From: Andreas Gruenbacher agruenba@redhat.com
[ Upstream commit f3506eee81d1f700d9ee2d2f4a88fddb669ec032 ]
Fix the length of holes reported at the end of a file: the length is relative to the beginning of the extent, not the seek position which is rounded down to the filesystem block size.
This bug went unnoticed for some time, but is now caught by the following assertion in iomap_iter_done():
WARN_ON_ONCE(iter->iomap.offset + iter->iomap.length <= iter->pos)
Signed-off-by: Andreas Gruenbacher agruenba@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/gfs2/bmap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/gfs2/bmap.c b/fs/gfs2/bmap.c index 43f53020553b5..53ba5019ad063 100644 --- a/fs/gfs2/bmap.c +++ b/fs/gfs2/bmap.c @@ -943,7 +943,7 @@ static int gfs2_iomap_get(struct inode *inode, loff_t pos, loff_t length, else if (height == ip->i_height) ret = gfs2_hole_size(inode, lblock, len, mp, iomap); else - iomap->length = size - pos; + iomap->length = size - iomap->offset; } else if (flags & IOMAP_WRITE) { u64 alloc_size;
From: Nicolas Dichtel nicolas.dichtel@6wind.com
[ Upstream commit a31d27fbed5d518734cb60956303eb15089a7634 ]
As stated in the bonding doc, trans_start must be set manually for drivers using NETIF_F_LLTX: Drivers that use NETIF_F_LLTX flag must also update netdev_queue->trans_start. If they do not, then the ARP monitor will immediately fail any slaves using that driver, and those slaves will stay down.
Link: https://www.kernel.org/doc/html/v5.15/networking/bonding.html#arp-monitor-op... Signed-off-by: Nicolas Dichtel nicolas.dichtel@6wind.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/tun.c | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 8ee2c519c9bf0..d5bb972cbc9a6 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -1085,6 +1085,7 @@ static netdev_tx_t tun_net_xmit(struct sk_buff *skb, struct net_device *dev) { struct tun_struct *tun = netdev_priv(dev); int txq = skb->queue_mapping; + struct netdev_queue *queue; struct tun_file *tfile; int len = skb->len;
@@ -1131,6 +1132,10 @@ static netdev_tx_t tun_net_xmit(struct sk_buff *skb, struct net_device *dev) if (ptr_ring_produce(&tfile->tx_ring, skb)) goto drop;
+ /* NETIF_F_LLTX requires to do our own update of trans_start */ + queue = netdev_get_tx_queue(dev, txq); + queue->trans_start = jiffies; + /* Notify and wake up reader process */ if (tfile->flags & TUN_FASYNC) kill_fasync(&tfile->fasync, SIGIO, POLL_IN);
From: Zekun Shen bruceshenzk@gmail.com
[ Upstream commit b922f622592af76b57cbc566eaeccda0b31a3496 ]
This bug report shows up when running our research tools. The reports is SOOB read, but it seems SOOB write is also possible a few lines below.
In details, fw.len and sw.len are inputs coming from io. A len over the size of self->rpc triggers SOOB. The patch fixes the bugs by adding sanity checks.
The bugs are triggerable with compromised/malfunctioning devices. They are potentially exploitable given they first leak up to 0xffff bytes and able to overwrite the region later.
The patch is tested with QEMU emulater. This is NOT tested with a real device.
Attached is the log we found by fuzzing.
