The Qualcomm LLCC/EDAC drivers were using a fixed register stride for accessing the (Control and Status Registers) CSRs of each LLCC bank. This stride only works for some SoCs like SDM845 for which driver support was initially added.
But the later SoCs use different register stride that vary between the banks with holes in-between. So it is not possible to use a single register stride for accessing the CSRs of each bank. By doing so could result in a crash.
For fixing this issue, let's obtain the base address of each LLCC bank from devicetree and get rid of the fixed stride.
Cc: stable@vger.kernel.org # 4.20 Fixes: a3134fb09e0b ("drivers: soc: Add LLCC driver") Fixes: 27450653f1db ("drivers: edac: Add EDAC driver support for QCOM SoCs") Reported-by: Parikshit Pareek quic_ppareek@quicinc.com Signed-off-by: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org --- drivers/edac/qcom_edac.c | 14 +++---- drivers/soc/qcom/llcc-qcom.c | 64 ++++++++++++++++++------------ include/linux/soc/qcom/llcc-qcom.h | 4 +- 3 files changed, 44 insertions(+), 38 deletions(-)
diff --git a/drivers/edac/qcom_edac.c b/drivers/edac/qcom_edac.c index 97a27e42dd61..70bd39a91b89 100644 --- a/drivers/edac/qcom_edac.c +++ b/drivers/edac/qcom_edac.c @@ -213,7 +213,7 @@ dump_syn_reg_values(struct llcc_drv_data *drv, u32 bank, int err_type)
for (i = 0; i < reg_data.reg_cnt; i++) { synd_reg = reg_data.synd_reg + (i * 4); - ret = regmap_read(drv->regmap, drv->offsets[bank] + synd_reg, + ret = regmap_read(drv->regmap[bank], synd_reg, &synd_val); if (ret) goto clear; @@ -222,8 +222,7 @@ dump_syn_reg_values(struct llcc_drv_data *drv, u32 bank, int err_type) reg_data.name, i, synd_val); }
- ret = regmap_read(drv->regmap, - drv->offsets[bank] + reg_data.count_status_reg, + ret = regmap_read(drv->regmap[bank], reg_data.count_status_reg, &err_cnt); if (ret) goto clear; @@ -233,8 +232,7 @@ dump_syn_reg_values(struct llcc_drv_data *drv, u32 bank, int err_type) edac_printk(KERN_CRIT, EDAC_LLCC, "%s: Error count: 0x%4x\n", reg_data.name, err_cnt);
- ret = regmap_read(drv->regmap, - drv->offsets[bank] + reg_data.ways_status_reg, + ret = regmap_read(drv->regmap[bank], reg_data.ways_status_reg, &err_ways); if (ret) goto clear; @@ -296,8 +294,7 @@ llcc_ecc_irq_handler(int irq, void *edev_ctl)
/* Iterate over the banks and look for Tag RAM or Data RAM errors */ for (i = 0; i < drv->num_banks; i++) { - ret = regmap_read(drv->regmap, - drv->offsets[i] + DRP_INTERRUPT_STATUS, + ret = regmap_read(drv->regmap[i], DRP_INTERRUPT_STATUS, &drp_error);
if (!ret && (drp_error & SB_ECC_ERROR)) { @@ -312,8 +309,7 @@ llcc_ecc_irq_handler(int irq, void *edev_ctl) if (!ret) irq_rc = IRQ_HANDLED;
- ret = regmap_read(drv->regmap, - drv->offsets[i] + TRP_INTERRUPT_0_STATUS, + ret = regmap_read(drv->regmap[i], TRP_INTERRUPT_0_STATUS, &trp_error);
if (!ret && (trp_error & SB_ECC_ERROR)) { diff --git a/drivers/soc/qcom/llcc-qcom.c b/drivers/soc/qcom/llcc-qcom.c index 23ce2f78c4ed..7264ac9993e0 100644 --- a/drivers/soc/qcom/llcc-qcom.c +++ b/drivers/soc/qcom/llcc-qcom.c @@ -62,8 +62,6 @@ #define LLCC_TRP_WRSC_CACHEABLE_EN 0x21f2c #define LLCC_TRP_ALGO_CFG8 0x21f30
-#define BANK_OFFSET_STRIDE 0x80000 - #define LLCC_VERSION_2_0_0_0 0x02000000 #define LLCC_VERSION_2_1_0_0 0x02010000 #define LLCC_VERSION_4_1_0_0 0x04010000 @@ -927,6 +925,7 @@ static int qcom_llcc_probe(struct platform_device *pdev) const struct llcc_slice_config *llcc_cfg; u32 sz; u32 version; + struct regmap *regmap;
drv_data = devm_kzalloc(dev, sizeof(*drv_data), GFP_KERNEL); if (!drv_data) { @@ -934,12 +933,46 @@ static int qcom_llcc_probe(struct platform_device *pdev) goto err; }
