From: Russell King rmk+kernel@armlinux.org.uk
[ Upstream commit ffd9a1ba9fdb7f2bd1d1ad9b9243d34e96756ba2 ]
DMA got broken a while back in two different ways: 1) a change in the behaviour of disable_irq() to wait for the interrupt to finish executing causes us to deadlock at the end of DMA. 2) a change to avoid modifying the scatterlist left the first transfer uninitialised.
DMA is only used with expansion cards, so has gone unnoticed.
Fixes: fa4e99899932 ("[ARM] dma: RiscPC: don't modify DMA SG entries") Signed-off-by: Russell King rmk+kernel@armlinux.org.uk Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/mach-rpc/dma.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-rpc/dma.c b/arch/arm/mach-rpc/dma.c index 6d3517dc4772..82aac38fa2cf 100644 --- a/arch/arm/mach-rpc/dma.c +++ b/arch/arm/mach-rpc/dma.c @@ -131,7 +131,7 @@ static irqreturn_t iomd_dma_handle(int irq, void *dev_id) } while (1);
idma->state = ~DMA_ST_AB; - disable_irq(irq); + disable_irq_nosync(irq);
return IRQ_HANDLED; } @@ -174,6 +174,9 @@ static void iomd_enable_dma(unsigned int chan, dma_t *dma) DMA_FROM_DEVICE : DMA_TO_DEVICE); }
+ idma->dma_addr = idma->dma.sg->dma_address; + idma->dma_len = idma->dma.sg->length; + iomd_writeb(DMA_CR_C, dma_base + CR); idma->state = DMA_ST_AB; }
From: Douglas Anderson dianders@chromium.org
[ Upstream commit 8ef1ba39a9fa53d2205e633bc9b21840a275908e ]
This is similar to commit e6186820a745 ("arm64: dts: rockchip: Arch counter doesn't tick in system suspend"). Specifically on the rk3288 it can be seen that the timer stops ticking in suspend if we end up running through the "osc_disable" path in rk3288_slp_mode_set(). In that path the 24 MHz clock will turn off and the timer stops.
To test this, I ran this on a Chrome OS filesystem: before=$(date); \ suspend_stress_test -c1 --suspend_min=30 --suspend_max=31; \ echo ${before}; date
...and I found that unless I plug in a device that requests USB wakeup to be active that the two calls to "date" would show that fewer than 30 seconds passed.
NOTE: deep suspend (where the 24 MHz clock gets disabled) isn't supported yet on upstream Linux so this was tested on a downstream kernel.
Signed-off-by: Douglas Anderson dianders@chromium.org Signed-off-by: Heiko Stuebner heiko@sntech.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/rk3288.dtsi | 1 + 1 file changed, 1 insertion(+)
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index 04ea209f1737..98abb053b7da 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -205,6 +205,7 @@ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>, <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; clock-frequency = <24000000>; + arm,no-tick-in-suspend; };
timer: timer@ff810000 {
From: Prarit Bhargava prarit@redhat.com
[ Upstream commit 6e6de3dee51a439f76eb73c22ae2ffd2c9384712 ]
Microsoft HyperV disables the X86_FEATURE_SMCA bit on AMD systems, and linux guests boot with repeated errors:
amd64_edac_mod: Unknown symbol amd_unregister_ecc_decoder (err -2) amd64_edac_mod: Unknown symbol amd_register_ecc_decoder (err -2) amd64_edac_mod: Unknown symbol amd_report_gart_errors (err -2) amd64_edac_mod: Unknown symbol amd_unregister_ecc_decoder (err -2) amd64_edac_mod: Unknown symbol amd_register_ecc_decoder (err -2) amd64_edac_mod: Unknown symbol amd_report_gart_errors (err -2)
The warnings occur because the module code erroneously returns -EEXIST for modules that have failed to load and are in the process of being removed from the module list.
module amd64_edac_mod has a dependency on module edac_mce_amd. Using modules.dep, systemd will load edac_mce_amd for every request of amd64_edac_mod. When the edac_mce_amd module loads, the module has state MODULE_STATE_UNFORMED and once the module load fails and the state becomes MODULE_STATE_GOING. Another request for edac_mce_amd module executes and add_unformed_module() will erroneously return -EEXIST even though the previous instance of edac_mce_amd has MODULE_STATE_GOING. Upon receiving -EEXIST, systemd attempts to load amd64_edac_mod, which fails because of unknown symbols from edac_mce_amd.
add_unformed_module() must wait to return for any case other than MODULE_STATE_LIVE to prevent a race between multiple loads of dependent modules.
Signed-off-by: Prarit Bhargava prarit@redhat.com Signed-off-by: Barret Rhoden brho@google.com Cc: David Arcari darcari@redhat.com Cc: Jessica Yu jeyu@kernel.org Cc: Heiko Carstens heiko.carstens@de.ibm.com Signed-off-by: Jessica Yu jeyu@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/module.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/kernel/module.c b/kernel/module.c index bcc78f4c15e9..b940b2825b7b 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -3225,8 +3225,7 @@ static bool finished_loading(const char *name) sched_annotate_sleep(); mutex_lock(&module_mutex); mod = find_module_all(name, strlen(name), true); - ret = !mod || mod->state == MODULE_STATE_LIVE - || mod->state == MODULE_STATE_GOING; + ret = !mod || mod->state == MODULE_STATE_LIVE; mutex_unlock(&module_mutex);
return ret; @@ -3385,8 +3384,7 @@ static int add_unformed_module(struct module *mod) mutex_lock(&module_mutex); old = find_module_all(mod->name, strlen(mod->name), true); if (old != NULL) { - if (old->state == MODULE_STATE_COMING - || old->state == MODULE_STATE_UNFORMED) { + if (old->state != MODULE_STATE_LIVE) { /* Wait in case it fails to load. */ mutex_unlock(&module_mutex); err = wait_event_interruptible(module_wq,
From: Petr Cvek petrcvekcz@gmail.com
[ Upstream commit ba1bc0fcdeaf3bf583c1517bd2e3e29cf223c969 ]
The modification of EXIN register doesn't clean the bitfield before the writing of a new value. After a few modifications the bitfield would accumulate only '1's.
