From: Ranjani Sridharan ranjani.sridharan@linux.intel.com
[ Upstream commit 2ce0d008dcc59f9c01f43277b9f9743af7b01dad ]
The limitation to assign a link DMA channel for a BE iff the corresponding host DMA channel is assigned to a connected FE is only applicable if the PROCEN_FMT_QUIRK is set. So, remove it for platforms that do not enable the quirk.
Complements: a792bfc1c2bc ("ASoC: SOF: Intel: hda-stream: limit PROCEN workaround") Signed-off-by: Ranjani Sridharan ranjani.sridharan@linux.intel.com Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Reviewed-by: Rander Wang rander.wang@intel.com Reviewed-by: Kai Vehmanen kai.vehmanen@linux.intel.com Reviewed-by: Peter Ujfalusi peter.ujfalusi@linux.intel.com Signed-off-by: Peter Ujfalusi peter.ujfalusi@linux.intel.com Link: https://lore.kernel.org/r/20220128130017.28508-1-peter.ujfalusi@linux.intel.... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/sof/intel/hda-dai.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)
diff --git a/sound/soc/sof/intel/hda-dai.c b/sound/soc/sof/intel/hda-dai.c index b3cdd10c83ae..80e3a02e629f 100644 --- a/sound/soc/sof/intel/hda-dai.c +++ b/sound/soc/sof/intel/hda-dai.c @@ -57,6 +57,8 @@ static struct hdac_ext_stream * { struct snd_soc_pcm_runtime *rtd = substream->private_data; struct sof_intel_hda_stream *hda_stream; + const struct sof_intel_dsp_desc *chip; + struct snd_sof_dev *sdev; struct hdac_ext_stream *res = NULL; struct hdac_stream *stream = NULL;
@@ -75,9 +77,20 @@ static struct hdac_ext_stream * continue;
hda_stream = hstream_to_sof_hda_stream(hstream); + sdev = hda_stream->sdev; + chip = get_chip_info(sdev->pdata);
/* check if link is available */ if (!hstream->link_locked) { + /* + * choose the first available link for platforms that do not have the + * PROCEN_FMT_QUIRK set. + */ + if (!(chip->quirks & SOF_INTEL_PROCEN_FMT_QUIRK)) { + res = hstream; + break; + } + if (stream->opened) { /* * check if the stream tag matches the stream
From: Tim Gardner tim.gardner@canonical.com
[ Upstream commit 37a1a2e6eeeb101285cd34e12e48a881524701aa ]
Coverity complains of a possible buffer overflow. However, given the 'static' scope of nvidia_setup_i2c_bus() it looks like that can't happen after examiniing the call sites.
CID 19036 (#1 of 1): Copy into fixed size buffer (STRING_OVERFLOW) 1. fixed_size_dest: You might overrun the 48-character fixed-size string chan->adapter.name by copying name without checking the length. 2. parameter_as_source: Note: This defect has an elevated risk because the source argument is a parameter of the current function. 89 strcpy(chan->adapter.name, name);
Fix this warning by using strscpy() which will silence the warning and prevent any future buffer overflows should the names used to identify the channel become much longer.
Cc: Antonino Daplas adaplas@gmail.com Cc: linux-fbdev@vger.kernel.org Cc: dri-devel@lists.freedesktop.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Tim Gardner tim.gardner@canonical.com Signed-off-by: Helge Deller deller@gmx.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/video/fbdev/nvidia/nv_i2c.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/video/fbdev/nvidia/nv_i2c.c b/drivers/video/fbdev/nvidia/nv_i2c.c index d7994a173245..0b48965a6420 100644 --- a/drivers/video/fbdev/nvidia/nv_i2c.c +++ b/drivers/video/fbdev/nvidia/nv_i2c.c @@ -86,7 +86,7 @@ static int nvidia_setup_i2c_bus(struct nvidia_i2c_chan *chan, const char *name, { int rc;
- strcpy(chan->adapter.name, name); + strscpy(chan->adapter.name, name, sizeof(chan->adapter.name)); chan->adapter.owner = THIS_MODULE; chan->adapter.class = i2c_class; chan->adapter.algo_data = &chan->algo;
From: Evgeny Novikov novikov@ispras.ru
[ Upstream commit 8738ddcac644964ae128ccd3d80d48773c8d528e ]
w100fb_probe() did not reset the global state to its initial state. This can result in invocation of iounmap() even when there was not the appropriate successful call of ioremap(). For instance, this may be the case if first probe fails after two successful ioremap() while second probe fails when first ioremap() fails. The similar issue is with w100fb_remove(). The patch fixes both bugs.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Evgeny Novikov novikov@ispras.ru Co-developed-by: Kirill Shilimanov kirill.shilimanov@huawei.com Signed-off-by: Kirill Shilimanov kirill.shilimanov@huawei.com Signed-off-by: Helge Deller deller@gmx.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/video/fbdev/w100fb.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-)
diff --git a/drivers/video/fbdev/w100fb.c b/drivers/video/fbdev/w100fb.c index e30f9427b335..52ec80bbfe5e 100644 --- a/drivers/video/fbdev/w100fb.c +++ b/drivers/video/fbdev/w100fb.c @@ -770,12 +770,18 @@ int w100fb_probe(struct platform_device *pdev) fb_dealloc_cmap(&info->cmap); kfree(info->pseudo_palette); } - if (remapped_fbuf != NULL) + if (remapped_fbuf != NULL) { iounmap(remapped_fbuf); - if (remapped_regs != NULL) + remapped_fbuf = NULL; + } + if (remapped_regs != NULL) { iounmap(remapped_regs); - if (remapped_base != NULL) + remapped_regs = NULL; + } + if (remapped_base != NULL) { iounmap(remapped_base); + remapped_base = NULL; + } if (info) framebuffer_release(info); return err; @@ -795,8 +801,11 @@ static int w100fb_remove(struct platform_device *pdev) fb_dealloc_cmap(&info->cmap);
iounmap(remapped_base); + remapped_base = NULL; iounmap(remapped_regs); + remapped_regs = NULL; iounmap(remapped_fbuf); + remapped_fbuf = NULL;
framebuffer_release(info);
From: George Kennedy george.kennedy@oracle.com
[ Upstream commit 5c6f402bdcf9e7239c6bc7087eda71ac99b31379 ]
Do a sanity check on pixclock value to avoid divide by zero.
If the pixclock value is zero, the cirrusfb driver will round up pixclock to get the derived frequency as close to maxclock as possible.
