3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Takashi Iwai tiwai@suse.de

commit 67a01afaf3d34893cf7d2ea19b34555d6abb7cb0 upstream.

The aloop driver tries to stop the pending timer via timer_del() in the trigger callback and in the close callback. The former is correct, as it's an atomic operation, while the latter expects that the timer gets really removed and proceeds the resource releases after that. But timer_del() doesn't synchronize, hence the running timer may still access the released resources.

A similar situation can be also seen in the prepare callback after trigger(STOP) where the prepare tries to re-initialize the things while a timer is still running.

The problems like the above are seen indirectly in some syzkaller reports (although it's not 100% clear whether this is the only cause, as the race condition is quite narrow and not always easy to trigger).

For addressing these issues, this patch adds the explicit alls of timer_del_sync() in some places, so that the pending timer is properly killed / synced.

Cc: stable@vger.kernel.org Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- sound/drivers/aloop.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/sound/drivers/aloop.c +++ b/sound/drivers/aloop.c @@ -193,6 +193,11 @@ static inline void loopback_timer_stop(s dpcm->timer.expires = 0; }

+static inline void loopback_timer_stop_sync(struct loopback_pcm *dpcm) +{ + del_timer_sync(&dpcm->timer); +} + #define CABLE_VALID_PLAYBACK (1 << SNDRV_PCM_STREAM_PLAYBACK) #define CABLE_VALID_CAPTURE (1 << SNDRV_PCM_STREAM_CAPTURE) #define CABLE_VALID_BOTH (CABLE_VALID_PLAYBACK|CABLE_VALID_CAPTURE) @@ -327,6 +332,8 @@ static int loopback_prepare(struct snd_p struct loopback_cable *cable = dpcm->cable; int bps, salign;

+ loopback_timer_stop_sync(dpcm); + salign = (snd_pcm_format_width(runtime->format) * runtime->channels) / 8; bps = salign * runtime->rate; @@ -746,7 +753,7 @@ static int loopback_close(struct snd_pcm struct loopback *loopback = substream->private_data; struct loopback_pcm *dpcm = substream->runtime->private_data;

- loopback_timer_stop(dpcm); + loopback_timer_stop_sync(dpcm); mutex_lock(&loopback->cable_lock); free_cable(substream); mutex_unlock(&loopback->cable_lock);

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Biggers ebiggers@google.com

commit 058f58e235cbe03e923b30ea7c49995a46a8725f upstream.

syzkaller reported a crash in ata_bmdma_fill_sg() when writing to /dev/sg1. The immediate cause was that the ATA command's scatterlist was not DMA-mapped, which causes 'pi - 1' to underflow, resulting in a write to 'qc->ap->bmdma_prd[0xffffffff]'.

Strangely though, the flag ATA_QCFLAG_DMAMAP was set in qc->flags. The root cause is that when __ata_scsi_queuecmd() is preparing to relay a SCSI command to an ATAPI device, it doesn't correctly validate the CDB length before copying it into the 16-byte buffer 'cdb' in 'struct ata_queued_cmd'. Namely, it validates the fixed CDB length expected based on the SCSI opcode but not the actual CDB length, which can be larger due to the use of the SG_NEXT_CMD_LEN ioctl. Since 'flags' is the next member in ata_queued_cmd, a buffer overflow corrupts it.

Fix it by requiring that the actual CDB length be <= 16 (ATAPI_CDB_LEN).

[Really it seems the length should be required to be <= dev->cdb_len, but the current behavior seems to have been intentionally introduced by commit 607126c2a21c ("libata-scsi: be tolerant of 12-byte ATAPI commands in 16-byte CDBs") to work around a userspace bug in mplayer. Probably the workaround is no longer needed (mplayer was fixed in 2007), but continuing to allow lengths to up 16 appears harmless for now.]

Here's a reproducer that works in QEMU when /dev/sg1 refers to the CD-ROM drive that qemu-system-x86_64 creates by default:

#include <fcntl.h> #include <sys/ioctl.h> #include <unistd.h>

#define SG_NEXT_CMD_LEN 0x2283

int main() { char buf[53] = { [36] = 0x7e, [52] = 0x02 }; int fd = open("/dev/sg1", O_RDWR); ioctl(fd, SG_NEXT_CMD_LEN, &(int){ 17 }); write(fd, buf, sizeof(buf)); }

The crash was:

BUG: unable to handle kernel paging request at ffff8cb97db37ffc IP: ata_bmdma_fill_sg drivers/ata/libata-sff.c:2623 [inline] IP: ata_bmdma_qc_prep+0xa4/0xc0 drivers/ata/libata-sff.c:2727 PGD fb6c067 P4D fb6c067 PUD 0 Oops: 0002 [#1] SMP CPU: 1 PID: 150 Comm: syz_ata_bmdma_q Not tainted 4.15.0-next-20180202 #99 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-20171110_100015-anatol 04/01/2014 [...] Call Trace: ata_qc_issue+0x100/0x1d0 drivers/ata/libata-core.c:5421 ata_scsi_translate+0xc9/0x1a0 drivers/ata/libata-scsi.c:2024 __ata_scsi_queuecmd drivers/ata/libata-scsi.c:4326 [inline] ata_scsi_queuecmd+0x8c/0x210 drivers/ata/libata-scsi.c:4375 scsi_dispatch_cmd+0xa2/0xe0 drivers/scsi/scsi_lib.c:1727 scsi_request_fn+0x24c/0x530 drivers/scsi/scsi_lib.c:1865 __blk_run_queue_uncond block/blk-core.c:412 [inline] __blk_run_queue+0x3a/0x60 block/blk-core.c:432 blk_execute_rq_nowait+0x93/0xc0 block/blk-exec.c:78 sg_common_write.isra.7+0x272/0x5a0 drivers/scsi/sg.c:806 sg_write+0x1ef/0x340 drivers/scsi/sg.c:677 __vfs_write+0x31/0x160 fs/read_write.c:480 vfs_write+0xa7/0x160 fs/read_write.c:544 SYSC_write fs/read_write.c:589 [inline] SyS_write+0x4d/0xc0 fs/read_write.c:581 do_syscall_64+0x5e/0x110 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x21/0x86

Fixes: 607126c2a21c ("libata-scsi: be tolerant of 12-byte ATAPI commands in 16-byte CDBs") Reported-by: syzbot+1ff6f9fcc3c35f1c72a95e26528c8e7e3276e4da@syzkaller.appspotmail.com Cc: stable@vger.kernel.org # v2.6.24+ Signed-off-by: Eric Biggers ebiggers@google.com Signed-off-by: Tejun Heo tj@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/ata/libata-scsi.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -3429,7 +3429,9 @@ static inline int __ata_scsi_queuecmd(st if (likely((scsi_op != ATA_16) || !atapi_passthru16)) { /* relay SCSI command to ATAPI device */ int len = COMMAND_SIZE(scsi_op); - if (unlikely(len > scmd->cmd_len || len > dev->cdb_len)) + if (unlikely(len > scmd->cmd_len || + len > dev->cdb_len || + scmd->cmd_len > ATAPI_CDB_LEN)) goto bad_cdb_len;

xlat_func = atapi_xlat;

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Hans de Goede hdegoede@redhat.com

commit 9c7be59fc519af9081c46c48f06f2b8fadf55ad8 upstream.

Various people have reported the Crucial MX100 512GB model not working with LPM set to min_power. I've now received a report that it also does not work with the new med_power_with_dipm level.

It does work with medium_power, but that has no measurable power-savings and given the amount of people being bitten by the other levels not working, this commit just disables LPM altogether.

Note all reporters of this have either the 512GB model (max capacity), or are not specifying their SSD's size. So for now this quirk assumes this is a problem with the 512GB model only.

Buglink: https://bugzilla.kernel.org/show_bug.cgi?id=89261 Buglink: https://github.com/linrunner/TLP/issues/84 Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Tejun Heo tj@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/ata/libata-core.c | 5 +++++ 1 file changed, 5 insertions(+)

--- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4225,6 +4225,11 @@ static const struct ata_blacklist_entry { "PIONEER DVD-RW DVR-212D", NULL, ATA_HORKAGE_NOSETXFER }, { "PIONEER DVD-RW DVR-216D", NULL, ATA_HORKAGE_NOSETXFER },

+ /* The 512GB version of the MX100 has both queued TRIM and LPM issues */ + { "Crucial_CT512MX100*", NULL, ATA_HORKAGE_NO_NCQ_TRIM | + ATA_HORKAGE_ZERO_AFTER_TRIM | + ATA_HORKAGE_NOLPM, }, + /* devices that don't properly handle queued TRIM commands */ { "Micron_M500_*", NULL, ATA_HORKAGE_NO_NCQ_TRIM | ATA_HORKAGE_ZERO_AFTER_TRIM, },

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ju Hyung Park qkrwngud825@gmail.com

commit ca6bfcb2f6d9deab3924bf901e73622a94900473 upstream.

Samsung explicitly states that queued TRIM is supported for Linux with 860 PRO and 860 EVO.

Make the previous blacklist to cover only 840 and 850 series.

Signed-off-by: Park Ju Hyung qkrwngud825@gmail.com Reviewed-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Tejun Heo tj@kernel.org Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/ata/libata-core.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)

--- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4244,7 +4244,9 @@ static const struct ata_blacklist_entry ATA_HORKAGE_ZERO_AFTER_TRIM, }, { "Crucial_CT*MX100*", "MU01", ATA_HORKAGE_NO_NCQ_TRIM | ATA_HORKAGE_ZERO_AFTER_TRIM, }, - { "Samsung SSD 8*", NULL, ATA_HORKAGE_NO_NCQ_TRIM | + { "Samsung SSD 840*", NULL, ATA_HORKAGE_NO_NCQ_TRIM | + ATA_HORKAGE_ZERO_AFTER_TRIM, }, + { "Samsung SSD 850*", NULL, ATA_HORKAGE_NO_NCQ_TRIM | ATA_HORKAGE_ZERO_AFTER_TRIM, }, { "FCCT*M500*", NULL, ATA_HORKAGE_NO_NCQ_TRIM | ATA_HORKAGE_ZERO_AFTER_TRIM, },

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Hans de Goede hdegoede@redhat.com

commit 3bf7b5d6d017c27e0d3b160aafb35a8e7cfeda1f upstream.

Commit b17e5729a630 ("libata: disable LPM for Crucial BX100 SSD 500GB drive"), introduced a ATA_HORKAGE_NOLPM quirk for Crucial BX100 500GB SSDs but limited this to the MU02 firmware version, according to: http://www.crucial.com/usa/en/support-ssd-firmware

MU02 is the last version, so there are no newer possibly fixed versions and if the MU02 version has broken LPM then the MU01 almost certainly also has broken LPM, so this commit changes the quirk to apply to all firmware versions.

Fixes: b17e5729a630 ("libata: disable LPM for Crucial BX100 SSD 500GB...") Cc: stable@vger.kernel.org Cc: Kai-Heng Feng kai.heng.feng@canonical.com Signed-off-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Tejun Heo tj@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/ata/libata-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4226,7 +4226,7 @@ static const struct ata_blacklist_entry { "PIONEER DVD-RW DVR-216D", NULL, ATA_HORKAGE_NOSETXFER },

/* Crucial BX100 SSD 500GB has broken LPM support */ - { "CT500BX100SSD1", "MU02", ATA_HORKAGE_NOLPM }, + { "CT500BX100SSD1", NULL, ATA_HORKAGE_NOLPM },

/* The 512GB version of the MX100 has both queued TRIM and LPM issues */ { "Crucial_CT512MX100*", NULL, ATA_HORKAGE_NO_NCQ_TRIM |

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Greg Kroah-Hartman gregkh@linuxfoundation.org

commit 3b82a4db8eaccce735dffd50b4d4e1578099b8e8 upstream.

The memmap options sent to the udl framebuffer driver were not being checked for all sets of possible crazy values. Fix this up by properly bounding the allowed values.

Reported-by: Eyal Itkin eyalit@checkpoint.com Cc: stable stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Daniel Vetter daniel.vetter@ffwll.ch Link: https://patchwork.freedesktop.org/patch/msgid/20180321154553.GA18454@kroah.c... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/gpu/drm/udl/udl_fb.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)

--- a/drivers/gpu/drm/udl/udl_fb.c +++ b/drivers/gpu/drm/udl/udl_fb.c @@ -256,10 +256,15 @@ static int udl_fb_mmap(struct fb_info *i { unsigned long start = vma->vm_start; unsigned long size = vma->vm_end - vma->vm_start; - unsigned long offset = vma->vm_pgoff << PAGE_SHIFT; + unsigned long offset; unsigned long page, pos;

- if (offset + size > info->fix.smem_len) + if (vma->vm_pgoff > (~0UL >> PAGE_SHIFT)) + return -EINVAL; + + offset = vma->vm_pgoff << PAGE_SHIFT; + + if (offset > info->fix.smem_len || size > info->fix.smem_len - offset) return -EINVAL;

pos = (unsigned long)info->fix.smem_start + offset;

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Masami Hiramatsu mhiramat@kernel.org

commit c5d343b6b7badd1f5fe0873eff2e8d63a193e732 upstream.

In Documentation/trace/kprobetrace.txt, it says

@SYM[+|-offs] : Fetch memory at SYM +|- offs (SYM should be a data symbol)

However, the parser doesn't parse minus offset correctly, since commit 2fba0c8867af ("tracing/kprobes: Fix probe offset to be unsigned") drops minus ("-") offset support for kprobe probe address usage.

This fixes the traceprobe_split_symbol_offset() to parse minus offset again with checking the offset range, and add a minus offset check in kprobe probe address usage.

Link: http://lkml.kernel.org/r/152129028983.31874.13419301530285775521.stgit@devbo...

Cc: Ingo Molnar mingo@redhat.com Cc: Tom Zanussi tom.zanussi@linux.intel.com Cc: Arnaldo Carvalho de Melo acme@kernel.org Cc: Ravi Bangoria ravi.bangoria@linux.vnet.ibm.com Cc: stable@vger.kernel.org Fixes: 2fba0c8867af ("tracing/kprobes: Fix probe offset to be unsigned") Acked-by: Namhyung Kim namhyung@kernel.org Signed-off-by: Masami Hiramatsu mhiramat@kernel.org Signed-off-by: Steven Rostedt (VMware) rostedt@goodmis.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- kernel/trace/trace_kprobe.c | 4 ++-- kernel/trace/trace_probe.c | 8 +++----- kernel/trace/trace_probe.h | 2 +- 3 files changed, 6 insertions(+), 8 deletions(-)

--- a/kernel/trace/trace_kprobe.c +++ b/kernel/trace/trace_kprobe.c @@ -611,7 +611,7 @@ static int create_trace_kprobe(int argc, bool is_return = false, is_delete = false; char *symbol = NULL, *event = NULL, *group = NULL; char *arg; - unsigned long offset = 0; + long offset = 0; void *addr = NULL; char buf[MAX_EVENT_NAME_LEN];

@@ -679,7 +679,7 @@ static int create_trace_kprobe(int argc, symbol = argv[1]; /* TODO: support .init module functions */ ret = traceprobe_split_symbol_offset(symbol, &offset); - if (ret) { + if (ret || offset < 0 || offset > UINT_MAX) { pr_info("Failed to parse either an address or a symbol.\n"); return ret; } --- a/kernel/trace/trace_probe.c +++ b/kernel/trace/trace_probe.c @@ -291,7 +291,7 @@ static fetch_func_t get_fetch_size_funct }

/* Split symbol and offset. */ -int traceprobe_split_symbol_offset(char *symbol, unsigned long *offset) +int traceprobe_split_symbol_offset(char *symbol, long *offset) { char *tmp; int ret; @@ -299,13 +299,11 @@ int traceprobe_split_symbol_offset(char if (!offset) return -EINVAL;

- tmp = strchr(symbol, '+'); + tmp = strpbrk(symbol, "+-"); if (tmp) { - /* skip sign because kstrtoul doesn't accept '+' */ - ret = kstrtoul(tmp + 1, 0, offset); + ret = kstrtol(tmp, 0, offset); if (ret) return ret; - *tmp = '\0'; } else *offset = 0; --- a/kernel/trace/trace_probe.h +++ b/kernel/trace/trace_probe.h @@ -341,7 +341,7 @@ extern int traceprobe_conflict_field_nam extern void traceprobe_update_arg(struct probe_arg *arg); extern void traceprobe_free_probe_arg(struct probe_arg *arg);

-extern int traceprobe_split_symbol_offset(char *symbol, unsigned long *offset); +extern int traceprobe_split_symbol_offset(char *symbol, long *offset);

extern ssize_t traceprobe_probes_write(struct file *file, const char __user *buffer, size_t count, loff_t *ppos,

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Andri Yngvason andri.yngvason@marel.com

commit f4353daf4905c0099fd25fa742e2ffd4a4bab26a upstream.

This has been reported to cause stalls on rt-linux.

Suggested-by: Richard Weinberger richard@nod.at Tested-by: Richard Weinberger richard@nod.at Signed-off-by: Andri Yngvason andri.yngvason@marel.com Cc: linux-stable stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde mkl@pengutronix.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/net/can/cc770/cc770.c | 15 --------------- 1 file changed, 15 deletions(-)

--- a/drivers/net/can/cc770/cc770.c +++ b/drivers/net/can/cc770/cc770.c @@ -447,15 +447,6 @@ static netdev_tx_t cc770_start_xmit(stru

stats->tx_bytes += dlc;

- - /* - * HM: We had some cases of repeated IRQs so make sure the - * INT is acknowledged I know it's already further up, but - * doing again fixed the issue - */ - cc770_write_reg(priv, msgobj[mo].ctrl0, - MSGVAL_UNC | TXIE_UNC | RXIE_UNC | INTPND_RES); - return NETDEV_TX_OK; }

@@ -683,12 +674,6 @@ static void cc770_tx_interrupt(struct ne /* Nothing more to send, switch off interrupts */ cc770_write_reg(priv, msgobj[mo].ctrl0, MSGVAL_RES | TXIE_RES | RXIE_RES | INTPND_RES); - /* - * We had some cases of repeated IRQ so make sure the - * INT is acknowledged - */ - cc770_write_reg(priv, msgobj[mo].ctrl0, - MSGVAL_UNC | TXIE_UNC | RXIE_UNC | INTPND_RES);

stats->tx_packets++; can_get_echo_skb(dev, 0);

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Andri Yngvason andri.yngvason@marel.com

commit 9ffd7503944ec7c0ef41c3245d1306c221aef2be upstream.

This fixes use after free introduced by the last cc770 patch.

Signed-off-by: Andri Yngvason andri.yngvason@marel.com Fixes: 746201235b3f ("can: cc770: Fix queue stall & dropped RTR reply") Cc: linux-stable stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde mkl@pengutronix.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/net/can/cc770/cc770.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)

--- a/drivers/net/can/cc770/cc770.c +++ b/drivers/net/can/cc770/cc770.c @@ -705,13 +705,12 @@ static void cc770_tx_interrupt(struct ne return; }

- can_put_echo_skb(priv->tx_skb, dev, 0); - can_get_echo_skb(dev, 0); - cf = (struct can_frame *)priv->tx_skb->data; stats->tx_bytes += cf->can_dlc; stats->tx_packets++;

+ can_put_echo_skb(priv->tx_skb, dev, 0); + can_get_echo_skb(dev, 0); priv->tx_skb = NULL;

netif_wake_queue(dev);

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Linus Torvalds torvalds@linux-foundation.org

commit 32d43cd391bacb5f0814c2624399a5dad3501d09 upstream.

The undocumented 'icebp' instruction (aka 'int1') works pretty much like 'int3' in the absense of in-circuit probing equipment (except, obviously, that it raises #DB instead of raising #BP), and is used by some validation test-suites as such.

But Andy Lutomirski noticed that his test suite acted differently in kvm than on bare hardware.

The reason is that kvm used an inexact test for the icebp instruction: it just assumed that an all-zero VM exit qualification value meant that the VM exit was due to icebp.

That is not unlike the guess that do_debug() does for the actual exception handling case, but it's purely a heuristic, not an absolute rule. do_debug() does it because it wants to ascribe _some_ reasons to the #DB that happened, and an empty %dr6 value means that 'icebp' is the most likely casue and we have no better information.

But kvm can just do it right, because unlike the do_debug() case, kvm actually sees the real reason for the #DB in the VM-exit interruption information field.

So instead of relying on an inexact heuristic, just use the actual VM exit information that says "it was 'icebp'".

Right now the 'icebp' instruction isn't technically documented by Intel, but that will hopefully change. The special "privileged software exception" information _is_ actually mentioned in the Intel SDM, even though the cause of it isn't enumerated.