Signed-off-by: Petr Cvek petrcvekcz@gmail.com Signed-off-by: Paul Burton paul.burton@mips.com Cc: hauke@hauke-m.de Cc: john@phrozen.org Cc: linux-mips@vger.kernel.org Cc: openwrt-devel@lists.openwrt.org Cc: pakahmar@hotmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/mips/lantiq/irq.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/mips/lantiq/irq.c b/arch/mips/lantiq/irq.c index 2e7f60c9fc5d..a7057a06c096 100644 --- a/arch/mips/lantiq/irq.c +++ b/arch/mips/lantiq/irq.c @@ -160,8 +160,9 @@ static int ltq_eiu_settype(struct irq_data *d, unsigned int type) if (edge) irq_set_handler(d->hwirq, handle_edge_irq);
- ltq_eiu_w32(ltq_eiu_r32(LTQ_EIU_EXIN_C) | - (val << (i * 4)), LTQ_EIU_EXIN_C); + ltq_eiu_w32((ltq_eiu_r32(LTQ_EIU_EXIN_C) & + (~(7 << (i * 4)))) | (val << (i * 4)), + LTQ_EIU_EXIN_C); } }
From: Geert Uytterhoeven geert+renesas@glider.be
[ Upstream commit 78efb76ab4dfb8f74f290ae743f34162cd627f19 ]
While the .device_prep_slave_sg() callback rejects empty scatterlists, it still accepts single-entry scatterlists with a zero-length segment. These may happen if a driver calls dmaengine_prep_slave_single() with a zero len parameter. The corresponding DMA request will never complete, leading to messages like:
rcar-dmac e7300000.dma-controller: Channel Address Error happen
and DMA timeouts.
Although requesting a zero-length DMA request is a driver bug, rejecting it early eases debugging. Note that the .device_prep_dma_memcpy() callback already rejects requests to copy zero bytes.
Reported-by: Eugeniu Rosca erosca@de.adit-jv.com Analyzed-by: Yoshihiro Shimoda yoshihiro.shimoda.uh@renesas.com Signed-off-by: Geert Uytterhoeven geert+renesas@glider.be Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/dma/sh/rcar-dmac.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/dma/sh/rcar-dmac.c b/drivers/dma/sh/rcar-dmac.c index 2b36d1c63aa5..956189a1ba81 100644 --- a/drivers/dma/sh/rcar-dmac.c +++ b/drivers/dma/sh/rcar-dmac.c @@ -1030,7 +1030,7 @@ rcar_dmac_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, dma_addr_t dev_addr;
/* Someone calling slave DMA on a generic channel? */ - if (rchan->mid_rid < 0 || !sg_len) { + if (rchan->mid_rid < 0 || !sg_len || !sg_dma_len(sgl)) { dev_warn(chan->device->dev, "%s: bad parameter: len=%d, id=%d\n", __func__, sg_len, rchan->mid_rid);
From: Russell King rmk+kernel@armlinux.org.uk
[ Upstream commit 5808b14a1f52554de612fee85ef517199855e310 ]
Fix a use-after-free bug during filesystem initialisation, where we access the disc record (which is stored in a buffer) after we have released the buffer.
Signed-off-by: Russell King rmk+kernel@armlinux.org.uk Signed-off-by: Al Viro viro@zeniv.linux.org.uk Signed-off-by: Sasha Levin sashal@kernel.org --- fs/adfs/super.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/fs/adfs/super.c b/fs/adfs/super.c index 4d4a0df8344f..b00ae922ece2 100644 --- a/fs/adfs/super.c +++ b/fs/adfs/super.c @@ -368,6 +368,7 @@ static int adfs_fill_super(struct super_block *sb, void *data, int silent) struct buffer_head *bh; struct object_info root_obj; unsigned char *b_data; + unsigned int blocksize; struct adfs_sb_info *asb; struct inode *root; int ret = -EINVAL; @@ -419,8 +420,10 @@ static int adfs_fill_super(struct super_block *sb, void *data, int silent) goto error_free_bh; }
+ blocksize = 1 << dr->log2secsize; brelse(bh); - if (sb_set_blocksize(sb, 1 << dr->log2secsize)) { + + if (sb_set_blocksize(sb, blocksize)) { bh = sb_bread(sb, ADFS_DISCRECORD / sb->s_blocksize); if (!bh) { adfs_error(sb, "couldn't read superblock on "
From: David Sterba dsterba@suse.com
[ Upstream commit 0ee5f8ae082e1f675a2fb6db601c31ac9958a134 ]
The list of profiles in btrfs_chunk_max_errors lists DUP as a profile DUP able to tolerate 1 device missing. Though this profile is special with 2 copies, it still needs the device, unlike the others.
Looking at the history of changes, thre's no clear reason why DUP is there, functions were refactored and blocks of code merged to one helper.
d20983b40e828 Btrfs: fix writing data into the seed filesystem - factor code to a helper
de11cc12df173 Btrfs: don't pre-allocate btrfs bio - unrelated change, DUP still in the list with max errors 1
a236aed14ccb0 Btrfs: Deal with failed writes in mirrored configurations - introduced the max errors, leaves DUP and RAID1 in the same group
Reviewed-by: Qu Wenruo wqu@suse.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/btrfs/volumes.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c index 4eb7a6ba7e47..55ce6543050d 100644 --- a/fs/btrfs/volumes.c +++ b/fs/btrfs/volumes.c @@ -4942,8 +4942,7 @@ static inline int btrfs_chunk_max_errors(struct map_lookup *map)
if (map->type & (BTRFS_BLOCK_GROUP_RAID1 | BTRFS_BLOCK_GROUP_RAID10 | - BTRFS_BLOCK_GROUP_RAID5 | - BTRFS_BLOCK_GROUP_DUP)) { + BTRFS_BLOCK_GROUP_RAID5)) { max_errors = 1; } else if (map->type & BTRFS_BLOCK_GROUP_RAID6) { max_errors = 2;
From: Andrea Parri andrea.parri@amarulasolutions.com
[ Upstream commit 749607731e26dfb2558118038c40e9c0c80d23b5 ]
This barrier only applies to the read-modify-write operations; in particular, it does not apply to the atomic64_set() primitive.
Replace the barrier with an smp_mb().
