From: Carl Yin(殷张成) carl.yin@quectel.com

commit 33b7af2f459df453feb0d44628d820c47fefe7a8 upstream.

The BG95 modem has 3 USB configurations that are configurable via the AT command AT+QCFGEXT="usbnet",["ecm"|"modem"|"rmnet"] which make the modem enumerate with the following interfaces, respectively:

"modem": Diag + GNSS + Modem + Modem "ecm" : Diag + GNSS + Modem + ECM "rmnet": Diag + GNSS + Modem + QMI Don't support Full QMI messages (e.g WDS_START_NETWORK_INTERFACE)

A detailed description of the USB configuration for each mode follows:

+QCFGEXT: "usbnet","modem" -------------------------- T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0700 Rev= 0.00 S: Manufacturer=Quectel, Incorporated S: Product=Quectel LPWA Module S: SerialNumber=884328a2 C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=fe Prot=ff Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

+QCFGEXT: "usbnet","ecm" ------------------------ T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0700 Rev= 0.00 S: Manufacturer=Quectel, Incorporated S: Product=Quectel LPWA Module S: SerialNumber=884328a2 C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA A: FirstIf#= 3 IfCount= 2 Cls=02(comm.) Sub=00 Prot=00 I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=cdc_ether E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms I: If#= 4 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I:* If#= 4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

+QCFGEXT: "usbnet","rmnet" -------------------------- T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0700 Rev= 0.00 S: Manufacturer=Quectel, Incorporated S: Product=Quectel LPWA Module S: SerialNumber=884328a2 C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms

Signed-off-by: Carl Yin carl.yin@quectel.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold johan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/serial/option.c | 2 ++ 1 file changed, 2 insertions(+)

--- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -1140,6 +1140,8 @@ static const struct usb_device_id option { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_EM12, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, 0x0620, 0xff, 0xff, 0x30) }, /* EM160R-GL */ { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, 0x0620, 0xff, 0, 0) }, + { USB_DEVICE_INTERFACE_CLASS(QUECTEL_VENDOR_ID, 0x0700, 0xff), /* BG95 */ + .driver_info = RSVD(3) | ZLP }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x30) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0, 0) }, { USB_DEVICE_AND_INTERFACE_INFO(QUECTEL_VENDOR_ID, QUECTEL_PRODUCT_RM500Q, 0xff, 0xff, 0x10),

From: Eric W. Biederman ebiederm@xmission.com

commit 4a3d2717d140401df7501a95e454180831a0c5af upstream.

xtensa is the last user of the PT_SINGLESTEP flag. Changing tsk->ptrace in user_enable_single_step and user_disable_single_step without locking could potentiallly cause problems.

So use a thread info flag instead of a flag in tsk->ptrace. Use TIF_SINGLESTEP that xtensa already had defined but unused.

Remove the definitions of PT_SINGLESTEP and PT_BLOCKSTEP as they have no more users.

Cc: stable@vger.kernel.org Acked-by: Max Filippov jcmvbkbc@gmail.com Tested-by: Kees Cook keescook@chromium.org Reviewed-by: Oleg Nesterov oleg@redhat.com Link: https://lkml.kernel.org/r/20220505182645.497868-4-ebiederm@xmission.com Signed-off-by: "Eric W. Biederman" ebiederm@xmission.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/xtensa/kernel/ptrace.c | 4 ++-- arch/xtensa/kernel/signal.c | 4 ++-- include/linux/ptrace.h | 6 ------ 3 files changed, 4 insertions(+), 10 deletions(-)

--- a/arch/xtensa/kernel/ptrace.c +++ b/arch/xtensa/kernel/ptrace.c @@ -35,12 +35,12 @@

void user_enable_single_step(struct task_struct *child) { - child->ptrace |= PT_SINGLESTEP; + set_tsk_thread_flag(child, TIF_SINGLESTEP); }

void user_disable_single_step(struct task_struct *child) { - child->ptrace &= ~PT_SINGLESTEP; + clear_tsk_thread_flag(child, TIF_SINGLESTEP); }

/* --- a/arch/xtensa/kernel/signal.c +++ b/arch/xtensa/kernel/signal.c @@ -459,7 +459,7 @@ static void do_signal(struct pt_regs *re /* Set up the stack frame */ ret = setup_frame(&ksig, sigmask_to_save(), regs); signal_setup_done(ret, &ksig, 0); - if (current->ptrace & PT_SINGLESTEP) + if (test_thread_flag(TIF_SINGLESTEP)) task_pt_regs(current)->icountlevel = 1;

return; @@ -485,7 +485,7 @@ static void do_signal(struct pt_regs *re /* If there's no signal to deliver, we just restore the saved mask. */ restore_saved_sigmask();

- if (current->ptrace & PT_SINGLESTEP) + if (test_thread_flag(TIF_SINGLESTEP)) task_pt_regs(current)->icountlevel = 1; return; } --- a/include/linux/ptrace.h +++ b/include/linux/ptrace.h @@ -40,12 +40,6 @@ extern int ptrace_access_vm(struct task_ #define PT_EXITKILL (PTRACE_O_EXITKILL << PT_OPT_FLAG_SHIFT) #define PT_SUSPEND_SECCOMP (PTRACE_O_SUSPEND_SECCOMP << PT_OPT_FLAG_SHIFT)

-/* single stepping state bits (used on ARM and PA-RISC) */ -#define PT_SINGLESTEP_BIT 31 -#define PT_SINGLESTEP (1<<PT_SINGLESTEP_BIT) -#define PT_BLOCKSTEP_BIT 30 -#define PT_BLOCKSTEP (1<<PT_BLOCKSTEP_BIT) - extern long arch_ptrace(struct task_struct *child, long request, unsigned long addr, unsigned long data); extern int ptrace_readdata(struct task_struct *tsk, unsigned long src, char __user *dst, int len);

From: Qu Wenruo wqu@suse.com

commit d5321a0fa8bc49f11bea0b470800962c17d92d8f upstream.

The following error message lack the "0x" obviously:

cannot mount because of unsupported optional features (4000)

Add the prefix to make it less confusing. This can happen on older kernels that try to mount a filesystem with newer features so it makes sense to backport to older trees.

CC: stable@vger.kernel.org # 4.14+ Reviewed-by: Nikolay Borisov nborisov@suse.com Signed-off-by: Qu Wenruo wqu@suse.com Reviewed-by: David Sterba dsterba@suse.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/btrfs/disk-io.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -2653,7 +2653,7 @@ int open_ctree(struct super_block *sb, ~BTRFS_FEATURE_INCOMPAT_SUPP; if (features) { btrfs_err(fs_info, - "cannot mount because of unsupported optional features (%llx)", + "cannot mount because of unsupported optional features (0x%llx)", features); err = -EINVAL; goto fail_alloc; @@ -2713,7 +2713,7 @@ int open_ctree(struct super_block *sb, ~BTRFS_FEATURE_COMPAT_RO_SUPP; if (!sb_rdonly(sb) && features) { btrfs_err(fs_info, - "cannot mount read-write because of unsupported optional features (%llx)", + "cannot mount read-write because of unsupported optional features (0x%llx)", features); err = -EINVAL; goto fail_alloc;

From: Liu Zixian liuzixian4@huawei.com

[ Upstream commit 194d250cdc4a40ccbd179afd522a9e9846957402 ]

drm_cvt_mode may return NULL and we should check it.

This bug is found by syzkaller:

FAULT_INJECTION stacktrace: [ 168.567394] FAULT_INJECTION: forcing a failure. name failslab, interval 1, probability 0, space 0, times 1 [ 168.567403] CPU: 1 PID: 6425 Comm: syz Kdump: loaded Not tainted 4.19.90-vhulk2201.1.0.h1035.kasan.eulerosv2r10.aarch64 #1 [ 168.567406] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 [ 168.567408] Call trace: [ 168.567414] dump_backtrace+0x0/0x310 [ 168.567418] show_stack+0x28/0x38 [ 168.567423] dump_stack+0xec/0x15c [ 168.567427] should_fail+0x3ac/0x3d0 [ 168.567437] __should_failslab+0xb8/0x120 [ 168.567441] should_failslab+0x28/0xc0 [ 168.567445] kmem_cache_alloc_trace+0x50/0x640 [ 168.567454] drm_mode_create+0x40/0x90 [ 168.567458] drm_cvt_mode+0x48/0xc78 [ 168.567477] virtio_gpu_conn_get_modes+0xa8/0x140 [virtio_gpu] [ 168.567485] drm_helper_probe_single_connector_modes+0x3a4/0xd80 [ 168.567492] drm_mode_getconnector+0x2e0/0xa70 [ 168.567496] drm_ioctl_kernel+0x11c/0x1d8 [ 168.567514] drm_ioctl+0x558/0x6d0 [ 168.567522] do_vfs_ioctl+0x160/0xf30 [ 168.567525] ksys_ioctl+0x98/0xd8 [ 168.567530] __arm64_sys_ioctl+0x50/0xc8 [ 168.567536] el0_svc_common+0xc8/0x320 [ 168.567540] el0_svc_handler+0xf8/0x160 [ 168.567544] el0_svc+0x10/0x218

KASAN stacktrace: [ 168.567561] BUG: KASAN: null-ptr-deref in virtio_gpu_conn_get_modes+0xb4/0x140 [virtio_gpu] [ 168.567565] Read of size 4 at addr 0000000000000054 by task syz/6425 [ 168.567566] [ 168.567571] CPU: 1 PID: 6425 Comm: syz Kdump: loaded Not tainted 4.19.90-vhulk2201.1.0.h1035.kasan.eulerosv2r10.aarch64 #1 [ 168.567573] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015 [ 168.567575] Call trace: [ 168.567578] dump_backtrace+0x0/0x310 [ 168.567582] show_stack+0x28/0x38 [ 168.567586] dump_stack+0xec/0x15c [ 168.567591] kasan_report+0x244/0x2f0 [ 168.567594] __asan_load4+0x58/0xb0 [ 168.567607] virtio_gpu_conn_get_modes+0xb4/0x140 [virtio_gpu] [ 168.567612] drm_helper_probe_single_connector_modes+0x3a4/0xd80 [ 168.567617] drm_mode_getconnector+0x2e0/0xa70 [ 168.567621] drm_ioctl_kernel+0x11c/0x1d8 [ 168.567624] drm_ioctl+0x558/0x6d0 [ 168.567628] do_vfs_ioctl+0x160/0xf30 [ 168.567632] ksys_ioctl+0x98/0xd8 [ 168.567636] __arm64_sys_ioctl+0x50/0xc8 [ 168.567641] el0_svc_common+0xc8/0x320 [ 168.567645] el0_svc_handler+0xf8/0x160 [ 168.567649] el0_svc+0x10/0x218

Signed-off-by: Liu Zixian liuzixian4@huawei.com Link: http://patchwork.freedesktop.org/patch/msgid/20220322091730.1653-1-liuzixian... Signed-off-by: Gerd Hoffmann kraxel@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/virtio/virtgpu_display.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/drivers/gpu/drm/virtio/virtgpu_display.c b/drivers/gpu/drm/virtio/virtgpu_display.c index b6d52055a11f..3a5f73bc2a37 100644 --- a/drivers/gpu/drm/virtio/virtgpu_display.c +++ b/drivers/gpu/drm/virtio/virtgpu_display.c @@ -187,6 +187,8 @@ static int virtio_gpu_conn_get_modes(struct drm_connector *connector) DRM_DEBUG("add mode: %dx%d\n", width, height); mode = drm_cvt_mode(connector->dev, width, height, 60, false, false, false); + if (!mode) + return count; mode->type |= DRM_MODE_TYPE_PREFERRED; drm_mode_probed_add(connector, mode); count++;

From: Haowen Bai baihaowen@meizu.com

[ Upstream commit 3f6b867559b3d43a7ce1b4799b755e812fc0d503 ]

fix warning reported by smatch: drivers/net/wireless/broadcom/b43legacy/phy.c:1181 b43legacy_phy_lo_b_measure() warn: assigning (-772) to unsigned variable 'fval'

Signed-off-by: Haowen Bai baihaowen@meizu.com Signed-off-by: Kalle Valo kvalo@kernel.org Link: https://lore.kernel.org/r/1648203433-8736-1-git-send-email-baihaowen@meizu.c... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/broadcom/b43legacy/phy.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/broadcom/b43legacy/phy.c b/drivers/net/wireless/broadcom/b43legacy/phy.c index 995c7d0c212a..11ee5ee48976 100644 --- a/drivers/net/wireless/broadcom/b43legacy/phy.c +++ b/drivers/net/wireless/broadcom/b43legacy/phy.c @@ -1148,7 +1148,7 @@ void b43legacy_phy_lo_b_measure(struct b43legacy_wldev *dev) struct b43legacy_phy *phy = &dev->phy; u16 regstack[12] = { 0 }; u16 mls; - u16 fval; + s16 fval; int i; int j;

From: Haowen Bai baihaowen@meizu.com

[ Upstream commit e8366bbabe1d207cf7c5b11ae50e223ae6fc278b ]

crypt and crypt->ops could be null, so we need to checking null before dereference

Signed-off-by: Haowen Bai baihaowen@meizu.com Signed-off-by: Kalle Valo kvalo@kernel.org Link: https://lore.kernel.org/r/1648797055-25730-1-git-send-email-baihaowen@meizu.... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/intel/ipw2x00/libipw_tx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/intel/ipw2x00/libipw_tx.c b/drivers/net/wireless/intel/ipw2x00/libipw_tx.c index 84205aa508df..daa4f9eb08ff 100644 --- a/drivers/net/wireless/intel/ipw2x00/libipw_tx.c +++ b/drivers/net/wireless/intel/ipw2x00/libipw_tx.c @@ -397,7 +397,7 @@ netdev_tx_t libipw_xmit(struct sk_buff *skb, struct net_device *dev)

/* Each fragment may need to have room for encryption * pre/postfix */ - if (host_encrypt) + if (host_encrypt && crypt && crypt->ops) bytes_per_frag -= crypt->ops->extra_mpdu_prefix_len + crypt->ops->extra_mpdu_postfix_len;

From: Amadeusz Sławiński amadeuszx.slawinski@linux.intel.com

[ Upstream commit 1b6a6fc5280e97559287b61eade2d4b363e836f2 ]

It is possible when using ASoC that input_dev is unregistered while calling snd_jack_report, which causes NULL pointer dereference. In order to prevent this serialize access to input_dev using mutex lock.

Signed-off-by: Amadeusz Sławiński amadeuszx.slawinski@linux.intel.com Reviewed-by: Cezary Rojewski cezary.rojewski@intel.com Link: https://lore.kernel.org/r/20220412091628.3056922-1-amadeuszx.slawinski@linux... Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- include/sound/jack.h | 1 + sound/core/jack.c | 34 +++++++++++++++++++++++++++------- 2 files changed, 28 insertions(+), 7 deletions(-)

diff --git a/include/sound/jack.h b/include/sound/jack.h index 1e84bfb553cf..4742f842b457 100644 --- a/include/sound/jack.h +++ b/include/sound/jack.h @@ -77,6 +77,7 @@ struct snd_jack { const char *id; #ifdef CONFIG_SND_JACK_INPUT_DEV struct input_dev *input_dev; + struct mutex input_dev_lock; int registered; int type; char name[100]; diff --git a/sound/core/jack.c b/sound/core/jack.c index 36cfe1c54109..d2f9a92453f2 100644 --- a/sound/core/jack.c +++ b/sound/core/jack.c @@ -48,8 +48,11 @@ static int snd_jack_dev_disconnect(struct snd_device *device) #ifdef CONFIG_SND_JACK_INPUT_DEV struct snd_jack *jack = device->device_data;

- if (!jack->input_dev) + mutex_lock(&jack->input_dev_lock); + if (!jack->input_dev) { + mutex_unlock(&jack->input_dev_lock); return 0; + }

/* If the input device is registered with the input subsystem * then we need to use a different deallocator. */ @@ -58,6 +61,7 @@ static int snd_jack_dev_disconnect(struct snd_device *device) else input_free_device(jack->input_dev); jack->input_dev = NULL; + mutex_unlock(&jack->input_dev_lock); #endif /* CONFIG_SND_JACK_INPUT_DEV */ return 0; } @@ -96,8 +100,11 @@ static int snd_jack_dev_register(struct snd_device *device) snprintf(jack->name, sizeof(jack->name), "%s %s", card->shortname, jack->id);

- if (!jack->input_dev) + mutex_lock(&jack->input_dev_lock); + if (!jack->input_dev) { + mutex_unlock(&jack->input_dev_lock); return 0; + }

jack->input_dev->name = jack->name;

@@ -122,6 +129,7 @@ static int snd_jack_dev_register(struct snd_device *device) if (err == 0) jack->registered = 1;

+ mutex_unlock(&jack->input_dev_lock); return err; } #endif /* CONFIG_SND_JACK_INPUT_DEV */ @@ -242,9 +250,11 @@ int snd_jack_new(struct snd_card *card, const char *id, int type, return -ENOMEM; }

- /* don't creat input device for phantom jack */ - if (!phantom_jack) { #ifdef CONFIG_SND_JACK_INPUT_DEV + mutex_init(&jack->input_dev_lock); + + /* don't create input device for phantom jack */ + if (!phantom_jack) { int i;

jack->input_dev = input_allocate_device(); @@ -262,8 +272,8 @@ int snd_jack_new(struct snd_card *card, const char *id, int type, input_set_capability(jack->input_dev, EV_SW, jack_switch_types[i]);

-#endif /* CONFIG_SND_JACK_INPUT_DEV */ } +#endif /* CONFIG_SND_JACK_INPUT_DEV */

err = snd_device_new(card, SNDRV_DEV_JACK, jack, &ops); if (err < 0) @@ -303,10 +313,14 @@ EXPORT_SYMBOL(snd_jack_new); void snd_jack_set_parent(struct snd_jack *jack, struct device *parent) { WARN_ON(jack->registered); - if (!jack->input_dev) + mutex_lock(&jack->input_dev_lock); + if (!jack->input_dev) { + mutex_unlock(&jack->input_dev_lock); return; + }

jack->input_dev->dev.parent = parent; + mutex_unlock(&jack->input_dev_lock); } EXPORT_SYMBOL(snd_jack_set_parent);

@@ -354,6 +368,8 @@ EXPORT_SYMBOL(snd_jack_set_key);

/** * snd_jack_report - Report the current status of a jack + * Note: This function uses mutexes and should be called from a + * context which can sleep (such as a workqueue). * * @jack: The jack to report status for * @status: The current status of the jack @@ -373,8 +389,11 @@ void snd_jack_report(struct snd_jack *jack, int status) status & jack_kctl->mask_bits);

#ifdef CONFIG_SND_JACK_INPUT_DEV - if (!jack->input_dev) + mutex_lock(&jack->input_dev_lock); + if (!jack->input_dev) { + mutex_unlock(&jack->input_dev_lock); return; + }

for (i = 0; i < ARRAY_SIZE(jack->key); i++) { int testbit = SND_JACK_BTN_0 >> i; @@ -393,6 +412,7 @@ void snd_jack_report(struct snd_jack *jack, int status) }

input_sync(jack->input_dev); + mutex_unlock(&jack->input_dev_lock); #endif /* CONFIG_SND_JACK_INPUT_DEV */ } EXPORT_SYMBOL(snd_jack_report);

From: Thibaut VARÈNE hacks+kernel@slashdirt.org

[ Upstream commit e999a5da28a0e0f7de242d841ef7d5e48f4646ae ]

This patch fixes an invalid TX PA DC bias level on QCA9561, which results in a very low output power and very low throughput as devices are further away from the AP (compared to other 2.4GHz APs).

This patch was suggested by Felix Fietkau, who noted[1]: "The value written to that register is wrong, because while the mask definition AR_CH0_TOP2_XPABIASLVL uses a different value for 9561, the shift definition AR_CH0_TOP2_XPABIASLVL_S is hardcoded to 12, which is wrong for 9561."

In real life testing, without this patch the 2.4GHz throughput on Yuncore XD3200 is around 10Mbps sitting next to the AP, and closer to practical maximum with the patch applied.

[1] https://lore.kernel.org/all/91c58969-c60e-2f41-00ac-737786d435ae@nbd.name

Signed-off-by: Thibaut VARÈNE hacks+kernel@slashdirt.org Acked-by: Felix Fietkau nbd@nbd.name Acked-by: Toke Høiland-Jørgensen toke@toke.dk Signed-off-by: Kalle Valo quic_kvalo@quicinc.com Link: https://lore.kernel.org/r/20220417145145.1847-1-hacks+kernel@slashdirt.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/ath/ath9k/ar9003_phy.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.h b/drivers/net/wireless/ath/ath9k/ar9003_phy.h index a171dbb29fbb..ad949eb02f3d 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.h +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.h @@ -720,7 +720,7 @@ #define AR_CH0_TOP2 (AR_SREV_9300(ah) ? 0x1628c : \ (AR_SREV_9462(ah) ? 0x16290 : 0x16284)) #define AR_CH0_TOP2_XPABIASLVL (AR_SREV_9561(ah) ? 0x1e00 : 0xf000) -#define AR_CH0_TOP2_XPABIASLVL_S 12 +#define AR_CH0_TOP2_XPABIASLVL_S (AR_SREV_9561(ah) ? 9 : 12)

#define AR_CH0_XTAL (AR_SREV_9300(ah) ? 0x16294 : \ ((AR_SREV_9462(ah) || AR_SREV_9565(ah)) ? 0x16298 : \

From: Zheyu Ma zheyuma97@gmail.com

[ Upstream commit e8123311cf06d7dae71e8c5fe78e0510d20cd30b ]

When the driver fails to call the dma_set_mask(), the driver will get the following splat:

[ 55.853884] BUG: KASAN: use-after-free in __process_removed_driver+0x3c/0x240 [ 55.854486] Read of size 8 at addr ffff88810de60408 by task modprobe/590 [ 55.856822] Call Trace: [ 55.860327] __process_removed_driver+0x3c/0x240 [ 55.861347] bus_for_each_dev+0x102/0x160 [ 55.861681] i2c_del_driver+0x2f/0x50

This is because the driver has initialized the i2c related resources in cx23885_dev_setup() but not released them in error handling, fix this bug by modifying the error path that jumps after failing to call the dma_set_mask().