BUG: KASAN: slab-out-of-bounds in hw_atl_utils_fw_upload_dwords+0x393/0x3c0 [atlantic] Read of size 4 at addr ffff888016260b08 by task modprobe/213 CPU: 0 PID: 213 Comm: modprobe Not tainted 5.6.0 #1 Call Trace: dump_stack+0x76/0xa0 print_address_description.constprop.0+0x16/0x200 ? hw_atl_utils_fw_upload_dwords+0x393/0x3c0 [atlantic] ? hw_atl_utils_fw_upload_dwords+0x393/0x3c0 [atlantic] __kasan_report.cold+0x37/0x7c ? aq_hw_read_reg_bit+0x60/0x70 [atlantic] ? hw_atl_utils_fw_upload_dwords+0x393/0x3c0 [atlantic] kasan_report+0xe/0x20 hw_atl_utils_fw_upload_dwords+0x393/0x3c0 [atlantic] hw_atl_utils_fw_rpc_call+0x95/0x130 [atlantic] hw_atl_utils_fw_rpc_wait+0x176/0x210 [atlantic] hw_atl_utils_mpi_create+0x229/0x2e0 [atlantic] ? hw_atl_utils_fw_rpc_wait+0x210/0x210 [atlantic] ? hw_atl_utils_initfw+0x9f/0x1c8 [atlantic] hw_atl_utils_initfw+0x12a/0x1c8 [atlantic] aq_nic_ndev_register+0x88/0x650 [atlantic] ? aq_nic_ndev_init+0x235/0x3c0 [atlantic] aq_pci_probe+0x731/0x9b0 [atlantic] ? aq_pci_func_init+0xc0/0xc0 [atlantic] local_pci_probe+0xd3/0x160 pci_device_probe+0x23f/0x3e0
Reported-by: Brendan Dolan-Gavitt brendandg@nyu.edu Signed-off-by: Zekun Shen bruceshenzk@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- .../ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c index 096ec18e8f15a..49c80bac9ce28 100644 --- a/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c +++ b/drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c @@ -459,6 +459,11 @@ int hw_atl_utils_fw_rpc_wait(struct aq_hw_s *self, goto err_exit;
if (fw.len == 0xFFFFU) { + if (sw.len > sizeof(self->rpc)) { + printk(KERN_INFO "Invalid sw len: %x\n", sw.len); + err = -EINVAL; + goto err_exit; + } err = hw_atl_utils_fw_rpc_call(self, sw.len); if (err < 0) goto err_exit; @@ -469,6 +474,11 @@ int hw_atl_utils_fw_rpc_wait(struct aq_hw_s *self,
if (rpc) { if (fw.len) { + if (fw.len > sizeof(self->rpc)) { + printk(KERN_INFO "Invalid fw len: %x\n", fw.len); + err = -EINVAL; + goto err_exit; + } err = hw_atl_utils_fw_downld_dwords(self, self->rpc_addr,
From: liuguoqiang liuguoqiang@uniontech.com
[ Upstream commit 6def480181f15f6d9ec812bca8cbc62451ba314c ]
When kmemdup called failed and register_net_sysctl return NULL, should return ENOMEM instead of ENOBUFS
Signed-off-by: liuguoqiang liuguoqiang@uniontech.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/ipv4/devinet.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c index 12a2cea9d606a..e2ab8cdb71347 100644 --- a/net/ipv4/devinet.c +++ b/net/ipv4/devinet.c @@ -2354,7 +2354,7 @@ static int __devinet_sysctl_register(struct net *net, char *dev_name, free: kfree(t); out: - return -ENOBUFS; + return -ENOMEM; }
static void __devinet_sysctl_unregister(struct net *net,
From: Mario Limonciello mario.limonciello@amd.com
[ Upstream commit 2d54067fcd23aae61e23508425ae5b29e973573d ]
On some Lenovo AMD Gen2 platforms the IRQ for the SCI and pinctrl drivers are shared. Due to how the s2idle loop handling works, this case needs an extra explicit check whether the interrupt was caused by SCI or by the GPIO controller.
To fix this rework the existing IRQ handler function to function as a checker and an IRQ handler depending on the calling arguments.
BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1738 Reported-by: Joerie de Gram j.de.gram@gmail.com Signed-off-by: Mario Limonciello mario.limonciello@amd.com Acked-by: Basavaraj Natikar Basavaraj.Natikar@amd.com Link: https://lore.kernel.org/r/20211101014853.6177-2-mario.limonciello@amd.com Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pinctrl/pinctrl-amd.c | 29 ++++++++++++++++++++++++++--- 1 file changed, 26 insertions(+), 3 deletions(-)
diff --git a/drivers/pinctrl/pinctrl-amd.c b/drivers/pinctrl/pinctrl-amd.c index 8d2dbf607bd15..af8927b465ef5 100644 --- a/drivers/pinctrl/pinctrl-amd.c +++ b/drivers/pinctrl/pinctrl-amd.c @@ -530,14 +530,14 @@ static struct irq_chip amd_gpio_irqchip = {
#define PIN_IRQ_PENDING (BIT(INTERRUPT_STS_OFF) | BIT(WAKE_STS_OFF))
-static irqreturn_t amd_gpio_irq_handler(int irq, void *dev_id) +static bool do_amd_gpio_irq_handler(int irq, void *dev_id) { struct amd_gpio *gpio_dev = dev_id; struct gpio_chip *gc = &gpio_dev->gc; - irqreturn_t ret = IRQ_NONE; unsigned int i, irqnr; unsigned long flags; u32 __iomem *regs; + bool ret = false; u32 regval; u64 status, mask;
