TCPM checks for sink caps operational current even when PD is disabled. This incorrectly sets tcpm_set_charge() when PD is disabled. Check for sink caps only when PD is enabled.
[ 97.572342] Start toggling [ 97.578949] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected] [ 99.571648] CC1: 0 -> 0, CC2: 0 -> 4 [state TOGGLING, polarity 0, connected] [ 99.571658] state change TOGGLING -> SNK_ATTACH_WAIT [rev3 NONE_AMS] [ 99.571673] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev3 NONE_AMS] [ 99.741778] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms] [ 99.789283] CC1: 0 -> 0, CC2: 4 -> 5 [state SNK_DEBOUNCED, polarity 0, connected] [ 99.789306] state change SNK_DEBOUNCED -> SNK_DEBOUNCED [rev3 NONE_AMS] [ 99.903584] VBUS on [ 99.903591] state change SNK_DEBOUNCED -> SNK_ATTACHED [rev3 NONE_AMS] [ 99.903600] polarity 1 [ 99.910155] enable vbus discharge ret:0 [ 99.910160] Requesting mux state 1, usb-role 2, orientation 2 [ 99.946791] state change SNK_ATTACHED -> SNK_STARTUP [rev3 NONE_AMS] [ 99.946798] state change SNK_STARTUP -> SNK_DISCOVERY [rev3 NONE_AMS] [ 99.946800] Setting voltage/current limit 5000 mV 500 mA [ 99.946803] vbus=0 charge:=1 [ 100.027139] state change SNK_DISCOVERY -> SNK_READY [rev3 NONE_AMS] [ 100.027145] Setting voltage/current limit 5000 mV 3000 mA [ 100.466830] VBUS on
Cc: stable@vger.kernel.org Fixes: 803b1c8a0cea ("usb: typec: tcpm: not sink vbus if operational current is 0mA") Signed-off-by: Badhri Jagan Sridharan badhri@google.com --- Changes since v2: * Fix the "Fixes" tag * Refactor code based on Guenter Roeck's suggestion.
Changes since v1: * Fix commit title and description to address comments from Guenter Roeck --- drivers/usb/typec/tcpm/tcpm.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index 058d5b853b57..afc791ab6d4f 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -4273,7 +4273,8 @@ static void run_state_machine(struct tcpm_port *port) current_lim = PD_P_SNK_STDBY_MW / 5; tcpm_set_current_limit(port, current_lim, 5000); /* Not sink vbus if operational current is 0mA */ - tcpm_set_charge(port, !!pdo_max_current(port->snk_pdo[0])); + tcpm_set_charge(port, !port->pd_supported || + pdo_max_current(port->snk_pdo[0]));
if (!port->pd_supported) tcpm_set_state(port, SNK_READY, 0);
base-commit: c70793fb7632a153862ee9060e6d48131469a29c
On 10/31/23 18:28, Badhri Jagan Sridharan wrote:
TCPM checks for sink caps operational current even when PD is disabled. This incorrectly sets tcpm_set_charge() when PD is disabled. Check for sink caps only when PD is enabled.
[ 97.572342] Start toggling [ 97.578949] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected] [ 99.571648] CC1: 0 -> 0, CC2: 0 -> 4 [state TOGGLING, polarity 0, connected] [ 99.571658] state change TOGGLING -> SNK_ATTACH_WAIT [rev3 NONE_AMS] [ 99.571673] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev3 NONE_AMS] [ 99.741778] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms] [ 99.789283] CC1: 0 -> 0, CC2: 4 -> 5 [state SNK_DEBOUNCED, polarity 0, connected] [ 99.789306] state change SNK_DEBOUNCED -> SNK_DEBOUNCED [rev3 NONE_AMS] [ 99.903584] VBUS on [ 99.903591] state change SNK_DEBOUNCED -> SNK_ATTACHED [rev3 NONE_AMS] [ 99.903600] polarity 1 [ 99.910155] enable vbus discharge ret:0 [ 99.910160] Requesting mux state 1, usb-role 2, orientation 2 [ 99.946791] state change SNK_ATTACHED -> SNK_STARTUP [rev3 NONE_AMS] [ 99.946798] state change SNK_STARTUP -> SNK_DISCOVERY [rev3 NONE_AMS] [ 99.946800] Setting voltage/current limit 5000 mV 500 mA [ 99.946803] vbus=0 charge:=1 [ 100.027139] state change SNK_DISCOVERY -> SNK_READY [rev3 NONE_AMS] [ 100.027145] Setting voltage/current limit 5000 mV 3000 mA [ 100.466830] VBUS on
Cc: stable@vger.kernel.org Fixes: 803b1c8a0cea ("usb: typec: tcpm: not sink vbus if operational current is 0mA") Signed-off-by: Badhri Jagan Sridharan badhri@google.com
Reviewed-by: Guenter Roeck linux@roeck-us.net
Changes since v2:
- Fix the "Fixes" tag
- Refactor code based on Guenter Roeck's suggestion.
