[PATCH AUTOSEL 5.15 1/7] ASoC: rsnd: don't indicate warning on rsnd_kctrl_accept_runtime()
From: Kuninori Morimoto kuninori.morimoto.gx@renesas.com
[ Upstream commit c3fc002b206c6c83d1e3702b979733002ba6fb2c ]
rsnd_kctrl_accept_runtime() (1) is used for runtime convert rate (= Synchronous SRC Mode). Now, rsnd driver has 2 kctrls for it
(A): "SRC Out Rate Switch" (B): "SRC Out Rate" // it calls (1)
(A): can be called anytime (B): can be called only runtime, and will indicate warning if it was used at non-runtime.
To use runtime convert rate (= Synchronous SRC Mode), user might uses command in below order.
(X): > amixer set "SRC Out Rate" on > aplay xxx.wav & (Y): > amixer set "SRC Out Rate" 48010 // convert rate to 48010Hz
(Y): calls B (X): calls both A and B.
In this case, when user calls (X), it calls both (A) and (B), but it is not yet start running. So, (B) will indicate warning.
This warning was added by commit b5c088689847 ("ASoC: rsnd: add warning message to rsnd_kctrl_accept_runtime()"), but the message sounds like the operation was not correct. Let's update warning message.
The message is very SRC specific, implement it in src.c
Signed-off-by: Kuninori Morimoto kuninori.morimoto.gx@renesas.com Reviewed-by: Yoshihiro Shimoda yoshihiro.shimoda.uh@renesas.com Link: https://patch.msgid.link/8734gt2qed.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/sh/rcar/core.c | 14 -------------- sound/soc/sh/rcar/rsnd.h | 1 - sound/soc/sh/rcar/src.c | 18 +++++++++++++++++- 3 files changed, 17 insertions(+), 16 deletions(-)
diff --git a/sound/soc/sh/rcar/core.c b/sound/soc/sh/rcar/core.c index af8ef2a27d341..65022ba5c5875 100644 --- a/sound/soc/sh/rcar/core.c +++ b/sound/soc/sh/rcar/core.c @@ -1694,20 +1694,6 @@ int rsnd_kctrl_accept_anytime(struct rsnd_dai_stream *io) return 1; }
-int rsnd_kctrl_accept_runtime(struct rsnd_dai_stream *io) -{ - struct snd_pcm_runtime *runtime = rsnd_io_to_runtime(io); - struct rsnd_priv *priv = rsnd_io_to_priv(io); - struct device *dev = rsnd_priv_to_dev(priv); - - if (!runtime) { - dev_warn(dev, "Can't update kctrl when idle\n"); - return 0; - } - - return 1; -} - struct rsnd_kctrl_cfg *rsnd_kctrl_init_m(struct rsnd_kctrl_cfg_m *cfg) { cfg->cfg.val = cfg->val; diff --git a/sound/soc/sh/rcar/rsnd.h b/sound/soc/sh/rcar/rsnd.h index f8ef6836ef84e..690f4932357c1 100644 --- a/sound/soc/sh/rcar/rsnd.h +++ b/sound/soc/sh/rcar/rsnd.h @@ -742,7 +742,6 @@ struct rsnd_kctrl_cfg_s { #define rsnd_kctrl_vals(x) ((x).val) /* = (x).cfg.val[0] */
int rsnd_kctrl_accept_anytime(struct rsnd_dai_stream *io); -int rsnd_kctrl_accept_runtime(struct rsnd_dai_stream *io); struct rsnd_kctrl_cfg *rsnd_kctrl_init_m(struct rsnd_kctrl_cfg_m *cfg); struct rsnd_kctrl_cfg *rsnd_kctrl_init_s(struct rsnd_kctrl_cfg_s *cfg); int rsnd_kctrl_new(struct rsnd_mod *mod, diff --git a/sound/soc/sh/rcar/src.c b/sound/soc/sh/rcar/src.c index f832165e46bc0..9893839666d7b 100644 --- a/sound/soc/sh/rcar/src.c +++ b/sound/soc/sh/rcar/src.c @@ -530,6 +530,22 @@ static irqreturn_t rsnd_src_interrupt(int irq, void *data) return IRQ_HANDLED; }
+static int rsnd_src_kctrl_accept_runtime(struct rsnd_dai_stream *io) +{ + struct snd_pcm_runtime *runtime = rsnd_io_to_runtime(io); + + if (!runtime) { + struct rsnd_priv *priv = rsnd_io_to_priv(io); + struct device *dev = rsnd_priv_to_dev(priv); + + dev_warn(dev, ""SRC Out Rate" can use during running\n"); + + return 0; + } + + return 1; +} + static int rsnd_src_probe_(struct rsnd_mod *mod, struct rsnd_dai_stream *io, struct rsnd_priv *priv) @@ -593,7 +609,7 @@ static int rsnd_src_pcm_new(struct rsnd_mod *mod, rsnd_io_is_play(io) ? "SRC Out Rate" : "SRC In Rate", - rsnd_kctrl_accept_runtime, + rsnd_src_kctrl_accept_runtime, rsnd_src_set_convert_rate, &src->sync, 192000);
From: Vitaly Rodionov vitalyr@opensource.cirrus.com
[ Upstream commit 679074942c2502a95842a80471d8fb718165ac77 ]
Using `fsleep` instead of `msleep` resolves some customer complaints regarding the precision of up/down DAPM event timing. `fsleep()` automatically selects the appropriate sleep function, making the delay time more predictable.