Fixes: fdd4e15838e59 ("ceph: rework dcache readdir") Reported-by: "Paul E. McKenney" paulmck@linux.ibm.com Reported-by: Peter Zijlstra peterz@infradead.org Signed-off-by: Andrea Parri andrea.parri@amarulasolutions.com Reviewed-by: "Yan, Zheng" zyan@redhat.com Signed-off-by: Ilya Dryomov idryomov@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ceph/super.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
diff --git a/fs/ceph/super.h b/fs/ceph/super.h index 8c8cb8fe3d32..5d05c77c158d 100644 --- a/fs/ceph/super.h +++ b/fs/ceph/super.h @@ -474,7 +474,12 @@ static inline void __ceph_dir_set_complete(struct ceph_inode_info *ci, long long release_count, long long ordered_count) { - smp_mb__before_atomic(); + /* + * Makes sure operations that setup readdir cache (update page + * cache and i_size) are strongly ordered w.r.t. the following + * atomic64_set() operations. + */ + smp_mb(); atomic64_set(&ci->i_complete_seq[0], release_count); atomic64_set(&ci->i_complete_seq[1], ordered_count); }
From: Benjamin Block bblock@linux.ibm.com
[ Upstream commit 484647088826f2f651acbda6bcf9536b8a466703 ]
GCC v9 emits this warning: CC drivers/s390/scsi/zfcp_erp.o drivers/s390/scsi/zfcp_erp.c: In function 'zfcp_erp_action_enqueue': drivers/s390/scsi/zfcp_erp.c:217:26: warning: 'erp_action' may be used uninitialized in this function [-Wmaybe-uninitialized] 217 | struct zfcp_erp_action *erp_action; | ^~~~~~~~~~
This is a possible false positive case, as also documented in the GCC documentations: https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html#index-Wmaybe-uniniti...
The actual code-sequence is like this: Various callers can invoke the function below with the argument "want" being one of: ZFCP_ERP_ACTION_REOPEN_ADAPTER, ZFCP_ERP_ACTION_REOPEN_PORT_FORCED, ZFCP_ERP_ACTION_REOPEN_PORT, or ZFCP_ERP_ACTION_REOPEN_LUN.
zfcp_erp_action_enqueue(want, ...) ... need = zfcp_erp_required_act(want, ...) need = want ... maybe: need = ZFCP_ERP_ACTION_REOPEN_PORT maybe: need = ZFCP_ERP_ACTION_REOPEN_ADAPTER ... return need ... zfcp_erp_setup_act(need, ...) struct zfcp_erp_action *erp_action; // <== line 217 ... switch(need) { case ZFCP_ERP_ACTION_REOPEN_LUN: ... erp_action = &zfcp_sdev->erp_action; WARN_ON_ONCE(erp_action->port != port); // <== access ... break; case ZFCP_ERP_ACTION_REOPEN_PORT: case ZFCP_ERP_ACTION_REOPEN_PORT_FORCED: ... erp_action = &port->erp_action; WARN_ON_ONCE(erp_action->port != port); // <== access ... break; case ZFCP_ERP_ACTION_REOPEN_ADAPTER: ... erp_action = &adapter->erp_action; WARN_ON_ONCE(erp_action->port != NULL); // <== access ... break; } ... WARN_ON_ONCE(erp_action->adapter != adapter); // <== access
When zfcp_erp_setup_act() is called, 'need' will never be anything else than one of the 4 possible enumeration-names that are used in the switch-case, and 'erp_action' is initialized for every one of them, before it is used. Thus the warning is a false positive, as documented.
We introduce the extra if{} in the beginning to create an extra code-flow, so the compiler can be convinced that the switch-case will never see any other value.
BUG_ON()/BUG() is intentionally not used to not crash anything, should this ever happen anyway - right now it's impossible, as argued above; and it doesn't introduce a 'default:' switch-case to retain warnings should 'enum zfcp_erp_act_type' ever be extended and no explicit case be introduced. See also v5.0 commit 399b6c8bc9f7 ("scsi: zfcp: drop old default switch case which might paper over missing case").
Signed-off-by: Benjamin Block bblock@linux.ibm.com Reviewed-by: Jens Remus jremus@linux.ibm.com Reviewed-by: Steffen Maier maier@linux.ibm.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/s390/scsi/zfcp_erp.c | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c index abe460eac712..cc62d8cc8cfd 100644 --- a/drivers/s390/scsi/zfcp_erp.c +++ b/drivers/s390/scsi/zfcp_erp.c @@ -10,6 +10,7 @@ #define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
#include <linux/kthread.h> +#include <linux/bug.h> #include "zfcp_ext.h" #include "zfcp_reqlist.h"
@@ -244,6 +245,12 @@ static struct zfcp_erp_action *zfcp_erp_setup_act(int need, u32 act_status, struct zfcp_erp_action *erp_action; struct zfcp_scsi_dev *zfcp_sdev;
+ if (WARN_ON_ONCE(need != ZFCP_ERP_ACTION_REOPEN_LUN && + need != ZFCP_ERP_ACTION_REOPEN_PORT && + need != ZFCP_ERP_ACTION_REOPEN_PORT_FORCED && + need != ZFCP_ERP_ACTION_REOPEN_ADAPTER)) + return NULL; + switch (need) { case ZFCP_ERP_ACTION_REOPEN_LUN: zfcp_sdev = sdev_to_zfcp(sdev);
From: Arnd Bergmann arnd@arndb.de
[ Upstream commit dfd6f9ad36368b8dbd5f5a2b2f0a4705ae69a323 ]
clang gets confused by an uninitialized variable in what looks to it like a never executed code path:
arch/x86/kernel/acpi/boot.c:618:13: error: variable 'polarity' is uninitialized when used here [-Werror,-Wuninitialized] polarity = polarity ? ACPI_ACTIVE_LOW : ACPI_ACTIVE_HIGH; ^~~~~~~~ arch/x86/kernel/acpi/boot.c:606:32: note: initialize the variable 'polarity' to silence this warning int rc, irq, trigger, polarity; ^ = 0 arch/x86/kernel/acpi/boot.c:617:12: error: variable 'trigger' is uninitialized when used here [-Werror,-Wuninitialized] trigger = trigger ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE; ^~~~~~~ arch/x86/kernel/acpi/boot.c:606:22: note: initialize the variable 'trigger' to silence this warning int rc, irq, trigger, polarity; ^ = 0
This is unfortunately a design decision in clang and won't be fixed.
Changing the acpi_get_override_irq() macro to an inline function reliably avoids the issue.
Signed-off-by: Arnd Bergmann arnd@arndb.de Reviewed-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Reviewed-by: Nathan Chancellor natechancellor@gmail.com Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- include/linux/acpi.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 3672893b275e..6a30f1e03aa9 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -226,7 +226,10 @@ void acpi_set_irq_model(enum acpi_irq_model_id model, #ifdef CONFIG_X86_IO_APIC extern int acpi_get_override_irq(u32 gsi, int *trigger, int *polarity); #else -#define acpi_get_override_irq(gsi, trigger, polarity) (-1) +static inline int acpi_get_override_irq(u32 gsi, int *trigger, int *polarity) +{ + return -1; +} #endif /* * This function undoes the effect of one call to acpi_register_gsi().
