From: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com

[ Upstream commit 9a1d248bb4beaf1b43d17ba12481ee0629fa29b9 ]

Missing entry to find a machine driver for ES83x6-based platforms.

Link: https://github.com/thesofproject/linux/issues/3873 Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Reviewed-by: Bard Liao yung-chuan.liao@linux.intel.com Link: https://lore.kernel.org/r/20221031195836.250193-1-pierre-louis.bossart@linux... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/intel/common/soc-acpi-intel-icl-match.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)

diff --git a/sound/soc/intel/common/soc-acpi-intel-icl-match.c b/sound/soc/intel/common/soc-acpi-intel-icl-match.c index 9a529a785288..80995dc732a1 100644 --- a/sound/soc/intel/common/soc-acpi-intel-icl-match.c +++ b/sound/soc/intel/common/soc-acpi-intel-icl-match.c @@ -10,6 +10,11 @@ #include <sound/soc-acpi-intel-match.h> #include "../skylake/skl.h"

+static const struct snd_soc_acpi_codecs essx_83x6 = { + .num_codecs = 3, + .codecs = { "ESSX8316", "ESSX8326", "ESSX8336"}, +}; + static struct skl_machine_pdata icl_pdata = { .use_tplg_pcm = true, }; @@ -29,6 +34,14 @@ struct snd_soc_acpi_mach snd_soc_acpi_intel_icl_machines[] = { .sof_fw_filename = "sof-icl.ri", .sof_tplg_filename = "sof-icl-rt5682.tplg", }, + { + .comp_ids = &essx_83x6, + .drv_name = "sof-essx8336", + .sof_tplg_filename = "sof-icl-es8336", /* the tplg suffix is added at run time */ + .tplg_quirk_mask = SND_SOC_ACPI_TPLG_INTEL_SSP_NUMBER | + SND_SOC_ACPI_TPLG_INTEL_SSP_MSB | + SND_SOC_ACPI_TPLG_INTEL_DMIC_NUMBER, + }, {}, }; EXPORT_SYMBOL_GPL(snd_soc_acpi_intel_icl_machines);

From: Lukas Wunner lukas@wunner.de

[ Upstream commit 038ee49fef18710bedd38b531d173ccd746b2d8d ]

RS485-enabled UART ports on TI Sitara SoCs with active-low polarity exhibit a Transmit Enable glitch on ->set_termios():

omap8250_restore_regs(), which is called from omap_8250_set_termios(), sets the TCRTLR bit in the MCR register and clears all other bits, including RTS. If RTS uses active-low polarity, it is now asserted for no reason.

The TCRTLR bit is subsequently cleared by writing up->mcr to the MCR register. That variable is always zero, so the RTS bit is still cleared (incorrectly so if RTS is active-high).

(up->mcr is not, as one might think, a cache of the MCR register's current value. Rather, it only caches a single bit of that register, the AFE bit. And it only does so if the UART supports the AFE bit, which OMAP does not. For details see serial8250_do_set_termios() and serial8250_do_set_mctrl().)

Finally at the end of omap8250_restore_regs(), the MCR register is restored (and RTS deasserted) by a call to up->port.ops->set_mctrl() (which equals serial8250_set_mctrl()) and serial8250_em485_stop_tx().

So there's an RTS glitch between setting TCRTLR and calling serial8250_em485_stop_tx(). Avoid by using a read-modify-write when setting TCRTLR.

While at it, drop a redundant initialization of up->mcr. As explained above, the variable isn't used by the driver and it is already initialized to zero because it is part of the static struct serial8250_ports[] declared in 8250_core.c. (Static structs are initialized to zero per section 6.7.8 nr. 10 of the C99 standard.)

