[PATCH AUTOSEL 4.19 01/10] blk-throttle: fix lockdep warning of "cgroup_mutex or RCU read lock required!"
From: Ming Lei ming.lei@redhat.com
[ Upstream commit 27b13e209ddca5979847a1b57890e0372c1edcee ]
Inside blkg_for_each_descendant_pre(), both css_for_each_descendant_pre() and blkg_lookup() requires RCU read lock, and either cgroup_assert_mutex_or_rcu_locked() or rcu_read_lock_held() is called.
Fix the warning by adding rcu read lock.
Reported-by: Changhui Zhong czhong@redhat.com Signed-off-by: Ming Lei ming.lei@redhat.com Link: https://lore.kernel.org/r/20231117023527.3188627-2-ming.lei@redhat.com Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- block/blk-throttle.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/block/blk-throttle.c b/block/blk-throttle.c index 853b1770df367..e58c03c504c10 100644 --- a/block/blk-throttle.c +++ b/block/blk-throttle.c @@ -1383,6 +1383,7 @@ static void tg_conf_updated(struct throtl_grp *tg, bool global) tg_bps_limit(tg, READ), tg_bps_limit(tg, WRITE), tg_iops_limit(tg, READ), tg_iops_limit(tg, WRITE));
+ rcu_read_lock(); /* * Update has_rules[] flags for the updated tg's subtree. A tg is * considered to have rules if either the tg itself or any of its @@ -1410,6 +1411,7 @@ static void tg_conf_updated(struct throtl_grp *tg, bool global) this_tg->latency_target = max(this_tg->latency_target, parent_tg->latency_target); } + rcu_read_unlock();
/* * We're already holding queue_lock and know @tg is valid. Let's
From: Coly Li colyli@suse.de
[ Upstream commit baf8fb7e0e5ec54ea0839f0c534f2cdcd79bea9c ]
Arraies bcache->stripe_sectors_dirty and bcache->full_dirty_stripes are used for dirty data writeback, their sizes are decided by backing device capacity and stripe size. Larger backing device capacity or smaller stripe size make these two arraies occupies more dynamic memory space.
Currently bcache->stripe_size is directly inherited from queue->limits.io_opt of underlying storage device. For normal hard drives, its limits.io_opt is 0, and bcache sets the corresponding stripe_size to 1TB (1<<31 sectors), it works fine 10+ years. But for devices do declare value for queue->limits.io_opt, small stripe_size (comparing to 1TB) becomes an issue for oversize memory allocations of bcache->stripe_sectors_dirty and bcache->full_dirty_stripes, while the capacity of hard drives gets much larger in recent decade.
For example a raid5 array assembled by three 20TB hardrives, the raid device capacity is 40TB with typical 512KB limits.io_opt. After the math calculation in bcache code, these two arraies will occupy 400MB dynamic memory. Even worse Andrea Tomassetti reports that a 4KB limits.io_opt is declared on a new 2TB hard drive, then these two arraies request 2GB and 512MB dynamic memory from kzalloc(). The result is that bcache device always fails to initialize on his system.
To avoid the oversize memory allocation, bcache->stripe_size should not directly inherited by queue->limits.io_opt from the underlying device. This patch defines BCH_MIN_STRIPE_SZ (4MB) as minimal bcache stripe size and set bcache device's stripe size against the declared limits.io_opt value from the underlying storage device, - If the declared limits.io_opt > BCH_MIN_STRIPE_SZ, bcache device will set its stripe size directly by this limits.io_opt value. - If the declared limits.io_opt < BCH_MIN_STRIPE_SZ, bcache device will set its stripe size by a value multiplying limits.io_opt and euqal or large than BCH_MIN_STRIPE_SZ.
Then the minimal stripe size of a bcache device will always be >= 4MB. For a 40TB raid5 device with 512KB limits.io_opt, memory occupied by bcache->stripe_sectors_dirty and bcache->full_dirty_stripes will be 50MB in total. For a 2TB hard drive with 4KB limits.io_opt, memory occupied by these two arraies will be 2.5MB in total.