- drv_data->regmap = qcom_llcc_init_mmio(pdev, "llcc_base"); - if (IS_ERR(drv_data->regmap)) { - ret = PTR_ERR(drv_data->regmap); + /* Initialize the first LLCC bank regmap */ + regmap = qcom_llcc_init_mmio(pdev, "llcc0_base"); + if (IS_ERR(regmap)) { + ret = PTR_ERR(regmap); + goto err; + } + + cfg = of_device_get_match_data(&pdev->dev); + + ret = regmap_read(regmap, cfg->reg_offset[LLCC_COMMON_STATUS0], + &num_banks); + if (ret) + goto err; + + num_banks &= LLCC_LB_CNT_MASK; + num_banks >>= LLCC_LB_CNT_SHIFT; + drv_data->num_banks = num_banks; + + drv_data->regmap = devm_kcalloc(dev, num_banks, sizeof(*drv_data->regmap), GFP_KERNEL); + if (!drv_data->regmap) { + ret = -ENOMEM; goto err; }
+ drv_data->regmap[0] = regmap; + + /* Initialize rest of LLCC bank regmaps */ + for (i = 1; i < num_banks; i++) { + char *base = kasprintf(GFP_KERNEL, "llcc%d_base", i); + + drv_data->regmap[i] = qcom_llcc_init_mmio(pdev, base); + if (IS_ERR(drv_data->regmap[i])) { + ret = PTR_ERR(drv_data->regmap[i]); + kfree(base); + goto err; + } + + kfree(base); + } + drv_data->bcast_regmap = qcom_llcc_init_mmio(pdev, "llcc_broadcast_base"); if (IS_ERR(drv_data->bcast_regmap)) { @@ -947,8 +980,6 @@ static int qcom_llcc_probe(struct platform_device *pdev) goto err; }
- cfg = of_device_get_match_data(&pdev->dev); - /* Extract version of the IP */ ret = regmap_read(drv_data->bcast_regmap, cfg->reg_offset[LLCC_COMMON_HW_INFO], &version); @@ -957,15 +988,6 @@ static int qcom_llcc_probe(struct platform_device *pdev)
drv_data->version = version;
- ret = regmap_read(drv_data->regmap, cfg->reg_offset[LLCC_COMMON_STATUS0], - &num_banks); - if (ret) - goto err; - - num_banks &= LLCC_LB_CNT_MASK; - num_banks >>= LLCC_LB_CNT_SHIFT; - drv_data->num_banks = num_banks; - llcc_cfg = cfg->sct_data; sz = cfg->size;
@@ -973,16 +995,6 @@ static int qcom_llcc_probe(struct platform_device *pdev) if (llcc_cfg[i].slice_id > drv_data->max_slices) drv_data->max_slices = llcc_cfg[i].slice_id;
- drv_data->offsets = devm_kcalloc(dev, num_banks, sizeof(u32), - GFP_KERNEL); - if (!drv_data->offsets) { - ret = -ENOMEM; - goto err; - } - - for (i = 0; i < num_banks; i++) - drv_data->offsets[i] = i * BANK_OFFSET_STRIDE; - drv_data->bitmap = devm_bitmap_zalloc(dev, drv_data->max_slices, GFP_KERNEL); if (!drv_data->bitmap) { diff --git a/include/linux/soc/qcom/llcc-qcom.h b/include/linux/soc/qcom/llcc-qcom.h index ad1fd718169d..4b8bf585f9ba 100644 --- a/include/linux/soc/qcom/llcc-qcom.h +++ b/include/linux/soc/qcom/llcc-qcom.h @@ -129,12 +129,11 @@ struct llcc_edac_reg_offset { * @max_slices: max slices as read from device tree * @num_banks: Number of llcc banks * @bitmap: Bit map to track the active slice ids - * @offsets: Pointer to the bank offsets array * @ecc_irq: interrupt for llcc cache error detection and reporting * @version: Indicates the LLCC version */ struct llcc_drv_data { - struct regmap *regmap; + struct regmap **regmap; struct regmap *bcast_regmap; const struct llcc_slice_config *cfg; const struct llcc_edac_reg_offset *edac_reg_offset; @@ -143,7 +142,6 @@ struct llcc_drv_data { u32 max_slices; u32 num_banks; unsigned long *bitmap; - u32 *offsets; int ecc_irq; u32 version; };
On Wed, Dec 07, 2022 at 07:29:22PM +0530, Manivannan Sadhasivam wrote:
The Qualcomm LLCC/EDAC drivers were using a fixed register stride for accessing the (Control and Status Registers) CSRs of each LLCC bank. This stride only works for some SoCs like SDM845 for which driver support was initially added.