Signed-off-by: Vitaly Rodionov vitalyr@opensource.cirrus.com Link: https://patch.msgid.link/20250205160849.500306-1-vitalyr@opensource.cirrus.c... Reviewed-by: Charles Keepax ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/arizona.c | 14 +++++++------- sound/soc/codecs/madera.c | 10 +++++----- sound/soc/codecs/wm5110.c | 8 ++++---- 3 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/sound/soc/codecs/arizona.c b/sound/soc/codecs/arizona.c index e32871b3f68ac..be207350b7124 100644 --- a/sound/soc/codecs/arizona.c +++ b/sound/soc/codecs/arizona.c @@ -967,7 +967,7 @@ int arizona_out_ev(struct snd_soc_dapm_widget *w, case ARIZONA_OUT3L_ENA_SHIFT: case ARIZONA_OUT3R_ENA_SHIFT: priv->out_up_pending++; - priv->out_up_delay += 17; + priv->out_up_delay += 17000; break; case ARIZONA_OUT4L_ENA_SHIFT: case ARIZONA_OUT4R_ENA_SHIFT: @@ -977,7 +977,7 @@ int arizona_out_ev(struct snd_soc_dapm_widget *w, case WM8997: break; default: - priv->out_up_delay += 10; + priv->out_up_delay += 10000; break; } break; @@ -999,7 +999,7 @@ int arizona_out_ev(struct snd_soc_dapm_widget *w, if (!priv->out_up_pending && priv->out_up_delay) { dev_dbg(component->dev, "Power up delay: %d\n", priv->out_up_delay); - msleep(priv->out_up_delay); + fsleep(priv->out_up_delay); priv->out_up_delay = 0; } break; @@ -1017,7 +1017,7 @@ int arizona_out_ev(struct snd_soc_dapm_widget *w, case ARIZONA_OUT3L_ENA_SHIFT: case ARIZONA_OUT3R_ENA_SHIFT: priv->out_down_pending++; - priv->out_down_delay++; + priv->out_down_delay += 1000; break; case ARIZONA_OUT4L_ENA_SHIFT: case ARIZONA_OUT4R_ENA_SHIFT: @@ -1028,10 +1028,10 @@ int arizona_out_ev(struct snd_soc_dapm_widget *w, break; case WM8998: case WM1814: - priv->out_down_delay += 5; + priv->out_down_delay += 5000; break; default: - priv->out_down_delay++; + priv->out_down_delay += 1000; break; } break; @@ -1053,7 +1053,7 @@ int arizona_out_ev(struct snd_soc_dapm_widget *w, if (!priv->out_down_pending && priv->out_down_delay) { dev_dbg(component->dev, "Power down delay: %d\n", priv->out_down_delay); - msleep(priv->out_down_delay); + fsleep(priv->out_down_delay); priv->out_down_delay = 0; } break; diff --git a/sound/soc/codecs/madera.c b/sound/soc/codecs/madera.c index fd4fa1d5d2d12..5775898fc6f9e 100644 --- a/sound/soc/codecs/madera.c +++ b/sound/soc/codecs/madera.c @@ -2322,10 +2322,10 @@ int madera_out_ev(struct snd_soc_dapm_widget *w, case CS42L92: case CS47L92: case CS47L93: - out_up_delay = 6; + out_up_delay = 6000; break; default: - out_up_delay = 17; + out_up_delay = 17000; break; }