From: Phong Tran tranmanphong@gmail.com
[ Upstream commit f384e62a82ba5d85408405fdd6aeff89354deaa9 ]
The syzbot test with random endpoint address which made the idx is overflow in the table of endpoint configuations.
this adds the checking for fixing the error report from syzbot
KASAN: stack-out-of-bounds Read in hfcsusb_probe [1] The patch tested by syzbot [2]
Reported-by: syzbot+8750abbc3a46ef47d509@syzkaller.appspotmail.com
[1]: https://syzkaller.appspot.com/bug?id=30a04378dac680c5d521304a00a86156bb91352... [2]: https://groups.google.com/d/msg/syzkaller-bugs/_6HBdge8F3E/OJn7wVNpBAAJ
Signed-off-by: Phong Tran tranmanphong@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/isdn/hardware/mISDN/hfcsusb.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/isdn/hardware/mISDN/hfcsusb.c b/drivers/isdn/hardware/mISDN/hfcsusb.c index 114f3bcba1b0..c60c7998af17 100644 --- a/drivers/isdn/hardware/mISDN/hfcsusb.c +++ b/drivers/isdn/hardware/mISDN/hfcsusb.c @@ -1963,6 +1963,9 @@ hfcsusb_probe(struct usb_interface *intf, const struct usb_device_id *id)
/* get endpoint base */ idx = ((ep_addr & 0x7f) - 1) * 2; + if (idx > 15) + return -EIO; + if (ep_addr & 0x80) idx++; attr = ep->desc.bmAttributes;
From: Benjamin Poirier bpoirier@suse.com
[ Upstream commit 7429c6c0d9cb086d8e79f0d2a48ae14851d2115e ]
While changing the number of interrupt channels, be2net stops adapter operation (including netif_tx_disable()) but it doesn't signal that it cannot transmit. This may lead dev_watchdog() to falsely trigger during that time.
Add the missing call to netif_carrier_off(), following the pattern used in many other drivers. netif_carrier_on() is already taken care of in be_open().
Signed-off-by: Benjamin Poirier bpoirier@suse.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/emulex/benet/be_main.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c index 26255862d1cf..7524a33b7032 100644 --- a/drivers/net/ethernet/emulex/benet/be_main.c +++ b/drivers/net/ethernet/emulex/benet/be_main.c @@ -4307,8 +4307,12 @@ int be_update_queues(struct be_adapter *adapter) struct net_device *netdev = adapter->netdev; int status;
- if (netif_running(netdev)) + if (netif_running(netdev)) { + /* device cannot transmit now, avoid dev_watchdog timeouts */ + netif_carrier_off(netdev); + be_close(netdev); + }
be_cancel_worker(adapter);
From: Qian Cai cai@lca.pw
[ Upstream commit ec6335586953b0df32f83ef696002063090c7aef ]
There are many compiler warnings like this,
In file included from ./arch/x86/include/asm/smp.h:13, from ./arch/x86/include/asm/mmzone_64.h:11, from ./arch/x86/include/asm/mmzone.h:5, from ./include/linux/mmzone.h:969, from ./include/linux/gfp.h:6, from ./include/linux/mm.h:10, from arch/x86/kernel/apic/io_apic.c:34: arch/x86/kernel/apic/io_apic.c: In function 'check_timer': ./arch/x86/include/asm/apic.h:37:11: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits] if ((v) <= apic_verbosity) \ ^~ arch/x86/kernel/apic/io_apic.c:2160:2: note: in expansion of macro 'apic_printk' apic_printk(APIC_QUIET, KERN_INFO "..TIMER: vector=0x%02X " ^~~~~~~~~~~ ./arch/x86/include/asm/apic.h:37:11: warning: comparison of unsigned expression >= 0 is always true [-Wtype-limits] if ((v) <= apic_verbosity) \ ^~ arch/x86/kernel/apic/io_apic.c:2207:4: note: in expansion of macro 'apic_printk' apic_printk(APIC_QUIET, KERN_ERR "..MP-BIOS bug: " ^~~~~~~~~~~
APIC_QUIET is 0, so silence them by making apic_verbosity type int.
Signed-off-by: Qian Cai cai@lca.pw Signed-off-by: Thomas Gleixner tglx@linutronix.de Link: https://lkml.kernel.org/r/1562621805-24789-1-git-send-email-cai@lca.pw Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/include/asm/apic.h | 2 +- arch/x86/kernel/apic/apic.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h index fd810a57ab1b..3328a37ddc75 100644 --- a/arch/x86/include/asm/apic.h +++ b/arch/x86/include/asm/apic.h @@ -44,7 +44,7 @@ static inline void generic_apic_probe(void)
#ifdef CONFIG_X86_LOCAL_APIC
-extern unsigned int apic_verbosity; +extern int apic_verbosity; extern int local_apic_timer_c2_ok;
extern int disable_apic; diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index deddc9b93299..cc6c33249850 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -171,7 +171,7 @@ int first_system_vector = FIRST_SYSTEM_VECTOR; /* * Debug level, exported for io_apic.c */ -unsigned int apic_verbosity; +int apic_verbosity;
int pic_mode;
From: Arnd Bergmann arnd@arndb.de
[ Upstream commit 29e7e9664aec17b94a9c8c5a75f8d216a206aa3a ]
clang warns about a few parts of the math-emu implementation where a 16-bit integer becomes negative during assignment:
arch/x86/math-emu/poly_tan.c:88:35: error: implicit conversion from 'int' to 'short' changes value from 49216 to -16320 [-Werror,-Wconstant-conversion] (0x41 + EXTENDED_Ebias) | SIGN_Negative); ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~ arch/x86/math-emu/fpu_emu.h:180:58: note: expanded from macro 'setexponent16' #define setexponent16(x,y) { (*(short *)&((x)->exp)) = (y); } ~ ^ arch/x86/math-emu/reg_constant.c:37:32: error: implicit conversion from 'int' to 'short' changes value from 49085 to -16451 [-Werror,-Wconstant-conversion] FPU_REG const CONST_PI2extra = MAKE_REG(NEG, -66, ^~~~~~~~~~~~~~~~~~ arch/x86/math-emu/reg_constant.c:21:25: note: expanded from macro 'MAKE_REG' ((EXTENDED_Ebias+(e)) | ((SIGN_##s != 0)*0x8000)) } ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~ arch/x86/math-emu/reg_constant.c:48:28: error: implicit conversion from 'int' to 'short' changes value from 65535 to -1 [-Werror,-Wconstant-conversion] FPU_REG const CONST_QNaN = MAKE_REG(NEG, EXP_OVER, 0x00000000, 0xC0000000); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ arch/x86/math-emu/reg_constant.c:21:25: note: expanded from macro 'MAKE_REG' ((EXTENDED_Ebias+(e)) | ((SIGN_##s != 0)*0x8000)) } ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~
The code is correct as is, so add a typecast to shut up the warnings.
