From: Dominique Martinet asmadeus@codewreck.org
[ Upstream commit 4a73edab69d3a6623f03817fe950a2d9585f80e4 ]
Similarly to the previous patch: offs can be used in handle_rerrors without initializing on small payloads; in this case handle_rerrors will not use it because of the size check, but it doesn't hurt to make sure it is zero to please scan-build.
This fixes the following warning: net/9p/trans_virtio.c:539:3: warning: 3rd function call argument is an uninitialized value [core.CallAndMessage] handle_rerror(req, in_hdr_len, offs, in_pages); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Reviewed-by: Simon Horman simon.horman@corigine.com Signed-off-by: Dominique Martinet asmadeus@codewreck.org Signed-off-by: Eric Van Hensbergen ericvh@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/9p/trans_virtio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/9p/trans_virtio.c b/net/9p/trans_virtio.c index f582351d84ecb..36b5f72e2165c 100644 --- a/net/9p/trans_virtio.c +++ b/net/9p/trans_virtio.c @@ -394,7 +394,7 @@ p9_virtio_zc_request(struct p9_client *client, struct p9_req_t *req, struct page **in_pages = NULL, **out_pages = NULL; struct virtio_chan *chan = client->trans; struct scatterlist *sgs[4]; - size_t offs; + size_t offs = 0; int need_drop = 0; int kicked = 0;
From: Dmytro Maluka dmy@semihalf.com
[ Upstream commit 91e292917dad64ab8d1d5ca2ab3069ad9dac6f72 ]
da7219_aad_suspend() disables jack detection, which should prevent generating new interrupts by DA7219 while suspended. However, there is a theoretical possibility that there is a pending interrupt generated just before suspending DA7219 and not handled yet, so the IRQ handler may still run after DA7219 is suspended. To prevent that, wait until the pending IRQ handling is done.
This patch arose as an attempt to fix the following I2C failure occurring sometimes during system suspend or resume:
[ 355.876211] i2c_designware i2c_designware.3: Transfer while suspended [ 355.876245] WARNING: CPU: 2 PID: 3576 at drivers/i2c/busses/i2c-designware-master.c:570 i2c_dw_xfer+0x411/0x440 ... [ 355.876462] Call Trace: [ 355.876468] <TASK> [ 355.876475] ? update_load_avg+0x1b3/0x615 [ 355.876484] __i2c_transfer+0x101/0x1d8 [ 355.876494] i2c_transfer+0x74/0x10d [ 355.876504] regmap_i2c_read+0x6a/0x9c [ 355.876513] _regmap_raw_read+0x179/0x223 [ 355.876521] regmap_raw_read+0x1e1/0x28e [ 355.876527] regmap_bulk_read+0x17d/0x1ba [ 355.876532] ? __wake_up+0xed/0x1bb [ 355.876542] da7219_aad_irq_thread+0x54/0x2c9 [snd_soc_da7219 5fb8ebb2179cf2fea29af090f3145d68ed8e2184] [ 355.876556] irq_thread+0x13c/0x231 [ 355.876563] ? irq_forced_thread_fn+0x5f/0x5f [ 355.876570] ? irq_thread_fn+0x4d/0x4d [ 355.876576] kthread+0x13a/0x152 [ 355.876581] ? synchronize_irq+0xc3/0xc3 [ 355.876587] ? kthread_blkcg+0x31/0x31 [ 355.876592] ret_from_fork+0x1f/0x30 [ 355.876601] </TASK>
which indicates that the AAD IRQ handler is unexpectedly running when DA7219 is suspended, and as a result, is trying to read data from DA7219 over I2C and is hitting the I2C driver "Transfer while suspended" failure.
However, with this patch the above failure is still reproducible. So this patch does not fix any real observed issue so far, but at least is useful for confirming that the above issue is not caused by a pending IRQ but rather looks like a DA7219 hardware issue with an IRQ unexpectedly generated after jack detection is already disabled.
