From: Halil Pasic pasic@linux.ibm.com

commit ddbd89deb7d32b1fbb879f48d68fda1a8ac58e8e upstream.

The problem I'm addressing was discovered by the LTP test covering cve-2018-1000204.

A short description of what happens follows: 1) The test case issues a command code 00 (TEST UNIT READY) via the SG_IO interface with: dxfer_len == 524288, dxdfer_dir == SG_DXFER_FROM_DEV and a corresponding dxferp. The peculiar thing about this is that TUR is not reading from the device. 2) In sg_start_req() the invocation of blk_rq_map_user() effectively bounces the user-space buffer. As if the device was to transfer into it. Since commit a45b599ad808 ("scsi: sg: allocate with __GFP_ZERO in sg_build_indirect()") we make sure this first bounce buffer is allocated with GFP_ZERO. 3) For the rest of the story we keep ignoring that we have a TUR, so the device won't touch the buffer we prepare as if the we had a DMA_FROM_DEVICE type of situation. My setup uses a virtio-scsi device and the buffer allocated by SG is mapped by the function virtqueue_add_split() which uses DMA_FROM_DEVICE for the "in" sgs (here scatter-gather and not scsi generics). This mapping involves bouncing via the swiotlb (we need swiotlb to do virtio in protected guest like s390 Secure Execution, or AMD SEV). 4) When the SCSI TUR is done, we first copy back the content of the second (that is swiotlb) bounce buffer (which most likely contains some previous IO data), to the first bounce buffer, which contains all zeros. Then we copy back the content of the first bounce buffer to the user-space buffer. 5) The test case detects that the buffer, which it zero-initialized, ain't all zeros and fails.

One can argue that this is an swiotlb problem, because without swiotlb we leak all zeros, and the swiotlb should be transparent in a sense that it does not affect the outcome (if all other participants are well behaved).

Copying the content of the original buffer into the swiotlb buffer is the only way I can think of to make swiotlb transparent in such scenarios. So let's do just that if in doubt, but allow the driver to tell us that the whole mapped buffer is going to be overwritten, in which case we can preserve the old behavior and avoid the performance impact of the extra bounce.

Signed-off-by: Halil Pasic pasic@linux.ibm.com Signed-off-by: Christoph Hellwig hch@lst.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- Documentation/DMA-attributes.txt | 10 ++++++++++ include/linux/dma-mapping.h | 8 ++++++++ kernel/dma/swiotlb.c | 3 ++- 3 files changed, 20 insertions(+), 1 deletion(-)

--- a/Documentation/DMA-attributes.txt +++ b/Documentation/DMA-attributes.txt @@ -156,3 +156,13 @@ accesses to DMA buffers in both privileg subsystem that the buffer is fully accessible at the elevated privilege level (and ideally inaccessible or at least read-only at the lesser-privileged levels). + +DMA_ATTR_PRIVILEGED +------------------- + +Some advanced peripherals such as remote processors and GPUs perform +accesses to DMA buffers in both privileged "supervisor" and unprivileged +"user" modes. This attribute is used to indicate to the DMA-mapping +subsystem that the buffer is fully accessible at the elevated privilege +level (and ideally inaccessible or at least read-only at the +lesser-privileged levels). --- a/include/linux/dma-mapping.h +++ b/include/linux/dma-mapping.h @@ -71,6 +71,14 @@ #define DMA_ATTR_PRIVILEGED (1UL << 9)

/* + * This is a hint to the DMA-mapping subsystem that the device is expected + * to overwrite the entire mapped size, thus the caller does not require any + * of the previous buffer contents to be preserved. This allows + * bounce-buffering implementations to optimise DMA_FROM_DEVICE transfers. + */ +#define DMA_ATTR_OVERWRITE (1UL << 10) + +/* * A dma_addr_t can hold any valid DMA or bus address for the platform. * It can be given to a device to use as a DMA source or target. A CPU cannot * reference a dma_addr_t directly because there may be translation between --- a/kernel/dma/swiotlb.c +++ b/kernel/dma/swiotlb.c @@ -572,7 +572,8 @@ found: for (i = 0; i < nslots; i++) io_tlb_orig_addr[index+i] = orig_addr + (i << IO_TLB_SHIFT); if (!(attrs & DMA_ATTR_SKIP_CPU_SYNC) && - (dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL)) + (!(attrs & DMA_ATTR_OVERWRITE) || dir == DMA_TO_DEVICE || + dir == DMA_BIDIRECTIONAL)) swiotlb_bounce(orig_addr, tlb_addr, mapping_size, DMA_TO_DEVICE);

return tlb_addr;

From: Johan Hovold johan@kernel.org

commit c4b9c570965f75d0d55e639747f1e5ccdad2fae0 upstream.

Add a new "simple" driver for certain Nokia phones, including Nokia 130 (RM-1035) which exposes two serial ports in "charging only" mode:

Bus 001 Device 009: ID 0421:069a Nokia Mobile Phones 130 [RM-1035] (Charging only) Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x0421 Nokia Mobile Phones idProduct 0x069a 130 [RM-1035] (Charging only) bcdDevice 1.00 iManufacturer 1 Nokia iProduct 2 Nokia 130 (RM-1035) iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0037 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 255 Vendor Specific Protocol iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Status: 0x0000 (Bus Powered)

Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220228084919.10656-1-johan@kernel.org Signed-off-by: Johan Hovold johan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/serial/Kconfig | 1 + drivers/usb/serial/usb-serial-simple.c | 7 +++++++ 2 files changed, 8 insertions(+)

--- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -66,6 +66,7 @@ config USB_SERIAL_SIMPLE - Libtransistor USB console - a number of Motorola phones - Motorola Tetra devices + - Nokia mobile phones - Novatel Wireless GPS receivers - Siemens USB/MPI adapter. - ViVOtech ViVOpay USB device. --- a/drivers/usb/serial/usb-serial-simple.c +++ b/drivers/usb/serial/usb-serial-simple.c @@ -91,6 +91,11 @@ DEVICE(moto_modem, MOTO_IDS); { USB_DEVICE(0x0cad, 0x9016) } /* TPG2200 */ DEVICE(motorola_tetra, MOTOROLA_TETRA_IDS);

+/* Nokia mobile phone driver */ +#define NOKIA_IDS() \ + { USB_DEVICE(0x0421, 0x069a) } /* Nokia 130 (RM-1035) */ +DEVICE(nokia, NOKIA_IDS); + /* Novatel Wireless GPS driver */ #define NOVATEL_IDS() \ { USB_DEVICE(0x09d7, 0x0100) } /* NovAtel FlexPack GPS */ @@ -123,6 +128,7 @@ static struct usb_serial_driver * const &vivopay_device, &moto_modem_device, &motorola_tetra_device, + &nokia_device, &novatel_gps_device, &hp4x_device, &suunto_device, @@ -140,6 +146,7 @@ static const struct usb_device_id id_tab VIVOPAY_IDS(), MOTO_IDS(), MOTOROLA_TETRA_IDS(), + NOKIA_IDS(), NOVATEL_IDS(), HP4X_IDS(), SUUNTO_IDS(),

From: Yajun Deng yajun.deng@linux.dev

commit b37a466837393af72fe8bcb8f1436410f3f173f3 upstream.

Add the case if dev is NULL in dev_{put, hold}, so the caller doesn't need to care whether dev is NULL or not.

Signed-off-by: Yajun Deng yajun.deng@linux.dev Signed-off-by: David S. Miller davem@davemloft.net Cc: Pavel Machek pavel@denx.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- include/linux/netdevice.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -3777,7 +3777,8 @@ void netdev_run_todo(void); */ static inline void dev_put(struct net_device *dev) { - this_cpu_dec(*dev->pcpu_refcnt); + if (dev) + this_cpu_dec(*dev->pcpu_refcnt); }

/** @@ -3788,7 +3789,8 @@ static inline void dev_put(struct net_de */ static inline void dev_hold(struct net_device *dev) { - this_cpu_inc(*dev->pcpu_refcnt); + if (dev) + this_cpu_inc(*dev->pcpu_refcnt); }

/* Carrier loss detection, dial on demand. The functions netif_carrier_on

From: Lina Wang lina.wang@mediatek.com

[ Upstream commit 4ff2980b6bd2aa6b4ded3ce3b7c0ccfab29980af ]

in tunnel mode, if outer interface(ipv4) is less, it is easily to let inner IPV6 mtu be less than 1280. If so, a Packet Too Big ICMPV6 message is received. When send again, packets are fragmentized with 1280, they are still rejected with ICMPV6(Packet Too Big) by xfrmi_xmit2().

According to RFC4213 Section3.2.2: if (IPv4 path MTU - 20) is less than 1280 if packet is larger than 1280 bytes Send ICMPv6 "packet too big" with MTU=1280 Drop packet else Encapsulate but do not set the Don't Fragment flag in the IPv4 header. The resulting IPv4 packet might be fragmented by the IPv4 layer on the encapsulator or by some router along the IPv4 path. endif else if packet is larger than (IPv4 path MTU - 20) Send ICMPv6 "packet too big" with MTU = (IPv4 path MTU - 20). Drop packet. else Encapsulate and set the Don't Fragment flag in the IPv4 header. endif endif Packets should be fragmentized with ipv4 outer interface, so change it.

After it is fragemtized with ipv4, there will be double fragmenation. No.48 & No.51 are ipv6 fragment packets, No.48 is double fragmentized, then tunneled with IPv4(No.49& No.50), which obey spec. And received peer cannot decrypt it rightly.

48 2002::10 2002::11 1296(length) IPv6 fragment (off=0 more=y ident=0xa20da5bc nxt=50) 49 0x0000 (0) 2002::10 2002::11 1304 IPv6 fragment (off=0 more=y ident=0x7448042c nxt=44) 50 0x0000 (0) 2002::10 2002::11 200 ESP (SPI=0x00035000) 51 2002::10 2002::11 180 Echo (ping) request 52 0x56dc 2002::10 2002::11 248 IPv6 fragment (off=1232 more=n ident=0xa20da5bc nxt=50)

xfrm6_noneed_fragment has fixed above issues. Finally, it acted like below: 1 0x6206 192.168.1.138 192.168.1.1 1316 Fragmented IP protocol (proto=Encap Security Payload 50, off=0, ID=6206) [Reassembled in #2] 2 0x6206 2002::10 2002::11 88 IPv6 fragment (off=0 more=y ident=0x1f440778 nxt=50) 3 0x0000 2002::10 2002::11 248 ICMPv6 Echo (ping) request

Signed-off-by: Lina Wang lina.wang@mediatek.com Signed-off-by: Steffen Klassert steffen.klassert@secunet.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/ipv6/xfrm6_output.c | 16 ++++++++++++++++ net/xfrm/xfrm_interface.c | 5 ++++- 2 files changed, 20 insertions(+), 1 deletion(-)

diff --git a/net/ipv6/xfrm6_output.c b/net/ipv6/xfrm6_output.c index 6b0ed6c593e2..a6f13fab963f 100644 --- a/net/ipv6/xfrm6_output.c +++ b/net/ipv6/xfrm6_output.c @@ -140,6 +140,19 @@ static int __xfrm6_output_finish(struct net *net, struct sock *sk, struct sk_buf return __xfrm6_output_state_finish(x, sk, skb); }

+static int xfrm6_noneed_fragment(struct sk_buff *skb) +{ + struct frag_hdr *fh; + u8 prevhdr = ipv6_hdr(skb)->nexthdr; + + if (prevhdr != NEXTHDR_FRAGMENT) + return 0; + fh = (struct frag_hdr *)(skb->data + sizeof(struct ipv6hdr)); + if (fh->nexthdr == NEXTHDR_ESP || fh->nexthdr == NEXTHDR_AUTH) + return 1; + return 0; +} + static int __xfrm6_output(struct net *net, struct sock *sk, struct sk_buff *skb) { struct dst_entry *dst = skb_dst(skb); @@ -168,6 +181,9 @@ static int __xfrm6_output(struct net *net, struct sock *sk, struct sk_buff *skb) xfrm6_local_rxpmtu(skb, mtu); kfree_skb(skb); return -EMSGSIZE; + } else if (toobig && xfrm6_noneed_fragment(skb)) { + skb->ignore_df = 1; + goto skip_frag; } else if (!skb->ignore_df && toobig && skb->sk) { xfrm_local_error(skb, mtu); kfree_skb(skb); diff --git a/net/xfrm/xfrm_interface.c b/net/xfrm/xfrm_interface.c index 3932d3aaff27..4cfa79e04e3d 100644 --- a/net/xfrm/xfrm_interface.c +++ b/net/xfrm/xfrm_interface.c @@ -300,7 +300,10 @@ xfrmi_xmit2(struct sk_buff *skb, struct net_device *dev, struct flowi *fl) if (mtu < IPV6_MIN_MTU) mtu = IPV6_MIN_MTU;

- icmpv6_ndo_send(skb, ICMPV6_PKT_TOOBIG, 0, mtu); + if (skb->len > 1280) + icmpv6_ndo_send(skb, ICMPV6_PKT_TOOBIG, 0, mtu); + else + goto xmit; } else { if (!(ip_hdr(skb)->frag_off & htons(IP_DF))) goto xmit;

From: Zheyu Ma zheyuma97@gmail.com

[ Upstream commit bb77bd31c281f70ec77c9c4f584950a779e05cf8 ]

When the driver fails to register net device, it should free the DMA region first, and then do other cleanup.

Signed-off-by: Zheyu Ma zheyuma97@gmail.com Reviewed-by: Andrew Lunn andrew@lunn.ch Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/sun/sunhme.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/sun/sunhme.c b/drivers/net/ethernet/sun/sunhme.c index d007dfeba5c3..3133f903279c 100644 --- a/drivers/net/ethernet/sun/sunhme.c +++ b/drivers/net/ethernet/sun/sunhme.c @@ -3164,7 +3164,7 @@ static int happy_meal_pci_probe(struct pci_dev *pdev, if (err) { printk(KERN_ERR "happymeal(PCI): Cannot register net device, " "aborting.\n"); - goto err_out_iounmap; + goto err_out_free_coherent; }

pci_set_drvdata(pdev, hp); @@ -3197,6 +3197,10 @@ static int happy_meal_pci_probe(struct pci_dev *pdev,

return 0;

+err_out_free_coherent: + dma_free_coherent(hp->dma_dev, PAGE_SIZE, + hp->happy_block, hp->hblock_dvma); + err_out_iounmap: iounmap(hp->gregs);

From: Minghao Chi (CGEL ZTE) chi.minghao@zte.com.cn

[ Upstream commit 2a760554dcba450d3ad61b32375b50ed6d59a87c ]

It is not recommened to use platform_get_resource(pdev, IORESOURCE_IRQ) for requesting IRQ's resources any more, as they can be not ready yet in case of DT-booting.

platform_get_irq() instead is a recommended way for getting IRQ even if it was not retrieved earlier.

It also makes code simpler because we're getting "int" value right away and no conversion from resource to int is required.

Reported-by: Zeal Robot zealci@zte.com.cn Signed-off-by: Minghao Chi (CGEL ZTE) chi.minghao@zte.com.cn Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/8390/mcf8390.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/net/ethernet/8390/mcf8390.c b/drivers/net/ethernet/8390/mcf8390.c index 4ad8031ab669..065fdbe66c42 100644 --- a/drivers/net/ethernet/8390/mcf8390.c +++ b/drivers/net/ethernet/8390/mcf8390.c @@ -406,12 +406,12 @@ static int mcf8390_init(struct net_device *dev) static int mcf8390_probe(struct platform_device *pdev) { struct net_device *dev; - struct resource *mem, *irq; + struct resource *mem; resource_size_t msize; - int ret; + int ret, irq;

- irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (irq == NULL) { + irq = platform_get_irq(pdev, 0); + if (irq < 0) { dev_err(&pdev->dev, "no IRQ specified?\n"); return -ENXIO; } @@ -434,7 +434,7 @@ static int mcf8390_probe(struct platform_device *pdev) SET_NETDEV_DEV(dev, &pdev->dev); platform_set_drvdata(pdev, dev);

- dev->irq = irq->start; + dev->irq = irq; dev->base_addr = mem->start;

ret = mcf8390_init(dev);

From: Haimin Zhang tcs_kernel@tencent.com

[ Upstream commit 9a564bccb78a76740ea9d75a259942df8143d02c ]

Add __GFP_ZERO flag for compose_sadb_supported in function pfkey_register to initialize the buffer of supp_skb to fix a kernel-info-leak issue. 1) Function pfkey_register calls compose_sadb_supported to request a sk_buff. 2) compose_sadb_supported calls alloc_sbk to allocate a sk_buff, but it doesn't zero it. 3) If auth_len is greater 0, then compose_sadb_supported treats the memory as a struct sadb_supported and begins to initialize. But it just initializes the field sadb_supported_len and field sadb_supported_exttype without field sadb_supported_reserved.

Reported-by: TCS Robot tcs_robot@tencent.com Signed-off-by: Haimin Zhang tcs_kernel@tencent.com Signed-off-by: Steffen Klassert steffen.klassert@secunet.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/key/af_key.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/net/key/af_key.c b/net/key/af_key.c index 406e13478b01..2ac9560020f9 100644 --- a/net/key/af_key.c +++ b/net/key/af_key.c @@ -1703,7 +1703,7 @@ static int pfkey_register(struct sock *sk, struct sk_buff *skb, const struct sad

xfrm_probe_algs();

- supp_skb = compose_sadb_supported(hdr, GFP_KERNEL); + supp_skb = compose_sadb_supported(hdr, GFP_KERNEL | __GFP_ZERO); if (!supp_skb) { if (hdr->sadb_msg_satype != SADB_SATYPE_UNSPEC) pfk->registered &= ~(1<<hdr->sadb_msg_satype);

From: Robin Murphy robin.murphy@arm.com

commit 5b61343b50590fb04a3f6be2cdc4868091757262 upstream.

For various reasons based on the allocator behaviour and typical use-cases at the time, when the max32_alloc_size optimisation was introduced it seemed reasonable to couple the reset of the tracked size to the update of cached32_node upon freeing a relevant IOVA. However, since subsequent optimisations focused on helping genuine 32-bit devices make best use of even more limited address spaces, it is now a lot more likely for cached32_node to be anywhere in a "full" 32-bit address space, and as such more likely for space to become available from IOVAs below that node being freed.

At this point, the short-cut in __cached_rbnode_delete_update() really doesn't hold up any more, and we need to fix the logic to reliably provide the expected behaviour. We still want cached32_node to only move upwards, but we should reset the allocation size if *any* 32-bit space has become available.

Reported-by: Yunfei Wang yf.wang@mediatek.com Signed-off-by: Robin Murphy robin.murphy@arm.com Reviewed-by: Miles Chen miles.chen@mediatek.com Link: https://lore.kernel.org/r/033815732d83ca73b13c11485ac39336f15c3b40.164631840... Signed-off-by: Joerg Roedel jroedel@suse.de Cc: Miles Chen miles.chen@mediatek.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/iommu/iova.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/iommu/iova.c +++ b/drivers/iommu/iova.c @@ -138,10 +138,11 @@ __cached_rbnode_delete_update(struct iov cached_iova = rb_entry(iovad->cached32_node, struct iova, node); if (free == cached_iova || (free->pfn_hi < iovad->dma_32bit_pfn && - free->pfn_lo >= cached_iova->pfn_lo)) { + free->pfn_lo >= cached_iova->pfn_lo)) iovad->cached32_node = rb_next(&free->node); + + if (free->pfn_lo < iovad->dma_32bit_pfn) iovad->max32_alloc_size = iovad->dma_32bit_pfn; - }

cached_iova = rb_entry(iovad->cached_node, struct iova, node); if (free->pfn_lo >= cached_iova->pfn_lo)

From: Xie Yongji xieyongji@bytedance.com

commit 570b1cac477643cbf01a45fa5d018430a1fddbce upstream.

There are some duplicated codes to validate the block size in block drivers. This limitation actually comes from block layer, so this patch tries to add a new block layer helper for that.

Signed-off-by: Xie Yongji xieyongji@bytedance.com Link: https://lore.kernel.org/r/20211026144015.188-2-xieyongji@bytedance.com Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Lee Jones lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- include/linux/blkdev.h | 8 ++++++++ 1 file changed, 8 insertions(+)

--- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -59,6 +59,14 @@ struct blk_stat_callback; */ #define BLKCG_MAX_POLS 5

+static inline int blk_validate_block_size(unsigned int bsize) +{ + if (bsize < 512 || bsize > PAGE_SIZE || !is_power_of_2(bsize)) + return -EINVAL; + + return 0; +} + typedef void (rq_end_io_fn)(struct request *, blk_status_t);

/*

From: Alan Stern stern@rowland.harvard.edu

commit 1892bf90677abcad7f06e897e308f5c3e3618dd4 upstream.

The kernel test robot found a problem with the ene_ub6250 subdriver in usb-storage: It uses structures containing bitfields to represent hardware bits in its SD_STATUS, MS_STATUS, and SM_STATUS bytes. This is not safe; it presumes a particular bit ordering and it assumes the compiler will not insert padding, neither of which is guaranteed.

This patch fixes the problem by changing the structures to simple u8 values, with the bitfields replaced by bitmask constants.