Syzkaller reported a divide error in cirrusfb_check_pixclock.
divide error: 0000 [#1] SMP KASAN PTI CPU: 0 PID: 14938 Comm: cirrusfb_test Not tainted 5.15.0-rc6 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2 RIP: 0010:cirrusfb_check_var+0x6f1/0x1260
Call Trace: fb_set_var+0x398/0xf90 do_fb_ioctl+0x4b8/0x6f0 fb_ioctl+0xeb/0x130 __x64_sys_ioctl+0x19d/0x220 do_syscall_64+0x3a/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae
Signed-off-by: George Kennedy george.kennedy@oracle.com Reviewed-by: Geert Uytterhoeven geert@linux-m68k.org Signed-off-by: Helge Deller deller@gmx.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/video/fbdev/cirrusfb.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/video/fbdev/cirrusfb.c b/drivers/video/fbdev/cirrusfb.c index e4ce5667b125..1b0a58f96af2 100644 --- a/drivers/video/fbdev/cirrusfb.c +++ b/drivers/video/fbdev/cirrusfb.c @@ -470,7 +470,7 @@ static int cirrusfb_check_mclk(struct fb_info *info, long freq) return 0; }
-static int cirrusfb_check_pixclock(const struct fb_var_screeninfo *var, +static int cirrusfb_check_pixclock(struct fb_var_screeninfo *var, struct fb_info *info) { long freq; @@ -479,9 +479,7 @@ static int cirrusfb_check_pixclock(const struct fb_var_screeninfo *var, unsigned maxclockidx = var->bits_per_pixel >> 3;
/* convert from ps to kHz */ - freq = PICOS2KHZ(var->pixclock); - - dev_dbg(info->device, "desired pixclock: %ld kHz\n", freq); + freq = PICOS2KHZ(var->pixclock ? : 1);
maxclock = cirrusfb_board_info[cinfo->btype].maxclock[maxclockidx]; cinfo->multiplexing = 0; @@ -489,11 +487,13 @@ static int cirrusfb_check_pixclock(const struct fb_var_screeninfo *var, /* If the frequency is greater than we can support, we might be able * to use multiplexing for the video mode */ if (freq > maxclock) { - dev_err(info->device, - "Frequency greater than maxclock (%ld kHz)\n", - maxclock); - return -EINVAL; + var->pixclock = KHZ2PICOS(maxclock); + + while ((freq = PICOS2KHZ(var->pixclock)) > maxclock) + var->pixclock++; } + dev_dbg(info->device, "desired pixclock: %ld kHz\n", freq); + /* * Additional constraint: 8bpp uses DAC clock doubling to allow maximum * pixel clock
From: Yang Guang yang.guang5@zte.com.cn
[ Upstream commit 24565bc4115961db7ee64fcc7ad2a7437c0d0a49 ]
coccinelle report: ./drivers/video/fbdev/omap2/omapfb/displays/panel-sony-acx565akm.c: 479:9-17: WARNING: use scnprintf or sprintf
Use sysfs_emit instead of scnprintf or sprintf makes more sense.
Reported-by: Zeal Robot zealci@zte.com.cn Signed-off-by: Yang Guang yang.guang5@zte.com.cn Signed-off-by: Helge Deller deller@gmx.de Signed-off-by: Sasha Levin sashal@kernel.org --- .../video/fbdev/omap2/omapfb/displays/panel-sony-acx565akm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-sony-acx565akm.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-sony-acx565akm.c index 1293515e4b16..0cbc5b9183f8 100644 --- a/drivers/video/fbdev/omap2/omapfb/displays/panel-sony-acx565akm.c +++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-sony-acx565akm.c @@ -476,7 +476,7 @@ static ssize_t show_cabc_available_modes(struct device *dev, int i;
if (!ddata->has_cabc) - return snprintf(buf, PAGE_SIZE, "%s\n", cabc_modes[0]); + return sysfs_emit(buf, "%s\n", cabc_modes[0]);
for (i = 0, len = 0; len < PAGE_SIZE && i < ARRAY_SIZE(cabc_modes); i++)
From: David Heidelberg david@ixit.cz
[ Upstream commit 6f7e221e7a5cfc3299616543fce42b36e631497b ]
IRQ types blindly copied from very similar APQ8064.
Fixes warnings as: WARNING: CPU: 0 PID: 1 at drivers/irqchip/irq-gic.c:1080 gic_irq_domain_translate+0x118/0x120 ...
Tested-by: LogicalErzor logicalerzor@gmail.com # boot-tested on Samsung S3 Signed-off-by: David Heidelberg david@ixit.cz Signed-off-by: Bjorn Andersson bjorn.andersson@linaro.org Link: https://lore.kernel.org/r/20220108174229.60384-1-david@ixit.cz Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/qcom-msm8960.dtsi | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom-msm8960.dtsi index f2aeaccdc1ad..15ff0e8fd0d3 100644 --- a/arch/arm/boot/dts/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom-msm8960.dtsi @@ -145,7 +145,9 @@ reg = <0x108000 0x1000>; qcom,ipc = <&l2cc 0x8 2>;
- interrupts = <0 19 0>, <0 21 0>, <0 22 0>; + interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 22 IRQ_TYPE_EDGE_RISING>; interrupt-names = "ack", "err", "wakeup";
regulators { @@ -191,7 +193,7 @@ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; reg = <0x16440000 0x1000>, <0x16400000 0x1000>; - interrupts = <0 154 0x0>; + interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>; clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>; clock-names = "core", "iface"; status = "disabled"; @@ -317,7 +319,7 @@ #address-cells = <1>; #size-cells = <0>; reg = <0x16080000 0x1000>; - interrupts = <0 147 0>; + interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; spi-max-frequency = <24000000>; cs-gpios = <&msmgpio 8 0>;
From: Richard Schleich rs@noreya.tech
[ Upstream commit bdf8762da268d2a34abf517c36528413906e9cd5 ]
This patch fixes the kernel warning "cacheinfo: Unable to detect cache hierarchy for CPU 0" for the bcm2837 on newer kernel versions.
