This is the start of the stable review cycle for the 5.10.184 release. There are 68 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 14 Jun 2023 10:16:41 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.184-rc... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y and the diffstat can be found below.
thanks,
greg k-h
------------- Pseudo-Shortlog of commits:
Greg Kroah-Hartman gregkh@linuxfoundation.org Linux 5.10.184-rc1
Greg Kroah-Hartman gregkh@linuxfoundation.org Revert "staging: rtl8192e: Replace macro RTL_PCI_DEVICE with PCI_DEVICE"
Zixuan Fu r33s3n6@gmail.com btrfs: unset reloc control if transaction commit fails in prepare_to_relocate()
Josef Bacik josef@toxicpanda.com btrfs: check return value of btrfs_commit_transaction in relocation
Ville Syrjälä ville.syrjala@linux.intel.com drm/atomic: Don't pollute crtc_state->mode_blob with error pointers
Rui Wang wangrui@loongson.cn MIPS: locking/atomic: Fix atomic{_64,}_sub_if_positive
Darrick J. Wong djwong@kernel.org xfs: verify buffer contents when we skip log replay
Eric Dumazet edumazet@google.com tcp: fix tcp_min_tso_segs sysctl
Theodore Ts'o tytso@mit.edu ext4: only check dquot_initialize_needed() when debugging
Theodore Ts'o tytso@mit.edu Revert "ext4: don't clear SB_RDONLY when remounting r/w until quota is re-enabled"
Shannon Nelson shannon.nelson@amd.com vhost: support PACKED when setting-getting vring_base
Ruan Jinjie ruanjinjie@huawei.com riscv: fix kprobe __user string arg print fault issue
Randy Dunlap rdunlap@infradead.org eeprom: at24: also select REGMAP
Uwe Kleine-König u.kleine-koenig@pengutronix.de i2c: sprd: Delete i2c adapter in .remove's error path
Srinivas Kandagatla srinivas.kandagatla@linaro.org ASoC: codecs: wsa881x: do not set can_multi_write flag
Greg Kroah-Hartman gregkh@linuxfoundation.org staging: vc04_services: fix gcc-13 build warning
Ruihan Li lrh2000@pku.edu.cn usb: usbfs: Use consistent mmap functions
Ruihan Li lrh2000@pku.edu.cn usb: usbfs: Enforce page requirements for mmap
Martin Hundebøll martin@geanix.com pinctrl: meson-axg: add missing GPIOA_18 gpio group
Ilya Dryomov idryomov@gmail.com rbd: get snapshot context after exclusive lock is ensured to be held
Ilya Dryomov idryomov@gmail.com rbd: move RBD_OBJ_FLAG_COPYUP_ENABLED flag setting
Rijo Thomas Rijo-john.Thomas@amd.com tee: amdtee: Add return_origin to 'struct tee_cmd_load_ta'
Johan Hovold johan+linaro@kernel.org Bluetooth: hci_qca: fix debugfs registration
Luiz Augusto von Dentz luiz.von.dentz@intel.com Bluetooth: Fix use-after-free in hci_remove_ltk/hci_remove_irk
Jan Höppner hoeppner@linux.ibm.com s390/dasd: Use correct lock while counting channel queue length
Xiubo Li xiubli@redhat.com ceph: fix use-after-free bug for inodes when flushing capsnaps
Fedor Pchelkin pchelkin@ispras.ru can: j1939: avoid possible use-after-free when j1939_can_rx_register fails
Fedor Pchelkin pchelkin@ispras.ru can: j1939: change j1939_netdev_lock type to mutex
Oleksij Rempel linux@rempel-privat.de can: j1939: j1939_sk_send_loop_abort(): improved error queue handling in J1939 Socket
Chia-I Wu olvaffe@gmail.com drm/amdgpu: fix xclk freq on CHIP_STONEY
RenHai kean0048@gmail.com ALSA: hda/realtek: Add Lenovo P3 Tower platform
Ai Chao aichao@kylinos.cn ALSA: hda/realtek: Add a quirk for HP Slim Desktop S01
Dmitry Torokhov dmitry.torokhov@gmail.com Input: psmouse - fix OOB access in Elantech protocol
Ismael Ferreras Morezuelas swyterzone@gmail.com Input: xpad - delete a Razer DeathAdder mouse VID/PID entry
Vladislav Efanov VEfanov@ispras.ru batman-adv: Broken sync while rescheduling delayed work
Somnath Kotur somnath.kotur@broadcom.com bnxt_en: Implement .set_port / .unset_port UDP tunnel callbacks
Somnath Kotur somnath.kotur@broadcom.com bnxt_en: Query default VLAN before VNIC setup on a VF
Sreekanth Reddy sreekanth.reddy@broadcom.com bnxt_en: Don't issue AP reset during ethtool's reset operation
Ben Hutchings ben@decadent.org.uk lib: cpu_rmap: Fix potential use-after-free in irq_cpu_rmap_release()
Jiri Olsa jolsa@kernel.org bpf: Add extra path pointer check to d_path helper
Hangyu Hua hbh25y@gmail.com net: sched: fix possible refcount leak in tc_chain_tmplt_add()
Eric Dumazet edumazet@google.com net: sched: move rtm_tca_policy declaration to include file
Eric Dumazet edumazet@google.com rfs: annotate lockless accesses to RFS sock flow table
Eric Dumazet edumazet@google.com rfs: annotate lockless accesses to sk->sk_rxhash
Kuniyuki Iwashima kuniyu@amazon.com ipv6: rpl: Fix Route of Death.
Kuniyuki Iwashima kuniyu@amazon.com netfilter: ipset: Add schedule point in call_ad().
Tijs Van Buggenhout tijs.van.buggenhout@axsguard.com netfilter: conntrack: fix NULL pointer dereference in nf_confirm_cthelper
Manish Chopra manishc@marvell.com qed/qede: Fix scheduling while atomic
Sungwoo Kim iam@sung-woo.kim Bluetooth: L2CAP: Add missing checks for invalid DCID
Ying Hsu yinghsu@chromium.org Bluetooth: Fix l2cap_disconnect_req deadlock
Eric Dumazet edumazet@google.com net/sched: fq_pie: ensure reasonable TCA_FQ_PIE_QUANTUM values
Wen Gu guwen@linux.alibaba.com net/smc: Avoid to access invalid RMBs' MRs in SMCRv1 ADD LINK CONT
Alexander Sverdlin alexander.sverdlin@siemens.com net: dsa: lan9303: allow vid != 0 in port_fdb_{add|del} methods
Qingfang DENG qingfang.deng@siflower.com.cn neighbour: fix unaligned access to pneigh_entry
Lorenzo Bianconi lorenzo@kernel.org wifi: mt76: mt7615: fix possible race in mt7615_mac_sta_poll
David Howells dhowells@redhat.com afs: Fix setting of mtime when creating a file/dir/symlink
Stephan Gerhold stephan@gerhold.net spi: qup: Request DMA before enabling clocks
Stefan Wahren stefan.wahren@i2se.com staging: vchiq_core: drop vchiq_status from vchiq_initialise
Greg Kroah-Hartman gregkh@linuxfoundation.org i40e: fix build warning in ice_fltr_add_mac_to_list()
Greg Kroah-Hartman gregkh@linuxfoundation.org i40e: fix build warnings in i40e_alloc.h
Greg Kroah-Hartman gregkh@linuxfoundation.org i40iw: fix build warning in i40iw_manage_apbvt()
Jiri Slaby (SUSE) jirislaby@kernel.org block/blk-iocost (gcc13): keep large values in a new enum
Arnd Bergmann arnd@arndb.de blk-iocost: avoid 64-bit division in ioc_timer_fn
Qilin Tan qilin.tan@mediatek.com f2fs: fix iostat lock protection
Jiri Slaby (SUSE) jirislaby@kernel.org bonding (gcc13): synchronize bond_{a,t}lb_xmit() types
Christoph Hellwig hch@lst.de remove the sx8 block driver
Jiri Slaby (SUSE) jirislaby@kernel.org sfc (gcc13): synchronize ef100_enqueue_skb()'s return type
Kees Cook keescook@chromium.org gcc-plugins: Reorganize gimple includes for GCC 13
Arnd Bergmann arnd@arndb.de ata: ahci: fix enum constants for gcc-13
-------------
Diffstat:
Makefile | 4 +- arch/mips/include/asm/atomic.h | 2 +- arch/riscv/Kconfig | 1 + block/blk-iocost.c | 10 +- drivers/ata/ahci.h | 241 +-- drivers/block/Kconfig | 9 - drivers/block/Makefile | 2 - drivers/block/rbd.c | 62 +- drivers/block/sx8.c | 1586 -------------------- drivers/bluetooth/hci_qca.c | 6 +- drivers/gpu/drm/amd/amdgpu/vi.c | 11 +- drivers/gpu/drm/drm_atomic_uapi.c | 14 +- drivers/i2c/busses/i2c-sprd.c | 8 +- drivers/infiniband/hw/i40iw/i40iw.h | 5 +- drivers/input/joystick/xpad.c | 1 - drivers/input/mouse/elantech.c | 9 +- drivers/misc/eeprom/Kconfig | 1 + drivers/net/dsa/lan9303-core.c | 4 - drivers/net/ethernet/broadcom/bnxt/bnxt.c | 28 +- drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 2 +- drivers/net/ethernet/intel/i40e/i40e_alloc.h | 17 +- drivers/net/ethernet/intel/ice/ice_fltr.c | 2 +- drivers/net/ethernet/qlogic/qed/qed_l2.c | 2 +- drivers/net/ethernet/qlogic/qede/qede.h | 4 + drivers/net/ethernet/qlogic/qede/qede_ethtool.c | 24 +- drivers/net/ethernet/qlogic/qede/qede_main.c | 34 +- drivers/net/ethernet/sfc/ef100_tx.c | 3 +- drivers/net/wireless/mediatek/mt76/mt7615/mac.c | 3 + drivers/pinctrl/meson/pinctrl-meson-axg.c | 1 + drivers/s390/block/dasd_ioctl.c | 4 +- drivers/spi/spi-qup.c | 37 +- drivers/staging/rtl8192e/rtl8192e/rtl_core.c | 6 +- drivers/staging/rtl8192e/rtl8192e/rtl_core.h | 5 + .../vc04_services/interface/vchiq_arm/vchiq_arm.c | 24 +- drivers/tee/amdtee/amdtee_if.h | 10 +- drivers/tee/amdtee/call.c | 28 +- drivers/usb/core/buffer.c | 41 + drivers/usb/core/devio.c | 20 +- drivers/vhost/vhost.c | 18 +- drivers/vhost/vhost.h | 8 +- fs/afs/dir.c | 3 + fs/btrfs/relocation.c | 14 +- fs/ceph/caps.c | 6 + fs/ceph/snap.c | 4 +- fs/ext4/super.c | 6 +- fs/ext4/xattr.c | 6 +- fs/f2fs/sysfs.c | 4 +- fs/xfs/xfs_buf_item_recover.c | 10 + include/linux/netdevice.h | 7 +- include/linux/usb/hcd.h | 5 + include/net/bond_alb.h | 4 +- include/net/neighbour.h | 2 +- include/net/pkt_sched.h | 2 + include/net/rpl.h | 3 - include/net/sock.h | 18 +- kernel/trace/bpf_trace.c | 12 +- lib/cpu_rmap.c | 2 +- net/batman-adv/distributed-arp-table.c | 2 +- net/bluetooth/hci_core.c | 8 +- net/bluetooth/l2cap_core.c | 13 + net/can/j1939/main.c | 24 +- net/can/j1939/socket.c | 5 + net/core/dev.c | 6 +- net/ipv4/sysctl_net_ipv4.c | 2 - net/ipv6/exthdrs.c | 29 +- net/netfilter/ipset/ip_set_core.c | 8 + net/netfilter/nf_conntrack_core.c | 3 + net/sched/cls_api.c | 3 +- net/sched/sch_fq_pie.c | 8 +- net/smc/smc_llc.c | 4 +- scripts/gcc-plugins/gcc-common.h | 9 +- sound/pci/hda/patch_realtek.c | 2 + sound/soc/codecs/wsa881x.c | 1 - 73 files changed, 602 insertions(+), 1930 deletions(-)
From: Arnd Bergmann arnd@arndb.de
commit f07788079f515ca4a681c5f595bdad19cfbd7b1d upstream.
gcc-13 slightly changes the type of constant expressions that are defined in an enum, which triggers a compile time sanity check in libata:
linux/drivers/ata/libahci.c: In function 'ahci_led_store': linux/include/linux/compiler_types.h:357:45: error: call to '__compiletime_assert_302' declared with attribute error: BUILD_BUG_ON failed: sizeof(_s) > sizeof(long) 357 | _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__)
The new behavior is that sizeof() returns the same value for the constant as it does for the enum type, which is generally more sensible and consistent.
The problem in libata is that it contains a single enum definition for lots of unrelated constants, some of which are large positive (unsigned) integers like 0xffffffff, while others like (1<<31) are interpreted as negative integers, and this forces the enum type to become 64 bit wide even though most constants would still fit into a signed 32-bit 'int'.
Fix this by changing the entire enum definition to use BIT(x) in place of (1<<x), which results in all values being seen as 'unsigned' and fitting into an unsigned 32-bit type.
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=107917 Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=107405 Reported-by: Luis Machado luis.machado@arm.com Cc: linux-ide@vger.kernel.org Cc: Damien Le Moal damien.lemoal@opensource.wdc.com Cc: stable@vger.kernel.org Cc: Randy Dunlap rdunlap@infradead.org Signed-off-by: Arnd Bergmann arnd@arndb.de Tested-by: Luis Machado luis.machado@arm.com Signed-off-by: Damien Le Moal damien.lemoal@opensource.wdc.com [ Modified to account for slight differences in the enum contents in the 5.10.y tree.] Signed-off-by: Paul Barker paul.barker@sancloud.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/ata/ahci.h | 245 ++++++++++++++++++++++++++--------------------------- 1 file changed, 123 insertions(+), 122 deletions(-)
--- a/drivers/ata/ahci.h +++ b/drivers/ata/ahci.h @@ -24,6 +24,7 @@ #include <linux/libata.h> #include <linux/phy/phy.h> #include <linux/regulator/consumer.h> +#include <linux/bits.h>
/* Enclosure Management Control */ #define EM_CTRL_MSG_TYPE 0x000f0000 @@ -54,12 +55,12 @@ enum { AHCI_PORT_PRIV_FBS_DMA_SZ = AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_AR_SZ + (AHCI_RX_FIS_SZ * 16), - AHCI_IRQ_ON_SG = (1 << 31), - AHCI_CMD_ATAPI = (1 << 5), - AHCI_CMD_WRITE = (1 << 6), - AHCI_CMD_PREFETCH = (1 << 7), - AHCI_CMD_RESET = (1 << 8), - AHCI_CMD_CLR_BUSY = (1 << 10), + AHCI_IRQ_ON_SG = BIT(31), + AHCI_CMD_ATAPI = BIT(5), + AHCI_CMD_WRITE = BIT(6), + AHCI_CMD_PREFETCH = BIT(7), + AHCI_CMD_RESET = BIT(8), + AHCI_CMD_CLR_BUSY = BIT(10),
RX_FIS_PIO_SETUP = 0x20, /* offset of PIO Setup FIS data */ RX_FIS_D2H_REG = 0x40, /* offset of D2H Register FIS data */ @@ -77,37 +78,37 @@ enum { HOST_CAP2 = 0x24, /* host capabilities, extended */
/* HOST_CTL bits */ - HOST_RESET = (1 << 0), /* reset controller; self-clear */ - HOST_IRQ_EN = (1 << 1), /* global IRQ enable */ - HOST_MRSM = (1 << 2), /* MSI Revert to Single Message */ - HOST_AHCI_EN = (1 << 31), /* AHCI enabled */ + HOST_RESET = BIT(0), /* reset controller; self-clear */ + HOST_IRQ_EN = BIT(1), /* global IRQ enable */ + HOST_MRSM = BIT(2), /* MSI Revert to Single Message */ + HOST_AHCI_EN = BIT(31), /* AHCI enabled */
/* HOST_CAP bits */ - HOST_CAP_SXS = (1 << 5), /* Supports External SATA */ - HOST_CAP_EMS = (1 << 6), /* Enclosure Management support */ - HOST_CAP_CCC = (1 << 7), /* Command Completion Coalescing */ - HOST_CAP_PART = (1 << 13), /* Partial state capable */ - HOST_CAP_SSC = (1 << 14), /* Slumber state capable */ - HOST_CAP_PIO_MULTI = (1 << 15), /* PIO multiple DRQ support */ - HOST_CAP_FBS = (1 << 16), /* FIS-based switching support */ - HOST_CAP_PMP = (1 << 17), /* Port Multiplier support */ - HOST_CAP_ONLY = (1 << 18), /* Supports AHCI mode only */ - HOST_CAP_CLO = (1 << 24), /* Command List Override support */ - HOST_CAP_LED = (1 << 25), /* Supports activity LED */ - HOST_CAP_ALPM = (1 << 26), /* Aggressive Link PM support */ - HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */ - HOST_CAP_MPS = (1 << 28), /* Mechanical presence switch */ - HOST_CAP_SNTF = (1 << 29), /* SNotification register */ - HOST_CAP_NCQ = (1 << 30), /* Native Command Queueing */ - HOST_CAP_64 = (1 << 31), /* PCI DAC (64-bit DMA) support */ + HOST_CAP_SXS = BIT(5), /* Supports External SATA */ + HOST_CAP_EMS = BIT(6), /* Enclosure Management support */ + HOST_CAP_CCC = BIT(7), /* Command Completion Coalescing */ + HOST_CAP_PART = BIT(13), /* Partial state capable */ + HOST_CAP_SSC = BIT(14), /* Slumber state capable */ + HOST_CAP_PIO_MULTI = BIT(15), /* PIO multiple DRQ support */ + HOST_CAP_FBS = BIT(16), /* FIS-based switching support */ + HOST_CAP_PMP = BIT(17), /* Port Multiplier support */ + HOST_CAP_ONLY = BIT(18), /* Supports AHCI mode only */ + HOST_CAP_CLO = BIT(24), /* Command List Override support */ + HOST_CAP_LED = BIT(25), /* Supports activity LED */ + HOST_CAP_ALPM = BIT(26), /* Aggressive Link PM support */ + HOST_CAP_SSS = BIT(27), /* Staggered Spin-up */ + HOST_CAP_MPS = BIT(28), /* Mechanical presence switch */ + HOST_CAP_SNTF = BIT(29), /* SNotification register */ + HOST_CAP_NCQ = BIT(30), /* Native Command Queueing */ + HOST_CAP_64 = BIT(31), /* PCI DAC (64-bit DMA) support */
/* HOST_CAP2 bits */ - HOST_CAP2_BOH = (1 << 0), /* BIOS/OS handoff supported */ - HOST_CAP2_NVMHCI = (1 << 1), /* NVMHCI supported */ - HOST_CAP2_APST = (1 << 2), /* Automatic partial to slumber */ - HOST_CAP2_SDS = (1 << 3), /* Support device sleep */ - HOST_CAP2_SADM = (1 << 4), /* Support aggressive DevSlp */ - HOST_CAP2_DESO = (1 << 5), /* DevSlp from slumber only */ + HOST_CAP2_BOH = BIT(0), /* BIOS/OS handoff supported */ + HOST_CAP2_NVMHCI = BIT(1), /* NVMHCI supported */ + HOST_CAP2_APST = BIT(2), /* Automatic partial to slumber */ + HOST_CAP2_SDS = BIT(3), /* Support device sleep */ + HOST_CAP2_SADM = BIT(4), /* Support aggressive DevSlp */ + HOST_CAP2_DESO = BIT(5), /* DevSlp from slumber only */
/* registers for each SATA port */ PORT_LST_ADDR = 0x00, /* command list DMA addr */ @@ -129,24 +130,24 @@ enum { PORT_DEVSLP = 0x44, /* device sleep */
/* PORT_IRQ_{STAT,MASK} bits */ - PORT_IRQ_COLD_PRES = (1 << 31), /* cold presence detect */ - PORT_IRQ_TF_ERR = (1 << 30), /* task file error */ - PORT_IRQ_HBUS_ERR = (1 << 29), /* host bus fatal error */ - PORT_IRQ_HBUS_DATA_ERR = (1 << 28), /* host bus data error */ - PORT_IRQ_IF_ERR = (1 << 27), /* interface fatal error */ - PORT_IRQ_IF_NONFATAL = (1 << 26), /* interface non-fatal error */ - PORT_IRQ_OVERFLOW = (1 << 24), /* xfer exhausted available S/G */ - PORT_IRQ_BAD_PMP = (1 << 23), /* incorrect port multiplier */ - - PORT_IRQ_PHYRDY = (1 << 22), /* PhyRdy changed */ - PORT_IRQ_DEV_ILCK = (1 << 7), /* device interlock */ - PORT_IRQ_CONNECT = (1 << 6), /* port connect change status */ - PORT_IRQ_SG_DONE = (1 << 5), /* descriptor processed */ - PORT_IRQ_UNK_FIS = (1 << 4), /* unknown FIS rx'd */ - PORT_IRQ_SDB_FIS = (1 << 3), /* Set Device Bits FIS rx'd */ - PORT_IRQ_DMAS_FIS = (1 << 2), /* DMA Setup FIS rx'd */ - PORT_IRQ_PIOS_FIS = (1 << 1), /* PIO Setup FIS rx'd */ - PORT_IRQ_D2H_REG_FIS = (1 << 0), /* D2H Register FIS rx'd */ + PORT_IRQ_COLD_PRES = BIT(31), /* cold presence detect */ + PORT_IRQ_TF_ERR = BIT(30), /* task file error */ + PORT_IRQ_HBUS_ERR = BIT(29), /* host bus fatal error */ + PORT_IRQ_HBUS_DATA_ERR = BIT(28), /* host bus data error */ + PORT_IRQ_IF_ERR = BIT(27), /* interface fatal error */ + PORT_IRQ_IF_NONFATAL = BIT(26), /* interface non-fatal error */ + PORT_IRQ_OVERFLOW = BIT(24), /* xfer exhausted available S/G */ + PORT_IRQ_BAD_PMP = BIT(23), /* incorrect port multiplier */ + + PORT_IRQ_PHYRDY = BIT(22), /* PhyRdy changed */ + PORT_IRQ_DEV_ILCK = BIT(7), /* device interlock */ + PORT_IRQ_CONNECT = BIT(6), /* port connect change status */ + PORT_IRQ_SG_DONE = BIT(5), /* descriptor processed */ + PORT_IRQ_UNK_FIS = BIT(4), /* unknown FIS rx'd */ + PORT_IRQ_SDB_FIS = BIT(3), /* Set Device Bits FIS rx'd */ + PORT_IRQ_DMAS_FIS = BIT(2), /* DMA Setup FIS rx'd */ + PORT_IRQ_PIOS_FIS = BIT(1), /* PIO Setup FIS rx'd */ + PORT_IRQ_D2H_REG_FIS = BIT(0), /* D2H Register FIS rx'd */
PORT_IRQ_FREEZE = PORT_IRQ_HBUS_ERR | PORT_IRQ_IF_ERR | @@ -162,34 +163,34 @@ enum { PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS,
/* PORT_CMD bits */ - PORT_CMD_ASP = (1 << 27), /* Aggressive Slumber/Partial */ - PORT_CMD_ALPE = (1 << 26), /* Aggressive Link PM enable */ - PORT_CMD_ATAPI = (1 << 24), /* Device is ATAPI */ - PORT_CMD_FBSCP = (1 << 22), /* FBS Capable Port */ - PORT_CMD_ESP = (1 << 21), /* External Sata Port */ - PORT_CMD_HPCP = (1 << 18), /* HotPlug Capable Port */ - PORT_CMD_PMP = (1 << 17), /* PMP attached */ - PORT_CMD_LIST_ON = (1 << 15), /* cmd list DMA engine running */ - PORT_CMD_FIS_ON = (1 << 14), /* FIS DMA engine running */ - PORT_CMD_FIS_RX = (1 << 4), /* Enable FIS receive DMA engine */ - PORT_CMD_CLO = (1 << 3), /* Command list override */ - PORT_CMD_POWER_ON = (1 << 2), /* Power up device */ - PORT_CMD_SPIN_UP = (1 << 1), /* Spin up device */ - PORT_CMD_START = (1 << 0), /* Enable port DMA engine */ - - PORT_CMD_ICC_MASK = (0xf << 28), /* i/f ICC state mask */ - PORT_CMD_ICC_ACTIVE = (0x1 << 28), /* Put i/f in active state */ - PORT_CMD_ICC_PARTIAL = (0x2 << 28), /* Put i/f in partial state */ - PORT_CMD_ICC_SLUMBER = (0x6 << 28), /* Put i/f in slumber state */ + PORT_CMD_ASP = BIT(27), /* Aggressive Slumber/Partial */ + PORT_CMD_ALPE = BIT(26), /* Aggressive Link PM enable */ + PORT_CMD_ATAPI = BIT(24), /* Device is ATAPI */ + PORT_CMD_FBSCP = BIT(22), /* FBS Capable Port */ + PORT_CMD_ESP = BIT(21), /* External Sata Port */ + PORT_CMD_HPCP = BIT(18), /* HotPlug Capable Port */ + PORT_CMD_PMP = BIT(17), /* PMP attached */ + PORT_CMD_LIST_ON = BIT(15), /* cmd list DMA engine running */ + PORT_CMD_FIS_ON = BIT(14), /* FIS DMA engine running */ + PORT_CMD_FIS_RX = BIT(4), /* Enable FIS receive DMA engine */ + PORT_CMD_CLO = BIT(3), /* Command list override */ + PORT_CMD_POWER_ON = BIT(2), /* Power up device */ + PORT_CMD_SPIN_UP = BIT(1), /* Spin up device */ + PORT_CMD_START = BIT(0), /* Enable port DMA engine */ + + PORT_CMD_ICC_MASK = (0xfu << 28), /* i/f ICC state mask */ + PORT_CMD_ICC_ACTIVE = (0x1u << 28), /* Put i/f in active state */ + PORT_CMD_ICC_PARTIAL = (0x2u << 28), /* Put i/f in partial state */ + PORT_CMD_ICC_SLUMBER = (0x6u << 28), /* Put i/f in slumber state */
/* PORT_FBS bits */ PORT_FBS_DWE_OFFSET = 16, /* FBS device with error offset */ PORT_FBS_ADO_OFFSET = 12, /* FBS active dev optimization offset */ PORT_FBS_DEV_OFFSET = 8, /* FBS device to issue offset */ PORT_FBS_DEV_MASK = (0xf << PORT_FBS_DEV_OFFSET), /* FBS.DEV */ - PORT_FBS_SDE = (1 << 2), /* FBS single device error */ - PORT_FBS_DEC = (1 << 1), /* FBS device error clear */ - PORT_FBS_EN = (1 << 0), /* Enable FBS */ + PORT_FBS_SDE = BIT(2), /* FBS single device error */ + PORT_FBS_DEC = BIT(1), /* FBS device error clear */ + PORT_FBS_EN = BIT(0), /* Enable FBS */
/* PORT_DEVSLP bits */ PORT_DEVSLP_DM_OFFSET = 25, /* DITO multiplier offset */ @@ -197,52 +198,52 @@ enum { PORT_DEVSLP_DITO_OFFSET = 15, /* DITO offset */ PORT_DEVSLP_MDAT_OFFSET = 10, /* Minimum assertion time */ PORT_DEVSLP_DETO_OFFSET = 2, /* DevSlp exit timeout */ - PORT_DEVSLP_DSP = (1 << 1), /* DevSlp present */ - PORT_DEVSLP_ADSE = (1 << 0), /* Aggressive DevSlp enable */ + PORT_DEVSLP_DSP = BIT(1), /* DevSlp present */ + PORT_DEVSLP_ADSE = BIT(0), /* Aggressive DevSlp enable */
/* hpriv->flags bits */
#define AHCI_HFLAGS(flags) .private_data = (void *)(flags)
- AHCI_HFLAG_NO_NCQ = (1 << 0), - AHCI_HFLAG_IGN_IRQ_IF_ERR = (1 << 1), /* ignore IRQ_IF_ERR */ - AHCI_HFLAG_IGN_SERR_INTERNAL = (1 << 2), /* ignore SERR_INTERNAL */ - AHCI_HFLAG_32BIT_ONLY = (1 << 3), /* force 32bit */ - AHCI_HFLAG_MV_PATA = (1 << 4), /* PATA port */ - AHCI_HFLAG_NO_MSI = (1 << 5), /* no PCI MSI */ - AHCI_HFLAG_NO_PMP = (1 << 6), /* no PMP */ - AHCI_HFLAG_SECT255 = (1 << 8), /* max 255 sectors */ - AHCI_HFLAG_YES_NCQ = (1 << 9), /* force NCQ cap on */ - AHCI_HFLAG_NO_SUSPEND = (1 << 10), /* don't suspend */ - AHCI_HFLAG_SRST_TOUT_IS_OFFLINE = (1 << 11), /* treat SRST timeout as - link offline */ - AHCI_HFLAG_NO_SNTF = (1 << 12), /* no sntf */ - AHCI_HFLAG_NO_FPDMA_AA = (1 << 13), /* no FPDMA AA */ - AHCI_HFLAG_YES_FBS = (1 << 14), /* force FBS cap on */ - AHCI_HFLAG_DELAY_ENGINE = (1 << 15), /* do not start engine on - port start (wait until - error-handling stage) */ - AHCI_HFLAG_NO_DEVSLP = (1 << 17), /* no device sleep */ - AHCI_HFLAG_NO_FBS = (1 << 18), /* no FBS */ + AHCI_HFLAG_NO_NCQ = BIT(0), + AHCI_HFLAG_IGN_IRQ_IF_ERR = BIT(1), /* ignore IRQ_IF_ERR */ + AHCI_HFLAG_IGN_SERR_INTERNAL = BIT(2), /* ignore SERR_INTERNAL */ + AHCI_HFLAG_32BIT_ONLY = BIT(3), /* force 32bit */ + AHCI_HFLAG_MV_PATA = BIT(4), /* PATA port */ + AHCI_HFLAG_NO_MSI = BIT(5), /* no PCI MSI */ + AHCI_HFLAG_NO_PMP = BIT(6), /* no PMP */ + AHCI_HFLAG_SECT255 = BIT(8), /* max 255 sectors */ + AHCI_HFLAG_YES_NCQ = BIT(9), /* force NCQ cap on */ + AHCI_HFLAG_NO_SUSPEND = BIT(10), /* don't suspend */ + AHCI_HFLAG_SRST_TOUT_IS_OFFLINE = BIT(11), /* treat SRST timeout as + link offline */ + AHCI_HFLAG_NO_SNTF = BIT(12), /* no sntf */ + AHCI_HFLAG_NO_FPDMA_AA = BIT(13), /* no FPDMA AA */ + AHCI_HFLAG_YES_FBS = BIT(14), /* force FBS cap on */ + AHCI_HFLAG_DELAY_ENGINE = BIT(15), /* do not start engine on + port start (wait until + error-handling stage) */ + AHCI_HFLAG_NO_DEVSLP = BIT(17), /* no device sleep */ + AHCI_HFLAG_NO_FBS = BIT(18), /* no FBS */
#ifdef CONFIG_PCI_MSI - AHCI_HFLAG_MULTI_MSI = (1 << 20), /* per-port MSI(-X) */ + AHCI_HFLAG_MULTI_MSI = BIT(20), /* per-port MSI(-X) */ #else /* compile out MSI infrastructure */ AHCI_HFLAG_MULTI_MSI = 0, #endif - AHCI_HFLAG_WAKE_BEFORE_STOP = (1 << 22), /* wake before DMA stop */ - AHCI_HFLAG_YES_ALPM = (1 << 23), /* force ALPM cap on */ - AHCI_HFLAG_NO_WRITE_TO_RO = (1 << 24), /* don't write to read - only registers */ - AHCI_HFLAG_IS_MOBILE = (1 << 25), /* mobile chipset, use - SATA_MOBILE_LPM_POLICY - as default lpm_policy */ - AHCI_HFLAG_SUSPEND_PHYS = (1 << 26), /* handle PHYs during - suspend/resume */ - AHCI_HFLAG_IGN_NOTSUPP_POWER_ON = (1 << 27), /* ignore -EOPNOTSUPP - from phy_power_on() */ - AHCI_HFLAG_NO_SXS = (1 << 28), /* SXS not supported */ + AHCI_HFLAG_WAKE_BEFORE_STOP = BIT(22), /* wake before DMA stop */ + AHCI_HFLAG_YES_ALPM = BIT(23), /* force ALPM cap on */ + AHCI_HFLAG_NO_WRITE_TO_RO = BIT(24), /* don't write to read + only registers */ + AHCI_HFLAG_IS_MOBILE = BIT(25), /* mobile chipset, use + SATA_MOBILE_LPM_POLICY + as default lpm_policy */ + AHCI_HFLAG_SUSPEND_PHYS = BIT(26), /* handle PHYs during + suspend/resume */ + AHCI_HFLAG_IGN_NOTSUPP_POWER_ON = BIT(27), /* ignore -EOPNOTSUPP + from phy_power_on() */ + AHCI_HFLAG_NO_SXS = BIT(28), /* SXS not supported */
/* ap->flags bits */
@@ -258,22 +259,22 @@ enum { EM_MAX_RETRY = 5,
/* em_ctl bits */ - EM_CTL_RST = (1 << 9), /* Reset */ - EM_CTL_TM = (1 << 8), /* Transmit Message */ - EM_CTL_MR = (1 << 0), /* Message Received */ - EM_CTL_ALHD = (1 << 26), /* Activity LED */ - EM_CTL_XMT = (1 << 25), /* Transmit Only */ - EM_CTL_SMB = (1 << 24), /* Single Message Buffer */ - EM_CTL_SGPIO = (1 << 19), /* SGPIO messages supported */ - EM_CTL_SES = (1 << 18), /* SES-2 messages supported */ - EM_CTL_SAFTE = (1 << 17), /* SAF-TE messages supported */ - EM_CTL_LED = (1 << 16), /* LED messages supported */ + EM_CTL_RST = BIT(9), /* Reset */ + EM_CTL_TM = BIT(8), /* Transmit Message */ + EM_CTL_MR = BIT(0), /* Message Received */ + EM_CTL_ALHD = BIT(26), /* Activity LED */ + EM_CTL_XMT = BIT(25), /* Transmit Only */ + EM_CTL_SMB = BIT(24), /* Single Message Buffer */ + EM_CTL_SGPIO = BIT(19), /* SGPIO messages supported */ + EM_CTL_SES = BIT(18), /* SES-2 messages supported */ + EM_CTL_SAFTE = BIT(17), /* SAF-TE messages supported */ + EM_CTL_LED = BIT(16), /* LED messages supported */
/* em message type */ - EM_MSG_TYPE_LED = (1 << 0), /* LED */ - EM_MSG_TYPE_SAFTE = (1 << 1), /* SAF-TE */ - EM_MSG_TYPE_SES2 = (1 << 2), /* SES-2 */ - EM_MSG_TYPE_SGPIO = (1 << 3), /* SGPIO */ + EM_MSG_TYPE_LED = BIT(0), /* LED */ + EM_MSG_TYPE_SAFTE = BIT(1), /* SAF-TE */ + EM_MSG_TYPE_SES2 = BIT(2), /* SES-2 */ + EM_MSG_TYPE_SGPIO = BIT(3), /* SGPIO */ };
struct ahci_cmd_hdr {
From: Kees Cook keescook@chromium.org
mainline commit: e6a71160cc145e18ab45195abf89884112e02dfb
The gimple-iterator.h header must be included before gimple-fold.h starting with GCC 13. Reorganize gimple headers to work for all GCC versions.