@@ -559,6 +559,14 @@ static irqreturn_t amd_gpio_irq_handler(int irq, void *dev_id) /* Each status bit covers four pins */ for (i = 0; i < 4; i++) { regval = readl(regs + i); + /* caused wake on resume context for shared IRQ */ + if (irq < 0 && (regval & BIT(WAKE_STS_OFF))) { + dev_dbg(&gpio_dev->pdev->dev, + "Waking due to GPIO %d: 0x%x", + irqnr + i, regval); + return true; + } + if (!(regval & PIN_IRQ_PENDING) || !(regval & BIT(INTERRUPT_MASK_OFF))) continue; @@ -584,9 +592,12 @@ static irqreturn_t amd_gpio_irq_handler(int irq, void *dev_id) } writel(regval, regs + i); raw_spin_unlock_irqrestore(&gpio_dev->lock, flags); - ret = IRQ_HANDLED; + ret = true; } } + /* did not cause wake on resume context for shared IRQ */ + if (irq < 0) + return false;
/* Signal EOI to the GPIO unit */ raw_spin_lock_irqsave(&gpio_dev->lock, flags); @@ -598,6 +609,16 @@ static irqreturn_t amd_gpio_irq_handler(int irq, void *dev_id) return ret; }
+static irqreturn_t amd_gpio_irq_handler(int irq, void *dev_id) +{ + return IRQ_RETVAL(do_amd_gpio_irq_handler(irq, dev_id)); +} + +static bool __maybe_unused amd_gpio_check_wake(void *dev_id) +{ + return do_amd_gpio_irq_handler(-1, dev_id); +} + static int amd_get_groups_count(struct pinctrl_dev *pctldev) { struct amd_gpio *gpio_dev = pinctrl_dev_get_drvdata(pctldev); @@ -942,6 +963,7 @@ static int amd_gpio_probe(struct platform_device *pdev) goto out2;
platform_set_drvdata(pdev, gpio_dev); + acpi_register_wakeup_handler(gpio_dev->irq, amd_gpio_check_wake, gpio_dev);
dev_dbg(&pdev->dev, "amd gpio driver loaded\n"); return ret; @@ -959,6 +981,7 @@ static int amd_gpio_remove(struct platform_device *pdev) gpio_dev = platform_get_drvdata(pdev);
gpiochip_remove(&gpio_dev->gc); + acpi_unregister_wakeup_handler(amd_gpio_check_wake, gpio_dev);
return 0; }
From: Slark Xiao slark_xiao@163.com
[ Upstream commit 39f53292181081d35174a581a98441de5da22bc9 ]
When WWAN device wake from S3 deep, under thinkpad platform, WWAN would be disabled. This disable status could be checked by command 'nmcli r wwan' or 'rfkill list'.
Issue analysis as below: When host resume from S3 deep, thinkpad_acpi driver would call hotkey_resume() function. Finnaly, it will use wan_get_status to check the current status of WWAN device. During this resume progress, wan_get_status would always return off even WWAN boot up completely. In patch V2, Hans said 'sw_state should be unchanged after a suspend/resume. It's better to drop the tpacpi_rfk_update_swstate call all together from the resume path'. And it's confimed by Lenovo that GWAN is no longer available from WHL generation because the design does not match with current pin control.
Signed-off-by: Slark Xiao slark_xiao@163.com Link: https://lore.kernel.org/r/20211108060648.8212-1-slark_xiao@163.com Reviewed-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/x86/thinkpad_acpi.c | 12 ------------ 1 file changed, 12 deletions(-)
diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 35c7d3185fea3..b8f2991581e73 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -1198,15 +1198,6 @@ static int tpacpi_rfk_update_swstate(const struct tpacpi_rfk *tp_rfk) return status; }
-/* Query FW and update rfkill sw state for all rfkill switches */ -static void tpacpi_rfk_update_swstate_all(void) -{ - unsigned int i; - - for (i = 0; i < TPACPI_RFK_SW_MAX; i++) - tpacpi_rfk_update_swstate(tpacpi_rfkill_switches[i]); -} - /* * Sync the HW-blocking state of all rfkill switches, * do notice it causes the rfkill core to schedule uevents @@ -3145,9 +3136,6 @@ static void tpacpi_send_radiosw_update(void) if (wlsw == TPACPI_RFK_RADIO_OFF) tpacpi_rfk_update_hwblock_state(true);
- /* Sync sw blocking state */ - tpacpi_rfk_update_swstate_all(); - /* Sync hw blocking state last if it is hw-unblocked */ if (wlsw == TPACPI_RFK_RADIO_ON) tpacpi_rfk_update_hwblock_state(false);
From: Vasily Gorbik gor@linux.ibm.com
[ Upstream commit 5dbc4cb4667457b0c53bcd7bff11500b3c362975 ]
There is a difference in how architectures treat "mem=" option. For some that is an amount of online memory, for s390 and x86 this is the limiting max address. Some memblock api like memblock_enforce_memory_limit() take limit argument and explicitly treat it as the size of online memory, and use __find_max_addr to convert it to an actual max address. Current s390 usage:
memblock_enforce_memory_limit(memblock_end_of_DRAM());
yields different results depending on presence of memory holes (offline memory blocks in between online memory). If there are no memory holes limit == max_addr in memblock_enforce_memory_limit() and it does trim online memory and reserved memory regions. With memory holes present it actually does nothing.