Changes since v1:
- Fix commit title and description to address comments from Guenter Roeck
drivers/usb/typec/tcpm/tcpm.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index 058d5b853b57..afc791ab6d4f 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -4273,7 +4273,8 @@ static void run_state_machine(struct tcpm_port *port) current_lim = PD_P_SNK_STDBY_MW / 5; tcpm_set_current_limit(port, current_lim, 5000); /* Not sink vbus if operational current is 0mA */
tcpm_set_charge(port, !!pdo_max_current(port->snk_pdo[0]));
tcpm_set_charge(port, !port->pd_supported ||pdo_max_current(port->snk_pdo[0]));if (!port->pd_supported) tcpm_set_state(port, SNK_READY, 0);
base-commit: c70793fb7632a153862ee9060e6d48131469a29c
On 10/31/2023, Guenter Roeck wrote:
On 10/31/23 18:28, Badhri Jagan Sridharan wrote:
TCPM checks for sink caps operational current even when PD is disabled. This incorrectly sets tcpm_set_charge() when PD is disabled. Check for sink caps only when PD is enabled.
[ 97.572342] Start toggling [ 97.578949] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected] [ 99.571648] CC1: 0 -> 0, CC2: 0 -> 4 [state TOGGLING, polarity 0, connected] [ 99.571658] state change TOGGLING -> SNK_ATTACH_WAIT [rev3 NONE_AMS] [ 99.571673] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev3 NONE_AMS] [ 99.741778] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms] [ 99.789283] CC1: 0 -> 0, CC2: 4 -> 5 [state SNK_DEBOUNCED, polarity 0, connected] [ 99.789306] state change SNK_DEBOUNCED -> SNK_DEBOUNCED [rev3 NONE_AMS] [ 99.903584] VBUS on [ 99.903591] state change SNK_DEBOUNCED -> SNK_ATTACHED [rev3 NONE_AMS] [ 99.903600] polarity 1 [ 99.910155] enable vbus discharge ret:0 [ 99.910160] Requesting mux state 1, usb-role 2, orientation 2 [ 99.946791] state change SNK_ATTACHED -> SNK_STARTUP [rev3 NONE_AMS] [ 99.946798] state change SNK_STARTUP -> SNK_DISCOVERY [rev3 NONE_AMS] [ 99.946800] Setting voltage/current limit 5000 mV 500 mA [ 99.946803] vbus=0 charge:=1 [ 100.027139] state change SNK_DISCOVERY -> SNK_READY [rev3 NONE_AMS] [ 100.027145] Setting voltage/current limit 5000 mV 3000 mA [ 100.466830] VBUS on
Cc: stable@vger.kernel.org Fixes: 803b1c8a0cea ("usb: typec: tcpm: not sink vbus if operational current is 0mA") Signed-off-by: Badhri Jagan Sridharan badhri@google.com
Reviewed-by: Guenter Roeck linux@roeck-us.net
Thanks for catching this Badhri! I verified this fixes the charging issues seen on Pixel 6 and 7 with the mainline and v6.1 kernel. Feel free to add
Tested-by: Will McVicker willmcvicker@google.com
Thanks, Will
Changes since v2:
- Fix the "Fixes" tag
- Refactor code based on Guenter Roeck's suggestion.
