In commit 9d9491a7da2a ("mmc: dw_mmc: Fix the DTO timeout calculation") and commit 4c2357f57dd5 ("mmc: dw_mmc: Fix the CTO timeout calculation") have been made changes which cause multiply overflow for 32-bit systems. The broken timeout calculations leads to unexpected ETIMEDOUT errors and causes stacktrace splat (such as below) during normal data exchange with SD-card.
| Running : 4M-check-reassembly-tcp-cmykw2-rotatew2.out -v0 -w1 | - Info: Finished target initialization. | mmcblk0: error -110 transferring data, sector 320544, nr 2048, cmd response | 0x900, card status 0x0
DIV_ROUND_UP_ULL helps to escape usage of __udivdi3() from libgcc and so code gets compiled on all 32-bit platforms as opposed to usage of DIV_ROUND_UP when we may only compile stuff on a very few arches.
Lets cast this multiply to u64 type which prevents overflow.
Tested-by: Vineet Gupta Vineet.Gupta1@synopsys.com Reported-by: Vineet Gupta Vineet.Gupta1@synopsys.com # ARC STAR 9001306872 HSDK, sdio: board crashes when copying big files Fixes: 9d9491a7da2a ("mmc: dw_mmc: Fix the DTO timeout calculation") Fixes: 4c2357f57dd5 ("mmc: dw_mmc: Fix the CTO timeout calculation")
Signed-off-by: Evgeniy Didin Evgeniy.Didin@synopsys.com
CC: Alexey Brodkin abrodkin@synopsys.com CC: Eugeniy Paltsev paltsev@synopsys.com CC: Douglas Anderson dianders@chromium.org CC: Ulf Hansson ulf.hansson@linaro.org CC: Andy Shevchenko andy.shevchenko@gmail.com CC: Jisheng Zhang Jisheng.Zhang@synaptics.com CC: Shawn Lin shawn.lin@rock-chips.com CC: Vineet Gupta Vineet.Gupta1@synopsys.com CC: linux-kernel@vger.kernel.org CC: linux-snps-arc@lists.infradead.org Cc: stable@vger.kernel.org --- Changes since v3: -Switch DIV_ROUND_UP macro to DIV_ROUND_UP_ULL -Make one patch from two patches -Modify commit message
Changes sinve v2: -add fix for cto_ms
Changes since v1: -uint64_t switched to u64
drivers/mmc/host/dw_mmc.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 0aa39975f33b..cba534d4c81b 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -409,7 +409,9 @@ static inline void dw_mci_set_cto(struct dw_mci *host) cto_div = (mci_readl(host, CLKDIV) & 0xff) * 2; if (cto_div == 0) cto_div = 1; - cto_ms = DIV_ROUND_UP(MSEC_PER_SEC * cto_clks * cto_div, host->bus_hz); + + cto_ms = DIV_ROUND_UP_ULL((u64)MSEC_PER_SEC * cto_clks * cto_div, + host->bus_hz);
/* add a bit spare time */ cto_ms += 10; @@ -1944,8 +1946,9 @@ static void dw_mci_set_drto(struct dw_mci *host) drto_div = (mci_readl(host, CLKDIV) & 0xff) * 2; if (drto_div == 0) drto_div = 1; - drto_ms = DIV_ROUND_UP(MSEC_PER_SEC * drto_clks * drto_div, - host->bus_hz); + + drto_ms = DIV_ROUND_UP_ULL((u64)MSEC_PER_SEC * drto_clks * drto_div, + host->bus_hz);
/* add a bit spare time */ drto_ms += 10;
On Wed, Feb 28, 2018 at 1:53 PM, Evgeniy Didin Evgeniy.Didin@synopsys.com wrote:
In commit 9d9491a7da2a ("mmc: dw_mmc: Fix the DTO timeout calculation") and commit 4c2357f57dd5 ("mmc: dw_mmc: Fix the CTO timeout calculation") have been made changes which cause multiply overflow for 32-bit systems. The broken timeout calculations leads to unexpected ETIMEDOUT errors and causes stacktrace splat (such as below) during normal data exchange with SD-card.
| Running : 4M-check-reassembly-tcp-cmykw2-rotatew2.out -v0 -w1 | - Info: Finished target initialization. | mmcblk0: error -110 transferring data, sector 320544, nr 2048, cmd response | 0x900, card status 0x0
DIV_ROUND_UP_ULL helps to escape usage of __udivdi3() from libgcc and so code gets compiled on all 32-bit platforms as opposed to usage of DIV_ROUND_UP when we may only compile stuff on a very few arches.
