FAILED: patch "[PATCH] mmc: core: Allow host controllers to require R1B for CMD6" failed to apply to 5.5-stable tree
The patch below does not apply to the 5.5-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to stable@vger.kernel.org.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 1292e3efb149ee21d8d33d725eeed4e6b1ade963 Mon Sep 17 00:00:00 2001
From: Ulf Hansson ulf.hansson@linaro.org Date: Tue, 10 Mar 2020 12:49:43 +0100 Subject: [PATCH] mmc: core: Allow host controllers to require R1B for CMD6
It has turned out that some host controllers can't use R1B for CMD6 and other commands that have R1B associated with them. Therefore invent a new host cap, MMC_CAP_NEED_RSP_BUSY to let them specify this.
In __mmc_switch(), let's check the flag and use it to prevent R1B responses from being converted into R1. Note that, this also means that the host are on its own, when it comes to manage the busy timeout.
Suggested-by: Sowjanya Komatineni skomatineni@nvidia.com Cc: stable@vger.kernel.org Tested-by: Anders Roxell anders.roxell@linaro.org Tested-by: Sowjanya Komatineni skomatineni@nvidia.com Tested-by: Faiz Abbas faiz_abbas@ti.com Tested-By: Peter Geis pgwipeout@gmail.com Signed-off-by: Ulf Hansson ulf.hansson@linaro.org
diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c index da425ee2d9bf..e025604e17d4 100644 --- a/drivers/mmc/core/mmc_ops.c +++ b/drivers/mmc/core/mmc_ops.c @@ -542,9 +542,11 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value, * If the max_busy_timeout of the host is specified, make sure it's * enough to fit the used timeout_ms. In case it's not, let's instruct * the host to avoid HW busy detection, by converting to a R1 response - * instead of a R1B. + * instead of a R1B. Note, some hosts requires R1B, which also means + * they are on their own when it comes to deal with the busy timeout. */ - if (host->max_busy_timeout && (timeout_ms > host->max_busy_timeout)) + if (!(host->caps & MMC_CAP_NEED_RSP_BUSY) && host->max_busy_timeout && + (timeout_ms > host->max_busy_timeout)) use_r1b_resp = false;
cmd.opcode = MMC_SWITCH; diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h index ba703384bea0..4c5eb3aa8e72 100644 --- a/include/linux/mmc/host.h +++ b/include/linux/mmc/host.h @@ -333,6 +333,7 @@ struct mmc_host { MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR104 | \ MMC_CAP_UHS_DDR50) #define MMC_CAP_SYNC_RUNTIME_PM (1 << 21) /* Synced runtime PM suspends. */ +#define MMC_CAP_NEED_RSP_BUSY (1 << 22) /* Commands with R1B can't use R1. */ #define MMC_CAP_DRIVER_TYPE_A (1 << 23) /* Host supports Driver Type A */ #define MMC_CAP_DRIVER_TYPE_C (1 << 24) /* Host supports Driver Type C */ #define MMC_CAP_DRIVER_TYPE_D (1 << 25) /* Host supports Driver Type D */
On Mon, Mar 16, 2020 at 12:31:18PM +0100, gregkh@linuxfoundation.org wrote:
The patch below does not apply to the 5.5-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to stable@vger.kernel.org.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 1292e3efb149ee21d8d33d725eeed4e6b1ade963 Mon Sep 17 00:00:00 2001 From: Ulf Hansson ulf.hansson@linaro.org Date: Tue, 10 Mar 2020 12:49:43 +0100 Subject: [PATCH] mmc: core: Allow host controllers to require R1B for CMD6
It has turned out that some host controllers can't use R1B for CMD6 and other commands that have R1B associated with them. Therefore invent a new host cap, MMC_CAP_NEED_RSP_BUSY to let them specify this.
In __mmc_switch(), let's check the flag and use it to prevent R1B responses from being converted into R1. Note that, this also means that the host are on its own, when it comes to manage the busy timeout.
Suggested-by: Sowjanya Komatineni skomatineni@nvidia.com Cc: stable@vger.kernel.org Tested-by: Anders Roxell anders.roxell@linaro.org Tested-by: Sowjanya Komatineni skomatineni@nvidia.com Tested-by: Faiz Abbas faiz_abbas@ti.com Tested-By: Peter Geis pgwipeout@gmail.com Signed-off-by: Ulf Hansson ulf.hansson@linaro.org
I've fixed up and queued this whole mmc series of stable tagged patches for 4.19-5.5.
