Changes in v2: - arm64: dts: qcom: x1e80100: Fix ADSP...: Commit msg corrections, second paragraph (Johan) - Add tags - Link to v1: https://lore.kernel.org/r/20241206-dts-qcom-cdsp-mpss-base-address-v1-0-2f34...
Konrad pointed out during SM8750 review, that numbers are odd, so I looked at datasheets and downstream DTS for all previous platforms.
Most numbers are odd.
Older platforms like SM8150, SM8250, SC7280, SC8180X seem fine. I could not check few like SDX75 or SM6115, due to lack of access to datasheets.
SM8350, SM8450, SM8550 tested on hardware. Others not, but I don't expect any failures because PAS drivers do not use the address space. Which also explains why odd numbers did not result in any failures.
Best regards, Krzysztof
--- Krzysztof Kozlowski (19): arm64: dts: qcom: sm8350: Fix ADSP memory base and length arm64: dts: qcom: sm8350: Fix CDSP memory base and length arm64: dts: qcom: sm8350: Fix MPSS memory length arm64: dts: qcom: sm8450: Fix ADSP memory base and length arm64: dts: qcom: sm8450: Fix CDSP memory length arm64: dts: qcom: sm8450: Fix MPSS memory length arm64: dts: qcom: sm8550: Fix ADSP memory base and length arm64: dts: qcom: sm8550: Fix CDSP memory length arm64: dts: qcom: sm8550: Fix MPSS memory length [RFT] arm64: dts: qcom: sm8650: Fix ADSP memory base and length [RFT] arm64: dts: qcom: sm8650: Fix CDSP memory length [RFT] arm64: dts: qcom: sm8650: Fix MPSS memory length arm64: dts: qcom: x1e80100: Fix ADSP memory base and length arm64: dts: qcom: x1e80100: Fix CDSP memory length arm64: dts: qcom: sm6350: Fix ADSP memory length arm64: dts: qcom: sm6350: Fix MPSS memory length [RFT] arm64: dts: qcom: sm6375: Fix ADSP memory length [RFT] arm64: dts: qcom: sm6375: Fix CDSP memory base and length [RFT] arm64: dts: qcom: sm6375: Fix MPSS memory base and length
arch/arm64/boot/dts/qcom/sm6350.dtsi | 4 +- arch/arm64/boot/dts/qcom/sm6375.dtsi | 10 +- arch/arm64/boot/dts/qcom/sm8350.dtsi | 492 ++++++++++++++++----------------- arch/arm64/boot/dts/qcom/sm8450.dtsi | 216 +++++++-------- arch/arm64/boot/dts/qcom/sm8550.dtsi | 266 +++++++++--------- arch/arm64/boot/dts/qcom/sm8650.dtsi | 300 ++++++++++---------- arch/arm64/boot/dts/qcom/x1e80100.dtsi | 276 +++++++++--------- 7 files changed, 782 insertions(+), 782 deletions(-) --- base-commit: c245a7a79602ccbee780c004c1e4abcda66aec32 change-id: 20241206-dts-qcom-cdsp-mpss-base-address-ae7c406ac9ac
Best regards,
The address space in ADSP PAS (Peripheral Authentication Service) remoteproc node should point to the QDSP PUB address space (QDSP6...SS_PUB): 0x0300_0000 with length of 0x10000. 0x1730_0000, value used so far, was copied from downstream DTS, is in the middle of unused space and downstream DTS describes the PIL loader, which is a bit different interface.
Assume existing value (thus downstream DTS) is not really describing the intended ADSP PAS region.
Correct the base address and length, which also moves the node to different place to keep things sorted by unit address. The diff looks big, but only the unit address and "reg" property were changed. This should have no functional impact on Linux users, because PAS loader does not use this address space at all.
Fixes: 177fcf0aeda2 ("arm64: dts: qcom: sm8350: Add remoteprocs") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/sm8350.dtsi | 272 +++++++++++++++++------------------ 1 file changed, 136 insertions(+), 136 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index 877905dfd861edbcd083e6691a7cfa1279164ffc..5fae676af3a3da21066d01092b6b24fbc4ae4a40 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -1876,6 +1876,142 @@ tcsr: syscon@1fc0000 { reg = <0x0 0x1fc0000 0x0 0x30000>; };
+ adsp: remoteproc@3000000 { + compatible = "qcom,sm8350-adsp-pas"; + reg = <0x0 0x03000000 0x0 0x10000>; + + interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd RPMHPD_LCX>, + <&rpmhpd RPMHPD_LMX>; + power-domain-names = "lcx", "lmx"; + + memory-region = <&pil_adsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "lpass"; + qcom,remote-pid = <2>; + + apr { + compatible = "qcom,apr-v2"; + qcom,glink-channels = "apr_audio_svc"; + qcom,domain = <APR_DOMAIN_ADSP>; + #address-cells = <1>; + #size-cells = <0>; + + service@3 { + reg = <APR_SVC_ADSP_CORE>; + compatible = "qcom,q6core"; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + }; + + q6afe: service@4 { + compatible = "qcom,q6afe"; + reg = <APR_SVC_AFE>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + + q6afedai: dais { + compatible = "qcom,q6afe-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + }; + + q6afecc: clock-controller { + compatible = "qcom,q6afe-clocks"; + #clock-cells = <2>; + }; + }; + + q6asm: service@7 { + compatible = "qcom,q6asm"; + reg = <APR_SVC_ASM>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + + q6asmdai: dais { + compatible = "qcom,q6asm-dais"; + #address-cells = <1>; + #size-cells = <0>; + #sound-dai-cells = <1>; + iommus = <&apps_smmu 0x1801 0x0>; + + dai@0 { + reg = <0>; + }; + + dai@1 { + reg = <1>; + }; + + dai@2 { + reg = <2>; + }; + }; + }; + + q6adm: service@8 { + compatible = "qcom,q6adm"; + reg = <APR_SVC_ADM>; + qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; + + q6routing: routing { + compatible = "qcom,q6adm-routing"; + #sound-dai-cells = <0>; + }; + }; + }; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "adsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1803 0x0>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1804 0x0>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x1805 0x0>; + }; + }; + }; + }; + lpass_tlmm: pinctrl@33c0000 { compatible = "qcom,sm8350-lpass-lpi-pinctrl"; reg = <0 0x033c0000 0 0x20000>, @@ -3285,142 +3421,6 @@ apps_smmu: iommu@15000000 { dma-coherent; };
- adsp: remoteproc@17300000 { - compatible = "qcom,sm8350-adsp-pas"; - reg = <0 0x17300000 0 0x100>; - - interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, - <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, - <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, - <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, - <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", - "handover", "stop-ack"; - - clocks = <&rpmhcc RPMH_CXO_CLK>; - clock-names = "xo"; - - power-domains = <&rpmhpd RPMHPD_LCX>, - <&rpmhpd RPMHPD_LMX>; - power-domain-names = "lcx", "lmx"; - - memory-region = <&pil_adsp_mem>; - - qcom,qmp = <&aoss_qmp>; - - qcom,smem-states = <&smp2p_adsp_out 0>; - qcom,smem-state-names = "stop"; - - status = "disabled"; - - glink-edge { - interrupts-extended = <&ipcc IPCC_CLIENT_LPASS - IPCC_MPROC_SIGNAL_GLINK_QMP - IRQ_TYPE_EDGE_RISING>; - mboxes = <&ipcc IPCC_CLIENT_LPASS - IPCC_MPROC_SIGNAL_GLINK_QMP>; - - label = "lpass"; - qcom,remote-pid = <2>; - - apr { - compatible = "qcom,apr-v2"; - qcom,glink-channels = "apr_audio_svc"; - qcom,domain = <APR_DOMAIN_ADSP>; - #address-cells = <1>; - #size-cells = <0>; - - service@3 { - reg = <APR_SVC_ADSP_CORE>; - compatible = "qcom,q6core"; - qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; - }; - - q6afe: service@4 { - compatible = "qcom,q6afe"; - reg = <APR_SVC_AFE>; - qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; - - q6afedai: dais { - compatible = "qcom,q6afe-dais"; - #address-cells = <1>; - #size-cells = <0>; - #sound-dai-cells = <1>; - }; - - q6afecc: clock-controller { - compatible = "qcom,q6afe-clocks"; - #clock-cells = <2>; - }; - }; - - q6asm: service@7 { - compatible = "qcom,q6asm"; - reg = <APR_SVC_ASM>; - qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; - - q6asmdai: dais { - compatible = "qcom,q6asm-dais"; - #address-cells = <1>; - #size-cells = <0>; - #sound-dai-cells = <1>; - iommus = <&apps_smmu 0x1801 0x0>; - - dai@0 { - reg = <0>; - }; - - dai@1 { - reg = <1>; - }; - - dai@2 { - reg = <2>; - }; - }; - }; - - q6adm: service@8 { - compatible = "qcom,q6adm"; - reg = <APR_SVC_ADM>; - qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd"; - - q6routing: routing { - compatible = "qcom,q6adm-routing"; - #sound-dai-cells = <0>; - }; - }; - }; - - fastrpc { - compatible = "qcom,fastrpc"; - qcom,glink-channels = "fastrpcglink-apps-dsp"; - label = "adsp"; - qcom,non-secure-domain; - #address-cells = <1>; - #size-cells = <0>; - - compute-cb@3 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <3>; - iommus = <&apps_smmu 0x1803 0x0>; - }; - - compute-cb@4 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <4>; - iommus = <&apps_smmu 0x1804 0x0>; - }; - - compute-cb@5 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <5>; - iommus = <&apps_smmu 0x1805 0x0>; - }; - }; - }; - }; - intc: interrupt-controller@17a00000 { compatible = "arm,gic-v3"; #interrupt-cells = <3>;
On 9.12.2024 12:02 PM, Krzysztof Kozlowski wrote:
The address space in ADSP PAS (Peripheral Authentication Service) remoteproc node should point to the QDSP PUB address space (QDSP6...SS_PUB): 0x0300_0000 with length of 0x10000. 0x1730_0000, value used so far, was copied from downstream DTS, is in the middle of unused space and downstream DTS describes the PIL loader, which is a bit different interface.