Signed-off-by: Arnd Bergmann arnd@arndb.de Signed-off-by: Thomas Gleixner tglx@linutronix.de Link: https://lkml.kernel.org/r/20190712090816.350668-1-arnd@arndb.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/math-emu/fpu_emu.h | 2 +- arch/x86/math-emu/reg_constant.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/x86/math-emu/fpu_emu.h b/arch/x86/math-emu/fpu_emu.h index afbc4d805d66..df5aee5402c4 100644 --- a/arch/x86/math-emu/fpu_emu.h +++ b/arch/x86/math-emu/fpu_emu.h @@ -176,7 +176,7 @@ static inline void reg_copy(FPU_REG const *x, FPU_REG *y) #define setexponentpos(x,y) { (*(short *)&((x)->exp)) = \ ((y) + EXTENDED_Ebias) & 0x7fff; } #define exponent16(x) (*(short *)&((x)->exp)) -#define setexponent16(x,y) { (*(short *)&((x)->exp)) = (y); } +#define setexponent16(x,y) { (*(short *)&((x)->exp)) = (u16)(y); } #define addexponent(x,y) { (*(short *)&((x)->exp)) += (y); } #define stdexp(x) { (*(short *)&((x)->exp)) += EXTENDED_Ebias; }
diff --git a/arch/x86/math-emu/reg_constant.c b/arch/x86/math-emu/reg_constant.c index 00548354912f..382093c5072b 100644 --- a/arch/x86/math-emu/reg_constant.c +++ b/arch/x86/math-emu/reg_constant.c @@ -17,7 +17,7 @@ #include "control_w.h"
#define MAKE_REG(s, e, l, h) { l, h, \ - ((EXTENDED_Ebias+(e)) | ((SIGN_##s != 0)*0x8000)) } + (u16)((EXTENDED_Ebias+(e)) | ((SIGN_##s != 0)*0x8000)) }
FPU_REG const CONST_1 = MAKE_REG(POS, 0, 0x00000000, 0x80000000); #if 0
From: Doug Berger opendmb@gmail.com
[ Upstream commit c633324e311243586675e732249339685e5d6faa ]
The description of cma_declare_contiguous() indicates that if the 'fixed' argument is true the reserved contiguous area must be exactly at the address of the 'base' argument.
However, the function currently allows the 'base', 'size', and 'limit' arguments to be silently adjusted to meet alignment constraints. This commit enforces the documented behavior through explicit checks that return an error if the region does not fit within a specified region.
Link: http://lkml.kernel.org/r/1561422051-16142-1-git-send-email-opendmb@gmail.com Fixes: 5ea3b1b2f8ad ("cma: add placement specifier for "cma=" kernel parameter") Signed-off-by: Doug Berger opendmb@gmail.com Acked-by: Michal Nazarewicz mina86@mina86.com Cc: Yue Hu huyue2@yulong.com Cc: Mike Rapoport rppt@linux.ibm.com Cc: Laura Abbott labbott@redhat.com Cc: Peng Fan peng.fan@nxp.com Cc: Thomas Gleixner tglx@linutronix.de Cc: Marek Szyprowski m.szyprowski@samsung.com Cc: Andrey Konovalov andreyknvl@google.com Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- mm/cma.c | 13 +++++++++++++ 1 file changed, 13 insertions(+)
diff --git a/mm/cma.c b/mm/cma.c index 5ae4452656cd..65c7aa419048 100644 --- a/mm/cma.c +++ b/mm/cma.c @@ -268,6 +268,12 @@ int __init cma_declare_contiguous(phys_addr_t base, */ alignment = max(alignment, (phys_addr_t)PAGE_SIZE << max_t(unsigned long, MAX_ORDER - 1, pageblock_order)); + if (fixed && base & (alignment - 1)) { + ret = -EINVAL; + pr_err("Region at %pa must be aligned to %pa bytes\n", + &base, &alignment); + goto err; + } base = ALIGN(base, alignment); size = ALIGN(size, alignment); limit &= ~(alignment - 1); @@ -298,6 +304,13 @@ int __init cma_declare_contiguous(phys_addr_t base, if (limit == 0 || limit > memblock_end) limit = memblock_end;
+ if (base + size > limit) { + ret = -EINVAL; + pr_err("Size (%pa) of region at %pa exceeds limit (%pa)\n", + &size, &base, &limit); + goto err; + } + /* Reserve memory */ if (fixed) { if (memblock_is_region_reserved(base, size) ||
From: Zhouyang Jia jiazhouyang09@gmail.com
[ Upstream commit 02551c23bcd85f0c68a8259c7b953d49d44f86af ]
When fget fails, the lack of error-handling code may cause unexpected results.
This patch adds error-handling code after calling fget.
Link: http://lkml.kernel.org/r/2514ec03df9c33b86e56748513267a80dd8004d9.1558117389... Signed-off-by: Zhouyang Jia jiazhouyang09@gmail.com Signed-off-by: Jan Harkes jaharkes@cs.cmu.edu Cc: Arnd Bergmann arnd@arndb.de Cc: Colin Ian King colin.king@canonical.com Cc: Dan Carpenter dan.carpenter@oracle.com Cc: David Howells dhowells@redhat.com Cc: Fabian Frederick fabf@skynet.be Cc: Mikko Rapeli mikko.rapeli@iki.fi Cc: Sam Protsenko semen.protsenko@linaro.org Cc: Yann Droneaud ydroneaud@opteya.com Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/coda/psdev.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/fs/coda/psdev.c b/fs/coda/psdev.c index 822629126e89..ff9b5cf8ff01 100644 --- a/fs/coda/psdev.c +++ b/fs/coda/psdev.c @@ -187,8 +187,11 @@ static ssize_t coda_psdev_write(struct file *file, const char __user *buf, if (req->uc_opcode == CODA_OPEN_BY_FD) { struct coda_open_by_fd_out *outp = (struct coda_open_by_fd_out *)req->uc_data; - if (!outp->oh.result) + if (!outp->oh.result) { outp->fh = fget(outp->fd); + if (!outp->fh) + return -EBADF; + } }
wake_up(&req->uc_sleep);
From: Sam Protsenko semen.protsenko@linaro.org
[ Upstream commit b2a57e334086602be56b74958d9f29b955cd157f ]
The kernel is self-contained project and can be built with bare-metal toolchain. But bare-metal toolchain doesn't define __linux__. Because of this u_quad_t type is not defined when using bare-metal toolchain and codafs build fails. This patch fixes it by defining u_quad_t type unconditionally.
