From: Vasant Hegde vasant.hegde@amd.com

[ Upstream commit 080920e52148b4fbbf9360d5345fdcd7846e4841 ]

Current code throws kernel warning if it fails to enable pasid/pri [1]. Do not call pci_disable_[pasid/pri] if pci_enable_[pasid/pri] failed.

[1] https://lore.kernel.org/linux-iommu/15d0f9ff-2a56-b3e9-5b45-e6b23300ae3b@lee...

Reported-by: Matt Fagnani matt.fagnani@bell.net Signed-off-by: Vasant Hegde vasant.hegde@amd.com Reviewed-by: Suravee Suthikulpanit suravee.suthikulpanit@amd.com Link: https://lore.kernel.org/r/20230111121503.5931-1-vasant.hegde@amd.com Signed-off-by: Joerg Roedel jroedel@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iommu/amd/iommu.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/drivers/iommu/amd/iommu.c b/drivers/iommu/amd/iommu.c index cbeaab55c0dbc..2f8c018e1ffd7 100644 --- a/drivers/iommu/amd/iommu.c +++ b/drivers/iommu/amd/iommu.c @@ -1702,27 +1702,29 @@ static int pdev_pri_ats_enable(struct pci_dev *pdev) /* Only allow access to user-accessible pages */ ret = pci_enable_pasid(pdev, 0); if (ret) - goto out_err; + return ret;

/* First reset the PRI state of the device */ ret = pci_reset_pri(pdev); if (ret) - goto out_err; + goto out_err_pasid;

/* Enable PRI */ /* FIXME: Hardcode number of outstanding requests for now */ ret = pci_enable_pri(pdev, 32); if (ret) - goto out_err; + goto out_err_pasid;

ret = pci_enable_ats(pdev, PAGE_SHIFT); if (ret) - goto out_err; + goto out_err_pri;

return 0;

-out_err: +out_err_pri: pci_disable_pri(pdev); + +out_err_pasid: pci_disable_pasid(pdev);

return ret;

From: Laurent Pinchart laurent.pinchart@ideasonboard.com

[ Upstream commit 50459f103edfe47c9a599d766a850ef6014936c5 ]

The V4L2 core overwrites format descriptions in v4l_fill_fmtdesc(), there's no need to manually set the descriptions in the driver. This prepares for removal of the format descriptions from the uvc_fmts table.

Unlike V4L2, UVC makes a distinction between the SD-DV, SDL-DV and HD-DV formats. It also indicates whether the DV format uses 50Hz or 60Hz. This information is parsed by the driver to construct a format name string that is printed in a debug message, but serves no other purpose as V4L2 has a single V4L2_PIX_FMT_DV pixel format that covers all those cases.

As the information is available in the UVC descriptors, and thus accessible to users with lsusb if they really care, don't log it in a debug message and drop the format name string to simplify the code.

Signed-off-by: Laurent Pinchart laurent.pinchart@ideasonboard.com Reviewed-by: Ricardo Ribalda ribalda@chromium.org Reviewed-by: Michael Grzeschik m.grzeschik@pengutronix.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/usb/uvc/uvc_driver.c | 24 ++---------------------- drivers/media/usb/uvc/uvc_v4l2.c | 2 -- drivers/media/usb/uvc/uvcvideo.h | 2 -- 3 files changed, 2 insertions(+), 26 deletions(-)

diff --git a/drivers/media/usb/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c index e4bcb50113607..0a35d7c0d0a0a 100644 --- a/drivers/media/usb/uvc/uvc_driver.c +++ b/drivers/media/usb/uvc/uvc_driver.c @@ -251,14 +251,10 @@ static int uvc_parse_format(struct uvc_device *dev, fmtdesc = uvc_format_by_guid(&buffer[5]);

if (fmtdesc != NULL) { - strscpy(format->name, fmtdesc->name, - sizeof(format->name)); format->fcc = fmtdesc->fcc; } else { dev_info(&streaming->intf->dev, "Unknown video format %pUl\n", &buffer[5]); - snprintf(format->name, sizeof(format->name), "%pUl\n", - &buffer[5]); format->fcc = 0; }

@@ -270,8 +266,6 @@ static int uvc_parse_format(struct uvc_device *dev, */ if (dev->quirks & UVC_QUIRK_FORCE_Y8) { if (format->fcc == V4L2_PIX_FMT_YUYV) { - strscpy(format->name, "Greyscale 8-bit (Y8 )", - sizeof(format->name)); format->fcc = V4L2_PIX_FMT_GREY; format->bpp = 8; width_multiplier = 2; @@ -312,7 +306,6 @@ static int uvc_parse_format(struct uvc_device *dev, return -EINVAL; }

- strscpy(format->name, "MJPEG", sizeof(format->name)); format->fcc = V4L2_PIX_FMT_MJPEG; format->flags = UVC_FMT_FLAG_COMPRESSED; format->bpp = 0; @@ -328,17 +321,7 @@ static int uvc_parse_format(struct uvc_device *dev, return -EINVAL; }

- switch (buffer[8] & 0x7f) { - case 0: - strscpy(format->name, "SD-DV", sizeof(format->name)); - break; - case 1: - strscpy(format->name, "SDL-DV", sizeof(format->name)); - break; - case 2: - strscpy(format->name, "HD-DV", sizeof(format->name)); - break; - default: + if ((buffer[8] & 0x7f) > 2) { uvc_dbg(dev, DESCR, "device %d videostreaming interface %d: unknown DV format %u\n", dev->udev->devnum, @@ -346,9 +329,6 @@ static int uvc_parse_format(struct uvc_device *dev, return -EINVAL; }

- strlcat(format->name, buffer[8] & (1 << 7) ? " 60Hz" : " 50Hz", - sizeof(format->name)); - format->fcc = V4L2_PIX_FMT_DV; format->flags = UVC_FMT_FLAG_COMPRESSED | UVC_FMT_FLAG_STREAM; format->bpp = 0; @@ -375,7 +355,7 @@ static int uvc_parse_format(struct uvc_device *dev, return -EINVAL; }

- uvc_dbg(dev, DESCR, "Found format %s\n", format->name); + uvc_dbg(dev, DESCR, "Found format %p4cc", &format->fcc);

buflen -= buffer[0]; buffer += buffer[0]; diff --git a/drivers/media/usb/uvc/uvc_v4l2.c b/drivers/media/usb/uvc/uvc_v4l2.c index f4d4c33b6dfbd..dcd178d249b6b 100644 --- a/drivers/media/usb/uvc/uvc_v4l2.c +++ b/drivers/media/usb/uvc/uvc_v4l2.c @@ -660,8 +660,6 @@ static int uvc_ioctl_enum_fmt(struct uvc_streaming *stream, fmt->flags = 0; if (format->flags & UVC_FMT_FLAG_COMPRESSED) fmt->flags |= V4L2_FMT_FLAG_COMPRESSED; - strscpy(fmt->description, format->name, sizeof(fmt->description)); - fmt->description[sizeof(fmt->description) - 1] = 0; fmt->pixelformat = format->fcc; return 0; } diff --git a/drivers/media/usb/uvc/uvcvideo.h b/drivers/media/usb/uvc/uvcvideo.h index df93db259312e..b60e4ae95e815 100644 --- a/drivers/media/usb/uvc/uvcvideo.h +++ b/drivers/media/usb/uvc/uvcvideo.h @@ -264,8 +264,6 @@ struct uvc_format { u32 fcc; u32 flags;

- char name[32]; - unsigned int nframes; struct uvc_frame *frame; };

From: Guenter Roeck linux@roeck-us.net

[ Upstream commit 4867bb590ae445bcfaa711a86b603c97e94574b3 ]

On a Webcam from Quanta, we see the following error.

usb 3-5: New USB device found, idVendor=0408, idProduct=30d2, bcdDevice= 0.03 usb 3-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2 usb 3-5: Product: USB2.0 HD UVC WebCam usb 3-5: Manufacturer: Quanta usb 3-5: SerialNumber: 0x0001 ... uvcvideo: Found UVC 1.10 device USB2.0 HD UVC WebCam (0408:30d2) uvcvideo: Failed to initialize entity for entity 5 uvcvideo: Failed to register entities (-22).

The Webcam reports an entity of type UVC_VC_EXTENSION_UNIT. It reports a string index of '7' associated with that entity. The attempt to read that string from the camera fails with error -32 (-EPIPE). usb_string() returns that error, but it is ignored. As result, the entity name is empty. This later causes v4l2_device_register_subdev() to return -EINVAL, and no entities are registered as result.

While this appears to be a firmware problem with the camera, the kernel should still handle the situation gracefully. To do that, check the return value from usb_string(). If it reports an error, assign the entity's default name.

Signed-off-by: Guenter Roeck linux@roeck-us.net Reviewed-by: Laurent Pinchart laurent.pinchart@ideasonboard.com Signed-off-by: Laurent Pinchart laurent.pinchart@ideasonboard.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/usb/uvc/uvc_driver.c | 48 ++++++++++++------------------ 1 file changed, 19 insertions(+), 29 deletions(-)

diff --git a/drivers/media/usb/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c index 0a35d7c0d0a0a..4c372965517d6 100644 --- a/drivers/media/usb/uvc/uvc_driver.c +++ b/drivers/media/usb/uvc/uvc_driver.c @@ -859,10 +859,8 @@ static int uvc_parse_vendor_control(struct uvc_device *dev, + n; memcpy(unit->extension.bmControls, &buffer[23+p], 2*n);

- if (buffer[24+p+2*n] != 0) - usb_string(udev, buffer[24+p+2*n], unit->name, - sizeof(unit->name)); - else + if (buffer[24+p+2*n] == 0 || + usb_string(udev, buffer[24+p+2*n], unit->name, sizeof(unit->name)) < 0) sprintf(unit->name, "Extension %u", buffer[3]);

list_add_tail(&unit->list, &dev->entities); @@ -986,15 +984,15 @@ static int uvc_parse_standard_control(struct uvc_device *dev, memcpy(term->media.bmTransportModes, &buffer[10+n], p); }

- if (buffer[7] != 0) - usb_string(udev, buffer[7], term->name, - sizeof(term->name)); - else if (UVC_ENTITY_TYPE(term) == UVC_ITT_CAMERA) - sprintf(term->name, "Camera %u", buffer[3]); - else if (UVC_ENTITY_TYPE(term) == UVC_ITT_MEDIA_TRANSPORT_INPUT) - sprintf(term->name, "Media %u", buffer[3]); - else - sprintf(term->name, "Input %u", buffer[3]); + if (buffer[7] == 0 || + usb_string(udev, buffer[7], term->name, sizeof(term->name)) < 0) { + if (UVC_ENTITY_TYPE(term) == UVC_ITT_CAMERA) + sprintf(term->name, "Camera %u", buffer[3]); + if (UVC_ENTITY_TYPE(term) == UVC_ITT_MEDIA_TRANSPORT_INPUT) + sprintf(term->name, "Media %u", buffer[3]); + else + sprintf(term->name, "Input %u", buffer[3]); + }

list_add_tail(&term->list, &dev->entities); break; @@ -1027,10 +1025,8 @@ static int uvc_parse_standard_control(struct uvc_device *dev,

memcpy(term->baSourceID, &buffer[7], 1);

- if (buffer[8] != 0) - usb_string(udev, buffer[8], term->name, - sizeof(term->name)); - else + if (buffer[8] == 0 || + usb_string(udev, buffer[8], term->name, sizeof(term->name)) < 0) sprintf(term->name, "Output %u", buffer[3]);

list_add_tail(&term->list, &dev->entities); @@ -1052,10 +1048,8 @@ static int uvc_parse_standard_control(struct uvc_device *dev,

memcpy(unit->baSourceID, &buffer[5], p);

- if (buffer[5+p] != 0) - usb_string(udev, buffer[5+p], unit->name, - sizeof(unit->name)); - else + if (buffer[5+p] == 0 || + usb_string(udev, buffer[5+p], unit->name, sizeof(unit->name)) < 0) sprintf(unit->name, "Selector %u", buffer[3]);

list_add_tail(&unit->list, &dev->entities); @@ -1085,10 +1079,8 @@ static int uvc_parse_standard_control(struct uvc_device *dev, if (dev->uvc_version >= 0x0110) unit->processing.bmVideoStandards = buffer[9+n];

- if (buffer[8+n] != 0) - usb_string(udev, buffer[8+n], unit->name, - sizeof(unit->name)); - else + if (buffer[8+n] == 0 || + usb_string(udev, buffer[8+n], unit->name, sizeof(unit->name)) < 0) sprintf(unit->name, "Processing %u", buffer[3]);

list_add_tail(&unit->list, &dev->entities); @@ -1116,10 +1108,8 @@ static int uvc_parse_standard_control(struct uvc_device *dev, unit->extension.bmControls = (u8 *)unit + sizeof(*unit); memcpy(unit->extension.bmControls, &buffer[23+p], n);

- if (buffer[23+p+n] != 0) - usb_string(udev, buffer[23+p+n], unit->name, - sizeof(unit->name)); - else + if (buffer[23+p+n] == 0 || + usb_string(udev, buffer[23+p+n], unit->name, sizeof(unit->name)) < 0) sprintf(unit->name, "Extension %u", buffer[3]);

list_add_tail(&unit->list, &dev->entities);

From: Kees Cook keescook@chromium.org

[ Upstream commit b839212988575c701aab4d3d9ca15e44c87e383c ]

The memcpy() in uvc_video_decode_meta() intentionally copies across the length and flags members and into the trailing buf flexible array. Split the copy so that the compiler can better reason about (the lack of) buffer overflows here. Avoid the run-time false positive warning:

memcpy: detected field-spanning write (size 12) of single field "&meta->length" at drivers/media/usb/uvc/uvc_video.c:1355 (size 1)

Additionally fix a typo in the documentation for struct uvc_meta_buf.

