From: Paolo Bonzini pbonzini@redhat.com

commit 3d5e7a28b1ea2d603dea478e58e37ce75b9597ab upstream.

This is a new warning in clang top-of-tree (will be clang 14):

In file included from arch/x86/kvm/mmu/mmu.c:27: arch/x86/kvm/mmu/spte.h:318:9: error: use of bitwise '|' with boolean operands [-Werror,-Wbitwise-instead-of-logical] return __is_bad_mt_xwr(rsvd_check, spte) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ || arch/x86/kvm/mmu/spte.h:318:9: note: cast one or both operands to int to silence this warning

The code is fine, but change it anyway to shut up this clever clogs of a compiler.

Reported-by: torvic9@mailbox.org Signed-off-by: Paolo Bonzini pbonzini@redhat.com Cc: Nathan Chancellor nathan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/x86/kvm/mmu/spte.h | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-)

--- a/arch/x86/kvm/mmu/spte.h +++ b/arch/x86/kvm/mmu/spte.h @@ -310,12 +310,7 @@ static inline bool __is_bad_mt_xwr(struc static __always_inline bool is_rsvd_spte(struct rsvd_bits_validate *rsvd_check, u64 spte, int level) { - /* - * Use a bitwise-OR instead of a logical-OR to aggregate the reserved - * bits and EPT's invalid memtype/XWR checks to avoid an extra Jcc - * (this is extremely unlikely to be short-circuited as true). - */ - return __is_bad_mt_xwr(rsvd_check, spte) | + return __is_bad_mt_xwr(rsvd_check, spte) || __is_rsvd_bits_set(rsvd_check, spte, level); }

From: Neal Liu neal_liu@aspeedtech.com

commit 7f2d73788d9067fd4f677ac5f60ffd25945af7af upstream.

For Aspeed, HCHalted status depends on not only Run/Stop but also ASS/PSS status. Handshake CMD_RUN on startup instead.

Tested-by: Tao Ren rentao.bupt@gmail.com Reviewed-by: Tao Ren rentao.bupt@gmail.com Acked-by: Alan Stern stern@rowland.harvard.edu Signed-off-by: Neal Liu neal_liu@aspeedtech.com Link: https://lore.kernel.org/r/20210910073619.26095-1-neal_liu@aspeedtech.com Cc: Joel Stanley joel@jms.id.au Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/host/ehci-hcd.c | 11 ++++++++++- drivers/usb/host/ehci-platform.c | 6 ++++++ drivers/usb/host/ehci.h | 1 + 3 files changed, 17 insertions(+), 1 deletion(-)

--- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -635,7 +635,16 @@ static int ehci_run (struct usb_hcd *hcd /* Wait until HC become operational */ ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */ msleep(5); - rc = ehci_handshake(ehci, &ehci->regs->status, STS_HALT, 0, 100 * 1000); + + /* For Aspeed, STS_HALT also depends on ASS/PSS status. + * Check CMD_RUN instead. + */ + if (ehci->is_aspeed) + rc = ehci_handshake(ehci, &ehci->regs->command, CMD_RUN, + 1, 100 * 1000); + else + rc = ehci_handshake(ehci, &ehci->regs->status, STS_HALT, + 0, 100 * 1000);

up_write(&ehci_cf_port_reset_rwsem);

--- a/drivers/usb/host/ehci-platform.c +++ b/drivers/usb/host/ehci-platform.c @@ -297,6 +297,12 @@ static int ehci_platform_probe(struct pl "has-transaction-translator")) hcd->has_tt = 1;

+ if (of_device_is_compatible(dev->dev.of_node, + "aspeed,ast2500-ehci") || + of_device_is_compatible(dev->dev.of_node, + "aspeed,ast2600-ehci")) + ehci->is_aspeed = 1; + if (soc_device_match(quirk_poll_match)) priv->quirk_poll = true;

--- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -219,6 +219,7 @@ struct ehci_hcd { /* one per controlle unsigned need_oc_pp_cycle:1; /* MPC834X port power */ unsigned imx28_write_fix:1; /* For Freescale i.MX28 */ unsigned spurious_oc:1; + unsigned is_aspeed:1;

/* required for usb32 quirk */ #define OHCI_CTRL_HCFS (3 << 6)

From: Viraj Shah viraj.shah@linutronix.de

commit 21b5fcdccb32ff09b6b63d4a83c037150665a83f upstream.

musb_gadget_queue() adds the passed request to musb_ep::req_list. If the endpoint is idle and it is the first request then it invokes musb_queue_resume_work(). If the function returns an error then the error is passed to the caller without any clean-up and the request remains enqueued on the list. If the caller enqueues the request again then the list corrupts.

Remove the request from the list on error.

Fixes: ea2f35c01d5ea ("usb: musb: Fix sleeping function called from invalid context for hdrc glue") Cc: stable stable@vger.kernel.org Signed-off-by: Viraj Shah viraj.shah@linutronix.de Link: https://lore.kernel.org/r/20211021093644.4734-1-viraj.shah@linutronix.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/musb/musb_gadget.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -1247,9 +1247,11 @@ static int musb_gadget_queue(struct usb_ status = musb_queue_resume_work(musb, musb_ep_restart_resume_work, request); - if (status < 0) + if (status < 0) { dev_err(musb->controller, "%s resume work: %i\n", __func__, status); + list_del(&request->list); + } }

unlock:

From: Kees Cook keescook@chromium.org

commit 54354c6a9f7fd5572d2b9ec108117c4f376d4d23 upstream.

This reverts commit 152c432b128cb043fc107e8f211195fe94b2159c.

When a kernel address couldn't be symbolized for /proc/$pid/wchan, it would leak the raw value, a potential information exposure. This is a regression compared to the safer pre-v5.12 behavior.

