From: Filipe Manana fdmanana@suse.com
commit 939b656bc8ab203fdbde26ccac22bcb7f0985be5 upstream.
During an append (O_APPEND write flag) direct IO write if the input buffer was not previously faulted in, we can corrupt the file in a way that the final size is unexpected and it includes an unexpected hole.
The problem happens like this:
1) We have an empty file, with size 0, for example;
2) We do an O_APPEND direct IO with a length of 4096 bytes and the input buffer is not currently faulted in;
3) We enter btrfs_direct_write(), lock the inode and call generic_write_checks(), which calls generic_write_checks_count(), and that function sets the iocb position to 0 with the following code:
if (iocb->ki_flags & IOCB_APPEND) iocb->ki_pos = i_size_read(inode);
4) We call btrfs_dio_write() and enter into iomap, which will end up calling btrfs_dio_iomap_begin() and that calls btrfs_get_blocks_direct_write(), where we update the i_size of the inode to 4096 bytes;
5) After btrfs_dio_iomap_begin() returns, iomap will attempt to access the page of the write input buffer (at iomap_dio_bio_iter(), with a call to bio_iov_iter_get_pages()) and fail with -EFAULT, which gets returned to btrfs at btrfs_direct_write() via btrfs_dio_write();
6) At btrfs_direct_write() we get the -EFAULT error, unlock the inode, fault in the write buffer and then goto to the label 'relock';
7) We lock again the inode, do all the necessary checks again and call again generic_write_checks(), which calls generic_write_checks_count() again, and there we set the iocb's position to 4K, which is the current i_size of the inode, with the following code pointed above:
if (iocb->ki_flags & IOCB_APPEND) iocb->ki_pos = i_size_read(inode);
8) Then we go again to btrfs_dio_write() and enter iomap and the write succeeds, but it wrote to the file range [4K, 8K[, leaving a hole in the [0, 4K[ range and an i_size of 8K, which goes against the expections of having the data written to the range [0, 4K[ and get an i_size of 4K.
Fix this by not unlocking the inode before faulting in the input buffer, in case we get -EFAULT or an incomplete write, and not jumping to the 'relock' label after faulting in the buffer - instead jump to a location immediately before calling iomap, skipping all the write checks and relocking. This solves this problem and it's fine even in case the input buffer is memory mapped to the same file range, since only holding the range locked in the inode's io tree can cause a deadlock, it's safe to keep the inode lock (VFS lock), as was fixed and described in commit 51bd9563b678 ("btrfs: fix deadlock due to page faults during direct IO reads and writes").
A sample reproducer provided by a reporter is the following:
$ cat test.c #ifndef _GNU_SOURCE #define _GNU_SOURCE #endif
#include <fcntl.h> #include <stdio.h> #include <sys/mman.h> #include <sys/stat.h> #include <unistd.h>
int main(int argc, char *argv[]) { if (argc < 2) { fprintf(stderr, "Usage: %s <test file>\n", argv[0]); return 1; }
int fd = open(argv[1], O_WRONLY | O_CREAT | O_TRUNC | O_DIRECT | O_APPEND, 0644); if (fd < 0) { perror("creating test file"); return 1; }
char *buf = mmap(NULL, 4096, PROT_READ, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); ssize_t ret = write(fd, buf, 4096); if (ret < 0) { perror("pwritev2"); return 1; }
struct stat stbuf; ret = fstat(fd, &stbuf); if (ret < 0) { perror("stat"); return 1; }
printf("size: %llu\n", (unsigned long long)stbuf.st_size); return stbuf.st_size == 4096 ? 0 : 1; }
A test case for fstests will be sent soon.
Reported-by: Hanna Czenczek hreitz@redhat.com Link: https://lore.kernel.org/linux-btrfs/0b841d46-12fe-4e64-9abb-871d8d0de271@red... Fixes: 8184620ae212 ("btrfs: fix lost file sync on direct IO write with nowait and dsync iocb") Signed-off-by: Filipe Manana fdmanana@suse.com --- fs/btrfs/ctree.h | 1 + fs/btrfs/file.c | 55 ++++++++++++++++++++++++++++++++++++------------ 2 files changed, 43 insertions(+), 13 deletions(-)
diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h index 06333a74d6c4..86c7f8ce1715 100644 --- a/fs/btrfs/ctree.h +++ b/fs/btrfs/ctree.h @@ -445,6 +445,7 @@ struct btrfs_file_private { void *filldir_buf; u64 last_index; struct extent_state *llseek_cached_state; + bool fsync_skip_inode_lock; };
static inline u32 BTRFS_LEAF_DATA_SIZE(const struct btrfs_fs_info *info) diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index c997b790568f..a47a7bbf9b7e 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -1535,21 +1535,37 @@ static ssize_t btrfs_direct_write(struct kiocb *iocb, struct iov_iter *from) * So here we disable page faults in the iov_iter and then retry if we * got -EFAULT, faulting in the pages before the retry. */ +again: from->nofault = true; dio = btrfs_dio_write(iocb, from, written); from->nofault = false;