Since we already use memblock_remove() explicitly to trim online memory regions to potential limit (think mem=, kdump, addressing limits, etc.) drop the usage of memblock_enforce_memory_limit() altogether. Trimming reserved regions should not be required, since we now use memblock_set_current_limit() to limit allocations and any explicit memory reservations above the limit is an actual problem we should not hide.
Reviewed-by: Heiko Carstens hca@linux.ibm.com Signed-off-by: Vasily Gorbik gor@linux.ibm.com Signed-off-by: Heiko Carstens hca@linux.ibm.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/s390/kernel/setup.c | 3 --- 1 file changed, 3 deletions(-)
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index e8bfd29bb1f9f..098794fc5dc81 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -703,9 +703,6 @@ static void __init setup_memory(void) storage_key_init_range(reg->base, reg->base + reg->size); } psw_set_key(PAGE_DEFAULT_KEY); - - /* Only cosmetics */ - memblock_enforce_memory_limit(memblock_end_of_DRAM()); }
/*
From: Wang Yugui wangyugui@e16-tech.com
[ Upstream commit a91cf0ffbc244792e0b3ecf7d0fddb2f344b461f ]
When a disk has write caching disabled, we skip submission of a bio with flush and sync requests before writing the superblock, since it's not needed. However when the integrity checker is enabled, this results in reports that there are metadata blocks referred by a superblock that were not properly flushed. So don't skip the bio submission only when the integrity checker is enabled for the sake of simplicity, since this is a debug tool and not meant for use in non-debug builds.
fstests/btrfs/220 trigger a check-integrity warning like the following when CONFIG_BTRFS_FS_CHECK_INTEGRITY=y and the disk with WCE=0.
btrfs: attempt to write superblock which references block M @5242880 (sdb2/5242880/0) which is not flushed out of disk's write cache (block flush_gen=1, dev->flush_gen=0)! ------------[ cut here ]------------ WARNING: CPU: 28 PID: 843680 at fs/btrfs/check-integrity.c:2196 btrfsic_process_written_superblock+0x22a/0x2a0 [btrfs] CPU: 28 PID: 843680 Comm: umount Not tainted 5.15.0-0.rc5.39.el8.x86_64 #1 Hardware name: Dell Inc. Precision T7610/0NK70N, BIOS A18 09/11/2019 RIP: 0010:btrfsic_process_written_superblock+0x22a/0x2a0 [btrfs] RSP: 0018:ffffb642afb47940 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000000 RDX: 00000000ffffffff RSI: ffff8b722fc97d00 RDI: ffff8b722fc97d00 RBP: ffff8b5601c00000 R08: 0000000000000000 R09: c0000000ffff7fff R10: 0000000000000001 R11: ffffb642afb476f8 R12: ffffffffffffffff R13: ffffb642afb47974 R14: ffff8b5499254c00 R15: 0000000000000003 FS: 00007f00a06d4080(0000) GS:ffff8b722fc80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fff5cff5ff0 CR3: 00000001c0c2a006 CR4: 00000000001706e0 Call Trace: btrfsic_process_written_block+0x2f7/0x850 [btrfs] __btrfsic_submit_bio.part.19+0x310/0x330 [btrfs] ? bio_associate_blkg_from_css+0xa4/0x2c0 btrfsic_submit_bio+0x18/0x30 [btrfs] write_dev_supers+0x81/0x2a0 [btrfs] ? find_get_pages_range_tag+0x219/0x280 ? pagevec_lookup_range_tag+0x24/0x30 ? __filemap_fdatawait_range+0x6d/0xf0 ? __raw_callee_save___native_queued_spin_unlock+0x11/0x1e ? find_first_extent_bit+0x9b/0x160 [btrfs] ? __raw_callee_save___native_queued_spin_unlock+0x11/0x1e write_all_supers+0x1b3/0xa70 [btrfs] ? __raw_callee_save___native_queued_spin_unlock+0x11/0x1e btrfs_commit_transaction+0x59d/0xac0 [btrfs] close_ctree+0x11d/0x339 [btrfs] generic_shutdown_super+0x71/0x110 kill_anon_super+0x14/0x30 btrfs_kill_super+0x12/0x20 [btrfs] deactivate_locked_super+0x31/0x70 cleanup_mnt+0xb8/0x140 task_work_run+0x6d/0xb0 exit_to_user_mode_prepare+0x1f0/0x200 syscall_exit_to_user_mode+0x12/0x30 do_syscall_64+0x46/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f009f711dfb RSP: 002b:00007fff5cff7928 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6 RAX: 0000000000000000 RBX: 000055b68c6c9970 RCX: 00007f009f711dfb RDX: 0000000000000001 RSI: 0000000000000000 RDI: 000055b68c6c9b50 RBP: 0000000000000000 R08: 000055b68c6ca900 R09: 00007f009f795580 R10: 0000000000000000 R11: 0000000000000246 R12: 000055b68c6c9b50 R13: 00007f00a04bf184 R14: 0000000000000000 R15: 00000000ffffffff ---[ end trace 2c4b82abcef9eec4 ]--- S-65536(sdb2/65536/1) --> M-1064960(sdb2/1064960/1)