Reported-by: Andy Lutomirski luto@kernel.org Tested-by: Paolo Bonzini pbonzini@redhat.com Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/x86/include/asm/vmx.h | 1 + arch/x86/kvm/vmx.c | 9 ++++++++- 2 files changed, 9 insertions(+), 1 deletion(-)

--- a/arch/x86/include/asm/vmx.h +++ b/arch/x86/include/asm/vmx.h @@ -299,6 +299,7 @@ enum vmcs_field { #define INTR_TYPE_NMI_INTR (2 << 8) /* NMI */ #define INTR_TYPE_HARD_EXCEPTION (3 << 8) /* processor exception */ #define INTR_TYPE_SOFT_INTR (4 << 8) /* software interrupt */ +#define INTR_TYPE_PRIV_SW_EXCEPTION (5 << 8) /* ICE breakpoint - undocumented */ #define INTR_TYPE_SOFT_EXCEPTION (6 << 8) /* software exception */

/* GUEST_INTERRUPTIBILITY_INFO flags. */ --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -883,6 +883,13 @@ static inline bool is_machine_check(u32 (INTR_TYPE_HARD_EXCEPTION | MC_VECTOR | INTR_INFO_VALID_MASK); }

+/* Undocumented: icebp/int1 */ +static inline bool is_icebp(u32 intr_info) +{ + return (intr_info & (INTR_INFO_INTR_TYPE_MASK | INTR_INFO_VALID_MASK)) + == (INTR_TYPE_PRIV_SW_EXCEPTION | INTR_INFO_VALID_MASK); +} + static inline bool cpu_has_vmx_msr_bitmap(void) { return vmcs_config.cpu_based_exec_ctrl & CPU_BASED_USE_MSR_BITMAPS; @@ -4951,7 +4958,7 @@ static int handle_exception(struct kvm_v (KVM_GUESTDBG_SINGLESTEP | KVM_GUESTDBG_USE_HW_BP))) { vcpu->arch.dr6 &= ~15; vcpu->arch.dr6 |= dr6 | DR6_RTM; - if (!(dr6 & ~DR6_RESERVED)) /* icebp */ + if (is_icebp(intr_info)) skip_emulated_instruction(vcpu);

kvm_queue_exception(vcpu, DB_VECTOR);

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

This reverts commit 093c265afffb0a91a7611c3bb74d0883731a807b which is commit 382bd4de61827dbaaf5fb4fb7b1f4be4a86505e7 upstream.

It causes too many problems with the stable tree, and would require too many other things to be backported, so just revert it.

Reported-by: Guenter Roeck linux@roeck-us.net Cc: Thomas Gleixner tglx@linutronix.de Cc: Hans de Goede hdegoede@redhat.com Cc: Marc Zyngier marc.zyngier@arm.com Cc: Thomas Gleixner tglx@linutronix.de Cc: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- kernel/irq/manage.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)

--- a/kernel/irq/manage.c +++ b/kernel/irq/manage.c @@ -1058,10 +1058,8 @@ __setup_irq(unsigned int irq, struct irq * set the trigger type must match. Also all must * agree on ONESHOT. */ - unsigned int oldtype = irqd_get_trigger_type(&desc->irq_data); - if (!((old->flags & new->flags) & IRQF_SHARED) || - (oldtype != (new->flags & IRQF_TRIGGER_MASK)) || + ((old->flags ^ new->flags) & IRQF_TRIGGER_MASK) || ((old->flags ^ new->flags) & IRQF_ONESHOT)) goto mismatch;

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Lorenzo Bianconi lorenzo.bianconi@redhat.com

[ Upstream commit 9f62c15f28b0d1d746734666d88a79f08ba1e43e ]

Fix the following slab-out-of-bounds kasan report in ndisc_fill_redirect_hdr_option when the incoming ipv6 packet is not linear and the accessed data are not in the linear data region of orig_skb.

[ 1503.122508] ================================================================== [ 1503.122832] BUG: KASAN: slab-out-of-bounds in ndisc_send_redirect+0x94e/0x990 [ 1503.123036] Read of size 1184 at addr ffff8800298ab6b0 by task netperf/1932

[ 1503.123220] CPU: 0 PID: 1932 Comm: netperf Not tainted 4.16.0-rc2+ #124 [ 1503.123347] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.10.2-2.fc27 04/01/2014 [ 1503.123527] Call Trace: [ 1503.123579] <IRQ> [ 1503.123638] print_address_description+0x6e/0x280 [ 1503.123849] kasan_report+0x233/0x350 [ 1503.123946] memcpy+0x1f/0x50 [ 1503.124037] ndisc_send_redirect+0x94e/0x990 [ 1503.125150] ip6_forward+0x1242/0x13b0 [...] [ 1503.153890] Allocated by task 1932: [ 1503.153982] kasan_kmalloc+0x9f/0xd0 [ 1503.154074] __kmalloc_track_caller+0xb5/0x160 [ 1503.154198] __kmalloc_reserve.isra.41+0x24/0x70 [ 1503.154324] __alloc_skb+0x130/0x3e0 [ 1503.154415] sctp_packet_transmit+0x21a/0x1810 [ 1503.154533] sctp_outq_flush+0xc14/0x1db0 [ 1503.154624] sctp_do_sm+0x34e/0x2740 [ 1503.154715] sctp_primitive_SEND+0x57/0x70 [ 1503.154807] sctp_sendmsg+0xaa6/0x1b10 [ 1503.154897] sock_sendmsg+0x68/0x80 [ 1503.154987] ___sys_sendmsg+0x431/0x4b0 [ 1503.155078] __sys_sendmsg+0xa4/0x130 [ 1503.155168] do_syscall_64+0x171/0x3f0 [ 1503.155259] entry_SYSCALL_64_after_hwframe+0x42/0xb7

[ 1503.155436] Freed by task 1932: [ 1503.155527] __kasan_slab_free+0x134/0x180 [ 1503.155618] kfree+0xbc/0x180 [ 1503.155709] skb_release_data+0x27f/0x2c0 [ 1503.155800] consume_skb+0x94/0xe0 [ 1503.155889] sctp_chunk_put+0x1aa/0x1f0 [ 1503.155979] sctp_inq_pop+0x2f8/0x6e0 [ 1503.156070] sctp_assoc_bh_rcv+0x6a/0x230 [ 1503.156164] sctp_inq_push+0x117/0x150 [ 1503.156255] sctp_backlog_rcv+0xdf/0x4a0 [ 1503.156346] __release_sock+0x142/0x250 [ 1503.156436] release_sock+0x80/0x180 [ 1503.156526] sctp_sendmsg+0xbb0/0x1b10 [ 1503.156617] sock_sendmsg+0x68/0x80 [ 1503.156708] ___sys_sendmsg+0x431/0x4b0 [ 1503.156799] __sys_sendmsg+0xa4/0x130 [ 1503.156889] do_syscall_64+0x171/0x3f0 [ 1503.156980] entry_SYSCALL_64_after_hwframe+0x42/0xb7

[ 1503.157158] The buggy address belongs to the object at ffff8800298ab600 which belongs to the cache kmalloc-1024 of size 1024 [ 1503.157444] The buggy address is located 176 bytes inside of 1024-byte region [ffff8800298ab600, ffff8800298aba00) [ 1503.157702] The buggy address belongs to the page: [ 1503.157820] page:ffffea0000a62a00 count:1 mapcount:0 mapping:0000000000000000 index:0x0 compound_mapcount: 0 [ 1503.158053] flags: 0x4000000000008100(slab|head) [ 1503.158171] raw: 4000000000008100 0000000000000000 0000000000000000 00000001800e000e [ 1503.158350] raw: dead000000000100 dead000000000200 ffff880036002600 0000000000000000 [ 1503.158523] page dumped because: kasan: bad access detected

[ 1503.158698] Memory state around the buggy address: [ 1503.158816] ffff8800298ab900: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 1503.158988] ffff8800298ab980: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 1503.159165] >ffff8800298aba00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 1503.159338] ^ [ 1503.159436] ffff8800298aba80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 1503.159610] ffff8800298abb00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 1503.159785] ================================================================== [ 1503.159964] Disabling lock debugging due to kernel taint

The test scenario to trigger the issue consists of 4 devices: - H0: data sender, connected to LAN0 - H1: data receiver, connected to LAN1 - GW0 and GW1: routers between LAN0 and LAN1. Both of them have an ethernet connection on LAN0 and LAN1 On H{0,1} set GW0 as default gateway while on GW0 set GW1 as next hop for data from LAN0 to LAN1. Moreover create an ip6ip6 tunnel between H0 and H1 and send 3 concurrent data streams (TCP/UDP/SCTP) from H0 to H1 through ip6ip6 tunnel (send buffer size is set to 16K). While data streams are active flush the route cache on HA multiple times. I have not been able to identify a given commit that introduced the issue since, using the reproducer described above, the kasan report has been triggered from 4.14 and I have not gone back further.

Reported-by: Jianlin Shi jishi@redhat.com Reviewed-by: Stefano Brivio sbrivio@redhat.com Reviewed-by: Eric Dumazet edumazet@google.com Signed-off-by: Lorenzo Bianconi lorenzo.bianconi@redhat.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/ipv6/ndisc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/net/ipv6/ndisc.c +++ b/net/ipv6/ndisc.c @@ -1443,7 +1443,8 @@ static void ndisc_fill_redirect_hdr_opti *(opt++) = (rd_len >> 3); opt += 6;

- memcpy(opt, ipv6_hdr(orig_skb), rd_len - 8); + skb_copy_bits(orig_skb, skb_network_offset(orig_skb), opt, + rd_len - 8); }

void ndisc_send_redirect(struct sk_buff *skb, const struct in6_addr *target)

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Christophe JAILLET christophe.jaillet@wanadoo.fr

[ Upstream commit 00777fac28ba3e126b9e63e789a613e8bd2cab25 ]

If the optional regulator is deferred, we must release some resources. They will be re-allocated when the probe function will be called again.

Fixes: 6eacf31139bf ("ethernet: arc: Add support for Rockchip SoC layer device tree bindings") Signed-off-by: Christophe JAILLET christophe.jaillet@wanadoo.fr Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/arc/emac_rockchip.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/drivers/net/ethernet/arc/emac_rockchip.c +++ b/drivers/net/ethernet/arc/emac_rockchip.c @@ -150,8 +150,10 @@ static int emac_rockchip_probe(struct pl /* Optional regulator for PHY */ priv->regulator = devm_regulator_get_optional(dev, "phy"); if (IS_ERR(priv->regulator)) { - if (PTR_ERR(priv->regulator) == -EPROBE_DEFER) - return -EPROBE_DEFER; + if (PTR_ERR(priv->regulator) == -EPROBE_DEFER) { + err = -EPROBE_DEFER; + goto out_clk_disable; + } dev_err(dev, "no regulator found\n"); priv->regulator = NULL; }

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Nicolas Dichtel nicolas.dichtel@6wind.com

[ Upstream commit 02a2385f37a7c6594c9d89b64c4a1451276f08eb ]

nlmsg_multicast() consumes always the skb, thus the original skb must be freed only when this function is called with a clone.

Fixes: cb9f7a9a5c96 ("netlink: ensure to loop over all netns in genlmsg_multicast_allns()") Reported-by: Ben Hutchings ben.hutchings@codethink.co.uk Signed-off-by: Nicolas Dichtel nicolas.dichtel@6wind.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/netlink/genetlink.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/netlink/genetlink.c +++ b/net/netlink/genetlink.c @@ -1083,7 +1083,7 @@ static int genlmsg_mcast(struct sk_buff if (!err) delivered = true; else if (err != -ESRCH) - goto error; + return err; return delivered ? 0 : -ESRCH; error: kfree_skb(skb);

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Vinicius Costa Gomes vinicius.gomes@intel.com

[ Upstream commit 6e5d58fdc9bedd0255a8781b258f10bbdc63e975 ]

When errors are enqueued to the error queue via sock_queue_err_skb() function, it is possible that the waiting application is not notified.

Calling 'sk->sk_data_ready()' would not notify applications that selected only POLLERR events in poll() (for example).

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Randy E. Witt randy.e.witt@intel.com Reviewed-by: Eric Dumazet edumazet@google.com Signed-off-by: Vinicius Costa Gomes vinicius.gomes@intel.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/core/skbuff.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -3527,7 +3527,7 @@ int sock_queue_err_skb(struct sock *sk,

skb_queue_tail(&sk->sk_error_queue, skb); if (!sock_flag(sk, SOCK_DEAD)) - sk->sk_data_ready(sk); + sk->sk_error_report(sk); return 0; } EXPORT_SYMBOL(sock_queue_err_skb);

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Julian Wiedmann jwi@linux.vnet.ibm.com

[ Upstream commit 6be687395b3124f002a653c1a50b3260222b3cd7 ]

On removal, a qeth card's netdevice is currently not properly freed because the call chain looks as follows:

qeth_core_remove_device(card) lx_remove_device(card) unregister_netdev(card->dev) card->dev = NULL !!! qeth_core_free_card(card) if (card->dev) !!! free_netdev(card->dev)

Fix it by free'ing the netdev straight after unregistering. This also fixes the sysfs-driven layer switch case (qeth_dev_layer2_store()), where the need to free the current netdevice was not considered at all.

Note that free_netdev() takes care of the netif_napi_del() for us too.

Fixes: 4a71df50047f ("qeth: new qeth device driver") Signed-off-by: Julian Wiedmann jwi@linux.vnet.ibm.com Reviewed-by: Ursula Braun ubraun@linux.vnet.ibm.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/s390/net/qeth_core_main.c | 2 -- drivers/s390/net/qeth_l2_main.c | 2 +- drivers/s390/net/qeth_l3_main.c | 2 +- 3 files changed, 2 insertions(+), 4 deletions(-)

--- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -4937,8 +4937,6 @@ static void qeth_core_free_card(struct q QETH_DBF_HEX(SETUP, 2, &card, sizeof(void *)); qeth_clean_channel(&card->read); qeth_clean_channel(&card->write); - if (card->dev) - free_netdev(card->dev); kfree(card->ip_tbd_list); qeth_free_qdio_buffers(card); unregister_service_level(&card->qeth_service_level); --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -922,8 +922,8 @@ static void qeth_l2_remove_device(struct qeth_l2_set_offline(cgdev);

if (card->dev) { - netif_napi_del(&card->napi); unregister_netdev(card->dev); + free_netdev(card->dev); card->dev = NULL; } return; --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -3333,8 +3333,8 @@ static void qeth_l3_remove_device(struct qeth_l3_set_offline(cgdev);

if (card->dev) { - netif_napi_del(&card->napi); unregister_netdev(card->dev); + free_netdev(card->dev); card->dev = NULL; }

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Julian Wiedmann jwi@linux.vnet.ibm.com

[ Upstream commit 17bf8c9b3d499d5168537c98b61eb7a1fcbca6c2 ]

For calling ccw_device_start(), issue_next_read() needs to hold the device's ccwlock. This is satisfied for the IRQ handler path (where qeth_irq() gets called under the ccwlock), but we need explicit locking for the initial call by the MPC initialization.

Signed-off-by: Julian Wiedmann jwi@linux.vnet.ibm.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/s390/net/qeth_core_main.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-)

--- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -517,8 +517,7 @@ static inline int qeth_is_cq(struct qeth queue == card->qdio.no_in_queues - 1; }

- -static int qeth_issue_next_read(struct qeth_card *card) +static int __qeth_issue_next_read(struct qeth_card *card) { int rc; struct qeth_cmd_buffer *iob; @@ -549,6 +548,17 @@ static int qeth_issue_next_read(struct q return rc; }

+static int qeth_issue_next_read(struct qeth_card *card) +{ + int ret; + + spin_lock_irq(get_ccwdev_lock(CARD_RDEV(card))); + ret = __qeth_issue_next_read(card); + spin_unlock_irq(get_ccwdev_lock(CARD_RDEV(card))); + + return ret; +} + static struct qeth_reply *qeth_alloc_reply(struct qeth_card *card) { struct qeth_reply *reply; @@ -1166,7 +1176,7 @@ static void qeth_irq(struct ccw_device * return; if (channel == &card->read && channel->state == CH_STATE_UP) - qeth_issue_next_read(card); + __qeth_issue_next_read(card);

iob = channel->iob; index = channel->buf_no;

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Florian Fainelli f.fainelli@gmail.com

[ Upstream commit a069215cf5985f3aa1bba550264907d6bd05c5f7 ]

When unbinding/removing the driver, we will run into the following warnings:

[ 259.655198] fec 400d1000.ethernet: 400d1000.ethernet supply phy not found, using dummy regulator [ 259.665065] fec 400d1000.ethernet: Unbalanced pm_runtime_enable! [ 259.672770] fec 400d1000.ethernet (unnamed net_device) (uninitialized): Invalid MAC address: 00:00:00:00:00:00 [ 259.683062] fec 400d1000.ethernet (unnamed net_device) (uninitialized): Using random MAC address: f2:3e:93:b7:29:c1 [ 259.696239] libphy: fec_enet_mii_bus: probed

Avoid these warnings by balancing the runtime PM calls during fec_drv_remove().

Signed-off-by: Florian Fainelli f.fainelli@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/freescale/fec_main.c | 2 ++ 1 file changed, 2 insertions(+)

--- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -3339,6 +3339,8 @@ fec_drv_remove(struct platform_device *p if (fep->reg_phy) regulator_disable(fep->reg_phy); fec_enet_clk_enable(ndev, false); + pm_runtime_put(&pdev->dev); + pm_runtime_disable(&pdev->dev); of_node_put(fep->phy_node); free_netdev(ndev);

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Stefan Roese sr@denx.de

commit 9066ae7ff5d89c0b5daa271e2d573540097a94fa upstream.

When trying to use the driver (e.g. aplay *.wav), the 4MiB DMA buffer will get mmapp'ed in 16KiB chunks. But this fails with the 2nd 16KiB area, as the page offset is outside of the VMA range (size), which is currently used as size parameter in snd_pcm_lib_default_mmap(). By using the DMA buffer size (dma_bytes) instead, the complete DMA buffer can be mmapp'ed and the issue is fixed.

This issue was detected on an ARM platform (TI AM57xx) using the RME HDSP MADI PCIe soundcard.

Fixes: 657b1989dacf ("ALSA: pcm - Use dma_mmap_coherent() if available") Signed-off-by: Stefan Roese sr@denx.de Cc: stable@vger.kernel.org Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- sound/core/pcm_native.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/sound/core/pcm_native.c +++ b/sound/core/pcm_native.c @@ -3394,7 +3394,7 @@ int snd_pcm_lib_default_mmap(struct snd_ area, substream->runtime->dma_area, substream->runtime->dma_addr, - area->vm_end - area->vm_start); + substream->runtime->dma_bytes); #elif defined(CONFIG_MIPS) && defined(CONFIG_DMA_NONCOHERENT) if (substream->dma_buffer.dev.type == SNDRV_DMA_TYPE_DEV && !plat_device_is_coherent(substream->dma_buffer.dev.dev))

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Linus Torvalds torvalds@linux-foundation.org

commit f67b15037a7a50c57f72e69a6d59941ad90a0f0f upstream.

Annoyingly, modify_user_hw_breakpoint() unnecessarily complicates the modification of a breakpoint - simplify it and remove the pointless local variables.

Also update the stale Docbook while at it.

Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Acked-by: Thomas Gleixner tglx@linutronix.de Cc: stable@vger.kernel.org Cc: Alexander Shishkin alexander.shishkin@linux.intel.com Cc: Andy Lutomirski luto@kernel.org Cc: Arnaldo Carvalho de Melo acme@redhat.com Cc: Frederic Weisbecker fweisbec@gmail.com Cc: Jiri Olsa jolsa@redhat.com Cc: Peter Zijlstra peterz@infradead.org Cc: Stephane Eranian eranian@google.com Cc: Vince Weaver vincent.weaver@maine.edu Signed-off-by: Ingo Molnar mingo@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- kernel/events/hw_breakpoint.c | 30 +++++++----------------------- 1 file changed, 7 insertions(+), 23 deletions(-)

--- a/kernel/events/hw_breakpoint.c +++ b/kernel/events/hw_breakpoint.c @@ -427,16 +427,9 @@ EXPORT_SYMBOL_GPL(register_user_hw_break * modify_user_hw_breakpoint - modify a user-space hardware breakpoint * @bp: the breakpoint structure to modify * @attr: new breakpoint attributes - * @triggered: callback to trigger when we hit the breakpoint - * @tsk: pointer to 'task_struct' of the process to which the address belongs */ int modify_user_hw_breakpoint(struct perf_event *bp, struct perf_event_attr *attr) { - u64 old_addr = bp->attr.bp_addr; - u64 old_len = bp->attr.bp_len; - int old_type = bp->attr.bp_type; - int err = 0; - /* * modify_user_hw_breakpoint can be invoked with IRQs disabled and hence it * will not be possible to raise IPIs that invoke __perf_event_disable. @@ -451,27 +444,18 @@ int modify_user_hw_breakpoint(struct per bp->attr.bp_addr = attr->bp_addr; bp->attr.bp_type = attr->bp_type; bp->attr.bp_len = attr->bp_len; + bp->attr.disabled = 1;

- if (attr->disabled) - goto end; - - err = validate_hw_breakpoint(bp); - if (!err) - perf_event_enable(bp); + if (!attr->disabled) { + int err = validate_hw_breakpoint(bp);

- if (err) { - bp->attr.bp_addr = old_addr; - bp->attr.bp_type = old_type; - bp->attr.bp_len = old_len; - if (!bp->attr.disabled) - perf_event_enable(bp); + if (err) + return err;

- return err; + perf_event_enable(bp); + bp->attr.disabled = 0; }

-end: - bp->attr.disabled = attr->disabled; - return 0; } EXPORT_SYMBOL_GPL(modify_user_hw_breakpoint);

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Felipe F. Tonello eu@felipetonello.com

commit 079fe5a6da616891cca1a26e803e1df2a87e9ae5 upstream.

This function is shared between gadget functions, so this avoid unnecessary duplicated code and potentially avoid memory leaks.