Signed-off-by: Zheyu Ma zheyuma97@gmail.com Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Mauro Carvalho Chehab mchehab@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/pci/cx23885/cx23885-core.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/media/pci/cx23885/cx23885-core.c b/drivers/media/pci/cx23885/cx23885-core.c index 4612f26fcd6d..6f297caf5540 100644 --- a/drivers/media/pci/cx23885/cx23885-core.c +++ b/drivers/media/pci/cx23885/cx23885-core.c @@ -2005,7 +2005,7 @@ static int cx23885_initdev(struct pci_dev *pci_dev, err = pci_set_dma_mask(pci_dev, 0xffffffff); if (err) { pr_err("%s/0: Oops: no 32bit PCI DMA ???\n", dev->name); - goto fail_ctrl; + goto fail_dma_set_mask; }

err = request_irq(pci_dev->irq, cx23885_irq, @@ -2013,7 +2013,7 @@ static int cx23885_initdev(struct pci_dev *pci_dev, if (err < 0) { pr_err("%s: can't get IRQ %d\n", dev->name, pci_dev->irq); - goto fail_irq; + goto fail_dma_set_mask; }

switch (dev->board) { @@ -2035,7 +2035,7 @@ static int cx23885_initdev(struct pci_dev *pci_dev,

return 0;

-fail_irq: +fail_dma_set_mask: cx23885_dev_unregister(dev); fail_ctrl: v4l2_ctrl_handler_free(hdl);

From: Lv Ruyi lv.ruyi@zte.com.cn

[ Upstream commit c5acd61dbb32b6bda0f3a354108f2b8dcb788985 ]

If major equals 0, register_chrdev() returns an error code when it fails. This function dynamically allocates a major and returns its number on success, so we should use "< 0" to check it instead of "!".

Link: https://lore.kernel.org/r/20220418105755.2558828-1-lv.ruyi@zte.com.cn Reported-by: Zeal Robot zealci@zte.com.cn Signed-off-by: Lv Ruyi lv.ruyi@zte.com.cn Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/megaraid.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/megaraid.c b/drivers/scsi/megaraid.c index f5c09bbf9374..eed6d45b8025 100644 --- a/drivers/scsi/megaraid.c +++ b/drivers/scsi/megaraid.c @@ -4707,7 +4707,7 @@ static int __init megaraid_init(void) * major number allocation. */ major = register_chrdev(0, "megadev_legacy", &megadev_fops); - if (!major) { + if (major < 0) { printk(KERN_WARNING "megaraid: failed to register char device\n"); }

From: jianghaoran jianghaoran@kylinos.cn

[ Upstream commit b52e1cce31ca721e937d517411179f9196ee6135 ]

ARPHRD_TUNNEL interface can't process rs packets and will generate TX errors

ex: ip tunnel add ethn mode ipip local 192.168.1.1 remote 192.168.1.2 ifconfig ethn x.x.x.x

ethn: flags=209<UP,POINTOPOINT,RUNNING,NOARP> mtu 1480 inet x.x.x.x netmask 255.255.255.255 destination x.x.x.x inet6 fe80::5efe:ac1e:3cdb prefixlen 64 scopeid 0x20<link> tunnel txqueuelen 1000 (IPIP Tunnel) RX packets 0 bytes 0 (0.0 B) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 0 bytes 0 (0.0 B) TX errors 3 dropped 0 overruns 0 carrier 0 collisions 0

Signed-off-by: jianghaoran jianghaoran@kylinos.cn Link: https://lore.kernel.org/r/20220429053802.246681-1-jianghaoran@kylinos.cn Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/ipv6/addrconf.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index 09807202bd1c..0d3e76b160a5 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -4058,7 +4058,8 @@ static void addrconf_dad_completed(struct inet6_ifaddr *ifp, bool bump_id, send_rs = send_mld && ipv6_accept_ra(ifp->idev) && ifp->idev->cnf.rtr_solicits != 0 && - (dev->flags&IFF_LOOPBACK) == 0; + (dev->flags & IFF_LOOPBACK) == 0 && + (dev->type != ARPHRD_TUNNEL); read_unlock_bh(&ifp->idev->lock);

/* While dad is in progress mld report's source address is in6_addrany.

From: Heiko Carstens hca@linux.ibm.com

[ Upstream commit 63678eecec57fc51b778be3da35a397931287170 ]

gcc 12 does not (always) optimize away code that should only be generated if parameters are constant and within in a certain range. This depends on various obscure kernel config options, however in particular PROFILE_ALL_BRANCHES can trigger this compile error:

In function ‘__atomic_add_const’, inlined from ‘__preempt_count_add.part.0’ at ./arch/s390/include/asm/preempt.h:50:3: ./arch/s390/include/asm/atomic_ops.h:80:9: error: impossible constraint in ‘asm’ 80 | asm volatile( \ | ^~~

Workaround this by simply disabling the optimization for PROFILE_ALL_BRANCHES, since the kernel will be so slow, that this optimization won't matter at all.

Reported-by: Thomas Richter tmricht@linux.ibm.com Reviewed-by: Sven Schnelle svens@linux.ibm.com Signed-off-by: Heiko Carstens hca@linux.ibm.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/s390/include/asm/preempt.h | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-)

diff --git a/arch/s390/include/asm/preempt.h b/arch/s390/include/asm/preempt.h index 23a14d187fb1..1aebf09fbcd8 100644 --- a/arch/s390/include/asm/preempt.h +++ b/arch/s390/include/asm/preempt.h @@ -50,10 +50,17 @@ static inline bool test_preempt_need_resched(void)

static inline void __preempt_count_add(int val) { - if (__builtin_constant_p(val) && (val >= -128) && (val <= 127)) - __atomic_add_const(val, &S390_lowcore.preempt_count); - else - __atomic_add(val, &S390_lowcore.preempt_count); + /* + * With some obscure config options and CONFIG_PROFILE_ALL_BRANCHES + * enabled, gcc 12 fails to handle __builtin_constant_p(). + */ + if (!IS_ENABLED(CONFIG_PROFILE_ALL_BRANCHES)) { + if (__builtin_constant_p(val) && (val >= -128) && (val <= 127)) { + __atomic_add_const(val, &S390_lowcore.preempt_count); + return; + } + } + __atomic_add(val, &S390_lowcore.preempt_count); }

static inline void __preempt_count_sub(int val)

From: Corey Minyard cminyard@mvista.com

[ Upstream commit 7602b957e2404e5f98d9a40b68f1fd27f0028712 ]

Even though it's not possible to get into the SSIF_GETTING_MESSAGES and SSIF_GETTING_EVENTS states without a valid message in the msg field, it's probably best to be defensive here and check and print a log, since that means something else went wrong.

Also add a default clause to that switch statement to release the lock and print a log, in case the state variable gets messed up somehow.

Reported-by: Haowen Bai baihaowen@meizu.com Signed-off-by: Corey Minyard cminyard@mvista.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/char/ipmi/ipmi_ssif.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+)

diff --git a/drivers/char/ipmi/ipmi_ssif.c b/drivers/char/ipmi/ipmi_ssif.c index cf87bfe971e6..171c54c86356 100644 --- a/drivers/char/ipmi/ipmi_ssif.c +++ b/drivers/char/ipmi/ipmi_ssif.c @@ -816,6 +816,14 @@ static void msg_done_handler(struct ssif_info *ssif_info, int result, break;

case SSIF_GETTING_EVENTS: + if (!msg) { + /* Should never happen, but just in case. */ + dev_warn(&ssif_info->client->dev, + "No message set while getting events\n"); + ipmi_ssif_unlock_cond(ssif_info, flags); + break; + } + if ((result < 0) || (len < 3) || (msg->rsp[2] != 0)) { /* Error getting event, probably done. */ msg->done(msg); @@ -839,6 +847,14 @@ static void msg_done_handler(struct ssif_info *ssif_info, int result, break;

case SSIF_GETTING_MESSAGES: + if (!msg) { + /* Should never happen, but just in case. */ + dev_warn(&ssif_info->client->dev, + "No message set while getting messages\n"); + ipmi_ssif_unlock_cond(ssif_info, flags); + break; + } + if ((result < 0) || (len < 3) || (msg->rsp[2] != 0)) { /* Error getting event, probably done. */ msg->done(msg); @@ -861,6 +877,13 @@ static void msg_done_handler(struct ssif_info *ssif_info, int result, deliver_recv_msg(ssif_info, msg); } break; + + default: + /* Should never happen, but just in case. */ + dev_warn(&ssif_info->client->dev, + "Invalid state in message done handling: %d\n", + ssif_info->ssif_state); + ipmi_ssif_unlock_cond(ssif_info, flags); }

flags = ipmi_ssif_lock_cond(ssif_info, &oflags);

From: Jason A. Donenfeld Jason@zx2c4.com

[ Upstream commit 516dd4aacd67a0f27da94f3fe63fe0f4dbab6e2b ]

In order to measure the boot process, the timer should be switched on as early in boot as possible. As well, the commit defines the get_cycles macro, like the previous patches in this series, so that generic code is aware that it's implemented by the platform, as is done on other archs.

Cc: Thomas Gleixner tglx@linutronix.de Cc: Arnd Bergmann arnd@arndb.de Cc: Jonas Bonn jonas@southpole.se Cc: Stefan Kristiansson stefan.kristiansson@saunalahti.fi Acked-by: Stafford Horne shorne@gmail.com Reported-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Jason A. Donenfeld Jason@zx2c4.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/openrisc/include/asm/timex.h | 1 + arch/openrisc/kernel/head.S | 9 +++++++++ 2 files changed, 10 insertions(+)

diff --git a/arch/openrisc/include/asm/timex.h b/arch/openrisc/include/asm/timex.h index 9935cad1b9b9..34d015bf0462 100644 --- a/arch/openrisc/include/asm/timex.h +++ b/arch/openrisc/include/asm/timex.h @@ -27,6 +27,7 @@ static inline cycles_t get_cycles(void) { return mfspr(SPR_TTCR); } +#define get_cycles get_cycles

/* This isn't really used any more */ #define CLOCK_TICK_RATE 1000 diff --git a/arch/openrisc/kernel/head.S b/arch/openrisc/kernel/head.S index 4d878d13b860..3f1e9d168710 100644 --- a/arch/openrisc/kernel/head.S +++ b/arch/openrisc/kernel/head.S @@ -459,6 +459,15 @@ _start: l.ori r3,r0,0x1 l.mtspr r0,r3,SPR_SR

+ /* + * Start the TTCR as early as possible, so that the RNG can make use of + * measurements of boot time from the earliest opportunity. Especially + * important is that the TTCR does not return zero by the time we reach + * rand_initialize(). + */ + l.movhi r3,hi(SPR_TTMR_CR) + l.mtspr r0,r3,SPR_TTMR + CLEAR_GPR(r1) CLEAR_GPR(r2) CLEAR_GPR(r3)

From: Lin Ma linma@zju.edu.cn

[ Upstream commit 2def44d3aec59e38d2701c568d65540783f90f2f ]

There is a logic error when removing rt5645 device as the function rt5645_i2c_remove() first cancel the &rt5645->jack_detect_work and delete the &rt5645->btn_check_timer latter. However, since the timer handler rt5645_btn_check_callback() will re-queue the jack_detect_work, this cleanup order is buggy.

That is, once the del_timer_sync in rt5645_i2c_remove is concurrently run with the rt5645_btn_check_callback, the canceled jack_detect_work will be rescheduled again, leading to possible use-after-free.

This patch fix the issue by placing the del_timer_sync function before the cancel_delayed_work_sync.

Signed-off-by: Lin Ma linma@zju.edu.cn Link: https://lore.kernel.org/r/20220516092035.28283-1-linma@zju.edu.cn Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/rt5645.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)

diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c index a98647ac497c..01de25813c72 100644 --- a/sound/soc/codecs/rt5645.c +++ b/sound/soc/codecs/rt5645.c @@ -3972,9 +3972,14 @@ static int rt5645_i2c_remove(struct i2c_client *i2c) if (i2c->irq) free_irq(i2c->irq, rt5645);

+ /* + * Since the rt5645_btn_check_callback() can queue jack_detect_work, + * the timer need to be delted first + */ + del_timer_sync(&rt5645->btn_check_timer); + cancel_delayed_work_sync(&rt5645->jack_detect_work); cancel_delayed_work_sync(&rt5645->rcclock_work); - del_timer_sync(&rt5645->btn_check_timer);

snd_soc_unregister_codec(&i2c->dev); regulator_bulk_disable(ARRAY_SIZE(rt5645->supplies), rt5645->supplies);

From: Kwanghoon Son k.son@samsung.com

[ Upstream commit e080f5c1f2b6d02c02ee5d674e0e392ccf63bbaf ]

Declare static on function 'fimc_isp_video_device_unregister'.

When VIDEO_EXYNOS4_ISP_DMA_CAPTURE=n, compiler warns about warning: no previous prototype for function [-Wmissing-prototypes]

Reported-by: kernel test robot lkp@intel.com Signed-off-by: Kwanghoon Son k.son@samsung.com Signed-off-by: Sakari Ailus sakari.ailus@linux.intel.com Signed-off-by: Mauro Carvalho Chehab mchehab@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/platform/exynos4-is/fimc-isp-video.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/media/platform/exynos4-is/fimc-isp-video.h b/drivers/media/platform/exynos4-is/fimc-isp-video.h index f79a1b348aa6..67ef85249912 100644 --- a/drivers/media/platform/exynos4-is/fimc-isp-video.h +++ b/drivers/media/platform/exynos4-is/fimc-isp-video.h @@ -35,7 +35,7 @@ static inline int fimc_isp_video_device_register(struct fimc_isp *isp, return 0; }

-void fimc_isp_video_device_unregister(struct fimc_isp *isp, +static inline void fimc_isp_video_device_unregister(struct fimc_isp *isp, enum v4l2_buf_type type) { }

From: Jakub Kicinski kuba@kernel.org

[ Upstream commit 9dec850fd7c210a04b4707df8e6c95bfafdd6a4b ]

GCC 12 currently generates a rather inconsistent warning:

drivers/net/ethernet/broadcom/tg3.c:17795:51: warning: array subscript 5 is above array bounds of ‘struct tg3_napi[5]’ [-Warray-bounds] 17795 | struct tg3_napi *tnapi = &tp->napi[i]; | ~~~~~~~~^~~

i is guaranteed < tp->irq_max which in turn is either 1 or 5. There are more loops like this one in the driver, but strangely GCC 12 dislikes only this single one.

Silence this silliness for now.

Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/broadcom/Makefile | 5 +++++ 1 file changed, 5 insertions(+)

diff --git a/drivers/net/ethernet/broadcom/Makefile b/drivers/net/ethernet/broadcom/Makefile index 7046ad6d3d0e..ac50da49ca77 100644 --- a/drivers/net/ethernet/broadcom/Makefile +++ b/drivers/net/ethernet/broadcom/Makefile @@ -16,3 +16,8 @@ obj-$(CONFIG_BGMAC_BCMA) += bgmac-bcma.o bgmac-bcma-mdio.o obj-$(CONFIG_BGMAC_PLATFORM) += bgmac-platform.o obj-$(CONFIG_SYSTEMPORT) += bcmsysport.o obj-$(CONFIG_BNXT) += bnxt/ + +# FIXME: temporarily silence -Warray-bounds on non W=1+ builds +ifndef KBUILD_EXTRA_WARN +CFLAGS_tg3.o += -Wno-array-bounds +endif

From: Zixuan Fu r33s3n6@gmail.com

[ Upstream commit 0d4837fdb796f99369cf7691d33de1b856bcaf1f ]

In our fault-injection testing, the variable "nblocks" in dbFree() can be zero when kmalloc_array() fails in dtSearch(). In this case, the variable "mp" in dbFree() would be NULL and then it is dereferenced in "write_metapage(mp)".

The failure log is listed as follows:

[ 13.824137] BUG: kernel NULL pointer dereference, address: 0000000000000020 ... [ 13.827416] RIP: 0010:dbFree+0x5f7/0x910 [jfs] [ 13.834341] Call Trace: [ 13.834540] <TASK> [ 13.834713] txFreeMap+0x7b4/0xb10 [jfs] [ 13.835038] txUpdateMap+0x311/0x650 [jfs] [ 13.835375] jfs_lazycommit+0x5f2/0xc70 [jfs] [ 13.835726] ? sched_dynamic_update+0x1b0/0x1b0 [ 13.836092] kthread+0x3c2/0x4a0 [ 13.836355] ? txLockFree+0x160/0x160 [jfs] [ 13.836763] ? kthread_unuse_mm+0x160/0x160 [ 13.837106] ret_from_fork+0x1f/0x30 [ 13.837402] </TASK> ...

This patch adds a NULL check of "mp" before "write_metapage(mp)" is called.

Reported-by: TOTE Robot oslab@tsinghua.edu.cn Signed-off-by: Zixuan Fu r33s3n6@gmail.com Signed-off-by: Dave Kleikamp dave.kleikamp@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/jfs/jfs_dmap.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/fs/jfs/jfs_dmap.c b/fs/jfs/jfs_dmap.c index 6dac48e29d28..a07fbb60ac3c 100644 --- a/fs/jfs/jfs_dmap.c +++ b/fs/jfs/jfs_dmap.c @@ -398,7 +398,8 @@ int dbFree(struct inode *ip, s64 blkno, s64 nblocks) }

/* write the last buffer. */ - write_metapage(mp); + if (mp) + write_metapage(mp);

IREAD_UNLOCK(ipbmap);

From: OGAWA Hirofumi hirofumi@mail.parknet.co.jp

[ Upstream commit 183c3237c928109d2008c0456dff508baf692b20 ]

fat*_ent_bread() can be the cause of too many report on I/O error path. So use fat_msg_ratelimit() instead.

Link: https://lkml.kernel.org/r/87bkxogfeq.fsf@mail.parknet.co.jp Signed-off-by: OGAWA Hirofumi hirofumi@mail.parknet.co.jp Reported-by: qianfan qianfanguijin@163.com Tested-by: qianfan qianfanguijin@163.com Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/fat/fatent.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/fs/fat/fatent.c b/fs/fat/fatent.c index 24ed1f4e48ae..3ef3e773da1b 100644 --- a/fs/fat/fatent.c +++ b/fs/fat/fatent.c @@ -92,7 +92,8 @@ static int fat12_ent_bread(struct super_block *sb, struct fat_entry *fatent, err_brelse: brelse(bhs[0]); err: - fat_msg(sb, KERN_ERR, "FAT read failed (blocknr %llu)", (llu)blocknr); + fat_msg_ratelimit(sb, KERN_ERR, "FAT read failed (blocknr %llu)", + (llu)blocknr); return -EIO; }

@@ -105,8 +106,8 @@ static int fat_ent_bread(struct super_block *sb, struct fat_entry *fatent, fatent->fat_inode = MSDOS_SB(sb)->fat_inode; fatent->bhs[0] = sb_bread(sb, blocknr); if (!fatent->bhs[0]) { - fat_msg(sb, KERN_ERR, "FAT read failed (blocknr %llu)", - (llu)blocknr); + fat_msg_ratelimit(sb, KERN_ERR, "FAT read failed (blocknr %llu)", + (llu)blocknr); return -EIO; } fatent->nr_bhs = 1;

From: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org

[ Upstream commit f038e8186fbc5723d7d38c6fa1d342945107347e ]

The Samsung s524ad0xd1 EEPROM should use atmel,24c128 fallback, according to the AT24 EEPROM bindings.

Reported-by: Rob Herring robh@kernel.org Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org Link: https://lore.kernel.org/r/20220426183443.243113-1-krzysztof.kozlowski@linaro... Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/exynos5250-smdk5250.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index a3c4b9e03fbf..dc539a4eb27a 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -128,7 +128,7 @@ samsung,i2c-max-bus-freq = <20000>;

eeprom@50 { - compatible = "samsung,s524ad0xd1"; + compatible = "samsung,s524ad0xd1", "atmel,24c128"; reg = <0x50>; };

@@ -287,7 +287,7 @@ samsung,i2c-max-bus-freq = <20000>;

eeprom@51 { - compatible = "samsung,s524ad0xd1"; + compatible = "samsung,s524ad0xd1", "atmel,24c128"; reg = <0x51>; };

From: Yicong Yang yangyicong@hisilicon.com

[ Upstream commit a91ee0e9fca9d7501286cfbced9b30a33e52740a ]

The sysfs sriov_numvfs_store() path acquires the device lock before the config space access lock:

sriov_numvfs_store device_lock # A (1) acquire device lock sriov_configure vfio_pci_sriov_configure # (for example) vfio_pci_core_sriov_configure pci_disable_sriov sriov_disable pci_cfg_access_lock pci_wait_cfg # B (4) wait for dev->block_cfg_access == 0

Previously, pci_dev_lock() acquired the config space access lock before the device lock:

pci_dev_lock pci_cfg_access_lock dev->block_cfg_access = 1 # B (2) set dev->block_cfg_access = 1 device_lock # A (3) wait for device lock

Any path that uses pci_dev_lock(), e.g., pci_reset_function(), may deadlock with sriov_numvfs_store() if the operations occur in the sequence (1) (2) (3) (4).

Avoid the deadlock by reversing the order in pci_dev_lock() so it acquires the device lock before the config space access lock, the same as the sriov_numvfs_store() path.

[bhelgaas: combined and adapted commit log from Jay Zhou's independent subsequent posting: https://lore.kernel.org/r/20220404062539.1710-1-jianjay.zhou@huawei.com] Link: https://lore.kernel.org/linux-pci/1583489997-17156-1-git-send-email-yangyico... Also-posted-by: Jay Zhou jianjay.zhou@huawei.com Signed-off-by: Yicong Yang yangyicong@hisilicon.com Signed-off-by: Bjorn Helgaas bhelgaas@google.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/pci.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 4ff7f2575d28..efcd06064953 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -4153,18 +4153,18 @@ static int pci_dev_reset_slot_function(struct pci_dev *dev, int probe)

static void pci_dev_lock(struct pci_dev *dev) { - pci_cfg_access_lock(dev); /* block PM suspend, driver probe, etc. */ device_lock(&dev->dev); + pci_cfg_access_lock(dev); }

/* Return 1 on successful lock, 0 on contention */ static int pci_dev_trylock(struct pci_dev *dev) { - if (pci_cfg_access_trylock(dev)) { - if (device_trylock(&dev->dev)) + if (device_trylock(&dev->dev)) { + if (pci_cfg_access_trylock(dev)) return 1; - pci_cfg_access_unlock(dev); + device_unlock(&dev->dev); }

return 0; @@ -4172,8 +4172,8 @@ static int pci_dev_trylock(struct pci_dev *dev)

static void pci_dev_unlock(struct pci_dev *dev) { - device_unlock(&dev->dev); pci_cfg_access_unlock(dev); + device_unlock(&dev->dev); }

static void pci_dev_save_and_disable(struct pci_dev *dev)

From: Lv Ruyi lv.ruyi@zte.com.cn

[ Upstream commit 5dd9e27ea4a39f7edd4bf81e9e70208e7ac0b7c9 ]

The of_find_compatible_node() function returns a node pointer with refcount incremented, use of_node_put() on it when done.

