[PATCH AUTOSEL 4.19 01/13] ARM: dts: sun8i-a83t-tbs-a711: HM5065 doesn't like such a high voltage
From: Ondrej Jirman megous@megous.com
[ Upstream commit a40550952c000667b20082d58077bc647da6c890 ]
Lowering the voltage solves the quick image degradation over time (minutes), that was probably caused by overheating.
Signed-off-by: Ondrej Jirman megous@megous.com Signed-off-by: Maxime Ripard maxime@cerno.tech Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts index 49547a43cc90a..54cbdaf7ffdcc 100644 --- a/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts +++ b/arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts @@ -318,8 +318,8 @@ };
®_dldo3 { - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; regulator-name = "vdd-csi"; };
From: Ondrej Jirman megous@megous.com
[ Upstream commit a43ab30dcd4a1abcdd0d2461bf1cf7c0817f6cd3 ]
When doing a 16-bit read that returns data in the MSB byte, the RSB_DATA register will keep the MSB byte unchanged when doing the following 8-bit read. sunxi_rsb_read() will then return a result that contains high byte from 16-bit read mixed with the 8-bit result.
The consequence is that after this happens the PMIC's regmap will look like this: (0x33 is the high byte from the 16-bit read)
% cat /sys/kernel/debug/regmap/sunxi-rsb-3a3/registers 00: 33 01: 33 02: 33 03: 33 04: 33 05: 33 06: 33 07: 33 08: 33 09: 33 0a: 33 0b: 33 0c: 33 0d: 33 0e: 33 [snip]
Fix this by masking the result of the read with the correct mask based on the size of the read. There are no 16-bit users in the mainline kernel, so this doesn't need to get into the stable tree.
Signed-off-by: Ondrej Jirman megous@megous.com Acked-by: Chen-Yu Tsai wens@csie.org Signed-off-by: Maxime Ripard maxime@cerno.tech Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/bus/sunxi-rsb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/bus/sunxi-rsb.c b/drivers/bus/sunxi-rsb.c index 1b76d95859027..2ca2cc56bcef6 100644 --- a/drivers/bus/sunxi-rsb.c +++ b/drivers/bus/sunxi-rsb.c @@ -345,7 +345,7 @@ static int sunxi_rsb_read(struct sunxi_rsb *rsb, u8 rtaddr, u8 addr, if (ret) goto unlock;
- *buf = readl(rsb->regs + RSB_DATA); + *buf = readl(rsb->regs + RSB_DATA) & GENMASK(len * 8 - 1, 0);
unlock: mutex_unlock(&rsb->lock);
From: David Howells dhowells@redhat.com
[ Upstream commit 158fe6665389964a1de212818b4a5c52b7f7aff4 ]
Abstract out the calculation of there being sufficient Tx buffer space. This is reproduced several times in the rxrpc sendmsg code.
Signed-off-by: David Howells dhowells@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/rxrpc/sendmsg.c | 27 ++++++++++++++++++--------- 1 file changed, 18 insertions(+), 9 deletions(-)
diff --git a/net/rxrpc/sendmsg.c b/net/rxrpc/sendmsg.c index 3e54ead1e921a..68993439e1d91 100644 --- a/net/rxrpc/sendmsg.c +++ b/net/rxrpc/sendmsg.c @@ -21,6 +21,21 @@ #include <net/af_rxrpc.h> #include "ar-internal.h"
+/* + * Return true if there's sufficient Tx queue space. + */ +static bool rxrpc_check_tx_space(struct rxrpc_call *call, rxrpc_seq_t *_tx_win) +{ + unsigned int win_size = + min_t(unsigned int, call->tx_winsize, + call->cong_cwnd + call->cong_extra); + rxrpc_seq_t tx_win = READ_ONCE(call->tx_hard_ack); + + if (_tx_win) + *_tx_win = tx_win; + return call->tx_top - tx_win < win_size; +} + /* * Wait for space to appear in the Tx queue or a signal to occur. */ @@ -30,9 +45,7 @@ static int rxrpc_wait_for_tx_window_intr(struct rxrpc_sock *rx, { for (;;) { set_current_state(TASK_INTERRUPTIBLE); - if (call->tx_top - call->tx_hard_ack < - min_t(unsigned int, call->tx_winsize, - call->cong_cwnd + call->cong_extra)) + if (rxrpc_check_tx_space(call, NULL)) return 0;