Cc: Jan Kiszka jan.kiszka@siemens.com Cc: Su Bao Cheng baocheng.su@siemens.com Tested-by: Matthias Schiffer matthias.schiffer@ew.tq-group.com Signed-off-by: Lukas Wunner lukas@wunner.de Link: https://lore.kernel.org/r/6554b0241a2c7fd50f32576fdbafed96709e11e8.166427894... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/tty/serial/8250/8250_omap.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index f3744ac805ec..61cf7b3169c2 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -292,6 +292,7 @@ static void omap8250_restore_regs(struct uart_8250_port *up) { struct omap8250_priv *priv = up->port.private_data; struct uart_8250_dma *dma = up->dma; + u8 mcr = serial8250_in_MCR(up);

if (dma && dma->tx_running) { /* @@ -308,7 +309,7 @@ static void omap8250_restore_regs(struct uart_8250_port *up) serial_out(up, UART_EFR, UART_EFR_ECB);

serial_out(up, UART_LCR, UART_LCR_CONF_MODE_A); - serial8250_out_MCR(up, UART_MCR_TCRTLR); + serial8250_out_MCR(up, mcr | UART_MCR_TCRTLR); serial_out(up, UART_FCR, up->fcr);

omap8250_update_scr(up, priv); @@ -324,7 +325,8 @@ static void omap8250_restore_regs(struct uart_8250_port *up) serial_out(up, UART_LCR, 0);

/* drop TCR + TLR access, we setup XON/XOFF later */ - serial8250_out_MCR(up, up->mcr); + serial8250_out_MCR(up, mcr); + serial_out(up, UART_IER, up->ier);

serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); @@ -683,7 +685,6 @@ static int omap_8250_startup(struct uart_port *port)

pm_runtime_get_sync(port->dev);

- up->mcr = 0; serial_out(up, UART_FCR, UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);

serial_out(up, UART_LCR, UART_LCR_WLEN8);

From: Hans de Goede hdegoede@redhat.com

[ Upstream commit 8e9ada1d0e72b4737df400fe1bba48dc42a68df7 ]

It seems that the Windows drivers for the ACPI0011 soc_button_array device use low level triggered IRQs rather then using edge triggering.

Some ACPI tables depend on this, directly poking the GPIO controller's registers to clear the trigger type when closing a laptop's/2-in-1's lid and re-instating the trigger when opening the lid again.

Linux sets the edge/level on which to trigger to both low+high since it is using edge type IRQs, the ACPI tables then ends up also setting the bit for level IRQs and since both low and high level have been selected by Linux we get an IRQ storm leading to soft lockups.

As a workaround for this the soc_button_array already contains a DMI quirk table with device models known to have this issue.

Add a module parameter for this so that users can easily test if their device is affected too and so that they can use the module parameter as a workaround.

Signed-off-by: Hans de Goede hdegoede@redhat.com Link: https://lore.kernel.org/r/20221106215320.67109-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/input/misc/soc_button_array.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/drivers/input/misc/soc_button_array.c b/drivers/input/misc/soc_button_array.c index efffcf0ebd3b..46ba8218de99 100644 --- a/drivers/input/misc/soc_button_array.c +++ b/drivers/input/misc/soc_button_array.c @@ -18,6 +18,10 @@ #include <linux/gpio.h> #include <linux/platform_device.h>

+static bool use_low_level_irq; +module_param(use_low_level_irq, bool, 0444); +MODULE_PARM_DESC(use_low_level_irq, "Use low-level triggered IRQ instead of edge triggered"); + struct soc_button_info { const char *name; int acpi_index; @@ -164,7 +168,8 @@ soc_button_device_create(struct platform_device *pdev, }

/* See dmi_use_low_level_irq[] comment */ - if (!autorepeat && dmi_check_system(dmi_use_low_level_irq)) { + if (!autorepeat && (use_low_level_irq || + dmi_check_system(dmi_use_low_level_irq))) { irq_set_irq_type(irq, IRQ_TYPE_LEVEL_LOW); gpio_keys[n_buttons].irq = irq; gpio_keys[n_buttons].gpio = -ENOENT;

From: Marek Marczykowski-Górecki marmarek@invisiblethingslab.com

[ Upstream commit 5e29500eba2aa19e1323df46f64dafcd4a327092 ]

When Xen domain configures MSI-X, the usual approach is to enable MSI-X together with masking all of them via the config space, then fill the table and only then clear PCI_MSIX_FLAGS_MASKALL. Allow doing this via QEMU running in a stub domain.