Reported-by: Zeal Robot zealci@zte.com.cn Signed-off-by: Lv Ruyi lv.ruyi@zte.com.cn Signed-off-by: Michael Ellerman mpe@ellerman.id.au Link: https://lore.kernel.org/r/20220402013419.2410298-1-lv.ruyi@zte.com.cn Signed-off-by: Sasha Levin sashal@kernel.org --- arch/powerpc/sysdev/xics/icp-opal.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/arch/powerpc/sysdev/xics/icp-opal.c b/arch/powerpc/sysdev/xics/icp-opal.c index c71d2ea42627..3c9dd871491e 100644 --- a/arch/powerpc/sysdev/xics/icp-opal.c +++ b/arch/powerpc/sysdev/xics/icp-opal.c @@ -199,6 +199,7 @@ int icp_opal_init(void)

printk("XICS: Using OPAL ICP fallbacks\n");

+ of_node_put(np); return 0; }

From: Douglas Miller doug.miller@cornelisnetworks.com

[ Upstream commit 629e052d0c98e46dde9f0824f0aa437f678d9b8f ]

If the hfi1 module is loaded with HFI1_CAP_SDMA off, a call to hfi1_write_iter() will dereference a NULL pointer and panic. A typical stack frame is:

sdma_select_user_engine [hfi1] hfi1_user_sdma_process_request [hfi1] hfi1_write_iter [hfi1] do_iter_readv_writev do_iter_write vfs_writev do_writev do_syscall_64

The fix is to test for SDMA in hfi1_write_iter() and fail the I/O with EINVAL.

Link: https://lore.kernel.org/r/20220520183706.48973.79803.stgit@awfm-01.cornelisn... Signed-off-by: Douglas Miller doug.miller@cornelisnetworks.com Signed-off-by: Dennis Dalessandro dennis.dalessandro@cornelisnetworks.com Signed-off-by: Jason Gunthorpe jgg@nvidia.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/infiniband/hw/hfi1/file_ops.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/drivers/infiniband/hw/hfi1/file_ops.c b/drivers/infiniband/hw/hfi1/file_ops.c index b3ab803bf8b1..7b8644610feb 100644 --- a/drivers/infiniband/hw/hfi1/file_ops.c +++ b/drivers/infiniband/hw/hfi1/file_ops.c @@ -424,6 +424,8 @@ static ssize_t hfi1_write_iter(struct kiocb *kiocb, struct iov_iter *from) unsigned long dim = from->nr_segs; int idx;

+ if (!HFI1_CAP_IS_KSET(SDMA)) + return -EINVAL; idx = srcu_read_lock(&fd->pq_srcu); pq = srcu_dereference(fd->pq, &fd->pq_srcu); if (!cq || !pq) {

From: Wenli Looi wlooi@ucalgary.ca

[ Upstream commit 9aaff3864b603408c02c629957ae8d8ff5d5a4f2 ]

The current implementation is reading the wrong eeprom type.

Fixes: d8ec2e2a63e8 ("ath9k: Add an eeprom_ops callback for retrieving the eepmisc value") Signed-off-by: Wenli Looi wlooi@ucalgary.ca Acked-by: Toke Høiland-Jørgensen toke@toke.dk Signed-off-by: Kalle Valo quic_kvalo@quicinc.com Link: https://lore.kernel.org/r/20220320233010.123106-5-wlooi@ucalgary.ca Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/ath/ath9k/ar9003_eeprom.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c index 694a58b1e995..bdbe0427b90e 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c @@ -5501,7 +5501,7 @@ unsigned int ar9003_get_paprd_scale_factor(struct ath_hw *ah,

static u8 ar9003_get_eepmisc(struct ath_hw *ah) { - return ah->eeprom.map4k.baseEepHeader.eepMisc; + return ah->eeprom.ar9300_eep.baseEepHeader.opCapFlags.eepMisc; }

const struct eeprom_ops eep_ar9300_ops = {

From: Miaoqian Lin linmq006@gmail.com

[ Upstream commit 05654431a18fe24e5e46a375d98904134628a102 ]

This node pointer is returned by of_parse_phandle() with refcount incremented in this function. Calling of_node_put() to avoid the refcount leak.

Fixes: 8625c1dbd876 ("ASoC: mediatek: Add mt2701-wm8960 machine driver") Signed-off-by: Miaoqian Lin linmq006@gmail.com Link: https://lore.kernel.org/r/20220404093526.30004-1-linmq006@gmail.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/mediatek/mt2701/mt2701-wm8960.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)

diff --git a/sound/soc/mediatek/mt2701/mt2701-wm8960.c b/sound/soc/mediatek/mt2701/mt2701-wm8960.c index a08ce2323bdc..3db92506ccea 100644 --- a/sound/soc/mediatek/mt2701/mt2701-wm8960.c +++ b/sound/soc/mediatek/mt2701/mt2701-wm8960.c @@ -126,7 +126,8 @@ static int mt2701_wm8960_machine_probe(struct platform_device *pdev) if (!codec_node) { dev_err(&pdev->dev, "Property 'audio-codec' missing or invalid\n"); - return -EINVAL; + ret = -EINVAL; + goto put_platform_node; } for (i = 0; i < card->num_links; i++) { if (mt2701_wm8960_dai_links[i].codec_name) @@ -137,7 +138,7 @@ static int mt2701_wm8960_machine_probe(struct platform_device *pdev) ret = snd_soc_of_parse_audio_routing(card, "audio-routing"); if (ret) { dev_err(&pdev->dev, "failed to parse audio-routing: %d\n", ret); - return ret; + goto put_codec_node; }

ret = devm_snd_soc_register_card(&pdev->dev, card); @@ -145,6 +146,10 @@ static int mt2701_wm8960_machine_probe(struct platform_device *pdev) dev_err(&pdev->dev, "%s snd_soc_register_card fail %d\n", __func__, ret);

+put_codec_node: + of_node_put(codec_node); +put_platform_node: + of_node_put(platform_node); return ret; }

From: Miles Chen miles.chen@mediatek.com

[ Upstream commit 2c5d69b0a141e1e98febe3111e6f4fd8420493a5 ]

In current implementation, mtk_cec_mask() writes val into target register and ignores the mask. After talking to our hdmi experts, mtk_cec_mask() should read a register, clean only mask bits, and update (val | mask) bits to the register.

Link: https://patchwork.kernel.org/project/linux-mediatek/patch/20220315232301.243... Fixes: 8f83f26891e1 ("drm/mediatek: Add HDMI support") Signed-off-by: Miles Chen miles.chen@mediatek.com Reviewed-by: AngeloGioacchino Del Regno angelogioacchino.delregno@collabora.com Reviewed-by: Matthias Brugger matthias.bgg@gmail.com Cc: Zhiqiang Lin zhiqiang.lin@mediatek.com Cc: CK Hu ck.hu@mediatek.com Cc: Matthias Brugger matthias.bgg@gmail.com Cc: AngeloGioacchino Del Regno angelogioacchino.delregno@collabora.com Signed-off-by: Chun-Kuang Hu chunkuang.hu@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/mediatek/mtk_cec.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/mediatek/mtk_cec.c b/drivers/gpu/drm/mediatek/mtk_cec.c index 7a3eb8c17ef9..4e5482986dc2 100644 --- a/drivers/gpu/drm/mediatek/mtk_cec.c +++ b/drivers/gpu/drm/mediatek/mtk_cec.c @@ -91,7 +91,7 @@ static void mtk_cec_mask(struct mtk_cec *cec, unsigned int offset, u32 tmp = readl(cec->regs + offset) & ~mask;

tmp |= val & mask; - writel(val, cec->regs + offset); + writel(tmp, cec->regs + offset); }

void mtk_cec_set_hpd_event(struct device *dev,

From: Lin Ma linma@zju.edu.cn

[ Upstream commit 1b0e81416a24d6e9b8c2341e22e8bf48f8b8bfc9 ]

Commit 3e3b5dfcd16a ("NFC: reorder the logic in nfc_{un,}register_device") assumes the device_is_registered() in function nfc_dev_up() will help to check when the rfkill is unregistered. However, this check only take effect when device_del(&dev->dev) is done in nfc_unregister_device(). Hence, the rfkill object is still possible be dereferenced.

The crash trace in latest kernel (5.18-rc2):

[ 68.760105] ================================================================== [ 68.760330] BUG: KASAN: use-after-free in __lock_acquire+0x3ec1/0x6750 [ 68.760756] Read of size 8 at addr ffff888009c93018 by task fuzz/313 [ 68.760756] [ 68.760756] CPU: 0 PID: 313 Comm: fuzz Not tainted 5.18.0-rc2 #4 [ 68.760756] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 68.760756] Call Trace: [ 68.760756] <TASK> [ 68.760756] dump_stack_lvl+0x57/0x7d [ 68.760756] print_report.cold+0x5e/0x5db [ 68.760756] ? __lock_acquire+0x3ec1/0x6750 [ 68.760756] kasan_report+0xbe/0x1c0 [ 68.760756] ? __lock_acquire+0x3ec1/0x6750 [ 68.760756] __lock_acquire+0x3ec1/0x6750 [ 68.760756] ? lockdep_hardirqs_on_prepare+0x410/0x410 [ 68.760756] ? register_lock_class+0x18d0/0x18d0 [ 68.760756] lock_acquire+0x1ac/0x4f0 [ 68.760756] ? rfkill_blocked+0xe/0x60 [ 68.760756] ? lockdep_hardirqs_on_prepare+0x410/0x410 [ 68.760756] ? mutex_lock_io_nested+0x12c0/0x12c0 [ 68.760756] ? nla_get_range_signed+0x540/0x540 [ 68.760756] ? _raw_spin_lock_irqsave+0x4e/0x50 [ 68.760756] _raw_spin_lock_irqsave+0x39/0x50 [ 68.760756] ? rfkill_blocked+0xe/0x60 [ 68.760756] rfkill_blocked+0xe/0x60 [ 68.760756] nfc_dev_up+0x84/0x260 [ 68.760756] nfc_genl_dev_up+0x90/0xe0 [ 68.760756] genl_family_rcv_msg_doit+0x1f4/0x2f0 [ 68.760756] ? genl_family_rcv_msg_attrs_parse.constprop.0+0x230/0x230 [ 68.760756] ? security_capable+0x51/0x90 [ 68.760756] genl_rcv_msg+0x280/0x500 [ 68.760756] ? genl_get_cmd+0x3c0/0x3c0 [ 68.760756] ? lock_acquire+0x1ac/0x4f0 [ 68.760756] ? nfc_genl_dev_down+0xe0/0xe0 [ 68.760756] ? lockdep_hardirqs_on_prepare+0x410/0x410 [ 68.760756] netlink_rcv_skb+0x11b/0x340 [ 68.760756] ? genl_get_cmd+0x3c0/0x3c0 [ 68.760756] ? netlink_ack+0x9c0/0x9c0 [ 68.760756] ? netlink_deliver_tap+0x136/0xb00 [ 68.760756] genl_rcv+0x1f/0x30 [ 68.760756] netlink_unicast+0x430/0x710 [ 68.760756] ? memset+0x20/0x40 [ 68.760756] ? netlink_attachskb+0x740/0x740 [ 68.760756] ? __build_skb_around+0x1f4/0x2a0 [ 68.760756] netlink_sendmsg+0x75d/0xc00 [ 68.760756] ? netlink_unicast+0x710/0x710 [ 68.760756] ? netlink_unicast+0x710/0x710 [ 68.760756] sock_sendmsg+0xdf/0x110 [ 68.760756] __sys_sendto+0x19e/0x270 [ 68.760756] ? __ia32_sys_getpeername+0xa0/0xa0 [ 68.760756] ? fd_install+0x178/0x4c0 [ 68.760756] ? fd_install+0x195/0x4c0 [ 68.760756] ? kernel_fpu_begin_mask+0x1c0/0x1c0 [ 68.760756] __x64_sys_sendto+0xd8/0x1b0 [ 68.760756] ? lockdep_hardirqs_on+0xbf/0x130 [ 68.760756] ? syscall_enter_from_user_mode+0x1d/0x50 [ 68.760756] do_syscall_64+0x3b/0x90 [ 68.760756] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 68.760756] RIP: 0033:0x7f67fb50e6b3 ... [ 68.760756] RSP: 002b:00007f67fa91fe90 EFLAGS: 00000293 ORIG_RAX: 000000000000002c [ 68.760756] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f67fb50e6b3 [ 68.760756] RDX: 000000000000001c RSI: 0000559354603090 RDI: 0000000000000003 [ 68.760756] RBP: 00007f67fa91ff00 R08: 00007f67fa91fedc R09: 000000000000000c [ 68.760756] R10: 0000000000000000 R11: 0000000000000293 R12: 00007ffe824d496e [ 68.760756] R13: 00007ffe824d496f R14: 00007f67fa120000 R15: 0000000000000003

[ 68.760756] </TASK> [ 68.760756] [ 68.760756] Allocated by task 279: [ 68.760756] kasan_save_stack+0x1e/0x40 [ 68.760756] __kasan_kmalloc+0x81/0xa0 [ 68.760756] rfkill_alloc+0x7f/0x280 [ 68.760756] nfc_register_device+0xa3/0x1a0 [ 68.760756] nci_register_device+0x77a/0xad0 [ 68.760756] nfcmrvl_nci_register_dev+0x20b/0x2c0 [ 68.760756] nfcmrvl_nci_uart_open+0xf2/0x1dd [ 68.760756] nci_uart_tty_ioctl+0x2c3/0x4a0 [ 68.760756] tty_ioctl+0x764/0x1310 [ 68.760756] __x64_sys_ioctl+0x122/0x190 [ 68.760756] do_syscall_64+0x3b/0x90 [ 68.760756] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 68.760756] [ 68.760756] Freed by task 314: [ 68.760756] kasan_save_stack+0x1e/0x40 [ 68.760756] kasan_set_track+0x21/0x30 [ 68.760756] kasan_set_free_info+0x20/0x30 [ 68.760756] __kasan_slab_free+0x108/0x170 [ 68.760756] kfree+0xb0/0x330 [ 68.760756] device_release+0x96/0x200 [ 68.760756] kobject_put+0xf9/0x1d0 [ 68.760756] nfc_unregister_device+0x77/0x190 [ 68.760756] nfcmrvl_nci_unregister_dev+0x88/0xd0 [ 68.760756] nci_uart_tty_close+0xdf/0x180 [ 68.760756] tty_ldisc_kill+0x73/0x110 [ 68.760756] tty_ldisc_hangup+0x281/0x5b0 [ 68.760756] __tty_hangup.part.0+0x431/0x890 [ 68.760756] tty_release+0x3a8/0xc80 [ 68.760756] __fput+0x1f0/0x8c0 [ 68.760756] task_work_run+0xc9/0x170 [ 68.760756] exit_to_user_mode_prepare+0x194/0x1a0 [ 68.760756] syscall_exit_to_user_mode+0x19/0x50 [ 68.760756] do_syscall_64+0x48/0x90 [ 68.760756] entry_SYSCALL_64_after_hwframe+0x44/0xae

This patch just add the null out of dev->rfkill to make sure such dereference cannot happen. This is safe since the device_lock() already protect the check/write from data race.

Fixes: 3e3b5dfcd16a ("NFC: reorder the logic in nfc_{un,}register_device") Signed-off-by: Lin Ma linma@zju.edu.cn Reviewed-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/nfc/core.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/net/nfc/core.c b/net/nfc/core.c index 8c38a21fb0c6..120259c2b6a7 100644 --- a/net/nfc/core.c +++ b/net/nfc/core.c @@ -1174,6 +1174,7 @@ void nfc_unregister_device(struct nfc_dev *dev) if (dev->rfkill) { rfkill_unregister(dev->rfkill); rfkill_destroy(dev->rfkill); + dev->rfkill = NULL; } dev->shutting_down = true; device_unlock(&dev->dev);

From: Jonathan Teh jonathan.teh@outlook.com

[ Upstream commit 116c3f4a78ebe478d5ad5a038baf931e93e7d748 ]

Increase maximum brightness for Dream Cheeky to 63. Emperically determined based on testing in kernel 4.4 on this device:

Bus 003 Device 002: ID 1d34:0004 Dream Cheeky Webmail Notifier

Fixes: 6c7ad07e9e05 ("HID: migrate USB LED driver from usb misc to hid") Signed-off-by: Jonathan Teh jonathan.teh@outlook.com Signed-off-by: Jiri Kosina jkosina@suse.cz Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hid/hid-led.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/hid/hid-led.c b/drivers/hid/hid-led.c index d3e1ab162f7c..7fc5982a0ca4 100644 --- a/drivers/hid/hid-led.c +++ b/drivers/hid/hid-led.c @@ -369,7 +369,7 @@ static const struct hidled_config hidled_configs[] = { .type = DREAM_CHEEKY, .name = "Dream Cheeky Webmail Notifier", .short_name = "dream_cheeky", - .max_brightness = 31, + .max_brightness = 63, .num_leds = 1, .report_size = 9, .report_type = RAW_REQUEST,

From: Dan Carpenter dan.carpenter@oracle.com

[ Upstream commit 2dc509305cf956381532792cb8dceef2b1504765 ]

The "rxstatus->rs_keyix" eventually gets passed to test_bit() so we need to ensure that it is within the bitmap.

drivers/net/wireless/ath/ath9k/common.c:46 ath9k_cmn_rx_accept() error: passing untrusted data 'rx_stats->rs_keyix' to 'test_bit()'

Fixes: 4ed1a8d4a257 ("ath9k_htc: use ath9k_cmn_rx_accept") Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Acked-by: Toke Høiland-Jørgensen toke@toke.dk Signed-off-by: Kalle Valo quic_kvalo@quicinc.com Link: https://lore.kernel.org/r/20220409061225.GA5447@kili Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/ath/ath9k/htc_drv_txrx.c | 8 ++++++++ 1 file changed, 8 insertions(+)

diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c index 6782c3d0c333..e62ed7f42281 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c @@ -1005,6 +1005,14 @@ static bool ath9k_rx_prepare(struct ath9k_htc_priv *priv, goto rx_next; }

+ if (rxstatus->rs_keyix >= ATH_KEYMAX && + rxstatus->rs_keyix != ATH9K_RXKEYIX_INVALID) { + ath_dbg(common, ANY, + "Invalid keyix, dropping (keyix: %d)\n", + rxstatus->rs_keyix); + goto rx_next; + } + /* Get the RX status information */

memset(rx_status, 0, sizeof(struct ieee80211_rx_status));

From: Amir Goldstein amir73il@gmail.com

[ Upstream commit 623af4f538b5df9b416e1b82f720af7371b4c771 ]

Commit 6960b0d909cd ("fsnotify: change locking order") changed some of the mark_mutex locks in direct reclaim path to use: mutex_lock_nested(&group->mark_mutex, SINGLE_DEPTH_NESTING);

This change is explained: "...It uses nested locking to avoid deadlock in case we do the final iput() on an inode which still holds marks and thus would take the mutex again when calling fsnotify_inode_delete() in destroy_inode()."

The problem is that the mutex_lock_nested() is not a nested lock at all. In fact, it has the opposite effect of preventing lockdep from warning about a very possible deadlock.

Due to these wrong annotations, a deadlock that was introduced with nfsd filecache in kernel v5.4 went unnoticed in v5.4.y for over two years until it was reported recently by Khazhismel Kumykov, only to find out that the deadlock was already fixed in kernel v5.5.

Fix the wrong lockdep annotations.

Cc: Khazhismel Kumykov khazhy@google.com Fixes: 6960b0d909cd ("fsnotify: change locking order") Link: https://lore.kernel.org/r/20220321112310.vpr7oxro2xkz5llh@quack3.lan/ Link: https://lore.kernel.org/r/20220422120327.3459282-4-amir73il@gmail.com Signed-off-by: Amir Goldstein amir73il@gmail.com Signed-off-by: Jan Kara jack@suse.cz Signed-off-by: Sasha Levin sashal@kernel.org --- fs/notify/mark.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/fs/notify/mark.c b/fs/notify/mark.c index 258d99087183..9b7201d1398f 100644 --- a/fs/notify/mark.c +++ b/fs/notify/mark.c @@ -387,7 +387,7 @@ void fsnotify_free_mark(struct fsnotify_mark *mark) void fsnotify_destroy_mark(struct fsnotify_mark *mark, struct fsnotify_group *group) { - mutex_lock_nested(&group->mark_mutex, SINGLE_DEPTH_NESTING); + mutex_lock(&group->mark_mutex); fsnotify_detach_mark(mark); mutex_unlock(&group->mark_mutex); fsnotify_free_mark(mark); @@ -666,7 +666,7 @@ void fsnotify_clear_marks_by_group(struct fsnotify_group *group, * move marks to free to to_free list in one go and then free marks in * to_free list one by one. */ - mutex_lock_nested(&group->mark_mutex, SINGLE_DEPTH_NESTING); + mutex_lock(&group->mark_mutex); list_for_each_entry_safe(mark, lmark, &group->marks_list, g_list) { if (mark->connector->flags & type) list_move(&mark->g_list, &to_free); @@ -675,7 +675,7 @@ void fsnotify_clear_marks_by_group(struct fsnotify_group *group,

clear: while (1) { - mutex_lock_nested(&group->mark_mutex, SINGLE_DEPTH_NESTING); + mutex_lock(&group->mark_mutex); if (list_empty(head)) { mutex_unlock(&group->mark_mutex); break;

From: Dmitry Baryshkov dmitry.baryshkov@linaro.org

[ Upstream commit f0e7e9ed379c012c4d6b09a09b868accc426223c ]

As noticed by Dan ([1] an the followup thread) there are multiple issues with the return values for MSM DSI command transmission callback. In the error case it can easily return a positive value when it should have returned a proper error code.

This commits attempts to fix these issues both in TX and in RX paths.

[1]: https://lore.kernel.org/linux-arm-msm/20211001123617.GH2283@kili/

Fixes: a689554ba6ed ("drm/msm: Initial add DSI connector support") Reported-by: Dan Carpenter dan.carpenter@oracle.com Signed-off-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org Reviewed-by: Abhinav Kumar quic_abhinavk@quicinc.com Tested-by: Marijn Suijten marijn.suijten@somainline.org Patchwork: https://patchwork.freedesktop.org/patch/480501/ Link: https://lore.kernel.org/r/20220401231104.967193-1-dmitry.baryshkov@linaro.or... Signed-off-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/msm/dsi/dsi_host.c | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-)

diff --git a/drivers/gpu/drm/msm/dsi/dsi_host.c b/drivers/gpu/drm/msm/dsi/dsi_host.c index d49f17748119..c9c8d2190515 100644 --- a/drivers/gpu/drm/msm/dsi/dsi_host.c +++ b/drivers/gpu/drm/msm/dsi/dsi_host.c @@ -1240,10 +1240,10 @@ static int dsi_cmds2buf_tx(struct msm_dsi_host *msm_host, dsi_get_bpp(msm_host->format) / 8;

len = dsi_cmd_dma_add(msm_host, msg); - if (!len) { + if (len < 0) { pr_err("%s: failed to add cmd type = 0x%x\n", __func__, msg->type); - return -EINVAL; + return len; }

/* for video mode, do not send cmds more than @@ -1262,10 +1262,14 @@ static int dsi_cmds2buf_tx(struct msm_dsi_host *msm_host, }

ret = dsi_cmd_dma_tx(msm_host, len); - if (ret < len) { - pr_err("%s: cmd dma tx failed, type=0x%x, data0=0x%x, len=%d\n", - __func__, msg->type, (*(u8 *)(msg->tx_buf)), len); - return -ECOMM; + if (ret < 0) { + pr_err("%s: cmd dma tx failed, type=0x%x, data0=0x%x, len=%d, ret=%d\n", + __func__, msg->type, (*(u8 *)(msg->tx_buf)), len, ret); + return ret; + } else if (ret < len) { + pr_err("%s: cmd dma tx failed, type=0x%x, data0=0x%x, ret=%d len=%d\n", + __func__, msg->type, (*(u8 *)(msg->tx_buf)), ret, len); + return -EIO; }

return len; @@ -1988,9 +1992,12 @@ int msm_dsi_host_cmd_rx(struct mipi_dsi_host *host, }

ret = dsi_cmds2buf_tx(msm_host, msg); - if (ret < msg->tx_len) { + if (ret < 0) { pr_err("%s: Read cmd Tx failed, %d\n", __func__, ret); return ret; + } else if (ret < msg->tx_len) { + pr_err("%s: Read cmd Tx failed, too short: %d\n", __func__, ret); + return -ECOMM; }

/*

From: Yang Yingliang yangyingliang@huawei.com

[ Upstream commit f8c242908ad15bbd604d3bcb54961b7d454c43f8 ]

It will cause null-ptr-deref in resource_size(), if platform_get_resource() returns NULL, move calling resource_size() after devm_ioremap_resource() that will check 'res' to avoid null-ptr-deref.

