ALLOW_SR_EXIT_WATERMARK_D, prog_wm_value); DC_LOG_BANDWIDTH_CALCS("SR_EXIT_WATERMARK_D calculated =%d\n" @@ -578,7 +581,7 @@ static bool hubbub31_program_stutter_watermarks( watermarks->d.cstate_pstate.cstate_enter_plus_exit_z8_ns; prog_wm_value = convert_and_clamp( watermarks->d.cstate_pstate.cstate_enter_plus_exit_z8_ns, - refclk_mhz, 0x1fffff); + refclk_mhz, 0xffff); REG_SET(DCHUBBUB_ARB_ALLOW_SR_ENTER_WATERMARK_Z8_D, 0, DCHUBBUB_ARB_ALLOW_SR_ENTER_WATERMARK_Z8_D, prog_wm_value); DC_LOG_BANDWIDTH_CALCS("SR_ENTER_WATERMARK_Z8_D calculated =%d\n" @@ -594,7 +597,7 @@ static bool hubbub31_program_stutter_watermarks( watermarks->d.cstate_pstate.cstate_exit_z8_ns; prog_wm_value = convert_and_clamp( watermarks->d.cstate_pstate.cstate_exit_z8_ns, - refclk_mhz, 0x1fffff); + refclk_mhz, 0xffff); REG_SET(DCHUBBUB_ARB_ALLOW_SR_EXIT_WATERMARK_Z8_D, 0, DCHUBBUB_ARB_ALLOW_SR_EXIT_WATERMARK_Z8_D, prog_wm_value); DC_LOG_BANDWIDTH_CALCS("SR_EXIT_WATERMARK_Z8_D calculated =%d\n" @@ -625,7 +628,7 @@ static bool hubbub31_program_pstate_watermarks( watermarks->a.cstate_pstate.pstate_change_ns; prog_wm_value = convert_and_clamp( watermarks->a.cstate_pstate.pstate_change_ns, - refclk_mhz, 0x1fffff); + refclk_mhz, 0xffff); REG_SET(DCHUBBUB_ARB_ALLOW_DRAM_CLK_CHANGE_WATERMARK_A, 0, DCHUBBUB_ARB_ALLOW_DRAM_CLK_CHANGE_WATERMARK_A, prog_wm_value); DC_LOG_BANDWIDTH_CALCS("DRAM_CLK_CHANGE_WATERMARK_A calculated =%d\n" @@ -642,7 +645,7 @@ static bool hubbub31_program_pstate_watermarks( watermarks->b.cstate_pstate.pstate_change_ns; prog_wm_value = convert_and_clamp( watermarks->b.cstate_pstate.pstate_change_ns, - refclk_mhz, 0x1fffff); + refclk_mhz, 0xffff); REG_SET(DCHUBBUB_ARB_ALLOW_DRAM_CLK_CHANGE_WATERMARK_B, 0, DCHUBBUB_ARB_ALLOW_DRAM_CLK_CHANGE_WATERMARK_B, prog_wm_value); DC_LOG_BANDWIDTH_CALCS("DRAM_CLK_CHANGE_WATERMARK_B calculated =%d\n" @@ -659,7 +662,7 @@ static bool hubbub31_program_pstate_watermarks( watermarks->c.cstate_pstate.pstate_change_ns; prog_wm_value = convert_and_clamp( watermarks->c.cstate_pstate.pstate_change_ns, - refclk_mhz, 0x1fffff); + refclk_mhz, 0xffff); REG_SET(DCHUBBUB_ARB_ALLOW_DRAM_CLK_CHANGE_WATERMARK_C, 0, DCHUBBUB_ARB_ALLOW_DRAM_CLK_CHANGE_WATERMARK_C, prog_wm_value); DC_LOG_BANDWIDTH_CALCS("DRAM_CLK_CHANGE_WATERMARK_C calculated =%d\n" @@ -676,7 +679,7 @@ static bool hubbub31_program_pstate_watermarks( watermarks->d.cstate_pstate.pstate_change_ns; prog_wm_value = convert_and_clamp( watermarks->d.cstate_pstate.pstate_change_ns, - refclk_mhz, 0x1fffff); + refclk_mhz, 0xffff); REG_SET(DCHUBBUB_ARB_ALLOW_DRAM_CLK_CHANGE_WATERMARK_D, 0, DCHUBBUB_ARB_ALLOW_DRAM_CLK_CHANGE_WATERMARK_D, prog_wm_value); DC_LOG_BANDWIDTH_CALCS("DRAM_CLK_CHANGE_WATERMARK_D calculated =%d\n"
From: Slark Xiao slark_xiao@163.com
[ Upstream commit 8ecbb179286cbc91810c16caeb3396e06305cd0c ]
Dell DW5829e same as DW5821e except the CAT level. DW5821e supports CAT16 but DW5829e supports CAT9. Also, DW5829e includes normal and eSIM type. Please see below test evidence:
T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 5 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=413c ProdID=81e6 Rev=03.18 S: Manufacturer=Dell Inc. S: Product=DW5829e Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
T: Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 7 Spd=5000 MxCh= 0 D: Ver= 3.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS= 9 #Cfgs= 1 P: Vendor=413c ProdID=81e4 Rev=03.18 S: Manufacturer=Dell Inc. S: Product=DW5829e-eSIM Snapdragon X20 LTE S: SerialNumber=0123456789ABCDEF C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=896mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=usbhid I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option