Reported-by: Palmer Dabbelt palmer@rivosinc.com Acked-by: Palmer Dabbelt palmer@rivosinc.com Link: https://lore.kernel.org/all/20230113173033.4380-1-palmer@rivosinc.com/ Cc: linux-hardening@vger.kernel.org Signed-off-by: Kees Cook keescook@chromium.org [ Modified to handle differences in other includes and conditional compilation in the 5.10.y tree. ] Signed-off-by: Paul Barker paul.barker@sancloud.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- scripts/gcc-plugins/gcc-common.h | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
--- a/scripts/gcc-plugins/gcc-common.h +++ b/scripts/gcc-plugins/gcc-common.h @@ -108,7 +108,13 @@ #include "varasm.h" #include "stor-layout.h" #include "internal-fn.h" +#endif + +#include "gimple.h" + +#if BUILDING_GCC_VERSION >= 4009 #include "gimple-expr.h" +#include "gimple-iterator.h" #include "gimple-fold.h" #include "context.h" #include "tree-ssa-alias.h" @@ -124,13 +130,10 @@ #include "gimplify.h" #endif
-#include "gimple.h" - #if BUILDING_GCC_VERSION >= 4009 #include "tree-ssa-operands.h" #include "tree-phinodes.h" #include "tree-cfg.h" -#include "gimple-iterator.h" #include "gimple-ssa.h" #include "ssa-iterators.h" #endif
From: Jiri Slaby (SUSE) jirislaby@kernel.org
commit 3319dbb3e755398f254c3daa04b9030197137efe upstream.
ef100_enqueue_skb() generates a valid warning with gcc-13: drivers/net/ethernet/sfc/ef100_tx.c:370:5: error: conflicting types for 'ef100_enqueue_skb' due to enum/integer mismatch; have 'int(struct efx_tx_queue *, struct sk_buff *)' drivers/net/ethernet/sfc/ef100_tx.h:25:13: note: previous declaration of 'ef100_enqueue_skb' with type 'netdev_tx_t(struct efx_tx_queue *, struct sk_buff *)'
I.e. the type of the ef100_enqueue_skb()'s return value in the declaration is int, while the definition spells enum netdev_tx_t. Synchronize them to the latter.
Cc: Martin Liska mliska@suse.cz Cc: Edward Cree ecree.xilinx@gmail.com Cc: Martin Habets habetsm.xilinx@gmail.com Signed-off-by: Jiri Slaby (SUSE) jirislaby@kernel.org Link: https://lore.kernel.org/r/20221031114440.10461-1-jirislaby@kernel.org Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/sfc/ef100_tx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
--- a/drivers/net/ethernet/sfc/ef100_tx.c +++ b/drivers/net/ethernet/sfc/ef100_tx.c @@ -333,7 +333,8 @@ void ef100_ev_tx(struct efx_channel *cha * Returns 0 on success, error code otherwise. In case of an error this * function will free the SKB. */ -int ef100_enqueue_skb(struct efx_tx_queue *tx_queue, struct sk_buff *skb) +netdev_tx_t ef100_enqueue_skb(struct efx_tx_queue *tx_queue, + struct sk_buff *skb) { unsigned int old_insert_count = tx_queue->insert_count; struct efx_nic *efx = tx_queue->efx;
From: Christoph Hellwig hch@lst.de
commit d13bc4d84a8e91060d3797fc95c1a0202bfd1499 upstream.
This driver is for fairly obscure hardware, and has only seen random drive-by changes after the maintainer stopped working on it in 2005 (about a year and a half after it was introduced). It has some "interesting" block layer interactions, so let's just drop it unless anyone complains.
Signed-off-by: Christoph Hellwig hch@lst.de Link: https://lore.kernel.org/r/20220721064102.1715460-1-hch@lst.de [axboe: fix date typo, it was in 2005, not 2015] Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/block/Kconfig | 9 drivers/block/Makefile | 2 drivers/block/sx8.c | 1586 ------------------------------------------------- 3 files changed, 1597 deletions(-) delete mode 100644 drivers/block/sx8.c
--- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -293,15 +293,6 @@ config BLK_DEV_SKD
Use device /dev/skd$N amd /dev/skd$Np$M.
-config BLK_DEV_SX8 - tristate "Promise SATA SX8 support" - depends on PCI - help - Saying Y or M here will enable support for the - Promise SATA SX8 controllers. - - Use devices /dev/sx8/$N and /dev/sx8/$Np$M. - config BLK_DEV_RAM tristate "RAM block device support" help --- a/drivers/block/Makefile +++ b/drivers/block/Makefile @@ -29,8 +29,6 @@ obj-$(CONFIG_BLK_DEV_NBD) += nbd.o obj-$(CONFIG_BLK_DEV_CRYPTOLOOP) += cryptoloop.o obj-$(CONFIG_VIRTIO_BLK) += virtio_blk.o
-obj-$(CONFIG_BLK_DEV_SX8) += sx8.o - obj-$(CONFIG_XEN_BLKDEV_FRONTEND) += xen-blkfront.o obj-$(CONFIG_XEN_BLKDEV_BACKEND) += xen-blkback/ obj-$(CONFIG_BLK_DEV_DRBD) += drbd/ --- a/drivers/block/sx8.c +++ /dev/null @@ -1,1586 +0,0 @@ -/* - * sx8.c: Driver for Promise SATA SX8 looks-like-I2O hardware - * - * Copyright 2004-2005 Red Hat, Inc. - * - * Author/maintainer: Jeff Garzik jgarzik@pobox.com - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/init.h> -#include <linux/pci.h> -#include <linux/slab.h> -#include <linux/spinlock.h> -#include <linux/blk-mq.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/compiler.h> -#include <linux/workqueue.h> -#include <linux/bitops.h> -#include <linux/delay.h> -#include <linux/ktime.h> -#include <linux/hdreg.h> -#include <linux/dma-mapping.h> -#include <linux/completion.h> -#include <linux/scatterlist.h> -#include <asm/io.h> -#include <linux/uaccess.h> - -#if 0 -#define CARM_DEBUG -#define CARM_VERBOSE_DEBUG -#else -#undef CARM_DEBUG -#undef CARM_VERBOSE_DEBUG -#endif -#undef CARM_NDEBUG - -#define DRV_NAME "sx8" -#define DRV_VERSION "1.0" -#define PFX DRV_NAME ": " - -MODULE_AUTHOR("Jeff Garzik"); -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("Promise SATA SX8 block driver"); -MODULE_VERSION(DRV_VERSION); - -/* - * SX8 hardware has a single message queue for all ATA ports. - * When this driver was written, the hardware (firmware?) would - * corrupt data eventually, if more than one request was outstanding. - * As one can imagine, having 8 ports bottlenecking on a single - * command hurts performance. - * - * Based on user reports, later versions of the hardware (firmware?) - * seem to be able to survive with more than one command queued. - * - * Therefore, we default to the safe option -- 1 command -- but - * allow the user to increase this. - * - * SX8 should be able to support up to ~60 queued commands (CARM_MAX_REQ), - * but problems seem to occur when you exceed ~30, even on newer hardware. - */ -static int max_queue = 1; -module_param(max_queue, int, 0444); -MODULE_PARM_DESC(max_queue, "Maximum number of queued commands. (min==1, max==30, safe==1)"); - - -#define NEXT_RESP(idx) ((idx + 1) % RMSG_Q_LEN) - -/* 0xf is just arbitrary, non-zero noise; this is sorta like poisoning */ -#define TAG_ENCODE(tag) (((tag) << 16) | 0xf) -#define TAG_DECODE(tag) (((tag) >> 16) & 0x1f) -#define TAG_VALID(tag) ((((tag) & 0xf) == 0xf) && (TAG_DECODE(tag) < 32)) - -/* note: prints function name for you */ -#ifdef CARM_DEBUG -#define DPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args) -#ifdef CARM_VERBOSE_DEBUG -#define VPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args) -#else -#define VPRINTK(fmt, args...) -#endif /* CARM_VERBOSE_DEBUG */ -#else -#define DPRINTK(fmt, args...) -#define VPRINTK(fmt, args...) -#endif /* CARM_DEBUG */ - -#ifdef CARM_NDEBUG -#define assert(expr) -#else -#define assert(expr) \ - if(unlikely(!(expr))) { \ - printk(KERN_ERR "Assertion failed! %s,%s,%s,line=%d\n", \ - #expr, __FILE__, __func__, __LINE__); \ - } -#endif - -/* defines only for the constants which don't work well as enums */ -struct carm_host; - -enum { - /* adapter-wide limits */ - CARM_MAX_PORTS = 8, - CARM_SHM_SIZE = (4096 << 7), - CARM_MINORS_PER_MAJOR = 256 / CARM_MAX_PORTS, - CARM_MAX_WAIT_Q = CARM_MAX_PORTS + 1, - - /* command message queue limits */ - CARM_MAX_REQ = 64, /* max command msgs per host */ - CARM_MSG_LOW_WATER = (CARM_MAX_REQ / 4), /* refill mark */ - - /* S/G limits, host-wide and per-request */ - CARM_MAX_REQ_SG = 32, /* max s/g entries per request */ - CARM_MAX_HOST_SG = 600, /* max s/g entries per host */ - CARM_SG_LOW_WATER = (CARM_MAX_HOST_SG / 4), /* re-fill mark */ - - /* hardware registers */ - CARM_IHQP = 0x1c, - CARM_INT_STAT = 0x10, /* interrupt status */ - CARM_INT_MASK = 0x14, /* interrupt mask */ - CARM_HMUC = 0x18, /* host message unit control */ - RBUF_ADDR_LO = 0x20, /* response msg DMA buf low 32 bits */ - RBUF_ADDR_HI = 0x24, /* response msg DMA buf high 32 bits */ - RBUF_BYTE_SZ = 0x28, - CARM_RESP_IDX = 0x2c, - CARM_CMS0 = 0x30, /* command message size reg 0 */ - CARM_LMUC = 0x48, - CARM_HMPHA = 0x6c, - CARM_INITC = 0xb5, - - /* bits in CARM_INT_{STAT,MASK} */ - INT_RESERVED = 0xfffffff0, - INT_WATCHDOG = (1 << 3), /* watchdog timer */ - INT_Q_OVERFLOW = (1 << 2), /* cmd msg q overflow */ - INT_Q_AVAILABLE = (1 << 1), /* cmd msg q has free space */ - INT_RESPONSE = (1 << 0), /* response msg available */ - INT_ACK_MASK = INT_WATCHDOG | INT_Q_OVERFLOW, - INT_DEF_MASK = INT_RESERVED | INT_Q_OVERFLOW | - INT_RESPONSE, - - /* command messages, and related register bits */ - CARM_HAVE_RESP = 0x01, - CARM_MSG_READ = 1, - CARM_MSG_WRITE = 2, - CARM_MSG_VERIFY = 3, - CARM_MSG_GET_CAPACITY = 4, - CARM_MSG_FLUSH = 5, - CARM_MSG_IOCTL = 6, - CARM_MSG_ARRAY = 8, - CARM_MSG_MISC = 9, - CARM_CME = (1 << 2), - CARM_RME = (1 << 1), - CARM_WZBC = (1 << 0), - CARM_RMI = (1 << 0), - CARM_Q_FULL = (1 << 3), - CARM_MSG_SIZE = 288, - CARM_Q_LEN = 48, - - /* CARM_MSG_IOCTL messages */ - CARM_IOC_SCAN_CHAN = 5, /* scan channels for devices */ - CARM_IOC_GET_TCQ = 13, /* get tcq/ncq depth */ - CARM_IOC_SET_TCQ = 14, /* set tcq/ncq depth */ - - IOC_SCAN_CHAN_NODEV = 0x1f, - IOC_SCAN_CHAN_OFFSET = 0x40, - - /* CARM_MSG_ARRAY messages */ - CARM_ARRAY_INFO = 0, - - ARRAY_NO_EXIST = (1 << 31), - - /* response messages */ - RMSG_SZ = 8, /* sizeof(struct carm_response) */ - RMSG_Q_LEN = 48, /* resp. msg list length */ - RMSG_OK = 1, /* bit indicating msg was successful */ - /* length of entire resp. msg buffer */ - RBUF_LEN = RMSG_SZ * RMSG_Q_LEN, - - PDC_SHM_SIZE = (4096 << 7), /* length of entire h/w buffer */ - - /* CARM_MSG_MISC messages */ - MISC_GET_FW_VER = 2, - MISC_ALLOC_MEM = 3, - MISC_SET_TIME = 5, - - /* MISC_GET_FW_VER feature bits */ - FW_VER_4PORT = (1 << 2), /* 1=4 ports, 0=8 ports */ - FW_VER_NON_RAID = (1 << 1), /* 1=non-RAID firmware, 0=RAID */ - FW_VER_ZCR = (1 << 0), /* zero channel RAID (whatever that is) */ - - /* carm_host flags */ - FL_NON_RAID = FW_VER_NON_RAID, - FL_4PORT = FW_VER_4PORT, - FL_FW_VER_MASK = (FW_VER_NON_RAID | FW_VER_4PORT), - FL_DYN_MAJOR = (1 << 17), -}; - -enum { - CARM_SG_BOUNDARY = 0xffffUL, /* s/g segment boundary */ -}; - -enum scatter_gather_types { - SGT_32BIT = 0, - SGT_64BIT = 1, -}; - -enum host_states { - HST_INVALID, /* invalid state; never used */ - HST_ALLOC_BUF, /* setting up master SHM area */ - HST_ERROR, /* we never leave here */ - HST_PORT_SCAN, /* start dev scan */ - HST_DEV_SCAN_START, /* start per-device probe */ - HST_DEV_SCAN, /* continue per-device probe */ - HST_DEV_ACTIVATE, /* activate devices we found */ - HST_PROBE_FINISHED, /* probe is complete */ - HST_PROBE_START, /* initiate probe */ - HST_SYNC_TIME, /* tell firmware what time it is */ - HST_GET_FW_VER, /* get firmware version, adapter port cnt */ -}; - -#ifdef CARM_DEBUG -static const char *state_name[] = { - "HST_INVALID", - "HST_ALLOC_BUF", - "HST_ERROR", - "HST_PORT_SCAN", - "HST_DEV_SCAN_START", - "HST_DEV_SCAN", - "HST_DEV_ACTIVATE", - "HST_PROBE_FINISHED", - "HST_PROBE_START", - "HST_SYNC_TIME", - "HST_GET_FW_VER", -}; -#endif - -struct carm_port { - unsigned int port_no; - struct gendisk *disk; - struct carm_host *host; - - /* attached device characteristics */ - u64 capacity; - char name[41]; - u16 dev_geom_head; - u16 dev_geom_sect; - u16 dev_geom_cyl; -}; - -struct carm_request { - int n_elem; - unsigned int msg_type; - unsigned int msg_subtype; - unsigned int msg_bucket; - struct scatterlist sg[CARM_MAX_REQ_SG]; -}; - -struct carm_host { - unsigned long flags; - void __iomem *mmio; - void *shm; - dma_addr_t shm_dma; - - int major; - int id; - char name[32]; - - spinlock_t lock; - struct pci_dev *pdev; - unsigned int state; - u32 fw_ver; - - struct blk_mq_tag_set tag_set; - struct request_queue *oob_q; - unsigned int n_oob; - - unsigned int hw_sg_used; - - unsigned int resp_idx; - - unsigned int wait_q_prod; - unsigned int wait_q_cons; - struct request_queue *wait_q[CARM_MAX_WAIT_Q]; - - void *msg_base; - dma_addr_t msg_dma; - - int cur_scan_dev; - unsigned long dev_active; - unsigned long dev_present; - struct carm_port port[CARM_MAX_PORTS]; - - struct work_struct fsm_task; - - struct completion probe_comp; -}; - -struct carm_response { - __le32 ret_handle; - __le32 status; -} __attribute__((packed)); - -struct carm_msg_sg { - __le32 start; - __le32 len; -} __attribute__((packed)); - -struct carm_msg_rw { - u8 type; - u8 id; - u8 sg_count; - u8 sg_type; - __le32 handle; - __le32 lba; - __le16 lba_count; - __le16 lba_high; - struct carm_msg_sg sg[32]; -} __attribute__((packed)); - -struct carm_msg_allocbuf { - u8 type; - u8 subtype; - u8 n_sg; - u8 sg_type; - __le32 handle; - __le32 addr; - __le32 len; - __le32 evt_pool; - __le32 n_evt; - __le32 rbuf_pool; - __le32 n_rbuf; - __le32 msg_pool; - __le32 n_msg; - struct carm_msg_sg sg[8]; -} __attribute__((packed)); - -struct carm_msg_ioctl { - u8 type; - u8 subtype; - u8 array_id; - u8 reserved1; - __le32 handle; - __le32 data_addr; - u32 reserved2; -} __attribute__((packed)); - -struct carm_msg_sync_time { - u8 type; - u8 subtype; - u16 reserved1; - __le32 handle; - u32 reserved2; - __le32 timestamp; -} __attribute__((packed)); - -struct carm_msg_get_fw_ver { - u8 type; - u8 subtype; - u16 reserved1; - __le32 handle; - __le32 data_addr; - u32 reserved2; -} __attribute__((packed)); - -struct carm_fw_ver { - __le32 version; - u8 features; - u8 reserved1; - u16 reserved2; -} __attribute__((packed)); - -struct carm_array_info { - __le32 size; - - __le16 size_hi; - __le16 stripe_size; - - __le32 mode; - - __le16 stripe_blk_sz; - __le16 reserved1; - - __le16 cyl; - __le16 head; - - __le16 sect; - u8 array_id; - u8 reserved2; - - char name[40]; - - __le32 array_status; - - /* device list continues beyond this point? */ -} __attribute__((packed)); - -static int carm_init_one (struct pci_dev *pdev, const struct pci_device_id *ent); -static void carm_remove_one (struct pci_dev *pdev); -static int carm_bdev_getgeo(struct block_device *bdev, struct hd_geometry *geo); - -static const struct pci_device_id carm_pci_tbl[] = { - { PCI_VENDOR_ID_PROMISE, 0x8000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, - { PCI_VENDOR_ID_PROMISE, 0x8002, PCI_ANY_ID, PCI_ANY_ID, 0, 0, }, - { } /* terminate list */ -}; -MODULE_DEVICE_TABLE(pci, carm_pci_tbl); - -static struct pci_driver carm_driver = { - .name = DRV_NAME, - .id_table = carm_pci_tbl, - .probe = carm_init_one, - .remove = carm_remove_one, -}; - -static const struct block_device_operations carm_bd_ops = { - .owner = THIS_MODULE, - .getgeo = carm_bdev_getgeo, -}; - -static unsigned int carm_host_id; -static unsigned long carm_major_alloc; - - - -static int carm_bdev_getgeo(struct block_device *bdev, struct hd_geometry *geo) -{ - struct carm_port *port = bdev->bd_disk->private_data; - - geo->heads = (u8) port->dev_geom_head; - geo->sectors = (u8) port->dev_geom_sect; - geo->cylinders = port->dev_geom_cyl; - return 0; -} - -static const u32 msg_sizes[] = { 32, 64, 128, CARM_MSG_SIZE }; - -static inline int carm_lookup_bucket(u32 msg_size) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(msg_sizes); i++) - if (msg_size <= msg_sizes[i]) - return i; - - return -ENOENT; -} - -static void carm_init_buckets(void __iomem *mmio) -{ - unsigned int i; - - for (i = 0; i < ARRAY_SIZE(msg_sizes); i++) - writel(msg_sizes[i], mmio + CARM_CMS0 + (4 * i)); -} - -static inline void *carm_ref_msg(struct carm_host *host, - unsigned int msg_idx) -{ - return host->msg_base + (msg_idx * CARM_MSG_SIZE); -} - -static inline dma_addr_t carm_ref_msg_dma(struct carm_host *host, - unsigned int msg_idx) -{ - return host->msg_dma + (msg_idx * CARM_MSG_SIZE); -} - -static int carm_send_msg(struct carm_host *host, - struct carm_request *crq, unsigned tag) -{ - void __iomem *mmio = host->mmio; - u32 msg = (u32) carm_ref_msg_dma(host, tag); - u32 cm_bucket = crq->msg_bucket; - u32 tmp; - int rc = 0; - - VPRINTK("ENTER\n"); - - tmp = readl(mmio + CARM_HMUC); - if (tmp & CARM_Q_FULL) { -#if 0 - tmp = readl(mmio + CARM_INT_MASK); - tmp |= INT_Q_AVAILABLE; - writel(tmp, mmio + CARM_INT_MASK); - readl(mmio + CARM_INT_MASK); /* flush */ -#endif - DPRINTK("host msg queue full\n"); - rc = -EBUSY; - } else { - writel(msg | (cm_bucket << 1), mmio + CARM_IHQP); - readl(mmio + CARM_IHQP); /* flush */ - } - - return rc; -} - -static int carm_array_info (struct carm_host *host, unsigned int array_idx) -{ - struct carm_msg_ioctl *ioc; - u32 msg_data; - dma_addr_t msg_dma; - struct carm_request *crq; - struct request *rq; - int rc; - - rq = blk_mq_alloc_request(host->oob_q, REQ_OP_DRV_OUT, 0); - if (IS_ERR(rq)) { - rc = -ENOMEM; - goto err_out; - } - crq = blk_mq_rq_to_pdu(rq); - - ioc = carm_ref_msg(host, rq->tag); - msg_dma = carm_ref_msg_dma(host, rq->tag); - msg_data = (u32) (msg_dma + sizeof(struct carm_array_info)); - - crq->msg_type = CARM_MSG_ARRAY; - crq->msg_subtype = CARM_ARRAY_INFO; - rc = carm_lookup_bucket(sizeof(struct carm_msg_ioctl) + - sizeof(struct carm_array_info)); - BUG_ON(rc < 0); - crq->msg_bucket = (u32) rc; - - memset(ioc, 0, sizeof(*ioc)); - ioc->type = CARM_MSG_ARRAY; - ioc->subtype = CARM_ARRAY_INFO; - ioc->array_id = (u8) array_idx; - ioc->handle = cpu_to_le32(TAG_ENCODE(rq->tag)); - ioc->data_addr = cpu_to_le32(msg_data); - - spin_lock_irq(&host->lock); - assert(host->state == HST_DEV_SCAN_START || - host->state == HST_DEV_SCAN); - spin_unlock_irq(&host->lock); - - DPRINTK("blk_execute_rq_nowait, tag == %u\n", rq->tag); - blk_execute_rq_nowait(host->oob_q, NULL, rq, true, NULL); - - return 0; - -err_out: - spin_lock_irq(&host->lock); - host->state = HST_ERROR; - spin_unlock_irq(&host->lock); - return rc; -} - -typedef unsigned int (*carm_sspc_t)(struct carm_host *, unsigned int, void *); - -static int carm_send_special (struct carm_host *host, carm_sspc_t func) -{ - struct request *rq; - struct carm_request *crq; - struct carm_msg_ioctl *ioc; - void *mem; - unsigned int msg_size; - int rc; - - rq = blk_mq_alloc_request(host->oob_q, REQ_OP_DRV_OUT, 0); - if (IS_ERR(rq)) - return -ENOMEM; - crq = blk_mq_rq_to_pdu(rq); - - mem = carm_ref_msg(host, rq->tag); - - msg_size = func(host, rq->tag, mem); - - ioc = mem; - crq->msg_type = ioc->type; - crq->msg_subtype = ioc->subtype; - rc = carm_lookup_bucket(msg_size); - BUG_ON(rc < 0); - crq->msg_bucket = (u32) rc; - - DPRINTK("blk_execute_rq_nowait, tag == %u\n", rq->tag); - blk_execute_rq_nowait(host->oob_q, NULL, rq, true, NULL); - - return 0; -} - -static unsigned int carm_fill_sync_time(struct carm_host *host, - unsigned int idx, void *mem) -{ - struct carm_msg_sync_time *st = mem; - - time64_t tv = ktime_get_real_seconds(); - - memset(st, 0, sizeof(*st)); - st->type = CARM_MSG_MISC; - st->subtype = MISC_SET_TIME; - st->handle = cpu_to_le32(TAG_ENCODE(idx)); - st->timestamp = cpu_to_le32(tv); - - return sizeof(struct carm_msg_sync_time); -} - -static unsigned int carm_fill_alloc_buf(struct carm_host *host, - unsigned int idx, void *mem) -{ - struct carm_msg_allocbuf *ab = mem; - - memset(ab, 0, sizeof(*ab)); - ab->type = CARM_MSG_MISC; - ab->subtype = MISC_ALLOC_MEM; - ab->handle = cpu_to_le32(TAG_ENCODE(idx)); - ab->n_sg = 1; - ab->sg_type = SGT_32BIT; - ab->addr = cpu_to_le32(host->shm_dma + (PDC_SHM_SIZE >> 1)); - ab->len = cpu_to_le32(PDC_SHM_SIZE >> 1); - ab->evt_pool = cpu_to_le32(host->shm_dma + (16 * 1024)); - ab->n_evt = cpu_to_le32(1024); - ab->rbuf_pool = cpu_to_le32(host->shm_dma); - ab->n_rbuf = cpu_to_le32(RMSG_Q_LEN); - ab->msg_pool = cpu_to_le32(host->shm_dma + RBUF_LEN); - ab->n_msg = cpu_to_le32(CARM_Q_LEN); - ab->sg[0].start = cpu_to_le32(host->shm_dma + (PDC_SHM_SIZE >> 1)); - ab->sg[0].len = cpu_to_le32(65536); - - return sizeof(struct carm_msg_allocbuf); -} - -static unsigned int carm_fill_scan_channels(struct carm_host *host, - unsigned int idx, void *mem) -{ - struct carm_msg_ioctl *ioc = mem; - u32 msg_data = (u32) (carm_ref_msg_dma(host, idx) + - IOC_SCAN_CHAN_OFFSET); - - memset(ioc, 0, sizeof(*ioc)); - ioc->type = CARM_MSG_IOCTL; - ioc->subtype = CARM_IOC_SCAN_CHAN; - ioc->handle = cpu_to_le32(TAG_ENCODE(idx)); - ioc->data_addr = cpu_to_le32(msg_data); - - /* fill output data area with "no device" default values */ - mem += IOC_SCAN_CHAN_OFFSET; - memset(mem, IOC_SCAN_CHAN_NODEV, CARM_MAX_PORTS); - - return IOC_SCAN_CHAN_OFFSET + CARM_MAX_PORTS; -} - -static unsigned int carm_fill_get_fw_ver(struct carm_host *host, - unsigned int idx, void *mem) -{ - struct carm_msg_get_fw_ver *ioc = mem; - u32 msg_data = (u32) (carm_ref_msg_dma(host, idx) + sizeof(*ioc)); - - memset(ioc, 0, sizeof(*ioc)); - ioc->type = CARM_MSG_MISC; - ioc->subtype = MISC_GET_FW_VER; - ioc->handle = cpu_to_le32(TAG_ENCODE(idx)); - ioc->data_addr = cpu_to_le32(msg_data); - - return sizeof(struct carm_msg_get_fw_ver) + - sizeof(struct carm_fw_ver); -} - -static inline void carm_push_q (struct carm_host *host, struct request_queue *q) -{ - unsigned int idx = host->wait_q_prod % CARM_MAX_WAIT_Q; - - blk_mq_stop_hw_queues(q); - VPRINTK("STOPPED QUEUE %p\n", q); - - host->wait_q[idx] = q; - host->wait_q_prod++; - BUG_ON(host->wait_q_prod == host->wait_q_cons); /* overrun */ -} - -static inline struct request_queue *carm_pop_q(struct carm_host *host) -{ - unsigned int idx; - - if (host->wait_q_prod == host->wait_q_cons) - return NULL; - - idx = host->wait_q_cons % CARM_MAX_WAIT_Q; - host->wait_q_cons++; - - return host->wait_q[idx]; -} - -static inline void carm_round_robin(struct carm_host *host) -{ - struct request_queue *q = carm_pop_q(host); - if (q) { - blk_mq_start_hw_queues(q); - VPRINTK("STARTED QUEUE %p\n", q); - } -} - -static inline enum dma_data_direction carm_rq_dir(struct request *rq) -{ - return op_is_write(req_op(rq)) ? DMA_TO_DEVICE : DMA_FROM_DEVICE; -} - -static blk_status_t carm_queue_rq(struct blk_mq_hw_ctx *hctx, - const struct blk_mq_queue_data *bd) -{ - struct request_queue *q = hctx->queue; - struct request *rq = bd->rq; - struct carm_port *port = q->queuedata; - struct carm_host *host = port->host; - struct carm_request *crq = blk_mq_rq_to_pdu(rq); - struct carm_msg_rw *msg; - struct scatterlist *sg; - int i, n_elem = 0, rc; - unsigned int msg_size; - u32 tmp; - - crq->n_elem = 0; - sg_init_table(crq->sg, CARM_MAX_REQ_SG); - - blk_mq_start_request(rq); - - spin_lock_irq(&host->lock); - if (req_op(rq) == REQ_OP_DRV_OUT) - goto send_msg; - - /* get scatterlist from block layer */ - sg = &crq->sg[0]; - n_elem = blk_rq_map_sg(q, rq, sg); - if (n_elem <= 0) - goto out_ioerr; - - /* map scatterlist to PCI bus addresses */ - n_elem = dma_map_sg(&host->pdev->dev, sg, n_elem, carm_rq_dir(rq)); - if (n_elem <= 0) - goto out_ioerr; - - /* obey global hardware limit on S/G entries */ - if (host->hw_sg_used >= CARM_MAX_HOST_SG - n_elem) - goto out_resource; - - crq->n_elem = n_elem; - host->hw_sg_used += n_elem; - - /* - * build read/write message - */ - - VPRINTK("build msg\n"); - msg = (struct carm_msg_rw *) carm_ref_msg(host, rq->tag); - - if (rq_data_dir(rq) == WRITE) { - msg->type = CARM_MSG_WRITE; - crq->msg_type = CARM_MSG_WRITE; - } else { - msg->type = CARM_MSG_READ; - crq->msg_type = CARM_MSG_READ; - } - - msg->id = port->port_no; - msg->sg_count = n_elem; - msg->sg_type = SGT_32BIT; - msg->handle = cpu_to_le32(TAG_ENCODE(rq->tag)); - msg->lba = cpu_to_le32(blk_rq_pos(rq) & 0xffffffff); - tmp = (blk_rq_pos(rq) >> 16) >> 16; - msg->lba_high = cpu_to_le16( (u16) tmp ); - msg->lba_count = cpu_to_le16(blk_rq_sectors(rq)); - - msg_size = sizeof(struct carm_msg_rw) - sizeof(msg->sg); - for (i = 0; i < n_elem; i++) { - struct carm_msg_sg *carm_sg = &msg->sg[i]; - carm_sg->start = cpu_to_le32(sg_dma_address(&crq->sg[i])); - carm_sg->len = cpu_to_le32(sg_dma_len(&crq->sg[i])); - msg_size += sizeof(struct carm_msg_sg); - } - - rc = carm_lookup_bucket(msg_size); - BUG_ON(rc < 0); - crq->msg_bucket = (u32) rc; -send_msg: - /* - * queue read/write message to hardware - */ - VPRINTK("send msg, tag == %u\n", rq->tag); - rc = carm_send_msg(host, crq, rq->tag); - if (rc) { - host->hw_sg_used -= n_elem; - goto out_resource; - } - - spin_unlock_irq(&host->lock); - return BLK_STS_OK; -out_resource: - dma_unmap_sg(&host->pdev->dev, &crq->sg[0], n_elem, carm_rq_dir(rq)); - carm_push_q(host, q); - spin_unlock_irq(&host->lock); - return BLK_STS_DEV_RESOURCE; -out_ioerr: - carm_round_robin(host); - spin_unlock_irq(&host->lock); - return BLK_STS_IOERR; -} - -static void carm_handle_array_info(struct carm_host *host, - struct carm_request *crq, u8 *mem, - blk_status_t error) -{ - struct carm_port *port; - u8 *msg_data = mem + sizeof(struct carm_array_info); - struct carm_array_info *desc = (struct carm_array_info *) msg_data; - u64 lo, hi; - int cur_port; - size_t slen; - - DPRINTK("ENTER\n"); - - if (error) - goto out; - if (le32_to_cpu(desc->array_status) & ARRAY_NO_EXIST) - goto out; - - cur_port = host->cur_scan_dev; - - /* should never occur */ - if ((cur_port < 0) || (cur_port >= CARM_MAX_PORTS)) { - printk(KERN_ERR PFX "BUG: cur_scan_dev==%d, array_id==%d\n", - cur_port, (int) desc->array_id); - goto out; - } - - port = &host->port[cur_port]; - - lo = (u64) le32_to_cpu(desc->size); - hi = (u64) le16_to_cpu(desc->size_hi); - - port->capacity = lo | (hi << 32); - port->dev_geom_head = le16_to_cpu(desc->head); - port->dev_geom_sect = le16_to_cpu(desc->sect); - port->dev_geom_cyl = le16_to_cpu(desc->cyl); - - host->dev_active |= (1 << cur_port); - - strncpy(port->name, desc->name, sizeof(port->name)); - port->name[sizeof(port->name) - 1] = 0; - slen = strlen(port->name); - while (slen && (port->name[slen - 1] == ' ')) { - port->name[slen - 1] = 0; - slen--; - } - - printk(KERN_INFO DRV_NAME "(%s): port %u device %Lu sectors\n", - pci_name(host->pdev), port->port_no, - (unsigned long long) port->capacity); - printk(KERN_INFO DRV_NAME "(%s): port %u device "%s"\n", - pci_name(host->pdev), port->port_no, port->name); - -out: - assert(host->state == HST_DEV_SCAN); - schedule_work(&host->fsm_task); -} - -static void carm_handle_scan_chan(struct carm_host *host, - struct carm_request *crq, u8 *mem, - blk_status_t error) -{ - u8 *msg_data = mem + IOC_SCAN_CHAN_OFFSET; - unsigned int i, dev_count = 0; - int new_state = HST_DEV_SCAN_START; - - DPRINTK("ENTER\n"); - - if (error) { - new_state = HST_ERROR; - goto out; - } - - /* TODO: scan and support non-disk devices */ - for (i = 0; i < 8; i++) - if (msg_data[i] == 0) { /* direct-access device (disk) */ - host->dev_present |= (1 << i); - dev_count++; - } - - printk(KERN_INFO DRV_NAME "(%s): found %u interesting devices\n", - pci_name(host->pdev), dev_count); - -out: - assert(host->state == HST_PORT_SCAN); - host->state = new_state; - schedule_work(&host->fsm_task); -} - -static void carm_handle_generic(struct carm_host *host, - struct carm_request *crq, blk_status_t error, - int cur_state, int next_state) -{ - DPRINTK("ENTER\n"); - - assert(host->state == cur_state); - if (error) - host->state = HST_ERROR; - else - host->state = next_state; - schedule_work(&host->fsm_task); -} - -static inline void carm_handle_resp(struct carm_host *host, - __le32 ret_handle_le, u32 status) -{ - u32 handle = le32_to_cpu(ret_handle_le); - unsigned int msg_idx; - struct request *rq; - struct carm_request *crq; - blk_status_t error = (status == RMSG_OK) ? 