CC: stable@vger.kernel.org Signed-off-by: Alan Stern stern@rowland.harvard.edu Link: https://lore.kernel.org/r/YjOcbuU106UpJ/V8@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/storage/ene_ub6250.c | 153 +++++++++++++++++++-------------------- 1 file changed, 75 insertions(+), 78 deletions(-)

--- a/drivers/usb/storage/ene_ub6250.c +++ b/drivers/usb/storage/ene_ub6250.c @@ -237,36 +237,33 @@ static struct us_unusual_dev ene_ub6250_ #define memstick_logaddr(logadr1, logadr0) ((((u16)(logadr1)) << 8) | (logadr0))

-struct SD_STATUS { - u8 Insert:1; - u8 Ready:1; - u8 MediaChange:1; - u8 IsMMC:1; - u8 HiCapacity:1; - u8 HiSpeed:1; - u8 WtP:1; - u8 Reserved:1; -}; - -struct MS_STATUS { - u8 Insert:1; - u8 Ready:1; - u8 MediaChange:1; - u8 IsMSPro:1; - u8 IsMSPHG:1; - u8 Reserved1:1; - u8 WtP:1; - u8 Reserved2:1; -}; - -struct SM_STATUS { - u8 Insert:1; - u8 Ready:1; - u8 MediaChange:1; - u8 Reserved:3; - u8 WtP:1; - u8 IsMS:1; -}; +/* SD_STATUS bits */ +#define SD_Insert BIT(0) +#define SD_Ready BIT(1) +#define SD_MediaChange BIT(2) +#define SD_IsMMC BIT(3) +#define SD_HiCapacity BIT(4) +#define SD_HiSpeed BIT(5) +#define SD_WtP BIT(6) + /* Bit 7 reserved */ + +/* MS_STATUS bits */ +#define MS_Insert BIT(0) +#define MS_Ready BIT(1) +#define MS_MediaChange BIT(2) +#define MS_IsMSPro BIT(3) +#define MS_IsMSPHG BIT(4) + /* Bit 5 reserved */ +#define MS_WtP BIT(6) + /* Bit 7 reserved */ + +/* SM_STATUS bits */ +#define SM_Insert BIT(0) +#define SM_Ready BIT(1) +#define SM_MediaChange BIT(2) + /* Bits 3-5 reserved */ +#define SM_WtP BIT(6) +#define SM_IsMS BIT(7)

struct ms_bootblock_cis { u8 bCistplDEVICE[6]; /* 0 */ @@ -437,9 +434,9 @@ struct ene_ub6250_info { u8 *bbuf;

/* for 6250 code */ - struct SD_STATUS SD_Status; - struct MS_STATUS MS_Status; - struct SM_STATUS SM_Status; + u8 SD_Status; + u8 MS_Status; + u8 SM_Status;

/* ----- SD Control Data ---------------- */ /*SD_REGISTER SD_Regs; */ @@ -602,7 +599,7 @@ static int sd_scsi_test_unit_ready(struc { struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;

- if (info->SD_Status.Insert && info->SD_Status.Ready) + if ((info->SD_Status & SD_Insert) && (info->SD_Status & SD_Ready)) return USB_STOR_TRANSPORT_GOOD; else { ene_sd_init(us); @@ -622,7 +619,7 @@ static int sd_scsi_mode_sense(struct us_ 0x0b, 0x00, 0x80, 0x08, 0x00, 0x00, 0x71, 0xc0, 0x00, 0x00, 0x02, 0x00 };

- if (info->SD_Status.WtP) + if (info->SD_Status & SD_WtP) usb_stor_set_xfer_buf(mediaWP, 12, srb); else usb_stor_set_xfer_buf(mediaNoWP, 12, srb); @@ -641,9 +638,9 @@ static int sd_scsi_read_capacity(struct struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;

usb_stor_dbg(us, "sd_scsi_read_capacity\n"); - if (info->SD_Status.HiCapacity) { + if (info->SD_Status & SD_HiCapacity) { bl_len = 0x200; - if (info->SD_Status.IsMMC) + if (info->SD_Status & SD_IsMMC) bl_num = info->HC_C_SIZE-1; else bl_num = (info->HC_C_SIZE + 1) * 1024 - 1; @@ -693,7 +690,7 @@ static int sd_scsi_read(struct us_data * return USB_STOR_TRANSPORT_ERROR; }

- if (info->SD_Status.HiCapacity) + if (info->SD_Status & SD_HiCapacity) bnByte = bn;

/* set up the command wrapper */ @@ -733,7 +730,7 @@ static int sd_scsi_write(struct us_data return USB_STOR_TRANSPORT_ERROR; }

- if (info->SD_Status.HiCapacity) + if (info->SD_Status & SD_HiCapacity) bnByte = bn;

/* set up the command wrapper */ @@ -1455,7 +1452,7 @@ static int ms_scsi_test_unit_ready(struc struct ene_ub6250_info *info = (struct ene_ub6250_info *)(us->extra);

/* pr_info("MS_SCSI_Test_Unit_Ready\n"); */ - if (info->MS_Status.Insert && info->MS_Status.Ready) { + if ((info->MS_Status & MS_Insert) && (info->MS_Status & MS_Ready)) { return USB_STOR_TRANSPORT_GOOD; } else { ene_ms_init(us); @@ -1475,7 +1472,7 @@ static int ms_scsi_mode_sense(struct us_ 0x0b, 0x00, 0x80, 0x08, 0x00, 0x00, 0x71, 0xc0, 0x00, 0x00, 0x02, 0x00 };

- if (info->MS_Status.WtP) + if (info->MS_Status & MS_WtP) usb_stor_set_xfer_buf(mediaWP, 12, srb); else usb_stor_set_xfer_buf(mediaNoWP, 12, srb); @@ -1494,7 +1491,7 @@ static int ms_scsi_read_capacity(struct

usb_stor_dbg(us, "ms_scsi_read_capacity\n"); bl_len = 0x200; - if (info->MS_Status.IsMSPro) + if (info->MS_Status & MS_IsMSPro) bl_num = info->MSP_TotalBlock - 1; else bl_num = info->MS_Lib.NumberOfLogBlock * info->MS_Lib.blockSize * 2 - 1; @@ -1649,7 +1646,7 @@ static int ms_scsi_read(struct us_data * if (bn > info->bl_num) return USB_STOR_TRANSPORT_ERROR;

- if (info->MS_Status.IsMSPro) { + if (info->MS_Status & MS_IsMSPro) { result = ene_load_bincode(us, MSP_RW_PATTERN); if (result != USB_STOR_XFER_GOOD) { usb_stor_dbg(us, "Load MPS RW pattern Fail !!\n"); @@ -1750,7 +1747,7 @@ static int ms_scsi_write(struct us_data if (bn > info->bl_num) return USB_STOR_TRANSPORT_ERROR;

- if (info->MS_Status.IsMSPro) { + if (info->MS_Status & MS_IsMSPro) { result = ene_load_bincode(us, MSP_RW_PATTERN); if (result != USB_STOR_XFER_GOOD) { pr_info("Load MSP RW pattern Fail !!\n"); @@ -1858,12 +1855,12 @@ static int ene_get_card_status(struct us

tmpreg = (u16) reg4b; reg4b = *(u32 *)(&buf[0x14]); - if (info->SD_Status.HiCapacity && !info->SD_Status.IsMMC) + if ((info->SD_Status & SD_HiCapacity) && !(info->SD_Status & SD_IsMMC)) info->HC_C_SIZE = (reg4b >> 8) & 0x3fffff;

info->SD_C_SIZE = ((tmpreg & 0x03) << 10) | (u16)(reg4b >> 22); info->SD_C_SIZE_MULT = (u8)(reg4b >> 7) & 0x07; - if (info->SD_Status.HiCapacity && info->SD_Status.IsMMC) + if ((info->SD_Status & SD_HiCapacity) && (info->SD_Status & SD_IsMMC)) info->HC_C_SIZE = *(u32 *)(&buf[0x100]);

if (info->SD_READ_BL_LEN > SD_BLOCK_LEN) { @@ -2075,6 +2072,7 @@ static int ene_ms_init(struct us_data *u u16 MSP_BlockSize, MSP_UserAreaBlocks; struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra; u8 *bbuf = info->bbuf; + unsigned int s;

printk(KERN_INFO "transport --- ENE_MSInit\n");

@@ -2099,15 +2097,16 @@ static int ene_ms_init(struct us_data *u return USB_STOR_TRANSPORT_ERROR; } /* the same part to test ENE */ - info->MS_Status = *(struct MS_STATUS *) bbuf; + info->MS_Status = bbuf[0];

- if (info->MS_Status.Insert && info->MS_Status.Ready) { - printk(KERN_INFO "Insert = %x\n", info->MS_Status.Insert); - printk(KERN_INFO "Ready = %x\n", info->MS_Status.Ready); - printk(KERN_INFO "IsMSPro = %x\n", info->MS_Status.IsMSPro); - printk(KERN_INFO "IsMSPHG = %x\n", info->MS_Status.IsMSPHG); - printk(KERN_INFO "WtP= %x\n", info->MS_Status.WtP); - if (info->MS_Status.IsMSPro) { + s = info->MS_Status; + if ((s & MS_Insert) && (s & MS_Ready)) { + printk(KERN_INFO "Insert = %x\n", !!(s & MS_Insert)); + printk(KERN_INFO "Ready = %x\n", !!(s & MS_Ready)); + printk(KERN_INFO "IsMSPro = %x\n", !!(s & MS_IsMSPro)); + printk(KERN_INFO "IsMSPHG = %x\n", !!(s & MS_IsMSPHG)); + printk(KERN_INFO "WtP= %x\n", !!(s & MS_WtP)); + if (s & MS_IsMSPro) { MSP_BlockSize = (bbuf[6] << 8) | bbuf[7]; MSP_UserAreaBlocks = (bbuf[10] << 8) | bbuf[11]; info->MSP_TotalBlock = MSP_BlockSize * MSP_UserAreaBlocks; @@ -2168,17 +2167,17 @@ static int ene_sd_init(struct us_data *u return USB_STOR_TRANSPORT_ERROR; }

- info->SD_Status = *(struct SD_STATUS *) bbuf; - if (info->SD_Status.Insert && info->SD_Status.Ready) { - struct SD_STATUS *s = &info->SD_Status; + info->SD_Status = bbuf[0]; + if ((info->SD_Status & SD_Insert) && (info->SD_Status & SD_Ready)) { + unsigned int s = info->SD_Status;

ene_get_card_status(us, bbuf); - usb_stor_dbg(us, "Insert = %x\n", s->Insert); - usb_stor_dbg(us, "Ready = %x\n", s->Ready); - usb_stor_dbg(us, "IsMMC = %x\n", s->IsMMC); - usb_stor_dbg(us, "HiCapacity = %x\n", s->HiCapacity); - usb_stor_dbg(us, "HiSpeed = %x\n", s->HiSpeed); - usb_stor_dbg(us, "WtP = %x\n", s->WtP); + usb_stor_dbg(us, "Insert = %x\n", !!(s & SD_Insert)); + usb_stor_dbg(us, "Ready = %x\n", !!(s & SD_Ready)); + usb_stor_dbg(us, "IsMMC = %x\n", !!(s & SD_IsMMC)); + usb_stor_dbg(us, "HiCapacity = %x\n", !!(s & SD_HiCapacity)); + usb_stor_dbg(us, "HiSpeed = %x\n", !!(s & SD_HiSpeed)); + usb_stor_dbg(us, "WtP = %x\n", !!(s & SD_WtP)); } else { usb_stor_dbg(us, "SD Card Not Ready --- %x\n", bbuf[0]); return USB_STOR_TRANSPORT_ERROR; @@ -2200,14 +2199,14 @@ static int ene_init(struct us_data *us)

misc_reg03 = bbuf[0]; if (misc_reg03 & 0x01) { - if (!info->SD_Status.Ready) { + if (!(info->SD_Status & SD_Ready)) { result = ene_sd_init(us); if (result != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; } } if (misc_reg03 & 0x02) { - if (!info->MS_Status.Ready) { + if (!(info->MS_Status & MS_Ready)) { result = ene_ms_init(us); if (result != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; @@ -2306,14 +2305,14 @@ static int ene_transport(struct scsi_cmn

/*US_DEBUG(usb_stor_show_command(us, srb)); */ scsi_set_resid(srb, 0); - if (unlikely(!(info->SD_Status.Ready || info->MS_Status.Ready))) + if (unlikely(!(info->SD_Status & SD_Ready) || (info->MS_Status & MS_Ready))) result = ene_init(us); if (result == USB_STOR_XFER_GOOD) { result = USB_STOR_TRANSPORT_ERROR; - if (info->SD_Status.Ready) + if (info->SD_Status & SD_Ready) result = sd_scsi_irp(us, srb);

- if (info->MS_Status.Ready) + if (info->MS_Status & MS_Ready) result = ms_scsi_irp(us, srb); } return result; @@ -2377,7 +2376,6 @@ static int ene_ub6250_probe(struct usb_i

static int ene_ub6250_resume(struct usb_interface *iface) { - u8 tmp = 0; struct us_data *us = usb_get_intfdata(iface); struct ene_ub6250_info *info = (struct ene_ub6250_info *)(us->extra);

@@ -2389,17 +2387,16 @@ static int ene_ub6250_resume(struct usb_ mutex_unlock(&us->dev_mutex);

info->Power_IsResum = true; - /*info->SD_Status.Ready = 0; */ - info->SD_Status = *(struct SD_STATUS *)&tmp; - info->MS_Status = *(struct MS_STATUS *)&tmp; - info->SM_Status = *(struct SM_STATUS *)&tmp; + /* info->SD_Status &= ~SD_Ready; */ + info->SD_Status = 0; + info->MS_Status = 0; + info->SM_Status = 0;

return 0; }

static int ene_ub6250_reset_resume(struct usb_interface *iface) { - u8 tmp = 0; struct us_data *us = usb_get_intfdata(iface); struct ene_ub6250_info *info = (struct ene_ub6250_info *)(us->extra);

@@ -2411,10 +2408,10 @@ static int ene_ub6250_reset_resume(struc * the device */ info->Power_IsResum = true; - /*info->SD_Status.Ready = 0; */ - info->SD_Status = *(struct SD_STATUS *)&tmp; - info->MS_Status = *(struct MS_STATUS *)&tmp; - info->SM_Status = *(struct SM_STATUS *)&tmp; + /* info->SD_Status &= ~SD_Ready; */ + info->SD_Status = 0; + info->MS_Status = 0; + info->SM_Status = 0;

return 0; }

From: Mathias Nyman mathias.nyman@linux.intel.com

commit 14073ce951b5919da450022c050772902f24f054 upstream.

xhci_reset() timeout was increased from 250ms to 10 seconds in order to give Renesas 720201 xHC enough time to get ready in probe.

xhci_reset() is called with interrupts disabled in other places, and waiting for 10 seconds there is not acceptable.

Add a timeout parameter to xhci_reset(), and adjust it back to 250ms when called from xhci_stop() or xhci_shutdown() where interrupts are disabled, and successful reset isn't that critical. This solves issues when deactivating host mode on platforms like SM8450.

For now don't change the timeout if xHC is reset in xhci_resume(). No issues are reported for it, and we need the reset to succeed. Locking around that reset needs to be revisited later.

Additionally change the signed integer timeout parameter in xhci_handshake() to a u64 to match the timeout value we pass to readl_poll_timeout_atomic()

Fixes: 22ceac191211 ("xhci: Increase reset timeout for Renesas 720201 host.") Cc: stable@vger.kernel.org Reported-by: Sergey Shtylyov s.shtylyov@omp.ru Reported-by: Pavan Kondeti quic_pkondeti@quicinc.com Tested-by: Pavan Kondeti quic_pkondeti@quicinc.com Signed-off-by: Mathias Nyman mathias.nyman@linux.intel.com Link: https://lore.kernel.org/r/20220303110903.1662404-2-mathias.nyman@linux.intel... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/host/xhci-hub.c | 2 +- drivers/usb/host/xhci-mem.c | 2 +- drivers/usb/host/xhci.c | 20 +++++++++----------- drivers/usb/host/xhci.h | 7 +++++-- 4 files changed, 16 insertions(+), 15 deletions(-)

--- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -674,7 +674,7 @@ static int xhci_exit_test_mode(struct xh } pm_runtime_allow(xhci_to_hcd(xhci)->self.controller); xhci->test_mode = 0; - return xhci_reset(xhci); + return xhci_reset(xhci, XHCI_RESET_SHORT_USEC); }

void xhci_set_link_state(struct xhci_hcd *xhci, struct xhci_port *port, --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -2583,7 +2583,7 @@ int xhci_mem_init(struct xhci_hcd *xhci,

fail: xhci_halt(xhci); - xhci_reset(xhci); + xhci_reset(xhci, XHCI_RESET_SHORT_USEC); xhci_mem_cleanup(xhci); return -ENOMEM; } --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -66,7 +66,7 @@ static bool td_on_ring(struct xhci_td *t * handshake done). There are two failure modes: "usec" have passed (major * hardware flakeout), or the register reads as all-ones (hardware removed). */ -int xhci_handshake(void __iomem *ptr, u32 mask, u32 done, int usec) +int xhci_handshake(void __iomem *ptr, u32 mask, u32 done, u64 timeout_us) { u32 result; int ret; @@ -74,7 +74,7 @@ int xhci_handshake(void __iomem *ptr, u3 ret = readl_poll_timeout_atomic(ptr, result, (result & mask) == done || result == U32_MAX, - 1, usec); + 1, timeout_us); if (result == U32_MAX) /* card removed */ return -ENODEV;

@@ -163,7 +163,7 @@ int xhci_start(struct xhci_hcd *xhci) * Transactions will be terminated immediately, and operational registers * will be set to their defaults. */ -int xhci_reset(struct xhci_hcd *xhci) +int xhci_reset(struct xhci_hcd *xhci, u64 timeout_us) { u32 command; u32 state; @@ -196,8 +196,7 @@ int xhci_reset(struct xhci_hcd *xhci) if (xhci->quirks & XHCI_INTEL_HOST) udelay(1000);

- ret = xhci_handshake(&xhci->op_regs->command, - CMD_RESET, 0, 10 * 1000 * 1000); + ret = xhci_handshake(&xhci->op_regs->command, CMD_RESET, 0, timeout_us); if (ret) return ret;

@@ -210,8 +209,7 @@ int xhci_reset(struct xhci_hcd *xhci) * xHCI cannot write to any doorbells or operational registers other * than status until the "Controller Not Ready" flag is cleared. */ - ret = xhci_handshake(&xhci->op_regs->status, - STS_CNR, 0, 10 * 1000 * 1000); + ret = xhci_handshake(&xhci->op_regs->status, STS_CNR, 0, timeout_us);

xhci->usb2_rhub.bus_state.port_c_suspend = 0; xhci->usb2_rhub.bus_state.suspended_ports = 0; @@ -732,7 +730,7 @@ static void xhci_stop(struct usb_hcd *hc xhci->xhc_state |= XHCI_STATE_HALTED; xhci->cmd_ring_state = CMD_RING_STATE_STOPPED; xhci_halt(xhci); - xhci_reset(xhci); + xhci_reset(xhci, XHCI_RESET_SHORT_USEC); spin_unlock_irq(&xhci->lock);

xhci_cleanup_msix(xhci); @@ -785,7 +783,7 @@ void xhci_shutdown(struct usb_hcd *hcd) xhci_halt(xhci); /* Workaround for spurious wakeups at shutdown with HSW */ if (xhci->quirks & XHCI_SPURIOUS_WAKEUP) - xhci_reset(xhci); + xhci_reset(xhci, XHCI_RESET_SHORT_USEC); spin_unlock_irq(&xhci->lock);

xhci_cleanup_msix(xhci); @@ -1170,7 +1168,7 @@ int xhci_resume(struct xhci_hcd *xhci, b xhci_dbg(xhci, "Stop HCD\n"); xhci_halt(xhci); xhci_zero_64b_regs(xhci); - retval = xhci_reset(xhci); + retval = xhci_reset(xhci, XHCI_RESET_LONG_USEC); spin_unlock_irq(&xhci->lock); if (retval) return retval; @@ -5272,7 +5270,7 @@ int xhci_gen_setup(struct usb_hcd *hcd,

xhci_dbg(xhci, "Resetting HCD\n"); /* Reset the internal HC memory state and registers. */ - retval = xhci_reset(xhci); + retval = xhci_reset(xhci, XHCI_RESET_LONG_USEC); if (retval) return retval; xhci_dbg(xhci, "Reset complete\n"); --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -229,6 +229,9 @@ struct xhci_op_regs { #define CMD_ETE (1 << 14) /* bits 15:31 are reserved (and should be preserved on writes). */

+#define XHCI_RESET_LONG_USEC (10 * 1000 * 1000) +#define XHCI_RESET_SHORT_USEC (250 * 1000) + /* IMAN - Interrupt Management Register */ #define IMAN_IE (1 << 1) #define IMAN_IP (1 << 0) @@ -2061,11 +2064,11 @@ void xhci_free_container_ctx(struct xhci

/* xHCI host controller glue */ typedef void (*xhci_get_quirks_t)(struct device *, struct xhci_hcd *); -int xhci_handshake(void __iomem *ptr, u32 mask, u32 done, int usec); +int xhci_handshake(void __iomem *ptr, u32 mask, u32 done, u64 timeout_us); void xhci_quiesce(struct xhci_hcd *xhci); int xhci_halt(struct xhci_hcd *xhci); int xhci_start(struct xhci_hcd *xhci); -int xhci_reset(struct xhci_hcd *xhci); +int xhci_reset(struct xhci_hcd *xhci, u64 timeout_us); int xhci_run(struct usb_hcd *hcd); int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks); void xhci_shutdown(struct usb_hcd *hcd);

From: James Clark james.clark@arm.com

commit ea75a342aed5ed72c87f38fbe0df2f5df7eae374 upstream.

It's impossible to program a valid value for TRCCONFIGR.QE when TRCIDR0.QSUPP==0b10. In that case the following is true:

Q element support is implemented, and only supports Q elements without instruction counts. TRCCONFIGR.QE can only take the values 0b00 or 0b11.

Currently the low bit of QSUPP is checked to see if the low bit of QE can be written to, but as you can see when QSUPP==0b10 the low bit is cleared making it impossible to ever write the only valid value of 0b11 to QE. 0b10 would be written instead, which is a reserved QE value even for all values of QSUPP.

The fix is to allow writing the low bit of QE for any non zero value of QSUPP.

This change also ensures that the low bit is always set, even when the user attempts to only set the high bit.