Lets cast this multiply to u64 type which prevents overflow.
FWIW, Reviewed-by: Andy Shevchenko andy.shevchenko@gmail.com
Tested-by: Vineet Gupta Vineet.Gupta1@synopsys.com Reported-by: Vineet Gupta Vineet.Gupta1@synopsys.com # ARC STAR 9001306872 HSDK, sdio: board crashes when copying big files Fixes: 9d9491a7da2a ("mmc: dw_mmc: Fix the DTO timeout calculation") Fixes: 4c2357f57dd5 ("mmc: dw_mmc: Fix the CTO timeout calculation")
Signed-off-by: Evgeniy Didin Evgeniy.Didin@synopsys.com
CC: Alexey Brodkin abrodkin@synopsys.com CC: Eugeniy Paltsev paltsev@synopsys.com CC: Douglas Anderson dianders@chromium.org CC: Ulf Hansson ulf.hansson@linaro.org CC: Andy Shevchenko andy.shevchenko@gmail.com CC: Jisheng Zhang Jisheng.Zhang@synaptics.com CC: Shawn Lin shawn.lin@rock-chips.com CC: Vineet Gupta Vineet.Gupta1@synopsys.com CC: linux-kernel@vger.kernel.org CC: linux-snps-arc@lists.infradead.org Cc: stable@vger.kernel.org
Changes since v3: -Switch DIV_ROUND_UP macro to DIV_ROUND_UP_ULL -Make one patch from two patches -Modify commit message
Changes sinve v2: -add fix for cto_ms
Changes since v1: -uint64_t switched to u64
drivers/mmc/host/dw_mmc.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 0aa39975f33b..cba534d4c81b 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -409,7 +409,9 @@ static inline void dw_mci_set_cto(struct dw_mci *host) cto_div = (mci_readl(host, CLKDIV) & 0xff) * 2; if (cto_div == 0) cto_div = 1;
cto_ms = DIV_ROUND_UP(MSEC_PER_SEC * cto_clks * cto_div, host->bus_hz);
cto_ms = DIV_ROUND_UP_ULL((u64)MSEC_PER_SEC * cto_clks * cto_div,host->bus_hz); /* add a bit spare time */ cto_ms += 10;@@ -1944,8 +1946,9 @@ static void dw_mci_set_drto(struct dw_mci *host) drto_div = (mci_readl(host, CLKDIV) & 0xff) * 2; if (drto_div == 0) drto_div = 1;
drto_ms = DIV_ROUND_UP(MSEC_PER_SEC * drto_clks * drto_div,host->bus_hz);
drto_ms = DIV_ROUND_UP_ULL((u64)MSEC_PER_SEC * drto_clks * drto_div,host->bus_hz); /* add a bit spare time */ drto_ms += 10;-- 2.11.0
Hi,
On Wed, Feb 28, 2018 at 3:53 AM, Evgeniy Didin Evgeniy.Didin@synopsys.com wrote:
In commit 9d9491a7da2a ("mmc: dw_mmc: Fix the DTO timeout calculation") and commit 4c2357f57dd5 ("mmc: dw_mmc: Fix the CTO timeout calculation") have been made changes which cause multiply overflow for 32-bit systems. The broken timeout calculations leads to unexpected ETIMEDOUT errors and causes stacktrace splat (such as below) during normal data exchange with SD-card.
| Running : 4M-check-reassembly-tcp-cmykw2-rotatew2.out -v0 -w1 | - Info: Finished target initialization. | mmcblk0: error -110 transferring data, sector 320544, nr 2048, cmd response | 0x900, card status 0x0
DIV_ROUND_UP_ULL helps to escape usage of __udivdi3() from libgcc and so code gets compiled on all 32-bit platforms as opposed to usage of DIV_ROUND_UP when we may only compile stuff on a very few arches.
Lets cast this multiply to u64 type which prevents overflow.
