[PATCH AUTOSEL 4.19 01/18] ARM: 9058/1: cache-v7: refactor v7_invalidate_l1 to avoid clobbering r5/r6
From: Ard Biesheuvel ardb@kernel.org
[ Upstream commit f9e7a99fb6b86aa6a00e53b34ee6973840e005aa ]
The cache invalidation code in v7_invalidate_l1 can be tweaked to re-read the associativity from CCSIDR, and keep the way identifier component in a single register that is assigned in the outer loop. This way, we need 2 registers less.
Given that the number of sets is typically much larger than the associativity, rearrange the code so that the outer loop has the fewer number of iterations, ensuring that the re-read of CCSIDR only occurs a handful of times in practice.
Fix the whitespace while at it, and update the comment to indicate that this code is no longer a clone of anything else.
Acked-by: Nicolas Pitre nico@fluxnic.net Signed-off-by: Ard Biesheuvel ardb@kernel.org Signed-off-by: Russell King rmk+kernel@armlinux.org.uk Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/mm/cache-v7.S | 51 +++++++++++++++++++++--------------------- 1 file changed, 25 insertions(+), 26 deletions(-)
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index 2149b47a0c5a..463965dc7922 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -28,41 +28,40 @@ * processor. We fix this by performing an invalidate, rather than a * clean + invalidate, before jumping into the kernel. * - * This function is cloned from arch/arm/mach-tegra/headsmp.S, and needs - * to be called for both secondary cores startup and primary core resume - * procedures. + * This function needs to be called for both secondary cores startup and + * primary core resume procedures. */ ENTRY(v7_invalidate_l1) mov r0, #0 mcr p15, 2, r0, c0, c0, 0 mrc p15, 1, r0, c0, c0, 0
- movw r1, #0x7fff - and r2, r1, r0, lsr #13 + movw r3, #0x3ff + and r3, r3, r0, lsr #3 @ 'Associativity' in CCSIDR[12:3] + clz r1, r3 @ WayShift + mov r2, #1 + mov r3, r3, lsl r1 @ NumWays-1 shifted into bits [31:...] + movs r1, r2, lsl r1 @ #1 shifted left by same amount + moveq r1, #1 @ r1 needs value > 0 even if only 1 way
- movw r1, #0x3ff + and r2, r0, #0x7 + add r2, r2, #4 @ SetShift
- and r3, r1, r0, lsr #3 @ NumWays - 1 - add r2, r2, #1 @ NumSets +1: movw r4, #0x7fff + and r0, r4, r0, lsr #13 @ 'NumSets' in CCSIDR[27:13]
- and r0, r0, #0x7 - add r0, r0, #4 @ SetShift - - clz r1, r3 @ WayShift - add r4, r3, #1 @ NumWays -1: sub r2, r2, #1 @ NumSets-- - mov r3, r4 @ Temp = NumWays -2: subs r3, r3, #1 @ Temp-- - mov r5, r3, lsl r1 - mov r6, r2, lsl r0 - orr r5, r5, r6 @ Reg = (Temp<<WayShift)|(NumSets<<SetShift) - mcr p15, 0, r5, c7, c6, 2 - bgt 2b - cmp r2, #0 - bgt 1b - dsb st - isb - ret lr +2: mov r4, r0, lsl r2 @ NumSet << SetShift + orr r4, r4, r3 @ Reg = (Temp<<WayShift)|(NumSets<<SetShift) + mcr p15, 0, r4, c7, c6, 2 + subs r0, r0, #1 @ Set-- + bpl 2b + subs r3, r3, r1 @ Way-- + bcc 3f + mrc p15, 1, r0, c0, c0, 0 @ re-read cache geometry from CCSIDR + b 1b +3: dsb st + isb + ret lr ENDPROC(v7_invalidate_l1)
/*
From: Arnd Bergmann arnd@arndb.de
[ Upstream commit 16f7ae5906dfbeff54f74ec75d0563bb3a87ab0b ]
Compile-testing these drivers is currently broken. Enabling it causes a couple of build failures though:
drivers/pci/controller/pci-thunder-ecam.c:119:30: error: shift count >= width of type [-Werror,-Wshift-count-overflow] drivers/pci/controller/pci-thunder-pem.c:54:2: error: implicit declaration of function 'writeq' [-Werror,-Wimplicit-function-declaration] drivers/pci/controller/pci-thunder-pem.c:392:8: error: implicit declaration of function 'acpi_get_rc_resources' [-Werror,-Wimplicit-function-declaration]
Fix them with the obvious one-line changes.
Link: https://lore.kernel.org/r/20210308152501.2135937-2-arnd@kernel.org Signed-off-by: Arnd Bergmann arnd@arndb.de Signed-off-by: Bjorn Helgaas bhelgaas@google.com Reviewed-by: Kuppuswamy Sathyanarayanan sathyanarayanan.kuppuswamy@linux.intel.com Reviewed-by: Robert Richter rric@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/controller/pci-thunder-ecam.c | 2 +- drivers/pci/controller/pci-thunder-pem.c | 13 +++++++------ drivers/pci/pci.h | 6 ++++++ 3 files changed, 14 insertions(+), 7 deletions(-)
diff --git a/drivers/pci/controller/pci-thunder-ecam.c b/drivers/pci/controller/pci-thunder-ecam.c index 32d1d7b81ef4..18715d2ce022 100644 --- a/drivers/pci/controller/pci-thunder-ecam.c +++ b/drivers/pci/controller/pci-thunder-ecam.c @@ -116,7 +116,7 @@ static int thunder_ecam_p2_config_read(struct pci_bus *bus, unsigned int devfn, * the config space access window. Since we are working with * the high-order 32 bits, shift everything down by 32 bits. */ - node_bits = (cfg->res.start >> 32) & (1 << 12); + node_bits = upper_32_bits(cfg->res.start) & (1 << 12);
v |= node_bits; set_val(v, where, size, val); diff --git a/drivers/pci/controller/pci-thunder-pem.c b/drivers/pci/controller/pci-thunder-pem.c index f127ce8bd4ef..1650ec2c35f9 100644 --- a/drivers/pci/controller/pci-thunder-pem.c +++ b/drivers/pci/controller/pci-thunder-pem.c @@ -11,6 +11,7 @@ #include <linux/pci-acpi.h> #include <linux/pci-ecam.h> #include <linux/platform_device.h> +#include <linux/io-64-nonatomic-lo-hi.h> #include "../pci.h"
#if defined(CONFIG_PCI_HOST_THUNDER_PEM) || (defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS)) @@ -314,9 +315,9 @@ static int thunder_pem_init(struct device *dev, struct pci_config_window *cfg, * structure here for the BAR. */ bar4_start = res_pem->start + 0xf00000; - pem_pci->ea_entry[0] = (u32)bar4_start | 2; - pem_pci->ea_entry[1] = (u32)(res_pem->end - bar4_start) & ~3u; - pem_pci->ea_entry[2] = (u32)(bar4_start >> 32); + pem_pci->ea_entry[0] = lower_32_bits(bar4_start) | 2; + pem_pci->ea_entry[1] = lower_32_bits(res_pem->end - bar4_start) & ~3u; + pem_pci->ea_entry[2] = upper_32_bits(bar4_start);
cfg->priv = pem_pci; return 0; @@ -324,9 +325,9 @@ static int thunder_pem_init(struct device *dev, struct pci_config_window *cfg,
#if defined(CONFIG_ACPI) && defined(CONFIG_PCI_QUIRKS)
-#define PEM_RES_BASE 0x87e0c0000000UL -#define PEM_NODE_MASK GENMASK(45, 44) -#define PEM_INDX_MASK GENMASK(26, 24) +#define PEM_RES_BASE 0x87e0c0000000ULL +#define PEM_NODE_MASK GENMASK_ULL(45, 44) +#define PEM_INDX_MASK GENMASK_ULL(26, 24) #define PEM_MIN_DOM_IN_NODE 4 #define PEM_MAX_DOM_IN_NODE 10
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index e9ede82ee2c2..39725b71300f 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -473,6 +473,12 @@ static inline int pci_dev_specific_reset(struct pci_dev *dev, int probe) #if defined(CONFIG_PCI_QUIRKS) && defined(CONFIG_ARM64) int acpi_get_rc_resources(struct device *dev, const char *hid, u16 segment, struct resource *res); +#else +static inline int acpi_get_rc_resources(struct device *dev, const char *hid, + u16 segment, struct resource *res) +{ + return -ENODEV; +} #endif
u32 pci_rebar_get_possible_sizes(struct pci_dev *pdev, int bar);
From: "louis.wang" liang26812@gmail.com
[ Upstream commit 8252ca87c7a2111502ee13994956f8c309faad7f ]
Enabling function_graph tracer on ARM causes kernel panic, because the function graph tracer updates the "return address" of a function in order to insert a trace callback on function exit, it saves the function's original return address in a return trace stack, but cpu_suspend() may not return through the normal return path.
