[PATCH AUTOSEL 5.15 01/46] HID: multitouch: new device class fix Lenovo X12 trackpad sticky
From: Tao Jin tao-j@outlook.com
[ Upstream commit 54eed5c7b938dc4ef6b14d4ee048bbdafdbce352 ]
The trackpad of the given device sends continuous report of pointers status as per wxn8 spec. However, the spec did not clarify when the fingers are lifted so fast that between the interval of two report frames fingers on pad reduced from >=2 to 0. The second last report contains >=2 fingers with tip state 1 and the last report contains only 1 finger with tip state 0. Although this can happen unfrequently, a quick fix will be improve the consistency to 100%. A quick fix is to disable MT_QUIRK_ALWAYS_VALID and enable MT_QUIRK_NOT_SEEN_MEANS_UP.
Test for hid-tools is added in [1]
In addition to this, I2C device 04CA:00B1 may also need similar class but with MT_QUIRK_FORCE_MULTI_INPUT disabled (but it does not harm to enable it on non-multi-input device either). The respective owner has been notified and a patch may coming soon after test.
[1]: https://gitlab.freedesktop.org/libevdev/hid-tools/-/merge_requests/130
Signed-off-by: Tao Jin tao-j@outlook.com Signed-off-by: Jiri Kosina jkosina@suse.cz Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hid/hid-multitouch.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-)
diff --git a/drivers/hid/hid-multitouch.c b/drivers/hid/hid-multitouch.c index f382444dc2db..a14c48de4446 100644 --- a/drivers/hid/hid-multitouch.c +++ b/drivers/hid/hid-multitouch.c @@ -194,6 +194,7 @@ static void mt_post_parse(struct mt_device *td, struct mt_application *app); #define MT_CLS_WIN_8_FORCE_MULTI_INPUT 0x0015 #define MT_CLS_WIN_8_DISABLE_WAKEUP 0x0016 #define MT_CLS_WIN_8_NO_STICKY_FINGERS 0x0017 +#define MT_CLS_WIN_8_FORCE_MULTI_INPUT_NSMU 0x0018
/* vendor specific classes */ #define MT_CLS_3M 0x0101 @@ -286,6 +287,15 @@ static const struct mt_class mt_classes[] = { MT_QUIRK_WIN8_PTP_BUTTONS | MT_QUIRK_FORCE_MULTI_INPUT, .export_all_inputs = true }, + { .name = MT_CLS_WIN_8_FORCE_MULTI_INPUT_NSMU, + .quirks = MT_QUIRK_IGNORE_DUPLICATES | + MT_QUIRK_HOVERING | + MT_QUIRK_CONTACT_CNT_ACCURATE | + MT_QUIRK_STICKY_FINGERS | + MT_QUIRK_WIN8_PTP_BUTTONS | + MT_QUIRK_FORCE_MULTI_INPUT | + MT_QUIRK_NOT_SEEN_MEANS_UP, + .export_all_inputs = true }, { .name = MT_CLS_WIN_8_DISABLE_WAKEUP, .quirks = MT_QUIRK_ALWAYS_VALID | MT_QUIRK_IGNORE_DUPLICATES | @@ -783,6 +793,7 @@ static int mt_touch_input_mapping(struct hid_device *hdev, struct hid_input *hi, case HID_DG_CONFIDENCE: if ((cls->name == MT_CLS_WIN_8 || cls->name == MT_CLS_WIN_8_FORCE_MULTI_INPUT || + cls->name == MT_CLS_WIN_8_FORCE_MULTI_INPUT_NSMU || cls->name == MT_CLS_WIN_8_DISABLE_WAKEUP) && (field->application == HID_DG_TOUCHPAD || field->application == HID_DG_TOUCHSCREEN)) @@ -2033,7 +2044,7 @@ static const struct hid_device_id mt_devices[] = { USB_DEVICE_ID_LENOVO_X1_TAB3) },
/* Lenovo X12 TAB Gen 1 */ - { .driver_data = MT_CLS_WIN_8_FORCE_MULTI_INPUT, + { .driver_data = MT_CLS_WIN_8_FORCE_MULTI_INPUT_NSMU, HID_DEVICE(BUS_USB, HID_GROUP_MULTITOUCH_WIN_8, USB_VENDOR_ID_LENOVO, USB_DEVICE_ID_LENOVO_X12_TAB) },
From: Pavan Chebbi pavan.chebbi@broadcom.com
[ Upstream commit afd306a65cedb9589564bdb23a0c368abc4215fd ]
The Broadcom BCM5750x NICs may be multi-function devices. They do not advertise ACS capability. Peer-to-peer transactions are not possible between the individual functions, so it is safe to treat them as fully isolated.
Add an ACS quirk for these devices so the functions can be in independent IOMMU groups and attached individually to userspace applications using VFIO.
