[ Upstream commit 1b290ef023b3eeb4f4688b582fecb773915ef937 ]
Add alternative topology binary file name based on used machine driver and fallback to use this name after failed attempt to load topology file with name based on NHLT. This change addresses multiple issues with current mechanism, for example - there are devices without NHLT table, and that currently results in tplg_name being empty.
Signed-off-by: Mateusz Gorski mateusz.gorski@linux.intel.com Reviewed-by: Cezary Rojewski cezary.rojewski@intel.com Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20200427132727.24942-2-mateusz.gorski@linux.intel.... Signed-off-by: Mark Brown broonie@kernel.org ---
This functionality is merged on upstream kernel and widely used. Merging it to LTS kernel would improve the user experience and resolve some of the problems regarding topology naming that the users are facing.
sound/soc/intel/skylake/skl-topology.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-)
diff --git a/sound/soc/intel/skylake/skl-topology.c b/sound/soc/intel/skylake/skl-topology.c index 69cd7a81bf2a..4b114ece58c6 100644 --- a/sound/soc/intel/skylake/skl-topology.c +++ b/sound/soc/intel/skylake/skl-topology.c @@ -14,6 +14,7 @@ #include <linux/uuid.h> #include <sound/intel-nhlt.h> #include <sound/soc.h> +#include <sound/soc-acpi.h> #include <sound/soc-topology.h> #include <uapi/sound/snd_sst_tokens.h> #include <uapi/sound/skl-tplg-interface.h> @@ -3565,8 +3566,20 @@ int skl_tplg_init(struct snd_soc_component *component, struct hdac_bus *bus)
ret = request_firmware(&fw, skl->tplg_name, bus->dev); if (ret < 0) { - dev_info(bus->dev, "tplg fw %s load failed with %d, falling back to dfw_sst.bin", - skl->tplg_name, ret); + char alt_tplg_name[64]; + + snprintf(alt_tplg_name, sizeof(alt_tplg_name), "%s-tplg.bin", + skl->mach->drv_name); + dev_info(bus->dev, "tplg fw %s load failed with %d, trying alternative tplg name %s", + skl->tplg_name, ret, alt_tplg_name); + + ret = request_firmware(&fw, alt_tplg_name, bus->dev); + if (!ret) + goto component_load; + + dev_info(bus->dev, "tplg %s failed with %d, falling back to dfw_sst.bin", + alt_tplg_name, ret); + ret = request_firmware(&fw, "dfw_sst.bin", bus->dev); if (ret < 0) { dev_err(bus->dev, "Fallback tplg fw %s load failed with %d\n", @@ -3575,6 +3588,8 @@ int skl_tplg_init(struct snd_soc_component *component, struct hdac_bus *bus) } }
+component_load: + /* * The complete tplg for SKL is loaded as index 0, we don't use * any other index
On Tue, Nov 03, 2020 at 03:10:47PM +0100, Mateusz Gorski wrote:
[ Upstream commit 1b290ef023b3eeb4f4688b582fecb773915ef937 ]
Add alternative topology binary file name based on used machine driver and fallback to use this name after failed attempt to load topology file with name based on NHLT. This change addresses multiple issues with current mechanism, for example - there are devices without NHLT table, and that currently results in tplg_name being empty.
Signed-off-by: Mateusz Gorski mateusz.gorski@linux.intel.com Reviewed-by: Cezary Rojewski cezary.rojewski@intel.com Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20200427132727.24942-2-mateusz.gorski@linux.intel.... Signed-off-by: Mark Brown broonie@kernel.org
This functionality is merged on upstream kernel and widely used. Merging it to LTS kernel would improve the user experience and resolve some of the problems regarding topology naming that the users are facing.
What problems are people facing, and what kernel(s) are you asking for this to be ported to, and why can't people just use 5.8 or newer if they have this new hardware?
thanks,
greg k-h
[ Upstream commit 1b290ef023b3eeb4f4688b582fecb773915ef937 ]
Add alternative topology binary file name based on used machine driver and fallback to use this name after failed attempt to load topology file with name based on NHLT. This change addresses multiple issues with current mechanism, for example - there are devices without NHLT table, and that currently results in tplg_name being empty.
Signed-off-by: Mateusz Gorski mateusz.gorski@linux.intel.com Reviewed-by: Cezary Rojewski cezary.rojewski@intel.com Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20200427132727.24942-2-mateusz.gorski@linux.intel.... Signed-off-by: Mark Brown broonie@kernel.org
This functionality is merged on upstream kernel and widely used. Merging it to LTS kernel would improve the user experience and resolve some of the problems regarding topology naming that the users are facing.
