To properly disable checksum offloading, the split header mode must also be disabled. When split header mode is disabled, the network device stores received packets (with size <= 1536 bytes) entirely in buffer1, leaving buffer2 empty. However, with the current DMA configuration, only 256 bytes from buffer1 are copied from the network device to system memory, resulting in the loss of the remaining packet data.

Address the issue by programming the ARBS field to 256 bytes, which aligns with the socket buffer size, and setting the SPH bit in the control register to disable split header mode. With this configuration, the network device stores the first 256 bytes of the received packet in buffer1 and the remaining data in buffer2. The DMA is then able to transfer the full packet from the network device to system memory without any data loss.

Cc: stable@vger.kernel.org Fixes: c5aa9e3b8156 ("amd-xgbe: Initial AMD 10GbE platform driver") Signed-off-by: Vishal Badole Vishal.Badole@amd.com --- drivers/net/ethernet/amd/xgbe/xgbe-common.h | 2 ++ drivers/net/ethernet/amd/xgbe/xgbe-dev.c | 18 ++++++++++++++++++ drivers/net/ethernet/amd/xgbe/xgbe.h | 5 +++++ 3 files changed, 25 insertions(+)

diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-common.h b/drivers/net/ethernet/amd/xgbe/xgbe-common.h index bcb221f74875..d92453ee2505 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe-common.h +++ b/drivers/net/ethernet/amd/xgbe/xgbe-common.h @@ -232,6 +232,8 @@ #define DMA_CH_IER_TIE_WIDTH 1 #define DMA_CH_IER_TXSE_INDEX 1 #define DMA_CH_IER_TXSE_WIDTH 1 +#define DMA_CH_RCR_ARBS_INDEX 28 +#define DMA_CH_RCR_ARBS_WIDTH 3 #define DMA_CH_RCR_PBL_INDEX 16 #define DMA_CH_RCR_PBL_WIDTH 6 #define DMA_CH_RCR_RBSZ_INDEX 1 diff --git a/drivers/net/ethernet/amd/xgbe/xgbe-dev.c b/drivers/net/ethernet/amd/xgbe/xgbe-dev.c index 7a923b6e83df..429c5e1444d8 100644 --- a/drivers/net/ethernet/amd/xgbe/xgbe-dev.c +++ b/drivers/net/ethernet/amd/xgbe/xgbe-dev.c @@ -292,6 +292,8 @@ static void xgbe_config_rx_buffer_size(struct xgbe_prv_data *pdata)

XGMAC_DMA_IOWRITE_BITS(pdata->channel[i], DMA_CH_RCR, RBSZ, pdata->rx_buf_size); + XGMAC_DMA_IOWRITE_BITS(pdata->channel[i], DMA_CH_RCR, ARBS, + XGBE_ARBS_SIZE); } }

@@ -321,6 +323,18 @@ static void xgbe_config_sph_mode(struct xgbe_prv_data *pdata) XGMAC_IOWRITE_BITS(pdata, MAC_RCR, HDSMS, XGBE_SPH_HDSMS_SIZE); }

+static void xgbe_disable_sph_mode(struct xgbe_prv_data *pdata) +{ + unsigned int i; + + for (i = 0; i < pdata->channel_count; i++) { + if (!pdata->channel[i]->rx_ring) + break; + + XGMAC_DMA_IOWRITE_BITS(pdata->channel[i], DMA_CH_CR, SPH, 0); + } +} + static int xgbe_write_rss_reg(struct xgbe_prv_data *pdata, unsigned int type, unsigned int index, unsigned int val) { @@ -3910,5 +3924,9 @@ void xgbe_init_function_ptrs_dev(struct xgbe_hw_if *hw_if) hw_if->disable_vxlan = xgbe_disable_vxlan; hw_if->set_vxlan_id = xgbe_set_vxlan_id;

+ /* For Split Header*/ + hw_if->enable_sph = xgbe_config_sph_mode; + hw_if->disable_sph = xgbe_disable_sph_mode; + DBGPR("<--xgbe_init_function_ptrs\n"); } diff --git a/drivers/net/ethernet/amd/xgbe/xgbe.h b/drivers/net/ethernet/amd/xgbe/xgbe.h index db73c8f8b139..1b9c679453fb 100755 --- a/drivers/net/ethernet/amd/xgbe/xgbe.h +++ b/drivers/net/ethernet/amd/xgbe/xgbe.h @@ -166,6 +166,7 @@ #define XGBE_RX_BUF_ALIGN 64 #define XGBE_SKB_ALLOC_SIZE 256 #define XGBE_SPH_HDSMS_SIZE 2 /* Keep in sync with SKB_ALLOC_SIZE */ +#define XGBE_ARBS_SIZE 3

#define XGBE_MAX_DMA_CHANNELS 16 #define XGBE_MAX_QUEUES 16 @@ -902,6 +903,10 @@ struct xgbe_hw_if { void (*enable_vxlan)(struct xgbe_prv_data *); void (*disable_vxlan)(struct xgbe_prv_data *); void (*set_vxlan_id)(struct xgbe_prv_data *); + + /* For Split Header */ + void (*enable_sph)(struct xgbe_prv_data *pdata); + void (*disable_sph)(struct xgbe_prv_data *pdata); };

/* This structure represents implementation specific routines for an