Commit e0d795e4f36c ("usb: irda: cleanup on ir-usb module") added a USB IrDA header with common defines, but mistakingly switched to using the class-descriptor baud-rate bitmask values for the outbound header.

This broke link-speed handling for rates above 9600 baud, but a device would also be able to operate at the default 9600 baud until a link-speed request was issued (e.g. using the TCGETS ioctl).

Fixes: e0d795e4f36c ("usb: irda: cleanup on ir-usb module") Cc: stable stable@vger.kernel.org # 2.6.27 Cc: Felipe Balbi balbi@kernel.org Signed-off-by: Johan Hovold johan@kernel.org --- drivers/usb/serial/ir-usb.c | 20 ++++++++++---------- include/linux/usb/irda.h | 13 ++++++++++++- 2 files changed, 22 insertions(+), 11 deletions(-)

diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c index c3b06fc5a7f0..26eab1307165 100644 --- a/drivers/usb/serial/ir-usb.c +++ b/drivers/usb/serial/ir-usb.c @@ -335,34 +335,34 @@ static void ir_set_termios(struct tty_struct *tty,

switch (baud) { case 2400: - ir_baud = USB_IRDA_BR_2400; + ir_baud = USB_IRDA_LS_2400; break; case 9600: - ir_baud = USB_IRDA_BR_9600; + ir_baud = USB_IRDA_LS_9600; break; case 19200: - ir_baud = USB_IRDA_BR_19200; + ir_baud = USB_IRDA_LS_19200; break; case 38400: - ir_baud = USB_IRDA_BR_38400; + ir_baud = USB_IRDA_LS_38400; break; case 57600: - ir_baud = USB_IRDA_BR_57600; + ir_baud = USB_IRDA_LS_57600; break; case 115200: - ir_baud = USB_IRDA_BR_115200; + ir_baud = USB_IRDA_LS_115200; break; case 576000: - ir_baud = USB_IRDA_BR_576000; + ir_baud = USB_IRDA_LS_576000; break; case 1152000: - ir_baud = USB_IRDA_BR_1152000; + ir_baud = USB_IRDA_LS_1152000; break; case 4000000: - ir_baud = USB_IRDA_BR_4000000; + ir_baud = USB_IRDA_LS_4000000; break; default: - ir_baud = USB_IRDA_BR_9600; + ir_baud = USB_IRDA_LS_9600; baud = 9600; }

diff --git a/include/linux/usb/irda.h b/include/linux/usb/irda.h index 396d2b043e64..556a801efce3 100644 --- a/include/linux/usb/irda.h +++ b/include/linux/usb/irda.h @@ -119,11 +119,22 @@ struct usb_irda_cs_descriptor { * 6 - 115200 bps * 7 - 576000 bps * 8 - 1.152 Mbps - * 9 - 5 mbps + * 9 - 4 Mbps * 10..15 - Reserved */ #define USB_IRDA_STATUS_LINK_SPEED 0x0f

+#define USB_IRDA_LS_NO_CHANGE 0 +#define USB_IRDA_LS_2400 1 +#define USB_IRDA_LS_9600 2 +#define USB_IRDA_LS_19200 3 +#define USB_IRDA_LS_38400 4 +#define USB_IRDA_LS_57600 5 +#define USB_IRDA_LS_115200 6 +#define USB_IRDA_LS_576000 7 +#define USB_IRDA_LS_1152000 8 +#define USB_IRDA_LS_4000000 9 + /* The following is a 4-bit value used only for * outbound header: *