Hi all,
I worked on adding PTP support for the KSZ8463. While doing so, I ran into a few bugs in the resource release process that occur when things go wrong arount IRQ initialization.
This small series fixes those bugs.
The next series, which will add the PTP support, depend on this one.
Signed-off-by: Bastien Curutchet (Schneider Electric) bastien.curutchet@bootlin.com --- Changes in v6: - PATCH 4: Jump in the middle of the release loop instead of partially freeing resource before jumping at the beginning of the release loop. - PATCH 5: Add Andrew's Reviewed-By. - Link to v5: https://lore.kernel.org/r/20251118-ksz-fix-v5-0-8e9c7f56618d@bootlin.com
Changes in v5: - All: Add Cc Tag. - PATCH 3: Use dsa_switch_for_each_user_port_continue_reverse() to only iterate over initialized ports. - PATCH 4: Also clean PTP IRQs on port initialization failures - Link to v4: https://lore.kernel.org/r/20251117-ksz-fix-v4-0-13e1da58a492@bootlin.com
Changes in v4: - PATCH 1 & 2: Add Andrew's Reviewed-By. - PATCH 3: Ensure ksz_irq is initialized outside of ksz_irq_free() - Add PATCH 4 - PATCH 5: Fix symetry issues in ksz_ptp_msg_irq_{setup/free}() - Link to v3: https://lore.kernel.org/r/20251114-ksz-fix-v3-0-acbb3b9cc32f@bootlin.com
Changes in v3: - PATCH 1 and 3: Fix Fixes tags - PATCH 3: Move the irq_dispose_mapping() behind the check that verifies that the domain is initialized - Link to v2: https://lore.kernel.org/r/20251106-ksz-fix-v2-0-07188f608873@bootlin.com
Changes in v2: - Add Fixes tag. - Split PATCH 1 in two patches as it needed two different Fixes tags - Add details in commit logs - Link to v1: https://lore.kernel.org/r/20251031-ksz-fix-v1-0-7e46de999ed1@bootlin.com
--- Bastien Curutchet (Schneider Electric) (5): net: dsa: microchip: common: Fix checks on irq_find_mapping() net: dsa: microchip: ptp: Fix checks on irq_find_mapping() net: dsa: microchip: Don't free uninitialized ksz_irq net: dsa: microchip: Free previously initialized ports on init failures net: dsa: microchip: Fix symetry in ksz_ptp_msg_irq_{setup/free}()
drivers/net/dsa/microchip/ksz_common.c | 31 +++++++++++++++---------------- drivers/net/dsa/microchip/ksz_ptp.c | 22 +++++++++------------- 2 files changed, 24 insertions(+), 29 deletions(-) --- base-commit: 09652e543e809c2369dca142fee5d9b05be9bdc7 change-id: 20251031-ksz-fix-db345df7635f
Best regards,
irq_find_mapping() returns a positive IRQ number or 0 if no IRQ is found but it never returns a negative value. However, on each irq_find_mapping() call, we verify that the returned value isn't negative.
Fix the irq_find_mapping() checks to enter error paths when 0 is returned. Return -EINVAL in such cases.
CC: stable@vger.kernel.org Fixes: c9cd961c0d43 ("net: dsa: microchip: lan937x: add interrupt support for port phy link") Reviewed-by: Andrew Lunn andrew@lunn.ch Signed-off-by: Bastien Curutchet (Schneider Electric) bastien.curutchet@bootlin.com --- drivers/net/dsa/microchip/ksz_common.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c index 98cfb42b7257b8e3b4b5cce4bbf97def64537370..b17d29dda612ce00ce2e52fbe16c54bd6516c417 100644 --- a/drivers/net/dsa/microchip/ksz_common.c +++ b/drivers/net/dsa/microchip/ksz_common.c @@ -2585,8 +2585,8 @@ static int ksz_irq_phy_setup(struct ksz_device *dev)
irq = irq_find_mapping(dev->ports[port].pirq.domain, PORT_SRC_PHY_INT); - if (irq < 0) { - ret = irq; + if (!irq) { + ret = -EINVAL; goto out; } ds->user_mii_bus->irq[phy] = irq; @@ -2950,8 +2950,8 @@ static int ksz_pirq_setup(struct ksz_device *dev, u8 p) snprintf(pirq->name, sizeof(pirq->name), "port_irq-%d", p);
pirq->irq_num = irq_find_mapping(dev->girq.domain, p); - if (pirq->irq_num < 0) - return pirq->irq_num; + if (!pirq->irq_num) + return -EINVAL;
return ksz_irq_common_setup(dev, pirq); }
irq_find_mapping() returns a positive IRQ number or 0 if no IRQ is found but it never returns a negative value. However, during the PTP IRQ setup, we verify that its returned value isn't negative.
Fix the irq_find_mapping() check to enter the error path when 0 is returned. Return -EINVAL in such case.