0 : BLK_STS_IOERR; - u8 *mem; - - VPRINTK("ENTER, handle == 0x%x\n", handle); - - if (unlikely(!TAG_VALID(handle))) { - printk(KERN_ERR DRV_NAME "(%s): BUG: invalid tag 0x%x\n", - pci_name(host->pdev), handle); - return; - } - - msg_idx = TAG_DECODE(handle); - VPRINTK("tag == %u\n", msg_idx); - - rq = blk_mq_tag_to_rq(host->tag_set.tags[0], msg_idx); - crq = blk_mq_rq_to_pdu(rq); - - /* fast path */ - if (likely(crq->msg_type == CARM_MSG_READ || - crq->msg_type == CARM_MSG_WRITE)) { - dma_unmap_sg(&host->pdev->dev, &crq->sg[0], crq->n_elem, - carm_rq_dir(rq)); - goto done; - } - - mem = carm_ref_msg(host, msg_idx); - - switch (crq->msg_type) { - case CARM_MSG_IOCTL: { - switch (crq->msg_subtype) { - case CARM_IOC_SCAN_CHAN: - carm_handle_scan_chan(host, crq, mem, error); - goto done; - default: - /* unknown / invalid response */ - goto err_out; - } - break; - } - - case CARM_MSG_MISC: { - switch (crq->msg_subtype) { - case MISC_ALLOC_MEM: - carm_handle_generic(host, crq, error, - HST_ALLOC_BUF, HST_SYNC_TIME); - goto done; - case MISC_SET_TIME: - carm_handle_generic(host, crq, error, - HST_SYNC_TIME, HST_GET_FW_VER); - goto done; - case MISC_GET_FW_VER: { - struct carm_fw_ver *ver = (struct carm_fw_ver *) - (mem + sizeof(struct carm_msg_get_fw_ver)); - if (!error) { - host->fw_ver = le32_to_cpu(ver->version); - host->flags |= (ver->features & FL_FW_VER_MASK); - } - carm_handle_generic(host, crq, error, - HST_GET_FW_VER, HST_PORT_SCAN); - goto done; - } - default: - /* unknown / invalid response */ - goto err_out; - } - break; - } - - case CARM_MSG_ARRAY: { - switch (crq->msg_subtype) { - case CARM_ARRAY_INFO: - carm_handle_array_info(host, crq, mem, error); - break; - default: - /* unknown / invalid response */ - goto err_out; - } - break; - } - - default: - /* unknown / invalid response */ - goto err_out; - } - - return; - -err_out: - printk(KERN_WARNING DRV_NAME "(%s): BUG: unhandled message type %d/%d\n", - pci_name(host->pdev), crq->msg_type, crq->msg_subtype); - error = BLK_STS_IOERR; -done: - host->hw_sg_used -= crq->n_elem; - blk_mq_end_request(blk_mq_rq_from_pdu(crq), error); - - if (host->hw_sg_used <= CARM_SG_LOW_WATER) - carm_round_robin(host); -} - -static inline void carm_handle_responses(struct carm_host *host) -{ - void __iomem *mmio = host->mmio; - struct carm_response *resp = (struct carm_response *) host->shm; - unsigned int work = 0; - unsigned int idx = host->resp_idx % RMSG_Q_LEN; - - while (1) { - u32 status = le32_to_cpu(resp[idx].status); - - if (status == 0xffffffff) { - VPRINTK("ending response on index %u\n", idx); - writel(idx << 3, mmio + CARM_RESP_IDX); - break; - } - - /* response to a message we sent */ - else if ((status & (1 << 31)) == 0) { - VPRINTK("handling msg response on index %u\n", idx); - carm_handle_resp(host, resp[idx].ret_handle, status); - resp[idx].status = cpu_to_le32(0xffffffff); - } - - /* asynchronous events the hardware throws our way */ - else if ((status & 0xff000000) == (1 << 31)) { - u8 *evt_type_ptr = (u8 *) &resp[idx]; - u8 evt_type = *evt_type_ptr; - printk(KERN_WARNING DRV_NAME "(%s): unhandled event type %d\n", - pci_name(host->pdev), (int) evt_type); - resp[idx].status = cpu_to_le32(0xffffffff); - } - - idx = NEXT_RESP(idx); - work++; - } - - VPRINTK("EXIT, work==%u\n", work); - host->resp_idx += work; -} - -static irqreturn_t carm_interrupt(int irq, void *__host) -{ - struct carm_host *host = __host; - void __iomem *mmio; - u32 mask; - int handled = 0; - unsigned long flags; - - if (!host) { - VPRINTK("no host\n"); - return IRQ_NONE; - } - - spin_lock_irqsave(&host->lock, flags); - - mmio = host->mmio; - - /* reading should also clear interrupts */ - mask = readl(mmio + CARM_INT_STAT); - - if (mask == 0 || mask == 0xffffffff) { - VPRINTK("no work, mask == 0x%x\n", mask); - goto out; - } - - if (mask & INT_ACK_MASK) - writel(mask, mmio + CARM_INT_STAT); - - if (unlikely(host->state == HST_INVALID)) { - VPRINTK("not initialized yet, mask = 0x%x\n", mask); - goto out; - } - - if (mask & CARM_HAVE_RESP) { - handled = 1; - carm_handle_responses(host); - } - -out: - spin_unlock_irqrestore(&host->lock, flags); - VPRINTK("EXIT\n"); - return IRQ_RETVAL(handled); -} - -static void carm_fsm_task (struct work_struct *work) -{ - struct carm_host *host = - container_of(work, struct carm_host, fsm_task); - unsigned long flags; - unsigned int state; - int rc, i, next_dev; - int reschedule = 0; - int new_state = HST_INVALID; - - spin_lock_irqsave(&host->lock, flags); - state = host->state; - spin_unlock_irqrestore(&host->lock, flags); - - DPRINTK("ENTER, state == %s\n", state_name[state]); - - switch (state) { - case HST_PROBE_START: - new_state = HST_ALLOC_BUF; - reschedule = 1; - break; - - case HST_ALLOC_BUF: - rc = carm_send_special(host, carm_fill_alloc_buf); - if (rc) { - new_state = HST_ERROR; - reschedule = 1; - } - break; - - case HST_SYNC_TIME: - rc = carm_send_special(host, carm_fill_sync_time); - if (rc) { - new_state = HST_ERROR; - reschedule = 1; - } - break; - - case HST_GET_FW_VER: - rc = carm_send_special(host, carm_fill_get_fw_ver); - if (rc) { - new_state = HST_ERROR; - reschedule = 1; - } - break; - - case HST_PORT_SCAN: - rc = carm_send_special(host, carm_fill_scan_channels); - if (rc) { - new_state = HST_ERROR; - reschedule = 1; - } - break; - - case HST_DEV_SCAN_START: - host->cur_scan_dev = -1; - new_state = HST_DEV_SCAN; - reschedule = 1; - break; - - case HST_DEV_SCAN: - next_dev = -1; - for (i = host->cur_scan_dev + 1; i < CARM_MAX_PORTS; i++) - if (host->dev_present & (1 << i)) { - next_dev = i; - break; - } - - if (next_dev >= 0) { - host->cur_scan_dev = next_dev; - rc = carm_array_info(host, next_dev); - if (rc) { - new_state = HST_ERROR; - reschedule = 1; - } - } else { - new_state = HST_DEV_ACTIVATE; - reschedule = 1; - } - break; - - case HST_DEV_ACTIVATE: { - int activated = 0; - for (i = 0; i < CARM_MAX_PORTS; i++) - if (host->dev_active & (1 << i)) { - struct carm_port *port = &host->port[i]; - struct gendisk *disk = port->disk; - - set_capacity(disk, port->capacity); - add_disk(disk); - activated++; - } - - printk(KERN_INFO DRV_NAME "(%s): %d ports activated\n", - pci_name(host->pdev), activated); - - new_state = HST_PROBE_FINISHED; - reschedule = 1; - break; - } - - case HST_PROBE_FINISHED: - complete(&host->probe_comp); - break; - - case HST_ERROR: - /* FIXME: TODO */ - break; - - default: - /* should never occur */ - printk(KERN_ERR PFX "BUG: unknown state %d\n", state); - assert(0); - break; - } - - if (new_state != HST_INVALID) { - spin_lock_irqsave(&host->lock, flags); - host->state = new_state; - spin_unlock_irqrestore(&host->lock, flags); - } - if (reschedule) - schedule_work(&host->fsm_task); -} - -static int carm_init_wait(void __iomem *mmio, u32 bits, unsigned int test_bit) -{ - unsigned int i; - - for (i = 0; i < 50000; i++) { - u32 tmp = readl(mmio + CARM_LMUC); - udelay(100); - - if (test_bit) { - if ((tmp & bits) == bits) - return 0; - } else { - if ((tmp & bits) == 0) - return 0; - } - - cond_resched(); - } - - printk(KERN_ERR PFX "carm_init_wait timeout, bits == 0x%x, test_bit == %s\n", - bits, test_bit ? "yes" : "no"); - return -EBUSY; -} - -static void carm_init_responses(struct carm_host *host) -{ - void __iomem *mmio = host->mmio; - unsigned int i; - struct carm_response *resp = (struct carm_response *) host->shm; - - for (i = 0; i < RMSG_Q_LEN; i++) - resp[i].status = cpu_to_le32(0xffffffff); - - writel(0, mmio + CARM_RESP_IDX); -} - -static int carm_init_host(struct carm_host *host) -{ - void __iomem *mmio = host->mmio; - u32 tmp; - u8 tmp8; - int rc; - - DPRINTK("ENTER\n"); - - writel(0, mmio + CARM_INT_MASK); - - tmp8 = readb(mmio + CARM_INITC); - if (tmp8 & 0x01) { - tmp8 &= ~0x01; - writeb(tmp8, mmio + CARM_INITC); - readb(mmio + CARM_INITC); /* flush */ - - DPRINTK("snooze...\n"); - msleep(5000); - } - - tmp = readl(mmio + CARM_HMUC); - if (tmp & CARM_CME) { - DPRINTK("CME bit present, waiting\n"); - rc = carm_init_wait(mmio, CARM_CME, 1); - if (rc) { - DPRINTK("EXIT, carm_init_wait 1 failed\n"); - return rc; - } - } - if (tmp & CARM_RME) { - DPRINTK("RME bit present, waiting\n"); - rc = carm_init_wait(mmio, CARM_RME, 1); - if (rc) { - DPRINTK("EXIT, carm_init_wait 2 failed\n"); - return rc; - } - } - - tmp &= ~(CARM_RME | CARM_CME); - writel(tmp, mmio + CARM_HMUC); - readl(mmio + CARM_HMUC); /* flush */ - - rc = carm_init_wait(mmio, CARM_RME | CARM_CME, 0); - if (rc) { - DPRINTK("EXIT, carm_init_wait 3 failed\n"); - return rc; - } - - carm_init_buckets(mmio); - - writel(host->shm_dma & 0xffffffff, mmio + RBUF_ADDR_LO); - writel((host->shm_dma >> 16) >> 16, mmio + RBUF_ADDR_HI); - writel(RBUF_LEN, mmio + RBUF_BYTE_SZ); - - tmp = readl(mmio + CARM_HMUC); - tmp |= (CARM_RME | CARM_CME | CARM_WZBC); - writel(tmp, mmio + CARM_HMUC); - readl(mmio + CARM_HMUC); /* flush */ - - rc = carm_init_wait(mmio, CARM_RME | CARM_CME, 1); - if (rc) { - DPRINTK("EXIT, carm_init_wait 4 failed\n"); - return rc; - } - - writel(0, mmio + CARM_HMPHA); - writel(INT_DEF_MASK, mmio + CARM_INT_MASK); - - carm_init_responses(host); - - /* start initialization, probing state machine */ - spin_lock_irq(&host->lock); - assert(host->state == HST_INVALID); - host->state = HST_PROBE_START; - spin_unlock_irq(&host->lock); - schedule_work(&host->fsm_task); - - DPRINTK("EXIT\n"); - return 0; -} - -static const struct blk_mq_ops carm_mq_ops = { - .queue_rq = carm_queue_rq, -}; - -static int carm_init_disk(struct carm_host *host, unsigned int port_no) -{ - struct carm_port *port = &host->port[port_no]; - struct gendisk *disk; - struct request_queue *q; - - port->host = host; - port->port_no = port_no; - - disk = alloc_disk(CARM_MINORS_PER_MAJOR); - if (!disk) - return -ENOMEM; - - port->disk = disk; - sprintf(disk->disk_name, DRV_NAME "/%u", - (unsigned int)host->id * CARM_MAX_PORTS + port_no); - disk->major = host->major; - disk->first_minor = port_no * CARM_MINORS_PER_MAJOR; - disk->fops = &carm_bd_ops; - disk->private_data = port; - - q = blk_mq_init_queue(&host->tag_set); - if (IS_ERR(q)) - return PTR_ERR(q); - - blk_queue_max_segments(q, CARM_MAX_REQ_SG); - blk_queue_segment_boundary(q, CARM_SG_BOUNDARY); - - q->queuedata = port; - disk->queue = q; - return 0; -} - -static void carm_free_disk(struct carm_host *host, unsigned int port_no) -{ - struct carm_port *port = &host->port[port_no]; - struct gendisk *disk = port->disk; - - if (!disk) - return; - - if (disk->flags & GENHD_FL_UP) - del_gendisk(disk); - if (disk->queue) - blk_cleanup_queue(disk->queue); - put_disk(disk); -} - -static int carm_init_shm(struct carm_host *host) -{ - host->shm = dma_alloc_coherent(&host->pdev->dev, CARM_SHM_SIZE, - &host->shm_dma, GFP_KERNEL); - if (!host->shm) - return -ENOMEM; - - host->msg_base = host->shm + RBUF_LEN; - host->msg_dma = host->shm_dma + RBUF_LEN; - - memset(host->shm, 0xff, RBUF_LEN); - memset(host->msg_base, 0, PDC_SHM_SIZE - RBUF_LEN); - - return 0; -} - -static int carm_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) -{ - struct carm_host *host; - int rc; - struct request_queue *q; - unsigned int i; - - printk_once(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n"); - - rc = pci_enable_device(pdev); - if (rc) - return rc; - - rc = pci_request_regions(pdev, DRV_NAME); - if (rc) - goto err_out; - - rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); - if (rc) { - printk(KERN_ERR DRV_NAME "(%s): DMA mask failure\n", - pci_name(pdev)); - goto err_out_regions; - } - - host = kzalloc(sizeof(*host), GFP_KERNEL); - if (!host) { - printk(KERN_ERR DRV_NAME "(%s): memory alloc failure\n", - pci_name(pdev)); - rc = -ENOMEM; - goto err_out_regions; - } - - host->pdev = pdev; - spin_lock_init(&host->lock); - INIT_WORK(&host->fsm_task, carm_fsm_task); - init_completion(&host->probe_comp); - - host->mmio = ioremap(pci_resource_start(pdev, 0), - pci_resource_len(pdev, 0)); - if (!host->mmio) { - printk(KERN_ERR DRV_NAME "(%s): MMIO alloc failure\n", - pci_name(pdev)); - rc = -ENOMEM; - goto err_out_kfree; - } - - rc = carm_init_shm(host); - if (rc) { - printk(KERN_ERR DRV_NAME "(%s): DMA SHM alloc failure\n", - pci_name(pdev)); - goto err_out_iounmap; - } - - memset(&host->tag_set, 0, sizeof(host->tag_set)); - host->tag_set.ops = &carm_mq_ops; - host->tag_set.cmd_size = sizeof(struct carm_request); - host->tag_set.nr_hw_queues = 1; - host->tag_set.nr_maps = 1; - host->tag_set.queue_depth = max_queue; - host->tag_set.numa_node = NUMA_NO_NODE; - host->tag_set.flags = BLK_MQ_F_SHOULD_MERGE; - - rc = blk_mq_alloc_tag_set(&host->tag_set); - if (rc) - goto err_out_dma_free; - - q = blk_mq_init_queue(&host->tag_set); - if (IS_ERR(q)) { - rc = PTR_ERR(q); - blk_mq_free_tag_set(&host->tag_set); - goto err_out_dma_free; - } - - host->oob_q = q; - q->queuedata = host; - - /* - * Figure out which major to use: 160, 161, or dynamic - */ - if (!test_and_set_bit(0, &carm_major_alloc)) - host->major = 160; - else if (!test_and_set_bit(1, &carm_major_alloc)) - host->major = 161; - else - host->flags |= FL_DYN_MAJOR; - - host->id = carm_host_id; - sprintf(host->name, DRV_NAME "%d", carm_host_id); - - rc = register_blkdev(host->major, host->name); - if (rc < 0) - goto err_out_free_majors; - if (host->flags & FL_DYN_MAJOR) - host->major = rc; - - for (i = 0; i < CARM_MAX_PORTS; i++) { - rc = carm_init_disk(host, i); - if (rc) - goto err_out_blkdev_disks; - } - - pci_set_master(pdev); - - rc = request_irq(pdev->irq, carm_interrupt, IRQF_SHARED, DRV_NAME, host); - if (rc) { - printk(KERN_ERR DRV_NAME "(%s): irq alloc failure\n", - pci_name(pdev)); - goto err_out_blkdev_disks; - } - - rc = carm_init_host(host); - if (rc) - goto err_out_free_irq; - - DPRINTK("waiting for probe_comp\n"); - wait_for_completion(&host->probe_comp); - - printk(KERN_INFO "%s: pci %s, ports %d, io %llx, irq %u, major %d\n", - host->name, pci_name(pdev), (int) CARM_MAX_PORTS, - (unsigned long long)pci_resource_start(pdev, 0), - pdev->irq, host->major); - - carm_host_id++; - pci_set_drvdata(pdev, host); - return 0; - -err_out_free_irq: - free_irq(pdev->irq, host); -err_out_blkdev_disks: - for (i = 0; i < CARM_MAX_PORTS; i++) - carm_free_disk(host, i); - unregister_blkdev(host->major, host->name); -err_out_free_majors: - if (host->major == 160) - clear_bit(0, &carm_major_alloc); - else if (host->major == 161) - clear_bit(1, &carm_major_alloc); - blk_cleanup_queue(host->oob_q); - blk_mq_free_tag_set(&host->tag_set); -err_out_dma_free: - dma_free_coherent(&pdev->dev, CARM_SHM_SIZE, host->shm, host->shm_dma); -err_out_iounmap: - iounmap(host->mmio); -err_out_kfree: - kfree(host); -err_out_regions: - pci_release_regions(pdev); -err_out: - pci_disable_device(pdev); - return rc; -} - -static void carm_remove_one (struct pci_dev *pdev) -{ - struct carm_host *host = pci_get_drvdata(pdev); - unsigned int i; - - if (!host) { - printk(KERN_ERR PFX "BUG: no host data for PCI(%s)\n", - pci_name(pdev)); - return; - } - - free_irq(pdev->irq, host); - for (i = 0; i < CARM_MAX_PORTS; i++) - carm_free_disk(host, i); - unregister_blkdev(host->major, host->name); - if (host->major == 160) - clear_bit(0, &carm_major_alloc); - else if (host->major == 161) - clear_bit(1, &carm_major_alloc); - blk_cleanup_queue(host->oob_q); - blk_mq_free_tag_set(&host->tag_set); - dma_free_coherent(&pdev->dev, CARM_SHM_SIZE, host->shm, host->shm_dma); - iounmap(host->mmio); - kfree(host); - pci_release_regions(pdev); - pci_disable_device(pdev); -} - -module_pci_driver(carm_driver);
From: Jiri Slaby (SUSE) jirislaby@kernel.org
commit 777fa87c7682228e155cf0892ba61cb2ab1fe3ae upstream.
Both bond_alb_xmit() and bond_tlb_xmit() produce a valid warning with gcc-13: drivers/net/bonding/bond_alb.c:1409:13: error: conflicting types for 'bond_tlb_xmit' due to enum/integer mismatch; have 'netdev_tx_t(struct sk_buff *, struct net_device *)' ... include/net/bond_alb.h:160:5: note: previous declaration of 'bond_tlb_xmit' with type 'int(struct sk_buff *, struct net_device *)'
drivers/net/bonding/bond_alb.c:1523:13: error: conflicting types for 'bond_alb_xmit' due to enum/integer mismatch; have 'netdev_tx_t(struct sk_buff *, struct net_device *)' ... include/net/bond_alb.h:159:5: note: previous declaration of 'bond_alb_xmit' with type 'int(struct sk_buff *, struct net_device *)'
I.e. the return type of the declaration is int, while the definitions spell netdev_tx_t. Synchronize both of them to the latter.
Cc: Martin Liska mliska@suse.cz Cc: Jay Vosburgh j.vosburgh@gmail.com Cc: Veaceslav Falico vfalico@gmail.com Cc: Andy Gospodarek andy@greyhouse.net Signed-off-by: Jiri Slaby (SUSE) jirislaby@kernel.org Link: https://lore.kernel.org/r/20221031114409.10417-1-jirislaby@kernel.org Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- include/net/bond_alb.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
--- a/include/net/bond_alb.h +++ b/include/net/bond_alb.h @@ -156,8 +156,8 @@ int bond_alb_init_slave(struct bonding * void bond_alb_deinit_slave(struct bonding *bond, struct slave *slave); void bond_alb_handle_link_change(struct bonding *bond, struct slave *slave, char link); void bond_alb_handle_active_change(struct bonding *bond, struct slave *new_slave); -int bond_alb_xmit(struct sk_buff *skb, struct net_device *bond_dev); -int bond_tlb_xmit(struct sk_buff *skb, struct net_device *bond_dev); +netdev_tx_t bond_alb_xmit(struct sk_buff *skb, struct net_device *bond_dev); +netdev_tx_t bond_tlb_xmit(struct sk_buff *skb, struct net_device *bond_dev); struct slave *bond_xmit_alb_slave_get(struct bonding *bond, struct sk_buff *skb); struct slave *bond_xmit_tlb_slave_get(struct bonding *bond,
From: Qilin Tan qilin.tan@mediatek.com
commit 144f1cd40bf91fb3ac1d41806470756ce774f389 upstream.
Made iostat lock irq safe to avoid potentinal deadlock.
Deadlock scenario: f2fs_attr_store -> f2fs_sbi_store -> _sbi_store -> spin_lock(sbi->iostat_lock) <interrupt request> -> scsi_end_request -> bio_endio -> f2fs_dio_read_end_io -> f2fs_update_iostat -> spin_lock_irqsave(sbi->iostat_lock) ===> Dead lock here
Fixes: 61803e984307 ("f2fs: fix iostat related lock protection") Fixes: a1e09b03e6f5 ("f2fs: use iomap for direct I/O") Signed-off-by: Qilin Tan qilin.tan@mediatek.com Reviewed-by: Chao Yu chao@kernel.org Signed-off-by: Jaegeuk Kim jaegeuk@kernel.org Cc: Daniel Rosenberg drosen@google.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/f2fs/sysfs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
--- a/fs/f2fs/sysfs.c +++ b/fs/f2fs/sysfs.c @@ -403,9 +403,9 @@ out: if (!strcmp(a->attr.name, "iostat_period_ms")) { if (t < MIN_IOSTAT_PERIOD_MS || t > MAX_IOSTAT_PERIOD_MS) return -EINVAL; - spin_lock(&sbi->iostat_lock); + spin_lock_irq(&sbi->iostat_lock); sbi->iostat_period_ms = (unsigned int)t; - spin_unlock(&sbi->iostat_lock); + spin_unlock_irq(&sbi->iostat_lock); return count; }
From: Arnd Bergmann arnd@arndb.de
commit 5f2779dfa7b8cc7dfd4a1b6586d86e0d193266f3 upstream.
The behavior of 'enum' types has changed in gcc-13, so now the UNBUSY_THR_PCT constant is interpreted as a 64-bit number because it is defined as part of the same enum definition as some other constants that do not fit within a 32-bit integer. This in turn leads to some inefficient code on 32-bit architectures as well as a link error:
arm-linux-gnueabi/bin/arm-linux-gnueabi-ld: block/blk-iocost.o: in function `ioc_timer_fn': blk-iocost.c:(.text+0x68e8): undefined reference to `__aeabi_uldivmod' arm-linux-gnueabi-ld: blk-iocost.c:(.text+0x6908): undefined reference to `__aeabi_uldivmod'
Split the enum definition to keep the 64-bit timing constants in a separate enum type from those constants that can clearly fit within a smaller type.
Signed-off-by: Arnd Bergmann arnd@arndb.de Acked-by: Tejun Heo tj@kernel.org Link: https://lore.kernel.org/r/20230118080706.3303186-1-arnd@kernel.org Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- block/blk-iocost.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
--- a/block/blk-iocost.c +++ b/block/blk-iocost.c @@ -256,6 +256,11 @@ enum { VRATE_MIN = VTIME_PER_USEC * VRATE_MIN_PPM / MILLION, VRATE_CLAMP_ADJ_PCT = 4,
+ /* switch iff the conditions are met for longer than this */ + AUTOP_CYCLE_NSEC = 10LLU * NSEC_PER_SEC, +}; + +enum { /* if IOs end up waiting for requests, issue less */ RQ_WAIT_BUSY_PCT = 5,
@@ -294,9 +299,6 @@ enum { /* don't let cmds which take a very long time pin lagging for too long */ MAX_LAGGING_PERIODS = 10,
- /* switch iff the conditions are met for longer than this */ - AUTOP_CYCLE_NSEC = 10LLU * NSEC_PER_SEC, - /* * Count IO size in 4k pages. The 12bit shift helps keeping * size-proportional components of cost calculation in closer
From: Jiri Slaby (SUSE) jirislaby@kernel.org
commit ff1cc97b1f4c10db224f276d9615b22835b8c424 upstream.
Since gcc13, each member of an enum has the same type as the enum [1]. And that is inherited from its members. Provided: VTIME_PER_SEC_SHIFT = 37, VTIME_PER_SEC = 1LLU << VTIME_PER_SEC_SHIFT, ... AUTOP_CYCLE_NSEC = 10LLU * NSEC_PER_SEC, the named type is unsigned long.
This generates warnings with gcc-13: block/blk-iocost.c: In function 'ioc_weight_prfill': block/blk-iocost.c:3037:37: error: format '%u' expects argument of type 'unsigned int', but argument 4 has type 'long unsigned int'
block/blk-iocost.c: In function 'ioc_weight_show': block/blk-iocost.c:3047:34: error: format '%u' expects argument of type 'unsigned int', but argument 3 has type 'long unsigned int'
So split the anonymous enum with large values to a separate enum, so that they don't affect other members.
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=36113
Cc: Martin Liska mliska@suse.cz Cc: Tejun Heo tj@kernel.org Cc: Josef Bacik josef@toxicpanda.com Cc: Jens Axboe axboe@kernel.dk Cc: cgroups@vger.kernel.org Cc: linux-block@vger.kernel.org Signed-off-by: Jiri Slaby (SUSE) jirislaby@kernel.org Link: https://lore.kernel.org/r/20221213120826.17446-1-jirislaby@kernel.org Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- block/blk-iocost.c | 2 ++ 1 file changed, 2 insertions(+)
--- a/block/blk-iocost.c +++ b/block/blk-iocost.c @@ -232,7 +232,9 @@ enum {
/* 1/64k is granular enough and can easily be handled w/ u32 */ WEIGHT_ONE = 1 << 16, +};
+enum { /* * As vtime is used to calculate the cost of each IO, it needs to * be fairly high precision. For example, it should be able to
Not upstream as this function is no longer around anymore.
The function i40iw_manage_apbvt() has the wrong prototype match from the .h file to the .c declaration, so fix it up, otherwise gcc-13 complains (rightfully) that the type is incorrect.
Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/infiniband/hw/i40iw/i40iw.h | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
--- a/drivers/infiniband/hw/i40iw/i40iw.h +++ b/drivers/infiniband/hw/i40iw/i40iw.h @@ -422,9 +422,8 @@ void i40iw_manage_arp_cache(struct i40iw bool ipv4, u32 action);
-int i40iw_manage_apbvt(struct i40iw_device *iwdev, - u16 accel_local_port, - bool add_port); +enum i40iw_status_code i40iw_manage_apbvt(struct i40iw_device *iwdev, + u16 accel_local_port, bool add_port);
struct i40iw_cqp_request *i40iw_get_cqp_request(struct i40iw_cqp *cqp, bool wait); void i40iw_free_cqp_request(struct i40iw_cqp *cqp, struct i40iw_cqp_request *cqp_request);
Not upstream as it was fixed in a much larger api change in newer kernels.
gcc-13 rightfully complains that enum is not the same as an int, so fix up the function prototypes in i40e_alloc.h to be correct, solving a bunch of build warnings.
Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/intel/i40e/i40e_alloc.h | 17 ++++++----------- 1 file changed, 6 insertions(+), 11 deletions(-)
--- a/drivers/net/ethernet/intel/i40e/i40e_alloc.h +++ b/drivers/net/ethernet/intel/i40e/i40e_alloc.h @@ -20,16 +20,11 @@ enum i40e_memory_type { };
/* prototype for functions used for dynamic memory allocation */ -i40e_status i40e_allocate_dma_mem(struct i40e_hw *hw, - struct i40e_dma_mem *mem, - enum i40e_memory_type type, - u64 size, u32 alignment); -i40e_status i40e_free_dma_mem(struct i40e_hw *hw, - struct i40e_dma_mem *mem); -i40e_status i40e_allocate_virt_mem(struct i40e_hw *hw, - struct i40e_virt_mem *mem, - u32 size); -i40e_status i40e_free_virt_mem(struct i40e_hw *hw, - struct i40e_virt_mem *mem); +int i40e_allocate_dma_mem(struct i40e_hw *hw, struct i40e_dma_mem *mem, + enum i40e_memory_type type, u64 size, u32 alignment); +int i40e_free_dma_mem(struct i40e_hw *hw, struct i40e_dma_mem *mem); +int i40e_allocate_virt_mem(struct i40e_hw *hw, struct i40e_virt_mem *mem, + u32 size); +int i40e_free_virt_mem(struct i40e_hw *hw, struct i40e_virt_mem *mem);
#endif /* _I40E_ALLOC_H_ */
Not upstream as this was fixed in a much larger change in commit 5e24d5984c80 ("ice: Use int for ice_status")
The function ice_fltr_add_mac_to_list() has the wrong prototype match from the .h file to the .c declaration, so fix it up, otherwise gcc-13 complains (rightfully) that the type is incorrect.
Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/intel/ice/ice_fltr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/net/ethernet/intel/ice/ice_fltr.c +++ b/drivers/net/ethernet/intel/ice/ice_fltr.c @@ -128,7 +128,7 @@ void ice_fltr_remove_all(struct ice_vsi * @mac: MAC address to add * @action: filter action */ -int +enum ice_status ice_fltr_add_mac_to_list(struct ice_vsi *vsi, struct list_head *list, const u8 *mac, enum ice_sw_fwd_act_type action) {
From: Stefan Wahren stefan.wahren@i2se.com
commit abf2836a381a30763e24acd58da56fa615c6581a upstream.
Replace the custom set of return values with proper Linux error codes for vchiq_initialise().