What problems are people facing, and what kernel(s) are you asking for this to be ported to, and why can't people just use 5.8 or newer if they have this new hardware?
thanks,
greg k-h
I forgot to add - I wanted this change to be merged to stable 5.4 kernel. Please let me know if I should resend this patch with this information included.
As for the user issues - topology binary file name is currently created according to information from NHLT. The problem is, that some laptops (for example Dell XPS 13) do not have NHLT at all. This results in topology binary name being empty (" "). This patch adds alternative name based on loaded machine driver.
It applies not only to new hardware, please note that the mentioned Dell XPS 13 is based on Kabylake. This issue existed on upstream from the beginning of Skylake driver and was only recently addressed.
On Wed, Nov 04, 2020 at 12:46:36PM +0100, Gorski, Mateusz wrote:
[ Upstream commit 1b290ef023b3eeb4f4688b582fecb773915ef937 ]
Add alternative topology binary file name based on used machine driver and fallback to use this name after failed attempt to load topology file with name based on NHLT. This change addresses multiple issues with current mechanism, for example - there are devices without NHLT table, and that currently results in tplg_name being empty.
Signed-off-by: Mateusz Gorski mateusz.gorski@linux.intel.com Reviewed-by: Cezary Rojewski cezary.rojewski@intel.com Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20200427132727.24942-2-mateusz.gorski@linux.intel.... Signed-off-by: Mark Brown broonie@kernel.org
This functionality is merged on upstream kernel and widely used. Merging it to LTS kernel would improve the user experience and resolve some of the problems regarding topology naming that the users are facing.
What problems are people facing, and what kernel(s) are you asking for this to be ported to, and why can't people just use 5.8 or newer if they have this new hardware?
thanks,
greg k-h
I forgot to add - I wanted this change to be merged to stable 5.4 kernel. Please let me know if I should resend this patch with this information included.
As for the user issues - topology binary file name is currently created according to information from NHLT. The problem is, that some laptops (for example Dell XPS 13) do not have NHLT at all. This results in topology binary name being empty (" "). This patch adds alternative name based on loaded machine driver.
It applies not only to new hardware, please note that the mentioned Dell XPS 13 is based on Kabylake. This issue existed on upstream from the beginning of Skylake driver and was only recently addressed.
When was that laptop released and is this the only change that is needed in order for the 5.4.y kernel to work properly on it?
thanks,
greg k-h
On 2020-11-04 12:58 PM, Greg KH wrote:
On Wed, Nov 04, 2020 at 12:46:36PM +0100, Gorski, Mateusz wrote:
[ Upstream commit 1b290ef023b3eeb4f4688b582fecb773915ef937 ]
Add alternative topology binary file name based on used machine driver and fallback to use this name after failed attempt to load topology file with name based on NHLT. This change addresses multiple issues with current mechanism, for example - there are devices without NHLT table, and that currently results in tplg_name being empty.
...
What problems are people facing, and what kernel(s) are you asking for this to be ported to, and why can't people just use 5.8 or newer if they have this new hardware?
I forgot to add - I wanted this change to be merged to stable 5.4 kernel. Please let me know if I should resend this patch with this information included.
As for the user issues - topology binary file name is currently created according to information from NHLT. The problem is, that some laptops (for example Dell XPS 13) do not have NHLT at all. This results in topology binary name being empty (" "). This patch adds alternative name based on loaded machine driver.
It applies not only to new hardware, please note that the mentioned Dell XPS 13 is based on Kabylake. This issue existed on upstream from the beginning of Skylake driver and was only recently addressed.
When was that laptop released and is this the only change that is needed in order for the 5.4.y kernel to work properly on it?
Sorry for the late answer, Greg. To address your concerns and questions let me elaborate:
Indeed, this change is not the only one required to enable DMIC + HDA configuration for customers. The following series is essential:
[PATCH 0/7] ASoC: Intel: Skylake: Fix HDaudio and Dmic https://lore.kernel.org/alsa-devel/20200305145314.32579-1-cezary.rojewski@in...
as it's not just enabling said configuration, it is fixing several issues along the road with /skylake and HDA. And the issues are certainly not limited to just Dell XPS 13, these trouble many SKL/KBL/AML laptop models available on the market - those where AudioDSP configuration is enabled by default.
Backport presented in this very patch provided by Mateusz touches on yet another subject. More often than not, incomplete -or- incorrect topology binary is the cause of configuration issues and updating it usually resolves them. Unfortunately, user needed to be very precise when naming the new topology file. Name is quite complicated as it is based on data coming from NHLT's (ACPI table) header. Asking user to either provide their NHLT or decode the header themselves is inconvenient to say the least. And thus alternative-topology-name patch came to life.