Reviewed-by: Robert Baldyga r.baldyga@samsung.com Signed-off-by: Felipe F. Tonello eu@felipetonello.com Signed-off-by: Felipe Balbi balbi@ti.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/usb/gadget/function/f_midi.c | 6 ------ drivers/usb/gadget/function/f_sourcesink.c | 6 ------ drivers/usb/gadget/function/g_zero.h | 1 - drivers/usb/gadget/u_f.c | 1 - drivers/usb/gadget/u_f.h | 10 ++++++++-- 5 files changed, 8 insertions(+), 16 deletions(-)

--- a/drivers/usb/gadget/function/f_midi.c +++ b/drivers/usb/gadget/function/f_midi.c @@ -199,12 +199,6 @@ static inline struct usb_request *midi_a return alloc_ep_req(ep, length, length); }

-static void free_ep_req(struct usb_ep *ep, struct usb_request *req) -{ - kfree(req->buf); - usb_ep_free_request(ep, req); -} - static const uint8_t f_midi_cin_length[] = { 0, 0, 2, 3, 3, 1, 2, 3, 3, 3, 3, 3, 2, 2, 3, 1 }; --- a/drivers/usb/gadget/function/f_sourcesink.c +++ b/drivers/usb/gadget/function/f_sourcesink.c @@ -435,12 +435,6 @@ static inline struct usb_request *ss_all return alloc_ep_req(ep, len, buflen); }

-void free_ep_req(struct usb_ep *ep, struct usb_request *req) -{ - kfree(req->buf); - usb_ep_free_request(ep, req); -} - static void disable_ep(struct usb_composite_dev *cdev, struct usb_ep *ep) { int value; --- a/drivers/usb/gadget/function/g_zero.h +++ b/drivers/usb/gadget/function/g_zero.h @@ -69,7 +69,6 @@ void lb_modexit(void); int lb_modinit(void);

/* common utilities */ -void free_ep_req(struct usb_ep *ep, struct usb_request *req); void disable_endpoints(struct usb_composite_dev *cdev, struct usb_ep *in, struct usb_ep *out, struct usb_ep *iso_in, struct usb_ep *iso_out, --- a/drivers/usb/gadget/u_f.c +++ b/drivers/usb/gadget/u_f.c @@ -11,7 +11,6 @@ * published by the Free Software Foundation. */

-#include <linux/usb/gadget.h> #include "u_f.h"

struct usb_request *alloc_ep_req(struct usb_ep *ep, int len, int default_len) --- a/drivers/usb/gadget/u_f.h +++ b/drivers/usb/gadget/u_f.h @@ -16,6 +16,8 @@ #ifndef __U_F_H__ #define __U_F_H__

+#include <linux/usb/gadget.h> + /* Variable Length Array Macros **********************************************/ #define vla_group(groupname) size_t groupname##__next = 0 #define vla_group_size(groupname) groupname##__next @@ -45,8 +47,12 @@ struct usb_ep; struct usb_request;

+/* Requests allocated via alloc_ep_req() must be freed by free_ep_req(). */ struct usb_request *alloc_ep_req(struct usb_ep *ep, int len, int default_len); +static inline void free_ep_req(struct usb_ep *ep, struct usb_request *req) +{ + kfree(req->buf); + usb_ep_free_request(ep, req); +}

#endif /* __U_F_H__ */ - -

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Felipe F. Tonello eu@felipetonello.com

commit 16b114a6d7973cf027e4c2b23eae1076eaf98c25 upstream.

USB spec specifies wMaxPacketSize to be little endian (as other properties), so when using this variable in the driver we should convert to the current CPU endianness if necessary.

This patch also introduces usb_ep_align() which does always returns the aligned buffer size for an endpoint. This is useful to be used by USB requests allocator functions.

Signed-off-by: Felipe F. Tonello eu@felipetonello.com Signed-off-by: Felipe Balbi felipe.balbi@linux.intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- include/linux/usb/gadget.h | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-)

--- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -582,8 +582,20 @@ static inline struct usb_gadget *dev_to_

/** + * usb_ep_align - returns @len aligned to ep's maxpacketsize. + * @ep: the endpoint whose maxpacketsize is used to align @len + * @len: buffer size's length to align to @ep's maxpacketsize + * + * This helper is used to align buffer's size to an ep's maxpacketsize. + */ +static inline size_t usb_ep_align(struct usb_ep *ep, size_t len) +{ + return round_up(len, (size_t)le16_to_cpu(ep->desc->wMaxPacketSize)); +} + +/** * usb_ep_align_maybe - returns @len aligned to ep's maxpacketsize if gadget - * requires quirk_ep_out_aligned_size, otherwise reguens len. + * requires quirk_ep_out_aligned_size, otherwise returns len. * @g: controller to check for quirk * @ep: the endpoint whose maxpacketsize is used to align @len * @len: buffer size's length to align to @ep's maxpacketsize @@ -594,8 +606,7 @@ static inline struct usb_gadget *dev_to_ static inline size_t usb_ep_align_maybe(struct usb_gadget *g, struct usb_ep *ep, size_t len) { - return !g->quirk_ep_out_aligned_size ? len : - round_up(len, (size_t)ep->desc->wMaxPacketSize); + return g->quirk_ep_out_aligned_size ? usb_ep_align(ep, len) : len; }

/**

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Krzysztof Opasiak kopasiak90@gmail.com

commit aa65d11aa008f4de58a9cee7e121666d9d68505e upstream.

When we unlock our spinlock to copy data to user we may get disabled by USB host and free the whole list of completed out requests including the one from which we are copying the data to user memory.

To prevent from this let's remove our working element from the list and place it back only if there is sth left when we finish with it.

Fixes: 99c515005857 ("usb: gadget: hidg: register OUT INT endpoint for SET_REPORT") Cc: stable@vger.kernel.org Tested-by: David Lechner david@lechnology.com Signed-off-by: Krzysztof Opasiak k.opasiak@samsung.com Signed-off-by: Felipe Balbi felipe.balbi@linux.intel.com Cc: Jerry Zhang zhangjerry@google.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/usb/gadget/function/f_hid.c | 24 ++++++++++++++++++++---- 1 file changed, 20 insertions(+), 4 deletions(-)

--- a/drivers/usb/gadget/function/f_hid.c +++ b/drivers/usb/gadget/function/f_hid.c @@ -197,6 +197,13 @@ static ssize_t f_hidg_read(struct file * /* pick the first one */ list = list_first_entry(&hidg->completed_out_req, struct f_hidg_req_list, list); + + /* + * Remove this from list to protect it from beign free() + * while host disables our function + */ + list_del(&list->list); + req = list->req; count = min_t(unsigned int, count, req->actual - list->pos); spin_unlock_irqrestore(&hidg->spinlock, flags); @@ -212,15 +219,20 @@ static ssize_t f_hidg_read(struct file * * call, taking into account its current read position. */ if (list->pos == req->actual) { - spin_lock_irqsave(&hidg->spinlock, flags); - list_del(&list->list); kfree(list); - spin_unlock_irqrestore(&hidg->spinlock, flags);

req->length = hidg->report_length; ret = usb_ep_queue(hidg->out_ep, req, GFP_KERNEL); - if (ret < 0) + if (ret < 0) { + free_ep_req(hidg->out_ep, req); return ret; + } + } else { + spin_lock_irqsave(&hidg->spinlock, flags); + list_add(&list->list, &hidg->completed_out_req); + spin_unlock_irqrestore(&hidg->spinlock, flags); + + wake_up(&hidg->read_queue); }

return count; @@ -455,6 +467,7 @@ static void hidg_disable(struct usb_func { struct f_hidg *hidg = func_to_hidg(f); struct f_hidg_req_list *list, *next; + unsigned long flags;

usb_ep_disable(hidg->in_ep); hidg->in_ep->driver_data = NULL; @@ -462,10 +475,13 @@ static void hidg_disable(struct usb_func usb_ep_disable(hidg->out_ep); hidg->out_ep->driver_data = NULL;

+ spin_lock_irqsave(&hidg->spinlock, flags); list_for_each_entry_safe(list, next, &hidg->completed_out_req, list) { + free_ep_req(hidg->out_ep, list->req); list_del(&list->list); kfree(list); } + spin_unlock_irqrestore(&hidg->spinlock, flags); }

static int hidg_set_alt(struct usb_function *f, unsigned intf, unsigned alt)

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ben Hutchings ben.hutchings@codethink.co.uk

This is a stable-only fix for the backport of commit 5d9b70f7d52e ("xhci: Don't add a virt_dev to the devs array before it's fully allocated").

In branches that predate commit c5628a2af83a ("xhci: remove endpoint ring cache") there is an additional failure path in xhci_alloc_virt_device() where ring cache allocation fails, in which case we need to free the ring allocated for endpoint 0.

Signed-off-by: Ben Hutchings ben.hutchings@codethink.co.uk Cc: Mathias Nyman mathias.nyman@intel.com Cc: Wang Han wanghan1995315@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/usb/host/xhci-mem.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1032,7 +1032,8 @@ int xhci_alloc_virt_device(struct xhci_h

return 1; fail: - + if (dev->eps[0].ring) + xhci_ring_free(xhci, dev->eps[0].ring); if (dev->in_ctx) xhci_free_container_ctx(xhci, dev->in_ctx); if (dev->out_ctx)

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Florian Westphal fw@strlen.de

commit d97ca5d714a5334aecadadf696875da40f1fbf3e upstream.

The sanity test added in ecd7918745234 can be bypassed, validation only occurs if XFRM_STATE_ESN flag is set, but rest of code doesn't care and just checks if the attribute itself is present.

So always validate. Alternative is to reject if we have the attribute without the flag but that would change abi.

Reported-by: syzbot+0ab777c27d2bb7588f73@syzkaller.appspotmail.com Cc: Mathias Krause minipli@googlemail.com Fixes: ecd7918745234 ("xfrm_user: ensure user supplied esn replay window is valid") Fixes: d8647b79c3b7e ("xfrm: Add user interface for esn and big anti-replay windows") Signed-off-by: Florian Westphal fw@strlen.de Signed-off-by: Steffen Klassert steffen.klassert@secunet.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- net/xfrm/xfrm_user.c | 21 ++++++++------------- 1 file changed, 8 insertions(+), 13 deletions(-)

--- a/net/xfrm/xfrm_user.c +++ b/net/xfrm/xfrm_user.c @@ -120,22 +120,17 @@ static inline int verify_replay(struct x struct nlattr *rt = attrs[XFRMA_REPLAY_ESN_VAL]; struct xfrm_replay_state_esn *rs;

- if (p->flags & XFRM_STATE_ESN) { - if (!rt) - return -EINVAL; - - rs = nla_data(rt); + if (!rt) + return (p->flags & XFRM_STATE_ESN) ? -EINVAL : 0;

- if (rs->bmp_len > XFRMA_REPLAY_ESN_MAX / sizeof(rs->bmp[0]) / 8) - return -EINVAL; + rs = nla_data(rt);

- if (nla_len(rt) < xfrm_replay_state_esn_len(rs) && - nla_len(rt) != sizeof(*rs)) - return -EINVAL; - } + if (rs->bmp_len > XFRMA_REPLAY_ESN_MAX / sizeof(rs->bmp[0]) / 8) + return -EINVAL;

- if (!rt) - return 0; + if (nla_len(rt) < xfrm_replay_state_esn_len(rs) && + nla_len(rt) != sizeof(*rs)) + return -EINVAL;

/* As only ESP and AH support ESN feature. */ if ((p->id.proto != IPPROTO_ESP) && (p->id.proto != IPPROTO_AH))

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Steffen Klassert steffen.klassert@secunet.com

commit 19d7df69fdb2636856dc8919de72fc1bf8f79598 upstream.

We don't have a compat layer for xfrm, so userspace and kernel structures have different sizes in this case. This results in a broken configuration, so refuse to configure socket policies when trying to insert from 32 bit userspace as we do it already with policies inserted via netlink.

Reported-and-tested-by: syzbot+e1a1577ca8bcb47b769a@syzkaller.appspotmail.com Signed-off-by: Steffen Klassert steffen.klassert@secunet.com [use is_compat_task() - gregkh] Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- net/xfrm/xfrm_state.c | 5 +++++ 1 file changed, 5 insertions(+)

--- a/net/xfrm/xfrm_state.c +++ b/net/xfrm/xfrm_state.c @@ -1845,6 +1845,11 @@ int xfrm_user_policy(struct sock *sk, in struct xfrm_mgr *km; struct xfrm_policy *pol = NULL;

+#ifdef CONFIG_COMPAT + if (is_compat_task()) + return -EOPNOTSUPP; +#endif + if (!optval && !optlen) { xfrm_sk_policy_insert(sk, XFRM_POLICY_IN, NULL); xfrm_sk_policy_insert(sk, XFRM_POLICY_OUT, NULL);

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Florian Westphal fw@strlen.de

commit b1d0a5d0cba4597c0394997b2d5fced3e3841b4e upstream.

recent and hashlimit both create /proc files, but only check that name is 0 terminated.

This can trigger WARN() from procfs when name is "" or "/". Add helper for this and then use it for both.

Cc: Eric Dumazet eric.dumazet@gmail.com Reported-by: Eric Dumazet eric.dumazet@gmail.com Reported-by: syzbot+0502b00edac2a0680b61@syzkaller.appspotmail.com Signed-off-by: Florian Westphal fw@strlen.de Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- include/linux/netfilter/x_tables.h | 2 ++ net/netfilter/x_tables.c | 30 ++++++++++++++++++++++++++++++ net/netfilter/xt_hashlimit.c | 5 +++-- net/netfilter/xt_recent.c | 6 +++--- 4 files changed, 38 insertions(+), 5 deletions(-)

--- a/include/linux/netfilter/x_tables.h +++ b/include/linux/netfilter/x_tables.h @@ -247,6 +247,8 @@ unsigned int *xt_alloc_entry_offsets(uns bool xt_find_jump_offset(const unsigned int *offsets, unsigned int target, unsigned int size);

+int xt_check_proc_name(const char *name, unsigned int size); + int xt_check_match(struct xt_mtchk_param *, unsigned int size, u_int8_t proto, bool inv_proto); int xt_check_target(struct xt_tgchk_param *, unsigned int size, u_int8_t proto, --- a/net/netfilter/x_tables.c +++ b/net/netfilter/x_tables.c @@ -367,6 +367,36 @@ textify_hooks(char *buf, size_t size, un return buf; }

+/** + * xt_check_proc_name - check that name is suitable for /proc file creation + * + * @name: file name candidate + * @size: length of buffer + * + * some x_tables modules wish to create a file in /proc. + * This function makes sure that the name is suitable for this + * purpose, it checks that name is NUL terminated and isn't a 'special' + * name, like "..". + * + * returns negative number on error or 0 if name is useable. + */ +int xt_check_proc_name(const char *name, unsigned int size) +{ + if (name[0] == '\0') + return -EINVAL; + + if (strnlen(name, size) == size) + return -ENAMETOOLONG; + + if (strcmp(name, ".") == 0 || + strcmp(name, "..") == 0 || + strchr(name, '/')) + return -EINVAL; + + return 0; +} +EXPORT_SYMBOL(xt_check_proc_name); + int xt_check_match(struct xt_mtchk_param *par, unsigned int size, u_int8_t proto, bool inv_proto) { --- a/net/netfilter/xt_hashlimit.c +++ b/net/netfilter/xt_hashlimit.c @@ -668,8 +668,9 @@ static int hashlimit_mt_check(const stru

if (info->cfg.gc_interval == 0 || info->cfg.expire == 0) return -EINVAL; - if (info->name[sizeof(info->name)-1] != '\0') - return -EINVAL; + ret = xt_check_proc_name(info->name, sizeof(info->name)); + if (ret) + return ret; if (par->family == NFPROTO_IPV4) { if (info->cfg.srcmask > 32 || info->cfg.dstmask > 32) return -EINVAL; --- a/net/netfilter/xt_recent.c +++ b/net/netfilter/xt_recent.c @@ -355,9 +355,9 @@ static int recent_mt_check(const struct info->hit_count, ip_pkt_list_tot); return -EINVAL; } - if (info->name[0] == '\0' || - strnlen(info->name, XT_RECENT_NAME_LEN) == XT_RECENT_NAME_LEN) - return -EINVAL; + ret = xt_check_proc_name(info->name, sizeof(info->name)); + if (ret) + return ret;

mutex_lock(&recent_mutex); t = recent_table_lookup(recent_net, info->name);

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Paolo Bonzini pbonzini@redhat.com

commit a680f1d463aeaeb00d22af257a56e111967c2f18 upstream.

Multi-queue virtio-scsi uses a different scsi_host_template struct. Add the .device_alloc field there, too.

Fixes: 25d1d50e23275e141e3a3fe06c25a99f4c4bf4e0 Cc: stable@vger.kernel.org Cc: David Gibson david@gibson.dropbear.id.au Signed-off-by: Paolo Bonzini pbonzini@redhat.com Reviewed-by: Fam Zheng famz@redhat.com Reviewed-by: Stefan Hajnoczi stefanha@redhat.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Cc: Ben Hutchings ben.hutchings@codethink.co.uk Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/scsi/virtio_scsi.c | 1 + 1 file changed, 1 insertion(+)

--- a/drivers/scsi/virtio_scsi.c +++ b/drivers/scsi/virtio_scsi.c @@ -794,6 +794,7 @@ static struct scsi_host_template virtscs .change_queue_depth = virtscsi_change_queue_depth, .eh_abort_handler = virtscsi_abort, .eh_device_reset_handler = virtscsi_device_reset, + .slave_alloc = virtscsi_device_alloc,

.can_queue = 1024, .dma_boundary = UINT_MAX,

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ricardo Ribalda ricardo.ribalda@gmail.com

commit 3171cc2b4eb9831ab4df1d80d0410a945b8bc84e upstream.

According to the doc, V4L2_BUF_FLAG_DONE is cleared after DQBUF:

V4L2_BUF_FLAG_DONE 0x00000004 ... After calling the VIDIOC_QBUF or VIDIOC_DQBUF it is always cleared ...

Unfortunately, it seems that videobuf2 keeps it set after DQBUF. This can be tested with vivid and dev_debug:

[257604.338082] video1: VIDIOC_DQBUF: 71:33:25.00260479 index=3, type=vid-cap, flags=0x00002004, field=none, sequence=163, memory=userptr, bytesused=460800, offset/userptr=0x344b000, length=460800

This patch forces FLAG_DONE to 0 after calling DQBUF.

Reported-by: Dimitrios Katsaros patcherwork@gmail.com Signed-off-by: Ricardo Ribalda Delgado ricardo.ribalda@gmail.com Signed-off-by: Hans Verkuil hans.verkuil@cisco.com Signed-off-by: Mauro Carvalho Chehab mchehab@s-opensource.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Mauro Carvalho Chehab mchehab@s-opensource.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/media/v4l2-core/videobuf2-core.c | 5 +++++ 1 file changed, 5 insertions(+)

--- a/drivers/media/v4l2-core/videobuf2-core.c +++ b/drivers/media/v4l2-core/videobuf2-core.c @@ -2075,6 +2075,11 @@ static int vb2_internal_dqbuf(struct vb2 dprintk(1, "dqbuf of buffer %d, with state %d\n", vb->v4l2_buf.index, vb->state);

+ /* + * After calling the VIDIOC_DQBUF V4L2_BUF_FLAG_DONE must be + * cleared. + */ + b->flags &= ~V4L2_BUF_FLAG_DONE; return 0; }

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Hans Verkuil hans.verkuil@cisco.com

commit b7b957d429f601d6d1942122b339474f31191d75 upstream.

The indentation of this source is all over the place. Fix this. This patch only changes whitespace.