Reviewed-by: Nicolas Saenz Julienne nsaenz@kernel.org Signed-off-by: Stefan Wahren stefan.wahren@i2se.com Link: https://lore.kernel.org/r/1619347863-16080-11-git-send-email-stefan.wahren@i... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c | 20 +++++----- 1 file changed, 11 insertions(+), 9 deletions(-)
--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c +++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c @@ -147,12 +147,11 @@ vchiq_blocking_bulk_transfer(unsigned in unsigned int size, enum vchiq_bulk_dir dir);
#define VCHIQ_INIT_RETRIES 10 -enum vchiq_status vchiq_initialise(struct vchiq_instance **instance_out) +int vchiq_initialise(struct vchiq_instance **instance_out) { - enum vchiq_status status = VCHIQ_ERROR; struct vchiq_state *state; struct vchiq_instance *instance = NULL; - int i; + int i, ret;
vchiq_log_trace(vchiq_core_log_level, "%s called", __func__);
@@ -169,6 +168,7 @@ enum vchiq_status vchiq_initialise(struc if (i == VCHIQ_INIT_RETRIES) { vchiq_log_error(vchiq_core_log_level, "%s: videocore not initialized\n", __func__); + ret = -ENOTCONN; goto failed; } else if (i > 0) { vchiq_log_warning(vchiq_core_log_level, @@ -180,6 +180,7 @@ enum vchiq_status vchiq_initialise(struc if (!instance) { vchiq_log_error(vchiq_core_log_level, "%s: error allocating vchiq instance\n", __func__); + ret = -ENOMEM; goto failed; }
@@ -190,13 +191,13 @@ enum vchiq_status vchiq_initialise(struc
*instance_out = instance;
- status = VCHIQ_SUCCESS; + ret = 0;
failed: vchiq_log_trace(vchiq_core_log_level, - "%s(%p): returning %d", __func__, instance, status); + "%s(%p): returning %d", __func__, instance, ret);
- return status; + return ret; } EXPORT_SYMBOL(vchiq_initialise);
@@ -2223,6 +2224,7 @@ vchiq_keepalive_thread_func(void *v) enum vchiq_status status; struct vchiq_instance *instance; unsigned int ka_handle; + int ret;
struct vchiq_service_params_kernel params = { .fourcc = VCHIQ_MAKE_FOURCC('K', 'E', 'E', 'P'), @@ -2231,10 +2233,10 @@ vchiq_keepalive_thread_func(void *v) .version_min = KEEPALIVE_VER_MIN };
- status = vchiq_initialise(&instance); - if (status != VCHIQ_SUCCESS) { + ret = vchiq_initialise(&instance); + if (ret) { vchiq_log_error(vchiq_susp_log_level, - "%s vchiq_initialise failed %d", __func__, status); + "%s vchiq_initialise failed %d", __func__, ret); goto exit; }
From: Stephan Gerhold stephan@gerhold.net
[ Upstream commit 0c331fd1dccfba657129380ee084b95c1cedfbef ]
It is usually better to request all necessary resources (clocks, regulators, ...) before starting to make use of them. That way they do not change state in case one of the resources is not available yet and probe deferral (-EPROBE_DEFER) is necessary. This is particularly important for DMA channels and IOMMUs which are not enforced by fw_devlink yet (unless you use fw_devlink.strict=1).
spi-qup does this in the wrong order, the clocks are enabled and disabled again when the DMA channels are not available yet.
This causes issues in some cases: On most SoCs one of the SPI QUP clocks is shared with the UART controller. When using earlycon UART is actively used during boot but might not have probed yet, usually for the same reason (waiting for the DMA controller). In this case, the brief enable/disable cycle ends up gating the clock and further UART console output will halt the system completely.
Avoid this by requesting the DMA channels before changing the clock state.
Fixes: 612762e82ae6 ("spi: qup: Add DMA capabilities") Signed-off-by: Stephan Gerhold stephan@gerhold.net Link: https://lore.kernel.org/r/20230518-spi-qup-clk-defer-v1-1-f49fc9ca4e02@gerho... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-qup.c | 37 ++++++++++++++++++------------------- 1 file changed, 18 insertions(+), 19 deletions(-)
diff --git a/drivers/spi/spi-qup.c b/drivers/spi/spi-qup.c index 8bf58510cca6d..2cc9bb413c108 100644 --- a/drivers/spi/spi-qup.c +++ b/drivers/spi/spi-qup.c @@ -1030,23 +1030,8 @@ static int spi_qup_probe(struct platform_device *pdev) return -ENXIO; }
- ret = clk_prepare_enable(cclk); - if (ret) { - dev_err(dev, "cannot enable core clock\n"); - return ret; - } - - ret = clk_prepare_enable(iclk); - if (ret) { - clk_disable_unprepare(cclk); - dev_err(dev, "cannot enable iface clock\n"); - return ret; - } - master = spi_alloc_master(dev, sizeof(struct spi_qup)); if (!master) { - clk_disable_unprepare(cclk); - clk_disable_unprepare(iclk); dev_err(dev, "cannot allocate master\n"); return -ENOMEM; } @@ -1092,6 +1077,19 @@ static int spi_qup_probe(struct platform_device *pdev) spin_lock_init(&controller->lock); init_completion(&controller->done);
+ ret = clk_prepare_enable(cclk); + if (ret) { + dev_err(dev, "cannot enable core clock\n"); + goto error_dma; + } + + ret = clk_prepare_enable(iclk); + if (ret) { + clk_disable_unprepare(cclk); + dev_err(dev, "cannot enable iface clock\n"); + goto error_dma; + } + iomode = readl_relaxed(base + QUP_IO_M_MODES);
size = QUP_IO_M_OUTPUT_BLOCK_SIZE(iomode); @@ -1121,7 +1119,7 @@ static int spi_qup_probe(struct platform_device *pdev) ret = spi_qup_set_state(controller, QUP_STATE_RESET); if (ret) { dev_err(dev, "cannot set RESET state\n"); - goto error_dma; + goto error_clk; }
writel_relaxed(0, base + QUP_OPERATIONAL); @@ -1145,7 +1143,7 @@ static int spi_qup_probe(struct platform_device *pdev) ret = devm_request_irq(dev, irq, spi_qup_qup_irq, IRQF_TRIGGER_HIGH, pdev->name, controller); if (ret) - goto error_dma; + goto error_clk;
pm_runtime_set_autosuspend_delay(dev, MSEC_PER_SEC); pm_runtime_use_autosuspend(dev); @@ -1160,11 +1158,12 @@ static int spi_qup_probe(struct platform_device *pdev)
disable_pm: pm_runtime_disable(&pdev->dev); +error_clk: + clk_disable_unprepare(cclk); + clk_disable_unprepare(iclk); error_dma: spi_qup_release_dma(master); error: - clk_disable_unprepare(cclk); - clk_disable_unprepare(iclk); spi_master_put(master); return ret; }
From: David Howells dhowells@redhat.com
[ Upstream commit a27648c742104a833a01c54becc24429898d85bf ]
kafs incorrectly passes a zero mtime (ie. 1st Jan 1970) to the server when creating a file, dir or symlink because the mtime recorded in the afs_operation struct gets passed to the server by the marshalling routines, but the afs_mkdir(), afs_create() and afs_symlink() functions don't set it.
This gets masked if a file or directory is subsequently modified.
Fix this by filling in op->mtime before calling the create op.
Fixes: e49c7b2f6de7 ("afs: Build an abstraction around an "operation" concept") Signed-off-by: David Howells dhowells@redhat.com Reviewed-by: Jeffrey Altman jaltman@auristor.com Reviewed-by: Marc Dionne marc.dionne@auristor.com cc: linux-afs@lists.infradead.org cc: linux-fsdevel@vger.kernel.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/afs/dir.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/fs/afs/dir.c b/fs/afs/dir.c index 159795059547f..a59d6293a32b2 100644 --- a/fs/afs/dir.c +++ b/fs/afs/dir.c @@ -1313,6 +1313,7 @@ static int afs_mkdir(struct inode *dir, struct dentry *dentry, umode_t mode) op->dentry = dentry; op->create.mode = S_IFDIR | mode; op->create.reason = afs_edit_dir_for_mkdir; + op->mtime = current_time(dir); op->ops = &afs_mkdir_operation; return afs_do_sync_operation(op); } @@ -1616,6 +1617,7 @@ static int afs_create(struct inode *dir, struct dentry *dentry, umode_t mode, op->dentry = dentry; op->create.mode = S_IFREG | mode; op->create.reason = afs_edit_dir_for_create; + op->mtime = current_time(dir); op->ops = &afs_create_operation; return afs_do_sync_operation(op);
@@ -1745,6 +1747,7 @@ static int afs_symlink(struct inode *dir, struct dentry *dentry, op->ops = &afs_symlink_operation; op->create.reason = afs_edit_dir_for_symlink; op->create.symlink = content; + op->mtime = current_time(dir); return afs_do_sync_operation(op);
error:
From: Lorenzo Bianconi lorenzo@kernel.org
[ Upstream commit 30bc32c7c1f975cc3c14e1c7dc437266311282cf ]
Grab sta_poll_lock spinlock in mt7615_mac_sta_poll routine in order to avoid possible races with mt7615_mac_add_txs() or mt7615_mac_fill_rx() removing msta pointer from sta_poll_list.
Fixes: a621372a04ac ("mt76: mt7615: rework mt7615_mac_sta_poll for usb code") Signed-off-by: Lorenzo Bianconi lorenzo@kernel.org Signed-off-by: Kalle Valo kvalo@kernel.org Link: https://lore.kernel.org/r/48b23404b759de4f1db2ef85975c72a4aeb1097c.168493869... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/wireless/mediatek/mt76/mt7615/mac.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c index b26617026e831..4364f73b501da 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c +++ b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c @@ -779,7 +779,10 @@ void mt7615_mac_sta_poll(struct mt7615_dev *dev)
msta = list_first_entry(&sta_poll_list, struct mt7615_sta, poll_list); + + spin_lock_bh(&dev->sta_poll_lock); list_del_init(&msta->poll_list); + spin_unlock_bh(&dev->sta_poll_lock);
addr = mt7615_mac_wtbl_addr(dev, msta->wcid.idx) + 19 * 4;
From: Qingfang DENG qingfang.deng@siflower.com.cn
[ Upstream commit ed779fe4c9b5a20b4ab4fd6f3e19807445bb78c7 ]
After the blamed commit, the member key is longer 4-byte aligned. On platforms that do not support unaligned access, e.g., MIPS32R2 with unaligned_action set to 1, this will trigger a crash when accessing an IPv6 pneigh_entry, as the key is cast to an in6_addr pointer.
Change the type of the key to u32 to make it aligned.
Fixes: 62dd93181aaa ("[IPV6] NDISC: Set per-entry is_router flag in Proxy NA.") Signed-off-by: Qingfang DENG qingfang.deng@siflower.com.cn Link: https://lore.kernel.org/r/20230601015432.159066-1-dqfext@gmail.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/net/neighbour.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/net/neighbour.h b/include/net/neighbour.h index d5767e25509cc..abb22cfd4827f 100644 --- a/include/net/neighbour.h +++ b/include/net/neighbour.h @@ -174,7 +174,7 @@ struct pneigh_entry { struct net_device *dev; u8 flags; u8 protocol; - u8 key[]; + u32 key[]; };
/*
From: Alexander Sverdlin alexander.sverdlin@siemens.com
[ Upstream commit 5a59a58ec25d44f853c26bdbfda47d73b3067435 ]
LAN9303 doesn't associate FDB (ALR) entries with VLANs, it has just one global Address Logic Resolution table [1].
Ignore VID in port_fdb_{add|del} methods, go on with the global table. This is the same semantics as hellcreek or RZ/N1 implement.
Visible symptoms: LAN9303_MDIO 5b050000.ethernet-1:00: port 2 failed to delete 00:xx:xx:xx:xx:cf vid 1 from fdb: -2 LAN9303_MDIO 5b050000.ethernet-1:00: port 2 failed to add 00:xx:xx:xx:xx:cf vid 1 to fdb: -95
[1] https://ww1.microchip.com/downloads/en/DeviceDoc/00002308A.pdf
Fixes: 0620427ea0d6 ("net: dsa: lan9303: Add fdb/mdb manipulation") Signed-off-by: Alexander Sverdlin alexander.sverdlin@siemens.com Reviewed-by: Vladimir Oltean olteanv@gmail.com Link: https://lore.kernel.org/r/20230531143826.477267-1-alexander.sverdlin@siemens... Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/dsa/lan9303-core.c | 4 ---- 1 file changed, 4 deletions(-)
diff --git a/drivers/net/dsa/lan9303-core.c b/drivers/net/dsa/lan9303-core.c index deeed50a42c05..f5ab0bff4ac29 100644 --- a/drivers/net/dsa/lan9303-core.c +++ b/drivers/net/dsa/lan9303-core.c @@ -1187,8 +1187,6 @@ static int lan9303_port_fdb_add(struct dsa_switch *ds, int port, struct lan9303 *chip = ds->priv;
dev_dbg(chip->dev, "%s(%d, %pM, %d)\n", __func__, port, addr, vid); - if (vid) - return -EOPNOTSUPP;
return lan9303_alr_add_port(chip, addr, port, false); } @@ -1200,8 +1198,6 @@ static int lan9303_port_fdb_del(struct dsa_switch *ds, int port, struct lan9303 *chip = ds->priv;
dev_dbg(chip->dev, "%s(%d, %pM, %d)\n", __func__, port, addr, vid); - if (vid) - return -EOPNOTSUPP; lan9303_alr_del_port(chip, addr, port);
return 0;
From: Wen Gu guwen@linux.alibaba.com
[ Upstream commit c308e9ec004721a656c193243eab61a8be324657 ]
SMCRv1 has a similar issue to SMCRv2 (see link below) that may access invalid MRs of RMBs when construct LLC ADD LINK CONT messages.
BUG: kernel NULL pointer dereference, address: 0000000000000014 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 5 PID: 48 Comm: kworker/5:0 Kdump: loaded Tainted: G W E 6.4.0-rc3+ #49 Workqueue: events smc_llc_add_link_work [smc] RIP: 0010:smc_llc_add_link_cont+0x160/0x270 [smc] RSP: 0018:ffffa737801d3d50 EFLAGS: 00010286 RAX: ffff964f82144000 RBX: ffffa737801d3dd8 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff964f81370c30 RBP: ffffa737801d3dd4 R08: ffff964f81370000 R09: ffffa737801d3db0 R10: 0000000000000001 R11: 0000000000000060 R12: ffff964f82e70000 R13: ffff964f81370c38 R14: ffffa737801d3dd3 R15: 0000000000000001 FS: 0000000000000000(0000) GS:ffff9652bfd40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000014 CR3: 000000008fa20004 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> smc_llc_srv_rkey_exchange+0xa7/0x190 [smc] smc_llc_srv_add_link+0x3ae/0x5a0 [smc] smc_llc_add_link_work+0xb8/0x140 [smc] process_one_work+0x1e5/0x3f0 worker_thread+0x4d/0x2f0 ? __pfx_worker_thread+0x10/0x10 kthread+0xe5/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x2c/0x50 </TASK>
When an alernate RNIC is available in system, SMC will try to add a new link based on the RNIC for resilience. All the RMBs in use will be mapped to the new link. Then the RMBs' MRs corresponding to the new link will be filled into LLC messages. For SMCRv1, they are ADD LINK CONT messages.
However smc_llc_add_link_cont() may mistakenly access to unused RMBs which haven't been mapped to the new link and have no valid MRs, thus causing a crash. So this patch fixes it.
Fixes: 87f88cda2128 ("net/smc: rkey processing for a new link as SMC client") Link: https://lore.kernel.org/r/1685101741-74826-3-git-send-email-guwen@linux.alib... Signed-off-by: Wen Gu guwen@linux.alibaba.com Reviewed-by: Wenjia Zhang wenjia@linux.ibm.com Reviewed-by: Tony Lu tonylu@linux.alibaba.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/smc/smc_llc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/net/smc/smc_llc.c b/net/smc/smc_llc.c index 0ef15f8fba902..d5ee961ca72d5 100644 --- a/net/smc/smc_llc.c +++ b/net/smc/smc_llc.c @@ -716,6 +716,8 @@ static int smc_llc_add_link_cont(struct smc_link *link, addc_llc->num_rkeys = *num_rkeys_todo; n = *num_rkeys_todo; for (i = 0; i < min_t(u8, n, SMC_LLC_RKEYS_PER_CONT_MSG); i++) { + while (*buf_pos && !(*buf_pos)->used) + *buf_pos = smc_llc_get_next_rmb(lgr, buf_lst, *buf_pos); if (!*buf_pos) { addc_llc->num_rkeys = addc_llc->num_rkeys - *num_rkeys_todo; @@ -731,8 +733,6 @@ static int smc_llc_add_link_cont(struct smc_link *link,
(*num_rkeys_todo)--; *buf_pos = smc_llc_get_next_rmb(lgr, buf_lst, *buf_pos); - while (*buf_pos && !(*buf_pos)->used) - *buf_pos = smc_llc_get_next_rmb(lgr, buf_lst, *buf_pos); } addc_llc->hd.common.type = SMC_LLC_ADD_LINK_CONT; addc_llc->hd.length = sizeof(struct smc_llc_msg_add_link_cont);
From: Eric Dumazet edumazet@google.com
[ Upstream commit cd2b8113c2e8b9f5a88a942e1eaca61eba401b85 ]
We got multiple syzbot reports, all duplicates of the following [1]
syzbot managed to install fq_pie with a zero TCA_FQ_PIE_QUANTUM, thus triggering infinite loops.
Use limits similar to sch_fq, with commits 3725a269815b ("pkt_sched: fq: avoid hang when quantum 0") and d9e15a273306 ("pkt_sched: fq: do not accept silly TCA_FQ_QUANTUM")
[1] watchdog: BUG: soft lockup - CPU#0 stuck for 26s! [swapper/0:0] Modules linked in: irq event stamp: 172817 hardirqs last enabled at (172816): [<ffff80001242fde4>] __el1_irq arch/arm64/kernel/entry-common.c:476 [inline] hardirqs last enabled at (172816): [<ffff80001242fde4>] el1_interrupt+0x58/0x68 arch/arm64/kernel/entry-common.c:486 hardirqs last disabled at (172817): [<ffff80001242fdb0>] __el1_irq arch/arm64/kernel/entry-common.c:468 [inline] hardirqs last disabled at (172817): [<ffff80001242fdb0>] el1_interrupt+0x24/0x68 arch/arm64/kernel/entry-common.c:486 softirqs last enabled at (167634): [<ffff800008020c1c>] softirq_handle_end kernel/softirq.c:414 [inline] softirqs last enabled at (167634): [<ffff800008020c1c>] __do_softirq+0xac0/0xd54 kernel/softirq.c:600 softirqs last disabled at (167701): [<ffff80000802a660>] ____do_softirq+0x14/0x20 arch/arm64/kernel/irq.c:80 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.4.0-rc3-syzkaller-geb0f1697d729 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 04/28/2023 pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : fq_pie_qdisc_dequeue+0x10c/0x8ac net/sched/sch_fq_pie.c:246 lr : fq_pie_qdisc_dequeue+0xe4/0x8ac net/sched/sch_fq_pie.c:240 sp : ffff800008007210 x29: ffff800008007280 x28: ffff0000c86f7890 x27: ffff0000cb20c2e8 x26: ffff0000cb20c2f0 x25: dfff800000000000 x24: ffff0000cb20c2e0 x23: ffff0000c86f7880 x22: 0000000000000040 x21: 1fffe000190def10 x20: ffff0000cb20c2e0 x19: ffff0000cb20c2e0 x18: ffff800008006e60 x17: 0000000000000000 x16: ffff80000850af6c x15: 0000000000000302 x14: 0000000000000100 x13: 0000000000000000 x12: 0000000000000001 x11: 0000000000000302 x10: 0000000000000100 x9 : 0000000000000000 x8 : 0000000000000000 x7 : ffff80000841c468 x6 : 0000000000000000 x5 : 0000000000000001 x4 : 0000000000000001 x3 : 0000000000000000 x2 : ffff0000cb20c2e0 x1 : ffff0000cb20c2e0 x0 : 0000000000000001 Call trace: fq_pie_qdisc_dequeue+0x10c/0x8ac net/sched/sch_fq_pie.c:246 dequeue_skb net/sched/sch_generic.c:292 [inline] qdisc_restart net/sched/sch_generic.c:397 [inline] __qdisc_run+0x1fc/0x231c net/sched/sch_generic.c:415 __dev_xmit_skb net/core/dev.c:3868 [inline] __dev_queue_xmit+0xc80/0x3318 net/core/dev.c:4210 dev_queue_xmit include/linux/netdevice.h:3085 [inline] neigh_connected_output+0x2f8/0x38c net/core/neighbour.c:1581 neigh_output include/net/neighbour.h:544 [inline] ip6_finish_output2+0xd60/0x1a1c net/ipv6/ip6_output.c:134 __ip6_finish_output net/ipv6/ip6_output.c:195 [inline] ip6_finish_output+0x538/0x8c8 net/ipv6/ip6_output.c:206 NF_HOOK_COND include/linux/netfilter.h:292 [inline] ip6_output+0x270/0x594 net/ipv6/ip6_output.c:227 dst_output include/net/dst.h:458 [inline] NF_HOOK include/linux/netfilter.h:303 [inline] ndisc_send_skb+0xc30/0x1790 net/ipv6/ndisc.c:508 ndisc_send_rs+0x47c/0x5d4 net/ipv6/ndisc.c:718 addrconf_rs_timer+0x300/0x58c net/ipv6/addrconf.c:3936 call_timer_fn+0x19c/0x8cc kernel/time/timer.c:1700 expire_timers kernel/time/timer.c:1751 [inline] __run_timers+0x55c/0x734 kernel/time/timer.c:2022 run_timer_softirq+0x7c/0x114 kernel/time/timer.c:2035 __do_softirq+0x2d0/0xd54 kernel/softirq.c:571 ____do_softirq+0x14/0x20 arch/arm64/kernel/irq.c:80 call_on_irq_stack+0x24/0x4c arch/arm64/kernel/entry.S:882 do_softirq_own_stack+0x20/0x2c arch/arm64/kernel/irq.c:85 invoke_softirq kernel/softirq.c:452 [inline] __irq_exit_rcu+0x28c/0x534 kernel/softirq.c:650 irq_exit_rcu+0x14/0x84 kernel/softirq.c:662 __el1_irq arch/arm64/kernel/entry-common.c:472 [inline] el1_interrupt+0x38/0x68 arch/arm64/kernel/entry-common.c:486 el1h_64_irq_handler+0x18/0x24 arch/arm64/kernel/entry-common.c:491 el1h_64_irq+0x64/0x68 arch/arm64/kernel/entry.S:587 __daif_local_irq_enable arch/arm64/include/asm/irqflags.h:33 [inline] arch_local_irq_enable+0x8/0xc arch/arm64/include/asm/irqflags.h:55 cpuidle_idle_call kernel/sched/idle.c:170 [inline] do_idle+0x1f0/0x4e8 kernel/sched/idle.c:282 cpu_startup_entry+0x24/0x28 kernel/sched/idle.c:379 rest_init+0x2dc/0x2f4 init/main.c:735 start_kernel+0x0/0x55c init/main.c:834 start_kernel+0x3f0/0x55c init/main.c:1088 __primary_switched+0xb8/0xc0 arch/arm64/kernel/head.S:523
Fixes: ec97ecf1ebe4 ("net: sched: add Flow Queue PIE packet scheduler") Reported-by: syzbot syzkaller@googlegroups.com Signed-off-by: Eric Dumazet edumazet@google.com Reviewed-by: Jamal Hadi Salim jhs@mojatatu.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/sched/sch_fq_pie.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/net/sched/sch_fq_pie.c b/net/sched/sch_fq_pie.c index cf04f70e96bf1..4f6b5b6fba3ed 100644 --- a/net/sched/sch_fq_pie.c +++ b/net/sched/sch_fq_pie.c @@ -201,6 +201,11 @@ static int fq_pie_qdisc_enqueue(struct sk_buff *skb, struct Qdisc *sch, return NET_XMIT_CN; }
+static struct netlink_range_validation fq_pie_q_range = { + .min = 1, + .max = 1 << 20, +}; + static const struct nla_policy fq_pie_policy[TCA_FQ_PIE_MAX + 1] = { [TCA_FQ_PIE_LIMIT] = {.type = NLA_U32}, [TCA_FQ_PIE_FLOWS] = {.type = NLA_U32}, @@ -208,7 +213,8 @@ static const struct nla_policy fq_pie_policy[TCA_FQ_PIE_MAX + 1] = { [TCA_FQ_PIE_TUPDATE] = {.type = NLA_U32}, [TCA_FQ_PIE_ALPHA] = {.type = NLA_U32}, [TCA_FQ_PIE_BETA] = {.type = NLA_U32}, - [TCA_FQ_PIE_QUANTUM] = {.type = NLA_U32}, + [TCA_FQ_PIE_QUANTUM] = + NLA_POLICY_FULL_RANGE(NLA_U32, &fq_pie_q_range), [TCA_FQ_PIE_MEMORY_LIMIT] = {.type = NLA_U32}, [TCA_FQ_PIE_ECN_PROB] = {.type = NLA_U32}, [TCA_FQ_PIE_ECN] = {.type = NLA_U32},
From: Ying Hsu yinghsu@chromium.org
[ Upstream commit 02c5ea5246a44d6ffde0fddebfc1d56188052976 ]
L2CAP assumes that the locks conn->chan_lock and chan->lock are acquired in the order conn->chan_lock, chan->lock to avoid potential deadlock. For example, l2sock_shutdown acquires these locks in the order: mutex_lock(&conn->chan_lock) l2cap_chan_lock(chan)
However, l2cap_disconnect_req acquires chan->lock in l2cap_get_chan_by_scid first and then acquires conn->chan_lock before calling l2cap_chan_del. This means that these locks are acquired in unexpected order, which leads to potential deadlock: l2cap_chan_lock(c) mutex_lock(&conn->chan_lock)
This patch releases chan->lock before acquiring the conn_chan_lock to avoid the potential deadlock.
Fixes: a2a9339e1c9d ("Bluetooth: L2CAP: Fix use-after-free in l2cap_disconnect_{req,rsp}") Signed-off-by: Ying Hsu yinghsu@chromium.org Signed-off-by: Luiz Augusto von Dentz luiz.von.dentz@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/bluetooth/l2cap_core.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c index b85ce276e2a3c..2f05507bb36ef 100644 --- a/net/bluetooth/l2cap_core.c +++ b/net/bluetooth/l2cap_core.c @@ -4659,7 +4659,9 @@ static inline int l2cap_disconnect_req(struct l2cap_conn *conn,
chan->ops->set_shutdown(chan);
+ l2cap_chan_unlock(chan); mutex_lock(&conn->chan_lock); + l2cap_chan_lock(chan); l2cap_chan_del(chan, ECONNRESET); mutex_unlock(&conn->chan_lock);
@@ -4698,7 +4700,9 @@ static inline int l2cap_disconnect_rsp(struct l2cap_conn *conn, return 0; }
+ l2cap_chan_unlock(chan); mutex_lock(&conn->chan_lock); + l2cap_chan_lock(chan); l2cap_chan_del(chan, 0); mutex_unlock(&conn->chan_lock);
From: Sungwoo Kim iam@sung-woo.kim
[ Upstream commit 75767213f3d9b97f63694d02260b6a49a2271876 ]
When receiving a connect response we should make sure that the DCID is within the valid range and that we don't already have another channel allocated for the same DCID. Missing checks may violate the specification (BLUETOOTH CORE SPECIFICATION Version 5.4 | Vol 3, Part A, Page 1046).