Reported-by: kernel test robot oliver.sang@intel.com Reported-by: Vito Caputo vcaputo@pengaru.com Reported-by: Jann Horn jannh@google.com Signed-off-by: Kees Cook keescook@chromium.org Signed-off-by: Peter Zijlstra (Intel) peterz@infradead.org Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20211008111626.090829198@infradead.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/proc/base.c | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-)

--- a/fs/proc/base.c +++ b/fs/proc/base.c @@ -67,6 +67,7 @@ #include <linux/mm.h> #include <linux/swap.h> #include <linux/rcupdate.h> +#include <linux/kallsyms.h> #include <linux/stacktrace.h> #include <linux/resource.h> #include <linux/module.h> @@ -386,17 +387,19 @@ static int proc_pid_wchan(struct seq_fil struct pid *pid, struct task_struct *task) { unsigned long wchan; + char symname[KSYM_NAME_LEN];

- if (ptrace_may_access(task, PTRACE_MODE_READ_FSCREDS)) - wchan = get_wchan(task); - else - wchan = 0; - - if (wchan) - seq_printf(m, "%ps", (void *) wchan); - else - seq_putc(m, '0'); + if (!ptrace_may_access(task, PTRACE_MODE_READ_FSCREDS)) + goto print0;

+ wchan = get_wchan(task); + if (wchan && !lookup_symbol_name(wchan, symname)) { + seq_puts(m, symname); + return 0; + } + +print0: + seq_putc(m, '0'); return 0; } #endif /* CONFIG_KALLSYMS */

From: Todd Kjos tkjos@google.com

commit 52f88693378a58094c538662ba652aff0253c4fe upstream.

Since binder was integrated with selinux, it has passed 'struct task_struct' associated with the binder_proc to represent the source and target of transactions. The conversion of task to SID was then done in the hook implementations. It turns out that there are race conditions which can result in an incorrect security context being used.

Fix by using the 'struct cred' saved during binder_open and pass it to the selinux subsystem.

Cc: stable@vger.kernel.org # 5.14 (need backport for earlier stables) Fixes: 79af73079d75 ("Add security hooks to binder and implement the hooks for SELinux.") Suggested-by: Jann Horn jannh@google.com Signed-off-by: Todd Kjos tkjos@google.com Acked-by: Casey Schaufler casey@schaufler-ca.com Signed-off-by: Paul Moore paul@paul-moore.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/android/binder.c | 12 +++++----- include/linux/lsm_hook_defs.h | 14 ++++++------ include/linux/lsm_hooks.h | 14 ++++++------ include/linux/security.h | 28 ++++++++++++------------ security/security.c | 14 ++++++------ security/selinux/hooks.c | 48 +++++++++++------------------------------- 6 files changed, 54 insertions(+), 76 deletions(-)

--- a/drivers/android/binder.c +++ b/drivers/android/binder.c @@ -2056,7 +2056,7 @@ static int binder_translate_binder(struc ret = -EINVAL; goto done; } - if (security_binder_transfer_binder(proc->tsk, target_proc->tsk)) { + if (security_binder_transfer_binder(proc->cred, target_proc->cred)) { ret = -EPERM; goto done; } @@ -2102,7 +2102,7 @@ static int binder_translate_handle(struc proc->pid, thread->pid, fp->handle); return -EINVAL; } - if (security_binder_transfer_binder(proc->tsk, target_proc->tsk)) { + if (security_binder_transfer_binder(proc->cred, target_proc->cred)) { ret = -EPERM; goto done; } @@ -2190,7 +2190,7 @@ static int binder_translate_fd(u32 fd, b ret = -EBADF; goto err_fget; } - ret = security_binder_transfer_file(proc->tsk, target_proc->tsk, file); + ret = security_binder_transfer_file(proc->cred, target_proc->cred, file); if (ret < 0) { ret = -EPERM; goto err_security; @@ -2595,8 +2595,8 @@ static void binder_transaction(struct bi return_error_line = __LINE__; goto err_invalid_target_handle; } - if (security_binder_transaction(proc->tsk, - target_proc->tsk) < 0) { + if (security_binder_transaction(proc->cred, + target_proc->cred) < 0) { return_error = BR_FAILED_REPLY; return_error_param = -EPERM; return_error_line = __LINE__; @@ -4565,7 +4565,7 @@ static int binder_ioctl_set_ctx_mgr(stru ret = -EBUSY; goto out; } - ret = security_binder_set_context_mgr(proc->tsk); + ret = security_binder_set_context_mgr(proc->cred); if (ret < 0) goto out; if (uid_valid(context->binder_context_mgr_uid)) { --- a/include/linux/lsm_hook_defs.h +++ b/include/linux/lsm_hook_defs.h @@ -26,13 +26,13 @@ * #undef LSM_HOOK * }; */ -LSM_HOOK(int, 0, binder_set_context_mgr, struct task_struct *mgr) -LSM_HOOK(int, 0, binder_transaction, struct task_struct *from, - struct task_struct *to) -LSM_HOOK(int, 0, binder_transfer_binder, struct task_struct *from, - struct task_struct *to) -LSM_HOOK(int, 0, binder_transfer_file, struct task_struct *from, - struct task_struct *to, struct file *file) +LSM_HOOK(int, 0, binder_set_context_mgr, const struct cred *mgr) +LSM_HOOK(int, 0, binder_transaction, const struct cred *from, + const struct cred *to) +LSM_HOOK(int, 0, binder_transfer_binder, const struct cred *from, + const struct cred *to) +LSM_HOOK(int, 0, binder_transfer_file, const struct cred *from, + const struct cred *to, struct file *file) LSM_HOOK(int, 0, ptrace_access_check, struct task_struct *child, unsigned int mode) LSM_HOOK(int, 0, ptrace_traceme, struct task_struct *parent) --- a/include/linux/lsm_hooks.h +++ b/include/linux/lsm_hooks.h @@ -1313,22 +1313,22 @@ * * @binder_set_context_mgr: * Check whether @mgr is allowed to be the binder context manager. - * @mgr contains the task_struct for the task being registered. + * @mgr contains the struct cred for the current binder process. * Return 0 if permission is granted. * @binder_transaction: * Check whether @from is allowed to invoke a binder transaction call * to @to. - * @from contains the task_struct for the sending task. - * @to contains the task_struct for the receiving task. + * @from contains the struct cred for the sending process. + * @to contains the struct cred for the receiving process. * @binder_transfer_binder: * Check whether @from is allowed to transfer a binder reference to @to. - * @from contains the task_struct for the sending task. - * @to contains the task_struct for the receiving task. + * @from contains the struct cred for the sending process. + * @to contains the struct cred for the receiving process. * @binder_transfer_file: * Check whether @from is allowed to transfer @file to @to. - * @from contains the task_struct for the sending task. + * @from contains the struct cred for the sending process. * @file contains the struct file being transferred. - * @to contains the task_struct for the receiving task. + * @to contains the struct cred for the receiving process. * * @ptrace_access_check: * Check permission before allowing the current process to trace the --- a/include/linux/security.h +++ b/include/linux/security.h @@ -258,13 +258,13 @@ extern int security_init(void); extern int early_security_init(void);