Signed-off-by: Slark Xiao slark_xiao@163.com Acked-by: Bjørn Mork bjorn@mork.no Link: https://lore.kernel.org/r/20220209024717.8564-1-slark_xiao@163.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/usb/qmi_wwan.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index f510e82194705..2f2abc42cecea 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -1399,6 +1399,8 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x413c, 0x81d7, 0)}, /* Dell Wireless 5821e */ {QMI_FIXED_INTF(0x413c, 0x81d7, 1)}, /* Dell Wireless 5821e preproduction config */ {QMI_FIXED_INTF(0x413c, 0x81e0, 0)}, /* Dell Wireless 5821e with eSIM support*/ + {QMI_FIXED_INTF(0x413c, 0x81e4, 0)}, /* Dell Wireless 5829e with eSIM support*/ + {QMI_FIXED_INTF(0x413c, 0x81e6, 0)}, /* Dell Wireless 5829e */ {QMI_FIXED_INTF(0x03f0, 0x4e1d, 8)}, /* HP lt4111 LTE/EV-DO/HSPA+ Gobi 4G Module */ {QMI_FIXED_INTF(0x03f0, 0x9d1d, 1)}, /* HP lt4120 Snapdragon X5 LTE */ {QMI_FIXED_INTF(0x22de, 0x9061, 3)}, /* WeTelecom WPD-600N */
From: Marc St-Amand mstamand@ciena.com
[ Upstream commit 37f7860602b5b2d99fc7465f6407f403f5941988 ]
Single page and coherent memory blocks can use different DMA masks when the macb accesses physical memory directly. The kernel is clever enough to allocate pages that fit into the requested address width.
When using the ARM SMMU, the DMA mask must be the same for single pages and big coherent memory blocks. Otherwise the translation tables turn into one big mess.
[ 74.959909] macb ff0e0000.ethernet eth0: DMA bus error: HRESP not OK [ 74.959989] arm-smmu fd800000.smmu: Unhandled context fault: fsr=0x402, iova=0x3165687460, fsynr=0x20001, cbfrsynra=0x877, cb=1 [ 75.173939] macb ff0e0000.ethernet eth0: DMA bus error: HRESP not OK [ 75.173955] arm-smmu fd800000.smmu: Unhandled context fault: fsr=0x402, iova=0x3165687460, fsynr=0x20001, cbfrsynra=0x877, cb=1
Since using the same DMA mask does not hurt direct 1:1 physical memory mappings, this commit always aligns DMA and coherent masks.
Signed-off-by: Marc St-Amand mstamand@ciena.com Signed-off-by: Harini Katakam harini.katakam@xilinx.com Acked-by: Nicolas Ferre nicolas.ferre@microchip.com Tested-by: Conor Dooley conor.dooley@microchip.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/cadence/macb_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c index ffce528aa00e4..aac1b27bfc7bf 100644 --- a/drivers/net/ethernet/cadence/macb_main.c +++ b/drivers/net/ethernet/cadence/macb_main.c @@ -4749,7 +4749,7 @@ static int macb_probe(struct platform_device *pdev)
#ifdef CONFIG_ARCH_DMA_ADDR_T_64BIT if (GEM_BFEXT(DAW64, gem_readl(bp, DCFG6))) { - dma_set_mask(&pdev->dev, DMA_BIT_MASK(44)); + dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(44)); bp->hw_dma_cap |= HW_DMA_CAP_64B; } #endif
From: Jing Leng jleng@ambarella.com
[ Upstream commit 1b9e740a81f91ae338b29ed70455719804957b80 ]
When the KCONFIG_AUTOCONFIG is specified (e.g. export \ KCONFIG_AUTOCONFIG=output/config/auto.conf), the directory of include/config/ will not be created, so kconfig can't create deps files in it and auto.conf can't be generated.
Signed-off-by: Jing Leng jleng@ambarella.com Signed-off-by: Masahiro Yamada masahiroy@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- scripts/kconfig/confdata.c | 13 +++++++++---- 1 file changed, 9 insertions(+), 4 deletions(-)
diff --git a/scripts/kconfig/confdata.c b/scripts/kconfig/confdata.c index 42bc56ee238c8..8954e28a225cb 100644 --- a/scripts/kconfig/confdata.c +++ b/scripts/kconfig/confdata.c @@ -992,14 +992,19 @@ static int conf_write_autoconf_cmd(const char *autoconf_name)
static int conf_touch_deps(void) { - const char *name; + const char *name, *tmp; struct symbol *sym; int res, i;
- strcpy(depfile_path, "include/config/"); - depfile_prefix_len = strlen(depfile_path); - name = conf_get_autoconfig_name(); + tmp = strrchr(name, '/'); + depfile_prefix_len = tmp ? tmp - name + 1 : 0; + if (depfile_prefix_len + 1 > sizeof(depfile_path)) + return -1; + + strncpy(depfile_path, name, depfile_prefix_len); + depfile_path[depfile_prefix_len] = 0; + conf_read_simple(name, S_DEF_AUTO); sym_calc_value(modules_sym);
linux-stable-mirror@lists.linaro.org
-
Greg Kroah-Hartman -
Sasha Levin