Reviewed-by: Filipe Manana fdmanana@gmail.com Signed-off-by: Wang Yugui wangyugui@e16-tech.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/btrfs/disk-io.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-)
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index cb21ffd3bba7c..06e5529fedfdb 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -3578,11 +3578,23 @@ static void btrfs_end_empty_barrier(struct bio *bio) */ static void write_dev_flush(struct btrfs_device *device) { - struct request_queue *q = bdev_get_queue(device->bdev); struct bio *bio = device->flush_bio;
+#ifndef CONFIG_BTRFS_FS_CHECK_INTEGRITY + /* + * When a disk has write caching disabled, we skip submission of a bio + * with flush and sync requests before writing the superblock, since + * it's not needed. However when the integrity checker is enabled, this + * results in reports that there are metadata blocks referred by a + * superblock that were not properly flushed. So don't skip the bio + * submission only when the integrity checker is enabled for the sake + * of simplicity, since this is a debug tool and not meant for use in + * non-debug builds. + */ + struct request_queue *q = bdev_get_queue(device->bdev); if (!test_bit(QUEUE_FLAG_WC, &q->queue_flags)) return; +#endif
bio_reset(bio); bio->bi_end_io = btrfs_end_empty_barrier;
From: Manaf Meethalavalappu Pallikunhi manafm@codeaurora.org
[ Upstream commit 99b63316c39988039965693f5f43d8b4ccb1c86c ]
During the suspend is in process, thermal_zone_device_update bails out thermal zone re-evaluation for any sensor trip violation without setting next valid trip to that sensor. It assumes during resume it will re-evaluate same thermal zone and update trip. But when it is in suspend temperature goes down and on resume path while updating thermal zone if temperature is less than previously violated trip, thermal zone set trip function evaluates the same previous high and previous low trip as new high and low trip. Since there is no change in high/low trip, it bails out from thermal zone set trip API without setting any trip. It leads to a case where sensor high trip or low trip is disabled forever even though thermal zone has a valid high or low trip.
During thermal zone device init, reset thermal zone previous high and low trip. It resolves above mentioned scenario.
Signed-off-by: Manaf Meethalavalappu Pallikunhi manafm@codeaurora.org Reviewed-by: Thara Gopinath thara.gopinath@linaro.org Signed-off-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/thermal/thermal_core.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index ae60599c462b9..6c7825c581b5f 100644 --- a/drivers/thermal/thermal_core.c +++ b/drivers/thermal/thermal_core.c @@ -454,6 +454,8 @@ static void thermal_zone_device_init(struct thermal_zone_device *tz) { struct thermal_instance *pos; tz->temperature = THERMAL_TEMP_INVALID; + tz->prev_low_trip = -INT_MAX; + tz->prev_high_trip = INT_MAX; list_for_each_entry(pos, &tz->thermal_instances, tz_node) pos->initialized = false; }
From: Mike Christie michael.christie@oracle.com
[ Upstream commit a0c2f8b6709a9a4af175497ca65f93804f57b248 ]
We can race where iscsi_session_recovery_timedout() has woken up the error handler thread and it's now setting the devices to offline, and session_recovery_timedout()'s call to scsi_target_unblock() is also trying to set the device's state to transport-offline. We can then get a mix of states.