Such mount of memory allocated for bcache->stripe_sectors_dirty and bcache->full_dirty_stripes is reasonable for most of storage devices.
Reported-by: Andrea Tomassetti andrea.tomassetti-opensource@devo.com Signed-off-by: Coly Li colyli@suse.de Reviewed-by: Eric Wheeler bcache@lists.ewheeler.net Link: https://lore.kernel.org/r/20231120052503.6122-2-colyli@suse.de Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/md/bcache/bcache.h | 1 + drivers/md/bcache/super.c | 2 ++ 2 files changed, 3 insertions(+)
diff --git a/drivers/md/bcache/bcache.h b/drivers/md/bcache/bcache.h index e81d783109847..d0311e3065caf 100644 --- a/drivers/md/bcache/bcache.h +++ b/drivers/md/bcache/bcache.h @@ -265,6 +265,7 @@ struct bcache_device { #define BCACHE_DEV_WB_RUNNING 3 #define BCACHE_DEV_RATE_DW_RUNNING 4 int nr_stripes; +#define BCH_MIN_STRIPE_SZ ((4 << 20) >> SECTOR_SHIFT) unsigned int stripe_size; atomic_t *stripe_sectors_dirty; unsigned long *full_dirty_stripes; diff --git a/drivers/md/bcache/super.c b/drivers/md/bcache/super.c index 4b076f7f184be..8b4a2bd6b57c9 100644 --- a/drivers/md/bcache/super.c +++ b/drivers/md/bcache/super.c @@ -807,6 +807,8 @@ static int bcache_device_init(struct bcache_device *d, unsigned int block_size,
if (!d->stripe_size) d->stripe_size = 1 << 31; + else if (d->stripe_size < BCH_MIN_STRIPE_SZ) + d->stripe_size = roundup(BCH_MIN_STRIPE_SZ, d->stripe_size);
d->nr_stripes = DIV_ROUND_UP_ULL(sectors, d->stripe_size);
From: Coly Li colyli@suse.de
[ Upstream commit 31f5b956a197d4ec25c8a07cb3a2ab69d0c0b82f ]
This patch adds code comments to bch_btree_node_get() and __bch_btree_node_alloc() that NULL pointer will not be returned and it is unnecessary to check NULL pointer by the callers of these routines.
Signed-off-by: Coly Li colyli@suse.de Link: https://lore.kernel.org/r/20231120052503.6122-10-colyli@suse.de Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/md/bcache/btree.c | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/drivers/md/bcache/btree.c b/drivers/md/bcache/btree.c index 71d670934a07e..62e2ab814c9df 100644 --- a/drivers/md/bcache/btree.c +++ b/drivers/md/bcache/btree.c @@ -1008,6 +1008,9 @@ static struct btree *mca_alloc(struct cache_set *c, struct btree_op *op, * * The btree node will have either a read or a write lock held, depending on * level and op->lock. + * + * Note: Only error code or btree pointer will be returned, it is unncessary + * for callers to check NULL pointer. */ struct btree *bch_btree_node_get(struct cache_set *c, struct btree_op *op, struct bkey *k, int level, bool write, @@ -1120,6 +1123,10 @@ static void btree_node_free(struct btree *b) mutex_unlock(&b->c->bucket_lock); }
+/* + * Only error code or btree pointer will be returned, it is unncessary for + * callers to check NULL pointer. + */ struct btree *__bch_btree_node_alloc(struct cache_set *c, struct btree_op *op, int level, bool wait, struct btree *parent)
From: Coly Li colyli@suse.de
[ Upstream commit 3eba5e0b2422aec3c9e79822029599961fdcab97 ]
In run_cache_set() after c->root returned from bch_btree_node_get(), it is checked by IS_ERR_OR_NULL(). Indeed it is unncessary to check NULL because bch_btree_node_get() will not return NULL pointer to caller.
This patch replaces IS_ERR_OR_NULL() by IS_ERR() for the above reason.