/* Security operations */ -int security_binder_set_context_mgr(struct task_struct *mgr); -int security_binder_transaction(struct task_struct *from, - struct task_struct *to); -int security_binder_transfer_binder(struct task_struct *from, - struct task_struct *to); -int security_binder_transfer_file(struct task_struct *from, - struct task_struct *to, struct file *file); +int security_binder_set_context_mgr(const struct cred *mgr); +int security_binder_transaction(const struct cred *from, + const struct cred *to); +int security_binder_transfer_binder(const struct cred *from, + const struct cred *to); +int security_binder_transfer_file(const struct cred *from, + const struct cred *to, struct file *file); int security_ptrace_access_check(struct task_struct *child, unsigned int mode); int security_ptrace_traceme(struct task_struct *parent); int security_capget(struct task_struct *target, @@ -508,25 +508,25 @@ static inline int early_security_init(vo return 0; }

-static inline int security_binder_set_context_mgr(struct task_struct *mgr) +static inline int security_binder_set_context_mgr(const struct cred *mgr) { return 0; }

-static inline int security_binder_transaction(struct task_struct *from, - struct task_struct *to) +static inline int security_binder_transaction(const struct cred *from, + const struct cred *to) { return 0; }

-static inline int security_binder_transfer_binder(struct task_struct *from, - struct task_struct *to) +static inline int security_binder_transfer_binder(const struct cred *from, + const struct cred *to) { return 0; }

-static inline int security_binder_transfer_file(struct task_struct *from, - struct task_struct *to, +static inline int security_binder_transfer_file(const struct cred *from, + const struct cred *to, struct file *file) { return 0; --- a/security/security.c +++ b/security/security.c @@ -747,25 +747,25 @@ static int lsm_superblock_alloc(struct s

/* Security operations */

-int security_binder_set_context_mgr(struct task_struct *mgr) +int security_binder_set_context_mgr(const struct cred *mgr) { return call_int_hook(binder_set_context_mgr, 0, mgr); }

-int security_binder_transaction(struct task_struct *from, - struct task_struct *to) +int security_binder_transaction(const struct cred *from, + const struct cred *to) { return call_int_hook(binder_transaction, 0, from, to); }

-int security_binder_transfer_binder(struct task_struct *from, - struct task_struct *to) +int security_binder_transfer_binder(const struct cred *from, + const struct cred *to) { return call_int_hook(binder_transfer_binder, 0, from, to); }

-int security_binder_transfer_file(struct task_struct *from, - struct task_struct *to, struct file *file) +int security_binder_transfer_file(const struct cred *from, + const struct cred *to, struct file *file) { return call_int_hook(binder_transfer_file, 0, from, to, file); } --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -255,29 +255,6 @@ static inline u32 task_sid_obj(const str return sid; }

-/* - * get the security ID of a task for use with binder - */ -static inline u32 task_sid_binder(const struct task_struct *task) -{ - /* - * In many case where this function is used we should be using the - * task's subjective SID, but we can't reliably access the subjective - * creds of a task other than our own so we must use the objective - * creds/SID, which are safe to access. The downside is that if a task - * is temporarily overriding it's creds it will not be reflected here; - * however, it isn't clear that binder would handle that case well - * anyway. - * - * If this ever changes and we can safely reference the subjective - * creds/SID of another task, this function will make it easier to - * identify the various places where we make use of the task SIDs in - * the binder code. It is also likely that we will need to adjust - * the main drivers/android binder code as well. - */ - return task_sid_obj(task); -} - static int inode_doinit_with_dentry(struct inode *inode, struct dentry *opt_dentry);

/* @@ -2066,18 +2043,19 @@ static inline u32 open_file_to_av(struct

/* Hook functions begin here. */

-static int selinux_binder_set_context_mgr(struct task_struct *mgr) +static int selinux_binder_set_context_mgr(const struct cred *mgr) { return avc_has_perm(&selinux_state, - current_sid(), task_sid_binder(mgr), SECCLASS_BINDER, + current_sid(), cred_sid(mgr), SECCLASS_BINDER, BINDER__SET_CONTEXT_MGR, NULL); }

-static int selinux_binder_transaction(struct task_struct *from, - struct task_struct *to) +static int selinux_binder_transaction(const struct cred *from, + const struct cred *to) { u32 mysid = current_sid(); - u32 fromsid = task_sid_binder(from); + u32 fromsid = cred_sid(from); + u32 tosid = cred_sid(to); int rc;

if (mysid != fromsid) { @@ -2088,24 +2066,24 @@ static int selinux_binder_transaction(st return rc; }

- return avc_has_perm(&selinux_state, fromsid, task_sid_binder(to), + return avc_has_perm(&selinux_state, fromsid, tosid, SECCLASS_BINDER, BINDER__CALL, NULL); }

-static int selinux_binder_transfer_binder(struct task_struct *from, - struct task_struct *to) +static int selinux_binder_transfer_binder(const struct cred *from, + const struct cred *to) { return avc_has_perm(&selinux_state, - task_sid_binder(from), task_sid_binder(to), + cred_sid(from), cred_sid(to), SECCLASS_BINDER, BINDER__TRANSFER, NULL); }

-static int selinux_binder_transfer_file(struct task_struct *from, - struct task_struct *to, +static int selinux_binder_transfer_file(const struct cred *from, + const struct cred *to, struct file *file) { - u32 sid = task_sid_binder(to); + u32 sid = cred_sid(to); struct file_security_struct *fsec = selinux_file(file); struct dentry *dentry = file->f_path.dentry; struct inode_security_struct *isec;

From: Todd Kjos tkjos@google.com

commit 32e9f56a96d8d0f23cb2aeb2a3cd18d40393e787 upstream.

When freeing txn buffers, binder_transaction_buffer_release() attempts to detect whether the current context is the target by comparing current->group_leader to proc->tsk. This is an unreliable test. Instead explicitly pass an 'is_failure' boolean.