Fixes: 2048e3286f34 ("drm: rockchip: Add basic drm driver") Signed-off-by: Yang Yingliang yangyingliang@huawei.com Signed-off-by: Heiko Stuebner heiko@sntech.de Link: https://patchwork.freedesktop.org/patch/msgid/20220422032854.2995175-1-yangy... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/rockchip/rockchip_drm_vop.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c index 7010424b2f89..80a65eaed0be 100644 --- a/drivers/gpu/drm/rockchip/rockchip_drm_vop.c +++ b/drivers/gpu/drm/rockchip/rockchip_drm_vop.c @@ -1551,10 +1551,10 @@ static int vop_bind(struct device *dev, struct device *master, void *data) vop_win_init(vop);

res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - vop->len = resource_size(res); vop->regs = devm_ioremap_resource(dev, res); if (IS_ERR(vop->regs)) return PTR_ERR(vop->regs); + vop->len = resource_size(res);

vop->regsbak = devm_kzalloc(dev, vop->len, GFP_KERNEL); if (!vop->regsbak)

From: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org

[ Upstream commit 50f0f26e7c8665763d0d7d3372dbcf191f94d077 ]

The irq_of_parse_and_map() returns 0 on failure, not a negative ERRNO.

Fixes: f48e699ddf70 ("irqchip/aspeed-i2c-ic: Add I2C IRQ controller for Aspeed") Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org Signed-off-by: Marc Zyngier maz@kernel.org Link: https://lore.kernel.org/r/20220423094227.33148-1-krzysztof.kozlowski@linaro.... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/irqchip/irq-aspeed-i2c-ic.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/irqchip/irq-aspeed-i2c-ic.c b/drivers/irqchip/irq-aspeed-i2c-ic.c index 815b88dd18f2..45de46066d06 100644 --- a/drivers/irqchip/irq-aspeed-i2c-ic.c +++ b/drivers/irqchip/irq-aspeed-i2c-ic.c @@ -82,8 +82,8 @@ static int __init aspeed_i2c_ic_of_init(struct device_node *node, }

i2c_ic->parent_irq = irq_of_parse_and_map(node, 0); - if (i2c_ic->parent_irq < 0) { - ret = i2c_ic->parent_irq; + if (!i2c_ic->parent_irq) { + ret = -EINVAL; goto err_iounmap; }

From: Dan Carpenter dan.carpenter@oracle.com

[ Upstream commit cf575e31611eb6dccf08fad02e57e35b2187704d ]

The msm_gem_prime_get_sg_table() needs to return error pointers on error. This is called from drm_gem_map_dma_buf() and returning a NULL will lead to a crash in that function.

Fixes: ac45146733b0 ("drm/msm: fix msm_gem_prime_get_sg_table()") Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Reviewed-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org Patchwork: https://patchwork.freedesktop.org/patch/485023/ Link: https://lore.kernel.org/r/YnOmtS5tfENywR9m@kili Signed-off-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/msm/msm_gem_prime.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/msm_gem_prime.c b/drivers/gpu/drm/msm/msm_gem_prime.c index 13403c6da6c7..7e4664968106 100644 --- a/drivers/gpu/drm/msm/msm_gem_prime.c +++ b/drivers/gpu/drm/msm/msm_gem_prime.c @@ -26,7 +26,7 @@ struct sg_table *msm_gem_prime_get_sg_table(struct drm_gem_object *obj) int npages = obj->size >> PAGE_SHIFT;

if (WARN_ON(!msm_obj->pages)) /* should have already pinned! */ - return NULL; + return ERR_PTR(-ENOMEM);

return drm_prime_pages_to_sg(msm_obj->pages, npages); }

From: Miaoqian Lin linmq006@gmail.com

[ Upstream commit 2be84f73785fa9ed6443e3c5b158730266f1c2ee ]

of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when done.

Fixes: 08641c7c74dd ("ASoC: mxs: add device tree support for mxs-saif") Signed-off-by: Miaoqian Lin linmq006@gmail.com Link: https://lore.kernel.org/r/20220511133725.39039-1-linmq006@gmail.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/mxs/mxs-saif.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/sound/soc/mxs/mxs-saif.c b/sound/soc/mxs/mxs-saif.c index 93c019670199..6d0ab4e75518 100644 --- a/sound/soc/mxs/mxs-saif.c +++ b/sound/soc/mxs/mxs-saif.c @@ -780,6 +780,7 @@ static int mxs_saif_probe(struct platform_device *pdev) saif->master_id = saif->id; } else { ret = of_alias_get_id(master, "saif"); + of_node_put(master); if (ret < 0) return ret; else

From: Miaoqian Lin linmq006@gmail.com

[ Upstream commit 94e3dba710fe0afc772172305444250023fc2d30 ]

The pm_runtime_enable will decrease power disable depth. If the probe fails, we should use pm_runtime_disable() to balance pm_runtime_enable().

Fixes: f386509e4959 ("[media] st-delta: STiH4xx multi-format video decoder v4l2 driver") Signed-off-by: Miaoqian Lin linmq006@gmail.com Acked-by: Hugues Fruchet hugues.fruchet@foss.st.com Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Mauro Carvalho Chehab mchehab@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/platform/sti/delta/delta-v4l2.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/media/platform/sti/delta/delta-v4l2.c b/drivers/media/platform/sti/delta/delta-v4l2.c index 7c925f309158..a489d0d17989 100644 --- a/drivers/media/platform/sti/delta/delta-v4l2.c +++ b/drivers/media/platform/sti/delta/delta-v4l2.c @@ -1880,7 +1880,7 @@ static int delta_probe(struct platform_device *pdev) if (ret) { dev_err(delta->dev, "%s failed to initialize firmware ipc channel\n", DELTA_PREFIX); - goto err; + goto err_pm_disable; }

/* register all available decoders */ @@ -1894,7 +1894,7 @@ static int delta_probe(struct platform_device *pdev) if (ret) { dev_err(delta->dev, "%s failed to register V4L2 device\n", DELTA_PREFIX); - goto err; + goto err_pm_disable; }

delta->work_queue = create_workqueue(DELTA_NAME); @@ -1919,6 +1919,8 @@ static int delta_probe(struct platform_device *pdev) destroy_workqueue(delta->work_queue); err_v4l2: v4l2_device_unregister(&delta->v4l2_dev); +err_pm_disable: + pm_runtime_disable(dev); err: return ret; }

From: Pavel Skripkin paskripkin@gmail.com

[ Upstream commit 471bec68457aaf981add77b4f590d65dd7da1059 ]

Syzbot reported that -1 is used as array index. The problem was in missing validation check.

hdw->unit_number is initialized with -1 and then if init table walk fails this value remains unchanged. Since code blindly uses this member for array indexing adding sanity check is the easiest fix for that.

hdw->workpoll initialization moved upper to prevent warning in __flush_work.

Reported-and-tested-by: syzbot+1a247e36149ffd709a9b@syzkaller.appspotmail.com

Fixes: d855497edbfb ("V4L/DVB (4228a): pvrusb2 to kernel 2.6.18") Signed-off-by: Pavel Skripkin paskripkin@gmail.com Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Mauro Carvalho Chehab mchehab@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/usb/pvrusb2/pvrusb2-hdw.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/media/usb/pvrusb2/pvrusb2-hdw.c b/drivers/media/usb/pvrusb2/pvrusb2-hdw.c index 4ca7e1fad08b..4b0d44e25396 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-hdw.c +++ b/drivers/media/usb/pvrusb2/pvrusb2-hdw.c @@ -2563,6 +2563,11 @@ struct pvr2_hdw *pvr2_hdw_create(struct usb_interface *intf, } while (0); mutex_unlock(&pvr2_unit_mtx);

+ INIT_WORK(&hdw->workpoll, pvr2_hdw_worker_poll); + + if (hdw->unit_number == -1) + goto fail; + cnt1 = 0; cnt2 = scnprintf(hdw->name+cnt1,sizeof(hdw->name)-cnt1,"pvrusb2"); cnt1 += cnt2; @@ -2574,8 +2579,6 @@ struct pvr2_hdw *pvr2_hdw_create(struct usb_interface *intf, if (cnt1 >= sizeof(hdw->name)) cnt1 = sizeof(hdw->name)-1; hdw->name[cnt1] = 0;

- INIT_WORK(&hdw->workpoll,pvr2_hdw_worker_poll); - pvr2_trace(PVR2_TRACE_INIT,"Driver unit number is %d, name is %s", hdw->unit_number,hdw->name);

From: Geert Uytterhoeven geert@linux-m68k.org

[ Upstream commit ed6bc6bf0a7d75e80eb1df883c09975ebb74e590 ]

If CONFIG_M54xx=y, CONFIG_MMU=y, and CONFIG_M68KFPU_EMU=y:

{standard input}:272: Error: invalid instruction for this architecture; needs 68000 or higher (68000 [68ec000, 68hc000, 68hc001, 68008, 68302, 68306, 68307, 68322, 68356], 68010, 68020 [68k, 68ec020], 68030 [68ec030], 68040 [68ec040], 68060 [68ec060], cpu32 [68330, 68331, 68332, 68333, 68334, 68336, 68340, 68341, 68349, 68360], fidoa [fido]) -- statement `sub.b %d1,%d3' ignored {standard input}:609: Error: invalid instruction for this architecture; needs 68020 or higher (68020 [68k, 68ec020], 68030 [68ec030], 68040 [68ec040], 68060 [68ec060]) -- statement `bfextu 4(%a1){%d0,#8},%d0' ignored {standard input}:752: Error: operands mismatch -- statement `mulu.l 4(%a0),%d3:%d0' ignored {standard input}:1155: Error: operands mismatch -- statement `divu.l %d0,%d3:%d7' ignored

The math emulation support code is intended for 68020 and higher, and uses several instructions or instruction modes not available on coldfire or 68000.

Originally, the dependency of M68KFPU_EMU on MMU was fine, as MMU support was only available on 68020 or higher. But this assumption was broken by the introduction of MMU support for M547x and M548x.

Drop the dependency on MMU, as the code should work fine on 68020 and up without MMU (which are not yet supported by Linux, though). Add dependencies on M68KCLASSIC (to rule out Coldfire) and FPU (kernel has some type of floating-point support --- be it hardware or software emulated, to rule out anything below 68020).

Fixes: 1f7034b9616e6f14 ("m68k: allow ColdFire 547x and 548x CPUs to be built with MMU enabled") Reported-by: kernel test robot lkp@intel.com Signed-off-by: Geert Uytterhoeven geert@linux-m68k.org Reviewed-by: Greg Ungerer gerg@linux-m68k.org Link: https://lore.kernel.org/r/18c34695b7c95107f60ccca82a4ff252f3edf477.165244611... Signed-off-by: Sasha Levin sashal@kernel.org --- arch/m68k/Kconfig.cpu | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/m68k/Kconfig.cpu b/arch/m68k/Kconfig.cpu index ff5f0896318b..6f13c53c8dc7 100644 --- a/arch/m68k/Kconfig.cpu +++ b/arch/m68k/Kconfig.cpu @@ -308,7 +308,7 @@ comment "Processor Specific Options"

config M68KFPU_EMU bool "Math emulation support" - depends on MMU + depends on M68KCLASSIC && FPU help At some point in the future, this will cause floating-point math instructions to be emulated by the kernel on machines that lack a

From: Yang Yingliang yangyingliang@huawei.com

[ Upstream commit be2af740e2a9c7134f2d8ab4f104006e110b13de ]

Fix the missing clk_disable_unprepare() before return from wm2000_anc_transition() in the error handling case.

Fixes: 514cfd6dd725 ("ASoC: wm2000: Integrate with clock API") Signed-off-by: Yang Yingliang yangyingliang@huawei.com Acked-by: Charles Keepax ckeepax@opensource.cirrus.com Link: https://lore.kernel.org/r/20220514091053.686416-1-yangyingliang@huawei.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/wm2000.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/sound/soc/codecs/wm2000.c b/sound/soc/codecs/wm2000.c index 23cde3a0dc11..73cda3c2a861 100644 --- a/sound/soc/codecs/wm2000.c +++ b/sound/soc/codecs/wm2000.c @@ -545,7 +545,7 @@ static int wm2000_anc_transition(struct wm2000_priv *wm2000, { struct i2c_client *i2c = wm2000->i2c; int i, j; - int ret; + int ret = 0;

if (wm2000->anc_mode == mode) return 0; @@ -575,13 +575,13 @@ static int wm2000_anc_transition(struct wm2000_priv *wm2000, ret = anc_transitions[i].step[j](i2c, anc_transitions[i].analogue); if (ret != 0) - return ret; + break; }

if (anc_transitions[i].dest == ANC_OFF) clk_disable_unprepare(wm2000->mclk);

- return 0; + return ret; }

static int wm2000_anc_set_mode(struct wm2000_priv *wm2000)

From: David Howells dhowells@redhat.com

[ Upstream commit 114af61f88fbe34d641b13922d098ffec4c1be1b ]

rxrpc has a timer to trigger resending of unacked data packets in a call. This is not cancelled when a client call switches to the receive phase on the basis that most calls don't last long enough for it to ever expire. However, if it *does* expire after we've started to receive the reply, we shouldn't then go into trying to retransmit or pinging the server to find out if an ack got lost.

Fix this by skipping the resend code if we're into receiving the reply to a client call.

Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both") Signed-off-by: David Howells dhowells@redhat.com cc: linux-afs@lists.infradead.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/rxrpc/call_event.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/net/rxrpc/call_event.c b/net/rxrpc/call_event.c index 7a77844aab16..7444290b228a 100644 --- a/net/rxrpc/call_event.c +++ b/net/rxrpc/call_event.c @@ -403,7 +403,8 @@ void rxrpc_process_call(struct work_struct *work) goto recheck_state; }

- if (test_and_clear_bit(RXRPC_CALL_EV_RESEND, &call->events)) { + if (test_and_clear_bit(RXRPC_CALL_EV_RESEND, &call->events) && + call->state != RXRPC_CALL_CLIENT_RECV_REPLY) { rxrpc_resend(call, now); goto recheck_state; }

From: Miaoqian Lin linmq006@gmail.com

[ Upstream commit aad66a3c78da668f4506356c2fdb70b7a19ecc76 ]

The device_node pointer is returned by of_parse_phandle() with refcount incremented. We should use of_node_put() on it when done.

Fixes: c97c4090ff72 ("soc: qcom: smsm: Add driver for Qualcomm SMSM") Signed-off-by: Miaoqian Lin linmq006@gmail.com Signed-off-by: Bjorn Andersson bjorn.andersson@linaro.org Link: https://lore.kernel.org/r/20220308073648.24634-1-linmq006@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/soc/qcom/smsm.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/soc/qcom/smsm.c b/drivers/soc/qcom/smsm.c index 2b49d2c212da..5304529b41c9 100644 --- a/drivers/soc/qcom/smsm.c +++ b/drivers/soc/qcom/smsm.c @@ -367,6 +367,7 @@ static int smsm_parse_ipc(struct qcom_smsm *smsm, unsigned host_id) return 0;

host->ipc_regmap = syscon_node_to_regmap(syscon); + of_node_put(syscon); if (IS_ERR(host->ipc_regmap)) return PTR_ERR(host->ipc_regmap);

From: Stefan Wahren stefan.wahren@i2se.com

[ Upstream commit 97bd8659c1c46c23e4daea7e040befca30939950 ]

Recently this has been fixed in the vendor tree, so upstream this.

Fixes: 731b26a6ac17 ("ARM: bcm2835: Add names for the Raspberry Pi GPIO lines") Signed-off-by: Phil Elwell phil@raspberrypi.com Signed-off-by: Stefan Wahren stefan.wahren@i2se.com Signed-off-by: Florian Fainelli f.fainelli@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/bcm2835-rpi-b.dts | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts index cca4a75a5651..6f39d5e54cb8 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts @@ -48,18 +48,17 @@ "GPIO18", "NC", /* GPIO19 */ "NC", /* GPIO20 */ - "GPIO21", + "CAM_GPIO0", "GPIO22", "GPIO23", "GPIO24", "GPIO25", "NC", /* GPIO26 */ - "CAM_GPIO0", - /* Binary number representing build/revision */ - "CONFIG0", - "CONFIG1", - "CONFIG2", - "CONFIG3", + "GPIO27", + "GPIO28", + "GPIO29", + "GPIO30", + "GPIO31", "NC", /* GPIO32 */ "NC", /* GPIO33 */ "NC", /* GPIO34 */

From: Gustavo A. R. Silva gustavoars@kernel.org

[ Upstream commit 54db804d5d7d36709d1ce70bde3b9a6c61b290b6 ]

Fix the following Wstringop-overflow warnings when building with GCC-11:

drivers/scsi/fcoe/fcoe.c: In function ‘fcoe_netdev_config’: drivers/scsi/fcoe/fcoe.c:744:32: warning: ‘fcoe_wwn_from_mac’ accessing 32 bytes in a region of size 6 [-Wstringop-overflow=] 744 | wwnn = fcoe_wwn_from_mac(ctlr->ctl_src_addr, 1, 0); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/fcoe/fcoe.c:744:32: note: referencing argument 1 of type ‘unsigned char *’ In file included from drivers/scsi/fcoe/fcoe.c:36: ./include/scsi/libfcoe.h:252:5: note: in a call to function ‘fcoe_wwn_from_mac’ 252 | u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN], unsigned int, unsigned int); | ^~~~~~~~~~~~~~~~~ drivers/scsi/fcoe/fcoe.c:747:32: warning: ‘fcoe_wwn_from_mac’ accessing 32 bytes in a region of size 6 [-Wstringop-overflow=] 747 | wwpn = fcoe_wwn_from_mac(ctlr->ctl_src_addr, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 748 | 2, 0); | ~~~~~ drivers/scsi/fcoe/fcoe.c:747:32: note: referencing argument 1 of type ‘unsigned char *’ In file included from drivers/scsi/fcoe/fcoe.c:36: ./include/scsi/libfcoe.h:252:5: note: in a call to function ‘fcoe_wwn_from_mac’ 252 | u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN], unsigned int, unsigned int); | ^~~~~~~~~~~~~~~~~ CC drivers/scsi/bnx2fc/bnx2fc_io.o In function ‘bnx2fc_net_config’, inlined from ‘bnx2fc_if_create’ at drivers/scsi/bnx2fc/bnx2fc_fcoe.c:1543:7: drivers/scsi/bnx2fc/bnx2fc_fcoe.c:833:32: warning: ‘fcoe_wwn_from_mac’ accessing 32 bytes in a region of size 6 [-Wstringop-overflow=] 833 | wwnn = fcoe_wwn_from_mac(ctlr->ctl_src_addr, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 834 | 1, 0); | ~~~~~ drivers/scsi/bnx2fc/bnx2fc_fcoe.c: In function ‘bnx2fc_if_create’: drivers/scsi/bnx2fc/bnx2fc_fcoe.c:833:32: note: referencing argument 1 of type ‘unsigned char *’ In file included from drivers/scsi/bnx2fc/bnx2fc.h:53, from drivers/scsi/bnx2fc/bnx2fc_fcoe.c:17: ./include/scsi/libfcoe.h:252:5: note: in a call to function ‘fcoe_wwn_from_mac’ 252 | u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN], unsigned int, unsigned int); | ^~~~~~~~~~~~~~~~~ In function ‘bnx2fc_net_config’, inlined from ‘bnx2fc_if_create’ at drivers/scsi/bnx2fc/bnx2fc_fcoe.c:1543:7: drivers/scsi/bnx2fc/bnx2fc_fcoe.c:839:32: warning: ‘fcoe_wwn_from_mac’ accessing 32 bytes in a region of size 6 [-Wstringop-overflow=] 839 | wwpn = fcoe_wwn_from_mac(ctlr->ctl_src_addr, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 840 | 2, 0); | ~~~~~ drivers/scsi/bnx2fc/bnx2fc_fcoe.c: In function ‘bnx2fc_if_create’: drivers/scsi/bnx2fc/bnx2fc_fcoe.c:839:32: note: referencing argument 1 of type ‘unsigned char *’ In file included from drivers/scsi/bnx2fc/bnx2fc.h:53, from drivers/scsi/bnx2fc/bnx2fc_fcoe.c:17: ./include/scsi/libfcoe.h:252:5: note: in a call to function ‘fcoe_wwn_from_mac’ 252 | u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN], unsigned int, unsigned int); | ^~~~~~~~~~~~~~~~~ drivers/scsi/qedf/qedf_main.c: In function ‘__qedf_probe’: drivers/scsi/qedf/qedf_main.c:3520:30: warning: ‘fcoe_wwn_from_mac’ accessing 32 bytes in a region of size 6 [-Wstringop-overflow=] 3520 | qedf->wwnn = fcoe_wwn_from_mac(qedf->mac, 1, 0); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/qedf/qedf_main.c:3520:30: note: referencing argument 1 of type ‘unsigned char *’ In file included from drivers/scsi/qedf/qedf.h:9, from drivers/scsi/qedf/qedf_main.c:23: ./include/scsi/libfcoe.h:252:5: note: in a call to function ‘fcoe_wwn_from_mac’ 252 | u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN], unsigned int, unsigned int); | ^~~~~~~~~~~~~~~~~ drivers/scsi/qedf/qedf_main.c:3521:30: warning: ‘fcoe_wwn_from_mac’ accessing 32 bytes in a region of size 6 [-Wstringop-overflow=] 3521 | qedf->wwpn = fcoe_wwn_from_mac(qedf->mac, 2, 0); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/scsi/qedf/qedf_main.c:3521:30: note: referencing argument 1 of type ‘unsigned char *’ In file included from drivers/scsi/qedf/qedf.h:9, from drivers/scsi/qedf/qedf_main.c:23: ./include/scsi/libfcoe.h:252:5: note: in a call to function ‘fcoe_wwn_from_mac’ 252 | u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN], unsigned int, unsigned int); | ^~~~~~~~~~~~~~~~~

by changing the array size to the correct value of ETH_ALEN in the argument declaration.

