A kernel memory leak was identified by the 'ioctl_sg01' test from Linux Test Project (LTP). The following bytes were maily observed: 0x53425355.
When USB storage devices incorrectly skip the data phase with status data, the code extracts/validates the CSW from the sg buffer, but fails to clear it afterwards. This leaves status protocol data in srb's transfer buffer, such as the US_BULK_CS_SIGN 'USBS' signature observed here. Thus, this leads to USB protocols leaks to user space through SCSI generic (/dev/sg*) interfaces, such as the one seen here when the LTP test requested 512 KiB.
Fix the leak by zeroing the CSW data in srb's transfer buffer immediately after the validation of devices that skip data phase.
Note: Differently from CVE-2018-1000204, which fixed a big leak by zero- ing pages at allocation time, this leak occurs after allocation, when USB protocol data is written to already-allocated sg pages.
Fixes: a45b599ad808 ("scsi: sg: allocate with __GFP_ZERO in sg_build_indirect()") Cc: stable@vger.kernel.org Signed-off-by: Desnes Nunes desnesn@redhat.com --- drivers/usb/storage/transport.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c index 1aa1bd26c81f..8e9f6459e197 100644 --- a/drivers/usb/storage/transport.c +++ b/drivers/usb/storage/transport.c @@ -1200,7 +1200,17 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us) US_BULK_CS_WRAP_LEN && bcs->Signature == cpu_to_le32(US_BULK_CS_SIGN)) { + unsigned char buf[US_BULK_CS_WRAP_LEN]; + + sg = NULL; + offset = 0; + memset(buf, 0, US_BULK_CS_WRAP_LEN); usb_stor_dbg(us, "Device skipped data phase\n"); + + if (usb_stor_access_xfer_buf(buf, US_BULK_CS_WRAP_LEN, srb, + &sg, &offset, TO_XFER_BUF) != US_BULK_CS_WRAP_LEN) + usb_stor_dbg(us, "Failed to clear CSW data\n"); + scsi_set_resid(srb, transfer_length); goto skipped_data_phase; }
On Wed, Oct 29, 2025 at 04:14:13PM -0300, Desnes Nunes wrote:
A kernel memory leak was identified by the 'ioctl_sg01' test from Linux Test Project (LTP). The following bytes were maily observed: 0x53425355.
When USB storage devices incorrectly skip the data phase with status data, the code extracts/validates the CSW from the sg buffer, but fails to clear it afterwards. This leaves status protocol data in srb's transfer buffer, such as the US_BULK_CS_SIGN 'USBS' signature observed here. Thus, this leads to USB protocols leaks to user space through SCSI generic (/dev/sg*) interfaces, such as the one seen here when the LTP test requested 512 KiB.
Fix the leak by zeroing the CSW data in srb's transfer buffer immediately after the validation of devices that skip data phase.
Note: Differently from CVE-2018-1000204, which fixed a big leak by zero- ing pages at allocation time, this leak occurs after allocation, when USB protocol data is written to already-allocated sg pages.
Fixes: a45b599ad808 ("scsi: sg: allocate with __GFP_ZERO in sg_build_indirect()") Cc: stable@vger.kernel.org Signed-off-by: Desnes Nunes desnesn@redhat.com
drivers/usb/storage/transport.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c index 1aa1bd26c81f..8e9f6459e197 100644 --- a/drivers/usb/storage/transport.c +++ b/drivers/usb/storage/transport.c @@ -1200,7 +1200,17 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us) US_BULK_CS_WRAP_LEN && bcs->Signature == cpu_to_le32(US_BULK_CS_SIGN)) {
unsigned char buf[US_BULK_CS_WRAP_LEN];
You don't have to define another buffer here. bcs is still available and it is exactly the right size.
Alan Stern
sg = NULL;offset = 0;memset(buf, 0, US_BULK_CS_WRAP_LEN); usb_stor_dbg(us, "Device skipped data phase\n");if (usb_stor_access_xfer_buf(buf, US_BULK_CS_WRAP_LEN, srb,&sg, &offset, TO_XFER_BUF) != US_BULK_CS_WRAP_LEN)usb_stor_dbg(us, "Failed to clear CSW data\n");scsi_set_resid(srb, transfer_length); goto skipped_data_phase; }-- 2.51.0
Hello Alan,
On Wed, Oct 29, 2025 at 6:49 PM Alan Stern stern@rowland.harvard.edu wrote:
On Wed, Oct 29, 2025 at 04:14:13PM -0300, Desnes Nunes wrote:
A kernel memory leak was identified by the 'ioctl_sg01' test from Linux Test Project (LTP). The following bytes were maily observed: 0x53425355.