Signed-off-by: Richard Schleich rs@noreya.tech Tested-by: Stefan Wahren stefan.wahren@i2se.com [florian: Align and remove comments matching property values] Signed-off-by: Florian Fainelli f.fainelli@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/bcm2837.dtsi | 49 ++++++++++++++++++++++++++++++++++ 1 file changed, 49 insertions(+)
diff --git a/arch/arm/boot/dts/bcm2837.dtsi b/arch/arm/boot/dts/bcm2837.dtsi index beb6c502dadc..bcad098a7fcc 100644 --- a/arch/arm/boot/dts/bcm2837.dtsi +++ b/arch/arm/boot/dts/bcm2837.dtsi @@ -38,12 +38,26 @@ #size-cells = <0>; enable-method = "brcm,bcm2836-smp"; // for ARM 32-bit
+ /* Source for d/i-cache-line-size and d/i-cache-sets + * https://developer.arm.com/documentation/ddi0500/e/level-1-memory-system + * /about-the-l1-memory-system?lang=en + * + * Source for d/i-cache-size + * https://magpi.raspberrypi.com/articles/raspberry-pi-3-specs-benchmarks + */ cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a53"; reg = <0>; enable-method = "spin-table"; cpu-release-addr = <0x0 0x000000d8>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set + next-level-cache = <&l2>; };
cpu1: cpu@1 { @@ -52,6 +66,13 @@ reg = <1>; enable-method = "spin-table"; cpu-release-addr = <0x0 0x000000e0>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set + next-level-cache = <&l2>; };
cpu2: cpu@2 { @@ -60,6 +81,13 @@ reg = <2>; enable-method = "spin-table"; cpu-release-addr = <0x0 0x000000e8>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set + next-level-cache = <&l2>; };
cpu3: cpu@3 { @@ -68,6 +96,27 @@ reg = <3>; enable-method = "spin-table"; cpu-release-addr = <0x0 0x000000f0>; + d-cache-size = <0x8000>; + d-cache-line-size = <64>; + d-cache-sets = <128>; // 32KiB(size)/64(line-size)=512ways/4-way set + i-cache-size = <0x8000>; + i-cache-line-size = <64>; + i-cache-sets = <256>; // 32KiB(size)/64(line-size)=512ways/2-way set + next-level-cache = <&l2>; + }; + + /* Source for cache-line-size + cache-sets + * https://developer.arm.com/documentation/ddi0500 + * /e/level-2-memory-system/about-the-l2-memory-system?lang=en + * Source for cache-size + * https://datasheets.raspberrypi.com/cm/cm1-and-cm3-datasheet.pdf + */ + l2: l2-cache0 { + compatible = "cache"; + cache-size = <0x80000>; + cache-line-size = <64>; + cache-sets = <512>; // 512KiB(size)/64(line-size)=8192ways/16-way set + cache-level = <2>; }; }; };
From: Charles Keepax ckeepax@opensource.cirrus.com
[ Upstream commit ec29170c724ca30305fc3a19ba2ee73ecac65509 ]
The Madera CODECs use regmap_irq functions but nothing ensures that regmap_irq is built into the kernel. Add dependencies on the ASoC symbols for the relevant MFD component. There is no point in building the ASoC driver if the MFD doesn't support it and the MFD part contains the necessary dependencies to ensure everything is built into the kernel.
Reported-by: Mark Brown broonie@kernel.org Signed-off-by: Charles Keepax ckeepax@opensource.cirrus.com Link: https://lore.kernel.org/r/20220203115025.16464-1-ckeepax@opensource.cirrus.c... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/Kconfig | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig index 229cc89f8c5a..466dc67799f4 100644 --- a/sound/soc/codecs/Kconfig +++ b/sound/soc/codecs/Kconfig @@ -586,21 +586,26 @@ config SND_SOC_CS4349
config SND_SOC_CS47L15 tristate + depends on MFD_CS47L15
config SND_SOC_CS47L24 tristate
config SND_SOC_CS47L35 tristate + depends on MFD_CS47L35
config SND_SOC_CS47L85 tristate + depends on MFD_CS47L85
config SND_SOC_CS47L90 tristate + depends on MFD_CS47L90
config SND_SOC_CS47L92 tristate + depends on MFD_CS47L92
# Cirrus Logic Quad-Channel ADC config SND_SOC_CS53L30
From: Ard Biesheuvel ardb@kernel.org
[ Upstream commit d11967870815b5ab89843980e35aab616c97c463 ]
Tweak the ftrace return paths to avoid redundant loads of SP, as well as unnecessary clobbering of IP.
This also fixes the inconsistency of using MOV to perform a function return, which is sub-optimal on recent micro-architectures but more importantly, does not perform an interworking return, unlike compiler generated function returns in Thumb2 builds.
Let's fix this by popping PC from the stack like most ordinary code does.
Signed-off-by: Ard Biesheuvel ardb@kernel.org Reviewed-by: Steven Rostedt (Google) rostedt@goodmis.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/kernel/entry-ftrace.S | 51 +++++++++++++++------------------- 1 file changed, 22 insertions(+), 29 deletions(-)
diff --git a/arch/arm/kernel/entry-ftrace.S b/arch/arm/kernel/entry-ftrace.S index a74289ebc803..5f1b1ce10473 100644 --- a/arch/arm/kernel/entry-ftrace.S +++ b/arch/arm/kernel/entry-ftrace.S @@ -22,10 +22,7 @@ * mcount can be thought of as a function called in the middle of a subroutine * call. As such, it needs to be transparent for both the caller and the * callee: the original lr needs to be restored when leaving mcount, and no - * registers should be clobbered. (In the __gnu_mcount_nc implementation, we - * clobber the ip register. This is OK because the ARM calling convention - * allows it to be clobbered in subroutines and doesn't use it to hold - * parameters.) + * registers should be clobbered. * * When using dynamic ftrace, we patch out the mcount call by a "pop {lr}" * instead of the __gnu_mcount_nc call (see arch/arm/kernel/ftrace.c). @@ -70,26 +67,25 @@
.macro __ftrace_regs_caller
- sub sp, sp, #8 @ space for PC and CPSR OLD_R0, + str lr, [sp, #-8]! @ store LR as PC and make space for CPSR/OLD_R0, @ OLD_R0 will overwrite previous LR
- add ip, sp, #12 @ move in IP the value of SP as it was - @ before the push {lr} of the mcount mechanism + ldr lr, [sp, #8] @ get previous LR
- str lr, [sp, #0] @ store LR instead of PC + str r0, [sp, #8] @ write r0 as OLD_R0 over previous LR
- ldr lr, [sp, #8] @ get previous LR + str lr, [sp, #-4]! @ store previous LR as LR
- str r0, [sp, #8] @ write r0 as OLD_R0 over previous LR + add lr, sp, #16 @ move in LR the value of SP as it was + @ before the push {lr} of the mcount mechanism
- stmdb sp!, {ip, lr} - stmdb sp!, {r0-r11, lr} + push {r0-r11, ip, lr}
@ stack content at this point: @ 0 4 48 52 56 60 64 68 72 - @ R0 | R1 | ... | LR | SP + 4 | previous LR | LR | PSR | OLD_R0 | + @ R0 | R1 | ... | IP | SP + 4 | previous LR | LR | PSR | OLD_R0 |
- mov r3, sp @ struct pt_regs* + mov r3, sp @ struct pt_regs*
ldr r2, =function_trace_op ldr r2, [r2] @ pointer to the current @@ -112,11 +108,9 @@ ftrace_graph_regs_call: #endif
@ pop saved regs - ldmia sp!, {r0-r12} @ restore r0 through r12 - ldr ip, [sp, #8] @ restore PC - ldr lr, [sp, #4] @ restore LR - ldr sp, [sp, #0] @ restore SP - mov pc, ip @ return + pop {r0-r11, ip, lr} @ restore r0 through r12 + ldr lr, [sp], #4 @ restore LR + ldr pc, [sp], #12 .endm
#ifdef CONFIG_FUNCTION_GRAPH_TRACER @@ -132,11 +126,9 @@ ftrace_graph_regs_call: bl prepare_ftrace_return
@ pop registers saved in ftrace_regs_caller - ldmia sp!, {r0-r12} @ restore r0 through r12 - ldr ip, [sp, #8] @ restore PC - ldr lr, [sp, #4] @ restore LR - ldr sp, [sp, #0] @ restore SP - mov pc, ip @ return + pop {r0-r11, ip, lr} @ restore r0 through r12 + ldr lr, [sp], #4 @ restore LR + ldr pc, [sp], #12
.endm #endif @@ -202,16 +194,17 @@ ftrace_graph_call\suffix: .endm
.macro mcount_exit - ldmia sp!, {r0-r3, ip, lr} - ret ip + ldmia sp!, {r0-r3} + ldr lr, [sp, #4] + ldr pc, [sp], #8 .endm
ENTRY(__gnu_mcount_nc) UNWIND(.fnstart) #ifdef CONFIG_DYNAMIC_FTRACE - mov ip, lr - ldmia sp!, {lr} - ret ip + push {lr} + ldr lr, [sp, #4] + ldr pc, [sp], #8 #else __mcount #endif
From: Jing Yao yao.jing2@zte.com.cn
[ Upstream commit f63658a59c3d439c8ad7b290f8ec270980e0f384 ]
Use sysfs_emit instead of scnprintf, snprintf or sprintf.