Signed-off-by: Coly Li colyli@suse.de Link: https://lore.kernel.org/r/20231120052503.6122-11-colyli@suse.de Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/md/bcache/super.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/md/bcache/super.c b/drivers/md/bcache/super.c index 8b4a2bd6b57c9..70f0f3096beea 100644 --- a/drivers/md/bcache/super.c +++ b/drivers/md/bcache/super.c @@ -1846,7 +1846,7 @@ static int run_cache_set(struct cache_set *c) c->root = bch_btree_node_get(c, NULL, k, j->btree_level, true, NULL); - if (IS_ERR_OR_NULL(c->root)) + if (IS_ERR(c->root)) goto err;
list_del_init(&c->root->list);
From: Andy Shevchenko andriy.shevchenko@linux.intel.com
[ Upstream commit a6584711e64d9d12ab79a450ec3628fd35e4f476 ]
LKP found issues with a kernel doc in the driver:
core.c:116: warning: Function parameter or member 'ioss_evtconfig' not described in 'telemetry_update_events' core.c:188: warning: Function parameter or member 'ioss_evtconfig' not described in 'telemetry_get_eventconfig'
It looks like it were copy'n'paste typos when these descriptions had been introduced. Fix the typos.
Reported-by: kernel test robot lkp@intel.com Closes: https://lore.kernel.org/oe-kbuild-all/202310070743.WALmRGSY-lkp@intel.com/ Signed-off-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Link: https://lore.kernel.org/r/20231120150756.1661425-1-andriy.shevchenko@linux.i... Reviewed-by: Rajneesh Bhardwaj irenic.rajneesh@gmail.com Reviewed-by: Ilpo Järvinen ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen ilpo.jarvinen@linux.intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/intel_telemetry_core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/platform/x86/intel_telemetry_core.c b/drivers/platform/x86/intel_telemetry_core.c index f378621b5fe9d..31bbfb5d24631 100644 --- a/drivers/platform/x86/intel_telemetry_core.c +++ b/drivers/platform/x86/intel_telemetry_core.c @@ -110,7 +110,7 @@ static const struct telemetry_core_ops telm_defpltops = { /** * telemetry_update_events() - Update telemetry Configuration * @pss_evtconfig: PSS related config. No change if num_evts = 0. - * @pss_evtconfig: IOSS related config. No change if num_evts = 0. + * @ioss_evtconfig: IOSS related config. No change if num_evts = 0. * * This API updates the IOSS & PSS Telemetry configuration. Old config * is overwritten. Call telemetry_reset_events when logging is over @@ -184,7 +184,7 @@ EXPORT_SYMBOL_GPL(telemetry_reset_events); /** * telemetry_get_eventconfig() - Returns the pss and ioss events enabled * @pss_evtconfig: Pointer to PSS related configuration. - * @pss_evtconfig: Pointer to IOSS related configuration. + * @ioss_evtconfig: Pointer to IOSS related configuration. * @pss_len: Number of u32 elements allocated for pss_evtconfig array * @ioss_len: Number of u32 elements allocated for ioss_evtconfig array *
From: Oliver Neukum oneukum@suse.com
[ Upstream commit c55092187d9ad7b2f8f5a8645286fa03997d442f ]
These devices disconnect if suspended without remote wakeup. They can operate with the standard driver.