Cc: stable@vger.kernel.org Fixes: cc13ab18b201 ("net: dsa: microchip: ptp: enable interrupt for timestamping") Reviewed-by: Andrew Lunn andrew@lunn.ch Signed-off-by: Bastien Curutchet (Schneider Electric) bastien.curutchet@bootlin.com --- drivers/net/dsa/microchip/ksz_ptp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/dsa/microchip/ksz_ptp.c b/drivers/net/dsa/microchip/ksz_ptp.c index 35fc21b1ee48a47daa278573bfe8749c7b42c731..c8bfbe5e2157323ecf29149d1907b77e689aa221 100644 --- a/drivers/net/dsa/microchip/ksz_ptp.c +++ b/drivers/net/dsa/microchip/ksz_ptp.c @@ -1139,8 +1139,8 @@ int ksz_ptp_irq_setup(struct dsa_switch *ds, u8 p) irq_create_mapping(ptpirq->domain, irq);
ptpirq->irq_num = irq_find_mapping(port->pirq.domain, PORT_SRC_PTP_INT); - if (ptpirq->irq_num < 0) { - ret = ptpirq->irq_num; + if (!ptpirq->irq_num) { + ret = -EINVAL; goto out; }
If something goes wrong at setup, ksz_irq_free() can be called on uninitialized ksz_irq (for example when ksz_ptp_irq_setup() fails). It leads to freeing uninitialized IRQ numbers and/or domains.
Use dsa_switch_for_each_user_port_continue_reverse() in the error path to iterate only over the fully initialized ports.
Cc: stable@vger.kernel.org Fixes: cc13ab18b201 ("net: dsa: microchip: ptp: enable interrupt for timestamping") Signed-off-by: Bastien Curutchet (Schneider Electric) bastien.curutchet@bootlin.com --- drivers/net/dsa/microchip/ksz_common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c index b17d29dda612ce00ce2e52fbe16c54bd6516c417..49827ac770e6fcc9e4a1a11e8814cdd90b17473e 100644 --- a/drivers/net/dsa/microchip/ksz_common.c +++ b/drivers/net/dsa/microchip/ksz_common.c @@ -3080,7 +3080,7 @@ static int ksz_setup(struct dsa_switch *ds) ksz_ptp_irq_free(ds, dp->index); out_pirq: if (dev->irq > 0) - dsa_switch_for_each_user_port(dp, dev->ds) + dsa_switch_for_each_user_port_continue_reverse(dp, dev->ds) ksz_irq_free(&dev->ports[dp->index].pirq); out_girq: if (dev->irq > 0)
If a port interrupt setup fails after at least one port has already been successfully initialized, the gotos miss some resource releasing: - the already initialized PTP IRQs aren't released - the already initialized port IRQs aren't released if the failure occurs in ksz_pirq_setup().
Merge 'out_girq' and 'out_ptpirq' into a single 'port_release' label. Behind this label, use the reverse loop to release all IRQ resources for all initialized ports. Jump in the middle of the reverse loop if an error occurs in ksz_ptp_irq_setup() to only release the port IRQ of the current iteration.
Cc: stable@vger.kernel.org Fixes: c9cd961c0d43 ("net: dsa: microchip: lan937x: add interrupt support for port phy link") Signed-off-by: Bastien Curutchet (Schneider Electric) bastien.curutchet@bootlin.com --- drivers/net/dsa/microchip/ksz_common.c | 23 +++++++++++------------ 1 file changed, 11 insertions(+), 12 deletions(-)
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c index 49827ac770e6fcc9e4a1a11e8814cdd90b17473e..96f37b8e72d160aeb265ef9c4d49f81d1c23abd9 100644 --- a/drivers/net/dsa/microchip/ksz_common.c +++ b/drivers/net/dsa/microchip/ksz_common.c @@ -3036,12 +3036,12 @@ static int ksz_setup(struct dsa_switch *ds) dsa_switch_for_each_user_port(dp, dev->ds) { ret = ksz_pirq_setup(dev, dp->index); if (ret) - goto out_girq; + goto port_release;
if (dev->info->ptp_capable) { ret = ksz_ptp_irq_setup(ds, dp->index); if (ret) - goto out_pirq; + goto pirq_release; } } } @@ -3051,7 +3051,7 @@ static int ksz_setup(struct dsa_switch *ds) if (ret) { dev_err(dev->dev, "Failed to register PTP clock: %d\n", ret); - goto out_ptpirq; + goto port_release; } }
@@ -3074,17 +3074,16 @@ static int ksz_setup(struct dsa_switch *ds) out_ptp_clock_unregister: if (dev->info->ptp_capable) ksz_ptp_clock_unregister(ds); -out_ptpirq: - if (dev->irq > 0 && dev->info->ptp_capable) - dsa_switch_for_each_user_port(dp, dev->ds) - ksz_ptp_irq_free(ds, dp->index); -out_pirq: - if (dev->irq > 0) - dsa_switch_for_each_user_port_continue_reverse(dp, dev->ds) +port_release: + if (dev->irq > 0) { + dsa_switch_for_each_user_port_continue_reverse(dp, dev->ds) { + if (dev->info->ptp_capable) + ksz_ptp_irq_free(ds, dp->index); +pirq_release: ksz_irq_free(&dev->ports[dp->index].pirq); -out_girq: - if (dev->irq > 0) + } ksz_irq_free(&dev->girq); + }
return ret; }
The IRQ numbers created through irq_create_mapping() are only assigned to ptpmsg_irq[n].num at the end of the IRQ setup. So if an error occurs between their creation and their assignment (for instance during the request_threaded_irq() step), we enter the error path and fail to release the newly created virtual IRQs because they aren't yet assigned to ptpmsg_irq[n].num.