Signed-off-by: Hans Verkuil hans.verkuil@cisco.com Acked-by: Sakari Ailus sakari.ailus@linux.intel.com Cc: stable@vger.kernel.org # for v4.15 and up Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Mauro Carvalho Chehab mchehab@s-opensource.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/media/v4l2-core/v4l2-compat-ioctl32.c | 216 +++++++++++++------------- 1 file changed, 108 insertions(+), 108 deletions(-)

--- a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c +++ b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c @@ -48,11 +48,11 @@ struct v4l2_window32 { static int get_v4l2_window32(struct v4l2_window *kp, struct v4l2_window32 __user *up) { if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_window32)) || - copy_from_user(&kp->w, &up->w, sizeof(up->w)) || - get_user(kp->field, &up->field) || - get_user(kp->chromakey, &up->chromakey) || - get_user(kp->clipcount, &up->clipcount)) - return -EFAULT; + copy_from_user(&kp->w, &up->w, sizeof(up->w)) || + get_user(kp->field, &up->field) || + get_user(kp->chromakey, &up->chromakey) || + get_user(kp->clipcount, &up->clipcount)) + return -EFAULT; if (kp->clipcount > 2048) return -EINVAL; if (kp->clipcount) { @@ -82,10 +82,10 @@ static int get_v4l2_window32(struct v4l2 static int put_v4l2_window32(struct v4l2_window *kp, struct v4l2_window32 __user *up) { if (copy_to_user(&up->w, &kp->w, sizeof(kp->w)) || - put_user(kp->field, &up->field) || - put_user(kp->chromakey, &up->chromakey) || - put_user(kp->clipcount, &up->clipcount)) - return -EFAULT; + put_user(kp->field, &up->field) || + put_user(kp->chromakey, &up->chromakey) || + put_user(kp->clipcount, &up->clipcount)) + return -EFAULT; return 0; }

@@ -97,7 +97,7 @@ static inline int get_v4l2_pix_format(st }

static inline int get_v4l2_pix_format_mplane(struct v4l2_pix_format_mplane *kp, - struct v4l2_pix_format_mplane __user *up) + struct v4l2_pix_format_mplane __user *up) { if (copy_from_user(kp, up, sizeof(struct v4l2_pix_format_mplane))) return -EFAULT; @@ -112,7 +112,7 @@ static inline int put_v4l2_pix_format(st }

static inline int put_v4l2_pix_format_mplane(struct v4l2_pix_format_mplane *kp, - struct v4l2_pix_format_mplane __user *up) + struct v4l2_pix_format_mplane __user *up) { if (copy_to_user(up, kp, sizeof(struct v4l2_pix_format_mplane))) return -EFAULT; @@ -200,7 +200,7 @@ static int __get_v4l2_format32(struct v4 return get_v4l2_sliced_vbi_format(&kp->fmt.sliced, &up->fmt.sliced); default: printk(KERN_INFO "compat_ioctl32: unexpected VIDIOC_FMT type %d\n", - kp->type); + kp->type); return -EINVAL; } } @@ -241,7 +241,7 @@ static int __put_v4l2_format32(struct v4 return put_v4l2_sliced_vbi_format(&kp->fmt.sliced, &up->fmt.sliced); default: printk(KERN_INFO "compat_ioctl32: unexpected VIDIOC_FMT type %d\n", - kp->type); + kp->type); return -EINVAL; } } @@ -275,7 +275,7 @@ static int get_v4l2_standard32(struct v4 { /* other fields are not set by the user, nor used by the driver */ if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_standard32)) || - get_user(kp->index, &up->index)) + get_user(kp->index, &up->index)) return -EFAULT; return 0; } @@ -283,13 +283,13 @@ static int get_v4l2_standard32(struct v4 static int put_v4l2_standard32(struct v4l2_standard *kp, struct v4l2_standard32 __user *up) { if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_standard32)) || - put_user(kp->index, &up->index) || - copy_to_user(up->id, &kp->id, sizeof(__u64)) || - copy_to_user(up->name, kp->name, 24) || - copy_to_user(&up->frameperiod, &kp->frameperiod, sizeof(kp->frameperiod)) || - put_user(kp->framelines, &up->framelines) || - copy_to_user(up->reserved, kp->reserved, 4 * sizeof(__u32))) - return -EFAULT; + put_user(kp->index, &up->index) || + copy_to_user(up->id, &kp->id, sizeof(__u64)) || + copy_to_user(up->name, kp->name, 24) || + copy_to_user(&up->frameperiod, &kp->frameperiod, sizeof(kp->frameperiod)) || + put_user(kp->framelines, &up->framelines) || + copy_to_user(up->reserved, kp->reserved, 4 * sizeof(__u32))) + return -EFAULT; return 0; }

@@ -329,14 +329,14 @@ struct v4l2_buffer32 { };

static int get_v4l2_plane32(struct v4l2_plane __user *up, struct v4l2_plane32 __user *up32, - enum v4l2_memory memory) + enum v4l2_memory memory) { void __user *up_pln; compat_long_t p;

if (copy_in_user(up, up32, 2 * sizeof(__u32)) || - copy_in_user(&up->data_offset, &up32->data_offset, - sizeof(__u32))) + copy_in_user(&up->data_offset, &up32->data_offset, + sizeof(__u32))) return -EFAULT;

if (memory == V4L2_MEMORY_USERPTR) { @@ -350,7 +350,7 @@ static int get_v4l2_plane32(struct v4l2_ return -EFAULT; } else { if (copy_in_user(&up->m.mem_offset, &up32->m.mem_offset, - sizeof(__u32))) + sizeof(__u32))) return -EFAULT; }

@@ -358,23 +358,23 @@ static int get_v4l2_plane32(struct v4l2_ }

static int put_v4l2_plane32(struct v4l2_plane __user *up, struct v4l2_plane32 __user *up32, - enum v4l2_memory memory) + enum v4l2_memory memory) { if (copy_in_user(up32, up, 2 * sizeof(__u32)) || - copy_in_user(&up32->data_offset, &up->data_offset, - sizeof(__u32))) + copy_in_user(&up32->data_offset, &up->data_offset, + sizeof(__u32))) return -EFAULT;

/* For MMAP, driver might've set up the offset, so copy it back. * USERPTR stays the same (was userspace-provided), so no copying. */ if (memory == V4L2_MEMORY_MMAP) if (copy_in_user(&up32->m.mem_offset, &up->m.mem_offset, - sizeof(__u32))) + sizeof(__u32))) return -EFAULT; /* For DMABUF, driver might've set up the fd, so copy it back. */ if (memory == V4L2_MEMORY_DMABUF) if (copy_in_user(&up32->m.fd, &up->m.fd, - sizeof(int))) + sizeof(int))) return -EFAULT;

return 0; @@ -389,19 +389,19 @@ static int get_v4l2_buffer32(struct v4l2 int ret;

if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_buffer32)) || - get_user(kp->index, &up->index) || - get_user(kp->type, &up->type) || - get_user(kp->flags, &up->flags) || - get_user(kp->memory, &up->memory) || - get_user(kp->length, &up->length)) - return -EFAULT; + get_user(kp->index, &up->index) || + get_user(kp->type, &up->type) || + get_user(kp->flags, &up->flags) || + get_user(kp->memory, &up->memory) || + get_user(kp->length, &up->length)) + return -EFAULT;

if (V4L2_TYPE_IS_OUTPUT(kp->type)) if (get_user(kp->bytesused, &up->bytesused) || - get_user(kp->field, &up->field) || - get_user(kp->timestamp.tv_sec, &up->timestamp.tv_sec) || - get_user(kp->timestamp.tv_usec, - &up->timestamp.tv_usec)) + get_user(kp->field, &up->field) || + get_user(kp->timestamp.tv_sec, &up->timestamp.tv_sec) || + get_user(kp->timestamp.tv_usec, + &up->timestamp.tv_usec)) return -EFAULT;

if (V4L2_TYPE_IS_MULTIPLANAR(kp->type)) { @@ -418,13 +418,13 @@ static int get_v4l2_buffer32(struct v4l2

uplane32 = compat_ptr(p); if (!access_ok(VERIFY_READ, uplane32, - num_planes * sizeof(struct v4l2_plane32))) + num_planes * sizeof(struct v4l2_plane32))) return -EFAULT;

/* We don't really care if userspace decides to kill itself * by passing a very big num_planes value */ uplane = compat_alloc_user_space(num_planes * - sizeof(struct v4l2_plane)); + sizeof(struct v4l2_plane)); kp->m.planes = (__force struct v4l2_plane *)uplane;

while (--num_planes >= 0) { @@ -442,12 +442,12 @@ static int get_v4l2_buffer32(struct v4l2 break; case V4L2_MEMORY_USERPTR: { - compat_long_t tmp; + compat_long_t tmp;

- if (get_user(tmp, &up->m.userptr)) - return -EFAULT; + if (get_user(tmp, &up->m.userptr)) + return -EFAULT;

- kp->m.userptr = (unsigned long)compat_ptr(tmp); + kp->m.userptr = (unsigned long)compat_ptr(tmp); } break; case V4L2_MEMORY_OVERLAY: @@ -473,22 +473,22 @@ static int put_v4l2_buffer32(struct v4l2 int ret;

if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_buffer32)) || - put_user(kp->index, &up->index) || - put_user(kp->type, &up->type) || - put_user(kp->flags, &up->flags) || - put_user(kp->memory, &up->memory)) - return -EFAULT; + put_user(kp->index, &up->index) || + put_user(kp->type, &up->type) || + put_user(kp->flags, &up->flags) || + put_user(kp->memory, &up->memory)) + return -EFAULT;

if (put_user(kp->bytesused, &up->bytesused) || - put_user(kp->field, &up->field) || - put_user(kp->timestamp.tv_sec, &up->timestamp.tv_sec) || - put_user(kp->timestamp.tv_usec, &up->timestamp.tv_usec) || - copy_to_user(&up->timecode, &kp->timecode, sizeof(struct v4l2_timecode)) || - put_user(kp->sequence, &up->sequence) || - put_user(kp->reserved2, &up->reserved2) || - put_user(kp->reserved, &up->reserved) || - put_user(kp->length, &up->length)) - return -EFAULT; + put_user(kp->field, &up->field) || + put_user(kp->timestamp.tv_sec, &up->timestamp.tv_sec) || + put_user(kp->timestamp.tv_usec, &up->timestamp.tv_usec) || + copy_to_user(&up->timecode, &kp->timecode, sizeof(struct v4l2_timecode)) || + put_user(kp->sequence, &up->sequence) || + put_user(kp->reserved2, &up->reserved2) || + put_user(kp->reserved, &up->reserved) || + put_user(kp->length, &up->length)) + return -EFAULT;

if (V4L2_TYPE_IS_MULTIPLANAR(kp->type)) { num_planes = kp->length; @@ -552,11 +552,11 @@ static int get_v4l2_framebuffer32(struct u32 tmp;

if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_framebuffer32)) || - get_user(tmp, &up->base) || - get_user(kp->capability, &up->capability) || - get_user(kp->flags, &up->flags) || - copy_from_user(&kp->fmt, &up->fmt, sizeof(up->fmt))) - return -EFAULT; + get_user(tmp, &up->base) || + get_user(kp->capability, &up->capability) || + get_user(kp->flags, &up->flags) || + copy_from_user(&kp->fmt, &up->fmt, sizeof(up->fmt))) + return -EFAULT; kp->base = (__force void *)compat_ptr(tmp); return 0; } @@ -566,11 +566,11 @@ static int put_v4l2_framebuffer32(struct u32 tmp = (u32)((unsigned long)kp->base);

if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_framebuffer32)) || - put_user(tmp, &up->base) || - put_user(kp->capability, &up->capability) || - put_user(kp->flags, &up->flags) || - copy_to_user(&up->fmt, &kp->fmt, sizeof(up->fmt))) - return -EFAULT; + put_user(tmp, &up->base) || + put_user(kp->capability, &up->capability) || + put_user(kp->flags, &up->flags) || + copy_to_user(&up->fmt, &kp->fmt, sizeof(up->fmt))) + return -EFAULT; return 0; }

@@ -602,11 +602,11 @@ static inline int put_v4l2_input32(struc }

struct v4l2_ext_controls32 { - __u32 ctrl_class; - __u32 count; - __u32 error_idx; - __u32 reserved[2]; - compat_caddr_t controls; /* actually struct v4l2_ext_control32 * */ + __u32 ctrl_class; + __u32 count; + __u32 error_idx; + __u32 reserved[2]; + compat_caddr_t controls; /* actually struct v4l2_ext_control32 * */ };

struct v4l2_ext_control32 { @@ -645,11 +645,11 @@ static int get_v4l2_ext_controls32(struc compat_caddr_t p;

if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_ext_controls32)) || - get_user(kp->ctrl_class, &up->ctrl_class) || - get_user(kp->count, &up->count) || - get_user(kp->error_idx, &up->error_idx) || - copy_from_user(kp->reserved, up->reserved, sizeof(kp->reserved))) - return -EFAULT; + get_user(kp->ctrl_class, &up->ctrl_class) || + get_user(kp->count, &up->count) || + get_user(kp->error_idx, &up->error_idx) || + copy_from_user(kp->reserved, up->reserved, sizeof(kp->reserved))) + return -EFAULT; n = kp->count; if (n == 0) { kp->controls = NULL; @@ -659,7 +659,7 @@ static int get_v4l2_ext_controls32(struc return -EFAULT; ucontrols = compat_ptr(p); if (!access_ok(VERIFY_READ, ucontrols, - n * sizeof(struct v4l2_ext_control32))) + n * sizeof(struct v4l2_ext_control32))) return -EFAULT; kcontrols = compat_alloc_user_space(n * sizeof(struct v4l2_ext_control)); kp->controls = (__force struct v4l2_ext_control *)kcontrols; @@ -694,11 +694,11 @@ static int put_v4l2_ext_controls32(struc compat_caddr_t p;

if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_ext_controls32)) || - put_user(kp->ctrl_class, &up->ctrl_class) || - put_user(kp->count, &up->count) || - put_user(kp->error_idx, &up->error_idx) || - copy_to_user(up->reserved, kp->reserved, sizeof(up->reserved))) - return -EFAULT; + put_user(kp->ctrl_class, &up->ctrl_class) || + put_user(kp->count, &up->count) || + put_user(kp->error_idx, &up->error_idx) || + copy_to_user(up->reserved, kp->reserved, sizeof(up->reserved))) + return -EFAULT; if (!kp->count) return 0;

@@ -706,7 +706,7 @@ static int put_v4l2_ext_controls32(struc return -EFAULT; ucontrols = compat_ptr(p); if (!access_ok(VERIFY_WRITE, ucontrols, - n * sizeof(struct v4l2_ext_control32))) + n * sizeof(struct v4l2_ext_control32))) return -EFAULT;

while (--n >= 0) { @@ -743,15 +743,15 @@ struct v4l2_event32 { static int put_v4l2_event32(struct v4l2_event *kp, struct v4l2_event32 __user *up) { if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_event32)) || - put_user(kp->type, &up->type) || - copy_to_user(&up->u, &kp->u, sizeof(kp->u)) || - put_user(kp->pending, &up->pending) || - put_user(kp->sequence, &up->sequence) || - put_user(kp->timestamp.tv_sec, &up->timestamp.tv_sec) || - put_user(kp->timestamp.tv_nsec, &up->timestamp.tv_nsec) || - put_user(kp->id, &up->id) || - copy_to_user(up->reserved, kp->reserved, 8 * sizeof(__u32))) - return -EFAULT; + put_user(kp->type, &up->type) || + copy_to_user(&up->u, &kp->u, sizeof(kp->u)) || + put_user(kp->pending, &up->pending) || + put_user(kp->sequence, &up->sequence) || + put_user(kp->timestamp.tv_sec, &up->timestamp.tv_sec) || + put_user(kp->timestamp.tv_nsec, &up->timestamp.tv_nsec) || + put_user(kp->id, &up->id) || + copy_to_user(up->reserved, kp->reserved, 8 * sizeof(__u32))) + return -EFAULT; return 0; }

@@ -768,12 +768,12 @@ static int get_v4l2_edid32(struct v4l2_e u32 tmp;

if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_edid32)) || - get_user(kp->pad, &up->pad) || - get_user(kp->start_block, &up->start_block) || - get_user(kp->blocks, &up->blocks) || - get_user(tmp, &up->edid) || - copy_from_user(kp->reserved, up->reserved, sizeof(kp->reserved))) - return -EFAULT; + get_user(kp->pad, &up->pad) || + get_user(kp->start_block, &up->start_block) || + get_user(kp->blocks, &up->blocks) || + get_user(tmp, &up->edid) || + copy_from_user(kp->reserved, up->reserved, sizeof(kp->reserved))) + return -EFAULT; kp->edid = (__force u8 *)compat_ptr(tmp); return 0; } @@ -783,12 +783,12 @@ static int put_v4l2_edid32(struct v4l2_e u32 tmp = (u32)((unsigned long)kp->edid);

if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_edid32)) || - put_user(kp->pad, &up->pad) || - put_user(kp->start_block, &up->start_block) || - put_user(kp->blocks, &up->blocks) || - put_user(tmp, &up->edid) || - copy_to_user(up->reserved, kp->reserved, sizeof(up->reserved))) - return -EFAULT; + put_user(kp->pad, &up->pad) || + put_user(kp->start_block, &up->start_block) || + put_user(kp->blocks, &up->blocks) || + put_user(tmp, &up->edid) || + copy_to_user(up->reserved, kp->reserved, sizeof(up->reserved))) + return -EFAULT; return 0; }

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Hans Verkuil hans.verkuil@cisco.com

commit 333b1e9f96ce05f7498b581509bb30cde03018bf upstream.

Instead of doing sizeof(struct foo) use sizeof(*up). There even were cases where 4 * sizeof(__u32) was used instead of sizeof(kp->reserved), which is very dangerous when the size of the reserved array changes.

Signed-off-by: Hans Verkuil hans.verkuil@cisco.com Acked-by: Sakari Ailus sakari.ailus@linux.intel.com Signed-off-by: Mauro Carvalho Chehab mchehab@s-opensource.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Mauro Carvalho Chehab mchehab@s-opensource.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/media/v4l2-core/v4l2-compat-ioctl32.c | 80 ++++++++++++-------------- 1 file changed, 38 insertions(+), 42 deletions(-)

--- a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c +++ b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c @@ -47,7 +47,7 @@ struct v4l2_window32 {

static int get_v4l2_window32(struct v4l2_window *kp, struct v4l2_window32 __user *up) { - if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_window32)) || + if (!access_ok(VERIFY_READ, up, sizeof(*up)) || copy_from_user(&kp->w, &up->w, sizeof(up->w)) || get_user(kp->field, &up->field) || get_user(kp->chromakey, &up->chromakey) || @@ -64,7 +64,7 @@ static int get_v4l2_window32(struct v4l2 if (get_user(p, &up->clips)) return -EFAULT; uclips = compat_ptr(p); - kclips = compat_alloc_user_space(n * sizeof(struct v4l2_clip)); + kclips = compat_alloc_user_space(n * sizeof(*kclips)); kp->clips = kclips; while (--n >= 0) { if (copy_in_user(&kclips->c, &uclips->c, sizeof(uclips->c))) @@ -152,14 +152,14 @@ static int __get_v4l2_format32(struct v4

static int get_v4l2_format32(struct v4l2_format *kp, struct v4l2_format32 __user *up) { - if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_format32))) + if (!access_ok(VERIFY_READ, up, sizeof(*up))) return -EFAULT; return __get_v4l2_format32(kp, up); }

static int get_v4l2_create32(struct v4l2_create_buffers *kp, struct v4l2_create_buffers32 __user *up) { - if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_create_buffers32)) || + if (!access_ok(VERIFY_READ, up, sizeof(*up)) || copy_from_user(kp, up, offsetof(struct v4l2_create_buffers32, format))) return -EFAULT; return __get_v4l2_format32(&kp->format, &up->format); @@ -196,17 +196,17 @@ static int __put_v4l2_format32(struct v4

static int put_v4l2_format32(struct v4l2_format *kp, struct v4l2_format32 __user *up) { - if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_format32)) || - put_user(kp->type, &up->type)) + if (!access_ok(VERIFY_WRITE, up, sizeof(*up))) return -EFAULT; return __put_v4l2_format32(kp, up); }

static int put_v4l2_create32(struct v4l2_create_buffers *kp, struct v4l2_create_buffers32 __user *up) { - if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_create_buffers32)) || - copy_to_user(up, kp, offsetof(struct v4l2_create_buffers32, format.fmt))) - return -EFAULT; + if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) || + copy_to_user(up, kp, offsetof(struct v4l2_create_buffers32, format)) || + copy_to_user(up->reserved, kp->reserved, sizeof(kp->reserved))) + return -EFAULT; return __put_v4l2_format32(&kp->format, &up->format); }

@@ -222,7 +222,7 @@ struct v4l2_standard32 { static int get_v4l2_standard32(struct v4l2_standard *kp, struct v4l2_standard32 __user *up) { /* other fields are not set by the user, nor used by the driver */ - if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_standard32)) || + if (!access_ok(VERIFY_READ, up, sizeof(*up)) || get_user(kp->index, &up->index)) return -EFAULT; return 0; @@ -230,13 +230,13 @@ static int get_v4l2_standard32(struct v4

static int put_v4l2_standard32(struct v4l2_standard *kp, struct v4l2_standard32 __user *up) { - if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_standard32)) || + if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) || put_user(kp->index, &up->index) || copy_to_user(up->id, &kp->id, sizeof(__u64)) || - copy_to_user(up->name, kp->name, 24) || + copy_to_user(up->name, kp->name, sizeof(up->name)) || copy_to_user(&up->frameperiod, &kp->frameperiod, sizeof(kp->frameperiod)) || put_user(kp->framelines, &up->framelines) || - copy_to_user(up->reserved, kp->reserved, 4 * sizeof(__u32))) + copy_to_user(up->reserved, kp->reserved, sizeof(kp->reserved))) return -EFAULT; return 0; } @@ -284,7 +284,7 @@ static int get_v4l2_plane32(struct v4l2_

if (copy_in_user(up, up32, 2 * sizeof(__u32)) || copy_in_user(&up->data_offset, &up32->data_offset, - sizeof(__u32))) + sizeof(up->data_offset))) return -EFAULT;

if (memory == V4L2_MEMORY_USERPTR) { @@ -294,11 +294,11 @@ static int get_v4l2_plane32(struct v4l2_ if (put_user((unsigned long)up_pln, &up->m.userptr)) return -EFAULT; } else if (memory == V4L2_MEMORY_DMABUF) { - if (copy_in_user(&up->m.fd, &up32->m.fd, sizeof(int))) + if (copy_in_user(&up->m.fd, &up32->m.fd, sizeof(up32->m.fd))) return -EFAULT; } else { if (copy_in_user(&up->m.mem_offset, &up32->m.mem_offset, - sizeof(__u32))) + sizeof(up32->m.mem_offset))) return -EFAULT; }

@@ -310,19 +310,19 @@ static int put_v4l2_plane32(struct v4l2_ { if (copy_in_user(up32, up, 2 * sizeof(__u32)) || copy_in_user(&up32->data_offset, &up->data_offset, - sizeof(__u32))) + sizeof(up->data_offset))) return -EFAULT;

/* For MMAP, driver might've set up the offset, so copy it back. * USERPTR stays the same (was userspace-provided), so no copying. */ if (memory == V4L2_MEMORY_MMAP) if (copy_in_user(&up32->m.mem_offset, &up->m.mem_offset, - sizeof(__u32))) + sizeof(up->m.mem_offset))) return -EFAULT; /* For DMABUF, driver might've set up the fd, so copy it back. */ if (memory == V4L2_MEMORY_DMABUF) if (copy_in_user(&up32->m.fd, &up->m.fd, - sizeof(int))) + sizeof(up->m.fd))) return -EFAULT;

return 0; @@ -336,7 +336,7 @@ static int get_v4l2_buffer32(struct v4l2 int num_planes; int ret;