Tested-by: Vineet Gupta Vineet.Gupta1@synopsys.com Reported-by: Vineet Gupta Vineet.Gupta1@synopsys.com # ARC STAR 9001306872 HSDK, sdio: board crashes when copying big files Fixes: 9d9491a7da2a ("mmc: dw_mmc: Fix the DTO timeout calculation") Fixes: 4c2357f57dd5 ("mmc: dw_mmc: Fix the CTO timeout calculation")
Signed-off-by: Evgeniy Didin Evgeniy.Didin@synopsys.com
CC: Alexey Brodkin abrodkin@synopsys.com CC: Eugeniy Paltsev paltsev@synopsys.com CC: Douglas Anderson dianders@chromium.org CC: Ulf Hansson ulf.hansson@linaro.org CC: Andy Shevchenko andy.shevchenko@gmail.com CC: Jisheng Zhang Jisheng.Zhang@synaptics.com CC: Shawn Lin shawn.lin@rock-chips.com CC: Vineet Gupta Vineet.Gupta1@synopsys.com CC: linux-kernel@vger.kernel.org CC: linux-snps-arc@lists.infradead.org Cc: stable@vger.kernel.org
Changes since v3: -Switch DIV_ROUND_UP macro to DIV_ROUND_UP_ULL -Make one patch from two patches -Modify commit message
Changes sinve v2: -add fix for cto_ms
Changes since v1: -uint64_t switched to u64
drivers/mmc/host/dw_mmc.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
FYI that your messages keep ending up in my spam folder and I just see other people's replies. Not exactly sure why... Note also that your patch really doesn't have all the tags in the right places. All the Tags including the Signed-off-by and Cc are supposed to be squashed in one paragraph ...and I believe "CC" is canonically supposed to be "Cc". Presumably the maintainer can fix this up when applying, but please try to do better in the future. Speaking of which, you didn't include the dw_mmc maintainer (Jaehoon Chung) in your post? That seems not so great unless you know something that get_maintainers doesn't know about who will apply this patch.
$ ./scripts/get_maintainer.pl -f drivers/mmc/host/dw_mmc.c Jaehoon Chung jh80.chung@samsung.com (maintainer:SYNOPSYS DESIGNWARE MMC/SD/SDIO DRIVER)
As far as the actual patch, at first I thought maybe we could avoid the 64-bit math and just pre-divide bus_hz by MSEC_PER_SEC (just like used to happen before my change), but I think there's still a chance of overflow, right? Because, for instance:
drto_clks can be a full 24 bits drto_div can be effectively 9 bits
...we could do further tricks (further rounding up the result), but it seems like just doing the 64-bit math is fine too unless someone has any strong objections...
Reviewed-by: Douglas Anderson dianders@chromium.org
[+ Jaehoon]
On 2018/2/28 19:53, Evgeniy Didin wrote:
In commit 9d9491a7da2a ("mmc: dw_mmc: Fix the DTO timeout calculation") and commit 4c2357f57dd5 ("mmc: dw_mmc: Fix the CTO timeout calculation") have been made changes which cause multiply overflow for 32-bit systems. The broken timeout calculations leads to unexpected ETIMEDOUT errors and causes stacktrace splat (such as below) during normal data exchange with SD-card.
Reviewed-by: Shawn Lin shawn.lin@rock-chips.com
| Running : 4M-check-reassembly-tcp-cmykw2-rotatew2.out -v0 -w1 | - Info: Finished target initialization. | mmcblk0: error -110 transferring data, sector 320544, nr 2048, cmd response | 0x900, card status 0x0
DIV_ROUND_UP_ULL helps to escape usage of __udivdi3() from libgcc and so code gets compiled on all 32-bit platforms as opposed to usage of DIV_ROUND_UP when we may only compile stuff on a very few arches.
Lets cast this multiply to u64 type which prevents overflow.