Signed-off-by: Dmytro Maluka dmy@semihalf.com Link: https://lore.kernel.org/r/20230717193737.161784-2-dmy@semihalf.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/da7219-aad.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/sound/soc/codecs/da7219-aad.c b/sound/soc/codecs/da7219-aad.c index 4f2a96e9fd45b..a652f154d8e52 100644 --- a/sound/soc/codecs/da7219-aad.c +++ b/sound/soc/codecs/da7219-aad.c @@ -855,6 +855,8 @@ void da7219_aad_suspend(struct snd_soc_component *component) } } } + + synchronize_irq(da7219_aad->irq); }
void da7219_aad_resume(struct snd_soc_component *component)
From: Dmytro Maluka dmy@semihalf.com
[ Upstream commit f0691dc16206f21b13c464434366e2cd632b8ed7 ]
When handling an AAD interrupt, if IRQ events read failed (for example, due to i2c "Transfer while suspended" failure, i.e. when attempting to read it while DA7219 is suspended, which may happen due to a spurious AAD interrupt), the events array contains garbage uninitialized values. So instead of trying to interprete those values and doing any actions based on them (potentially resulting in misbehavior, e.g. reporting bogus events), refuse to handle the interrupt.
Signed-off-by: Dmytro Maluka dmy@semihalf.com Link: https://lore.kernel.org/r/20230717193737.161784-3-dmy@semihalf.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/da7219-aad.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/sound/soc/codecs/da7219-aad.c b/sound/soc/codecs/da7219-aad.c index a652f154d8e52..befe26749bc2b 100644 --- a/sound/soc/codecs/da7219-aad.c +++ b/sound/soc/codecs/da7219-aad.c @@ -347,11 +347,15 @@ static irqreturn_t da7219_aad_irq_thread(int irq, void *data) struct da7219_priv *da7219 = snd_soc_component_get_drvdata(component); u8 events[DA7219_AAD_IRQ_REG_MAX]; u8 statusa; - int i, report = 0, mask = 0; + int i, ret, report = 0, mask = 0;
/* Read current IRQ events */ - regmap_bulk_read(da7219->regmap, DA7219_ACCDET_IRQ_EVENT_A, - events, DA7219_AAD_IRQ_REG_MAX); + ret = regmap_bulk_read(da7219->regmap, DA7219_ACCDET_IRQ_EVENT_A, + events, DA7219_AAD_IRQ_REG_MAX); + if (ret) { + dev_warn_ratelimited(component->dev, "Failed to read IRQ events: %d\n", ret); + return IRQ_NONE; + }
if (!events[DA7219_AAD_IRQ_REG_A] && !events[DA7219_AAD_IRQ_REG_B]) return IRQ_NONE;
From: Yuanjun Gong ruc_gongyuanjun@163.com
[ Upstream commit 8d01da0a1db237c44c92859ce3612df7af8d3a53 ]
in atl1c_tso_csum, it should check the return value of pskb_trim(), and return an error code if an unexpected value is returned by pskb_trim().
Signed-off-by: Yuanjun Gong ruc_gongyuanjun@163.com Reviewed-by: Simon Horman simon.horman@corigine.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/atheros/atl1c/atl1c_main.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c index 2b239ecea05f2..ff28dbf515747 100644 --- a/drivers/net/ethernet/atheros/atl1c/atl1c_main.c +++ b/drivers/net/ethernet/atheros/atl1c/atl1c_main.c @@ -1989,8 +1989,11 @@ static int atl1c_tso_csum(struct atl1c_adapter *adapter, real_len = (((unsigned char *)ip_hdr(skb) - skb->data) + ntohs(ip_hdr(skb)->tot_len));
- if (real_len < skb->len) - pskb_trim(skb, real_len); + if (real_len < skb->len) { + err = pskb_trim(skb, real_len); + if (err) + return err; + }
hdr_len = (skb_transport_offset(skb) + tcp_hdrlen(skb)); if (unlikely(skb->len == hdr_len)) {
From: Jiri Benc jbenc@redhat.com
[ Upstream commit 17a0a64448b568442a101de09575f81ffdc45d15 ]
The vxlan_parse_gpe_hdr function extracts the next protocol value from the GPE header and marks GPE bits as parsed.
In order to be used in the next patch, split the function into protocol extraction and bit marking. The bit marking is meaningful only in vxlan_rcv; move it directly there.
Rename the function to vxlan_parse_gpe_proto to reflect what it now does. Remove unused arguments skb and vxflags. Move the function earlier in the file to allow it to be called from more places in the next patch.