cpu_suspend() will resume directly via the cpu_resume path, but the return trace stack has been set-up by the subfunctions of cpu_suspend(), which makes the "return address" inconsistent with cpu_suspend().
This patch refers to Commit de818bd4522c40ea02a81b387d2fa86f989c9623 ("arm64: kernel: pause/unpause function graph tracer in cpu_suspend()"),
fixes the issue by pausing/resuming the function graph tracer on the thread executing cpu_suspend(), so that the function graph tracer state is kept consistent across functions that enter power down states and never return by effectively disabling graph tracer while they are executing.
Signed-off-by: louis.wang liang26812@gmail.com Signed-off-by: Russell King rmk+kernel@armlinux.org.uk Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/kernel/suspend.c | 19 ++++++++++++++++++- 1 file changed, 18 insertions(+), 1 deletion(-)
diff --git a/arch/arm/kernel/suspend.c b/arch/arm/kernel/suspend.c index d08099269e35..e126386fb78a 100644 --- a/arch/arm/kernel/suspend.c +++ b/arch/arm/kernel/suspend.c @@ -1,4 +1,5 @@ // SPDX-License-Identifier: GPL-2.0 +#include <linux/ftrace.h> #include <linux/init.h> #include <linux/slab.h> #include <linux/mm_types.h> @@ -26,6 +27,13 @@ int cpu_suspend(unsigned long arg, int (*fn)(unsigned long)) if (!idmap_pgd) return -EINVAL;
+ /* + * Function graph tracer state gets incosistent when the kernel + * calls functions that never return (aka suspend finishers) hence + * disable graph tracing during their execution. + */ + pause_graph_tracing(); + /* * Provide a temporary page table with an identity mapping for * the MMU-enable code, required for resuming. On successful @@ -33,6 +41,9 @@ int cpu_suspend(unsigned long arg, int (*fn)(unsigned long)) * back to the correct page tables. */ ret = __cpu_suspend(arg, fn, __mpidr); + + unpause_graph_tracing(); + if (ret == 0) { cpu_switch_mm(mm->pgd, mm); local_flush_bp_all(); @@ -46,7 +57,13 @@ int cpu_suspend(unsigned long arg, int (*fn)(unsigned long)) int cpu_suspend(unsigned long arg, int (*fn)(unsigned long)) { u32 __mpidr = cpu_logical_map(smp_processor_id()); - return __cpu_suspend(arg, fn, __mpidr); + int ret; + + pause_graph_tracing(); + ret = __cpu_suspend(arg, fn, __mpidr); + unpause_graph_tracing(); + + return ret; } #define idmap_pgd NULL #endif
From: Chao Yu yuchao0@huawei.com
[ Upstream commit b862676e371715456c9dade7990c8004996d0d9e ]
butt3rflyh4ck butterflyhuangxx@gmail.com reported a bug found by syzkaller fuzzer with custom modifications in 5.12.0-rc3+ [1]:
dump_stack+0xfa/0x151 lib/dump_stack.c:120 print_address_description.constprop.0.cold+0x82/0x32c mm/kasan/report.c:232 __kasan_report mm/kasan/report.c:399 [inline] kasan_report.cold+0x7c/0xd8 mm/kasan/report.c:416 f2fs_test_bit fs/f2fs/f2fs.h:2572 [inline] current_nat_addr fs/f2fs/node.h:213 [inline] get_next_nat_page fs/f2fs/node.c:123 [inline] __flush_nat_entry_set fs/f2fs/node.c:2888 [inline] f2fs_flush_nat_entries+0x258e/0x2960 fs/f2fs/node.c:2991 f2fs_write_checkpoint+0x1372/0x6a70 fs/f2fs/checkpoint.c:1640 f2fs_issue_checkpoint+0x149/0x410 fs/f2fs/checkpoint.c:1807 f2fs_sync_fs+0x20f/0x420 fs/f2fs/super.c:1454 __sync_filesystem fs/sync.c:39 [inline] sync_filesystem fs/sync.c:67 [inline] sync_filesystem+0x1b5/0x260 fs/sync.c:48 generic_shutdown_super+0x70/0x370 fs/super.c:448 kill_block_super+0x97/0xf0 fs/super.c:1394
The root cause is, if nat entry in checkpoint journal area is corrupted, e.g. nid of journalled nat entry exceeds max nid value, during checkpoint, once it tries to flush nat journal to NAT area, get_next_nat_page() may access out-of-bounds memory on nat_bitmap due to it uses wrong nid value as bitmap offset.
[1] https://lore.kernel.org/lkml/CAFcO6XOMWdr8pObek6eN6-fs58KG9doRFadgJj-FnF-1x4...
Reported-and-tested-by: butt3rflyh4ck butterflyhuangxx@gmail.com Signed-off-by: Chao Yu yuchao0@huawei.com Signed-off-by: Jaegeuk Kim jaegeuk@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/f2fs/node.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/fs/f2fs/node.c b/fs/f2fs/node.c index 1934dc6ad1cc..ff3f97ba1a55 100644 --- a/fs/f2fs/node.c +++ b/fs/f2fs/node.c @@ -2654,6 +2654,9 @@ static void remove_nats_in_journal(struct f2fs_sb_info *sbi) struct f2fs_nat_entry raw_ne; nid_t nid = le32_to_cpu(nid_in_journal(journal, i));
+ if (f2fs_check_nid_range(sbi, nid)) + continue; + raw_ne = nat_in_journal(journal, i);
ne = __lookup_nat_cache(nm_i, nid);
From: Feilong Lin linfeilong@huawei.com
[ Upstream commit 3bbfd319034ddce59e023837a4aa11439460509b ]
In enable_slot(), if pci_get_slot() returns NULL, we clear the SLOT_ENABLED flag. When pci_get_slot() finds a device, it increments the device's reference count. In this case, we did not call pci_dev_put() to decrement the reference count, so the memory of the device (struct pci_dev type) will eventually leak.
Call pci_dev_put() to decrement its reference count when pci_get_slot() returns a PCI device.
