Commit 76821e222c18 ("serial: imx: ensure that RX irqs are off if RX is off") accidentally enabled overrun interrupts unconditionally when deferring DMA enable until after the receiver has been enabled during startup.

Fix this by using the DMA-initialised instead of DMA-enabled flag to determine whether overrun interrupts should be enabled.

Note that overrun interrupts are already accounted for in imx_uart_clear_rx_errors() when using DMA since commit 41d98b5da92f ("serial: imx-serial - update RX error counters when DMA is used").

Fixes: 76821e222c18 ("serial: imx: ensure that RX irqs are off if RX is off") Cc: stable@vger.kernel.org # 4.17 Cc: Uwe Kleine-König u.kleine-koenig@pengutronix.de Signed-off-by: Johan Hovold johan@kernel.org --- drivers/tty/serial/imx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index fd38e6ed4fda..a2100be8d554 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -1448,7 +1448,7 @@ static int imx_uart_startup(struct uart_port *port) imx_uart_writel(sport, ucr1, UCR1);

ucr4 = imx_uart_readl(sport, UCR4) & ~(UCR4_OREN | UCR4_INVR); - if (!sport->dma_is_enabled) + if (!dma_is_inited) ucr4 |= UCR4_OREN; if (sport->inverted_rx) ucr4 |= UCR4_INVR;