I'll check what's missing on v5.4.y and get to porting mentioned series. Should happen early next week.
Thanks, Czarek
On Sun, Nov 08, 2020 at 04:17:16PM +0000, Rojewski, Cezary wrote:
On 2020-11-04 12:58 PM, Greg KH wrote:
On Wed, Nov 04, 2020 at 12:46:36PM +0100, Gorski, Mateusz wrote:
[ Upstream commit 1b290ef023b3eeb4f4688b582fecb773915ef937 ]
Add alternative topology binary file name based on used machine driver and fallback to use this name after failed attempt to load topology file with name based on NHLT. This change addresses multiple issues with current mechanism, for example - there are devices without NHLT table, and that currently results in tplg_name being empty.
...
What problems are people facing, and what kernel(s) are you asking for this to be ported to, and why can't people just use 5.8 or newer if they have this new hardware?
I forgot to add - I wanted this change to be merged to stable 5.4 kernel. Please let me know if I should resend this patch with this information included.
As for the user issues - topology binary file name is currently created according to information from NHLT. The problem is, that some laptops (for example Dell XPS 13) do not have NHLT at all. This results in topology binary name being empty (" "). This patch adds alternative name based on loaded machine driver.
It applies not only to new hardware, please note that the mentioned Dell XPS 13 is based on Kabylake. This issue existed on upstream from the beginning of Skylake driver and was only recently addressed.
When was that laptop released and is this the only change that is needed in order for the 5.4.y kernel to work properly on it?
Sorry for the late answer, Greg. To address your concerns and questions let me elaborate:
Indeed, this change is not the only one required to enable DMIC + HDA configuration for customers. The following series is essential:
[PATCH 0/7] ASoC: Intel: Skylake: Fix HDaudio and Dmic https://lore.kernel.org/alsa-devel/20200305145314.32579-1-cezary.rojewski@in...
Great, then they should just use a newer kernel version. It's crazy to think that you can go back in time and get older kernels working for newer hardware :)
thanks,
greg k-h
On 2020-11-08 6:00 PM, Greg KH wrote:
On Sun, Nov 08, 2020 at 04:17:16PM +0000, Rojewski, Cezary wrote:
On 2020-11-04 12:58 PM, Greg KH wrote:
On Wed, Nov 04, 2020 at 12:46:36PM +0100, Gorski, Mateusz wrote:
[ Upstream commit 1b290ef023b3eeb4f4688b582fecb773915ef937 ]
Add alternative topology binary file name based on used machine driver and fallback to use this name after failed attempt to load topology file with name based on NHLT. This change addresses multiple issues with current mechanism, for example - there are devices without NHLT table, and that currently results in tplg_name being empty.
...
What problems are people facing, and what kernel(s) are you asking for this to be ported to, and why can't people just use 5.8 or newer if they have this new hardware?
I forgot to add - I wanted this change to be merged to stable 5.4 kernel. Please let me know if I should resend this patch with this information included.
As for the user issues - topology binary file name is currently created according to information from NHLT. The problem is, that some laptops (for example Dell XPS 13) do not have NHLT at all. This results in topology binary name being empty (" "). This patch adds alternative name based on loaded machine driver.
It applies not only to new hardware, please note that the mentioned Dell XPS 13 is based on Kabylake. This issue existed on upstream from the beginning of Skylake driver and was only recently addressed.
When was that laptop released and is this the only change that is needed in order for the 5.4.y kernel to work properly on it?
Sorry for the late answer, Greg. To address your concerns and questions let me elaborate:
Indeed, this change is not the only one required to enable DMIC + HDA configuration for customers. The following series is essential:
[PATCH 0/7] ASoC: Intel: Skylake: Fix HDaudio and Dmic https://lore.kernel.org/alsa-devel/20200305145314.32579-1-cezary.rojewski@in...
Great, then they should just use a newer kernel version. It's crazy to think that you can go back in time and get older kernels working for newer hardware :)
Skylake and Kabylake-based platforms are few years old already, that's not exactly a "newer hardware". Icelake and such are and these are not part of /skylake driver. Fact is, this should all be part of 4.19 or earlier since DMIC + HDA configuration are available even there. And receiving laptop with such kernel and no patches fails miserably ; (
Unfortunately, kernels 4.19 and below need many more changes than "just" 6 fixes as HDA-generic soundcard isn't available there. That, however, can easily be called "a new feature" so stopping at 5.4 is a fair call.
Thanks, Czarek
linux-stable-mirror@lists.linaro.org
-
Gorski, Mateusz -
Greg KH -
Mateusz Gorski
-
Rojewski, Cezary