Previously, when changing PCI_MSIX_FLAGS_MASKALL was not allowed, the whole write was aborted, preventing change to the PCI_MSIX_FLAGS_ENABLE bit too.

Note the Xen hypervisor intercepts this write anyway, and may keep the PCI_MSIX_FLAGS_MASKALL bit set if it wishes to. It will store the guest-requested state and will apply it eventually.

Signed-off-by: Marek Marczykowski-Górecki marmarek@invisiblethingslab.com Reviewed-by: Jan Beulich jbeulich@suse.com Link: https://lore.kernel.org/r/20221114103110.1519413-1-marmarek@invisiblethingsl... Signed-off-by: Juergen Gross jgross@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/xen/xen-pciback/conf_space_capability.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/xen/xen-pciback/conf_space_capability.c b/drivers/xen/xen-pciback/conf_space_capability.c index 5e53b4817f16..097316a74126 100644 --- a/drivers/xen/xen-pciback/conf_space_capability.c +++ b/drivers/xen/xen-pciback/conf_space_capability.c @@ -190,13 +190,16 @@ static const struct config_field caplist_pm[] = { };

static struct msi_msix_field_config { - u16 enable_bit; /* bit for enabling MSI/MSI-X */ - unsigned int int_type; /* interrupt type for exclusiveness check */ + u16 enable_bit; /* bit for enabling MSI/MSI-X */ + u16 allowed_bits; /* bits allowed to be changed */ + unsigned int int_type; /* interrupt type for exclusiveness check */ } msi_field_config = { .enable_bit = PCI_MSI_FLAGS_ENABLE, + .allowed_bits = PCI_MSI_FLAGS_ENABLE, .int_type = INTERRUPT_TYPE_MSI, }, msix_field_config = { .enable_bit = PCI_MSIX_FLAGS_ENABLE, + .allowed_bits = PCI_MSIX_FLAGS_ENABLE | PCI_MSIX_FLAGS_MASKALL, .int_type = INTERRUPT_TYPE_MSIX, };

@@ -229,7 +232,7 @@ static int msi_msix_flags_write(struct pci_dev *dev, int offset, u16 new_value, return 0;

if (!dev_data->allow_interrupt_control || - (new_value ^ old_value) & ~field_config->enable_bit) + (new_value ^ old_value) & ~field_config->allowed_bits) return PCIBIOS_SET_FAILED;

if (new_value & field_config->enable_bit) {

From: Xiongfeng Wang wangxiongfeng2@huawei.com

[ Upstream commit d0cdd85046b15089df71a50548617ac1025300d0 ]

pci_get_device() will increase the reference count for the returned pci_dev. We need to use pci_dev_put() to decrease the reference count before asus_wmi_set_xusb2pr() returns.

Signed-off-by: Xiongfeng Wang wangxiongfeng2@huawei.com Link: https://lore.kernel.org/r/20221111100752.134311-1-wangxiongfeng2@huawei.com Reviewed-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/asus-wmi.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c index 39e1a6396e08..db369cf26111 100644 --- a/drivers/platform/x86/asus-wmi.c +++ b/drivers/platform/x86/asus-wmi.c @@ -1212,6 +1212,8 @@ static void asus_wmi_set_xusb2pr(struct asus_wmi *asus) pci_write_config_dword(xhci_pdev, USB_INTEL_XUSB2PR, cpu_to_le32(ports_available));

+ pci_dev_put(xhci_pdev); + pr_info("set USB_INTEL_XUSB2PR old: 0x%04x, new: 0x%04x\n", orig_ports_available, ports_available); }

From: Damien Le Moal damien.lemoal@opensource.wdc.com

[ Upstream commit 7dd12d65ac646046a3fe0bbf9a4e86f4514207b3 ]

When an IO error occurs, the function __zonefs_io_error() is used to issue a zone report to obtain the latest zone information from the device. This function gets a zone report for all zones used as storage for a file, which is always 1 zone except for files representing aggregated conventional zones.

