From: Navid Emamdoost navid.emamdoost@gmail.com

[ Upstream commit 861254d826499944cb4d9b5a15f5a794a6b99a69 ]

Calling pm_runtime_get_sync increments the counter even in case of failure, causing incorrect ref count if pm_runtime_put is not called in error handling paths. Call pm_runtime_put if pm_runtime_get_sync fails.

Signed-off-by: Navid Emamdoost navid.emamdoost@gmail.com Acked-by: Charles Keepax ckeepax@opensource.cirrus.com Link: https://lore.kernel.org/r/20200605030052.78235-1-navid.emamdoost@gmail.com Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpio/gpio-arizona.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/gpio/gpio-arizona.c b/drivers/gpio/gpio-arizona.c index e09834b91ea52..694674dfbf82a 100644 --- a/drivers/gpio/gpio-arizona.c +++ b/drivers/gpio/gpio-arizona.c @@ -69,6 +69,7 @@ static int arizona_gpio_get(struct gpio_chip *chip, unsigned offset) ret = pm_runtime_get_sync(chip->parent); if (ret < 0) { dev_err(chip->parent, "Failed to resume: %d\n", ret); + pm_runtime_put_autosuspend(chip->parent); return ret; }

@@ -77,12 +78,15 @@ static int arizona_gpio_get(struct gpio_chip *chip, unsigned offset) if (ret < 0) { dev_err(chip->parent, "Failed to drop cache: %d\n", ret); + pm_runtime_put_autosuspend(chip->parent); return ret; }

ret = regmap_read(arizona->regmap, reg, &val); - if (ret < 0) + if (ret < 0) { + pm_runtime_put_autosuspend(chip->parent); return ret; + }

pm_runtime_mark_last_busy(chip->parent); pm_runtime_put_autosuspend(chip->parent);

From: Markus Theil markus.theil@tu-ilmenau.de

[ Upstream commit 0b467b63870d9c05c81456aa9bfee894ab2db3b6 ]

Without this patch, eapol frames cannot be received in mesh mode, when 802.1X should be used. Initially only a MGTK is defined, which is found and set as rx->key, when there are no other keys set. ieee80211_drop_unencrypted would then drop these eapol frames, as they are data frames without encryption and there exists some rx->key.

Fix this by differentiating between mesh eapol frames and other data frames with existing rx->key. Allow mesh mesh eapol frames only if they are for our vif address.

With this patch in-place, ieee80211_rx_h_mesh_fwding continues after the ieee80211_drop_unencrypted check and notices, that these eapol frames have to be delivered locally, as they should.

Signed-off-by: Markus Theil markus.theil@tu-ilmenau.de Link: https://lore.kernel.org/r/20200625104214.50319-1-markus.theil@tu-ilmenau.de [small code cleanups] Signed-off-by: Johannes Berg johannes.berg@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/mac80211/rx.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+)

diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 56d7a3dfa543b..04ae9de55d74b 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -2120,6 +2120,7 @@ static int ieee80211_802_1x_port_control(struct ieee80211_rx_data *rx)

static int ieee80211_drop_unencrypted(struct ieee80211_rx_data *rx, __le16 fc) { + struct ieee80211_hdr *hdr = (void *)rx->skb->data; struct sk_buff *skb = rx->skb; struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb);

@@ -2130,6 +2131,31 @@ static int ieee80211_drop_unencrypted(struct ieee80211_rx_data *rx, __le16 fc) if (status->flag & RX_FLAG_DECRYPTED) return 0;

+ /* check mesh EAPOL frames first */ + if (unlikely(rx->sta && ieee80211_vif_is_mesh(&rx->sdata->vif) && + ieee80211_is_data(fc))) { + struct ieee80211s_hdr *mesh_hdr; + u16 hdr_len = ieee80211_hdrlen(fc); + u16 ethertype_offset; + __be16 ethertype; + + if (!ether_addr_equal(hdr->addr1, rx->sdata->vif.addr)) + goto drop_check; + + /* make sure fixed part of mesh header is there, also checks skb len */ + if (!pskb_may_pull(rx->skb, hdr_len + 6)) + goto drop_check; + + mesh_hdr = (struct ieee80211s_hdr *)(skb->data + hdr_len); + ethertype_offset = hdr_len + ieee80211_get_mesh_hdrlen(mesh_hdr) + + sizeof(rfc1042_header); + + if (skb_copy_bits(rx->skb, ethertype_offset, &ethertype, 2) == 0 && + ethertype == rx->sdata->control_port_protocol) + return 0; + } + +drop_check: /* Drop unencrypted frames if key is set. */ if (unlikely(!ieee80211_has_protected(fc) && !ieee80211_is_any_nullfunc(fc) &&

From: Max Filippov jcmvbkbc@gmail.com

[ Upstream commit 73f9941306d5ce030f3ffc7db425c7b2a798cf8e ]

Building xtensa kernel with gcc-10 produces the following warnings: arch/xtensa/kernel/xtensa_ksyms.c:90:15: warning: conflicting types for built-in function ‘__sync_fetch_and_and_4’; expected ‘unsigned int(volatile void *, unsigned int)’ [-Wbuiltin-declaration-mismatch] arch/xtensa/kernel/xtensa_ksyms.c:96:15: warning: conflicting types for built-in function ‘__sync_fetch_and_or_4’; expected ‘unsigned int(volatile void *, unsigned int)’ [-Wbuiltin-declaration-mismatch]

Fix declarations of these functions to avoid the warning.