- if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_buffer32)) || + if (!access_ok(VERIFY_READ, up, sizeof(*up)) || get_user(kp->index, &up->index) || get_user(kp->type, &up->type) || get_user(kp->flags, &up->flags) || @@ -348,8 +348,7 @@ static int get_v4l2_buffer32(struct v4l2 if (get_user(kp->bytesused, &up->bytesused) || get_user(kp->field, &up->field) || get_user(kp->timestamp.tv_sec, &up->timestamp.tv_sec) || - get_user(kp->timestamp.tv_usec, - &up->timestamp.tv_usec)) + get_user(kp->timestamp.tv_usec, &up->timestamp.tv_usec)) return -EFAULT;

if (V4L2_TYPE_IS_MULTIPLANAR(kp->type)) { @@ -366,13 +365,12 @@ static int get_v4l2_buffer32(struct v4l2

uplane32 = compat_ptr(p); if (!access_ok(VERIFY_READ, uplane32, - num_planes * sizeof(struct v4l2_plane32))) + num_planes * sizeof(*uplane32))) return -EFAULT;

/* We don't really care if userspace decides to kill itself * by passing a very big num_planes value */ - uplane = compat_alloc_user_space(num_planes * - sizeof(struct v4l2_plane)); + uplane = compat_alloc_user_space(num_planes * sizeof(*uplane)); kp->m.planes = (__force struct v4l2_plane *)uplane;

while (--num_planes >= 0) { @@ -420,7 +418,7 @@ static int put_v4l2_buffer32(struct v4l2 int num_planes; int ret;

- if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_buffer32)) || + if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) || put_user(kp->index, &up->index) || put_user(kp->type, &up->type) || put_user(kp->flags, &up->flags) || @@ -431,7 +429,7 @@ static int put_v4l2_buffer32(struct v4l2 put_user(kp->field, &up->field) || put_user(kp->timestamp.tv_sec, &up->timestamp.tv_sec) || put_user(kp->timestamp.tv_usec, &up->timestamp.tv_usec) || - copy_to_user(&up->timecode, &kp->timecode, sizeof(struct v4l2_timecode)) || + copy_to_user(&up->timecode, &kp->timecode, sizeof(kp->timecode)) || put_user(kp->sequence, &up->sequence) || put_user(kp->reserved2, &up->reserved2) || put_user(kp->reserved, &up->reserved) || @@ -499,7 +497,7 @@ static int get_v4l2_framebuffer32(struct { u32 tmp;

- if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_framebuffer32)) || + if (!access_ok(VERIFY_READ, up, sizeof(*up)) || get_user(tmp, &up->base) || get_user(kp->capability, &up->capability) || get_user(kp->flags, &up->flags) || @@ -513,7 +511,7 @@ static int put_v4l2_framebuffer32(struct { u32 tmp = (u32)((unsigned long)kp->base);

- if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_framebuffer32)) || + if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) || put_user(tmp, &up->base) || put_user(kp->capability, &up->capability) || put_user(kp->flags, &up->flags) || @@ -537,14 +535,14 @@ struct v4l2_input32 { Otherwise it is identical to the 32-bit version. */ static inline int get_v4l2_input32(struct v4l2_input *kp, struct v4l2_input32 __user *up) { - if (copy_from_user(kp, up, sizeof(struct v4l2_input32))) + if (copy_from_user(kp, up, sizeof(*up))) return -EFAULT; return 0; }

static inline int put_v4l2_input32(struct v4l2_input *kp, struct v4l2_input32 __user *up) { - if (copy_to_user(up, kp, sizeof(struct v4l2_input32))) + if (copy_to_user(up, kp, sizeof(*up))) return -EFAULT; return 0; } @@ -592,7 +590,7 @@ static int get_v4l2_ext_controls32(struc int n; compat_caddr_t p;

- if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_ext_controls32)) || + if (!access_ok(VERIFY_READ, up, sizeof(*up)) || get_user(kp->ctrl_class, &up->ctrl_class) || get_user(kp->count, &up->count) || get_user(kp->error_idx, &up->error_idx) || @@ -606,10 +604,9 @@ static int get_v4l2_ext_controls32(struc if (get_user(p, &up->controls)) return -EFAULT; ucontrols = compat_ptr(p); - if (!access_ok(VERIFY_READ, ucontrols, - n * sizeof(struct v4l2_ext_control32))) + if (!access_ok(VERIFY_READ, ucontrols, n * sizeof(*ucontrols))) return -EFAULT; - kcontrols = compat_alloc_user_space(n * sizeof(struct v4l2_ext_control)); + kcontrols = compat_alloc_user_space(n * sizeof(*kcontrols)); kp->controls = (__force struct v4l2_ext_control *)kcontrols; while (--n >= 0) { u32 id; @@ -641,7 +638,7 @@ static int put_v4l2_ext_controls32(struc int n = kp->count; compat_caddr_t p;

- if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_ext_controls32)) || + if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) || put_user(kp->ctrl_class, &up->ctrl_class) || put_user(kp->count, &up->count) || put_user(kp->error_idx, &up->error_idx) || @@ -653,8 +650,7 @@ static int put_v4l2_ext_controls32(struc if (get_user(p, &up->controls)) return -EFAULT; ucontrols = compat_ptr(p); - if (!access_ok(VERIFY_WRITE, ucontrols, - n * sizeof(struct v4l2_ext_control32))) + if (!access_ok(VERIFY_WRITE, ucontrols, n * sizeof(*ucontrols))) return -EFAULT;

while (--n >= 0) { @@ -690,7 +686,7 @@ struct v4l2_event32 {

static int put_v4l2_event32(struct v4l2_event *kp, struct v4l2_event32 __user *up) { - if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_event32)) || + if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) || put_user(kp->type, &up->type) || copy_to_user(&up->u, &kp->u, sizeof(kp->u)) || put_user(kp->pending, &up->pending) || @@ -698,7 +694,7 @@ static int put_v4l2_event32(struct v4l2_ put_user(kp->timestamp.tv_sec, &up->timestamp.tv_sec) || put_user(kp->timestamp.tv_nsec, &up->timestamp.tv_nsec) || put_user(kp->id, &up->id) || - copy_to_user(up->reserved, kp->reserved, 8 * sizeof(__u32))) + copy_to_user(up->reserved, kp->reserved, sizeof(kp->reserved))) return -EFAULT; return 0; } @@ -715,7 +711,7 @@ static int get_v4l2_edid32(struct v4l2_e { u32 tmp;

- if (!access_ok(VERIFY_READ, up, sizeof(struct v4l2_edid32)) || + if (!access_ok(VERIFY_READ, up, sizeof(*up)) || get_user(kp->pad, &up->pad) || get_user(kp->start_block, &up->start_block) || get_user(kp->blocks, &up->blocks) || @@ -730,7 +726,7 @@ static int put_v4l2_edid32(struct v4l2_e { u32 tmp = (u32)((unsigned long)kp->edid);

- if (!access_ok(VERIFY_WRITE, up, sizeof(struct v4l2_edid32)) || + if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) || put_user(kp->pad, &up->pad) || put_user(kp->start_block, &up->start_block) || put_user(kp->blocks, &up->blocks) ||

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Hans Verkuil hans.verkuil@cisco.com

commit b8c601e8af2d08f733d74defa8465303391bb930 upstream.

ctrl_is_pointer just hardcoded two known string controls, but that caused problems when using e.g. custom controls that use a pointer for the payload.

Reimplement this function: it now finds the v4l2_ctrl (if the driver uses the control framework) or it calls vidioc_query_ext_ctrl (if the driver implements that directly).

In both cases it can now check if the control is a pointer control or not.

Signed-off-by: Hans Verkuil hans.verkuil@cisco.com Acked-by: Sakari Ailus sakari.ailus@linux.intel.com Signed-off-by: Mauro Carvalho Chehab mchehab@s-opensource.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/media/v4l2-core/v4l2-compat-ioctl32.c | 59 +++++++++++++++++--------- 1 file changed, 39 insertions(+), 20 deletions(-)

--- a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c +++ b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c @@ -18,6 +18,8 @@ #include <linux/videodev2.h> #include <linux/v4l2-subdev.h> #include <media/v4l2-dev.h> +#include <media/v4l2-fh.h> +#include <media/v4l2-ctrls.h> #include <media/v4l2-ioctl.h>

static long native_ioctl(struct file *file, unsigned int cmd, unsigned long arg) @@ -575,24 +577,39 @@ struct v4l2_ext_control32 { }; } __attribute__ ((packed));

-/* The following function really belong in v4l2-common, but that causes - a circular dependency between modules. We need to think about this, but - for now this will do. */ - -/* Return non-zero if this control is a pointer type. Currently only - type STRING is a pointer type. */ -static inline int ctrl_is_pointer(u32 id) -{ - switch (id) { - case V4L2_CID_RDS_TX_PS_NAME: - case V4L2_CID_RDS_TX_RADIO_TEXT: - return 1; - default: - return 0; +/* Return true if this control is a pointer type. */ +static inline bool ctrl_is_pointer(struct file *file, u32 id) +{ + struct video_device *vdev = video_devdata(file); + struct v4l2_fh *fh = NULL; + struct v4l2_ctrl_handler *hdl = NULL; + struct v4l2_query_ext_ctrl qec = { id }; + const struct v4l2_ioctl_ops *ops = vdev->ioctl_ops; + + if (test_bit(V4L2_FL_USES_V4L2_FH, &vdev->flags)) + fh = file->private_data; + + if (fh && fh->ctrl_handler) + hdl = fh->ctrl_handler; + else if (vdev->ctrl_handler) + hdl = vdev->ctrl_handler; + + if (hdl) { + struct v4l2_ctrl *ctrl = v4l2_ctrl_find(hdl, id); + + return ctrl && ctrl->is_ptr; } + + if (!ops->vidioc_query_ext_ctrl) + return false; + + return !ops->vidioc_query_ext_ctrl(file, fh, &qec) && + (qec.flags & V4L2_CTRL_FLAG_HAS_PAYLOAD); }

-static int get_v4l2_ext_controls32(struct v4l2_ext_controls *kp, struct v4l2_ext_controls32 __user *up) +static int get_v4l2_ext_controls32(struct file *file, + struct v4l2_ext_controls *kp, + struct v4l2_ext_controls32 __user *up) { struct v4l2_ext_control32 __user *ucontrols; struct v4l2_ext_control __user *kcontrols; @@ -624,7 +641,7 @@ static int get_v4l2_ext_controls32(struc return -EFAULT; if (get_user(id, &kcontrols->id)) return -EFAULT; - if (ctrl_is_pointer(id)) { + if (ctrl_is_pointer(file, id)) { void __user *s;

if (get_user(p, &ucontrols->string)) @@ -639,7 +656,9 @@ static int get_v4l2_ext_controls32(struc return 0; }

-static int put_v4l2_ext_controls32(struct v4l2_ext_controls *kp, struct v4l2_ext_controls32 __user *up) +static int put_v4l2_ext_controls32(struct file *file, + struct v4l2_ext_controls *kp, + struct v4l2_ext_controls32 __user *up) { struct v4l2_ext_control32 __user *ucontrols; struct v4l2_ext_control __user *kcontrols = @@ -671,7 +690,7 @@ static int put_v4l2_ext_controls32(struc /* Do not modify the pointer when copying a pointer control. The contents of the pointer was changed, not the pointer itself. */ - if (ctrl_is_pointer(id)) + if (ctrl_is_pointer(file, id)) size -= sizeof(ucontrols->value64); if (copy_in_user(ucontrols, kcontrols, size)) return -EFAULT; @@ -884,7 +903,7 @@ static long do_video_ioctl(struct file * case VIDIOC_G_EXT_CTRLS: case VIDIOC_S_EXT_CTRLS: case VIDIOC_TRY_EXT_CTRLS: - err = get_v4l2_ext_controls32(&karg.v2ecs, up); + err = get_v4l2_ext_controls32(file, &karg.v2ecs, up); compatible_arg = 0; break; case VIDIOC_DQEVENT: @@ -911,7 +930,7 @@ static long do_video_ioctl(struct file * case VIDIOC_G_EXT_CTRLS: case VIDIOC_S_EXT_CTRLS: case VIDIOC_TRY_EXT_CTRLS: - if (put_v4l2_ext_controls32(&karg.v2ecs, up)) + if (put_v4l2_ext_controls32(file, &karg.v2ecs, up)) err = -EFAULT; break; }

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Daniel Mentz danielmentz@google.com

commit 025a26fa14f8fd55d50ab284a30c016a5be953d0 upstream.

Commit b2787845fb91 ("V4L/DVB (5289): Add support for video output overlays.") added the field global_alpha to struct v4l2_window but did not update the compat layer accordingly. This change adds global_alpha to struct v4l2_window32 and copies the value for global_alpha back and forth.

Signed-off-by: Daniel Mentz danielmentz@google.com Signed-off-by: Hans Verkuil hans.verkuil@cisco.com Signed-off-by: Mauro Carvalho Chehab mchehab@s-opensource.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/media/v4l2-core/v4l2-compat-ioctl32.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)

--- a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c +++ b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c @@ -45,6 +45,7 @@ struct v4l2_window32 { compat_caddr_t clips; /* actually struct v4l2_clip32 * */ __u32 clipcount; compat_caddr_t bitmap; + __u8 global_alpha; };

static int get_v4l2_window32(struct v4l2_window *kp, struct v4l2_window32 __user *up) @@ -53,7 +54,8 @@ static int get_v4l2_window32(struct v4l2 copy_from_user(&kp->w, &up->w, sizeof(up->w)) || get_user(kp->field, &up->field) || get_user(kp->chromakey, &up->chromakey) || - get_user(kp->clipcount, &up->clipcount)) + get_user(kp->clipcount, &up->clipcount) || + get_user(kp->global_alpha, &up->global_alpha)) return -EFAULT; if (kp->clipcount > 2048) return -EINVAL; @@ -86,7 +88,8 @@ static int put_v4l2_window32(struct v4l2 if (copy_to_user(&up->w, &kp->w, sizeof(kp->w)) || put_user(kp->field, &up->field) || put_user(kp->chromakey, &up->chromakey) || - put_user(kp->clipcount, &up->clipcount)) + put_user(kp->clipcount, &up->clipcount) || + put_user(kp->global_alpha, &up->global_alpha)) return -EFAULT; return 0; }

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Hans Verkuil hans.verkuil@cisco.com

commit 169f24ca68bf0f247d111aef07af00dd3a02ae88 upstream.

There is nothing wrong with using an unknown buffer type. So stop spamming the kernel log whenever this happens. The kernel will just return -EINVAL to signal this.

Signed-off-by: Hans Verkuil hans.verkuil@cisco.com Acked-by: Sakari Ailus sakari.ailus@linux.intel.com Signed-off-by: Mauro Carvalho Chehab mchehab@s-opensource.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/media/v4l2-core/v4l2-compat-ioctl32.c | 4 ---- 1 file changed, 4 deletions(-)

--- a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c +++ b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c @@ -170,8 +170,6 @@ static int __get_v4l2_format32(struct v4 return copy_from_user(&kp->fmt.sliced, &up->fmt.sliced, sizeof(kp->fmt.sliced)) ? -EFAULT : 0; default: - printk(KERN_INFO "compat_ioctl32: unexpected VIDIOC_FMT type %d\n", - kp->type); return -EINVAL; } } @@ -214,8 +212,6 @@ static int __put_v4l2_format32(struct v4 return copy_to_user(&up->fmt.sliced, &kp->fmt.sliced, sizeof(kp->fmt.sliced)) ? -EFAULT : 0; default: - printk(KERN_INFO "compat_ioctl32: unexpected VIDIOC_FMT type %d\n", - kp->type); return -EINVAL; } }

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Daniel Mentz danielmentz@google.com

commit a1dfb4c48cc1e64eeb7800a27c66a6f7e88d075a upstream.

The 32-bit compat v4l2 ioctl handling is implemented based on its 64-bit equivalent. It converts 32-bit data structures into its 64-bit equivalents and needs to provide the data to the 64-bit ioctl in user space memory which is commonly allocated using compat_alloc_user_space().

However, due to how that function is implemented, it can only be called a single time for every syscall invocation.

Supposedly to avoid this limitation, the existing code uses a mix of memory from the kernel stack and memory allocated through compat_alloc_user_space().

Under normal circumstances, this would not work, because the 64-bit ioctl expects all pointers to point to user space memory. As a workaround, set_fs(KERNEL_DS) is called to temporarily disable this extra safety check and allow kernel pointers. However, this might introduce a security vulnerability: The result of the 32-bit to 64-bit conversion is writeable by user space because the output buffer has been allocated via compat_alloc_user_space(). A malicious user space process could then manipulate pointers inside this output buffer, and due to the previous set_fs(KERNEL_DS) call, functions like get_user() or put_user() no longer prevent kernel memory access.

The new approach is to pre-calculate the total amount of user space memory that is needed, allocate it using compat_alloc_user_space() and then divide up the allocated memory to accommodate all data structures that need to be converted.

An alternative approach would have been to retain the union type karg that they allocated on the kernel stack in do_video_ioctl(), copy all data from user space into karg and then back to user space. However, we decided against this approach because it does not align with other compat syscall implementations. Instead, we tried to replicate the get_user/put_user pairs as found in other places in the kernel:

if (get_user(clipcount, &up->clipcount) || put_user(clipcount, &kp->clipcount)) return -EFAULT;

Notes from hans.verkuil@cisco.com:

This patch was taken from: https://github.com/LineageOS/android_kernel_samsung_apq8084/commit/97b733953...

Clearly nobody could be bothered to upstream this patch or at minimum tell us :-( We only heard about this a week ago.

This patch was rebased and cleaned up. Compared to the original I also swapped the order of the convert_in_user arguments so that they matched copy_in_user. It was hard to review otherwise. I also replaced the ALLOC_USER_SPACE/ALLOC_AND_GET by a normal function.

Fixes: 6b5a9492ca ("v4l: introduce string control support.")

Signed-off-by: Daniel Mentz danielmentz@google.com Co-developed-by: Hans Verkuil hans.verkuil@cisco.com Acked-by: Sakari Ailus sakari.ailus@linux.intel.com Signed-off-by: Hans Verkuil hans.verkuil@cisco.com Signed-off-by: Mauro Carvalho Chehab mchehab@s-opensource.com Signed-off-by: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/media/v4l2-core/v4l2-compat-ioctl32.c | 757 ++++++++++++++++---------- 1 file changed, 491 insertions(+), 266 deletions(-)

--- a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c +++ b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c @@ -22,6 +22,14 @@ #include <media/v4l2-ctrls.h> #include <media/v4l2-ioctl.h>

+/* Use the same argument order as copy_in_user */ +#define assign_in_user(to, from) \ +({ \ + typeof(*from) __assign_tmp; \ + \ + get_user(__assign_tmp, from) || put_user(__assign_tmp, to); \ +}) + static long native_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { long ret = -ENOIOCTLCMD; @@ -35,12 +43,12 @@ static long native_ioctl(struct file *fi

struct v4l2_clip32 { struct v4l2_rect c; - compat_caddr_t next; + compat_caddr_t next; };

struct v4l2_window32 { struct v4l2_rect w; - __u32 field; /* enum v4l2_field */ + __u32 field; /* enum v4l2_field */ __u32 chromakey; compat_caddr_t clips; /* actually struct v4l2_clip32 * */ __u32 clipcount; @@ -48,37 +56,41 @@ struct v4l2_window32 { __u8 global_alpha; };

-static int get_v4l2_window32(struct v4l2_window *kp, struct v4l2_window32 __user *up) +static int get_v4l2_window32(struct v4l2_window __user *kp, + struct v4l2_window32 __user *up, + void __user *aux_buf, u32 aux_space) { struct v4l2_clip32 __user *uclips; struct v4l2_clip __user *kclips; compat_caddr_t p; - u32 n; + u32 clipcount;

if (!access_ok(VERIFY_READ, up, sizeof(*up)) || - copy_from_user(&kp->w, &up->w, sizeof(up->w)) || - get_user(kp->field, &up->field) || - get_user(kp->chromakey, &up->chromakey) || - get_user(kp->clipcount, &up->clipcount) || - get_user(kp->global_alpha, &up->global_alpha)) + copy_in_user(&kp->w, &up->w, sizeof(up->w)) || + assign_in_user(&kp->field, &up->field) || + assign_in_user(&kp->chromakey, &up->chromakey) || + assign_in_user(&kp->global_alpha, &up->global_alpha) || + get_user(clipcount, &up->clipcount) || + put_user(clipcount, &kp->clipcount)) return -EFAULT; - if (kp->clipcount > 2048) + if (clipcount > 2048) return -EINVAL; - if (!kp->clipcount) { - kp->clips = NULL; - return 0; - } + if (!clipcount) + return put_user(NULL, &kp->clips);

- n = kp->clipcount; if (get_user(p, &up->clips)) return -EFAULT; uclips = compat_ptr(p); - kclips = compat_alloc_user_space(n * sizeof(*kclips)); - kp->clips = kclips; - while (n--) { + if (aux_space < clipcount * sizeof(*kclips)) + return -EFAULT; + kclips = aux_buf; + if (put_user(kclips, &kp->clips)) + return -EFAULT; + + while (clipcount--) { if (copy_in_user(&kclips->c, &uclips->c, sizeof(uclips->c))) return -EFAULT; - if (put_user(n ? kclips + 1 : NULL, &kclips->next)) + if (put_user(clipcount ? kclips + 1 : NULL, &kclips->next)) return -EFAULT; uclips++; kclips++; @@ -86,27 +98,28 @@ static int get_v4l2_window32(struct v4l2 return 0; }