For the case where we can't relogin we want the devices to be in transport-offline so when we have repaired the connection __iscsi_unblock_session() can set the state back to running.
Set the device state then call into libiscsi to wake up the error handler.
Link: https://lore.kernel.org/r/20211105221048.6541-2-michael.christie@oracle.com Reviewed-by: Lee Duncan lduncan@suse.com Signed-off-by: Mike Christie michael.christie@oracle.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/scsi_transport_iscsi.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c index c06e648a415b5..79581771e6f61 100644 --- a/drivers/scsi/scsi_transport_iscsi.c +++ b/drivers/scsi/scsi_transport_iscsi.c @@ -1892,12 +1892,12 @@ static void session_recovery_timedout(struct work_struct *work) } spin_unlock_irqrestore(&session->lock, flags);
- if (session->transport->session_recovery_timedout) - session->transport->session_recovery_timedout(session); - ISCSI_DBG_TRANS_SESSION(session, "Unblocking SCSI target\n"); scsi_target_unblock(&session->dev, SDEV_TRANSPORT_OFFLINE); ISCSI_DBG_TRANS_SESSION(session, "Completed unblocking SCSI target\n"); + + if (session->transport->session_recovery_timedout) + session->transport->session_recovery_timedout(session); }
static void __iscsi_unblock_session(struct work_struct *work)
From: Mario Limonciello mario.limonciello@amd.com
[ Upstream commit 1527f69204fe35f341cb599f1cb01bd02daf4374 ]
AMD requires that the SATA controller be configured for devsleep in order for S0i3 entry to work properly.
commit b1a9585cc396 ("ata: ahci: Enable DEVSLP by default on x86 with SLP_S0") sets up a kernel policy to enable devsleep on Intel mobile platforms that are using s0ix. Add the PCI ID for the SATA controller in Green Sardine platforms to extend this policy by default for AMD based systems using s0i3 as well.
Cc: Nehal-bakulchandra Shah Nehal-bakulchandra.Shah@amd.com BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214091 Signed-off-by: Mario Limonciello mario.limonciello@amd.com Signed-off-by: Damien Le Moal damien.lemoal@opensource.wdc.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/ata/ahci.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 8df0ec85cc7b9..505920d4530f8 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -436,6 +436,7 @@ static const struct pci_device_id ahci_pci_tbl[] = { /* AMD */ { PCI_VDEVICE(AMD, 0x7800), board_ahci }, /* AMD Hudson-2 */ { PCI_VDEVICE(AMD, 0x7900), board_ahci }, /* AMD CZ */ + { PCI_VDEVICE(AMD, 0x7901), board_ahci_mobile }, /* AMD Green Sardine */ /* AMD is using RAID class only for ahci controllers */ { PCI_VENDOR_ID_AMD, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_RAID << 8, 0xffffff, board_ahci },
From: Teng Qi starmiku1207184332@gmail.com
[ Upstream commit a66998e0fbf213d47d02813b9679426129d0d114 ]
The if statement: if (port >= DSAF_GE_NUM) return;
limits the value of port less than DSAF_GE_NUM (i.e., 8). However, if the value of port is 6 or 7, an array overflow could occur: port_rst_off = dsaf_dev->mac_cb[port]->port_rst_off;
because the length of dsaf_dev->mac_cb is DSAF_MAX_PORT_NUM (i.e., 6).
To fix this possible array overflow, we first check port and if it is greater than or equal to DSAF_MAX_PORT_NUM, the function returns.
Reported-by: TOTE Robot oslab@tsinghua.edu.cn Signed-off-by: Teng Qi starmiku1207184332@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c index 16294cd3c9545..4ceacb1c154dc 100644 --- a/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c +++ b/drivers/net/ethernet/hisilicon/hns/hns_dsaf_misc.c @@ -402,6 +402,10 @@ static void hns_dsaf_ge_srst_by_port(struct dsaf_device *dsaf_dev, u32 port, return;
if (!HNS_DSAF_IS_DEBUG(dsaf_dev)) { + /* DSAF_MAX_PORT_NUM is 6, but DSAF_GE_NUM is 8. + We need check to prevent array overflow */ + if (port >= DSAF_MAX_PORT_NUM) + return; reg_val_1 = 0x1 << port; port_rst_off = dsaf_dev->mac_cb[port]->port_rst_off; /* there is difference between V1 and V2 in register.*/
From: zhangyue zhangyue1@kylinos.cn
[ Upstream commit 61217be886b5f7402843677e4be7e7e83de9cb41 ]
In line 5001, if all id in the array 'lp->phy[8]' is not 0, when the 'for' end, the 'k' is 8.