But the later SoCs use different register stride that vary between the banks with holes in-between. So it is not possible to use a single register stride for accessing the CSRs of each bank. By doing so could result in a crash.
For fixing this issue, let's obtain the base address of each LLCC bank from devicetree and get rid of the fixed stride.
Cc: stable@vger.kernel.org # 4.20 Fixes: a3134fb09e0b ("drivers: soc: Add LLCC driver") Fixes: 27450653f1db ("drivers: edac: Add EDAC driver support for QCOM SoCs") Reported-by: Parikshit Pareek quic_ppareek@quicinc.com Signed-off-by: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org
drivers/edac/qcom_edac.c | 14 +++---- drivers/soc/qcom/llcc-qcom.c | 64 ++++++++++++++++++------------ include/linux/soc/qcom/llcc-qcom.h | 4 +- 3 files changed, 44 insertions(+), 38 deletions(-)
diff --git a/drivers/edac/qcom_edac.c b/drivers/edac/qcom_edac.c index 97a27e42dd61..70bd39a91b89 100644 --- a/drivers/edac/qcom_edac.c +++ b/drivers/edac/qcom_edac.c @@ -213,7 +213,7 @@ dump_syn_reg_values(struct llcc_drv_data *drv, u32 bank, int err_type) for (i = 0; i < reg_data.reg_cnt; i++) { synd_reg = reg_data.synd_reg + (i * 4);
ret = regmap_read(drv->regmap, drv->offsets[bank] + synd_reg,
ret = regmap_read(drv->regmap[bank], synd_reg, &synd_val);@@ -222,8 +222,7 @@ dump_syn_reg_values(struct llcc_drv_data *drv, u32 bank, int err_type) reg_data.name, i, synd_val); }
- ret = regmap_read(drv->regmap,
drv->offsets[bank] + reg_data.count_status_reg,
- ret = regmap_read(drv->regmap[bank], reg_data.count_status_reg, &err_cnt); if (ret) goto clear;
@@ -233,8 +232,7 @@ dump_syn_reg_values(struct llcc_drv_data *drv, u32 bank, int err_type) edac_printk(KERN_CRIT, EDAC_LLCC, "%s: Error count: 0x%4x\n", reg_data.name, err_cnt);
- ret = regmap_read(drv->regmap,
drv->offsets[bank] + reg_data.ways_status_reg,
- ret = regmap_read(drv->regmap[bank], reg_data.ways_status_reg, &err_ways); if (ret) goto clear;
@@ -296,8 +294,7 @@ llcc_ecc_irq_handler(int irq, void *edev_ctl) /* Iterate over the banks and look for Tag RAM or Data RAM errors */ for (i = 0; i < drv->num_banks; i++) {
ret = regmap_read(drv->regmap,drv->offsets[i] + DRP_INTERRUPT_STATUS,
ret = regmap_read(drv->regmap[i], DRP_INTERRUPT_STATUS, &drp_error);if (!ret && (drp_error & SB_ECC_ERROR)) { @@ -312,8 +309,7 @@ llcc_ecc_irq_handler(int irq, void *edev_ctl) if (!ret) irq_rc = IRQ_HANDLED;
ret = regmap_read(drv->regmap,drv->offsets[i] + TRP_INTERRUPT_0_STATUS,
ret = regmap_read(drv->regmap[i], TRP_INTERRUPT_0_STATUS, &trp_error);if (!ret && (trp_error & SB_ECC_ERROR)) { diff --git a/drivers/soc/qcom/llcc-qcom.c b/drivers/soc/qcom/llcc-qcom.c index 23ce2f78c4ed..7264ac9993e0 100644 --- a/drivers/soc/qcom/llcc-qcom.c +++ b/drivers/soc/qcom/llcc-qcom.c @@ -62,8 +62,6 @@ #define LLCC_TRP_WRSC_CACHEABLE_EN 0x21f2c #define LLCC_TRP_ALGO_CFG8 0x21f30 -#define BANK_OFFSET_STRIDE 0x80000
#define LLCC_VERSION_2_0_0_0 0x02000000 #define LLCC_VERSION_2_1_0_0 0x02010000 #define LLCC_VERSION_4_1_0_0 0x04010000 @@ -927,6 +925,7 @@ static int qcom_llcc_probe(struct platform_device *pdev) const struct llcc_slice_config *llcc_cfg; u32 sz; u32 version;
- struct regmap *regmap;
drv_data = devm_kzalloc(dev, sizeof(*drv_data), GFP_KERNEL); if (!drv_data) { @@ -934,12 +933,46 @@ static int qcom_llcc_probe(struct platform_device *pdev) goto err; }
- drv_data->regmap = qcom_llcc_init_mmio(pdev, "llcc_base");
- if (IS_ERR(drv_data->regmap)) {
ret = PTR_ERR(drv_data->regmap);
- /* Initialize the first LLCC bank regmap */
- regmap = qcom_llcc_init_mmio(pdev, "llcc0_base");
- if (IS_ERR(regmap)) {
ret = PTR_ERR(regmap);goto err;- }
- cfg = of_device_get_match_data(&pdev->dev);
- ret = regmap_read(regmap, cfg->reg_offset[LLCC_COMMON_STATUS0],
&num_banks);
Don't be afraid of leaving this line unwrapped.