Assume existing value (thus downstream DTS) is not really describing the intended ADSP PAS region.
Correct the base address and length, which also moves the node to different place to keep things sorted by unit address. The diff looks big, but only the unit address and "reg" property were changed. This should have no functional impact on Linux users, because PAS loader does not use this address space at all.
Fixes: 177fcf0aeda2 ("arm64: dts: qcom: sm8350: Add remoteprocs") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org
Reviewed-by: Konrad Dybcio konrad.dybcio@oss.qualcomm.com
Konrad
The address space in CDSP PAS (Peripheral Authentication Service) remoteproc node should point to the QDSP PUB address space (QDSP6...SS_PUB): 0x0a30_0000 with length of 0x10000. 0x9890_0000, value used so far, was copied from downstream DTS, is in the middle of RAM/DDR space and downstream DTS describes the PIL loader, which is a bit different interface. Datasheet says that one of the main CDSP address spaces is 0x0980_0000, which is oddly similar to 0x9890_0000, but quite different.
Assume existing value (thus downstream DTS) is not really describing the intended CDSP PAS region.
Correct the base address and length, which also moves the node to different place to keep things sorted by unit address. The diff looks big, but only the unit address and "reg" property were changed. This should have no functional impact on Linux users, because PAS loader does not use this address space at all.
Fixes: 177fcf0aeda2 ("arm64: dts: qcom: sm8350: Add remoteprocs") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/sm8350.dtsi | 218 +++++++++++++++++------------------ 1 file changed, 109 insertions(+), 109 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index 5fae676af3a3da21066d01092b6b24fbc4ae4a40..2a62405c0c9eff959abc4cee57753a8b1545c9bf 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -2496,6 +2496,115 @@ compute_noc: interconnect@a0c0000 { qcom,bcm-voters = <&apps_bcm_voter>; };
+ cdsp: remoteproc@a300000 { + compatible = "qcom,sm8350-cdsp-pas"; + reg = <0x0 0x0a300000 0x0 0x10000>; + + interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd RPMHPD_CX>, + <&rpmhpd RPMHPD_MXC>; + power-domain-names = "cx", "mxc"; + + interconnects = <&compute_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>; + + memory-region = <&pil_cdsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_cdsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_CDSP + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "cdsp"; + qcom,remote-pid = <5>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "cdsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x2161 0x0400>, + <&apps_smmu 0x1181 0x0420>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x2162 0x0400>, + <&apps_smmu 0x1182 0x0420>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x2163 0x0400>, + <&apps_smmu 0x1183 0x0420>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x2164 0x0400>, + <&apps_smmu 0x1184 0x0420>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x2165 0x0400>, + <&apps_smmu 0x1185 0x0420>; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x2166 0x0400>, + <&apps_smmu 0x1186 0x0420>; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x2167 0x0400>, + <&apps_smmu 0x1187 0x0420>; + }; + + compute-cb@8 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <8>; + iommus = <&apps_smmu 0x2168 0x0400>, + <&apps_smmu 0x1188 0x0420>; + }; + + /* note: secure cb9 in downstream */ + }; + }; + }; + usb_1: usb@a6f8800 { compatible = "qcom,sm8350-dwc3", "qcom,dwc3"; reg = <0 0x0a6f8800 0 0x400>; @@ -3589,115 +3698,6 @@ cpufreq_hw: cpufreq@18591000 { #freq-domain-cells = <1>; #clock-cells = <1>; }; - - cdsp: remoteproc@98900000 { - compatible = "qcom,sm8350-cdsp-pas"; - reg = <0 0x98900000 0 0x1400000>; - - interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, - <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>, - <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>, - <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>, - <&smp2p_cdsp_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", - "handover", "stop-ack"; - - clocks = <&rpmhcc RPMH_CXO_CLK>; - clock-names = "xo"; - - power-domains = <&rpmhpd RPMHPD_CX>, - <&rpmhpd RPMHPD_MXC>; - power-domain-names = "cx", "mxc"; - - interconnects = <&compute_noc MASTER_CDSP_PROC 0 &mc_virt SLAVE_EBI1 0>; - - memory-region = <&pil_cdsp_mem>; - - qcom,qmp = <&aoss_qmp>; - - qcom,smem-states = <&smp2p_cdsp_out 0>; - qcom,smem-state-names = "stop"; - - status = "disabled"; - - glink-edge { - interrupts-extended = <&ipcc IPCC_CLIENT_CDSP - IPCC_MPROC_SIGNAL_GLINK_QMP - IRQ_TYPE_EDGE_RISING>; - mboxes = <&ipcc IPCC_CLIENT_CDSP - IPCC_MPROC_SIGNAL_GLINK_QMP>; - - label = "cdsp"; - qcom,remote-pid = <5>; - - fastrpc { - compatible = "qcom,fastrpc"; - qcom,glink-channels = "fastrpcglink-apps-dsp"; - label = "cdsp"; - qcom,non-secure-domain; - #address-cells = <1>; - #size-cells = <0>; - - compute-cb@1 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <1>; - iommus = <&apps_smmu 0x2161 0x0400>, - <&apps_smmu 0x1181 0x0420>; - }; - - compute-cb@2 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <2>; - iommus = <&apps_smmu 0x2162 0x0400>, - <&apps_smmu 0x1182 0x0420>; - }; - - compute-cb@3 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <3>; - iommus = <&apps_smmu 0x2163 0x0400>, - <&apps_smmu 0x1183 0x0420>; - }; - - compute-cb@4 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <4>; - iommus = <&apps_smmu 0x2164 0x0400>, - <&apps_smmu 0x1184 0x0420>; - }; - - compute-cb@5 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <5>; - iommus = <&apps_smmu 0x2165 0x0400>, - <&apps_smmu 0x1185 0x0420>; - }; - - compute-cb@6 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <6>; - iommus = <&apps_smmu 0x2166 0x0400>, - <&apps_smmu 0x1186 0x0420>; - }; - - compute-cb@7 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <7>; - iommus = <&apps_smmu 0x2167 0x0400>, - <&apps_smmu 0x1187 0x0420>; - }; - - compute-cb@8 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <8>; - iommus = <&apps_smmu 0x2168 0x0400>, - <&apps_smmu 0x1188 0x0420>; - }; - - /* note: secure cb9 in downstream */ - }; - }; - }; };
thermal_zones: thermal-zones {
On 9.12.2024 12:02 PM, Krzysztof Kozlowski wrote:
The address space in CDSP PAS (Peripheral Authentication Service) remoteproc node should point to the QDSP PUB address space (QDSP6...SS_PUB): 0x0a30_0000 with length of 0x10000. 0x9890_0000, value used so far, was copied from downstream DTS, is in the middle of RAM/DDR space and downstream DTS describes the PIL loader, which is a bit different interface. Datasheet says that one of the main CDSP address spaces is 0x0980_0000, which is oddly similar to 0x9890_0000, but quite different.
Assume existing value (thus downstream DTS) is not really describing the intended CDSP PAS region.
Correct the base address and length, which also moves the node to different place to keep things sorted by unit address. The diff looks big, but only the unit address and "reg" property were changed. This should have no functional impact on Linux users, because PAS loader does not use this address space at all.