@@ -2356,7 +2356,7 @@ int madera_out_ev(struct snd_soc_dapm_widget *w, case MADERA_OUT3R_ENA_SHIFT: priv->out_up_pending--; if (!priv->out_up_pending) { - msleep(priv->out_up_delay); + fsleep(priv->out_up_delay); priv->out_up_delay = 0; } break; @@ -2375,7 +2375,7 @@ int madera_out_ev(struct snd_soc_dapm_widget *w, case MADERA_OUT3L_ENA_SHIFT: case MADERA_OUT3R_ENA_SHIFT: priv->out_down_pending++; - priv->out_down_delay++; + priv->out_down_delay += 1000; break; default: break; @@ -2392,7 +2392,7 @@ int madera_out_ev(struct snd_soc_dapm_widget *w, case MADERA_OUT3R_ENA_SHIFT: priv->out_down_pending--; if (!priv->out_down_pending) { - msleep(priv->out_down_delay); + fsleep(priv->out_down_delay); priv->out_down_delay = 0; } break; diff --git a/sound/soc/codecs/wm5110.c b/sound/soc/codecs/wm5110.c index 7c6e01720d651..bc3dfb53ba953 100644 --- a/sound/soc/codecs/wm5110.c +++ b/sound/soc/codecs/wm5110.c @@ -302,7 +302,7 @@ static int wm5110_hp_pre_enable(struct snd_soc_dapm_widget *w) } else { wseq = wm5110_no_dre_left_enable; nregs = ARRAY_SIZE(wm5110_no_dre_left_enable); - priv->out_up_delay += 10; + priv->out_up_delay += 10000; } break; case ARIZONA_OUT1R_ENA_SHIFT: @@ -312,7 +312,7 @@ static int wm5110_hp_pre_enable(struct snd_soc_dapm_widget *w) } else { wseq = wm5110_no_dre_right_enable; nregs = ARRAY_SIZE(wm5110_no_dre_right_enable); - priv->out_up_delay += 10; + priv->out_up_delay += 10000; } break; default: @@ -338,7 +338,7 @@ static int wm5110_hp_pre_disable(struct snd_soc_dapm_widget *w) snd_soc_component_update_bits(component, ARIZONA_SPARE_TRIGGERS, ARIZONA_WS_TRG1, 0); - priv->out_down_delay += 27; + priv->out_down_delay += 27000; } break; case ARIZONA_OUT1R_ENA_SHIFT: @@ -350,7 +350,7 @@ static int wm5110_hp_pre_disable(struct snd_soc_dapm_widget *w) snd_soc_component_update_bits(component, ARIZONA_SPARE_TRIGGERS, ARIZONA_WS_TRG2, 0); - priv->out_down_delay += 27; + priv->out_down_delay += 27000; } break; default:
From: Terry Cheong htcheong@chromium.org
[ Upstream commit 33b7dc7843dbdc9b90c91d11ba30b107f9138ffd ]
In enviornment without KMOD requesting module may fail to load snd-hda-codec-hdmi, resulting in HDMI audio not usable. Add softdep to loading HDMI codec module first to ensure we can load it correctly.
