Hi stable team,

I would suggest to apply the patch 470a66268856 ("i2c: stm32f7: Add atomic_xfer method to driver") from 6.7-rc1 to the stable Kernel 6.6.y.

Here is why: After the commit 6e9df38f359a ("mfd: stpmic1: Add PMIC poweroff via sys-off handler") from 6.5-rc1 the following WARNING appears after calling the poweroff command:

[ 791.813369] systemd-shutdown[1]: Syncing filesystems and block devices. [ 792.865580] systemd-shutdown[1]: Sending SIGTERM to remaining processes... [ 792.921103] systemd-journald[101]: Received SIGTERM from PID 1 (systemd-shutdow). [ 792.936515] systemd-shutdown[1]: Sending SIGKILL to remaining processes... [ 792.968715] systemd-shutdown[1]: Unmounting file systems. [ 792.979332] (sd-remount)[315]: Remounting '/' read-only with options ''. [ 793.219266] EXT4-fs (mmcblk2p4): re-mounted f7da42a1-2eed-4d39-a31e-e0ffadb97b28 ro. Quota mode: disabled. [ 793.238398] systemd-shutdown[1]: All filesystems unmounted. [ 793.242736] systemd-shutdown[1]: Deactivating swaps. [ 793.248004] systemd-shutdown[1]: All swaps deactivated. [ 793.252937] systemd-shutdown[1]: Detaching loop devices. [ 793.272548] systemd-shutdown[1]: All loop devices detached. [ 793.276918] systemd-shutdown[1]: Stopping MD devices. [ 793.282790] systemd-shutdown[1]: All MD devices stopped. [ 793.287128] systemd-shutdown[1]: Detaching DM devices. [ 793.292995] systemd-shutdown[1]: All DM devices detached. [ 793.297731] systemd-shutdown[1]: All filesystems, swaps, loop devices, MD devices and DM devices detached. [ 793.320636] systemd-shutdown[1]: Syncing filesystems and block devices. [ 793.326078] systemd-shutdown[1]: Powering off. [ 793.348421] reboot: Power down [ 793.350129] ------------[ cut here ]------------ [ 793.354691] WARNING: CPU: 0 PID: 1 at drivers/i2c/i2c-core.h:42 i2c_transfer+0x5d/0x7c [ 793.362617] No atomic I2C transfer handler for 'i2c-2' [ 793.367780] Modules linked in: [ 793.370838] CPU: 0 PID: 1 Comm: systemd-shutdow Not tainted 6.6.41-lardisbox2-00053-g41e0b7f0166f #12 [ 793.380047] Hardware name: STM32 (Device Tree Support) [ 793.385122] unwind_backtrace from show_stack+0xb/0xc [ 793.390215] show_stack from dump_stack_lvl+0x2b/0x34 [ 793.395202] dump_stack_lvl from __warn+0x5d/0xc4 [ 793.399993] __warn from warn_slowpath_fmt+0x55/0xa8 [ 793.404887] warn_slowpath_fmt from i2c_transfer+0x5d/0x7c [ 793.410387] i2c_transfer from regmap_i2c_read+0x41/0x6c [ 793.415681] regmap_i2c_read from _regmap_raw_read+0x87/0xe8 [ 793.421378] _regmap_raw_read from _regmap_bus_read+0x21/0x38 [ 793.427079] _regmap_bus_read from _regmap_read+0x55/0x9c [ 793.432477] _regmap_read from _regmap_update_bits+0x71/0xa4 [ 793.438175] _regmap_update_bits from regmap_update_bits_base+0x2f/0x42 [ 793.444784] regmap_update_bits_base from stpmic1_power_off+0x19/0x20 [ 793.451188] stpmic1_power_off from sys_off_notify+0x1b/0x38 [ 793.456880] sys_off_notify from notifier_call_chain+0x57/0x78 [ 793.462668] notifier_call_chain from atomic_notifier_call_chain+0x11/0x16 [ 793.469562] atomic_notifier_call_chain from do_kernel_power_off+0x21/0x38 [ 793.476461] do_kernel_power_off from __do_sys_reboot+0xdf/0x150 [ 793.482456] __do_sys_reboot from ret_fast_syscall+0x1/0x5c [ 793.488042] Exception stack(0xf0815fa8 to 0xf0815ff0) [ 793.493017] 5fa0: 00000000 00000000 fee1dead 28121969 4321fedc 00000000 [ 793.501218] 5fc0: 00000000 00000000 00000000 00000058 0001884c 00000003 00000000 00018140 [ 793.509414] 5fe0: 00000058 bee18c34 b6c20cdd b6b995a6 [ 793.514478] ---[ end trace 000000000000000

This can be eliminated by backporting the above mentioned patch. I tested it with a DHCOM stm32mp157c on a PDK2 board.

Thanks and regards Christoph