Fixes: 177fcf0aeda2 ("arm64: dts: qcom: sm8350: Add remoteprocs") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org
Reviewed-by: Konrad Dybcio konrad.dybcio@oss.qualcomm.com
Konrad
The address space in MPSS/Modem PAS (Peripheral Authentication Service) remoteproc node should point to the QDSP PUB address space (QDSP6...SS_PUB) which has a length of 0x10000. Value of 0x4040 was copied from older DTS, but it grew since then.
This should have no functional impact on Linux users, because PAS loader does not use this address space at all.
Fixes: 177fcf0aeda2 ("arm64: dts: qcom: sm8350: Add remoteprocs") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/sm8350.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi index 2a62405c0c9eff959abc4cee57753a8b1545c9bf..7d77dc528eb734a86be5f194b120b6d926f150c6 100644 --- a/arch/arm64/boot/dts/qcom/sm8350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi @@ -2214,7 +2214,7 @@ lpass_ag_noc: interconnect@3c40000 {
mpss: remoteproc@4080000 { compatible = "qcom,sm8350-mpss-pas"; - reg = <0x0 0x04080000 0x0 0x4040>; + reg = <0x0 0x04080000 0x0 0x10000>;
interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>, <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
On 9.12.2024 12:02 PM, Krzysztof Kozlowski wrote:
The address space in MPSS/Modem PAS (Peripheral Authentication Service) remoteproc node should point to the QDSP PUB address space (QDSP6...SS_PUB) which has a length of 0x10000. Value of 0x4040 was copied from older DTS, but it grew since then.
This should have no functional impact on Linux users, because PAS loader does not use this address space at all.
Fixes: 177fcf0aeda2 ("arm64: dts: qcom: sm8350: Add remoteprocs") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org
Reviewed-by: Konrad Dybcio konrad.dybcio@oss.qualcomm.com
Konrad
The address space in ADSP PAS (Peripheral Authentication Service) remoteproc node should point to the QDSP PUB address space (QDSP6...SS_PUB): 0x0300_0000 with length of 0x10000, which also matches downstream DTS. 0x3000_0000, value used so far, was in datasheet is the region of CDSP.
Correct the base address and length, which also moves the node to different place to keep things sorted by unit address. The diff looks big, but only the unit address and "reg" property were changed. This should have no functional impact on Linux users, because PAS loader does not use this address space at all.
Fixes: 1172729576fb ("arm64: dts: qcom: sm8450: Add remoteproc enablers and instances") Cc: stable@vger.kernel.org Reviewed-by: Neil Armstrong neil.armstrong@linaro.org Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/sm8450.dtsi | 212 +++++++++++++++++------------------ 1 file changed, 106 insertions(+), 106 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index 53147aa6f7e4acb102dd5dee51f0aec164b971c7..d028079c11bdc2dd2b254f7f7d85e315a86f79bc 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -2496,6 +2496,112 @@ compute-cb@3 { }; };
+ remoteproc_adsp: remoteproc@3000000 { + compatible = "qcom,sm8450-adsp-pas"; + reg = <0x0 0x03000000 0x0 0x10000>; + + interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd RPMHPD_LCX>, + <&rpmhpd RPMHPD_LMX>; + power-domain-names = "lcx", "lmx"; + + memory-region = <&adsp_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + remoteproc_adsp_glink: glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "lpass"; + qcom,remote-pid = <2>; + + gpr { + compatible = "qcom,gpr"; + qcom,glink-channels = "adsp_apps"; + qcom,domain = <GPR_DOMAIN_ID_ADSP>; + qcom,intents = <512 20>; + #address-cells = <1>; + #size-cells = <0>; + + q6apm: service@1 { + compatible = "qcom,q6apm"; + reg = <GPR_APM_MODULE_IID>; + #sound-dai-cells = <0>; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + + q6apmdai: dais { + compatible = "qcom,q6apm-dais"; + iommus = <&apps_smmu 0x1801 0x0>; + }; + + q6apmbedai: bedais { + compatible = "qcom,q6apm-lpass-dais"; + #sound-dai-cells = <1>; + }; + }; + + q6prm: service@2 { + compatible = "qcom,q6prm"; + reg = <GPR_PRM_MODULE_IID>; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + + q6prmcc: clock-controller { + compatible = "qcom,q6prm-lpass-clocks"; + #clock-cells = <2>; + }; + }; + }; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "adsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1803 0x0>; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1804 0x0>; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x1805 0x0>; + }; + }; + }; + }; + wsa2macro: codec@31e0000 { compatible = "qcom,sm8450-lpass-wsa-macro"; reg = <0 0x031e0000 0 0x1000>; @@ -2692,112 +2798,6 @@ vamacro: codec@33f0000 { status = "disabled"; };
- remoteproc_adsp: remoteproc@30000000 { - compatible = "qcom,sm8450-adsp-pas"; - reg = <0 0x30000000 0 0x100>; - - interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, - <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, - <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, - <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, - <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", - "handover", "stop-ack"; - - clocks = <&rpmhcc RPMH_CXO_CLK>; - clock-names = "xo"; - - power-domains = <&rpmhpd RPMHPD_LCX>, - <&rpmhpd RPMHPD_LMX>; - power-domain-names = "lcx", "lmx"; - - memory-region = <&adsp_mem>; - - qcom,qmp = <&aoss_qmp>; - - qcom,smem-states = <&smp2p_adsp_out 0>; - qcom,smem-state-names = "stop"; - - status = "disabled"; - - remoteproc_adsp_glink: glink-edge { - interrupts-extended = <&ipcc IPCC_CLIENT_LPASS - IPCC_MPROC_SIGNAL_GLINK_QMP - IRQ_TYPE_EDGE_RISING>; - mboxes = <&ipcc IPCC_CLIENT_LPASS - IPCC_MPROC_SIGNAL_GLINK_QMP>; - - label = "lpass"; - qcom,remote-pid = <2>; - - gpr { - compatible = "qcom,gpr"; - qcom,glink-channels = "adsp_apps"; - qcom,domain = <GPR_DOMAIN_ID_ADSP>; - qcom,intents = <512 20>; - #address-cells = <1>; - #size-cells = <0>; - - q6apm: service@1 { - compatible = "qcom,q6apm"; - reg = <GPR_APM_MODULE_IID>; - #sound-dai-cells = <0>; - qcom,protection-domain = "avs/audio", - "msm/adsp/audio_pd"; - - q6apmdai: dais { - compatible = "qcom,q6apm-dais"; - iommus = <&apps_smmu 0x1801 0x0>; - }; - - q6apmbedai: bedais { - compatible = "qcom,q6apm-lpass-dais"; - #sound-dai-cells = <1>; - }; - }; - - q6prm: service@2 { - compatible = "qcom,q6prm"; - reg = <GPR_PRM_MODULE_IID>; - qcom,protection-domain = "avs/audio", - "msm/adsp/audio_pd"; - - q6prmcc: clock-controller { - compatible = "qcom,q6prm-lpass-clocks"; - #clock-cells = <2>; - }; - }; - }; - - fastrpc { - compatible = "qcom,fastrpc"; - qcom,glink-channels = "fastrpcglink-apps-dsp"; - label = "adsp"; - qcom,non-secure-domain; - #address-cells = <1>; - #size-cells = <0>; - - compute-cb@3 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <3>; - iommus = <&apps_smmu 0x1803 0x0>; - }; - - compute-cb@4 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <4>; - iommus = <&apps_smmu 0x1804 0x0>; - }; - - compute-cb@5 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <5>; - iommus = <&apps_smmu 0x1805 0x0>; - }; - }; - }; - }; - remoteproc_cdsp: remoteproc@32300000 { compatible = "qcom,sm8450-cdsp-pas"; reg = <0 0x32300000 0 0x1400000>;
The address space in CDSP PAS (Peripheral Authentication Service) remoteproc node should point to the QDSP PUB address space (QDSP6...SS_PUB) which has a length of 0x10000. Value of 0x1400000 was copied from older DTS, but it does not look accurate at all.
This should have no functional impact on Linux users, because PAS loader does not use this address space at all.
Fixes: 1172729576fb ("arm64: dts: qcom: sm8450: Add remoteproc enablers and instances") Cc: stable@vger.kernel.org Reviewed-by: Neil Armstrong neil.armstrong@linaro.org Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/sm8450.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index d028079c11bdc2dd2b254f7f7d85e315a86f79bc..7a3bf847b0b9eae2094b0a8f48f6900a31b28ae4 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -2800,7 +2800,7 @@ vamacro: codec@33f0000 {
remoteproc_cdsp: remoteproc@32300000 { compatible = "qcom,sm8450-cdsp-pas"; - reg = <0 0x32300000 0 0x1400000>; + reg = <0 0x32300000 0 0x10000>;
interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
The address space in MPSS/Modem PAS (Peripheral Authentication Service) remoteproc node should point to the QDSP PUB address space (QDSP6...SS_PUB) which has a length of 0x10000. Value of 0x4040 was copied from older DTS, but it grew since then.
