FAILED: patch "[PATCH] arm64: dts: ti: k3-am62*: Move eMMC pinmux to top level board" failed to apply to 6.12-stable tree
The patch below does not apply to the 6.12-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to stable@vger.kernel.org.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y git checkout FETCH_HEAD git cherry-pick -x a0b8da04153eb61cc2eaeeea5cc404e91e557f6b # <resolve conflicts, build, test, etc.> git commit -s git send-email --to 'stable@vger.kernel.org' --in-reply-to '2025082104-undermost-dispute-929c@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From a0b8da04153eb61cc2eaeeea5cc404e91e557f6b Mon Sep 17 00:00:00 2001 From: Judith Mendez jm@ti.com Date: Mon, 7 Jul 2025 14:08:30 -0500 Subject: [PATCH] arm64: dts: ti: k3-am62*: Move eMMC pinmux to top level board file
This moves pinmux child nodes for sdhci0 node from k3-am62x-sk-common to each top level board file. This is needed since we require internal pullups for AM62x SK and not for AM62 LP SK since it has external pullups on DATA 1-7.
Internal pulls are required for AM62 SK as per JESD84 spec recommendation to prevent unconnected lines floating.
Fixes: d19a66ae488a ("arm64: dts: ti: k3-am625-sk: Enable on board peripherals") Cc: stable@vger.kernel.org Signed-off-by: Judith Mendez jm@ti.com Link: https://lore.kernel.org/r/20250707190830.3951619-1-jm@ti.com Signed-off-by: Vignesh Raghavendra vigneshr@ti.com
diff --git a/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts b/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts index aafdb90c0eb7..4609f366006e 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts @@ -74,6 +74,22 @@ vddshv_sdio: regulator-4 { };
&main_pmx0 { + main_mmc0_pins_default: main-mmc0-default-pins { + bootph-all; + pinctrl-single,pins = < + AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (V3) MMC0_CMD */ + AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (Y1) MMC0_CLK */ + AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (V2) MMC0_DAT0 */ + AM62X_IOPAD(0x210, PIN_INPUT, 0) /* (V1) MMC0_DAT1 */ + AM62X_IOPAD(0x20c, PIN_INPUT, 0) /* (W2) MMC0_DAT2 */ + AM62X_IOPAD(0x208, PIN_INPUT, 0) /* (W1) MMC0_DAT3 */ + AM62X_IOPAD(0x204, PIN_INPUT, 0) /* (Y2) MMC0_DAT4 */ + AM62X_IOPAD(0x200, PIN_INPUT, 0) /* (W3) MMC0_DAT5 */ + AM62X_IOPAD(0x1fc, PIN_INPUT, 0) /* (W4) MMC0_DAT6 */ + AM62X_IOPAD(0x1f8, PIN_INPUT, 0) /* (V4) MMC0_DAT7 */ + >; + }; + vddshv_sdio_pins_default: vddshv-sdio-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x07c, PIN_OUTPUT, 7) /* (M19) GPMC0_CLK.GPIO0_31 */ @@ -144,6 +160,14 @@ exp2: gpio@23 { }; };
+&sdhci0 { + bootph-all; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc0_pins_default>; + status = "okay"; +}; + &sdhci1 { vmmc-supply = <&vdd_mmc1>; vqmmc-supply = <&vddshv_sdio>; diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk.dts b/arch/arm64/boot/dts/ti/k3-am625-sk.dts index 2fbfa3719345..d240165bda9c 100644 --- a/arch/arm64/boot/dts/ti/k3-am625-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am625-sk.dts @@ -106,6 +106,22 @@ vcc_1v8: regulator-5 { };
&main_pmx0 { + main_mmc0_pins_default: main-mmc0-default-pins { + bootph-all; + pinctrl-single,pins = < + AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */ + AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (AB1) MMC0_CLK */ + AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */ + AM62X_IOPAD(0x210, PIN_INPUT_PULLUP, 0) /* (AA1) MMC0_DAT1 */ + AM62X_IOPAD(0x20c, PIN_INPUT_PULLUP, 0) /* (AA3) MMC0_DAT2 */ + AM62X_IOPAD(0x208, PIN_INPUT_PULLUP, 0) /* (Y4) MMC0_DAT3 */ + AM62X_IOPAD(0x204, PIN_INPUT_PULLUP, 0) /* (AB2) MMC0_DAT4 */ + AM62X_IOPAD(0x200, PIN_INPUT_PULLUP, 0) /* (AC1) MMC0_DAT5 */ + AM62X_IOPAD(0x1fc, PIN_INPUT_PULLUP, 0) /* (AD2) MMC0_DAT6 */ + AM62X_IOPAD(0x1f8, PIN_INPUT_PULLUP, 0) /* (AC2) MMC0_DAT7 */ + >; + }; + main_rgmii2_pins_default: main-rgmii2-default-pins { bootph-all; pinctrl-single,pins = < @@ -195,6 +211,14 @@ exp1: gpio@22 { }; };