Reported-by: ionut_n2001@yahoo.com Link: https://bugzilla.kernel.org/show_bug.cgi?id=216810 Signed-off-by: Kees Cook keescook@chromium.org Reviewed-by: Laurent Pinchart laurent.pinchart@ideasonboard.com Signed-off-by: Laurent Pinchart laurent.pinchart@ideasonboard.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/usb/uvc/uvc_video.c | 4 +++- include/uapi/linux/uvcvideo.h | 2 +- 2 files changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c index 53ea225972478..0d3a3b697b2d8 100644 --- a/drivers/media/usb/uvc/uvc_video.c +++ b/drivers/media/usb/uvc/uvc_video.c @@ -1352,7 +1352,9 @@ static void uvc_video_decode_meta(struct uvc_streaming *stream, if (has_scr) memcpy(stream->clock.last_scr, scr, 6);

- memcpy(&meta->length, mem, length); + meta->length = mem[0]; + meta->flags = mem[1]; + memcpy(meta->buf, &mem[2], length - 2); meta_buf->bytesused += length + sizeof(meta->ns) + sizeof(meta->sof);

uvc_dbg(stream->dev, FRAME, diff --git a/include/uapi/linux/uvcvideo.h b/include/uapi/linux/uvcvideo.h index 8288137387c0d..a9d0a64007ba5 100644 --- a/include/uapi/linux/uvcvideo.h +++ b/include/uapi/linux/uvcvideo.h @@ -86,7 +86,7 @@ struct uvc_xu_control_query { * struct. The first two fields are added by the driver, they can be used for * clock synchronisation. The rest is an exact copy of a UVC payload header. * Only complete objects with complete buffers are included. Therefore it's - * always sizeof(meta->ts) + sizeof(meta->sof) + meta->length bytes large. + * always sizeof(meta->ns) + sizeof(meta->sof) + meta->length bytes large. */ struct uvc_meta_buf { __u64 ns;

From: Yong-Xuan Wang yongxuan.wang@sifive.com

[ Upstream commit 198102c9103fc78d8478495971947af77edb05c1 ]

The cacheinfo sets up the shared_cpu_map by checking whether the caches with the same index are shared between CPUs. However, this will trigger slab-out-of-bounds access if the CPUs do not have the same cache hierarchy. Another problem is the mismatched shared_cpu_map when the shared cache does not have the same index between CPUs.

CPU0 I D L3 index 0 1 2 x ^ ^ ^ ^ index 0 1 2 3 CPU1 I D L2 L3

This patch checks each cache is shared with all caches on other CPUs.

Reviewed-by: Pierre Gondois pierre.gondois@arm.com Signed-off-by: Yong-Xuan Wang yongxuan.wang@sifive.com Link: https://lore.kernel.org/r/20230117105133.4445-2-yongxuan.wang@sifive.com Signed-off-by: Sudeep Holla sudeep.holla@arm.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/base/cacheinfo.c | 27 +++++++++++++++++---------- 1 file changed, 17 insertions(+), 10 deletions(-)

diff --git a/drivers/base/cacheinfo.c b/drivers/base/cacheinfo.c index 950b22cdb5f7c..f05acf3c16c6b 100644 --- a/drivers/base/cacheinfo.c +++ b/drivers/base/cacheinfo.c @@ -256,7 +256,7 @@ static int cache_shared_cpu_map_setup(unsigned int cpu) { struct cpu_cacheinfo *this_cpu_ci = get_cpu_cacheinfo(cpu); struct cacheinfo *this_leaf, *sib_leaf; - unsigned int index; + unsigned int index, sib_index; int ret = 0;

if (this_cpu_ci->cpu_map_populated) @@ -284,11 +284,13 @@ static int cache_shared_cpu_map_setup(unsigned int cpu)

if (i == cpu || !sib_cpu_ci->info_list) continue;/* skip if itself or no cacheinfo */ - - sib_leaf = per_cpu_cacheinfo_idx(i, index); - if (cache_leaves_are_shared(this_leaf, sib_leaf)) { - cpumask_set_cpu(cpu, &sib_leaf->shared_cpu_map); - cpumask_set_cpu(i, &this_leaf->shared_cpu_map); + for (sib_index = 0; sib_index < cache_leaves(i); sib_index++) { + sib_leaf = per_cpu_cacheinfo_idx(i, sib_index); + if (cache_leaves_are_shared(this_leaf, sib_leaf)) { + cpumask_set_cpu(cpu, &sib_leaf->shared_cpu_map); + cpumask_set_cpu(i, &this_leaf->shared_cpu_map); + break; + } } } /* record the maximum cache line size */ @@ -302,7 +304,7 @@ static int cache_shared_cpu_map_setup(unsigned int cpu) static void cache_shared_cpu_map_remove(unsigned int cpu) { struct cacheinfo *this_leaf, *sib_leaf; - unsigned int sibling, index; + unsigned int sibling, index, sib_index;

for (index = 0; index < cache_leaves(cpu); index++) { this_leaf = per_cpu_cacheinfo_idx(cpu, index); @@ -313,9 +315,14 @@ static void cache_shared_cpu_map_remove(unsigned int cpu) if (sibling == cpu || !sib_cpu_ci->info_list) continue;/* skip if itself or no cacheinfo */

- sib_leaf = per_cpu_cacheinfo_idx(sibling, index); - cpumask_clear_cpu(cpu, &sib_leaf->shared_cpu_map); - cpumask_clear_cpu(sibling, &this_leaf->shared_cpu_map); + for (sib_index = 0; sib_index < cache_leaves(sibling); sib_index++) { + sib_leaf = per_cpu_cacheinfo_idx(sibling, sib_index); + if (cache_leaves_are_shared(this_leaf, sib_leaf)) { + cpumask_clear_cpu(cpu, &sib_leaf->shared_cpu_map); + cpumask_clear_cpu(sibling, &this_leaf->shared_cpu_map); + break; + } + } } } }

From: Anand Moon linux.amoon@gmail.com

[ Upstream commit b72654148e34c181f532275d03ef6f37de288f24 ]

Add usb hub device id for Genesys Logic, Inc. GL852G Hub USB 2.0 root hub.

Signed-off-by: Anand Moon linux.amoon@gmail.com Acked-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org Link: https://lore.kernel.org/r/20230118044418.875-2-linux.amoon@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- Documentation/devicetree/bindings/usb/genesys,gl850g.yaml | 1 + 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml index a9f831448ccae..cc4cf92b70d18 100644 --- a/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml +++ b/Documentation/devicetree/bindings/usb/genesys,gl850g.yaml @@ -16,6 +16,7 @@ properties: compatible: enum: - usb5e3,608 + - usb5e3,610

reg: true

From: Sven Schnelle svens@linux.ibm.com

[ Upstream commit db4df8e9d79e7d37732c1a1b560958e8dadfefa1 ]

When specifying an invalid console= device like console=tty3270, tty_driver_lookup_tty() returns the tty struct without checking whether index is a valid number.

To reproduce:

qemu-system-x86_64 -enable-kvm -nographic -serial mon:stdio \ -kernel ../linux-build-x86/arch/x86/boot/bzImage \ -append "console=ttyS0 console=tty3270"

This crashes with:

[ 0.770599] BUG: kernel NULL pointer dereference, address: 00000000000000ef [ 0.771265] #PF: supervisor read access in kernel mode [ 0.771773] #PF: error_code(0x0000) - not-present page [ 0.772609] Oops: 0000 [#1] PREEMPT SMP PTI [ 0.774878] RIP: 0010:tty_open+0x268/0x6f0 [ 0.784013] chrdev_open+0xbd/0x230 [ 0.784444] ? cdev_device_add+0x80/0x80 [ 0.784920] do_dentry_open+0x1e0/0x410 [ 0.785389] path_openat+0xca9/0x1050 [ 0.785813] do_filp_open+0xaa/0x150 [ 0.786240] file_open_name+0x133/0x1b0 [ 0.786746] filp_open+0x27/0x50 [ 0.787244] console_on_rootfs+0x14/0x4d [ 0.787800] kernel_init_freeable+0x1e4/0x20d [ 0.788383] ? rest_init+0xc0/0xc0 [ 0.788881] kernel_init+0x11/0x120 [ 0.789356] ret_from_fork+0x22/0x30

Signed-off-by: Sven Schnelle svens@linux.ibm.com Reviewed-by: Jiri Slaby jirislaby@kernel.org Link: https://lore.kernel.org/r/20221209112737.3222509-2-svens@linux.ibm.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/tty/tty_io.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 3149114bf130e..36fb945fdad48 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -1224,14 +1224,16 @@ static struct tty_struct *tty_driver_lookup_tty(struct tty_driver *driver, { struct tty_struct *tty;

- if (driver->ops->lookup) + if (driver->ops->lookup) { if (!file) tty = ERR_PTR(-EIO); else tty = driver->ops->lookup(driver, file, idx); - else + } else { + if (idx >= driver->num) + return ERR_PTR(-EINVAL); tty = driver->ttys[idx]; - + } if (!IS_ERR(tty)) tty_kref_get(tty); return tty;

From: Isaac True isaac.true@canonical.com

[ Upstream commit c8f71b49ee4d28930c4a6798d1969fa91dc4ef3e ]

The GPIO controller component of the sc16is7xx driver is setup too early, which can result in a race condition where another device tries to utilise the GPIO lines before the sc16is7xx device has finished initialising.

This issue manifests itself as an Oops when the GPIO lines are configured:

Unable to handle kernel read from unreadable memory at virtual address ... pc : sc16is7xx_gpio_direction_output+0x68/0x108 [sc16is7xx] lr : sc16is7xx_gpio_direction_output+0x4c/0x108 [sc16is7xx] ... Call trace: sc16is7xx_gpio_direction_output+0x68/0x108 [sc16is7xx] gpiod_direction_output_raw_commit+0x64/0x318 gpiod_direction_output+0xb0/0x170 create_gpio_led+0xec/0x198 gpio_led_probe+0x16c/0x4f0 platform_drv_probe+0x5c/0xb0 really_probe+0xe8/0x448 driver_probe_device+0xe8/0x138 __device_attach_driver+0x94/0x118 bus_for_each_drv+0x8c/0xe0 __device_attach+0x100/0x1b8 device_initial_probe+0x28/0x38 bus_probe_device+0xa4/0xb0 deferred_probe_work_func+0x90/0xe0 process_one_work+0x1c4/0x480 worker_thread+0x54/0x430 kthread+0x138/0x150 ret_from_fork+0x10/0x1c

This patch moves the setup of the GPIO controller functions to later in the probe function, ensuring the sc16is7xx device has already finished initialising by the time other devices try to make use of the GPIO lines. The error handling has also been reordered to reflect the new initialisation order.

Co-developed-by: Wen-chien Jesse Sung jesse.sung@canonical.com Signed-off-by: Wen-chien Jesse Sung jesse.sung@canonical.com Signed-off-by: Isaac True isaac.true@canonical.com Link: https://lore.kernel.org/r/20221130105529.698385-1-isaac.true@canonical.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/tty/serial/sc16is7xx.c | 51 +++++++++++++++++----------------- 1 file changed, 26 insertions(+), 25 deletions(-)

diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c index 39f92eb1e6989..29c94be091596 100644 --- a/drivers/tty/serial/sc16is7xx.c +++ b/drivers/tty/serial/sc16is7xx.c @@ -1423,25 +1423,6 @@ static int sc16is7xx_probe(struct device *dev, } sched_set_fifo(s->kworker_task);

-#ifdef CONFIG_GPIOLIB - if (devtype->nr_gpio) { - /* Setup GPIO cotroller */ - s->gpio.owner = THIS_MODULE; - s->gpio.parent = dev; - s->gpio.label = dev_name(dev); - s->gpio.direction_input = sc16is7xx_gpio_direction_input; - s->gpio.get = sc16is7xx_gpio_get; - s->gpio.direction_output = sc16is7xx_gpio_direction_output; - s->gpio.set = sc16is7xx_gpio_set; - s->gpio.base = -1; - s->gpio.ngpio = devtype->nr_gpio; - s->gpio.can_sleep = 1; - ret = gpiochip_add_data(&s->gpio, s); - if (ret) - goto out_thread; - } -#endif - /* reset device, purging any pending irq / data */ regmap_write(s->regmap, SC16IS7XX_IOCONTROL_REG << SC16IS7XX_REG_SHIFT, SC16IS7XX_IOCONTROL_SRESET_BIT); @@ -1518,6 +1499,25 @@ static int sc16is7xx_probe(struct device *dev, s->p[u].irda_mode = true; }

+#ifdef CONFIG_GPIOLIB + if (devtype->nr_gpio) { + /* Setup GPIO cotroller */ + s->gpio.owner = THIS_MODULE; + s->gpio.parent = dev; + s->gpio.label = dev_name(dev); + s->gpio.direction_input = sc16is7xx_gpio_direction_input; + s->gpio.get = sc16is7xx_gpio_get; + s->gpio.direction_output = sc16is7xx_gpio_direction_output; + s->gpio.set = sc16is7xx_gpio_set; + s->gpio.base = -1; + s->gpio.ngpio = devtype->nr_gpio; + s->gpio.can_sleep = 1; + ret = gpiochip_add_data(&s->gpio, s); + if (ret) + goto out_thread; + } +#endif + /* * Setup interrupt. We first try to acquire the IRQ line as level IRQ. * If that succeeds, we can allow sharing the interrupt as well. @@ -1537,18 +1537,19 @@ static int sc16is7xx_probe(struct device *dev, if (!ret) return 0;

-out_ports: - for (i--; i >= 0; i--) { - uart_remove_one_port(&sc16is7xx_uart, &s->p[i].port); - clear_bit(s->p[i].port.line, &sc16is7xx_lines); - } - #ifdef CONFIG_GPIOLIB if (devtype->nr_gpio) gpiochip_remove(&s->gpio);

out_thread: #endif + +out_ports: + for (i--; i >= 0; i--) { + uart_remove_one_port(&sc16is7xx_uart, &s->p[i].port); + clear_bit(s->p[i].port.line, &sc16is7xx_lines); + } + kthread_stop(s->kworker_task);

out_clk:

From: "Maciej W. Rozycki" macro@orcam.me.uk

[ Upstream commit c087df8d1e7dc2e764d11234d84b5af46d500f16 ]

No Oxford Semiconductor PCI or PCIe parallel port device supports the Parallel Port FIFO mode. All support the PS/2 Parallel Port mode and the Enhanced Parallel Port mode via the ECR register. The original 5V PCI OX16PCI954 device does not support the Extended Capabilities Port mode, the Test mode or the Configuration mode, but all the other OxSemi devices do, including in particular the 3.3V PCI OXmPCI954 device and the universal voltage PCI OXuPCI954 device. All the unsupported modes are marked reserved in the relevant datasheets.