This should have no functional impact on Linux users, because PAS loader does not use this address space at all.
Fixes: 1172729576fb ("arm64: dts: qcom: sm8450: Add remoteproc enablers and instances") Cc: stable@vger.kernel.org Reviewed-by: Neil Armstrong neil.armstrong@linaro.org Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/sm8450.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi index 7a3bf847b0b9eae2094b0a8f48f6900a31b28ae4..6df110f3ec21dd8efe0bf5e93621b2cabb77fd17 100644 --- a/arch/arm64/boot/dts/qcom/sm8450.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi @@ -2907,7 +2907,7 @@ compute-cb@8 {
remoteproc_mpss: remoteproc@4080000 { compatible = "qcom,sm8450-mpss-pas"; - reg = <0x0 0x04080000 0x0 0x4040>; + reg = <0x0 0x04080000 0x0 0x10000>;
interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>, <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
The address space in ADSP PAS (Peripheral Authentication Service) remoteproc node should point to the QDSP PUB address space (QDSP6...SS_PUB): 0x0680_0000 with length of 0x10000.
0x3000_0000, value used so far, is the main region of CDSP. Downstream DTS uses 0x0300_0000, which is oddly similar to 0x3000_0000, yet quite different and points to unused area.
Correct the base address and length, which also moves the node to different place to keep things sorted by unit address. The diff looks big, but only the unit address and "reg" property were changed. This should have no functional impact on Linux users, because PAS loader does not use this address space at all.
Fixes: d0c061e366ed ("arm64: dts: qcom: sm8550: add adsp, cdsp & mdss nodes") Cc: stable@vger.kernel.org Reviewed-by: Neil Armstrong neil.armstrong@linaro.org Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/sm8550.dtsi | 262 +++++++++++++++++------------------ 1 file changed, 131 insertions(+), 131 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi index e7774d32fb6d2288748ecec00bf525b2b3c40fbb..f454015c5b90c7d792c01bf85256812857d79c64 100644 --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi @@ -2354,6 +2354,137 @@ IPCC_MPROC_SIGNAL_GLINK_QMP }; };
+ remoteproc_adsp: remoteproc@6800000 { + compatible = "qcom,sm8550-adsp-pas"; + reg = <0x0 0x06800000 0x0 0x10000>; + + interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", "fatal", "ready", + "handover", "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd RPMHPD_LCX>, + <&rpmhpd RPMHPD_LMX>; + power-domain-names = "lcx", "lmx"; + + interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC 0 &mc_virt SLAVE_EBI1 0>; + + memory-region = <&adspslpi_mem>, <&q6_adsp_dtb_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + remoteproc_adsp_glink: glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "lpass"; + qcom,remote-pid = <2>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "adsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1003 0x80>, + <&apps_smmu 0x1063 0x0>; + dma-coherent; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1004 0x80>, + <&apps_smmu 0x1064 0x0>; + dma-coherent; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x1005 0x80>, + <&apps_smmu 0x1065 0x0>; + dma-coherent; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x1006 0x80>, + <&apps_smmu 0x1066 0x0>; + dma-coherent; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x1007 0x80>, + <&apps_smmu 0x1067 0x0>; + dma-coherent; + }; + }; + + gpr { + compatible = "qcom,gpr"; + qcom,glink-channels = "adsp_apps"; + qcom,domain = <GPR_DOMAIN_ID_ADSP>; + qcom,intents = <512 20>; + #address-cells = <1>; + #size-cells = <0>; + + q6apm: service@1 { + compatible = "qcom,q6apm"; + reg = <GPR_APM_MODULE_IID>; + #sound-dai-cells = <0>; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + + q6apmdai: dais { + compatible = "qcom,q6apm-dais"; + iommus = <&apps_smmu 0x1001 0x80>, + <&apps_smmu 0x1061 0x0>; + }; + + q6apmbedai: bedais { + compatible = "qcom,q6apm-lpass-dais"; + #sound-dai-cells = <1>; + }; + }; + + q6prm: service@2 { + compatible = "qcom,q6prm"; + reg = <GPR_PRM_MODULE_IID>; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + + q6prmcc: clock-controller { + compatible = "qcom,q6prm-lpass-clocks"; + #clock-cells = <2>; + }; + }; + }; + }; + }; + lpass_wsa2macro: codec@6aa0000 { compatible = "qcom,sm8550-lpass-wsa-macro"; reg = <0 0x06aa0000 0 0x1000>; @@ -4576,137 +4707,6 @@ system-cache-controller@25000000 { interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; };
- remoteproc_adsp: remoteproc@30000000 { - compatible = "qcom,sm8550-adsp-pas"; - reg = <0x0 0x30000000 0x0 0x100>; - - interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, - <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, - <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, - <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, - <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", "fatal", "ready", - "handover", "stop-ack"; - - clocks = <&rpmhcc RPMH_CXO_CLK>; - clock-names = "xo"; - - power-domains = <&rpmhpd RPMHPD_LCX>, - <&rpmhpd RPMHPD_LMX>; - power-domain-names = "lcx", "lmx"; - - interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC 0 &mc_virt SLAVE_EBI1 0>; - - memory-region = <&adspslpi_mem>, <&q6_adsp_dtb_mem>; - - qcom,qmp = <&aoss_qmp>; - - qcom,smem-states = <&smp2p_adsp_out 0>; - qcom,smem-state-names = "stop"; - - status = "disabled"; - - remoteproc_adsp_glink: glink-edge { - interrupts-extended = <&ipcc IPCC_CLIENT_LPASS - IPCC_MPROC_SIGNAL_GLINK_QMP - IRQ_TYPE_EDGE_RISING>; - mboxes = <&ipcc IPCC_CLIENT_LPASS - IPCC_MPROC_SIGNAL_GLINK_QMP>; - - label = "lpass"; - qcom,remote-pid = <2>; - - fastrpc { - compatible = "qcom,fastrpc"; - qcom,glink-channels = "fastrpcglink-apps-dsp"; - label = "adsp"; - qcom,non-secure-domain; - #address-cells = <1>; - #size-cells = <0>; - - compute-cb@3 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <3>; - iommus = <&apps_smmu 0x1003 0x80>, - <&apps_smmu 0x1063 0x0>; - dma-coherent; - }; - - compute-cb@4 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <4>; - iommus = <&apps_smmu 0x1004 0x80>, - <&apps_smmu 0x1064 0x0>; - dma-coherent; - }; - - compute-cb@5 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <5>; - iommus = <&apps_smmu 0x1005 0x80>, - <&apps_smmu 0x1065 0x0>; - dma-coherent; - }; - - compute-cb@6 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <6>; - iommus = <&apps_smmu 0x1006 0x80>, - <&apps_smmu 0x1066 0x0>; - dma-coherent; - }; - - compute-cb@7 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <7>; - iommus = <&apps_smmu 0x1007 0x80>, - <&apps_smmu 0x1067 0x0>; - dma-coherent; - }; - }; - - gpr { - compatible = "qcom,gpr"; - qcom,glink-channels = "adsp_apps"; - qcom,domain = <GPR_DOMAIN_ID_ADSP>; - qcom,intents = <512 20>; - #address-cells = <1>; - #size-cells = <0>; - - q6apm: service@1 { - compatible = "qcom,q6apm"; - reg = <GPR_APM_MODULE_IID>; - #sound-dai-cells = <0>; - qcom,protection-domain = "avs/audio", - "msm/adsp/audio_pd"; - - q6apmdai: dais { - compatible = "qcom,q6apm-dais"; - iommus = <&apps_smmu 0x1001 0x80>, - <&apps_smmu 0x1061 0x0>; - }; - - q6apmbedai: bedais { - compatible = "qcom,q6apm-lpass-dais"; - #sound-dai-cells = <1>; - }; - }; - - q6prm: service@2 { - compatible = "qcom,q6prm"; - reg = <GPR_PRM_MODULE_IID>; - qcom,protection-domain = "avs/audio", - "msm/adsp/audio_pd"; - - q6prmcc: clock-controller { - compatible = "qcom,q6prm-lpass-clocks"; - #clock-cells = <2>; - }; - }; - }; - }; - }; - nsp_noc: interconnect@320c0000 { compatible = "qcom,sm8550-nsp-noc"; reg = <0 0x320c0000 0 0xe080>;
On 9.12.2024 12:02 PM, Krzysztof Kozlowski wrote:
The address space in ADSP PAS (Peripheral Authentication Service) remoteproc node should point to the QDSP PUB address space (QDSP6...SS_PUB): 0x0680_0000 with length of 0x10000.