Signed-off-by: Jiri Benc jbenc@redhat.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/vxlan.c | 58 ++++++++++++++++++++++----------------------- 1 file changed, 28 insertions(+), 30 deletions(-)
diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c index f4869b1836f30..9da53b923e2bc 100644 --- a/drivers/net/vxlan.c +++ b/drivers/net/vxlan.c @@ -698,6 +698,32 @@ static int vxlan_fdb_append(struct vxlan_fdb *f, return 1; }
+static bool vxlan_parse_gpe_proto(struct vxlanhdr *hdr, __be16 *protocol) +{ + struct vxlanhdr_gpe *gpe = (struct vxlanhdr_gpe *)hdr; + + /* Need to have Next Protocol set for interfaces in GPE mode. */ + if (!gpe->np_applied) + return false; + /* "The initial version is 0. If a receiver does not support the + * version indicated it MUST drop the packet. + */ + if (gpe->version != 0) + return false; + /* "When the O bit is set to 1, the packet is an OAM packet and OAM + * processing MUST occur." However, we don't implement OAM + * processing, thus drop the packet. + */ + if (gpe->oam_flag) + return false; + + *protocol = tun_p_to_eth_p(gpe->next_protocol); + if (!*protocol) + return false; + + return true; +} + static struct vxlanhdr *vxlan_gro_remcsum(struct sk_buff *skb, unsigned int off, struct vxlanhdr *vh, size_t hdrlen, @@ -1564,35 +1590,6 @@ static void vxlan_parse_gbp_hdr(struct vxlanhdr *unparsed, unparsed->vx_flags &= ~VXLAN_GBP_USED_BITS; }
-static bool vxlan_parse_gpe_hdr(struct vxlanhdr *unparsed, - __be16 *protocol, - struct sk_buff *skb, u32 vxflags) -{ - struct vxlanhdr_gpe *gpe = (struct vxlanhdr_gpe *)unparsed; - - /* Need to have Next Protocol set for interfaces in GPE mode. */ - if (!gpe->np_applied) - return false; - /* "The initial version is 0. If a receiver does not support the - * version indicated it MUST drop the packet. - */ - if (gpe->version != 0) - return false; - /* "When the O bit is set to 1, the packet is an OAM packet and OAM - * processing MUST occur." However, we don't implement OAM - * processing, thus drop the packet. - */ - if (gpe->oam_flag) - return false; - - *protocol = tun_p_to_eth_p(gpe->next_protocol); - if (!*protocol) - return false; - - unparsed->vx_flags &= ~VXLAN_GPE_USED_BITS; - return true; -} - static bool vxlan_set_mac(struct vxlan_dev *vxlan, struct vxlan_sock *vs, struct sk_buff *skb, __be32 vni) @@ -1694,8 +1691,9 @@ static int vxlan_rcv(struct sock *sk, struct sk_buff *skb) * used by VXLAN extensions if explicitly requested. */ if (vs->flags & VXLAN_F_GPE) { - if (!vxlan_parse_gpe_hdr(&unparsed, &protocol, skb, vs->flags)) + if (!vxlan_parse_gpe_proto(&unparsed, &protocol)) goto drop; + unparsed.vx_flags &= ~VXLAN_GPE_USED_BITS; raw_proto = true; }
From: Ben Hutchings benh@debian.org
[ Upstream commit 922a9bd138101e3e5718f0f4d40dba68ef89bb43 ]
gas supports several different forms for .section for ELF targets, including: .section NAME [, "FLAGS"[, @TYPE[,FLAG_SPECIFIC_ARGUMENTS]]] and: .section "NAME"[, #FLAGS...]
In several places we use a mix of these two forms: .section NAME, #FLAGS...
A current development snapshot of binutils (2.40.50.20230611) treats this mixed syntax as an error.
Change to consistently use: .section NAME, "FLAGS" as is used elsewhere in the kernel.