Tested-by: Vineet Gupta Vineet.Gupta1@synopsys.com Reported-by: Vineet Gupta Vineet.Gupta1@synopsys.com # ARC STAR 9001306872 HSDK, sdio: board crashes when copying big files Fixes: 9d9491a7da2a ("mmc: dw_mmc: Fix the DTO timeout calculation") Fixes: 4c2357f57dd5 ("mmc: dw_mmc: Fix the CTO timeout calculation")
Signed-off-by: Evgeniy Didin Evgeniy.Didin@synopsys.com
CC: Alexey Brodkin abrodkin@synopsys.com CC: Eugeniy Paltsev paltsev@synopsys.com CC: Douglas Anderson dianders@chromium.org CC: Ulf Hansson ulf.hansson@linaro.org CC: Andy Shevchenko andy.shevchenko@gmail.com CC: Jisheng Zhang Jisheng.Zhang@synaptics.com CC: Shawn Lin shawn.lin@rock-chips.com CC: Vineet Gupta Vineet.Gupta1@synopsys.com CC: linux-kernel@vger.kernel.org CC: linux-snps-arc@lists.infradead.org Cc: stable@vger.kernel.org
Changes since v3: -Switch DIV_ROUND_UP macro to DIV_ROUND_UP_ULL -Make one patch from two patches -Modify commit message
Changes sinve v2: -add fix for cto_ms
Changes since v1: -uint64_t switched to u64
drivers/mmc/host/dw_mmc.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 0aa39975f33b..cba534d4c81b 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -409,7 +409,9 @@ static inline void dw_mci_set_cto(struct dw_mci *host) cto_div = (mci_readl(host, CLKDIV) & 0xff) * 2; if (cto_div == 0) cto_div = 1;
- cto_ms = DIV_ROUND_UP(MSEC_PER_SEC * cto_clks * cto_div, host->bus_hz);
- cto_ms = DIV_ROUND_UP_ULL((u64)MSEC_PER_SEC * cto_clks * cto_div,
host->bus_hz);/* add a bit spare time */ cto_ms += 10; @@ -1944,8 +1946,9 @@ static void dw_mci_set_drto(struct dw_mci *host) drto_div = (mci_readl(host, CLKDIV) & 0xff) * 2; if (drto_div == 0) drto_div = 1;
- drto_ms = DIV_ROUND_UP(MSEC_PER_SEC * drto_clks * drto_div,
host->bus_hz);
- drto_ms = DIV_ROUND_UP_ULL((u64)MSEC_PER_SEC * drto_clks * drto_div,
host->bus_hz);/* add a bit spare time */ drto_ms += 10;
On Wed, 28 Feb 2018 14:53:18 +0300 Evgeniy Didin wrote:
In commit 9d9491a7da2a ("mmc: dw_mmc: Fix the DTO timeout calculation") and commit 4c2357f57dd5 ("mmc: dw_mmc: Fix the CTO timeout calculation") have been made changes which cause multiply overflow for 32-bit systems. The broken timeout calculations leads to unexpected ETIMEDOUT errors and causes stacktrace splat (such as below) during normal data exchange with SD-card.
| Running : 4M-check-reassembly-tcp-cmykw2-rotatew2.out -v0 -w1 | - Info: Finished target initialization. | mmcblk0: error -110 transferring data, sector 320544, nr 2048, cmd response | 0x900, card status 0x0
DIV_ROUND_UP_ULL helps to escape usage of __udivdi3() from libgcc and so code gets compiled on all 32-bit platforms as opposed to usage of DIV_ROUND_UP when we may only compile stuff on a very few arches.
Lets cast this multiply to u64 type which prevents overflow.
Reviewed-by: Jisheng Zhang Jisheng.Zhang@synaptics.com
Tested-by: Vineet Gupta Vineet.Gupta1@synopsys.com Reported-by: Vineet Gupta Vineet.Gupta1@synopsys.com # ARC STAR 9001306872 HSDK, sdio: board crashes when copying big files Fixes: 9d9491a7da2a ("mmc: dw_mmc: Fix the DTO timeout calculation") Fixes: 4c2357f57dd5 ("mmc: dw_mmc: Fix the CTO timeout calculation")
Signed-off-by: Evgeniy Didin Evgeniy.Didin@synopsys.com
CC: Alexey Brodkin abrodkin@synopsys.com CC: Eugeniy Paltsev paltsev@synopsys.com CC: Douglas Anderson dianders@chromium.org CC: Ulf Hansson ulf.hansson@linaro.org CC: Andy Shevchenko andy.shevchenko@gmail.com CC: Jisheng Zhang Jisheng.Zhang@synaptics.com CC: Shawn Lin shawn.lin@rock-chips.com CC: Vineet Gupta Vineet.Gupta1@synopsys.com CC: linux-kernel@vger.kernel.org CC: linux-snps-arc@lists.infradead.org Cc: stable@vger.kernel.org
Changes since v3: -Switch DIV_ROUND_UP macro to DIV_ROUND_UP_ULL -Make one patch from two patches -Modify commit message
Changes sinve v2: -add fix for cto_ms
Changes since v1: -uint64_t switched to u64
drivers/mmc/host/dw_mmc.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 0aa39975f33b..cba534d4c81b 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -409,7 +409,9 @@ static inline void dw_mci_set_cto(struct dw_mci *host) cto_div = (mci_readl(host, CLKDIV) & 0xff) * 2; if (cto_div == 0) cto_div = 1;