Accordingly enable the `base_hi' BAR for the 954 devices to enable PS2 and EPP mode support via the ECR register, however mask the COMPAT mode and, until we have a way to determine what chip variant it is that we poke at, also the ECP mode, and mask the COMPAT mode only for all the remaining OxSemi devices, fixing errors like:

parport0: FIFO is stuck FIFO write timed out

and a non-functional port when the Parallel Port FIFO mode is selected.

Complementing the fix apply an ECR mask for all these devices, which are documented to only permit writing to the mode field of the ECR register with a bit pattern of 00001 required to be written to bits 4:0 on mode field writes. No nFault or service interrupts are implemented, which will therefore never have to be enabled, though bit 2 does report the FIFO threshold status to be polled for in the ECP mode where supported.

We have a documented case of writing 1 to bit 2 causing a lock-up with at least one OX12PCI840 device (from old drivers/parport/ChangeLog):

2001-10-10 Tim Waugh twaugh@redhat.com

* parport_pc.c: Support for OX12PCI840 PCI card (reported by mk@daveg.com). Lock-ups diagnosed by Ronnie Arosa (and now we just don't trust its ECR).

which commit adbd321a17cc ("parport_pc: add base_hi BAR for oxsemi_840") must have broken and by applying an ECR mask here we prevent the lock-up from triggering. This could have been the reason for requiring 00001 to be written to bits 4:0 of ECR.

Update the inline comment accordingly; it has come from Linux 2.4.12 back in 2001 and predates the introduction of OXmPCI954 and OXuPCI954 devices that do support ECP.

References:

[1] "OX16PCI954 Integrated Quad UART and PCI interface", Oxford Semiconductor Ltd., Data Sheet Revision 1.3, Feb. 1999, Chapter 9 "Bidirectional Parallel Port", pp. 53-55

[2] "OX16PCI952 Data Sheet, Integrated High Performance Dual UARTs, Parallel Port and 5.0v PCI interface", Oxford Semiconductor Ltd., DS_B008A_00, Datasheet rev 1.1, June 2001, Chapter 8 "Bi-directional Parallel Port", pp. 52-56

[3] "OXmPCI954 DATA SHEET Integrated High Performance Quad UARTs, 8-bit Local Bus/Parallel Port. 3.3v PCI/miniPCI interface.", Oxford Semiconductor Ltd., DS-0019, June 2005, Chapter 10 "Bidirectional Parallel Port", pp. 86-90

[4] "OXmPCI952 Data Sheet, Integrated High Performance Dual UARTs, 8-bit Local Bus/Parallel Port. 3.3v PCI/miniPCI interface.", Oxford Semiconductor Ltd., DS-0020, June 2005, Chapter 8 "Bidirectional Parallel Port", pp. 73-77

[5] "OX12PCI840 Integrated Parallel Port and PCI interface", Oxford Semiconductor Ltd., DS-0021, Jun 2005, Chapter 5 "Bi-directional Parallel Port", pp. 18-21

[6] "OXPCIe952 PCI Express Bridge to Dual Serial & Parallel Port", Oxford Semiconductor, Inc., DS-0046, Mar 06 08, Chapter "Parallel Port Function", pp. 59-62

[7] "OXPCIe840 PCI Express Bridge to Parallel Port", Oxford Semiconductor, Inc., DS-0049, Mar 06 08, Chapter "Parallel Port Function", pp. 15-18

[8] "OXuPCI954 Data Sheet, Integrated High Performance Quad UARTs, 8-bit Local Bus/Parallel Port, 3.3 V and 5 V (Universal Voltage) PCI Interface.", Oxford Semiconductor, Inc., DS-0058, 26 Jan 2009, Chapter 8 "Bidirectional Parallel Port", pp. 62-65

[9] "OXuPCI952 Data Sheet, Integrated High Performance Dual UARTs, 8-bit Local Bus/Parallel Port, 3.3 V and 5.0 V Universal Voltage PCI Interface.", Oxford Semiconductor, Inc., DS-0059, Sep 2007, Chapter 8 "Bidirectional Parallel Port", pp. 61-64

Signed-off-by: Maciej W. Rozycki macro@orcam.me.uk Signed-off-by: Sudip Mukherjee sudipm.mukherjee@gmail.com Link: https://lore.kernel.org/r/20230108215656.6433-6-sudipm.mukherjee@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/parport/parport_pc.c | 19 +++++++++++++------ 1 file changed, 13 insertions(+), 6 deletions(-)

diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c index 5784dc20fb382..d6c63c7044608 100644 --- a/drivers/parport/parport_pc.c +++ b/drivers/parport/parport_pc.c @@ -2658,12 +2658,19 @@ static struct parport_pc_pci { /* titan_010l */ { 1, { { 3, -1 }, } }, /* avlab_1p */ { 1, { { 0, 1}, } }, /* avlab_2p */ { 2, { { 0, 1}, { 2, 3 },} }, - /* The Oxford Semi cards are unusual: 954 doesn't support ECP, - * and 840 locks up if you write 1 to bit 2! */ - /* oxsemi_952 */ { 1, { { 0, 1 }, } }, - /* oxsemi_954 */ { 1, { { 0, -1 }, } }, - /* oxsemi_840 */ { 1, { { 0, 1 }, } }, - /* oxsemi_pcie_pport */ { 1, { { 0, 1 }, } }, + /* The Oxford Semi cards are unusual: older variants of 954 don't + * support ECP, and 840 locks up if you write 1 to bit 2! None + * implement nFault or service interrupts and all require 00001 + * bit pattern to be used for bits 4:0 with ECR writes. */ + /* oxsemi_952 */ { 1, { { 0, 1 }, }, + PARPORT_MODE_COMPAT, ECR_MODE_MASK }, + /* oxsemi_954 */ { 1, { { 0, 1 }, }, + PARPORT_MODE_ECP | + PARPORT_MODE_COMPAT, ECR_MODE_MASK }, + /* oxsemi_840 */ { 1, { { 0, 1 }, }, + PARPORT_MODE_COMPAT, ECR_MODE_MASK }, + /* oxsemi_pcie_pport */ { 1, { { 0, 1 }, }, + PARPORT_MODE_COMPAT, ECR_MODE_MASK }, /* aks_0100 */ { 1, { { 0, -1 }, } }, /* mobility_pp */ { 1, { { 0, 1 }, } }, /* netmos_9900 */ { 1, { { 0, -1 }, } },

From: Yulong Zhang yulong.zhang@metoak.net

[ Upstream commit f2edf0c819a4823cd6c288801ce737e8d4fcde06 ]

1. fopen sysfs without fclose. 2. asprintf filename without free. 3. if asprintf return error,do not need to free the buffer.

Signed-off-by: Yulong Zhang yulong.zhang@metoak.net Link: https://lore.kernel.org/r/20230117025147.69890-1-yulong.zhang@metoak.net Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/iio/iio_utils.c | 23 ++++++----------------- 1 file changed, 6 insertions(+), 17 deletions(-)

diff --git a/tools/iio/iio_utils.c b/tools/iio/iio_utils.c index 8d35893b2fa85..6a00a6eecaef0 100644 --- a/tools/iio/iio_utils.c +++ b/tools/iio/iio_utils.c @@ -264,6 +264,7 @@ int iioutils_get_param_float(float *output, const char *param_name, if (fscanf(sysfsfp, "%f", output) != 1) ret = errno ? -errno : -ENODATA;

+ fclose(sysfsfp); break; } error_free_filename: @@ -345,9 +346,9 @@ int build_channel_array(const char *device_dir, int buffer_idx, }

sysfsfp = fopen(filename, "r"); + free(filename); if (!sysfsfp) { ret = -errno; - free(filename); goto error_close_dir; }

@@ -357,7 +358,6 @@ int build_channel_array(const char *device_dir, int buffer_idx, if (fclose(sysfsfp)) perror("build_channel_array(): Failed to close file");

- free(filename); goto error_close_dir; } if (ret == 1) @@ -365,11 +365,9 @@ int build_channel_array(const char *device_dir, int buffer_idx,

if (fclose(sysfsfp)) { ret = -errno; - free(filename); goto error_close_dir; }

- free(filename); }

*ci_array = malloc(sizeof(**ci_array) * (*counter)); @@ -395,9 +393,9 @@ int build_channel_array(const char *device_dir, int buffer_idx, }

sysfsfp = fopen(filename, "r"); + free(filename); if (!sysfsfp) { ret = -errno; - free(filename); count--; goto error_cleanup_array; } @@ -405,20 +403,17 @@ int build_channel_array(const char *device_dir, int buffer_idx, errno = 0; if (fscanf(sysfsfp, "%i", &current_enabled) != 1) { ret = errno ? -errno : -ENODATA; - free(filename); count--; goto error_cleanup_array; }

if (fclose(sysfsfp)) { ret = -errno; - free(filename); count--; goto error_cleanup_array; }

if (!current_enabled) { - free(filename); count--; continue; } @@ -429,7 +424,6 @@ int build_channel_array(const char *device_dir, int buffer_idx, strlen(ent->d_name) - strlen("_en")); if (!current->name) { - free(filename); ret = -ENOMEM; count--; goto error_cleanup_array; @@ -439,7 +433,6 @@ int build_channel_array(const char *device_dir, int buffer_idx, ret = iioutils_break_up_name(current->name, &current->generic_name); if (ret) { - free(filename); free(current->name); count--; goto error_cleanup_array; @@ -450,17 +443,16 @@ int build_channel_array(const char *device_dir, int buffer_idx, scan_el_dir, current->name); if (ret < 0) { - free(filename); ret = -ENOMEM; goto error_cleanup_array; }

sysfsfp = fopen(filename, "r"); + free(filename); if (!sysfsfp) { ret = -errno; - fprintf(stderr, "failed to open %s\n", - filename); - free(filename); + fprintf(stderr, "failed to open %s/%s_index\n", + scan_el_dir, current->name); goto error_cleanup_array; }

@@ -470,17 +462,14 @@ int build_channel_array(const char *device_dir, int buffer_idx, if (fclose(sysfsfp)) perror("build_channel_array(): Failed to close file");

- free(filename); goto error_cleanup_array; }

if (fclose(sysfsfp)) { ret = -errno; - free(filename); goto error_cleanup_array; }

- free(filename); /* Find the scale */ ret = iioutils_get_param_float(&current->scale, "scale",

From: Harshit Mogalapalli harshit.m.mogalapalli@oracle.com

[ Upstream commit e56d2c34ce9dc122b1a618172ec0e05e50adb9e9 ]

Smatch Warns: drivers/iio/accel/mma9551_core.c:357 mma9551_read_status_word() error: uninitialized symbol 'v'.

When (offset >= 1 << 12) is true mma9551_transfer() will return -EINVAL without 'v' being initialized, so check for the error and return.

Note: Not a bug as such because the caller checks return value and doesn't not use this parameter in the problem case.

Signed-off-by: Harshit Mogalapalli harshit.m.mogalapalli@oracle.com Link: https://lore.kernel.org/r/20230126152147.3585874-1-harshit.m.mogalapalli@ora... Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iio/accel/mma9551_core.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/iio/accel/mma9551_core.c b/drivers/iio/accel/mma9551_core.c index 64ca7d7a9673d..86437ddc5ca18 100644 --- a/drivers/iio/accel/mma9551_core.c +++ b/drivers/iio/accel/mma9551_core.c @@ -354,9 +354,12 @@ int mma9551_read_status_word(struct i2c_client *client, u8 app_id,

ret = mma9551_transfer(client, app_id, MMA9551_CMD_READ_STATUS, reg, NULL, 0, (u8 *)&v, 2); + if (ret < 0) + return ret; + *val = be16_to_cpu(v);

- return ret; + return 0; } EXPORT_SYMBOL_NS(mma9551_read_status_word, IIO_MMA9551);

From: Marek Vasut marex@denx.de

[ Upstream commit 015d44c2b700ba9639dd29672ba362796cc0be54 ]

The Cypress EZUSB FX3 UVC example can be configured to report pixel format "e436eb7e-524f-11ce-9f53-0020af0ba770". This is its GUID for BGRA/X 8:8:8:8.

The UVC 1.5 spec [1] only defines GUIDs for YUY2, NV12, M420 and I420. This seems to be an extension documented in the Microsoft Windows Media Format SDK[2]. This Media Format SDK defines this GUID as corresponding to `MEDIASUBTYPE_RGB32`, which is confirmed by [4] as `MEDIASUBTYPE_ARGB32` has different GUID.