-static int put_v4l2_window32(struct v4l2_window *kp, struct v4l2_window32 __user *up) +static int put_v4l2_window32(struct v4l2_window __user *kp, + struct v4l2_window32 __user *up) { struct v4l2_clip __user *kclips = kp->clips; struct v4l2_clip32 __user *uclips; - u32 n = kp->clipcount; compat_caddr_t p; + u32 clipcount;

- if (copy_to_user(&up->w, &kp->w, sizeof(kp->w)) || - put_user(kp->field, &up->field) || - put_user(kp->chromakey, &up->chromakey) || - put_user(kp->clipcount, &up->clipcount) || - put_user(kp->global_alpha, &up->global_alpha)) + if (copy_in_user(&up->w, &kp->w, sizeof(kp->w)) || + assign_in_user(&up->field, &kp->field) || + assign_in_user(&up->chromakey, &kp->chromakey) || + assign_in_user(&up->global_alpha, &kp->global_alpha) || + get_user(clipcount, &kp->clipcount) || + put_user(clipcount, &up->clipcount)) return -EFAULT; - - if (!kp->clipcount) + if (!clipcount) return 0;

if (get_user(p, &up->clips)) return -EFAULT; uclips = compat_ptr(p); - while (n--) { + while (clipcount--) { if (copy_in_user(&uclips->c, &kclips->c, sizeof(uclips->c))) return -EFAULT; uclips++; @@ -144,90 +157,150 @@ struct v4l2_create_buffers32 { __u32 reserved[8]; };

-static int __get_v4l2_format32(struct v4l2_format *kp, struct v4l2_format32 __user *up) +static int __bufsize_v4l2_format(struct v4l2_format32 __user *up, u32 *size) +{ + u32 type; + + if (get_user(type, &up->type)) + return -EFAULT; + + switch (type) { + case V4L2_BUF_TYPE_VIDEO_OVERLAY: + case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY: { + u32 clipcount; + + if (get_user(clipcount, &up->fmt.win.clipcount)) + return -EFAULT; + if (clipcount > 2048) + return -EINVAL; + *size = clipcount * sizeof(struct v4l2_clip); + return 0; + } + default: + *size = 0; + return 0; + } +} + +static int bufsize_v4l2_format(struct v4l2_format32 __user *up, u32 *size) { - if (get_user(kp->type, &up->type)) + if (!access_ok(VERIFY_READ, up, sizeof(*up))) return -EFAULT; + return __bufsize_v4l2_format(up, size); +}

- switch (kp->type) { +static int __get_v4l2_format32(struct v4l2_format __user *kp, + struct v4l2_format32 __user *up, + void __user *aux_buf, u32 aux_space) +{ + u32 type; + + if (get_user(type, &up->type) || put_user(type, &kp->type)) + return -EFAULT; + + switch (type) { case V4L2_BUF_TYPE_VIDEO_CAPTURE: case V4L2_BUF_TYPE_VIDEO_OUTPUT: - return copy_from_user(&kp->fmt.pix, &up->fmt.pix, - sizeof(kp->fmt.pix)) ? -EFAULT : 0; + return copy_in_user(&kp->fmt.pix, &up->fmt.pix, + sizeof(kp->fmt.pix)) ? -EFAULT : 0; case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE: case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE: - return copy_from_user(&kp->fmt.pix_mp, &up->fmt.pix_mp, - sizeof(kp->fmt.pix_mp)) ? -EFAULT : 0; + return copy_in_user(&kp->fmt.pix_mp, &up->fmt.pix_mp, + sizeof(kp->fmt.pix_mp)) ? -EFAULT : 0; case V4L2_BUF_TYPE_VIDEO_OVERLAY: case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY: - return get_v4l2_window32(&kp->fmt.win, &up->fmt.win); + return get_v4l2_window32(&kp->fmt.win, &up->fmt.win, + aux_buf, aux_space); case V4L2_BUF_TYPE_VBI_CAPTURE: case V4L2_BUF_TYPE_VBI_OUTPUT: - return copy_from_user(&kp->fmt.vbi, &up->fmt.vbi, - sizeof(kp->fmt.vbi)) ? -EFAULT : 0; + return copy_in_user(&kp->fmt.vbi, &up->fmt.vbi, + sizeof(kp->fmt.vbi)) ? -EFAULT : 0; case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE: case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT: - return copy_from_user(&kp->fmt.sliced, &up->fmt.sliced, - sizeof(kp->fmt.sliced)) ? -EFAULT : 0; + return copy_in_user(&kp->fmt.sliced, &up->fmt.sliced, + sizeof(kp->fmt.sliced)) ? -EFAULT : 0; default: return -EINVAL; } }

-static int get_v4l2_format32(struct v4l2_format *kp, struct v4l2_format32 __user *up) +static int get_v4l2_format32(struct v4l2_format __user *kp, + struct v4l2_format32 __user *up, + void __user *aux_buf, u32 aux_space) { if (!access_ok(VERIFY_READ, up, sizeof(*up))) return -EFAULT; - return __get_v4l2_format32(kp, up); + return __get_v4l2_format32(kp, up, aux_buf, aux_space); }

-static int get_v4l2_create32(struct v4l2_create_buffers *kp, struct v4l2_create_buffers32 __user *up) +static int bufsize_v4l2_create(struct v4l2_create_buffers32 __user *up, + u32 *size) +{ + if (!access_ok(VERIFY_READ, up, sizeof(*up))) + return -EFAULT; + return __bufsize_v4l2_format(&up->format, size); +} + +static int get_v4l2_create32(struct v4l2_create_buffers __user *kp, + struct v4l2_create_buffers32 __user *up, + void __user *aux_buf, u32 aux_space) { if (!access_ok(VERIFY_READ, up, sizeof(*up)) || - copy_from_user(kp, up, offsetof(struct v4l2_create_buffers32, format))) + copy_in_user(kp, up, + offsetof(struct v4l2_create_buffers32, format))) return -EFAULT; - return __get_v4l2_format32(&kp->format, &up->format); + return __get_v4l2_format32(&kp->format, &up->format, + aux_buf, aux_space); }

-static int __put_v4l2_format32(struct v4l2_format *kp, struct v4l2_format32 __user *up) +static int __put_v4l2_format32(struct v4l2_format __user *kp, + struct v4l2_format32 __user *up) { - switch (kp->type) { + u32 type; + + if (get_user(type, &kp->type)) + return -EFAULT; + + switch (type) { case V4L2_BUF_TYPE_VIDEO_CAPTURE: case V4L2_BUF_TYPE_VIDEO_OUTPUT: - return copy_to_user(&up->fmt.pix, &kp->fmt.pix, - sizeof(kp->fmt.pix)) ? -EFAULT : 0; + return copy_in_user(&up->fmt.pix, &kp->fmt.pix, + sizeof(kp->fmt.pix)) ? -EFAULT : 0; case V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE: case V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE: - return copy_to_user(&up->fmt.pix_mp, &kp->fmt.pix_mp, - sizeof(kp->fmt.pix_mp)) ? -EFAULT : 0; + return copy_in_user(&up->fmt.pix_mp, &kp->fmt.pix_mp, + sizeof(kp->fmt.pix_mp)) ? -EFAULT : 0; case V4L2_BUF_TYPE_VIDEO_OVERLAY: case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY: return put_v4l2_window32(&kp->fmt.win, &up->fmt.win); case V4L2_BUF_TYPE_VBI_CAPTURE: case V4L2_BUF_TYPE_VBI_OUTPUT: - return copy_to_user(&up->fmt.vbi, &kp->fmt.vbi, - sizeof(kp->fmt.vbi)) ? -EFAULT : 0; + return copy_in_user(&up->fmt.vbi, &kp->fmt.vbi, + sizeof(kp->fmt.vbi)) ? -EFAULT : 0; case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE: case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT: - return copy_to_user(&up->fmt.sliced, &kp->fmt.sliced, - sizeof(kp->fmt.sliced)) ? -EFAULT : 0; + return copy_in_user(&up->fmt.sliced, &kp->fmt.sliced, + sizeof(kp->fmt.sliced)) ? -EFAULT : 0; default: return -EINVAL; } }

-static int put_v4l2_format32(struct v4l2_format *kp, struct v4l2_format32 __user *up) +static int put_v4l2_format32(struct v4l2_format __user *kp, + struct v4l2_format32 __user *up) { if (!access_ok(VERIFY_WRITE, up, sizeof(*up))) return -EFAULT; return __put_v4l2_format32(kp, up); }

-static int put_v4l2_create32(struct v4l2_create_buffers *kp, struct v4l2_create_buffers32 __user *up) +static int put_v4l2_create32(struct v4l2_create_buffers __user *kp, + struct v4l2_create_buffers32 __user *up) { if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) || - copy_to_user(up, kp, offsetof(struct v4l2_create_buffers32, format)) || - copy_to_user(up->reserved, kp->reserved, sizeof(kp->reserved))) + copy_in_user(up, kp, + offsetof(struct v4l2_create_buffers32, format)) || + copy_in_user(up->reserved, kp->reserved, sizeof(kp->reserved))) return -EFAULT; return __put_v4l2_format32(&kp->format, &up->format); } @@ -241,24 +314,27 @@ struct v4l2_standard32 { __u32 reserved[4]; };

-static int get_v4l2_standard32(struct v4l2_standard *kp, struct v4l2_standard32 __user *up) +static int get_v4l2_standard32(struct v4l2_standard __user *kp, + struct v4l2_standard32 __user *up) { /* other fields are not set by the user, nor used by the driver */ if (!access_ok(VERIFY_READ, up, sizeof(*up)) || - get_user(kp->index, &up->index)) + assign_in_user(&kp->index, &up->index)) return -EFAULT; return 0; }

-static int put_v4l2_standard32(struct v4l2_standard *kp, struct v4l2_standard32 __user *up) +static int put_v4l2_standard32(struct v4l2_standard __user *kp, + struct v4l2_standard32 __user *up) { if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) || - put_user(kp->index, &up->index) || - copy_to_user(up->id, &kp->id, sizeof(__u64)) || - copy_to_user(up->name, kp->name, sizeof(up->name)) || - copy_to_user(&up->frameperiod, &kp->frameperiod, sizeof(kp->frameperiod)) || - put_user(kp->framelines, &up->framelines) || - copy_to_user(up->reserved, kp->reserved, sizeof(kp->reserved))) + assign_in_user(&up->index, &kp->index) || + copy_in_user(&up->id, &kp->id, sizeof(up->id)) || + copy_in_user(up->name, kp->name, sizeof(up->name)) || + copy_in_user(&up->frameperiod, &kp->frameperiod, + sizeof(up->frameperiod)) || + assign_in_user(&up->framelines, &kp->framelines) || + copy_in_user(up->reserved, kp->reserved, sizeof(up->reserved))) return -EFAULT; return 0; } @@ -298,11 +374,11 @@ struct v4l2_buffer32 { __u32 reserved; };

-static int get_v4l2_plane32(struct v4l2_plane __user *up, struct v4l2_plane32 __user *up32, +static int get_v4l2_plane32(struct v4l2_plane __user *up, + struct v4l2_plane32 __user *up32, enum v4l2_memory memory) { - void __user *up_pln; - compat_long_t p; + compat_ulong_t p;

if (copy_in_user(up, up32, 2 * sizeof(__u32)) || copy_in_user(&up->data_offset, &up32->data_offset, @@ -317,10 +393,8 @@ static int get_v4l2_plane32(struct v4l2_ return -EFAULT; break; case V4L2_MEMORY_USERPTR: - if (get_user(p, &up32->m.userptr)) - return -EFAULT; - up_pln = compat_ptr(p); - if (put_user((unsigned long)up_pln, &up->m.userptr)) + if (get_user(p, &up32->m.userptr) || + put_user((unsigned long)compat_ptr(p), &up->m.userptr)) return -EFAULT; break; case V4L2_MEMORY_DMABUF: @@ -332,7 +406,8 @@ static int get_v4l2_plane32(struct v4l2_ return 0; }

-static int put_v4l2_plane32(struct v4l2_plane __user *up, struct v4l2_plane32 __user *up32, +static int put_v4l2_plane32(struct v4l2_plane __user *up, + struct v4l2_plane32 __user *up32, enum v4l2_memory memory) { unsigned long p; @@ -356,8 +431,7 @@ static int put_v4l2_plane32(struct v4l2_ return -EFAULT; break; case V4L2_MEMORY_DMABUF: - if (copy_in_user(&up32->m.fd, &up->m.fd, - sizeof(up->m.fd))) + if (copy_in_user(&up32->m.fd, &up->m.fd, sizeof(up->m.fd))) return -EFAULT; break; } @@ -365,37 +439,75 @@ static int put_v4l2_plane32(struct v4l2_ return 0; }

-static int get_v4l2_buffer32(struct v4l2_buffer *kp, struct v4l2_buffer32 __user *up) +static int bufsize_v4l2_buffer(struct v4l2_buffer32 __user *up, u32 *size) { + u32 type; + u32 length; + + if (!access_ok(VERIFY_READ, up, sizeof(*up)) || + get_user(type, &up->type) || + get_user(length, &up->length)) + return -EFAULT; + + if (V4L2_TYPE_IS_MULTIPLANAR(type)) { + if (length > VIDEO_MAX_PLANES) + return -EINVAL; + + /* + * We don't really care if userspace decides to kill itself + * by passing a very big length value + */ + *size = length * sizeof(struct v4l2_plane); + } else { + *size = 0; + } + return 0; +} + +static int get_v4l2_buffer32(struct v4l2_buffer __user *kp, + struct v4l2_buffer32 __user *up, + void __user *aux_buf, u32 aux_space) +{ + u32 type; + u32 length; + enum v4l2_memory memory; struct v4l2_plane32 __user *uplane32; struct v4l2_plane __user *uplane; compat_caddr_t p; - int num_planes; int ret;

if (!access_ok(VERIFY_READ, up, sizeof(*up)) || - get_user(kp->index, &up->index) || - get_user(kp->type, &up->type) || - get_user(kp->flags, &up->flags) || - get_user(kp->memory, &up->memory) || - get_user(kp->length, &up->length)) - return -EFAULT; - - if (V4L2_TYPE_IS_OUTPUT(kp->type)) - if (get_user(kp->bytesused, &up->bytesused) || - get_user(kp->field, &up->field) || - get_user(kp->timestamp.tv_sec, &up->timestamp.tv_sec) || - get_user(kp->timestamp.tv_usec, &up->timestamp.tv_usec)) + assign_in_user(&kp->index, &up->index) || + get_user(type, &up->type) || + put_user(type, &kp->type) || + assign_in_user(&kp->flags, &up->flags) || + get_user(memory, &up->memory) || + put_user(memory, &kp->memory) || + get_user(length, &up->length) || + put_user(length, &kp->length)) + return -EFAULT; + + if (V4L2_TYPE_IS_OUTPUT(type)) + if (assign_in_user(&kp->bytesused, &up->bytesused) || + assign_in_user(&kp->field, &up->field) || + assign_in_user(&kp->timestamp.tv_sec, + &up->timestamp.tv_sec) || + assign_in_user(&kp->timestamp.tv_usec, + &up->timestamp.tv_usec)) return -EFAULT;

- if (V4L2_TYPE_IS_MULTIPLANAR(kp->type)) { - num_planes = kp->length; + if (V4L2_TYPE_IS_MULTIPLANAR(type)) { + u32 num_planes = length; + if (num_planes == 0) { - kp->m.planes = NULL; - /* num_planes == 0 is legal, e.g. when userspace doesn't - * need planes array on DQBUF*/ - return 0; + /* + * num_planes == 0 is legal, e.g. when userspace doesn't + * need planes array on DQBUF + */ + return put_user(NULL, &kp->m.planes); } + if (num_planes > VIDEO_MAX_PLANES) + return -EINVAL;

if (get_user(p, &up->m.planes)) return -EFAULT; @@ -405,37 +517,43 @@ static int get_v4l2_buffer32(struct v4l2 num_planes * sizeof(*uplane32))) return -EFAULT;

- /* We don't really care if userspace decides to kill itself - * by passing a very big num_planes value */ - uplane = compat_alloc_user_space(num_planes * sizeof(*uplane)); - kp->m.planes = (__force struct v4l2_plane *)uplane; + /* + * We don't really care if userspace decides to kill itself + * by passing a very big num_planes value + */ + if (aux_space < num_planes * sizeof(*uplane)) + return -EFAULT; + + uplane = aux_buf; + if (put_user((__force struct v4l2_plane *)uplane, + &kp->m.planes)) + return -EFAULT;

- while (--num_planes >= 0) { - ret = get_v4l2_plane32(uplane, uplane32, kp->memory); + while (num_planes--) { + ret = get_v4l2_plane32(uplane, uplane32, memory); if (ret) return ret; - ++uplane; - ++uplane32; + uplane++; + uplane32++; } } else { - switch (kp->memory) { + switch (memory) { case V4L2_MEMORY_MMAP: case V4L2_MEMORY_OVERLAY: - if (get_user(kp->m.offset, &up->m.offset)) + if (assign_in_user(&kp->m.offset, &up->m.offset)) return -EFAULT; break; - case V4L2_MEMORY_USERPTR: - { - compat_long_t tmp; + case V4L2_MEMORY_USERPTR: { + compat_ulong_t userptr;

- if (get_user(tmp, &up->m.userptr)) - return -EFAULT; - - kp->m.userptr = (unsigned long)compat_ptr(tmp); - } + if (get_user(userptr, &up->m.userptr) || + put_user((unsigned long)compat_ptr(userptr), + &kp->m.userptr)) + return -EFAULT; break; + } case V4L2_MEMORY_DMABUF: - if (get_user(kp->m.fd, &up->m.fd)) + if (assign_in_user(&kp->m.fd, &up->m.fd)) return -EFAULT; break; } @@ -444,62 +562,70 @@ static int get_v4l2_buffer32(struct v4l2 return 0; }

-static int put_v4l2_buffer32(struct v4l2_buffer *kp, struct v4l2_buffer32 __user *up) +static int put_v4l2_buffer32(struct v4l2_buffer __user *kp, + struct v4l2_buffer32 __user *up) { + u32 type; + u32 length; + enum v4l2_memory memory; struct v4l2_plane32 __user *uplane32; struct v4l2_plane __user *uplane; compat_caddr_t p; - int num_planes; int ret;

if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) || - put_user(kp->index, &up->index) || - put_user(kp->type, &up->type) || - put_user(kp->flags, &up->flags) || - put_user(kp->memory, &up->memory)) - return -EFAULT; - - if (put_user(kp->bytesused, &up->bytesused) || - put_user(kp->field, &up->field) || - put_user(kp->timestamp.tv_sec, &up->timestamp.tv_sec) || - put_user(kp->timestamp.tv_usec, &up->timestamp.tv_usec) || - copy_to_user(&up->timecode, &kp->timecode, sizeof(kp->timecode)) || - put_user(kp->sequence, &up->sequence) || - put_user(kp->reserved2, &up->reserved2) || - put_user(kp->reserved, &up->reserved) || - put_user(kp->length, &up->length)) + assign_in_user(&up->index, &kp->index) || + get_user(type, &kp->type) || + put_user(type, &up->type) || + assign_in_user(&up->flags, &kp->flags) || + get_user(memory, &kp->memory) || + put_user(memory, &up->memory)) + return -EFAULT; + + if (assign_in_user(&up->bytesused, &kp->bytesused) || + assign_in_user(&up->field, &kp->field) || + assign_in_user(&up->timestamp.tv_sec, &kp->timestamp.tv_sec) || + assign_in_user(&up->timestamp.tv_usec, &kp->timestamp.tv_usec) || + copy_in_user(&up->timecode, &kp->timecode, sizeof(kp->timecode)) || + assign_in_user(&up->sequence, &kp->sequence) || + assign_in_user(&up->reserved2, &kp->reserved2) || + assign_in_user(&up->reserved, &kp->reserved) || + get_user(length, &kp->length) || + put_user(length, &up->length)) return -EFAULT;

- if (V4L2_TYPE_IS_MULTIPLANAR(kp->type)) { - num_planes = kp->length; + if (V4L2_TYPE_IS_MULTIPLANAR(type)) { + u32 num_planes = length; + if (num_planes == 0) return 0;

- uplane = (__force struct v4l2_plane __user *)kp->m.planes; + if (get_user(uplane, ((__force struct v4l2_plane __user **)&kp->m.planes))) + return -EFAULT; if (get_user(p, &up->m.planes)) return -EFAULT; uplane32 = compat_ptr(p);

- while (--num_planes >= 0) { - ret = put_v4l2_plane32(uplane, uplane32, kp->memory); + while (num_planes--) { + ret = put_v4l2_plane32(uplane, uplane32, memory); if (ret) return ret; ++uplane; ++uplane32; } } else { - switch (kp->memory) { + switch (memory) { case V4L2_MEMORY_MMAP: case V4L2_MEMORY_OVERLAY: - if (put_user(kp->m.offset, &up->m.offset)) + if (assign_in_user(&up->m.offset, &kp->m.offset)) return -EFAULT; break; case V4L2_MEMORY_USERPTR: - if (put_user(kp->m.userptr, &up->m.userptr)) + if (assign_in_user(&up->m.userptr, &kp->m.userptr)) return -EFAULT; break; case V4L2_MEMORY_DMABUF: - if (put_user(kp->m.fd, &up->m.fd)) + if (assign_in_user(&up->m.fd, &kp->m.fd)) return -EFAULT; break; } @@ -511,7 +637,7 @@ static int put_v4l2_buffer32(struct v4l2 struct v4l2_framebuffer32 { __u32 capability; __u32 flags; - compat_caddr_t base; + compat_caddr_t base; struct { __u32 width; __u32 height; @@ -524,29 +650,32 @@ struct v4l2_framebuffer32 { } fmt; };