Signed-off-by: Oliver Neukum oneukum@suse.com Signed-off-by: Jiri Kosina jkosina@suse.cz Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hid/hid-quirks.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/hid/hid-quirks.c b/drivers/hid/hid-quirks.c index a2ab338166e61..f496bd7f8a726 100644 --- a/drivers/hid/hid-quirks.c +++ b/drivers/hid/hid-quirks.c @@ -35,6 +35,7 @@ static const struct hid_device_id hid_quirks[] = { { HID_USB_DEVICE(USB_VENDOR_ID_AKAI, USB_DEVICE_ID_AKAI_MPKMINI2), HID_QUIRK_NO_INIT_REPORTS }, { HID_USB_DEVICE(USB_VENDOR_ID_ALPS, USB_DEVICE_ID_IBM_GAMEPAD), HID_QUIRK_BADPAD }, { HID_USB_DEVICE(USB_VENDOR_ID_AMI, USB_DEVICE_ID_AMI_VIRT_KEYBOARD_AND_MOUSE), HID_QUIRK_ALWAYS_POLL }, + { HID_USB_DEVICE(USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_REVB_ANSI), HID_QUIRK_ALWAYS_POLL }, { HID_USB_DEVICE(USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_2PORTKVM), HID_QUIRK_NOGET }, { HID_USB_DEVICE(USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVMC), HID_QUIRK_NOGET }, { HID_USB_DEVICE(USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVM), HID_QUIRK_NOGET },
From: Denis Benato benato.denis96@gmail.com
[ Upstream commit 546edbd26cff7ae990e480a59150e801a06f77b1 ]
Some devices managed by this driver automatically set brightness to 0 before entering a suspended state and reset it back to a default brightness level after the resume: this has the effect of having the kernel report wrong brightness status after a sleep, and on some devices (like the Asus RC71L) that brightness is the intensity of LEDs directly facing the user.
Fix the above issue by setting back brightness to the level it had before entering a sleep state.
Signed-off-by: Denis Benato benato.denis96@gmail.com Signed-off-by: Luke D. Jones luke@ljones.dev Signed-off-by: Jiri Kosina jkosina@suse.cz Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hid/hid-asus.c | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+)
diff --git a/drivers/hid/hid-asus.c b/drivers/hid/hid-asus.c index 4dddf3ce32d73..12ad6493be8f4 100644 --- a/drivers/hid/hid-asus.c +++ b/drivers/hid/hid-asus.c @@ -614,6 +614,24 @@ static int asus_start_multitouch(struct hid_device *hdev) return 0; }
+static int __maybe_unused asus_resume(struct hid_device *hdev) { + struct asus_drvdata *drvdata = hid_get_drvdata(hdev); + int ret = 0; + + if (drvdata->kbd_backlight) { + const u8 buf[] = { FEATURE_KBD_REPORT_ID, 0xba, 0xc5, 0xc4, + drvdata->kbd_backlight->cdev.brightness }; + ret = asus_kbd_set_report(hdev, buf, sizeof(buf)); + if (ret < 0) { + hid_err(hdev, "Asus failed to set keyboard backlight: %d\n", ret); + goto asus_resume_err; + } + } + +asus_resume_err: + return ret; +} + static int __maybe_unused asus_reset_resume(struct hid_device *hdev) { struct asus_drvdata *drvdata = hid_get_drvdata(hdev); @@ -831,6 +849,7 @@ static struct hid_driver asus_driver = { .input_configured = asus_input_configured, #ifdef CONFIG_PM .reset_resume = asus_reset_resume, + .resume = asus_resume, #endif .raw_event = asus_raw_event };
From: Aoba K nexp_0x17@outlook.com
[ Upstream commit 9ffccb691adb854e7b7f3ee57fbbda12ff70533f ]
Honor MagicBook 13 2023 has a touchpad which do not switch to the multitouch mode until the input mode feature is written by the host. The touchpad do report the input mode at touchpad(3), while itself working under mouse mode. As a workaround, it is possible to call MT_QUIRE_FORCE_GET_FEATURE to force set feature in mt_set_input_mode for such device.
The touchpad reports as BLTP7853, which cannot retrive any useful manufacture information on the internel by this string at present. As the serial number of the laptop is GLO-G52, while DMI info reports the laptop serial number as GLO-GXXX, this workaround should applied to all models which has the GLO-GXXX.