Link: https://lore.kernel.org/r/b411af88-5049-a1c6-83ac-d104a1f429be@huawei.com Signed-off-by: Feilong Lin linfeilong@huawei.com Signed-off-by: Zhiqiang Liu liuzhiqiang26@huawei.com Signed-off-by: Bjorn Helgaas bhelgaas@google.com Reviewed-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/hotplug/acpiphp_glue.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index be35bbfa6968..3d8844e7090a 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -540,6 +540,7 @@ static void enable_slot(struct acpiphp_slot *slot, bool bridge) slot->flags &= ~SLOT_ENABLED; continue; } + pci_dev_put(dev); } }
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit 65299e8bfb24774e6340e93ae49f6626598917c8 ]
Several users have been reporting that elants_i2c gives several errors during probe and that their touchscreen does not work on their Lenovo AMD based laptops with a touchscreen with a ELAN0001 ACPI hardware-id:
[ 0.550596] elants_i2c i2c-ELAN0001:00: i2c-ELAN0001:00 supply vcc33 not found, using dummy regulator [ 0.551836] elants_i2c i2c-ELAN0001:00: i2c-ELAN0001:00 supply vccio not found, using dummy regulator [ 0.560932] elants_i2c i2c-ELAN0001:00: elants_i2c_send failed (77 77 77 77): -121 [ 0.562427] elants_i2c i2c-ELAN0001:00: software reset failed: -121 [ 0.595925] elants_i2c i2c-ELAN0001:00: elants_i2c_send failed (77 77 77 77): -121 [ 0.597974] elants_i2c i2c-ELAN0001:00: software reset failed: -121 [ 0.621893] elants_i2c i2c-ELAN0001:00: elants_i2c_send failed (77 77 77 77): -121 [ 0.622504] elants_i2c i2c-ELAN0001:00: software reset failed: -121 [ 0.632650] elants_i2c i2c-ELAN0001:00: elants_i2c_send failed (4d 61 69 6e): -121 [ 0.634256] elants_i2c i2c-ELAN0001:00: boot failed: -121 [ 0.699212] elants_i2c i2c-ELAN0001:00: invalid 'hello' packet: 00 00 ff ff [ 1.630506] elants_i2c i2c-ELAN0001:00: Failed to read fw id: -121 [ 1.645508] elants_i2c i2c-ELAN0001:00: unknown packet 00 00 ff ff
Despite these errors, the elants_i2c driver stays bound to the device (it returns 0 from its probe method despite the errors), blocking the i2c-hid driver from binding.
Manually unbinding the elants_i2c driver and binding the i2c-hid driver makes the touchscreen work.
Check if the ACPI-fwnode for the touchscreen contains one of the i2c-hid compatiblity-id strings and if it has the I2C-HID spec's DSM to get the HID descriptor address, If it has both then make elants_i2c not bind, so that the i2c-hid driver can bind.
This assumes that non of the (older) elan touchscreens which actually need the elants_i2c driver falsely advertise an i2c-hid compatiblity-id + DSM in their ACPI-fwnodes. If some of them actually do have this false advertising, then this change may lead to regressions.
While at it also drop the unnecessary DEVICE_NAME prefixing of the "I2C check functionality error", dev_err already outputs the driver-name.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=207759 Acked-by: Benjamin Tissoires benjamin.tissoires@redhat.com Signed-off-by: Hans de Goede hdegoede@redhat.com Link: https://lore.kernel.org/r/20210405202756.16830-1-hdegoede@redhat.com
Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/input/touchscreen/elants_i2c.c | 44 ++++++++++++++++++++++++-- 1 file changed, 42 insertions(+), 2 deletions(-)
diff --git a/drivers/input/touchscreen/elants_i2c.c b/drivers/input/touchscreen/elants_i2c.c index d21ca39b0fdb..adfae2d88707 100644 --- a/drivers/input/touchscreen/elants_i2c.c +++ b/drivers/input/touchscreen/elants_i2c.c @@ -41,6 +41,7 @@ #include <linux/of.h> #include <linux/gpio/consumer.h> #include <linux/regulator/consumer.h> +#include <linux/uuid.h> #include <asm/unaligned.h>
/* Device, Driver information */ @@ -1131,6 +1132,40 @@ static void elants_i2c_power_off(void *_data) } }
+#ifdef CONFIG_ACPI +static const struct acpi_device_id i2c_hid_ids[] = { + {"ACPI0C50", 0 }, + {"PNP0C50", 0 }, + { }, +}; + +static const guid_t i2c_hid_guid = + GUID_INIT(0x3CDFF6F7, 0x4267, 0x4555, + 0xAD, 0x05, 0xB3, 0x0A, 0x3D, 0x89, 0x38, 0xDE); + +static bool elants_acpi_is_hid_device(struct device *dev) +{ + acpi_handle handle = ACPI_HANDLE(dev); + union acpi_object *obj; + + if (acpi_match_device_ids(ACPI_COMPANION(dev), i2c_hid_ids)) + return false; + + obj = acpi_evaluate_dsm_typed(handle, &i2c_hid_guid, 1, 1, NULL, ACPI_TYPE_INTEGER); + if (obj) { + ACPI_FREE(obj); + return true; + } + + return false; +} +#else +static bool elants_acpi_is_hid_device(struct device *dev) +{ + return false; +} +#endif + static int elants_i2c_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -1139,9 +1174,14 @@ static int elants_i2c_probe(struct i2c_client *client, unsigned long irqflags; int error;
+ /* Don't bind to i2c-hid compatible devices, these are handled by the i2c-hid drv. */ + if (elants_acpi_is_hid_device(&client->dev)) { + dev_warn(&client->dev, "This device appears to be an I2C-HID device, not binding\n"); + return -ENODEV; + } + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { - dev_err(&client->dev, - "%s: i2c check functionality error\n", DEVICE_NAME); + dev_err(&client->dev, "I2C check functionality error\n"); return -ENXIO; }
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit e479187748a8f151a85116a7091c599b121fdea5 ]
Some buggy BIOS-es bring up the touchscreen-controller in a stuck state where it blocks the I2C bus. Specifically this happens on the Jumper EZpad 7 tablet model.
After much poking at this problem I have found that the following steps are necessary to unstuck the chip / bus:
1. Turn off the Silead chip. 2. Try to do an I2C transfer with the chip, this will fail in response to which the I2C-bus-driver will call: i2c_recover_bus() which will unstuck the I2C-bus. Note the unstuck-ing of the I2C bus only works if we first drop the chip of the bus by turning it off. 3. Turn the chip back on.
On the x86/ACPI systems were this problem is seen, step 1. and 3. require making ACPI calls and dealing with ACPI Power Resources. This commit adds a workaround which runtime-suspends the chip to turn it off, leaving it up to the ACPI subsystem to deal with all the ACPI specific details.
There is no good way to detect this bug, so the workaround gets activated by a new "silead,stuck-controller-bug" boolean device-property. Since this is only used on x86/ACPI, this will be set by model specific device-props set by drivers/platform/x86/touchscreen_dmi.c. Therefor this new device-property is not documented in the DT-bindings.