0x3000_0000, value used so far, is the main region of CDSP. Downstream DTS uses 0x0300_0000, which is oddly similar to 0x3000_0000, yet quite different and points to unused area.
Correct the base address and length, which also moves the node to different place to keep things sorted by unit address. The diff looks big, but only the unit address and "reg" property were changed. This should have no functional impact on Linux users, because PAS loader does not use this address space at all.
Fixes: d0c061e366ed ("arm64: dts: qcom: sm8550: add adsp, cdsp & mdss nodes") Cc: stable@vger.kernel.org Reviewed-by: Neil Armstrong neil.armstrong@linaro.org Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org
Reviewed-by: Konrad Dybcio konrad.dybcio@oss.qualcomm.com
Konrad
The address space in CDSP PAS (Peripheral Authentication Service) remoteproc node should point to the QDSP PUB address space (QDSP6...SS_PUB) which has a length of 0x10000. Value of 0x1400000 was copied from older DTS, but it does not look accurate at all.
This should have no functional impact on Linux users, because PAS loader does not use this address space at all.
Fixes: d0c061e366ed ("arm64: dts: qcom: sm8550: add adsp, cdsp & mdss nodes") Cc: stable@vger.kernel.org Reviewed-by: Neil Armstrong neil.armstrong@linaro.org Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/sm8550.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi index f454015c5b90c7d792c01bf85256812857d79c64..541b88eb5f5300ef9e20220305ff638db9b2e46b 100644 --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi @@ -4716,7 +4716,7 @@ nsp_noc: interconnect@320c0000 {
remoteproc_cdsp: remoteproc@32300000 { compatible = "qcom,sm8550-cdsp-pas"; - reg = <0x0 0x32300000 0x0 0x1400000>; + reg = <0x0 0x32300000 0x0 0x10000>;
interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
On 9.12.2024 12:02 PM, Krzysztof Kozlowski wrote:
The address space in CDSP PAS (Peripheral Authentication Service) remoteproc node should point to the QDSP PUB address space (QDSP6...SS_PUB) which has a length of 0x10000. Value of 0x1400000 was copied from older DTS, but it does not look accurate at all.
This should have no functional impact on Linux users, because PAS loader does not use this address space at all.
Fixes: d0c061e366ed ("arm64: dts: qcom: sm8550: add adsp, cdsp & mdss nodes") Cc: stable@vger.kernel.org Reviewed-by: Neil Armstrong neil.armstrong@linaro.org Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org
Reviewed-by: Konrad Dybcio konrad.dybcio@oss.qualcomm.com
Konrad
The address space in MPSS/Modem PAS (Peripheral Authentication Service) remoteproc node should point to the QDSP PUB address space (QDSP6...SS_PUB) which has a length of 0x10000. Value of 0x4040 was copied from older DTS, but it grew since then.
This should have no functional impact on Linux users, because PAS loader does not use this address space at all.
Fixes: d0c061e366ed ("arm64: dts: qcom: sm8550: add adsp, cdsp & mdss nodes") Cc: stable@vger.kernel.org Reviewed-by: Neil Armstrong neil.armstrong@linaro.org Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/sm8550.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi index 541b88eb5f5300ef9e20220305ff638db9b2e46b..71ff15695d396a68720a785435e692d3bbb38888 100644 --- a/arch/arm64/boot/dts/qcom/sm8550.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi @@ -2314,7 +2314,7 @@ ipa: ipa@3f40000 {
remoteproc_mpss: remoteproc@4080000 { compatible = "qcom,sm8550-mpss-pas"; - reg = <0x0 0x04080000 0x0 0x4040>; + reg = <0x0 0x04080000 0x0 0x10000>;
interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>, <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
On 9.12.2024 12:02 PM, Krzysztof Kozlowski wrote:
The address space in MPSS/Modem PAS (Peripheral Authentication Service) remoteproc node should point to the QDSP PUB address space (QDSP6...SS_PUB) which has a length of 0x10000. Value of 0x4040 was copied from older DTS, but it grew since then.
This should have no functional impact on Linux users, because PAS loader does not use this address space at all.
Fixes: d0c061e366ed ("arm64: dts: qcom: sm8550: add adsp, cdsp & mdss nodes") Cc: stable@vger.kernel.org Reviewed-by: Neil Armstrong neil.armstrong@linaro.org Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org
Reviewed-by: Konrad Dybcio konrad.dybcio@oss.qualcomm.com
Konrad
The address space in ADSP PAS (Peripheral Authentication Service) remoteproc node should point to the QDSP PUB address space (QDSP6...SS_PUB): 0x0680_0000 with length of 0x10000.
0x3000_0000, value used so far, is the main region of CDSP. Downstream DTS uses 0x0300_0000, which is oddly similar to 0x3000_0000, yet quite different and points to unused area.
Correct the base address and length, which also moves the node to different place to keep things sorted by unit address. The diff looks big, but only the unit address and "reg" property were changed. This should have no functional impact on Linux users, because PAS loader does not use this address space at all.
Fixes: 10e024671295 ("arm64: dts: qcom: sm8650: add interconnect dependent device nodes") Cc: stable@vger.kernel.org Reviewed-by: Neil Armstrong neil.armstrong@linaro.org Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/sm8650.dtsi | 296 +++++++++++++++++------------------ 1 file changed, 148 insertions(+), 148 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi index 25e47505adcb790d09f1d2726386438487255824..95ec82bce3162bce4a3da6122a41fee37118740e 100644 --- a/arch/arm64/boot/dts/qcom/sm8650.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi @@ -2904,6 +2904,154 @@ IPCC_MPROC_SIGNAL_GLINK_QMP }; };
+ remoteproc_adsp: remoteproc@6800000 { + compatible = "qcom,sm8650-adsp-pas"; + reg = <0x0 0x06800000 0x0 0x10000>; + + interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + + power-domains = <&rpmhpd RPMHPD_LCX>, + <&rpmhpd RPMHPD_LMX>; + power-domain-names = "lcx", + "lmx"; + + memory-region = <&adspslpi_mem>, <&q6_adsp_dtb_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + remoteproc_adsp_glink: glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + qcom,remote-pid = <2>; + + label = "lpass"; + + fastrpc { + compatible = "qcom,fastrpc"; + + qcom,glink-channels = "fastrpcglink-apps-dsp"; + + label = "adsp"; + + qcom,non-secure-domain; + + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + + iommus = <&apps_smmu 0x1003 0x80>, + <&apps_smmu 0x1043 0x20>; + dma-coherent; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + + iommus = <&apps_smmu 0x1004 0x80>, + <&apps_smmu 0x1044 0x20>; + dma-coherent; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + + iommus = <&apps_smmu 0x1005 0x80>, + <&apps_smmu 0x1045 0x20>; + dma-coherent; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + + iommus = <&apps_smmu 0x1006 0x80>, + <&apps_smmu 0x1046 0x20>; + dma-coherent; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + + iommus = <&apps_smmu 0x1007 0x40>, + <&apps_smmu 0x1067 0x0>, + <&apps_smmu 0x1087 0x0>; + dma-coherent; + }; + }; + + gpr { + compatible = "qcom,gpr"; + qcom,glink-channels = "adsp_apps"; + qcom,domain = <GPR_DOMAIN_ID_ADSP>; + qcom,intents = <512 20>; + #address-cells = <1>; + #size-cells = <0>; + + q6apm: service@1 { + compatible = "qcom,q6apm"; + reg = <GPR_APM_MODULE_IID>; + #sound-dai-cells = <0>; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + + q6apmbedai: bedais { + compatible = "qcom,q6apm-lpass-dais"; + #sound-dai-cells = <1>; + }; + + q6apmdai: dais { + compatible = "qcom,q6apm-dais"; + iommus = <&apps_smmu 0x1001 0x80>, + <&apps_smmu 0x1061 0x0>; + }; + }; + + q6prm: service@2 { + compatible = "qcom,q6prm"; + reg = <GPR_PRM_MODULE_IID>; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + + q6prmcc: clock-controller { + compatible = "qcom,q6prm-lpass-clocks"; + #clock-cells = <2>; + }; + }; + }; + }; + }; + lpass_wsa2macro: codec@6aa0000 { compatible = "qcom,sm8650-lpass-wsa-macro", "qcom,sm8550-lpass-wsa-macro"; reg = <0 0x06aa0000 0 0x1000>; @@ -5322,154 +5470,6 @@ system-cache-controller@25000000 { interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; };