-static int get_v4l2_framebuffer32(struct v4l2_framebuffer *kp, struct v4l2_framebuffer32 __user *up) +static int get_v4l2_framebuffer32(struct v4l2_framebuffer __user *kp, + struct v4l2_framebuffer32 __user *up) { - u32 tmp; + compat_caddr_t tmp;

if (!access_ok(VERIFY_READ, up, sizeof(*up)) || get_user(tmp, &up->base) || - get_user(kp->capability, &up->capability) || - get_user(kp->flags, &up->flags) || - copy_from_user(&kp->fmt, &up->fmt, sizeof(up->fmt))) + put_user((__force void *)compat_ptr(tmp), &kp->base) || + assign_in_user(&kp->capability, &up->capability) || + assign_in_user(&kp->flags, &up->flags) || + copy_in_user(&kp->fmt, &up->fmt, sizeof(kp->fmt))) return -EFAULT; - kp->base = (__force void *)compat_ptr(tmp); return 0; }

-static int put_v4l2_framebuffer32(struct v4l2_framebuffer *kp, struct v4l2_framebuffer32 __user *up) +static int put_v4l2_framebuffer32(struct v4l2_framebuffer __user *kp, + struct v4l2_framebuffer32 __user *up) { - u32 tmp = (u32)((unsigned long)kp->base); + void *base;

if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) || - put_user(tmp, &up->base) || - put_user(kp->capability, &up->capability) || - put_user(kp->flags, &up->flags) || - copy_to_user(&up->fmt, &kp->fmt, sizeof(up->fmt))) + get_user(base, &kp->base) || + put_user(ptr_to_compat(base), &up->base) || + assign_in_user(&up->capability, &kp->capability) || + assign_in_user(&up->flags, &kp->flags) || + copy_in_user(&up->fmt, &kp->fmt, sizeof(kp->fmt))) return -EFAULT; return 0; } @@ -559,21 +688,26 @@ struct v4l2_input32 { __u32 tuner; /* Associated tuner */ v4l2_std_id std; __u32 status; - __u32 reserved[4]; -} __attribute__ ((packed)); + __u32 capabilities; + __u32 reserved[3]; +};

-/* The 64-bit v4l2_input struct has extra padding at the end of the struct. - Otherwise it is identical to the 32-bit version. */ -static inline int get_v4l2_input32(struct v4l2_input *kp, struct v4l2_input32 __user *up) +/* + * The 64-bit v4l2_input struct has extra padding at the end of the struct. + * Otherwise it is identical to the 32-bit version. + */ +static inline int get_v4l2_input32(struct v4l2_input __user *kp, + struct v4l2_input32 __user *up) { - if (copy_from_user(kp, up, sizeof(*up))) + if (copy_in_user(kp, up, sizeof(*up))) return -EFAULT; return 0; }

-static inline int put_v4l2_input32(struct v4l2_input *kp, struct v4l2_input32 __user *up) +static inline int put_v4l2_input32(struct v4l2_input __user *kp, + struct v4l2_input32 __user *up) { - if (copy_to_user(up, kp, sizeof(*up))) + if (copy_in_user(up, kp, sizeof(*up))) return -EFAULT; return 0; } @@ -627,40 +761,64 @@ static inline bool ctrl_is_pointer(struc (qec.flags & V4L2_CTRL_FLAG_HAS_PAYLOAD); }

+static int bufsize_v4l2_ext_controls(struct v4l2_ext_controls32 __user *up, + u32 *size) +{ + u32 count; + + if (!access_ok(VERIFY_READ, up, sizeof(*up)) || + get_user(count, &up->count)) + return -EFAULT; + if (count > V4L2_CID_MAX_CTRLS) + return -EINVAL; + *size = count * sizeof(struct v4l2_ext_control); + return 0; +} + static int get_v4l2_ext_controls32(struct file *file, - struct v4l2_ext_controls *kp, - struct v4l2_ext_controls32 __user *up) + struct v4l2_ext_controls __user *kp, + struct v4l2_ext_controls32 __user *up, + void __user *aux_buf, u32 aux_space) { struct v4l2_ext_control32 __user *ucontrols; struct v4l2_ext_control __user *kcontrols; - int n; + u32 count; + u32 n; compat_caddr_t p;

if (!access_ok(VERIFY_READ, up, sizeof(*up)) || - get_user(kp->ctrl_class, &up->ctrl_class) || - get_user(kp->count, &up->count) || - get_user(kp->error_idx, &up->error_idx) || - copy_from_user(kp->reserved, up->reserved, sizeof(kp->reserved))) - return -EFAULT; - n = kp->count; - if (n == 0) { - kp->controls = NULL; - return 0; - } + assign_in_user(&kp->ctrl_class, &up->ctrl_class) || + get_user(count, &up->count) || + put_user(count, &kp->count) || + assign_in_user(&kp->error_idx, &up->error_idx) || + copy_in_user(kp->reserved, up->reserved, sizeof(kp->reserved))) + return -EFAULT; + + if (count == 0) + return put_user(NULL, &kp->controls); + if (count > V4L2_CID_MAX_CTRLS) + return -EINVAL; if (get_user(p, &up->controls)) return -EFAULT; ucontrols = compat_ptr(p); - if (!access_ok(VERIFY_READ, ucontrols, n * sizeof(*ucontrols))) + if (!access_ok(VERIFY_READ, ucontrols, count * sizeof(*ucontrols))) + return -EFAULT; + if (aux_space < count * sizeof(*kcontrols)) return -EFAULT; - kcontrols = compat_alloc_user_space(n * sizeof(*kcontrols)); - kp->controls = (__force struct v4l2_ext_control *)kcontrols; - while (--n >= 0) { + kcontrols = aux_buf; + if (put_user((__force struct v4l2_ext_control *)kcontrols, + &kp->controls)) + return -EFAULT; + + for (n = 0; n < count; n++) { u32 id;

if (copy_in_user(kcontrols, ucontrols, sizeof(*ucontrols))) return -EFAULT; + if (get_user(id, &kcontrols->id)) return -EFAULT; + if (ctrl_is_pointer(file, id)) { void __user *s;

@@ -677,43 +835,54 @@ static int get_v4l2_ext_controls32(struc }

static int put_v4l2_ext_controls32(struct file *file, - struct v4l2_ext_controls *kp, + struct v4l2_ext_controls __user *kp, struct v4l2_ext_controls32 __user *up) { struct v4l2_ext_control32 __user *ucontrols; - struct v4l2_ext_control __user *kcontrols = - (__force struct v4l2_ext_control __user *)kp->controls; - int n = kp->count; + struct v4l2_ext_control __user *kcontrols; + u32 count; + u32 n; compat_caddr_t p;

if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) || - put_user(kp->ctrl_class, &up->ctrl_class) || - put_user(kp->count, &up->count) || - put_user(kp->error_idx, &up->error_idx) || - copy_to_user(up->reserved, kp->reserved, sizeof(up->reserved))) + assign_in_user(&up->ctrl_class, &kp->ctrl_class) || + get_user(count, &kp->count) || + put_user(count, &up->count) || + assign_in_user(&up->error_idx, &kp->error_idx) || + copy_in_user(up->reserved, kp->reserved, sizeof(up->reserved)) || + get_user(kcontrols, &kp->controls)) return -EFAULT; - if (!kp->count) - return 0;

+ if (!count) + return 0; if (get_user(p, &up->controls)) return -EFAULT; ucontrols = compat_ptr(p); - if (!access_ok(VERIFY_WRITE, ucontrols, n * sizeof(*ucontrols))) + if (!access_ok(VERIFY_WRITE, ucontrols, count * sizeof(*ucontrols))) return -EFAULT;

- while (--n >= 0) { - unsigned size = sizeof(*ucontrols); + for (n = 0; n < count; n++) { + unsigned int size = sizeof(*ucontrols); u32 id;

- if (get_user(id, &kcontrols->id)) + if (get_user(id, &kcontrols->id) || + put_user(id, &ucontrols->id) || + assign_in_user(&ucontrols->size, &kcontrols->size) || + copy_in_user(&ucontrols->reserved2, &kcontrols->reserved2, + sizeof(ucontrols->reserved2))) return -EFAULT; - /* Do not modify the pointer when copying a pointer control. - The contents of the pointer was changed, not the pointer - itself. */ + + /* + * Do not modify the pointer when copying a pointer control. + * The contents of the pointer was changed, not the pointer + * itself. + */ if (ctrl_is_pointer(file, id)) size -= sizeof(ucontrols->value64); + if (copy_in_user(ucontrols, kcontrols, size)) return -EFAULT; + ucontrols++; kcontrols++; } @@ -732,17 +901,18 @@ struct v4l2_event32 { __u32 reserved[8]; };

-static int put_v4l2_event32(struct v4l2_event *kp, struct v4l2_event32 __user *up) +static int put_v4l2_event32(struct v4l2_event __user *kp, + struct v4l2_event32 __user *up) { if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) || - put_user(kp->type, &up->type) || - copy_to_user(&up->u, &kp->u, sizeof(kp->u)) || - put_user(kp->pending, &up->pending) || - put_user(kp->sequence, &up->sequence) || - put_user(kp->timestamp.tv_sec, &up->timestamp.tv_sec) || - put_user(kp->timestamp.tv_nsec, &up->timestamp.tv_nsec) || - put_user(kp->id, &up->id) || - copy_to_user(up->reserved, kp->reserved, sizeof(kp->reserved))) + assign_in_user(&up->type, &kp->type) || + copy_in_user(&up->u, &kp->u, sizeof(kp->u)) || + assign_in_user(&up->pending, &kp->pending) || + assign_in_user(&up->sequence, &kp->sequence) || + assign_in_user(&up->timestamp.tv_sec, &kp->timestamp.tv_sec) || + assign_in_user(&up->timestamp.tv_nsec, &kp->timestamp.tv_nsec) || + assign_in_user(&up->id, &kp->id) || + copy_in_user(up->reserved, kp->reserved, sizeof(up->reserved))) return -EFAULT; return 0; } @@ -755,31 +925,34 @@ struct v4l2_edid32 { compat_caddr_t edid; };

-static int get_v4l2_edid32(struct v4l2_edid *kp, struct v4l2_edid32 __user *up) +static int get_v4l2_edid32(struct v4l2_edid __user *kp, + struct v4l2_edid32 __user *up) { - u32 tmp; + compat_uptr_t tmp;

if (!access_ok(VERIFY_READ, up, sizeof(*up)) || - get_user(kp->pad, &up->pad) || - get_user(kp->start_block, &up->start_block) || - get_user(kp->blocks, &up->blocks) || + assign_in_user(&kp->pad, &up->pad) || + assign_in_user(&kp->start_block, &up->start_block) || + assign_in_user(&kp->blocks, &up->blocks) || get_user(tmp, &up->edid) || - copy_from_user(kp->reserved, up->reserved, sizeof(kp->reserved))) + put_user(compat_ptr(tmp), &kp->edid) || + copy_in_user(kp->reserved, up->reserved, sizeof(kp->reserved))) return -EFAULT; - kp->edid = (__force u8 *)compat_ptr(tmp); return 0; }

-static int put_v4l2_edid32(struct v4l2_edid *kp, struct v4l2_edid32 __user *up) +static int put_v4l2_edid32(struct v4l2_edid __user *kp, + struct v4l2_edid32 __user *up) { - u32 tmp = (u32)((unsigned long)kp->edid); + void *edid;

if (!access_ok(VERIFY_WRITE, up, sizeof(*up)) || - put_user(kp->pad, &up->pad) || - put_user(kp->start_block, &up->start_block) || - put_user(kp->blocks, &up->blocks) || - put_user(tmp, &up->edid) || - copy_to_user(up->reserved, kp->reserved, sizeof(up->reserved))) + assign_in_user(&up->pad, &kp->pad) || + assign_in_user(&up->start_block, &kp->start_block) || + assign_in_user(&up->blocks, &kp->blocks) || + get_user(edid, &kp->edid) || + put_user(ptr_to_compat(edid), &up->edid) || + copy_in_user(up->reserved, kp->reserved, sizeof(up->reserved))) return -EFAULT; return 0; } @@ -796,7 +969,7 @@ static int put_v4l2_edid32(struct v4l2_e #define VIDIOC_ENUMINPUT32 _IOWR('V', 26, struct v4l2_input32) #define VIDIOC_G_EDID32 _IOWR('V', 40, struct v4l2_edid32) #define VIDIOC_S_EDID32 _IOWR('V', 41, struct v4l2_edid32) -#define VIDIOC_TRY_FMT32 _IOWR('V', 64, struct v4l2_format32) +#define VIDIOC_TRY_FMT32 _IOWR('V', 64, struct v4l2_format32) #define VIDIOC_G_EXT_CTRLS32 _IOWR('V', 71, struct v4l2_ext_controls32) #define VIDIOC_S_EXT_CTRLS32 _IOWR('V', 72, struct v4l2_ext_controls32) #define VIDIOC_TRY_EXT_CTRLS32 _IOWR('V', 73, struct v4l2_ext_controls32) @@ -812,22 +985,23 @@ static int put_v4l2_edid32(struct v4l2_e #define VIDIOC_G_OUTPUT32 _IOR ('V', 46, s32) #define VIDIOC_S_OUTPUT32 _IOWR('V', 47, s32)

+static int alloc_userspace(unsigned int size, u32 aux_space, + void __user **up_native) +{ + *up_native = compat_alloc_user_space(size + aux_space); + if (!*up_native) + return -ENOMEM; + if (clear_user(*up_native, size)) + return -EFAULT; + return 0; +} + static long do_video_ioctl(struct file *file, unsigned int cmd, unsigned long arg) { - union { - struct v4l2_format v2f; - struct v4l2_buffer v2b; - struct v4l2_framebuffer v2fb; - struct v4l2_input v2i; - struct v4l2_standard v2s; - struct v4l2_ext_controls v2ecs; - struct v4l2_event v2ev; - struct v4l2_create_buffers v2crt; - struct v4l2_edid v2edid; - unsigned long vx; - int vi; - } karg; void __user *up = compat_ptr(arg); + void __user *up_native = NULL; + void __user *aux_buf; + u32 aux_space; int compatible_arg = 1; long err = 0;

@@ -866,30 +1040,52 @@ static long do_video_ioctl(struct file * case VIDIOC_STREAMOFF: case VIDIOC_S_INPUT: case VIDIOC_S_OUTPUT: - err = get_user(karg.vi, (s32 __user *)up); + err = alloc_userspace(sizeof(unsigned int), 0, &up_native); + if (!err && assign_in_user((unsigned int __user *)up_native, + (compat_uint_t __user *)up)) + err = -EFAULT; compatible_arg = 0; break;

case VIDIOC_G_INPUT: case VIDIOC_G_OUTPUT: + err = alloc_userspace(sizeof(unsigned int), 0, &up_native); compatible_arg = 0; break;

case VIDIOC_G_EDID: case VIDIOC_S_EDID: - err = get_v4l2_edid32(&karg.v2edid, up); + err = alloc_userspace(sizeof(struct v4l2_edid), 0, &up_native); + if (!err) + err = get_v4l2_edid32(up_native, up); compatible_arg = 0; break;

case VIDIOC_G_FMT: case VIDIOC_S_FMT: case VIDIOC_TRY_FMT: - err = get_v4l2_format32(&karg.v2f, up); + err = bufsize_v4l2_format(up, &aux_space); + if (!err) + err = alloc_userspace(sizeof(struct v4l2_format), + aux_space, &up_native); + if (!err) { + aux_buf = up_native + sizeof(struct v4l2_format); + err = get_v4l2_format32(up_native, up, + aux_buf, aux_space); + } compatible_arg = 0; break;

case VIDIOC_CREATE_BUFS: - err = get_v4l2_create32(&karg.v2crt, up); + err = bufsize_v4l2_create(up, &aux_space); + if (!err) + err = alloc_userspace(sizeof(struct v4l2_create_buffers), + aux_space, &up_native); + if (!err) { + aux_buf = up_native + sizeof(struct v4l2_create_buffers); + err = get_v4l2_create32(up_native, up, + aux_buf, aux_space); + } compatible_arg = 0; break;

@@ -897,36 +1093,63 @@ static long do_video_ioctl(struct file * case VIDIOC_QUERYBUF: case VIDIOC_QBUF: case VIDIOC_DQBUF: - err = get_v4l2_buffer32(&karg.v2b, up); + err = bufsize_v4l2_buffer(up, &aux_space); + if (!err) + err = alloc_userspace(sizeof(struct v4l2_buffer), + aux_space, &up_native); + if (!err) { + aux_buf = up_native + sizeof(struct v4l2_buffer); + err = get_v4l2_buffer32(up_native, up, + aux_buf, aux_space); + } compatible_arg = 0; break;

case VIDIOC_S_FBUF: - err = get_v4l2_framebuffer32(&karg.v2fb, up); + err = alloc_userspace(sizeof(struct v4l2_framebuffer), 0, + &up_native); + if (!err) + err = get_v4l2_framebuffer32(up_native, up); compatible_arg = 0; break;

case VIDIOC_G_FBUF: + err = alloc_userspace(sizeof(struct v4l2_framebuffer), 0, + &up_native); compatible_arg = 0; break;

case VIDIOC_ENUMSTD: - err = get_v4l2_standard32(&karg.v2s, up); + err = alloc_userspace(sizeof(struct v4l2_standard), 0, + &up_native); + if (!err) + err = get_v4l2_standard32(up_native, up); compatible_arg = 0; break;

case VIDIOC_ENUMINPUT: - err = get_v4l2_input32(&karg.v2i, up); + err = alloc_userspace(sizeof(struct v4l2_input), 0, &up_native); + if (!err) + err = get_v4l2_input32(up_native, up); compatible_arg = 0; break;

case VIDIOC_G_EXT_CTRLS: case VIDIOC_S_EXT_CTRLS: case VIDIOC_TRY_EXT_CTRLS: - err = get_v4l2_ext_controls32(file, &karg.v2ecs, up); + err = bufsize_v4l2_ext_controls(up, &aux_space); + if (!err) + err = alloc_userspace(sizeof(struct v4l2_ext_controls), + aux_space, &up_native); + if (!err) { + aux_buf = up_native + sizeof(struct v4l2_ext_controls); + err = get_v4l2_ext_controls32(file, up_native, up, + aux_buf, aux_space); + } compatible_arg = 0; break; case VIDIOC_DQEVENT: + err = alloc_userspace(sizeof(struct v4l2_event), 0, &up_native); compatible_arg = 0; break; } @@ -935,25 +1158,26 @@ static long do_video_ioctl(struct file *

if (compatible_arg) err = native_ioctl(file, cmd, (unsigned long)up); - else { - mm_segment_t old_fs = get_fs(); - - set_fs(KERNEL_DS); - err = native_ioctl(file, cmd, (unsigned long)&karg); - set_fs(old_fs); - } + else + err = native_ioctl(file, cmd, (unsigned long)up_native);

if (err == -ENOTTY) return err;

- /* Special case: even after an error we need to put the - results back for these ioctls since the error_idx will - contain information on which control failed. */ + /* + * Special case: even after an error we need to put the + * results back for these ioctls since the error_idx will + * contain information on which control failed. + */ switch (cmd) { case VIDIOC_G_EXT_CTRLS: case VIDIOC_S_EXT_CTRLS: case VIDIOC_TRY_EXT_CTRLS: - if (put_v4l2_ext_controls32(file, &karg.v2ecs, up)) + if (put_v4l2_ext_controls32(file, up_native, up)) + err = -EFAULT; + break; + case VIDIOC_S_EDID: + if (put_v4l2_edid32(up_native, up)) err = -EFAULT; break; } @@ -965,45 +1189,46 @@ static long do_video_ioctl(struct file * case VIDIOC_S_OUTPUT: case VIDIOC_G_INPUT: case VIDIOC_G_OUTPUT: - err = put_user(((s32)karg.vi), (s32 __user *)up); + if (assign_in_user((compat_uint_t __user *)up, + ((unsigned int __user *)up_native))) + err = -EFAULT; break;

case VIDIOC_G_FBUF: - err = put_v4l2_framebuffer32(&karg.v2fb, up); + err = put_v4l2_framebuffer32(up_native, up); break;

case VIDIOC_DQEVENT: - err = put_v4l2_event32(&karg.v2ev, up); + err = put_v4l2_event32(up_native, up); break;

case VIDIOC_G_EDID: - case VIDIOC_S_EDID: - err = put_v4l2_edid32(&karg.v2edid, up); + err = put_v4l2_edid32(up_native, up); break;

case VIDIOC_G_FMT: case VIDIOC_S_FMT: case VIDIOC_TRY_FMT: - err = put_v4l2_format32(&karg.v2f, up); + err = put_v4l2_format32(up_native, up); break;

case VIDIOC_CREATE_BUFS: - err = put_v4l2_create32(&karg.v2crt, up); + err = put_v4l2_create32(up_native, up); break;

case VIDIOC_PREPARE_BUF: case VIDIOC_QUERYBUF: case VIDIOC_QBUF: case VIDIOC_DQBUF: - err = put_v4l2_buffer32(&karg.v2b, up); + err = put_v4l2_buffer32(up_native, up); break;

case VIDIOC_ENUMSTD: - err = put_v4l2_standard32(&karg.v2s, up); + err = put_v4l2_standard32(up_native, up); break;

case VIDIOC_ENUMINPUT: - err = put_v4l2_input32(&karg.v2i, up); + err = put_v4l2_input32(up_native, up); break; } return err;

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ricardo Ribalda ricardo.ribalda@gmail.com

Volatile controls should not generate CH_VALUE events.