Signed-off-by: Max Filippov jcmvbkbc@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/xtensa/kernel/xtensa_ksyms.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/xtensa/kernel/xtensa_ksyms.c b/arch/xtensa/kernel/xtensa_ksyms.c index dc7b470a423a6..58b79e2ea569c 100644 --- a/arch/xtensa/kernel/xtensa_ksyms.c +++ b/arch/xtensa/kernel/xtensa_ksyms.c @@ -82,13 +82,13 @@ void __xtensa_libgcc_window_spill(void) } EXPORT_SYMBOL(__xtensa_libgcc_window_spill);

-unsigned long __sync_fetch_and_and_4(unsigned long *p, unsigned long v) +unsigned int __sync_fetch_and_and_4(volatile void *p, unsigned int v) { BUG(); } EXPORT_SYMBOL(__sync_fetch_and_and_4);

-unsigned long __sync_fetch_and_or_4(unsigned long *p, unsigned long v) +unsigned int __sync_fetch_and_or_4(volatile void *p, unsigned int v) { BUG(); }

From: Xie He xie.he.0141@gmail.com

[ Upstream commit 9dc829a135fb5927f1519de11286e2bbb79f5b66 ]

When this driver transmits data, first this driver will remove a pseudo header of 1 byte, then the lapb module will prepend the LAPB header of 2 or 3 bytes, then this driver will prepend a length field of 2 bytes, then the underlying Ethernet device will prepend its own header.

So, the header length required should be: -1 + 3 + 2 + "the header length needed by the underlying device".

This patch fixes kernel panic when this driver is used with AF_PACKET SOCK_DGRAM sockets.

Signed-off-by: Xie He xie.he.0141@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wan/lapbether.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wan/lapbether.c b/drivers/net/wan/lapbether.c index 0e3f8ed84660e..ac34257e9f203 100644 --- a/drivers/net/wan/lapbether.c +++ b/drivers/net/wan/lapbether.c @@ -308,7 +308,6 @@ static void lapbeth_setup(struct net_device *dev) dev->netdev_ops = &lapbeth_netdev_ops; dev->needs_free_netdev = true; dev->type = ARPHRD_X25; - dev->hard_header_len = 3; dev->mtu = 1000; dev->addr_len = 0; } @@ -329,6 +328,14 @@ static int lapbeth_new_device(struct net_device *dev) if (!ndev) goto out;

+ /* When transmitting data: + * first this driver removes a pseudo header of 1 byte, + * then the lapb module prepends an LAPB header of at most 3 bytes, + * then this driver prepends a length field of 2 bytes, + * then the underlying Ethernet device prepends its own header. + */ + ndev->hard_header_len = -1 + 3 + 2 + dev->hard_header_len; + lapbeth = netdev_priv(ndev); lapbeth->axdev = ndev;

From: AceLan Kao acelan.kao@canonical.com

[ Upstream commit f815dd5cf48b905eeecf0a2b990e9b7ab048b4f1 ]

Add support for Quectel Wireless Solutions Co., Ltd. EG95 LTE modem

T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0195 Rev=03.18 S: Manufacturer=Android S: Product=Android C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)

Signed-off-by: AceLan Kao acelan.kao@canonical.com Acked-by: Bjørn Mork bjorn@mork.no Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/usb/qmi_wwan.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 32ce50f119076..88b8ba0ad2cda 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -1294,6 +1294,7 @@ static const struct usb_device_id products[] = { {QMI_QUIRK_SET_DTR(0x1e0e, 0x9001, 5)}, /* SIMCom 7100E, 7230E, 7600E ++ */ {QMI_QUIRK_SET_DTR(0x2c7c, 0x0121, 4)}, /* Quectel EC21 Mini PCIe */ {QMI_QUIRK_SET_DTR(0x2c7c, 0x0191, 4)}, /* Quectel EG91 */ + {QMI_QUIRK_SET_DTR(0x2c7c, 0x0195, 4)}, /* Quectel EG95 */ {QMI_FIXED_INTF(0x2c7c, 0x0296, 4)}, /* Quectel BG96 */ {QMI_QUIRK_SET_DTR(0x2cb7, 0x0104, 4)}, /* Fibocom NL678 series */ {QMI_FIXED_INTF(0x0489, 0xe0b4, 0)}, /* Foxconn T77W968 LTE */

From: Ben Skeggs bskeggs@redhat.com

[ Upstream commit 0156e76d388310a490aeb0f2fbb5b284ded3aecc ]

Tegra TRM says worst-case reply time is 1216us, and this should fix some spurious timeouts that have been popping up.

Signed-off-by: Ben Skeggs bskeggs@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxg94.c | 4 ++-- drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxgm200.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxg94.c b/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxg94.c index c8ab1b5741a3e..db7769cb33eba 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxg94.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxg94.c @@ -118,10 +118,10 @@ g94_i2c_aux_xfer(struct nvkm_i2c_aux *obj, bool retry, if (retries) udelay(400);

- /* transaction request, wait up to 1ms for it to complete */ + /* transaction request, wait up to 2ms for it to complete */ nvkm_wr32(device, 0x00e4e4 + base, 0x00010000 | ctrl);

- timeout = 1000; + timeout = 2000; do { ctrl = nvkm_rd32(device, 0x00e4e4 + base); udelay(1); diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxgm200.c b/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxgm200.c index 7ef60895f43a7..edb6148cbca04 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxgm200.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/i2c/auxgm200.c @@ -118,10 +118,10 @@ gm200_i2c_aux_xfer(struct nvkm_i2c_aux *obj, bool retry, if (retries) udelay(400);

- /* transaction request, wait up to 1ms for it to complete */ + /* transaction request, wait up to 2ms for it to complete */ nvkm_wr32(device, 0x00d954 + base, 0x00010000 | ctrl);

- timeout = 1000; + timeout = 2000; do { ctrl = nvkm_rd32(device, 0x00d954 + base); udelay(1);