if (call->state >= RXRPC_CALL_COMPLETE) @@ -72,9 +85,7 @@ static int rxrpc_wait_for_tx_window_nonintr(struct rxrpc_sock *rx, set_current_state(TASK_UNINTERRUPTIBLE);
tx_win = READ_ONCE(call->tx_hard_ack); - if (call->tx_top - tx_win < - min_t(unsigned int, call->tx_winsize, - call->cong_cwnd + call->cong_extra)) + if (rxrpc_check_tx_space(call, &tx_win)) return 0;
if (call->state >= RXRPC_CALL_COMPLETE) @@ -305,9 +316,7 @@ static int rxrpc_send_data(struct rxrpc_sock *rx,
_debug("alloc");
- if (call->tx_top - call->tx_hard_ack >= - min_t(unsigned int, call->tx_winsize, - call->cong_cwnd + call->cong_extra)) { + if (!rxrpc_check_tx_space(call, NULL)) { ret = -EAGAIN; if (msg->msg_flags & MSG_DONTWAIT) goto maybe_error;
From: David Howells dhowells@redhat.com
[ Upstream commit 498b577660f08cef5d9e78e0ed6dcd4c0939e98c ]
Fix the handling of sendmsg() with MSG_WAITALL for userspace to round the timeout for when a signal occurs up to at least two jiffies as a 1 jiffy timeout may end up being effectively 0 if jiffies wraps at the wrong time.
Fixes: bc5e3a546d55 ("rxrpc: Use MSG_WAITALL to tell sendmsg() to temporarily ignore signals") Signed-off-by: David Howells dhowells@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- net/rxrpc/sendmsg.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/net/rxrpc/sendmsg.c b/net/rxrpc/sendmsg.c index 68993439e1d91..7ee72053037a3 100644 --- a/net/rxrpc/sendmsg.c +++ b/net/rxrpc/sendmsg.c @@ -75,8 +75,8 @@ static int rxrpc_wait_for_tx_window_nonintr(struct rxrpc_sock *rx,
rtt = READ_ONCE(call->peer->rtt); rtt2 = nsecs_to_jiffies64(rtt) * 2; - if (rtt2 < 1) - rtt2 = 1; + if (rtt2 < 2) + rtt2 = 2;
timeout = rtt2; tx_start = READ_ONCE(call->tx_hard_ack);
From: Zheng Wei wei.zheng@vivo.com
[ Upstream commit b317538c47943f9903860d83cc0060409e12d2ff ]
printk in macro vxge_debug_ll uses __VA_ARGS__ without "##" prefix, it causes a build error when there is no variable arguments(e.g. only fmt is specified.).
Signed-off-by: Zheng Wei wei.zheng@vivo.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/neterion/vxge/vxge-config.h | 2 +- drivers/net/ethernet/neterion/vxge/vxge-main.h | 14 +++++++------- 2 files changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/neterion/vxge/vxge-config.h b/drivers/net/ethernet/neterion/vxge/vxge-config.h index d743a37a3cee8..e5dda2c27f187 100644 --- a/drivers/net/ethernet/neterion/vxge/vxge-config.h +++ b/drivers/net/ethernet/neterion/vxge/vxge-config.h @@ -2065,7 +2065,7 @@ vxge_hw_vpath_strip_fcs_check(struct __vxge_hw_device *hldev, u64 vpath_mask); if ((level >= VXGE_ERR && VXGE_COMPONENT_LL & VXGE_DEBUG_ERR_MASK) || \ (level >= VXGE_TRACE && VXGE_COMPONENT_LL & VXGE_DEBUG_TRACE_MASK))\ if ((mask & VXGE_DEBUG_MASK) == mask) \ - printk(fmt "\n", __VA_ARGS__); \ + printk(fmt "\n", ##__VA_ARGS__); \ } while (0) #else #define vxge_debug_ll(level, mask, fmt, ...) diff --git a/drivers/net/ethernet/neterion/vxge/vxge-main.h b/drivers/net/ethernet/neterion/vxge/vxge-main.h index 59a57ff5e96af..9c86f4f9cd424 100644 --- a/drivers/net/ethernet/neterion/vxge/vxge-main.h +++ b/drivers/net/ethernet/neterion/vxge/vxge-main.h @@ -452,49 +452,49 @@ int vxge_fw_upgrade(struct vxgedev *vdev, char *fw_name, int override);