Set has_changed to false to prevent this happening.

Signed-off-by: Ricardo Ribalda Delgado ricardo.ribalda@gmail.com Signed-off-by: Hans Verkuil hans.verkuil@cisco.com Signed-off-by: Mauro Carvalho Chehab mchehab@osg.samsung.com Signed-off-by: Mauro Carvalho Chehab mchehab@s-opensource.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/media/v4l2-core/v4l2-ctrls.c | 9 +++++++++ 1 file changed, 9 insertions(+)

--- a/drivers/media/v4l2-core/v4l2-ctrls.c +++ b/drivers/media/v4l2-core/v4l2-ctrls.c @@ -1619,6 +1619,15 @@ static int cluster_changed(struct v4l2_c

if (ctrl == NULL) continue; + /* + * Set has_changed to false to avoid generating + * the event V4L2_EVENT_CTRL_CH_VALUE + */ + if (ctrl->flags & V4L2_CTRL_FLAG_VOLATILE) { + ctrl->has_changed = false; + continue; + } + for (idx = 0; !ctrl_changed && idx < ctrl->elems; idx++) ctrl_changed = !ctrl->type_ops->equal(ctrl, idx, ctrl->p_cur, ctrl->p_new);

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Mauro Carvalho Chehab mchehab@s-opensource.com

The get_v4l2_create32() function is missing a logic with would be cleaning a reserved field, causing v4l2-compliance to complain:

Buffer ioctls (Input 0): fail: v4l2-test-buffers.cpp(506): check_0(crbufs.reserved, sizeof(crbufs.reserved)) test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: FAIL

Signed-off-by: Mauro Carvalho Chehab mchehab@s-opensource.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/media/v4l2-core/v4l2-compat-ioctl32.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c +++ b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c @@ -247,7 +247,8 @@ static int get_v4l2_create32(struct v4l2 { if (!access_ok(VERIFY_READ, up, sizeof(*up)) || copy_in_user(kp, up, - offsetof(struct v4l2_create_buffers32, format))) + offsetof(struct v4l2_create_buffers32, format)) || + copy_in_user(kp->reserved, up->reserved, sizeof(kp->reserved))) return -EFAULT; return __get_v4l2_format32(&kp->format, &up->format, aux_buf, aux_space);

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Clemens Werther clemens.werther@gmail.com

commit 6555ad13a01952c16485c82a52ad1f3e07e34b3a upstream.

Add device id for Harman FirmwareHubEmulator to make the device auto-detectable by the driver.

Signed-off-by: Clemens Werther clemens.werther@gmail.com Cc: stable stable@vger.kernel.org Signed-off-by: Johan Hovold johan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/usb/serial/ftdi_sio.c | 1 + drivers/usb/serial/ftdi_sio_ids.h | 6 ++++++ 2 files changed, 7 insertions(+)

--- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -936,6 +936,7 @@ static const struct usb_device_id id_tab { USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_LS_LOGBOOK_PID) }, { USB_DEVICE(FTDI_VID, FTDI_SCIENCESCOPE_HS_LOGBOOK_PID) }, { USB_DEVICE(FTDI_VID, FTDI_CINTERION_MC55I_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_FHE_PID) }, { USB_DEVICE(FTDI_VID, FTDI_DOTEC_PID) }, { USB_DEVICE(QIHARDWARE_VID, MILKYMISTONE_JTAGSERIAL_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -1425,6 +1425,12 @@ #define FTDI_CINTERION_MC55I_PID 0xA951

/* + * Product: FirmwareHubEmulator + * Manufacturer: Harman Becker Automotive Systems + */ +#define FTDI_FHE_PID 0xA9A0 + +/* * Product: Comet Caller ID decoder * Manufacturer: Crucible Technologies */

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Colin Ian King colin.king@canonical.com

commit bb0829a741792b56c908d7745bc0b2b540293bcc upstream.

Currently the driver spams the kernel log on unsupported ioctls which is unnecessary as the ioctl returns -ENOIOCTLCMD to indicate this anyway. I suspect this was originally for debugging purposes but it really is not required so remove it.

Signed-off-by: Colin Ian King colin.king@canonical.com Cc: stable stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/misc/mei/main.c | 1 - 1 file changed, 1 deletion(-)

--- a/drivers/misc/mei/main.c +++ b/drivers/misc/mei/main.c @@ -556,7 +556,6 @@ static long mei_ioctl(struct file *file, break;

default: - dev_err(dev->dev, ": unsupported ioctl %d.\n", cmd); rets = -ENOIOCTLCMD; }

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Alexander Gerasiov gq@redlab-i.ru

commit 823f7923833c6cc2b16e601546d607dcfb368004 upstream.

WCH CH382L is a PCI-E adapter with 1 parallel port. It is similair to CH382 but serial ports are not soldered on board. Detected as Serial controller: Device 1c00:3050 (rev 10) (prog-if 05 [16850])

Signed-off-by: Alexander Gerasiov gq@redlab-i.ru Cc: stable stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/parport/parport_pc.c | 4 ++++ 1 file changed, 4 insertions(+)

--- a/drivers/parport/parport_pc.c +++ b/drivers/parport/parport_pc.c @@ -2646,6 +2646,7 @@ enum parport_pc_pci_cards { netmos_9901, netmos_9865, quatech_sppxp100, + wch_ch382l, };

@@ -2708,6 +2709,7 @@ static struct parport_pc_pci { /* netmos_9901 */ { 1, { { 0, -1 }, } }, /* netmos_9865 */ { 1, { { 0, -1 }, } }, /* quatech_sppxp100 */ { 1, { { 0, 1 }, } }, + /* wch_ch382l */ { 1, { { 2, -1 }, } }, };

static const struct pci_device_id parport_pc_pci_tbl[] = { @@ -2797,6 +2799,8 @@ static const struct pci_device_id parpor /* Quatech SPPXP-100 Parallel port PCI ExpressCard */ { PCI_VENDOR_ID_QUATECH, PCI_DEVICE_ID_QUATECH_SPPXP_100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, quatech_sppxp100 }, + /* WCH CH382L PCI-E single parallel port card */ + { 0x1c00, 0x3050, 0x1c00, 0x3050, 0, 0, wch_ch382l }, { 0, } /* terminate list */ }; MODULE_DEVICE_TABLE(pci, parport_pc_pci_tbl);

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Eric Biggers ebiggers@google.com

commit 8f461b1e02ed546fbd0f11611138da67fd85a30f upstream.

With ecb-cast5-avx, if a 128+ byte scatterlist element followed a shorter one, then the algorithm accidentally encrypted/decrypted only 8 bytes instead of the expected 128 bytes. Fix it by setting the encryption/decryption 'fn' correctly.

Fixes: c12ab20b162c ("crypto: cast5/avx - avoid using temporary stack buffers") Cc: stable@vger.kernel.org # v3.8+ Signed-off-by: Eric Biggers ebiggers@google.com Signed-off-by: Herbert Xu herbert@gondor.apana.org.au Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/x86/crypto/cast5_avx_glue.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/arch/x86/crypto/cast5_avx_glue.c +++ b/arch/x86/crypto/cast5_avx_glue.c @@ -67,8 +67,6 @@ static int ecb_crypt(struct blkcipher_de void (*fn)(struct cast5_ctx *ctx, u8 *dst, const u8 *src); int err;

- fn = (enc) ? cast5_ecb_enc_16way : cast5_ecb_dec_16way; - err = blkcipher_walk_virt(desc, walk); desc->flags &= ~CRYPTO_TFM_REQ_MAY_SLEEP;

@@ -80,6 +78,7 @@ static int ecb_crypt(struct blkcipher_de

/* Process multi-block batch */ if (nbytes >= bsize * CAST5_PARALLEL_BLOCKS) { + fn = (enc) ? cast5_ecb_enc_16way : cast5_ecb_dec_16way; do { fn(ctx, wdst, wsrc);

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Andy Lutomirski luto@kernel.org

commit b18cb64ead400c01bf1580eeba330ace51f8087d upstream.

This reverts more of:

b76437579d13 ("procfs: mark thread stack correctly in proc/<pid>/maps")

... which was partially reverted by:

65376df58217 ("proc: revert /proc/<pid>/maps [stack:TID] annotation")

Originally, /proc/PID/task/TID/maps was the same as /proc/TID/maps.

In current kernels, /proc/PID/maps (or /proc/TID/maps even for threads) shows "[stack]" for VMAs in the mm's stack address range.

In contrast, /proc/PID/task/TID/maps uses KSTK_ESP to guess the target thread's stack's VMA. This is racy, probably returns garbage and, on arches with CONFIG_TASK_INFO_IN_THREAD=y, is also crash-prone: KSTK_ESP is not safe to use on tasks that aren't known to be running ordinary process-context kernel code.

This patch removes the difference and just shows "[stack]" for VMAs in the mm's stack range. This is IMO much more sensible -- the actual "stack" address really is treated specially by the VM code, and the current thread stack isn't even well-defined for programs that frequently switch stacks on their own.

Reported-by: Jann Horn jann@thejh.net Signed-off-by: Andy Lutomirski luto@kernel.org Acked-by: Thomas Gleixner tglx@linutronix.de Cc: Al Viro viro@zeniv.linux.org.uk Cc: Andrew Morton akpm@linux-foundation.org Cc: Borislav Petkov bp@alien8.de Cc: Brian Gerst brgerst@gmail.com Cc: Johannes Weiner hannes@cmpxchg.org Cc: Kees Cook keescook@chromium.org Cc: Linus Torvalds torvalds@linux-foundation.org Cc: Linux API linux-api@vger.kernel.org Cc: Peter Zijlstra peterz@infradead.org Cc: Tycho Andersen tycho.andersen@canonical.com Link: http://lkml.kernel.org/r/3e678474ec14e0a0ec34c611016753eea2e1b8ba.1475257877... Signed-off-by: Ingo Molnar mingo@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- Documentation/filesystems/proc.txt | 26 -------------------------- fs/proc/task_mmu.c | 29 ++++++++++------------------- fs/proc/task_nommu.c | 26 +++++++++----------------- 3 files changed, 19 insertions(+), 62 deletions(-)

--- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -371,32 +371,6 @@ is not associated with a file:

or if empty, the mapping is anonymous.

-The /proc/PID/task/TID/maps is a view of the virtual memory from the viewpoint -of the individual tasks of a process. In this file you will see a mapping marked -as [stack] if that task sees it as a stack. Hence, for the example above, the -task-level map, i.e. /proc/PID/task/TID/maps for thread 1001 will look like this: - -08048000-08049000 r-xp 00000000 03:00 8312 /opt/test -08049000-0804a000 rw-p 00001000 03:00 8312 /opt/test -0804a000-0806b000 rw-p 00000000 00:00 0 [heap] -a7cb1000-a7cb2000 ---p 00000000 00:00 0 -a7cb2000-a7eb2000 rw-p 00000000 00:00 0 -a7eb2000-a7eb3000 ---p 00000000 00:00 0 -a7eb3000-a7ed5000 rw-p 00000000 00:00 0 [stack] -a7ed5000-a8008000 r-xp 00000000 03:00 4222 /lib/libc.so.6 -a8008000-a800a000 r--p 00133000 03:00 4222 /lib/libc.so.6 -a800a000-a800b000 rw-p 00135000 03:00 4222 /lib/libc.so.6 -a800b000-a800e000 rw-p 00000000 00:00 0 -a800e000-a8022000 r-xp 00000000 03:00 14462 /lib/libpthread.so.0 -a8022000-a8023000 r--p 00013000 03:00 14462 /lib/libpthread.so.0 -a8023000-a8024000 rw-p 00014000 03:00 14462 /lib/libpthread.so.0 -a8024000-a8027000 rw-p 00000000 00:00 0 -a8027000-a8043000 r-xp 00000000 03:00 8317 /lib/ld-linux.so.2 -a8043000-a8044000 r--p 0001b000 03:00 8317 /lib/ld-linux.so.2 -a8044000-a8045000 rw-p 0001c000 03:00 8317 /lib/ld-linux.so.2 -aff35000-aff4a000 rw-p 00000000 00:00 0 -ffffe000-fffff000 r-xp 00000000 00:00 0 [vdso] - The /proc/PID/smaps is an extension based on maps, showing the memory consumption for each of the process's mappings. For each of mappings there is a series of lines such as the following: --- a/fs/proc/task_mmu.c +++ b/fs/proc/task_mmu.c @@ -248,24 +248,15 @@ static int do_maps_open(struct inode *in * /proc/PID/maps that is the stack of the main task. */ static int is_stack(struct proc_maps_private *priv, - struct vm_area_struct *vma, int is_pid) + struct vm_area_struct *vma) { - int stack = 0; - - if (is_pid) { - stack = vma->vm_start <= vma->vm_mm->start_stack && - vma->vm_end >= vma->vm_mm->start_stack; - } else { - struct inode *inode = priv->inode; - struct task_struct *task; - - rcu_read_lock(); - task = pid_task(proc_pid(inode), PIDTYPE_PID); - if (task) - stack = vma_is_stack_for_task(vma, task); - rcu_read_unlock(); - } - return stack; + /* + * We make no effort to guess what a given thread considers to be + * its "stack". It's not even well-defined for programs written + * languages like Go. + */ + return vma->vm_start <= vma->vm_mm->start_stack && + vma->vm_end >= vma->vm_mm->start_stack; }

static void @@ -332,7 +323,7 @@ show_map_vma(struct seq_file *m, struct goto done; }

- if (is_stack(priv, vma, is_pid)) + if (is_stack(priv, vma)) name = "[stack]"; }

@@ -1501,7 +1492,7 @@ static int show_numa_map(struct seq_file seq_path(m, &file->f_path, "\n\t= "); } else if (vma->vm_start <= mm->brk && vma->vm_end >= mm->start_brk) { seq_puts(m, " heap"); - } else if (is_stack(proc_priv, vma, is_pid)) { + } else if (is_stack(proc_priv, vma)) { seq_puts(m, " stack"); }

--- a/fs/proc/task_nommu.c +++ b/fs/proc/task_nommu.c @@ -124,25 +124,17 @@ unsigned long task_statm(struct mm_struc }

static int is_stack(struct proc_maps_private *priv, - struct vm_area_struct *vma, int is_pid) + struct vm_area_struct *vma) { struct mm_struct *mm = vma->vm_mm; - int stack = 0;

- if (is_pid) { - stack = vma->vm_start <= mm->start_stack && - vma->vm_end >= mm->start_stack; - } else { - struct inode *inode = priv->inode; - struct task_struct *task; - - rcu_read_lock(); - task = pid_task(proc_pid(inode), PIDTYPE_PID); - if (task) - stack = vma_is_stack_for_task(vma, task); - rcu_read_unlock(); - } - return stack; + /* + * We make no effort to guess what a given thread considers to be + * its "stack". It's not even well-defined for programs written + * languages like Go. + */ + return vma->vm_start <= mm->start_stack && + vma->vm_end >= mm->start_stack; }

/* @@ -184,7 +176,7 @@ static int nommu_vma_show(struct seq_fil if (file) { seq_pad(m, ' '); seq_path(m, &file->f_path, ""); - } else if (mm && is_stack(priv, vma, is_pid)) { + } else if (mm && is_stack(priv, vma)) { seq_pad(m, ' '); seq_printf(m, "[stack]"); }

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Ondrej Zary linux@rainbow-software.org

commit 04bb1719c4de94700056241d4c0fe3c1413f5aff upstream.

The touch sensor buttons on Sony VAIO VGN-CS series laptops (e.g. VGN-CS31S) are a separate PS/2 device. As the MUX is disabled for all VAIO machines by the nomux blacklist, the data from touch sensor buttons and touchpad are combined. The protocol used by the buttons is probably similar to the touchpad protocol (both are Synaptics) so both devices get enabled. The controller combines the data, creating a mess which results in random button clicks, touchpad stopping working and lost sync error messages: psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 4 psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1 psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1 psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1 psmouse serio1: TouchPad at isa0060/serio1/input0 lost sync at byte 1 psmouse serio1: issuing reconnect request

Add a new i8042_dmi_forcemux_table whitelist with VGN-CS. With MUX enabled, touch sensor buttons are detected as separate device (and left disabled as there's currently no driver), fixing all touchpad problems.

Signed-off-by: Ondrej Zary linux@rainbow-software.org Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/input/serio/i8042-x86ia64io.h | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)

--- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -712,6 +712,20 @@ static const struct dmi_system_id __init { } };

+static const struct dmi_system_id i8042_dmi_forcemux_table[] __initconst = { + { + /* + * Sony Vaio VGN-CS series require MUX or the touch sensor + * buttons will disturb touchpad operation + */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), + DMI_MATCH(DMI_PRODUCT_NAME, "VGN-CS"), + }, + }, + { } +}; + /* * Some Wistron based laptops need us to explicitly enable the 'Dritek * keyboard extension' to make their extra keys start generating scancodes. @@ -1124,6 +1138,9 @@ static int __init i8042_platform_init(vo if (dmi_check_system(i8042_dmi_nomux_table)) i8042_nomux = true;

+ if (dmi_check_system(i8042_dmi_forcemux_table)) + i8042_nomux = false; + if (dmi_check_system(i8042_dmi_notimeout_table)) i8042_notimeout = true;

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Keerthy j-keerthy@ti.com

commit 0ea66f76ba17a4b229caaadd77de694111b21769 upstream.

GPIO7 is configured in POWERHOLD mode which has higher priority over DEV_ON bit and keeps the PMIC supplies on even after the DEV_ON bit is turned off. This property enables driver to over ride the POWERHOLD value to GPIO7 so as to turn off the PMIC in power off scenarios.

Signed-off-by: Keerthy j-keerthy@ti.com Acked-by: Rob Herring robh@kernel.org Signed-off-by: Linus Walleij linus.walleij@linaro.org Cc: Ben Hutchings ben.hutchings@codethink.co.uk Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- Documentation/devicetree/bindings/pinctrl/pinctrl-palmas.txt | 9 +++++++++ 1 file changed, 9 insertions(+)

--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-palmas.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-palmas.txt @@ -35,6 +35,15 @@ Optional properties: - ti,palmas-enable-dvfs2: Enable DVFS2. Configure pins for DVFS2 mode. Selection primary or secondary function associated to GPADC_START and SYSEN2 pin/pad for DVFS2 interface +- ti,palmas-override-powerhold: This is applicable for PMICs for which + GPIO7 is configured in POWERHOLD mode which has higher priority + over DEV_ON bit and keeps the PMIC supplies on even after the DEV_ON + bit is turned off. This property enables driver to over ride the + POWERHOLD value to GPIO7 so as to turn off the PMIC in power off + scenarios. So for GPIO7 if ti,palmas-override-powerhold is set + then the GPIO_7 field should never be muxed to anything else. + It should be set to POWERHOLD by default and only in case of + power off scenarios the driver will over ride the mux value.

This binding uses the following generic properties as defined in pinctrl-bindings.txt:

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Guoqing Jiang gqjiang@suse.com

commit 6f287ca6046edd34ed83aafb7f9033c9c2e809e2 upstream.

We need to set "first = 0' at the end of rdev_for_each loop, so we can get the array's min_offset_diff correctly otherwise min_offset_diff just means the last rdev's offset diff.

[only the first chunk, due to b506335e5d2b ("md/raid10: skip spare disk as 'first' disk") being already applied - gregkh]

Suggested-by: NeilBrown neilb@suse.com Signed-off-by: Guoqing Jiang gqjiang@suse.com Reviewed-by: NeilBrown neilb@suse.com Signed-off-by: Shaohua Li shli@fb.com Cc: Ben Hutchings ben.hutchings@codethink.co.uk Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/md/raid10.c | 1 + 1 file changed, 1 insertion(+)

--- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -3717,6 +3717,7 @@ static int run(struct mddev *mddev)

if (blk_queue_discard(bdev_get_queue(rdev->bdev))) discard_supported = true; + first = 0; }

if (mddev->queue) {

3.18-stable review patch. If anyone has any objections, please let me know.

------------------

From: Greg Kroah-Hartman gregkh@linuxfoundation.org

This reverts commit 9d8df5594467b6c73c3833b462abe5811fe7295b which was commit 7be4b5dc7ffa9499ac6ef33a5ffa9ff43f9b7057 upstream.

It requires a driver that was not merged until 4.16, so remove it from this stable tree as it is pointless.

Reported-by: Ben Hutchings ben.hutchings@codethink.co.uk Cc: Andrew F. Davis afd@ti.com Cc: Tony Lindgren tony@atomide.com Cc: Sasha Levin alexander.levin@microsoft.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/arm/boot/dts/omap3-n900.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/arm/boot/dts/omap3-n900.dts +++ b/arch/arm/boot/dts/omap3-n900.dts @@ -435,7 +435,7 @@ tlv320aic3x: tlv320aic3x@18 { compatible = "ti,tlv320aic3x"; reg = <0x18>; - reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; /* 60 */ + gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */ ai3x-gpio-func = < 0 /* AIC3X_GPIO1_FUNC_DISABLED */ 5 /* AIC3X_GPIO2_FUNC_DIGITAL_MIC_INPUT */ @@ -452,7 +452,7 @@ tlv320aic3x_aux: tlv320aic3x@19 { compatible = "ti,tlv320aic3x"; reg = <0x19>; - reset-gpios = <&gpio2 28 GPIO_ACTIVE_LOW>; /* 60 */ + gpio-reset = <&gpio2 28 GPIO_ACTIVE_HIGH>; /* 60 */

AVDD-supply = <&vmmc2>; DRVDD-supply = <&vmmc2>;