Reported-by: Zeal Robot zealci@zte.com.cn Signed-off-by: Jing Yao yao.jing2@zte.com.cn Signed-off-by: Helge Deller deller@gmx.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c index 4b0793abdd84..a2c7c5cb1523 100644 --- a/drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c +++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-dsi-cm.c @@ -409,7 +409,7 @@ static ssize_t dsicm_num_errors_show(struct device *dev, if (r) return r;
- return snprintf(buf, PAGE_SIZE, "%d\n", errors); + return sysfs_emit(buf, "%d\n", errors); }
static ssize_t dsicm_hw_revision_show(struct device *dev, @@ -439,7 +439,7 @@ static ssize_t dsicm_hw_revision_show(struct device *dev, if (r) return r;
- return snprintf(buf, PAGE_SIZE, "%02x.%02x.%02x\n", id1, id2, id3); + return sysfs_emit(buf, "%02x.%02x.%02x\n", id1, id2, id3); }
static ssize_t dsicm_store_ulps(struct device *dev, @@ -487,7 +487,7 @@ static ssize_t dsicm_show_ulps(struct device *dev, t = ddata->ulps_enabled; mutex_unlock(&ddata->lock);
- return snprintf(buf, PAGE_SIZE, "%u\n", t); + return sysfs_emit(buf, "%u\n", t); }
static ssize_t dsicm_store_ulps_timeout(struct device *dev, @@ -532,7 +532,7 @@ static ssize_t dsicm_show_ulps_timeout(struct device *dev, t = ddata->ulps_timeout; mutex_unlock(&ddata->lock);
- return snprintf(buf, PAGE_SIZE, "%u\n", t); + return sysfs_emit(buf, "%u\n", t); }
static DEVICE_ATTR(num_dsi_errors, S_IRUGO, dsicm_num_errors_show, NULL);
From: Jing Yao yao.jing2@zte.com.cn
[ Upstream commit c07a039cbb96748f54c02995bae8131cc9a73b0a ]
Use sysfs_emit instead of scnprintf, snprintf or sprintf.
Reported-by: Zeal Robot zealci@zte.com.cn Signed-off-by: Jing Yao yao.jing2@zte.com.cn Signed-off-by: Helge Deller deller@gmx.de Signed-off-by: Sasha Levin sashal@kernel.org --- .../video/fbdev/omap2/omapfb/displays/panel-tpo-td043mtea1.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td043mtea1.c b/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td043mtea1.c index bb85b21f0724..9f6ef9e04d9c 100644 --- a/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td043mtea1.c +++ b/drivers/video/fbdev/omap2/omapfb/displays/panel-tpo-td043mtea1.c @@ -169,7 +169,7 @@ static ssize_t tpo_td043_vmirror_show(struct device *dev, { struct panel_drv_data *ddata = dev_get_drvdata(dev);
- return snprintf(buf, PAGE_SIZE, "%d\n", ddata->vmirror); + return sysfs_emit(buf, "%d\n", ddata->vmirror); }
static ssize_t tpo_td043_vmirror_store(struct device *dev, @@ -199,7 +199,7 @@ static ssize_t tpo_td043_mode_show(struct device *dev, { struct panel_drv_data *ddata = dev_get_drvdata(dev);
- return snprintf(buf, PAGE_SIZE, "%d\n", ddata->mode); + return sysfs_emit(buf, "%d\n", ddata->mode); }
static ssize_t tpo_td043_mode_store(struct device *dev,
From: Jing Yao yao.jing2@zte.com.cn
[ Upstream commit 81a998288956d09d7a7a2303d47e4d60ad55c401 ]
Use sysfs_emit instead of scnprintf, snprintf or sprintf.