Also, fix a couple of checkpatch warnings: WARNING: function definition argument 'unsigned int' should also have an identifier name

This helps with the ongoing efforts to globally enable -Wstringop-overflow.

Link: https://github.com/KSPP/linux/issues/181 Fixes: 85b4aa4926a5 ("[SCSI] fcoe: Fibre Channel over Ethernet") Signed-off-by: Gustavo A. R. Silva gustavoars@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/fcoe/fcoe_ctlr.c | 2 +- include/scsi/libfcoe.h | 3 ++- 2 files changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/scsi/fcoe/fcoe_ctlr.c b/drivers/scsi/fcoe/fcoe_ctlr.c index eaab59afd90c..1c8fa41aa3ab 100644 --- a/drivers/scsi/fcoe/fcoe_ctlr.c +++ b/drivers/scsi/fcoe/fcoe_ctlr.c @@ -1978,7 +1978,7 @@ EXPORT_SYMBOL(fcoe_ctlr_recv_flogi); * * Returns: u64 fc world wide name */ -u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN], +u64 fcoe_wwn_from_mac(unsigned char mac[ETH_ALEN], unsigned int scheme, unsigned int port) { u64 wwn; diff --git a/include/scsi/libfcoe.h b/include/scsi/libfcoe.h index 78b9ad2df0b1..6f3571f42529 100644 --- a/include/scsi/libfcoe.h +++ b/include/scsi/libfcoe.h @@ -261,7 +261,8 @@ int fcoe_ctlr_recv_flogi(struct fcoe_ctlr *, struct fc_lport *, struct fc_frame *);

/* libfcoe funcs */ -u64 fcoe_wwn_from_mac(unsigned char mac[MAX_ADDR_LEN], unsigned int, unsigned int); +u64 fcoe_wwn_from_mac(unsigned char mac[ETH_ALEN], unsigned int scheme, + unsigned int port); int fcoe_libfc_config(struct fc_lport *, struct fcoe_ctlr *, const struct libfc_function_template *, int init_fcp); u32 fcoe_fc_crc(struct fc_frame *fp);

From: Miaohe Lin linmiaohe@huawei.com

[ Upstream commit da63dc84befaa9e6079a0bc363ff0eaa975f9073 ]

Compaction sysfs file is created via compaction_register_node in register_node. But we forgot to remove it in unregister_node. Thus compaction sysfs file is leaked. Using compaction_unregister_node to fix this issue.

Link: https://lkml.kernel.org/r/20220401070905.43679-1-linmiaohe@huawei.com Fixes: ed4a6d7f0676 ("mm: compaction: add /sys trigger for per-node memory compaction") Signed-off-by: Miaohe Lin linmiaohe@huawei.com Cc: Greg Kroah-Hartman gregkh@linuxfoundation.org Cc: Rafael J. Wysocki rafael@kernel.org Cc: Mel Gorman mel@csn.ul.ie Cc: Minchan Kim minchan.kim@gmail.com Cc: KAMEZAWA Hiroyuki kamezawa.hiroyu@jp.fujitsu.com Cc: KOSAKI Motohiro kosaki.motohiro@jp.fujitsu.com Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/base/node.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/base/node.c b/drivers/base/node.c index 5c39f14d15a5..57eef6b24448 100644 --- a/drivers/base/node.c +++ b/drivers/base/node.c @@ -337,6 +337,7 @@ static int register_node(struct node *node, int num) */ void unregister_node(struct node *node) { + compaction_unregister_node(node); hugetlb_unregister_node(node); /* no-op, if memoryless node */

device_unregister(&node->dev);

From: Randy Dunlap rdunlap@infradead.org

[ Upstream commit b793a01000122d2bd133ba451a76cc135b5e162c ]

__setup() handlers should return 1 to obsolete_checksetup() in init/main.c to indicate that the boot option has been handled.

A return of 0 causes the boot option/value to be listed as an Unknown kernel parameter and added to init's (limited) argument or environment strings.

Also, error return codes don't mean anything to obsolete_checksetup() -- only non-zero (usually 1) or zero. So return 1 from powersave_off().

Fixes: 302eca184fb8 ("[POWERPC] cell: use ppc_md->power_save instead of cbe_idle_loop") Reported-by: Igor Zhbanov izh1979@gmail.com Signed-off-by: Randy Dunlap rdunlap@infradead.org Signed-off-by: Michael Ellerman mpe@ellerman.id.au Link: https://lore.kernel.org/r/20220502192925.19954-1-rdunlap@infradead.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/powerpc/kernel/idle.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/powerpc/kernel/idle.c b/arch/powerpc/kernel/idle.c index d7216c9abda1..ca79aacfeda2 100644 --- a/arch/powerpc/kernel/idle.c +++ b/arch/powerpc/kernel/idle.c @@ -41,7 +41,7 @@ static int __init powersave_off(char *arg) { ppc_md.power_save = NULL; cpuidle_disable = IDLE_POWERSAVE_OFF; - return 0; + return 1; } __setup("powersave=off", powersave_off);

From: Qi Zheng zhengqi.arch@bytedance.com

[ Upstream commit 6b9dbedbe3499fef862c4dff5217cf91f34e43b3 ]

pty_write() invokes kmalloc() which may invoke a normal printk() to print failure message. This can cause a deadlock in the scenario reported by syz-bot below:

CPU0 CPU1 CPU2 ---- ---- ---- lock(console_owner); lock(&port_lock_key); lock(&port->lock); lock(&port_lock_key); lock(&port->lock); lock(console_owner);

As commit dbdda842fe96 ("printk: Add console owner and waiter logic to load balance console writes") said, such deadlock can be prevented by using printk_deferred() in kmalloc() (which is invoked in the section guarded by the port->lock). But there are too many printk() on the kmalloc() path, and kmalloc() can be called from anywhere, so changing printk() to printk_deferred() is too complicated and inelegant.

Therefore, this patch chooses to specify __GFP_NOWARN to kmalloc(), so that printk() will not be called, and this deadlock problem can be avoided.

Syzbot reported the following lockdep error:

====================================================== WARNING: possible circular locking dependency detected 5.4.143-00237-g08ccc19a-dirty #10 Not tainted ------------------------------------------------------ syz-executor.4/29420 is trying to acquire lock: ffffffff8aedb2a0 (console_owner){....}-{0:0}, at: console_trylock_spinning kernel/printk/printk.c:1752 [inline] ffffffff8aedb2a0 (console_owner){....}-{0:0}, at: vprintk_emit+0x2ca/0x470 kernel/printk/printk.c:2023

but task is already holding lock: ffff8880119c9158 (&port->lock){-.-.}-{2:2}, at: pty_write+0xf4/0x1f0 drivers/tty/pty.c:120

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #2 (&port->lock){-.-.}-{2:2}: __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x35/0x50 kernel/locking/spinlock.c:159 tty_port_tty_get drivers/tty/tty_port.c:288 [inline] <-- lock(&port->lock); tty_port_default_wakeup+0x1d/0xb0 drivers/tty/tty_port.c:47 serial8250_tx_chars+0x530/0xa80 drivers/tty/serial/8250/8250_port.c:1767 serial8250_handle_irq.part.0+0x31f/0x3d0 drivers/tty/serial/8250/8250_port.c:1854 serial8250_handle_irq drivers/tty/serial/8250/8250_port.c:1827 [inline] <-- lock(&port_lock_key); serial8250_default_handle_irq+0xb2/0x220 drivers/tty/serial/8250/8250_port.c:1870 serial8250_interrupt+0xfd/0x200 drivers/tty/serial/8250/8250_core.c:126 __handle_irq_event_percpu+0x109/0xa50 kernel/irq/handle.c:156 [...]

-> #1 (&port_lock_key){-.-.}-{2:2}: __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x35/0x50 kernel/locking/spinlock.c:159 serial8250_console_write+0x184/0xa40 drivers/tty/serial/8250/8250_port.c:3198 <-- lock(&port_lock_key); call_console_drivers kernel/printk/printk.c:1819 [inline] console_unlock+0x8cb/0xd00 kernel/printk/printk.c:2504 vprintk_emit+0x1b5/0x470 kernel/printk/printk.c:2024 <-- lock(console_owner); vprintk_func+0x8d/0x250 kernel/printk/printk_safe.c:394 printk+0xba/0xed kernel/printk/printk.c:2084 register_console+0x8b3/0xc10 kernel/printk/printk.c:2829 univ8250_console_init+0x3a/0x46 drivers/tty/serial/8250/8250_core.c:681 console_init+0x49d/0x6d3 kernel/printk/printk.c:2915 start_kernel+0x5e9/0x879 init/main.c:713 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:241

-> #0 (console_owner){....}-{0:0}: [...] lock_acquire+0x127/0x340 kernel/locking/lockdep.c:4734 console_trylock_spinning kernel/printk/printk.c:1773 [inline] <-- lock(console_owner); vprintk_emit+0x307/0x470 kernel/printk/printk.c:2023 vprintk_func+0x8d/0x250 kernel/printk/printk_safe.c:394 printk+0xba/0xed kernel/printk/printk.c:2084 fail_dump lib/fault-inject.c:45 [inline] should_fail+0x67b/0x7c0 lib/fault-inject.c:144 __should_failslab+0x152/0x1c0 mm/failslab.c:33 should_failslab+0x5/0x10 mm/slab_common.c:1224 slab_pre_alloc_hook mm/slab.h:468 [inline] slab_alloc_node mm/slub.c:2723 [inline] slab_alloc mm/slub.c:2807 [inline] __kmalloc+0x72/0x300 mm/slub.c:3871 kmalloc include/linux/slab.h:582 [inline] tty_buffer_alloc+0x23f/0x2a0 drivers/tty/tty_buffer.c:175 __tty_buffer_request_room+0x156/0x2a0 drivers/tty/tty_buffer.c:273 tty_insert_flip_string_fixed_flag+0x93/0x250 drivers/tty/tty_buffer.c:318 tty_insert_flip_string include/linux/tty_flip.h:37 [inline] pty_write+0x126/0x1f0 drivers/tty/pty.c:122 <-- lock(&port->lock); n_tty_write+0xa7a/0xfc0 drivers/tty/n_tty.c:2356 do_tty_write drivers/tty/tty_io.c:961 [inline] tty_write+0x512/0x930 drivers/tty/tty_io.c:1045 __vfs_write+0x76/0x100 fs/read_write.c:494 [...]

other info that might help us debug this:

Chain exists of: console_owner --> &port_lock_key --> &port->lock

Link: https://lkml.kernel.org/r/20220511061951.1114-2-zhengqi.arch@bytedance.com Link: https://lkml.kernel.org/r/20220510113809.80626-2-zhengqi.arch@bytedance.com Fixes: b6da31b2c07c ("tty: Fix data race in tty_insert_flip_string_fixed_flag") Signed-off-by: Qi Zheng zhengqi.arch@bytedance.com Acked-by: Jiri Slaby jirislaby@kernel.org Acked-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Cc: Akinobu Mita akinobu.mita@gmail.com Cc: Vlastimil Babka vbabka@suse.cz Cc: Steven Rostedt (Google) rostedt@goodmis.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/tty/tty_buffer.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/tty_buffer.c b/drivers/tty/tty_buffer.c index a5b32dd056be..608769f6a564 100644 --- a/drivers/tty/tty_buffer.c +++ b/drivers/tty/tty_buffer.c @@ -166,7 +166,8 @@ static struct tty_buffer *tty_buffer_alloc(struct tty_port *port, size_t size) have queued and recycle that ? */ if (atomic_read(&port->buf.mem_used) > port->buf.mem_limit) return NULL; - p = kmalloc(sizeof(struct tty_buffer) + 2 * size, GFP_ATOMIC); + p = kmalloc(sizeof(struct tty_buffer) + 2 * size, + GFP_ATOMIC | __GFP_NOWARN); if (p == NULL) return NULL;

From: Kajol Jain kjain@linux.ibm.com

[ Upstream commit ab0cc6bbf0c812731c703ec757fcc3fc3a457a34 ]

Thresh compare bits for a event is used to program thresh compare field in Monitor Mode Control Register A (MMCRA: 9-18 bits for power9). When scheduling events as a group, all events in that group should match value in threshold bits (like thresh compare, thresh control, thresh select). Otherwise event open for the sibling events should fail. But in the current code, incase thresh compare bits are not valid, we are not failing in group_constraint function which can result in invalid group schduling.

Fix the issue by returning -1 incase event is threshold and threshold compare value is not valid.

Thresh control bits in the event code is used to program thresh_ctl field in Monitor Mode Control Register A (MMCRA: 48-55). In below example, the scheduling of group events PM_MRK_INST_CMPL (873534401e0) and PM_THRESH_MET (8734340101ec) is expected to fail as both event request different thresh control bits and invalid thresh compare value.

Result before the patch changes:

[command]# perf stat -e "{r8735340401e0,r8734340101ec}" sleep 1

Performance counter stats for 'sleep 1':

11,048 r8735340401e0 1,967 r8734340101ec

1.001354036 seconds time elapsed

0.001421000 seconds user 0.000000000 seconds sys

Result after the patch changes:

[command]# perf stat -e "{r8735340401e0,r8734340101ec}" sleep 1 Error: The sys_perf_event_open() syscall returned with 22 (Invalid argument) for event (r8735340401e0). /bin/dmesg | grep -i perf may provide additional information.

Fixes: 78a16d9fc1206 ("powerpc/perf: Avoid FAB_*_MATCH checks for power9") Signed-off-by: Kajol Jain kjain@linux.ibm.com Reviewed-by: Athira Rajeev atrajeev@linux.vnet.ibm.com Signed-off-by: Michael Ellerman mpe@ellerman.id.au Link: https://lore.kernel.org/r/20220506061015.43916-2-kjain@linux.ibm.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/powerpc/perf/isa207-common.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/powerpc/perf/isa207-common.c b/arch/powerpc/perf/isa207-common.c index 24a78565bca6..279bf3a3afbf 100644 --- a/arch/powerpc/perf/isa207-common.c +++ b/arch/powerpc/perf/isa207-common.c @@ -324,7 +324,8 @@ int isa207_get_constraint(u64 event, unsigned long *maskp, unsigned long *valp) if (event_is_threshold(event) && is_thresh_cmp_valid(event)) { mask |= CNST_THRESH_MASK; value |= CNST_THRESH_VAL(event >> EVENT_THRESH_SHIFT); - } + } else if (event_is_threshold(event)) + return -1; } else { /* * Special case for PM_MRK_FAB_RSP_MATCH and PM_MRK_FAB_RSP_MATCH_CYC,

From: Björn Ardö bjorn.ardo@axis.com

[ Upstream commit bca1a1004615efe141fd78f360ecc48c60bc4ad5 ]

This reverts commit c7dacf5b0f32957b24ef29df1207dc2cd8307743, "mailbox: avoid timer start from callback"

The previous commit was reverted since it lead to a race that caused the hrtimer to not be started at all. The check for hrtimer_active() in msg_submit() will return true if the callback function txdone_hrtimer() is currently running. This function could return HRTIMER_NORESTART and then the timer will not be restarted, and also msg_submit() will not start the timer. This will lead to a message actually being submitted but no timer will start to check for its compleation.

The original fix that added checking hrtimer_active() was added to avoid a warning with hrtimer_forward. Looking in the kernel another solution to avoid this warning is to check hrtimer_is_queued() before calling hrtimer_forward_now() instead. This however requires a lock so the timer is not started by msg_submit() inbetween this check and the hrtimer_forward() call.

Fixes: c7dacf5b0f32 ("mailbox: avoid timer start from callback") Signed-off-by: Björn Ardö bjorn.ardo@axis.com Signed-off-by: Jassi Brar jaswinder.singh@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mailbox/mailbox.c | 19 +++++++++++++------ include/linux/mailbox_controller.h | 1 + 2 files changed, 14 insertions(+), 6 deletions(-)

diff --git a/drivers/mailbox/mailbox.c b/drivers/mailbox/mailbox.c index 10a559cfb7ea..aa28fdcb81b9 100644 --- a/drivers/mailbox/mailbox.c +++ b/drivers/mailbox/mailbox.c @@ -85,11 +85,11 @@ static void msg_submit(struct mbox_chan *chan) exit: spin_unlock_irqrestore(&chan->lock, flags);

- /* kick start the timer immediately to avoid delays */ if (!err && (chan->txdone_method & TXDONE_BY_POLL)) { - /* but only if not already active */ - if (!hrtimer_active(&chan->mbox->poll_hrt)) - hrtimer_start(&chan->mbox->poll_hrt, 0, HRTIMER_MODE_REL); + /* kick start the timer immediately to avoid delays */ + spin_lock_irqsave(&chan->mbox->poll_hrt_lock, flags); + hrtimer_start(&chan->mbox->poll_hrt, 0, HRTIMER_MODE_REL); + spin_unlock_irqrestore(&chan->mbox->poll_hrt_lock, flags); } }

@@ -123,20 +123,26 @@ static enum hrtimer_restart txdone_hrtimer(struct hrtimer *hrtimer) container_of(hrtimer, struct mbox_controller, poll_hrt); bool txdone, resched = false; int i; + unsigned long flags;

for (i = 0; i < mbox->num_chans; i++) { struct mbox_chan *chan = &mbox->chans[i];

if (chan->active_req && chan->cl) { - resched = true; txdone = chan->mbox->ops->last_tx_done(chan); if (txdone) tx_tick(chan, 0); + else + resched = true; } }

if (resched) { - hrtimer_forward_now(hrtimer, ms_to_ktime(mbox->txpoll_period)); + spin_lock_irqsave(&mbox->poll_hrt_lock, flags); + if (!hrtimer_is_queued(hrtimer)) + hrtimer_forward_now(hrtimer, ms_to_ktime(mbox->txpoll_period)); + spin_unlock_irqrestore(&mbox->poll_hrt_lock, flags); + return HRTIMER_RESTART; } return HRTIMER_NORESTART; @@ -473,6 +479,7 @@ int mbox_controller_register(struct mbox_controller *mbox) hrtimer_init(&mbox->poll_hrt, CLOCK_MONOTONIC, HRTIMER_MODE_REL); mbox->poll_hrt.function = txdone_hrtimer; + spin_lock_init(&mbox->poll_hrt_lock); }

for (i = 0; i < mbox->num_chans; i++) { diff --git a/include/linux/mailbox_controller.h b/include/linux/mailbox_controller.h index 74deadb42d76..5a4524f66ea1 100644 --- a/include/linux/mailbox_controller.h +++ b/include/linux/mailbox_controller.h @@ -83,6 +83,7 @@ struct mbox_controller { const struct of_phandle_args *sp); /* Internal to API */ struct hrtimer poll_hrt; + spinlock_t poll_hrt_lock; struct list_head node; };

From: Miaoqian Lin linmq006@gmail.com

[ Upstream commit b23789a59fa6f00e98a319291819f91fbba0deb8 ]

of_parse_phandle() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak.

Fixes: d10715be03bd ("video: ARM CLCD: Add DT support") Signed-off-by: Miaoqian Lin linmq006@gmail.com Signed-off-by: Helge Deller deller@gmx.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/video/fbdev/amba-clcd.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/drivers/video/fbdev/amba-clcd.c b/drivers/video/fbdev/amba-clcd.c index 36d25190b48c..66c7d766e330 100644 --- a/drivers/video/fbdev/amba-clcd.c +++ b/drivers/video/fbdev/amba-clcd.c @@ -838,12 +838,15 @@ static int clcdfb_of_vram_setup(struct clcd_fb *fb) return -ENODEV;

fb->fb.screen_base = of_iomap(memory, 0); - if (!fb->fb.screen_base) + if (!fb->fb.screen_base) { + of_node_put(memory); return -ENOMEM; + }

fb->fb.fix.smem_start = of_translate_address(memory, of_get_address(memory, 0, &size, NULL)); fb->fb.fix.smem_len = size; + of_node_put(memory);

return 0; }

From: Leo Yan leo.yan@linaro.org

[ Upstream commit c4040212bc97d16040712a410335f93bc94d2262 ]

If the slang lib is not installed on the system, perf c2c tool disables TUI mode and roll back to use stdio mode; but the flag 'c2c.use_stdio' is missed to set true and thus it wrongly applies UI quirks in the function ui_quirks().

This commit forces to use stdio interface if slang is not supported, and it can avoid to apply the UI quirks and show the correct metric header.

Before:

================================================= Shared Cache Line Distribution Pareto ================================================= ------------------------------------------------------------------------------- 0 0 0 99 0 0 0 0xaaaac17d6000 ------------------------------------------------------------------------------- 0.00% 0.00% 6.06% 0.00% 0.00% 0.00% 0x20 N/A 0 0xaaaac17c25ac 0 0 43 375 18469 2 [.] 0x00000000000025ac memstress memstress[25ac] 0 0.00% 0.00% 93.94% 0.00% 0.00% 0.00% 0x29 N/A 0 0xaaaac17c3e88 0 0 173 180 135 2 [.] 0x0000000000003e88 memstress memstress[3e88] 0

After:

================================================= Shared Cache Line Distribution Pareto ================================================= ------------------------------------------------------------------------------- 0 0 0 99 0 0 0 0xaaaac17d6000 ------------------------------------------------------------------------------- 0.00% 0.00% 6.06% 0.00% 0.00% 0.00% 0x20 N/A 0 0xaaaac17c25ac 0 0 43 375 18469 2 [.] 0x00000000000025ac memstress memstress[25ac] 0 0.00% 0.00% 93.94% 0.00% 0.00% 0.00% 0x29 N/A 0 0xaaaac17c3e88 0 0 173 180 135 2 [.] 0x0000000000003e88 memstress memstress[3e88] 0

Fixes: 5a1a99cd2e4e1557 ("perf c2c report: Add main TUI browser") Reported-by: Joe Mario jmario@redhat.com Signed-off-by: Leo Yan leo.yan@linaro.org Cc: Alexander Shishkin alexander.shishkin@linux.intel.com Cc: Jiri Olsa jolsa@kernel.org Cc: Mark Rutland mark.rutland@arm.com Cc: Namhyung Kim namhyung@kernel.org Cc: Peter Zijlstra peterz@infradead.org Link: http://lore.kernel.org/lkml/20220526145400.611249-1-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/perf/builtin-c2c.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/tools/perf/builtin-c2c.c b/tools/perf/builtin-c2c.c index 264d458bfe2a..9cbd8b0d5b77 100644 --- a/tools/perf/builtin-c2c.c +++ b/tools/perf/builtin-c2c.c @@ -2552,9 +2552,7 @@ static int perf_c2c__report(int argc, const char **argv) "the input file to process"), OPT_INCR('N', "node-info", &c2c.node_info, "show extra node info in report (repeat for more info)"), -#ifdef HAVE_SLANG_SUPPORT OPT_BOOLEAN(0, "stdio", &c2c.use_stdio, "Use the stdio interface"), -#endif OPT_BOOLEAN(0, "stats", &c2c.stats_only, "Display only statistic tables (implies --stdio)"), OPT_BOOLEAN(0, "full-symbols", &c2c.symbol_full, @@ -2581,6 +2579,10 @@ static int perf_c2c__report(int argc, const char **argv) if (argc) usage_with_options(report_c2c_usage, options);

+#ifndef HAVE_SLANG_SUPPORT + c2c.use_stdio = true; +#endif + if (c2c.stats_only) c2c.use_stdio = true;

From: Johannes Berg johannes.berg@intel.com

commit 2965c4cdf7ad9ce0796fac5e57debb9519ea721e upstream.