The number of zones of a zone report for a file is calculated in __zonefs_io_error() by doing a bit-shift of the inode i_zone_size field, which is equal to or larger than the device zone size. However, this calculation does not take into account that the last zone of a zoned device may be smaller than the zone size reported by bdev_zone_sectors() (which is used to set the bit shift size). As a result, if an error occurs for an IO targetting such last smaller zone, the zone report will ask for 0 zones, leading to an invalid zone report.

Fix this by using the fact that all files require a 1 zone report, except if the inode i_zone_size field indicates a zone size larger than the device zone size. This exception case corresponds to a mount with aggregated conventional zones.

A check for this exception is added to the file inode initialization during mount. If an invalid setup is detected, emit an error and fail the mount (check contributed by Johannes Thumshirn).

Signed-off-by: Johannes Thumshirn johannes.thumshirn@wdc.com Signed-off-by: Damien Le Moal damien.lemoal@opensource.wdc.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/zonefs/super.c | 37 +++++++++++++++++++++++++++---------- 1 file changed, 27 insertions(+), 10 deletions(-)

diff --git a/fs/zonefs/super.c b/fs/zonefs/super.c index bf5cb6efb8c0..475d23a4f8da 100644 --- a/fs/zonefs/super.c +++ b/fs/zonefs/super.c @@ -440,14 +440,22 @@ static void __zonefs_io_error(struct inode *inode, bool write) struct super_block *sb = inode->i_sb; struct zonefs_sb_info *sbi = ZONEFS_SB(sb); unsigned int noio_flag; - unsigned int nr_zones = - zi->i_zone_size >> (sbi->s_zone_sectors_shift + SECTOR_SHIFT); + unsigned int nr_zones = 1; struct zonefs_ioerr_data err = { .inode = inode, .write = write, }; int ret;

+ /* + * The only files that have more than one zone are conventional zone + * files with aggregated conventional zones, for which the inode zone + * size is always larger than the device zone size. + */ + if (zi->i_zone_size > bdev_zone_sectors(sb->s_bdev)) + nr_zones = zi->i_zone_size >> + (sbi->s_zone_sectors_shift + SECTOR_SHIFT); + /* * Memory allocations in blkdev_report_zones() can trigger a memory * reclaim which may in turn cause a recursion into zonefs as well as @@ -1364,6 +1372,14 @@ static int zonefs_init_file_inode(struct inode *inode, struct blk_zone *zone, zi->i_ztype = type; zi->i_zsector = zone->start; zi->i_zone_size = zone->len << SECTOR_SHIFT; + if (zi->i_zone_size > bdev_zone_sectors(sb->s_bdev) << SECTOR_SHIFT && + !(sbi->s_features & ZONEFS_F_AGGRCNV)) { + zonefs_err(sb, + "zone size %llu doesn't match device's zone sectors %llu\n", + zi->i_zone_size, + bdev_zone_sectors(sb->s_bdev) << SECTOR_SHIFT); + return -EINVAL; + }

zi->i_max_size = min_t(loff_t, MAX_LFS_FILESIZE, zone->capacity << SECTOR_SHIFT); @@ -1406,11 +1422,11 @@ static struct dentry *zonefs_create_inode(struct dentry *parent, struct inode *dir = d_inode(parent); struct dentry *dentry; struct inode *inode; - int ret; + int ret = -ENOMEM;

dentry = d_alloc_name(parent, name); if (!dentry) - return NULL; + return ERR_PTR(ret);

inode = new_inode(parent->d_sb); if (!inode) @@ -1435,7 +1451,7 @@ static struct dentry *zonefs_create_inode(struct dentry *parent, dput: dput(dentry);

- return NULL; + return ERR_PTR(ret); }

struct zonefs_zone_data { @@ -1455,7 +1471,7 @@ static int zonefs_create_zgroup(struct zonefs_zone_data *zd, struct blk_zone *zone, *next, *end; const char *zgroup_name; char *file_name; - struct dentry *dir; + struct dentry *dir, *dent; unsigned int n = 0; int ret;