Reported-by: Zeal Robot zealci@zte.com.cn Signed-off-by: Jing Yao yao.jing2@zte.com.cn Signed-off-by: Helge Deller deller@gmx.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/video/fbdev/udlfb.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/video/fbdev/udlfb.c b/drivers/video/fbdev/udlfb.c index ecbfbbf1c1a7..e269b1391e14 100644 --- a/drivers/video/fbdev/udlfb.c +++ b/drivers/video/fbdev/udlfb.c @@ -1427,7 +1427,7 @@ static ssize_t metrics_bytes_rendered_show(struct device *fbdev, struct device_attribute *a, char *buf) { struct fb_info *fb_info = dev_get_drvdata(fbdev); struct dlfb_data *dlfb = fb_info->par; - return snprintf(buf, PAGE_SIZE, "%u\n", + return sysfs_emit(buf, "%u\n", atomic_read(&dlfb->bytes_rendered)); }
@@ -1435,7 +1435,7 @@ static ssize_t metrics_bytes_identical_show(struct device *fbdev, struct device_attribute *a, char *buf) { struct fb_info *fb_info = dev_get_drvdata(fbdev); struct dlfb_data *dlfb = fb_info->par; - return snprintf(buf, PAGE_SIZE, "%u\n", + return sysfs_emit(buf, "%u\n", atomic_read(&dlfb->bytes_identical)); }
@@ -1443,7 +1443,7 @@ static ssize_t metrics_bytes_sent_show(struct device *fbdev, struct device_attribute *a, char *buf) { struct fb_info *fb_info = dev_get_drvdata(fbdev); struct dlfb_data *dlfb = fb_info->par; - return snprintf(buf, PAGE_SIZE, "%u\n", + return sysfs_emit(buf, "%u\n", atomic_read(&dlfb->bytes_sent)); }
@@ -1451,7 +1451,7 @@ static ssize_t metrics_cpu_kcycles_used_show(struct device *fbdev, struct device_attribute *a, char *buf) { struct fb_info *fb_info = dev_get_drvdata(fbdev); struct dlfb_data *dlfb = fb_info->par; - return snprintf(buf, PAGE_SIZE, "%u\n", + return sysfs_emit(buf, "%u\n", atomic_read(&dlfb->cpu_kcycles_used)); }
From: Stephen Brennan stephen.s.brennan@oracle.com
[ Upstream commit 77498617857f68496b360081dde1a492d40c28b2 ]
This will be used help avoid deadlocks during panics. Although it would be better to include this in linux/panic.h, it would require that header to include linux/atomic.h as well. On some architectures, this results in a circular dependency as well. So instead add the helper directly to printk.c.
Suggested-by: Petr Mladek pmladek@suse.com Signed-off-by: Stephen Brennan stephen.s.brennan@oracle.com Reviewed-by: Petr Mladek pmladek@suse.com Reviewed-by: Sergey Senozhatsky senozhatsky@chromium.org Signed-off-by: Petr Mladek pmladek@suse.com Link: https://lore.kernel.org/r/20220202171821.179394-2-stephen.s.brennan@oracle.c... Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/printk/printk.c | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c index 23e26a203a9e..0989920e8cef 100644 --- a/kernel/printk/printk.c +++ b/kernel/printk/printk.c @@ -256,6 +256,11 @@ static void __up_console_sem(unsigned long ip) } #define up_console_sem() __up_console_sem(_RET_IP_)
+static bool panic_in_progress(void) +{ + return unlikely(atomic_read(&panic_cpu) != PANIC_CPU_INVALID); +} + /* * This is used for debugging the mess that is the VT code by * keeping track if we have the console semaphore held. It's
From: Shengjiu Wang shengjiu.wang@nxp.com
[ Upstream commit f7d344a2bd5ec81fbd1ce76928fd059e57ec9bea ]
In the case like dmaengine which's not a dai but as a component, the num_dai is zero, dmaengine component has the same component_of_node as cpu dai, when cpu dai component is not ready, but dmaengine component is ready, try to get cpu dai name, the snd_soc_get_dai_name() return -EINVAL, not -EPROBE_DEFER, that cause below error:
asoc-simple-card <card name>: parse error -22 asoc-simple-card: probe of <card name> failed with error -22
The sound card failed to probe.
So this patch fixes the issue above by skipping the zero num_dai component in searching dai name.
Signed-off-by: Shengjiu Wang shengjiu.wang@nxp.com Link: https://lore.kernel.org/r/1644491952-7457-1-git-send-email-shengjiu.wang@nxp... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/soc-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index c0e03cc8ea82..093ab32ea2c3 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -3362,7 +3362,7 @@ int snd_soc_get_dai_name(struct of_phandle_args *args, for_each_component(pos) { component_of_node = soc_component_to_node(pos);
- if (component_of_node != args->np) + if (component_of_node != args->np || !pos->num_dai) continue;
ret = snd_soc_component_of_xlate_dai_name(pos, args, dai_name);
From: John Ogness john.ogness@linutronix.de
[ Upstream commit 2ba3673d70178bf07fb75ff25c54bc478add4021 ]
The per-cpu @printk_pending variable can be updated from sleepable contexts, such as:
get_random_bytes() warn_unseeded_randomness() printk_deferred() defer_console_output()
and can be updated from interrupt contexts, such as:
handle_irq_event_percpu() __irq_wake_thread() wake_up_process() try_to_wake_up() select_task_rq() select_fallback_rq() printk_deferred() defer_console_output()
and can be updated from NMI contexts, such as:
vprintk() if (in_nmi()) defer_console_output()
Therefore the atomic variant of the updating functions must be used.
Replace __this_cpu_xchg() with this_cpu_xchg(). Replace __this_cpu_or() with this_cpu_or().
Reported-by: Sebastian Andrzej Siewior bigeasy@linutronix.de Signed-off-by: John Ogness john.ogness@linutronix.de Signed-off-by: Petr Mladek pmladek@suse.com Link: https://lore.kernel.org/r/87iltld4ue.fsf@jogness.linutronix.de Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/printk/printk.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c index 0989920e8cef..6a67d753485e 100644 --- a/kernel/printk/printk.c +++ b/kernel/printk/printk.c @@ -2990,7 +2990,7 @@ static DEFINE_PER_CPU(int, printk_pending);
static void wake_up_klogd_work_func(struct irq_work *irq_work) { - int pending = __this_cpu_xchg(printk_pending, 0); + int pending = this_cpu_xchg(printk_pending, 0);
if (pending & PRINTK_PENDING_OUTPUT) { /* If trylock fails, someone else is doing the printing */ @@ -3026,7 +3026,7 @@ void defer_console_output(void) return;
preempt_disable(); - __this_cpu_or(printk_pending, PRINTK_PENDING_OUTPUT); + this_cpu_or(printk_pending, PRINTK_PENDING_OUTPUT); irq_work_queue(this_cpu_ptr(&wake_up_klogd_work)); preempt_enable(); }
From: Daniel González Cabanelas dgcbueu@gmail.com
[ Upstream commit 56cb61f70e547e1b0cdfe6ff5a1f1ce6242e6d96 ]
Some cx88 video cards may have transport stream status interrupts set to 1 from cold start, causing errors like this:
cx88xx: cx88_print_irqbits: core:irq mpeg [0x100000] ts_err?* cx8802: cx8802_mpeg_irq: mpeg:general errors: 0x00100000
According to CX2388x datasheet, the interrupt status register should be cleared before enabling IRQs to stream video.
Fix it by clearing the Transport Stream Interrupt Status register.