Signed-off-by: Terry Cheong htcheong@chromium.org Reviewed-by: Bard Liao yung-chuan.liao@linux.intel.com Reviewed-by: Johny Lin lpg76627@gmail.com Reviewed-by: Péter Ujfalusi peter.ujfalusi@linux.intel.com Signed-off-by: Peter Ujfalusi peter.ujfalusi@linux.intel.com Link: https://patch.msgid.link/20250206094723.18013-1-peter.ujfalusi@linux.intel.c... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/sof/intel/hda-codec.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/sound/soc/sof/intel/hda-codec.c b/sound/soc/sof/intel/hda-codec.c index 6744318de612e..0449e7a2669ff 100644 --- a/sound/soc/sof/intel/hda-codec.c +++ b/sound/soc/sof/intel/hda-codec.c @@ -258,6 +258,7 @@ int hda_codec_i915_exit(struct snd_sof_dev *sdev) } EXPORT_SYMBOL_NS(hda_codec_i915_exit, SND_SOC_SOF_HDA_AUDIO_CODEC_I915);
+MODULE_SOFTDEP("pre: snd-hda-codec-hdmi"); #endif
MODULE_LICENSE("Dual BSD/GPL");
From: Stephan Gerhold stephan.gerhold@linaro.org
[ Upstream commit 0d1fac6d26aff5df21bb4ec980d9b7a11c410b96 ]
When using the Qualcomm X55 modem on the ThinkPad X13s, the kernel log is constantly being filled with errors related to a "sequence number glitch", e.g.:
[ 1903.284538] sequence number glitch prev=16 curr=0 [ 1913.812205] sequence number glitch prev=50 curr=0 [ 1923.698219] sequence number glitch prev=142 curr=0 [ 2029.248276] sequence number glitch prev=1555 curr=0 [ 2046.333059] sequence number glitch prev=70 curr=0 [ 2076.520067] sequence number glitch prev=272 curr=0 [ 2158.704202] sequence number glitch prev=2655 curr=0 [ 2218.530776] sequence number glitch prev=2349 curr=0 [ 2225.579092] sequence number glitch prev=6 curr=0
Internet connectivity is working fine, so this error seems harmless. It looks like modem does not preserve the sequence number when entering low power state; the amount of errors depends on how actively the modem is being used.
A similar issue has also been seen on USB-based MBIM modems [1]. However, in cdc_ncm.c the "sequence number glitch" message is a debug message instead of an error. Apply the same to the mhi_wwan_mbim.c driver to silence these errors when using the modem.
[1]: https://lists.freedesktop.org/archives/libmbim-devel/2016-November/000781.ht...
Signed-off-by: Stephan Gerhold stephan.gerhold@linaro.org Reviewed-by: Loic Poulain loic.poulain@linaro.org Acked-by: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org Link: https://patch.msgid.link/20250212-mhi-wwan-mbim-sequence-glitch-v1-1-5037359... Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wwan/mhi_wwan_mbim.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wwan/mhi_wwan_mbim.c b/drivers/net/wwan/mhi_wwan_mbim.c index ef70bb7c88ad6..43c20deab3189 100644 --- a/drivers/net/wwan/mhi_wwan_mbim.c +++ b/drivers/net/wwan/mhi_wwan_mbim.c @@ -209,7 +209,7 @@ static int mbim_rx_verify_nth16(struct mhi_mbim_context *mbim, struct sk_buff *s if (mbim->rx_seq + 1 != le16_to_cpu(nth16->wSequence) && (mbim->rx_seq || le16_to_cpu(nth16->wSequence)) && !(mbim->rx_seq == 0xffff && !le16_to_cpu(nth16->wSequence))) { - net_err_ratelimited("sequence number glitch prev=%d curr=%d\n", + net_dbg_ratelimited("sequence number glitch prev=%d curr=%d\n", mbim->rx_seq, le16_to_cpu(nth16->wSequence)); } mbim->rx_seq = le16_to_cpu(nth16->wSequence);
From: Ruozhu Li david.li@jaguarmicro.com
[ Upstream commit 3988ac1c67e6e84d2feb987d7b36d5791174b3da ]
The queue state checking in nvmet_rdma_recv_done is not in queue state lock.Queue state can transfer to LIVE in cm establish handler between state checking and state lock here, cause a silent drop of nvme connect cmd. Recheck queue state whether in LIVE state in state lock to prevent this issue.