#if (VXGE_DEBUG_LL_CONFIG & VXGE_DEBUG_MASK) #define vxge_debug_ll_config(level, fmt, ...) \ - vxge_debug_ll(level, VXGE_DEBUG_LL_CONFIG, fmt, __VA_ARGS__) + vxge_debug_ll(level, VXGE_DEBUG_LL_CONFIG, fmt, ##__VA_ARGS__) #else #define vxge_debug_ll_config(level, fmt, ...) #endif
#if (VXGE_DEBUG_INIT & VXGE_DEBUG_MASK) #define vxge_debug_init(level, fmt, ...) \ - vxge_debug_ll(level, VXGE_DEBUG_INIT, fmt, __VA_ARGS__) + vxge_debug_ll(level, VXGE_DEBUG_INIT, fmt, ##__VA_ARGS__) #else #define vxge_debug_init(level, fmt, ...) #endif
#if (VXGE_DEBUG_TX & VXGE_DEBUG_MASK) #define vxge_debug_tx(level, fmt, ...) \ - vxge_debug_ll(level, VXGE_DEBUG_TX, fmt, __VA_ARGS__) + vxge_debug_ll(level, VXGE_DEBUG_TX, fmt, ##__VA_ARGS__) #else #define vxge_debug_tx(level, fmt, ...) #endif
#if (VXGE_DEBUG_RX & VXGE_DEBUG_MASK) #define vxge_debug_rx(level, fmt, ...) \ - vxge_debug_ll(level, VXGE_DEBUG_RX, fmt, __VA_ARGS__) + vxge_debug_ll(level, VXGE_DEBUG_RX, fmt, ##__VA_ARGS__) #else #define vxge_debug_rx(level, fmt, ...) #endif
#if (VXGE_DEBUG_MEM & VXGE_DEBUG_MASK) #define vxge_debug_mem(level, fmt, ...) \ - vxge_debug_ll(level, VXGE_DEBUG_MEM, fmt, __VA_ARGS__) + vxge_debug_ll(level, VXGE_DEBUG_MEM, fmt, ##__VA_ARGS__) #else #define vxge_debug_mem(level, fmt, ...) #endif
#if (VXGE_DEBUG_ENTRYEXIT & VXGE_DEBUG_MASK) #define vxge_debug_entryexit(level, fmt, ...) \ - vxge_debug_ll(level, VXGE_DEBUG_ENTRYEXIT, fmt, __VA_ARGS__) + vxge_debug_ll(level, VXGE_DEBUG_ENTRYEXIT, fmt, ##__VA_ARGS__) #else #define vxge_debug_entryexit(level, fmt, ...) #endif
#if (VXGE_DEBUG_INTR & VXGE_DEBUG_MASK) #define vxge_debug_intr(level, fmt, ...) \ - vxge_debug_ll(level, VXGE_DEBUG_INTR, fmt, __VA_ARGS__) + vxge_debug_ll(level, VXGE_DEBUG_INTR, fmt, ##__VA_ARGS__) #else #define vxge_debug_intr(level, fmt, ...) #endif
From: Luo bin luobin9@huawei.com
[ Upstream commit 96758117dc528e6d84bd23d205e8cf7f31eda029 ]
it's unreliable for fw to check whether IO is stopped, so driver wait for enough time to ensure IO process is done in hw before freeing resources
Signed-off-by: Luo bin luobin9@huawei.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- .../net/ethernet/huawei/hinic/hinic_hw_dev.c | 51 +------------------ 1 file changed, 2 insertions(+), 49 deletions(-)
diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.c b/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.c index 9deec13d98e93..4c91c8ceac5f9 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_hw_dev.c @@ -370,50 +370,6 @@ static int wait_for_db_state(struct hinic_hwdev *hwdev) return -EFAULT; }