Detecting the sender was being used as a way to tell if the transaction failed to be sent. When cleaning up after failing to send a transaction, there is no need to close the fds associated with a BINDER_TYPE_FDA object. Now 'is_failure' can be used to accurately detect this case.

Fixes: 44d8047f1d87 ("binder: use standard functions to allocate fds") Cc: stable stable@vger.kernel.org Acked-by: Christian Brauner christian.brauner@ubuntu.com Signed-off-by: Todd Kjos tkjos@google.com Link: https://lore.kernel.org/r/20211015233811.3532235-1-tkjos@google.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/android/binder.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-)

--- a/drivers/android/binder.c +++ b/drivers/android/binder.c @@ -1870,7 +1870,7 @@ static void binder_transaction_buffer_re binder_dec_node(buffer->target_node, 1, 0);

off_start_offset = ALIGN(buffer->data_size, sizeof(void *)); - off_end_offset = is_failure ? failed_at : + off_end_offset = is_failure && failed_at ? failed_at : off_start_offset + buffer->offsets_size; for (buffer_offset = off_start_offset; buffer_offset < off_end_offset; buffer_offset += sizeof(binder_size_t)) { @@ -1956,9 +1956,8 @@ static void binder_transaction_buffer_re binder_size_t fd_buf_size; binder_size_t num_valid;

- if (proc->tsk != current->group_leader) { + if (is_failure) { /* - * Nothing to do if running in sender context * The fd fixups have not been applied so no * fds need to be closed. */ @@ -3176,6 +3175,7 @@ err_invalid_target_handle: * binder_free_buf() - free the specified buffer * @proc: binder proc that owns buffer * @buffer: buffer to be freed + * @is_failure: failed to send transaction * * If buffer for an async transaction, enqueue the next async * transaction from the node. @@ -3185,7 +3185,7 @@ err_invalid_target_handle: static void binder_free_buf(struct binder_proc *proc, struct binder_thread *thread, - struct binder_buffer *buffer) + struct binder_buffer *buffer, bool is_failure) { binder_inner_proc_lock(proc); if (buffer->transaction) { @@ -3213,7 +3213,7 @@ binder_free_buf(struct binder_proc *proc binder_node_inner_unlock(buf_node); } trace_binder_transaction_buffer_release(buffer); - binder_transaction_buffer_release(proc, thread, buffer, 0, false); + binder_transaction_buffer_release(proc, thread, buffer, 0, is_failure); binder_alloc_free_buf(&proc->alloc, buffer); }

@@ -3415,7 +3415,7 @@ static int binder_thread_write(struct bi proc->pid, thread->pid, (u64)data_ptr, buffer->debug_id, buffer->transaction ? "active" : "finished"); - binder_free_buf(proc, thread, buffer); + binder_free_buf(proc, thread, buffer, false); break; }

@@ -4108,7 +4108,7 @@ retry: buffer->transaction = NULL; binder_cleanup_transaction(t, "fd fixups failed", BR_FAILED_REPLY); - binder_free_buf(proc, thread, buffer); + binder_free_buf(proc, thread, buffer, true); binder_debug(BINDER_DEBUG_FAILED_TRANSACTION, "%d:%d %stransaction %d fd fixups failed %d/%d, line %d\n", proc->pid, thread->pid,

From: Marco Elver elver@google.com

commit 4f612ed3f748962cbef1316ff3d323e2b9055b6e upstream.

We have observed that on very large machines with newer CPUs, the static key/branch switching delay is on the order of milliseconds. This is due to the required broadcast IPIs, which simply does not scale well to hundreds of CPUs (cores). If done too frequently, this can adversely affect tail latencies of various workloads.

One workaround is to increase the sample interval to several seconds, while decreasing sampled allocation coverage, but the problem still exists and could still increase tail latencies.

As already noted in the Kconfig help text, there are trade-offs: at lower sample intervals the dynamic branch results in better performance; however, at very large sample intervals, the static keys mode can result in better performance -- careful benchmarking is recommended.

Our initial benchmarking showed that with large enough sample intervals and workloads stressing the allocator, the static keys mode was slightly better. Evaluating and observing the possible system-wide side-effects of the static-key-switching induced broadcast IPIs, however, was a blind spot (in particular on large machines with 100s of cores).

Therefore, a major downside of the static keys mode is, unfortunately, that it is hard to predict performance on new system architectures and topologies, but also making conclusions about performance of new workloads based on a limited set of benchmarks.

Most distributions will simply select the defaults, while targeting a large variety of different workloads and system architectures. As such, the better default is CONFIG_KFENCE_STATIC_KEYS=n, and re-enabling it is only recommended after careful evaluation.

For reference, on x86-64 the condition in kfence_alloc() generates exactly 2 instructions in the kmem_cache_alloc() fast-path:

| ... | cmpl $0x0,0x1a8021c(%rip) # ffffffff82d560d0 <kfence_allocation_gate> | je ffffffff812d6003 <kmem_cache_alloc+0x243> | ...

which, given kfence_allocation_gate is infrequently modified, should be well predicted by most CPUs.

Link: https://lkml.kernel.org/r/20211019102524.2807208-2-elver@google.com Signed-off-by: Marco Elver elver@google.com Cc: Alexander Potapenko glider@google.com Cc: Dmitry Vyukov dvyukov@google.com Cc: Jann Horn jannh@google.com Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- Documentation/dev-tools/kfence.rst | 12 ++++++++---- lib/Kconfig.kfence | 26 +++++++++++++++----------- 2 files changed, 23 insertions(+), 15 deletions(-)

--- a/Documentation/dev-tools/kfence.rst +++ b/Documentation/dev-tools/kfence.rst @@ -231,10 +231,14 @@ Guarded allocations are set up based on of the sample interval, the next allocation through the main allocator (SLAB or SLUB) returns a guarded allocation from the KFENCE object pool (allocation sizes up to PAGE_SIZE are supported). At this point, the timer is reset, and -the next allocation is set up after the expiration of the interval. To "gate" a -KFENCE allocation through the main allocator's fast-path without overhead, -KFENCE relies on static branches via the static keys infrastructure. The static -branch is toggled to redirect the allocation to KFENCE. +the next allocation is set up after the expiration of the interval. + +When using ``CONFIG_KFENCE_STATIC_KEYS=y``, KFENCE allocations are "gated" +through the main allocator's fast-path by relying on static branches via the +static keys infrastructure. The static branch is toggled to redirect the +allocation to KFENCE. Depending on sample interval, target workloads, and +system architecture, this may perform better than the simple dynamic branch. +Careful benchmarking is recommended.