Link: https://buildd.debian.org/status/fetch.php?pkg=linux&arch=m68k&ver=6... Signed-off-by: Ben Hutchings benh@debian.org Tested-by: Jan-Benedict Glaw jbglaw@lug-owl.de Link: https://lore.kernel.org/r/ZIyBaueWT9jnTwRC@decadent.org.uk Signed-off-by: Geert Uytterhoeven geert@linux-m68k.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/m68k/fpsp040/skeleton.S | 4 ++-- arch/m68k/ifpsp060/os.S | 4 ++-- arch/m68k/kernel/relocate_kernel.S | 4 ++-- 3 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/arch/m68k/fpsp040/skeleton.S b/arch/m68k/fpsp040/skeleton.S index a8f41615d94a7..31a9c634c81ed 100644 --- a/arch/m68k/fpsp040/skeleton.S +++ b/arch/m68k/fpsp040/skeleton.S @@ -499,12 +499,12 @@ in_ea: dbf %d0,morein rts
- .section .fixup,#alloc,#execinstr + .section .fixup,"ax" .even 1: jbra fpsp040_die
- .section __ex_table,#alloc + .section __ex_table,"a" .align 4
.long in_ea,1b diff --git a/arch/m68k/ifpsp060/os.S b/arch/m68k/ifpsp060/os.S index 7a0d6e4280665..89e2ec224ab6c 100644 --- a/arch/m68k/ifpsp060/os.S +++ b/arch/m68k/ifpsp060/os.S @@ -379,11 +379,11 @@ _060_real_access:
| Execption handling for movs access to illegal memory - .section .fixup,#alloc,#execinstr + .section .fixup,"ax" .even 1: moveq #-1,%d1 rts -.section __ex_table,#alloc +.section __ex_table,"a" .align 4 .long dmrbuae,1b .long dmrwuae,1b diff --git a/arch/m68k/kernel/relocate_kernel.S b/arch/m68k/kernel/relocate_kernel.S index ab0f1e7d46535..f7667079e08e9 100644 --- a/arch/m68k/kernel/relocate_kernel.S +++ b/arch/m68k/kernel/relocate_kernel.S @@ -26,7 +26,7 @@ ENTRY(relocate_new_kernel) lea %pc@(.Lcopy),%a4 2: addl #0x00000000,%a4 /* virt_to_phys() */
- .section ".m68k_fixup","aw" + .section .m68k_fixup,"aw" .long M68K_FIXUP_MEMOFFSET, 2b+2 .previous
@@ -49,7 +49,7 @@ ENTRY(relocate_new_kernel) lea %pc@(.Lcont040),%a4 5: addl #0x00000000,%a4 /* virt_to_phys() */
- .section ".m68k_fixup","aw" + .section .m68k_fixup,"aw" .long M68K_FIXUP_MEMOFFSET, 5b+2 .previous
From: Stefan Haberland sth@linux.ibm.com
[ Upstream commit acea28a6b74f458defda7417d2217b051ba7d444 ]
If a DASD request fails an error recovery procedure (ERP) request might be built as a copy of the original request to do error recovery.
The ERP request gets a number of retries assigned. This number is always 256 no matter what other value might have been set for the original request. This is not what is expected when a user specifies a certain amount of retries for the device via sysfs.
Correctly use the number of retries of the original request for ERP requests.
Signed-off-by: Stefan Haberland sth@linux.ibm.com Reviewed-by: Jan Hoeppner hoeppner@linux.ibm.com Link: https://lore.kernel.org/r/20230721193647.3889634-3-sth@linux.ibm.com Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/s390/block/dasd_3990_erp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/s390/block/dasd_3990_erp.c b/drivers/s390/block/dasd_3990_erp.c index ee73b0607e47c..8598c792ded30 100644 --- a/drivers/s390/block/dasd_3990_erp.c +++ b/drivers/s390/block/dasd_3990_erp.c @@ -2436,7 +2436,7 @@ static struct dasd_ccw_req *dasd_3990_erp_add_erp(struct dasd_ccw_req *cqr) erp->block = cqr->block; erp->magic = cqr->magic; erp->expires = cqr->expires; - erp->retries = 256; + erp->retries = device->default_retries; erp->buildclk = get_tod_clock(); erp->status = DASD_CQR_FILLED;
From: Stefan Haberland sth@linux.ibm.com
[ Upstream commit 8a2278ce9c25048d999fe1a3561def75d963f471 ]
The DASD device driver has a function to requeue requests to the blocklayer. This function is used in various cases when basic settings for the device have to be changed like High Performance Ficon related parameters or copy pair settings.
The functions iterates over the device->ccw_queue and also removes the requests from the block->ccw_queue. In case the device is started on an alias device instead of the base device it might be removed from the block->ccw_queue without having it canceled properly before. This might lead to a hanging device since the request is no longer on a queue and can not be handled properly.
Fix by iterating over the block->ccw_queue instead of the device->ccw_queue. This will take care of all blocklayer related requests and handle them on all associated DASD devices.