- remoteproc_adsp: remoteproc@30000000 { - compatible = "qcom,sm8650-adsp-pas"; - reg = <0 0x30000000 0 0x100>; - - interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, - <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, - <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, - <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, - <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", - "fatal", - "ready", - "handover", - "stop-ack"; - - clocks = <&rpmhcc RPMH_CXO_CLK>; - clock-names = "xo"; - - interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - - power-domains = <&rpmhpd RPMHPD_LCX>, - <&rpmhpd RPMHPD_LMX>; - power-domain-names = "lcx", - "lmx"; - - memory-region = <&adspslpi_mem>, <&q6_adsp_dtb_mem>; - - qcom,qmp = <&aoss_qmp>; - - qcom,smem-states = <&smp2p_adsp_out 0>; - qcom,smem-state-names = "stop"; - - status = "disabled"; - - remoteproc_adsp_glink: glink-edge { - interrupts-extended = <&ipcc IPCC_CLIENT_LPASS - IPCC_MPROC_SIGNAL_GLINK_QMP - IRQ_TYPE_EDGE_RISING>; - - mboxes = <&ipcc IPCC_CLIENT_LPASS - IPCC_MPROC_SIGNAL_GLINK_QMP>; - - qcom,remote-pid = <2>; - - label = "lpass"; - - fastrpc { - compatible = "qcom,fastrpc"; - - qcom,glink-channels = "fastrpcglink-apps-dsp"; - - label = "adsp"; - - qcom,non-secure-domain; - - #address-cells = <1>; - #size-cells = <0>; - - compute-cb@3 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <3>; - - iommus = <&apps_smmu 0x1003 0x80>, - <&apps_smmu 0x1043 0x20>; - dma-coherent; - }; - - compute-cb@4 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <4>; - - iommus = <&apps_smmu 0x1004 0x80>, - <&apps_smmu 0x1044 0x20>; - dma-coherent; - }; - - compute-cb@5 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <5>; - - iommus = <&apps_smmu 0x1005 0x80>, - <&apps_smmu 0x1045 0x20>; - dma-coherent; - }; - - compute-cb@6 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <6>; - - iommus = <&apps_smmu 0x1006 0x80>, - <&apps_smmu 0x1046 0x20>; - dma-coherent; - }; - - compute-cb@7 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <7>; - - iommus = <&apps_smmu 0x1007 0x40>, - <&apps_smmu 0x1067 0x0>, - <&apps_smmu 0x1087 0x0>; - dma-coherent; - }; - }; - - gpr { - compatible = "qcom,gpr"; - qcom,glink-channels = "adsp_apps"; - qcom,domain = <GPR_DOMAIN_ID_ADSP>; - qcom,intents = <512 20>; - #address-cells = <1>; - #size-cells = <0>; - - q6apm: service@1 { - compatible = "qcom,q6apm"; - reg = <GPR_APM_MODULE_IID>; - #sound-dai-cells = <0>; - qcom,protection-domain = "avs/audio", - "msm/adsp/audio_pd"; - - q6apmbedai: bedais { - compatible = "qcom,q6apm-lpass-dais"; - #sound-dai-cells = <1>; - }; - - q6apmdai: dais { - compatible = "qcom,q6apm-dais"; - iommus = <&apps_smmu 0x1001 0x80>, - <&apps_smmu 0x1061 0x0>; - }; - }; - - q6prm: service@2 { - compatible = "qcom,q6prm"; - reg = <GPR_PRM_MODULE_IID>; - qcom,protection-domain = "avs/audio", - "msm/adsp/audio_pd"; - - q6prmcc: clock-controller { - compatible = "qcom,q6prm-lpass-clocks"; - #clock-cells = <2>; - }; - }; - }; - }; - }; - nsp_noc: interconnect@320c0000 { compatible = "qcom,sm8650-nsp-noc"; reg = <0 0x320c0000 0 0xf080>;
On 9.12.2024 12:02 PM, Krzysztof Kozlowski wrote:
The address space in ADSP PAS (Peripheral Authentication Service) remoteproc node should point to the QDSP PUB address space (QDSP6...SS_PUB): 0x0680_0000 with length of 0x10000.
0x3000_0000, value used so far, is the main region of CDSP. Downstream DTS uses 0x0300_0000, which is oddly similar to 0x3000_0000, yet quite different and points to unused area.
Correct the base address and length, which also moves the node to different place to keep things sorted by unit address. The diff looks big, but only the unit address and "reg" property were changed. This should have no functional impact on Linux users, because PAS loader does not use this address space at all.
Fixes: 10e024671295 ("arm64: dts: qcom: sm8650: add interconnect dependent device nodes") Cc: stable@vger.kernel.org Reviewed-by: Neil Armstrong neil.armstrong@linaro.org Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org
Reviewed-by: Konrad Dybcio konrad.dybcio@oss.qualcomm.com
Konrad
The address space in CDSP PAS (Peripheral Authentication Service) remoteproc node should point to the QDSP PUB address space (QDSP6...SS_PUB) which has a length of 0x10000. Value of 0x1400000 was copied from older DTS, but it does not look accurate at all.
This should have no functional impact on Linux users, because PAS loader does not use this address space at all.
Fixes: 10e024671295 ("arm64: dts: qcom: sm8650: add interconnect dependent device nodes") Cc: stable@vger.kernel.org Reviewed-by: Neil Armstrong neil.armstrong@linaro.org Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/sm8650.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi index 95ec82bce3162bce4a3da6122a41fee37118740e..1d935bcdcb2eee7b56e0a1f71c303a54d870e672 100644 --- a/arch/arm64/boot/dts/qcom/sm8650.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi @@ -5481,7 +5481,7 @@ nsp_noc: interconnect@320c0000 {
remoteproc_cdsp: remoteproc@32300000 { compatible = "qcom,sm8650-cdsp-pas"; - reg = <0 0x32300000 0 0x1400000>; + reg = <0x0 0x32300000 0x0 0x10000>;
interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
On 9.12.2024 12:02 PM, Krzysztof Kozlowski wrote:
The address space in CDSP PAS (Peripheral Authentication Service) remoteproc node should point to the QDSP PUB address space (QDSP6...SS_PUB) which has a length of 0x10000. Value of 0x1400000 was copied from older DTS, but it does not look accurate at all.
This should have no functional impact on Linux users, because PAS loader does not use this address space at all.
Fixes: 10e024671295 ("arm64: dts: qcom: sm8650: add interconnect dependent device nodes") Cc: stable@vger.kernel.org Reviewed-by: Neil Armstrong neil.armstrong@linaro.org Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org
Reviewed-by: Konrad Dybcio konrad.dybcio@oss.qualcomm.com
Konrad
The address space in MPSS/Modem PAS (Peripheral Authentication Service) remoteproc node should point to the QDSP PUB address space (QDSP6...SS_PUB) which has a length of 0x10000. Value of 0x4040 was copied from older DTS, but it grew since then.
This should have no functional impact on Linux users, because PAS loader does not use this address space at all.
Fixes: 10e024671295 ("arm64: dts: qcom: sm8650: add interconnect dependent device nodes") Cc: stable@vger.kernel.org Reviewed-by: Neil Armstrong neil.armstrong@linaro.org Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/sm8650.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi index 1d935bcdcb2eee7b56e0a1f71c303a54d870e672..6ae81c191fae8f1788adb399a364886d3fc2dfdb 100644 --- a/arch/arm64/boot/dts/qcom/sm8650.dtsi +++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi @@ -2853,7 +2853,7 @@ ipa: ipa@3f40000 {
remoteproc_mpss: remoteproc@4080000 { compatible = "qcom,sm8650-mpss-pas"; - reg = <0 0x04080000 0 0x4040>; + reg = <0x0 0x04080000 0x0 0x10000>;
interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>, <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
On 9.12.2024 12:02 PM, Krzysztof Kozlowski wrote:
The address space in MPSS/Modem PAS (Peripheral Authentication Service) remoteproc node should point to the QDSP PUB address space (QDSP6...SS_PUB) which has a length of 0x10000. Value of 0x4040 was copied from older DTS, but it grew since then.
This should have no functional impact on Linux users, because PAS loader does not use this address space at all.
Fixes: 10e024671295 ("arm64: dts: qcom: sm8650: add interconnect dependent device nodes") Cc: stable@vger.kernel.org Reviewed-by: Neil Armstrong neil.armstrong@linaro.org Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org
Reviewed-by: Konrad Dybcio konrad.dybcio@oss.qualcomm.com
Konrad
The address space in ADSP PAS (Peripheral Authentication Service) remoteproc node should point to the QDSP PUB address space (QDSP6...SS_PUB): 0x0680_0000 with length of 0x10000.
0x3000_0000, value used so far, is the main region of CDSP and was simply copied from other/older DTS.
Correct the base address and length, which also moves the node to different place to keep things sorted by unit address. The diff looks big, but only the unit address and "reg" property were changed. This should have no functional impact on Linux users, because PAS loader does not use this address space at all.