-static int wait_for_io_stopped(struct hinic_hwdev *hwdev) -{ - struct hinic_cmd_io_status cmd_io_status; - struct hinic_hwif *hwif = hwdev->hwif; - struct pci_dev *pdev = hwif->pdev; - struct hinic_pfhwdev *pfhwdev; - unsigned long end; - u16 out_size; - int err; - - if (!HINIC_IS_PF(hwif) && !HINIC_IS_PPF(hwif)) { - dev_err(&pdev->dev, "Unsupported PCI Function type\n"); - return -EINVAL; - } - - pfhwdev = container_of(hwdev, struct hinic_pfhwdev, hwdev); - - cmd_io_status.func_idx = HINIC_HWIF_FUNC_IDX(hwif); - - end = jiffies + msecs_to_jiffies(IO_STATUS_TIMEOUT); - do { - err = hinic_msg_to_mgmt(&pfhwdev->pf_to_mgmt, HINIC_MOD_COMM, - HINIC_COMM_CMD_IO_STATUS_GET, - &cmd_io_status, sizeof(cmd_io_status), - &cmd_io_status, &out_size, - HINIC_MGMT_MSG_SYNC); - if ((err) || (out_size != sizeof(cmd_io_status))) { - dev_err(&pdev->dev, "Failed to get IO status, ret = %d\n", - err); - return err; - } - - if (cmd_io_status.status == IO_STOPPED) { - dev_info(&pdev->dev, "IO stopped\n"); - return 0; - } - - msleep(20); - } while (time_before(jiffies, end)); - - dev_err(&pdev->dev, "Wait for IO stopped - Timeout\n"); - return -ETIMEDOUT; -} - /** * clear_io_resource - set the IO resources as not active in the NIC * @hwdev: the NIC HW device @@ -433,11 +389,8 @@ static int clear_io_resources(struct hinic_hwdev *hwdev) return -EINVAL; }
- err = wait_for_io_stopped(hwdev); - if (err) { - dev_err(&pdev->dev, "IO has not stopped yet\n"); - return err; - } + /* sleep 100ms to wait for firmware stopping I/O */ + msleep(100);
cmd_clear_io_res.func_idx = HINIC_HWIF_FUNC_IDX(hwif);
From: Luo bin luobin9@huawei.com
[ Upstream commit 0da7c322f116210ebfdda59c7da663a6fc5e9cc8 ]
the second input parameter of wait_for_completion_timeout should be jiffies instead of millisecond
Signed-off-by: Luo bin luobin9@huawei.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/huawei/hinic/hinic_hw_cmdq.c | 3 ++- drivers/net/ethernet/huawei/hinic/hinic_hw_mgmt.c | 5 +++-- 2 files changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_cmdq.c b/drivers/net/ethernet/huawei/hinic/hinic_hw_cmdq.c index 4d09ea786b35f..ee715bf785adf 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_hw_cmdq.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_hw_cmdq.c @@ -398,7 +398,8 @@ static int cmdq_sync_cmd_direct_resp(struct hinic_cmdq *cmdq,
spin_unlock_bh(&cmdq->cmdq_lock);
- if (!wait_for_completion_timeout(&done, CMDQ_TIMEOUT)) { + if (!wait_for_completion_timeout(&done, + msecs_to_jiffies(CMDQ_TIMEOUT))) { spin_lock_bh(&cmdq->cmdq_lock);
if (cmdq->errcode[curr_prod_idx] == &errcode) diff --git a/drivers/net/ethernet/huawei/hinic/hinic_hw_mgmt.c b/drivers/net/ethernet/huawei/hinic/hinic_hw_mgmt.c index 278dc13f3dae8..9fcf2e5e00039 100644 --- a/drivers/net/ethernet/huawei/hinic/hinic_hw_mgmt.c +++ b/drivers/net/ethernet/huawei/hinic/hinic_hw_mgmt.c @@ -52,7 +52,7 @@
#define MSG_NOT_RESP 0xFFFF
-#define MGMT_MSG_TIMEOUT 1000 +#define MGMT_MSG_TIMEOUT 5000
#define mgmt_to_pfhwdev(pf_mgmt) \ container_of(pf_mgmt, struct hinic_pfhwdev, pf_to_mgmt) @@ -276,7 +276,8 @@ static int msg_to_mgmt_sync(struct hinic_pf_to_mgmt *pf_to_mgmt, goto unlock_sync_msg; }
- if (!wait_for_completion_timeout(recv_done, MGMT_MSG_TIMEOUT)) { + if (!wait_for_completion_timeout(recv_done, + msecs_to_jiffies(MGMT_MSG_TIMEOUT))) { dev_err(&pdev->dev, "MGMT timeout, MSG id = %d\n", msg_id); err = -ETIMEDOUT; goto unlock_sync_msg;
From: Pablo Neira Ayuso pablo@netfilter.org
[ Upstream commit 8c2d45b2b65ca1f215244be1c600236e83f9815f ]
Currently, the -EEXIST return code of ->insert() callbacks is ambiguous: it might indicate that a given element (including intervals) already exists as such, or that the new element would clash with existing ones.