Signed-off-by: Stefan Haberland sth@linux.ibm.com Reviewed-by: Jan Hoeppner hoeppner@linux.ibm.com Link: https://lore.kernel.org/r/20230721193647.3889634-4-sth@linux.ibm.com Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/s390/block/dasd.c | 125 +++++++++++++++----------------------- 1 file changed, 48 insertions(+), 77 deletions(-)
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c index 187565830b5b4..58027cdc58e3e 100644 --- a/drivers/s390/block/dasd.c +++ b/drivers/s390/block/dasd.c @@ -2985,41 +2985,32 @@ static void _dasd_wake_block_flush_cb(struct dasd_ccw_req *cqr, void *data) * Requeue a request back to the block request queue * only works for block requests */ -static int _dasd_requeue_request(struct dasd_ccw_req *cqr) +static void _dasd_requeue_request(struct dasd_ccw_req *cqr) { - struct dasd_block *block = cqr->block; struct request *req;
- if (!block) - return -EINVAL; /* * If the request is an ERP request there is nothing to requeue. * This will be done with the remaining original request. */ if (cqr->refers) - return 0; + return; spin_lock_irq(&cqr->dq->lock); req = (struct request *) cqr->callback_data; blk_mq_requeue_request(req, true); spin_unlock_irq(&cqr->dq->lock);
- return 0; + return; }
-/* - * Go through all request on the dasd_block request queue, cancel them - * on the respective dasd_device, and return them to the generic - * block layer. - */ -static int dasd_flush_block_queue(struct dasd_block *block) +static int _dasd_requests_to_flushqueue(struct dasd_block *block, + struct list_head *flush_queue) { struct dasd_ccw_req *cqr, *n; - int rc, i; - struct list_head flush_queue; unsigned long flags; + int rc, i;
- INIT_LIST_HEAD(&flush_queue); - spin_lock_bh(&block->queue_lock); + spin_lock_irqsave(&block->queue_lock, flags); rc = 0; restart: list_for_each_entry_safe(cqr, n, &block->ccw_queue, blocklist) { @@ -3034,13 +3025,32 @@ static int dasd_flush_block_queue(struct dasd_block *block) * is returned from the dasd_device layer. */ cqr->callback = _dasd_wake_block_flush_cb; - for (i = 0; cqr != NULL; cqr = cqr->refers, i++) - list_move_tail(&cqr->blocklist, &flush_queue); + for (i = 0; cqr; cqr = cqr->refers, i++) + list_move_tail(&cqr->blocklist, flush_queue); if (i > 1) /* moved more than one request - need to restart */ goto restart; } - spin_unlock_bh(&block->queue_lock); + spin_unlock_irqrestore(&block->queue_lock, flags); + + return rc; +} + +/* + * Go through all request on the dasd_block request queue, cancel them + * on the respective dasd_device, and return them to the generic + * block layer. + */ +static int dasd_flush_block_queue(struct dasd_block *block) +{ + struct dasd_ccw_req *cqr, *n; + struct list_head flush_queue; + unsigned long flags; + int rc; + + INIT_LIST_HEAD(&flush_queue); + rc = _dasd_requests_to_flushqueue(block, &flush_queue); + /* Now call the callback function of flushed requests */ restart_cb: list_for_each_entry_safe(cqr, n, &flush_queue, blocklist) { @@ -3977,75 +3987,36 @@ EXPORT_SYMBOL_GPL(dasd_generic_space_avail); */ static int dasd_generic_requeue_all_requests(struct dasd_device *device) { + struct dasd_block *block = device->block; struct list_head requeue_queue; struct dasd_ccw_req *cqr, *n; - struct dasd_ccw_req *refers; int rc;
- INIT_LIST_HEAD(&requeue_queue); - spin_lock_irq(get_ccwdev_lock(device->cdev)); - rc = 0; - list_for_each_entry_safe(cqr, n, &device->ccw_queue, devlist) { - /* Check status and move request to flush_queue */ - if (cqr->status == DASD_CQR_IN_IO) { - rc = device->discipline->term_IO(cqr); - if (rc) { - /* unable to terminate requeust */ - dev_err(&device->cdev->dev, - "Unable to terminate request %p " - "on suspend\n", cqr); - spin_unlock_irq(get_ccwdev_lock(device->cdev)); - dasd_put_device(device); - return rc; - } - } - list_move_tail(&cqr->devlist, &requeue_queue); - } - spin_unlock_irq(get_ccwdev_lock(device->cdev)); - - list_for_each_entry_safe(cqr, n, &requeue_queue, devlist) { - wait_event(dasd_flush_wq, - (cqr->status != DASD_CQR_CLEAR_PENDING)); + if (!block) + return 0;
- /* - * requeue requests to blocklayer will only work - * for block device requests - */ - if (_dasd_requeue_request(cqr)) - continue; + INIT_LIST_HEAD(&requeue_queue); + rc = _dasd_requests_to_flushqueue(block, &requeue_queue);