@@ -1473,8 +1489,8 @@ static int zonefs_create_zgroup(struct zonefs_zone_data *zd, zgroup_name = "seq";

dir = zonefs_create_inode(sb->s_root, zgroup_name, NULL, type); - if (!dir) { - ret = -ENOMEM; + if (IS_ERR(dir)) { + ret = PTR_ERR(dir); goto free; }

@@ -1520,8 +1536,9 @@ static int zonefs_create_zgroup(struct zonefs_zone_data *zd, * Use the file number within its group as file name. */ snprintf(file_name, ZONEFS_NAME_MAX - 1, "%u", n); - if (!zonefs_create_inode(dir, file_name, zone, type)) { - ret = -ENOMEM; + dent = zonefs_create_inode(dir, file_name, zone, type); + if (IS_ERR(dent)) { + ret = PTR_ERR(dent); goto free; }

From: Gleb Mazovetskiy glex.spb@gmail.com

[ Upstream commit aeac4ec8f46d610a10adbaeff5e2edf6a88ffc62 ]

On embedded systems with little memory and no relevant security concerns, it is beneficial to reduce the size of the table.

Reducing the size from 2^16 to 2^8 saves 255 KiB of kernel RAM.

Makes the table size configurable as an expert option.

The size was previously increased from 2^8 to 2^16 in commit 4c2c8f03a5ab ("tcp: increase source port perturb table to 2^16").

Signed-off-by: Gleb Mazovetskiy glex.spb@gmail.com Reviewed-by: Kuniyuki Iwashima kuniyu@amazon.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/ipv4/Kconfig | 10 ++++++++++ net/ipv4/inet_hashtables.c | 10 +++++----- 2 files changed, 15 insertions(+), 5 deletions(-)

diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig index 87983e70f03f..23b06063e1a5 100644 --- a/net/ipv4/Kconfig +++ b/net/ipv4/Kconfig @@ -403,6 +403,16 @@ config INET_IPCOMP

If unsure, say Y.

+config INET_TABLE_PERTURB_ORDER + int "INET: Source port perturbation table size (as power of 2)" if EXPERT + default 16 + help + Source port perturbation table size (as power of 2) for + RFC 6056 3.3.4. Algorithm 4: Double-Hash Port Selection Algorithm. + + The default is almost always what you want. + Only change this if you know what you are doing. + config INET_XFRM_TUNNEL tristate select INET_TUNNEL diff --git a/net/ipv4/inet_hashtables.c b/net/ipv4/inet_hashtables.c index c0de655fffd7..c68a1dae25ca 100644 --- a/net/ipv4/inet_hashtables.c +++ b/net/ipv4/inet_hashtables.c @@ -721,13 +721,13 @@ EXPORT_SYMBOL_GPL(inet_unhash); * Note that we use 32bit integers (vs RFC 'short integers') * because 2^16 is not a multiple of num_ephemeral and this * property might be used by clever attacker. + * * RFC claims using TABLE_LENGTH=10 buckets gives an improvement, though - * attacks were since demonstrated, thus we use 65536 instead to really - * give more isolation and privacy, at the expense of 256kB of kernel - * memory. + * attacks were since demonstrated, thus we use 65536 by default instead + * to really give more isolation and privacy, at the expense of 256kB + * of kernel memory. */ -#define INET_TABLE_PERTURB_SHIFT 16 -#define INET_TABLE_PERTURB_SIZE (1 << INET_TABLE_PERTURB_SHIFT) +#define INET_TABLE_PERTURB_SIZE (1 << CONFIG_INET_TABLE_PERTURB_ORDER) static u32 *table_perturb;

int __inet_hash_connect(struct inet_timewait_death_row *death_row,

From: Keith Busch kbusch@kernel.org

[ Upstream commit 29aa778bb66795e6a78b1c99beadc83887827868 ]

This device mapper needs bio vectors to be sized and memory aligned to the logical block size. Set the minimum required queue limit accordingly.

