Side effect may happen if use or operator to set schedule parameters when the parameters are already set before. Set them directly due to other bits are reserved.
Fixes: 54f6a8af3722 ("usb: xhci-mtk: skip dropping bandwidth of unchecked endpoints") Cc: stable stable@vger.kernel.org Signed-off-by: Chunfeng Yun chunfeng.yun@mediatek.com --- drivers/usb/host/xhci-mtk-sch.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/host/xhci-mtk-sch.c b/drivers/usb/host/xhci-mtk-sch.c index b45e5bf08997..5891f56c64da 100644 --- a/drivers/usb/host/xhci-mtk-sch.c +++ b/drivers/usb/host/xhci-mtk-sch.c @@ -643,7 +643,7 @@ int xhci_mtk_add_ep_quirk(struct usb_hcd *hcd, struct usb_device *udev, */ if (usb_endpoint_xfer_int(&ep->desc) || usb_endpoint_xfer_isoc(&ep->desc)) - ep_ctx->reserved[0] |= cpu_to_le32(EP_BPKTS(1)); + ep_ctx->reserved[0] = cpu_to_le32(EP_BPKTS(1));
return 0; } @@ -730,10 +730,10 @@ int xhci_mtk_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) list_move_tail(&sch_ep->endpoint, &sch_bw->bw_ep_list);
ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index); - ep_ctx->reserved[0] |= cpu_to_le32(EP_BPKTS(sch_ep->pkts) + ep_ctx->reserved[0] = cpu_to_le32(EP_BPKTS(sch_ep->pkts) | EP_BCSCOUNT(sch_ep->cs_count) | EP_BBM(sch_ep->burst_mode)); - ep_ctx->reserved[1] |= cpu_to_le32(EP_BOFFSET(sch_ep->offset) + ep_ctx->reserved[1] = cpu_to_le32(EP_BOFFSET(sch_ep->offset) | EP_BREPEAT(sch_ep->repeat));
xhci_dbg(xhci, " PKTS:%x, CSCOUNT:%x, BM:%x, OFFSET:%x, REPEAT:%x\n",
When the USB headset is plug into an external hub, sometimes can't set config due to not enough bandwidth, so need improve LS/FS INT/ISOC bandwidth scheduling with TT.
Fixes: 54f6a8af3722 ("usb: xhci-mtk: skip dropping bandwidth of unchecked endpoints") Cc: stable stable@vger.kernel.org Signed-off-by: Yaqii Wu yaqii.wu@mediatek.com Signed-off-by: Chunfeng Yun chunfeng.yun@mediatek.com --- drivers/usb/host/xhci-mtk-sch.c | 74 ++++++++++++++++++++++++++------- drivers/usb/host/xhci-mtk.h | 6 ++- 2 files changed, 64 insertions(+), 16 deletions(-)
diff --git a/drivers/usb/host/xhci-mtk-sch.c b/drivers/usb/host/xhci-mtk-sch.c index 5891f56c64da..8950d1f10a7f 100644 --- a/drivers/usb/host/xhci-mtk-sch.c +++ b/drivers/usb/host/xhci-mtk-sch.c @@ -378,6 +378,31 @@ static void update_bus_bw(struct mu3h_sch_bw_info *sch_bw, sch_ep->allocated = used; }
+static int check_fs_bus_bw(struct mu3h_sch_ep_info *sch_ep, int offset) +{ + struct mu3h_sch_tt *tt = sch_ep->sch_tt; + u32 num_esit, tmp; + int base; + int i, j; + + num_esit = XHCI_MTK_MAX_ESIT / sch_ep->esit; + for (i = 0; i < num_esit; i++) { + base = offset + i * sch_ep->esit; + + /* + * Compared with hs bus, no matter what ep type, + * the hub will always delay one uframe to send data + */ + for (j = 0; j < sch_ep->cs_count; j++) { + tmp = tt->fs_bus_bw[base + j] + sch_ep->bw_cost_per_microframe; + if (tmp > FS_PAYLOAD_MAX) + return -ERANGE; + } + } + + return 0; +} + static int check_sch_tt(struct usb_device *udev, struct mu3h_sch_ep_info *sch_ep, u32 offset) { @@ -402,7 +427,7 @@ static int check_sch_tt(struct usb_device *udev, return -ERANGE;