Fixes: 40624183c202 ("Bluetooth: L2CAP: Add missing checks for invalid LE DCID") Signed-off-by: Sungwoo Kim iam@sung-woo.kim Signed-off-by: Luiz Augusto von Dentz luiz.von.dentz@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/bluetooth/l2cap_core.c | 9 +++++++++ 1 file changed, 9 insertions(+)
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c index 2f05507bb36ef..568f0f072b3df 100644 --- a/net/bluetooth/l2cap_core.c +++ b/net/bluetooth/l2cap_core.c @@ -4303,6 +4303,10 @@ static int l2cap_connect_create_rsp(struct l2cap_conn *conn, result = __le16_to_cpu(rsp->result); status = __le16_to_cpu(rsp->status);
+ if (result == L2CAP_CR_SUCCESS && (dcid < L2CAP_CID_DYN_START || + dcid > L2CAP_CID_DYN_END)) + return -EPROTO; + BT_DBG("dcid 0x%4.4x scid 0x%4.4x result 0x%2.2x status 0x%2.2x", dcid, scid, result, status);
@@ -4334,6 +4338,11 @@ static int l2cap_connect_create_rsp(struct l2cap_conn *conn,
switch (result) { case L2CAP_CR_SUCCESS: + if (__l2cap_get_chan_by_dcid(conn, dcid)) { + err = -EBADSLT; + break; + } + l2cap_state_change(chan, BT_CONFIG); chan->ident = 0; chan->dcid = dcid;
From: Manish Chopra manishc@marvell.com
[ Upstream commit 42510dffd0e2c27046905f742172ed6662af5557 ]
Statistics read through bond interface via sysfs causes below bug and traces as it triggers the bonding module to collect the slave device statistics while holding the spinlock, beneath that qede->qed driver statistics flow gets scheduled out due to usleep_range() used in PTT acquire logic
[ 3673.988874] Hardware name: HPE ProLiant DL365 Gen10 Plus/ProLiant DL365 Gen10 Plus, BIOS A42 10/29/2021 [ 3673.988878] Call Trace: [ 3673.988891] dump_stack_lvl+0x34/0x44 [ 3673.988908] __schedule_bug.cold+0x47/0x53 [ 3673.988918] __schedule+0x3fb/0x560 [ 3673.988929] schedule+0x43/0xb0 [ 3673.988932] schedule_hrtimeout_range_clock+0xbf/0x1b0 [ 3673.988937] ? __hrtimer_init+0xc0/0xc0 [ 3673.988950] usleep_range+0x5e/0x80 [ 3673.988955] qed_ptt_acquire+0x2b/0xd0 [qed] [ 3673.988981] _qed_get_vport_stats+0x141/0x240 [qed] [ 3673.989001] qed_get_vport_stats+0x18/0x80 [qed] [ 3673.989016] qede_fill_by_demand_stats+0x37/0x400 [qede] [ 3673.989028] qede_get_stats64+0x19/0xe0 [qede] [ 3673.989034] dev_get_stats+0x5c/0xc0 [ 3673.989045] netstat_show.constprop.0+0x52/0xb0 [ 3673.989055] dev_attr_show+0x19/0x40 [ 3673.989065] sysfs_kf_seq_show+0x9b/0xf0 [ 3673.989076] seq_read_iter+0x120/0x4b0 [ 3673.989087] new_sync_read+0x118/0x1a0 [ 3673.989095] vfs_read+0xf3/0x180 [ 3673.989099] ksys_read+0x5f/0xe0 [ 3673.989102] do_syscall_64+0x3b/0x90 [ 3673.989109] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 3673.989115] RIP: 0033:0x7f8467d0b082 [ 3673.989119] Code: c0 e9 b2 fe ff ff 50 48 8d 3d ca 05 08 00 e8 35 e7 01 00 0f 1f 44 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 0f 05 <48> 3d 00 f0 ff ff 77 56 c3 0f 1f 44 00 00 48 83 ec 28 48 89 54 24 [ 3673.989121] RSP: 002b:00007ffffb21fd08 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 [ 3673.989127] RAX: ffffffffffffffda RBX: 000000000100eca0 RCX: 00007f8467d0b082 [ 3673.989128] RDX: 00000000000003ff RSI: 00007ffffb21fdc0 RDI: 0000000000000003 [ 3673.989130] RBP: 00007f8467b96028 R08: 0000000000000010 R09: 00007ffffb21ec00 [ 3673.989132] R10: 00007ffffb27b170 R11: 0000000000000246 R12: 00000000000000f0 [ 3673.989134] R13: 0000000000000003 R14: 00007f8467b92000 R15: 0000000000045a05 [ 3673.989139] CPU: 30 PID: 285188 Comm: read_all Kdump: loaded Tainted: G W OE
Fix this by collecting the statistics asynchronously from a periodic delayed work scheduled at default stats coalescing interval and return the recent copy of statisitcs from .ndo_get_stats64(), also add ability to configure/retrieve stats coalescing interval using below commands -
ethtool -C ethx stats-block-usecs <val> ethtool -c ethx
Fixes: 133fac0eedc3 ("qede: Add basic ethtool support") Cc: Sudarsana Kalluru skalluru@marvell.com Cc: David Miller davem@davemloft.net Signed-off-by: Manish Chopra manishc@marvell.com Link: https://lore.kernel.org/r/20230605112600.48238-1-manishc@marvell.com Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/qlogic/qed/qed_l2.c | 2 +- drivers/net/ethernet/qlogic/qede/qede.h | 4 +++ .../net/ethernet/qlogic/qede/qede_ethtool.c | 24 +++++++++++-- drivers/net/ethernet/qlogic/qede/qede_main.c | 34 ++++++++++++++++++- 4 files changed, 60 insertions(+), 4 deletions(-)
diff --git a/drivers/net/ethernet/qlogic/qed/qed_l2.c b/drivers/net/ethernet/qlogic/qed/qed_l2.c index 07824bf9d68d9..0157bcd2efffa 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_l2.c +++ b/drivers/net/ethernet/qlogic/qed/qed_l2.c @@ -1902,7 +1902,7 @@ void qed_get_vport_stats(struct qed_dev *cdev, struct qed_eth_stats *stats) { u32 i;
- if (!cdev) { + if (!cdev || cdev->recov_in_prog) { memset(stats, 0, sizeof(*stats)); return; } diff --git a/drivers/net/ethernet/qlogic/qede/qede.h b/drivers/net/ethernet/qlogic/qede/qede.h index f313fd7303316..3251d58a263fa 100644 --- a/drivers/net/ethernet/qlogic/qede/qede.h +++ b/drivers/net/ethernet/qlogic/qede/qede.h @@ -273,6 +273,10 @@ struct qede_dev { #define QEDE_ERR_WARN 3
struct qede_dump_info dump_info; + struct delayed_work periodic_task; + unsigned long stats_coal_ticks; + u32 stats_coal_usecs; + spinlock_t stats_lock; /* lock for vport stats access */ };
enum QEDE_STATE { diff --git a/drivers/net/ethernet/qlogic/qede/qede_ethtool.c b/drivers/net/ethernet/qlogic/qede/qede_ethtool.c index bedbb85a179ae..db104e035ba18 100644 --- a/drivers/net/ethernet/qlogic/qede/qede_ethtool.c +++ b/drivers/net/ethernet/qlogic/qede/qede_ethtool.c @@ -426,6 +426,8 @@ static void qede_get_ethtool_stats(struct net_device *dev, } }
+ spin_lock(&edev->stats_lock); + for (i = 0; i < QEDE_NUM_STATS; i++) { if (qede_is_irrelevant_stat(edev, i)) continue; @@ -435,6 +437,8 @@ static void qede_get_ethtool_stats(struct net_device *dev, buf++; }
+ spin_unlock(&edev->stats_lock); + __qede_unlock(edev); }
@@ -815,6 +819,7 @@ static int qede_get_coalesce(struct net_device *dev,
coal->rx_coalesce_usecs = rx_coal; coal->tx_coalesce_usecs = tx_coal; + coal->stats_block_coalesce_usecs = edev->stats_coal_usecs;
return rc; } @@ -827,6 +832,19 @@ static int qede_set_coalesce(struct net_device *dev, int i, rc = 0; u16 rxc, txc;
+ if (edev->stats_coal_usecs != coal->stats_block_coalesce_usecs) { + edev->stats_coal_usecs = coal->stats_block_coalesce_usecs; + if (edev->stats_coal_usecs) { + edev->stats_coal_ticks = usecs_to_jiffies(edev->stats_coal_usecs); + schedule_delayed_work(&edev->periodic_task, 0); + + DP_INFO(edev, "Configured stats coal ticks=%lu jiffies\n", + edev->stats_coal_ticks); + } else { + cancel_delayed_work_sync(&edev->periodic_task); + } + } + if (!netif_running(dev)) { DP_INFO(edev, "Interface is down\n"); return -EINVAL; @@ -2106,7 +2124,8 @@ static int qede_get_dump_data(struct net_device *dev, }
static const struct ethtool_ops qede_ethtool_ops = { - .supported_coalesce_params = ETHTOOL_COALESCE_USECS, + .supported_coalesce_params = ETHTOOL_COALESCE_USECS | + ETHTOOL_COALESCE_STATS_BLOCK_USECS, .get_link_ksettings = qede_get_link_ksettings, .set_link_ksettings = qede_set_link_ksettings, .get_drvinfo = qede_get_drvinfo, @@ -2155,7 +2174,8 @@ static const struct ethtool_ops qede_ethtool_ops = { };
static const struct ethtool_ops qede_vf_ethtool_ops = { - .supported_coalesce_params = ETHTOOL_COALESCE_USECS, + .supported_coalesce_params = ETHTOOL_COALESCE_USECS | + ETHTOOL_COALESCE_STATS_BLOCK_USECS, .get_link_ksettings = qede_get_link_ksettings, .get_drvinfo = qede_get_drvinfo, .get_msglevel = qede_get_msglevel, diff --git a/drivers/net/ethernet/qlogic/qede/qede_main.c b/drivers/net/ethernet/qlogic/qede/qede_main.c index e93f06e4a1729..681ec142c23de 100644 --- a/drivers/net/ethernet/qlogic/qede/qede_main.c +++ b/drivers/net/ethernet/qlogic/qede/qede_main.c @@ -313,6 +313,8 @@ void qede_fill_by_demand_stats(struct qede_dev *edev)
edev->ops->get_vport_stats(edev->cdev, &stats);
+ spin_lock(&edev->stats_lock); + p_common->no_buff_discards = stats.common.no_buff_discards; p_common->packet_too_big_discard = stats.common.packet_too_big_discard; p_common->ttl0_discard = stats.common.ttl0_discard; @@ -410,6 +412,8 @@ void qede_fill_by_demand_stats(struct qede_dev *edev) p_ah->tx_1519_to_max_byte_packets = stats.ah.tx_1519_to_max_byte_packets; } + + spin_unlock(&edev->stats_lock); }
static void qede_get_stats64(struct net_device *dev, @@ -418,9 +422,10 @@ static void qede_get_stats64(struct net_device *dev, struct qede_dev *edev = netdev_priv(dev); struct qede_stats_common *p_common;
- qede_fill_by_demand_stats(edev); p_common = &edev->stats.common;
+ spin_lock(&edev->stats_lock); + stats->rx_packets = p_common->rx_ucast_pkts + p_common->rx_mcast_pkts + p_common->rx_bcast_pkts; stats->tx_packets = p_common->tx_ucast_pkts + p_common->tx_mcast_pkts + @@ -440,6 +445,8 @@ static void qede_get_stats64(struct net_device *dev, stats->collisions = edev->stats.bb.tx_total_collisions; stats->rx_crc_errors = p_common->rx_crc_errors; stats->rx_frame_errors = p_common->rx_align_errors; + + spin_unlock(&edev->stats_lock); }
#ifdef CONFIG_QED_SRIOV @@ -1001,6 +1008,23 @@ static void qede_unlock(struct qede_dev *edev) rtnl_unlock(); }
+static void qede_periodic_task(struct work_struct *work) +{ + struct qede_dev *edev = container_of(work, struct qede_dev, + periodic_task.work); + + qede_fill_by_demand_stats(edev); + schedule_delayed_work(&edev->periodic_task, edev->stats_coal_ticks); +} + +static void qede_init_periodic_task(struct qede_dev *edev) +{ + INIT_DELAYED_WORK(&edev->periodic_task, qede_periodic_task); + spin_lock_init(&edev->stats_lock); + edev->stats_coal_usecs = USEC_PER_SEC; + edev->stats_coal_ticks = usecs_to_jiffies(USEC_PER_SEC); +} + static void qede_sp_task(struct work_struct *work) { struct qede_dev *edev = container_of(work, struct qede_dev, @@ -1020,6 +1044,7 @@ static void qede_sp_task(struct work_struct *work) */
if (test_and_clear_bit(QEDE_SP_RECOVERY, &edev->sp_flags)) { + cancel_delayed_work_sync(&edev->periodic_task); #ifdef CONFIG_QED_SRIOV /* SRIOV must be disabled outside the lock to avoid a deadlock. * The recovery of the active VFs is currently not supported. @@ -1216,6 +1241,7 @@ static int __qede_probe(struct pci_dev *pdev, u32 dp_module, u8 dp_level, */ INIT_DELAYED_WORK(&edev->sp_task, qede_sp_task); mutex_init(&edev->qede_lock); + qede_init_periodic_task(edev);
rc = register_netdev(edev->ndev); if (rc) { @@ -1240,6 +1266,11 @@ static int __qede_probe(struct pci_dev *pdev, u32 dp_module, u8 dp_level, edev->rx_copybreak = QEDE_RX_HDR_SIZE;
qede_log_probe(edev); + + /* retain user config (for example - after recovery) */ + if (edev->stats_coal_usecs) + schedule_delayed_work(&edev->periodic_task, 0); + return 0;
err4: @@ -1308,6 +1339,7 @@ static void __qede_remove(struct pci_dev *pdev, enum qede_remove_mode mode) unregister_netdev(ndev);
cancel_delayed_work_sync(&edev->sp_task); + cancel_delayed_work_sync(&edev->periodic_task);
edev->ops->common->set_power_state(cdev, PCI_D0);
From: Tijs Van Buggenhout tijs.van.buggenhout@axsguard.com
[ Upstream commit e1f543dc660b44618a1bd72ddb4ca0828a95f7ad ]
An nf_conntrack_helper from nf_conn_help may become NULL after DNAT.
Observed when TCP port 1720 (Q931_PORT), associated with h323 conntrack helper, is DNAT'ed to another destination port (e.g. 1730), while nfqueue is being used for final acceptance (e.g. snort).
This happenned after transition from kernel 4.14 to 5.10.161.
Workarounds: * keep the same port (1720) in DNAT * disable nfqueue * disable/unload h323 NAT helper
$ linux-5.10/scripts/decode_stacktrace.sh vmlinux < /tmp/kernel.log BUG: kernel NULL pointer dereference, address: 0000000000000084 [..] RIP: 0010:nf_conntrack_update (net/netfilter/nf_conntrack_core.c:2080 net/netfilter/nf_conntrack_core.c:2134) nf_conntrack [..] nfqnl_reinject (net/netfilter/nfnetlink_queue.c:237) nfnetlink_queue nfqnl_recv_verdict (net/netfilter/nfnetlink_queue.c:1230) nfnetlink_queue nfnetlink_rcv_msg (net/netfilter/nfnetlink.c:241) nfnetlink [..]
Fixes: ee04805ff54a ("netfilter: conntrack: make conntrack userspace helpers work again") Signed-off-by: Tijs Van Buggenhout tijs.van.buggenhout@axsguard.com Signed-off-by: Florian Westphal fw@strlen.de Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/nf_conntrack_core.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c index 193a18bfddc0a..f82a234ac53a1 100644 --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -2075,6 +2075,9 @@ static int nf_confirm_cthelper(struct sk_buff *skb, struct nf_conn *ct, return 0;
helper = rcu_dereference(help->helper); + if (!helper) + return 0; + if (!(helper->flags & NF_CT_HELPER_F_USERSPACE)) return 0;
From: Kuniyuki Iwashima kuniyu@amazon.com
[ Upstream commit 24e227896bbf003165e006732dccb3516f87f88e ]
syzkaller found a repro that causes Hung Task [0] with ipset. The repro first creates an ipset and then tries to delete a large number of IPs from the ipset concurrently:
IPSET_ATTR_IPADDR_IPV4 : 172.20.20.187 IPSET_ATTR_CIDR : 2
The first deleting thread hogs a CPU with nfnl_lock(NFNL_SUBSYS_IPSET) held, and other threads wait for it to be released.
Previously, the same issue existed in set->variant->uadt() that could run so long under ip_set_lock(set). Commit 5e29dc36bd5e ("netfilter: ipset: Rework long task execution when adding/deleting entries") tried to fix it, but the issue still exists in the caller with another mutex.
While adding/deleting many IPs, we should release the CPU periodically to prevent someone from abusing ipset to hang the system.
Note we need to increment the ipset's refcnt to prevent the ipset from being destroyed while rescheduling.
[0]: INFO: task syz-executor174:268 blocked for more than 143 seconds. Not tainted 6.4.0-rc1-00145-gba79e9a73284 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:syz-executor174 state:D stack:0 pid:268 ppid:260 flags:0x0000000d Call trace: __switch_to+0x308/0x714 arch/arm64/kernel/process.c:556 context_switch kernel/sched/core.c:5343 [inline] __schedule+0xd84/0x1648 kernel/sched/core.c:6669 schedule+0xf0/0x214 kernel/sched/core.c:6745 schedule_preempt_disabled+0x58/0xf0 kernel/sched/core.c:6804 __mutex_lock_common kernel/locking/mutex.c:679 [inline] __mutex_lock+0x6fc/0xdb0 kernel/locking/mutex.c:747 __mutex_lock_slowpath+0x14/0x20 kernel/locking/mutex.c:1035 mutex_lock+0x98/0xf0 kernel/locking/mutex.c:286 nfnl_lock net/netfilter/nfnetlink.c:98 [inline] nfnetlink_rcv_msg+0x480/0x70c net/netfilter/nfnetlink.c:295 netlink_rcv_skb+0x1c0/0x350 net/netlink/af_netlink.c:2546 nfnetlink_rcv+0x18c/0x199c net/netfilter/nfnetlink.c:658 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0x664/0x8cc net/netlink/af_netlink.c:1365 netlink_sendmsg+0x6d0/0xa4c net/netlink/af_netlink.c:1913 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg net/socket.c:747 [inline] ____sys_sendmsg+0x4b8/0x810 net/socket.c:2503 ___sys_sendmsg net/socket.c:2557 [inline] __sys_sendmsg+0x1f8/0x2a4 net/socket.c:2586 __do_sys_sendmsg net/socket.c:2595 [inline] __se_sys_sendmsg net/socket.c:2593 [inline] __arm64_sys_sendmsg+0x80/0x94 net/socket.c:2593 __invoke_syscall arch/arm64/kernel/syscall.c:38 [inline] invoke_syscall+0x84/0x270 arch/arm64/kernel/syscall.c:52 el0_svc_common+0x134/0x24c arch/arm64/kernel/syscall.c:142 do_el0_svc+0x64/0x198 arch/arm64/kernel/syscall.c:193 el0_svc+0x2c/0x7c arch/arm64/kernel/entry-common.c:637 el0t_64_sync_handler+0x84/0xf0 arch/arm64/kernel/entry-common.c:655 el0t_64_sync+0x190/0x194 arch/arm64/kernel/entry.S:591
Reported-by: syzkaller syzkaller@googlegroups.com Fixes: a7b4f989a629 ("netfilter: ipset: IP set core support") Signed-off-by: Kuniyuki Iwashima kuniyu@amazon.com Acked-by: Jozsef Kadlecsik kadlec@netfilter.org Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/ipset/ip_set_core.c | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/net/netfilter/ipset/ip_set_core.c b/net/netfilter/ipset/ip_set_core.c index 1bf6ab83644b3..55ac0cc12657c 100644 --- a/net/netfilter/ipset/ip_set_core.c +++ b/net/netfilter/ipset/ip_set_core.c @@ -1704,6 +1704,14 @@ call_ad(struct sock *ctnl, struct sk_buff *skb, struct ip_set *set, bool eexist = flags & IPSET_FLAG_EXIST, retried = false;
do { + if (retried) { + __ip_set_get(set); + nfnl_unlock(NFNL_SUBSYS_IPSET); + cond_resched(); + nfnl_lock(NFNL_SUBSYS_IPSET); + __ip_set_put(set); + } + ip_set_lock(set); ret = set->variant->uadt(set, tb, adt, &lineno, flags, retried); ip_set_unlock(set);
From: Kuniyuki Iwashima kuniyu@amazon.com
[ Upstream commit a2f4c143d76b1a47c91ef9bc46907116b111da0b ]
A remote DoS vulnerability of RPL Source Routing is assigned CVE-2023-2156.
The Source Routing Header (SRH) has the following format:
0 1 2 3 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Next Header | Hdr Ext Len | Routing Type | Segments Left | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | CmprI | CmprE | Pad | Reserved | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | | . . . Addresses[1..n] . . . | | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
The originator of an SRH places the first hop's IPv6 address in the IPv6 header's IPv6 Destination Address and the second hop's IPv6 address as the first address in Addresses[1..n].
The CmprI and CmprE fields indicate the number of prefix octets that are shared with the IPv6 Destination Address. When CmprI or CmprE is not 0, Addresses[1..n] are compressed as follows:
1..n-1 : (16 - CmprI) bytes n : (16 - CmprE) bytes
Segments Left indicates the number of route segments remaining. When the value is not zero, the SRH is forwarded to the next hop. Its address is extracted from Addresses[n - Segment Left + 1] and swapped with IPv6 Destination Address.
When Segment Left is greater than or equal to 2, the size of SRH is not changed because Addresses[1..n-1] are decompressed and recompressed with CmprI.
OTOH, when Segment Left changes from 1 to 0, the new SRH could have a different size because Addresses[1..n-1] are decompressed with CmprI and recompressed with CmprE.
Let's say CmprI is 15 and CmprE is 0. When we receive SRH with Segment Left >= 2, Addresses[1..n-1] have 1 byte for each, and Addresses[n] has 16 bytes. When Segment Left is 1, Addresses[1..n-1] is decompressed to 16 bytes and not recompressed. Finally, the new SRH will need more room in the header, and the size is (16 - 1) * (n - 1) bytes.
Here the max value of n is 255 as Segment Left is u8, so in the worst case, we have to allocate 3825 bytes in the skb headroom. However, now we only allocate a small fixed buffer that is IPV6_RPL_SRH_WORST_SWAP_SIZE (16 + 7 bytes). If the decompressed size overflows the room, skb_push() hits BUG() below [0].
Instead of allocating the fixed buffer for every packet, let's allocate enough headroom only when we receive SRH with Segment Left 1.
[0]: skbuff: skb_under_panic: text:ffffffff81c9f6e2 len:576 put:576 head:ffff8880070b5180 data:ffff8880070b4fb0 tail:0x70 end:0x140 dev:lo kernel BUG at net/core/skbuff.c:200! invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 154 Comm: python3 Not tainted 6.4.0-rc4-00190-gc308e9ec0047 #7 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:skb_panic (net/core/skbuff.c:200) Code: 4f 70 50 8b 87 bc 00 00 00 50 8b 87 b8 00 00 00 50 ff b7 c8 00 00 00 4c 8b 8f c0 00 00 00 48 c7 c7 80 6e 77 82 e8 ad 8b 60 ff <0f> 0b 66 66 2e 0f 1f 84 00 00 00 00 00 90 90 90 90 90 90 90 90 90 RSP: 0018:ffffc90000003da0 EFLAGS: 00000246 RAX: 0000000000000085 RBX: ffff8880058a6600 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff88807dc1c540 RDI: ffff88807dc1c540 RBP: ffffc90000003e48 R08: ffffffff82b392c8 R09: 00000000ffffdfff R10: ffffffff82a592e0 R11: ffffffff82b092e0 R12: ffff888005b1c800 R13: ffff8880070b51b8 R14: ffff888005b1ca18 R15: ffff8880070b5190 FS: 00007f4539f0b740(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055670baf3000 CR3: 0000000005b0e000 CR4: 00000000007506f0 PKRU: 55555554 Call Trace: <IRQ> skb_push (net/core/skbuff.c:210) ipv6_rthdr_rcv (./include/linux/skbuff.h:2880 net/ipv6/exthdrs.c:634 net/ipv6/exthdrs.c:718) ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:437 (discriminator 5)) ip6_input_finish (./include/linux/rcupdate.h:805 net/ipv6/ip6_input.c:483) __netif_receive_skb_one_core (net/core/dev.c:5494) process_backlog (./include/linux/rcupdate.h:805 net/core/dev.c:5934) __napi_poll (net/core/dev.c:6496) net_rx_action (net/core/dev.c:6565 net/core/dev.c:6696) __do_softirq (./arch/x86/include/asm/jump_label.h:27 ./include/linux/jump_label.h:207 ./include/trace/events/irq.h:142 kernel/softirq.c:572) do_softirq (kernel/softirq.c:472 kernel/softirq.c:459) </IRQ> <TASK> __local_bh_enable_ip (kernel/softirq.c:396) __dev_queue_xmit (net/core/dev.c:4272) ip6_finish_output2 (./include/net/neighbour.h:544 net/ipv6/ip6_output.c:134) rawv6_sendmsg (./include/net/dst.h:458 ./include/linux/netfilter.h:303 net/ipv6/raw.c:656 net/ipv6/raw.c:914) sock_sendmsg (net/socket.c:724 net/socket.c:747) __sys_sendto (net/socket.c:2144) __x64_sys_sendto (net/socket.c:2156 net/socket.c:2152 net/socket.c:2152) do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) RIP: 0033:0x7f453a138aea Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 7e c3 0f 1f 44 00 00 41 54 48 83 ec 30 44 89 RSP: 002b:00007ffcc212a1c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00007ffcc212a288 RCX: 00007f453a138aea RDX: 0000000000000060 RSI: 00007f4539084c20 RDI: 0000000000000003 RBP: 00007f4538308e80 R08: 00007ffcc212a300 R09: 000000000000001c R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: ffffffffc4653600 R14: 0000000000000001 R15: 00007f4539712d1b </TASK> Modules linked in:
Fixes: 8610c7c6e3bd ("net: ipv6: add support for rpl sr exthdr") Reported-by: Max VA Closes: https://www.interruptlabs.co.uk/articles/linux-ipv6-route-of-death Signed-off-by: Kuniyuki Iwashima kuniyu@amazon.com Reviewed-by: Eric Dumazet edumazet@google.com Link: https://lore.kernel.org/r/20230605180617.67284-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- include/net/rpl.h | 3 --- net/ipv6/exthdrs.c | 29 +++++++++++------------------ 2 files changed, 11 insertions(+), 21 deletions(-)
diff --git a/include/net/rpl.h b/include/net/rpl.h index 308ef0a05caef..30fe780d1e7c8 100644 --- a/include/net/rpl.h +++ b/include/net/rpl.h @@ -23,9 +23,6 @@ static inline int rpl_init(void) static inline void rpl_exit(void) {} #endif
-/* Worst decompression memory usage ipv6 address (16) + pad 7 */ -#define IPV6_RPL_SRH_WORST_SWAP_SIZE (sizeof(struct in6_addr) + 7) - size_t ipv6_rpl_srh_size(unsigned char n, unsigned char cmpri, unsigned char cmpre);
diff --git a/net/ipv6/exthdrs.c b/net/ipv6/exthdrs.c index 4932dea9820ba..cdad9019c77c4 100644 --- a/net/ipv6/exthdrs.c +++ b/net/ipv6/exthdrs.c @@ -552,24 +552,6 @@ static int ipv6_rpl_srh_rcv(struct sk_buff *skb) return -1; }
- if (skb_cloned(skb)) { - if (pskb_expand_head(skb, IPV6_RPL_SRH_WORST_SWAP_SIZE, 0, - GFP_ATOMIC)) { - __IP6_INC_STATS(net, ip6_dst_idev(skb_dst(skb)), - IPSTATS_MIB_OUTDISCARDS); - kfree_skb(skb); - return -1; - } - } else { - err = skb_cow_head(skb, IPV6_RPL_SRH_WORST_SWAP_SIZE); - if (unlikely(err)) { - kfree_skb(skb); - return -1; - } - } - - hdr = (struct ipv6_rpl_sr_hdr *)skb_transport_header(skb); - if (!pskb_may_pull(skb, ipv6_rpl_srh_size(n, hdr->cmpri, hdr->cmpre))) { kfree_skb(skb); @@ -615,6 +597,17 @@ static int ipv6_rpl_srh_rcv(struct sk_buff *skb) skb_pull(skb, ((hdr->hdrlen + 1) << 3)); skb_postpull_rcsum(skb, oldhdr, sizeof(struct ipv6hdr) + ((hdr->hdrlen + 1) << 3)); + if (unlikely(!hdr->segments_left)) { + if (pskb_expand_head(skb, sizeof(struct ipv6hdr) + ((chdr->hdrlen + 1) << 3), 0, + GFP_ATOMIC)) { + __IP6_INC_STATS(net, ip6_dst_idev(skb_dst(skb)), IPSTATS_MIB_OUTDISCARDS); + kfree_skb(skb); + kfree(buf); + return -1; + } + + oldhdr = ipv6_hdr(skb); + } skb_push(skb, ((chdr->hdrlen + 1) << 3) + sizeof(struct ipv6hdr)); skb_reset_network_header(skb); skb_mac_header_rebuild(skb);
From: Eric Dumazet edumazet@google.com
[ Upstream commit 1e5c647c3f6d4f8497dedcd226204e1880e0ffb3 ]
Add READ_ONCE()/WRITE_ONCE() on accesses to sk->sk_rxhash.
This also prevents a (smart ?) compiler to remove the condition in:
if (sk->sk_rxhash != newval) sk->sk_rxhash = newval;
We need the condition to avoid dirtying a shared cache line.
Fixes: fec5e652e58f ("rfs: Receive Flow Steering") Signed-off-by: Eric Dumazet edumazet@google.com Reviewed-by: Simon Horman simon.horman@corigine.com Reviewed-by: Kuniyuki Iwashima kuniyu@amazon.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- include/net/sock.h | 18 +++++++++++++----- 1 file changed, 13 insertions(+), 5 deletions(-)
diff --git a/include/net/sock.h b/include/net/sock.h index 3da0601b573ed..51b499d745499 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -1073,8 +1073,12 @@ static inline void sock_rps_record_flow(const struct sock *sk) * OR an additional socket flag * [1] : sk_state and sk_prot are in the same cache line. */ - if (sk->sk_state == TCP_ESTABLISHED) - sock_rps_record_flow_hash(sk->sk_rxhash); + if (sk->sk_state == TCP_ESTABLISHED) { + /* This READ_ONCE() is paired with the WRITE_ONCE() + * from sock_rps_save_rxhash() and sock_rps_reset_rxhash(). + */ + sock_rps_record_flow_hash(READ_ONCE(sk->sk_rxhash)); + } } #endif } @@ -1083,15 +1087,19 @@ static inline void sock_rps_save_rxhash(struct sock *sk, const struct sk_buff *skb) { #ifdef CONFIG_RPS - if (unlikely(sk->sk_rxhash != skb->hash)) - sk->sk_rxhash = skb->hash; + /* The following WRITE_ONCE() is paired with the READ_ONCE() + * here, and another one in sock_rps_record_flow(). + */ + if (unlikely(READ_ONCE(sk->sk_rxhash) != skb->hash)) + WRITE_ONCE(sk->sk_rxhash, skb->hash); #endif }
static inline void sock_rps_reset_rxhash(struct sock *sk) { #ifdef CONFIG_RPS - sk->sk_rxhash = 0; + /* Paired with READ_ONCE() in sock_rps_record_flow() */ + WRITE_ONCE(sk->sk_rxhash, 0); #endif }
From: Eric Dumazet edumazet@google.com
[ Upstream commit 5c3b74a92aa285a3df722bf6329ba7ccf70346d6 ]
Add READ_ONCE()/WRITE_ONCE() on accesses to the sock flow table.
This also prevents a (smart ?) compiler to remove the condition in:
if (table->ents[index] != newval) table->ents[index] = newval;
We need the condition to avoid dirtying a shared cache line.
Fixes: fec5e652e58f ("rfs: Receive Flow Steering") Signed-off-by: Eric Dumazet edumazet@google.com Reviewed-by: Simon Horman simon.horman@corigine.com Reviewed-by: Kuniyuki Iwashima kuniyu@amazon.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- include/linux/netdevice.h | 7 +++++-- net/core/dev.c | 6 ++++-- 2 files changed, 9 insertions(+), 4 deletions(-)
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 9ef63bc14b002..24fe2cd4b0e8d 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -744,8 +744,11 @@ static inline void rps_record_sock_flow(struct rps_sock_flow_table *table, /* We only give a hint, preemption can change CPU under us */ val |= raw_smp_processor_id();
- if (table->ents[index] != val) - table->ents[index] = val; + /* The following WRITE_ONCE() is paired with the READ_ONCE() + * here, and another one in get_rps_cpu(). + */ + if (READ_ONCE(table->ents[index]) != val) + WRITE_ONCE(table->ents[index], val); } }
diff --git a/net/core/dev.c b/net/core/dev.c index 29e6e11c481c6..f4aad9b00cc90 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -4385,8 +4385,10 @@ static int get_rps_cpu(struct net_device *dev, struct sk_buff *skb, u32 next_cpu; u32 ident;
- /* First check into global flow table if there is a match */ - ident = sock_flow_table->ents[hash & sock_flow_table->mask]; + /* First check into global flow table if there is a match. + * This READ_ONCE() pairs with WRITE_ONCE() from rps_record_sock_flow(). + */ + ident = READ_ONCE(sock_flow_table->ents[hash & sock_flow_table->mask]); if ((ident ^ hash) & ~rps_cpu_mask) goto try_rps;
From: Eric Dumazet edumazet@google.com
[ Upstream commit 886bc7d6ed3357975c5f1d3c784da96000d4bbb4 ]
rtm_tca_policy is used from net/sched/sch_api.c and net/sched/cls_api.c, thus should be declared in an include file.
This fixes the following sparse warning: net/sched/sch_api.c:1434:25: warning: symbol 'rtm_tca_policy' was not declared. Should it be static?
Fixes: e331473fee3d ("net/sched: cls_api: add missing validation of netlink attributes") Signed-off-by: Eric Dumazet edumazet@google.com Acked-by: Jamal Hadi Salim jhs@mojatatu.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- include/net/pkt_sched.h | 2 ++ net/sched/cls_api.c | 2 -- 2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/include/net/pkt_sched.h b/include/net/pkt_sched.h index 50d5ffbad473e..ba781e0aaf566 100644 --- a/include/net/pkt_sched.h +++ b/include/net/pkt_sched.h @@ -129,6 +129,8 @@ static inline void qdisc_run(struct Qdisc *q) } }
+extern const struct nla_policy rtm_tca_policy[TCA_MAX + 1]; + /* Calculate maximal size of packet seen by hard_start_xmit routine of this device. */ diff --git a/net/sched/cls_api.c b/net/sched/cls_api.c index 53d315ed94307..16960d9663e9e 100644 --- a/net/sched/cls_api.c +++ b/net/sched/cls_api.c @@ -41,8 +41,6 @@ #include <net/tc_act/tc_gate.h> #include <net/flow_offload.h>
-extern const struct nla_policy rtm_tca_policy[TCA_MAX + 1]; - /* The list of all installed classifier types */ static LIST_HEAD(tcf_proto_base);
From: Hangyu Hua hbh25y@gmail.com
[ Upstream commit 44f8baaf230c655c249467ca415b570deca8df77 ]
try_module_get will be called in tcf_proto_lookup_ops. So module_put needs to be called to drop the refcount if ops don't implement the required function.
Fixes: 9f407f1768d3 ("net: sched: introduce chain templates") Signed-off-by: Hangyu Hua hbh25y@gmail.com Reviewed-by: Larysa Zaremba larysa.zaremba@intel.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/sched/cls_api.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/net/sched/cls_api.c b/net/sched/cls_api.c index 16960d9663e9e..befe42aad04ba 100644 --- a/net/sched/cls_api.c +++ b/net/sched/cls_api.c @@ -2772,6 +2772,7 @@ static int tc_chain_tmplt_add(struct tcf_chain *chain, struct net *net, return PTR_ERR(ops); if (!ops->tmplt_create || !ops->tmplt_destroy || !ops->tmplt_dump) { NL_SET_ERR_MSG(extack, "Chain templates are not supported with specified classifier"); + module_put(ops->owner); return -EOPNOTSUPP; }
From: Jiri Olsa jolsa@kernel.org
[ Upstream commit f46fab0e36e611a2389d3843f34658c849b6bd60 ]
Anastasios reported crash on stable 5.15 kernel with following BPF attached to lsm hook:
SEC("lsm.s/bprm_creds_for_exec") int BPF_PROG(bprm_creds_for_exec, struct linux_binprm *bprm) { struct path *path = &bprm->executable->f_path; char p[128] = { 0 };
bpf_d_path(path, p, 128); return 0; }
But bprm->executable can be NULL, so bpf_d_path call will crash:
BUG: kernel NULL pointer dereference, address: 0000000000000018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC NOPTI ... RIP: 0010:d_path+0x22/0x280 ... Call Trace: <TASK> bpf_d_path+0x21/0x60 bpf_prog_db9cf176e84498d9_bprm_creds_for_exec+0x94/0x99 bpf_trampoline_6442506293_0+0x55/0x1000 bpf_lsm_bprm_creds_for_exec+0x5/0x10 security_bprm_creds_for_exec+0x29/0x40 bprm_execve+0x1c1/0x900 do_execveat_common.isra.0+0x1af/0x260 __x64_sys_execve+0x32/0x40
It's problem for all stable trees with bpf_d_path helper, which was added in 5.9.
This issue is fixed in current bpf code, where we identify and mark trusted pointers, so the above code would fail even to load.
For the sake of the stable trees and to workaround potentially broken verifier in the future, adding the code that reads the path object from the passed pointer and verifies it's valid in kernel space.
Fixes: 6e22ab9da793 ("bpf: Add d_path helper") Reported-by: Anastasios Papagiannis tasos.papagiannnis@gmail.com Suggested-by: Alexei Starovoitov ast@kernel.org Signed-off-by: Jiri Olsa jolsa@kernel.org Signed-off-by: Daniel Borkmann daniel@iogearbox.net Acked-by: Stanislav Fomichev sdf@google.com Acked-by: Yonghong Song yhs@fb.com Link: https://lore.kernel.org/bpf/20230606181714.532998-1-jolsa@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/trace/bpf_trace.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/kernel/trace/bpf_trace.c b/kernel/trace/bpf_trace.c index 94e51d36fb497..9e90d1e7af2c8 100644 --- a/kernel/trace/bpf_trace.c +++ b/kernel/trace/bpf_trace.c @@ -1128,13 +1128,23 @@ static const struct bpf_func_proto bpf_send_signal_thread_proto = {
BPF_CALL_3(bpf_d_path, struct path *, path, char *, buf, u32, sz) { + struct path copy; long len; char *p;
if (!sz) return 0;
- p = d_path(path, buf, sz); + /* + * The path pointer is verified as trusted and safe to use, + * but let's double check it's valid anyway to workaround + * potentially broken verifier. + */ + len = copy_from_kernel_nofault(©, path, sizeof(*path)); + if (len < 0) + return len; + + p = d_path(©, buf, sz); if (IS_ERR(p)) { len = PTR_ERR(p); } else {
From: Ben Hutchings ben@decadent.org.uk
[ Upstream commit 7c5d4801ecf0564c860033d89726b99723c55146 ]
irq_cpu_rmap_release() calls cpu_rmap_put(), which may free the rmap. So we need to clear the pointer to our glue structure in rmap before doing that, not after.