KFENCE objects each reside on a dedicated page, at either the left or right page boundaries selected at random. The pages to the left and right of the --- a/lib/Kconfig.kfence +++ b/lib/Kconfig.kfence @@ -25,17 +25,6 @@ menuconfig KFENCE

if KFENCE

-config KFENCE_STATIC_KEYS - bool "Use static keys to set up allocations" - default y - depends on JUMP_LABEL # To ensure performance, require jump labels - help - Use static keys (static branches) to set up KFENCE allocations. Using - static keys is normally recommended, because it avoids a dynamic - branch in the allocator's fast path. However, with very low sample - intervals, or on systems that do not support jump labels, a dynamic - branch may still be an acceptable performance trade-off. - config KFENCE_SAMPLE_INTERVAL int "Default sample interval in milliseconds" default 100 @@ -56,6 +45,21 @@ config KFENCE_NUM_OBJECTS pages are required; with one containing the object and two adjacent ones used as guard pages.

+config KFENCE_STATIC_KEYS + bool "Use static keys to set up allocations" if EXPERT + depends on JUMP_LABEL + help + Use static keys (static branches) to set up KFENCE allocations. This + option is only recommended when using very large sample intervals, or + performance has carefully been evaluated with this option. + + Using static keys comes with trade-offs that need to be carefully + evaluated given target workloads and system architectures. Notably, + enabling and disabling static keys invoke IPI broadcasts, the latency + and impact of which is much harder to predict than a dynamic branch. + + Say N if you are unsure. + config KFENCE_STRESS_TEST_FAULTS int "Stress testing of fault handling and error reporting" if EXPERT default 0

From: Pavel Skripkin paskripkin@gmail.com

commit c052cc1a069c3e575619cf64ec427eb41176ca70 upstream.

Syzbot reported use-after-free in rtl8712_dl_fw(). The problem was in race condition between r871xu_dev_remove() ->ndo_open() callback.

It's easy to see from crash log, that driver accesses released firmware in ->ndo_open() callback. It may happen, since driver was releasing firmware _before_ unregistering netdev. Fix it by moving unregister_netdev() before cleaning up resources.

Call Trace: ... rtl871x_open_fw drivers/staging/rtl8712/hal_init.c:83 [inline] rtl8712_dl_fw+0xd95/0xe10 drivers/staging/rtl8712/hal_init.c:170 rtl8712_hal_init drivers/staging/rtl8712/hal_init.c:330 [inline] rtl871x_hal_init+0xae/0x180 drivers/staging/rtl8712/hal_init.c:394 netdev_open+0xe6/0x6c0 drivers/staging/rtl8712/os_intfs.c:380 __dev_open+0x2bc/0x4d0 net/core/dev.c:1484

Freed by task 1306: ... release_firmware+0x1b/0x30 drivers/base/firmware_loader/main.c:1053 r871xu_dev_remove+0xcc/0x2c0 drivers/staging/rtl8712/usb_intf.c:599 usb_unbind_interface+0x1d8/0x8d0 drivers/usb/core/driver.c:458

Fixes: 8c213fa59199 ("staging: r8712u: Use asynchronous firmware loading") Cc: stable stable@vger.kernel.org Reported-and-tested-by: syzbot+c55162be492189fb4f51@syzkaller.appspotmail.com Signed-off-by: Pavel Skripkin paskripkin@gmail.com Link: https://lore.kernel.org/r/20211019211718.26354-1-paskripkin@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/staging/rtl8712/usb_intf.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/staging/rtl8712/usb_intf.c +++ b/drivers/staging/rtl8712/usb_intf.c @@ -595,12 +595,12 @@ static void r871xu_dev_remove(struct usb

/* never exit with a firmware callback pending */ wait_for_completion(&padapter->rtl8712_fw_ready); + if (pnetdev->reg_state != NETREG_UNINITIALIZED) + unregister_netdev(pnetdev); /* will call netdev_close() */ usb_set_intfdata(pusb_intf, NULL); release_firmware(padapter->fw); if (drvpriv.drv_registered) padapter->surprise_removed = true; - if (pnetdev->reg_state != NETREG_UNINITIALIZED) - unregister_netdev(pnetdev); /* will call netdev_close() */ r8712_flush_rwctrl_works(padapter); r8712_flush_led_works(padapter); udelay(1);

From: Johan Hovold johan@kernel.org

commit 536de747bc48262225889a533db6650731ab25d3 upstream.

USB transfer buffers are typically mapped for DMA and must not be allocated on the stack or transfers will fail.

Allocate proper transfer buffers in the various command helpers and return an error on short transfers instead of acting on random stack data.

Note that this also fixes a stack info leak on systems where DMA is not used as 32 bytes are always sent to the device regardless of how short the command is.

Fixes: 63274cd7d38a ("Staging: comedi: add usb dt9812 driver") Cc: stable@vger.kernel.org # 2.6.29 Reviewed-by: Ian Abbott abbotti@mev.co.uk Signed-off-by: Johan Hovold johan@kernel.org Link: https://lore.kernel.org/r/20211027093529.30896-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/comedi/drivers/dt9812.c | 115 +++++++++++++++++++++++++++++----------- 1 file changed, 86 insertions(+), 29 deletions(-)

--- a/drivers/comedi/drivers/dt9812.c +++ b/drivers/comedi/drivers/dt9812.c @@ -32,6 +32,7 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/errno.h> +#include <linux/slab.h> #include <linux/uaccess.h>

#include "../comedi_usb.h" @@ -237,22 +238,42 @@ static int dt9812_read_info(struct comed { struct usb_device *usb = comedi_to_usb_dev(dev); struct dt9812_private *devpriv = dev->private; - struct dt9812_usb_cmd cmd; + struct dt9812_usb_cmd *cmd; + size_t tbuf_size; int count, ret; + void *tbuf;