Note that in my case, the FX3 UVC can output either channel order, BGR or RGB or any other mix for that matter. Since Linux commit 1b8dc32286a1a ("[media] uvcvideo: Add GUID for BGR 8:8:8") defined a GUID for `MEDIASUBTYPE_RGB24` channel order as BGR, keep this change consistent and define `MEDIASUBTYPE_RGB32` as BGR as well. Document [3] also indicates the channel order is BGR.

[1] https://www.usb.org/document-library/video-class-v15-document-set [2] https://learn.microsoft.com/en-us/windows/win32/wmformat/media-type-identifi... [3] https://learn.microsoft.com/en-us/windows/win32/directshow/uncompressed-rgb-... [4] https://gix.github.io/media-types/

Signed-off-by: Marek Vasut marex@denx.de Reviewed-by: Laurent Pinchart laurent.pinchart@ideasonboard.com Reviewed-by: Ricardo Ribalda ricardo@ribalda.com Signed-off-by: Michael Grzeschik m.grzeschik@pengutronix.de Link: https://lore.kernel.org/r/20230126231456.3402323-2-m.grzeschik@pengutronix.d... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/media/v4l2-uvc.h | 8 ++++++++ 1 file changed, 8 insertions(+)

diff --git a/include/media/v4l2-uvc.h b/include/media/v4l2-uvc.h index f83e31661333b..b010a36fc1d95 100644 --- a/include/media/v4l2-uvc.h +++ b/include/media/v4l2-uvc.h @@ -99,6 +99,9 @@ #define UVC_GUID_FORMAT_BGR3 \ { 0x7d, 0xeb, 0x36, 0xe4, 0x4f, 0x52, 0xce, 0x11, \ 0x9f, 0x53, 0x00, 0x20, 0xaf, 0x0b, 0xa7, 0x70} +#define UVC_GUID_FORMAT_BGR4 \ + { 0x7e, 0xeb, 0x36, 0xe4, 0x4f, 0x52, 0xce, 0x11, \ + 0x9f, 0x53, 0x00, 0x20, 0xaf, 0x0b, 0xa7, 0x70} #define UVC_GUID_FORMAT_M420 \ { 'M', '4', '2', '0', 0x00, 0x00, 0x10, 0x00, \ 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} @@ -266,6 +269,11 @@ static struct uvc_format_desc uvc_fmts[] = { .guid = UVC_GUID_FORMAT_BGR3, .fcc = V4L2_PIX_FMT_BGR24, }, + { + .name = "BGRA/X 8:8:8:8 (BGR4)", + .guid = UVC_GUID_FORMAT_BGR4, + .fcc = V4L2_PIX_FMT_XBGR32, + }, { .name = "H.264", .guid = UVC_GUID_FORMAT_H264,

From: Richard Fitzgerald rf@opensource.cirrus.com

[ Upstream commit 3dca1f89ae3455963d7b53245ecf298ea9bae857 ]

Don't hold sdw_dev_lock while calling the peripheral driver probe() and remove() callbacks.

Holding sdw_dev_lock around the probe() and remove() calls causes a theoretical mutex inversion which lockdep will assert on.

During probe() the sdw_dev_lock mutex is taken first and then ASoC/ALSA locks are taken by the probe() implementation.

During normal operation ASoC can take its locks and then trigger a runtime resume of the component. The SoundWire resume will then take sdw_dev_lock. This is the reverse order compared to probe().

It's not necessary to hold sdw_dev_lock when calling the probe() and remove(), it is only used to prevent the bus core calling the driver callbacks if there isn't a driver or the driver is removing.

All calls to the driver callbacks are guarded by the 'probed' flag. So if sdw_dev_lock is held while setting and clearing the 'probed' flag this is sufficient to guarantee the safety of callback functions.

Removing the mutex from around the call to probe() means that it is now possible for a bus event (PING response) to be handled in parallel with the probe(). But sdw_bus_probe() already has handling for this by calling the device update_status() after the probe() has completed.

Example lockdep assert: [ 46.098514] ====================================================== [ 46.104736] WARNING: possible circular locking dependency detected [ 46.110961] 6.1.0-rc4-jamerson #1 Tainted: G E [ 46.116842] ------------------------------------------------------ [ 46.123063] mpg123/1130 is trying to acquire lock: [ 46.127883] ffff8b445031fb80 (&slave->sdw_dev_lock){+.+.}-{3:3}, at: sdw_update_slave_status+0x26/0x70 [ 46.137225] but task is already holding lock: [ 46.143074] ffffffffc1455310 (&card->pcm_mutex){+.+.}-{3:3}, at: dpcm_fe_dai_open+0x49/0x830 [ 46.151536] which lock already depends on the new lock.[ 46.159732] the existing dependency chain (in reverse order) is: [ 46.167231] -> #4 (&card->pcm_mutex){+.+.}-{3:3}: [ 46.173428] __mutex_lock+0x94/0x920 [ 46.177542] snd_soc_dpcm_runtime_update+0x2e/0x100 [ 46.182958] snd_soc_dapm_put_enum_double+0x1c2/0x200 [ 46.188548] snd_ctl_elem_write+0x10c/0x1d0 [ 46.193268] snd_ctl_ioctl+0x126/0x850 [ 46.197556] __x64_sys_ioctl+0x87/0xc0 [ 46.201845] do_syscall_64+0x38/0x90 [ 46.205959] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 46.211553] -> #3 (&card->controls_rwsem){++++}-{3:3}: [ 46.218188] down_write+0x2b/0xd0 [ 46.222038] snd_ctl_add_replace+0x39/0xb0 [ 46.226672] snd_soc_add_controls+0x53/0x80 [ 46.231393] soc_probe_component+0x1e4/0x2a0 [ 46.236202] snd_soc_bind_card+0x51a/0xc80 [ 46.240836] devm_snd_soc_register_card+0x43/0x90 [ 46.246079] mc_probe+0x982/0xfe0 [snd_soc_sof_sdw] [ 46.251500] platform_probe+0x3c/0xa0 [ 46.255700] really_probe+0xde/0x390 [ 46.259814] __driver_probe_device+0x78/0x180 [ 46.264710] driver_probe_device+0x1e/0x90 [ 46.269347] __driver_attach+0x9f/0x1f0 [ 46.273721] bus_for_each_dev+0x78/0xc0 [ 46.278098] bus_add_driver+0x1ac/0x200 [ 46.282473] driver_register+0x8f/0xf0 [ 46.286759] do_one_initcall+0x58/0x310 [ 46.291136] do_init_module+0x4c/0x1f0 [ 46.295422] __do_sys_finit_module+0xb4/0x130 [ 46.300321] do_syscall_64+0x38/0x90 [ 46.304434] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 46.310027] -> #2 (&card->mutex){+.+.}-{3:3}: [ 46.315883] __mutex_lock+0x94/0x920 [ 46.320000] snd_soc_bind_card+0x3e/0xc80 [ 46.324551] devm_snd_soc_register_card+0x43/0x90 [ 46.329798] mc_probe+0x982/0xfe0 [snd_soc_sof_sdw] [ 46.335219] platform_probe+0x3c/0xa0 [ 46.339420] really_probe+0xde/0x390 [ 46.343532] __driver_probe_device+0x78/0x180 [ 46.348430] driver_probe_device+0x1e/0x90 [ 46.353065] __driver_attach+0x9f/0x1f0 [ 46.357437] bus_for_each_dev+0x78/0xc0 [ 46.361812] bus_add_driver+0x1ac/0x200 [ 46.366716] driver_register+0x8f/0xf0 [ 46.371528] do_one_initcall+0x58/0x310 [ 46.376424] do_init_module+0x4c/0x1f0 [ 46.381239] __do_sys_finit_module+0xb4/0x130 [ 46.386665] do_syscall_64+0x38/0x90 [ 46.391299] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 46.397416] -> #1 (client_mutex){+.+.}-{3:3}: [ 46.404307] __mutex_lock+0x94/0x920 [ 46.408941] snd_soc_add_component+0x24/0x2c0 [ 46.414345] devm_snd_soc_register_component+0x54/0xa0 [ 46.420522] cs35l56_common_probe+0x280/0x370 [snd_soc_cs35l56] [ 46.427487] cs35l56_sdw_probe+0xf4/0x170 [snd_soc_cs35l56_sdw] [ 46.434442] sdw_drv_probe+0x80/0x1a0 [ 46.439136] really_probe+0xde/0x390 [ 46.443738] __driver_probe_device+0x78/0x180 [ 46.449120] driver_probe_device+0x1e/0x90 [ 46.454247] __driver_attach+0x9f/0x1f0 [ 46.459106] bus_for_each_dev+0x78/0xc0 [ 46.463971] bus_add_driver+0x1ac/0x200 [ 46.468825] driver_register+0x8f/0xf0 [ 46.473592] do_one_initcall+0x58/0x310 [ 46.478441] do_init_module+0x4c/0x1f0 [ 46.483202] __do_sys_finit_module+0xb4/0x130 [ 46.488572] do_syscall_64+0x38/0x90 [ 46.493158] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 46.499229] -> #0 (&slave->sdw_dev_lock){+.+.}-{3:3}: [ 46.506737] __lock_acquire+0x1121/0x1df0 [ 46.511765] lock_acquire+0xd5/0x300 [ 46.516360] __mutex_lock+0x94/0x920 [ 46.520949] sdw_update_slave_status+0x26/0x70 [ 46.526409] sdw_clear_slave_status+0xd8/0xe0 [ 46.531783] intel_resume_runtime+0x139/0x2a0 [ 46.537155] __rpm_callback+0x41/0x120 [ 46.541919] rpm_callback+0x5d/0x70 [ 46.546422] rpm_resume+0x531/0x7e0 [ 46.550920] __pm_runtime_resume+0x4a/0x80 [ 46.556024] snd_soc_pcm_component_pm_runtime_get+0x2f/0xc0 [ 46.562611] __soc_pcm_open+0x62/0x520 [ 46.567375] dpcm_be_dai_startup+0x116/0x210 [ 46.572661] dpcm_fe_dai_open+0xf7/0x830 [ 46.577597] snd_pcm_open_substream+0x54a/0x8b0 [ 46.583145] snd_pcm_open.part.0+0xdc/0x200 [ 46.588341] snd_pcm_playback_open+0x51/0x80 [ 46.593625] chrdev_open+0xc0/0x250 [ 46.598129] do_dentry_open+0x15f/0x430 [ 46.602981] path_openat+0x75e/0xa80 [ 46.607575] do_filp_open+0xb2/0x160 [ 46.612162] do_sys_openat2+0x9a/0x160 [ 46.616922] __x64_sys_openat+0x53/0xa0 [ 46.621767] do_syscall_64+0x38/0x90 [ 46.626352] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 46.632414] other info that might help us debug this:[ 46.641862] Chain exists of: &slave->sdw_dev_lock --> &card->controls_rwsem --> &card->pcm_mutex[ 46.655145] Possible unsafe locking scenario:[ 46.662048] CPU0 CPU1 [ 46.667080] ---- ---- [ 46.672108] lock(&card->pcm_mutex); [ 46.676267] lock(&card->controls_rwsem); [ 46.683382] lock(&card->pcm_mutex); [ 46.690063] lock(&slave->sdw_dev_lock); [ 46.694574] *** DEADLOCK ***[ 46.701942] 2 locks held by mpg123/1130: [ 46.706356] #0: ffff8b4457b22b90 (&pcm->open_mutex){+.+.}-{3:3}, at: snd_pcm_open.part.0+0xc9/0x200 [ 46.715999] #1: ffffffffc1455310 (&card->pcm_mutex){+.+.}-{3:3}, at: dpcm_fe_dai_open+0x49/0x830 [ 46.725390] stack backtrace: [ 46.730752] CPU: 0 PID: 1130 Comm: mpg123 Tainted: G E 6.1.0-rc4-jamerson #1 [ 46.739703] Hardware name: AAEON UP-WHL01/UP-WHL01, BIOS UPW1AM19 11/10/2020 [ 46.747270] Call Trace: [ 46.750239] <TASK> [ 46.752857] dump_stack_lvl+0x56/0x73 [ 46.757045] check_noncircular+0x102/0x120 [ 46.761664] __lock_acquire+0x1121/0x1df0 [ 46.766197] lock_acquire+0xd5/0x300 [ 46.770292] ? sdw_update_slave_status+0x26/0x70 [ 46.775432] ? lock_is_held_type+0xe2/0x140 [ 46.780143] __mutex_lock+0x94/0x920 [ 46.784241] ? sdw_update_slave_status+0x26/0x70 [ 46.789387] ? find_held_lock+0x2b/0x80 [ 46.793750] ? sdw_update_slave_status+0x26/0x70 [ 46.798894] ? lock_release+0x147/0x2f0 [ 46.803262] ? lockdep_init_map_type+0x47/0x250 [ 46.808315] ? sdw_update_slave_status+0x26/0x70 [ 46.813456] sdw_update_slave_status+0x26/0x70 [ 46.818422] sdw_clear_slave_status+0xd8/0xe0 [ 46.823302] ? pm_generic_runtime_suspend+0x30/0x30 [ 46.828706] intel_resume_runtime+0x139/0x2a0 [ 46.833583] ? _raw_spin_unlock_irq+0x24/0x50 [ 46.838462] ? pm_generic_runtime_suspend+0x30/0x30 [ 46.843866] __rpm_callback+0x41/0x120 [ 46.848142] ? pm_generic_runtime_suspend+0x30/0x30 [ 46.853550] rpm_callback+0x5d/0x70 [ 46.857568] rpm_resume+0x531/0x7e0 [ 46.861578] ? _raw_spin_lock_irqsave+0x62/0x70 [ 46.866634] __pm_runtime_resume+0x4a/0x80 [ 46.871258] snd_soc_pcm_component_pm_runtime_get+0x2f/0xc0 [ 46.877358] __soc_pcm_open+0x62/0x520 [ 46.881634] ? dpcm_add_paths.isra.0+0x35d/0x4c0 [ 46.886784] dpcm_be_dai_startup+0x116/0x210 [ 46.891592] dpcm_fe_dai_open+0xf7/0x830 [ 46.896046] ? debug_mutex_init+0x33/0x50 [ 46.900591] snd_pcm_open_substream+0x54a/0x8b0 [ 46.905658] snd_pcm_open.part.0+0xdc/0x200 [ 46.910376] ? wake_up_q+0x90/0x90 [ 46.914312] snd_pcm_playback_open+0x51/0x80 [ 46.919118] chrdev_open+0xc0/0x250 [ 46.923147] ? cdev_device_add+0x90/0x90 [ 46.927608] do_dentry_open+0x15f/0x430 [ 46.931976] path_openat+0x75e/0xa80 [ 46.936086] do_filp_open+0xb2/0x160 [ 46.940194] ? lock_release+0x147/0x2f0 [ 46.944563] ? _raw_spin_unlock+0x29/0x50 [ 46.949101] do_sys_openat2+0x9a/0x160 [ 46.953377] __x64_sys_openat+0x53/0xa0 [ 46.957733] do_syscall_64+0x38/0x90 [ 46.961829] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 46.967402] RIP: 0033:0x7fa6397ccd3b [ 46.971506] Code: 25 00 00 41 00 3d 00 00 41 00 74 4b 64 8b 04 25 18 00 00 00 85 c0 75 67 44 89 e2 48 89 ee bf 9c ff ff ff b8 01 01 00 00 0f 05 <48> 3d 00 f0 ff ff 0f 87 91 00 00 00 48 8b 4c 24 28 64 48 33 0c 25 [ 46.991413] RSP: 002b:00007fff838e8990 EFLAGS: 00000246 ORIG_RAX: 0000000000000101 [ 46.999580] RAX: ffffffffffffffda RBX: 0000000000080802 RCX: 00007fa6397ccd3b [ 47.007311] RDX: 0000000000080802 RSI: 00007fff838e8b50 RDI: 00000000ffffff9c [ 47.015047] RBP: 00007fff838e8b50 R08: 0000000000000000 R09: 0000000000000011 [ 47.022787] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000080802 [ 47.030539] R13: 0000000000000004 R14: 0000000000000000 R15: 00007fff838e8b50 [ 47.038289] </TASK>