In ieee80211_vif_use_reserved_context(), when we have an old context and the new context's replace_state is set to IEEE80211_CHANCTX_REPLACE_NONE, we free the old context in ieee80211_vif_use_reserved_reassign(). Therefore, we cannot check the old_ctx anymore, so we should set it to NULL after this point.

However, since the new_ctx replace state is clearly not IEEE80211_CHANCTX_REPLACES_OTHER, we're not going to do anything else in this function and can just return to avoid accessing the freed old_ctx.

Cc: stable@vger.kernel.org Fixes: 5bcae31d9cb1 ("mac80211: implement multi-vif in-place reservations") Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Kalle Valo kvalo@kernel.org Link: https://lore.kernel.org/r/20220601091926.df419d91b165.I17a9b3894ff0b8323ce2a... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/mac80211/chan.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-)

--- a/net/mac80211/chan.c +++ b/net/mac80211/chan.c @@ -1638,12 +1638,9 @@ int ieee80211_vif_use_reserved_context(s

if (new_ctx->replace_state == IEEE80211_CHANCTX_REPLACE_NONE) { if (old_ctx) - err = ieee80211_vif_use_reserved_reassign(sdata); - else - err = ieee80211_vif_use_reserved_assign(sdata); + return ieee80211_vif_use_reserved_reassign(sdata);

- if (err) - return err; + return ieee80211_vif_use_reserved_assign(sdata); }

/*

From: Zhihao Cheng chengzhihao1@huawei.com

commit 68f4c6eba70df70a720188bce95c85570ddfcc87 upstream.

Commit 505a666ee3fc ("writeback: plug writeback in wb_writeback() and writeback_inodes_wb()") has us holding a plug during wb_writeback, which may cause a potential ABBA dead lock:

wb_writeback fat_file_fsync blk_start_plug(&plug) for (;;) { iter i-1: some reqs have been added into plug->mq_list // LOCK A iter i: progress = __writeback_inodes_wb(wb, work) . writeback_sb_inodes // fat's bdev . __writeback_single_inode . . generic_writepages . . __block_write_full_page . . . . __generic_file_fsync . . . . sync_inode_metadata . . . . writeback_single_inode . . . . __writeback_single_inode . . . . fat_write_inode . . . . __fat_write_inode . . . . sync_dirty_buffer // fat's bdev . . . . lock_buffer(bh) // LOCK B . . . . submit_bh . . . . blk_mq_get_tag // LOCK A . . . trylock_buffer(bh) // LOCK B . . . redirty_page_for_writepage . . . wbc->pages_skipped++ . . --wbc->nr_to_write . wrote += write_chunk - wbc.nr_to_write // wrote > 0 . requeue_inode . redirty_tail_locked if (progress) // progress > 0 continue; iter i+1: queue_io // similar process with iter i, infinite for-loop ! } blk_finish_plug(&plug) // flush plug won't be called

Above process triggers a hungtask like: [ 399.044861] INFO: task bb:2607 blocked for more than 30 seconds. [ 399.046824] Not tainted 5.18.0-rc1-00005-gefae4d9eb6a2-dirty [ 399.051539] task:bb state:D stack: 0 pid: 2607 ppid: 2426 flags:0x00004000 [ 399.051556] Call Trace: [ 399.051570] __schedule+0x480/0x1050 [ 399.051592] schedule+0x92/0x1a0 [ 399.051602] io_schedule+0x22/0x50 [ 399.051613] blk_mq_get_tag+0x1d3/0x3c0 [ 399.051640] __blk_mq_alloc_requests+0x21d/0x3f0 [ 399.051657] blk_mq_submit_bio+0x68d/0xca0 [ 399.051674] __submit_bio+0x1b5/0x2d0 [ 399.051708] submit_bio_noacct+0x34e/0x720 [ 399.051718] submit_bio+0x3b/0x150 [ 399.051725] submit_bh_wbc+0x161/0x230 [ 399.051734] __sync_dirty_buffer+0xd1/0x420 [ 399.051744] sync_dirty_buffer+0x17/0x20 [ 399.051750] __fat_write_inode+0x289/0x310 [ 399.051766] fat_write_inode+0x2a/0xa0 [ 399.051783] __writeback_single_inode+0x53c/0x6f0 [ 399.051795] writeback_single_inode+0x145/0x200 [ 399.051803] sync_inode_metadata+0x45/0x70 [ 399.051856] __generic_file_fsync+0xa3/0x150 [ 399.051880] fat_file_fsync+0x1d/0x80 [ 399.051895] vfs_fsync_range+0x40/0xb0 [ 399.051929] __x64_sys_fsync+0x18/0x30

In my test, 'need_resched()' (which is imported by 590dca3a71 "fs-writeback: unplug before cond_resched in writeback_sb_inodes") in function 'writeback_sb_inodes()' seldom comes true, unless cond_resched() is deleted from write_cache_pages().

Fix it by correcting wrote number according number of skipped pages in writeback_sb_inodes().

Goto Link to find a reproducer.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=215837 Cc: stable@vger.kernel.org # v4.3 Signed-off-by: Zhihao Cheng chengzhihao1@huawei.com Reviewed-by: Jan Kara jack@suse.cz Reviewed-by: Christoph Hellwig hch@lst.de Link: https://lore.kernel.org/r/20220510133805.1988292-1-chengzhihao1@huawei.com Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/fs-writeback.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-)

--- a/fs/fs-writeback.c +++ b/fs/fs-writeback.c @@ -1565,11 +1565,12 @@ static long writeback_sb_inodes(struct s }; unsigned long start_time = jiffies; long write_chunk; - long wrote = 0; /* count both pages and inodes */ + long total_wrote = 0; /* count both pages and inodes */

while (!list_empty(&wb->b_io)) { struct inode *inode = wb_inode(wb->b_io.prev); struct bdi_writeback *tmp_wb; + long wrote;

if (inode->i_sb != sb) { if (work->sb) { @@ -1645,7 +1646,9 @@ static long writeback_sb_inodes(struct s

wbc_detach_inode(&wbc); work->nr_pages -= write_chunk - wbc.nr_to_write; - wrote += write_chunk - wbc.nr_to_write; + wrote = write_chunk - wbc.nr_to_write - wbc.pages_skipped; + wrote = wrote < 0 ? 0 : wrote; + total_wrote += wrote;

if (need_resched()) { /* @@ -1667,7 +1670,7 @@ static long writeback_sb_inodes(struct s tmp_wb = inode_to_wb_and_lock_list(inode); spin_lock(&inode->i_lock); if (!(inode->i_state & I_DIRTY_ALL)) - wrote++; + total_wrote++; requeue_inode(inode, tmp_wb, &wbc); inode_sync_complete(inode); spin_unlock(&inode->i_lock); @@ -1681,14 +1684,14 @@ static long writeback_sb_inodes(struct s * bail out to wb_writeback() often enough to check * background threshold and other termination conditions. */ - if (wrote) { + if (total_wrote) { if (time_is_before_jiffies(start_time + HZ / 10UL)) break; if (work->nr_pages <= 0) break; } } - return wrote; + return total_wrote; }

static long __writeback_inodes_wb(struct bdi_writeback *wb,

From: Ye Bin yebin10@huawei.com

commit ef09ed5d37b84d18562b30cf7253e57062d0db05 upstream.

we got issue as follows: EXT4-fs error (device loop0): ext4_mb_generate_buddy:1141: group 0, block bitmap and bg descriptor inconsistent: 25 vs 31513 free cls ------------[ cut here ]------------ kernel BUG at fs/ext4/inode.c:2708! invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 2 PID: 2147 Comm: rep Not tainted 5.18.0-rc2-next-20220413+ #155 RIP: 0010:ext4_writepages+0x1977/0x1c10 RSP: 0018:ffff88811d3e7880 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffff88811c098000 RDX: 0000000000000000 RSI: ffff88811c098000 RDI: 0000000000000002 RBP: ffff888128140f50 R08: ffffffffb1ff6387 R09: 0000000000000000 R10: 0000000000000007 R11: ffffed10250281ea R12: 0000000000000001 R13: 00000000000000a4 R14: ffff88811d3e7bb8 R15: ffff888128141028 FS: 00007f443aed9740(0000) GS:ffff8883aef00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020007200 CR3: 000000011c2a4000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> do_writepages+0x130/0x3a0 filemap_fdatawrite_wbc+0x83/0xa0 filemap_flush+0xab/0xe0 ext4_alloc_da_blocks+0x51/0x120 __ext4_ioctl+0x1534/0x3210 __x64_sys_ioctl+0x12c/0x170 do_syscall_64+0x3b/0x90

It may happen as follows: 1. write inline_data inode vfs_write new_sync_write ext4_file_write_iter ext4_buffered_write_iter generic_perform_write ext4_da_write_begin ext4_da_write_inline_data_begin -> If inline data size too small will allocate block to write, then mapping will has dirty page ext4_da_convert_inline_data_to_extent ->clear EXT4_STATE_MAY_INLINE_DATA 2. fallocate do_vfs_ioctl ioctl_preallocate vfs_fallocate ext4_fallocate ext4_convert_inline_data ext4_convert_inline_data_nolock ext4_map_blocks -> fail will goto restore data ext4_restore_inline_data ext4_create_inline_data ext4_write_inline_data ext4_set_inode_state -> set inode EXT4_STATE_MAY_INLINE_DATA 3. writepages __ext4_ioctl ext4_alloc_da_blocks filemap_flush filemap_fdatawrite_wbc do_writepages ext4_writepages if (ext4_has_inline_data(inode)) BUG_ON(ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA))

The root cause of this issue is we destory inline data until call ext4_writepages under delay allocation mode. But there maybe already convert from inline to extent. To solve this issue, we call filemap_flush first..

Cc: stable@kernel.org Signed-off-by: Ye Bin yebin10@huawei.com Reviewed-by: Jan Kara jack@suse.cz Link: https://lore.kernel.org/r/20220516122634.1690462-1-yebin10@huawei.com Signed-off-by: Theodore Ts'o tytso@mit.edu Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/ext4/inline.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)

--- a/fs/ext4/inline.c +++ b/fs/ext4/inline.c @@ -1995,6 +1995,18 @@ int ext4_convert_inline_data(struct inod if (!ext4_has_inline_data(inode)) { ext4_clear_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA); return 0; + } else if (!ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)) { + /* + * Inode has inline data but EXT4_STATE_MAY_INLINE_DATA is + * cleared. This means we are in the middle of moving of + * inline data to delay allocated block. Just force writeout + * here to finish conversion. + */ + error = filemap_flush(inode->i_mapping); + if (error) + return error; + if (!ext4_has_inline_data(inode)) + return 0; }

needed_blocks = ext4_writepage_trans_blocks(inode);

From: Jan Kara jack@suse.cz

commit 3ba733f879c2a88910744647e41edeefbc0d92b2 upstream.

A maliciously corrupted filesystem can contain cycles in the h-tree stored inside a directory. That can easily lead to the kernel corrupting tree nodes that were already verified under its hands while doing a node split and consequently accessing unallocated memory. Fix the problem by verifying traversed block numbers are unique.

Cc: stable@vger.kernel.org Signed-off-by: Jan Kara jack@suse.cz Link: https://lore.kernel.org/r/20220518093332.13986-2-jack@suse.cz Signed-off-by: Theodore Ts'o tytso@mit.edu Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/ext4/namei.c | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-)

--- a/fs/ext4/namei.c +++ b/fs/ext4/namei.c @@ -747,12 +747,14 @@ static struct dx_frame * dx_probe(struct ext4_filename *fname, struct inode *dir, struct dx_hash_info *hinfo, struct dx_frame *frame_in) { - unsigned count, indirect; + unsigned count, indirect, level, i; struct dx_entry *at, *entries, *p, *q, *m; struct dx_root *root; struct dx_frame *frame = frame_in; struct dx_frame *ret_err = ERR_PTR(ERR_BAD_DX_DIR); u32 hash; + ext4_lblk_t block; + ext4_lblk_t blocks[EXT4_HTREE_LEVEL];

memset(frame_in, 0, EXT4_HTREE_LEVEL * sizeof(frame_in[0])); frame->bh = ext4_read_dirblock(dir, 0, INDEX); @@ -808,6 +810,8 @@ dx_probe(struct ext4_filename *fname, st }

dxtrace(printk("Look up %x", hash)); + level = 0; + blocks[0] = 0; while (1) { count = dx_get_count(entries); if (!count || count > dx_get_limit(entries)) { @@ -849,15 +853,27 @@ dx_probe(struct ext4_filename *fname, st dx_get_block(at))); frame->entries = entries; frame->at = at; - if (!indirect--) + + block = dx_get_block(at); + for (i = 0; i <= level; i++) { + if (blocks[i] == block) { + ext4_warning_inode(dir, + "dx entry: tree cycle block %u points back to block %u", + blocks[level], block); + goto fail; + } + } + if (++level > indirect) return frame; + blocks[level] = block; frame++; - frame->bh = ext4_read_dirblock(dir, dx_get_block(at), INDEX); + frame->bh = ext4_read_dirblock(dir, block, INDEX); if (IS_ERR(frame->bh)) { ret_err = (struct dx_frame *) frame->bh; frame->bh = NULL; goto fail; } + entries = ((struct dx_node *) frame->bh->b_data)->entries;

if (dx_get_limit(entries) != dx_node_limit(dir)) {

From: Alexander Aring aahringo@redhat.com

commit 1689c169134f4b5a39156122d799b7dca76d8ddb upstream.

We always call hold_lkb(lkb) if we increment lkb->lkb_wait_count. So, we always need to call unhold_lkb(lkb) if we decrement lkb->lkb_wait_count. This patch will add missing unhold_lkb(lkb) if we decrement lkb->lkb_wait_count. In case of setting lkb->lkb_wait_count to zero we need to countdown until reaching zero and call unhold_lkb(lkb). The waiters list unhold_lkb(lkb) can be removed because it's done for the last lkb_wait_count decrement iteration as it's done in _remove_from_waiters().

This issue was discovered by a dlm gfs2 test case which use excessively dlm_unlock(LKF_CANCEL) feature. Probably the lkb->lkb_wait_count value never reached above 1 if this feature isn't used and so it was not discovered before.

The testcase ended in a rsb on the rsb keep data structure with a refcount of 1 but no lkb was associated with it, which is itself an invalid behaviour. A side effect of that was a condition in which the dlm was sending remove messages in a looping behaviour. With this patch that has not been reproduced.

Cc: stable@vger.kernel.org Signed-off-by: Alexander Aring aahringo@redhat.com Signed-off-by: David Teigland teigland@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/dlm/lock.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-)

--- a/fs/dlm/lock.c +++ b/fs/dlm/lock.c @@ -1554,6 +1554,7 @@ static int _remove_from_waiters(struct d lkb->lkb_wait_type = 0; lkb->lkb_flags &= ~DLM_IFL_OVERLAP_CANCEL; lkb->lkb_wait_count--; + unhold_lkb(lkb); goto out_del; }

@@ -1580,6 +1581,7 @@ static int _remove_from_waiters(struct d log_error(ls, "remwait error %x reply %d wait_type %d overlap", lkb->lkb_id, mstype, lkb->lkb_wait_type); lkb->lkb_wait_count--; + unhold_lkb(lkb); lkb->lkb_wait_type = 0; }

@@ -5311,11 +5313,16 @@ int dlm_recover_waiters_post(struct dlm_ lkb->lkb_flags &= ~DLM_IFL_OVERLAP_UNLOCK; lkb->lkb_flags &= ~DLM_IFL_OVERLAP_CANCEL; lkb->lkb_wait_type = 0; - lkb->lkb_wait_count = 0; + /* drop all wait_count references we still + * hold a reference for this iteration. + */ + while (lkb->lkb_wait_count) { + lkb->lkb_wait_count--; + unhold_lkb(lkb); + } mutex_lock(&ls->ls_waiters_mutex); list_del_init(&lkb->lkb_wait_reply); mutex_unlock(&ls->ls_waiters_mutex); - unhold_lkb(lkb); /* for waiters list */

if (oc || ou) { /* do an unlock or cancel instead of resending */

From: Xiaomeng Tong xiam0nd.tong@gmail.com

commit 036a45aa587a10fa2abbd50fbd0f6c4cfc44f69f upstream.

The bug is here:

p->target_id, p->target_lun);

The list iterator 'p' will point to a bogus position containing HEAD if the list is empty or no element is found. This case must be checked before any use of the iterator, otherwise it will lead to an invalid memory access.

To fix this bug, add a check. Use a new variable 'iter' as the list iterator, and use the original variable 'p' as a dedicated pointer to point to the found element.

Link: https://lore.kernel.org/r/20220414040231.2662-1-xiam0nd.tong@gmail.com Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Xiaomeng Tong xiam0nd.tong@gmail.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/scsi/dc395x.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-)

--- a/drivers/scsi/dc395x.c +++ b/drivers/scsi/dc395x.c @@ -3775,10 +3775,19 @@ static struct DeviceCtlBlk *device_alloc #endif if (dcb->target_lun != 0) { /* Copy settings */ - struct DeviceCtlBlk *p; - list_for_each_entry(p, &acb->dcb_list, list) - if (p->target_id == dcb->target_id) + struct DeviceCtlBlk *p = NULL, *iter; + + list_for_each_entry(iter, &acb->dcb_list, list) + if (iter->target_id == dcb->target_id) { + p = iter; break; + } + + if (!p) { + kfree(dcb); + return NULL; + } + dprintkdbg(DBG_1, "device_alloc: <%02i-%i> copy from <%02i-%i>\n", dcb->target_id, dcb->target_lun,

From: Dave Airlie airlied@redhat.com

commit 31ab27b14daaa75541a415c6794d6f3567fea44a upstream.

Submitting a cs with 0 chunks, causes an oops later, found trying to execute the wrong userspace driver.

MESA_LOADER_DRIVER_OVERRIDE=v3d glxinfo

[172536.665184] BUG: kernel NULL pointer dereference, address: 00000000000001d8 [172536.665188] #PF: supervisor read access in kernel mode [172536.665189] #PF: error_code(0x0000) - not-present page [172536.665191] PGD 6712a0067 P4D 6712a0067 PUD 5af9ff067 PMD 0 [172536.665195] Oops: 0000 [#1] SMP NOPTI [172536.665197] CPU: 7 PID: 2769838 Comm: glxinfo Tainted: P O 5.10.81 #1-NixOS [172536.665199] Hardware name: To be filled by O.E.M. To be filled by O.E.M./CROSSHAIR V FORMULA-Z, BIOS 2201 03/23/2015 [172536.665272] RIP: 0010:amdgpu_cs_ioctl+0x96/0x1ce0 [amdgpu] [172536.665274] Code: 75 18 00 00 4c 8b b2 88 00 00 00 8b 46 08 48 89 54 24 68 49 89 f7 4c 89 5c 24 60 31 d2 4c 89 74 24 30 85 c0 0f 85 c0 01 00 00 <48> 83 ba d8 01 00 00 00 48 8b b4 24 90 00 00 00 74 16 48 8b 46 10 [172536.665276] RSP: 0018:ffffb47c0e81bbe0 EFLAGS: 00010246 [172536.665277] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 [172536.665278] RDX: 0000000000000000 RSI: ffffb47c0e81be28 RDI: ffffb47c0e81bd68 [172536.665279] RBP: ffff936524080010 R08: 0000000000000000 R09: ffffb47c0e81be38 [172536.665281] R10: ffff936524080010 R11: ffff936524080000 R12: ffffb47c0e81bc40 [172536.665282] R13: ffffb47c0e81be28 R14: ffff9367bc410000 R15: ffffb47c0e81be28 [172536.665283] FS: 00007fe35e05d740(0000) GS:ffff936c1edc0000(0000) knlGS:0000000000000000 [172536.665284] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [172536.665286] CR2: 00000000000001d8 CR3: 0000000532e46000 CR4: 00000000000406e0 [172536.665287] Call Trace: [172536.665322] ? amdgpu_cs_find_mapping+0x110/0x110 [amdgpu] [172536.665332] drm_ioctl_kernel+0xaa/0xf0 [drm] [172536.665338] drm_ioctl+0x201/0x3b0 [drm] [172536.665369] ? amdgpu_cs_find_mapping+0x110/0x110 [amdgpu] [172536.665372] ? selinux_file_ioctl+0x135/0x230 [172536.665399] amdgpu_drm_ioctl+0x49/0x80 [amdgpu] [172536.665403] __x64_sys_ioctl+0x83/0xb0 [172536.665406] do_syscall_64+0x33/0x40 [172536.665409] entry_SYSCALL_64_after_hwframe+0x44/0xa9

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2018 Signed-off-by: Dave Airlie airlied@redhat.com Cc: stable@vger.kernel.org Reviewed-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_cs.c @@ -84,7 +84,7 @@ static int amdgpu_cs_parser_init(struct int ret;

if (cs->in.num_chunks == 0) - return 0; + return -EINVAL;

chunk_array = kmalloc_array(cs->in.num_chunks, sizeof(uint64_t), GFP_KERNEL); if (!chunk_array)

From: Brian Norris briannorris@chromium.org

commit 8fb6c44fe8468f92ac7b8bbfcca4404a4e88645f upstream.

If the display is not enable()d, then we aren't holding a runtime PM reference here. Thus, it's easy to accidentally cause a hang, if user space is poking around at /dev/drm_dp_aux0 at the "wrong" time.

Let's get a runtime PM reference, and check that we "see" the panel. Don't force any panel power-up, etc., because that can be intrusive, and that's not what other drivers do (see drivers/gpu/drm/bridge/ti-sn65dsi86.c and drivers/gpu/drm/bridge/parade-ps8640.c.)