If identical elements already exist, the front-end is ignoring this without returning error, in case NLM_F_EXCL is not set. However, if the new element can't be inserted due an overlap, we should report this to the user.
To this purpose, allow set back-ends to return -ENOTEMPTY on collision with existing elements, translate that to -EEXIST, and return that to userspace, no matter if NLM_F_EXCL was set.
Reported-by: Phil Sutter phil@nwl.cc Signed-off-by: Stefano Brivio sbrivio@redhat.com Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/nf_tables_api.c | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 5881f66688171..71d6170e60b4f 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -4527,6 +4527,11 @@ static int nft_add_set_elem(struct nft_ctx *ctx, struct nft_set *set, err = -EBUSY; else if (!(nlmsg_flags & NLM_F_EXCL)) err = 0; + } else if (err == -ENOTEMPTY) { + /* ENOTEMPTY reports overlapping between this element + * and an existing one. + */ + err = -EEXIST; } goto err5; }
From: Stefano Brivio sbrivio@redhat.com
[ Upstream commit 6f7c9caf017be8ab0fe3b99509580d0793bf0833 ]
Replace negations of nft_rbtree_interval_end() with a new helper, nft_rbtree_interval_start(), wherever this helps to visualise the problem at hand, that is, for all the occurrences except for the comparison against given flags in __nft_rbtree_get().
This gets especially useful in the next patch.
Signed-off-by: Stefano Brivio sbrivio@redhat.com Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/nft_set_rbtree.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-)
diff --git a/net/netfilter/nft_set_rbtree.c b/net/netfilter/nft_set_rbtree.c index 0221510328d4f..84d317418d184 100644 --- a/net/netfilter/nft_set_rbtree.c +++ b/net/netfilter/nft_set_rbtree.c @@ -36,6 +36,11 @@ static bool nft_rbtree_interval_end(const struct nft_rbtree_elem *rbe) (*nft_set_ext_flags(&rbe->ext) & NFT_SET_ELEM_INTERVAL_END); }
+static bool nft_rbtree_interval_start(const struct nft_rbtree_elem *rbe) +{ + return !nft_rbtree_interval_end(rbe); +} + static bool nft_rbtree_equal(const struct nft_set *set, const void *this, const struct nft_rbtree_elem *interval) { @@ -67,7 +72,7 @@ static bool __nft_rbtree_lookup(const struct net *net, const struct nft_set *set if (interval && nft_rbtree_equal(set, this, interval) && nft_rbtree_interval_end(rbe) && - !nft_rbtree_interval_end(interval)) + nft_rbtree_interval_start(interval)) continue; interval = rbe; } else if (d > 0) @@ -92,7 +97,7 @@ static bool __nft_rbtree_lookup(const struct net *net, const struct nft_set *set
if (set->flags & NFT_SET_INTERVAL && interval != NULL && nft_set_elem_active(&interval->ext, genmask) && - !nft_rbtree_interval_end(interval)) { + nft_rbtree_interval_start(interval)) { *ext = &interval->ext; return true; } @@ -221,9 +226,9 @@ static int __nft_rbtree_insert(const struct net *net, const struct nft_set *set, p = &parent->rb_right; else { if (nft_rbtree_interval_end(rbe) && - !nft_rbtree_interval_end(new)) { + nft_rbtree_interval_start(new)) { p = &parent->rb_left; - } else if (!nft_rbtree_interval_end(rbe) && + } else if (nft_rbtree_interval_start(rbe) && nft_rbtree_interval_end(new)) { p = &parent->rb_right; } else if (nft_set_elem_active(&rbe->ext, genmask)) { @@ -314,10 +319,10 @@ static void *nft_rbtree_deactivate(const struct net *net, parent = parent->rb_right; else { if (nft_rbtree_interval_end(rbe) && - !nft_rbtree_interval_end(this)) { + nft_rbtree_interval_start(this)) { parent = parent->rb_left; continue; - } else if (!nft_rbtree_interval_end(rbe) && + } else if (nft_rbtree_interval_start(rbe) && nft_rbtree_interval_end(this)) { parent = parent->rb_right; continue;
From: Stefano Brivio sbrivio@redhat.com
[ Upstream commit 7c84d41416d836ef7e533bd4d64ccbdf40c5ac70 ]
...and return -ENOTEMPTY to the front-end in this case, instead of proceeding. Currently, nft takes care of checking for these cases and not sending them to the kernel, but if we drop the set_overlap() call in nft we can end up in situations like:
# nft add table t # nft add set t s '{ type inet_service ; flags interval ; }' # nft add element t s '{ 1 - 5 }' # nft add element t s '{ 6 - 10 }' # nft add element t s '{ 4 - 7 }' # nft list set t s table ip t { set s { type inet_service flags interval elements = { 1-3, 4-5, 6-7 } } }
This change has the primary purpose of making the behaviour consistent with nft_set_pipapo, but is also functional to avoid inconsistent behaviour if userspace sends overlapping elements for any reason.
