Le 13/11/2018 17:38, Neil Armstrong a écrit :

Hi Stable team,

Le 06/11/2018 00:08, Jerome Brunet a écrit :

...

From: Christian Hewitt christianshewitt@gmail.com

On the Khadas VIM2 (GXM) and LePotato (GXL) board there are problems with reboot; e.g. a ~60 second delay between issuing reboot and the board power cycling (and in some OS configurations reboot will fail and require manual power cycling).

Similar to 'commit c987ac6f1f088663b6dad39281071aeb31d450a8 ("clk: meson-gxbb: set fclk_div2 as CLK_IS_CRITICAL")' the SCPI Cortex-M4 Co-Processor seems to depend on FCLK_DIV3 being operational.

Until commit 05f814402d6174369b3b29832cbb5eb5ed287059 ("clk: meson: add fdiv clock gates"), this clock was modeled and left on by the bootloader.

We don't have precise documentation about the SCPI Co-Processor and its clock requirement so we are learning things the hard way.

Marking this clock as critical solves the problem but it should not be viewed as final solution. Ideally, the SCPI driver should claim these clocks. We also depends on some clock hand-off mechanism making its way to CCF, to make sure the clock stays on between its registration and the SCPI driver probe.

Fixes: 05f814402d61 ("clk: meson: add fdiv clock gates") Signed-off-by: Christian Hewitt christianshewitt@gmail.com Signed-off-by: Jerome Brunet jbrunet@baylibre.com

Could this patch go into the next 4.18 stable release since it hit linus master with commit id e2576c8bdfd462c34b8a46c0084e7c30b0851bf4 ?

I forgot, but it should also go into the next 4.19 stable release aswell.

Neil

Thanks, Neil

...

---

drivers/clk/meson/gxbb.c | 12 ++++++++++++ 1 file changed, 12 insertions(+)

diff --git a/drivers/clk/meson/gxbb.c b/drivers/clk/meson/gxbb.c index 9309cfaaa464..4ada9668fd49 100644 --- a/drivers/clk/meson/gxbb.c +++ b/drivers/clk/meson/gxbb.c @@ -506,6 +506,18 @@ static struct clk_regmap gxbb_fclk_div3 = { .ops = &clk_regmap_gate_ops, .parent_names = (const char *[]){ "fclk_div3_div" }, .num_parents = 1,

• /*
  

•  * FIXME:
  

•  * This clock, as fdiv2, is used by the SCPI FW and is required
  

•  * by the platform to operate correctly.
  

•  * Until the following condition are met, we need this clock to
  

•  * be marked as critical:
  

•  * a) The SCPI generic driver claims and enable all the clocks
  

•  *    it needs
  

•  * b) CCF has a clock hand-off mechanism to make the sure the
  

•  *    clock stays on until the proper driver comes along
  

•  */
  

• .flags = CLK_IS_CRITICAL,
  

  },

};