- cmd.cmd = cpu_to_le32(DT9812_R_FLASH_DATA); - cmd.u.flash_data_info.address = + tbuf_size = max(sizeof(*cmd), buf_size); + + tbuf = kzalloc(tbuf_size, GFP_KERNEL); + if (!tbuf) + return -ENOMEM; + + cmd = tbuf; + + cmd->cmd = cpu_to_le32(DT9812_R_FLASH_DATA); + cmd->u.flash_data_info.address = cpu_to_le16(DT9812_DIAGS_BOARD_INFO_ADDR + offset); - cmd.u.flash_data_info.numbytes = cpu_to_le16(buf_size); + cmd->u.flash_data_info.numbytes = cpu_to_le16(buf_size);

/* DT9812 only responds to 32 byte writes!! */ ret = usb_bulk_msg(usb, usb_sndbulkpipe(usb, devpriv->cmd_wr.addr), - &cmd, 32, &count, DT9812_USB_TIMEOUT); + cmd, sizeof(*cmd), &count, DT9812_USB_TIMEOUT); if (ret) - return ret; + goto out; + + ret = usb_bulk_msg(usb, usb_rcvbulkpipe(usb, devpriv->cmd_rd.addr), + tbuf, buf_size, &count, DT9812_USB_TIMEOUT); + if (!ret) { + if (count == buf_size) + memcpy(buf, tbuf, buf_size); + else + ret = -EREMOTEIO; + } +out: + kfree(tbuf);

- return usb_bulk_msg(usb, usb_rcvbulkpipe(usb, devpriv->cmd_rd.addr), - buf, buf_size, &count, DT9812_USB_TIMEOUT); + return ret; }

static int dt9812_read_multiple_registers(struct comedi_device *dev, @@ -261,22 +282,42 @@ static int dt9812_read_multiple_register { struct usb_device *usb = comedi_to_usb_dev(dev); struct dt9812_private *devpriv = dev->private; - struct dt9812_usb_cmd cmd; + struct dt9812_usb_cmd *cmd; int i, count, ret; + size_t buf_size; + void *buf; + + buf_size = max_t(size_t, sizeof(*cmd), reg_count); + + buf = kzalloc(buf_size, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + cmd = buf;

- cmd.cmd = cpu_to_le32(DT9812_R_MULTI_BYTE_REG); - cmd.u.read_multi_info.count = reg_count; + cmd->cmd = cpu_to_le32(DT9812_R_MULTI_BYTE_REG); + cmd->u.read_multi_info.count = reg_count; for (i = 0; i < reg_count; i++) - cmd.u.read_multi_info.address[i] = address[i]; + cmd->u.read_multi_info.address[i] = address[i];

/* DT9812 only responds to 32 byte writes!! */ ret = usb_bulk_msg(usb, usb_sndbulkpipe(usb, devpriv->cmd_wr.addr), - &cmd, 32, &count, DT9812_USB_TIMEOUT); + cmd, sizeof(*cmd), &count, DT9812_USB_TIMEOUT); if (ret) - return ret; + goto out;

- return usb_bulk_msg(usb, usb_rcvbulkpipe(usb, devpriv->cmd_rd.addr), - value, reg_count, &count, DT9812_USB_TIMEOUT); + ret = usb_bulk_msg(usb, usb_rcvbulkpipe(usb, devpriv->cmd_rd.addr), + buf, reg_count, &count, DT9812_USB_TIMEOUT); + if (!ret) { + if (count == reg_count) + memcpy(value, buf, reg_count); + else + ret = -EREMOTEIO; + } +out: + kfree(buf); + + return ret; }

static int dt9812_write_multiple_registers(struct comedi_device *dev, @@ -285,19 +326,27 @@ static int dt9812_write_multiple_registe { struct usb_device *usb = comedi_to_usb_dev(dev); struct dt9812_private *devpriv = dev->private; - struct dt9812_usb_cmd cmd; + struct dt9812_usb_cmd *cmd; int i, count; + int ret;

- cmd.cmd = cpu_to_le32(DT9812_W_MULTI_BYTE_REG); - cmd.u.read_multi_info.count = reg_count; + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (!cmd) + return -ENOMEM; + + cmd->cmd = cpu_to_le32(DT9812_W_MULTI_BYTE_REG); + cmd->u.read_multi_info.count = reg_count; for (i = 0; i < reg_count; i++) { - cmd.u.write_multi_info.write[i].address = address[i]; - cmd.u.write_multi_info.write[i].value = value[i]; + cmd->u.write_multi_info.write[i].address = address[i]; + cmd->u.write_multi_info.write[i].value = value[i]; }

/* DT9812 only responds to 32 byte writes!! */ - return usb_bulk_msg(usb, usb_sndbulkpipe(usb, devpriv->cmd_wr.addr), - &cmd, 32, &count, DT9812_USB_TIMEOUT); + ret = usb_bulk_msg(usb, usb_sndbulkpipe(usb, devpriv->cmd_wr.addr), + cmd, sizeof(*cmd), &count, DT9812_USB_TIMEOUT); + kfree(cmd); + + return ret; }

static int dt9812_rmw_multiple_registers(struct comedi_device *dev, @@ -306,17 +355,25 @@ static int dt9812_rmw_multiple_registers { struct usb_device *usb = comedi_to_usb_dev(dev); struct dt9812_private *devpriv = dev->private; - struct dt9812_usb_cmd cmd; + struct dt9812_usb_cmd *cmd; int i, count; + int ret; + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (!cmd) + return -ENOMEM;

- cmd.cmd = cpu_to_le32(DT9812_RMW_MULTI_BYTE_REG); - cmd.u.rmw_multi_info.count = reg_count; + cmd->cmd = cpu_to_le32(DT9812_RMW_MULTI_BYTE_REG); + cmd->u.rmw_multi_info.count = reg_count; for (i = 0; i < reg_count; i++) - cmd.u.rmw_multi_info.rmw[i] = rmw[i]; + cmd->u.rmw_multi_info.rmw[i] = rmw[i];

/* DT9812 only responds to 32 byte writes!! */ - return usb_bulk_msg(usb, usb_sndbulkpipe(usb, devpriv->cmd_wr.addr), - &cmd, 32, &count, DT9812_USB_TIMEOUT); + ret = usb_bulk_msg(usb, usb_sndbulkpipe(usb, devpriv->cmd_wr.addr), + cmd, sizeof(*cmd), &count, DT9812_USB_TIMEOUT); + kfree(cmd); + + return ret; }

static int dt9812_digital_in(struct comedi_device *dev, u8 *bits)

From: Johan Hovold johan@kernel.org

commit a23461c47482fc232ffc9b819539d1f837adf2b1 upstream.