Signed-off-by: James Clark james.clark@arm.com Reviewed-by: Mike Leach mike.leach@linaro.org Fixes: d8c66962084f ("coresight-etm4x: Controls pertaining to the reset, mode, pe and events") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220120113047.2839622-2-james.clark@arm.com Signed-off-by: Mathieu Poirier mathieu.poirier@linaro.org Signed-off-by: Suzuki K Poulose suzuki.poulose@arm.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/hwtracing/coresight/coresight-etm4x-sysfs.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c +++ b/drivers/hwtracing/coresight/coresight-etm4x-sysfs.c @@ -364,8 +364,12 @@ static ssize_t mode_store(struct device mode = ETM_MODE_QELEM(config->mode); /* start by clearing QE bits */ config->cfg &= ~(BIT(13) | BIT(14)); - /* if supported, Q elements with instruction counts are enabled */ - if ((mode & BIT(0)) && (drvdata->q_support & BIT(0))) + /* + * if supported, Q elements with instruction counts are enabled. + * Always set the low bit for any requested mode. Valid combos are + * 0b00, 0b01 and 0b11. + */ + if (mode && drvdata->q_support) config->cfg |= BIT(13); /* * if supported, Q elements with and without instruction

From: Liam Beguin liambeguin@gmail.com

commit 1bca97ff95c732a516ebb68da72814194980e0a5 upstream.

When a consumer calls iio_read_channel_processed() and the channel has an integer scale, the scale channel scale is applied and the processed value is returned as expected.

On the other hand, if the consumer calls iio_convert_raw_to_processed() the scaling factor requested by the consumer is not applied.

This for example causes the consumer to process mV when expecting uV. Make sure to always apply the scaling factor requested by the consumer.

Fixes: 48e44ce0f881 ("iio:inkern: Add function to read the processed value") Signed-off-by: Liam Beguin liambeguin@gmail.com Reviewed-by: Peter Rosin peda@axentia.se Reviewed-by: Andy Shevchenko andy.shevchenko@gmail.com Link: https://lore.kernel.org/r/20220108205319.2046348-2-liambeguin@gmail.com Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/iio/inkern.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/iio/inkern.c +++ b/drivers/iio/inkern.c @@ -609,7 +609,7 @@ static int iio_convert_raw_to_processed_

switch (scale_type) { case IIO_VAL_INT: - *processed = raw64 * scale_val; + *processed = raw64 * scale_val * scale; break; case IIO_VAL_INT_PLUS_MICRO: if (scale_val2 < 0)

From: Liam Beguin liambeguin@gmail.com

commit ca85123354e1a65a22170286387b4791997fe864 upstream.

iio_convert_raw_to_processed_unlocked() assumes the offset is an integer. Make a best effort to get a valid offset value for fractional cases without breaking implicit truncations.

Fixes: 48e44ce0f881 ("iio:inkern: Add function to read the processed value") Signed-off-by: Liam Beguin liambeguin@gmail.com Reviewed-by: Peter Rosin peda@axentia.se Reviewed-by: Andy Shevchenko andy.shevchenko@gmail.com Link: https://lore.kernel.org/r/20220108205319.2046348-4-liambeguin@gmail.com Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/iio/inkern.c | 32 +++++++++++++++++++++++++++----- 1 file changed, 27 insertions(+), 5 deletions(-)

--- a/drivers/iio/inkern.c +++ b/drivers/iio/inkern.c @@ -588,13 +588,35 @@ EXPORT_SYMBOL_GPL(iio_read_channel_avera static int iio_convert_raw_to_processed_unlocked(struct iio_channel *chan, int raw, int *processed, unsigned int scale) { - int scale_type, scale_val, scale_val2, offset; + int scale_type, scale_val, scale_val2; + int offset_type, offset_val, offset_val2; s64 raw64 = raw; - int ret;

- ret = iio_channel_read(chan, &offset, NULL, IIO_CHAN_INFO_OFFSET); - if (ret >= 0) - raw64 += offset; + offset_type = iio_channel_read(chan, &offset_val, &offset_val2, + IIO_CHAN_INFO_OFFSET); + if (offset_type >= 0) { + switch (offset_type) { + case IIO_VAL_INT: + break; + case IIO_VAL_INT_PLUS_MICRO: + case IIO_VAL_INT_PLUS_NANO: + /* + * Both IIO_VAL_INT_PLUS_MICRO and IIO_VAL_INT_PLUS_NANO + * implicitely truncate the offset to it's integer form. + */ + break; + case IIO_VAL_FRACTIONAL: + offset_val /= offset_val2; + break; + case IIO_VAL_FRACTIONAL_LOG2: + offset_val >>= offset_val2; + break; + default: + return -EINVAL; + } + + raw64 += offset_val; + }

scale_type = iio_channel_read(chan, &scale_val, &scale_val2, IIO_CHAN_INFO_SCALE);

From: Kunihiko Hayashi hayashi.kunihiko@socionext.com

commit ca85a66710a8a1f6b0719397225c3e9ee0abb692 upstream.

Fixed-rate clocks in UniPhier don't have any parent clocks, however, initial data "init.flags" isn't initialized, so it might be determined that there is a parent clock for fixed-rate clock.

This sets init.flags to zero as initialization.

Cc: stable@vger.kernel.org Fixes: 734d82f4a678 ("clk: uniphier: add core support code for UniPhier clock driver") Signed-off-by: Kunihiko Hayashi hayashi.kunihiko@socionext.com Link: https://lore.kernel.org/r/1646808918-30899-1-git-send-email-hayashi.kunihiko... Signed-off-by: Stephen Boyd sboyd@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/clk/uniphier/clk-uniphier-fixed-rate.c | 1 + 1 file changed, 1 insertion(+)

--- a/drivers/clk/uniphier/clk-uniphier-fixed-rate.c +++ b/drivers/clk/uniphier/clk-uniphier-fixed-rate.c @@ -24,6 +24,7 @@ struct clk_hw *uniphier_clk_register_fix

init.name = name; init.ops = &clk_fixed_rate_ops; + init.flags = 0; init.parent_names = NULL; init.num_parents = 0;

From: Eric Biggers ebiggers@google.com

commit c51abd96837f600d8fd940b6ab8e2da578575504 upstream.

In many cases, keyctl_pkey_params_get_2() is validating the user buffer lengths against the wrong algorithm properties. Fix it to check against the correct properties.

Probably this wasn't noticed before because for all asymmetric keys of the "public_key" subtype, max_data_size == max_sig_size == max_enc_size == max_dec_size. However, this isn't necessarily true for the "asym_tpm" subtype (it should be, but it's not strictly validated). Of course, future key types could have different values as well.

Fixes: 00d60fd3b932 ("KEYS: Provide keyctls to drive the new key type ops for asymmetric keys [ver #2]") Cc: stable@vger.kernel.org # v4.20+ Signed-off-by: Eric Biggers ebiggers@google.com Reviewed-by: Jarkko Sakkinen jarkko@kernel.org Signed-off-by: Jarkko Sakkinen jarkko@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- security/keys/keyctl_pkey.c | 14 +++++++++++--- 1 file changed, 11 insertions(+), 3 deletions(-)

--- a/security/keys/keyctl_pkey.c +++ b/security/keys/keyctl_pkey.c @@ -135,15 +135,23 @@ static int keyctl_pkey_params_get_2(cons

switch (op) { case KEYCTL_PKEY_ENCRYPT: + if (uparams.in_len > info.max_dec_size || + uparams.out_len > info.max_enc_size) + return -EINVAL; + break; case KEYCTL_PKEY_DECRYPT: if (uparams.in_len > info.max_enc_size || uparams.out_len > info.max_dec_size) return -EINVAL; break; case KEYCTL_PKEY_SIGN: + if (uparams.in_len > info.max_data_size || + uparams.out_len > info.max_sig_size) + return -EINVAL; + break; case KEYCTL_PKEY_VERIFY: - if (uparams.in_len > info.max_sig_size || - uparams.out_len > info.max_data_size) + if (uparams.in_len > info.max_data_size || + uparams.in2_len > info.max_sig_size) return -EINVAL; break; default: @@ -151,7 +159,7 @@ static int keyctl_pkey_params_get_2(cons }

params->in_len = uparams.in_len; - params->out_len = uparams.out_len; + params->out_len = uparams.out_len; /* Note: same as in2_len */ return 0; }

From: Bagas Sanjaya bagasdotme@gmail.com

commit 555d44932c67e617d89bc13c81c7efac5b51fcfa upstream.

The link to stable tree is redirected to https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git. Update accordingly.

Cc: Greg Kroah-Hartman gregkh@linuxfoundation.org Cc: Sasha Levin sashal@kernel.org Cc: Jonathan Corbet corbet@lwn.net Cc: stable@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Bagas Sanjaya bagasdotme@gmail.com Link: https://lore.kernel.org/r/20220314113329.485372-6-bagasdotme@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- Documentation/process/stable-kernel-rules.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/Documentation/process/stable-kernel-rules.rst +++ b/Documentation/process/stable-kernel-rules.rst @@ -174,7 +174,7 @@ Trees - The finalized and tagged releases of all stable kernels can be found in separate branches per version at:

- https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git + https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git

- The release candidate of all stable kernel versions can be found at:

From: NeilBrown neilb@suse.de

commit 3848e96edf4788f772d83990022fa7023a233d83 upstream.

xprt_destory() claims XPRT_LOCKED and then calls del_timer_sync(). Both xprt_unlock_connect() and xprt_release() call ->release_xprt() which drops XPRT_LOCKED and *then* xprt_schedule_autodisconnect() which calls mod_timer().

This may result in mod_timer() being called *after* del_timer_sync(). When this happens, the timer may fire long after the xprt has been freed, and run_timer_softirq() will probably crash.

The pairing of ->release_xprt() and xprt_schedule_autodisconnect() is always called under ->transport_lock. So if we take ->transport_lock to call del_timer_sync(), we can be sure that mod_timer() will run first (if it runs at all).

Cc: stable@vger.kernel.org Signed-off-by: NeilBrown neilb@suse.de Signed-off-by: Trond Myklebust trond.myklebust@hammerspace.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/sunrpc/xprt.c | 7 +++++++ 1 file changed, 7 insertions(+)

--- a/net/sunrpc/xprt.c +++ b/net/sunrpc/xprt.c @@ -2006,7 +2006,14 @@ static void xprt_destroy(struct rpc_xprt */ wait_on_bit_lock(&xprt->state, XPRT_LOCKED, TASK_UNINTERRUPTIBLE);

+ /* + * xprt_schedule_autodisconnect() can run after XPRT_LOCKED + * is cleared. We use ->transport_lock to ensure the mod_timer() + * can only run *before* del_time_sync(), never after. + */ + spin_lock(&xprt->transport_lock); del_timer_sync(&xprt->timer); + spin_unlock(&xprt->transport_lock);

/* * Destroy sockets etc from the system workqueue so they can

From: Dan Carpenter dan.carpenter@oracle.com

commit 23a9dbbe0faf124fc4c139615633b9d12a3a89ef upstream.

On a 32 bit system, the "len * sizeof(*p)" operation can have an integer overflow.

Cc: stable@vger.kernel.org Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Signed-off-by: Chuck Lever chuck.lever@oracle.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- include/linux/sunrpc/xdr.h | 2 ++ 1 file changed, 2 insertions(+)

--- a/include/linux/sunrpc/xdr.h +++ b/include/linux/sunrpc/xdr.h @@ -536,6 +536,8 @@ xdr_stream_decode_uint32_array(struct xd

if (unlikely(xdr_stream_decode_u32(xdr, &len) < 0)) return -EBADMSG; + if (len > SIZE_MAX / sizeof(*p)) + return -EBADMSG; p = xdr_inline_decode(xdr, len * sizeof(*p)); if (unlikely(!p)) return -EBADMSG;

From: Juhyung Park qkrwngud825@gmail.com

commit 680af5b824a52faa819167628665804a14f0e0df upstream.

cnt should be passed to sb_has_quota_active() instead of type to check active quota properly.

Moreover, when the type is -1, the compiler with enough inline knowledge can discard sb_has_quota_active() check altogether, causing a NULL pointer dereference at the following inode_lock(dqopt->files[cnt]):

[ 2.796010] Unable to handle kernel NULL pointer dereference at virtual address 00000000000000a0 [ 2.796024] Mem abort info: [ 2.796025] ESR = 0x96000005 [ 2.796028] EC = 0x25: DABT (current EL), IL = 32 bits [ 2.796029] SET = 0, FnV = 0 [ 2.796031] EA = 0, S1PTW = 0 [ 2.796032] Data abort info: [ 2.796034] ISV = 0, ISS = 0x00000005 [ 2.796035] CM = 0, WnR = 0 [ 2.796046] user pgtable: 4k pages, 39-bit VAs, pgdp=00000003370d1000 [ 2.796048] [00000000000000a0] pgd=0000000000000000, pud=0000000000000000 [ 2.796051] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 2.796056] CPU: 7 PID: 640 Comm: f2fs_ckpt-259:7 Tainted: G S 5.4.179-arter97-r8-64666-g2f16e087f9d8 #1 [ 2.796057] Hardware name: Qualcomm Technologies, Inc. Lahaina MTP lemonadep (DT) [ 2.796059] pstate: 80c00005 (Nzcv daif +PAN +UAO) [ 2.796065] pc : down_write+0x28/0x70 [ 2.796070] lr : f2fs_quota_sync+0x100/0x294 [ 2.796071] sp : ffffffa3f48ffc30 [ 2.796073] x29: ffffffa3f48ffc30 x28: 0000000000000000 [ 2.796075] x27: ffffffa3f6d718b8 x26: ffffffa415fe9d80 [ 2.796077] x25: ffffffa3f7290048 x24: 0000000000000001 [ 2.796078] x23: 0000000000000000 x22: ffffffa3f7290000 [ 2.796080] x21: ffffffa3f72904a0 x20: ffffffa3f7290110 [ 2.796081] x19: ffffffa3f77a9800 x18: ffffffc020aae038 [ 2.796083] x17: ffffffa40e38e040 x16: ffffffa40e38e6d0 [ 2.796085] x15: ffffffa40e38e6cc x14: ffffffa40e38e6d0 [ 2.796086] x13: 00000000000004f6 x12: 00162c44ff493000 [ 2.796088] x11: 0000000000000400 x10: ffffffa40e38c948 [ 2.796090] x9 : 0000000000000000 x8 : 00000000000000a0 [ 2.796091] x7 : 0000000000000000 x6 : 0000d1060f00002a [ 2.796093] x5 : ffffffa3f48ff718 x4 : 000000000000000d [ 2.796094] x3 : 00000000060c0000 x2 : 0000000000000001 [ 2.796096] x1 : 0000000000000000 x0 : 00000000000000a0 [ 2.796098] Call trace: [ 2.796100] down_write+0x28/0x70 [ 2.796102] f2fs_quota_sync+0x100/0x294 [ 2.796104] block_operations+0x120/0x204 [ 2.796106] f2fs_write_checkpoint+0x11c/0x520 [ 2.796107] __checkpoint_and_complete_reqs+0x7c/0xd34 [ 2.796109] issue_checkpoint_thread+0x6c/0xb8 [ 2.796112] kthread+0x138/0x414 [ 2.796114] ret_from_fork+0x10/0x18 [ 2.796117] Code: aa0803e0 aa1f03e1 52800022 aa0103e9 (c8e97d02) [ 2.796120] ---[ end trace 96e942e8eb6a0b53 ]--- [ 2.800116] Kernel panic - not syncing: Fatal exception [ 2.800120] SMP: stopping secondary CPUs

Fixes: 9de71ede81e6 ("f2fs: quota: fix potential deadlock") Cc: stable@vger.kernel.org # v5.15+ Signed-off-by: Juhyung Park qkrwngud825@gmail.com Reviewed-by: Chao Yu chao@kernel.org Signed-off-by: Jaegeuk Kim jaegeuk@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/f2fs/super.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)

--- a/fs/f2fs/super.c +++ b/fs/f2fs/super.c @@ -2066,7 +2066,7 @@ int f2fs_quota_sync(struct super_block * struct f2fs_sb_info *sbi = F2FS_SB(sb); struct quota_info *dqopt = sb_dqopt(sb); int cnt; - int ret; + int ret = 0;

/* * Now when everything is written we can discard the pagecache so @@ -2077,8 +2077,8 @@ int f2fs_quota_sync(struct super_block * if (type != -1 && cnt != type) continue;

- if (!sb_has_quota_active(sb, type)) - return 0; + if (!sb_has_quota_active(sb, cnt)) + continue;

inode_lock(dqopt->files[cnt]);

From: Krzysztof Kozlowski krzysztof.kozlowski@canonical.com

commit 50ebd19e3585b9792e994cfa8cbee8947fe06371 upstream.

The driver iterates over its devicetree children with for_each_child_of_node() and stores for later found node pointer. This has to be put in error paths to avoid leak during re-probing.

Fixes: ab663789d697 ("pinctrl: samsung: Match pin banks with their device nodes") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@canonical.com Reviewed-by: Sam Protsenko semen.protsenko@linaro.org Reviewed-by: Chanho Park chanho61.park@samsung.com Link: https://lore.kernel.org/r/20220111201426.326777-2-krzysztof.kozlowski@canoni... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/pinctrl/samsung/pinctrl-samsung.c | 30 +++++++++++++++++++++++------- 1 file changed, 23 insertions(+), 7 deletions(-)

--- a/drivers/pinctrl/samsung/pinctrl-samsung.c +++ b/drivers/pinctrl/samsung/pinctrl-samsung.c @@ -1002,6 +1002,16 @@ samsung_pinctrl_get_soc_data_for_of_alia return &(of_data->ctrl[id]); }

+static void samsung_banks_of_node_put(struct samsung_pinctrl_drv_data *d) +{ + struct samsung_pin_bank *bank; + unsigned int i; + + bank = d->pin_banks; + for (i = 0; i < d->nr_banks; ++i, ++bank) + of_node_put(bank->of_node); +} + /* retrieve the soc specific data */ static const struct samsung_pin_ctrl * samsung_pinctrl_get_soc_data(struct samsung_pinctrl_drv_data *d, @@ -1116,19 +1126,19 @@ static int samsung_pinctrl_probe(struct if (ctrl->retention_data) { drvdata->retention_ctrl = ctrl->retention_data->init(drvdata, ctrl->retention_data); - if (IS_ERR(drvdata->retention_ctrl)) - return PTR_ERR(drvdata->retention_ctrl); + if (IS_ERR(drvdata->retention_ctrl)) { + ret = PTR_ERR(drvdata->retention_ctrl); + goto err_put_banks; + } }

ret = samsung_pinctrl_register(pdev, drvdata); if (ret) - return ret; + goto err_put_banks;

ret = samsung_gpiolib_register(pdev, drvdata); - if (ret) { - samsung_pinctrl_unregister(pdev, drvdata); - return ret; - } + if (ret) + goto err_unregister;

if (ctrl->eint_gpio_init) ctrl->eint_gpio_init(drvdata); @@ -1138,6 +1148,12 @@ static int samsung_pinctrl_probe(struct platform_set_drvdata(pdev, drvdata);

return 0; + +err_unregister: + samsung_pinctrl_unregister(pdev, drvdata); +err_put_banks: + samsung_banks_of_node_put(drvdata); + return ret; }

/**

From: Hangyu Hua hbh25y@gmail.com

commit c70222752228a62135cee3409dccefd494a24646 upstream.

There is no need to call dev_kfree_skb() when usb_submit_urb() fails beacause can_put_echo_skb() deletes the original skb and can_free_echo_skb() deletes the cloned skb.

Link: https://lore.kernel.org/all/20220228083639.38183-1-hbh25y@gmail.com Fixes: 702171adeed3 ("ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interface") Cc: stable@vger.kernel.org Cc: Sebastian Haas haas@ems-wuensche.com Signed-off-by: Hangyu Hua hbh25y@gmail.com Signed-off-by: Marc Kleine-Budde mkl@pengutronix.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/can/usb/ems_usb.c | 1 - 1 file changed, 1 deletion(-)

--- a/drivers/net/can/usb/ems_usb.c +++ b/drivers/net/can/usb/ems_usb.c @@ -823,7 +823,6 @@ static netdev_tx_t ems_usb_start_xmit(st

usb_unanchor_urb(urb); usb_free_coherent(dev->udev, size, buf, urb->transfer_dma); - dev_kfree_skb(skb);

atomic_dec(&dev->active_tx_urbs);

From: Baokun Li libaokun1@huawei.com

commit d051cef784de4d54835f6b6836d98a8f6935772c upstream.

If jffs2_build_filesystem() in jffs2_do_mount_fs() returns an error, we can observe the following kmemleak report:

-------------------------------------------- unreferenced object 0xffff88811b25a640 (size 64): comm "mount", pid 691, jiffies 4294957728 (age 71.952s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffffa493be24>] kmem_cache_alloc_trace+0x584/0x880 [<ffffffffa5423a06>] jffs2_sum_init+0x86/0x130 [<ffffffffa5400e58>] jffs2_do_mount_fs+0x798/0xac0 [<ffffffffa540acf3>] jffs2_do_fill_super+0x383/0xc30 [<ffffffffa540c00a>] jffs2_fill_super+0x2ea/0x4c0 [...] unreferenced object 0xffff88812c760000 (size 65536): comm "mount", pid 691, jiffies 4294957728 (age 71.952s) hex dump (first 32 bytes): bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ backtrace: [<ffffffffa493a449>] __kmalloc+0x6b9/0x910 [<ffffffffa5423a57>] jffs2_sum_init+0xd7/0x130 [<ffffffffa5400e58>] jffs2_do_mount_fs+0x798/0xac0 [<ffffffffa540acf3>] jffs2_do_fill_super+0x383/0xc30 [<ffffffffa540c00a>] jffs2_fill_super+0x2ea/0x4c0 [...] --------------------------------------------

This is because the resources allocated in jffs2_sum_init() are not released. Call jffs2_sum_exit() to release these resources to solve the problem.