Dmesg will contain the following messages on systems where the workaround is activated:
[ 54.309029] silead_ts i2c-MSSL1680:00: [Firmware Bug]: Stuck I2C bus: please ignore the next 'controller timed out' error [ 55.373593] i2c_designware 808622C1:04: controller timed out [ 55.582186] silead_ts i2c-MSSL1680:00: Silead chip ID: 0x80360000
Signed-off-by: Hans de Goede hdegoede@redhat.com Link: https://lore.kernel.org/r/20210405202745.16777-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/input/touchscreen/silead.c | 44 +++++++++++++++++++++++++++--- 1 file changed, 40 insertions(+), 4 deletions(-)
diff --git a/drivers/input/touchscreen/silead.c b/drivers/input/touchscreen/silead.c index 06f0eb04a8fd..a787a6aefc69 100644 --- a/drivers/input/touchscreen/silead.c +++ b/drivers/input/touchscreen/silead.c @@ -28,6 +28,7 @@ #include <linux/input/mt.h> #include <linux/input/touchscreen.h> #include <linux/pm.h> +#include <linux/pm_runtime.h> #include <linux/irq.h> #include <linux/regulator/consumer.h>
@@ -343,10 +344,8 @@ static int silead_ts_get_id(struct i2c_client *client)
error = i2c_smbus_read_i2c_block_data(client, SILEAD_REG_ID, sizeof(chip_id), (u8 *)&chip_id); - if (error < 0) { - dev_err(&client->dev, "Chip ID read error %d\n", error); + if (error < 0) return error; - }
data->chip_id = le32_to_cpu(chip_id); dev_info(&client->dev, "Silead chip ID: 0x%8X", data->chip_id); @@ -359,12 +358,49 @@ static int silead_ts_setup(struct i2c_client *client) int error; u32 status;
+ /* + * Some buggy BIOS-es bring up the chip in a stuck state where it + * blocks the I2C bus. The following steps are necessary to + * unstuck the chip / bus: + * 1. Turn off the Silead chip. + * 2. Try to do an I2C transfer with the chip, this will fail in + * response to which the I2C-bus-driver will call: + * i2c_recover_bus() which will unstuck the I2C-bus. Note the + * unstuck-ing of the I2C bus only works if we first drop the + * chip off the bus by turning it off. + * 3. Turn the chip back on. + * + * On the x86/ACPI systems were this problem is seen, step 1. and + * 3. require making ACPI calls and dealing with ACPI Power + * Resources. The workaround below runtime-suspends the chip to + * turn it off, leaving it up to the ACPI subsystem to deal with + * this. + */ + + if (device_property_read_bool(&client->dev, + "silead,stuck-controller-bug")) { + pm_runtime_set_active(&client->dev); + pm_runtime_enable(&client->dev); + pm_runtime_allow(&client->dev); + + pm_runtime_suspend(&client->dev); + + dev_warn(&client->dev, FW_BUG "Stuck I2C bus: please ignore the next 'controller timed out' error\n"); + silead_ts_get_id(client); + + /* The forbid will also resume the device */ + pm_runtime_forbid(&client->dev); + pm_runtime_disable(&client->dev); + } + silead_ts_set_power(client, SILEAD_POWER_OFF); silead_ts_set_power(client, SILEAD_POWER_ON);
error = silead_ts_get_id(client); - if (error) + if (error) { + dev_err(&client->dev, "Chip ID read error %d\n", error); return error; + }
error = silead_ts_init(client); if (error)
From: Johannes Berg johannes.berg@intel.com
[ Upstream commit d5027ca63e0e778b641cf23e3f5c6d6212cf412b ]
Ritesh reported a bug [1] against UML, noting that it crashed on startup. The backtrace shows the following (heavily redacted):
(gdb) bt ... #26 0x0000000060015b5d in sem_init () at ipc/sem.c:268 #27 0x00007f89906d92f7 in ?? () from /lib/x86_64-linux-gnu/libcom_err.so.2 #28 0x00007f8990ab8fb2 in call_init (...) at dl-init.c:72 ... #40 0x00007f89909bf3a6 in nss_load_library (...) at nsswitch.c:359 ... #44 0x00007f8990895e35 in _nss_compat_getgrnam_r (...) at nss_compat/compat-grp.c:486 #45 0x00007f8990968b85 in __getgrnam_r [...] #46 0x00007f89909d6b77 in grantpt [...] #47 0x00007f8990a9394e in __GI_openpty [...] #48 0x00000000604a1f65 in openpty_cb (...) at arch/um/os-Linux/sigio.c:407 #49 0x00000000604a58d0 in start_idle_thread (...) at arch/um/os-Linux/skas/process.c:598 #50 0x0000000060004a3d in start_uml () at arch/um/kernel/skas/process.c:45 #51 0x00000000600047b2 in linux_main (...) at arch/um/kernel/um_arch.c:334 #52 0x000000006000574f in main (...) at arch/um/os-Linux/main.c:144
indicating that the UML function openpty_cb() calls openpty(), which internally calls __getgrnam_r(), which causes the nsswitch machinery to get started.
This loads, through lots of indirection that I snipped, the libcom_err.so.2 library, which (in an unknown function, "??") calls sem_init().
Now, of course it wants to get libpthread's sem_init(), since it's linked against libpthread. However, the dynamic linker looks up that symbol against the binary first, and gets the kernel's sem_init().
Hajime Tazaki noted that "objcopy -L" can localize a symbol, so the dynamic linker wouldn't do the lookup this way. I tried, but for some reason that didn't seem to work.
Doing the same thing in the linker script instead does seem to work, though I cannot entirely explain - it *also* works if I just add "VERSION { { global: *; }; }" instead, indicating that something else is happening that I don't really understand. It may be that explicitly doing that marks them with some kind of empty version, and that's different from the default.
Explicitly marking them with a version breaks kallsyms, so that doesn't seem to be possible.
Marking all the symbols as local seems correct, and does seem to address the issue, so do that. Also do it for static link, nsswitch libraries could still be loaded there.
[1] https://bugs.debian.org/983379
Reported-by: Ritesh Raj Sarraf rrs@debian.org Signed-off-by: Johannes Berg johannes.berg@intel.com Acked-By: Anton Ivanov anton.ivanov@cambridgegreys.com Tested-By: Ritesh Raj Sarraf rrs@debian.org Signed-off-by: Richard Weinberger richard@nod.at Signed-off-by: Sasha Levin sashal@kernel.org --- arch/um/kernel/dyn.lds.S | 6 ++++++ arch/um/kernel/uml.lds.S | 6 ++++++ 2 files changed, 12 insertions(+)
diff --git a/arch/um/kernel/dyn.lds.S b/arch/um/kernel/dyn.lds.S index 5568cf882371..899233625467 100644 --- a/arch/um/kernel/dyn.lds.S +++ b/arch/um/kernel/dyn.lds.S @@ -6,6 +6,12 @@ OUTPUT_ARCH(ELF_ARCH) ENTRY(_start) jiffies = jiffies_64;
+VERSION { + { + local: *; + }; +} + SECTIONS { PROVIDE (__executable_start = START); diff --git a/arch/um/kernel/uml.lds.S b/arch/um/kernel/uml.lds.S index 36b07ec09742..22ff701d9b71 100644 --- a/arch/um/kernel/uml.lds.S +++ b/arch/um/kernel/uml.lds.S @@ -7,6 +7,12 @@ OUTPUT_ARCH(ELF_ARCH) ENTRY(_start) jiffies = jiffies_64;
+VERSION { + { + local: *; + }; +} + SECTIONS { /* This must contain the right address - not quite the default ELF one.*/
From: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org
[ Upstream commit 57ac51667d8cd62731223d687e5fe7b41c502f89 ]
On Qualcomm ARM32 platforms, the SMC call can return before it has completed. If this occurs, the call can be restarted, but it requires using the returned session ID value from the interrupted SMC call.
The ARM32 SMCC code already has the provision to add platform specific quirks for things like this. So let's make use of it and add the Qualcomm specific quirk (ARM_SMCCC_QUIRK_QCOM_A6) used by the QCOM_SCM driver.
This change is similar to the below one added for ARM64 a while ago: commit 82bcd087029f ("firmware: qcom: scm: Fix interrupted SCM calls")
Without this change, the Qualcomm ARM32 platforms like SDX55 will return -EINVAL for SMC calls used for modem firmware loading and validation.