At this time, the array 'lp->phy[8]' may be out of bound.
Signed-off-by: zhangyue zhangyue1@kylinos.cn Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/dec/tulip/de4x5.c | 30 +++++++++++++++----------- 1 file changed, 17 insertions(+), 13 deletions(-)
diff --git a/drivers/net/ethernet/dec/tulip/de4x5.c b/drivers/net/ethernet/dec/tulip/de4x5.c index c813e6f2b371e..a80252973171f 100644 --- a/drivers/net/ethernet/dec/tulip/de4x5.c +++ b/drivers/net/ethernet/dec/tulip/de4x5.c @@ -4999,19 +4999,23 @@ mii_get_phy(struct net_device *dev) } if ((j == limit) && (i < DE4X5_MAX_MII)) { for (k=0; k < DE4X5_MAX_PHY && lp->phy[k].id; k++); - lp->phy[k].addr = i; - lp->phy[k].id = id; - lp->phy[k].spd.reg = GENERIC_REG; /* ANLPA register */ - lp->phy[k].spd.mask = GENERIC_MASK; /* 100Mb/s technologies */ - lp->phy[k].spd.value = GENERIC_VALUE; /* TX & T4, H/F Duplex */ - lp->mii_cnt++; - lp->active++; - printk("%s: Using generic MII device control. If the board doesn't operate,\nplease mail the following dump to the author:\n", dev->name); - j = de4x5_debug; - de4x5_debug |= DEBUG_MII; - de4x5_dbg_mii(dev, k); - de4x5_debug = j; - printk("\n"); + if (k < DE4X5_MAX_PHY) { + lp->phy[k].addr = i; + lp->phy[k].id = id; + lp->phy[k].spd.reg = GENERIC_REG; /* ANLPA register */ + lp->phy[k].spd.mask = GENERIC_MASK; /* 100Mb/s technologies */ + lp->phy[k].spd.value = GENERIC_VALUE; /* TX & T4, H/F Duplex */ + lp->mii_cnt++; + lp->active++; + printk("%s: Using generic MII device control. If the board doesn't operate,\nplease mail the following dump to the author:\n", dev->name); + j = de4x5_debug; + de4x5_debug |= DEBUG_MII; + de4x5_dbg_mii(dev, k); + de4x5_debug = j; + printk("\n"); + } else { + goto purgatory; + } } } purgatory:
From: Teng Qi starmiku1207184332@gmail.com
[ Upstream commit 0fa68da72c3be09e06dd833258ee89c33374195f ]
The definition of macro MOTO_SROM_BUG is: #define MOTO_SROM_BUG (lp->active == 8 && (get_unaligned_le32( dev->dev_addr) & 0x00ffffff) == 0x3e0008)
and the if statement if (MOTO_SROM_BUG) lp->active = 0;
using this macro indicates lp->active could be 8. If lp->active is 8 and the second comparison of this macro is false. lp->active will remain 8 in: lp->phy[lp->active].gep = (*p ? p : NULL); p += (2 * (*p) + 1); lp->phy[lp->active].rst = (*p ? p : NULL); p += (2 * (*p) + 1); lp->phy[lp->active].mc = get_unaligned_le16(p); p += 2; lp->phy[lp->active].ana = get_unaligned_le16(p); p += 2; lp->phy[lp->active].fdx = get_unaligned_le16(p); p += 2; lp->phy[lp->active].ttm = get_unaligned_le16(p); p += 2; lp->phy[lp->active].mci = *p;
However, the length of array lp->phy is 8, so array overflows can occur. To fix these possible array overflows, we first check lp->active and then return -EINVAL if it is greater or equal to ARRAY_SIZE(lp->phy) (i.e. 8).