Fixes: e631ddba5887 ("[JFFS2] Add erase block summary support (mount time improvement)") Cc: stable@vger.kernel.org Signed-off-by: Baokun Li libaokun1@huawei.com Signed-off-by: Richard Weinberger richard@nod.at Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/jffs2/build.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/fs/jffs2/build.c +++ b/fs/jffs2/build.c @@ -415,13 +415,15 @@ int jffs2_do_mount_fs(struct jffs2_sb_in jffs2_free_ino_caches(c); jffs2_free_raw_node_refs(c); ret = -EIO; - goto out_free; + goto out_sum_exit; }

jffs2_calc_trigger_levels(c);

return 0;

+ out_sum_exit: + jffs2_sum_exit(c); out_free: kvfree(c->blocks);

From: Alistair Popple apopple@nvidia.com

commit ddbc84f3f595cf1fc8234a191193b5d20ad43938 upstream.

ZONE_MOVABLE uses the remaining memory in each node. Its starting pfn is also aligned to MAX_ORDER_NR_PAGES. It is possible for the remaining memory in a node to be less than MAX_ORDER_NR_PAGES, meaning there is not enough room for ZONE_MOVABLE on that node.

Unfortunately this condition is not checked for. This leads to zone_movable_pfn[] getting set to a pfn greater than the last pfn in a node.

calculate_node_totalpages() then sets zone->present_pages to be greater than zone->spanned_pages which is invalid, as spanned_pages represents the maximum number of pages in a zone assuming no holes.

Subsequently it is possible free_area_init_core() will observe a zone of size zero with present pages. In this case it will skip setting up the zone, including the initialisation of free_lists[].

However populated_zone() checks zone->present_pages to see if a zone has memory available. This is used by iterators such as walk_zones_in_node(). pagetypeinfo_showfree() uses this to walk the free_list of each zone in each node, which are assumed to be initialised due to the zone not being empty.

As free_area_init_core() never initialised the free_lists[] this results in the following kernel crash when trying to read /proc/pagetypeinfo:

BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC NOPTI CPU: 0 PID: 456 Comm: cat Not tainted 5.16.0 #461 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-2 04/01/2014 RIP: 0010:pagetypeinfo_show+0x163/0x460 Code: 9e 82 e8 80 57 0e 00 49 8b 06 b9 01 00 00 00 4c 39 f0 75 16 e9 65 02 00 00 48 83 c1 01 48 81 f9 a0 86 01 00 0f 84 48 02 00 00 <48> 8b 00 4c 39 f0 75 e7 48 c7 c2 80 a2 e2 82 48 c7 c6 79 ef e3 82 RSP: 0018:ffffc90001c4bd10 EFLAGS: 00010003 RAX: 0000000000000000 RBX: ffff88801105f638 RCX: 0000000000000001 RDX: 0000000000000001 RSI: 000000000000068b RDI: ffff8880163dc68b RBP: ffffc90001c4bd90 R08: 0000000000000001 R09: ffff8880163dc67e R10: 656c6261766f6d6e R11: 6c6261766f6d6e55 R12: ffff88807ffb4a00 R13: ffff88807ffb49f8 R14: ffff88807ffb4580 R15: ffff88807ffb3000 FS: 00007f9c83eff5c0(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000013c8e000 CR4: 0000000000350ef0 Call Trace: seq_read_iter+0x128/0x460 proc_reg_read_iter+0x51/0x80 new_sync_read+0x113/0x1a0 vfs_read+0x136/0x1d0 ksys_read+0x70/0xf0 __x64_sys_read+0x1a/0x20 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae

Fix this by checking that the aligned zone_movable_pfn[] does not exceed the end of the node, and if it does skip creating a movable zone on this node.

Link: https://lkml.kernel.org/r/20220215025831.2113067-1-apopple@nvidia.com Fixes: 2a1e274acf0b ("Create the ZONE_MOVABLE zone") Signed-off-by: Alistair Popple apopple@nvidia.com Acked-by: David Hildenbrand david@redhat.com Acked-by: Mel Gorman mgorman@techsingularity.net Cc: John Hubbard jhubbard@nvidia.com Cc: Zi Yan ziy@nvidia.com Cc: Anshuman Khandual anshuman.khandual@arm.com Cc: Oscar Salvador osalvador@suse.de Cc: stable@vger.kernel.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- mm/page_alloc.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -7326,10 +7326,17 @@ restart:

out2: /* Align start of ZONE_MOVABLE on all nids to MAX_ORDER_NR_PAGES */ - for (nid = 0; nid < MAX_NUMNODES; nid++) + for (nid = 0; nid < MAX_NUMNODES; nid++) { + unsigned long start_pfn, end_pfn; + zone_movable_pfn[nid] = roundup(zone_movable_pfn[nid], MAX_ORDER_NR_PAGES);

+ get_pfn_range_for_nid(nid, &start_pfn, &end_pfn); + if (zone_movable_pfn[nid] >= end_pfn) + zone_movable_pfn[nid] = 0; + } + out: /* restore the node_state */ node_states[N_MEMORY] = saved_node_state;

From: Hugh Dickins hughd@google.com

commit 4e0906008cdb56381638aa17d9c32734eae6d37a upstream.

v2.6.34 commit 9d8cebd4bcd7 ("mm: fix mbind vma merge problem") introduced vma_merge() to mbind_range(); but unlike madvise, mlock and mprotect, it put a "continue" to next vma where its precedents go to update flags on current vma before advancing: that left vma with the wrong setting in the infamous vma_merge() case 8.

v3.10 commit 1444f92c8498 ("mm: merging memory blocks resets mempolicy") tried to fix that in vma_adjust(), without fully understanding the issue.

v3.11 commit 3964acd0dbec ("mm: mempolicy: fix mbind_range() && vma_adjust() interaction") reverted that, and went about the fix in the right way, but chose to optimize out an unnecessary mpol_dup() with a prior mpol_equal() test. But on tmpfs, that also pessimized out the vital call to its ->set_policy(), leaving the new mbind unenforced.

The user visible effect was that the pages got allocated on the local node (happened to be 0), after the mbind() caller had specifically asked for them to be allocated on node 1. There was not any page migration involved in the case reported: the pages simply got allocated on the wrong node.

Just delete that optimization now (though it could be made conditional on vma not having a set_policy). Also remove the "next" variable: it turned out to be blameless, but also pointless.

Link: https://lkml.kernel.org/r/319e4db9-64ae-4bca-92f0-ade85d342ff@google.com Fixes: 3964acd0dbec ("mm: mempolicy: fix mbind_range() && vma_adjust() interaction") Signed-off-by: Hugh Dickins hughd@google.com Acked-by: Oleg Nesterov oleg@redhat.com Reviewed-by: Liam R. Howlett Liam.Howlett@oracle.com Cc: Vlastimil Babka vbabka@suse.cz Cc: stable@vger.kernel.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- mm/mempolicy.c | 8 +------- 1 file changed, 1 insertion(+), 7 deletions(-)

--- a/mm/mempolicy.c +++ b/mm/mempolicy.c @@ -731,7 +731,6 @@ static int vma_replace_policy(struct vm_ static int mbind_range(struct mm_struct *mm, unsigned long start, unsigned long end, struct mempolicy *new_pol) { - struct vm_area_struct *next; struct vm_area_struct *prev; struct vm_area_struct *vma; int err = 0; @@ -747,8 +746,7 @@ static int mbind_range(struct mm_struct if (start > vma->vm_start) prev = vma;

- for (; vma && vma->vm_start < end; prev = vma, vma = next) { - next = vma->vm_next; + for (; vma && vma->vm_start < end; prev = vma, vma = vma->vm_next) { vmstart = max(start, vma->vm_start); vmend = min(end, vma->vm_end);

@@ -762,10 +760,6 @@ static int mbind_range(struct mm_struct new_pol, vma->vm_userfaultfd_ctx); if (prev) { vma = prev; - next = vma->vm_next; - if (mpol_equal(vma_policy(vma), new_pol)) - continue; - /* vma_merge() joined vma && vma->next, case 8 */ goto replace; } if (vma->vm_start != vmstart) {

From: Manish Chopra manishc@marvell.com

commit 4e6e6bec7440b9b76f312f28b1f4e944eebb3abc upstream.

Driver does support SR-IOV VFs trust configuration but it does not display it when queried via ip link utility.

Cc: stable@vger.kernel.org Fixes: f990c82c385b ("qed*: Add support for ndo_set_vf_trust") Signed-off-by: Manish Chopra manishc@marvell.com Signed-off-by: Ariel Elior aelior@marvell.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/qlogic/qed/qed_sriov.c | 1 + 1 file changed, 1 insertion(+)

--- a/drivers/net/ethernet/qlogic/qed/qed_sriov.c +++ b/drivers/net/ethernet/qlogic/qed/qed_sriov.c @@ -4717,6 +4717,7 @@ static int qed_get_vf_config(struct qed_ tx_rate = vf_info->tx_rate; ivi->max_tx_rate = tx_rate ? tx_rate : link.speed; ivi->min_tx_rate = qed_iov_get_vf_min_rate(hwfn, vf_id); + ivi->trusted = vf_info->is_trusted_request;

return 0; }

From: Nikita Shubin n.shubin@yadro.com

commit 2b2b574ac587ec5bd7716a356492a85ab8b0ce9f upstream.

perf_callchain_store return 0 on success, -1 otherwise, fix fill_callchain to return correct bool value.

Fixes: dbeb90b0c1eb ("riscv: Add perf callchain support") Signed-off-by: Nikita Shubin n.shubin@yadro.com Cc: stable@vger.kernel.org Signed-off-by: Palmer Dabbelt palmer@rivosinc.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/riscv/kernel/perf_callchain.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/riscv/kernel/perf_callchain.c +++ b/arch/riscv/kernel/perf_callchain.c @@ -77,7 +77,7 @@ void perf_callchain_user(struct perf_cal

bool fill_callchain(unsigned long pc, void *entry) { - return perf_callchain_store(entry, pc); + return perf_callchain_store(entry, pc) == 0; }

void notrace walk_stackframe(struct task_struct *task,

From: Xiaomeng Tong xiam0nd.tong@gmail.com

commit 0112f822f8a6d8039c94e0bc9b264d7ffc5d4704 upstream.

The bug is here: err = snd_card_cs423x_pnp(dev, card->private_data, pdev, cdev);

The list iterator value 'cdev' will *always* be set and non-NULL by list_for_each_entry(), so it is incorrect to assume that the iterator value will be NULL if the list is empty or no element is found.

To fix the bug, use a new variable 'iter' as the list iterator, while use the original variable 'cdev' as a dedicated pointer to point to the found element. And snd_card_cs423x_pnp() itself has NULL check for cdev.

Cc: stable@vger.kernel.org Fixes: c2b73d1458014 ("ALSA: cs4236: cs4232 and cs4236 driver merge to solve PnP BIOS detection") Signed-off-by: Xiaomeng Tong xiam0nd.tong@gmail.com Link: https://lore.kernel.org/r/20220327060822.4735-1-xiam0nd.tong@gmail.com Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/isa/cs423x/cs4236.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)

--- a/sound/isa/cs423x/cs4236.c +++ b/sound/isa/cs423x/cs4236.c @@ -544,7 +544,7 @@ static int snd_cs423x_pnpbios_detect(str static int dev; int err; struct snd_card *card; - struct pnp_dev *cdev; + struct pnp_dev *cdev, *iter; char cid[PNP_ID_LEN];

if (pnp_device_is_isapnp(pdev)) @@ -560,9 +560,11 @@ static int snd_cs423x_pnpbios_detect(str strcpy(cid, pdev->id[0].id); cid[5] = '1'; cdev = NULL; - list_for_each_entry(cdev, &(pdev->protocol->devices), protocol_list) { - if (!strcmp(cdev->id[0].id, cid)) + list_for_each_entry(iter, &(pdev->protocol->devices), protocol_list) { + if (!strcmp(iter->id[0].id, cid)) { + cdev = iter; break; + } } err = snd_cs423x_card_new(&pdev->dev, dev, &card); if (err < 0)

From: Rik van Riel riel@surriel.com

commit 3149c79f3cb0e2e3bafb7cfadacec090cbd250d3 upstream.

In some cases it appears the invalidation of a hwpoisoned page fails because the page is still mapped in another process. This can cause a program to be continuously restarted and die when it page faults on the page that was not invalidated. Avoid that problem by unmapping the hwpoisoned page when we find it.

Another issue is that sometimes we end up oopsing in finish_fault, if the code tries to do something with the now-NULL vmf->page. I did not hit this error when submitting the previous patch because there are several opportunities for alloc_set_pte to bail out before accessing vmf->page, and that apparently happened on those systems, and most of the time on other systems, too.

However, across several million systems that error does occur a handful of times a day. It can be avoided by returning VM_FAULT_NOPAGE which will cause do_read_fault to return before calling finish_fault.

Link: https://lkml.kernel.org/r/20220325161428.5068d97e@imladris.surriel.com Fixes: e53ac7374e64 ("mm: invalidate hwpoison page cache page in fault path") Signed-off-by: Rik van Riel riel@surriel.com Reviewed-by: Miaohe Lin linmiaohe@huawei.com Tested-by: Naoya Horiguchi naoya.horiguchi@nec.com Reviewed-by: Oscar Salvador osalvador@suse.de Cc: Mel Gorman mgorman@suse.de Cc: Johannes Weiner hannes@cmpxchg.org Cc: stable@vger.kernel.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- mm/memory.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-)

--- a/mm/memory.c +++ b/mm/memory.c @@ -3245,14 +3245,18 @@ static vm_fault_t __do_fault(struct vm_f return ret;

if (unlikely(PageHWPoison(vmf->page))) { + struct page *page = vmf->page; vm_fault_t poisonret = VM_FAULT_HWPOISON; if (ret & VM_FAULT_LOCKED) { + if (page_mapped(page)) + unmap_mapping_pages(page_mapping(page), + page->index, 1, false); /* Retry if a clean page was removed from the cache. */ - if (invalidate_inode_page(vmf->page)) - poisonret = 0; - unlock_page(vmf->page); + if (invalidate_inode_page(page)) + poisonret = VM_FAULT_NOPAGE; + unlock_page(page); } - put_page(vmf->page); + put_page(page); vmf->page = NULL; return poisonret; }

From: Lars Ellenberg lars.ellenberg@linbit.com

commit f4329d1f848ac35757d9cc5487669d19dfc5979c upstream.

Scenario: ---------

bio chain generated by blk_queue_split(). Some split bio fails and propagates its error status to the "parent" bio. But then the (last part of the) parent bio itself completes without error.

We would clobber the already recorded error status with BLK_STS_OK, causing silent data corruption.

Reproducer: -----------

How to trigger this in the real world within seconds:

DRBD on top of degraded parity raid, small stripe_cache_size, large read_ahead setting. Drop page cache (sysctl vm.drop_caches=1, fadvise "DONTNEED", umount and mount again, "reboot").

Cause significant read ahead.

Large read ahead request is split by blk_queue_split(). Parts of the read ahead that are already in the stripe cache, or find an available stripe cache to use, can be serviced. Parts of the read ahead that would need "too much work", would need to wait for a "stripe_head" to become available, are rejected immediately.

For larger read ahead requests that are split in many pieces, it is very likely that some "splits" will be serviced, but then the stripe cache is exhausted/busy, and the remaining ones will be rejected.

Signed-off-by: Lars Ellenberg lars.ellenberg@linbit.com Signed-off-by: Christoph Böhmwalder christoph.boehmwalder@linbit.com Cc: stable@vger.kernel.org # 4.13.x Link: https://lore.kernel.org/r/20220330185551.3553196-1-christoph.boehmwalder@lin... Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/block/drbd/drbd_req.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/block/drbd/drbd_req.c +++ b/drivers/block/drbd/drbd_req.c @@ -195,7 +195,8 @@ void start_new_tl_epoch(struct drbd_conn void complete_master_bio(struct drbd_device *device, struct bio_and_error *m) { - m->bio->bi_status = errno_to_blk_status(m->error); + if (unlikely(m->error)) + m->bio->bi_status = errno_to_blk_status(m->error); bio_endio(m->bio); dec_ap_bio(device); }

From: Xin Long lucien.xin@gmail.com

commit a4a600dd301ccde6ea239804ec1f19364a39d643 upstream.

When enabling encap for a ipv6 socket without udp_encap_needed_key increased, UDP GRO won't work for v4 mapped v6 address packets as sk will be NULL in udp4_gro_receive().

This patch is to enable it by increasing udp_encap_needed_key for v6 sockets in udp_tunnel_encap_enable(), and correspondingly decrease udp_encap_needed_key in udpv6_destroy_sock().

v1->v2: - add udp_encap_disable() and export it. v2->v3: - add the change for rxrpc and bareudp into one patch, as Alex suggested. v3->v4: - move rxrpc part to another patch.

Acked-by: Willem de Bruijn willemb@google.com Signed-off-by: Xin Long lucien.xin@gmail.com Signed-off-by: Jakub Kicinski kuba@kernel.org Tested-by: Antonio Quartulli antonio@openvpn.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- include/net/udp.h | 1 + include/net/udp_tunnel.h | 3 +-- net/ipv4/udp.c | 6 ++++++ net/ipv6/udp.c | 4 +++- 4 files changed, 11 insertions(+), 3 deletions(-)

--- a/include/net/udp.h +++ b/include/net/udp.h @@ -459,6 +459,7 @@ void udp_init(void);

DECLARE_STATIC_KEY_FALSE(udp_encap_needed_key); void udp_encap_enable(void); +void udp_encap_disable(void); #if IS_ENABLED(CONFIG_IPV6) DECLARE_STATIC_KEY_FALSE(udpv6_encap_needed_key); void udpv6_encap_enable(void); --- a/include/net/udp_tunnel.h +++ b/include/net/udp_tunnel.h @@ -178,9 +178,8 @@ static inline void udp_tunnel_encap_enab #if IS_ENABLED(CONFIG_IPV6) if (sock->sk->sk_family == PF_INET6) ipv6_stub->udpv6_encap_enable(); - else #endif - udp_encap_enable(); + udp_encap_enable(); }

#endif --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -544,6 +544,12 @@ void udp_encap_enable(void) } EXPORT_SYMBOL(udp_encap_enable);

+void udp_encap_disable(void) +{ + static_branch_dec(&udp_encap_needed_key); +} +EXPORT_SYMBOL(udp_encap_disable); + /* Handler for tunnels with arbitrary destination ports: no socket lookup, go * through error handlers in encapsulations looking for a match. */ --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -1553,8 +1553,10 @@ void udpv6_destroy_sock(struct sock *sk) if (encap_destroy) encap_destroy(sk); } - if (up->encap_enabled) + if (up->encap_enabled) { static_branch_dec(&udpv6_encap_needed_key); + udp_encap_disable(); + } }

inet6_destroy_sock(sk);

From: Duoming Zhou duoming@zju.edu.cn

commit efe4186e6a1b54bf38b9e05450d43b0da1fd7739 upstream.

When a 6pack device is detaching, the sixpack_close() will act to cleanup necessary resources. Although del_timer_sync() in sixpack_close() won't return if there is an active timer, one could use mod_timer() in sp_xmit_on_air() to wake up timer again by calling userspace syscall such as ax25_sendmsg(), ax25_connect() and ax25_ioctl().

This unexpected waked handler, sp_xmit_on_air(), realizes nothing about the undergoing cleanup and may still call pty_write() to use driver layer resources that have already been released.

One of the possible race conditions is shown below:

(USE) | (FREE) ax25_sendmsg() | ax25_queue_xmit() | ... | sp_xmit() | sp_encaps() | sixpack_close() sp_xmit_on_air() | del_timer_sync(&sp->tx_t) mod_timer(&sp->tx_t,...) | ... | unregister_netdev() | ... (wait a while) | tty_release() | tty_release_struct() | release_tty() sp_xmit_on_air() | tty_kref_put(tty_struct) //FREE pty_write(tty_struct) //USE | ...

The corresponding fail log is shown below: =============================================================== BUG: KASAN: use-after-free in __run_timers.part.0+0x170/0x470 Write of size 8 at addr ffff88800a652ab8 by task swapper/2/0 ... Call Trace: ... queue_work_on+0x3f/0x50 pty_write+0xcd/0xe0pty_write+0xcd/0xe0 sp_xmit_on_air+0xb2/0x1f0 call_timer_fn+0x28/0x150 __run_timers.part.0+0x3c2/0x470 run_timer_softirq+0x3b/0x80 __do_softirq+0xf1/0x380 ...

This patch reorders the del_timer_sync() after the unregister_netdev() to avoid UAF bugs. Because the unregister_netdev() is well synchronized, it flushs out any pending queues, waits the refcount of net_device decreases to zero and removes net_device from kernel. There is not any running routines after executing unregister_netdev(). Therefore, we could not arouse timer from userspace again.

Signed-off-by: Duoming Zhou duoming@zju.edu.cn Reviewed-by: Lin Ma linma@zju.edu.cn Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/hamradio/6pack.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/net/hamradio/6pack.c +++ b/drivers/net/hamradio/6pack.c @@ -674,14 +674,14 @@ static void sixpack_close(struct tty_str */ netif_stop_queue(sp->dev);

+ unregister_netdev(sp->dev); + del_timer_sync(&sp->tx_t); del_timer_sync(&sp->resync_t);

/* Free all 6pack frame buffers. */ kfree(sp->rbuff); kfree(sp->xbuff); - - unregister_netdev(sp->dev); }

/* Perform I/O control on an active 6pack channel. */

From: Tejun Heo tj@kernel.org

commit 6b2b04590b51aa4cf395fcd185ce439cab5961dc upstream.

blk-iocost and iolatency are cgroup aware rq-qos policies but they didn't disable merges across different cgroups. This obviously can lead to accounting and control errors but more importantly to priority inversions - e.g. an IO which belongs to a higher priority cgroup or IO class may end up getting throttled incorrectly because it gets merged to an IO issued from a low priority cgroup.