Fixes: 4e0473f1060a ("lib: cpu_rmap: Avoid use after free on rmap->obj array entries") Signed-off-by: Ben Hutchings ben@decadent.org.uk Reviewed-by: Simon Horman simon.horman@corigine.com Link: https://lore.kernel.org/r/ZHo0vwquhOy3FaXc@decadent.org.uk Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- lib/cpu_rmap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/lib/cpu_rmap.c b/lib/cpu_rmap.c index e77f12bb3c774..1833ad73de6fc 100644 --- a/lib/cpu_rmap.c +++ b/lib/cpu_rmap.c @@ -268,8 +268,8 @@ static void irq_cpu_rmap_release(struct kref *ref) struct irq_glue *glue = container_of(ref, struct irq_glue, notify.kref);
- cpu_rmap_put(glue->rmap); glue->rmap->obj[glue->index] = NULL; + cpu_rmap_put(glue->rmap); kfree(glue); }
From: Sreekanth Reddy sreekanth.reddy@broadcom.com
[ Upstream commit 1d997801c7cc6a7f542e46d5a6bf16f893ad3fe9 ]
Only older NIC controller's firmware uses the PROC AP reset type. Firmware on 5731X/5741X and newer chips does not support this reset type. When bnxt_reset() issues a series of resets, this PROC AP reset may actually fail on these newer chips because the firmware is not ready to accept this unsupported command yet. Avoid this unnecessary error by skipping this reset type on chips that don't support it.
Fixes: 7a13240e3718 ("bnxt_en: fix ethtool_reset_flags ABI violations") Reviewed-by: Pavan Chebbi pavan.chebbi@broadcom.com Signed-off-by: Sreekanth Reddy sreekanth.reddy@broadcom.com Signed-off-by: Michael Chan michael.chan@broadcom.com Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c index 1e67e86fc3344..2984234df67eb 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_ethtool.c @@ -3440,7 +3440,7 @@ static int bnxt_reset(struct net_device *dev, u32 *flags) } }
- if (req & BNXT_FW_RESET_AP) { + if (!BNXT_CHIP_P4_PLUS(bp) && (req & BNXT_FW_RESET_AP)) { /* This feature is not supported in older firmware versions */ if (bp->hwrm_spec_code >= 0x10803) { if (!bnxt_firmware_reset_ap(dev)) {
From: Somnath Kotur somnath.kotur@broadcom.com
[ Upstream commit 1a9e4f501bc6ff1b6ecb60df54fbf2b54db43bfe ]
We need to call bnxt_hwrm_func_qcfg() on a VF to query the default VLAN that may be setup by the PF. If a default VLAN is enabled, the VF cannot support VLAN acceleration on the receive side and the VNIC must be setup to strip out the default VLAN tag. If a default VLAN is not enabled, the VF can support VLAN acceleration on the receive side. The VNIC should be set up to strip or not strip the VLAN based on the RX VLAN acceleration setting.
Without this call to determine the default VLAN before calling bnxt_setup_vnic(), the VNIC may not be set up correctly. For example, bnxt_setup_vnic() may set up to strip the VLAN tag based on stale default VLAN information. If RX VLAN acceleration is not enabled, the VLAN tag will be incorrectly stripped and the RX data path will not work correctly.
Fixes: cf6645f8ebc6 ("bnxt_en: Add function for VF driver to query default VLAN.") Reviewed-by: Pavan Chebbi pavan.chebbi@broadcom.com Signed-off-by: Somnath Kotur somnath.kotur@broadcom.com Signed-off-by: Michael Chan michael.chan@broadcom.com Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index 3a9fcf942a6de..127ed119b5f71 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -8337,6 +8337,9 @@ static int bnxt_init_chip(struct bnxt *bp, bool irq_re_init) goto err_out; }
+ if (BNXT_VF(bp)) + bnxt_hwrm_func_qcfg(bp); + rc = bnxt_setup_vnic(bp, 0); if (rc) goto err_out;
From: Somnath Kotur somnath.kotur@broadcom.com
[ Upstream commit 1eb4ef12591348c440ac9d6efcf7521e73cf2b10 ]
As per the new udp tunnel framework, drivers which need to know the details of a port entry (i.e. port type) when it gets deleted should use the .set_port / .unset_port callbacks.
Implementing the current .udp_tunnel_sync callback would mean that the deleted tunnel port entry would be all zeros. This used to work on older firmware because it would not check the input when deleting a tunnel port. With newer firmware, the delete will now fail and subsequent tunnel port allocation will fail as a result.
Fixes: 442a35a5a7aa ("bnxt: convert to new udp_tunnel_nic infra") Reviewed-by: Kalesh Anakkur Purayil kalesh-anakkur.purayil@broadcom.com Signed-off-by: Somnath Kotur somnath.kotur@broadcom.com Signed-off-by: Michael Chan michael.chan@broadcom.com Signed-off-by: Paolo Abeni pabeni@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/broadcom/bnxt/bnxt.c | 25 ++++++++++++++++------- 1 file changed, 18 insertions(+), 7 deletions(-)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c index 127ed119b5f71..d8366351cf14a 100644 --- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c @@ -12104,26 +12104,37 @@ static void bnxt_cfg_ntp_filters(struct bnxt *bp)
#endif /* CONFIG_RFS_ACCEL */
-static int bnxt_udp_tunnel_sync(struct net_device *netdev, unsigned int table) +static int bnxt_udp_tunnel_set_port(struct net_device *netdev, unsigned int table, + unsigned int entry, struct udp_tunnel_info *ti) { struct bnxt *bp = netdev_priv(netdev); - struct udp_tunnel_info ti; unsigned int cmd;
- udp_tunnel_nic_get_port(netdev, table, 0, &ti); - if (ti.type == UDP_TUNNEL_TYPE_VXLAN) + if (ti->type == UDP_TUNNEL_TYPE_VXLAN) cmd = TUNNEL_DST_PORT_FREE_REQ_TUNNEL_TYPE_VXLAN; else cmd = TUNNEL_DST_PORT_FREE_REQ_TUNNEL_TYPE_GENEVE;
- if (ti.port) - return bnxt_hwrm_tunnel_dst_port_alloc(bp, ti.port, cmd); + return bnxt_hwrm_tunnel_dst_port_alloc(bp, ti->port, cmd); +} + +static int bnxt_udp_tunnel_unset_port(struct net_device *netdev, unsigned int table, + unsigned int entry, struct udp_tunnel_info *ti) +{ + struct bnxt *bp = netdev_priv(netdev); + unsigned int cmd; + + if (ti->type == UDP_TUNNEL_TYPE_VXLAN) + cmd = TUNNEL_DST_PORT_FREE_REQ_TUNNEL_TYPE_VXLAN; + else + cmd = TUNNEL_DST_PORT_FREE_REQ_TUNNEL_TYPE_GENEVE;
return bnxt_hwrm_tunnel_dst_port_free(bp, cmd); }
static const struct udp_tunnel_nic_info bnxt_udp_tunnels = { - .sync_table = bnxt_udp_tunnel_sync, + .set_port = bnxt_udp_tunnel_set_port, + .unset_port = bnxt_udp_tunnel_unset_port, .flags = UDP_TUNNEL_NIC_INFO_MAY_SLEEP | UDP_TUNNEL_NIC_INFO_OPEN_ONLY, .tables = {
From: Vladislav Efanov VEfanov@ispras.ru
commit abac3ac97fe8734b620e7322a116450d7f90aa43 upstream.
Syzkaller got a lot of crashes like: KASAN: use-after-free Write in *_timers*
All of these crashes point to the same memory area:
The buggy address belongs to the object at ffff88801f870000 which belongs to the cache kmalloc-8k of size 8192 The buggy address is located 5320 bytes inside of 8192-byte region [ffff88801f870000, ffff88801f872000)
This area belongs to : batadv_priv->batadv_priv_dat->delayed_work->timer_list
The reason for these issues is the lack of synchronization. Delayed work (batadv_dat_purge) schedules new timer/work while the device is being deleted. As the result new timer/delayed work is set after cancel_delayed_work_sync() was called. So after the device is freed the timer list contains pointer to already freed memory.
Found by Linux Verification Center (linuxtesting.org) with syzkaller.
Cc: stable@kernel.org Fixes: 2f1dfbe18507 ("batman-adv: Distributed ARP Table - implement local storage") Signed-off-by: Vladislav Efanov VEfanov@ispras.ru Acked-by: Sven Eckelmann sven@narfation.org Signed-off-by: Simon Wunderlich sw@simonwunderlich.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/batman-adv/distributed-arp-table.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/net/batman-adv/distributed-arp-table.c +++ b/net/batman-adv/distributed-arp-table.c @@ -102,7 +102,6 @@ static void batadv_dat_purge(struct work */ static void batadv_dat_start_timer(struct batadv_priv *bat_priv) { - INIT_DELAYED_WORK(&bat_priv->dat.work, batadv_dat_purge); queue_delayed_work(batadv_event_workqueue, &bat_priv->dat.work, msecs_to_jiffies(10000)); } @@ -822,6 +821,7 @@ int batadv_dat_init(struct batadv_priv * if (!bat_priv->dat.hash) return -ENOMEM;
+ INIT_DELAYED_WORK(&bat_priv->dat.work, batadv_dat_purge); batadv_dat_start_timer(bat_priv);
batadv_tvlv_handler_register(bat_priv, batadv_dat_tvlv_ogm_handler_v1,
From: Ismael Ferreras Morezuelas swyterzone@gmail.com
commit feee70f4568650cf44c573488798ffc0a2faeea3 upstream.
While doing my research to improve the xpad device names I noticed that the 1532:0037 VID/PID seems to be used by the DeathAdder 2013, so that Razer Sabertooth instance looked wrong and very suspect to me. I didn't see any mention in the official drivers, either.
After doing more research, it turns out that the xpad list is used by many other projects (like Steam) as-is [1], this issue was reported [2] and Valve/Sam Lantinga fixed it [3]:
[1]: https://github.com/libsdl-org/SDL/blob/dcc5eef0e2395854b254ea2873a4899edab34... [2]: https://steamcommunity.com/app/353380/discussions/0/1743392486228754770/ [3]: https://hg.libsdl.org/SDL/rev/29809f6f0271
(With multiple Internet users reporting similar issues, not linked here)
After not being able to find the correct VID/PID combination anywhere on the Internet and not receiving any reply from Razer support I did some additional detective work, it seems like it presents itself as "Razer Sabertooth Gaming Controller (XBOX360)", code 1689:FE00.
Leaving us with this: * Razer Sabertooth (1689:fe00) * Razer Sabertooth Elite (24c6:5d04) * Razer DeathAdder 2013 (1532:0037) [note: not a gamepad]
So, to sum things up; remove this conflicting/duplicate entry:
{ 0x1532, 0x0037, "Razer Sabertooth", 0, XTYPE_XBOX360 },
As the real/correct one is already present there, even if the Internet as a whole insists on presenting it as the Razer Sabertooth Elite, which (by all accounts) is not:
{ 0x1689, 0xfe00, "Razer Sabertooth", 0, XTYPE_XBOX360 },
Actual change in SDL2 referencing this kernel issue: https://github.com/libsdl-org/SDL/commit/e5e54169754ca5d3e86339d968b20126d9d...
For more information of the device, take a look here: https://github.com/xboxdrv/xboxdrv/pull/59
You can see a lsusb dump here: https://github.com/xboxdrv/xboxdrv/files/76581/Qa6dBcrv.txt
Fixes: f554f619b70 ("Input: xpad - sync device IDs with xboxdrv") Signed-off-by: Ismael Ferreras Morezuelas swyterzone@gmail.com Reviewed-by: Cameron Gutman aicommander@gmail.com Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/5c12dbdb-5774-fc68-5c58-ca596383663e@gmail.com Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/input/joystick/xpad.c | 1 - 1 file changed, 1 deletion(-)
--- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -262,7 +262,6 @@ static const struct xpad_device { { 0x1430, 0xf801, "RedOctane Controller", 0, XTYPE_XBOX360 }, { 0x146b, 0x0601, "BigBen Interactive XBOX 360 Controller", 0, XTYPE_XBOX360 }, { 0x146b, 0x0604, "Bigben Interactive DAIJA Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, - { 0x1532, 0x0037, "Razer Sabertooth", 0, XTYPE_XBOX360 }, { 0x1532, 0x0a00, "Razer Atrox Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE }, { 0x1532, 0x0a03, "Razer Wildcat", 0, XTYPE_XBOXONE }, { 0x15e4, 0x3f00, "Power A Mini Pro Elite", 0, XTYPE_XBOX360 },
From: Dmitry Torokhov dmitry.torokhov@gmail.com
commit 7b63a88bb62ba2ddf5fcd956be85fe46624628b9 upstream.
The kernel only allocate 5 MT slots; check that transmitted slot ID falls within the acceptable range.
Link: https://lore.kernel.org/r/ZFnEL91nrT789dbG@google.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/input/mouse/elantech.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)
--- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -674,10 +674,11 @@ static void process_packet_head_v4(struc struct input_dev *dev = psmouse->dev; struct elantech_data *etd = psmouse->private; unsigned char *packet = psmouse->packet; - int id = ((packet[3] & 0xe0) >> 5) - 1; + int id; int pres, traces;
- if (id < 0) + id = ((packet[3] & 0xe0) >> 5) - 1; + if (id < 0 || id >= ETP_MAX_FINGERS) return;
etd->mt[id].x = ((packet[1] & 0x0f) << 8) | packet[2]; @@ -707,7 +708,7 @@ static void process_packet_motion_v4(str int id, sid;
id = ((packet[0] & 0xe0) >> 5) - 1; - if (id < 0) + if (id < 0 || id >= ETP_MAX_FINGERS) return;
sid = ((packet[3] & 0xe0) >> 5) - 1; @@ -728,7 +729,7 @@ static void process_packet_motion_v4(str input_report_abs(dev, ABS_MT_POSITION_X, etd->mt[id].x); input_report_abs(dev, ABS_MT_POSITION_Y, etd->mt[id].y);
- if (sid >= 0) { + if (sid >= 0 && sid < ETP_MAX_FINGERS) { etd->mt[sid].x += delta_x2 * weight; etd->mt[sid].y -= delta_y2 * weight; input_mt_slot(dev, sid);
From: Ai Chao aichao@kylinos.cn
commit 527c356b51f3ddee02c9ed5277538f85e30a2cdc upstream.
Add a quirk for HP Slim Desktop S01 to fixup headset MIC no presence.
Signed-off-by: Ai Chao aichao@kylinos.cn Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230526094704.14597-1-aichao@kylinos.cn Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+)
--- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -11162,6 +11162,7 @@ static const struct snd_pci_quirk alc662 SND_PCI_QUIRK(0x103c, 0x8719, "HP", ALC897_FIXUP_HP_HSMIC_VERB), SND_PCI_QUIRK(0x103c, 0x872b, "HP", ALC897_FIXUP_HP_HSMIC_VERB), SND_PCI_QUIRK(0x103c, 0x873e, "HP", ALC671_FIXUP_HP_HEADSET_MIC2), + SND_PCI_QUIRK(0x103c, 0x8768, "HP Slim Desktop S01", ALC671_FIXUP_HP_HEADSET_MIC2), SND_PCI_QUIRK(0x103c, 0x877e, "HP 288 Pro G6", ALC671_FIXUP_HP_HEADSET_MIC2), SND_PCI_QUIRK(0x103c, 0x885f, "HP 288 Pro G8", ALC671_FIXUP_HP_HEADSET_MIC2), SND_PCI_QUIRK(0x1043, 0x1080, "Asus UX501VW", ALC668_FIXUP_HEADSET_MODE),
From: RenHai kean0048@gmail.com
commit 7ca4c8d4d3f41c2cd9b4cf22bb829bf03dac0956 upstream.
Headset microphone on this platform does not work without ALC897_FIXUP_HEADSET_MIC_PIN fixup.
Signed-off-by: RenHai kean0048@gmail.com Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230602003604.975892-1-kean0048@gmail.com Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+)
--- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -11184,6 +11184,7 @@ static const struct snd_pci_quirk alc662 SND_PCI_QUIRK(0x14cd, 0x5003, "USI", ALC662_FIXUP_USI_HEADSET_MODE), SND_PCI_QUIRK(0x17aa, 0x1036, "Lenovo P520", ALC662_FIXUP_LENOVO_MULTI_CODECS), SND_PCI_QUIRK(0x17aa, 0x1057, "Lenovo P360", ALC897_FIXUP_HEADSET_MIC_PIN), + SND_PCI_QUIRK(0x17aa, 0x1064, "Lenovo P3 Tower", ALC897_FIXUP_HEADSET_MIC_PIN), SND_PCI_QUIRK(0x17aa, 0x32ca, "Lenovo ThinkCentre M80", ALC897_FIXUP_HEADSET_MIC_PIN), SND_PCI_QUIRK(0x17aa, 0x32cb, "Lenovo ThinkCentre M70", ALC897_FIXUP_HEADSET_MIC_PIN), SND_PCI_QUIRK(0x17aa, 0x32cf, "Lenovo ThinkCentre M950", ALC897_FIXUP_HEADSET_MIC_PIN),
From: Chia-I Wu olvaffe@gmail.com
commit b447b079cf3a9971ea4d31301e673f49612ccc18 upstream.
According to Alex, most APUs from that time seem to have the same issue (vbios says 48Mhz, actual is 100Mhz). I only have a CHIP_STONEY so I limit the fixup to CHIP_STONEY
Signed-off-by: Chia-I Wu olvaffe@gmail.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/gpu/drm/amd/amdgpu/vi.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-)
--- a/drivers/gpu/drm/amd/amdgpu/vi.c +++ b/drivers/gpu/drm/amd/amdgpu/vi.c @@ -329,8 +329,15 @@ static u32 vi_get_xclk(struct amdgpu_dev u32 reference_clock = adev->clock.spll.reference_freq; u32 tmp;
- if (adev->flags & AMD_IS_APU) - return reference_clock; + if (adev->flags & AMD_IS_APU) { + switch (adev->asic_type) { + case CHIP_STONEY: + /* vbios says 48Mhz, but the actual freq is 100Mhz */ + return 10000; + default: + return reference_clock; + } + }
tmp = RREG32_SMC(ixCG_CLKPIN_CNTL_2); if (REG_GET_FIELD(tmp, CG_CLKPIN_CNTL_2, MUX_TCLK_TO_XCLK))
From: Oleksij Rempel o.rempel@pengutronix.de
commit 2a84aea80e925ecba6349090559754f8e8eb68ef upstream.
This patch addresses an issue within the j1939_sk_send_loop_abort() function in the j1939/socket.c file, specifically in the context of Transport Protocol (TP) sessions.
Without this patch, when a TP session is initiated and a Clear To Send (CTS) frame is received from the remote side requesting one data packet, the kernel dispatches the first Data Transport (DT) frame and then waits for the next CTS. If the remote side doesn't respond with another CTS, the kernel aborts due to a timeout. This leads to the user-space receiving an EPOLLERR on the socket, and the socket becomes active.
However, when trying to read the error queue from the socket with sock.recvmsg(, , socket.MSG_ERRQUEUE), it returns -EAGAIN, given that the socket is non-blocking. This situation results in an infinite loop: the user-space repeatedly calls epoll(), epoll() returns the socket file descriptor with EPOLLERR, but the socket then blocks on the recv() of ERRQUEUE.
This patch introduces an additional check for the J1939_SOCK_ERRQUEUE flag within the j1939_sk_send_loop_abort() function. If the flag is set, it indicates that the application has subscribed to receive error queue messages. In such cases, the kernel can communicate the current transfer state via the error queue. This allows for the function to return early, preventing the unnecessary setting of the socket into an error state, and breaking the infinite loop. It is crucial to note that a socket error is only needed if the application isn't using the error queue, as, without it, the application wouldn't be aware of transfer issues.
Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Reported-by: David Jander david@protonic.nl Tested-by: David Jander david@protonic.nl Signed-off-by: Oleksij Rempel o.rempel@pengutronix.de Link: https://lore.kernel.org/r/20230526081946.715190-1-o.rempel@pengutronix.de Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde mkl@pengutronix.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/can/j1939/socket.c | 5 +++++ 1 file changed, 5 insertions(+)
--- a/net/can/j1939/socket.c +++ b/net/can/j1939/socket.c @@ -1013,6 +1013,11 @@ void j1939_sk_errqueue(struct j1939_sess
void j1939_sk_send_loop_abort(struct sock *sk, int err) { + struct j1939_sock *jsk = j1939_sk(sk); + + if (jsk->state & J1939_SOCK_ERRQUEUE) + return; + sk->sk_err = err;
sk->sk_error_report(sk);
From: Fedor Pchelkin pchelkin@ispras.ru
commit cd9c790de2088b0d797dc4d244b4f174f9962554 upstream.
It turns out access to j1939_can_rx_register() needs to be serialized, otherwise j1939_priv can be corrupted when parallel threads call j1939_netdev_start() and j1939_can_rx_register() fails. This issue is thoroughly covered in other commit which serializes access to j1939_can_rx_register().
Change j1939_netdev_lock type to mutex so that we do not need to remove GFP_KERNEL from can_rx_register().
j1939_netdev_lock seems to be used in normal contexts where mutex usage is not prohibited.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Suggested-by: Alexey Khoroshilov khoroshilov@ispras.ru Signed-off-by: Fedor Pchelkin pchelkin@ispras.ru Tested-by: Oleksij Rempel o.rempel@pengutronix.de Acked-by: Oleksij Rempel o.rempel@pengutronix.de Link: https://lore.kernel.org/r/20230526171910.227615-2-pchelkin@ispras.ru Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde mkl@pengutronix.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/can/j1939/main.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-)
--- a/net/can/j1939/main.c +++ b/net/can/j1939/main.c @@ -122,7 +122,7 @@ static void j1939_can_recv(struct sk_buf #define J1939_CAN_ID CAN_EFF_FLAG #define J1939_CAN_MASK (CAN_EFF_FLAG | CAN_RTR_FLAG)
-static DEFINE_SPINLOCK(j1939_netdev_lock); +static DEFINE_MUTEX(j1939_netdev_lock);
static struct j1939_priv *j1939_priv_create(struct net_device *ndev) { @@ -216,7 +216,7 @@ static void __j1939_rx_release(struct kr j1939_can_rx_unregister(priv); j1939_ecu_unmap_all(priv); j1939_priv_set(priv->ndev, NULL); - spin_unlock(&j1939_netdev_lock); + mutex_unlock(&j1939_netdev_lock); }
/* get pointer to priv without increasing ref counter */ @@ -244,9 +244,9 @@ static struct j1939_priv *j1939_priv_get { struct j1939_priv *priv;
- spin_lock(&j1939_netdev_lock); + mutex_lock(&j1939_netdev_lock); priv = j1939_priv_get_by_ndev_locked(ndev); - spin_unlock(&j1939_netdev_lock); + mutex_unlock(&j1939_netdev_lock);
return priv; } @@ -256,14 +256,14 @@ struct j1939_priv *j1939_netdev_start(st struct j1939_priv *priv, *priv_new; int ret;
- spin_lock(&j1939_netdev_lock); + mutex_lock(&j1939_netdev_lock); priv = j1939_priv_get_by_ndev_locked(ndev); if (priv) { kref_get(&priv->rx_kref); - spin_unlock(&j1939_netdev_lock); + mutex_unlock(&j1939_netdev_lock); return priv; } - spin_unlock(&j1939_netdev_lock); + mutex_unlock(&j1939_netdev_lock);
priv = j1939_priv_create(ndev); if (!priv) @@ -273,20 +273,20 @@ struct j1939_priv *j1939_netdev_start(st spin_lock_init(&priv->j1939_socks_lock); INIT_LIST_HEAD(&priv->j1939_socks);
- spin_lock(&j1939_netdev_lock); + mutex_lock(&j1939_netdev_lock); priv_new = j1939_priv_get_by_ndev_locked(ndev); if (priv_new) { /* Someone was faster than us, use their priv and roll * back our's. */ kref_get(&priv_new->rx_kref); - spin_unlock(&j1939_netdev_lock); + mutex_unlock(&j1939_netdev_lock); dev_put(ndev); kfree(priv); return priv_new; } j1939_priv_set(ndev, priv); - spin_unlock(&j1939_netdev_lock); + mutex_unlock(&j1939_netdev_lock);
ret = j1939_can_rx_register(priv); if (ret < 0) @@ -304,7 +304,7 @@ struct j1939_priv *j1939_netdev_start(st
void j1939_netdev_stop(struct j1939_priv *priv) { - kref_put_lock(&priv->rx_kref, __j1939_rx_release, &j1939_netdev_lock); + kref_put_mutex(&priv->rx_kref, __j1939_rx_release, &j1939_netdev_lock); j1939_priv_put(priv); }
From: Fedor Pchelkin pchelkin@ispras.ru
commit 9f16eb106aa5fce15904625661312623ec783ed3 upstream.
Syzkaller reports the following failure:
BUG: KASAN: use-after-free in kref_put include/linux/kref.h:64 [inline] BUG: KASAN: use-after-free in j1939_priv_put+0x25/0xa0 net/can/j1939/main.c:172 Write of size 4 at addr ffff888141c15058 by task swapper/3/0
CPU: 3 PID: 0 Comm: swapper/3 Not tainted 5.10.144-syzkaller #0 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x107/0x167 lib/dump_stack.c:118 print_address_description.constprop.0+0x1c/0x220 mm/kasan/report.c:385 __kasan_report mm/kasan/report.c:545 [inline] kasan_report.cold+0x1f/0x37 mm/kasan/report.c:562 check_memory_region_inline mm/kasan/generic.c:186 [inline] check_memory_region+0x145/0x190 mm/kasan/generic.c:192 instrument_atomic_read_write include/linux/instrumented.h:101 [inline] atomic_fetch_sub_release include/asm-generic/atomic-instrumented.h:220 [inline] __refcount_sub_and_test include/linux/refcount.h:272 [inline] __refcount_dec_and_test include/linux/refcount.h:315 [inline] refcount_dec_and_test include/linux/refcount.h:333 [inline] kref_put include/linux/kref.h:64 [inline] j1939_priv_put+0x25/0xa0 net/can/j1939/main.c:172 j1939_sk_sock_destruct+0x44/0x90 net/can/j1939/socket.c:374 __sk_destruct+0x4e/0x820 net/core/sock.c:1784 rcu_do_batch kernel/rcu/tree.c:2485 [inline] rcu_core+0xb35/0x1a30 kernel/rcu/tree.c:2726 __do_softirq+0x289/0x9a3 kernel/softirq.c:298 asm_call_irq_on_stack+0x12/0x20 </IRQ> __run_on_irqstack arch/x86/include/asm/irq_stack.h:26 [inline] run_on_irqstack_cond arch/x86/include/asm/irq_stack.h:77 [inline] do_softirq_own_stack+0xaa/0xe0 arch/x86/kernel/irq_64.c:77 invoke_softirq kernel/softirq.c:393 [inline] __irq_exit_rcu kernel/softirq.c:423 [inline] irq_exit_rcu+0x136/0x200 kernel/softirq.c:435 sysvec_apic_timer_interrupt+0x4d/0x100 arch/x86/kernel/apic/apic.c:1095 asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:635
Allocated by task 1141: kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48 kasan_set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc.constprop.0+0xc9/0xd0 mm/kasan/common.c:461 kmalloc include/linux/slab.h:552 [inline] kzalloc include/linux/slab.h:664 [inline] j1939_priv_create net/can/j1939/main.c:131 [inline] j1939_netdev_start+0x111/0x860 net/can/j1939/main.c:268 j1939_sk_bind+0x8ea/0xd30 net/can/j1939/socket.c:485 __sys_bind+0x1f2/0x260 net/socket.c:1645 __do_sys_bind net/socket.c:1656 [inline] __se_sys_bind net/socket.c:1654 [inline] __x64_sys_bind+0x6f/0xb0 net/socket.c:1654 do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x61/0xc6
Freed by task 1141: kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48 kasan_set_track+0x1c/0x30 mm/kasan/common.c:56 kasan_set_free_info+0x1b/0x30 mm/kasan/generic.c:355 __kasan_slab_free+0x112/0x170 mm/kasan/common.c:422 slab_free_hook mm/slub.c:1542 [inline] slab_free_freelist_hook+0xad/0x190 mm/slub.c:1576 slab_free mm/slub.c:3149 [inline] kfree+0xd9/0x3b0 mm/slub.c:4125 j1939_netdev_start+0x5ee/0x860 net/can/j1939/main.c:300 j1939_sk_bind+0x8ea/0xd30 net/can/j1939/socket.c:485 __sys_bind+0x1f2/0x260 net/socket.c:1645 __do_sys_bind net/socket.c:1656 [inline] __se_sys_bind net/socket.c:1654 [inline] __x64_sys_bind+0x6f/0xb0 net/socket.c:1654 do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x61/0xc6
It can be caused by this scenario:
CPU0 CPU1 j1939_sk_bind(socket0, ndev0, ...) j1939_netdev_start() j1939_sk_bind(socket1, ndev0, ...) j1939_netdev_start() mutex_lock(&j1939_netdev_lock) j1939_priv_set(ndev0, priv) mutex_unlock(&j1939_netdev_lock) if (priv_new) kref_get(&priv_new->rx_kref) return priv_new; /* inside j1939_sk_bind() */ jsk->priv = priv j1939_can_rx_register(priv) // fails j1939_priv_set(ndev, NULL) kfree(priv) j1939_sk_sock_destruct() j1939_priv_put() // <- uaf
To avoid this, call j1939_can_rx_register() under j1939_netdev_lock so that a concurrent thread cannot process j1939_priv before j1939_can_rx_register() returns.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Signed-off-by: Fedor Pchelkin pchelkin@ispras.ru Tested-by: Oleksij Rempel o.rempel@pengutronix.de Acked-by: Oleksij Rempel o.rempel@pengutronix.de Link: https://lore.kernel.org/r/20230526171910.227615-3-pchelkin@ispras.ru Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde mkl@pengutronix.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/can/j1939/main.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
--- a/net/can/j1939/main.c +++ b/net/can/j1939/main.c @@ -286,16 +286,18 @@ struct j1939_priv *j1939_netdev_start(st return priv_new; } j1939_priv_set(ndev, priv); - mutex_unlock(&j1939_netdev_lock);
ret = j1939_can_rx_register(priv); if (ret < 0) goto out_priv_put;
+ mutex_unlock(&j1939_netdev_lock); return priv;
out_priv_put: j1939_priv_set(ndev, NULL); + mutex_unlock(&j1939_netdev_lock); + dev_put(ndev); kfree(priv);
From: Xiubo Li xiubli@redhat.com
commit 409e873ea3c1fd3079909718bbeb06ac1ec7f38b upstream.
There is a race between capsnaps flush and removing the inode from 'mdsc->snap_flush_list' list:
== Thread A == == Thread B == ceph_queue_cap_snap() -> allocate 'capsnapA' ->ihold('&ci->vfs_inode') ->add 'capsnapA' to 'ci->i_cap_snaps' ->add 'ci' to 'mdsc->snap_flush_list' ... == Thread C == ceph_flush_snaps() ->__ceph_flush_snaps() ->__send_flush_snap() handle_cap_flushsnap_ack() ->iput('&ci->vfs_inode') this also will release 'ci' ... == Thread D == ceph_handle_snap() ->flush_snaps() ->iterate 'mdsc->snap_flush_list' ->get the stale 'ci' ->remove 'ci' from ->ihold(&ci->vfs_inode) this 'mdsc->snap_flush_list' will WARNING
To fix this we will increase the inode's i_count ref when adding 'ci' to the 'mdsc->snap_flush_list' list.
[ idryomov: need_put int -> bool ]
Cc: stable@vger.kernel.org Link: https://bugzilla.redhat.com/show_bug.cgi?id=2209299 Signed-off-by: Xiubo Li xiubli@redhat.com Reviewed-by: Milind Changire mchangir@redhat.com Reviewed-by: Ilya Dryomov idryomov@gmail.com Signed-off-by: Ilya Dryomov idryomov@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/ceph/caps.c | 6 ++++++ fs/ceph/snap.c | 4 +++- 2 files changed, 9 insertions(+), 1 deletion(-)
--- a/fs/ceph/caps.c +++ b/fs/ceph/caps.c @@ -1636,6 +1636,7 @@ void ceph_flush_snaps(struct ceph_inode_ struct inode *inode = &ci->vfs_inode; struct ceph_mds_client *mdsc = ceph_inode_to_client(inode)->mdsc; struct ceph_mds_session *session = NULL; + bool need_put = false; int mds;
dout("ceph_flush_snaps %p\n", inode); @@ -1687,8 +1688,13 @@ out: } /* we flushed them all; remove this inode from the queue */ spin_lock(&mdsc->snap_flush_lock); + if (!list_empty(&ci->i_snap_flush_item)) + need_put = true; list_del_init(&ci->i_snap_flush_item); spin_unlock(&mdsc->snap_flush_lock); + + if (need_put) + iput(inode); }
/* --- a/fs/ceph/snap.c +++ b/fs/ceph/snap.c @@ -647,8 +647,10 @@ int __ceph_finish_cap_snap(struct ceph_i capsnap->size);
spin_lock(&mdsc->snap_flush_lock); - if (list_empty(&ci->i_snap_flush_item)) + if (list_empty(&ci->i_snap_flush_item)) { + ihold(inode); list_add_tail(&ci->i_snap_flush_item, &mdsc->snap_flush_list); + } spin_unlock(&mdsc->snap_flush_lock); return 1; /* caller may want to ceph_flush_snaps */ }
From: Jan Höppner hoeppner@linux.ibm.com
commit ccc45cb4e7271c74dbb27776ae8f73d84557f5c6 upstream.
The lock around counting the channel queue length in the BIODASDINFO ioctl was incorrectly changed to the dasd_block->queue_lock with commit 583d6535cb9d ("dasd: remove dead code"). This can lead to endless list iterations and a subsequent crash.
The queue_lock is supposed to be used only for queue lists belonging to dasd_block. For dasd_device related queue lists the ccwdev lock must be used.
Fix the mentioned issues by correctly using the ccwdev lock instead of the queue lock.