Fixes: 5f2a9cd4b104 ("arm64: dts: qcom: x1e80100: Add ADSP/CDSP remoteproc nodes") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org
---
Changes in v2: 1. Commit msg corrections, second paragraph (Johan) --- arch/arm64/boot/dts/qcom/x1e80100.dtsi | 274 ++++++++++++++++----------------- 1 file changed, 137 insertions(+), 137 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi index c18b99765c25c901b3d0a3fbaddc320c0a8c1716..9df6903b5d59aadda26d9e0d4d9f951c5c3add7b 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi +++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi @@ -3720,6 +3720,143 @@ nsp_noc: interconnect@320c0000 { #interconnect-cells = <2>; };
+ remoteproc_adsp: remoteproc@6800000 { + compatible = "qcom,x1e80100-adsp-pas"; + reg = <0x0 0x06800000 0x0 0x10000>; + + interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, + <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack"; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + power-domains = <&rpmhpd RPMHPD_LCX>, + <&rpmhpd RPMHPD_LMX>; + power-domain-names = "lcx", + "lmx"; + + interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC QCOM_ICC_TAG_ALWAYS + &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; + + memory-region = <&adspslpi_mem>, + <&q6_adsp_dtb_mem>; + + qcom,qmp = <&aoss_qmp>; + + qcom,smem-states = <&smp2p_adsp_out 0>; + qcom,smem-state-names = "stop"; + + status = "disabled"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "lpass"; + qcom,remote-pid = <2>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "adsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x1003 0x80>, + <&apps_smmu 0x1063 0x0>; + dma-coherent; + }; + + compute-cb@4 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <4>; + iommus = <&apps_smmu 0x1004 0x80>, + <&apps_smmu 0x1064 0x0>; + dma-coherent; + }; + + compute-cb@5 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <5>; + iommus = <&apps_smmu 0x1005 0x80>, + <&apps_smmu 0x1065 0x0>; + dma-coherent; + }; + + compute-cb@6 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <6>; + iommus = <&apps_smmu 0x1006 0x80>, + <&apps_smmu 0x1066 0x0>; + dma-coherent; + }; + + compute-cb@7 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <7>; + iommus = <&apps_smmu 0x1007 0x80>, + <&apps_smmu 0x1067 0x0>; + dma-coherent; + }; + }; + + gpr { + compatible = "qcom,gpr"; + qcom,glink-channels = "adsp_apps"; + qcom,domain = <GPR_DOMAIN_ID_ADSP>; + qcom,intents = <512 20>; + #address-cells = <1>; + #size-cells = <0>; + + q6apm: service@1 { + compatible = "qcom,q6apm"; + reg = <GPR_APM_MODULE_IID>; + #sound-dai-cells = <0>; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + + q6apmbedai: bedais { + compatible = "qcom,q6apm-lpass-dais"; + #sound-dai-cells = <1>; + }; + + q6apmdai: dais { + compatible = "qcom,q6apm-dais"; + iommus = <&apps_smmu 0x1001 0x80>, + <&apps_smmu 0x1061 0x0>; + }; + }; + + q6prm: service@2 { + compatible = "qcom,q6prm"; + reg = <GPR_PRM_MODULE_IID>; + qcom,protection-domain = "avs/audio", + "msm/adsp/audio_pd"; + + q6prmcc: clock-controller { + compatible = "qcom,q6prm-lpass-clocks"; + #clock-cells = <2>; + }; + }; + }; + }; + }; + lpass_wsa2macro: codec@6aa0000 { compatible = "qcom,x1e80100-lpass-wsa-macro", "qcom,sm8550-lpass-wsa-macro"; reg = <0 0x06aa0000 0 0x1000>; @@ -6319,143 +6456,6 @@ system-cache-controller@25000000 { interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>; };
- remoteproc_adsp: remoteproc@30000000 { - compatible = "qcom,x1e80100-adsp-pas"; - reg = <0 0x30000000 0 0x100>; - - interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, - <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, - <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, - <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, - <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "wdog", - "fatal", - "ready", - "handover", - "stop-ack"; - - clocks = <&rpmhcc RPMH_CXO_CLK>; - clock-names = "xo"; - - power-domains = <&rpmhpd RPMHPD_LCX>, - <&rpmhpd RPMHPD_LMX>; - power-domain-names = "lcx", - "lmx"; - - interconnects = <&lpass_lpicx_noc MASTER_LPASS_PROC QCOM_ICC_TAG_ALWAYS - &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>; - - memory-region = <&adspslpi_mem>, - <&q6_adsp_dtb_mem>; - - qcom,qmp = <&aoss_qmp>; - - qcom,smem-states = <&smp2p_adsp_out 0>; - qcom,smem-state-names = "stop"; - - status = "disabled"; - - glink-edge { - interrupts-extended = <&ipcc IPCC_CLIENT_LPASS - IPCC_MPROC_SIGNAL_GLINK_QMP - IRQ_TYPE_EDGE_RISING>; - mboxes = <&ipcc IPCC_CLIENT_LPASS - IPCC_MPROC_SIGNAL_GLINK_QMP>; - - label = "lpass"; - qcom,remote-pid = <2>; - - fastrpc { - compatible = "qcom,fastrpc"; - qcom,glink-channels = "fastrpcglink-apps-dsp"; - label = "adsp"; - qcom,non-secure-domain; - #address-cells = <1>; - #size-cells = <0>; - - compute-cb@3 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <3>; - iommus = <&apps_smmu 0x1003 0x80>, - <&apps_smmu 0x1063 0x0>; - dma-coherent; - }; - - compute-cb@4 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <4>; - iommus = <&apps_smmu 0x1004 0x80>, - <&apps_smmu 0x1064 0x0>; - dma-coherent; - }; - - compute-cb@5 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <5>; - iommus = <&apps_smmu 0x1005 0x80>, - <&apps_smmu 0x1065 0x0>; - dma-coherent; - }; - - compute-cb@6 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <6>; - iommus = <&apps_smmu 0x1006 0x80>, - <&apps_smmu 0x1066 0x0>; - dma-coherent; - }; - - compute-cb@7 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <7>; - iommus = <&apps_smmu 0x1007 0x80>, - <&apps_smmu 0x1067 0x0>; - dma-coherent; - }; - }; - - gpr { - compatible = "qcom,gpr"; - qcom,glink-channels = "adsp_apps"; - qcom,domain = <GPR_DOMAIN_ID_ADSP>; - qcom,intents = <512 20>; - #address-cells = <1>; - #size-cells = <0>; - - q6apm: service@1 { - compatible = "qcom,q6apm"; - reg = <GPR_APM_MODULE_IID>; - #sound-dai-cells = <0>; - qcom,protection-domain = "avs/audio", - "msm/adsp/audio_pd"; - - q6apmbedai: bedais { - compatible = "qcom,q6apm-lpass-dais"; - #sound-dai-cells = <1>; - }; - - q6apmdai: dais { - compatible = "qcom,q6apm-dais"; - iommus = <&apps_smmu 0x1001 0x80>, - <&apps_smmu 0x1061 0x0>; - }; - }; - - q6prm: service@2 { - compatible = "qcom,q6prm"; - reg = <GPR_PRM_MODULE_IID>; - qcom,protection-domain = "avs/audio", - "msm/adsp/audio_pd"; - - q6prmcc: clock-controller { - compatible = "qcom,q6prm-lpass-clocks"; - #clock-cells = <2>; - }; - }; - }; - }; - }; - remoteproc_cdsp: remoteproc@32300000 { compatible = "qcom,x1e80100-cdsp-pas"; reg = <0 0x32300000 0 0x1400000>;
On 9.12.2024 12:02 PM, Krzysztof Kozlowski wrote:
The address space in ADSP PAS (Peripheral Authentication Service) remoteproc node should point to the QDSP PUB address space (QDSP6...SS_PUB): 0x0680_0000 with length of 0x10000.
0x3000_0000, value used so far, is the main region of CDSP and was simply copied from other/older DTS.
Correct the base address and length, which also moves the node to different place to keep things sorted by unit address. The diff looks big, but only the unit address and "reg" property were changed. This should have no functional impact on Linux users, because PAS loader does not use this address space at all.
Fixes: 5f2a9cd4b104 ("arm64: dts: qcom: x1e80100: Add ADSP/CDSP remoteproc nodes") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org
Reviewed-by: Konrad Dybcio konrad.dybcio@oss.qualcomm.com
Konrad
The address space in CDSP PAS (Peripheral Authentication Service) remoteproc node should point to the QDSP PUB address space (QDSP6...SS_PUB) which has a length of 0x10000. Value of 0x1400000 was copied from older DTS, but it does not look accurate at all.
This should have no functional impact on Linux users, because PAS loader does not use this address space at all.