- /* remove requests from device and block queue */ - list_del_init(&cqr->devlist); - while (cqr->refers != NULL) { - refers = cqr->refers; - /* remove the request from the block queue */ - list_del(&cqr->blocklist); - /* free the finished erp request */ - dasd_free_erp_request(cqr, cqr->memdev); - cqr = refers; + /* Now call the callback function of flushed requests */ +restart_cb: + list_for_each_entry_safe(cqr, n, &requeue_queue, blocklist) { + wait_event(dasd_flush_wq, (cqr->status < DASD_CQR_QUEUED)); + /* Process finished ERP request. */ + if (cqr->refers) { + spin_lock_bh(&block->queue_lock); + __dasd_process_erp(block->base, cqr); + spin_unlock_bh(&block->queue_lock); + /* restart list_for_xx loop since dasd_process_erp + * might remove multiple elements + */ + goto restart_cb; } - - /* - * _dasd_requeue_request already checked for a valid - * blockdevice, no need to check again - * all erp requests (cqr->refers) have a cqr->block - * pointer copy from the original cqr - */ + _dasd_requeue_request(cqr); list_del_init(&cqr->blocklist); cqr->block->base->discipline->free_cp( cqr, (struct request *) cqr->callback_data); } - - /* - * if requests remain then they are internal request - * and go back to the device queue - */ - if (!list_empty(&requeue_queue)) { - /* move freeze_queue to start of the ccw_queue */ - spin_lock_irq(get_ccwdev_lock(device->cdev)); - list_splice_tail(&requeue_queue, &device->ccw_queue); - spin_unlock_irq(get_ccwdev_lock(device->cdev)); - } dasd_schedule_device_bh(device); return rc; }
From: Winston Wen wentao@uniontech.com
[ Upstream commit c1ed39ec116272935528ca9b348b8ee79b0791da ]
load_nls() take a char * parameter, use it to find nls module in list or construct the module name to load it.
This change make load_nls() take a const parameter, so we don't need do some cast like this:
ses->local_nls = load_nls((char *)ctx->local_nls->charset);
Suggested-by: Stephen Rothwell sfr@canb.auug.org.au Signed-off-by: Winston Wen wentao@uniontech.com Reviewed-by: Paulo Alcantara pc@manguebit.com Reviewed-by: Christian Brauner brauner@kernel.org Signed-off-by: Steve French stfrench@microsoft.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/nls/nls_base.c | 4 ++-- include/linux/nls.h | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/fs/nls/nls_base.c b/fs/nls/nls_base.c index 52ccd34b1e792..a026dbd3593f6 100644 --- a/fs/nls/nls_base.c +++ b/fs/nls/nls_base.c @@ -272,7 +272,7 @@ int unregister_nls(struct nls_table * nls) return -EINVAL; }
-static struct nls_table *find_nls(char *charset) +static struct nls_table *find_nls(const char *charset) { struct nls_table *nls; spin_lock(&nls_lock); @@ -288,7 +288,7 @@ static struct nls_table *find_nls(char *charset) return nls; }
-struct nls_table *load_nls(char *charset) +struct nls_table *load_nls(const char *charset) { return try_then_request_module(find_nls(charset), "nls_%s", charset); } diff --git a/include/linux/nls.h b/include/linux/nls.h index 499e486b3722d..e0bf8367b274a 100644 --- a/include/linux/nls.h +++ b/include/linux/nls.h @@ -47,7 +47,7 @@ enum utf16_endian { /* nls_base.c */ extern int __register_nls(struct nls_table *, struct module *); extern int unregister_nls(struct nls_table *); -extern struct nls_table *load_nls(char *); +extern struct nls_table *load_nls(const char *charset); extern void unload_nls(struct nls_table *); extern struct nls_table *load_nls_default(void); #define register_nls(nls) __register_nls((nls), THIS_MODULE)
From: Edgar ljijcj@163.com
[ Upstream commit d20d35d1ad62c6cca36368c1e8f29335a068659e ]
According to the datasheet, the DMIC config should be changed to { 0, 2 ,3 }
Signed-off-by: Edgar ljijcj@163.com Link: https://lore.kernel.org/r/20230719054722.401954-1-ljijcj@163.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/es8316.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/codecs/es8316.c b/sound/soc/codecs/es8316.c index 131f41cccbe65..dd2df9a903e05 100644 --- a/sound/soc/codecs/es8316.c +++ b/sound/soc/codecs/es8316.c @@ -153,7 +153,7 @@ static const char * const es8316_dmic_txt[] = { "dmic data at high level", "dmic data at low level", }; -static const unsigned int es8316_dmic_values[] = { 0, 1, 2 }; +static const unsigned int es8316_dmic_values[] = { 0, 2, 3 }; static const struct soc_enum es8316_dmic_src_enum = SOC_VALUE_ENUM_SINGLE(ES8316_ADC_DMIC, 0, 3, ARRAY_SIZE(es8316_dmic_txt),
From: Guiting Shen aarongt.shen@gmail.com
[ Upstream commit f85739c0b2b0d98a32f5ca4fcc5501d2b76df4f6 ]
The 8K sample parameter of 12.288Mhz main system bus clock doesn't work because the I2SC_MR.IMCKDIV must not be 0 according to the sama5d2 series datasheet(I2SC Mode Register of Register Summary).