+&sdhci0 { + bootph-all; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc0_pins_default>; + status = "okay"; +}; + &sdhci1 { vmmc-supply = <&vdd_mmc1>; vqmmc-supply = <&vdd_sd_dv>; diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi index ee8337bfbbfd..13e1d36123d5 100644 --- a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi @@ -203,22 +203,6 @@ AM62X_IOPAD(0x0b4, PIN_INPUT_PULLUP, 1) /* (K24/H19) GPMC0_CSn3.I2C2_SDA */ >; };
- main_mmc0_pins_default: main-mmc0-default-pins { - bootph-all; - pinctrl-single,pins = < - AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (Y3/V3) MMC0_CMD */ - AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (AB1/Y1) MMC0_CLK */ - AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (AA2/V2) MMC0_DAT0 */ - AM62X_IOPAD(0x210, PIN_INPUT, 0) /* (AA1/V1) MMC0_DAT1 */ - AM62X_IOPAD(0x20c, PIN_INPUT, 0) /* (AA3/W2) MMC0_DAT2 */ - AM62X_IOPAD(0x208, PIN_INPUT, 0) /* (Y4/W1) MMC0_DAT3 */ - AM62X_IOPAD(0x204, PIN_INPUT, 0) /* (AB2/Y2) MMC0_DAT4 */ - AM62X_IOPAD(0x200, PIN_INPUT, 0) /* (AC1/W3) MMC0_DAT5 */ - AM62X_IOPAD(0x1fc, PIN_INPUT, 0) /* (AD2/W4) MMC0_DAT6 */ - AM62X_IOPAD(0x1f8, PIN_INPUT, 0) /* (AC2/V4) MMC0_DAT7 */ - >; - }; - main_mmc1_pins_default: main-mmc1-default-pins { bootph-all; pinctrl-single,pins = < @@ -457,14 +441,6 @@ &main_i2c2 { clock-frequency = <400000>; };
-&sdhci0 { - bootph-all; - status = "okay"; - non-removable; - pinctrl-names = "default"; - pinctrl-0 = <&main_mmc0_pins_default>; -}; - &sdhci1 { /* SD/MMC */ bootph-all;
From: Judith Mendez jm@ti.com
[ Upstream commit db3cd905b8c8cd40f15a34e30a225704bb8a2fcb ]
The bootph-all flag was introduced in dt-schema (dtschema/schemas/bootph.yaml) to define node usage across different boot phases.
For eMMC and SD boot modes, voltage regulator nodes, io-expander nodes, gpio nodes, and MMC nodes need to be present in all boot stages, so add missing bootph-all phase flag to these nodes to support SD boot and eMMC boot.
Signed-off-by: Judith Mendez jm@ti.com Reviewed-by: Moteen Shah m-shah@ti.com Link: https://lore.kernel.org/r/20250429151454.4160506-2-jm@ti.com Signed-off-by: Nishanth Menon nm@ti.com Stable-dep-of: a0b8da04153e ("arm64: dts: ti: k3-am62*: Move eMMC pinmux to top level board file") Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts | 12 ++++++++++++ arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 2 ++ 2 files changed, 14 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts b/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts index 8e9fc00a6b3c..aafdb90c0eb7 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts @@ -69,6 +69,7 @@ vddshv_sdio: regulator-4 { gpios = <&main_gpio0 31 GPIO_ACTIVE_HIGH>; states = <1800000 0x0>, <3300000 0x1>; + bootph-all; }; };
@@ -77,12 +78,14 @@ vddshv_sdio_pins_default: vddshv-sdio-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x07c, PIN_OUTPUT, 7) /* (M19) GPMC0_CLK.GPIO0_31 */ >; + bootph-all; };
main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x01d4, PIN_INPUT, 7) /* (C13) UART0_RTSn.GPIO1_23 */ >; + bootph-all; };
pmic_irq_pins_default: pmic-irq-default-pins { @@ -118,6 +121,7 @@ exp1: gpio@22 {
pinctrl-names = "default"; pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>; + bootph-all; };
exp2: gpio@23 { @@ -229,6 +233,14 @@ &tlv320aic3106 { DVDD-supply = <&buck2_reg>; };
+&main_gpio0 { + bootph-all; +}; + +&main_gpio1 { + bootph-all; +}; + &gpmc0 { ranges = <0 0 0x00 0x51000000 0x01000000>; /* CS0 space. Min partition = 16MB */ }; diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts index 67faf46d7a35..212119959dfd 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts @@ -301,6 +301,7 @@ AM62AX_IOPAD(0x200, PIN_INPUT_PULLUP, 0) /* (AC1) MMC0_DAT5 */ AM62AX_IOPAD(0x1fc, PIN_INPUT_PULLUP, 0) /* (AD2) MMC0_DAT6 */ AM62AX_IOPAD(0x1f8, PIN_INPUT_PULLUP, 0) /* (AC2) MMC0_DAT7 */ >; + bootph-all; };
main_mmc1_pins_default: main-mmc1-default-pins { @@ -603,6 +604,7 @@ &sdhci0 { pinctrl-names = "default"; pinctrl-0 = <&main_mmc0_pins_default>; disable-wp; + bootph-all; };
&sdhci1 {
From: Judith Mendez jm@ti.com
[ Upstream commit d16e7d34352c4107a81888e9aab4ea4748076e70 ]
EMMC device is non-removable so add 'non-removable' DT property to avoid having to redetect the eMMC after suspend/resume.