Signed-off-by: Ruozhu Li david.li@jaguarmicro.com Reviewed-by: Sagi Grimberg sagi@grimberg.me Signed-off-by: Keith Busch kbusch@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/target/rdma.c | 33 +++++++++++++++++++++++---------- 1 file changed, 23 insertions(+), 10 deletions(-)
diff --git a/drivers/nvme/target/rdma.c b/drivers/nvme/target/rdma.c index 9561ba3d43138..3b4b2d134cf81 100644 --- a/drivers/nvme/target/rdma.c +++ b/drivers/nvme/target/rdma.c @@ -996,6 +996,27 @@ static void nvmet_rdma_handle_command(struct nvmet_rdma_queue *queue, nvmet_req_complete(&cmd->req, status); }
+static bool nvmet_rdma_recv_not_live(struct nvmet_rdma_queue *queue, + struct nvmet_rdma_rsp *rsp) +{ + unsigned long flags; + bool ret = true; + + spin_lock_irqsave(&queue->state_lock, flags); + /* + * recheck queue state is not live to prevent a race condition + * with RDMA_CM_EVENT_ESTABLISHED handler. + */ + if (queue->state == NVMET_RDMA_Q_LIVE) + ret = false; + else if (queue->state == NVMET_RDMA_Q_CONNECTING) + list_add_tail(&rsp->wait_list, &queue->rsp_wait_list); + else + nvmet_rdma_put_rsp(rsp); + spin_unlock_irqrestore(&queue->state_lock, flags); + return ret; +} + static void nvmet_rdma_recv_done(struct ib_cq *cq, struct ib_wc *wc) { struct nvmet_rdma_cmd *cmd = @@ -1037,17 +1058,9 @@ static void nvmet_rdma_recv_done(struct ib_cq *cq, struct ib_wc *wc) rsp->req.port = queue->port; rsp->n_rdma = 0;
- if (unlikely(queue->state != NVMET_RDMA_Q_LIVE)) { - unsigned long flags; - - spin_lock_irqsave(&queue->state_lock, flags); - if (queue->state == NVMET_RDMA_Q_CONNECTING) - list_add_tail(&rsp->wait_list, &queue->rsp_wait_list); - else - nvmet_rdma_put_rsp(rsp); - spin_unlock_irqrestore(&queue->state_lock, flags); + if (unlikely(queue->state != NVMET_RDMA_Q_LIVE) && + nvmet_rdma_recv_not_live(queue, rsp)) return; - }
nvmet_rdma_handle_command(queue, rsp); }
From: Yu-Chun Lin eleanor15x@gmail.com
[ Upstream commit 606572eb22c1786a3957d24307f5760bb058ca19 ]
According to the C11 standard (ISO/IEC 9899:2011, 6.5.7): "If E1 has a signed type and E1 x 2^E2 is not representable in the result type, the behavior is undefined."
Shifting 1 << 31 causes signed integer overflow, which leads to undefined behavior.
Fix this by explicitly using '1U << 31' to ensure the shift operates on an unsigned type, avoiding undefined behavior.
Signed-off-by: Yu-Chun Lin eleanor15x@gmail.com Link: https://patch.msgid.link/20250218081217.3468369-1-eleanor15x@gmail.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/sctp/stream.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/sctp/stream.c b/net/sctp/stream.c index ee6514af830f7..0527728aee986 100644 --- a/net/sctp/stream.c +++ b/net/sctp/stream.c @@ -735,7 +735,7 @@ struct sctp_chunk *sctp_process_strreset_tsnreq( * value SHOULD be the smallest TSN not acknowledged by the * receiver of the request plus 2^31. */ - init_tsn = sctp_tsnmap_get_ctsn(&asoc->peer.tsn_map) + (1 << 31); + init_tsn = sctp_tsnmap_get_ctsn(&asoc->peer.tsn_map) + (1U << 31); sctp_tsnmap_init(&asoc->peer.tsn_map, SCTP_TSN_MAP_INITIAL, init_tsn, GFP_ATOMIC);
From: Daniel Wagner wagi@kernel.org
[ Upstream commit d2fe192348f93fe3a0cb1e33e4aba58e646397f4 ]
The fabric transports and also the PCI transport are not entering the LIVE state from NEW or RESETTING. This makes the state machine more restrictive and allows to catch not supported state transitions, e.g. directly switching from RESETTING to LIVE.
Reviewed-by: Sagi Grimberg sagi@grimberg.me Signed-off-by: Daniel Wagner wagi@kernel.org Signed-off-by: Keith Busch kbusch@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/host/core.c | 2 -- 1 file changed, 2 deletions(-)
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 93a19588ae92a..a3293d12d8841 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -444,8 +444,6 @@ bool nvme_change_ctrl_state(struct nvme_ctrl *ctrl, switch (new_state) { case NVME_CTRL_LIVE: switch (old_state) { - case NVME_CTRL_NEW: - case NVME_CTRL_RESETTING: case NVME_CTRL_CONNECTING: changed = true; fallthrough;
linux-stable-mirror@lists.linaro.org
-
Sasha Levin