- cto_ms = DIV_ROUND_UP(MSEC_PER_SEC * cto_clks * cto_div, host->bus_hz);
- cto_ms = DIV_ROUND_UP_ULL((u64)MSEC_PER_SEC * cto_clks * cto_div,
host->bus_hz);/* add a bit spare time */ cto_ms += 10; @@ -1944,8 +1946,9 @@ static void dw_mci_set_drto(struct dw_mci *host) drto_div = (mci_readl(host, CLKDIV) & 0xff) * 2; if (drto_div == 0) drto_div = 1;
- drto_ms = DIV_ROUND_UP(MSEC_PER_SEC * drto_clks * drto_div,
host->bus_hz);
- drto_ms = DIV_ROUND_UP_ULL((u64)MSEC_PER_SEC * drto_clks * drto_div,
host->bus_hz);/* add a bit spare time */ drto_ms += 10;
On 03/01/2018 02:57 PM, Jisheng Zhang wrote:
On Wed, 28 Feb 2018 14:53:18 +0300 Evgeniy Didin wrote:
In commit 9d9491a7da2a ("mmc: dw_mmc: Fix the DTO timeout calculation") and commit 4c2357f57dd5 ("mmc: dw_mmc: Fix the CTO timeout calculation") have been made changes which cause multiply overflow for 32-bit systems. The broken timeout calculations leads to unexpected ETIMEDOUT errors and causes stacktrace splat (such as below) during normal data exchange with SD-card.
| Running : 4M-check-reassembly-tcp-cmykw2-rotatew2.out -v0 -w1 | - Info: Finished target initialization. | mmcblk0: error -110 transferring data, sector 320544, nr 2048, cmd response | 0x900, card status 0x0
DIV_ROUND_UP_ULL helps to escape usage of __udivdi3() from libgcc and so code gets compiled on all 32-bit platforms as opposed to usage of DIV_ROUND_UP when we may only compile stuff on a very few arches.
Lets cast this multiply to u64 type which prevents overflow.
Reviewed-by: Jisheng Zhang Jisheng.Zhang@synaptics.com
Acked-by: Jaehoon Chung jh80.chung@samsung.com
Best Regards, Jaehoon Chung
Tested-by: Vineet Gupta Vineet.Gupta1@synopsys.com Reported-by: Vineet Gupta Vineet.Gupta1@synopsys.com # ARC STAR 9001306872 HSDK, sdio: board crashes when copying big files Fixes: 9d9491a7da2a ("mmc: dw_mmc: Fix the DTO timeout calculation") Fixes: 4c2357f57dd5 ("mmc: dw_mmc: Fix the CTO timeout calculation")
Signed-off-by: Evgeniy Didin Evgeniy.Didin@synopsys.com
CC: Alexey Brodkin abrodkin@synopsys.com CC: Eugeniy Paltsev paltsev@synopsys.com CC: Douglas Anderson dianders@chromium.org CC: Ulf Hansson ulf.hansson@linaro.org CC: Andy Shevchenko andy.shevchenko@gmail.com CC: Jisheng Zhang Jisheng.Zhang@synaptics.com CC: Shawn Lin shawn.lin@rock-chips.com CC: Vineet Gupta Vineet.Gupta1@synopsys.com CC: linux-kernel@vger.kernel.org CC: linux-snps-arc@lists.infradead.org Cc: stable@vger.kernel.org
Changes since v3: -Switch DIV_ROUND_UP macro to DIV_ROUND_UP_ULL -Make one patch from two patches -Modify commit message
Changes sinve v2: -add fix for cto_ms
Changes since v1: -uint64_t switched to u64
drivers/mmc/host/dw_mmc.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 0aa39975f33b..cba534d4c81b 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -409,7 +409,9 @@ static inline void dw_mci_set_cto(struct dw_mci *host) cto_div = (mci_readl(host, CLKDIV) & 0xff) * 2; if (cto_div == 0) cto_div = 1;
- cto_ms = DIV_ROUND_UP(MSEC_PER_SEC * cto_clks * cto_div, host->bus_hz);
- cto_ms = DIV_ROUND_UP_ULL((u64)MSEC_PER_SEC * cto_clks * cto_div,
host->bus_hz);/* add a bit spare time */ cto_ms += 10; @@ -1944,8 +1946,9 @@ static void dw_mci_set_drto(struct dw_mci *host) drto_div = (mci_readl(host, CLKDIV) & 0xff) * 2; if (drto_div == 0) drto_div = 1;
- drto_ms = DIV_ROUND_UP(MSEC_PER_SEC * drto_clks * drto_div,
host->bus_hz);
- drto_ms = DIV_ROUND_UP_ULL((u64)MSEC_PER_SEC * drto_clks * drto_div,
host->bus_hz);/* add a bit spare time */ drto_ms += 10;
On 28 February 2018 at 12:53, Evgeniy Didin Evgeniy.Didin@synopsys.com wrote:
In commit 9d9491a7da2a ("mmc: dw_mmc: Fix the DTO timeout calculation") and commit 4c2357f57dd5 ("mmc: dw_mmc: Fix the CTO timeout calculation") have been made changes which cause multiply overflow for 32-bit systems. The broken timeout calculations leads to unexpected ETIMEDOUT errors and causes stacktrace splat (such as below) during normal data exchange with SD-card.