Link: http://lkml.kernel.org/r/3cbb40b0a57b6f9923a9d67b53473c0b691a3eaa.1558117389... Signed-off-by: Sam Protsenko semen.protsenko@linaro.org Signed-off-by: Jan Harkes jaharkes@cs.cmu.edu Cc: Arnd Bergmann arnd@arndb.de Cc: Colin Ian King colin.king@canonical.com Cc: Dan Carpenter dan.carpenter@oracle.com Cc: David Howells dhowells@redhat.com Cc: Fabian Frederick fabf@skynet.be Cc: Mikko Rapeli mikko.rapeli@iki.fi Cc: Yann Droneaud ydroneaud@opteya.com Cc: Zhouyang Jia jiazhouyang09@gmail.com Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/linux/coda.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/include/linux/coda.h b/include/linux/coda.h index d30209b9cef8..0ca0c83fdb1c 100644 --- a/include/linux/coda.h +++ b/include/linux/coda.h @@ -58,8 +58,7 @@ Mellon the rights to redistribute these changes without encumbrance. #ifndef _CODA_HEADER_ #define _CODA_HEADER_
-#if defined(__linux__) typedef unsigned long long u_quad_t; -#endif + #include <uapi/linux/coda.h> #endif
From: Mikko Rapeli mikko.rapeli@iki.fi
[ Upstream commit f90fb3c7e2c13ae829db2274b88b845a75038b8a ]
Only users of upc_req in kernel side fs/coda/psdev.c and fs/coda/upcall.c already include linux/coda_psdev.h.
Suggested by Jan Harkes jaharkes@cs.cmu.edu in https://lore.kernel.org/lkml/20150531111913.GA23377@cs.cmu.edu/
Fixes these include/uapi/linux/coda_psdev.h compilation errors in userspace:
linux/coda_psdev.h:12:19: error: field `uc_chain' has incomplete type struct list_head uc_chain; ^ linux/coda_psdev.h:13:2: error: unknown type name `caddr_t' caddr_t uc_data; ^ linux/coda_psdev.h:14:2: error: unknown type name `u_short' u_short uc_flags; ^ linux/coda_psdev.h:15:2: error: unknown type name `u_short' u_short uc_inSize; /* Size is at most 5000 bytes */ ^ linux/coda_psdev.h:16:2: error: unknown type name `u_short' u_short uc_outSize; ^ linux/coda_psdev.h:17:2: error: unknown type name `u_short' u_short uc_opcode; /* copied from data to save lookup */ ^ linux/coda_psdev.h:19:2: error: unknown type name `wait_queue_head_t' wait_queue_head_t uc_sleep; /* process' wait queue */ ^
Link: http://lkml.kernel.org/r/9f99f5ce6a0563d5266e6cf7aa9585aac2cae971.1558117389... Signed-off-by: Mikko Rapeli mikko.rapeli@iki.fi Signed-off-by: Jan Harkes jaharkes@cs.cmu.edu Cc: Arnd Bergmann arnd@arndb.de Cc: Colin Ian King colin.king@canonical.com Cc: Dan Carpenter dan.carpenter@oracle.com Cc: David Howells dhowells@redhat.com Cc: Fabian Frederick fabf@skynet.be Cc: Sam Protsenko semen.protsenko@linaro.org Cc: Yann Droneaud ydroneaud@opteya.com Cc: Zhouyang Jia jiazhouyang09@gmail.com Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/linux/coda_psdev.h | 11 +++++++++++ include/uapi/linux/coda_psdev.h | 13 ------------- 2 files changed, 11 insertions(+), 13 deletions(-)
diff --git a/include/linux/coda_psdev.h b/include/linux/coda_psdev.h index 5b8721efa948..fe1466daf291 100644 --- a/include/linux/coda_psdev.h +++ b/include/linux/coda_psdev.h @@ -19,6 +19,17 @@ struct venus_comm { struct mutex vc_mutex; };
+/* messages between coda filesystem in kernel and Venus */ +struct upc_req { + struct list_head uc_chain; + caddr_t uc_data; + u_short uc_flags; + u_short uc_inSize; /* Size is at most 5000 bytes */ + u_short uc_outSize; + u_short uc_opcode; /* copied from data to save lookup */ + int uc_unique; + wait_queue_head_t uc_sleep; /* process' wait queue */ +};
static inline struct venus_comm *coda_vcp(struct super_block *sb) { diff --git a/include/uapi/linux/coda_psdev.h b/include/uapi/linux/coda_psdev.h index 79d05981fc4b..e2c44d2f7d5b 100644 --- a/include/uapi/linux/coda_psdev.h +++ b/include/uapi/linux/coda_psdev.h @@ -6,19 +6,6 @@ #define CODA_PSDEV_MAJOR 67 #define MAX_CODADEVS 5 /* how many do we allow */
- -/* messages between coda filesystem in kernel and Venus */ -struct upc_req { - struct list_head uc_chain; - caddr_t uc_data; - u_short uc_flags; - u_short uc_inSize; /* Size is at most 5000 bytes */ - u_short uc_outSize; - u_short uc_opcode; /* copied from data to save lookup */ - int uc_unique; - wait_queue_head_t uc_sleep; /* process' wait queue */ -}; - #define CODA_REQ_ASYNC 0x1 #define CODA_REQ_READ 0x2 #define CODA_REQ_WRITE 0x4
From: Miroslav Lichvar mlichvar@redhat.com
[ Upstream commit 5515e9a6273b8c02034466bcbd717ac9f53dab99 ]
The PPS assert/clear offset corrections are set by the PPS_SETPARAMS ioctl in the pps_ktime structs, which also contain flags. The flags are not initialized by applications (using the timepps.h header) and they are not used by the kernel for anything except returning them back in the PPS_GETPARAMS ioctl.
Set the flags to zero to make it clear they are unused and avoid leaking uninitialized data of the PPS_SETPARAMS caller to other applications that have a read access to the PPS device.