Signed-off-by: Daniel González Cabanelas dgcbueu@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/pci/cx88/cx88-mpeg.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/media/pci/cx88/cx88-mpeg.c b/drivers/media/pci/cx88/cx88-mpeg.c index a57c991b165b..10d2971ef062 100644 --- a/drivers/media/pci/cx88/cx88-mpeg.c +++ b/drivers/media/pci/cx88/cx88-mpeg.c @@ -162,6 +162,9 @@ int cx8802_start_dma(struct cx8802_dev *dev, cx_write(MO_TS_GPCNTRL, GP_COUNT_CONTROL_RESET); q->count = 0;
+ /* clear interrupt status register */ + cx_write(MO_TS_INTSTAT, 0x1f1111); + /* enable irqs */ dprintk(1, "setting the interrupt mask\n"); cx_set(MO_PCI_INTMSK, core->pci_irqmask | PCI_INT_TSINT);
From: Richard Leitner richard.leitner@skidata.com
[ Upstream commit 0092c25b541a5422d7e71892a13c55ee91abc34b ]
This patch fixes the tristate configuration for i2c3 function assigned to the dtf pins on the Tamonten Tegra20 SoM.
Signed-off-by: Richard Leitner richard.leitner@skidata.com Signed-off-by: Thierry Reding treding@nvidia.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/tegra20-tamonten.dtsi | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi index 394a6b4dc69d..69cb65d86c46 100644 --- a/arch/arm/boot/dts/tegra20-tamonten.dtsi +++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi @@ -183,8 +183,8 @@ }; conf_ata { nvidia,pins = "ata", "atb", "atc", "atd", "ate", - "cdev1", "cdev2", "dap1", "dtb", "gma", - "gmb", "gmc", "gmd", "gme", "gpu7", + "cdev1", "cdev2", "dap1", "dtb", "dtf", + "gma", "gmb", "gmc", "gmd", "gme", "gpu7", "gpv", "i2cp", "irrx", "irtx", "pta", "rm", "slxa", "slxk", "spia", "spib", "uac"; @@ -203,7 +203,7 @@ }; conf_crtp { nvidia,pins = "crtp", "dap2", "dap3", "dap4", - "dtc", "dte", "dtf", "gpu", "sdio1", + "dtc", "dte", "gpu", "sdio1", "slxc", "slxd", "spdi", "spdo", "spig", "uda"; nvidia,pull = <TEGRA_PIN_PULL_NONE>;
From: Uwe Kleine-König u.kleine-koenig@pengutronix.de
[ Upstream commit 4036b29a146b2749af3bb213b003eb69f3e5ecc4 ]
Make sure in .probe() to set driver data before the function is left to make it possible in .remove() to undo the actions done.
This fixes a potential memory leak and stops returning an error code in .remove() that is ignored by the driver core anyhow.
Signed-off-by: Uwe Kleine-König u.kleine-koenig@pengutronix.de Reviewed-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Arnd Bergmann arnd@arndb.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/mach-mmp/sram.c | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-)
diff --git a/arch/arm/mach-mmp/sram.c b/arch/arm/mach-mmp/sram.c index 6794e2db1ad5..ecc46c31004f 100644 --- a/arch/arm/mach-mmp/sram.c +++ b/arch/arm/mach-mmp/sram.c @@ -72,6 +72,8 @@ static int sram_probe(struct platform_device *pdev) if (!info) return -ENOMEM;
+ platform_set_drvdata(pdev, info); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (res == NULL) { dev_err(&pdev->dev, "no memory resource defined\n"); @@ -107,8 +109,6 @@ static int sram_probe(struct platform_device *pdev) list_add(&info->node, &sram_bank_list); mutex_unlock(&sram_lock);
- platform_set_drvdata(pdev, info); - dev_info(&pdev->dev, "initialized\n"); return 0;
@@ -127,17 +127,19 @@ static int sram_remove(struct platform_device *pdev) struct sram_bank_info *info;
info = platform_get_drvdata(pdev); - if (info == NULL) - return -ENODEV;
- mutex_lock(&sram_lock); - list_del(&info->node); - mutex_unlock(&sram_lock); + if (info->sram_size) { + mutex_lock(&sram_lock); + list_del(&info->node); + mutex_unlock(&sram_lock); + + gen_pool_destroy(info->gpool); + iounmap(info->sram_virt); + kfree(info->pool_name); + }
- gen_pool_destroy(info->gpool); - iounmap(info->sram_virt); - kfree(info->pool_name); kfree(info); + return 0; }
From: Zheyu Ma zheyuma97@gmail.com
[ Upstream commit 4f01d09b2bbfbcb47b3eb305560a7f4857a32260 ]
When the sm712fb driver writes three bytes to the framebuffer, the driver will crash:
BUG: unable to handle page fault for address: ffffc90001ffffff RIP: 0010:smtcfb_write+0x454/0x5b0 Call Trace: vfs_write+0x291/0xd60 ? do_sys_openat2+0x27d/0x350 ? __fget_light+0x54/0x340 ksys_write+0xce/0x190 do_syscall_64+0x43/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae
Fix it by removing the open-coded endianness fixup-code.
Signed-off-by: Zheyu Ma zheyuma97@gmail.com Signed-off-by: Helge Deller deller@gmx.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/video/fbdev/sm712fb.c | 21 ++++----------------- 1 file changed, 4 insertions(+), 17 deletions(-)
diff --git a/drivers/video/fbdev/sm712fb.c b/drivers/video/fbdev/sm712fb.c index 246681414577..86ce99de5f27 100644 --- a/drivers/video/fbdev/sm712fb.c +++ b/drivers/video/fbdev/sm712fb.c @@ -1130,7 +1130,7 @@ static ssize_t smtcfb_write(struct fb_info *info, const char __user *buf, count = total_size - p; }
- buffer = kmalloc((count > PAGE_SIZE) ? PAGE_SIZE : count, GFP_KERNEL); + buffer = kmalloc(PAGE_SIZE, GFP_KERNEL); if (!buffer) return -ENOMEM;
@@ -1148,24 +1148,11 @@ static ssize_t smtcfb_write(struct fb_info *info, const char __user *buf, break; }
- for (i = c >> 2; i--;) { - fb_writel(big_swap(*src), dst++); + for (i = (c + 3) >> 2; i--;) { + fb_writel(big_swap(*src), dst); + dst++; src++; } - if (c & 3) { - u8 *src8 = (u8 *)src; - u8 __iomem *dst8 = (u8 __iomem *)dst; - - for (i = c & 3; i--;) { - if (i & 1) { - fb_writeb(*src8++, ++dst8); - } else { - fb_writeb(*src8++, --dst8); - dst8 += 2; - } - } - dst = (u32 __iomem *)dst8; - }
*ppos += c; buf += c;
From: Pavel Skripkin paskripkin@gmail.com
[ Upstream commit fde18c3bac3f964d8333ae53b304d8fee430502b ]
This reverts commit 2c98b8a3458df03abdc6945bbef67ef91d181938.
Reverted patch causes problems with Hauppauge WinTV dualHD as Maximilian reported [1]. Since quick solution didn't come up let's just revert it to make this device work with upstream kernels.