Signed-off-by: Richard Fitzgerald rf@opensource.cirrus.com Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20230123172520.339367-1-rf@opensource.cirrus.com Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/soundwire/bus_type.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/soundwire/bus_type.c b/drivers/soundwire/bus_type.c index 04b3529f89293..963498db0fd22 100644 --- a/drivers/soundwire/bus_type.c +++ b/drivers/soundwire/bus_type.c @@ -105,20 +105,19 @@ static int sdw_drv_probe(struct device *dev) if (ret) return ret;

- mutex_lock(&slave->sdw_dev_lock); - ret = drv->probe(slave, id); if (ret) { name = drv->name; if (!name) name = drv->driver.name; - mutex_unlock(&slave->sdw_dev_lock);

dev_err(dev, "Probe of %s failed: %d\n", name, ret); dev_pm_domain_detach(dev, false); return ret; }

+ mutex_lock(&slave->sdw_dev_lock); + /* device is probed so let's read the properties now */ if (drv->ops && drv->ops->read_prop) drv->ops->read_prop(slave); @@ -167,14 +166,12 @@ static int sdw_drv_remove(struct device *dev) int ret = 0;

mutex_lock(&slave->sdw_dev_lock); - slave->probed = false; + mutex_unlock(&slave->sdw_dev_lock);

if (drv->remove) ret = drv->remove(slave);

- mutex_unlock(&slave->sdw_dev_lock); - dev_pm_domain_detach(dev, false);

return ret;

From: Huacai Chen chenhuacai@loongson.cn

[ Upstream commit 8b3517f88ff2983f52698893519227c10aac90b2 ]

Except for isochronous-configured devices, software may set Max_Read_Request_Size (MRRS) to any value up to 4096. If a device issues a read request with size greater than the completer's Max_Payload_Size (MPS), the completer is required to break the response into multiple completions.

Instead of correctly responding with multiple completions to a large read request, some LS7A Root Ports respond with a Completer Abort. To prevent this, the MRRS must be limited to an implementation-specific value.

The OS cannot detect that value, so rely on BIOS to configure MRRS before booting, and quirk the Root Ports so we never set an MRRS larger than that BIOS value for any downstream device.

N.B. Hot-added devices are not configured by BIOS, and they power up with MRRS = 512 bytes, so these devices will be limited to 512 bytes. If the LS7A limit is smaller, those hot-added devices may not work correctly, but per [1], hotplug is not supported with this chipset revision.

[1] https://lore.kernel.org/r/073638a7-ae68-2847-ac3d-29e5e760d6af@loongson.cn

[bhelgaas: commit log] Link: https://bugzilla.kernel.org/show_bug.cgi?id=216884 Link: https://lore.kernel.org/r/20230201043018.778499-3-chenhuacai@loongson.cn Signed-off-by: Huacai Chen chenhuacai@loongson.cn Signed-off-by: Bjorn Helgaas bhelgaas@google.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/controller/pci-loongson.c | 44 +++++++++------------------ drivers/pci/pci.c | 10 ++++++ include/linux/pci.h | 1 + 3 files changed, 26 insertions(+), 29 deletions(-)

diff --git a/drivers/pci/controller/pci-loongson.c b/drivers/pci/controller/pci-loongson.c index 05c50408f13b7..759ec211c17bf 100644 --- a/drivers/pci/controller/pci-loongson.c +++ b/drivers/pci/controller/pci-loongson.c @@ -75,37 +75,23 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, DEV_LS7A_LPC, system_bus_quirk);

-static void loongson_mrrs_quirk(struct pci_dev *dev) +static void loongson_mrrs_quirk(struct pci_dev *pdev) { - struct pci_bus *bus = dev->bus; - struct pci_dev *bridge; - static const struct pci_device_id bridge_devids[] = { - { PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_0) }, - { PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_1) }, - { PCI_VDEVICE(LOONGSON, DEV_PCIE_PORT_2) }, - { 0, }, - }; - - /* look for the matching bridge */ - while (!pci_is_root_bus(bus)) { - bridge = bus->self; - bus = bus->parent; - /* - * Some Loongson PCIe ports have a h/w limitation of - * 256 bytes maximum read request size. They can't handle - * anything larger than this. So force this limit on - * any devices attached under these ports. - */ - if (pci_match_id(bridge_devids, bridge)) { - if (pcie_get_readrq(dev) > 256) { - pci_info(dev, "limiting MRRS to 256\n"); - pcie_set_readrq(dev, 256); - } - break; - } - } + /* + * Some Loongson PCIe ports have h/w limitations of maximum read + * request size. They can't handle anything larger than this. So + * force this limit on any devices attached under these ports. + */ + struct pci_host_bridge *bridge = pci_find_host_bridge(pdev->bus); + + bridge->no_inc_mrrs = 1; } -DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, loongson_mrrs_quirk); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_PCIE_PORT_0, loongson_mrrs_quirk); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_PCIE_PORT_1, loongson_mrrs_quirk); +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_LOONGSON, + DEV_PCIE_PORT_2, loongson_mrrs_quirk);

static void loongson_pci_pin_quirk(struct pci_dev *pdev) { diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 5641786bd0206..aee2c9dd2ddca 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -6026,6 +6026,7 @@ int pcie_set_readrq(struct pci_dev *dev, int rq) { u16 v; int ret; + struct pci_host_bridge *bridge = pci_find_host_bridge(dev->bus);

if (rq < 128 || rq > 4096 || !is_power_of_2(rq)) return -EINVAL; @@ -6044,6 +6045,15 @@ int pcie_set_readrq(struct pci_dev *dev, int rq)

v = (ffs(rq) - 8) << 12;

+ if (bridge->no_inc_mrrs) { + int max_mrrs = pcie_get_readrq(dev); + + if (rq > max_mrrs) { + pci_info(dev, "can't set Max_Read_Request_Size to %d; max is %d\n", rq, max_mrrs); + return -EINVAL; + } + } + ret = pcie_capability_clear_and_set_word(dev, PCI_EXP_DEVCTL, PCI_EXP_DEVCTL_READRQ, v);

diff --git a/include/linux/pci.h b/include/linux/pci.h index 254c8a4126a89..50042ea8e0083 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -572,6 +572,7 @@ struct pci_host_bridge { void *release_data; unsigned int ignore_reset_delay:1; /* For entire hierarchy */ unsigned int no_ext_tags:1; /* No Extended Tags */ + unsigned int no_inc_mrrs:1; /* No Increase MRRS */ unsigned int native_aer:1; /* OS may use PCIe AER */ unsigned int native_pcie_hotplug:1; /* OS may use PCIe hotplug */ unsigned int native_shpc_hotplug:1; /* OS may use SHPC hotplug */

From: Greg Kroah-Hartman gregkh@linuxfoundation.org

[ Upstream commit be308d68785b205e483b3a0c61ba3a82da468f2c ]

When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

Note, the root dentry for the debugfs directory for the device needs to be saved so we don't have to keep looking it up, which required a bit more refactoring to properly create and remove it when needed.

Reported-by: Bruce Chen bruce.chen@unisoc.com Reported-by: Cixi Geng cixi.geng1@unisoc.com Tested-by: Cixi Geng gengcixi@gmail.com Acked-by: Thinh Nguyen Thinh.Nguyen@synopsys.com Link: https://lore.kernel.org/r/20230202152820.2409908-1-gregkh@linuxfoundation.or... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/dwc3/core.h | 2 ++ drivers/usb/dwc3/debug.h | 3 +++ drivers/usb/dwc3/debugfs.c | 19 ++++++++----------- drivers/usb/dwc3/gadget.c | 4 +--- 4 files changed, 14 insertions(+), 14 deletions(-)

diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 8f9959ba9fd46..582ebd9cf9c2e 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -1117,6 +1117,7 @@ struct dwc3_scratchpad_array { * address. * @num_ep_resized: carries the current number endpoints which have had its tx * fifo resized. + * @debug_root: root debugfs directory for this device to put its files in. */ struct dwc3 { struct work_struct drd_work; @@ -1332,6 +1333,7 @@ struct dwc3 { int max_cfg_eps; int last_fifo_depth; int num_ep_resized; + struct dentry *debug_root; };

#define INCRX_BURST_MODE 0 diff --git a/drivers/usb/dwc3/debug.h b/drivers/usb/dwc3/debug.h index 48b44b88dc252..8bb2c9e3b9ac6 100644 --- a/drivers/usb/dwc3/debug.h +++ b/drivers/usb/dwc3/debug.h @@ -414,11 +414,14 @@ static inline const char *dwc3_gadget_generic_cmd_status_string(int status)

#ifdef CONFIG_DEBUG_FS extern void dwc3_debugfs_create_endpoint_dir(struct dwc3_ep *dep); +extern void dwc3_debugfs_remove_endpoint_dir(struct dwc3_ep *dep); extern void dwc3_debugfs_init(struct dwc3 *d); extern void dwc3_debugfs_exit(struct dwc3 *d); #else static inline void dwc3_debugfs_create_endpoint_dir(struct dwc3_ep *dep) { } +static inline void dwc3_debugfs_remove_endpoint_dir(struct dwc3_ep *dep) +{ } static inline void dwc3_debugfs_init(struct dwc3 *d) { } static inline void dwc3_debugfs_exit(struct dwc3 *d) diff --git a/drivers/usb/dwc3/debugfs.c b/drivers/usb/dwc3/debugfs.c index f2b7675c7f621..850df0e6bcabf 100644 --- a/drivers/usb/dwc3/debugfs.c +++ b/drivers/usb/dwc3/debugfs.c @@ -873,27 +873,23 @@ static const struct dwc3_ep_file_map dwc3_ep_file_map[] = { { "GDBGEPINFO", &dwc3_ep_info_register_fops, }, };

-static void dwc3_debugfs_create_endpoint_files(struct dwc3_ep *dep, - struct dentry *parent) +void dwc3_debugfs_create_endpoint_dir(struct dwc3_ep *dep) { + struct dentry *dir; int i;

+ dir = debugfs_create_dir(dep->name, dep->dwc->debug_root); for (i = 0; i < ARRAY_SIZE(dwc3_ep_file_map); i++) { const struct file_operations *fops = dwc3_ep_file_map[i].fops; const char *name = dwc3_ep_file_map[i].name;

- debugfs_create_file(name, 0444, parent, dep, fops); + debugfs_create_file(name, 0444, dir, dep, fops); } }

-void dwc3_debugfs_create_endpoint_dir(struct dwc3_ep *dep) +void dwc3_debugfs_remove_endpoint_dir(struct dwc3_ep *dep) { - struct dentry *dir; - struct dentry *root; - - root = debugfs_lookup(dev_name(dep->dwc->dev), usb_debug_root); - dir = debugfs_create_dir(dep->name, root); - dwc3_debugfs_create_endpoint_files(dep, dir); + debugfs_lookup_and_remove(dep->name, dep->dwc->debug_root); }

void dwc3_debugfs_init(struct dwc3 *dwc) @@ -911,6 +907,7 @@ void dwc3_debugfs_init(struct dwc3 *dwc) dwc->regset->base = dwc->regs - DWC3_GLOBALS_REGS_START;

root = debugfs_create_dir(dev_name(dwc->dev), usb_debug_root); + dwc->debug_root = root; debugfs_create_regset32("regdump", 0444, root, dwc->regset); debugfs_create_file("lsp_dump", 0644, root, dwc, &dwc3_lsp_fops);