So use the 6.144Mhz instead of 12.288Mhz to support 8K sample.
Signed-off-by: Guiting Shen aarongt.shen@gmail.com Link: https://lore.kernel.org/r/20230715030620.62328-1-aarongt.shen@gmail.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/atmel/atmel-i2s.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/sound/soc/atmel/atmel-i2s.c b/sound/soc/atmel/atmel-i2s.c index d870f56c44cfc..0341b31197670 100644 --- a/sound/soc/atmel/atmel-i2s.c +++ b/sound/soc/atmel/atmel-i2s.c @@ -163,11 +163,14 @@ struct atmel_i2s_gck_param {
#define I2S_MCK_12M288 12288000UL #define I2S_MCK_11M2896 11289600UL +#define I2S_MCK_6M144 6144000UL
/* mck = (32 * (imckfs+1) / (imckdiv+1)) * fs */ static const struct atmel_i2s_gck_param gck_params[] = { + /* mck = 6.144Mhz */ + { 8000, I2S_MCK_6M144, 1, 47}, /* mck = 768 fs */ + /* mck = 12.288MHz */ - { 8000, I2S_MCK_12M288, 0, 47}, /* mck = 1536 fs */ { 16000, I2S_MCK_12M288, 1, 47}, /* mck = 768 fs */ { 24000, I2S_MCK_12M288, 3, 63}, /* mck = 512 fs */ { 32000, I2S_MCK_12M288, 3, 47}, /* mck = 384 fs */
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit e3ab18de2b09361d6f0e4aafb9cfd6d002ce43a1 ]
On a HP Elite Dragonfly G2 the 0xcc and 0xcd events for SW_TABLET_MODE are only send after the BTNL ACPI method has been called.
Likely more devices need this, so make the BTNL ACPI method unconditional instead of only doing it on devices with a 5 button array.
Note this also makes the intel_button_array_enable() call in probe() unconditional, that function does its own priv->array check. This makes the intel_button_array_enable() call in probe() consistent with the calls done on suspend/resume which also rely on the priv->array check inside the function.
Reported-by: Maxim Mikityanskiy maxtram95@gmail.com Closes: https://lore.kernel.org/platform-driver-x86/20230712175023.31651-1-maxtram95... Signed-off-by: Hans de Goede hdegoede@redhat.com Link: https://lore.kernel.org/r/20230715181516.5173-1-hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/intel-hid.c | 21 +++++++++------------ 1 file changed, 9 insertions(+), 12 deletions(-)
diff --git a/drivers/platform/x86/intel-hid.c b/drivers/platform/x86/intel-hid.c index 164bebbfea214..050f8f7970374 100644 --- a/drivers/platform/x86/intel-hid.c +++ b/drivers/platform/x86/intel-hid.c @@ -449,7 +449,7 @@ static bool button_array_present(struct platform_device *device) static int intel_hid_probe(struct platform_device *device) { acpi_handle handle = ACPI_HANDLE(&device->dev); - unsigned long long mode; + unsigned long long mode, dummy; struct intel_hid_priv *priv; acpi_status status; int err; @@ -501,18 +501,15 @@ static int intel_hid_probe(struct platform_device *device) if (err) goto err_remove_notify;
- if (priv->array) { - unsigned long long dummy; + intel_button_array_enable(&device->dev, true);
- intel_button_array_enable(&device->dev, true); - - /* Call button load method to enable HID power button */ - if (!intel_hid_evaluate_method(handle, INTEL_HID_DSM_BTNL_FN, - &dummy)) { - dev_warn(&device->dev, - "failed to enable HID power button\n"); - } - } + /* + * Call button load method to enable HID power button + * Always do this since it activates events on some devices without + * a button array too. + */ + if (!intel_hid_evaluate_method(handle, INTEL_HID_DSM_BTNL_FN, &dummy)) + dev_warn(&device->dev, "failed to enable HID power button\n");
device_init_wakeup(&device->dev, true); /*
From: Konstantin Shelekhin k.shelekhin@ftml.net
[ Upstream commit c21733754cd6ecbca346f2adf9b17d4cfa50504f ]
Currently huawei-wmi causes a lot of spam in dmesg on my Huawei MateBook X Pro 2022:
... [36409.328463] input input9: Unknown key pressed, code: 0x02c1 [36411.335104] input input9: Unknown key pressed, code: 0x02c1 [36412.338674] input input9: Unknown key pressed, code: 0x02c1 [36414.848564] input input9: Unknown key pressed, code: 0x02c1 [36416.858706] input input9: Unknown key pressed, code: 0x02c1 ...