Reported-by: TOTE Robot oslab@tsinghua.edu.cn Signed-off-by: Teng Qi starmiku1207184332@gmail.com Reviewed-by: Arnd Bergmann arnd@arndb.de Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/dec/tulip/de4x5.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/net/ethernet/dec/tulip/de4x5.c b/drivers/net/ethernet/dec/tulip/de4x5.c index a80252973171f..c97fc0e384ca6 100644 --- a/drivers/net/ethernet/dec/tulip/de4x5.c +++ b/drivers/net/ethernet/dec/tulip/de4x5.c @@ -4708,6 +4708,10 @@ type3_infoblock(struct net_device *dev, u_char count, u_char *p) lp->ibn = 3; lp->active = *p++; if (MOTO_SROM_BUG) lp->active = 0; + /* if (MOTO_SROM_BUG) statement indicates lp->active could + * be 8 (i.e. the size of array lp->phy) */ + if (WARN_ON(lp->active >= ARRAY_SIZE(lp->phy))) + return -EINVAL; lp->phy[lp->active].gep = (*p ? p : NULL); p += (2 * (*p) + 1); lp->phy[lp->active].rst = (*p ? p : NULL); p += (2 * (*p) + 1); lp->phy[lp->active].mc = get_unaligned_le16(p); p += 2;
From: Ian Rogers irogers@google.com
[ Upstream commit 0ca1f534a776cc7d42f2c33da4732b74ec2790cd ]
perf_hpp__column_unregister() removes an entry from a list but doesn't free the memory causing a memory leak spotted by leak sanitizer.
Add the free while at the same time reducing the scope of the function to static.
Signed-off-by: Ian Rogers irogers@google.com Reviewed-by: Kajol Jain kjain@linux.ibm.com Cc: Alexander Shishkin alexander.shishkin@linux.intel.com Cc: Jiri Olsa jolsa@redhat.com Cc: Mark Rutland mark.rutland@arm.com Cc: Namhyung Kim namhyung@kernel.org Cc: Peter Zijlstra peterz@infradead.org Cc: Stephane Eranian eranian@google.com Link: http://lore.kernel.org/lkml/20211118071247.2140392-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/perf/ui/hist.c | 28 ++++++++++++++-------------- tools/perf/util/hist.h | 1 - 2 files changed, 14 insertions(+), 15 deletions(-)
diff --git a/tools/perf/ui/hist.c b/tools/perf/ui/hist.c index fe3dfaa64a916..4afb63cea41b9 100644 --- a/tools/perf/ui/hist.c +++ b/tools/perf/ui/hist.c @@ -468,6 +468,18 @@ struct perf_hpp_list perf_hpp_list = { #undef __HPP_SORT_ACC_FN #undef __HPP_SORT_RAW_FN
+static void fmt_free(struct perf_hpp_fmt *fmt) +{ + /* + * At this point fmt should be completely + * unhooked, if not it's a bug. + */ + BUG_ON(!list_empty(&fmt->list)); + BUG_ON(!list_empty(&fmt->sort_list)); + + if (fmt->free) + fmt->free(fmt); +}
void perf_hpp__init(void) { @@ -531,9 +543,10 @@ void perf_hpp_list__prepend_sort_field(struct perf_hpp_list *list, list_add(&format->sort_list, &list->sorts); }
-void perf_hpp__column_unregister(struct perf_hpp_fmt *format) +static void perf_hpp__column_unregister(struct perf_hpp_fmt *format) { list_del_init(&format->list); + fmt_free(format); }
void perf_hpp__cancel_cumulate(void) @@ -605,19 +618,6 @@ void perf_hpp__append_sort_keys(struct perf_hpp_list *list) }
-static void fmt_free(struct perf_hpp_fmt *fmt) -{ - /* - * At this point fmt should be completely - * unhooked, if not it's a bug. - */ - BUG_ON(!list_empty(&fmt->list)); - BUG_ON(!list_empty(&fmt->sort_list)); - - if (fmt->free) - fmt->free(fmt); -} - void perf_hpp__reset_output_field(struct perf_hpp_list *list) { struct perf_hpp_fmt *fmt, *tmp; diff --git a/tools/perf/util/hist.h b/tools/perf/util/hist.h index 7173e1f410930..899c1ca5e7dce 100644 --- a/tools/perf/util/hist.h +++ b/tools/perf/util/hist.h @@ -346,7 +346,6 @@ enum { };
void perf_hpp__init(void); -void perf_hpp__column_unregister(struct perf_hpp_fmt *format); void perf_hpp__cancel_cumulate(void); void perf_hpp__setup_output_field(struct perf_hpp_list *list); void perf_hpp__reset_output_field(struct perf_hpp_list *list);
linux-stable-mirror@lists.linaro.org
-
Sasha Levin