Signed-off-by: Judith Mendez jm@ti.com Reviewed-by: Udit Kumar u-kumar1@ti.com Link: https://lore.kernel.org/r/20250429151454.4160506-3-jm@ti.com Signed-off-by: Nishanth Menon nm@ti.com Stable-dep-of: a0b8da04153e ("arm64: dts: ti: k3-am62*: Move eMMC pinmux to top level board file") Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts | 1 + arch/arm64/boot/dts/ti/k3-am62p5-sk.dts | 1 + arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi | 1 + 3 files changed, 3 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts index a1cd47d7f5e3..163dca41e23c 100644 --- a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts +++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts @@ -818,6 +818,7 @@ &main_spi2 {
&sdhci0 { bootph-all; + non-removable; pinctrl-names = "default"; pinctrl-0 = <&emmc_pins_default>; disable-wp; diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts index 3efa12bb7254..df989a5260c5 100644 --- a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts @@ -444,6 +444,7 @@ &main_i2c2 {
&sdhci0 { status = "okay"; + non-removable; ti,driver-strength-ohm = <50>; disable-wp; bootph-all; diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi index 44ff67b6bf1e..56d4584b7e24 100644 --- a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi @@ -416,6 +416,7 @@ &main_i2c2 { &sdhci0 { bootph-all; status = "okay"; + non-removable; pinctrl-names = "default"; pinctrl-0 = <&main_mmc0_pins_default>; disable-wp;
From: Judith Mendez jm@ti.com
[ Upstream commit ef839ba8142f14513ba396a033110526b7008096 ]
Remove disable-wp flag for eMMC nodes since this flag is only applicable to SD according to the binding doc (mmc/mmc-controller-common.yaml).
For eMMC, this flag should be ignored but lets remove anyways to cleanup sdhci nodes.
Signed-off-by: Judith Mendez jm@ti.com Reviewed-by: Moteen Shah m-shah@ti.com Link: https://lore.kernel.org/r/20250429151454.4160506-4-jm@ti.com Signed-off-by: Nishanth Menon nm@ti.com Stable-dep-of: a0b8da04153e ("arm64: dts: ti: k3-am62*: Move eMMC pinmux to top level board file") Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi | 1 - arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts | 1 - arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi | 1 - arch/arm64/boot/dts/ti/k3-am62a7-sk.dts | 1 - arch/arm64/boot/dts/ti/k3-am62p5-sk.dts | 1 - arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi | 1 - arch/arm64/boot/dts/ti/k3-am642-evm.dts | 1 - arch/arm64/boot/dts/ti/k3-am654-base-board.dts | 1 - arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi | 1 - arch/arm64/boot/dts/ti/k3-am69-sk.dts | 1 - 10 files changed, 10 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi index 43488cc8bcb1..ec87d18568fa 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi @@ -317,7 +317,6 @@ serial_flash: flash@0 { &sdhci0 { pinctrl-names = "default"; pinctrl-0 = <&main_mmc0_pins_default>; - disable-wp; non-removable; status = "okay"; }; diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts index 163dca41e23c..f6ef1549801b 100644 --- a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts +++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts @@ -821,7 +821,6 @@ &sdhci0 { non-removable; pinctrl-names = "default"; pinctrl-0 = <&emmc_pins_default>; - disable-wp; status = "okay"; };
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi index a5aceaa39670..960a409d6fea 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi @@ -324,7 +324,6 @@ serial_flash: flash@0 { &sdhci0 { pinctrl-names = "default"; pinctrl-0 = <&main_mmc0_pins_default>; - disable-wp; non-removable; status = "okay"; }; diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts index 212119959dfd..a3b349093ad6 100644 --- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts @@ -603,7 +603,6 @@ &sdhci0 { non-removable; pinctrl-names = "default"; pinctrl-0 = <&main_mmc0_pins_default>; - disable-wp; bootph-all; };
diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts index df989a5260c5..b94093a7a392 100644 --- a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts @@ -446,7 +446,6 @@ &sdhci0 { status = "okay"; non-removable; ti,driver-strength-ohm = <50>; - disable-wp; bootph-all; };
diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi index 56d4584b7e24..3314955a9499 100644 --- a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi @@ -419,7 +419,6 @@ &sdhci0 { non-removable; pinctrl-names = "default"; pinctrl-0 = <&main_mmc0_pins_default>; - disable-wp; };
&sdhci1 { diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts index 97ca16f00cd2..95c20e39342c 100644 --- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts +++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts @@ -584,7 +584,6 @@ &sdhci0 { status = "okay"; non-removable; ti,driver-strength-ohm = <50>; - disable-wp; bootph-all; };
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts index aa7139cc8a92..c30425960398 100644 --- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts +++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts @@ -456,7 +456,6 @@ &sdhci0 { bus-width = <8>; non-removable; ti,driver-strength-ohm = <50>; - disable-wp; };
/* diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi index ae842b85b70d..12af6cb7f65c 100644 --- a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-common.dtsi @@ -50,5 +50,4 @@ &sdhci0 { bus-width = <8>; non-removable; ti,driver-strength-ohm = <50>; - disable-wp; }; diff --git a/arch/arm64/boot/dts/ti/k3-am69-sk.dts b/arch/arm64/boot/dts/ti/k3-am69-sk.dts index 1e36965a1403..3238dd17016a 100644 --- a/arch/arm64/boot/dts/ti/k3-am69-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am69-sk.dts @@ -926,7 +926,6 @@ &main_sdhci0 { status = "okay"; non-removable; ti,driver-strength-ohm = <50>; - disable-wp; };
&main_sdhci1 {
From: Judith Mendez jm@ti.com
[ Upstream commit a0b8da04153eb61cc2eaeeea5cc404e91e557f6b ]
This moves pinmux child nodes for sdhci0 node from k3-am62x-sk-common to each top level board file. This is needed since we require internal pullups for AM62x SK and not for AM62 LP SK since it has external pullups on DATA 1-7.
Internal pulls are required for AM62 SK as per JESD84 spec recommendation to prevent unconnected lines floating.
Fixes: d19a66ae488a ("arm64: dts: ti: k3-am625-sk: Enable on board peripherals") Cc: stable@vger.kernel.org Signed-off-by: Judith Mendez jm@ti.com Link: https://lore.kernel.org/r/20250707190830.3951619-1-jm@ti.com Signed-off-by: Vignesh Raghavendra vigneshr@ti.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts | 24 +++++++++++++++++++ arch/arm64/boot/dts/ti/k3-am625-sk.dts | 24 +++++++++++++++++++ .../arm64/boot/dts/ti/k3-am62x-sk-common.dtsi | 24 ------------------- 3 files changed, 48 insertions(+), 24 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts b/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts index aafdb90c0eb7..4609f366006e 100644 --- a/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts @@ -74,6 +74,22 @@ vddshv_sdio: regulator-4 { };