Fixes: 5f2a9cd4b104 ("arm64: dts: qcom: x1e80100: Add ADSP/CDSP remoteproc nodes") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/x1e80100.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi index 9df6903b5d59aadda26d9e0d4d9f951c5c3add7b..bc2187700ead2f368172040b23e1343cf0895012 100644 --- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi +++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi @@ -6458,7 +6458,7 @@ system-cache-controller@25000000 {
remoteproc_cdsp: remoteproc@32300000 { compatible = "qcom,x1e80100-cdsp-pas"; - reg = <0 0x32300000 0 0x1400000>; + reg = <0x0 0x32300000 0x0 0x10000>;
interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
On 9.12.2024 12:02 PM, Krzysztof Kozlowski wrote:
The address space in CDSP PAS (Peripheral Authentication Service) remoteproc node should point to the QDSP PUB address space (QDSP6...SS_PUB) which has a length of 0x10000. Value of 0x1400000 was copied from older DTS, but it does not look accurate at all.
This should have no functional impact on Linux users, because PAS loader does not use this address space at all.
Fixes: 5f2a9cd4b104 ("arm64: dts: qcom: x1e80100: Add ADSP/CDSP remoteproc nodes") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org
Reviewed-by: Konrad Dybcio konrad.dybcio@oss.qualcomm.com
Konrad
The address space in ADSP (Peripheral Authentication Service) remoteproc node should point to the QDSP PUB address space (QDSP6...SS_PUB) which has a length of 0x10000.
This should have no functional impact on Linux users, because PAS loader does not use this address space at all.
Fixes: efc33c969f23 ("arm64: dts: qcom: sm6350: Add ADSP nodes") Cc: stable@vger.kernel.org Tested-by: Luca Weiss luca.weiss@fairphone.com Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/sm6350.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi index 8d697280249fefcc62ab0848e949b5509deb32a6..3df506c2745ea27f956ef7d7a4b5fbaf6285c428 100644 --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi @@ -1283,7 +1283,7 @@ tcsr_mutex: hwlock@1f40000 {
adsp: remoteproc@3000000 { compatible = "qcom,sm6350-adsp-pas"; - reg = <0 0x03000000 0 0x100>; + reg = <0x0 0x03000000 0x0 0x10000>;
interrupts-extended = <&pdc 6 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
On 9.12.2024 12:02 PM, Krzysztof Kozlowski wrote:
The address space in ADSP (Peripheral Authentication Service) remoteproc node should point to the QDSP PUB address space (QDSP6...SS_PUB) which has a length of 0x10000.
This should have no functional impact on Linux users, because PAS loader does not use this address space at all.
Fixes: efc33c969f23 ("arm64: dts: qcom: sm6350: Add ADSP nodes") Cc: stable@vger.kernel.org Tested-by: Luca Weiss luca.weiss@fairphone.com Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org
Reviewed-by: Konrad Dybcio konrad.dybcio@oss.qualcomm.com
Konrad
The address space in MPSS/Modem PAS (Peripheral Authentication Service) remoteproc node should point to the QDSP PUB address space (QDSP6...SS_PUB) which has a length of 0x10000. Value of 0x4040 was copied from older DTS, but it grew since then.
This should have no functional impact on Linux users, because PAS loader does not use this address space at all.
Cc: stable@vger.kernel.org Tested-by: Luca Weiss luca.weiss@fairphone.com Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/sm6350.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi index 3df506c2745ea27f956ef7d7a4b5fbaf6285c428..64b9602c912c970b49f57e7f2b3d557c44717d38 100644 --- a/arch/arm64/boot/dts/qcom/sm6350.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi @@ -1503,7 +1503,7 @@ gpucc: clock-controller@3d90000 {
mpss: remoteproc@4080000 { compatible = "qcom,sm6350-mpss-pas"; - reg = <0x0 0x04080000 0x0 0x4040>; + reg = <0x0 0x04080000 0x0 0x10000>;
interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_EDGE_RISING>, <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
On 9.12.2024 12:02 PM, Krzysztof Kozlowski wrote:
The address space in MPSS/Modem PAS (Peripheral Authentication Service) remoteproc node should point to the QDSP PUB address space (QDSP6...SS_PUB) which has a length of 0x10000. Value of 0x4040 was copied from older DTS, but it grew since then.
This should have no functional impact on Linux users, because PAS loader does not use this address space at all.
Cc: stable@vger.kernel.org Tested-by: Luca Weiss luca.weiss@fairphone.com Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org
Reviewed-by: Konrad Dybcio konrad.dybcio@oss.qualcomm.com
Konrad
On 12/12/2024 19:55, Konrad Dybcio wrote:
On 9.12.2024 12:02 PM, Krzysztof Kozlowski wrote:
The address space in MPSS/Modem PAS (Peripheral Authentication Service) remoteproc node should point to the QDSP PUB address space (QDSP6...SS_PUB) which has a length of 0x10000. Value of 0x4040 was copied from older DTS, but it grew since then.
This should have no functional impact on Linux users, because PAS loader does not use this address space at all.
Cc: stable@vger.kernel.org Tested-by: Luca Weiss luca.weiss@fairphone.com Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org
Reviewed-by: Konrad Dybcio konrad.dybcio@oss.qualcomm.com
Thanks. I got the access to sm6115 and sdx75, so I will send v3 with 4 new patches for them.
Best regards, Krzysztof
The address space in ADSP (Peripheral Authentication Service) remoteproc node should point to the QDSP PUB address space (QDSP6...SS_PUB) which has a length of 0x10000.
This should have no functional impact on Linux users, because PAS loader does not use this address space at all.
Fixes: fe6fd26aeddf ("arm64: dts: qcom: sm6375: Add ADSP&CDSP") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/sm6375.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi index e0b1c54e98c0e8d244b5f658eaee2af5001c3855..613319021238a1fec44660cd9740a980edeb3f10 100644 --- a/arch/arm64/boot/dts/qcom/sm6375.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi @@ -1559,7 +1559,7 @@ IPCC_MPROC_SIGNAL_GLINK_QMP
remoteproc_adsp: remoteproc@a400000 { compatible = "qcom,sm6375-adsp-pas"; - reg = <0 0x0a400000 0 0x100>; + reg = <0 0x0a400000 0 0x10000>;
interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_EDGE_RISING>, <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
The address space in CDSP PAS (Peripheral Authentication Service) remoteproc node should point to the QDSP PUB address space (QDSP6...SS_PUB): 0x0b30_0000 with length of 0x10000.
0x0b00_0000, value used so far, is the main region of CDSP.
Correct the base address and length, which should have no functional impact on Linux users, because PAS loader does not use this address space at all.
Fixes: fe6fd26aeddf ("arm64: dts: qcom: sm6375: Add ADSP&CDSP") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/sm6375.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi index 613319021238a1fec44660cd9740a980edeb3f10..bb6511cb451b1c45ed2669f208fe3ed00848b481 100644 --- a/arch/arm64/boot/dts/qcom/sm6375.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi @@ -1595,9 +1595,9 @@ IPCC_MPROC_SIGNAL_GLINK_QMP }; };
- remoteproc_cdsp: remoteproc@b000000 { + remoteproc_cdsp: remoteproc@b300000 { compatible = "qcom,sm6375-cdsp-pas"; - reg = <0x0 0x0b000000 0x0 0x100000>; + reg = <0x0 0x0b300000 0x0 0x10000>;
interrupts-extended = <&intc GIC_SPI 265 IRQ_TYPE_EDGE_RISING>, <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
The address space in MPSS/Modem PAS (Peripheral Authentication Service) remoteproc node should point to the QDSP PUB address space (QDSP6...SS_PUB): 0x0608_0000 with length of 0x10000.
0x0600_0000, value used so far, is the main region of Modem.
Correct the base address and length, which should have no functional impact on Linux users, because PAS loader does not use this address space at all.
Fixes: 31cc61104f68 ("arm64: dts: qcom: sm6375: Add modem nodes") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org --- arch/arm64/boot/dts/qcom/sm6375.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi index bb6511cb451b1c45ed2669f208fe3ed00848b481..4f1d4b233697005aa48dbf80700fb28980d88cc8 100644 --- a/arch/arm64/boot/dts/qcom/sm6375.dtsi +++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi @@ -1516,9 +1516,9 @@ gpucc: clock-controller@5990000 { #power-domain-cells = <1>; };
- remoteproc_mss: remoteproc@6000000 { + remoteproc_mss: remoteproc@6080000 { compatible = "qcom,sm6375-mpss-pas"; - reg = <0 0x06000000 0 0x4040>; + reg = <0x0 0x06080000 0x0 0x10000>;
interrupts-extended = <&intc GIC_SPI 307 IRQ_TYPE_EDGE_RISING>, <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
linux-stable-mirror@lists.linaro.org
-
Konrad Dybcio -
Krzysztof Kozlowski