The driver uses endpoint-sized USB transfer buffers but up until recently had no sanity checks on the sizes.

Commit e1f13c879a7c ("staging: comedi: check validity of wMaxPacketSize of usb endpoints found") inadvertently fixed NULL-pointer dereferences when accessing the transfer buffers in case a malicious device has a zero wMaxPacketSize.

Make sure to allocate buffers large enough to handle also the other accesses that are done without a size check (e.g. byte 18 in vmk80xx_cnt_insn_read() for the VMK8061_MODEL) to avoid writing beyond the buffers, for example, when doing descriptor fuzzing.

The original driver was for a low-speed device with 8-byte buffers. Support was later added for a device that uses bulk transfers and is presumably a full-speed device with a maximum 64-byte wMaxPacketSize.

Fixes: 985cafccbf9b ("Staging: Comedi: vmk80xx: Add k8061 support") Cc: stable@vger.kernel.org # 2.6.31 Signed-off-by: Johan Hovold johan@kernel.org Reviewed-by: Ian Abbott abbotti@mev.co.uk Link: https://lore.kernel.org/r/20211025114532.4599-4-johan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/comedi/drivers/vmk80xx.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/comedi/drivers/vmk80xx.c +++ b/drivers/comedi/drivers/vmk80xx.c @@ -90,6 +90,8 @@ enum { #define IC3_VERSION BIT(0) #define IC6_VERSION BIT(1)

+#define MIN_BUF_SIZE 64 + enum vmk80xx_model { VMK8055_MODEL, VMK8061_MODEL @@ -678,12 +680,12 @@ static int vmk80xx_alloc_usb_buffers(str struct vmk80xx_private *devpriv = dev->private; size_t size;

- size = usb_endpoint_maxp(devpriv->ep_rx); + size = max(usb_endpoint_maxp(devpriv->ep_rx), MIN_BUF_SIZE); devpriv->usb_rx_buf = kzalloc(size, GFP_KERNEL); if (!devpriv->usb_rx_buf) return -ENOMEM;

- size = usb_endpoint_maxp(devpriv->ep_tx); + size = max(usb_endpoint_maxp(devpriv->ep_rx), MIN_BUF_SIZE); devpriv->usb_tx_buf = kzalloc(size, GFP_KERNEL); if (!devpriv->usb_tx_buf) return -ENOMEM;

From: Johan Hovold johan@kernel.org

commit a56d3e40bda460edf3f8d6aac00ec0b322b4ab83 upstream.

USB bulk and interrupt message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ.

Note that the bulk-out transfer timeout was set to the endpoint bInterval value, which should be ignored for bulk endpoints and is typically set to zero. This meant that a failing bulk-out transfer would never time out.

Assume that the 10 second timeout used for all other transfers is more than enough also for the bulk-out endpoint.

Fixes: 985cafccbf9b ("Staging: Comedi: vmk80xx: Add k8061 support") Fixes: 951348b37738 ("staging: comedi: vmk80xx: wait for URBs to complete") Cc: stable@vger.kernel.org # 2.6.31 Signed-off-by: Johan Hovold johan@kernel.org Reviewed-by: Ian Abbott abbotti@mev.co.uk Link: https://lore.kernel.org/r/20211025114532.4599-6-johan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/comedi/drivers/vmk80xx.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-)

--- a/drivers/comedi/drivers/vmk80xx.c +++ b/drivers/comedi/drivers/vmk80xx.c @@ -91,6 +91,7 @@ enum { #define IC6_VERSION BIT(1)

#define MIN_BUF_SIZE 64 +#define PACKET_TIMEOUT 10000 /* ms */

enum vmk80xx_model { VMK8055_MODEL, @@ -169,10 +170,11 @@ static void vmk80xx_do_bulk_msg(struct c tx_size = usb_endpoint_maxp(devpriv->ep_tx); rx_size = usb_endpoint_maxp(devpriv->ep_rx);

- usb_bulk_msg(usb, tx_pipe, devpriv->usb_tx_buf, - tx_size, NULL, devpriv->ep_tx->bInterval); + usb_bulk_msg(usb, tx_pipe, devpriv->usb_tx_buf, tx_size, NULL, + PACKET_TIMEOUT);

- usb_bulk_msg(usb, rx_pipe, devpriv->usb_rx_buf, rx_size, NULL, HZ * 10); + usb_bulk_msg(usb, rx_pipe, devpriv->usb_rx_buf, rx_size, NULL, + PACKET_TIMEOUT); }

static int vmk80xx_read_packet(struct comedi_device *dev) @@ -191,7 +193,7 @@ static int vmk80xx_read_packet(struct co pipe = usb_rcvintpipe(usb, ep->bEndpointAddress); return usb_interrupt_msg(usb, pipe, devpriv->usb_rx_buf, usb_endpoint_maxp(ep), NULL, - HZ * 10); + PACKET_TIMEOUT); }

static int vmk80xx_write_packet(struct comedi_device *dev, int cmd) @@ -212,7 +214,7 @@ static int vmk80xx_write_packet(struct c pipe = usb_sndintpipe(usb, ep->bEndpointAddress); return usb_interrupt_msg(usb, pipe, devpriv->usb_tx_buf, usb_endpoint_maxp(ep), NULL, - HZ * 10); + PACKET_TIMEOUT); }

static int vmk80xx_reset_device(struct comedi_device *dev)

From: Johan Hovold johan@kernel.org

commit 4cfa36d312d6789448b59a7aae770ac8425017a3 upstream.

USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ.