Fix it by adding blk_cgroup_mergeable() which is called from merge paths and rejects cross-cgroup and cross-issue_as_root merges.

Signed-off-by: Tejun Heo tj@kernel.org Fixes: d70675121546 ("block: introduce blk-iolatency io controller") Cc: stable@vger.kernel.org # v4.19+ Cc: Josef Bacik jbacik@fb.com Link: https://lore.kernel.org/r/Yi/eE/6zFNyWJ+qd@slm.duckdns.org Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- block/blk-merge.c | 11 +++++++++++ include/linux/blk-cgroup.h | 17 +++++++++++++++++ 2 files changed, 28 insertions(+)

--- a/block/blk-merge.c +++ b/block/blk-merge.c @@ -7,6 +7,7 @@ #include <linux/bio.h> #include <linux/blkdev.h> #include <linux/scatterlist.h> +#include <linux/blk-cgroup.h>

#include <trace/events/block.h>

@@ -571,6 +572,9 @@ static inline unsigned int blk_rq_get_ma static inline int ll_new_hw_segment(struct request *req, struct bio *bio, unsigned int nr_phys_segs) { + if (!blk_cgroup_mergeable(req, bio)) + goto no_merge; + if (blk_integrity_merge_bio(req->q, req, bio) == false) goto no_merge;

@@ -662,6 +666,9 @@ static int ll_merge_requests_fn(struct r if (total_phys_segments > blk_rq_get_max_segments(req)) return 0;

+ if (!blk_cgroup_mergeable(req, next->bio)) + return 0; + if (blk_integrity_merge_rq(q, req, next) == false) return 0;

@@ -885,6 +892,10 @@ bool blk_rq_merge_ok(struct request *rq, if (rq->rq_disk != bio->bi_disk) return false;

+ /* don't merge across cgroup boundaries */ + if (!blk_cgroup_mergeable(rq, bio)) + return false; + /* only merge integrity protected bio into ditto rq */ if (blk_integrity_merge_bio(rq->q, rq, bio) == false) return false; --- a/include/linux/blk-cgroup.h +++ b/include/linux/blk-cgroup.h @@ -22,6 +22,7 @@ #include <linux/atomic.h> #include <linux/kthread.h> #include <linux/fs.h> +#include <linux/blkdev.h>

/* percpu_counter batch for blkg_[rw]stats, per-cpu drift doesn't matter */ #define BLKG_STAT_CPU_BATCH (INT_MAX / 2) @@ -768,6 +769,21 @@ static inline void blkcg_use_delay(struc atomic_inc(&blkg->blkcg->css.cgroup->congestion_count); }

+/** + * blk_cgroup_mergeable - Determine whether to allow or disallow merges + * @rq: request to merge into + * @bio: bio to merge + * + * @bio and @rq should belong to the same cgroup and their issue_as_root should + * match. The latter is necessary as we don't want to throttle e.g. a metadata + * update because it happens to be next to a regular IO. + */ +static inline bool blk_cgroup_mergeable(struct request *rq, struct bio *bio) +{ + return rq->bio->bi_blkg == bio->bi_blkg && + bio_issue_as_root_blkg(rq->bio) == bio_issue_as_root_blkg(bio); +} + static inline int blkcg_unuse_delay(struct blkcg_gq *blkg) { int old = atomic_read(&blkg->use_delay); @@ -868,6 +884,7 @@ static inline bool blkcg_punt_bio_submit static inline void blkcg_bio_issue_init(struct bio *bio) { } static inline bool blkcg_bio_issue_check(struct request_queue *q, struct bio *bio) { return true; } +static inline bool blk_cgroup_mergeable(struct request *rq, struct bio *bio) { return true; }

#define blk_queue_for_each_rl(rl, q) \ for ((rl) = &(q)->root_rl; (rl); (rl) = NULL)

From: Helge Deller deller@gmx.de

commit bd771cf5c4254511cc4abb88f3dab3bd58bdf8e8 upstream.

Zheyu Ma reported this crash in the sm712fb driver when reading three bytes from the framebuffer:

BUG: unable to handle page fault for address: ffffc90001ffffff RIP: 0010:smtcfb_read+0x230/0x3e0 Call Trace: vfs_read+0x198/0xa00 ? do_sys_openat2+0x27d/0x350 ? __fget_light+0x54/0x340 ksys_read+0xce/0x190 do_syscall_64+0x43/0x90

Fix it by removing the open-coded endianess fixup-code and by moving the pointer post decrement out the fb_readl() function.

Reported-by: Zheyu Ma zheyuma97@gmail.com Signed-off-by: Helge Deller deller@gmx.de Tested-by: Zheyu Ma zheyuma97@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/video/fbdev/sm712fb.c | 25 +++++++------------------ 1 file changed, 7 insertions(+), 18 deletions(-)

--- a/drivers/video/fbdev/sm712fb.c +++ b/drivers/video/fbdev/sm712fb.c @@ -1047,7 +1047,7 @@ static ssize_t smtcfb_read(struct fb_inf if (count + p > total_size) count = total_size - p;

- buffer = kmalloc((count > PAGE_SIZE) ? PAGE_SIZE : count, GFP_KERNEL); + buffer = kmalloc(PAGE_SIZE, GFP_KERNEL); if (!buffer) return -ENOMEM;

@@ -1059,25 +1059,14 @@ static ssize_t smtcfb_read(struct fb_inf while (count) { c = (count > PAGE_SIZE) ? PAGE_SIZE : count; dst = buffer; - for (i = c >> 2; i--;) { - *dst = fb_readl(src++); - *dst = big_swap(*dst); + for (i = (c + 3) >> 2; i--;) { + u32 val; + + val = fb_readl(src); + *dst = big_swap(val); + src++; dst++; } - if (c & 3) { - u8 *dst8 = (u8 *)dst; - u8 __iomem *src8 = (u8 __iomem *)src; - - for (i = c & 3; i--;) { - if (i & 1) { - *dst8++ = fb_readb(++src8); - } else { - *dst8++ = fb_readb(--src8); - src8 += 2; - } - } - src = (u32 __iomem *)src8; - }

if (copy_to_user(buf, buffer, c)) { err = -EFAULT;

From: Tudor Ambarus tudor.ambarus@microchip.com

commit 0fb578a529ac7aca326a9fa475b4a6f58a756fda upstream.

PMERRLOC resource size was set to 0x100, which resulted in HSMC_ERRLOCx register being truncated to offset x = 21, causing error correction to fail if more than 22 bit errors and if 24 or 32 bit error correction was supported.

Fixes: d9c41bf30cf8 ("ARM: dts: at91: Declare EBI/NAND controllers") Signed-off-by: Tudor Ambarus tudor.ambarus@microchip.com Cc: stable@vger.kernel.org # 4.13.x Acked-by: Alexander Dahl ada@thorsis.com Signed-off-by: Nicolas Ferre nicolas.ferre@microchip.com Link: https://lore.kernel.org/r/20220111132301.906712-1-tudor.ambarus@microchip.co... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/arm/boot/dts/sama5d2.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -526,7 +526,7 @@ pmecc: ecc-engine@f8014070 { compatible = "atmel,sama5d2-pmecc"; reg = <0xf8014070 0x490>, - <0xf8014500 0x100>; + <0xf8014500 0x200>; }; };

From: Krzysztof Kozlowski krzysztof.kozlowski@canonical.com

commit 60a9914cb2061ba612a3f14f6ad329912b486360 upstream.

Add required VDD supplies to HDMI block on SMDK5250. Without them, the HDMI driver won't probe. Because of lack of schematics, use same supplies as on Arndale 5250 board (voltage matches).

Cc: stable@vger.kernel.org # v3.15+ Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@canonical.com Reviewed-by: Alim Akhtar alim.akhtar@samsung.com Link: https://lore.kernel.org/r/20220208171823.226211-2-krzysztof.kozlowski@canoni... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/arm/boot/dts/exynos5250-smdk5250.dts | 3 +++ 1 file changed, 3 insertions(+)

--- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -117,6 +117,9 @@ status = "okay"; ddc = <&i2c_2>; hpd-gpios = <&gpx3 7 GPIO_ACTIVE_HIGH>; + vdd-supply = <&ldo8_reg>; + vdd_osc-supply = <&ldo10_reg>; + vdd_pll-supply = <&ldo8_reg>; };

&i2c_0 {

From: Colin Ian King colin.i.king@gmail.com

commit 02a95374b5eebdbd3b6413fd7ddec151d2ea75a1 upstream.

Currently tx_params is being re-assigned with a new value and the previous setting IEEE80211_HT_MCS_TX_RX_DIFF is being overwritten. The assignment operator is incorrect, the original intent was to bit-wise or the value in. Fix this by replacing the = operator with |= instead.

Kudos to Christian Lamparter for suggesting the correct fix.

Fixes: fe8ee9ad80b2 ("carl9170: mac80211 glue and command interface") Signed-off-by: Colin Ian King colin.i.king@gmail.com Cc: Stable@vger.kernel.org Acked-by: Christian Lamparter chunkeey@gmail.com Signed-off-by: Kalle Valo quic_kvalo@quicinc.com Link: https://lore.kernel.org/r/20220125004406.344422-1-colin.i.king@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/wireless/ath/carl9170/main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/wireless/ath/carl9170/main.c +++ b/drivers/net/wireless/ath/carl9170/main.c @@ -1917,7 +1917,7 @@ static int carl9170_parse_eeprom(struct WARN_ON(!(tx_streams >= 1 && tx_streams <= IEEE80211_HT_MCS_TX_MAX_STREAMS));

- tx_params = (tx_streams - 1) << + tx_params |= (tx_streams - 1) << IEEE80211_HT_MCS_TX_MAX_STREAMS_SHIFT;

carl9170_band_2GHz.ht_cap.mcs.tx_params |= tx_params;

From: Dirk Müller dmueller@suse.de

commit a5359ddd052860bacf957e65fe819c63e974b3a6 upstream.

GCC 10+ defaults to -fno-common, which enforces proper declaration of external references using "extern". without this change a link would fail with:

lib/raid6/test/algos.c:28: multiple definition of `raid6_call'; lib/raid6/test/test.c:22: first defined here

the pq.h header that is included already includes an extern declaration so we can just remove the redundant one here.

Cc: stable@vger.kernel.org Signed-off-by: Dirk Müller dmueller@suse.de Reviewed-by: Paul Menzel pmenzel@molgen.mpg.de Signed-off-by: Song Liu song@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- lib/raid6/test/test.c | 1 - 1 file changed, 1 deletion(-)

--- a/lib/raid6/test/test.c +++ b/lib/raid6/test/test.c @@ -19,7 +19,6 @@ #define NDISKS 16 /* Including P and Q */

const char raid6_empty_zero_page[PAGE_SIZE] __attribute__((aligned(PAGE_SIZE))); -struct raid6_calls raid6_call;

char *dataptrs[NDISKS]; char data[NDISKS][PAGE_SIZE] __attribute__((aligned(PAGE_SIZE)));

From: Eric Biggers ebiggers@google.com

commit d3481accd974541e6a5d6a1fb588924a3519c36e upstream.

RSA PKCS#1 v1.5 signatures are required to be the same length as the RSA key size. RFC8017 specifically requires the verifier to check this (https://datatracker.ietf.org/doc/html/rfc8017#section-8.2.2).

Commit a49de377e051 ("crypto: Add hash param to pkcs1pad") changed the kernel to allow longer signatures, but didn't explain this part of the change; it seems to be unrelated to the rest of the commit.

Revert this change, since it doesn't appear to be correct.

We can be pretty sure that no one is relying on overly-long signatures (which would have to be front-padded with zeroes) being supported, given that they would have been broken since commit c7381b012872 ("crypto: akcipher - new verify API for public key algorithms").

Fixes: a49de377e051 ("crypto: Add hash param to pkcs1pad") Cc: stable@vger.kernel.org # v4.6+ Cc: Tadeusz Struk tadeusz.struk@linaro.org Suggested-by: Vitaly Chikunov vt@altlinux.org Signed-off-by: Eric Biggers ebiggers@google.com Signed-off-by: Herbert Xu herbert@gondor.apana.org.au Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- crypto/rsa-pkcs1pad.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/crypto/rsa-pkcs1pad.c +++ b/crypto/rsa-pkcs1pad.c @@ -537,7 +537,7 @@ static int pkcs1pad_verify(struct akciph

if (WARN_ON(req->dst) || WARN_ON(!req->dst_len) || - !ctx->key_size || req->src_len < ctx->key_size) + !ctx->key_size || req->src_len != ctx->key_size) return -EINVAL;

req_ctx->out_buf = kmalloc(ctx->key_size + req->dst_len, GFP_KERNEL);

From: Maciej W. Rozycki macro@orcam.me.uk

commit 244eae91a94c6dab82b3232967d10eeb9dfa21c6 upstream.

Recent tightening of the opcode table in binutils so as to consistently disallow the assembly or disassembly of CP0 instructions not supported by the processor architecture chosen has caused a regression like below:

arch/mips/dec/prom/locore.S: Assembler messages: arch/mips/dec/prom/locore.S:29: Error: opcode not supported on this processor: r4600 (mips3) `rfe'

in a piece of code used to probe for memory with PMAX DECstation models, which have non-REX firmware. Those computers always have an R2000 CPU and consequently the exception handler used in memory probing uses the RFE instruction, which those processors use.

While adding 64-bit support this code was correctly excluded for 64-bit configurations, however it should have also been excluded for irrelevant 32-bit configurations. Do this now then, and only enable PMAX memory probing for R3k systems.

Reported-by: Jan-Benedict Glaw jbglaw@lug-owl.de Reported-by: Sudip Mukherjee sudipm.mukherjee@gmail.com Signed-off-by: Maciej W. Rozycki macro@orcam.me.uk Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org # v2.6.12+ Signed-off-by: Thomas Bogendoerfer tsbogend@alpha.franken.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/mips/dec/prom/Makefile | 2 +- arch/mips/include/asm/dec/prom.h | 15 +++++---------- 2 files changed, 6 insertions(+), 11 deletions(-)

--- a/arch/mips/dec/prom/Makefile +++ b/arch/mips/dec/prom/Makefile @@ -6,4 +6,4 @@

lib-y += init.o memory.o cmdline.o identify.o console.o

-lib-$(CONFIG_32BIT) += locore.o +lib-$(CONFIG_CPU_R3000) += locore.o --- a/arch/mips/include/asm/dec/prom.h +++ b/arch/mips/include/asm/dec/prom.h @@ -43,16 +43,11 @@ */ #define REX_PROM_MAGIC 0x30464354

-#ifdef CONFIG_64BIT - -#define prom_is_rex(magic) 1 /* KN04 and KN05 are REX PROMs. */ - -#else /* !CONFIG_64BIT */ - -#define prom_is_rex(magic) ((magic) == REX_PROM_MAGIC) - -#endif /* !CONFIG_64BIT */ - +/* KN04 and KN05 are REX PROMs, so only do the check for R3k systems. */ +static inline bool prom_is_rex(u32 magic) +{ + return !IS_ENABLED(CONFIG_CPU_R3000) || magic == REX_PROM_MAGIC; +}

/* * 3MIN/MAXINE PROM entry points for DS5000/1xx's, DS5000/xx's and

From: Max Filippov jcmvbkbc@gmail.com

commit f406f2d03e07afc199dd8cf501f361dde6be8a69 upstream.

patch_text must invoke patch_text_stop_machine on all online CPUs, but it calls stop_machine_cpuslocked with NULL cpumask. As a result only one CPU runs patch_text_stop_machine potentially leaving stale icache entries on other CPUs. Fix that by calling stop_machine_cpuslocked with cpu_online_mask as the last argument.

Cc: stable@vger.kernel.org Fixes: 64711f9a47d4 ("xtensa: implement jump_label support") Signed-off-by: Max Filippov jcmvbkbc@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/xtensa/kernel/jump_label.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/xtensa/kernel/jump_label.c +++ b/arch/xtensa/kernel/jump_label.c @@ -61,7 +61,7 @@ static void patch_text(unsigned long add .data = data, }; stop_machine_cpuslocked(patch_text_stop_machine, - &patch, NULL); + &patch, cpu_online_mask); } else { unsigned long flags;

From: Hector Martin marcan@marcan.st

commit d19d8e3ba256f81ea4a27209dbbd1f0a00ef1903 upstream.

If boardrev is missing from the NVRAM we add a default one, but this might need more space in the output buffer than was allocated. Ensure we have enough padding for this in the buffer.

Fixes: 46f2b38a91b0 ("brcmfmac: insert default boardrev in nvram data if missing") Reviewed-by: Arend van Spriel arend.vanspriel@broadcom.com Cc: stable@vger.kernel.org Signed-off-by: Hector Martin marcan@marcan.st Reviewed-by: Andy Shevchenko andy.shevchenko@gmail.com Signed-off-by: Kalle Valo kvalo@kernel.org Link: https://lore.kernel.org/r/20220131160713.245637-3-marcan@marcan.st Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c | 2 ++ 1 file changed, 2 insertions(+)

--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c @@ -207,6 +207,8 @@ static int brcmf_init_nvram_parser(struc size = BRCMF_FW_MAX_NVRAM_SIZE; else size = data_len; + /* Add space for properties we may add */ + size += strlen(BRCMF_FW_DEFAULT_BOARDREV) + 1; /* Alloc for extra 0 byte + roundup by 4 + length field */ size += 1 + 3 + sizeof(u32); nvp->nvram = kzalloc(size, GFP_KERNEL);

From: Hector Martin marcan@marcan.st

commit 9466987f246758eb7e9071ae58005253f631271e upstream.

The alignment check was wrong (e.g. & 4 instead of & 3), and the logic was also inefficient if the length was not a multiple of 4, since it would needlessly fall back to copying the entire buffer bytewise.

We already have a perfectly good memcpy_toio function, so just call that instead of rolling our own copy logic here. brcmf_pcie_init_ringbuffers was already using it anyway.

Fixes: 9e37f045d5e7 ("brcmfmac: Adding PCIe bus layer support.") Reviewed-by: Linus Walleij linus.walleij@linaro.org Reviewed-by: Arend van Spriel arend.vanspriel@broadcom.com Reviewed-by: Andy Shevchenko andy.shevchenko@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Hector Martin marcan@marcan.st Signed-off-by: Kalle Valo kvalo@kernel.org Link: https://lore.kernel.org/r/20220131160713.245637-6-marcan@marcan.st Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c | 48 +--------------- 1 file changed, 4 insertions(+), 44 deletions(-)

--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/pcie.c @@ -12,6 +12,7 @@ #include <linux/interrupt.h> #include <linux/bcma/bcma.h> #include <linux/sched.h> +#include <linux/io.h> #include <asm/unaligned.h>

#include <soc.h> @@ -445,47 +446,6 @@ brcmf_pcie_write_ram32(struct brcmf_pcie

static void -brcmf_pcie_copy_mem_todev(struct brcmf_pciedev_info *devinfo, u32 mem_offset, - void *srcaddr, u32 len) -{ - void __iomem *address = devinfo->tcm + mem_offset; - __le32 *src32; - __le16 *src16; - u8 *src8; - - if (((ulong)address & 4) || ((ulong)srcaddr & 4) || (len & 4)) { - if (((ulong)address & 2) || ((ulong)srcaddr & 2) || (len & 2)) { - src8 = (u8 *)srcaddr; - while (len) { - iowrite8(*src8, address); - address++; - src8++; - len--; - } - } else { - len = len / 2; - src16 = (__le16 *)srcaddr; - while (len) { - iowrite16(le16_to_cpu(*src16), address); - address += 2; - src16++; - len--; - } - } - } else { - len = len / 4; - src32 = (__le32 *)srcaddr; - while (len) { - iowrite32(le32_to_cpu(*src32), address); - address += 4; - src32++; - len--; - } - } -} - - -static void brcmf_pcie_copy_dev_tomem(struct brcmf_pciedev_info *devinfo, u32 mem_offset, void *dstaddr, u32 len) { @@ -1561,8 +1521,8 @@ static int brcmf_pcie_download_fw_nvram( return err;

brcmf_dbg(PCIE, "Download FW %s\n", devinfo->fw_name); - brcmf_pcie_copy_mem_todev(devinfo, devinfo->ci->rambase, - (void *)fw->data, fw->size); + memcpy_toio(devinfo->tcm + devinfo->ci->rambase, + (void *)fw->data, fw->size);

resetintr = get_unaligned_le32(fw->data); release_firmware(fw); @@ -1576,7 +1536,7 @@ static int brcmf_pcie_download_fw_nvram( brcmf_dbg(PCIE, "Download NVRAM %s\n", devinfo->nvram_name); address = devinfo->ci->rambase + devinfo->ci->ramsize - nvram_len; - brcmf_pcie_copy_mem_todev(devinfo, address, nvram, nvram_len); + memcpy_toio(devinfo->tcm + address, nvram, nvram_len); brcmf_fw_nvram_free(nvram); } else { brcmf_dbg(PCIE, "No matching NVRAM file found %s\n",

From: Liguang Zhang zhangliguang@linux.alibaba.com

commit 92912b175178c7e895f5e5e9f1e30ac30319162b upstream.

Writes to a Downstream Port's Slot Control register are PCIe hotplug "commands." If the Port supports Command Completed events, software must wait for a command to complete before writing to Slot Control again.

pcie_do_write_cmd() sets ctrl->cmd_busy when it writes to Slot Control. If software notification is enabled, i.e., PCI_EXP_SLTCTL_HPIE and PCI_EXP_SLTCTL_CCIE are set, ctrl->cmd_busy is cleared by pciehp_isr().

But when software notification is disabled, as it is when pcie_init() powers off an empty slot, pcie_wait_cmd() uses pcie_poll_cmd() to poll for command completion, and it neglects to clear ctrl->cmd_busy, which leads to spurious timeouts:

pcieport 0000:00:03.0: pciehp: Timeout on hotplug command 0x01c0 (issued 2264 msec ago) pcieport 0000:00:03.0: pciehp: Timeout on hotplug command 0x05c0 (issued 2288 msec ago)

Clear ctrl->cmd_busy in pcie_poll_cmd() when it detects a Command Completed event (PCI_EXP_SLTSTA_CC).