Fixes: 583d6535cb9d ("dasd: remove dead code") Cc: stable@vger.kernel.org # v5.0+ Signed-off-by: Jan Höppner hoeppner@linux.ibm.com Reviewed-by: Stefan Haberland sth@linux.ibm.com Signed-off-by: Stefan Haberland sth@linux.ibm.com Link: https://lore.kernel.org/r/20230609153750.1258763-2-sth@linux.ibm.com Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/s390/block/dasd_ioctl.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/s390/block/dasd_ioctl.c +++ b/drivers/s390/block/dasd_ioctl.c @@ -505,10 +505,10 @@ static int __dasd_ioctl_information(stru
memcpy(dasd_info->type, base->discipline->name, 4);
- spin_lock_irqsave(&block->queue_lock, flags); + spin_lock_irqsave(get_ccwdev_lock(base->cdev), flags); list_for_each(l, &base->ccw_queue) dasd_info->chanq_len++; - spin_unlock_irqrestore(&block->queue_lock, flags); + spin_unlock_irqrestore(get_ccwdev_lock(base->cdev), flags); return 0; }
From: Luiz Augusto von Dentz luiz.von.dentz@intel.com
commit c5d2b6fa26b5b8386a9cc902cdece3a46bef2bd2 upstream.
Similar to commit 0f7d9b31ce7a ("netfilter: nf_tables: fix use-after-free in nft_set_catchall_destroy()"). We can not access k after kfree_rcu() call.
Cc: stable@vger.kernel.org Signed-off-by: Min Li lm0963hack@gmail.com Signed-off-by: Luiz Augusto von Dentz luiz.von.dentz@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/bluetooth/hci_core.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
--- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -2685,10 +2685,10 @@ int hci_remove_link_key(struct hci_dev *
int hci_remove_ltk(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 bdaddr_type) { - struct smp_ltk *k; + struct smp_ltk *k, *tmp; int removed = 0;
- list_for_each_entry_rcu(k, &hdev->long_term_keys, list) { + list_for_each_entry_safe(k, tmp, &hdev->long_term_keys, list) { if (bacmp(bdaddr, &k->bdaddr) || k->bdaddr_type != bdaddr_type) continue;
@@ -2704,9 +2704,9 @@ int hci_remove_ltk(struct hci_dev *hdev,
void hci_remove_irk(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 addr_type) { - struct smp_irk *k; + struct smp_irk *k, *tmp;
- list_for_each_entry_rcu(k, &hdev->identity_resolving_keys, list) { + list_for_each_entry_safe(k, tmp, &hdev->identity_resolving_keys, list) { if (bacmp(bdaddr, &k->bdaddr) || k->addr_type != addr_type) continue;
From: Johan Hovold johan+linaro@kernel.org
commit 47c5d829a3e326b7395352a10fc8a6effe7afa15 upstream.
Since commit 3e4be65eb82c ("Bluetooth: hci_qca: Add poweroff support during hci down for wcn3990"), the setup callback which registers the debugfs interface can be called multiple times.
This specifically leads to the following error when powering on the controller:
debugfs: Directory 'ibs' with parent 'hci0' already present!
Add a driver flag to avoid trying to register the debugfs interface more than once.
Fixes: 3e4be65eb82c ("Bluetooth: hci_qca: Add poweroff support during hci down for wcn3990") Cc: stable@vger.kernel.org # 4.20 Signed-off-by: Johan Hovold johan+linaro@kernel.org Signed-off-by: Luiz Augusto von Dentz luiz.von.dentz@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/bluetooth/hci_qca.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/bluetooth/hci_qca.c +++ b/drivers/bluetooth/hci_qca.c @@ -78,7 +78,8 @@ enum qca_flags { QCA_HW_ERROR_EVENT, QCA_SSR_TRIGGERED, QCA_BT_OFF, - QCA_ROM_FW + QCA_ROM_FW, + QCA_DEBUGFS_CREATED, };
enum qca_capabilities { @@ -633,6 +634,9 @@ static void qca_debugfs_init(struct hci_ if (!hdev->debugfs) return;
+ if (test_and_set_bit(QCA_DEBUGFS_CREATED, &qca->flags)) + return; + ibs_dir = debugfs_create_dir("ibs", hdev->debugfs);
/* read only */
From: Rijo Thomas Rijo-john.Thomas@amd.com
commit 436eeae0411acdfc54521ddea80ee76d4ae8a7ea upstream.
After TEE has completed processing of TEE_CMD_ID_LOAD_TA, set proper value in 'return_origin' argument passed by open_session() call. To do so, add 'return_origin' field to the structure tee_cmd_load_ta. The Trusted OS shall update return_origin as part of TEE processing.
This change to 'struct tee_cmd_load_ta' interface requires a similar update in AMD-TEE Trusted OS's TEE_CMD_ID_LOAD_TA interface.
This patch has been verified on Phoenix Birman setup. On older APUs, return_origin value will be 0.
Cc: stable@vger.kernel.org Fixes: 757cc3e9ff1d ("tee: add AMD-TEE driver") Tested-by: Sourabh Das sourabh.das@amd.com Signed-off-by: Rijo Thomas Rijo-john.Thomas@amd.com Acked-by: Sumit Garg sumit.garg@linaro.org Signed-off-by: Jens Wiklander jens.wiklander@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/tee/amdtee/amdtee_if.h | 10 ++++++---- drivers/tee/amdtee/call.c | 28 ++++++++++++++++------------ 2 files changed, 22 insertions(+), 16 deletions(-)
diff --git a/drivers/tee/amdtee/amdtee_if.h b/drivers/tee/amdtee/amdtee_if.h index ff48c3e47375..e2014e21530a 100644 --- a/drivers/tee/amdtee/amdtee_if.h +++ b/drivers/tee/amdtee/amdtee_if.h @@ -118,16 +118,18 @@ struct tee_cmd_unmap_shared_mem {
/** * struct tee_cmd_load_ta - load Trusted Application (TA) binary into TEE - * @low_addr: [in] bits [31:0] of the physical address of the TA binary - * @hi_addr: [in] bits [63:32] of the physical address of the TA binary - * @size: [in] size of TA binary in bytes - * @ta_handle: [out] return handle of the loaded TA + * @low_addr: [in] bits [31:0] of the physical address of the TA binary + * @hi_addr: [in] bits [63:32] of the physical address of the TA binary + * @size: [in] size of TA binary in bytes + * @ta_handle: [out] return handle of the loaded TA + * @return_origin: [out] origin of return code after TEE processing */ struct tee_cmd_load_ta { u32 low_addr; u32 hi_addr; u32 size; u32 ta_handle; + u32 return_origin; };
/** diff --git a/drivers/tee/amdtee/call.c b/drivers/tee/amdtee/call.c index e8cd9aaa3467..e9b63dcb3194 100644 --- a/drivers/tee/amdtee/call.c +++ b/drivers/tee/amdtee/call.c @@ -423,19 +423,23 @@ int handle_load_ta(void *data, u32 size, struct tee_ioctl_open_session_arg *arg) if (ret) { arg->ret_origin = TEEC_ORIGIN_COMMS; arg->ret = TEEC_ERROR_COMMUNICATION; - } else if (arg->ret == TEEC_SUCCESS) { - ret = get_ta_refcount(load_cmd.ta_handle); - if (!ret) { - arg->ret_origin = TEEC_ORIGIN_COMMS; - arg->ret = TEEC_ERROR_OUT_OF_MEMORY; + } else { + arg->ret_origin = load_cmd.return_origin;
- /* Unload the TA on error */ - unload_cmd.ta_handle = load_cmd.ta_handle; - psp_tee_process_cmd(TEE_CMD_ID_UNLOAD_TA, - (void *)&unload_cmd, - sizeof(unload_cmd), &ret); - } else { - set_session_id(load_cmd.ta_handle, 0, &arg->session); + if (arg->ret == TEEC_SUCCESS) { + ret = get_ta_refcount(load_cmd.ta_handle); + if (!ret) { + arg->ret_origin = TEEC_ORIGIN_COMMS; + arg->ret = TEEC_ERROR_OUT_OF_MEMORY; + + /* Unload the TA on error */ + unload_cmd.ta_handle = load_cmd.ta_handle; + psp_tee_process_cmd(TEE_CMD_ID_UNLOAD_TA, + (void *)&unload_cmd, + sizeof(unload_cmd), &ret); + } else { + set_session_id(load_cmd.ta_handle, 0, &arg->session); + } } } mutex_unlock(&ta_refcount_mutex);
From: Ilya Dryomov idryomov@gmail.com
commit 09fe05c57b5aaf23e2c35036c98ea9f282b19a77 upstream.
Move RBD_OBJ_FLAG_COPYUP_ENABLED flag setting into the object request state machine to allow for the snapshot context to be captured in the image request state machine rather than in rbd_queue_workfn().
Cc: stable@vger.kernel.org Signed-off-by: Ilya Dryomov idryomov@gmail.com Reviewed-by: Dongsheng Yang dongsheng.yang@easystack.cn Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/block/rbd.c | 32 +++++++++++++++++++++----------- 1 file changed, 21 insertions(+), 11 deletions(-)
--- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -1397,14 +1397,28 @@ static bool rbd_obj_is_tail(struct rbd_o /* * Must be called after rbd_obj_calc_img_extents(). */ -static bool rbd_obj_copyup_enabled(struct rbd_obj_request *obj_req) +static void rbd_obj_set_copyup_enabled(struct rbd_obj_request *obj_req) { - if (!obj_req->num_img_extents || - (rbd_obj_is_entire(obj_req) && - !obj_req->img_request->snapc->num_snaps)) - return false; + if (obj_req->img_request->op_type == OBJ_OP_DISCARD) { + dout("%s %p objno %llu discard\n", __func__, obj_req, + obj_req->ex.oe_objno); + return; + }
- return true; + if (!obj_req->num_img_extents) { + dout("%s %p objno %llu not overlapping\n", __func__, obj_req, + obj_req->ex.oe_objno); + return; + } + + if (rbd_obj_is_entire(obj_req) && + !obj_req->img_request->snapc->num_snaps) { + dout("%s %p objno %llu entire\n", __func__, obj_req, + obj_req->ex.oe_objno); + return; + } + + obj_req->flags |= RBD_OBJ_FLAG_COPYUP_ENABLED; }
static u64 rbd_obj_img_extents_bytes(struct rbd_obj_request *obj_req) @@ -2296,9 +2310,6 @@ static int rbd_obj_init_write(struct rbd if (ret) return ret;
- if (rbd_obj_copyup_enabled(obj_req)) - obj_req->flags |= RBD_OBJ_FLAG_COPYUP_ENABLED; - obj_req->write_state = RBD_OBJ_WRITE_START; return 0; } @@ -2404,8 +2415,6 @@ static int rbd_obj_init_zeroout(struct r if (ret) return ret;
- if (rbd_obj_copyup_enabled(obj_req)) - obj_req->flags |= RBD_OBJ_FLAG_COPYUP_ENABLED; if (!obj_req->num_img_extents) { obj_req->flags |= RBD_OBJ_FLAG_NOOP_FOR_NONEXISTENT; if (rbd_obj_is_entire(obj_req)) @@ -3351,6 +3360,7 @@ again: case RBD_OBJ_WRITE_START: rbd_assert(!*result);
+ rbd_obj_set_copyup_enabled(obj_req); if (rbd_obj_write_is_noop(obj_req)) return true;
From: Ilya Dryomov idryomov@gmail.com
commit 870611e4877eff1e8413c3fb92a585e45d5291f6 upstream.
Move capturing the snapshot context into the image request state machine, after exclusive lock is ensured to be held for the duration of dealing with the image request. This is needed to ensure correctness of fast-diff states (OBJECT_EXISTS vs OBJECT_EXISTS_CLEAN) and object deltas computed based off of them. Otherwise the object map that is forked for the snapshot isn't guaranteed to accurately reflect the contents of the snapshot when the snapshot is taken under I/O. This breaks differential backup and snapshot-based mirroring use cases with fast-diff enabled: since some object deltas may be incomplete, the destination image may get corrupted.
Cc: stable@vger.kernel.org Link: https://tracker.ceph.com/issues/61472 Signed-off-by: Ilya Dryomov idryomov@gmail.com Reviewed-by: Dongsheng Yang dongsheng.yang@easystack.cn Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/block/rbd.c | 30 +++++++++++++++++++++++------- 1 file changed, 23 insertions(+), 7 deletions(-)
--- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -1399,6 +1399,8 @@ static bool rbd_obj_is_tail(struct rbd_o */ static void rbd_obj_set_copyup_enabled(struct rbd_obj_request *obj_req) { + rbd_assert(obj_req->img_request->snapc); + if (obj_req->img_request->op_type == OBJ_OP_DISCARD) { dout("%s %p objno %llu discard\n", __func__, obj_req, obj_req->ex.oe_objno); @@ -1519,6 +1521,7 @@ __rbd_obj_add_osd_request(struct rbd_obj static struct ceph_osd_request * rbd_obj_add_osd_request(struct rbd_obj_request *obj_req, int num_ops) { + rbd_assert(obj_req->img_request->snapc); return __rbd_obj_add_osd_request(obj_req, obj_req->img_request->snapc, num_ops); } @@ -1655,15 +1658,18 @@ static void rbd_img_request_init(struct mutex_init(&img_request->state_mutex); }
+/* + * Only snap_id is captured here, for reads. For writes, snapshot + * context is captured in rbd_img_object_requests() after exclusive + * lock is ensured to be held. + */ static void rbd_img_capture_header(struct rbd_img_request *img_req) { struct rbd_device *rbd_dev = img_req->rbd_dev;
lockdep_assert_held(&rbd_dev->header_rwsem);
- if (rbd_img_is_write(img_req)) - img_req->snapc = ceph_get_snap_context(rbd_dev->header.snapc); - else + if (!rbd_img_is_write(img_req)) img_req->snap_id = rbd_dev->spec->snap_id;
if (rbd_dev_parent_get(rbd_dev)) @@ -3547,9 +3553,19 @@ static int rbd_img_exclusive_lock(struct
static void rbd_img_object_requests(struct rbd_img_request *img_req) { + struct rbd_device *rbd_dev = img_req->rbd_dev; struct rbd_obj_request *obj_req;
rbd_assert(!img_req->pending.result && !img_req->pending.num_pending); + rbd_assert(!need_exclusive_lock(img_req) || + __rbd_is_lock_owner(rbd_dev)); + + if (rbd_img_is_write(img_req)) { + rbd_assert(!img_req->snapc); + down_read(&rbd_dev->header_rwsem); + img_req->snapc = ceph_get_snap_context(rbd_dev->header.snapc); + up_read(&rbd_dev->header_rwsem); + }
for_each_obj_request(img_req, obj_req) { int result = 0; @@ -3567,7 +3583,6 @@ static void rbd_img_object_requests(stru
static bool rbd_img_advance(struct rbd_img_request *img_req, int *result) { - struct rbd_device *rbd_dev = img_req->rbd_dev; int ret;
again: @@ -3588,9 +3603,6 @@ again: if (*result) return true;
- rbd_assert(!need_exclusive_lock(img_req) || - __rbd_is_lock_owner(rbd_dev)); - rbd_img_object_requests(img_req); if (!img_req->pending.num_pending) { *result = img_req->pending.result; @@ -4048,6 +4060,10 @@ static int rbd_post_acquire_action(struc { int ret;
+ ret = rbd_dev_refresh(rbd_dev); + if (ret) + return ret; + if (rbd_dev->header.features & RBD_FEATURE_OBJECT_MAP) { ret = rbd_object_map_open(rbd_dev); if (ret)
From: Martin Hundebøll martin@geanix.com
commit 5b10ff013e8a57f8845615ac2cc37edf7f6eef05 upstream.
Without this, the gpio cannot be explicitly mux'ed to its gpio function.
Fixes: 83c566806a68a ("pinctrl: meson-axg: Add new pinctrl driver for Meson AXG SoC") Cc: stable@vger.kernel.org Signed-off-by: Martin Hundebøll martin@geanix.com Reviewed-by: Neil Armstrong neil.armstrong@linaro.org Reviewed-by: Dmitry Rokosov ddrokosov@sberdevices.ru Link: https://lore.kernel.org/r/20230512064925.133516-1-martin@geanix.com Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/pinctrl/meson/pinctrl-meson-axg.c | 1 + 1 file changed, 1 insertion(+)
--- a/drivers/pinctrl/meson/pinctrl-meson-axg.c +++ b/drivers/pinctrl/meson/pinctrl-meson-axg.c @@ -400,6 +400,7 @@ static struct meson_pmx_group meson_axg_ GPIO_GROUP(GPIOA_15), GPIO_GROUP(GPIOA_16), GPIO_GROUP(GPIOA_17), + GPIO_GROUP(GPIOA_18), GPIO_GROUP(GPIOA_19), GPIO_GROUP(GPIOA_20),
From: Ruihan Li lrh2000@pku.edu.cn
commit 0143d148d1e882fb1538dc9974c94d63961719b9 upstream.
The current implementation of usbdev_mmap uses usb_alloc_coherent to allocate memory pages that will later be mapped into the user space. Meanwhile, usb_alloc_coherent employs three different methods to allocate memory, as outlined below: * If hcd->localmem_pool is non-null, it uses gen_pool_dma_alloc to allocate memory; * If DMA is not available, it uses kmalloc to allocate memory; * Otherwise, it uses dma_alloc_coherent.
However, it should be noted that gen_pool_dma_alloc does not guarantee that the resulting memory will be page-aligned. Furthermore, trying to map slab pages (i.e., memory allocated by kmalloc) into the user space is not resonable and can lead to problems, such as a type confusion bug when PAGE_TABLE_CHECK=y [1].
To address these issues, this patch introduces hcd_alloc_coherent_pages, which addresses the above two problems. Specifically, hcd_alloc_coherent_pages uses gen_pool_dma_alloc_align instead of gen_pool_dma_alloc to ensure that the memory is page-aligned. To replace kmalloc, hcd_alloc_coherent_pages directly allocates pages by calling __get_free_pages.
Reported-by: syzbot+fcf1a817ceb50935ce99@syzkaller.appspotmail.comm Closes: https://lore.kernel.org/lkml/000000000000258e5e05fae79fc1@google.com/ [1] Fixes: f7d34b445abc ("USB: Add support for usbfs zerocopy.") Fixes: ff2437befd8f ("usb: host: Fix excessive alignment restriction for local memory allocations") Cc: stable@vger.kernel.org Signed-off-by: Ruihan Li lrh2000@pku.edu.cn Acked-by: Alan Stern stern@rowland.harvard.edu Link: https://lore.kernel.org/r/20230515130958.32471-2-lrh2000@pku.edu.cn Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/core/buffer.c | 41 +++++++++++++++++++++++++++++++++++++++++ drivers/usb/core/devio.c | 9 +++++---- include/linux/usb/hcd.h | 5 +++++ 3 files changed, 51 insertions(+), 4 deletions(-)
--- a/drivers/usb/core/buffer.c +++ b/drivers/usb/core/buffer.c @@ -170,3 +170,44 @@ void hcd_buffer_free( } dma_free_coherent(hcd->self.sysdev, size, addr, dma); } + +void *hcd_buffer_alloc_pages(struct usb_hcd *hcd, + size_t size, gfp_t mem_flags, dma_addr_t *dma) +{ + if (size == 0) + return NULL; + + if (hcd->localmem_pool) + return gen_pool_dma_alloc_align(hcd->localmem_pool, + size, dma, PAGE_SIZE); + + /* some USB hosts just use PIO */ + if (!hcd_uses_dma(hcd)) { + *dma = DMA_MAPPING_ERROR; + return (void *)__get_free_pages(mem_flags, + get_order(size)); + } + + return dma_alloc_coherent(hcd->self.sysdev, + size, dma, mem_flags); +} + +void hcd_buffer_free_pages(struct usb_hcd *hcd, + size_t size, void *addr, dma_addr_t dma) +{ + if (!addr) + return; + + if (hcd->localmem_pool) { + gen_pool_free(hcd->localmem_pool, + (unsigned long)addr, size); + return; + } + + if (!hcd_uses_dma(hcd)) { + free_pages((unsigned long)addr, get_order(size)); + return; + } + + dma_free_coherent(hcd->self.sysdev, size, addr, dma); +} --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -173,6 +173,7 @@ static int connected(struct usb_dev_stat static void dec_usb_memory_use_count(struct usb_memory *usbm, int *count) { struct usb_dev_state *ps = usbm->ps; + struct usb_hcd *hcd = bus_to_hcd(ps->dev->bus); unsigned long flags;
spin_lock_irqsave(&ps->lock, flags); @@ -181,8 +182,8 @@ static void dec_usb_memory_use_count(str list_del(&usbm->memlist); spin_unlock_irqrestore(&ps->lock, flags);
- usb_free_coherent(ps->dev, usbm->size, usbm->mem, - usbm->dma_handle); + hcd_buffer_free_pages(hcd, usbm->size, + usbm->mem, usbm->dma_handle); usbfs_decrease_memory_usage( usbm->size + sizeof(struct usb_memory)); kfree(usbm); @@ -234,8 +235,8 @@ static int usbdev_mmap(struct file *file goto error_decrease_mem; }
- mem = usb_alloc_coherent(ps->dev, size, GFP_USER | __GFP_NOWARN, - &dma_handle); + mem = hcd_buffer_alloc_pages(hcd, + size, GFP_USER | __GFP_NOWARN, &dma_handle); if (!mem) { ret = -ENOMEM; goto error_free_usbm; --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -504,6 +504,11 @@ void *hcd_buffer_alloc(struct usb_bus *b void hcd_buffer_free(struct usb_bus *bus, size_t size, void *addr, dma_addr_t dma);
+void *hcd_buffer_alloc_pages(struct usb_hcd *hcd, + size_t size, gfp_t mem_flags, dma_addr_t *dma); +void hcd_buffer_free_pages(struct usb_hcd *hcd, + size_t size, void *addr, dma_addr_t dma); + /* generic bus glue, needed for host controllers that don't use PCI */ extern irqreturn_t usb_hcd_irq(int irq, void *__hcd);
From: Ruihan Li lrh2000@pku.edu.cn
commit d0b861653f8c16839c3035875b556afc4472f941 upstream.
When hcd->localmem_pool is non-null, localmem_pool is used to allocate DMA memory. In this case, the dma address will be properly returned (in dma_handle), and dma_mmap_coherent should be used to map this memory into the user space. However, the current implementation uses pfn_remap_range, which is supposed to map normal pages.
Instead of repeating the logic in the memory allocation function, this patch introduces a more robust solution. Here, the type of allocated memory is checked by testing whether dma_handle is properly set. If dma_handle is properly returned, it means some DMA pages are allocated and dma_mmap_coherent should be used to map them. Otherwise, normal pages are allocated and pfn_remap_range should be called. This ensures that the correct mmap functions are used consistently, independently with logic details that determine which type of memory gets allocated.
Fixes: a0e710a7def4 ("USB: usbfs: fix mmap dma mismatch") Cc: stable@vger.kernel.org Signed-off-by: Ruihan Li lrh2000@pku.edu.cn Link: https://lore.kernel.org/r/20230515130958.32471-3-lrh2000@pku.edu.cn Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/core/devio.c | 11 +++++++++-- 1 file changed, 9 insertions(+), 2 deletions(-)
--- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -222,7 +222,7 @@ static int usbdev_mmap(struct file *file size_t size = vma->vm_end - vma->vm_start; void *mem; unsigned long flags; - dma_addr_t dma_handle; + dma_addr_t dma_handle = DMA_MAPPING_ERROR; int ret;
ret = usbfs_increase_memory_usage(size + sizeof(struct usb_memory)); @@ -252,7 +252,14 @@ static int usbdev_mmap(struct file *file usbm->vma_use_count = 1; INIT_LIST_HEAD(&usbm->memlist);
- if (hcd->localmem_pool || !hcd_uses_dma(hcd)) { + /* + * In DMA-unavailable cases, hcd_buffer_alloc_pages allocates + * normal pages and assigns DMA_MAPPING_ERROR to dma_handle. Check + * whether we are in such cases, and then use remap_pfn_range (or + * dma_mmap_coherent) to map normal (or DMA) pages into the user + * space, respectively. + */ + if (dma_handle == DMA_MAPPING_ERROR) { if (remap_pfn_range(vma, vma->vm_start, virt_to_phys(usbm->mem) >> PAGE_SHIFT, size, vma->vm_page_prot) < 0) {
Not upstream as newer kernels fixed this properly.
Fix up a mismatched function prototype warning in the vc04_services driver that gcc-13 shows.
Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c +++ b/drivers/staging/vc04_services/interface/vchiq_arm/vchiq_arm.c @@ -2315,7 +2315,7 @@ vchiq_arm_init_state(struct vchiq_state return VCHIQ_SUCCESS; }
-enum vchiq_status +int vchiq_use_internal(struct vchiq_state *state, struct vchiq_service *service, enum USE_TYPE_E use_type) { @@ -2375,7 +2375,7 @@ out: return ret; }
-enum vchiq_status +int vchiq_release_internal(struct vchiq_state *state, struct vchiq_service *service) { struct vchiq_arm_state *arm_state = vchiq_platform_get_arm_state(state);
From: Srinivas Kandagatla srinivas.kandagatla@linaro.org
[ Upstream commit 6e7a6d4797ef521c0762914610ed682e102b9d36 ]
regmap-sdw does not support multi register writes, so there is no point in setting this flag. This also leads to incorrect programming of WSA codecs with regmap_multi_reg_write() call.
This invalid configuration should have been rejected by regmap-sdw.
Fixes: a0aab9e1404a ("ASoC: codecs: add wsa881x amplifier support") Signed-off-by: Srinivas Kandagatla srinivas.kandagatla@linaro.org Link: https://lore.kernel.org/r/20230523154605.4284-2-srinivas.kandagatla@linaro.o... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/wsa881x.c | 1 - 1 file changed, 1 deletion(-)
diff --git a/sound/soc/codecs/wsa881x.c b/sound/soc/codecs/wsa881x.c index 15b3f47fbfa35..9f66f6dc2c67f 100644 --- a/sound/soc/codecs/wsa881x.c +++ b/sound/soc/codecs/wsa881x.c @@ -646,7 +646,6 @@ static struct regmap_config wsa881x_regmap_config = { .readable_reg = wsa881x_readable_register, .reg_format_endian = REGMAP_ENDIAN_NATIVE, .val_format_endian = REGMAP_ENDIAN_NATIVE, - .can_multi_write = true, };
enum {
From: Uwe Kleine-König u.kleine-koenig@pengutronix.de
[ Upstream commit ca0aa17f2db3468fd017038d23a78e17388e2f67 ]
If pm runtime resume fails the .remove callback used to exit early. This resulted in an error message by the driver core but the device gets removed anyhow. This lets the registered i2c adapter stay around with an unbound parent device.
So only skip clk disabling if resume failed, but do delete the adapter.
Fixes: 8b9ec0719834 ("i2c: Add Spreadtrum I2C controller driver") Signed-off-by: Uwe Kleine-König u.kleine-koenig@pengutronix.de Reviewed-by: Andi Shyti andi.shyti@kernel.org Signed-off-by: Wolfram Sang wsa@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/i2c/busses/i2c-sprd.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/i2c/busses/i2c-sprd.c b/drivers/i2c/busses/i2c-sprd.c index 8ead7e021008c..a520aa06d2cb5 100644 --- a/drivers/i2c/busses/i2c-sprd.c +++ b/drivers/i2c/busses/i2c-sprd.c @@ -576,12 +576,14 @@ static int sprd_i2c_remove(struct platform_device *pdev) struct sprd_i2c *i2c_dev = platform_get_drvdata(pdev); int ret;
- ret = pm_runtime_resume_and_get(i2c_dev->dev); + ret = pm_runtime_get_sync(i2c_dev->dev); if (ret < 0) - return ret; + dev_err(&pdev->dev, "Failed to resume device (%pe)\n", ERR_PTR(ret));
i2c_del_adapter(&i2c_dev->adap); - clk_disable_unprepare(i2c_dev->clk); + + if (ret >= 0) + clk_disable_unprepare(i2c_dev->clk);
pm_runtime_put_noidle(i2c_dev->dev); pm_runtime_disable(i2c_dev->dev);
From: Randy Dunlap rdunlap@infradead.org
[ Upstream commit 7f3c782b3914e510b646a77aedc3adeac2e4a63b ]
Selecting only REGMAP_I2C can leave REGMAP unset, causing build errors, so also select REGMAP to prevent the build errors.
../drivers/misc/eeprom/at24.c:540:42: warning: 'struct regmap_config' declared inside parameter list will not be visible outside of this definition or declaration 540 | struct regmap_config *regmap_config) ../drivers/misc/eeprom/at24.c: In function 'at24_make_dummy_client': ../drivers/misc/eeprom/at24.c:552:18: error: implicit declaration of function 'devm_regmap_init_i2c' [-Werror=implicit-function-declaration] 552 | regmap = devm_regmap_init_i2c(dummy_client, regmap_config); ../drivers/misc/eeprom/at24.c:552:16: warning: assignment to 'struct regmap *' from 'int' makes pointer from integer without a cast [-Wint-conversion] 552 | regmap = devm_regmap_init_i2c(dummy_client, regmap_config); ../drivers/misc/eeprom/at24.c: In function 'at24_probe': ../drivers/misc/eeprom/at24.c:586:16: error: variable 'regmap_config' has initializer but incomplete type 586 | struct regmap_config regmap_config = { }; ../drivers/misc/eeprom/at24.c:586:30: error: storage size of 'regmap_config' isn't known 586 | struct regmap_config regmap_config = { }; ../drivers/misc/eeprom/at24.c:586:30: warning: unused variable 'regmap_config' [-Wunused-variable]
Fixes: 5c015258478e ("eeprom: at24: add basic regmap_i2c support") Signed-off-by: Randy Dunlap rdunlap@infradead.org Signed-off-by: Bartosz Golaszewski bartosz.golaszewski@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/misc/eeprom/Kconfig | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig index 0f791bfdc1f58..c92f2cdf40263 100644 --- a/drivers/misc/eeprom/Kconfig +++ b/drivers/misc/eeprom/Kconfig @@ -6,6 +6,7 @@ config EEPROM_AT24 depends on I2C && SYSFS select NVMEM select NVMEM_SYSFS + select REGMAP select REGMAP_I2C help Enable this driver to get read/write support to most I2C EEPROMs
From: Ruan Jinjie ruanjinjie@huawei.com
[ Upstream commit 99a670b2069c725a7b50318aa681d9cae8f89325 ]
On riscv qemu platform, when add kprobe event on do_sys_open() to show filename string arg, it just print fault as follow:
echo 'p:myprobe do_sys_open dfd=$arg1 filename=+0($arg2):string flags=$arg3 mode=$arg4' > kprobe_events
bash-166 [000] ...1. 360.195367: myprobe: (do_sys_open+0x0/0x84) dfd=0xffffffffffffff9c filename=(fault) flags=0x8241 mode=0x1b6
bash-166 [000] ...1. 360.219369: myprobe: (do_sys_open+0x0/0x84) dfd=0xffffffffffffff9c filename=(fault) flags=0x8241 mode=0x1b6
bash-191 [000] ...1. 360.378827: myprobe: (do_sys_open+0x0/0x84) dfd=0xffffffffffffff9c filename=(fault) flags=0x98800 mode=0x0
As riscv do not select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE, the +0($arg2) addr is processed as a kernel address though it is a userspace address, cause the above filename=(fault) print. So select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE to avoid the issue, after that the kprobe trace is ok as below:
bash-166 [000] ...1. 96.767641: myprobe: (do_sys_open+0x0/0x84) dfd=0xffffffffffffff9c filename="/dev/null" flags=0x8241 mode=0x1b6
bash-166 [000] ...1. 96.793751: myprobe: (do_sys_open+0x0/0x84) dfd=0xffffffffffffff9c filename="/dev/null" flags=0x8241 mode=0x1b6
bash-177 [000] ...1. 96.962354: myprobe: (do_sys_open+0x0/0x84) dfd=0xffffffffffffff9c filename="/sys/kernel/debug/tracing/events/kprobes/" flags=0x98800 mode=0x0
Signed-off-by: Ruan Jinjie ruanjinjie@huawei.com Acked-by: Björn Töpel bjorn@rivosinc.com Fixes: 0ebeea8ca8a4 ("bpf: Restrict bpf_probe_read{, str}() only to archs where they work") Link: https://lore.kernel.org/r/20230504072910.3742842-1-ruanjinjie@huawei.com Signed-off-by: Palmer Dabbelt palmer@rivosinc.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/riscv/Kconfig | 1 + 1 file changed, 1 insertion(+)
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig index c192bd7305dc6..b28fabfc91bf7 100644 --- a/arch/riscv/Kconfig +++ b/arch/riscv/Kconfig @@ -22,6 +22,7 @@ config RISCV select ARCH_HAS_GIGANTIC_PAGE select ARCH_HAS_KCOV select ARCH_HAS_MMIOWB + select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE select ARCH_HAS_PTE_SPECIAL select ARCH_HAS_SET_DIRECT_MAP select ARCH_HAS_SET_MEMORY
From: Shannon Nelson shannon.nelson@amd.com
[ Upstream commit 55d8122f5cd62d5aaa225d7167dcd14a44c850b9 ]
Use the right structs for PACKED or split vqs when setting and getting the vring base.
