From: "Ji-Ze Hong (Peter Hong)" hpeter@gmail.com
[ Upstream commit 4aaaaf0f279836f06d3b9d0ffeec7a1e1a04ceef ]
All temperature of Fintek superio hwmonitor that using 1-byte reg will use 2's complement.
In show_temp() temp = data->temp[nr] * 1000;
When data->temp[nr] read as 255, it indicate -1C, but this code will report 255C to userspace. It'll be ok when change to: temp = ((s8)data->temp[nr]) * 1000;
Signed-off-by: Ji-Ze Hong (Peter Hong) hpeter+linux_kernel@gmail.com Link: https://lore.kernel.org/r/20220418090706.6339-1-hpeter+linux_kernel@gmail.co... Signed-off-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hwmon/f71882fg.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/hwmon/f71882fg.c b/drivers/hwmon/f71882fg.c index ca54ce5c8e10..4010b61743f5 100644 --- a/drivers/hwmon/f71882fg.c +++ b/drivers/hwmon/f71882fg.c @@ -1590,8 +1590,9 @@ static ssize_t show_temp(struct device *dev, struct device_attribute *devattr, temp *= 125; if (sign) temp -= 128000; - } else - temp = data->temp[nr] * 1000; + } else { + temp = ((s8)data->temp[nr]) * 1000; + }
return sprintf(buf, "%d\n", temp); }
From: Mark Brown broonie@kernel.org
[ Upstream commit 2fbe467bcbfc760a08f08475eea6bbd4c2874319 ]
The max98090 driver has a custom put function for some controls which can only be updated in certain circumstances which makes no effort to validate that input is suitable for the control, allowing out of spec values to be written to the hardware and presented to userspace. Fix this by returning an error when invalid values are written.
Signed-off-by: Mark Brown broonie@kernel.org Link: https://lore.kernel.org/r/20220420193454.2647908-1-broonie@kernel.org Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/max98090.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/sound/soc/codecs/max98090.c b/sound/soc/codecs/max98090.c index a5b0c40ee545..6e5a4e757bf1 100644 --- a/sound/soc/codecs/max98090.c +++ b/sound/soc/codecs/max98090.c @@ -419,6 +419,9 @@ static int max98090_put_enab_tlv(struct snd_kcontrol *kcontrol,
val = (val >> mc->shift) & mask;
+ if (sel < 0 || sel > mc->max) + return -EINVAL; + *select = sel;
/* Setting a volume is only valid if it is already On */
From: Mark Brown broonie@kernel.org
[ Upstream commit 13fcf676d9e102594effc686d98521ff5c90b925 ]
The max98090 driver has some custom controls which share a put() function which returns 0 unconditionally, meaning that events are not generated when the value changes. Fix that.
Signed-off-by: Mark Brown broonie@kernel.org Link: https://lore.kernel.org/r/20220420193454.2647908-2-broonie@kernel.org Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/max98090.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/codecs/max98090.c b/sound/soc/codecs/max98090.c index 6e5a4e757bf1..b9f15a260c78 100644 --- a/sound/soc/codecs/max98090.c +++ b/sound/soc/codecs/max98090.c @@ -436,7 +436,7 @@ static int max98090_put_enab_tlv(struct snd_kcontrol *kcontrol, mask << mc->shift, sel << mc->shift);
- return 0; + return *select != val; }
static const char *max98090_perf_pwr_text[] =
From: Mark Brown broonie@kernel.org
[ Upstream commit aa22125c57f9e577f0a667e4fa07fc3fa8ca1e60 ]
Check that values written via snd_soc_put_volsw_range() are within the range advertised by the control, ensuring that we don't write out of spec values to the hardware.
Signed-off-by: Mark Brown broonie@kernel.org Link: https://lore.kernel.org/r/20220423131239.3375261-1-broonie@kernel.org Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/soc-ops.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-)
diff --git a/sound/soc/soc-ops.c b/sound/soc/soc-ops.c index c88bc6bb41cf..7a37312c8e0c 100644 --- a/sound/soc/soc-ops.c +++ b/sound/soc/soc-ops.c @@ -523,7 +523,15 @@ int snd_soc_put_volsw_range(struct snd_kcontrol *kcontrol, unsigned int mask = (1 << fls(max)) - 1; unsigned int invert = mc->invert; unsigned int val, val_mask; - int err, ret; + int err, ret, tmp; + + tmp = ucontrol->value.integer.value[0]; + if (tmp < 0) + return -EINVAL; + if (mc->platform_max && tmp > mc->platform_max) + return -EINVAL; + if (tmp > mc->max - mc->min + 1) + return -EINVAL;
if (invert) val = (max - ucontrol->value.integer.value[0]) & mask; @@ -538,6 +546,14 @@ int snd_soc_put_volsw_range(struct snd_kcontrol *kcontrol, ret = err;
if (snd_soc_volsw_is_stereo(mc)) { + tmp = ucontrol->value.integer.value[1]; + if (tmp < 0) + return -EINVAL; + if (mc->platform_max && tmp > mc->platform_max) + return -EINVAL; + if (tmp > mc->max - mc->min + 1) + return -EINVAL; + if (invert) val = (max - ucontrol->value.integer.value[1]) & mask; else
From: Sven Schnelle svens@linux.ibm.com
[ Upstream commit 8b202ee218395319aec1ef44f72043e1fbaccdd6 ]
gcc-12 shows a lot of array bound warnings on s390. This is caused by the S390_lowcore macro which uses a hardcoded address of 0.