for (i = 0; i < sch_ep->cs_count; i++) - if (test_bit(offset + i, tt->split_bit_map)) + if (test_bit(offset + i, tt->ss_bit_map)) return -ERANGE;
} else { @@ -432,7 +457,7 @@ static int check_sch_tt(struct usb_device *udev, cs_count = 7; /* HW limit */
for (i = 0; i < cs_count + 2; i++) { - if (test_bit(offset + i, tt->split_bit_map)) + if (test_bit(offset + i, tt->ss_bit_map)) return -ERANGE; }
@@ -448,24 +473,44 @@ static int check_sch_tt(struct usb_device *udev, sch_ep->num_budget_microframes = sch_ep->esit; }
- return 0; + return check_fs_bus_bw(sch_ep, offset); }
static void update_sch_tt(struct usb_device *udev, - struct mu3h_sch_ep_info *sch_ep) + struct mu3h_sch_ep_info *sch_ep, bool used) { struct mu3h_sch_tt *tt = sch_ep->sch_tt; u32 base, num_esit; + int bw_updated; + int bits; int i, j;
num_esit = XHCI_MTK_MAX_ESIT / sch_ep->esit; + bits = (sch_ep->ep_type == ISOC_OUT_EP) ? sch_ep->cs_count : 1; + + if (used) + bw_updated = sch_ep->bw_cost_per_microframe; + else + bw_updated = -sch_ep->bw_cost_per_microframe; + for (i = 0; i < num_esit; i++) { base = sch_ep->offset + i * sch_ep->esit; - for (j = 0; j < sch_ep->num_budget_microframes; j++) - set_bit(base + j, tt->split_bit_map); + + for (j = 0; j < bits; j++) { + if (used) + set_bit(base + j, tt->ss_bit_map); + else + clear_bit(base + j, tt->ss_bit_map); + } + + for (j = 0; j < sch_ep->cs_count; j++) + tt->fs_bus_bw[base + j] += bw_updated; }
- list_add_tail(&sch_ep->tt_endpoint, &tt->ep_list); + if (used) + list_add_tail(&sch_ep->tt_endpoint, &tt->ep_list); + else + list_del(&sch_ep->tt_endpoint); }
static int check_sch_bw(struct usb_device *udev, @@ -535,7 +580,7 @@ static int check_sch_bw(struct usb_device *udev, if (!tt_offset_ok) return -ERANGE;
- update_sch_tt(udev, sch_ep); + update_sch_tt(udev, sch_ep, 1); }
/* update bus bandwidth info */ @@ -548,15 +593,16 @@ static void destroy_sch_ep(struct usb_device *udev, struct mu3h_sch_bw_info *sch_bw, struct mu3h_sch_ep_info *sch_ep) { /* only release ep bw check passed by check_sch_bw() */ - if (sch_ep->allocated) + if (sch_ep->allocated) { update_bus_bw(sch_bw, sch_ep, 0); + if (sch_ep->sch_tt) + update_sch_tt(udev, sch_ep, 0); + }
- list_del(&sch_ep->endpoint); - - if (sch_ep->sch_tt) { - list_del(&sch_ep->tt_endpoint); + if (sch_ep->sch_tt) drop_tt(udev); - } + + list_del(&sch_ep->endpoint); kfree(sch_ep); }
diff --git a/drivers/usb/host/xhci-mtk.h b/drivers/usb/host/xhci-mtk.h index cbb09dfea62e..f42769c69249 100644 --- a/drivers/usb/host/xhci-mtk.h +++ b/drivers/usb/host/xhci-mtk.h @@ -20,13 +20,15 @@ #define XHCI_MTK_MAX_ESIT 64
/** - * @split_bit_map: used to avoid split microframes overlay + * @ss_bit_map: used to avoid start split microframes overlay + * @fs_bus_bw: array to keep track of bandwidth already used for FS * @ep_list: Endpoints using this TT * @usb_tt: usb TT related * @tt_port: TT port number */ struct mu3h_sch_tt { - DECLARE_BITMAP(split_bit_map, XHCI_MTK_MAX_ESIT); + DECLARE_BITMAP(ss_bit_map, XHCI_MTK_MAX_ESIT); + u32 fs_bus_bw[XHCI_MTK_MAX_ESIT]; struct list_head ep_list; struct usb_tt *usb_tt; int tt_port;
linux-stable-mirror@lists.linaro.org
-
Chunfeng Yun