From: Xingyu Wu xingyu.wu@starfivetech.com
Add I2Srx/I2Stx0/I2Stx1 nodes and pins configuration for the StarFive JH7110 SoC.
Signed-off-by: Xingyu Wu xingyu.wu@starfivetech.com Reviewed-by: Walker Chen walker.chen@starfivetech.com Signed-off-by: Conor Dooley conor.dooley@microchip.com Signed-off-by: WangYuli wangyuli@uniontech.com --- .../jh7110-starfive-visionfive-2.dtsi | 58 +++++++++++++++++ arch/riscv/boot/dts/starfive/jh7110.dtsi | 65 +++++++++++++++++++ 2 files changed, 123 insertions(+)
diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi index 4874e3bb42ab..caa59b9b2f19 100644 --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi @@ -202,6 +202,24 @@ &i2c6 { status = "okay"; };
+&i2srx { + pinctrl-names = "default"; + pinctrl-0 = <&i2srx_pins>; + status = "okay"; +}; + +&i2stx0 { + pinctrl-names = "default"; + pinctrl-0 = <&mclk_ext_pins>; + status = "okay"; +}; + +&i2stx1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2stx1_pins>; + status = "okay"; +}; + &mmc0 { max-frequency = <100000000>; assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO0_SDCARD>; @@ -340,6 +358,46 @@ GPOEN_SYS_I2C6_DATA, }; };
+ i2srx_pins: i2srx-0 { + clk-sd-pins { + pinmux = <GPIOMUX(38, GPOUT_LOW, + GPOEN_DISABLE, + GPI_SYS_I2SRX_BCLK)>, + <GPIOMUX(63, GPOUT_LOW, + GPOEN_DISABLE, + GPI_SYS_I2SRX_LRCK)>, + <GPIOMUX(38, GPOUT_LOW, + GPOEN_DISABLE, + GPI_SYS_I2STX1_BCLK)>, + <GPIOMUX(63, GPOUT_LOW, + GPOEN_DISABLE, + GPI_SYS_I2STX1_LRCK)>, + <GPIOMUX(61, GPOUT_LOW, + GPOEN_DISABLE, + GPI_SYS_I2SRX_SDIN0)>; + input-enable; + }; + }; + + i2stx1_pins: i2stx1-0 { + sd-pins { + pinmux = <GPIOMUX(44, GPOUT_SYS_I2STX1_SDO0, + GPOEN_ENABLE, + GPI_NONE)>; + bias-disable; + input-disable; + }; + }; + + mclk_ext_pins: mclk-ext-0 { + mclk-ext-pins { + pinmux = <GPIOMUX(4, GPOUT_LOW, + GPOEN_DISABLE, + GPI_SYS_MCLK_EXT)>; + input-enable; + }; + }; + mmc0_pins: mmc0-0 { rst-pins { pinmux = <GPIOMUX(62, GPOUT_SYS_SDIO0_RST, diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi index e85464c328d0..621b68c02ea8 100644 --- a/arch/riscv/boot/dts/starfive/jh7110.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi @@ -512,6 +512,30 @@ tdm: tdm@10090000 { status = "disabled"; };
+ i2srx: i2s@100e0000 { + compatible = "starfive,jh7110-i2srx"; + reg = <0x0 0x100e0000 0x0 0x1000>; + clocks = <&syscrg JH7110_SYSCLK_I2SRX_BCLK_MST>, + <&syscrg JH7110_SYSCLK_I2SRX_APB>, + <&syscrg JH7110_SYSCLK_MCLK>, + <&syscrg JH7110_SYSCLK_MCLK_INNER>, + <&mclk_ext>, + <&syscrg JH7110_SYSCLK_I2SRX_BCLK>, + <&syscrg JH7110_SYSCLK_I2SRX_LRCK>, + <&i2srx_bclk_ext>, + <&i2srx_lrck_ext>; + clock-names = "i2sclk", "apb", "mclk", + "mclk_inner", "mclk_ext", "bclk", + "lrck", "bclk_ext", "lrck_ext"; + resets = <&syscrg JH7110_SYSRST_I2SRX_APB>, + <&syscrg JH7110_SYSRST_I2SRX_BCLK>; + dmas = <0>, <&dma 24>; + dma-names = "tx", "rx"; + starfive,syscon = <&sys_syscon 0x18 0x2>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + usb0: usb@10100000 { compatible = "starfive,jh7110-usb"; ranges = <0x0 0x0 0x10100000 0x100000>; @@ -736,6 +760,47 @@ spi6: spi@120a0000 { status = "disabled"; };
+ i2stx0: i2s@120b0000 { + compatible = "starfive,jh7110-i2stx0"; + reg = <0x0 0x120b0000 0x0 0x1000>; + clocks = <&syscrg JH7110_SYSCLK_I2STX0_BCLK_MST>, + <&syscrg JH7110_SYSCLK_I2STX0_APB>, + <&syscrg JH7110_SYSCLK_MCLK>, + <&syscrg JH7110_SYSCLK_MCLK_INNER>, + <&mclk_ext>; + clock-names = "i2sclk", "apb", "mclk", + "mclk_inner","mclk_ext"; + resets = <&syscrg JH7110_SYSRST_I2STX0_APB>, + <&syscrg JH7110_SYSRST_I2STX0_BCLK>; + dmas = <&dma 47>; + dma-names = "tx"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2stx1: i2s@120c0000 { + compatible = "starfive,jh7110-i2stx1"; + reg = <0x0 0x120c0000 0x0 0x1000>; + clocks = <&syscrg JH7110_SYSCLK_I2STX1_BCLK_MST>, + <&syscrg JH7110_SYSCLK_I2STX1_APB>, + <&syscrg JH7110_SYSCLK_MCLK>, + <&syscrg JH7110_SYSCLK_MCLK_INNER>, + <&mclk_ext>, + <&syscrg JH7110_SYSCLK_I2STX1_BCLK>, + <&syscrg JH7110_SYSCLK_I2STX1_LRCK>, + <&i2stx_bclk_ext>, + <&i2stx_lrck_ext>; + clock-names = "i2sclk", "apb", "mclk", + "mclk_inner", "mclk_ext", "bclk", + "lrck", "bclk_ext", "lrck_ext"; + resets = <&syscrg JH7110_SYSRST_I2STX1_APB>, + <&syscrg JH7110_SYSRST_I2STX1_BCLK>; + dmas = <&dma 48>; + dma-names = "tx"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + sfctemp: temperature-sensor@120e0000 { compatible = "starfive,jh7110-temp"; reg = <0x0 0x120e0000 0x0 0x10000>;
linux-stable-mirror@lists.linaro.org