[bhelgaas: commit log] Fixes: a5dd4b4b0570 ("PCI: pciehp: Wait for hotplug command completion where necessary") Link: https://lore.kernel.org/r/20211111054258.7309-1-zhangliguang@linux.alibaba.c... Link: https://bugzilla.kernel.org/show_bug.cgi?id=215143 Link: https://lore.kernel.org/r/20211126173309.GA12255@wunner.de Signed-off-by: Liguang Zhang zhangliguang@linux.alibaba.com Signed-off-by: Bjorn Helgaas bhelgaas@google.com Reviewed-by: Lukas Wunner lukas@wunner.de Cc: stable@vger.kernel.org # v4.19+ Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/pci/hotplug/pciehp_hpc.c | 2 ++ 1 file changed, 2 insertions(+)

--- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -79,6 +79,8 @@ static int pcie_poll_cmd(struct controll if (slot_status & PCI_EXP_SLTSTA_CC) { pcie_capability_write_word(pdev, PCI_EXP_SLTSTA, PCI_EXP_SLTSTA_CC); + ctrl->cmd_busy = 0; + smp_mb(); return 1; } if (timeout < 0)

From: Tomas Paukrt tomaspaukrt@email.cz

[ Upstream commit 28e9b6d8199a3f124682b143800c2dacdc3d70dd ]

This patch fixes a bug in scatterlist processing that may cause incorrect AES block encryption/decryption.

Fixes: 2e6d793e1bf0 ("crypto: mxs-dcp - Use sg_mapping_iter to copy data") Signed-off-by: Tomas Paukrt tomaspaukrt@email.cz Signed-off-by: Herbert Xu herbert@gondor.apana.org.au Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/crypto/mxs-dcp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/crypto/mxs-dcp.c b/drivers/crypto/mxs-dcp.c index 547111079207..9443f31acd27 100644 --- a/drivers/crypto/mxs-dcp.c +++ b/drivers/crypto/mxs-dcp.c @@ -329,7 +329,7 @@ static int mxs_dcp_aes_block_crypt(struct crypto_async_request *arq) memset(key + AES_KEYSIZE_128, 0, AES_KEYSIZE_128); }

- for_each_sg(req->src, src, sg_nents(src), i) { + for_each_sg(req->src, src, sg_nents(req->src), i) { src_buf = sg_virt(src); len = sg_dma_len(src); tlen += len;

From: Muhammad Usama Anjum usama.anjum@collabora.com

[ Upstream commit b06e15ebd5bfb670f93c7f11a29b8299c1178bc6 ]

Add check to test if CC has a string. CC can have multiple sub-strings like "ccache gcc". Erorr pops up if it is treated as single string and double quotes are used around it. This can be fixed by removing the quotes and not treating CC as a single string.

Fixes: e9886ace222e ("selftests, x86: Rework x86 target architecture detection") Reported-by: "kernelci.org bot" bot@kernelci.org Signed-off-by: Muhammad Usama Anjum usama.anjum@collabora.com Signed-off-by: Dave Hansen dave.hansen@linux.intel.com Link: https://lkml.kernel.org/r/20220214184109.3739179-2-usama.anjum@collabora.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/x86/check_cc.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/tools/testing/selftests/x86/check_cc.sh b/tools/testing/selftests/x86/check_cc.sh index 3e2089c8cf54..8c669c0d662e 100755 --- a/tools/testing/selftests/x86/check_cc.sh +++ b/tools/testing/selftests/x86/check_cc.sh @@ -7,7 +7,7 @@ CC="$1" TESTPROG="$2" shift 2

-if "$CC" -o /dev/null "$TESTPROG" -O0 "$@" 2>/dev/null; then +if [ -n "$CC" ] && $CC -o /dev/null "$TESTPROG" -O0 "$@" 2>/dev/null; then echo 1 else echo 0

From: Gilad Ben-Yossef gilad@benyossef.com

[ Upstream commit 1fb37b5692c915edcc2448a6b37255738c7c77e0 ]

Refuse to try mapping zero bytes as this may cause a fault on some configurations / platforms and it seems the prev. attempt is not enough and we need to be more explicit.

Signed-off-by: Gilad Ben-Yossef gilad@benyossef.com Reported-by: Corentin Labbe clabbe.montjoie@gmail.com Fixes: ce0fc6db38de ("crypto: ccree - protect against empty or NULL scatterlists") Tested-by: Corentin Labbe clabbe.montjoie@gmail.com Signed-off-by: Herbert Xu herbert@gondor.apana.org.au Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/crypto/ccree/cc_buffer_mgr.c | 7 +++++++ 1 file changed, 7 insertions(+)

diff --git a/drivers/crypto/ccree/cc_buffer_mgr.c b/drivers/crypto/ccree/cc_buffer_mgr.c index 954f14bddf1d..dce30ae2b704 100644 --- a/drivers/crypto/ccree/cc_buffer_mgr.c +++ b/drivers/crypto/ccree/cc_buffer_mgr.c @@ -295,6 +295,13 @@ static int cc_map_sg(struct device *dev, struct scatterlist *sg, { int ret = 0;

+ if (!nbytes) { + *mapped_nents = 0; + *lbytes = 0; + *nents = 0; + return 0; + } + *nents = cc_get_sgl_nents(dev, sg, nbytes, lbytes); if (*nents > max_sg_nents) { *nents = 0;

From: Patrick Rudolph patrick.rudolph@9elements.com

[ Upstream commit 686d303ee6301261b422ea51e64833d7909a2c36 ]

On PMBUS devices with multiple pages, the regulator ops need to be protected with the update mutex. This prevents accidentally changing the page in a separate thread while operating on the PMBUS_OPERATION register.

Tested on Infineon xdpe11280 while a separate thread polls for sensor data.

Signed-off-by: Patrick Rudolph patrick.rudolph@9elements.com Signed-off-by: Marcello Sylvester Bauer sylv@sylv.io Link: https://lore.kernel.org/r/b991506bcbf665f7af185945f70bf9d5cf04637c.164580497... Fixes: ddbb4db4ced1b ("hwmon: (pmbus) Add regulator support") Cc: Alan Tull atull@opensource.altera.com Signed-off-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hwmon/pmbus/pmbus_core.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-)

diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c index 8470097907bc..b2dfbd1cb543 100644 --- a/drivers/hwmon/pmbus/pmbus_core.c +++ b/drivers/hwmon/pmbus/pmbus_core.c @@ -2174,10 +2174,14 @@ static int pmbus_regulator_is_enabled(struct regulator_dev *rdev) { struct device *dev = rdev_get_dev(rdev); struct i2c_client *client = to_i2c_client(dev->parent); + struct pmbus_data *data = i2c_get_clientdata(client); u8 page = rdev_get_id(rdev); int ret;

+ mutex_lock(&data->update_lock); ret = pmbus_read_byte_data(client, page, PMBUS_OPERATION); + mutex_unlock(&data->update_lock); + if (ret < 0) return ret;

@@ -2188,11 +2192,17 @@ static int _pmbus_regulator_on_off(struct regulator_dev *rdev, bool enable) { struct device *dev = rdev_get_dev(rdev); struct i2c_client *client = to_i2c_client(dev->parent); + struct pmbus_data *data = i2c_get_clientdata(client); u8 page = rdev_get_id(rdev); + int ret;

- return pmbus_update_byte_data(client, page, PMBUS_OPERATION, - PB_OPERATION_CONTROL_ON, - enable ? PB_OPERATION_CONTROL_ON : 0); + mutex_lock(&data->update_lock); + ret = pmbus_update_byte_data(client, page, PMBUS_OPERATION, + PB_OPERATION_CONTROL_ON, + enable ? PB_OPERATION_CONTROL_ON : 0); + mutex_unlock(&data->update_lock); + + return ret; }

static int pmbus_regulator_enable(struct regulator_dev *rdev)

From: Eric Biggers ebiggers@google.com

[ Upstream commit 0f69288253e9fc7c495047720e523b9f1aba5712 ]

kobjects aren't supposed to be deleted before their child kobjects are deleted. Apparently this is usually benign; however, a WARN will be triggered if one of the child kobjects has a named attribute group:

sysfs group 'modes' not found for kobject 'crypto' WARNING: CPU: 0 PID: 1 at fs/sysfs/group.c:278 sysfs_remove_group+0x72/0x80 ... Call Trace: sysfs_remove_groups+0x29/0x40 fs/sysfs/group.c:312 __kobject_del+0x20/0x80 lib/kobject.c:611 kobject_cleanup+0xa4/0x140 lib/kobject.c:696 kobject_release lib/kobject.c:736 [inline] kref_put include/linux/kref.h:65 [inline] kobject_put+0x53/0x70 lib/kobject.c:753 blk_crypto_sysfs_unregister+0x10/0x20 block/blk-crypto-sysfs.c:159 blk_unregister_queue+0xb0/0x110 block/blk-sysfs.c:962 del_gendisk+0x117/0x250 block/genhd.c:610

Fix this by moving the kobject_del() and the corresponding kobject_uevent() to the correct place.

Fixes: 2c2086afc2b8 ("block: Protect less code with sysfs_lock in blk_{un,}register_queue()") Reviewed-by: Hannes Reinecke hare@suse.de Reviewed-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Reviewed-by: Bart Van Assche bvanassche@acm.org Signed-off-by: Eric Biggers ebiggers@google.com Reviewed-by: Christoph Hellwig hch@lst.de Link: https://lore.kernel.org/r/20220124215938.2769-3-ebiggers@kernel.org Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- block/blk-sysfs.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)

diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c index bf33570da5ac..3fb37135264b 100644 --- a/block/blk-sysfs.c +++ b/block/blk-sysfs.c @@ -1060,15 +1060,17 @@ void blk_unregister_queue(struct gendisk *disk) */ if (queue_is_mq(q)) blk_mq_unregister_dev(disk_to_dev(disk), q); - - kobject_uevent(&q->kobj, KOBJ_REMOVE); - kobject_del(&q->kobj); blk_trace_remove_sysfs(disk_to_dev(disk));

mutex_lock(&q->sysfs_lock); if (q->elevator) elv_unregister_queue(q); mutex_unlock(&q->sysfs_lock); + + /* Now that we've deleted all child objects, we can delete the queue. */ + kobject_uevent(&q->kobj, KOBJ_REMOVE); + kobject_del(&q->kobj); + mutex_unlock(&q->sysfs_dir_lock);

kobject_put(&disk_to_dev(disk)->kobj);

From: Randy Dunlap rdunlap@infradead.org

[ Upstream commit 7a64ca17e4dd50d5f910769167f3553902777844 ]

If an invalid option is given for "test_suspend=<option>", the entire string is added to init's environment, so return 1 instead of 0 from the __setup handler.

Unknown kernel command line parameters "BOOT_IMAGE=/boot/bzImage-517rc5 test_suspend=invalid"

and

Run /sbin/init as init process with arguments: /sbin/init with environment: HOME=/ TERM=linux BOOT_IMAGE=/boot/bzImage-517rc5 test_suspend=invalid

Fixes: 2ce986892faf ("PM / sleep: Enhance test_suspend option with repeat capability") Fixes: 27ddcc6596e5 ("PM / sleep: Add state field to pm_states[] entries") Fixes: a9d7052363a6 ("PM: Separate suspend to RAM functionality from core") Signed-off-by: Randy Dunlap rdunlap@infradead.org Reported-by: Igor Zhbanov i.zhbanov@omprussia.ru Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/power/suspend_test.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/kernel/power/suspend_test.c b/kernel/power/suspend_test.c index 60564b58de07..bfd2a96c695c 100644 --- a/kernel/power/suspend_test.c +++ b/kernel/power/suspend_test.c @@ -157,22 +157,22 @@ static int __init setup_test_suspend(char *value) value++; suspend_type = strsep(&value, ","); if (!suspend_type) - return 0; + return 1;

repeat = strsep(&value, ","); if (repeat) { if (kstrtou32(repeat, 0, &test_repeat_count_max)) - return 0; + return 1; }

for (i = PM_SUSPEND_MIN; i < PM_SUSPEND_MAX; i++) if (!strcmp(pm_labels[i], suspend_type)) { test_state_label = pm_labels[i]; - return 0; + return 1; }

printk(warn_bad_state, suspend_type); - return 0; + return 1; } __setup("test_suspend", setup_test_suspend);

From: Petr Vorel pvorel@suse.cz

[ Upstream commit 647d41d3952d726d4ae49e853a9eff68ebad3b3f ]

vmx-crypto module depends on CRYPTO_AES, CRYPTO_CBC, CRYPTO_CTR or CRYPTO_XTS, thus add them.

These dependencies are likely to be enabled, but if CRYPTO_DEV_VMX=y && !CRYPTO_MANAGER_DISABLE_TESTS and either of CRYPTO_AES, CRYPTO_CBC, CRYPTO_CTR or CRYPTO_XTS is built as module or disabled, alg_test() from crypto/testmgr.c complains during boot about failing to allocate the generic fallback implementations (2 == ENOENT):

[ 0.540953] Failed to allocate xts(aes) fallback: -2 [ 0.541014] alg: skcipher: failed to allocate transform for p8_aes_xts: -2 [ 0.541120] alg: self-tests for p8_aes_xts (xts(aes)) failed (rc=-2) [ 0.544440] Failed to allocate ctr(aes) fallback: -2 [ 0.544497] alg: skcipher: failed to allocate transform for p8_aes_ctr: -2 [ 0.544603] alg: self-tests for p8_aes_ctr (ctr(aes)) failed (rc=-2) [ 0.547992] Failed to allocate cbc(aes) fallback: -2 [ 0.548052] alg: skcipher: failed to allocate transform for p8_aes_cbc: -2 [ 0.548156] alg: self-tests for p8_aes_cbc (cbc(aes)) failed (rc=-2) [ 0.550745] Failed to allocate transformation for 'aes': -2 [ 0.550801] alg: cipher: Failed to load transform for p8_aes: -2 [ 0.550892] alg: self-tests for p8_aes (aes) failed (rc=-2)

Fixes: c07f5d3da643 ("crypto: vmx - Adding support for XTS") Fixes: d2e3ae6f3aba ("crypto: vmx - Enabling VMX module for PPC64")

Suggested-by: Nicolai Stange nstange@suse.de Signed-off-by: Petr Vorel pvorel@suse.cz Signed-off-by: Herbert Xu herbert@gondor.apana.org.au Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/crypto/vmx/Kconfig | 4 ++++ 1 file changed, 4 insertions(+)

diff --git a/drivers/crypto/vmx/Kconfig b/drivers/crypto/vmx/Kconfig index c85fab7ef0bd..b2c28b87f14b 100644 --- a/drivers/crypto/vmx/Kconfig +++ b/drivers/crypto/vmx/Kconfig @@ -2,7 +2,11 @@ config CRYPTO_DEV_VMX_ENCRYPT tristate "Encryption acceleration support on P8 CPU" depends on CRYPTO_DEV_VMX + select CRYPTO_AES + select CRYPTO_CBC + select CRYPTO_CTR select CRYPTO_GHASH + select CRYPTO_XTS default m help Support for VMX cryptographic acceleration instructions on Power8 CPU.

From: Randy Dunlap rdunlap@infradead.org

[ Upstream commit f3303ff649dbf7dcdc6a6e1a922235b12b3028f4 ]

__setup() handlers should return 1 to indicate that the boot option has been handled. Returning 0 causes a boot option to be listed in the Unknown kernel command line parameters and also added to init's arg list (if no '=' sign) or environment list (if of the form 'a=b').

Unknown kernel command line parameters "erst_disable bert_disable hest_disable BOOT_IMAGE=/boot/bzImage-517rc6", will be passed to user space.

Run /sbin/init as init process with arguments: /sbin/init erst_disable bert_disable hest_disable with environment: HOME=/ TERM=linux BOOT_IMAGE=/boot/bzImage-517rc6

Fixes: a3e2acc5e37b ("ACPI / APEI: Add Boot Error Record Table (BERT) support") Fixes: a08f82d08053 ("ACPI, APEI, Error Record Serialization Table (ERST) support") Fixes: 9dc966641677 ("ACPI, APEI, HEST table parsing") Signed-off-by: Randy Dunlap rdunlap@infradead.org Reported-by: Igor Zhbanov i.zhbanov@omprussia.ru Link: lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru Reviewed-by: "Huang, Ying" ying.huang@intel.com Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/acpi/apei/bert.c | 2 +- drivers/acpi/apei/erst.c | 2 +- drivers/acpi/apei/hest.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/acpi/apei/bert.c b/drivers/acpi/apei/bert.c index 1155fb9dcc3a..08d820c04618 100644 --- a/drivers/acpi/apei/bert.c +++ b/drivers/acpi/apei/bert.c @@ -77,7 +77,7 @@ static int __init setup_bert_disable(char *str) { bert_disable = 1;

- return 0; + return 1; } __setup("bert_disable", setup_bert_disable);

diff --git a/drivers/acpi/apei/erst.c b/drivers/acpi/apei/erst.c index 2015a0967cbb..5ee3cb7fcd90 100644 --- a/drivers/acpi/apei/erst.c +++ b/drivers/acpi/apei/erst.c @@ -891,7 +891,7 @@ EXPORT_SYMBOL_GPL(erst_clear); static int __init setup_erst_disable(char *str) { erst_disable = 1; - return 0; + return 1; }

__setup("erst_disable", setup_erst_disable); diff --git a/drivers/acpi/apei/hest.c b/drivers/acpi/apei/hest.c index 267bdbf6a7bf..add6416e78f2 100644 --- a/drivers/acpi/apei/hest.c +++ b/drivers/acpi/apei/hest.c @@ -219,7 +219,7 @@ static int __init hest_ghes_dev_register(unsigned int ghes_count) static int __init setup_hest_disable(char *str) { hest_disable = HEST_DISABLED; - return 0; + return 1; }

__setup("hest_disable", setup_hest_disable);

From: Brandon Wyman bjwyman@gmail.com

[ Upstream commit a5436af598779219b375c1977555c82def1c35d0 ]

If there is an input undervoltage fault, reported in STATUS_INPUT command response, there is quite likely a "Unit Off For Insufficient Input Voltage" condition as well.

Add a constant for bit 3 of STATUS_INPUT. Update the Vin limit attributes to include both bits in the mask for clearing faults.

If an input undervoltage fault occurs, causing a unit off for insufficient input voltage, but the unit is off bit is not cleared, the STATUS_WORD will not be updated to clear the input fault condition. Including the unit is off bit (bit 3) allows for the input fault condition to completely clear.

Signed-off-by: Brandon Wyman bjwyman@gmail.com Link: https://lore.kernel.org/r/20220317232123.2103592-1-bjwyman@gmail.com Fixes: b4ce237b7f7d3 ("hwmon: (pmbus) Introduce infrastructure to detect sensors and limit registers") [groeck: Dropped unnecessary ()] Signed-off-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hwmon/pmbus/pmbus.h | 1 + drivers/hwmon/pmbus/pmbus_core.c | 2 +- 2 files changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/hwmon/pmbus/pmbus.h b/drivers/hwmon/pmbus/pmbus.h index d198af3a92b6..9731f1f830b1 100644 --- a/drivers/hwmon/pmbus/pmbus.h +++ b/drivers/hwmon/pmbus/pmbus.h @@ -292,6 +292,7 @@ enum pmbus_fan_mode { percent = 0, rpm }; /* * STATUS_VOUT, STATUS_INPUT */ +#define PB_VOLTAGE_VIN_OFF BIT(3) #define PB_VOLTAGE_UV_FAULT BIT(4) #define PB_VOLTAGE_UV_WARNING BIT(5) #define PB_VOLTAGE_OV_WARNING BIT(6) diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c index b2dfbd1cb543..beb443d020c2 100644 --- a/drivers/hwmon/pmbus/pmbus_core.c +++ b/drivers/hwmon/pmbus/pmbus_core.c @@ -1324,7 +1324,7 @@ static const struct pmbus_limit_attr vin_limit_attrs[] = { .reg = PMBUS_VIN_UV_FAULT_LIMIT, .attr = "lcrit", .alarm = "lcrit_alarm", - .sbit = PB_VOLTAGE_UV_FAULT, + .sbit = PB_VOLTAGE_UV_FAULT | PB_VOLTAGE_VIN_OFF, }, { .reg = PMBUS_VIN_OV_WARN_LIMIT, .attr = "max",

From: Bharata B Rao bharata@amd.com

[ Upstream commit 28c988c3ec29db74a1dda631b18785958d57df4f ]

The older format of /proc/pid/sched printed home node info which required the mempolicy and task lock around mpol_get(). However the format has changed since then and there is no need for sched_show_numa() any more to have mempolicy argument, asssociated mpol_get/put and task_lock/unlock. Remove them.

Fixes: 397f2378f1361 ("sched/numa: Fix numa balancing stats in /proc/pid/sched") Signed-off-by: Bharata B Rao bharata@amd.com Signed-off-by: Peter Zijlstra (Intel) peterz@infradead.org Reviewed-by: Srikar Dronamraju srikar@linux.vnet.ibm.com Acked-by: Mel Gorman mgorman@suse.de Link: https://lore.kernel.org/r/20220118050515.2973-1-bharata@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/sched/debug.c | 10 ---------- 1 file changed, 10 deletions(-)

diff --git a/kernel/sched/debug.c b/kernel/sched/debug.c index faada713cfae..d5f7fc7099bc 100644 --- a/kernel/sched/debug.c +++ b/kernel/sched/debug.c @@ -847,25 +847,15 @@ void print_numa_stats(struct seq_file *m, int node, unsigned long tsf, static void sched_show_numa(struct task_struct *p, struct seq_file *m) { #ifdef CONFIG_NUMA_BALANCING - struct mempolicy *pol; - if (p->mm) P(mm->numa_scan_seq);

- task_lock(p); - pol = p->mempolicy; - if (pol && !(pol->flags & MPOL_F_MORON)) - pol = NULL; - mpol_get(pol); - task_unlock(p); - P(numa_pages_migrated); P(numa_preferred_nid); P(total_numa_faults); SEQ_printf(m, "current_node=%d, numa_group_id=%d\n", task_node(p), task_numa_group_id(p)); show_numa_stats(p, m); - mpol_put(pol); #endif }

From: Adrian Hunter adrian.hunter@intel.com

[ Upstream commit e5524bf1047eb3b3f3f33b5f59897ba67b3ade87 ]

Change from shifting 'unsigned long' to 'u64' to prevent the config bits being lost on a 32-bit kernel.