+ Naresh
On Wed, 18 Mar 2020 at 20:25, Sasha Levin sashal@kernel.org wrote:
On Mon, Mar 16, 2020 at 12:31:18PM +0100, gregkh@linuxfoundation.org wrote:
The patch below does not apply to the 5.5-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to stable@vger.kernel.org.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 1292e3efb149ee21d8d33d725eeed4e6b1ade963 Mon Sep 17 00:00:00 2001 From: Ulf Hansson ulf.hansson@linaro.org Date: Tue, 10 Mar 2020 12:49:43 +0100 Subject: [PATCH] mmc: core: Allow host controllers to require R1B for CMD6
It has turned out that some host controllers can't use R1B for CMD6 and other commands that have R1B associated with them. Therefore invent a new host cap, MMC_CAP_NEED_RSP_BUSY to let them specify this.
In __mmc_switch(), let's check the flag and use it to prevent R1B responses from being converted into R1. Note that, this also means that the host are on its own, when it comes to manage the busy timeout.
Suggested-by: Sowjanya Komatineni skomatineni@nvidia.com Cc: stable@vger.kernel.org Tested-by: Anders Roxell anders.roxell@linaro.org Tested-by: Sowjanya Komatineni skomatineni@nvidia.com Tested-by: Faiz Abbas faiz_abbas@ti.com Tested-By: Peter Geis pgwipeout@gmail.com Signed-off-by: Ulf Hansson ulf.hansson@linaro.org
I've fixed up and queued this whole mmc series of stable tagged patches for 4.19-5.5.
I looked at stable-rc tree and realized that you have also picked the following patch:
commit 533a6cfe08f96a7b5c65e06d20916d552c11b256 Author: Ulf Hansson ulf.hansson@linaro.org Date: Wed Jan 22 15:27:47 2020 +0100 mmc: core: Default to generic_cmd6_time as timeout in __mmc_switch()
I assume this one was needed to apply the others mmc patches on top. This is a problem, because the above patch should not go for stable as it causes problems (unless additional patches are backported as well).
I suggest to drop the whole slew of mmc patches for the current stable rcs. Then I can send manual backports instead, is that okay?
Kind regards Uffe
On Fri, Mar 20, 2020 at 10:12:15AM +0100, Ulf Hansson wrote:
- Naresh
On Wed, 18 Mar 2020 at 20:25, Sasha Levin sashal@kernel.org wrote:
On Mon, Mar 16, 2020 at 12:31:18PM +0100, gregkh@linuxfoundation.org wrote:
The patch below does not apply to the 5.5-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to stable@vger.kernel.org.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 1292e3efb149ee21d8d33d725eeed4e6b1ade963 Mon Sep 17 00:00:00 2001 From: Ulf Hansson ulf.hansson@linaro.org Date: Tue, 10 Mar 2020 12:49:43 +0100 Subject: [PATCH] mmc: core: Allow host controllers to require R1B for CMD6
It has turned out that some host controllers can't use R1B for CMD6 and other commands that have R1B associated with them. Therefore invent a new host cap, MMC_CAP_NEED_RSP_BUSY to let them specify this.
In __mmc_switch(), let's check the flag and use it to prevent R1B responses from being converted into R1. Note that, this also means that the host are on its own, when it comes to manage the busy timeout.
Suggested-by: Sowjanya Komatineni skomatineni@nvidia.com Cc: stable@vger.kernel.org Tested-by: Anders Roxell anders.roxell@linaro.org Tested-by: Sowjanya Komatineni skomatineni@nvidia.com Tested-by: Faiz Abbas faiz_abbas@ti.com Tested-By: Peter Geis pgwipeout@gmail.com Signed-off-by: Ulf Hansson ulf.hansson@linaro.org
I've fixed up and queued this whole mmc series of stable tagged patches for 4.19-5.5.
I looked at stable-rc tree and realized that you have also picked the following patch:
commit 533a6cfe08f96a7b5c65e06d20916d552c11b256 Author: Ulf Hansson ulf.hansson@linaro.org Date: Wed Jan 22 15:27:47 2020 +0100 mmc: core: Default to generic_cmd6_time as timeout in __mmc_switch()
I assume this one was needed to apply the others mmc patches on top. This is a problem, because the above patch should not go for stable as it causes problems (unless additional patches are backported as well).
I suggest to drop the whole slew of mmc patches for the current stable rcs. Then I can send manual backports instead, is that okay?
Yes, I have now done that, having a properly backported set of patches would be great, thanks!
greg k-h
linux-stable-mirror@lists.linaro.org
-
Greg Kroah-Hartman -
gregkh＠linuxfoundation.org
-
Sasha Levin -
Ulf Hansson