When USB storage devices incorrectly skip the data phase with status data, the code extracts/validates the CSW from the sg buffer, but fails to clear it afterwards. This leaves status protocol data in srb's transfer buffer, such as the US_BULK_CS_SIGN 'USBS' signature observed here. Thus, this leads to USB protocols leaks to user space through SCSI generic (/dev/sg*) interfaces, such as the one seen here when the LTP test requested 512 KiB.
Fix the leak by zeroing the CSW data in srb's transfer buffer immediately after the validation of devices that skip data phase.
Note: Differently from CVE-2018-1000204, which fixed a big leak by zero- ing pages at allocation time, this leak occurs after allocation, when USB protocol data is written to already-allocated sg pages.
Fixes: a45b599ad808 ("scsi: sg: allocate with __GFP_ZERO in sg_build_indirect()") Cc: stable@vger.kernel.org Signed-off-by: Desnes Nunes desnesn@redhat.com
drivers/usb/storage/transport.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c index 1aa1bd26c81f..8e9f6459e197 100644 --- a/drivers/usb/storage/transport.c +++ b/drivers/usb/storage/transport.c @@ -1200,7 +1200,17 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us) US_BULK_CS_WRAP_LEN && bcs->Signature == cpu_to_le32(US_BULK_CS_SIGN)) {
unsigned char buf[US_BULK_CS_WRAP_LEN];You don't have to define another buffer here. bcs is still available and it is exactly the right size.
Alan Stern
Sure - will send a v2 using bcs instead of the new buffer.
Thanks for the review.
Hello Alan,
On Wed, Oct 29, 2025 at 9:36 PM Desnes Nunes desnesn@redhat.com wrote:
Hello Alan,
On Wed, Oct 29, 2025 at 6:49 PM Alan Stern stern@rowland.harvard.edu wrote:
On Wed, Oct 29, 2025 at 04:14:13PM -0300, Desnes Nunes wrote:
A kernel memory leak was identified by the 'ioctl_sg01' test from Linux Test Project (LTP). The following bytes were maily observed: 0x53425355.
When USB storage devices incorrectly skip the data phase with status data, the code extracts/validates the CSW from the sg buffer, but fails to clear it afterwards. This leaves status protocol data in srb's transfer buffer, such as the US_BULK_CS_SIGN 'USBS' signature observed here. Thus, this leads to USB protocols leaks to user space through SCSI generic (/dev/sg*) interfaces, such as the one seen here when the LTP test requested 512 KiB.
Fix the leak by zeroing the CSW data in srb's transfer buffer immediately after the validation of devices that skip data phase.
Note: Differently from CVE-2018-1000204, which fixed a big leak by zero- ing pages at allocation time, this leak occurs after allocation, when USB protocol data is written to already-allocated sg pages.
Fixes: a45b599ad808 ("scsi: sg: allocate with __GFP_ZERO in sg_build_indirect()") Cc: stable@vger.kernel.org Signed-off-by: Desnes Nunes desnesn@redhat.com
drivers/usb/storage/transport.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c index 1aa1bd26c81f..8e9f6459e197 100644 --- a/drivers/usb/storage/transport.c +++ b/drivers/usb/storage/transport.c @@ -1200,7 +1200,17 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us) US_BULK_CS_WRAP_LEN && bcs->Signature == cpu_to_le32(US_BULK_CS_SIGN)) {
unsigned char buf[US_BULK_CS_WRAP_LEN];You don't have to define another buffer here. bcs is still available and it is exactly the right size.
Alan Stern
Sure - will send a v2 using bcs instead of the new buffer.
Actually, my original strategy to avoid the leak was copying a new zeroed buf over srb's transfer_buffer, as soon as the skipped data phase was identified.
It is true that the cs wrapper is the right size, but bcs at this point contains validated CSW data, which is needed later in the code when handling the skipped_data_phase of the device.
I think zeroing 13 bytes of bcs at this point, instead of creating a new buffer, would delete USB protocol information that is necessary later in usb_stor_Bulk_transport().
Can you please elaborate on how I can zero srb's transfer buffer using bcs, but without zeroing bcs? I may be missing something.
Thanks & Regards,
linux-stable-mirror@lists.linaro.org
-
Alan Stern -
Desnes Nunes