Fixes: 0d97ad03f422 ("drm/bridge: analogix_dp: Remove duplicated code") Cc: stable@vger.kernel.org Cc: Tomeu Vizoso tomeu.vizoso@collabora.com Signed-off-by: Brian Norris briannorris@chromium.org Reviewed-by: Douglas Anderson dianders@chromium.org Signed-off-by: Douglas Anderson dianders@chromium.org Link: https://patchwork.freedesktop.org/patch/msgid/20220301181107.v4.1.I773a08785... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-)

--- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c @@ -1279,8 +1279,19 @@ static ssize_t analogix_dpaux_transfer(s struct drm_dp_aux_msg *msg) { struct analogix_dp_device *dp = to_dp(aux); + int ret;

- return analogix_dp_transfer(dp, msg); + pm_runtime_get_sync(dp->dev); + + ret = analogix_dp_detect_hpd(dp); + if (ret) + goto out; + + ret = analogix_dp_transfer(dp, msg); +out: + pm_runtime_put(dp->dev); + + return ret; }

int analogix_dp_bind(struct device *dev, struct drm_device *drm_dev,

From: Xiaomeng Tong xiam0nd.tong@gmail.com

commit 64c54d9244a4efe9bc6e9c98e13c4bbb8bb39083 upstream.

The bug is here: if (!rdev || rdev->desc_nr != nr) {

The list iterator value 'rdev' will *always* be set and non-NULL by rdev_for_each_rcu(), so it is incorrect to assume that the iterator value will be NULL if the list is empty or no element found (In fact, it will be a bogus pointer to an invalid struct object containing the HEAD). Otherwise it will bypass the check and lead to invalid memory access passing the check.

To fix the bug, use a new variable 'iter' as the list iterator, while using the original variable 'pdev' as a dedicated pointer to point to the found element.

Cc: stable@vger.kernel.org Fixes: 70bcecdb1534 ("md-cluster: Improve md_reload_sb to be less error prone") Signed-off-by: Xiaomeng Tong xiam0nd.tong@gmail.com Signed-off-by: Song Liu song@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/md/md.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-)

--- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -9266,16 +9266,18 @@ static int read_rdev(struct mddev *mddev

void md_reload_sb(struct mddev *mddev, int nr) { - struct md_rdev *rdev; + struct md_rdev *rdev = NULL, *iter; int err;

/* Find the rdev */ - rdev_for_each_rcu(rdev, mddev) { - if (rdev->desc_nr == nr) + rdev_for_each_rcu(iter, mddev) { + if (iter->desc_nr == nr) { + rdev = iter; break; + } }

- if (!rdev || rdev->desc_nr != nr) { + if (!rdev) { pr_warn("%s: %d Could not find rdev with nr %d\n", __func__, __LINE__, nr); return; }

From: Pali Rohár pali@kernel.org

commit a3d66a76348daf559873f19afc912a2a7c2ccdaf upstream.

Register ARMADA_370_XP_INT_FABRIC_MASK_OFFS is Armada 370 and XP specific and on new Armada platforms it has different meaning. It does not configure Performance Counter Overflow interrupt masking. So do not touch this register on non-A370/XP platforms (A375, A38x and A39x).

Signed-off-by: Pali Rohár pali@kernel.org Cc: stable@vger.kernel.org Fixes: 28da06dfd9e4 ("irqchip: armada-370-xp: Enable the PMU interrupts") Reviewed-by: Andrew Lunn andrew@lunn.ch Signed-off-by: Marc Zyngier maz@kernel.org Link: https://lore.kernel.org/r/20220425113706.29310-1-pali@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/irqchip/irq-armada-370-xp.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-)

--- a/drivers/irqchip/irq-armada-370-xp.c +++ b/drivers/irqchip/irq-armada-370-xp.c @@ -392,7 +392,16 @@ static void armada_xp_mpic_smp_cpu_init(

static void armada_xp_mpic_perf_init(void) { - unsigned long cpuid = cpu_logical_map(smp_processor_id()); + unsigned long cpuid; + + /* + * This Performance Counter Overflow interrupt is specific for + * Armada 370 and XP. It is not available on Armada 375, 38x and 39x. + */ + if (!of_machine_is_compatible("marvell,armada-370-xp")) + return; + + cpuid = cpu_logical_map(smp_processor_id());

/* Enable Performance Counter Overflow interrupts */ writel(ARMADA_370_XP_INT_CAUSE_PERF(cpuid),

From: Felix Fietkau nbd@nbd.name

commit b041b7b9de6e1d4362de855ab90f9d03ef323edd upstream.

In client mode, we can't connect to hidden SSID APs or SSIDs not advertised in beacons on DFS channels, since we're forced to passive scan. Fix this by sending out a probe request immediately after the first beacon, if active scan was requested by the user.

Cc: stable@vger.kernel.org Reported-by: Catrinel Catrinescu cc@80211.de Signed-off-by: Felix Fietkau nbd@nbd.name Link: https://lore.kernel.org/r/20220420104907.36275-1-nbd@nbd.name Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/mac80211/ieee80211_i.h | 5 +++++ net/mac80211/scan.c | 20 ++++++++++++++++++++ 2 files changed, 25 insertions(+)

--- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1067,6 +1067,9 @@ struct tpt_led_trigger { * a scan complete for an aborted scan. * @SCAN_HW_CANCELLED: Set for our scan work function when the scan is being * cancelled. + * @SCAN_BEACON_WAIT: Set whenever we're passive scanning because of radar/no-IR + * and could send a probe request after receiving a beacon. + * @SCAN_BEACON_DONE: Beacon received, we can now send a probe request */ enum { SCAN_SW_SCANNING, @@ -1075,6 +1078,8 @@ enum { SCAN_COMPLETED, SCAN_ABORTED, SCAN_HW_CANCELLED, + SCAN_BEACON_WAIT, + SCAN_BEACON_DONE, };

/** --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -205,6 +205,16 @@ void ieee80211_scan_rx(struct ieee80211_ if (likely(!sdata1 && !sdata2)) return;

+ if (test_and_clear_bit(SCAN_BEACON_WAIT, &local->scanning)) { + /* + * we were passive scanning because of radar/no-IR, but + * the beacon/proberesp rx gives us an opportunity to upgrade + * to active scan + */ + set_bit(SCAN_BEACON_DONE, &local->scanning); + ieee80211_queue_delayed_work(&local->hw, &local->scan_work, 0); + } + if (ieee80211_is_probe_resp(mgmt->frame_control)) { struct cfg80211_scan_request *scan_req; struct cfg80211_sched_scan_request *sched_scan_req; @@ -646,6 +656,8 @@ static int __ieee80211_start_scan(struct IEEE80211_CHAN_RADAR)) || !req->n_ssids) { next_delay = IEEE80211_PASSIVE_CHANNEL_TIME; + if (req->n_ssids) + set_bit(SCAN_BEACON_WAIT, &local->scanning); } else { ieee80211_scan_state_send_probe(local, &next_delay); next_delay = IEEE80211_CHANNEL_TIME; @@ -826,6 +838,8 @@ static void ieee80211_scan_state_set_cha !scan_req->n_ssids) { *next_delay = IEEE80211_PASSIVE_CHANNEL_TIME; local->next_scan_state = SCAN_DECISION; + if (scan_req->n_ssids) + set_bit(SCAN_BEACON_WAIT, &local->scanning); return; }

@@ -918,6 +932,8 @@ void ieee80211_scan_work(struct work_str goto out; }

+ clear_bit(SCAN_BEACON_WAIT, &local->scanning); + /* * as long as no delay is required advance immediately * without scheduling a new work @@ -928,6 +944,10 @@ void ieee80211_scan_work(struct work_str goto out_complete; }

+ if (test_and_clear_bit(SCAN_BEACON_DONE, &local->scanning) && + local->next_scan_state == SCAN_DECISION) + local->next_scan_state = SCAN_SEND_PROBE; + switch (local->next_scan_state) { case SCAN_DECISION: /* if no more bands/channels left, complete scan */

From: Vincent Whitchurch vincent.whitchurch@axis.com

commit 2a4a62a14be1947fa945c5c11ebf67326381a568 upstream.

syscall_stub_data() expects the data_count parameter to be the number of longs, not bytes.

================================================================== BUG: KASAN: stack-out-of-bounds in syscall_stub_data+0x70/0xe0 Read of size 128 at addr 000000006411f6f0 by task swapper/1

CPU: 0 PID: 1 Comm: swapper Not tainted 5.18.0+ #18 Call Trace: show_stack.cold+0x166/0x2a7 __dump_stack+0x3a/0x43 dump_stack_lvl+0x1f/0x27 print_report.cold+0xdb/0xf81 kasan_report+0x119/0x1f0 kasan_check_range+0x3a3/0x440 memcpy+0x52/0x140 syscall_stub_data+0x70/0xe0 write_ldt_entry+0xac/0x190 init_new_ldt+0x515/0x960 init_new_context+0x2c4/0x4d0 mm_init.constprop.0+0x5ed/0x760 mm_alloc+0x118/0x170 0x60033f48 do_one_initcall+0x1d7/0x860 0x60003e7b kernel_init+0x6e/0x3d4 new_thread_handler+0x1e7/0x2c0

The buggy address belongs to stack of task swapper/1 and is located at offset 64 in frame: init_new_ldt+0x0/0x960

This frame has 2 objects: [32, 40) 'addr' [64, 80) 'desc' ==================================================================

Fixes: 858259cf7d1c443c83 ("uml: maintain own LDT entries") Signed-off-by: Vincent Whitchurch vincent.whitchurch@axis.com Cc: stable@vger.kernel.org Signed-off-by: Richard Weinberger richard@nod.at Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/x86/um/ldt.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/arch/x86/um/ldt.c +++ b/arch/x86/um/ldt.c @@ -23,9 +23,11 @@ static long write_ldt_entry(struct mm_id { long res; void *stub_addr; + + BUILD_BUG_ON(sizeof(*desc) % sizeof(long)); + res = syscall_stub_data(mm_idp, (unsigned long *)desc, - (sizeof(*desc) + sizeof(long) - 1) & - ~(sizeof(long) - 1), + sizeof(*desc) / sizeof(long), addr, &stub_addr); if (!res) { unsigned long args[] = { func,

From: Christophe de Dinechin dinechin@redhat.com

commit 37462a920392cb86541650a6f4121155f11f1199 upstream.

With gcc version 12.0.1 20220401 (Red Hat 12.0.1-0), building with defconfig results in the following compilation error:

| CC mm/swapfile.o | mm/swapfile.c: In function `setup_swap_info': | mm/swapfile.c:2291:47: error: array subscript -1 is below array bounds | of `struct plist_node[]' [-Werror=array-bounds] | 2291 | p->avail_lists[i].prio = 1; | | ~~~~~~~~~~~~~~^~~ | In file included from mm/swapfile.c:16: | ./include/linux/swap.h:292:27: note: while referencing `avail_lists' | 292 | struct plist_node avail_lists[]; /* | | ^~~~~~~~~~~

This is due to the compiler detecting that the mask in node_states[__state] could theoretically be zero, which would lead to first_node() returning -1 through find_first_bit.

I believe that the warning/error is legitimate. I first tried adding a test to check that the node mask is not emtpy, since a similar test exists in the case where MAX_NUMNODES == 1.

However, adding the if statement causes other warnings to appear in for_each_cpu_node_but, because it introduces a dangling else ambiguity. And unfortunately, GCC is not smart enough to detect that the added test makes the case where (node) == -1 impossible, so it still complains with the same message.

This is why I settled on replacing that with a harmless, but relatively useless (node) >= 0 test. Based on the warning for the dangling else, I also decided to fix the case where MAX_NUMNODES == 1 by moving the condition inside the for loop. It will still only be tested once. This ensures that the meaning of an else following for_each_node_mask or derivatives would not silently have a different meaning depending on the configuration.

Link: https://lkml.kernel.org/r/20220414150855.2407137-3-dinechin@redhat.com Signed-off-by: Christophe de Dinechin christophe@dinechin.org Signed-off-by: Christophe de Dinechin dinechin@redhat.com Reviewed-by: Andrew Morton akpm@linux-foundation.org Cc: Ben Segall bsegall@google.com Cc: "Michael S. Tsirkin" mst@redhat.com Cc: Steven Rostedt rostedt@goodmis.org Cc: Ingo Molnar mingo@redhat.com Cc: Mel Gorman mgorman@suse.de Cc: Dietmar Eggemann dietmar.eggemann@arm.com Cc: Vincent Guittot vincent.guittot@linaro.org Cc: Paolo Bonzini pbonzini@redhat.com Cc: Daniel Bristot de Oliveira bristot@redhat.com Cc: Jason Wang jasowang@redhat.com Cc: Zhen Lei thunder.leizhen@huawei.com Cc: Juri Lelli juri.lelli@redhat.com Cc: Peter Zijlstra peterz@infradead.org Cc: stable@vger.kernel.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- include/linux/nodemask.h | 13 ++++++------- 1 file changed, 6 insertions(+), 7 deletions(-)

--- a/include/linux/nodemask.h +++ b/include/linux/nodemask.h @@ -366,14 +366,13 @@ static inline void __nodes_fold(nodemask }

#if MAX_NUMNODES > 1 -#define for_each_node_mask(node, mask) \ - for ((node) = first_node(mask); \ - (node) < MAX_NUMNODES; \ - (node) = next_node((node), (mask))) +#define for_each_node_mask(node, mask) \ + for ((node) = first_node(mask); \ + (node >= 0) && (node) < MAX_NUMNODES; \ + (node) = next_node((node), (mask))) #else /* MAX_NUMNODES == 1 */ -#define for_each_node_mask(node, mask) \ - if (!nodes_empty(mask)) \ - for ((node) = 0; (node) < 1; (node)++) +#define for_each_node_mask(node, mask) \ + for ((node) = 0; (node) < 1 && !nodes_empty(mask); (node)++) #endif /* MAX_NUMNODES */

/*

From: Alexander Wetzel alexander@wetzel-home.de

commit 746285cf81dc19502ab238249d75f5990bd2d231 upstream.

Using not existing queues can panic the kernel with rtl8180/rtl8185 cards. Ignore the skb priority for those cards, they only have one tx queue. Pierre Asselin (pa@panix.com) reported the kernel crash in the Gentoo forum:

https://forums.gentoo.org/viewtopic-t-1147832-postdays-0-postorder-asc-start...

He also confirmed that this patch fixes the issue. In summary this happened:

After updating wpa_supplicant from 2.9 to 2.10 the kernel crashed with a "divide error: 0000" when connecting to an AP. Control port tx now tries to use IEEE80211_AC_VO for the priority, which wpa_supplicants starts to use in 2.10.

Since only the rtl8187se part of the driver supports QoS, the priority of the skb is set to IEEE80211_AC_BE (2) by mac80211 for rtl8180/rtl8185 cards.

rtl8180 is then unconditionally reading out the priority and finally crashes on drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c line 544 without this patch: idx = (ring->idx + skb_queue_len(&ring->queue)) % ring->entries

"ring->entries" is zero for rtl8180/rtl8185 cards, tx_ring[2] never got initialized.

Cc: stable@vger.kernel.org Reported-by: pa@panix.com Tested-by: pa@panix.com Signed-off-by: Alexander Wetzel alexander@wetzel-home.de Signed-off-by: Kalle Valo kvalo@kernel.org Link: https://lore.kernel.org/r/20220422145228.7567-1-alexander@wetzel-home.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c +++ b/drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c @@ -460,8 +460,10 @@ static void rtl8180_tx(struct ieee80211_ struct rtl8180_priv *priv = dev->priv; struct rtl8180_tx_ring *ring; struct rtl8180_tx_desc *entry; + unsigned int prio = 0; unsigned long flags; - unsigned int idx, prio, hw_prio; + unsigned int idx, hw_prio; + dma_addr_t mapping; u32 tx_flags; u8 rc_flags; @@ -470,7 +472,9 @@ static void rtl8180_tx(struct ieee80211_ /* do arithmetic and then convert to le16 */ u16 frame_duration = 0;

- prio = skb_get_queue_mapping(skb); + /* rtl8180/rtl8185 only has one useable tx queue */ + if (dev->queues > IEEE80211_AC_BK) + prio = skb_get_queue_mapping(skb); ring = &priv->tx_ring[prio];

mapping = pci_map_single(priv->pdev, skb->data,

From: Xiaomeng Tong xiam0nd.tong@gmail.com

commit 54a6f29522da3c914da30e50721dedf51046449a upstream.

If the previous list_for_each_entry_continue_rcu() don't exit early (no goto hit inside the loop), the iterator 'cvif' after the loop will be a bogus pointer to an invalid structure object containing the HEAD (&ar->vif_list). As a result, the use of 'cvif' after that will lead to a invalid memory access (i.e., 'cvif->id': the invalid pointer dereference when return back to/after the callsite in the carl9170_update_beacon()).

The original intention should have been to return the valid 'cvif' when found in list, NULL otherwise. So just return NULL when no entry found, to fix this bug.

Cc: stable@vger.kernel.org Fixes: 1f1d9654e183c ("carl9170: refactor carl9170_update_beacon") Signed-off-by: Xiaomeng Tong xiam0nd.tong@gmail.com Acked-by: Christian Lamparter chunkeey@gmail.com Signed-off-by: Kalle Valo quic_kvalo@quicinc.com Link: https://lore.kernel.org/r/20220328122820.1004-1-xiam0nd.tong@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/wireless/ath/carl9170/tx.c | 3 +++ 1 file changed, 3 insertions(+)

--- a/drivers/net/wireless/ath/carl9170/tx.c +++ b/drivers/net/wireless/ath/carl9170/tx.c @@ -1554,6 +1554,9 @@ static struct carl9170_vif_info *carl917 goto out; } } while (ar->beacon_enabled && i--); + + /* no entry found in list */ + return NULL; }

out:

From: Kathiravan T quic_kathirav@quicinc.com

commit f607dd767f5d6800ffbdce5b99ba81763b023781 upstream.

Sleep clock frequency should be 32768Hz. Lets fix it.

Cc: stable@vger.kernel.org Fixes: 41dac73e243d ("arm64: dts: Add ipq8074 SoC and HK01 board support") Link: https://lore.kernel.org/all/e2a447f8-6024-0369-f698-2027b6edcf9e@codeaurora.... Signed-off-by: Kathiravan T quic_kathirav@quicinc.com Signed-off-by: Bjorn Andersson bjorn.andersson@linaro.org Link: https://lore.kernel.org/r/1644581655-11568-1-git-send-email-quic_kathirav@qu... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/arm64/boot/dts/qcom/ipq8074.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi @@ -181,7 +181,7 @@ clocks { sleep_clk: sleep_clk { compatible = "fixed-clock"; - clock-frequency = <32000>; + clock-frequency = <32768>; #clock-cells = <0>; };

From: Akira Yokosawa akiyks@gmail.com

commit 627f01eab93d8671d4e4afee9b148f9998d20e7c upstream.

One of the changes in Sphinx 5.0.0 [1] says [sic]:

5.0.0 final

- #10474: language does not accept None as it value. The default value of language becomes to 'en' now.

[1]: https://www.sphinx-doc.org/en/master/changes.html#release-5-0-0-released-may...

It results in a new warning from Sphinx 5.0.0 [sic]:

WARNING: Invalid configuration value found: 'language = None'. Update your configuration to a valid langauge code. Falling back to 'en' (English).

Silence the warning by using 'en'. It works with all the Sphinx versions required for building kernel documentation (1.7.9 or later).

Signed-off-by: Akira Yokosawa akiyks@gmail.com Link: https://lore.kernel.org/r/bd0c2ddc-2401-03cb-4526-79ca664e1cbe@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Jonathan Corbet corbet@lwn.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- Documentation/conf.py | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/Documentation/conf.py +++ b/Documentation/conf.py @@ -96,7 +96,7 @@ finally: # # This is also used if you do content translation via gettext catalogs. # Usually you set "language" from the command line for these cases. -language = None +language = 'en'

# There are two options for replacing |today|: either, you set today to some # non-false value, then it is used:

From: Johan Hovold johan+linaro@kernel.org

commit 4d2900f20edfe541f75756a00deeb2ffe7c66bc1 upstream.

Make sure to release the lane reset controller in case of a late probe error (e.g. probe deferral).

Note that due to the reset controller being defined in devicetree in "lane" child nodes, devm_reset_control_get_exclusive() cannot be used directly.

Fixes: e78f3d15e115 ("phy: qcom-qmp: new qmp phy driver for qcom-chipsets") Cc: stable@vger.kernel.org # 4.12 Cc: Vivek Gautam vivek.gautam@codeaurora.org Reviewed-by: Philipp Zabel p.zabel@pengutronix.de Signed-off-by: Johan Hovold johan+linaro@kernel.org Reviewed-by: Bjorn Andersson bjorn.andersson@linaro.org Link: https://lore.kernel.org/r/20220427063243.32576-3-johan+linaro@kernel.org Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/phy/qualcomm/phy-qcom-qmp.c | 9 +++++++++ 1 file changed, 9 insertions(+)

--- a/drivers/phy/qualcomm/phy-qcom-qmp.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp.c @@ -1086,6 +1086,11 @@ static const struct phy_ops qcom_qmp_phy .owner = THIS_MODULE, };

+static void qcom_qmp_reset_control_put(void *data) +{ + reset_control_put(data); +} + static int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id) { @@ -1145,6 +1150,10 @@ int qcom_qmp_phy_create(struct device *d dev_err(dev, "failed to get lane%d reset\n", id); return PTR_ERR(qphy->lane_rst); } + ret = devm_add_action_or_reset(dev, qcom_qmp_reset_control_put, + qphy->lane_rst); + if (ret) + return ret; }

generic_phy = devm_phy_create(dev, np, &qcom_qmp_phy_gen_ops);

From: Maciej W. Rozycki macro@orcam.me.uk

commit 424c3781dd1cb401857585331eaaa425a13f2429 upstream.

Remove unsupported forcing of `cpu_has_fpu' to 1, which makes the `nofpu' kernel parameter non-functional, and also causes a link error:

ld: arch/mips/kernel/traps.o: in function `trap_init': ./arch/mips/include/asm/msa.h:(.init.text+0x348): undefined reference to `handle_fpe' ld: ./arch/mips/include/asm/msa.h:(.init.text+0x354): undefined reference to `handle_fpe' ld: ./arch/mips/include/asm/msa.h:(.init.text+0x360): undefined reference to `handle_fpe'

where the CONFIG_MIPS_FP_SUPPORT configuration option has been disabled.

Signed-off-by: Maciej W. Rozycki macro@orcam.me.uk Reported-by: Stephen Zhang starzhangzsd@gmail.com Fixes: 0ebb2f4159af ("MIPS: IP27: Update/restructure CPU overrides") Cc: stable@vger.kernel.org # v4.2+ Signed-off-by: Thomas Bogendoerfer tsbogend@alpha.franken.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/mips/include/asm/mach-ip27/cpu-feature-overrides.h | 1 - 1 file changed, 1 deletion(-)

--- a/arch/mips/include/asm/mach-ip27/cpu-feature-overrides.h +++ b/arch/mips/include/asm/mach-ip27/cpu-feature-overrides.h @@ -28,7 +28,6 @@ #define cpu_has_6k_cache 0 #define cpu_has_8k_cache 0 #define cpu_has_tx39_cache 0 -#define cpu_has_fpu 1 #define cpu_has_nofpuex 0 #define cpu_has_32fpr 1 #define cpu_has_counter 1

From: Randy Dunlap rdunlap@infradead.org

[ Upstream commit 3928cf08334ed895a31458cbebd8d4ec6d84c080 ]

When the MIPS_ALCHEMY board selection is MIPS_XXS1500 instead of MIPS_DB1XXX, the PCMCIA driver 'db1xxx_ss' has build errors due to missing DB1XXX symbols. The PCMCIA driver should be restricted to MIPS_DB1XXX instead of MIPS_ALCHEMY to fix this build error.