Signed-off-by: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org Reviewed-by: Bjorn Andersson bjorn.andersson@linaro.org Signed-off-by: Russell King rmk+kernel@armlinux.org.uk Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/kernel/asm-offsets.c | 3 +++ arch/arm/kernel/smccc-call.S | 11 ++++++++++- 2 files changed, 13 insertions(+), 1 deletion(-)
diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c index ae85f67a6352..40afe953a0e2 100644 --- a/arch/arm/kernel/asm-offsets.c +++ b/arch/arm/kernel/asm-offsets.c @@ -30,6 +30,7 @@ #include <asm/vdso_datapage.h> #include <asm/hardware/cache-l2x0.h> #include <linux/kbuild.h> +#include <linux/arm-smccc.h> #include "signal.h"
/* @@ -159,6 +160,8 @@ int main(void) DEFINE(SLEEP_SAVE_SP_PHYS, offsetof(struct sleep_save_sp, save_ptr_stash_phys)); DEFINE(SLEEP_SAVE_SP_VIRT, offsetof(struct sleep_save_sp, save_ptr_stash)); #endif + DEFINE(ARM_SMCCC_QUIRK_ID_OFFS, offsetof(struct arm_smccc_quirk, id)); + DEFINE(ARM_SMCCC_QUIRK_STATE_OFFS, offsetof(struct arm_smccc_quirk, state)); BLANK(); DEFINE(DMA_BIDIRECTIONAL, DMA_BIDIRECTIONAL); DEFINE(DMA_TO_DEVICE, DMA_TO_DEVICE); diff --git a/arch/arm/kernel/smccc-call.S b/arch/arm/kernel/smccc-call.S index e5d43066b889..13d307cd364c 100644 --- a/arch/arm/kernel/smccc-call.S +++ b/arch/arm/kernel/smccc-call.S @@ -12,7 +12,9 @@ * */ #include <linux/linkage.h> +#include <linux/arm-smccc.h>
+#include <asm/asm-offsets.h> #include <asm/opcodes-sec.h> #include <asm/opcodes-virt.h> #include <asm/unwind.h> @@ -36,7 +38,14 @@ UNWIND( .fnstart) UNWIND( .save {r4-r7}) ldm r12, {r4-r7} \instr - pop {r4-r7} + ldr r4, [sp, #36] + cmp r4, #0 + beq 1f // No quirk structure + ldr r5, [r4, #ARM_SMCCC_QUIRK_ID_OFFS] + cmp r5, #ARM_SMCCC_QUIRK_QCOM_A6 + bne 1f // No quirk present + str r6, [r4, #ARM_SMCCC_QUIRK_STATE_OFFS] +1: pop {r4-r7} ldr r12, [sp, #(4 * 4)] stm r12, {r0-r3} bx lr
From: Nathan Chancellor nathan@kernel.org
[ Upstream commit 2f095504f4b9cf75856d6a9cf90299cf75aa46c5 ]
Clang can generate R_RISCV_CALL_PLT relocations to _mcount:
$ llvm-objdump -dr build/riscv/init/main.o | rg mcount 000000000000000e: R_RISCV_CALL_PLT _mcount 000000000000004e: R_RISCV_CALL_PLT _mcount
After this, the __start_mcount_loc section is properly generated and function tracing still works.
Link: https://github.com/ClangBuiltLinux/linux/issues/1331 Signed-off-by: Nathan Chancellor nathan@kernel.org Reviewed-by: Fangrui Song maskray@google.com Signed-off-by: Palmer Dabbelt palmerdabbelt@google.com Signed-off-by: Sasha Levin sashal@kernel.org --- scripts/recordmcount.pl | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/scripts/recordmcount.pl b/scripts/recordmcount.pl index 9a8fe8ea6b03..bc12e12e4b3a 100755 --- a/scripts/recordmcount.pl +++ b/scripts/recordmcount.pl @@ -395,7 +395,7 @@ if ($arch eq "x86_64") { $mcount_regex = "^\s*([0-9a-fA-F]+):.*\s_mcount$"; } elsif ($arch eq "riscv") { $function_regex = "^([0-9a-fA-F]+)\s+<([^.0-9][0-9a-zA-Z_\.]+)>:"; - $mcount_regex = "^\s*([0-9a-fA-F]+):\sR_RISCV_CALL\s_mcount$"; + $mcount_regex = "^\s*([0-9a-fA-F]+):\sR_RISCV_CALL(_PLT)?\s_mcount$"; $type = ".quad"; $alignment = 2; } elsif ($arch eq "nds32") {
From: Nathan Chancellor nathan@kernel.org
[ Upstream commit 7ce04771503074a7de7f539cc43f5e1b385cb99b ]
Prior to clang 13.0.0, the RISC-V name for the mcount symbol was "mcount", which differs from the GCC version of "_mcount", which results in the following errors:
riscv64-linux-gnu-ld: init/main.o: in function `__traceiter_initcall_level': main.c:(.text+0xe): undefined reference to `mcount' riscv64-linux-gnu-ld: init/main.o: in function `__traceiter_initcall_start': main.c:(.text+0x4e): undefined reference to `mcount' riscv64-linux-gnu-ld: init/main.o: in function `__traceiter_initcall_finish': main.c:(.text+0x92): undefined reference to `mcount' riscv64-linux-gnu-ld: init/main.o: in function `.LBB32_28': main.c:(.text+0x30c): undefined reference to `mcount' riscv64-linux-gnu-ld: init/main.o: in function `free_initmem': main.c:(.text+0x54c): undefined reference to `mcount'
This has been corrected in https://reviews.llvm.org/D98881 but the minimum supported clang version is 10.0.1. To avoid build errors and to gain a working function tracer, adjust the name of the mcount symbol for older versions of clang in mount.S and recordmcount.pl.
Link: https://github.com/ClangBuiltLinux/linux/issues/1331 Signed-off-by: Nathan Chancellor nathan@kernel.org Reviewed-by: Nick Desaulniers ndesaulniers@google.com Signed-off-by: Palmer Dabbelt palmerdabbelt@google.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/riscv/include/asm/ftrace.h | 14 ++++++++++++-- arch/riscv/kernel/mcount.S | 10 +++++----- scripts/recordmcount.pl | 2 +- 3 files changed, 18 insertions(+), 8 deletions(-)
diff --git a/arch/riscv/include/asm/ftrace.h b/arch/riscv/include/asm/ftrace.h index 02fbc175142e..693c3839a7df 100644 --- a/arch/riscv/include/asm/ftrace.h +++ b/arch/riscv/include/asm/ftrace.h @@ -10,9 +10,19 @@ #endif #define HAVE_FUNCTION_GRAPH_RET_ADDR_PTR
+/* + * Clang prior to 13 had "mcount" instead of "_mcount": + * https://reviews.llvm.org/D98881 + */ +#if defined(CONFIG_CC_IS_GCC) || CONFIG_CLANG_VERSION >= 130000 +#define MCOUNT_NAME _mcount +#else +#define MCOUNT_NAME mcount +#endif + #define ARCH_SUPPORTS_FTRACE_OPS 1 #ifndef __ASSEMBLY__ -void _mcount(void); +void MCOUNT_NAME(void); static inline unsigned long ftrace_call_adjust(unsigned long addr) { return addr; @@ -33,7 +43,7 @@ struct dyn_arch_ftrace { * both auipc and jalr at the same time. */
-#define MCOUNT_ADDR ((unsigned long)_mcount) +#define MCOUNT_ADDR ((unsigned long)MCOUNT_NAME) #define JALR_SIGN_MASK (0x00000800) #define JALR_OFFSET_MASK (0x00000fff) #define AUIPC_OFFSET_MASK (0xfffff000) diff --git a/arch/riscv/kernel/mcount.S b/arch/riscv/kernel/mcount.S index 5721624886a1..fabddee90d1b 100644 --- a/arch/riscv/kernel/mcount.S +++ b/arch/riscv/kernel/mcount.S @@ -47,8 +47,8 @@
ENTRY(ftrace_stub) #ifdef CONFIG_DYNAMIC_FTRACE - .global _mcount - .set _mcount, ftrace_stub + .global MCOUNT_NAME + .set MCOUNT_NAME, ftrace_stub #endif ret ENDPROC(ftrace_stub) @@ -79,7 +79,7 @@ EXPORT_SYMBOL(return_to_handler) #endif
#ifndef CONFIG_DYNAMIC_FTRACE -ENTRY(_mcount) +ENTRY(MCOUNT_NAME) la t4, ftrace_stub #ifdef CONFIG_FUNCTION_GRAPH_TRACER la t0, ftrace_graph_return @@ -125,6 +125,6 @@ do_trace: jalr t5 RESTORE_ABI_STATE ret -ENDPROC(_mcount) +ENDPROC(MCOUNT_NAME) #endif -EXPORT_SYMBOL(_mcount) +EXPORT_SYMBOL(MCOUNT_NAME) diff --git a/scripts/recordmcount.pl b/scripts/recordmcount.pl index bc12e12e4b3a..657e69125a46 100755 --- a/scripts/recordmcount.pl +++ b/scripts/recordmcount.pl @@ -395,7 +395,7 @@ if ($arch eq "x86_64") { $mcount_regex = "^\s*([0-9a-fA-F]+):.*\s_mcount$"; } elsif ($arch eq "riscv") { $function_regex = "^([0-9a-fA-F]+)\s+<([^.0-9][0-9a-zA-Z_\.]+)>:"; - $mcount_regex = "^\s*([0-9a-fA-F]+):\sR_RISCV_CALL(_PLT)?\s_mcount$"; + $mcount_regex = "^\s*([0-9a-fA-F]+):\sR_RISCV_CALL(_PLT)?\s_?mcount$"; $type = ".quad"; $alignment = 2; } elsif ($arch eq "nds32") {
From: Jeff Layton jlayton@kernel.org
[ Upstream commit 10a7052c7868bc7bc72d947f5aac6f768928db87 ]
Ensure that we invalidate the fscache whenever we invalidate the pagecache.