Fixes: eadf48cab4b6b0 ("perf/x86/intel/pt: Add support for address range filtering in PT") Signed-off-by: Adrian Hunter adrian.hunter@intel.com Signed-off-by: Peter Zijlstra (Intel) peterz@infradead.org Link: https://lore.kernel.org/r/20220131072453.2839535-5-adrian.hunter@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/events/intel/pt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/events/intel/pt.c b/arch/x86/events/intel/pt.c index da289a44d511..f4d2322f4c62 100644 --- a/arch/x86/events/intel/pt.c +++ b/arch/x86/events/intel/pt.c @@ -460,7 +460,7 @@ static u64 pt_config_filters(struct perf_event *event) pt->filters.filter[range].msr_b = filter->msr_b; }

- rtit_ctl |= filter->config << pt_address_ranges[range].reg_off; + rtit_ctl |= (u64)filter->config << pt_address_ranges[range].reg_off; }

return rtit_ctl;

From: Chao Yu chao@kernel.org

[ Upstream commit df77fbd8c5b222c680444801ffd20e8bbc90a56e ]

Using f2fs_trylock_op() in f2fs_write_compressed_pages() to avoid potential deadlock like we did in f2fs_write_single_data_page().

Signed-off-by: Chao Yu yuchao0@huawei.com Signed-off-by: Jaegeuk Kim jaegeuk@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/f2fs/data.c | 6 +++++- fs/f2fs/node.c | 6 +++++- 2 files changed, 10 insertions(+), 2 deletions(-)

diff --git a/fs/f2fs/data.c b/fs/f2fs/data.c index 1679f9c0b63b..773028921c48 100644 --- a/fs/f2fs/data.c +++ b/fs/f2fs/data.c @@ -2467,8 +2467,12 @@ static int __f2fs_write_data_pages(struct address_space *mapping, /* to avoid spliting IOs due to mixed WB_SYNC_ALL and WB_SYNC_NONE */ if (wbc->sync_mode == WB_SYNC_ALL) atomic_inc(&sbi->wb_sync_req[DATA]); - else if (atomic_read(&sbi->wb_sync_req[DATA])) + else if (atomic_read(&sbi->wb_sync_req[DATA])) { + /* to avoid potential deadlock */ + if (current->plug) + blk_finish_plug(current->plug); goto skip_write; + }

if (__should_serialize_io(inode, wbc)) { mutex_lock(&sbi->writepages); diff --git a/fs/f2fs/node.c b/fs/f2fs/node.c index 0cd1d51dde06..3dc7cc3d6ac6 100644 --- a/fs/f2fs/node.c +++ b/fs/f2fs/node.c @@ -1995,8 +1995,12 @@ static int f2fs_write_node_pages(struct address_space *mapping,

if (wbc->sync_mode == WB_SYNC_ALL) atomic_inc(&sbi->wb_sync_req[NODE]); - else if (atomic_read(&sbi->wb_sync_req[NODE])) + else if (atomic_read(&sbi->wb_sync_req[NODE])) { + /* to avoid potential deadlock */ + if (current->plug) + blk_finish_plug(current->plug); goto skip_write; + }

trace_f2fs_writepages(mapping->host, wbc, NODE);

From: Miaoqian Lin linmq006@gmail.com

[ Upstream commit ca85d271531a1e1c86f24b892f57b7d0a3ddb5a6 ]

The reference taken by 'of_find_device_by_node()' must be released when not needed anymore. Add the corresponding 'put_device()' in the error handling path.

Fixes: e7f3c5481035 ("[media] coda: use VDOA for un-tiling custom macroblock format") Signed-off-by: Miaoqian Lin linmq006@gmail.com Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Mauro Carvalho Chehab mchehab@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/platform/coda/coda-common.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/media/platform/coda/coda-common.c b/drivers/media/platform/coda/coda-common.c index 834f11fe9dc2..0adc54832657 100644 --- a/drivers/media/platform/coda/coda-common.c +++ b/drivers/media/platform/coda/coda-common.c @@ -372,6 +372,7 @@ static struct vdoa_data *coda_get_vdoa_data(void) if (!vdoa_data) vdoa_data = ERR_PTR(-EPROBE_DEFER);

+ put_device(&vdoa_pdev->dev); out: of_node_put(vdoa_node);

From: Jammy Huang jammy_huang@aspeedtech.com

[ Upstream commit 4b732a0016853eaff35944f900b0db66f3914374 ]

Previous reg-field, 0x98[11:0], stands for the period of the detected hsync signal. Use the correct reg, 0xa0, to get h-total in pixels.

Fixes: d2b4387f3bdf ("media: platform: Add Aspeed Video Engine driver") Signed-off-by: Jammy Huang jammy_huang@aspeedtech.com Reviewed-by: Joel Stanley joel@jms.id.au Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Mauro Carvalho Chehab mchehab@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/platform/aspeed-video.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/media/platform/aspeed-video.c b/drivers/media/platform/aspeed-video.c index 1e0867016bf3..c87eddb1c93f 100644 --- a/drivers/media/platform/aspeed-video.c +++ b/drivers/media/platform/aspeed-video.c @@ -151,7 +151,7 @@ #define VE_SRC_TB_EDGE_DET_BOT GENMASK(28, VE_SRC_TB_EDGE_DET_BOT_SHF)

#define VE_MODE_DETECT_STATUS 0x098 -#define VE_MODE_DETECT_H_PIXELS GENMASK(11, 0) +#define VE_MODE_DETECT_H_PERIOD GENMASK(11, 0) #define VE_MODE_DETECT_V_LINES_SHF 16 #define VE_MODE_DETECT_V_LINES GENMASK(27, VE_MODE_DETECT_V_LINES_SHF) #define VE_MODE_DETECT_STATUS_VSYNC BIT(28) @@ -162,6 +162,8 @@ #define VE_SYNC_STATUS_VSYNC_SHF 16 #define VE_SYNC_STATUS_VSYNC GENMASK(27, VE_SYNC_STATUS_VSYNC_SHF)

+#define VE_H_TOTAL_PIXELS 0x0A0 + #define VE_INTERRUPT_CTRL 0x304 #define VE_INTERRUPT_STATUS 0x308 #define VE_INTERRUPT_MODE_DETECT_WD BIT(0) @@ -743,6 +745,7 @@ static void aspeed_video_get_resolution(struct aspeed_video *video) u32 src_lr_edge; u32 src_tb_edge; u32 sync; + u32 htotal; struct v4l2_bt_timings *det = &video->detected_timings;

det->width = MIN_WIDTH; @@ -787,6 +790,7 @@ static void aspeed_video_get_resolution(struct aspeed_video *video) src_tb_edge = aspeed_video_read(video, VE_SRC_TB_EDGE_DET); mds = aspeed_video_read(video, VE_MODE_DETECT_STATUS); sync = aspeed_video_read(video, VE_SYNC_STATUS); + htotal = aspeed_video_read(video, VE_H_TOTAL_PIXELS);

video->frame_bottom = (src_tb_edge & VE_SRC_TB_EDGE_DET_BOT) >> VE_SRC_TB_EDGE_DET_BOT_SHF; @@ -803,8 +807,7 @@ static void aspeed_video_get_resolution(struct aspeed_video *video) VE_SRC_LR_EDGE_DET_RT_SHF; video->frame_left = src_lr_edge & VE_SRC_LR_EDGE_DET_LEFT; det->hfrontporch = video->frame_left; - det->hbackporch = (mds & VE_MODE_DETECT_H_PIXELS) - - video->frame_right; + det->hbackporch = htotal - video->frame_right; det->hsync = sync & VE_SYNC_STATUS_HSYNC; if (video->frame_left > video->frame_right) continue;

From: Dan Carpenter dan.carpenter@oracle.com

[ Upstream commit fee5c1e4b789e41719af9fee0e2dd397cd31988f ]

If "sinfo->config" is not found, then return -ENODEV. Don't return success.

Fixes: b985172b328a ("video: atmel_lcdfb: add device tree suport") Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Acked-by: Nicolas Ferre nicolas.ferre@microchip.com Signed-off-by: Helge Deller deller@gmx.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/video/fbdev/atmel_lcdfb.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/drivers/video/fbdev/atmel_lcdfb.c b/drivers/video/fbdev/atmel_lcdfb.c index cf2bfff2efbf..b91919861075 100644 --- a/drivers/video/fbdev/atmel_lcdfb.c +++ b/drivers/video/fbdev/atmel_lcdfb.c @@ -1062,15 +1062,16 @@ static int __init atmel_lcdfb_probe(struct platform_device *pdev)

INIT_LIST_HEAD(&info->modelist);

- if (pdev->dev.of_node) { - ret = atmel_lcdfb_of_init(sinfo); - if (ret) - goto free_info; - } else { + if (!pdev->dev.of_node) { dev_err(dev, "cannot get default configuration\n"); goto free_info; }

+ ret = atmel_lcdfb_of_init(sinfo); + if (ret) + goto free_info; + + ret = -ENODEV; if (!sinfo->config) goto free_info;

From: Pavel Kubelun be.dissent@gmail.com

[ Upstream commit 3d7e7980993d2c1ae42d3d314040fc2de6a9c45f ]

It seems like sleep_clk was copied from ipq806x. Fix ipq40xx sleep_clk to the value QSDK defines.

Link: https://source.codeaurora.org/quic/qsdk/oss/kernel/linux-msm/commit/?id=d92e... Link: https://patchwork.kernel.org/comment/22721613/ Fixes: bec6ba4cdf2a ("qcom: ipq4019: Add basic board/dts support for IPQ4019 SoC") Suggested-by: Bjorn Andersson bjorn.andersson@linaro.org (clock-output-names) Signed-off-by: Pavel Kubelun be.dissent@gmail.com Signed-off-by: Christian Lamparter chunkeey@gmail.com (removed clock rename) Signed-off-by: Bjorn Andersson bjorn.andersson@linaro.org Link: https://lore.kernel.org/r/20211220170352.34591-1-chunkeey@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/qcom-ipq4019.dtsi | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi index 56f51599852d..338256c59ca5 100644 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi @@ -141,7 +141,8 @@ clocks { sleep_clk: sleep_clk { compatible = "fixed-clock"; - clock-frequency = <32768>; + clock-frequency = <32000>; + clock-output-names = "gcc_sleep_clk_src"; #clock-cells = <0>; };

From: Daniel Thompson daniel.thompson@linaro.org

[ Upstream commit 8030cb9a55688c1339edd284d9d6ce5f9fc75160 ]

Quoting the header comments, IRQF_ONESHOT is "Used by threaded interrupts which need to keep the irq line disabled until the threaded handler has been run.". When applied to an interrupt that doesn't request a threaded irq then IRQF_ONESHOT has a lesser known (undocumented?) side effect, which it to disable the forced threading of the irq. For "normal" kernels (without forced threading) then, if there is no thread_fn, then IRQF_ONESHOT is a nop.

In this case disabling forced threading is not appropriate for this driver because it calls wake_up_all() and this API cannot be called from no-thread interrupt handlers on PREEMPT_RT systems (deadlock risk, triggers sleeping-while-atomic warnings).

Fix this by removing IRQF_ONESHOT.

Fixes: 2209481409b7 ("soc: qcom: Add AOSS QMP driver") Signed-off-by: Daniel Thompson daniel.thompson@linaro.org [bjorn: Added Fixes tag] Signed-off-by: Bjorn Andersson bjorn.andersson@linaro.org Link: https://lore.kernel.org/r/20220127173554.158111-1-daniel.thompson@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/soc/qcom/qcom_aoss.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/soc/qcom/qcom_aoss.c b/drivers/soc/qcom/qcom_aoss.c index 45c5aa712eda..f16d6ec78064 100644 --- a/drivers/soc/qcom/qcom_aoss.c +++ b/drivers/soc/qcom/qcom_aoss.c @@ -544,7 +544,7 @@ static int qmp_probe(struct platform_device *pdev) }

irq = platform_get_irq(pdev, 0); - ret = devm_request_irq(&pdev->dev, irq, qmp_intr, IRQF_ONESHOT, + ret = devm_request_irq(&pdev->dev, irq, qmp_intr, 0, "aoss-qmp", qmp); if (ret < 0) { dev_err(&pdev->dev, "failed to request interrupt\n");

From: Miaoqian Lin linmq006@gmail.com

[ Upstream commit c3d66a164c726cc3b072232d3b6d87575d194084 ]

platform_get_irq() returns negative error number instead 0 on failure. And the doc of platform_get_irq() provides a usage example:

int irq = platform_get_irq(pdev, 0); if (irq < 0) return irq;

Fix the check of return value to catch errors correctly.

Fixes: cdd5de500b2c ("soc: ti: Add wkup_m3_ipc driver") Signed-off-by: Miaoqian Lin linmq006@gmail.com Signed-off-by: Nishanth Menon nm@ti.com Acked-by: Dave Gerlach d-gerlach@ti.com Link: https://lore.kernel.org/r/20220114062840.16620-1-linmq006@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/soc/ti/wkup_m3_ipc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/soc/ti/wkup_m3_ipc.c b/drivers/soc/ti/wkup_m3_ipc.c index e9ece45d7a33..ef3f95fefab5 100644 --- a/drivers/soc/ti/wkup_m3_ipc.c +++ b/drivers/soc/ti/wkup_m3_ipc.c @@ -447,9 +447,9 @@ static int wkup_m3_ipc_probe(struct platform_device *pdev) }

irq = platform_get_irq(pdev, 0); - if (!irq) { + if (irq < 0) { dev_err(&pdev->dev, "no irq resource\n"); - return -ENXIO; + return irq; }

ret = devm_request_irq(dev, irq, wkup_m3_txev_handler,

From: Tom Rix trix@redhat.com

[ Upstream commit 4a92fc6e55da5b87cecb572275deaff6ac9dd27e ]

Calling hdmi_infoframe_unpack() with static sizeof(buffer) skips all the size checking done later in hdmi_infoframe_unpack(). A better value is the amount of data read into buffer.

Fixes: 480b8b3e42c3 ("video/hdmi: Pass buffer size to infoframe unpack functions") Signed-off-by: Tom Rix trix@redhat.com Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Mauro Carvalho Chehab mchehab@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/i2c/adv7511-v4l2.c | 2 +- drivers/media/i2c/adv7604.c | 2 +- drivers/media/i2c/adv7842.c | 2 +- 3 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/media/i2c/adv7511-v4l2.c b/drivers/media/i2c/adv7511-v4l2.c index 809fa44ed988..86267e01c251 100644 --- a/drivers/media/i2c/adv7511-v4l2.c +++ b/drivers/media/i2c/adv7511-v4l2.c @@ -555,7 +555,7 @@ static void log_infoframe(struct v4l2_subdev *sd, const struct adv7511_cfg_read_ buffer[3] = 0; buffer[3] = hdmi_infoframe_checksum(buffer, len + 4);

- if (hdmi_infoframe_unpack(&frame, buffer, sizeof(buffer)) < 0) { + if (hdmi_infoframe_unpack(&frame, buffer, len + 4) < 0) { v4l2_err(sd, "%s: unpack of %s infoframe failed\n", __func__, cri->desc); return; } diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c index b887299ac195..1cee69919e1b 100644 --- a/drivers/media/i2c/adv7604.c +++ b/drivers/media/i2c/adv7604.c @@ -2444,7 +2444,7 @@ static int adv76xx_read_infoframe(struct v4l2_subdev *sd, int index, buffer[i + 3] = infoframe_read(sd, adv76xx_cri[index].payload_addr + i);

- if (hdmi_infoframe_unpack(frame, buffer, sizeof(buffer)) < 0) { + if (hdmi_infoframe_unpack(frame, buffer, len + 3) < 0) { v4l2_err(sd, "%s: unpack of %s infoframe failed\n", __func__, adv76xx_cri[index].desc); return -ENOENT; diff --git a/drivers/media/i2c/adv7842.c b/drivers/media/i2c/adv7842.c index 02cbab826d0b..a581e822ce6f 100644 --- a/drivers/media/i2c/adv7842.c +++ b/drivers/media/i2c/adv7842.c @@ -2574,7 +2574,7 @@ static void log_infoframe(struct v4l2_subdev *sd, struct adv7842_cfg_read_infofr for (i = 0; i < len; i++) buffer[i + 3] = infoframe_read(sd, cri->payload_addr + i);

- if (hdmi_infoframe_unpack(&frame, buffer, sizeof(buffer)) < 0) { + if (hdmi_infoframe_unpack(&frame, buffer, len + 3) < 0) { v4l2_err(sd, "%s: unpack of %s infoframe failed\n", __func__, cri->desc); return; }

From: Dan Carpenter dan.carpenter@oracle.com

[ Upstream commit 67e4550ecd6164bfbdff54c169e5bbf9ccfaf14d ]

Call i2c_unregister_device(audio) on this error path.

Fixes: d3b2ccd9e307 ("[media] s2250: convert to the control framework") Signed-off-by: Dan Carpenter dan.carpenter@oracle.com Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/usb/go7007/s2250-board.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-)

diff --git a/drivers/media/usb/go7007/s2250-board.c b/drivers/media/usb/go7007/s2250-board.c index 49e75a1a1f3f..af3b18c6d9e1 100644 --- a/drivers/media/usb/go7007/s2250-board.c +++ b/drivers/media/usb/go7007/s2250-board.c @@ -504,6 +504,7 @@ static int s2250_probe(struct i2c_client *client, u8 *data; struct go7007 *go = i2c_get_adapdata(adapter); struct go7007_usb *usb = go->hpi_context; + int err = -EIO;

audio = i2c_new_dummy_device(adapter, TLV320_ADDRESS >> 1); if (IS_ERR(audio)) @@ -532,11 +533,8 @@ static int s2250_probe(struct i2c_client *client, V4L2_CID_HUE, -512, 511, 1, 0); sd->ctrl_handler = &state->hdl; if (state->hdl.error) { - int err = state->hdl.error; - - v4l2_ctrl_handler_free(&state->hdl); - kfree(state); - return err; + err = state->hdl.error; + goto fail; }

state->std = V4L2_STD_NTSC; @@ -600,7 +598,7 @@ static int s2250_probe(struct i2c_client *client, i2c_unregister_device(audio); v4l2_ctrl_handler_free(&state->hdl); kfree(state); - return -EIO; + return err; }

static int s2250_remove(struct i2c_client *client)

From: Jia-Ju Bai baijiaju1990@gmail.com

[ Upstream commit 4d06f92f38b799295ae22c98be7a20cac3e2a1a7 ]

The function devm_kzalloc() in rt5663_parse_dp() can fail, so its return value should be checked.

Fixes: 457c25efc592 ("ASoC: rt5663: Add the function of impedance sensing") Reported-by: TOTE Robot oslab@tsinghua.edu.cn Signed-off-by: Jia-Ju Bai baijiaju1990@gmail.com Link: https://lore.kernel.org/r/20220225131030.27248-1-baijiaju1990@gmail.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/rt5663.c | 2 ++ 1 file changed, 2 insertions(+)

diff --git a/sound/soc/codecs/rt5663.c b/sound/soc/codecs/rt5663.c index 3610be1590fc..19e2f622718d 100644 --- a/sound/soc/codecs/rt5663.c +++ b/sound/soc/codecs/rt5663.c @@ -3478,6 +3478,8 @@ static int rt5663_parse_dp(struct rt5663_priv *rt5663, struct device *dev) table_size = sizeof(struct impedance_mapping_table) * rt5663->pdata.impedance_sensing_num; rt5663->imp_table = devm_kzalloc(dev, table_size, GFP_KERNEL); + if (!rt5663->imp_table) + return -ENOMEM; ret = device_property_read_u32_array(dev, "realtek,impedance_sensing_table", (u32 *)rt5663->imp_table, table_size);

From: Jiasheng Jiang jiasheng@iscas.ac.cn

[ Upstream commit ca1697eb09208f0168d94b88b72f57505339cbe5 ]

As the potential failure of the clk_enable(), it should be better to check it and return error if fails.