Link: http://lkml.kernel.org/r/20190702092251.24303-1-mlichvar@redhat.com Signed-off-by: Miroslav Lichvar mlichvar@redhat.com Reviewed-by: Thomas Gleixner tglx@linutronix.de Acked-by: Rodolfo Giometti giometti@enneenne.com Cc: Greg KH greg@kroah.com Cc: Dan Carpenter dan.carpenter@oracle.com Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pps/pps.c | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/drivers/pps/pps.c b/drivers/pps/pps.c index 2f07cd615665..76ae38450aea 100644 --- a/drivers/pps/pps.c +++ b/drivers/pps/pps.c @@ -129,6 +129,14 @@ static long pps_cdev_ioctl(struct file *file, pps->params.mode |= PPS_CANWAIT; pps->params.api_version = PPS_API_VERS;
+ /* + * Clear unused fields of pps_kparams to avoid leaking + * uninitialized data of the PPS_SETPARAMS caller via + * PPS_GETPARAMS + */ + pps->params.assert_off_tu.flags = 0; + pps->params.clear_off_tu.flags = 0; + spin_unlock_irq(&pps->lock);
break;
From: Kees Cook keescook@chromium.org
[ Upstream commit a318f12ed8843cfac53198390c74a565c632f417 ]
Andreas Christoforou reported:
UBSAN: Undefined behaviour in ipc/mqueue.c:414:49 signed integer overflow: 9 * 2305843009213693951 cannot be represented in type 'long int' ... Call Trace: mqueue_evict_inode+0x8e7/0xa10 ipc/mqueue.c:414 evict+0x472/0x8c0 fs/inode.c:558 iput_final fs/inode.c:1547 [inline] iput+0x51d/0x8c0 fs/inode.c:1573 mqueue_get_inode+0x8eb/0x1070 ipc/mqueue.c:320 mqueue_create_attr+0x198/0x440 ipc/mqueue.c:459 vfs_mkobj+0x39e/0x580 fs/namei.c:2892 prepare_open ipc/mqueue.c:731 [inline] do_mq_open+0x6da/0x8e0 ipc/mqueue.c:771
Which could be triggered by:
struct mq_attr attr = { .mq_flags = 0, .mq_maxmsg = 9, .mq_msgsize = 0x1fffffffffffffff, .mq_curmsgs = 0, };
if (mq_open("/testing", 0x40, 3, &attr) == (mqd_t) -1) perror("mq_open");
mqueue_get_inode() was correctly rejecting the giant mq_msgsize, and preparing to return -EINVAL. During the cleanup, it calls mqueue_evict_inode() which performed resource usage tracking math for updating "user", before checking if there was a valid "user" at all (which would indicate that the calculations would be sane). Instead, delay this check to after seeing a valid "user".
The overflow was real, but the results went unused, so while the flaw is harmless, it's noisy for kernel fuzzers, so just fix it by moving the calculation under the non-NULL "user" where it actually gets used.
Link: http://lkml.kernel.org/r/201906072207.ECB65450@keescook Signed-off-by: Kees Cook keescook@chromium.org Reported-by: Andreas Christoforou andreaschristofo@gmail.com Acked-by: "Eric W. Biederman" ebiederm@xmission.com Cc: Al Viro viro@zeniv.linux.org.uk Cc: Arnd Bergmann arnd@arndb.de Cc: Davidlohr Bueso dave@stgolabs.net Cc: Manfred Spraul manfred@colorfullife.com Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- ipc/mqueue.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-)
diff --git a/ipc/mqueue.c b/ipc/mqueue.c index 6ed74825ab54..2a39784d5704 100644 --- a/ipc/mqueue.c +++ b/ipc/mqueue.c @@ -371,7 +371,6 @@ static void mqueue_evict_inode(struct inode *inode) { struct mqueue_inode_info *info; struct user_struct *user; - unsigned long mq_bytes, mq_treesize; struct ipc_namespace *ipc_ns; struct msg_msg *msg, *nmsg; LIST_HEAD(tmp_msg); @@ -394,16 +393,18 @@ static void mqueue_evict_inode(struct inode *inode) free_msg(msg); }
- /* Total amount of bytes accounted for the mqueue */ - mq_treesize = info->attr.mq_maxmsg * sizeof(struct msg_msg) + - min_t(unsigned int, info->attr.mq_maxmsg, MQ_PRIO_MAX) * - sizeof(struct posix_msg_tree_node); - - mq_bytes = mq_treesize + (info->attr.mq_maxmsg * - info->attr.mq_msgsize); - user = info->user; if (user) { + unsigned long mq_bytes, mq_treesize; + + /* Total amount of bytes accounted for the mqueue */ + mq_treesize = info->attr.mq_maxmsg * sizeof(struct msg_msg) + + min_t(unsigned int, info->attr.mq_maxmsg, MQ_PRIO_MAX) * + sizeof(struct posix_msg_tree_node); + + mq_bytes = mq_treesize + (info->attr.mq_maxmsg * + info->attr.mq_msgsize); + spin_lock(&mq_lock); user->mq_bytes -= mq_bytes; /*
From: Denis Efremov efremov@ispras.ru
[ Upstream commit f3554aeb991214cbfafd17d55e2bfddb50282e32 ]
This fixes a divide by zero error in the setup_format_params function of the floppy driver.
Two consecutive ioctls can trigger the bug: The first one should set the drive geometry with such .sect and .rate values for the F_SECT_PER_TRACK to become zero. Next, the floppy format operation should be called.
A floppy disk is not required to be inserted. An unprivileged user could trigger the bug if the device is accessible.
The patch checks F_SECT_PER_TRACK for a non-zero value in the set_geometry function. The proper check should involve a reasonable upper limit for the .sect and .rate fields, but it could change the UAPI.
The patch also checks F_SECT_PER_TRACK in the setup_format_params, and cancels the formatting operation in case of zero.
The bug was found by syzkaller.
Signed-off-by: Denis Efremov efremov@ispras.ru Tested-by: Willy Tarreau w@1wt.eu Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/block/floppy.c | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index 2daa5b84abbc..42ae1d2d8243 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -2113,6 +2113,9 @@ static void setup_format_params(int track) raw_cmd->kernel_data = floppy_track_buffer; raw_cmd->length = 4 * F_SECT_PER_TRACK;
+ if (!F_SECT_PER_TRACK) + return; + /* allow for about 30ms for data transport per track */ head_shift = (F_SECT_PER_TRACK + 5) / 6;
@@ -3235,6 +3238,8 @@ static int set_geometry(unsigned int cmd, struct floppy_struct *g, /* sanity checking for parameters. */ if (g->sect <= 0 || g->head <= 0 || + /* check for zero in F_SECT_PER_TRACK */ + (unsigned char)((g->sect << 2) >> FD_SIZECODE(g)) == 0 || g->track <= 0 || g->track > UDP->tracks >> STRETCH(g) || /* check if reserved bits are set */ (g->stretch & ~(FD_STRETCH | FD_SWAPSIDES | FD_SECTBASEMASK)) != 0)
From: Denis Efremov efremov@ispras.ru
[ Upstream commit da99466ac243f15fbba65bd261bfc75ffa1532b6 ]
This fixes a global out-of-bounds read access in the copy_buffer function of the floppy driver.
The FDDEFPRM ioctl allows one to set the geometry of a disk. The sect and head fields (unsigned int) of the floppy_drive structure are used to compute the max_sector (int) in the make_raw_rw_request function. It is possible to overflow the max_sector. Next, max_sector is passed to the copy_buffer function and used in one of the memcpy calls.