Fixes: 8fc8598e61f6 ("Staging: Added Realtek rtl8192u driver to staging") Cc: stable@vger.kernel.org # 2.6.33 Acked-by: Larry Finger Larry.Finger@lwfinger.net Signed-off-by: Johan Hovold johan@kernel.org Link: https://lore.kernel.org/r/20211025120910.6339-2-johan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/staging/rtl8192u/r8192U_core.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-)

--- a/drivers/staging/rtl8192u/r8192U_core.c +++ b/drivers/staging/rtl8192u/r8192U_core.c @@ -229,7 +229,7 @@ int write_nic_byte_E(struct net_device *

status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), RTL8187_REQ_SET_REGS, RTL8187_REQT_WRITE, - indx | 0xfe00, 0, usbdata, 1, HZ / 2); + indx | 0xfe00, 0, usbdata, 1, 500); kfree(usbdata);

if (status < 0) { @@ -251,7 +251,7 @@ int read_nic_byte_E(struct net_device *d

status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), RTL8187_REQ_GET_REGS, RTL8187_REQT_READ, - indx | 0xfe00, 0, usbdata, 1, HZ / 2); + indx | 0xfe00, 0, usbdata, 1, 500); *data = *usbdata; kfree(usbdata);

@@ -279,7 +279,7 @@ int write_nic_byte(struct net_device *de status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), RTL8187_REQ_SET_REGS, RTL8187_REQT_WRITE, (indx & 0xff) | 0xff00, (indx >> 8) & 0x0f, - usbdata, 1, HZ / 2); + usbdata, 1, 500); kfree(usbdata);

if (status < 0) { @@ -305,7 +305,7 @@ int write_nic_word(struct net_device *de status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), RTL8187_REQ_SET_REGS, RTL8187_REQT_WRITE, (indx & 0xff) | 0xff00, (indx >> 8) & 0x0f, - usbdata, 2, HZ / 2); + usbdata, 2, 500); kfree(usbdata);

if (status < 0) { @@ -331,7 +331,7 @@ int write_nic_dword(struct net_device *d status = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), RTL8187_REQ_SET_REGS, RTL8187_REQT_WRITE, (indx & 0xff) | 0xff00, (indx >> 8) & 0x0f, - usbdata, 4, HZ / 2); + usbdata, 4, 500); kfree(usbdata);

if (status < 0) { @@ -355,7 +355,7 @@ int read_nic_byte(struct net_device *dev status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), RTL8187_REQ_GET_REGS, RTL8187_REQT_READ, (indx & 0xff) | 0xff00, (indx >> 8) & 0x0f, - usbdata, 1, HZ / 2); + usbdata, 1, 500); *data = *usbdata; kfree(usbdata);

@@ -380,7 +380,7 @@ int read_nic_word(struct net_device *dev status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), RTL8187_REQ_GET_REGS, RTL8187_REQT_READ, (indx & 0xff) | 0xff00, (indx >> 8) & 0x0f, - usbdata, 2, HZ / 2); + usbdata, 2, 500); *data = *usbdata; kfree(usbdata);

@@ -404,7 +404,7 @@ static int read_nic_word_E(struct net_de

status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), RTL8187_REQ_GET_REGS, RTL8187_REQT_READ, - indx | 0xfe00, 0, usbdata, 2, HZ / 2); + indx | 0xfe00, 0, usbdata, 2, 500); *data = *usbdata; kfree(usbdata);

@@ -430,7 +430,7 @@ int read_nic_dword(struct net_device *de status = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), RTL8187_REQ_GET_REGS, RTL8187_REQT_READ, (indx & 0xff) | 0xff00, (indx >> 8) & 0x0f, - usbdata, 4, HZ / 2); + usbdata, 4, 500); *data = *usbdata; kfree(usbdata);

From: Gustavo A. R. Silva gustavoars@kernel.org

commit a44f9d6f9dc1fb314a3f1ed2dcd4fbbcc3d9f892 upstream.

There is a wrong comparison of the total size of the loaded firmware css->fw->size with the size of a pointer to struct imgu_fw_header.

Turn binary_header into a flexible-array member[1][2], use the struct_size() helper and fix the wrong size comparison. Notice that the loaded firmware needs to contain at least one 'struct imgu_fw_info' item in the binary_header[] array.

It's also worth mentioning that

"css->fw->size < struct_size(css->fwp, binary_header, 1)"

with binary_header declared as a flexible-array member is equivalent to

"css->fw->size < sizeof(struct imgu_fw_header)"

with binary_header declared as a one-element array (as in the original code).

The replacement of the one-element array with a flexible-array member also helps with the ongoing efforts to globally enable -Warray-bounds and get us closer to being able to tighten the FORTIFY_SOURCE routines on memcpy().

[1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.10/process/deprecated.html#zero-length-an...

Link: https://github.com/KSPP/linux/issues/79 Link: https://github.com/KSPP/linux/issues/109

Fixes: 09d290f0ba21 ("media: staging/intel-ipu3: css: Add support for firmware management") Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva gustavoars@kernel.org Signed-off-by: Sakari Ailus sakari.ailus@linux.intel.com Signed-off-by: Mauro Carvalho Chehab mchehab+huawei@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/staging/media/ipu3/ipu3-css-fw.c | 7 +++---- drivers/staging/media/ipu3/ipu3-css-fw.h | 2 +- 2 files changed, 4 insertions(+), 5 deletions(-)

--- a/drivers/staging/media/ipu3/ipu3-css-fw.c +++ b/drivers/staging/media/ipu3/ipu3-css-fw.c @@ -124,12 +124,11 @@ int imgu_css_fw_init(struct imgu_css *cs /* Check and display fw header info */

css->fwp = (struct imgu_fw_header *)css->fw->data; - if (css->fw->size < sizeof(struct imgu_fw_header *) || + if (css->fw->size < struct_size(css->fwp, binary_header, 1) || css->fwp->file_header.h_size != sizeof(struct imgu_fw_bi_file_h)) goto bad_fw; - if (sizeof(struct imgu_fw_bi_file_h) + - css->fwp->file_header.binary_nr * sizeof(struct imgu_fw_info) > - css->fw->size) + if (struct_size(css->fwp, binary_header, + css->fwp->file_header.binary_nr) > css->fw->size) goto bad_fw;

dev_info(dev, "loaded firmware version %.64s, %u binaries, %zu bytes\n", --- a/drivers/staging/media/ipu3/ipu3-css-fw.h +++ b/drivers/staging/media/ipu3/ipu3-css-fw.h @@ -171,7 +171,7 @@ struct imgu_fw_bi_file_h {

struct imgu_fw_header { struct imgu_fw_bi_file_h file_header; - struct imgu_fw_info binary_header[1]; /* binary_nr items */ + struct imgu_fw_info binary_header[]; /* binary_nr items */ };

/******************* Firmware functions *******************/