Signed-off-by: Jeff Layton jlayton@kernel.org Signed-off-by: Ilya Dryomov idryomov@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ceph/caps.c | 1 + fs/ceph/inode.c | 1 + 2 files changed, 2 insertions(+)
diff --git a/fs/ceph/caps.c b/fs/ceph/caps.c index 6e871a382209..918781c51f0b 100644 --- a/fs/ceph/caps.c +++ b/fs/ceph/caps.c @@ -1779,6 +1779,7 @@ static int try_nonblocking_invalidate(struct inode *inode) u32 invalidating_gen = ci->i_rdcache_gen;
spin_unlock(&ci->i_ceph_lock); + ceph_fscache_invalidate(inode); invalidate_mapping_pages(&inode->i_data, 0, -1); spin_lock(&ci->i_ceph_lock);
diff --git a/fs/ceph/inode.c b/fs/ceph/inode.c index 3c24fb77ef32..5f041fede7aa 100644 --- a/fs/ceph/inode.c +++ b/fs/ceph/inode.c @@ -1823,6 +1823,7 @@ static void ceph_invalidate_work(struct work_struct *work) orig_gen = ci->i_rdcache_gen; spin_unlock(&ci->i_ceph_lock);
+ ceph_fscache_invalidate(inode); if (invalidate_inode_pages2(inode->i_mapping) < 0) { pr_err("invalidate_pages %p fails\n", inode); }
From: Bodo Stroesser bostroesser@gmail.com
[ Upstream commit 9814b55cde0588b6d9bc496cee43f87316cbc6f1 ]
If tcmu_handle_completions() finds an invalid cmd_id while looping over cmd responses from userspace it sets TCMU_DEV_BIT_BROKEN and breaks the loop. This means that it does further handling for the tcmu device.
Skip that handling by replacing 'break' with 'return'.
Additionally change tcmu_handle_completions() from unsigned int to bool, since the value used in return already is bool.
Link: https://lore.kernel.org/r/20210423150123.24468-1-bostroesser@gmail.com Signed-off-by: Bodo Stroesser bostroesser@gmail.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/target/target_core_user.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/target/target_core_user.c b/drivers/target/target_core_user.c index 0219b5a865be..dd7307375504 100644 --- a/drivers/target/target_core_user.c +++ b/drivers/target/target_core_user.c @@ -1216,7 +1216,7 @@ static void tcmu_set_next_deadline(struct list_head *queue, del_timer(timer); }
-static unsigned int tcmu_handle_completions(struct tcmu_dev *udev) +static bool tcmu_handle_completions(struct tcmu_dev *udev) { struct tcmu_mailbox *mb; struct tcmu_cmd *cmd; @@ -1256,7 +1256,7 @@ static unsigned int tcmu_handle_completions(struct tcmu_dev *udev) pr_err("cmd_id %u not found, ring is broken\n", entry->hdr.cmd_id); set_bit(TCMU_DEV_BIT_BROKEN, &udev->flags); - break; + return false; }
tcmu_handle_completion(cmd, entry);
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit da91ece226729c76f60708efc275ebd4716ad089 ]
Like some other Bay and Cherry Trail SoC based devices the Dell Venue 10 Pro 5055 has an embedded-controller which uses ACPI GPIO events to report events instead of using the standard ACPI EC interface for this.
The EC interrupt is only used to report battery-level changes and it keeps doing this while the system is suspended, causing the system to not stay suspended.
Add an ignore-wake quirk for the GPIO pin used by the EC to fix the spurious wakeups from suspend.
Signed-off-by: Hans de Goede hdegoede@redhat.com Acked-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpio/gpiolib-acpi.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
diff --git a/drivers/gpio/gpiolib-acpi.c b/drivers/gpio/gpiolib-acpi.c index 4ad34c6803ad..b018909a4e46 100644 --- a/drivers/gpio/gpiolib-acpi.c +++ b/drivers/gpio/gpiolib-acpi.c @@ -1355,6 +1355,20 @@ static const struct dmi_system_id gpiolib_acpi_quirks[] = { .no_edge_events_on_boot = true, }, }, + { + /* + * The Dell Venue 10 Pro 5055, with Bay Trail SoC + TI PMIC uses an + * external embedded-controller connected via I2C + an ACPI GPIO + * event handler on INT33FFC:02 pin 12, causing spurious wakeups. + */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "Venue 10 Pro 5055"), + }, + .driver_data = &(struct acpi_gpiolib_dmi_quirk) { + .ignore_wake = "INT33FC:02@12", + }, + }, { /* * HP X2 10 models with Cherry Trail SoC + TI PMIC use an
From: Hui Wang hui.wang@canonical.com
[ Upstream commit f48652bbe3ae62ba2835a396b7e01f063e51c4cd ]
Without this change, the DAC ctl's name could be changed only when the machine has both Speaker and Headphone, but we met some machines which only has Lineout and Headhpone, and the Lineout and Headphone share the Audio Mixer0 and DAC0, the ctl's name is set to "Front".