Link: https://lore.kernel.org/all/6a72a37b-e972-187d-0322-16336e12bdc5@elbmurf.de/ [1]
Reported-by: Maximilian Böhm maximilian.boehm@elbmurf.de Tested-by: Maximilian Böhm maximilian.boehm@elbmurf.de Signed-off-by: Pavel Skripkin paskripkin@gmail.com Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Mauro Carvalho Chehab mchehab@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/usb/em28xx/em28xx-cards.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/drivers/media/usb/em28xx/em28xx-cards.c b/drivers/media/usb/em28xx/em28xx-cards.c index bfca9d0a1fe1..64f2033c2731 100644 --- a/drivers/media/usb/em28xx/em28xx-cards.c +++ b/drivers/media/usb/em28xx/em28xx-cards.c @@ -4035,11 +4035,8 @@ static void em28xx_usb_disconnect(struct usb_interface *intf)
em28xx_close_extension(dev);
- if (dev->dev_next) { - em28xx_close_extension(dev->dev_next); + if (dev->dev_next) em28xx_release_resources(dev->dev_next); - } - em28xx_release_resources(dev);
if (dev->dev_next) {
From: Dongliang Mu mudongliangabcd@gmail.com
[ Upstream commit 07922937e9a580825f9965c46fd15e23ba5754b6 ]
hdpvr_register_videodev is responsible to initialize a worker in hdpvr_device. However, the worker is only initialized at hdpvr_start_streaming other than hdpvr_register_videodev. When hdpvr_probe does not initialize its worker, the hdpvr_disconnect will encounter one WARN in flush_work.The stack trace is as follows:
hdpvr_disconnect+0xb8/0xf2 drivers/media/usb/hdpvr/hdpvr-core.c:425 usb_unbind_interface+0xbf/0x3a0 drivers/usb/core/driver.c:458 __device_release_driver drivers/base/dd.c:1206 [inline] device_release_driver_internal+0x22a/0x230 drivers/base/dd.c:1237 bus_remove_device+0x108/0x160 drivers/base/bus.c:529 device_del+0x1fe/0x510 drivers/base/core.c:3592 usb_disable_device+0xd1/0x1d0 drivers/usb/core/message.c:1419 usb_disconnect+0x109/0x330 drivers/usb/core/hub.c:2228
Fix this by moving the initialization of dev->worker to the starting of hdpvr_register_videodev
Reported-by: syzkaller syzkaller@googlegroups.com Signed-off-by: Dongliang Mu mudongliangabcd@gmail.com Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Mauro Carvalho Chehab mchehab@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/usb/hdpvr/hdpvr-video.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/media/usb/hdpvr/hdpvr-video.c b/drivers/media/usb/hdpvr/hdpvr-video.c index bad71d863d39..7849f1fbbcc4 100644 --- a/drivers/media/usb/hdpvr/hdpvr-video.c +++ b/drivers/media/usb/hdpvr/hdpvr-video.c @@ -308,7 +308,6 @@ static int hdpvr_start_streaming(struct hdpvr_device *dev)
dev->status = STATUS_STREAMING;
- INIT_WORK(&dev->worker, hdpvr_transmit_buffers); schedule_work(&dev->worker);
v4l2_dbg(MSG_BUFFER, hdpvr_debug, &dev->v4l2_dev, @@ -1165,6 +1164,9 @@ int hdpvr_register_videodev(struct hdpvr_device *dev, struct device *parent, bool ac3 = dev->flags & HDPVR_FLAG_AC3_CAP; int res;
+ // initialize dev->worker + INIT_WORK(&dev->worker, hdpvr_transmit_buffers); + dev->cur_std = V4L2_STD_525_60; dev->width = 720; dev->height = 480;
From: "Steven Rostedt (Google)" rostedt@goodmis.org
[ Upstream commit b3bc8547d3be60898818885f5bf22d0a62e2eb48 ]
The macro TRACE_DEFINE_ENUM is used to convert enums in the kernel to their actual value when they are exported to user space via the trace event format file.
Currently only the enums in the "print fmt" (TP_printk in the TRACE_EVENT macro) have the enums converted. But the enums can be used to denote array size:
field:unsigned int fc_ineligible_rc[EXT4_FC_REASON_MAX]; offset:12; size:36; signed:0;
The EXT4_FC_REASON_MAX has no meaning to userspace but it needs to know that information to know how to parse the array.
Have the array indexes also be parsed as well.
Link: https://lore.kernel.org/all/cover.1646922487.git.riteshh@linux.ibm.com/
Reported-by: Ritesh Harjani riteshh@linux.ibm.com Tested-by: Ritesh Harjani riteshh@linux.ibm.com Signed-off-by: Steven Rostedt (Google) rostedt@goodmis.org Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/trace/trace_events.c | 28 ++++++++++++++++++++++++++++ 1 file changed, 28 insertions(+)
diff --git a/kernel/trace/trace_events.c b/kernel/trace/trace_events.c index 4acc77e049e5..c1363f9d8d48 100644 --- a/kernel/trace/trace_events.c +++ b/kernel/trace/trace_events.c @@ -2202,6 +2202,33 @@ static void update_event_printk(struct trace_event_call *call, } }
+static void update_event_fields(struct trace_event_call *call, + struct trace_eval_map *map) +{ + struct ftrace_event_field *field; + struct list_head *head; + char *ptr; + int len = strlen(map->eval_string); + + head = trace_get_fields(call); + list_for_each_entry(field, head, link) { + ptr = strchr(field->type, '['); + if (!ptr) + continue; + ptr++; + + if (!isalpha(*ptr) && *ptr != '_') + continue; + + if (strncmp(map->eval_string, ptr, len) != 0) + continue; + + ptr = eval_replace(ptr, map, len); + /* enum/sizeof string smaller than value */ + WARN_ON_ONCE(!ptr); + } +} + void trace_event_eval_update(struct trace_eval_map **map, int len) { struct trace_event_call *call, *p; @@ -2237,6 +2264,7 @@ void trace_event_eval_update(struct trace_eval_map **map, int len) first = false; } update_event_printk(call, map[i]); + update_event_fields(call, map[i]); } } }
From: Ulf Hansson ulf.hansson@linaro.org
[ Upstream commit d6c9219ca1139b74541b2a98cee47a3426d754a9 ]
Even if the current WARN() notifies the user that something is severely wrong, we can still end up in a PANIC() when trying to invoke the missing ->enable_sdio_irq() ops. Therefore, let's also return an error code and prevent the host from being added.
While at it, move the code into a separate function to prepare for subsequent changes and for further host caps validations.
Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Link: https://lore.kernel.org/r/20220303165142.129745-1-ulf.hansson@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mmc/core/host.c | 15 +++++++++++++-- 1 file changed, 13 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index e955f1ef2564..32801639e0be 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c @@ -497,6 +497,16 @@ struct mmc_host *mmc_alloc_host(int extra, struct device *dev)
EXPORT_SYMBOL(mmc_alloc_host);
+static int mmc_validate_host_caps(struct mmc_host *host) +{ + if (host->caps & MMC_CAP_SDIO_IRQ && !host->ops->enable_sdio_irq) { + dev_warn(host->parent, "missing ->enable_sdio_irq() ops\n"); + return -EINVAL; + } + + return 0; +} + /** * mmc_add_host - initialise host hardware * @host: mmc host @@ -509,8 +519,9 @@ int mmc_add_host(struct mmc_host *host) { int err;
- WARN_ON((host->caps & MMC_CAP_SDIO_IRQ) && - !host->ops->enable_sdio_irq); + err = mmc_validate_host_caps(host); + if (err) + return err;
err = device_add(&host->class_dev); if (err)
From: Minghao Chi chi.minghao@zte.com.cn
[ Upstream commit 835ca59799f5c60b4b54bdc7aa785c99552f63e4 ]
Use of_device_get_match_data() to simplify the code.
Reported-by: Zeal Robot zealci@zte.com.cn Signed-off-by: Minghao Chi chi.minghao@zte.com.cn Link: https://lore.kernel.org/r/20220315023226.2118354-1-chi.minghao@zte.com.cn Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/ak4613.c | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-)
diff --git a/sound/soc/codecs/ak4613.c b/sound/soc/codecs/ak4613.c index c1181a20714d..f508e8bdef3b 100644 --- a/sound/soc/codecs/ak4613.c +++ b/sound/soc/codecs/ak4613.c @@ -642,15 +642,10 @@ static int ak4613_i2c_probe(struct i2c_client *i2c, struct ak4613_priv *priv;
regmap_cfg = NULL; - if (np) { - const struct of_device_id *of_id; - - of_id = of_match_device(ak4613_of_match, dev); - if (of_id) - regmap_cfg = of_id->data; - } else { + if (np) + regmap_cfg = of_device_get_match_data(dev); + else regmap_cfg = (const struct regmap_config *)id->driver_data; - }
if (!regmap_cfg) return -EINVAL;
From: Matt Kramer mccleetus@gmail.com
[ Upstream commit ef248d9bd616b04df8be25539a4dc5db4b6c56f4 ]
This fixes the near-silence of the headphone jack on the ALC256-based Samsung Galaxy Book Flex Alpha (NP730QCJ). The magic verbs were found through trial and error, using known ALC298 hacks as inspiration. The fixup is auto-enabled only when the NP730QCJ is detected. It can be manually enabled using model=alc256-samsung-headphone.
Signed-off-by: Matt Kramer mccleetus@gmail.com Link: https://lore.kernel.org/r/3168355.aeNJFYEL58@linus Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- Documentation/sound/hd-audio/models.rst | 4 ++++ sound/pci/hda/patch_realtek.c | 11 +++++++++++ 2 files changed, 15 insertions(+)
diff --git a/Documentation/sound/hd-audio/models.rst b/Documentation/sound/hd-audio/models.rst index 0ea967d34583..4c91abad7b35 100644 --- a/Documentation/sound/hd-audio/models.rst +++ b/Documentation/sound/hd-audio/models.rst @@ -261,6 +261,10 @@ alc-sense-combo huawei-mbx-stereo Enable initialization verbs for Huawei MBX stereo speakers; might be risky, try this at your own risk +alc298-samsung-headphone + Samsung laptops with ALC298 +alc256-samsung-headphone + Samsung laptops with ALC256
ALC66x/67x/892 ============== diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index d201043d661c..d652d0b84d8b 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6456,6 +6456,7 @@ enum { ALC285_FIXUP_HP_MUTE_LED, ALC236_FIXUP_HP_MUTE_LED, ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET, + ALC256_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET, ALC295_FIXUP_ASUS_MIC_NO_PRESENCE, ALC269VC_FIXUP_ACER_VCOPPERBOX_PINS, ALC269VC_FIXUP_ACER_HEADSET_MIC, @@ -7740,6 +7741,14 @@ static const struct hda_fixup alc269_fixups[] = { { } }, }, + [ALC256_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET] = { + .type = HDA_FIXUP_VERBS, + .v.verbs = (const struct hda_verb[]) { + { 0x20, AC_VERB_SET_COEF_INDEX, 0x08}, + { 0x20, AC_VERB_SET_PROC_COEF, 0x2fcf}, + { } + }, + }, [ALC295_FIXUP_ASUS_MIC_NO_PRESENCE] = { .type = HDA_FIXUP_PINS, .v.pins = (const struct hda_pintbl[]) { @@ -8217,6 +8226,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x144d, 0xc740, "Samsung Ativ book 8 (NP870Z5G)", ALC269_FIXUP_ATIV_BOOK_8), SND_PCI_QUIRK(0x144d, 0xc812, "Samsung Notebook Pen S (NT950SBE-X58)", ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET), SND_PCI_QUIRK(0x144d, 0xc830, "Samsung Galaxy Book Ion (NT950XCJ-X716A)", ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET), + SND_PCI_QUIRK(0x144d, 0xc832, "Samsung Galaxy Book Flex Alpha (NP730QCJ)", ALC256_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET), SND_PCI_QUIRK(0x1458, 0xfa53, "Gigabyte BXBT-2807", ALC283_FIXUP_HEADSET_MIC), SND_PCI_QUIRK(0x1462, 0xb120, "MSI Cubi MS-B120", ALC283_FIXUP_HEADSET_MIC), SND_PCI_QUIRK(0x1462, 0xb171, "Cubi N 8GL (MS-B171)", ALC283_FIXUP_HEADSET_MIC), @@ -8540,6 +8550,7 @@ static const struct hda_model_fixup alc269_fixup_models[] = { {.id = ALC298_FIXUP_HUAWEI_MBX_STEREO, .name = "huawei-mbx-stereo"}, {.id = ALC256_FIXUP_MEDION_HEADSET_NO_PRESENCE, .name = "alc256-medion-headset"}, {.id = ALC298_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET, .name = "alc298-samsung-headphone"}, + {.id = ALC256_FIXUP_SAMSUNG_HEADPHONE_VERY_QUIET, .name = "alc256-samsung-headphone"}, {.id = ALC255_FIXUP_XIAOMI_HEADSET_MIC, .name = "alc255-xiaomi-headset"}, {.id = ALC274_FIXUP_HP_MIC, .name = "alc274-hp-mic-detect"}, {.id = ALC295_FIXUP_HP_OMEN, .name = "alc295-hp-omen"},
linux-stable-mirror@lists.linaro.org
-
Sasha Levin