Move the mapping creation to ksz_ptp_msg_irq_setup() to ensure symetry with what's released by ksz_ptp_msg_irq_free(). In the error path, move the irq_dispose_mapping to the out_ptp_msg label so it will be called only on created IRQs.
Cc: stable@vger.kernel.org Fixes: cc13ab18b201 ("net: dsa: microchip: ptp: enable interrupt for timestamping") Reviewed-by: Andrew Lunn andrew@lunn.ch Signed-off-by: Bastien Curutchet (Schneider Electric) bastien.curutchet@bootlin.com --- drivers/net/dsa/microchip/ksz_ptp.c | 18 +++++++----------- 1 file changed, 7 insertions(+), 11 deletions(-)
diff --git a/drivers/net/dsa/microchip/ksz_ptp.c b/drivers/net/dsa/microchip/ksz_ptp.c index c8bfbe5e2157323ecf29149d1907b77e689aa221..997e4a76d0a68448b0ebc76169150687bbc79673 100644 --- a/drivers/net/dsa/microchip/ksz_ptp.c +++ b/drivers/net/dsa/microchip/ksz_ptp.c @@ -1093,19 +1093,19 @@ static int ksz_ptp_msg_irq_setup(struct ksz_port *port, u8 n) static const char * const name[] = {"pdresp-msg", "xdreq-msg", "sync-msg"}; const struct ksz_dev_ops *ops = port->ksz_dev->dev_ops; + struct ksz_irq *ptpirq = &port->ptpirq; struct ksz_ptp_irq *ptpmsg_irq;
ptpmsg_irq = &port->ptpmsg_irq[n]; + ptpmsg_irq->num = irq_create_mapping(ptpirq->domain, n); + if (!ptpmsg_irq->num) + return -EINVAL;
ptpmsg_irq->port = port; ptpmsg_irq->ts_reg = ops->get_port_addr(port->num, ts_reg[n]);
strscpy(ptpmsg_irq->name, name[n]);
- ptpmsg_irq->num = irq_find_mapping(port->ptpirq.domain, n); - if (ptpmsg_irq->num < 0) - return ptpmsg_irq->num; - return request_threaded_irq(ptpmsg_irq->num, NULL, ksz_ptp_msg_thread_fn, IRQF_ONESHOT, ptpmsg_irq->name, ptpmsg_irq); @@ -1135,9 +1135,6 @@ int ksz_ptp_irq_setup(struct dsa_switch *ds, u8 p) if (!ptpirq->domain) return -ENOMEM;
- for (irq = 0; irq < ptpirq->nirqs; irq++) - irq_create_mapping(ptpirq->domain, irq); - ptpirq->irq_num = irq_find_mapping(port->pirq.domain, PORT_SRC_PTP_INT); if (!ptpirq->irq_num) { ret = -EINVAL; @@ -1159,12 +1156,11 @@ int ksz_ptp_irq_setup(struct dsa_switch *ds, u8 p)
out_ptp_msg: free_irq(ptpirq->irq_num, ptpirq); - while (irq--) + while (irq--) { free_irq(port->ptpmsg_irq[irq].num, &port->ptpmsg_irq[irq]); -out: - for (irq = 0; irq < ptpirq->nirqs; irq++) irq_dispose_mapping(port->ptpmsg_irq[irq].num); - + } +out: irq_domain_remove(ptpirq->domain);
return ret;
Hello:
This series was applied to netdev/net.git (main) by Paolo Abeni pabeni@redhat.com:
On Thu, 20 Nov 2025 10:11:59 +0100 you wrote:
Hi all,
I worked on adding PTP support for the KSZ8463. While doing so, I ran into a few bugs in the resource release process that occur when things go wrong arount IRQ initialization.
This small series fixes those bugs.
[...]
Here is the summary with links: - [net,v6,1/5] net: dsa: microchip: common: Fix checks on irq_find_mapping() https://git.kernel.org/netdev/net/c/7b3c09e16679 - [net,v6,2/5] net: dsa: microchip: ptp: Fix checks on irq_find_mapping() https://git.kernel.org/netdev/net/c/9e059305be41 - [net,v6,3/5] net: dsa: microchip: Don't free uninitialized ksz_irq https://git.kernel.org/netdev/net/c/25b62cc5b22c - [net,v6,4/5] net: dsa: microchip: Free previously initialized ports on init failures https://git.kernel.org/netdev/net/c/0f80e21bf622 - [net,v6,5/5] net: dsa: microchip: Fix symetry in ksz_ptp_msg_irq_{setup/free}() https://git.kernel.org/netdev/net/c/d0b8fec8ae50
You are awesome, thank you!
linux-stable-mirror@lists.linaro.org
-
Bastien Curutchet (Schneider Electric) -
patchwork-bot+netdevbpf＠kernel.org