On most of machines, the "Front" is used for Speaker only or Lineout only, but on this machine it is shared by Lineout and Headphone, This introduces an issue in the pipewire and pulseaudio, suppose users want the Headphone to be on and the Speaker/Lineout to be off, they could turn off the "Front", this works on most of the machines, but on this machine, the "Front" couldn't be turned off otherwise the headphone will be off too. Here we do some change to let the ctl's name change to "Headphone+LO" on this machine, and pipewire and pulseaudio already could handle "Headphone+LO" and "Speaker+LO". (https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/747)
BugLink: http://bugs.launchpad.net/bugs/804178 Signed-off-by: Hui Wang hui.wang@canonical.com Link: https://lore.kernel.org/r/20210504073917.22406-1-hui.wang@canonical.com Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/pci/hda/hda_generic.c | 16 +++++++++++----- 1 file changed, 11 insertions(+), 5 deletions(-)
diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c index b9f7b23ae378..6099a9f1cb3d 100644 --- a/sound/pci/hda/hda_generic.c +++ b/sound/pci/hda/hda_generic.c @@ -1214,11 +1214,17 @@ static const char *get_line_out_pfx(struct hda_codec *codec, int ch, *index = ch; return "Headphone"; case AUTO_PIN_LINE_OUT: - /* This deals with the case where we have two DACs and - * one LO, one HP and one Speaker */ - if (!ch && cfg->speaker_outs && cfg->hp_outs) { - bool hp_lo_shared = !path_has_mixer(codec, spec->hp_paths[0], ctl_type); - bool spk_lo_shared = !path_has_mixer(codec, spec->speaker_paths[0], ctl_type); + /* This deals with the case where one HP or one Speaker or + * one HP + one Speaker need to share the DAC with LO + */ + if (!ch) { + bool hp_lo_shared = false, spk_lo_shared = false; + + if (cfg->speaker_outs) + spk_lo_shared = !path_has_mixer(codec, + spec->speaker_paths[0], ctl_type); + if (cfg->hp_outs) + hp_lo_shared = !path_has_mixer(codec, spec->hp_paths[0], ctl_type); if (hp_lo_shared && spk_lo_shared) return spec->vmaster_mute.hook ? "PCM" : "Master"; if (hp_lo_shared)
From: yangerkun yangerkun@huawei.com
[ Upstream commit cf7b39a0cbf6bf57aa07a008d46cf695add05b4c ]
We get a bug:
BUG: KASAN: slab-out-of-bounds in iov_iter_revert+0x11c/0x404 lib/iov_iter.c:1139 Read of size 8 at addr ffff0000d3fb11f8 by task
CPU: 0 PID: 12582 Comm: syz-executor.2 Not tainted 5.10.0-00843-g352c8610ccd2 #2 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x0/0x2d0 arch/arm64/kernel/stacktrace.c:132 show_stack+0x28/0x34 arch/arm64/kernel/stacktrace.c:196 __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x110/0x164 lib/dump_stack.c:118 print_address_description+0x78/0x5c8 mm/kasan/report.c:385 __kasan_report mm/kasan/report.c:545 [inline] kasan_report+0x148/0x1e4 mm/kasan/report.c:562 check_memory_region_inline mm/kasan/generic.c:183 [inline] __asan_load8+0xb4/0xbc mm/kasan/generic.c:252 iov_iter_revert+0x11c/0x404 lib/iov_iter.c:1139 io_read fs/io_uring.c:3421 [inline] io_issue_sqe+0x2344/0x2d64 fs/io_uring.c:5943 __io_queue_sqe+0x19c/0x520 fs/io_uring.c:6260 io_queue_sqe+0x2a4/0x590 fs/io_uring.c:6326 io_submit_sqe fs/io_uring.c:6395 [inline] io_submit_sqes+0x4c0/0xa04 fs/io_uring.c:6624 __do_sys_io_uring_enter fs/io_uring.c:9013 [inline] __se_sys_io_uring_enter fs/io_uring.c:8960 [inline] __arm64_sys_io_uring_enter+0x190/0x708 fs/io_uring.c:8960 __invoke_syscall arch/arm64/kernel/syscall.c:36 [inline] invoke_syscall arch/arm64/kernel/syscall.c:48 [inline] el0_svc_common arch/arm64/kernel/syscall.c:158 [inline] do_el0_svc+0x120/0x290 arch/arm64/kernel/syscall.c:227 el0_svc+0x1c/0x28 arch/arm64/kernel/entry-common.c:367 el0_sync_handler+0x98/0x170 arch/arm64/kernel/entry-common.c:383 el0_sync+0x140/0x180 arch/arm64/kernel/entry.S:670
Allocated by task 12570: stack_trace_save+0x80/0xb8 kernel/stacktrace.c:121 kasan_save_stack mm/kasan/common.c:48 [inline] kasan_set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc+0xdc/0x120 mm/kasan/common.c:461 kasan_kmalloc+0xc/0x14 mm/kasan/common.c:475 __kmalloc+0x23c/0x334 mm/slub.c:3970 kmalloc include/linux/slab.h:557 [inline] __io_alloc_async_data+0x68/0x9c fs/io_uring.c:3210 io_setup_async_rw fs/io_uring.c:3229 [inline] io_read fs/io_uring.c:3436 [inline] io_issue_sqe+0x2954/0x2d64 fs/io_uring.c:5943 __io_queue_sqe+0x19c/0x520 fs/io_uring.c:6260 io_queue_sqe+0x2a4/0x590 fs/io_uring.c:6326 io_submit_sqe fs/io_uring.c:6395 [inline] io_submit_sqes+0x4c0/0xa04 fs/io_uring.c:6624 __do_sys_io_uring_enter fs/io_uring.c:9013 [inline] __se_sys_io_uring_enter fs/io_uring.c:8960 [inline] __arm64_sys_io_uring_enter+0x190/0x708 fs/io_uring.c:8960 __invoke_syscall arch/arm64/kernel/syscall.c:36 [inline] invoke_syscall arch/arm64/kernel/syscall.c:48 [inline] el0_svc_common arch/arm64/kernel/syscall.c:158 [inline] do_el0_svc+0x120/0x290 arch/arm64/kernel/syscall.c:227 el0_svc+0x1c/0x28 arch/arm64/kernel/entry-common.c:367 el0_sync_handler+0x98/0x170 arch/arm64/kernel/entry-common.c:383 el0_sync+0x140/0x180 arch/arm64/kernel/entry.S:670
Freed by task 12570: stack_trace_save+0x80/0xb8 kernel/stacktrace.c:121 kasan_save_stack mm/kasan/common.c:48 [inline] kasan_set_track+0x38/0x6c mm/kasan/common.c:56 kasan_set_free_info+0x20/0x40 mm/kasan/generic.c:355 __kasan_slab_free+0x124/0x150 mm/kasan/common.c:422 kasan_slab_free+0x10/0x1c mm/kasan/common.c:431 slab_free_hook mm/slub.c:1544 [inline] slab_free_freelist_hook mm/slub.c:1577 [inline] slab_free mm/slub.c:3142 [inline] kfree+0x104/0x38c mm/slub.c:4124 io_dismantle_req fs/io_uring.c:1855 [inline] __io_free_req+0x70/0x254 fs/io_uring.c:1867 io_put_req_find_next fs/io_uring.c:2173 [inline] __io_queue_sqe+0x1fc/0x520 fs/io_uring.c:6279 __io_req_task_submit+0x154/0x21c fs/io_uring.c:2051 io_req_task_submit+0x2c/0x44 fs/io_uring.c:2063 task_work_run+0xdc/0x128 kernel/task_work.c:151 get_signal+0x6f8/0x980 kernel/signal.c:2562 do_signal+0x108/0x3a4 arch/arm64/kernel/signal.c:658 do_notify_resume+0xbc/0x25c arch/arm64/kernel/signal.c:722 work_pending+0xc/0x180
blkdev_read_iter can truncate iov_iter's count since the count + pos may exceed the size of the blkdev. This will confuse io_read that we have consume the iovec. And once we do the iov_iter_revert in io_read, we will trigger the slab-out-of-bounds. Fix it by reexpand the count with size has been truncated.
blkdev_write_iter can trigger the problem too.