ERROR: modpost: "bcsr_read" [drivers/pcmcia/db1xxx_ss.ko] undefined! ERROR: modpost: "bcsr_mod" [drivers/pcmcia/db1xxx_ss.ko] undefined!

Fixes: 42a4f17dc356 ("MIPS: Alchemy: remove SOC_AU1X00 in favor of MIPS_ALCHEMY") Signed-off-by: Randy Dunlap rdunlap@infradead.org Reported-by: kernel test robot lkp@intel.com Cc: Arnd Bergmann arnd@arndb.de Cc: Daniel Vetter daniel.vetter@ffwll.ch Cc: Kees Cook keescook@chromium.org Cc: Thomas Bogendoerfer tsbogend@alpha.franken.de Cc: linux-mips@vger.kernel.org Acked-by: Manuel Lauss manuel.lauss@gmail.com Signed-off-by: Dominik Brodowski linux@dominikbrodowski.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pcmcia/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig index d3c378b4db6c..20d85d564b80 100644 --- a/drivers/pcmcia/Kconfig +++ b/drivers/pcmcia/Kconfig @@ -146,7 +146,7 @@ config TCIC

config PCMCIA_ALCHEMY_DEVBOARD tristate "Alchemy Db/Pb1xxx PCMCIA socket services" - depends on MIPS_ALCHEMY && PCMCIA + depends on MIPS_DB1XXX && PCMCIA help Enable this driver of you want PCMCIA support on your Alchemy Db1000, Db/Pb1100, Db/Pb1500, Db/Pb1550, Db/Pb1200, DB1300

From: Wang Weiyang wangweiyang2@huawei.com

[ Upstream commit 507b05063d1b7a1fcb9f7d7c47586fc4f3508f98 ]

In goldfish_tty_probe(), the port initialized through tty_port_init() should be destroyed in error paths.In goldfish_tty_remove(), qtty->port also should be destroyed or else might leak resources.

Fix the above by calling tty_port_destroy().

Fixes: 666b7793d4bf ("goldfish: tty driver") Reviewed-by: Jiri Slaby jirislaby@kernel.org Signed-off-by: Wang Weiyang wangweiyang2@huawei.com Link: https://lore.kernel.org/r/20220328115844.86032-1-wangweiyang2@huawei.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/tty/goldfish.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/drivers/tty/goldfish.c b/drivers/tty/goldfish.c index 85a500ddbcaa..1b72321f2d0b 100644 --- a/drivers/tty/goldfish.c +++ b/drivers/tty/goldfish.c @@ -414,6 +414,7 @@ static int goldfish_tty_probe(struct platform_device *pdev) err_tty_register_device_failed: free_irq(irq, qtty); err_dec_line_count: + tty_port_destroy(&qtty->port); goldfish_tty_current_line_count--; if (goldfish_tty_current_line_count == 0) goldfish_tty_delete_driver(); @@ -435,6 +436,7 @@ static int goldfish_tty_remove(struct platform_device *pdev) iounmap(qtty->base); qtty->base = NULL; free_irq(qtty->irq, pdev); + tty_port_destroy(&qtty->port); goldfish_tty_current_line_count--; if (goldfish_tty_current_line_count == 0) goldfish_tty_delete_driver();

From: Niels Dossche dossche.niels@gmail.com

[ Upstream commit d088fabace2ca337b275d1d4b36db4fe7771e44f ]

The function documentation of usb_set_configuration says that its callers should hold the device lock. This lock is held for all callsites except tweak_set_configuration_cmd. The code path can be executed for example when attaching a remote USB device. The solution is to surround the call by the device lock.

This bug was found using my experimental own-developed static analysis tool, which reported the missing lock on v5.17.2. I manually verified this bug report by doing code review as well. I runtime checked that the required lock is not held. I compiled and runtime tested this on x86_64 with a USB mouse. After applying this patch, my analyser no longer reports this potential bug.

Fixes: 2c8c98158946 ("staging: usbip: let client choose device configuration") Reviewed-by: Shuah Khan skhan@linuxfoundation.org Signed-off-by: Niels Dossche dossche.niels@gmail.com Link: https://lore.kernel.org/r/20220412165055.257113-1-dossche.niels@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/usbip/stub_rx.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/drivers/usb/usbip/stub_rx.c b/drivers/usb/usbip/stub_rx.c index cb24b22252e4..bf4a6dca95c6 100644 --- a/drivers/usb/usbip/stub_rx.c +++ b/drivers/usb/usbip/stub_rx.c @@ -152,7 +152,9 @@ static int tweak_set_configuration_cmd(struct urb *urb) req = (struct usb_ctrlrequest *) urb->setup_packet; config = le16_to_cpu(req->wValue);

+ usb_lock_device(sdev->udev); err = usb_set_configuration(sdev->udev, config); + usb_unlock_device(sdev->udev); if (err && err != -ENODEV) dev_err(&sdev->udev->dev, "can't set config #%d, error %d\n", config, err);

From: Uwe Kleine-König u.kleine-koenig@pengutronix.de

[ Upstream commit 5e3b07ca5cc78cd4a987e78446849e41288d87cb ]

The hardware only supports periods <= 1.6 ms and if a bigger period is requested it is clamped to 1.6 ms. In this case duty_cycle might be bigger than 1.6 ms and then the duty cycle register is written with a value bigger than LP3943_MAX_DUTY. So clamp duty_cycle accordingly.

Fixes: af66b3c0934e ("pwm: Add LP3943 PWM driver") Signed-off-by: Uwe Kleine-König u.kleine-koenig@pengutronix.de Signed-off-by: Thierry Reding thierry.reding@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pwm/pwm-lp3943.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/pwm/pwm-lp3943.c b/drivers/pwm/pwm-lp3943.c index fc446d5c19f9..34151fc4cd51 100644 --- a/drivers/pwm/pwm-lp3943.c +++ b/drivers/pwm/pwm-lp3943.c @@ -128,6 +128,7 @@ static int lp3943_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, if (err) return err;

+ duty_ns = min(duty_ns, period_ns); val = (u8)(duty_ns * LP3943_MAX_DUTY / period_ns);

return lp3943_write_byte(lp3943, reg_duty, val);

From: Guilherme G. Piccoli gpiccoli@igalia.com

[ Upstream commit 1adff542d67a2ed1120955cb219bfff8a9c53f59 ]

The panic notifier infrastructure executes registered callbacks when a panic event happens - such callbacks are executed in atomic context, with interrupts and preemption disabled in the running CPU and all other CPUs disabled. That said, mutexes in such context are not a good idea.

This patch replaces a regular mutex with a mutex_trylock safer approach; given the nature of the mutex used in the driver, it should be pretty uncommon being unable to acquire such mutex in the panic path, hence no functional change should be observed (and if it is, that would be likely a deadlock with the regular mutex).

Fixes: 2227b7c74634 ("coresight: add support for CPU debug module") Cc: Leo Yan leo.yan@linaro.org Cc: Mathieu Poirier mathieu.poirier@linaro.org Cc: Mike Leach mike.leach@linaro.org Cc: Suzuki K Poulose suzuki.poulose@arm.com Signed-off-by: Guilherme G. Piccoli gpiccoli@igalia.com Reviewed-by: Suzuki K Poulose suzuki.poulose@arm.com Signed-off-by: Suzuki K Poulose suzuki.poulose@arm.com Link: https://lore.kernel.org/r/20220427224924.592546-10-gpiccoli@igalia.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hwtracing/coresight/coresight-cpu-debug.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/hwtracing/coresight/coresight-cpu-debug.c b/drivers/hwtracing/coresight/coresight-cpu-debug.c index 2f6f46ea68e9..ccd59ba26609 100644 --- a/drivers/hwtracing/coresight/coresight-cpu-debug.c +++ b/drivers/hwtracing/coresight/coresight-cpu-debug.c @@ -391,9 +391,10 @@ static int debug_notifier_call(struct notifier_block *self, int cpu; struct debug_drvdata *drvdata;

- mutex_lock(&debug_lock); + /* Bail out if we can't acquire the mutex or the functionality is off */ + if (!mutex_trylock(&debug_lock)) + return NOTIFY_DONE;

- /* Bail out if the functionality is disabled */ if (!debug_enable) goto skip_dump;

@@ -412,7 +413,7 @@ static int debug_notifier_call(struct notifier_block *self,

skip_dump: mutex_unlock(&debug_lock); - return 0; + return NOTIFY_DONE; }

static struct notifier_block debug_notifier = {

From: Yang Yingliang yangyingliang@huawei.com

[ Upstream commit d3b43eb505bffb8e4cdf6800c15660c001553fe6 ]

It will cause null-ptr-deref if platform_get_resource() returns NULL, we need check the return value.

Fixes: fc2979118f3f ("rtc: mediatek: Add MT6397 RTC driver") Signed-off-by: Yang Yingliang yangyingliang@huawei.com Reviewed-by: AngeloGioacchino Del Regno angelogioacchino.delregno@collabora.com Signed-off-by: Alexandre Belloni alexandre.belloni@bootlin.com Link: https://lore.kernel.org/r/20220505125043.1594771-1-yangyingliang@huawei.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/rtc/rtc-mt6397.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/drivers/rtc/rtc-mt6397.c b/drivers/rtc/rtc-mt6397.c index c696d9186451..4fdd96f71e11 100644 --- a/drivers/rtc/rtc-mt6397.c +++ b/drivers/rtc/rtc-mt6397.c @@ -339,6 +339,8 @@ static int mtk_rtc_probe(struct platform_device *pdev) return -ENOMEM;

res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -EINVAL; rtc->addr_base = res->start;

res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);

From: Ilpo Järvinen ilpo.jarvinen@linux.intel.com

[ Upstream commit fd63031b8c0763addcecdefe0e0c59d49646204e ]

Only CS7 and CS8 seem supported but CSIZE is not sanitized to CS8 in the default: block.

Set CSIZE correctly so that userspace knows the effective value. Incorrect CSIZE also results in miscalculation of the frame bits in tty_get_char_size() or in its predecessor where the roughly the same code is directly within uart_update_timeout().

Fixes: 5930cb3511df (serial: driver for Conexant Digicolor USART) Acked-by: Baruch Siach baruch@tkos.co.il Signed-off-by: Ilpo Järvinen ilpo.jarvinen@linux.intel.com Link: https://lore.kernel.org/r/20220519081808.3776-3-ilpo.jarvinen@linux.intel.co... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/tty/serial/digicolor-usart.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/drivers/tty/serial/digicolor-usart.c b/drivers/tty/serial/digicolor-usart.c index 794864fac625..74127813e6db 100644 --- a/drivers/tty/serial/digicolor-usart.c +++ b/drivers/tty/serial/digicolor-usart.c @@ -313,6 +313,8 @@ static void digicolor_uart_set_termios(struct uart_port *port, case CS8: default: config |= UA_CONFIG_CHAR_LEN; + termios->c_cflag &= ~CSIZE; + termios->c_cflag |= CS8; break; }

From: Ilpo Järvinen ilpo.jarvinen@linux.intel.com

[ Upstream commit 9b87162de8be26bf3156460b37deee6399fd0fcb ]

Only CS7 and CS8 seem supported but CSIZE is not sanitized from CS5 or CS6 to CS8.

Set CSIZE correctly so that userspace knows the effective value. Incorrect CSIZE also results in miscalculation of the frame bits in tty_get_char_size() or in its predecessor where the roughly the same code is directly within uart_update_timeout().

Fixes: 1da177e4c3f4 (Linux-2.6.12-rc2) Signed-off-by: Ilpo Järvinen ilpo.jarvinen@linux.intel.com Link: https://lore.kernel.org/r/20220519081808.3776-6-ilpo.jarvinen@linux.intel.co... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/tty/serial/sh-sci.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 21f81dc08139..f7dd843a3eff 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -2267,8 +2267,12 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios, unsigned long max_freq = 0; int best_clk = -1;

- if ((termios->c_cflag & CSIZE) == CS7) + if ((termios->c_cflag & CSIZE) == CS7) { smr_val |= SCSMR_CHR; + } else { + termios->c_cflag &= ~CSIZE; + termios->c_cflag |= CS8; + } if (termios->c_cflag & PARENB) smr_val |= SCSMR_PE; if (termios->c_cflag & PARODD)

From: Miaoqian Lin linmq006@gmail.com

[ Upstream commit 660ba678f9998aca6db74f2dd912fa5124f0fa31 ]

kobject_init_and_add() takes reference even when it fails. According to the doc of kobject_init_and_add()

If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object.

Fix this issue by calling kobject_put().

Fixes: 948af1f0bbc8 ("firmware: Basic dmi-sysfs support") Signed-off-by: Miaoqian Lin linmq006@gmail.com Link: https://lore.kernel.org/r/20220511071421.9769-1-linmq006@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/firmware/dmi-sysfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/firmware/dmi-sysfs.c b/drivers/firmware/dmi-sysfs.c index d5de6ee8466d..084948a31d2d 100644 --- a/drivers/firmware/dmi-sysfs.c +++ b/drivers/firmware/dmi-sysfs.c @@ -602,7 +602,7 @@ static void __init dmi_sysfs_register_handle(const struct dmi_header *dh, "%d-%d", dh->type, entry->instance);

if (*ret) { - kfree(entry); + kobject_put(&entry->kobj); return; }

From: Dan Carpenter dan.carpenter@oracle.com

[ Upstream commit e7e7104e2d5ddf3806a28695670f21bef471f1e1 ]

The "fsp->location" variable comes from user via ethtool_get_rxnfc(). Check that it is valid to prevent an out of bounds read.

Fixes: 7aab747e5563 ("net: ethernet: mediatek: add ethtool functions to configure RX flows of HW LRO") Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index dbd16dd5aa04..ade72b46e93c 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -1579,6 +1579,9 @@ static int mtk_hwlro_get_fdir_entry(struct net_device *dev, struct ethtool_rx_flow_spec *fsp = (struct ethtool_rx_flow_spec *)&cmd->fs;

+ if (fsp->location >= ARRAY_SIZE(mac->hwlro_ip)) + return -EINVAL; + /* only tcp dst ipv4 is meaningful, others are meaningless */ fsp->flow_type = TCP_V4_FLOW; fsp->h_u.tcp_ip4_spec.ip4dst = ntohl(mac->hwlro_ip[fsp->location]);

From: Alexander Lobakin alexandr.lobakin@intel.com

[ Upstream commit b5beffa20d83c4e15306c991ffd00de0d8628338 ]

With the `-z unique-symbol` linker flag or any similar mechanism, it is possible to trigger the following:

ERROR: modpost: "param_set_uint.0" [vmlinux] is a static EXPORT_SYMBOL

The reason is that for now the condition from remove_dot():

if (m && (s[n + m] == '.' || s[n + m] == 0))

which was designed to test if it's a dot or a '\0' after the suffix is never satisfied. This is due to that `s[n + m]` always points to the last digit of a numeric suffix, not on the symbol next to it (from a custom debug print added to modpost):

param_set_uint.0, s[n + m] is '0', s[n + m + 1] is '\0'

So it's off-by-one and was like that since 2014.

Fix this for the sake of any potential upcoming features, but don't bother stable-backporting, as it's well hidden -- apart from that LD flag, it can be triggered only with GCC LTO which never landed upstream.

Fixes: fcd38ed0ff26 ("scripts: modpost: fix compilation warning") Signed-off-by: Alexander Lobakin alexandr.lobakin@intel.com Reviewed-by: Petr Mladek pmladek@suse.com Signed-off-by: Masahiro Yamada masahiroy@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- scripts/mod/modpost.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c index b6eb929899c5..bc2c860f88ef 100644 --- a/scripts/mod/modpost.c +++ b/scripts/mod/modpost.c @@ -1949,7 +1949,7 @@ static char *remove_dot(char *s)

if (n && s[n]) { size_t m = strspn(s + n + 1, "0123456789"); - if (m && (s[n + m] == '.' || s[n + m] == 0)) + if (m && (s[n + m + 1] == '.' || s[n + m + 1] == 0)) s[n] = 0; } return s;

From: Zhihao Cheng chengzhihao1@huawei.com

[ Upstream commit 8c03a1c21d72210f81cb369cc528e3fde4b45411 ]

There is an use-after-free problem for 'eba_tbl' in ubi_create_volume()'s error handling path:

ubi_eba_replace_table(vol, eba_tbl) vol->eba_tbl = tbl out_mapping: ubi_eba_destroy_table(eba_tbl) // Free 'eba_tbl' out_unlock: put_device(&vol->dev) vol_release kfree(tbl->entries) // UAF

Fix it by removing redundant 'eba_tbl' releasing. Fetch a reproducer in [Link].

Fixes: 493cfaeaa0c9b ("mtd: utilize new cdev_device_add helper function") Link: https://bugzilla.kernel.org/show_bug.cgi?id=215965 Signed-off-by: Zhihao Cheng chengzhihao1@huawei.com Signed-off-by: Richard Weinberger richard@nod.at Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mtd/ubi/vmt.c | 1 - 1 file changed, 1 deletion(-)

diff --git a/drivers/mtd/ubi/vmt.c b/drivers/mtd/ubi/vmt.c index 8f641448a97a..d32144c0098a 100644 --- a/drivers/mtd/ubi/vmt.c +++ b/drivers/mtd/ubi/vmt.c @@ -315,7 +315,6 @@ int ubi_create_volume(struct ubi_device *ubi, struct ubi_mkvol_req *req) ubi->volumes[vol_id] = NULL; ubi->vol_count -= 1; spin_unlock(&ubi->volumes_lock); - ubi_eba_destroy_table(eba_tbl); out_acc: spin_lock(&ubi->volumes_lock); ubi->rsvd_pebs -= vol->reserved_pebs;

From: Leo Yan leo.yan@linaro.org

[ Upstream commit b24192a17337abbf3f44aaa75e15df14a2d0016e ]

The function percent_rmt_hitm_cmp() wrongly uses local HITMs for sorting remote HITMs.

Since this function is to sort cache lines for remote HITMs, this patch changes to use 'rmt_hitm' field for correct sorting.

Fixes: 9cb3500afc0980c5 ("perf c2c report: Add hitm/store percent related sort keys") Signed-off-by: Leo Yan leo.yan@linaro.org Acked-by: Namhyung Kim namhyung@kernel.org Cc: Alexander Shishkin alexander.shishkin@linux.intel.com Cc: Ingo Molnar mingo@redhat.com Cc: Jiri Olsa jolsa@kernel.org Cc: Joe Mario jmario@redhat.com Cc: Mark Rutland mark.rutland@arm.com Cc: Peter Zijlstra peterz@infradead.org Link: https://lore.kernel.org/r/20220530084253.750190-1-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/perf/builtin-c2c.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/tools/perf/builtin-c2c.c b/tools/perf/builtin-c2c.c index 9cbd8b0d5b77..729e5f137963 100644 --- a/tools/perf/builtin-c2c.c +++ b/tools/perf/builtin-c2c.c @@ -886,8 +886,8 @@ percent_rmt_hitm_cmp(struct perf_hpp_fmt *fmt __maybe_unused, double per_left; double per_right;

- per_left = PERCENT(left, lcl_hitm); - per_right = PERCENT(right, lcl_hitm); + per_left = PERCENT(left, rmt_hitm); + per_right = PERCENT(right, rmt_hitm);

return per_left - per_right; }

From: Jun Miao jun.miao@intel.com

[ Upstream commit 12025abdc8539ed9d5014e2d647a3fd1bd3de5cd ]

When setting bootparams="trace_event=initcall:initcall_start tp_printk=1" in the cmdline, the output_printk() was called, and the spin_lock_irqsave() was called in the atomic and irq disable interrupt context suitation. On the PREEMPT_RT kernel, these locks are replaced with sleepable rt-spinlock, so the stack calltrace will be triggered. Fix it by raw_spin_lock_irqsave when PREEMPT_RT and "trace_event=initcall:initcall_start tp_printk=1" enabled.

BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: swapper/0 preempt_count: 2, expected: 0 RCU nest depth: 0, expected: 0 Preemption disabled at: [<ffffffff8992303e>] try_to_wake_up+0x7e/0xba0 CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.17.1-rt17+ #19 34c5812404187a875f32bee7977f7367f9679ea7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x60/0x8c dump_stack+0x10/0x12 __might_resched.cold+0x11d/0x155 rt_spin_lock+0x40/0x70 trace_event_buffer_commit+0x2fa/0x4c0 ? map_vsyscall+0x93/0x93 trace_event_raw_event_initcall_start+0xbe/0x110 ? perf_trace_initcall_finish+0x210/0x210 ? probe_sched_wakeup+0x34/0x40 ? ttwu_do_wakeup+0xda/0x310 ? trace_hardirqs_on+0x35/0x170 ? map_vsyscall+0x93/0x93 do_one_initcall+0x217/0x3c0 ? trace_event_raw_event_initcall_level+0x170/0x170 ? push_cpu_stop+0x400/0x400 ? cblist_init_generic+0x241/0x290 kernel_init_freeable+0x1ac/0x347 ? _raw_spin_unlock_irq+0x65/0x80 ? rest_init+0xf0/0xf0 kernel_init+0x1e/0x150 ret_from_fork+0x22/0x30 </TASK>

Link: https://lkml.kernel.org/r/20220419013910.894370-1-jun.miao@intel.com

Signed-off-by: Jun Miao jun.miao@intel.com Signed-off-by: Steven Rostedt (Google) rostedt@goodmis.org Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/trace/trace.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index c728acb6b14c..aaf1194be551 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -2324,7 +2324,7 @@ trace_event_buffer_lock_reserve(struct ring_buffer **current_rb, } EXPORT_SYMBOL_GPL(trace_event_buffer_lock_reserve);

-static DEFINE_SPINLOCK(tracepoint_iter_lock); +static DEFINE_RAW_SPINLOCK(tracepoint_iter_lock); static DEFINE_MUTEX(tracepoint_printk_mutex);

static void output_printk(struct trace_event_buffer *fbuffer) @@ -2345,14 +2345,14 @@ static void output_printk(struct trace_event_buffer *fbuffer)

event = &fbuffer->trace_file->event_call->event;

- spin_lock_irqsave(&tracepoint_iter_lock, flags); + raw_spin_lock_irqsave(&tracepoint_iter_lock, flags); trace_seq_init(&iter->seq); iter->ent = fbuffer->entry; event_call->event.funcs->trace(iter, 0, event); trace_seq_putc(&iter->seq, 0); printk("%s", iter->seq.buffer);

- spin_unlock_irqrestore(&tracepoint_iter_lock, flags); + raw_spin_unlock_irqrestore(&tracepoint_iter_lock, flags); }

int tracepoint_printk_sysctl(struct ctl_table *table, int write,