v2: When we meet the same key data in the tree, as start element while inserting an end element, or as end element while inserting a start element, actually check that the existing element is active, before resetting the overlap flag (Pablo Neira Ayuso)
Signed-off-by: Stefano Brivio sbrivio@redhat.com Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/nft_set_rbtree.c | 70 ++++++++++++++++++++++++++++++++-- 1 file changed, 67 insertions(+), 3 deletions(-)
diff --git a/net/netfilter/nft_set_rbtree.c b/net/netfilter/nft_set_rbtree.c index 84d317418d184..1769e8c473e11 100644 --- a/net/netfilter/nft_set_rbtree.c +++ b/net/netfilter/nft_set_rbtree.c @@ -210,8 +210,43 @@ static int __nft_rbtree_insert(const struct net *net, const struct nft_set *set, u8 genmask = nft_genmask_next(net); struct nft_rbtree_elem *rbe; struct rb_node *parent, **p; + bool overlap = false; int d;
+ /* Detect overlaps as we descend the tree. Set the flag in these cases: + * + * a1. |__ _ _? >|__ _ _ (insert start after existing start) + * a2. _ _ __>| ?_ _ __| (insert end before existing end) + * a3. _ _ ___| ?_ _ _>| (insert end after existing end) + * a4. >|__ _ _ _ _ __| (insert start before existing end) + * + * and clear it later on, as we eventually reach the points indicated by + * '?' above, in the cases described below. We'll always meet these + * later, locally, due to tree ordering, and overlaps for the intervals + * that are the closest together are always evaluated last. + * + * b1. |__ _ _! >|__ _ _ (insert start after existing end) + * b2. _ _ __>| !_ _ __| (insert end before existing start) + * b3. !_____>| (insert end after existing start) + * + * Case a4. resolves to b1.: + * - if the inserted start element is the leftmost, because the '0' + * element in the tree serves as end element + * - otherwise, if an existing end is found. Note that end elements are + * always inserted after corresponding start elements. + * + * For a new, rightmost pair of elements, we'll hit cases b1. and b3., + * in that order. + * + * The flag is also cleared in two special cases: + * + * b4. |__ _ _!|<_ _ _ (insert start right before existing end) + * b5. |__ _ >|!__ _ _ (insert end right after existing start) + * + * which always happen as last step and imply that no further + * overlapping is possible. + */ + parent = NULL; p = &priv->root.rb_node; while (*p != NULL) { @@ -220,17 +255,42 @@ static int __nft_rbtree_insert(const struct net *net, const struct nft_set *set, d = memcmp(nft_set_ext_key(&rbe->ext), nft_set_ext_key(&new->ext), set->klen); - if (d < 0) + if (d < 0) { p = &parent->rb_left; - else if (d > 0) + + if (nft_rbtree_interval_start(new)) { + overlap = nft_rbtree_interval_start(rbe) && + nft_set_elem_active(&rbe->ext, + genmask); + } else { + overlap = nft_rbtree_interval_end(rbe) && + nft_set_elem_active(&rbe->ext, + genmask); + } + } else if (d > 0) { p = &parent->rb_right; - else { + + if (nft_rbtree_interval_end(new)) { + overlap = nft_rbtree_interval_end(rbe) && + nft_set_elem_active(&rbe->ext, + genmask); + } else if (nft_rbtree_interval_end(rbe) && + nft_set_elem_active(&rbe->ext, genmask)) { + overlap = true; + } + } else { if (nft_rbtree_interval_end(rbe) && nft_rbtree_interval_start(new)) { p = &parent->rb_left; + + if (nft_set_elem_active(&rbe->ext, genmask)) + overlap = false; } else if (nft_rbtree_interval_start(rbe) && nft_rbtree_interval_end(new)) { p = &parent->rb_right; + + if (nft_set_elem_active(&rbe->ext, genmask)) + overlap = false; } else if (nft_set_elem_active(&rbe->ext, genmask)) { *ext = &rbe->ext; return -EEXIST; @@ -239,6 +299,10 @@ static int __nft_rbtree_insert(const struct net *net, const struct nft_set *set, } } } + + if (overlap) + return -ENOTEMPTY; + rb_link_node_rcu(&new->node, parent, p); rb_insert_color(&new->node, &priv->root); return 0;
From: Raju Rangoju rajur@chelsio.com
[ Upstream commit 50e0d28d3808146cc19b0d5564ef4ba9e5bf3846 ]
cxgb4_ptp_fineadjtime() doesn't pass the signedness of offset delta in FW_PTP_CMD. Fix it by passing correct sign.
Signed-off-by: Raju Rangoju rajur@chelsio.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/chelsio/cxgb4/cxgb4_ptp.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ptp.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ptp.c index 9f9d6cae39d55..758f2b8363282 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ptp.c +++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_ptp.c @@ -246,6 +246,9 @@ static int cxgb4_ptp_fineadjtime(struct adapter *adapter, s64 delta) FW_PTP_CMD_PORTID_V(0)); c.retval_len16 = cpu_to_be32(FW_CMD_LEN16_V(sizeof(c) / 16)); c.u.ts.sc = FW_PTP_SC_ADJ_FTIME; + c.u.ts.sign = (delta < 0) ? 1 : 0; + if (delta < 0) + delta = -delta; c.u.ts.tm = cpu_to_be64(delta);
err = t4_wr_mbox(adapter, adapter->mbox, &c, sizeof(c), NULL);
From: Xu Wang vulab@iscas.ac.cn
[ Upstream commit bcaeb886ade124331a6f3a5cef34a3f1484c0a03 ]
In qlcnic_83xx_get_reset_instruction_template, the variable of null test is bad, so correct it.
Signed-off-by: Xu Wang vulab@iscas.ac.cn Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c index 07f9067affc65..cda5b0a9e9489 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c @@ -1720,7 +1720,7 @@ static int qlcnic_83xx_get_reset_instruction_template(struct qlcnic_adapter *p_d
ahw->reset.seq_error = 0; ahw->reset.buff = kzalloc(QLC_83XX_RESTART_TEMPLATE_SIZE, GFP_KERNEL); - if (p_dev->ahw->reset.buff == NULL) + if (ahw->reset.buff == NULL) return -ENOMEM;
p_buff = p_dev->ahw->reset.buff;
From: Alain Volmat avolmat@me.com
[ Upstream commit f491c6687332920e296d0209e366fe2ca7eab1c6 ]
Fix a missing struct parameter description to allow warning free W=1 compilation.
Signed-off-by: Alain Volmat avolmat@me.com Reviewed-by: Patrice Chotard patrice.chotard@st.com Signed-off-by: Wolfram Sang wsa@the-dreams.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/i2c/busses/i2c-st.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/i2c/busses/i2c-st.c b/drivers/i2c/busses/i2c-st.c index 9e62f893958aa..81158ae8bfe36 100644 --- a/drivers/i2c/busses/i2c-st.c +++ b/drivers/i2c/busses/i2c-st.c @@ -437,6 +437,7 @@ static void st_i2c_wr_fill_tx_fifo(struct st_i2c_dev *i2c_dev) /** * st_i2c_rd_fill_tx_fifo() - Fill the Tx FIFO in read mode * @i2c_dev: Controller's private data + * @max: Maximum amount of data to fill into the Tx FIFO * * This functions fills the Tx FIFO with fixed pattern when * in read mode to trigger clock.
linux-stable-mirror@lists.linaro.org
-
Sasha Levin