There's a few lines changed above that would be easier to read if allowed beyond 80 chars as well.
- if (ret)
goto err;- num_banks &= LLCC_LB_CNT_MASK;
- num_banks >>= LLCC_LB_CNT_SHIFT;
- drv_data->num_banks = num_banks;
- drv_data->regmap = devm_kcalloc(dev, num_banks, sizeof(*drv_data->regmap), GFP_KERNEL);
- if (!drv_data->regmap) {
ret = -ENOMEM;
- drv_data->regmap[0] = regmap;
- /* Initialize rest of LLCC bank regmaps */
- for (i = 1; i < num_banks; i++) {
char *base = kasprintf(GFP_KERNEL, "llcc%d_base", i);
As mentioned in the binding, I think you should obtain the regions by index instead of name.
drv_data->regmap[i] = qcom_llcc_init_mmio(pdev, base);if (IS_ERR(drv_data->regmap[i])) {ret = PTR_ERR(drv_data->regmap[i]);kfree(base);goto err;}kfree(base);- }
- drv_data->bcast_regmap = qcom_llcc_init_mmio(pdev, "llcc_broadcast_base"); if (IS_ERR(drv_data->bcast_regmap)) {
@@ -947,8 +980,6 @@ static int qcom_llcc_probe(struct platform_device *pdev) goto err; }
- cfg = of_device_get_match_data(&pdev->dev);
- /* Extract version of the IP */ ret = regmap_read(drv_data->bcast_regmap, cfg->reg_offset[LLCC_COMMON_HW_INFO], &version);
@@ -957,15 +988,6 @@ static int qcom_llcc_probe(struct platform_device *pdev) drv_data->version = version;
- ret = regmap_read(drv_data->regmap, cfg->reg_offset[LLCC_COMMON_STATUS0],
&num_banks);- if (ret)
goto err;- num_banks &= LLCC_LB_CNT_MASK;
- num_banks >>= LLCC_LB_CNT_SHIFT;
- drv_data->num_banks = num_banks;
- llcc_cfg = cfg->sct_data; sz = cfg->size;
@@ -973,16 +995,6 @@ static int qcom_llcc_probe(struct platform_device *pdev) if (llcc_cfg[i].slice_id > drv_data->max_slices) drv_data->max_slices = llcc_cfg[i].slice_id;
- drv_data->offsets = devm_kcalloc(dev, num_banks, sizeof(u32),
GFP_KERNEL);- if (!drv_data->offsets) {
ret = -ENOMEM;goto err;- }
- for (i = 0; i < num_banks; i++)
drv_data->offsets[i] = i * BANK_OFFSET_STRIDE;- drv_data->bitmap = devm_bitmap_zalloc(dev, drv_data->max_slices, GFP_KERNEL); if (!drv_data->bitmap) {
diff --git a/include/linux/soc/qcom/llcc-qcom.h b/include/linux/soc/qcom/llcc-qcom.h index ad1fd718169d..4b8bf585f9ba 100644 --- a/include/linux/soc/qcom/llcc-qcom.h +++ b/include/linux/soc/qcom/llcc-qcom.h @@ -129,12 +129,11 @@ struct llcc_edac_reg_offset {
Please also update @regmap description.
- @max_slices: max slices as read from device tree
- @num_banks: Number of llcc banks
- @bitmap: Bit map to track the active slice ids
*/
- @offsets: Pointer to the bank offsets array
- @ecc_irq: interrupt for llcc cache error detection and reporting
- @version: Indicates the LLCC version
struct llcc_drv_data {
- struct regmap *regmap;
- struct regmap **regmap;
How about making this plural, to reflect that it's now a set of regmaps?
Regards, Bjorn
struct regmap *bcast_regmap; const struct llcc_slice_config *cfg; const struct llcc_edac_reg_offset *edac_reg_offset; @@ -143,7 +142,6 @@ struct llcc_drv_data { u32 max_slices; u32 num_banks; unsigned long *bitmap;
- u32 *offsets; int ecc_irq; u32 version;
};
2.25.1
linux-stable-mirror@lists.linaro.org
-
Bjorn Andersson -
Manivannan Sadhasivam