Fixes: 4c8cf31885f6 ("vhost: introduce vDPA-based backend") Signed-off-by: Shannon Nelson shannon.nelson@amd.com Message-Id: 20230424225031.18947-3-shannon.nelson@amd.com Signed-off-by: Michael S. Tsirkin mst@redhat.com Acked-by: Jason Wang jasowang@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/vhost/vhost.c | 18 +++++++++++++----- drivers/vhost/vhost.h | 8 ++++++-- 2 files changed, 19 insertions(+), 7 deletions(-)
diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c index 1f9a1554ce5f4..de110363af521 100644 --- a/drivers/vhost/vhost.c +++ b/drivers/vhost/vhost.c @@ -1621,17 +1621,25 @@ long vhost_vring_ioctl(struct vhost_dev *d, unsigned int ioctl, void __user *arg r = -EFAULT; break; } - if (s.num > 0xffff) { - r = -EINVAL; - break; + if (vhost_has_feature(vq, VIRTIO_F_RING_PACKED)) { + vq->last_avail_idx = s.num & 0xffff; + vq->last_used_idx = (s.num >> 16) & 0xffff; + } else { + if (s.num > 0xffff) { + r = -EINVAL; + break; + } + vq->last_avail_idx = s.num; } - vq->last_avail_idx = s.num; /* Forget the cached index value. */ vq->avail_idx = vq->last_avail_idx; break; case VHOST_GET_VRING_BASE: s.index = idx; - s.num = vq->last_avail_idx; + if (vhost_has_feature(vq, VIRTIO_F_RING_PACKED)) + s.num = (u32)vq->last_avail_idx | ((u32)vq->last_used_idx << 16); + else + s.num = vq->last_avail_idx; if (copy_to_user(argp, &s, sizeof s)) r = -EFAULT; break; diff --git a/drivers/vhost/vhost.h b/drivers/vhost/vhost.h index 8f80d6b0d843e..e00347f2b4d30 100644 --- a/drivers/vhost/vhost.h +++ b/drivers/vhost/vhost.h @@ -87,13 +87,17 @@ struct vhost_virtqueue { /* The routine to call when the Guest pings us, or timeout. */ vhost_work_fn_t handle_kick;
- /* Last available index we saw. */ + /* Last available index we saw. + * Values are limited to 0x7fff, and the high bit is used as + * a wrap counter when using VIRTIO_F_RING_PACKED. */ u16 last_avail_idx;
/* Caches available index value from user. */ u16 avail_idx;
- /* Last index we used. */ + /* Last index we used. + * Values are limited to 0x7fff, and the high bit is used as + * a wrap counter when using VIRTIO_F_RING_PACKED. */ u16 last_used_idx;
/* Used flags */
From: Theodore Ts'o tytso@mit.edu
commit 1b29243933098cdbc31b579b5616e183b4275e2f upstream.
This reverts commit a44be64bbecb15a452496f60db6eacfee2b59c79.
Link: https://lore.kernel.org/r/653b3359-2005-21b1-039d-c55ca4cffdcc@gmail.com Signed-off-by: Theodore Ts'o tytso@mit.edu Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/ext4/super.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-)
--- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -5799,7 +5799,6 @@ static int ext4_remount(struct super_blo ext4_group_t g; unsigned int journal_ioprio = DEFAULT_JOURNAL_IOPRIO; int err = 0; - int enable_rw = 0; #ifdef CONFIG_QUOTA int enable_quota = 0; int i, j; @@ -5992,7 +5991,7 @@ static int ext4_remount(struct super_blo if (err) goto restore_opts;
- enable_rw = 1; + sb->s_flags &= ~SB_RDONLY; if (ext4_has_feature_mmp(sb)) { err = ext4_multi_mount_protect(sb, le64_to_cpu(es->s_mmp_block)); @@ -6039,9 +6038,6 @@ static int ext4_remount(struct super_blo if (!test_opt(sb, BLOCK_VALIDITY) && sbi->s_system_blks) ext4_release_system_zone(sb);
- if (enable_rw) - sb->s_flags &= ~SB_RDONLY; - /* * Reinitialize lazy itable initialization thread based on * current settings
From: Theodore Ts'o tytso@mit.edu
commit dea9d8f7643fab07bf89a1155f1f94f37d096a5e upstream.
ext4_xattr_block_set() relies on its caller to call dquot_initialize() on the inode. To assure that this has happened there are WARN_ON checks. Unfortunately, this is subject to false positives if there is an antagonist thread which is flipping the file system at high rates between r/o and rw. So only do the check if EXT4_XATTR_DEBUG is enabled.
Link: https://lore.kernel.org/r/20230608044056.GA1418535@mit.edu Signed-off-by: Theodore Ts'o tytso@mit.edu Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/ext4/xattr.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
--- a/fs/ext4/xattr.c +++ b/fs/ext4/xattr.c @@ -1999,8 +1999,9 @@ inserted: else { u32 ref;
+#ifdef EXT4_XATTR_DEBUG WARN_ON_ONCE(dquot_initialize_needed(inode)); - +#endif /* The old block is released after updating the inode. */ error = dquot_alloc_block(inode, @@ -2062,8 +2063,9 @@ inserted: /* We need to allocate a new block */ ext4_fsblk_t goal, block;
+#ifdef EXT4_XATTR_DEBUG WARN_ON_ONCE(dquot_initialize_needed(inode)); - +#endif goal = ext4_group_first_block_no(sb, EXT4_I(inode)->i_block_group); block = ext4_new_meta_blocks(handle, inode, goal, 0,
From: Eric Dumazet edumazet@google.com
commit d24f511b04b8b159b705ec32a3b8782667d1b06a upstream.
tcp_min_tso_segs is now stored in u8, so max value is 255.
255 limit is enforced by proc_dou8vec_minmax().
We can therefore remove the gso_max_segs variable.
Fixes: 47996b489bdc ("tcp: convert elligible sysctls to u8") Signed-off-by: Eric Dumazet edumazet@google.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/ipv4/sysctl_net_ipv4.c | 2 -- 1 file changed, 2 deletions(-)
--- a/net/ipv4/sysctl_net_ipv4.c +++ b/net/ipv4/sysctl_net_ipv4.c @@ -31,7 +31,6 @@ static int two = 2; static int four = 4; static int thousand = 1000; -static int gso_max_segs = GSO_MAX_SEGS; static int tcp_retr1_max = 255; static int ip_local_port_range_min[] = { 1, 1 }; static int ip_local_port_range_max[] = { 65535, 65535 }; @@ -1193,7 +1192,6 @@ static struct ctl_table ipv4_net_table[] .mode = 0644, .proc_handler = proc_dou8vec_minmax, .extra1 = SYSCTL_ONE, - .extra2 = &gso_max_segs, }, { .procname = "tcp_min_rtt_wlen",
From: Darrick J. Wong djwong@kernel.org
commit 22ed903eee23a5b174e240f1cdfa9acf393a5210 upstream.
syzbot detected a crash during log recovery:
XFS (loop0): Mounting V5 Filesystem bfdc47fc-10d8-4eed-a562-11a831b3f791 XFS (loop0): Torn write (CRC failure) detected at log block 0x180. Truncating head block from 0x200. XFS (loop0): Starting recovery (logdev: internal) ================================================================== BUG: KASAN: slab-out-of-bounds in xfs_btree_lookup_get_block+0x15c/0x6d0 fs/xfs/libxfs/xfs_btree.c:1813 Read of size 8 at addr ffff88807e89f258 by task syz-executor132/5074
CPU: 0 PID: 5074 Comm: syz-executor132 Not tainted 6.2.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x1b1/0x290 lib/dump_stack.c:106 print_address_description+0x74/0x340 mm/kasan/report.c:306 print_report+0x107/0x1f0 mm/kasan/report.c:417 kasan_report+0xcd/0x100 mm/kasan/report.c:517 xfs_btree_lookup_get_block+0x15c/0x6d0 fs/xfs/libxfs/xfs_btree.c:1813 xfs_btree_lookup+0x346/0x12c0 fs/xfs/libxfs/xfs_btree.c:1913 xfs_btree_simple_query_range+0xde/0x6a0 fs/xfs/libxfs/xfs_btree.c:4713 xfs_btree_query_range+0x2db/0x380 fs/xfs/libxfs/xfs_btree.c:4953 xfs_refcount_recover_cow_leftovers+0x2d1/0xa60 fs/xfs/libxfs/xfs_refcount.c:1946 xfs_reflink_recover_cow+0xab/0x1b0 fs/xfs/xfs_reflink.c:930 xlog_recover_finish+0x824/0x920 fs/xfs/xfs_log_recover.c:3493 xfs_log_mount_finish+0x1ec/0x3d0 fs/xfs/xfs_log.c:829 xfs_mountfs+0x146a/0x1ef0 fs/xfs/xfs_mount.c:933 xfs_fs_fill_super+0xf95/0x11f0 fs/xfs/xfs_super.c:1666 get_tree_bdev+0x400/0x620 fs/super.c:1282 vfs_get_tree+0x88/0x270 fs/super.c:1489 do_new_mount+0x289/0xad0 fs/namespace.c:3145 do_mount fs/namespace.c:3488 [inline] __do_sys_mount fs/namespace.c:3697 [inline] __se_sys_mount+0x2d3/0x3c0 fs/namespace.c:3674 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f89fa3f4aca Code: 83 c4 08 5b 5d c3 66 2e 0f 1f 84 00 00 00 00 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 49 89 ca b8 a5 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fffd5fb5ef8 EFLAGS: 00000206 ORIG_RAX: 00000000000000a5 RAX: ffffffffffffffda RBX: 00646975756f6e2c RCX: 00007f89fa3f4aca RDX: 0000000020000100 RSI: 0000000020009640 RDI: 00007fffd5fb5f10 RBP: 00007fffd5fb5f10 R08: 00007fffd5fb5f50 R09: 000000000000970d R10: 0000000000200800 R11: 0000000000000206 R12: 0000000000000004 R13: 0000555556c6b2c0 R14: 0000000000200800 R15: 00007fffd5fb5f50 </TASK>
The fuzzed image contains an AGF with an obviously garbage agf_refcount_level value of 32, and a dirty log with a buffer log item for that AGF. The ondisk AGF has a higher LSN than the recovered log item. xlog_recover_buf_commit_pass2 reads the buffer, compares the LSNs, and decides to skip replay because the ondisk buffer appears to be newer.
Unfortunately, the ondisk buffer is corrupt, but recovery just read the buffer with no buffer ops specified:
error = xfs_buf_read(mp->m_ddev_targp, buf_f->blf_blkno, buf_f->blf_len, buf_flags, &bp, NULL);
Skipping the buffer leaves its contents in memory unverified. This sets us up for a kernel crash because xfs_refcount_recover_cow_leftovers reads the buffer (which is still around in XBF_DONE state, so no read verification) and creates a refcountbt cursor of height 32. This is impossible so we run off the end of the cursor object and crash.
Fix this by invoking the verifier on all skipped buffers and aborting log recovery if the ondisk buffer is corrupt. It might be smarter to force replay the log item atop the buffer and then see if it'll pass the write verifier (like ext4 does) but for now let's go with the conservative option where we stop immediately.
Link: https://syzkaller.appspot.com/bug?extid=7e9494b8b399902e994e Signed-off-by: Darrick J. Wong djwong@kernel.org Reviewed-by: Dave Chinner dchinner@redhat.com Signed-off-by: Dave Chinner david@fromorbit.com Signed-off-by: Leah Rumancik leah.rumancik@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/xfs/xfs_buf_item_recover.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
--- a/fs/xfs/xfs_buf_item_recover.c +++ b/fs/xfs/xfs_buf_item_recover.c @@ -924,6 +924,16 @@ xlog_recover_buf_commit_pass2( if (lsn && lsn != -1 && XFS_LSN_CMP(lsn, current_lsn) >= 0) { trace_xfs_log_recover_buf_skip(log, buf_f); xlog_recover_validate_buf_type(mp, bp, buf_f, NULLCOMMITLSN); + + /* + * We're skipping replay of this buffer log item due to the log + * item LSN being behind the ondisk buffer. Verify the buffer + * contents since we aren't going to run the write verifier. + */ + if (bp->b_ops) { + bp->b_ops->verify_read(bp); + error = bp->b_error; + } goto out_release; }
From: Rui Wang wangrui@loongson.cn
commit cb95ea79b3fc772c5873a7a4532ab4c14a455da2 upstream.
This looks like a typo and that caused atomic64 test failed.
Signed-off-by: Rui Wang wangrui@loongson.cn Signed-off-by: Thomas Bogendoerfer tsbogend@alpha.franken.de Signed-off-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/mips/include/asm/atomic.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/mips/include/asm/atomic.h +++ b/arch/mips/include/asm/atomic.h @@ -203,7 +203,7 @@ ATOMIC_OPS(atomic64, xor, s64, ^=, xor, * The function returns the old value of @v minus @i. */ #define ATOMIC_SIP_OP(pfx, type, op, ll, sc) \ -static __inline__ int pfx##_sub_if_positive(type i, pfx##_t * v) \ +static __inline__ type pfx##_sub_if_positive(type i, pfx##_t * v) \ { \ type temp, result; \ \
From: Ville Syrjälä ville.syrjala@linux.intel.com
commit 439cf34c8e0a8a33d8c15a31be1b7423426bc765 upstream.
Make sure we don't assign an error pointer to crtc_state->mode_blob as that will break all kinds of places that assume either NULL or a valid pointer (eg. drm_property_blob_put()).
Cc: stable@vger.kernel.org Reported-by: fuyufan fuyufan@huawei.com Signed-off-by: Ville Syrjälä ville.syrjala@linux.intel.com Link: https://patchwork.freedesktop.org/patch/msgid/20220209091928.14766-1-ville.s... Acked-by: Maxime Ripard maxime@cerno.tech Signed-off-by: Fedor Pchelkin pchelkin@ispras.ru Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/gpu/drm/drm_atomic_uapi.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-)
--- a/drivers/gpu/drm/drm_atomic_uapi.c +++ b/drivers/gpu/drm/drm_atomic_uapi.c @@ -75,15 +75,17 @@ int drm_atomic_set_mode_for_crtc(struct state->mode_blob = NULL;
if (mode) { + struct drm_property_blob *blob; + drm_mode_convert_to_umode(&umode, mode); - state->mode_blob = - drm_property_create_blob(state->crtc->dev, - sizeof(umode), - &umode); - if (IS_ERR(state->mode_blob)) - return PTR_ERR(state->mode_blob); + blob = drm_property_create_blob(crtc->dev, + sizeof(umode), &umode); + if (IS_ERR(blob)) + return PTR_ERR(blob);
drm_mode_copy(&state->mode, mode); + + state->mode_blob = blob; state->enable = true; DRM_DEBUG_ATOMIC("Set [MODE:%s] for [CRTC:%d:%s] state %p\n", mode->name, crtc->base.id, crtc->name, state);
From: Josef Bacik josef@toxicpanda.com
commit fb686c6824dd6294ca772b92424b8fba666e7d00 upstream.
There are a few places where we don't check the return value of btrfs_commit_transaction in relocation.c. Thankfully all these places have straightforward error handling, so simply change all of the sites at once.
Reviewed-by: Qu Wenruo wqu@suse.com Signed-off-by: Josef Bacik josef@toxicpanda.com Reviewed-by: David Sterba dsterba@suse.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Stefan Ghinea stefan.ghinea@windriver.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/btrfs/relocation.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-)
--- a/fs/btrfs/relocation.c +++ b/fs/btrfs/relocation.c @@ -1895,7 +1895,7 @@ again: list_splice(&reloc_roots, &rc->reloc_roots);
if (!err) - btrfs_commit_transaction(trans); + err = btrfs_commit_transaction(trans); else btrfs_end_transaction(trans); return err; @@ -3270,8 +3270,7 @@ int prepare_to_relocate(struct reloc_con */ return PTR_ERR(trans); } - btrfs_commit_transaction(trans); - return 0; + return btrfs_commit_transaction(trans); }
static noinline_for_stack int relocate_block_group(struct reloc_control *rc) @@ -3443,7 +3442,9 @@ restart: err = PTR_ERR(trans); goto out_free; } - btrfs_commit_transaction(trans); + ret = btrfs_commit_transaction(trans); + if (ret && !err) + err = ret; out_free: ret = clean_dirty_subvols(rc); if (ret < 0 && !err)
From: Zixuan Fu r33s3n6@gmail.com
commit 85f02d6c856b9f3a0acf5219de6e32f58b9778eb upstream.
In btrfs_relocate_block_group(), the rc is allocated. Then btrfs_relocate_block_group() calls
relocate_block_group() prepare_to_relocate() set_reloc_control()
that assigns rc to the variable fs_info->reloc_ctl. When prepare_to_relocate() returns, it calls
btrfs_commit_transaction() btrfs_start_dirty_block_groups() btrfs_alloc_path() kmem_cache_zalloc()
which may fail for example (or other errors could happen). When the failure occurs, btrfs_relocate_block_group() detects the error and frees rc and doesn't set fs_info->reloc_ctl to NULL. After that, in btrfs_init_reloc_root(), rc is retrieved from fs_info->reloc_ctl and then used, which may cause a use-after-free bug.
This possible bug can be triggered by calling btrfs_ioctl_balance() before calling btrfs_ioctl_defrag().
To fix this possible bug, in prepare_to_relocate(), check if btrfs_commit_transaction() fails. If the failure occurs, unset_reloc_control() is called to set fs_info->reloc_ctl to NULL.
The error log in our fault-injection testing is shown as follows:
[ 58.751070] BUG: KASAN: use-after-free in btrfs_init_reloc_root+0x7ca/0x920 [btrfs] ... [ 58.753577] Call Trace: ... [ 58.755800] kasan_report+0x45/0x60 [ 58.756066] btrfs_init_reloc_root+0x7ca/0x920 [btrfs] [ 58.757304] record_root_in_trans+0x792/0xa10 [btrfs] [ 58.757748] btrfs_record_root_in_trans+0x463/0x4f0 [btrfs] [ 58.758231] start_transaction+0x896/0x2950 [btrfs] [ 58.758661] btrfs_defrag_root+0x250/0xc00 [btrfs] [ 58.759083] btrfs_ioctl_defrag+0x467/0xa00 [btrfs] [ 58.759513] btrfs_ioctl+0x3c95/0x114e0 [btrfs] ... [ 58.768510] Allocated by task 23683: [ 58.768777] ____kasan_kmalloc+0xb5/0xf0 [ 58.769069] __kmalloc+0x227/0x3d0 [ 58.769325] alloc_reloc_control+0x10a/0x3d0 [btrfs] [ 58.769755] btrfs_relocate_block_group+0x7aa/0x1e20 [btrfs] [ 58.770228] btrfs_relocate_chunk+0xf1/0x760 [btrfs] [ 58.770655] __btrfs_balance+0x1326/0x1f10 [btrfs] [ 58.771071] btrfs_balance+0x3150/0x3d30 [btrfs] [ 58.771472] btrfs_ioctl_balance+0xd84/0x1410 [btrfs] [ 58.771902] btrfs_ioctl+0x4caa/0x114e0 [btrfs] ... [ 58.773337] Freed by task 23683: ... [ 58.774815] kfree+0xda/0x2b0 [ 58.775038] free_reloc_control+0x1d6/0x220 [btrfs] [ 58.775465] btrfs_relocate_block_group+0x115c/0x1e20 [btrfs] [ 58.775944] btrfs_relocate_chunk+0xf1/0x760 [btrfs] [ 58.776369] __btrfs_balance+0x1326/0x1f10 [btrfs] [ 58.776784] btrfs_balance+0x3150/0x3d30 [btrfs] [ 58.777185] btrfs_ioctl_balance+0xd84/0x1410 [btrfs] [ 58.777621] btrfs_ioctl+0x4caa/0x114e0 [btrfs] ...
Reported-by: TOTE Robot oslab@tsinghua.edu.cn CC: stable@vger.kernel.org # 5.15+ Reviewed-by: Sweet Tea Dorminy sweettea-kernel@dorminy.me Reviewed-by: Nikolay Borisov nborisov@suse.com Signed-off-by: Zixuan Fu r33s3n6@gmail.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Stefan Ghinea stefan.ghinea@windriver.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- fs/btrfs/relocation.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)
--- a/fs/btrfs/relocation.c +++ b/fs/btrfs/relocation.c @@ -3270,7 +3270,12 @@ int prepare_to_relocate(struct reloc_con */ return PTR_ERR(trans); } - return btrfs_commit_transaction(trans); + + ret = btrfs_commit_transaction(trans); + if (ret) + unset_reloc_control(rc); + + return ret; }
static noinline_for_stack int relocate_block_group(struct reloc_control *rc)
From: Greg Kroah-Hartman gregkh@linuxfoundation.org
This reverts commit bb1313f37e7b267fcf0fe475b974be8de5f39945 which is commit fda2093860df4812d69052a8cf4997e53853a340 upstream.
Ben reports that this should not have been backported to the older kernels as the rest of the macro is not empty. It was a clean-up patch in 6.4-rc1 only, it did not add new device ids.
Reported-by: Ben Hutchings ben@decadent.org.uk Cc: Philipp Hortmann philipp.g.hortmann@gmail.com Cc: Sasha Levin sashal@kernel.org Link: https://lore.kernel.org/r/aa0d401a7f63448cd4c2fe4a2d7e8495d9aa123e.camel@dec... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/staging/rtl8192e/rtl8192e/rtl_core.c | 6 +++--- drivers/staging/rtl8192e/rtl8192e/rtl_core.h | 5 +++++ 2 files changed, 8 insertions(+), 3 deletions(-)
--- a/drivers/staging/rtl8192e/rtl8192e/rtl_core.c +++ b/drivers/staging/rtl8192e/rtl8192e/rtl_core.c @@ -50,9 +50,9 @@ static const struct rtl819x_ops rtl819xp };
static struct pci_device_id rtl8192_pci_id_tbl[] = { - {PCI_DEVICE(0x10ec, 0x8192)}, - {PCI_DEVICE(0x07aa, 0x0044)}, - {PCI_DEVICE(0x07aa, 0x0047)}, + {RTL_PCI_DEVICE(0x10ec, 0x8192, rtl819xp_ops)}, + {RTL_PCI_DEVICE(0x07aa, 0x0044, rtl819xp_ops)}, + {RTL_PCI_DEVICE(0x07aa, 0x0047, rtl819xp_ops)}, {} };
--- a/drivers/staging/rtl8192e/rtl8192e/rtl_core.h +++ b/drivers/staging/rtl8192e/rtl8192e/rtl_core.h @@ -55,6 +55,11 @@ #define IS_HARDWARE_TYPE_8192SE(_priv) \ (((struct r8192_priv *)rtllib_priv(dev))->card_8192 == NIC_8192SE)
+#define RTL_PCI_DEVICE(vend, dev, cfg) \ + .vendor = (vend), .device = (dev), \ + .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, \ + .driver_data = (kernel_ulong_t)&(cfg) + #define TOTAL_CAM_ENTRY 32 #define CAM_CONTENT_COUNT 8
Hello Greg,
From: Greg Kroah-Hartman gregkh@linuxfoundation.org Sent: Monday, June 12, 2023 11:26 AM
This is the start of the stable review cycle for the 5.10.184 release. There are 68 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 14 Jun 2023 10:16:41 +0000. Anything received after that time might be too late.
Thank you for the release!
CIP configurations built and booted okay with Linux 5.10.184-rc1 (32cae866b182): https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/pipelines/89... https://gitlab.com/cip-project/cip-testing/linux-stable-rc-ci/-/commits/linu...
Tested-by: Chris Paterson (CIP) chris.paterson2@renesas.com
Kind regards, Chris
On 6/12/23 04:25, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 5.10.184 release. There are 68 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 14 Jun 2023 10:16:41 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.184-rc... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y and the diffstat can be found below.
thanks,
greg k-h
Compiled and booted on my test system. No dmesg regressions.
Tested-by: Shuah Khan skhan@linuxfoundation.org
thanks, -- Shuah
On Mon, 12 Jun 2023 12:25:52 +0200, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 5.10.184 release. There are 68 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 14 Jun 2023 10:16:41 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.184-rc... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y and the diffstat can be found below.
thanks,
greg k-h
All tests passing for Tegra ...
Test results for stable-v5.10: 11 builds: 11 pass, 0 fail 28 boots: 28 pass, 0 fail 75 tests: 75 pass, 0 fail
Linux version: 5.10.184-rc1-g32cae866b182 Boards tested: tegra124-jetson-tk1, tegra186-p2771-0000, tegra194-p2972-0000, tegra194-p3509-0000+p3668-0000, tegra20-ventana, tegra210-p2371-2180, tegra210-p3450-0000, tegra30-cardhu-a04
Tested-by: Jon Hunter jonathanh@nvidia.com
Jon
On Mon, 12 Jun 2023 at 16:03, Greg Kroah-Hartman gregkh@linuxfoundation.org wrote:
This is the start of the stable review cycle for the 5.10.184 release. There are 68 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 14 Jun 2023 10:16:41 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.184-rc... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y and the diffstat can be found below.
thanks,
greg k-h
Results from Linaro’s test farm. No regressions on arm64, arm, x86_64, and i386.
Tested-by: Linux Kernel Functional Testing lkft@linaro.org
## Build * kernel: 5.10.184-rc1 * git: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git * git branch: linux-5.10.y * git commit: 32cae866b1825021bd263dbd8dbb522e1d0df8a6 * git describe: v5.10.183-69-g32cae866b182 * test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-linux-5.10.y/build/v5.10....
## Test Regressions (compared to v5.10.183)
## Metric Regressions (compared to v5.10.183)
## Test Fixes (compared to v5.10.183)
## Metric Fixes (compared to v5.10.183)
## Test result summary total: 127773, pass: 107744, fail: 3845, skip: 16007, xfail: 177
## Build Summary * arc: 5 total, 5 passed, 0 failed * arm: 117 total, 116 passed, 1 failed * arm64: 45 total, 43 passed, 2 failed * i386: 35 total, 32 passed, 3 failed * mips: 27 total, 26 passed, 1 failed * parisc: 4 total, 4 passed, 0 failed * powerpc: 26 total, 25 passed, 1 failed * riscv: 12 total, 11 passed, 1 failed * s390: 12 total, 12 passed, 0 failed * sh: 14 total, 12 passed, 2 failed * sparc: 8 total, 8 passed, 0 failed * x86_64: 38 total, 36 passed, 2 failed
## Test suites summary * boot * fwts * igt-gpu-tools * kselftest-android * kselftest-arm64 * kselftest-breakpoints * kselftest-capabilities * kselftest-cgroup * kselftest-clone3 * kselftest-core * kselftest-cpu-hotplug * kselftest-cpufreq * kselftest-drivers-dma-buf * kselftest-efivarfs * kselftest-exec * kselftest-filesystems * kselftest-filesystems-binderfs * kselftest-firmware * kselftest-fpu * kselftest-ftrace * kselftest-futex * kselftest-gpio * kselftest-intel_pstate * kselftest-ipc * kselftest-ir * kselftest-kcmp * kselftest-kexec * kselftest-kvm * kselftest-lib * kselftest-livepatch * kselftest-membarrier * kselftest-memfd * kselftest-memory-hotplug * kselftest-mincore * kselftest-mount * kselftest-mqueue * kselftest-net * kselftest-net-forwarding * kselftest-net-mptcp * kselftest-netfilter * kselftest-nsfs * kselftest-openat2 * kselftest-pid_namespace * kselftest-pidfd * kselftest-proc * kselftest-pstore * kselftest-ptrace * kselftest-rseq * kselftest-rtc * kselftest-sigaltstack * kselftest-size * kselftest-tc-testing * kselftest-timens * kselftest-timers * kselftest-tmpfs * kselftest-tpm2 * kselftest-user * kselftest-user_events * kselftest-vDSO * kselftest-watchdog * kselftest-x86 * kselftest-zram * kunit * kvm-unit-tests * libgpiod * libhugetlbfs * log-parser-boot * log-parser-test * ltp-cap_bounds * ltp-commands * ltp-containers * ltp-controllers * ltp-cpuhotplug * ltp-crypto * ltp-cve * ltp-dio * ltp-fcntl-locktests * ltp-filecaps * ltp-fs * ltp-fs_bind * ltp-fs_perms_simple * ltp-fsx * ltp-hugetlb * ltp-io * ltp-ipc * ltp-math * ltp-mm * ltp-nptl * ltp-pty * ltp-sched * ltp-securebits * ltp-smoke * ltp-syscalls * ltp-tracing * network-basic-tests * perf * rcutorture * v4l2-compliance * vdso
-- Linaro LKFT https://lkft.linaro.org
Hi Greg,
On Mon, Jun 12, 2023 at 12:25:52PM +0200, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 5.10.184 release. There are 68 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Build test (gcc version 11.3.1 20230511): mips: 63 configs -> no failure arm: 104 configs -> no failure arm64: 3 configs -> no failure x86_64: 4 configs -> no failure alpha allmodconfig -> no failure powerpc allmodconfig -> no failure riscv allmodconfig -> no failure s390 allmodconfig -> no failure xtensa allmodconfig -> no failure
Boot test: x86_64: Booted on my test laptop. No regression. x86_64: Booted on qemu. No regression. [1] arm64: Booted on rpi4b (4GB model). No regression. [2]
[1]. https://openqa.qa.codethink.co.uk/tests/3913 [2]. https://openqa.qa.codethink.co.uk/tests/3914
Tested-by: Sudip Mukherjee sudip.mukherjee@codethink.co.uk
On 6/12/23 03:25, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 5.10.184 release. There are 68 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 14 Jun 2023 10:16:41 +0000. Anything received after that time might be too late.
Am I the only one seeing this problem ?
Build reference: v5.10.183-69-g32cae866b182 Compiler version: x86_64-linux-gcc (GCC) 11.3.0 Assembler version: GNU assembler (GNU Binutils) 2.39
Building x86_64:allyesconfig ... failed -------------- Error log: x86_64-linux-objcopy: vmlinux: unsupported relocation type 0x44 x86_64-linux-objcopy: vmlinux[.text]: relocation count is negative: bad value make[3]: *** [arch/x86/boot/compressed/Makefile:114: arch/x86/boot/compressed/vmlinux.bin] Error 1 make[3]: *** Waiting for unfinished jobs.... Unsupported relocation type: unknown type rel type name (-1939958716) make[3]: *** [arch/x86/boot/compressed/Makefile:122: arch/x86/boot/compressed/vmlinux.relocs] Error 1 make[3]: *** Deleting file 'arch/x86/boot/compressed/vmlinux.relocs' make[2]: *** [arch/x86/boot/Makefile:115: arch/x86/boot/compressed/vmlinux] Error 2 make[1]: *** [arch/x86/Makefile:274: bzImage] Error 2 make: *** [Makefile:192: __sub-make] Error 2
It affects 5.4.y and 5.10.y for me.
Guenter
On Tue, Jun 13, 2023 at 09:35:37AM -0700, Guenter Roeck wrote:
On 6/12/23 03:25, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 5.10.184 release. There are 68 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 14 Jun 2023 10:16:41 +0000. Anything received after that time might be too late.
Am I the only one seeing this problem ?
Build reference: v5.10.183-69-g32cae866b182 Compiler version: x86_64-linux-gcc (GCC) 11.3.0 Assembler version: GNU assembler (GNU Binutils) 2.39
Building x86_64:allyesconfig ... failed
Error log: x86_64-linux-objcopy: vmlinux: unsupported relocation type 0x44 x86_64-linux-objcopy: vmlinux[.text]: relocation count is negative: bad value make[3]: *** [arch/x86/boot/compressed/Makefile:114: arch/x86/boot/compressed/vmlinux.bin] Error 1 make[3]: *** Waiting for unfinished jobs.... Unsupported relocation type: unknown type rel type name (-1939958716) make[3]: *** [arch/x86/boot/compressed/Makefile:122: arch/x86/boot/compressed/vmlinux.relocs] Error 1 make[3]: *** Deleting file 'arch/x86/boot/compressed/vmlinux.relocs' make[2]: *** [arch/x86/boot/Makefile:115: arch/x86/boot/compressed/vmlinux] Error 2 make[1]: *** [arch/x86/Makefile:274: bzImage] Error 2 make: *** [Makefile:192: __sub-make] Error 2
It affects 5.4.y and 5.10.y for me.
Odd. Let me go build with gcc-11, I have just moved to gcc-12 on those two branches locally...
thanks,
greg k-h
On 6/13/23 10:36, Greg Kroah-Hartman wrote:
On Tue, Jun 13, 2023 at 09:35:37AM -0700, Guenter Roeck wrote:
On 6/12/23 03:25, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 5.10.184 release. There are 68 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 14 Jun 2023 10:16:41 +0000. Anything received after that time might be too late.
Am I the only one seeing this problem ?
Build reference: v5.10.183-69-g32cae866b182 Compiler version: x86_64-linux-gcc (GCC) 11.3.0 Assembler version: GNU assembler (GNU Binutils) 2.39
Building x86_64:allyesconfig ... failed
Error log: x86_64-linux-objcopy: vmlinux: unsupported relocation type 0x44 x86_64-linux-objcopy: vmlinux[.text]: relocation count is negative: bad value make[3]: *** [arch/x86/boot/compressed/Makefile:114: arch/x86/boot/compressed/vmlinux.bin] Error 1 make[3]: *** Waiting for unfinished jobs.... Unsupported relocation type: unknown type rel type name (-1939958716) make[3]: *** [arch/x86/boot/compressed/Makefile:122: arch/x86/boot/compressed/vmlinux.relocs] Error 1 make[3]: *** Deleting file 'arch/x86/boot/compressed/vmlinux.relocs' make[2]: *** [arch/x86/boot/Makefile:115: arch/x86/boot/compressed/vmlinux] Error 2 make[1]: *** [arch/x86/Makefile:274: bzImage] Error 2 make: *** [Makefile:192: __sub-make] Error 2
It affects 5.4.y and 5.10.y for me.
Odd. Let me go build with gcc-11, I have just moved to gcc-12 on those two branches locally...
Don't bother. This seems to be related to my build environment, not to the kernel. Rebuilding passed on different servers. It may have to do with my recent update to Ubuntu 22.04 on the server experiencing the problem. I'll try to figure out what is going on. Sorry for the noise.
Guenter
This is the start of the stable review cycle for the 5.10.184 release. There are 68 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 14 Jun 2023 10:16:41 +0000. Anything received after that time might be too late.
The whole patch series can be found in one patch at: https://www.kernel.org/pub/linux/kernel/v5.x/stable-review/patch-5.10.184-rc... or in the git tree and branch at: git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-5.10.y and the diffstat can be found below.
thanks,
greg k-h
Compiled and booted on my x86_64 and ARM64 test systems. No errors or regressions.
Tested-by: Allen Pais apais@linux.microsoft.com
Thanks.
On Mon, Jun 12, 2023 at 12:25:52PM +0200, Greg Kroah-Hartman wrote:
This is the start of the stable review cycle for the 5.10.184 release. There are 68 patches in this series, all will be posted as a response to this one. If anyone has any issues with these being applied, please let me know.
Responses should be made by Wed, 14 Jun 2023 10:16:41 +0000. Anything received after that time might be too late.
Build results: total: 162 pass: 162 fail: 0 Qemu test results: total: 485 pass: 485 fail: 0
Tested-by: Guenter Roeck linux@roeck-us.net
Guenter
linux-stable-mirror@lists.linaro.org