@@ -929,6 +926,6 @@ void dwc3_debugfs_init(struct dwc3 *dwc)

void dwc3_debugfs_exit(struct dwc3 *dwc) { - debugfs_remove(debugfs_lookup(dev_name(dwc->dev), usb_debug_root)); + debugfs_lookup_and_remove(dev_name(dwc->dev), usb_debug_root); kfree(dwc->regset); } diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 89dcfac01235f..3c63fa97a6800 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -3194,9 +3194,7 @@ static void dwc3_gadget_free_endpoints(struct dwc3 *dwc) list_del(&dep->endpoint.ep_list); }

- debugfs_remove_recursive(debugfs_lookup(dep->name, - debugfs_lookup(dev_name(dep->dwc->dev), - usb_debug_root))); + dwc3_debugfs_remove_endpoint_dir(dep); kfree(dep); } }

From: Greg Kroah-Hartman gregkh@linuxfoundation.org

[ Upstream commit 8f4d25eba599c4bd4b5ea8ae8752cda480a9d563 ]

When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

Acked-by: Heikki Krogerus heikki.krogerus@linux.intel.com Link: https://lore.kernel.org/r/20230202153235.2412790-2-gregkh@linuxfoundation.or... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/common/ulpi.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-)

diff --git a/drivers/usb/common/ulpi.c b/drivers/usb/common/ulpi.c index d7c8461976ce0..38703781ee2d1 100644 --- a/drivers/usb/common/ulpi.c +++ b/drivers/usb/common/ulpi.c @@ -271,7 +271,7 @@ static int ulpi_regs_show(struct seq_file *seq, void *data) } DEFINE_SHOW_ATTRIBUTE(ulpi_regs);

-#define ULPI_ROOT debugfs_lookup(KBUILD_MODNAME, NULL) +static struct dentry *ulpi_root;

static int ulpi_register(struct device *dev, struct ulpi *ulpi) { @@ -301,7 +301,7 @@ static int ulpi_register(struct device *dev, struct ulpi *ulpi) return ret; }

- root = debugfs_create_dir(dev_name(dev), ULPI_ROOT); + root = debugfs_create_dir(dev_name(dev), ulpi_root); debugfs_create_file("regs", 0444, root, ulpi, &ulpi_regs_fops);

dev_dbg(&ulpi->dev, "registered ULPI PHY: vendor %04x, product %04x\n", @@ -349,8 +349,7 @@ EXPORT_SYMBOL_GPL(ulpi_register_interface); */ void ulpi_unregister_interface(struct ulpi *ulpi) { - debugfs_remove_recursive(debugfs_lookup(dev_name(&ulpi->dev), - ULPI_ROOT)); + debugfs_lookup_and_remove(dev_name(&ulpi->dev), ulpi_root); device_unregister(&ulpi->dev); } EXPORT_SYMBOL_GPL(ulpi_unregister_interface); @@ -360,12 +359,11 @@ EXPORT_SYMBOL_GPL(ulpi_unregister_interface); static int __init ulpi_init(void) { int ret; - struct dentry *root;

- root = debugfs_create_dir(KBUILD_MODNAME, NULL); + ulpi_root = debugfs_create_dir(KBUILD_MODNAME, NULL); ret = bus_register(&ulpi_bus); if (ret) - debugfs_remove(root); + debugfs_remove(ulpi_root); return ret; } subsys_initcall(ulpi_init); @@ -373,7 +371,7 @@ subsys_initcall(ulpi_init); static void __exit ulpi_exit(void) { bus_unregister(&ulpi_bus); - debugfs_remove_recursive(ULPI_ROOT); + debugfs_remove(ulpi_root); } module_exit(ulpi_exit);

From: Greg Kroah-Hartman gregkh@linuxfoundation.org

[ Upstream commit e1523c4dbc54e164638ff8729d511cf91e27be04 ]

When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

Cc: Vincent Mailhol mailhol.vincent@wanadoo.fr Link: https://lore.kernel.org/r/20230202153235.2412790-4-gregkh@linuxfoundation.or... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/host/sl811-hcd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index d206bd95c7bbc..b8b90eec91078 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -1501,7 +1501,7 @@ static void create_debug_file(struct sl811 *sl811)

static void remove_debug_file(struct sl811 *sl811) { - debugfs_remove(debugfs_lookup("sl811h", usb_debug_root)); + debugfs_lookup_and_remove("sl811h", usb_debug_root); }

/*-------------------------------------------------------------------------*/

From: Greg Kroah-Hartman gregkh@linuxfoundation.org

[ Upstream commit a95f62d5813facbec20ec087472eb313ee5fa8af ]

When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

Cc: Olav Kongas ok@artecdesign.ee Link: https://lore.kernel.org/r/20230202153235.2412790-6-gregkh@linuxfoundation.or... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/host/isp116x-hcd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c index 4f564d71bb0bc..49ae01487af4d 100644 --- a/drivers/usb/host/isp116x-hcd.c +++ b/drivers/usb/host/isp116x-hcd.c @@ -1205,7 +1205,7 @@ static void create_debug_file(struct isp116x *isp116x)

static void remove_debug_file(struct isp116x *isp116x) { - debugfs_remove(debugfs_lookup(hcd_name, usb_debug_root)); + debugfs_lookup_and_remove(hcd_name, usb_debug_root); }

#else

From: Greg Kroah-Hartman gregkh@linuxfoundation.org

[ Upstream commit 73f4451368663ad28daa67980c6dd11d83b303eb ]

When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

Cc: Jakob Koschel jakobkoschel@gmail.com Link: https://lore.kernel.org/r/20230202153235.2412790-8-gregkh@linuxfoundation.or... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/gadget/udc/gr_udc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/gadget/udc/gr_udc.c b/drivers/usb/gadget/udc/gr_udc.c index 85cdc0af3bf95..09762559912d3 100644 --- a/drivers/usb/gadget/udc/gr_udc.c +++ b/drivers/usb/gadget/udc/gr_udc.c @@ -215,7 +215,7 @@ static void gr_dfs_create(struct gr_udc *dev)

static void gr_dfs_delete(struct gr_udc *dev) { - debugfs_remove(debugfs_lookup(dev_name(dev->dev), usb_debug_root)); + debugfs_lookup_and_remove(dev_name(dev->dev), usb_debug_root); }

#else /* !CONFIG_USB_GADGET_DEBUG_FS */

From: Greg Kroah-Hartman gregkh@linuxfoundation.org

[ Upstream commit e3965acaf3739fde9d74ad82979b46d37c6c208f ]

When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

Cc: Jakob Koschel jakobkoschel@gmail.com Cc: Miaoqian Lin linmq006@gmail.com Acked-by: Vladimir Zapolskiy vz@mleia.com Link: https://lore.kernel.org/r/20230202153235.2412790-10-gregkh@linuxfoundation.o... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/gadget/udc/lpc32xx_udc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/gadget/udc/lpc32xx_udc.c b/drivers/usb/gadget/udc/lpc32xx_udc.c index cea10cdb83ae5..fe62db32dd0eb 100644 --- a/drivers/usb/gadget/udc/lpc32xx_udc.c +++ b/drivers/usb/gadget/udc/lpc32xx_udc.c @@ -532,7 +532,7 @@ static void create_debug_file(struct lpc32xx_udc *udc)

static void remove_debug_file(struct lpc32xx_udc *udc) { - debugfs_remove(debugfs_lookup(debug_filename, NULL)); + debugfs_lookup_and_remove(debug_filename, NULL); }

#else

From: Greg Kroah-Hartman gregkh@linuxfoundation.org

[ Upstream commit 7a6952fa0366d4408eb8695af1a0578c39ec718a ]

When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

Cc: Daniel Mack daniel@zonque.org Cc: Haojian Zhuang haojian.zhuang@gmail.com Cc: Robert Jarzmik robert.jarzmik@free.fr Link: https://lore.kernel.org/r/20230202153235.2412790-12-gregkh@linuxfoundation.o... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/gadget/udc/pxa27x_udc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/gadget/udc/pxa27x_udc.c b/drivers/usb/gadget/udc/pxa27x_udc.c index ac980d6a47406..0ecdfd2ba9e9b 100644 --- a/drivers/usb/gadget/udc/pxa27x_udc.c +++ b/drivers/usb/gadget/udc/pxa27x_udc.c @@ -215,7 +215,7 @@ static void pxa_init_debugfs(struct pxa_udc *udc)

static void pxa_cleanup_debugfs(struct pxa_udc *udc) { - debugfs_remove(debugfs_lookup(udc->gadget.name, usb_debug_root)); + debugfs_lookup_and_remove(udc->gadget.name, usb_debug_root); }

#else

From: Kees Cook keescook@chromium.org

[ Upstream commit ce33e64c1788912976b61314b56935abd4bc97ef ]

The allocation of PageBuffer is 512 bytes in size, but the dereferencing of struct ms_bootblock_idi (also size 512) happens at a calculated offset within the allocation, which means the object could potentially extend beyond the end of the allocation. Avoid this case by just allocating enough space to catch any accesses beyond the end. Seen with GCC 13:

../drivers/usb/storage/ene_ub6250.c: In function 'ms_lib_process_bootblock': ../drivers/usb/storage/ene_ub6250.c:1050:44: warning: array subscript 'struct ms_bootblock_idi[0]' is partly outside array bounds of 'unsigned char[512]' [-Warray-bounds=] 1050 | if (le16_to_cpu(idi->wIDIgeneralConfiguration) != MS_IDI_GENERAL_CONF) | ^~ ../include/uapi/linux/byteorder/little_endian.h:37:51: note: in definition of macro '__le16_to_cpu' 37 | #define __le16_to_cpu(x) ((__force __u16)(__le16)(x)) | ^ ../drivers/usb/storage/ene_ub6250.c:1050:29: note: in expansion of macro 'le16_to_cpu' 1050 | if (le16_to_cpu(idi->wIDIgeneralConfiguration) != MS_IDI_GENERAL_CONF) | ^~~~~~~~~~~ In file included from ../drivers/usb/storage/ene_ub6250.c:5: In function 'kmalloc', inlined from 'ms_lib_process_bootblock' at ../drivers/usb/storage/ene_ub6250.c:942:15: ../include/linux/slab.h:580:24: note: at offset [256, 512] into object of size 512 allocated by 'kmalloc_trace' 580 | return kmalloc_trace( | ^~~~~~~~~~~~~~ 581 | kmalloc_caches[kmalloc_type(flags)][index], | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 582 | flags, size); | ~~~~~~~~~~~~

Cc: Alan Stern stern@rowland.harvard.edu Signed-off-by: Kees Cook keescook@chromium.org Link: https://lore.kernel.org/r/20230204183546.never.849-kees@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/storage/ene_ub6250.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/storage/ene_ub6250.c b/drivers/usb/storage/ene_ub6250.c index 6012603f3630e..97c66c0d91f4d 100644 --- a/drivers/usb/storage/ene_ub6250.c +++ b/drivers/usb/storage/ene_ub6250.c @@ -939,7 +939,7 @@ static int ms_lib_process_bootblock(struct us_data *us, u16 PhyBlock, u8 *PageDa struct ms_lib_type_extdat ExtraData; struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;

- PageBuffer = kmalloc(MS_BYTES_PER_PAGE, GFP_KERNEL); + PageBuffer = kzalloc(MS_BYTES_PER_PAGE * 2, GFP_KERNEL); if (PageBuffer == NULL) return (u32)-1;

From: Daniel Scally dan.scally@ideasonboard.com

[ Upstream commit b3c839bd8a07d303bc59a900d55dd35c7826562c ]

At the moment, the UVC function graph is hardcoded IT -> PU -> OT. To add XU support we need the ability to insert the XU descriptors into the chain. To facilitate that, make the output terminal's bSourceID attribute writeable so that we can configure its source.