Signed-off-by: yangerkun yangerkun@huawei.com Acked-by: Pavel Begunkov asml.silencec@gmail.com Link: https://lore.kernel.org/r/20210401071807.3328235-1-yangerkun@huawei.com Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- fs/block_dev.c | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-)
diff --git a/fs/block_dev.c b/fs/block_dev.c index 9f3faac49025..b34f76af59c4 100644 --- a/fs/block_dev.c +++ b/fs/block_dev.c @@ -1919,6 +1919,7 @@ ssize_t blkdev_write_iter(struct kiocb *iocb, struct iov_iter *from) struct inode *bd_inode = bdev_file_inode(file); loff_t size = i_size_read(bd_inode); struct blk_plug plug; + size_t shorted = 0; ssize_t ret;
if (bdev_read_only(I_BDEV(bd_inode))) @@ -1933,12 +1934,17 @@ ssize_t blkdev_write_iter(struct kiocb *iocb, struct iov_iter *from) if ((iocb->ki_flags & (IOCB_NOWAIT | IOCB_DIRECT)) == IOCB_NOWAIT) return -EOPNOTSUPP;
- iov_iter_truncate(from, size - iocb->ki_pos); + size -= iocb->ki_pos; + if (iov_iter_count(from) > size) { + shorted = iov_iter_count(from) - size; + iov_iter_truncate(from, size); + }
blk_start_plug(&plug); ret = __generic_file_write_iter(iocb, from); if (ret > 0) ret = generic_write_sync(iocb, ret); + iov_iter_reexpand(from, iov_iter_count(from) + shorted); blk_finish_plug(&plug); return ret; } @@ -1950,13 +1956,21 @@ ssize_t blkdev_read_iter(struct kiocb *iocb, struct iov_iter *to) struct inode *bd_inode = bdev_file_inode(file); loff_t size = i_size_read(bd_inode); loff_t pos = iocb->ki_pos; + size_t shorted = 0; + ssize_t ret;
if (pos >= size) return 0;
size -= pos; - iov_iter_truncate(to, size); - return generic_file_read_iter(iocb, to); + if (iov_iter_count(to) > size) { + shorted = iov_iter_count(to) - size; + iov_iter_truncate(to, size); + } + + ret = generic_file_read_iter(iocb, to); + iov_iter_reexpand(to, iov_iter_count(to) + shorted); + return ret; } EXPORT_SYMBOL_GPL(blkdev_read_iter);
From: Zqiang qiang.zhang@windriver.com
[ Upstream commit 78564b9434878d686c5f88c4488b20cccbcc42bc ]
In RT system, the spin_lock will be replaced by sleepable rt_mutex lock, in __call_rcu(), disable interrupts before calling kasan_record_aux_stack(), will trigger this calltrace:
BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:951 in_atomic(): 0, irqs_disabled(): 1, non_block: 0, pid: 19, name: pgdatinit0 Call Trace: ___might_sleep.cold+0x1b2/0x1f1 rt_spin_lock+0x3b/0xb0 stack_depot_save+0x1b9/0x440 kasan_save_stack+0x32/0x40 kasan_record_aux_stack+0xa5/0xb0 __call_rcu+0x117/0x880 __exit_signal+0xafb/0x1180 release_task+0x1d6/0x480 exit_notify+0x303/0x750 do_exit+0x678/0xcf0 kthread+0x364/0x4f0 ret_from_fork+0x22/0x30
Replace spinlock with raw_spinlock.
Link: https://lkml.kernel.org/r/20210329084009.27013-1-qiang.zhang@windriver.com Signed-off-by: Zqiang qiang.zhang@windriver.com Reported-by: Andrew Halaney ahalaney@redhat.com Cc: Alexander Potapenko glider@google.com Cc: Gustavo A. R. Silva gustavoars@kernel.org Cc: Vijayanand Jitta vjitta@codeaurora.org Cc: Vinayak Menon vinmenon@codeaurora.org Cc: Yogesh Lal ylal@codeaurora.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- lib/stackdepot.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/lib/stackdepot.c b/lib/stackdepot.c index 3376a3291186..d0f1b7d0ce2e 100644 --- a/lib/stackdepot.c +++ b/lib/stackdepot.c @@ -78,7 +78,7 @@ static void *stack_slabs[STACK_ALLOC_MAX_SLABS]; static int depot_index; static int next_slab_inited; static size_t depot_offset; -static DEFINE_SPINLOCK(depot_lock); +static DEFINE_RAW_SPINLOCK(depot_lock);
static bool init_stack_slab(void **prealloc) { @@ -266,7 +266,7 @@ depot_stack_handle_t depot_save_stack(struct stack_trace *trace, prealloc = page_address(page); }
- spin_lock_irqsave(&depot_lock, flags); + raw_spin_lock_irqsave(&depot_lock, flags);
found = find_stack(*bucket, trace->entries, trace->nr_entries, hash); if (!found) { @@ -290,7 +290,7 @@ depot_stack_handle_t depot_save_stack(struct stack_trace *trace, WARN_ON(!init_stack_slab(&prealloc)); }
- spin_unlock_irqrestore(&depot_lock, flags); + raw_spin_unlock_irqrestore(&depot_lock, flags); exit: if (prealloc) { /* Nobody used this memory, ok to free it. */
From: Yannick Vignon yannick.vignon@nxp.com
[ Upstream commit 8a7cb245cf28cb3e541e0d6c8624b95d079e155b ]
The RX FIFO overflows when the system is not able to process all received packets and they start accumulating (first in the DMA queue in memory, then in the FIFO). An interrupt is then raised for each overflowing packet and handled in stmmac_interrupt(). This is counter-productive, since it brings the system (or more likely, one CPU core) to its knees to process the FIFO overflow interrupts.
stmmac_interrupt() handles overflow interrupts by writing the rx tail ptr into the corresponding hardware register (according to the MAC spec, this has the effect of restarting the MAC DMA). However, without freeing any rx descriptors, the DMA stops right away, and another overflow interrupt is raised as the FIFO overflows again. Since the DMA is already restarted at the end of stmmac_rx_refill() after freeing descriptors, disabling FIFO overflow interrupts and the corresponding handling code has no side effect, and eliminates the interrupt storm when the RX FIFO overflows.
Signed-off-by: Yannick Vignon yannick.vignon@nxp.com Link: https://lore.kernel.org/r/20210506143312.20784-1-yannick.vignon@oss.nxp.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c | 7 +------ drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 14 ++------------ 2 files changed, 3 insertions(+), 18 deletions(-)
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c index 8c3780d1105f..232efe17ac2c 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_dma.c @@ -214,7 +214,7 @@ static void dwmac4_dma_rx_chan_op_mode(void __iomem *ioaddr, int mode, u32 channel, int fifosz, u8 qmode) { unsigned int rqs = fifosz / 256 - 1; - u32 mtl_rx_op, mtl_rx_int; + u32 mtl_rx_op;
mtl_rx_op = readl(ioaddr + MTL_CHAN_RX_OP_MODE(channel));
@@ -285,11 +285,6 @@ static void dwmac4_dma_rx_chan_op_mode(void __iomem *ioaddr, int mode, }
writel(mtl_rx_op, ioaddr + MTL_CHAN_RX_OP_MODE(channel)); - - /* Enable MTL RX overflow */ - mtl_rx_int = readl(ioaddr + MTL_CHAN_INT_CTRL(channel)); - writel(mtl_rx_int | MTL_RX_OVERFLOW_INT_EN, - ioaddr + MTL_CHAN_INT_CTRL(channel)); }
static void dwmac4_dma_tx_chan_op_mode(void __iomem *ioaddr, int mode, diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index a1443d7197e8..af59761ddfa0 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -3706,7 +3706,6 @@ static irqreturn_t stmmac_interrupt(int irq, void *dev_id) /* To handle GMAC own interrupts */ if ((priv->plat->has_gmac) || xmac) { int status = stmmac_host_irq_status(priv, priv->hw, &priv->xstats); - int mtl_status;
if (unlikely(status)) { /* For LPI we need to save the tx status */ @@ -3717,17 +3716,8 @@ static irqreturn_t stmmac_interrupt(int irq, void *dev_id) }
for (queue = 0; queue < queues_count; queue++) { - struct stmmac_rx_queue *rx_q = &priv->rx_queue[queue]; - - mtl_status = stmmac_host_mtl_irq_status(priv, priv->hw, - queue); - if (mtl_status != -EINVAL) - status |= mtl_status; - - if (status & CORE_IRQ_MTL_RX_OVERFLOW) - stmmac_set_rx_tail_ptr(priv, priv->ioaddr, - rx_q->rx_tail_addr, - queue); + status = stmmac_host_mtl_irq_status(priv, priv->hw, + queue); }
/* PCS link status */
linux-stable-mirror@lists.linaro.org
-
Sasha Levin