[PATCH AUTOSEL 5.15 1/4] i3c: mipi-i3c-hci: Fix out of bounds access in hci_dma_irq_handler
From: Jarkko Nikula jarkko.nikula@linux.intel.com
[ Upstream commit 45a832f989e520095429589d5b01b0c65da9b574 ]
Do not loop over ring headers in hci_dma_irq_handler() that are not allocated and enabled in hci_dma_init(). Otherwise out of bounds access will occur from rings->headers[i] access when i >= number of allocated ring headers.
Signed-off-by: Jarkko Nikula jarkko.nikula@linux.intel.com Link: https://lore.kernel.org/r/20230921055704.1087277-5-jarkko.nikula@linux.intel... Signed-off-by: Alexandre Belloni alexandre.belloni@bootlin.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/i3c/master/mipi-i3c-hci/dma.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/i3c/master/mipi-i3c-hci/dma.c b/drivers/i3c/master/mipi-i3c-hci/dma.c index af873a9be0507..dd2dc00399600 100644 --- a/drivers/i3c/master/mipi-i3c-hci/dma.c +++ b/drivers/i3c/master/mipi-i3c-hci/dma.c @@ -734,7 +734,7 @@ static bool hci_dma_irq_handler(struct i3c_hci *hci, unsigned int mask) unsigned int i; bool handled = false;
- for (i = 0; mask && i < 8; i++) { + for (i = 0; mask && i < rings->total; i++) { struct hci_rh_data *rh; u32 status;
From: Axel Lin axel.lin@ingics.com
[ Upstream commit 5ac61d26b8baff5b2e5a9f3dc1ef63297e4b53e7 ]
Make sure we don't OOPS in case clock-frequency is set to 0 in a DT. The variable set here is later used as a divisor.
Signed-off-by: Axel Lin axel.lin@ingics.com Acked-by: Boris Brezillon boris.brezillon@free-electrons.com Signed-off-by: Wolfram Sang wsa@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/i2c/busses/i2c-sun6i-p2wi.c | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/drivers/i2c/busses/i2c-sun6i-p2wi.c b/drivers/i2c/busses/i2c-sun6i-p2wi.c index 9e3483f507ff5..f2ed13b551088 100644 --- a/drivers/i2c/busses/i2c-sun6i-p2wi.c +++ b/drivers/i2c/busses/i2c-sun6i-p2wi.c @@ -201,6 +201,11 @@ static int p2wi_probe(struct platform_device *pdev) return -EINVAL; }
+ if (clk_freq == 0) { + dev_err(dev, "clock-frequency is set to 0 in DT\n"); + return -EINVAL; + } + if (of_get_child_count(np) > 1) { dev_err(dev, "P2WI only supports one slave device\n"); return -EINVAL;
From: zhenwei pi pizhenwei@bytedance.com
[ Upstream commit fafb51a67fb883eb2dde352539df939a251851be ]
The following codes have an implicit conversion from size_t to u32: (u32)max_size = (size_t)virtio_max_dma_size(vdev);
This may lead overflow, Ex (size_t)4G -> (u32)0. Once virtio_max_dma_size() has a larger size than U32_MAX, use U32_MAX instead.
Signed-off-by: zhenwei pi pizhenwei@bytedance.com Message-Id: 20230904061045.510460-1-pizhenwei@bytedance.com Signed-off-by: Michael S. Tsirkin mst@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/block/virtio_blk.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c index d2ba849bb8d19..affeca0dbc7ea 100644 --- a/drivers/block/virtio_blk.c +++ b/drivers/block/virtio_blk.c @@ -743,6 +743,7 @@ static int virtblk_probe(struct virtio_device *vdev) u16 min_io_size; u8 physical_block_exp, alignment_offset; unsigned int queue_depth; + size_t max_dma_size;
if (!vdev->config->get) { dev_err(&vdev->dev, "%s failure: config access disabled\n", @@ -844,7 +845,8 @@ static int virtblk_probe(struct virtio_device *vdev) /* No real sector limit. */ blk_queue_max_hw_sectors(q, -1U);
- max_size = virtio_max_dma_size(vdev); + max_dma_size = virtio_max_dma_size(vdev); + max_size = max_dma_size > U32_MAX ? U32_MAX : max_dma_size;
/* Host can optionally specify maximum segment size and number of * segments. */
From: Billy Tsai billy_tsai@aspeedtech.com
[ Upstream commit b53e9758a31c683fc8615df930262192ed5f034b ]
The `i3c_master_bus_init` function may attach the I2C devices before the I3C bus initialization. In this flow, the DAT `alloc_entry`` will be used before the DAT `init`. Additionally, if the `i3c_master_bus_init` fails, the DAT `cleanup` will execute before the device is detached, which will execue DAT `free_entry` function. The above scenario can cause the driver to use DAT_data when it is NULL.
Signed-off-by: Billy Tsai billy_tsai@aspeedtech.com Link: https://lore.kernel.org/r/20231023080237.560936-1-billy_tsai@aspeedtech.com Signed-off-by: Alexandre Belloni alexandre.belloni@bootlin.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/i3c/master/mipi-i3c-hci/dat_v1.c | 29 ++++++++++++++++-------- 1 file changed, 19 insertions(+), 10 deletions(-)
diff --git a/drivers/i3c/master/mipi-i3c-hci/dat_v1.c b/drivers/i3c/master/mipi-i3c-hci/dat_v1.c index 97bb49ff5b53b..47b9b4d4ed3fc 100644 --- a/drivers/i3c/master/mipi-i3c-hci/dat_v1.c +++ b/drivers/i3c/master/mipi-i3c-hci/dat_v1.c @@ -64,15 +64,17 @@ static int hci_dat_v1_init(struct i3c_hci *hci) return -EOPNOTSUPP; }
- /* use a bitmap for faster free slot search */ - hci->DAT_data = bitmap_zalloc(hci->DAT_entries, GFP_KERNEL); - if (!hci->DAT_data) - return -ENOMEM; - - /* clear them */ - for (dat_idx = 0; dat_idx < hci->DAT_entries; dat_idx++) { - dat_w0_write(dat_idx, 0); - dat_w1_write(dat_idx, 0); + if (!hci->DAT_data) { + /* use a bitmap for faster free slot search */ + hci->DAT_data = bitmap_zalloc(hci->DAT_entries, GFP_KERNEL); + if (!hci->DAT_data) + return -ENOMEM; + + /* clear them */ + for (dat_idx = 0; dat_idx < hci->DAT_entries; dat_idx++) { + dat_w0_write(dat_idx, 0); + dat_w1_write(dat_idx, 0); + } }
return 0; @@ -87,7 +89,13 @@ static void hci_dat_v1_cleanup(struct i3c_hci *hci) static int hci_dat_v1_alloc_entry(struct i3c_hci *hci) { unsigned int dat_idx; + int ret;
+ if (!hci->DAT_data) { + ret = hci_dat_v1_init(hci); + if (ret) + return ret; + } dat_idx = find_first_zero_bit(hci->DAT_data, hci->DAT_entries); if (dat_idx >= hci->DAT_entries) return -ENOENT; @@ -103,7 +111,8 @@ static void hci_dat_v1_free_entry(struct i3c_hci *hci, unsigned int dat_idx) { dat_w0_write(dat_idx, 0); dat_w1_write(dat_idx, 0); - __clear_bit(dat_idx, hci->DAT_data); + if (hci->DAT_data) + __clear_bit(dat_idx, hci->DAT_data); }
static void hci_dat_v1_set_dynamic_addr(struct i3c_hci *hci,
linux-stable-mirror@lists.linaro.org
-
Sasha Levin