Signed-off-by: Daniel Scally dan.scally@ideasonboard.com Link: https://lore.kernel.org/r/20230206161802.892954-2-dan.scally@ideasonboard.co... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- .../ABI/testing/configfs-usb-gadget-uvc | 2 +- drivers/usb/gadget/function/uvc_configfs.c | 59 ++++++++++++++++++- 2 files changed, 59 insertions(+), 2 deletions(-)

diff --git a/Documentation/ABI/testing/configfs-usb-gadget-uvc b/Documentation/ABI/testing/configfs-usb-gadget-uvc index f00cff6d8c5cb..c25cc2823fc8f 100644 --- a/Documentation/ABI/testing/configfs-usb-gadget-uvc +++ b/Documentation/ABI/testing/configfs-usb-gadget-uvc @@ -52,7 +52,7 @@ Date: Dec 2014 KernelVersion: 4.0 Description: Default output terminal descriptors

- All attributes read only: + All attributes read only except bSourceID:

============== ============================================= iTerminal index of string descriptor diff --git a/drivers/usb/gadget/function/uvc_configfs.c b/drivers/usb/gadget/function/uvc_configfs.c index 76cb60d13049f..0a3095c0450bb 100644 --- a/drivers/usb/gadget/function/uvc_configfs.c +++ b/drivers/usb/gadget/function/uvc_configfs.c @@ -483,11 +483,68 @@ UVC_ATTR_RO(uvcg_default_output_, cname, aname) UVCG_DEFAULT_OUTPUT_ATTR(b_terminal_id, bTerminalID, 8); UVCG_DEFAULT_OUTPUT_ATTR(w_terminal_type, wTerminalType, 16); UVCG_DEFAULT_OUTPUT_ATTR(b_assoc_terminal, bAssocTerminal, 8); -UVCG_DEFAULT_OUTPUT_ATTR(b_source_id, bSourceID, 8); UVCG_DEFAULT_OUTPUT_ATTR(i_terminal, iTerminal, 8);

#undef UVCG_DEFAULT_OUTPUT_ATTR

+static ssize_t uvcg_default_output_b_source_id_show(struct config_item *item, + char *page) +{ + struct config_group *group = to_config_group(item); + struct f_uvc_opts *opts; + struct config_item *opts_item; + struct mutex *su_mutex = &group->cg_subsys->su_mutex; + struct uvc_output_terminal_descriptor *cd; + int result; + + mutex_lock(su_mutex); /* for navigating configfs hierarchy */ + + opts_item = group->cg_item.ci_parent->ci_parent-> + ci_parent->ci_parent; + opts = to_f_uvc_opts(opts_item); + cd = &opts->uvc_output_terminal; + + mutex_lock(&opts->lock); + result = sprintf(page, "%u\n", le8_to_cpu(cd->bSourceID)); + mutex_unlock(&opts->lock); + + mutex_unlock(su_mutex); + + return result; +} + +static ssize_t uvcg_default_output_b_source_id_store(struct config_item *item, + const char *page, size_t len) +{ + struct config_group *group = to_config_group(item); + struct f_uvc_opts *opts; + struct config_item *opts_item; + struct mutex *su_mutex = &group->cg_subsys->su_mutex; + struct uvc_output_terminal_descriptor *cd; + int result; + u8 num; + + mutex_lock(su_mutex); /* for navigating configfs hierarchy */ + + opts_item = group->cg_item.ci_parent->ci_parent-> + ci_parent->ci_parent; + opts = to_f_uvc_opts(opts_item); + cd = &opts->uvc_output_terminal; + + result = kstrtou8(page, 0, &num); + if (result) + return result; + + mutex_lock(&opts->lock); + cd->bSourceID = num; + mutex_unlock(&opts->lock); + + mutex_unlock(su_mutex); + + return len; +} +UVC_ATTR(uvcg_default_output_, b_source_id, bSourceID); + static struct configfs_attribute *uvcg_default_output_attrs[] = { &uvcg_default_output_attr_b_terminal_id, &uvcg_default_output_attr_w_terminal_type,

From: Mika Westerberg mika.westerberg@linux.intel.com

[ Upstream commit 9db0b9b6a14249ef65a5f1e5e3b37762af96f425 ]

A PCI bridge may reside on a bus with other devices as well. The resource distribution code does not take this into account and therefore it expands the bridge resource windows too much, not leaving space for the other devices (or functions of a multifunction device). This leads to an issue that Jonathan reported when running QEMU with the following topology (QEMU parameters):

-device pcie-root-port,port=0,id=root_port13,chassis=0,slot=2 \ -device x3130-upstream,id=sw1,bus=root_port13,multifunction=on \ -device e1000,bus=root_port13,addr=0.1 \ -device xio3130-downstream,id=fun1,bus=sw1,chassis=0,slot=3 \ -device e1000,bus=fun1

The first e1000 NIC here is another function in the switch upstream port. This leads to following errors:

pci 0000:00:04.0: bridge window [mem 0x10200000-0x103fffff] to [bus 02-04] pci 0000:02:00.0: bridge window [mem 0x10200000-0x103fffff] to [bus 03-04] pci 0000:02:00.1: BAR 0: failed to assign [mem size 0x00020000] e1000 0000:02:00.1: can't ioremap BAR 0: [??? 0x00000000 flags 0x0]

Fix this by taking into account bridge windows, device BARs and SR-IOV PF BARs on the bus (PF BARs include space for VF BARS so only account PF BARs), including the ones belonging to bridges themselves if it has any.

Link: https://lore.kernel.org/linux-pci/20221014124553.0000696f@huawei.com/ Link: https://lore.kernel.org/linux-pci/6053736d-1923-41e7-def9-7585ce1772d9@ixsys... Link: https://lore.kernel.org/r/20230131092405.29121-3-mika.westerberg@linux.intel... Reported-by: Jonathan Cameron Jonathan.Cameron@huawei.com Reported-by: Alexander Motin mav@ixsystems.com Signed-off-by: Mika Westerberg mika.westerberg@linux.intel.com Signed-off-by: Bjorn Helgaas bhelgaas@google.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/setup-bus.c | 176 ++++++++++++++++++++++++---------------- 1 file changed, 106 insertions(+), 70 deletions(-)

diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index e440f264accb8..b7b8dddb77722 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -1765,12 +1765,67 @@ static void adjust_bridge_window(struct pci_dev *bridge, struct resource *res, add_size = size - new_size; pci_dbg(bridge, "bridge window %pR shrunken by %pa\n", res, &add_size); + } else { + return; }

res->end = res->start + new_size - 1; remove_from_list(add_list, res); }

+static void remove_dev_resource(struct resource *avail, struct pci_dev *dev, + struct resource *res) +{ + resource_size_t size, align, tmp; + + size = resource_size(res); + if (!size) + return; + + align = pci_resource_alignment(dev, res); + align = align ? ALIGN(avail->start, align) - avail->start : 0; + tmp = align + size; + avail->start = min(avail->start + tmp, avail->end + 1); +} + +static void remove_dev_resources(struct pci_dev *dev, struct resource *io, + struct resource *mmio, + struct resource *mmio_pref) +{ + int i; + + for (i = 0; i < PCI_NUM_RESOURCES; i++) { + struct resource *res = &dev->resource[i]; + + if (resource_type(res) == IORESOURCE_IO) { + remove_dev_resource(io, dev, res); + } else if (resource_type(res) == IORESOURCE_MEM) { + + /* + * Make sure prefetchable memory is reduced from + * the correct resource. Specifically we put 32-bit + * prefetchable memory in non-prefetchable window + * if there is an 64-bit pretchable window. + * + * See comments in __pci_bus_size_bridges() for + * more information. + */ + if ((res->flags & IORESOURCE_PREFETCH) && + ((res->flags & IORESOURCE_MEM_64) == + (mmio_pref->flags & IORESOURCE_MEM_64))) + remove_dev_resource(mmio_pref, dev, res); + else + remove_dev_resource(mmio, dev, res); + } + } +} + +/* + * io, mmio and mmio_pref contain the total amount of bridge window space + * available. This includes the minimal space needed to cover all the + * existing devices on the bus and the possible extra space that can be + * shared with the bridges. + */ static void pci_bus_distribute_available_resources(struct pci_bus *bus, struct list_head *add_list, struct resource io, @@ -1780,7 +1835,7 @@ static void pci_bus_distribute_available_resources(struct pci_bus *bus, unsigned int normal_bridges = 0, hotplug_bridges = 0; struct resource *io_res, *mmio_res, *mmio_pref_res; struct pci_dev *dev, *bridge = bus->self; - resource_size_t io_per_hp, mmio_per_hp, mmio_pref_per_hp, align; + resource_size_t io_per_b, mmio_per_b, mmio_pref_per_b, align;

io_res = &bridge->resource[PCI_BRIDGE_IO_WINDOW]; mmio_res = &bridge->resource[PCI_BRIDGE_MEM_WINDOW]; @@ -1824,100 +1879,81 @@ static void pci_bus_distribute_available_resources(struct pci_bus *bus, normal_bridges++; }

- /* - * There is only one bridge on the bus so it gets all available - * resources which it can then distribute to the possible hotplug - * bridges below. - */ - if (hotplug_bridges + normal_bridges == 1) { - dev = list_first_entry(&bus->devices, struct pci_dev, bus_list); - if (dev->subordinate) - pci_bus_distribute_available_resources(dev->subordinate, - add_list, io, mmio, mmio_pref); - return; - } - - if (hotplug_bridges == 0) + if (!(hotplug_bridges + normal_bridges)) return;

/* - * Calculate the total amount of extra resource space we can - * pass to bridges below this one. This is basically the - * extra space reduced by the minimal required space for the - * non-hotplug bridges. + * Calculate the amount of space we can forward from "bus" to any + * downstream buses, i.e., the space left over after assigning the + * BARs and windows on "bus". */ - for_each_pci_bridge(dev, bus) { - resource_size_t used_size; - struct resource *res; - - if (dev->is_hotplug_bridge) - continue; - - /* - * Reduce the available resource space by what the - * bridge and devices below it occupy. - */ - res = &dev->resource[PCI_BRIDGE_IO_WINDOW]; - align = pci_resource_alignment(dev, res); - align = align ? ALIGN(io.start, align) - io.start : 0; - used_size = align + resource_size(res); - if (!res->parent) - io.start = min(io.start + used_size, io.end + 1); - - res = &dev->resource[PCI_BRIDGE_MEM_WINDOW]; - align = pci_resource_alignment(dev, res); - align = align ? ALIGN(mmio.start, align) - mmio.start : 0; - used_size = align + resource_size(res); - if (!res->parent) - mmio.start = min(mmio.start + used_size, mmio.end + 1); - - res = &dev->resource[PCI_BRIDGE_PREF_MEM_WINDOW]; - align = pci_resource_alignment(dev, res); - align = align ? ALIGN(mmio_pref.start, align) - - mmio_pref.start : 0; - used_size = align + resource_size(res); - if (!res->parent) - mmio_pref.start = min(mmio_pref.start + used_size, - mmio_pref.end + 1); + list_for_each_entry(dev, &bus->devices, bus_list) { + if (!dev->is_virtfn) + remove_dev_resources(dev, &io, &mmio, &mmio_pref); }

- io_per_hp = div64_ul(resource_size(&io), hotplug_bridges); - mmio_per_hp = div64_ul(resource_size(&mmio), hotplug_bridges); - mmio_pref_per_hp = div64_ul(resource_size(&mmio_pref), - hotplug_bridges); - /* - * Go over devices on this bus and distribute the remaining - * resource space between hotplug bridges. + * If there is at least one hotplug bridge on this bus it gets all + * the extra resource space that was left after the reductions + * above. + * + * If there are no hotplug bridges the extra resource space is + * split between non-hotplug bridges. This is to allow possible + * hotplug bridges below them to get the extra space as well. */ + if (hotplug_bridges) { + io_per_b = div64_ul(resource_size(&io), hotplug_bridges); + mmio_per_b = div64_ul(resource_size(&mmio), hotplug_bridges); + mmio_pref_per_b = div64_ul(resource_size(&mmio_pref), + hotplug_bridges); + } else { + io_per_b = div64_ul(resource_size(&io), normal_bridges); + mmio_per_b = div64_ul(resource_size(&mmio), normal_bridges); + mmio_pref_per_b = div64_ul(resource_size(&mmio_pref), + normal_bridges); + } + for_each_pci_bridge(dev, bus) { struct resource *res; struct pci_bus *b;

b = dev->subordinate; - if (!b || !dev->is_hotplug_bridge) + if (!b) continue; + if (hotplug_bridges && !dev->is_hotplug_bridge) + continue; + + res = &dev->resource[PCI_BRIDGE_IO_WINDOW];

/* - * Distribute available extra resources equally between - * hotplug-capable downstream ports taking alignment into - * account. + * Make sure the split resource space is properly aligned + * for bridge windows (align it down to avoid going above + * what is available). */ - res = &dev->resource[PCI_BRIDGE_IO_WINDOW]; align = pci_resource_alignment(dev, res); - io.end = align ? io.start + ALIGN_DOWN(io_per_hp, align) - 1 - : io.start + io_per_hp - 1; + io.end = align ? io.start + ALIGN_DOWN(io_per_b, align) - 1 + : io.start + io_per_b - 1; + + /* + * The x_per_b holds the extra resource space that can be + * added for each bridge but there is the minimal already + * reserved as well so adjust x.start down accordingly to + * cover the whole space. + */ + io.start -= resource_size(res);

res = &dev->resource[PCI_BRIDGE_MEM_WINDOW]; align = pci_resource_alignment(dev, res); - mmio.end = align ? mmio.start + ALIGN_DOWN(mmio_per_hp, align) - 1 - : mmio.start + mmio_per_hp - 1; + mmio.end = align ? mmio.start + ALIGN_DOWN(mmio_per_b, align) - 1 + : mmio.start + mmio_per_b - 1; + mmio.start -= resource_size(res);

res = &dev->resource[PCI_BRIDGE_PREF_MEM_WINDOW]; align = pci_resource_alignment(dev, res); mmio_pref.end = align ? mmio_pref.start + - ALIGN_DOWN(mmio_pref_per_hp, align) - 1 - : mmio_pref.start + mmio_pref_per_hp - 1; + ALIGN_DOWN(mmio_pref_per_b, align) - 1 + : mmio_pref.start + mmio_pref_per_b - 1; + mmio_pref.start -= resource_size(res);

pci_bus_distribute_available_resources(b, add_list, io, mmio, mmio_pref);

From: Greg Kroah-Hartman gregkh@linuxfoundation.org

[ Upstream commit 04a189c720aa2b6091442113ce9b9bc93552dff8 ]

When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

Cc: Jiri Slaby jirislaby@kernel.org Link: https://lore.kernel.org/r/20230202141221.2293012-1-gregkh@linuxfoundation.or... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/tty/serial/pch_uart.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index 9576ba8bbc40e..cc83b772b7ca9 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -1775,7 +1775,7 @@ static void pch_uart_exit_port(struct eg20t_port *priv) char name[32];

snprintf(name, sizeof(name), "uart%d_regs", priv->port.line); - debugfs_remove(debugfs_lookup(name, NULL)); + debugfs_lookup_and_remove(name, NULL); uart_remove_one_port(&pch_uart_driver, &priv->port); free_page((unsigned long)priv->rxbuf.buf); }

From: Greg Kroah-Hartman gregkh@linuxfoundation.org

[ Upstream commit 8deb87b1e810dd558371e88ffd44339fbef27870 ]

When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

Cc: "Rafael J. Wysocki" rafael@kernel.org Link: https://lore.kernel.org/r/20230202141621.2296458-1-gregkh@linuxfoundation.or... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/base/component.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/base/component.c b/drivers/base/component.c index 5eadeac6c5322..7dbf14a1d9157 100644 --- a/drivers/base/component.c +++ b/drivers/base/component.c @@ -125,7 +125,7 @@ static void component_debugfs_add(struct aggregate_device *m)

static void component_debugfs_del(struct aggregate_device *m) { - debugfs_remove(debugfs_lookup(dev_name(m->parent), component_debugfs_dir)); + debugfs_lookup_and_remove(dev_name(m->parent), component_debugfs_dir); }

#else

From: Greg Kroah-Hartman gregkh@linuxfoundation.org

[ Upstream commit 5f5139974c2030e0937d3ae01f17da1238281f11 ]

When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

Link: https://lore.kernel.org/r/20230202151214.2306822-1-gregkh@linuxfoundation.or... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/time/test_udelay.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/kernel/time/test_udelay.c b/kernel/time/test_udelay.c index 13b11eb62685e..20d5df631570e 100644 --- a/kernel/time/test_udelay.c +++ b/kernel/time/test_udelay.c @@ -149,7 +149,7 @@ module_init(udelay_test_init); static void __exit udelay_test_exit(void) { mutex_lock(&udelay_test_lock); - debugfs_remove(debugfs_lookup(DEBUGFS_FILENAME, NULL)); + debugfs_lookup_and_remove(DEBUGFS_FILENAME, NULL); mutex_unlock(&udelay_test_lock); }

From: Greg Kroah-Hartman gregkh@linuxfoundation.org

[ Upstream commit 2bb3669f576559db273efe49e0e69f82450efbca ]

When calling debugfs_lookup() the result must have dput() called on it, otherwise the memory will leak over time. To make things simpler, just call debugfs_lookup_and_remove() instead which handles all of the logic at once.