Wrapping that with absolute_pointer() works, but gcc no longer knows that a 12 bit displacement is sufficient to access lowcore. So it emits instructions like 'lghi %r1,0; l %rx,xxx(%r1)' instead of a single load/store instruction. As s390 stores variables often read/written in lowcore, this is considered problematic. Therefore disable -Warray-bounds on s390 for gcc-12 for the time being, until there is a better solution.
Signed-off-by: Sven Schnelle svens@linux.ibm.com Link: https://lore.kernel.org/r/yt9dzgkelelc.fsf@linux.ibm.com Link: https://lore.kernel.org/r/20220422134308.1613610-1-svens@linux.ibm.com Link: https://lore.kernel.org/r/20220425121742.3222133-1-svens@linux.ibm.com Signed-off-by: Heiko Carstens hca@linux.ibm.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/s390/Makefile | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/arch/s390/Makefile b/arch/s390/Makefile index 9a3a698c8fca..4d0082f3de47 100644 --- a/arch/s390/Makefile +++ b/arch/s390/Makefile @@ -27,6 +27,16 @@ KBUILD_CFLAGS_DECOMPRESSOR += $(call cc-option,-ffreestanding) KBUILD_CFLAGS_DECOMPRESSOR += $(call cc-disable-warning, address-of-packed-member) KBUILD_CFLAGS_DECOMPRESSOR += $(if $(CONFIG_DEBUG_INFO),-g) KBUILD_CFLAGS_DECOMPRESSOR += $(if $(CONFIG_DEBUG_INFO_DWARF4), $(call cc-option, -gdwarf-4,)) + +ifdef CONFIG_CC_IS_GCC + ifeq ($(call cc-ifversion, -ge, 1200, y), y) + ifeq ($(call cc-ifversion, -lt, 1300, y), y) + KBUILD_CFLAGS += $(call cc-disable-warning, array-bounds) + KBUILD_CFLAGS_DECOMPRESSOR += $(call cc-disable-warning, array-bounds) + endif + endif +endif + UTS_MACHINE := s390x STACK_SIZE := 16384 CHECKFLAGS += -D__s390__ -D__s390x__
From: Eric Dumazet edumazet@google.com
[ Upstream commit 4dfa9b438ee34caca4e6a4e5e961641807367f6f ]
In order to limit the ability for an observer to recognize the source ports sequence used to contact a set of destinations, we should periodically shuffle the secret. 10 seconds looks effective enough without causing particular issues.
Cc: Moshe Kol moshe.kol@mail.huji.ac.il Cc: Yossi Gilad yossi.gilad@mail.huji.ac.il Cc: Amit Klein aksecurity@gmail.com Cc: Jason A. Donenfeld Jason@zx2c4.com Tested-by: Willy Tarreau w@1wt.eu Signed-off-by: Eric Dumazet edumazet@google.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/core/secure_seq.c | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-)
diff --git a/net/core/secure_seq.c b/net/core/secure_seq.c index af6ad467ed61..3a8128341e6a 100644 --- a/net/core/secure_seq.c +++ b/net/core/secure_seq.c @@ -22,6 +22,8 @@ static siphash_key_t net_secret __read_mostly; static siphash_key_t ts_secret __read_mostly;
+#define EPHEMERAL_PORT_SHUFFLE_PERIOD (10 * HZ) + static __always_inline void net_secret_init(void) { net_get_random_once(&net_secret, sizeof(net_secret)); @@ -100,11 +102,13 @@ u32 secure_ipv6_port_ephemeral(const __be32 *saddr, const __be32 *daddr, const struct { struct in6_addr saddr; struct in6_addr daddr; + unsigned int timeseed; __be16 dport; } __aligned(SIPHASH_ALIGNMENT) combined = { .saddr = *(struct in6_addr *)saddr, .daddr = *(struct in6_addr *)daddr, - .dport = dport + .timeseed = jiffies / EPHEMERAL_PORT_SHUFFLE_PERIOD, + .dport = dport, }; net_secret_init(); return siphash(&combined, offsetofend(typeof(combined), dport), @@ -145,8 +149,10 @@ EXPORT_SYMBOL_GPL(secure_tcp_seq); u32 secure_ipv4_port_ephemeral(__be32 saddr, __be32 daddr, __be16 dport) { net_secret_init(); - return siphash_3u32((__force u32)saddr, (__force u32)daddr, - (__force u16)dport, &net_secret); + return siphash_4u32((__force u32)saddr, (__force u32)daddr, + (__force u16)dport, + jiffies / EPHEMERAL_PORT_SHUFFLE_PERIOD, + &net_secret); } EXPORT_SYMBOL_GPL(secure_ipv4_port_ephemeral); #endif
linux-stable-mirror@lists.linaro.org
-
Sasha Levin