| Running : 4M-check-reassembly-tcp-cmykw2-rotatew2.out -v0 -w1 | - Info: Finished target initialization. | mmcblk0: error -110 transferring data, sector 320544, nr 2048, cmd response | 0x900, card status 0x0
DIV_ROUND_UP_ULL helps to escape usage of __udivdi3() from libgcc and so code gets compiled on all 32-bit platforms as opposed to usage of DIV_ROUND_UP when we may only compile stuff on a very few arches.
Lets cast this multiply to u64 type which prevents overflow.
Tested-by: Vineet Gupta Vineet.Gupta1@synopsys.com Reported-by: Vineet Gupta Vineet.Gupta1@synopsys.com # ARC STAR 9001306872 HSDK, sdio: board crashes when copying big files Fixes: 9d9491a7da2a ("mmc: dw_mmc: Fix the DTO timeout calculation") Fixes: 4c2357f57dd5 ("mmc: dw_mmc: Fix the CTO timeout calculation")
Signed-off-by: Evgeniy Didin Evgeniy.Didin@synopsys.com
CC: Alexey Brodkin abrodkin@synopsys.com CC: Eugeniy Paltsev paltsev@synopsys.com CC: Douglas Anderson dianders@chromium.org CC: Ulf Hansson ulf.hansson@linaro.org CC: Andy Shevchenko andy.shevchenko@gmail.com CC: Jisheng Zhang Jisheng.Zhang@synaptics.com CC: Shawn Lin shawn.lin@rock-chips.com CC: Vineet Gupta Vineet.Gupta1@synopsys.com CC: linux-kernel@vger.kernel.org CC: linux-snps-arc@lists.infradead.org Cc: stable@vger.kernel.org
Thanks, applied for fixes! I took the liberty to remove this cc-list and did some additional minor cleanups of the change log.
Kind regards Uffe
Changes since v3: -Switch DIV_ROUND_UP macro to DIV_ROUND_UP_ULL -Make one patch from two patches -Modify commit message
Changes sinve v2: -add fix for cto_ms
Changes since v1: -uint64_t switched to u64
drivers/mmc/host/dw_mmc.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 0aa39975f33b..cba534d4c81b 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -409,7 +409,9 @@ static inline void dw_mci_set_cto(struct dw_mci *host) cto_div = (mci_readl(host, CLKDIV) & 0xff) * 2; if (cto_div == 0) cto_div = 1;
cto_ms = DIV_ROUND_UP(MSEC_PER_SEC * cto_clks * cto_div, host->bus_hz);
cto_ms = DIV_ROUND_UP_ULL((u64)MSEC_PER_SEC * cto_clks * cto_div,host->bus_hz); /* add a bit spare time */ cto_ms += 10;@@ -1944,8 +1946,9 @@ static void dw_mci_set_drto(struct dw_mci *host) drto_div = (mci_readl(host, CLKDIV) & 0xff) * 2; if (drto_div == 0) drto_div = 1;
drto_ms = DIV_ROUND_UP(MSEC_PER_SEC * drto_clks * drto_div,host->bus_hz);
drto_ms = DIV_ROUND_UP_ULL((u64)MSEC_PER_SEC * drto_clks * drto_div,host->bus_hz); /* add a bit spare time */ drto_ms += 10;-- 2.11.0
linux-stable-mirror@lists.linaro.org
-
Andy Shevchenko -
Doug Anderson -
Evgeniy Didin -
Jaehoon Chung -
Jisheng Zhang -
Shawn Lin -
Ulf Hansson