Cc: Andrew Morton akpm@linux-foundation.org Reviewed-by: Yang Yingliang yangyingliang@huawei.com Link: https://lore.kernel.org/r/20230202151633.2310897-1-gregkh@linuxfoundation.or... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/fail_function.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)

diff --git a/kernel/fail_function.c b/kernel/fail_function.c index a7ccd2930c5f4..d971a01893197 100644 --- a/kernel/fail_function.c +++ b/kernel/fail_function.c @@ -163,10 +163,7 @@ static void fei_debugfs_add_attr(struct fei_attr *attr)

static void fei_debugfs_remove_attr(struct fei_attr *attr) { - struct dentry *dir; - - dir = debugfs_lookup(attr->kp.symbol_name, fei_debugfs_dir); - debugfs_remove_recursive(dir); + debugfs_lookup_and_remove(attr->kp.symbol_name, fei_debugfs_dir); }

static int fei_kprobe_handler(struct kprobe *kp, struct pt_regs *regs)

From: Mengyuan Lou mengyuanlou@net-swift.com

[ Upstream commit a2b9b123ccac913e9f9b80337d687a2fe786a634 ]

Wangxun has verified there is no peer-to-peer between functions for the below selection of SFxxx, RP1000 and RP2000 NICS. They may be multi-function devices, but the hardware does not advertise ACS capability.

Add an ACS quirk for these devices so the functions can be in independent IOMMU groups.

Link: https://lore.kernel.org/r/20230207102419.44326-1-mengyuanlou@net-swift.com Signed-off-by: Mengyuan Lou mengyuanlou@net-swift.com Signed-off-by: Bjorn Helgaas bhelgaas@google.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/quirks.c | 22 ++++++++++++++++++++++ include/linux/pci_ids.h | 2 ++ 2 files changed, 24 insertions(+)

diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 285acc4aaccc1..13290048beda8 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -4835,6 +4835,26 @@ static int pci_quirk_brcm_acs(struct pci_dev *dev, u16 acs_flags) PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF); }

+/* + * Wangxun 10G/1G NICs have no ACS capability, and on multi-function + * devices, peer-to-peer transactions are not be used between the functions. + * So add an ACS quirk for below devices to isolate functions. + * SFxxx 1G NICs(em). + * RP1000/RP2000 10G NICs(sp). + */ +static int pci_quirk_wangxun_nic_acs(struct pci_dev *dev, u16 acs_flags) +{ + switch (dev->device) { + case 0x0100 ... 0x010F: + case 0x1001: + case 0x2001: + return pci_acs_ctrl_enabled(acs_flags, + PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF); + } + + return false; +} + static const struct pci_dev_acs_enabled { u16 vendor; u16 device; @@ -4980,6 +5000,8 @@ static const struct pci_dev_acs_enabled { { PCI_VENDOR_ID_NXP, 0x8d9b, pci_quirk_nxp_rp_acs }, /* Zhaoxin Root/Downstream Ports */ { PCI_VENDOR_ID_ZHAOXIN, PCI_ANY_ID, pci_quirk_zhaoxin_pcie_ports_acs }, + /* Wangxun nics */ + { PCI_VENDOR_ID_WANGXUN, PCI_ANY_ID, pci_quirk_wangxun_nic_acs }, { 0 } };

diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index b362d90eb9b0b..bc8f484cdcf3b 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -3012,6 +3012,8 @@ #define PCI_DEVICE_ID_INTEL_VMD_9A0B 0x9a0b #define PCI_DEVICE_ID_INTEL_S21152BB 0xb152

+#define PCI_VENDOR_ID_WANGXUN 0x8088 + #define PCI_VENDOR_ID_SCALEMP 0x8686 #define PCI_DEVICE_ID_SCALEMP_VSMP_CTL 0x1010

From: Jiapeng Chong jiapeng.chong@linux.alibaba.com

[ Upstream commit f765c59c5a72546a2d74a92ae5d0eb0329d8e247 ]

The dp and ufp are defined as bool type, the return value type of function extcon_get_state should be int, so the type of dp and ufp are modified to int.

./drivers/phy/rockchip/phy-rockchip-typec.c:827:12-14: WARNING: Unsigned expression compared with zero: dp > 0.

Reported-by: Abaci Robot abaci@linux.alibaba.com Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3962 Signed-off-by: Jiapeng Chong jiapeng.chong@linux.alibaba.com Link: https://lore.kernel.org/r/20230213035709.99027-1-jiapeng.chong@linux.alibaba... Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/phy/rockchip/phy-rockchip-typec.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-typec.c b/drivers/phy/rockchip/phy-rockchip-typec.c index d76440ae10ff4..3a594b8cbe1ab 100644 --- a/drivers/phy/rockchip/phy-rockchip-typec.c +++ b/drivers/phy/rockchip/phy-rockchip-typec.c @@ -808,9 +808,8 @@ static int tcphy_get_mode(struct rockchip_typec_phy *tcphy) struct extcon_dev *edev = tcphy->extcon; union extcon_property_value property; unsigned int id; - bool ufp, dp; u8 mode; - int ret; + int ret, ufp, dp;

if (!edev) return MODE_DFP_USB;

From: Vasant Hegde vasant.hegde@amd.com

[ Upstream commit 2cc73c5712f97de98c38c2fafc1f288354a9f3c3 ]

iommu_attach_group() attaches all devices in a group to domain and then sets group domain (group->domain). Current code (__iommu_attach_group()) does not handle error path. This creates problem as devices to domain attachment is in inconsistent state.

Flow: - During boot iommu attach devices to default domain - Later some device driver (like amd/iommu_v2 or vfio) tries to attach device to new domain. - In iommu_attach_group() path we detach device from current domain. Then it tries to attach devices to new domain. - If it fails to attach device to new domain then device to domain link is broken. - iommu_attach_group() returns error. - At this stage iommu_attach_group() caller thinks, attaching device to new domain failed and devices are still attached to old domain. - But in reality device to old domain link is broken. It will result in all sort of failures (like IO page fault) later.

To recover from this situation, we need to attach all devices back to the old domain. Also log warning if it fails attach device back to old domain.

Suggested-by: Lu Baolu baolu.lu@linux.intel.com Reported-by: Matt Fagnani matt.fagnani@bell.net Signed-off-by: Vasant Hegde vasant.hegde@amd.com Reviewed-by: Jason Gunthorpe jgg@nvidia.com Tested-by: Matt Fagnani matt.fagnani@bell.net Link: https://lore.kernel.org/r/20230215052642.6016-1-vasant.hegde@amd.com Link: https://bugzilla.kernel.org/show_bug.cgi?id=216865 Link: https://lore.kernel.org/lkml/15d0f9ff-2a56-b3e9-5b45-e6b23300ae3b@leemhuis.i... Signed-off-by: Joerg Roedel jroedel@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iommu/iommu.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-)

diff --git a/drivers/iommu/iommu.c b/drivers/iommu/iommu.c index 54e1306a99a47..f91b5b1a39e3b 100644 --- a/drivers/iommu/iommu.c +++ b/drivers/iommu/iommu.c @@ -2126,8 +2126,22 @@ static int __iommu_attach_group(struct iommu_domain *domain,

ret = __iommu_group_for_each_dev(group, domain, iommu_group_do_attach_device); - if (ret == 0) + if (ret == 0) { group->domain = domain; + } else { + /* + * To recover from the case when certain device within the + * group fails to attach to the new domain, we need force + * attaching all devices back to the old domain. The old + * domain is compatible for all devices in the group, + * hence the iommu driver should always return success. + */ + struct iommu_domain *old_domain = group->domain; + + group->domain = NULL; + WARN(__iommu_group_set_domain(group, old_domain), + "iommu driver failed to attach a compatible domain"); + }

return ret; }

From: Richard Fitzgerald rf@opensource.cirrus.com

[ Upstream commit 0603a47bd3a8f439d7844b841eee1819353063e0 ]

If wait_for_completion_timeout() times-out in _cdns_xfer_msg() it is possible that something could have been written to the RX FIFO. In this case, we should drain the RX FIFO so that anything in it doesn't carry over and mess up the next transfer.

Obviously, if we got to this state something went wrong, and we don't really know the state of everything. The cleanup in this situation cannot be bullet-proof but we should attempt to avoid breaking future transaction, if only to reduce the amount of error noise when debugging the failure from a kernel log.

Note that this patch only implements the draining for blocking (non-deferred) transfers. The deferred API doesn't have any proper handling of error conditions and would need some re-design before implementing cleanup. That is a task for a separate patch...

Signed-off-by: Richard Fitzgerald rf@opensource.cirrus.com Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20221202161812.4186897-4-rf@opensource.cirrus.com Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/soundwire/cadence_master.c | 50 ++++++++++++++++-------------- 1 file changed, 27 insertions(+), 23 deletions(-)

diff --git a/drivers/soundwire/cadence_master.c b/drivers/soundwire/cadence_master.c index 37eef80939475..901052dfe420a 100644 --- a/drivers/soundwire/cadence_master.c +++ b/drivers/soundwire/cadence_master.c @@ -554,6 +554,29 @@ cdns_fill_msg_resp(struct sdw_cdns *cdns, return SDW_CMD_OK; }

+static void cdns_read_response(struct sdw_cdns *cdns) +{ + u32 num_resp, cmd_base; + int i; + + /* RX_FIFO_AVAIL can be 2 entries more than the FIFO size */ + BUILD_BUG_ON(ARRAY_SIZE(cdns->response_buf) < CDNS_MCP_CMD_LEN + 2); + + num_resp = cdns_readl(cdns, CDNS_MCP_FIFOSTAT); + num_resp &= CDNS_MCP_RX_FIFO_AVAIL; + if (num_resp > ARRAY_SIZE(cdns->response_buf)) { + dev_warn(cdns->dev, "RX AVAIL %d too long\n", num_resp); + num_resp = ARRAY_SIZE(cdns->response_buf); + } + + cmd_base = CDNS_MCP_CMD_BASE; + + for (i = 0; i < num_resp; i++) { + cdns->response_buf[i] = cdns_readl(cdns, cmd_base); + cmd_base += CDNS_MCP_CMD_WORD_LEN; + } +} + static enum sdw_command_response _cdns_xfer_msg(struct sdw_cdns *cdns, struct sdw_msg *msg, int cmd, int offset, int count, bool defer) @@ -595,6 +618,10 @@ _cdns_xfer_msg(struct sdw_cdns *cdns, struct sdw_msg *msg, int cmd, dev_err(cdns->dev, "IO transfer timed out, cmd %d device %d addr %x len %d\n", cmd, msg->dev_num, msg->addr, msg->len); msg->len = 0; + + /* Drain anything in the RX_FIFO */ + cdns_read_response(cdns); + return SDW_CMD_TIMEOUT; }

@@ -768,29 +795,6 @@ EXPORT_SYMBOL(cdns_read_ping_status); * IRQ handling */

-static void cdns_read_response(struct sdw_cdns *cdns) -{ - u32 num_resp, cmd_base; - int i; - - /* RX_FIFO_AVAIL can be 2 entries more than the FIFO size */ - BUILD_BUG_ON(ARRAY_SIZE(cdns->response_buf) < CDNS_MCP_CMD_LEN + 2); - - num_resp = cdns_readl(cdns, CDNS_MCP_FIFOSTAT); - num_resp &= CDNS_MCP_RX_FIFO_AVAIL; - if (num_resp > ARRAY_SIZE(cdns->response_buf)) { - dev_warn(cdns->dev, "RX AVAIL %d too long\n", num_resp); - num_resp = ARRAY_SIZE(cdns->response_buf); - } - - cmd_base = CDNS_MCP_CMD_BASE; - - for (i = 0; i < num_resp; i++) { - cdns->response_buf[i] = cdns_readl(cdns, cmd_base); - cmd_base += CDNS_MCP_CMD_WORD_LEN; - } -} - static int cdns_update_slave_status(struct sdw_cdns *cdns, u64 slave_intstat) {