On 25/10/2021 12:45, Johan Hovold wrote:

The driver uses endpoint-sized USB transfer buffers but up until recently had no sanity checks on the sizes.

Commit e1f13c879a7c ("staging: comedi: check validity of wMaxPacketSize of usb endpoints found") inadvertently fixed NULL-pointer dereferences when accessing the transfer buffers in case a malicious device has a zero wMaxPacketSize.

Make sure to allocate buffers large enough to handle also the other accesses that are done without a size check (e.g. byte 18 in vmk80xx_cnt_insn_read() for the VMK8061_MODEL) to avoid writing beyond the buffers, for example, when doing descriptor fuzzing.

The original driver was for a low-speed device with 8-byte buffers. Support was later added for a device that uses bulk transfers and is presumably a full-speed device with a maximum 64-byte wMaxPacketSize.

Fixes: 985cafccbf9b ("Staging: Comedi: vmk80xx: Add k8061 support") Cc: stable@vger.kernel.org # 2.6.31 Signed-off-by: Johan Hovold johan@kernel.org

---

drivers/comedi/drivers/vmk80xx.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)

diff --git a/drivers/comedi/drivers/vmk80xx.c b/drivers/comedi/drivers/vmk80xx.c index 9f920819cd74..f2c1572d0cd7 100644 --- a/drivers/comedi/drivers/vmk80xx.c +++ b/drivers/comedi/drivers/vmk80xx.c @@ -90,6 +90,8 @@ enum { #define IC3_VERSION BIT(0) #define IC6_VERSION BIT(1) +#define MIN_BUF_SIZE 64

• enum vmk80xx_model { VMK8055_MODEL, VMK8061_MODEL

@@ -678,12 +680,12 @@ static int vmk80xx_alloc_usb_buffers(struct comedi_device *dev) struct vmk80xx_private *devpriv = dev->private; size_t size;

• size = usb_endpoint_maxp(devpriv->ep_rx);

• size = max(usb_endpoint_maxp(devpriv->ep_rx), MIN_BUF_SIZE); devpriv->usb_rx_buf = kzalloc(size, GFP_KERNEL); if (!devpriv->usb_rx_buf) return -ENOMEM;

• size = usb_endpoint_maxp(devpriv->ep_tx);

• size = max(usb_endpoint_maxp(devpriv->ep_rx), MIN_BUF_SIZE); devpriv->usb_tx_buf = kzalloc(size, GFP_KERNEL); if (!devpriv->usb_tx_buf) return -ENOMEM;

Looks good, thanks!

Reviewed-by: Ian Abbott abbotti@mev.co.uk