An unprivileged user could trigger the bug if the device is accessible, but requires a floppy disk to be inserted.
The patch adds the check for the .sect * .head multiplication for not overflowing in the set_geometry function.
The bug was found by syzkaller.
Signed-off-by: Denis Efremov efremov@ispras.ru Tested-by: Willy Tarreau w@1wt.eu Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/block/floppy.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index 42ae1d2d8243..7516fed84ae9 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -3236,8 +3236,10 @@ static int set_geometry(unsigned int cmd, struct floppy_struct *g, int cnt;
/* sanity checking for parameters. */ - if (g->sect <= 0 || - g->head <= 0 || + if ((int)g->sect <= 0 || + (int)g->head <= 0 || + /* check for overflow in max_sector */ + (int)(g->sect * g->head) <= 0 || /* check for zero in F_SECT_PER_TRACK */ (unsigned char)((g->sect << 2) >> FD_SIZECODE(g)) == 0 || g->track <= 0 || g->track > UDP->tracks >> STRETCH(g) ||
From: Josh Poimboeuf jpoimboe@redhat.com
[ Upstream commit 3901336ed9887b075531bffaeef7742ba614058b ]
After making a change to improve objtool's sibling call detection, it started showing the following warning:
arch/x86/kvm/vmx/nested.o: warning: objtool: .fixup+0x15: sibling call from callable instruction with modified stack frame
The problem is the ____kvm_handle_fault_on_reboot() macro. It does a fake call by pushing a fake RIP and doing a jump. That tricks the unwinder into printing the function which triggered the exception, rather than the .fixup code.
Instead of the hack to make it look like the original function made the call, just change the macro so that the original function actually does make the call. This allows removal of the hack, and also makes objtool happy.
I triggered a vmx instruction exception and verified that the stack trace is still sane:
kernel BUG at arch/x86/kvm/x86.c:358! invalid opcode: 0000 [#1] SMP PTI CPU: 28 PID: 4096 Comm: qemu-kvm Not tainted 5.2.0+ #16 Hardware name: Lenovo THINKSYSTEM SD530 -[7X2106Z000]-/-[7X2106Z000]-, BIOS -[TEE113Z-1.00]- 07/17/2017 RIP: 0010:kvm_spurious_fault+0x5/0x10 Code: 00 00 00 00 00 8b 44 24 10 89 d2 45 89 c9 48 89 44 24 10 8b 44 24 08 48 89 44 24 08 e9 d4 40 22 00 0f 1f 40 00 0f 1f 44 00 00 <0f> 0b 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 55 49 89 fd 41 RSP: 0018:ffffbf91c683bd00 EFLAGS: 00010246 RAX: 000061f040000000 RBX: ffff9e159c77bba0 RCX: ffff9e15a5c87000 RDX: 0000000665c87000 RSI: ffff9e15a5c87000 RDI: ffff9e159c77bba0 RBP: 0000000000000000 R08: 0000000000000000 R09: ffff9e15a5c87000 R10: 0000000000000000 R11: fffff8f2d99721c0 R12: ffff9e159c77bba0 R13: ffffbf91c671d960 R14: ffff9e159c778000 R15: 0000000000000000 FS: 00007fa341cbe700(0000) GS:ffff9e15b7400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fdd38356804 CR3: 00000006759de003 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: loaded_vmcs_init+0x4f/0xe0 alloc_loaded_vmcs+0x38/0xd0 vmx_create_vcpu+0xf7/0x600 kvm_vm_ioctl+0x5e9/0x980 ? __switch_to_asm+0x40/0x70 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 ? __switch_to_asm+0x34/0x70 ? free_one_page+0x13f/0x4e0 do_vfs_ioctl+0xa4/0x630 ksys_ioctl+0x60/0x90 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x55/0x1c0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fa349b1ee5b
Signed-off-by: Josh Poimboeuf jpoimboe@redhat.com Signed-off-by: Thomas Gleixner tglx@linutronix.de Acked-by: Paolo Bonzini pbonzini@redhat.com Acked-by: Peter Zijlstra (Intel) peterz@infradead.org Link: https://lkml.kernel.org/r/64a9b64d127e87b6920a97afde8e96ea76f6524e.156341331... Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/include/asm/kvm_host.h | 34 ++++++++++++++++++--------------- 1 file changed, 19 insertions(+), 15 deletions(-)
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h index 2cb49ac1b2b2..39f202462029 100644 --- a/arch/x86/include/asm/kvm_host.h +++ b/arch/x86/include/asm/kvm_host.h @@ -1184,25 +1184,29 @@ enum { #define kvm_arch_vcpu_memslots_id(vcpu) ((vcpu)->arch.hflags & HF_SMM_MASK ? 1 : 0) #define kvm_memslots_for_spte_role(kvm, role) __kvm_memslots(kvm, (role).smm)
+asmlinkage void __noreturn kvm_spurious_fault(void); + /* * Hardware virtualization extension instructions may fault if a * reboot turns off virtualization while processes are running. - * Trap the fault and ignore the instruction if that happens. + * Usually after catching the fault we just panic; during reboot + * instead the instruction is ignored. */ -asmlinkage void kvm_spurious_fault(void); - -#define ____kvm_handle_fault_on_reboot(insn, cleanup_insn) \ - "666: " insn "\n\t" \ - "668: \n\t" \ - ".pushsection .fixup, "ax" \n" \ - "667: \n\t" \ - cleanup_insn "\n\t" \ - "cmpb $0, kvm_rebooting \n\t" \ - "jne 668b \n\t" \ - __ASM_SIZE(push) " $666b \n\t" \ - "jmp kvm_spurious_fault \n\t" \ - ".popsection \n\t" \ - _ASM_EXTABLE(666b, 667b) +#define ____kvm_handle_fault_on_reboot(insn, cleanup_insn) \ + "666: \n\t" \ + insn "\n\t" \ + "jmp 668f \n\t" \ + "667: \n\t" \ + "call kvm_spurious_fault \n\t" \ + "668: \n\t" \ + ".pushsection .fixup, "ax" \n\t" \ + "700: \n\t" \ + cleanup_insn "\n\t" \ + "cmpb $0, kvm_rebooting\n\t" \ + "je 667b \n\t" \ + "jmp 668b \n\t" \ + ".popsection \n\t" \ + _ASM_EXTABLE(666b, 700b)
#define __kvm_handle_fault_on_reboot(insn) \ ____kvm_handle_fault_on_reboot(insn, "")
linux-stable-mirror@lists.linaro.org
-
Sasha Levin