Changes since v1:
- Fix commit title and description to address comments from Guenter Roeck
drivers/usb/typec/tcpm/tcpm.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index 058d5b853b57..afc791ab6d4f 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -4273,7 +4273,8 @@ static void run_state_machine(struct tcpm_port *port) current_lim = PD_P_SNK_STDBY_MW / 5; tcpm_set_current_limit(port, current_lim, 5000); /* Not sink vbus if operational current is 0mA */
tcpm_set_charge(port, !!pdo_max_current(port->snk_pdo[0]));
tcpm_set_charge(port, !port->pd_supported ||pdo_max_current(port->snk_pdo[0])); if (!port->pd_supported) tcpm_set_state(port, SNK_READY, 0);base-commit: c70793fb7632a153862ee9060e6d48131469a29c
On Wed, Nov 01, 2023 at 01:28:45AM +0000, Badhri Jagan Sridharan wrote:
TCPM checks for sink caps operational current even when PD is disabled. This incorrectly sets tcpm_set_charge() when PD is disabled. Check for sink caps only when PD is enabled.
[ 97.572342] Start toggling [ 97.578949] CC1: 0 -> 0, CC2: 0 -> 0 [state TOGGLING, polarity 0, disconnected] [ 99.571648] CC1: 0 -> 0, CC2: 0 -> 4 [state TOGGLING, polarity 0, connected] [ 99.571658] state change TOGGLING -> SNK_ATTACH_WAIT [rev3 NONE_AMS] [ 99.571673] pending state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED @ 170 ms [rev3 NONE_AMS] [ 99.741778] state change SNK_ATTACH_WAIT -> SNK_DEBOUNCED [delayed 170 ms] [ 99.789283] CC1: 0 -> 0, CC2: 4 -> 5 [state SNK_DEBOUNCED, polarity 0, connected] [ 99.789306] state change SNK_DEBOUNCED -> SNK_DEBOUNCED [rev3 NONE_AMS] [ 99.903584] VBUS on [ 99.903591] state change SNK_DEBOUNCED -> SNK_ATTACHED [rev3 NONE_AMS] [ 99.903600] polarity 1 [ 99.910155] enable vbus discharge ret:0 [ 99.910160] Requesting mux state 1, usb-role 2, orientation 2 [ 99.946791] state change SNK_ATTACHED -> SNK_STARTUP [rev3 NONE_AMS] [ 99.946798] state change SNK_STARTUP -> SNK_DISCOVERY [rev3 NONE_AMS] [ 99.946800] Setting voltage/current limit 5000 mV 500 mA [ 99.946803] vbus=0 charge:=1 [ 100.027139] state change SNK_DISCOVERY -> SNK_READY [rev3 NONE_AMS] [ 100.027145] Setting voltage/current limit 5000 mV 3000 mA [ 100.466830] VBUS on
Cc: stable@vger.kernel.org Fixes: 803b1c8a0cea ("usb: typec: tcpm: not sink vbus if operational current is 0mA") Signed-off-by: Badhri Jagan Sridharan badhri@google.com
Acked-by: Heikki Krogerus heikki.krogerus@linux.intel.com
Changes since v2:
- Fix the "Fixes" tag
- Refactor code based on Guenter Roeck's suggestion.
Changes since v1:
- Fix commit title and description to address comments from Guenter Roeck
drivers/usb/typec/tcpm/tcpm.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c index 058d5b853b57..afc791ab6d4f 100644 --- a/drivers/usb/typec/tcpm/tcpm.c +++ b/drivers/usb/typec/tcpm/tcpm.c @@ -4273,7 +4273,8 @@ static void run_state_machine(struct tcpm_port *port) current_lim = PD_P_SNK_STDBY_MW / 5; tcpm_set_current_limit(port, current_lim, 5000); /* Not sink vbus if operational current is 0mA */
tcpm_set_charge(port, !!pdo_max_current(port->snk_pdo[0]));
tcpm_set_charge(port, !port->pd_supported ||pdo_max_current(port->snk_pdo[0]));if (!port->pd_supported) tcpm_set_state(port, SNK_READY, 0);
base-commit: c70793fb7632a153862ee9060e6d48131469a29c
2.42.0.820.g83a721a137-goog
linux-stable-mirror@lists.linaro.org
-
Badhri Jagan Sridharan -
Guenter Roeck -
Heikki Krogerus -
William McVicker