- /* - * iomap_dio_complete() will call btrfs_sync_file() if we have a dsync - * iocb, and that needs to lock the inode. So unlock it before calling - * iomap_dio_complete() to avoid a deadlock. - */ - btrfs_inode_unlock(BTRFS_I(inode), ilock_flags); - - if (IS_ERR_OR_NULL(dio)) + if (IS_ERR_OR_NULL(dio)) { err = PTR_ERR_OR_ZERO(dio); - else + } else { + struct btrfs_file_private stack_private = { 0 }; + struct btrfs_file_private *private; + const bool have_private = (file->private_data != NULL); + + if (!have_private) + file->private_data = &stack_private; + + /* + * If we have a synchoronous write, we must make sure the fsync + * triggered by the iomap_dio_complete() call below doesn't + * deadlock on the inode lock - we are already holding it and we + * can't call it after unlocking because we may need to complete + * partial writes due to the input buffer (or parts of it) not + * being already faulted in. + */ + private = file->private_data; + private->fsync_skip_inode_lock = true; err = iomap_dio_complete(dio); + private->fsync_skip_inode_lock = false; + + if (!have_private) + file->private_data = NULL; + }
/* No increment (+=) because iomap returns a cumulative value. */ if (err > 0) @@ -1576,10 +1592,12 @@ static ssize_t btrfs_direct_write(struct kiocb *iocb, struct iov_iter *from) } else { fault_in_iov_iter_readable(from, left); prev_left = left; - goto relock; + goto again; } }
+ btrfs_inode_unlock(BTRFS_I(inode), ilock_flags); + /* * If 'err' is -ENOTBLK or we have not written all data, then it means * we must fallback to buffered IO. @@ -1778,6 +1796,7 @@ static inline bool skip_inode_logging(const struct btrfs_log_ctx *ctx) */ int btrfs_sync_file(struct file *file, loff_t start, loff_t end, int datasync) { + struct btrfs_file_private *private = file->private_data; struct dentry *dentry = file_dentry(file); struct inode *inode = d_inode(dentry); struct btrfs_fs_info *fs_info = btrfs_sb(inode->i_sb); @@ -1787,6 +1806,7 @@ int btrfs_sync_file(struct file *file, loff_t start, loff_t end, int datasync) int ret = 0, err; u64 len; bool full_sync; + const bool skip_ilock = (private ? private->fsync_skip_inode_lock : false);
trace_btrfs_sync_file(file, datasync);
@@ -1814,7 +1834,10 @@ int btrfs_sync_file(struct file *file, loff_t start, loff_t end, int datasync) if (ret) goto out;
- btrfs_inode_lock(BTRFS_I(inode), BTRFS_ILOCK_MMAP); + if (skip_ilock) + down_write(&BTRFS_I(inode)->i_mmap_lock); + else + btrfs_inode_lock(BTRFS_I(inode), BTRFS_ILOCK_MMAP);
atomic_inc(&root->log_batch);
@@ -1838,7 +1861,10 @@ int btrfs_sync_file(struct file *file, loff_t start, loff_t end, int datasync) */ ret = start_ordered_ops(inode, start, end); if (ret) { - btrfs_inode_unlock(BTRFS_I(inode), BTRFS_ILOCK_MMAP); + if (skip_ilock) + up_write(&BTRFS_I(inode)->i_mmap_lock); + else + btrfs_inode_unlock(BTRFS_I(inode), BTRFS_ILOCK_MMAP); goto out; }
@@ -1941,7 +1967,10 @@ int btrfs_sync_file(struct file *file, loff_t start, loff_t end, int datasync) * file again, but that will end up using the synchronization * inside btrfs_sync_log to keep things safe. */ - btrfs_inode_unlock(BTRFS_I(inode), BTRFS_ILOCK_MMAP); + if (skip_ilock) + up_write(&BTRFS_I(inode)->i_mmap_lock); + else + btrfs_inode_unlock(BTRFS_I(inode), BTRFS_ILOCK_MMAP);
if (ret == BTRFS_NO_LOG_SYNC) { ret = btrfs_end_transaction(trans);
Hi,
From: Filipe Manana fdmanana@suse.com
commit 939b656bc8ab203fdbde26ccac22bcb7f0985be5 upstream.
During an append (O_APPEND write flag) direct IO write if the input buffer was not previously faulted in, we can corrupt the file in a way that the final size is unexpected and it includes an unexpected hole.
Could we apply the patch 70f1e5b6db56ae99ede369d25d5996fa50d7bb74 btrfs: rename err to ret in btrfs_direct_write() to 6.6 stable, and then rebase this patch?
Best Regards Wang Yugui (wangyugui@e16-tech.com) 2024/08/08
On Thu, Aug 8, 2024 at 1:55 AM Wang Yugui wangyugui@e16-tech.com wrote:
Hi,
From: Filipe Manana fdmanana@suse.com
commit 939b656bc8ab203fdbde26ccac22bcb7f0985be5 upstream.
During an append (O_APPEND write flag) direct IO write if the input buffer was not previously faulted in, we can corrupt the file in a way that the final size is unexpected and it includes an unexpected hole.
Could we apply the patch 70f1e5b6db56ae99ede369d25d5996fa50d7bb74 btrfs: rename err to ret in btrfs_direct_write() to 6.6 stable, and then rebase this patch?
Why?
Generally we don't backport cleanups and refactorings, only bug fixes. Adding that patch wouldn't make the backport easier, that is, we still couldn't pick the commit from Linus' master branch without any changes, because at least the commit would fail to apply due to the move of the direct IO code into a new file, and possibly other changes too.
Best Regards Wang Yugui (wangyugui@e16-tech.com) 2024/08/08
linux-stable-mirror@lists.linaro.org