&main_pmx0 { + main_mmc0_pins_default: main-mmc0-default-pins { + bootph-all; + pinctrl-single,pins = < + AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (V3) MMC0_CMD */ + AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (Y1) MMC0_CLK */ + AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (V2) MMC0_DAT0 */ + AM62X_IOPAD(0x210, PIN_INPUT, 0) /* (V1) MMC0_DAT1 */ + AM62X_IOPAD(0x20c, PIN_INPUT, 0) /* (W2) MMC0_DAT2 */ + AM62X_IOPAD(0x208, PIN_INPUT, 0) /* (W1) MMC0_DAT3 */ + AM62X_IOPAD(0x204, PIN_INPUT, 0) /* (Y2) MMC0_DAT4 */ + AM62X_IOPAD(0x200, PIN_INPUT, 0) /* (W3) MMC0_DAT5 */ + AM62X_IOPAD(0x1fc, PIN_INPUT, 0) /* (W4) MMC0_DAT6 */ + AM62X_IOPAD(0x1f8, PIN_INPUT, 0) /* (V4) MMC0_DAT7 */ + >; + }; + vddshv_sdio_pins_default: vddshv-sdio-default-pins { pinctrl-single,pins = < AM62X_IOPAD(0x07c, PIN_OUTPUT, 7) /* (M19) GPMC0_CLK.GPIO0_31 */ @@ -144,6 +160,14 @@ exp2: gpio@23 { }; };
+&sdhci0 { + bootph-all; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc0_pins_default>; + status = "okay"; +}; + &sdhci1 { vmmc-supply = <&vdd_mmc1>; vqmmc-supply = <&vddshv_sdio>; diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk.dts b/arch/arm64/boot/dts/ti/k3-am625-sk.dts index ae81ebb39d02..0fa11d3aa71e 100644 --- a/arch/arm64/boot/dts/ti/k3-am625-sk.dts +++ b/arch/arm64/boot/dts/ti/k3-am625-sk.dts @@ -106,6 +106,22 @@ vcc_1v8: regulator-5 { };
&main_pmx0 { + main_mmc0_pins_default: main-mmc0-default-pins { + bootph-all; + pinctrl-single,pins = < + AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */ + AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (AB1) MMC0_CLK */ + AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */ + AM62X_IOPAD(0x210, PIN_INPUT_PULLUP, 0) /* (AA1) MMC0_DAT1 */ + AM62X_IOPAD(0x20c, PIN_INPUT_PULLUP, 0) /* (AA3) MMC0_DAT2 */ + AM62X_IOPAD(0x208, PIN_INPUT_PULLUP, 0) /* (Y4) MMC0_DAT3 */ + AM62X_IOPAD(0x204, PIN_INPUT_PULLUP, 0) /* (AB2) MMC0_DAT4 */ + AM62X_IOPAD(0x200, PIN_INPUT_PULLUP, 0) /* (AC1) MMC0_DAT5 */ + AM62X_IOPAD(0x1fc, PIN_INPUT_PULLUP, 0) /* (AD2) MMC0_DAT6 */ + AM62X_IOPAD(0x1f8, PIN_INPUT_PULLUP, 0) /* (AC2) MMC0_DAT7 */ + >; + }; + main_rgmii2_pins_default: main-rgmii2-default-pins { bootph-all; pinctrl-single,pins = < @@ -195,6 +211,14 @@ exp1: gpio@22 { }; };
+&sdhci0 { + bootph-all; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&main_mmc0_pins_default>; + status = "okay"; +}; + &sdhci1 { vmmc-supply = <&vdd_mmc1>; vqmmc-supply = <&vdd_sd_dv>; diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi index 3314955a9499..4f2d45fd3676 100644 --- a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi @@ -182,22 +182,6 @@ AM62X_IOPAD(0x0b4, PIN_INPUT_PULLUP, 1) /* (K24/H19) GPMC0_CSn3.I2C2_SDA */ >; };
- main_mmc0_pins_default: main-mmc0-default-pins { - bootph-all; - pinctrl-single,pins = < - AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (Y3/V3) MMC0_CMD */ - AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (AB1/Y1) MMC0_CLK */ - AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (AA2/V2) MMC0_DAT0 */ - AM62X_IOPAD(0x210, PIN_INPUT, 0) /* (AA1/V1) MMC0_DAT1 */ - AM62X_IOPAD(0x20c, PIN_INPUT, 0) /* (AA3/W2) MMC0_DAT2 */ - AM62X_IOPAD(0x208, PIN_INPUT, 0) /* (Y4/W1) MMC0_DAT3 */ - AM62X_IOPAD(0x204, PIN_INPUT, 0) /* (AB2/Y2) MMC0_DAT4 */ - AM62X_IOPAD(0x200, PIN_INPUT, 0) /* (AC1/W3) MMC0_DAT5 */ - AM62X_IOPAD(0x1fc, PIN_INPUT, 0) /* (AD2/W4) MMC0_DAT6 */ - AM62X_IOPAD(0x1f8, PIN_INPUT, 0) /* (AC2/V4) MMC0_DAT7 */ - >; - }; - main_mmc1_pins_default: main-mmc1-default-pins { bootph-all; pinctrl-single,pins = < @@ -413,14 +397,6 @@ &main_i2c2 { clock-frequency = <400000>; };
-&sdhci0 { - bootph-all; - status = "okay"; - non-removable; - pinctrl-names = "default"; - pinctrl-0 = <&main_mmc0_pins_default>; -}; - &sdhci1 { /* SD/MMC */ bootph-all;
linux-stable-mirror@lists.linaro.org
-
gregkh＠linuxfoundation.org -
Sasha Levin