Fix that by ignoring events generated by ambient light sensor.
This issue was reported on GitHub and resolved with the following merge request:
https://github.com/aymanbagabas/Huawei-WMI/pull/70
I've contacted the mainter of this repo and he gave me the "go ahead" to send this patch to the maling list.
Signed-off-by: Konstantin Shelekhin k.shelekhin@ftml.net Link: https://lore.kernel.org/r/20230722155922.173856-1-k.shelekhin@ftml.net Reviewed-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/huawei-wmi.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/platform/x86/huawei-wmi.c b/drivers/platform/x86/huawei-wmi.c index 195a7f3638cb1..e27f551a9afa4 100644 --- a/drivers/platform/x86/huawei-wmi.c +++ b/drivers/platform/x86/huawei-wmi.c @@ -41,6 +41,8 @@ static const struct key_entry huawei_wmi_keymap[] = { { KE_IGNORE, 0x293, { KEY_KBDILLUMTOGGLE } }, { KE_IGNORE, 0x294, { KEY_KBDILLUMUP } }, { KE_IGNORE, 0x295, { KEY_KBDILLUMUP } }, + // Ignore Ambient Light Sensoring + { KE_KEY, 0x2c1, { KEY_RESERVED } }, { KE_END, 0 } };
From: Christian Göttsche cgzones@googlemail.com
[ Upstream commit 2d7f105edbb3b2be5ffa4d833abbf9b6965e9ce7 ]
If the current task fails the check for the queried capability via `capable(CAP_SYS_ADMIN)` LSMs like SELinux generate a denial message. Issuing such denial messages unnecessarily can lead to a policy author granting more privileges to a subject than needed to silence them.
Reorder CAP_SYS_ADMIN checks after the check whether the operation is actually privileged.
Signed-off-by: Christian Göttsche cgzones@googlemail.com Reviewed-by: Jarkko Sakkinen jarkko@kernel.org Signed-off-by: Jarkko Sakkinen jarkko@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- security/keys/keyctl.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/security/keys/keyctl.c b/security/keys/keyctl.c index edde63a63007f..f42968f349584 100644 --- a/security/keys/keyctl.c +++ b/security/keys/keyctl.c @@ -977,14 +977,19 @@ long keyctl_chown_key(key_serial_t id, uid_t user, gid_t group) ret = -EACCES; down_write(&key->sem);
- if (!capable(CAP_SYS_ADMIN)) { + { + bool is_privileged_op = false; + /* only the sysadmin can chown a key to some other UID */ if (user != (uid_t) -1 && !uid_eq(key->uid, uid)) - goto error_put; + is_privileged_op = true;
/* only the sysadmin can set the key's GID to a group other * than one of those that the current process subscribes to */ if (group != (gid_t) -1 && !gid_eq(gid, key->gid) && !in_group_p(gid)) + is_privileged_op = true; + + if (is_privileged_op && !capable(CAP_SYS_ADMIN)) goto error_put; }
@@ -1084,7 +1089,7 @@ long keyctl_setperm_key(key_serial_t id, key_perm_t perm) down_write(&key->sem);
/* if we're not the sysadmin, we can only change a key that we own */ - if (capable(CAP_SYS_ADMIN) || uid_eq(key->uid, current_fsuid())) { + if (uid_eq(key->uid, current_fsuid()) || capable(CAP_SYS_ADMIN)) { key->perm = perm; ret = 0; }
linux-stable-mirror@lists.linaro.org
-
Sasha Levin