Fixes: 3568459a5113 ("ALSA: at73c213: manage SSC clock") Signed-off-by: Jiasheng Jiang jiasheng@iscas.ac.cn Link: https://lore.kernel.org/r/20220228022839.3547266-1-jiasheng@iscas.ac.cn Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/spi/at73c213.c | 27 +++++++++++++++++++++------ 1 file changed, 21 insertions(+), 6 deletions(-)

diff --git a/sound/spi/at73c213.c b/sound/spi/at73c213.c index 4de1ba9a418d..6e5d315bab59 100644 --- a/sound/spi/at73c213.c +++ b/sound/spi/at73c213.c @@ -218,7 +218,9 @@ static int snd_at73c213_pcm_open(struct snd_pcm_substream *substream) runtime->hw = snd_at73c213_playback_hw; chip->substream = substream;

- clk_enable(chip->ssc->clk); + err = clk_enable(chip->ssc->clk); + if (err) + return err;

return 0; } @@ -784,7 +786,9 @@ static int snd_at73c213_chip_init(struct snd_at73c213 *chip) goto out;

/* Enable DAC master clock. */ - clk_enable(chip->board->dac_clk); + retval = clk_enable(chip->board->dac_clk); + if (retval) + goto out;

/* Initialize at73c213 on SPI bus. */ retval = snd_at73c213_write_reg(chip, DAC_RST, 0x04); @@ -897,7 +901,9 @@ static int snd_at73c213_dev_init(struct snd_card *card, chip->card = card; chip->irq = -1;

- clk_enable(chip->ssc->clk); + retval = clk_enable(chip->ssc->clk); + if (retval) + return retval;

retval = request_irq(irq, snd_at73c213_interrupt, 0, "at73c213", chip); if (retval) { @@ -1016,7 +1022,9 @@ static int snd_at73c213_remove(struct spi_device *spi) int retval;

/* Stop playback. */ - clk_enable(chip->ssc->clk); + retval = clk_enable(chip->ssc->clk); + if (retval) + goto out; ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXDIS)); clk_disable(chip->ssc->clk);

@@ -1096,9 +1104,16 @@ static int snd_at73c213_resume(struct device *dev) { struct snd_card *card = dev_get_drvdata(dev); struct snd_at73c213 *chip = card->private_data; + int retval;

- clk_enable(chip->board->dac_clk); - clk_enable(chip->ssc->clk); + retval = clk_enable(chip->board->dac_clk); + if (retval) + return retval; + retval = clk_enable(chip->ssc->clk); + if (retval) { + clk_disable(chip->board->dac_clk); + return retval; + } ssc_writel(chip->ssc->regs, CR, SSC_BIT(CR_TXEN));

return 0;

From: Frank Wunderlich frank-w@public-files.de

[ Upstream commit 55927cb44db43a57699fa652e2437a91620385dc ]

After converting ahci-platform txt binding to yaml nodename is reported as not matching the standard:

arch/arm64/boot/dts/broadcom/northstar2/ns2-svk.dt.yaml: ahci@663f2000: $nodename:0: 'ahci@663f2000' does not match '^sata(@.*)?$'

Fix it to match binding.

Fixes: ac9aae00f0fc ("arm64: dts: Add SATA3 AHCI and SATA3 PHY DT nodes for NS2") Signed-off-by: Frank Wunderlich frank-w@public-files.de Signed-off-by: Florian Fainelli f.fainelli@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi index 39802066232e..edc1a8a4c4bc 100644 --- a/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi +++ b/arch/arm64/boot/dts/broadcom/northstar2/ns2.dtsi @@ -687,7 +687,7 @@ }; };

- sata: ahci@663f2000 { + sata: sata@663f2000 { compatible = "brcm,iproc-ahci", "generic-ahci"; reg = <0x663f2000 0x1000>; dma-coherent;

From: Jiasheng Jiang jiasheng@iscas.ac.cn

[ Upstream commit 2ecf362d220317debf5da376e0390e9f7a3f7b29 ]

As the potential failure of the clk_enable(), it should be better to check it, like mxs_saif_trigger().

Fixes: d0ba4c014934 ("ASoC: mxs-saif: set a base clock rate for EXTMASTER mode work") Signed-off-by: Jiasheng Jiang jiasheng@iscas.ac.cn Link: https://lore.kernel.org/r/20220301081717.3727190-1-jiasheng@iscas.ac.cn Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/mxs/mxs-saif.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/sound/soc/mxs/mxs-saif.c b/sound/soc/mxs/mxs-saif.c index 1e38ce858326..cb1b525cbe9d 100644 --- a/sound/soc/mxs/mxs-saif.c +++ b/sound/soc/mxs/mxs-saif.c @@ -455,7 +455,10 @@ static int mxs_saif_hw_params(struct snd_pcm_substream *substream, * basic clock which should be fast enough for the internal * logic. */ - clk_enable(saif->clk); + ret = clk_enable(saif->clk); + if (ret) + return ret; + ret = clk_set_rate(saif->clk, 24000000); clk_disable(saif->clk); if (ret)

From: Jiasheng Jiang jiasheng@iscas.ac.cn

[ Upstream commit de2c6f98817fa5decb9b7d3b3a8a3ab864c10588 ]

There is one call trace that snd_soc_register_card() ->snd_soc_bind_card()->soc_init_pcm_runtime() ->snd_soc_dai_compress_new()->snd_soc_new_compress(). In the trace the 'codec_dai' transfers from card->dai_link, and we can see from the snd_soc_add_pcm_runtime() in snd_soc_bind_card() that, if value of card->dai_link->num_codecs is 0, then 'codec_dai' could be null pointer caused by index out of bound in 'asoc_rtd_to_codec(rtd, 0)'. And snd_soc_register_card() is called by various platforms. Therefore, it is better to add the check in the case of misusing. And because 'cpu_dai' has already checked in soc_init_pcm_runtime(), there is no need to check again. Adding the check as follow, then if 'codec_dai' is null, snd_soc_new_compress() will not pass through the check 'if (playback + capture != 1)', avoiding the leftover use of 'codec_dai'.

Fixes: 467fece ("ASoC: soc-dai: move snd_soc_dai_stream_valid() to soc-dai.c") Signed-off-by: Jiasheng Jiang jiasheng@iscas.ac.cn Reported-by: kernel test robot lkp@intel.com Reported-by: Dan Carpenter dan.carpenter@oracle.com Link: https://lore.kernel.org/r/1634285633-529368-1-git-send-email-jiasheng@iscas.... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/soc-compress.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/sound/soc/soc-compress.c b/sound/soc/soc-compress.c index 9e54d8ae6d2c..fec736c8c45f 100644 --- a/sound/soc/soc-compress.c +++ b/sound/soc/soc-compress.c @@ -872,12 +872,14 @@ int snd_soc_new_compress(struct snd_soc_pcm_runtime *rtd, int num) }

/* check client and interface hw capabilities */ - if (snd_soc_dai_stream_valid(codec_dai, SNDRV_PCM_STREAM_PLAYBACK) && - snd_soc_dai_stream_valid(cpu_dai, SNDRV_PCM_STREAM_PLAYBACK)) - playback = 1; - if (snd_soc_dai_stream_valid(codec_dai, SNDRV_PCM_STREAM_CAPTURE) && - snd_soc_dai_stream_valid(cpu_dai, SNDRV_PCM_STREAM_CAPTURE)) - capture = 1; + if (codec_dai) { + if (snd_soc_dai_stream_valid(codec_dai, SNDRV_PCM_STREAM_PLAYBACK) && + snd_soc_dai_stream_valid(cpu_dai, SNDRV_PCM_STREAM_PLAYBACK)) + playback = 1; + if (snd_soc_dai_stream_valid(codec_dai, SNDRV_PCM_STREAM_CAPTURE) && + snd_soc_dai_stream_valid(cpu_dai, SNDRV_PCM_STREAM_CAPTURE)) + capture = 1; + }

/* * Compress devices are unidirectional so only one of the directions

From: Jia-Ju Bai baijiaju1990@gmail.com

[ Upstream commit 5b5ab1bfa1898c6d52936a57c25c5ceba2cb2f87 ]

The pointer temp is allocated by devm_kzalloc(), so it should be checked for error handling.

Fixes: 7ec944538dde ("memory: emif: add basic infrastructure for EMIF driver") Signed-off-by: Jia-Ju Bai baijiaju1990@gmail.com Link: https://lore.kernel.org/r/20220225132552.27894-1-baijiaju1990@gmail.com Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@canonical.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/memory/emif.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/memory/emif.c b/drivers/memory/emif.c index 0d6b975616bb..9c4c668f9a88 100644 --- a/drivers/memory/emif.c +++ b/drivers/memory/emif.c @@ -1423,7 +1423,7 @@ static struct emif_data *__init_or_module get_device_details( temp = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL); dev_info = devm_kzalloc(dev, sizeof(*dev_info), GFP_KERNEL);

- if (!emif || !pd || !dev_info) { + if (!emif || !temp || !dev_info) { dev_err(dev, "%s:%d: allocation error\n", __func__, __LINE__); goto error; }

From: Rob Herring robh@kernel.org

[ Upstream commit 37cbd3c522869247ed4525b5042ff4c6a276c813 ]

A label reference without brackets is a path string, not a phandle as intended. Add the missing brackets.

Fixes: a5002c41c383 ("arm64: dts: rockchip: add WiFi module support for Firefly-RK3399") Signed-off-by: Rob Herring robh@kernel.org Link: https://lore.kernel.org/r/20220304202559.317749-1-robh@kernel.org Signed-off-by: Heiko Stuebner heiko@sntech.de Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/rockchip/rk3399-firefly.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts index 76f5db696009..5b7e8fbf1ffe 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts +++ b/arch/arm64/boot/dts/rockchip/rk3399-firefly.dts @@ -666,8 +666,8 @@ sd-uhs-sdr104;

/* Power supply */ - vqmmc-supply = &vcc1v8_s3; /* IO line */ - vmmc-supply = &vcc_sdio; /* card's power */ + vqmmc-supply = <&vcc1v8_s3>; /* IO line */ + vmmc-supply = <&vcc_sdio>; /* card's power */

#address-cells = <1>; #size-cells = <0>;

From: Miaoqian Lin linmq006@gmail.com

[ Upstream commit f590797fa3c1bccdd19e55441592a23b46aef449 ]

This node pointer is returned by of_parse_phandle() with refcount incremented in this function. Calling of_node_put() to avoid the refcount leak.

Fixes: 531f67e41dcd ("ASoC: at91sam9g20ek-wm8731: convert to dt support") Signed-off-by: Miaoqian Lin linmq006@gmail.com Reviewed-by: Codrin Ciubotariu codrin.ciubotariu@microchip.com Link: https://lore.kernel.org/r/20220307124539.1743-1-linmq006@gmail.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/atmel/sam9g20_wm8731.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/sound/soc/atmel/sam9g20_wm8731.c b/sound/soc/atmel/sam9g20_wm8731.c index b1bef2bf142d..05277a88e20d 100644 --- a/sound/soc/atmel/sam9g20_wm8731.c +++ b/sound/soc/atmel/sam9g20_wm8731.c @@ -214,6 +214,7 @@ static int at91sam9g20ek_audio_probe(struct platform_device *pdev) cpu_np = of_parse_phandle(np, "atmel,ssc-controller", 0); if (!cpu_np) { dev_err(&pdev->dev, "dai and pcm info missing\n"); + of_node_put(codec_np); return -EINVAL; } at91sam9g20ek_dai.cpus->of_node = cpu_np;

From: Jiasheng Jiang jiasheng@iscas.ac.cn

[ Upstream commit 405afed8a728f23cfaa02f75bbc8bdd6b7322123 ]

As the potential failure of the clk_enable(), it should be better to check it and return error if fails.

Fixes: ab6f6d85210c ("ASoC: fsi: add master clock control functions") Signed-off-by: Jiasheng Jiang jiasheng@iscas.ac.cn Link: https://lore.kernel.org/r/20220302062844.46869-1-jiasheng@iscas.ac.cn Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/sh/fsi.c | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-)

diff --git a/sound/soc/sh/fsi.c b/sound/soc/sh/fsi.c index 3447dbdba1f1..6ac7df30a289 100644 --- a/sound/soc/sh/fsi.c +++ b/sound/soc/sh/fsi.c @@ -816,14 +816,27 @@ static int fsi_clk_enable(struct device *dev, return ret; }

- clk_enable(clock->xck); - clk_enable(clock->ick); - clk_enable(clock->div); + ret = clk_enable(clock->xck); + if (ret) + goto err; + ret = clk_enable(clock->ick); + if (ret) + goto disable_xck; + ret = clk_enable(clock->div); + if (ret) + goto disable_ick;

clock->count++; }

return ret; + +disable_ick: + clk_disable(clock->ick); +disable_xck: + clk_disable(clock->xck); +err: + return ret; }

static int fsi_clk_disable(struct device *dev,

From: Hans Verkuil hverkuil-cisco@xs4all.nl

[ Upstream commit 25e94139218c0293b4375233c14f2256d7dcfaa8 ]

The VIDIOC_G_FBUF and related overlay ioctls no longer worked (-ENOTTY was returned).

The root cause was the introduction of the caps field in ivtv-driver.h. While loading the ivtvfb module would update the video_device device_caps field with V4L2_CAP_VIDEO_OUTPUT_OVERLAY it would not update that caps field, and that's what the overlay ioctls would look at.

It's a bad idea to keep information in two places, so drop the caps field and only use vdev.device_caps.

Signed-off-by: Hans Verkuil hverkuil-cisco@xs4all.nl Reported-by: Martin Dauskardt martin.dauskardt@gmx.de Fixes: 2161536516ed (media: media/pci: set device_caps in struct video_device) Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/pci/ivtv/ivtv-driver.h | 1 - drivers/media/pci/ivtv/ivtv-ioctl.c | 10 +++++----- drivers/media/pci/ivtv/ivtv-streams.c | 11 ++++------- 3 files changed, 9 insertions(+), 13 deletions(-)

diff --git a/drivers/media/pci/ivtv/ivtv-driver.h b/drivers/media/pci/ivtv/ivtv-driver.h index cafba6b1055d..90f38552bd36 100644 --- a/drivers/media/pci/ivtv/ivtv-driver.h +++ b/drivers/media/pci/ivtv/ivtv-driver.h @@ -333,7 +333,6 @@ struct ivtv_stream { struct ivtv *itv; /* for ease of use */ const char *name; /* name of the stream */ int type; /* stream type */ - u32 caps; /* V4L2 capabilities */

struct v4l2_fh *fh; /* pointer to the streaming filehandle */ spinlock_t qlock; /* locks access to the queues */ diff --git a/drivers/media/pci/ivtv/ivtv-ioctl.c b/drivers/media/pci/ivtv/ivtv-ioctl.c index 137853944e46..396cc931f41a 100644 --- a/drivers/media/pci/ivtv/ivtv-ioctl.c +++ b/drivers/media/pci/ivtv/ivtv-ioctl.c @@ -443,7 +443,7 @@ static int ivtv_g_fmt_vid_out_overlay(struct file *file, void *fh, struct v4l2_f struct ivtv_stream *s = &itv->streams[fh2id(fh)->type]; struct v4l2_window *winfmt = &fmt->fmt.win;

- if (!(s->caps & V4L2_CAP_VIDEO_OUTPUT_OVERLAY)) + if (!(s->vdev.device_caps & V4L2_CAP_VIDEO_OUTPUT_OVERLAY)) return -EINVAL; if (!itv->osd_video_pbase) return -EINVAL; @@ -554,7 +554,7 @@ static int ivtv_try_fmt_vid_out_overlay(struct file *file, void *fh, struct v4l2 u32 chromakey = fmt->fmt.win.chromakey; u8 global_alpha = fmt->fmt.win.global_alpha;

- if (!(s->caps & V4L2_CAP_VIDEO_OUTPUT_OVERLAY)) + if (!(s->vdev.device_caps & V4L2_CAP_VIDEO_OUTPUT_OVERLAY)) return -EINVAL; if (!itv->osd_video_pbase) return -EINVAL; @@ -1386,7 +1386,7 @@ static int ivtv_g_fbuf(struct file *file, void *fh, struct v4l2_framebuffer *fb) 0, };

- if (!(s->caps & V4L2_CAP_VIDEO_OUTPUT_OVERLAY)) + if (!(s->vdev.device_caps & V4L2_CAP_VIDEO_OUTPUT_OVERLAY)) return -ENOTTY; if (!itv->osd_video_pbase) return -ENOTTY; @@ -1453,7 +1453,7 @@ static int ivtv_s_fbuf(struct file *file, void *fh, const struct v4l2_framebuffe struct ivtv_stream *s = &itv->streams[fh2id(fh)->type]; struct yuv_playback_info *yi = &itv->yuv_info;

- if (!(s->caps & V4L2_CAP_VIDEO_OUTPUT_OVERLAY)) + if (!(s->vdev.device_caps & V4L2_CAP_VIDEO_OUTPUT_OVERLAY)) return -ENOTTY; if (!itv->osd_video_pbase) return -ENOTTY; @@ -1473,7 +1473,7 @@ static int ivtv_overlay(struct file *file, void *fh, unsigned int on) struct ivtv *itv = id->itv; struct ivtv_stream *s = &itv->streams[fh2id(fh)->type];

- if (!(s->caps & V4L2_CAP_VIDEO_OUTPUT_OVERLAY)) + if (!(s->vdev.device_caps & V4L2_CAP_VIDEO_OUTPUT_OVERLAY)) return -ENOTTY; if (!itv->osd_video_pbase) return -ENOTTY; diff --git a/drivers/media/pci/ivtv/ivtv-streams.c b/drivers/media/pci/ivtv/ivtv-streams.c index f7de9118f609..200d2100dbff 100644 --- a/drivers/media/pci/ivtv/ivtv-streams.c +++ b/drivers/media/pci/ivtv/ivtv-streams.c @@ -176,7 +176,7 @@ static void ivtv_stream_init(struct ivtv *itv, int type) s->itv = itv; s->type = type; s->name = ivtv_stream_info[type].name; - s->caps = ivtv_stream_info[type].v4l2_caps; + s->vdev.device_caps = ivtv_stream_info[type].v4l2_caps;

if (ivtv_stream_info[type].pio) s->dma = PCI_DMA_NONE; @@ -299,12 +299,9 @@ static int ivtv_reg_dev(struct ivtv *itv, int type) if (s_mpg->vdev.v4l2_dev) num = s_mpg->vdev.num + ivtv_stream_info[type].num_offset; } - s->vdev.device_caps = s->caps; - if (itv->osd_video_pbase) { - itv->streams[IVTV_DEC_STREAM_TYPE_YUV].vdev.device_caps |= - V4L2_CAP_VIDEO_OUTPUT_OVERLAY; - itv->streams[IVTV_DEC_STREAM_TYPE_MPG].vdev.device_caps |= - V4L2_CAP_VIDEO_OUTPUT_OVERLAY; + if (itv->osd_video_pbase && (type == IVTV_DEC_STREAM_TYPE_YUV || + type == IVTV_DEC_STREAM_TYPE_MPG)) { + s->vdev.device_caps |= V4L2_CAP_VIDEO_OUTPUT_OVERLAY; itv->v4l2_cap |= V4L2_CAP_VIDEO_OUTPUT_OVERLAY; } video_set_drvdata(&s->vdev, s);

From: Miaoqian Lin linmq006@gmail.com

[ Upstream commit 6ae0a4d8fec551ec581d620f0eb1fe31f755551c ]

This function only calls of_node_put() in the regular path. And it will cause refcount leak in error paths. For example, when codec_np is NULL, saif_np[0] and saif_np[1] are not NULL, it will cause leaks.

of_node_put() will check if the node pointer is NULL, so we can call it directly to release the refcount of regular pointers.

Fixes: e968194b45c4 ("ASoC: mxs: add device tree support for mxs-sgtl5000") Signed-off-by: Miaoqian Lin linmq006@gmail.com Link: https://lore.kernel.org/r/20220308020146.26496-1-linmq006@gmail.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/mxs/mxs-sgtl5000.c | 3 +++ 1 file changed, 3 insertions(+)

diff --git a/sound/soc/mxs/mxs-sgtl5000.c b/sound/soc/mxs/mxs-sgtl5000.c index 9841e1da9782..8282fe6d00dd 100644 --- a/sound/soc/mxs/mxs-sgtl5000.c +++ b/sound/soc/mxs/mxs-sgtl5000.c @@ -118,6 +118,9 @@ static int mxs_sgtl5000_probe(struct platform_device *pdev) codec_np = of_parse_phandle(np, "audio-codec", 0); if (!saif_np[0] || !saif_np[1] || !codec_np) { dev_err(&pdev->dev, "phandle missing or invalid\n"); + of_node_put(codec_np); + of_node_put(saif_np[0]); + of_node_put(saif_np[1]); return -EINVAL; }

From: Miaoqian Lin linmq006@gmail.com

[ Upstream commit 375a347da4889f64d86e1ab7f4e6702b6e9bf299 ]

Fix the missing clk_disable_unprepare() before return from msm8916_wcd_digital_probe in the error handling case.

Fixes: 150db8c5afa1 ("ASoC: codecs: Add msm8916-wcd digital codec") Signed-off-by: Miaoqian Lin linmq006@gmail.com Link: https://lore.kernel.org/r/20220307084523.28687-1-linmq006@gmail.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/msm8916-wcd-digital.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/sound/soc/codecs/msm8916-wcd-digital.c b/sound/soc/codecs/msm8916-wcd-digital.c index 09fccacadd6b..d5269ab5f91c 100644 --- a/sound/soc/codecs/msm8916-wcd-digital.c +++ b/sound/soc/codecs/msm8916-wcd-digital.c @@ -1201,7 +1201,7 @@ static int msm8916_wcd_digital_probe(struct platform_device *pdev) ret = clk_prepare_enable(priv->mclk); if (ret < 0) { dev_err(dev, "failed to enable mclk %d\n", ret); - return ret; + goto err_clk; }

dev_set_drvdata(dev, priv); @@ -1209,6 +1209,9 @@ static int msm8916_wcd_digital_probe(struct platform_device *pdev) return devm_snd_soc_register_component(dev, &msm8916_wcd_digital, msm8916_wcd_digital_dai, ARRAY_SIZE(msm8916_wcd_digital_dai)); +err_clk: + clk_disable_unprepare(priv->ahbclk); + return ret; }

static int msm8916_wcd_digital_remove(struct platform_device *pdev)

From: Miaoqian Lin linmq006@gmail.com

[ Upstream commit 9ebd62d60edcd4d9c75485e5ccd0b79581ad3c49 ]

In the error handling path, the clk_prepare_enable() function call should be balanced by a corresponding 'clk_disable_unprepare()' call , as already done in the remove function.

Fixes: de66b3455023 ("ASoC: codecs: msm8916-wcd-analog: add MBHC support") Signed-off-by: Miaoqian Lin linmq006@gmail.com Link: https://lore.kernel.org/r/20220316041924.17560-1-linmq006@gmail.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/msm8916-wcd-analog.c | 22 ++++++++++++++++------ 1 file changed, 16 insertions(+), 6 deletions(-)