Signed-off-by: Keith Busch kbusch@kernel.org Reviewed-by: Mike Snitzer snitzer@kernel.org Link: https://lore.kernel.org/r/20221110184501.2451620-5-kbusch@meta.com Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/md/dm-integrity.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/md/dm-integrity.c b/drivers/md/dm-integrity.c index 835b1f3464d0..cdb6bee2352b 100644 --- a/drivers/md/dm-integrity.c +++ b/drivers/md/dm-integrity.c @@ -3213,6 +3213,7 @@ static void dm_integrity_io_hints(struct dm_target *ti, struct queue_limits *lim limits->logical_block_size = ic->sectors_per_block << SECTOR_SHIFT; limits->physical_block_size = ic->sectors_per_block << SECTOR_SHIFT; blk_limits_io_min(limits, ic->sectors_per_block << SECTOR_SHIFT); + limits->dma_alignment = limits->logical_block_size - 1; } }

From: Enrico Sau enrico.sau@gmail.com

[ Upstream commit e103ba33998d0f25653cc8ebe745b68d1ee10cda ]

Add the following Telit LE910C4-WWX composition:

0x103a: rmnet

Signed-off-by: Enrico Sau enrico.sau@gmail.com Acked-by: Bjørn Mork bjorn@mork.no Link: https://lore.kernel.org/r/20221115105859.14324-1-enrico.sau@gmail.com Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index a1c9233e264d..7313e6e03c12 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -1292,6 +1292,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x2357, 0x0201, 4)}, /* TP-LINK HSUPA Modem MA180 */ {QMI_FIXED_INTF(0x2357, 0x9000, 4)}, /* TP-LINK MA260 */ {QMI_QUIRK_SET_DTR(0x1bc7, 0x1031, 3)}, /* Telit LE910C1-EUX */ + {QMI_QUIRK_SET_DTR(0x1bc7, 0x103a, 0)}, /* Telit LE910C4-WWX */ {QMI_QUIRK_SET_DTR(0x1bc7, 0x1040, 2)}, /* Telit LE922A */ {QMI_QUIRK_SET_DTR(0x1bc7, 0x1050, 2)}, /* Telit FN980 */ {QMI_QUIRK_SET_DTR(0x1bc7, 0x1060, 2)}, /* Telit LN920 */

From: Mikulas Patocka mpatocka@redhat.com

[ Upstream commit 5e5dab5ec763d600fe0a67837dd9155bdc42f961 ]

This commit flushes the journal on suspend. It is prerequisite for the next commit that enables activating dm integrity devices in read-only mode.

Note that we deliberately didn't flush the journal on suspend, so that the journal replay code would be tested. However, the dm-integrity code is 5 years old now, so that journal replay is well-tested, and we can make this change now.

Signed-off-by: Mikulas Patocka mpatocka@redhat.com Signed-off-by: Mike Snitzer snitzer@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/md/dm-integrity.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-)

diff --git a/drivers/md/dm-integrity.c b/drivers/md/dm-integrity.c index cdb6bee2352b..518116c1a716 100644 --- a/drivers/md/dm-integrity.c +++ b/drivers/md/dm-integrity.c @@ -2470,10 +2470,6 @@ static void integrity_writer(struct work_struct *w)

unsigned prev_free_sectors;

- /* the following test is not needed, but it tests the replay code */ - if (unlikely(dm_post_suspending(ic->ti)) && !ic->meta_dev) - return; - spin_lock_irq(&ic->endio_wait.lock); write_start = ic->committed_section; write_sections = ic->n_committed_sections; @@ -2980,8 +2976,7 @@ static void dm_integrity_postsuspend(struct dm_target *ti) drain_workqueue(ic->commit_wq);

if (ic->mode == 'J') { - if (ic->meta_dev) - queue_work(ic->writer_wq, &ic->writer_work); + queue_work(ic->writer_wq, &ic->writer_work); drain_workqueue(ic->writer_wq); dm_integrity_flush_buffers(ic, true); }