Signed-off-by: Aoba K nexp_0x17@outlook.com Signed-off-by: Jiri Kosina jkosina@suse.cz Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hid/hid-multitouch.c | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c index 6411ee12c7a30..14dc5ec9edc69 100644 --- a/drivers/hid/hid-multitouch.c +++ b/drivers/hid/hid-multitouch.c @@ -1981,6 +1981,11 @@ static const struct hid_device_id mt_devices[] = { MT_USB_DEVICE(USB_VENDOR_ID_HANVON_ALT, USB_DEVICE_ID_HANVON_ALT_MULTITOUCH) },
+ /* HONOR GLO-GXXX panel */ + { .driver_data = MT_CLS_VTL, + HID_DEVICE(BUS_I2C, HID_GROUP_MULTITOUCH_WIN_8, + 0x347d, 0x7853) }, + /* Ilitek dual touch panel */ { .driver_data = MT_CLS_NSMU, MT_USB_DEVICE(USB_VENDOR_ID_ILITEK,
From: Linus Torvalds torvalds@linux-foundation.org
[ Upstream commit 125b0bb95dd6bec81b806b997a4ccb026eeecf8f ]
We really don't want to do atomic_read() or anything like that, since we already have the value, not the lock. The whole point of this is that we've loaded the lock from memory, and we want to check whether the value we loaded was a locked one or not.
The main use of this is the lockref code, which loads both the lock and the reference count in one atomic operation, and then works on that combined value. With the atomic_read(), the compiler would pointlessly spill the value to the stack, in order to then be able to read it back "atomically".
This is the qspinlock version of commit c6f4a9002252 ("asm-generic: ticket-lock: Optimize arch_spin_value_unlocked()") which fixed this same bug for ticket locks.
Cc: Guo Ren guoren@kernel.org Cc: Ingo Molnar mingo@kernel.org Cc: Waiman Long longman@redhat.com Link: https://lore.kernel.org/all/CAHk-=whNRv0v6kQiV5QO6DJhjH4KEL36vWQ6Re8Csrnh4zb... Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/asm-generic/qspinlock.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/asm-generic/qspinlock.h b/include/asm-generic/qspinlock.h index 9cc457597ddf8..1a688e5b8b0b5 100644 --- a/include/asm-generic/qspinlock.h +++ b/include/asm-generic/qspinlock.h @@ -47,7 +47,7 @@ static __always_inline int queued_spin_is_locked(struct qspinlock *lock) */ static __always_inline int queued_spin_value_unlocked(struct qspinlock lock) { - return !atomic_read(&lock.val); + return !lock.val.counter; }
/**
From: Lech Perczak lech.perczak@gmail.com
[ Upstream commit 99360d9620f09fb8bc15548d855011bbb198c680 ]
Interface 4 is used by for QMI interface in stock firmware of MF28D, the router which uses MF290 modem. Rebind it to qmi_wwan after freeing it up from option driver. The proper configuration is:
Interface mapping is: 0: QCDM, 1: (unknown), 2: AT (PCUI), 2: AT (Modem), 4: QMI
T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=19d2 ProdID=0189 Rev= 0.00 S: Manufacturer=ZTE, Incorporated S: Product=ZTE LTE Technologies MSM C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms
Cc: Bjørn Mork bjorn@mork.no Signed-off-by: Lech Perczak lech.perczak@gmail.com Link: https://lore.kernel.org/r/20231117231918.100278-3-lech.perczak@gmail.com Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index aefa57e726954..f787b9a4f9a9e 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -1250,6 +1250,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x19d2, 0x0168, 4)}, {QMI_FIXED_INTF(0x19d2, 0x0176, 3)}, {QMI_FIXED_INTF(0x19d2, 0x0178, 3)}, + {QMI_FIXED_INTF(0x19d2, 0x0189, 4)}, /* ZTE MF290 */ {QMI_FIXED_INTF(0x19d2, 0x0191, 4)}, /* ZTE EuFi890 */ {QMI_FIXED_INTF(0x19d2, 0x0199, 1)}, /* ZTE MF820S */ {QMI_FIXED_INTF(0x19d2, 0x0200, 1)},
linux-stable-mirror@lists.linaro.org
-
Sasha Levin