Link: https://lore.kernel.org/r/1654796507-28610-1-git-send-email-michael.chan@bro... Signed-off-by: Pavan Chebbi pavan.chebbi@broadcom.com Signed-off-by: Michael Chan michael.chan@broadcom.com Signed-off-by: Bjorn Helgaas bhelgaas@google.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/quirks.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 4893b1e82403..a531064233f9 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -4923,6 +4923,9 @@ static const struct pci_dev_acs_enabled { { PCI_VENDOR_ID_AMPERE, 0xE00C, pci_quirk_xgene_acs }, /* Broadcom multi-function device */ { PCI_VENDOR_ID_BROADCOM, 0x16D7, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_BROADCOM, 0x1750, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_BROADCOM, 0x1751, pci_quirk_mf_endpoint_acs }, + { PCI_VENDOR_ID_BROADCOM, 0x1752, pci_quirk_mf_endpoint_acs }, { PCI_VENDOR_ID_BROADCOM, 0xD714, pci_quirk_brcm_acs }, /* Amazon Annapurna Labs */ { PCI_VENDOR_ID_AMAZON_ANNAPURNA_LABS, 0x0031, pci_quirk_al_acs },
From: Tzung-Bi Shih tzungbi@kernel.org
[ Upstream commit b36f0643ff14a2fb281b105418e4e73c9d7c11d0 ]
It wrongly showed the following message when it doesn't support MKBP: "MKBP support version 4294967295".
Fix it.
Reviewed-by: Guenter Roeck groeck@chromium.org Signed-off-by: Tzung-Bi Shih tzungbi@kernel.org Link: https://lore.kernel.org/r/20220609084957.3684698-14-tzungbi@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/platform/chrome/cros_ec_proto.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/platform/chrome/cros_ec_proto.c b/drivers/platform/chrome/cros_ec_proto.c index ed2b4807328d..1575d603d3ff 100644 --- a/drivers/platform/chrome/cros_ec_proto.c +++ b/drivers/platform/chrome/cros_ec_proto.c @@ -507,13 +507,13 @@ int cros_ec_query_all(struct cros_ec_device *ec_dev) ret = cros_ec_get_host_command_version_mask(ec_dev, EC_CMD_GET_NEXT_EVENT, &ver_mask); - if (ret < 0 || ver_mask == 0) + if (ret < 0 || ver_mask == 0) { ec_dev->mkbp_event_supported = 0; - else + } else { ec_dev->mkbp_event_supported = fls(ver_mask);
- dev_dbg(ec_dev->dev, "MKBP support version %u\n", - ec_dev->mkbp_event_supported - 1); + dev_dbg(ec_dev->dev, "MKBP support version %u\n", ec_dev->mkbp_event_supported - 1); + }
/* Probe if host sleep v1 is supported for S0ix failure detection. */ ret = cros_ec_get_host_command_version_mask(ec_dev,
From: Frank Li Frank.Li@nxp.com
[ Upstream commit 7d602f30149a117eea260208b1661bc404c21dfd ]
BUG: KFENCE: use-after-free read in __list_del_entry_valid+0x10/0xac
cdns3_wa2_remove_old_request() { ... kfree(priv_req->request.buf); cdns3_gadget_ep_free_request(&priv_ep->endpoint, &priv_req->request); list_del_init(&priv_req->list); ^^^ use after free ... }
cdns3_gadget_ep_free_request() free the space pointed by priv_req, but priv_req is used in the following list_del_init().
This patch move list_del_init() before cdns3_gadget_ep_free_request().
Signed-off-by: Frank Li Frank.Li@nxp.com Signed-off-by: Faqiang Zhu faqiang.zhu@nxp.com Link: https://lore.kernel.org/r/20220608190430.2814358-1-Frank.Li@nxp.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/cdns3/cdns3-gadget.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/cdns3/cdns3-gadget.c b/drivers/usb/cdns3/cdns3-gadget.c index d6d515d598dc..c4f90b124e55 100644 --- a/drivers/usb/cdns3/cdns3-gadget.c +++ b/drivers/usb/cdns3/cdns3-gadget.c @@ -625,9 +625,9 @@ static void cdns3_wa2_remove_old_request(struct cdns3_endpoint *priv_ep) trace_cdns3_wa2(priv_ep, "removes eldest request");
kfree(priv_req->request.buf); + list_del_init(&priv_req->list); cdns3_gadget_ep_free_request(&priv_ep->endpoint, &priv_req->request); - list_del_init(&priv_req->list); --priv_ep->wa2_counter;
if (!chain)
From: Frank Li Frank.Li@nxp.com
[ Upstream commit 8659ab3d936fcf0084676f98b75b317017aa8f82 ]
Warning log: [ 4.141392] Unexpected gfp: 0x4 (GFP_DMA32). Fixing up to gfp: 0xa20 (GFP_ATOMIC). Fix your code! [ 4.150340] CPU: 1 PID: 175 Comm: 1-0050 Not tainted 5.15.5-00039-g2fd9ae1b568c #20 [ 4.158010] Hardware name: Freescale i.MX8QXP MEK (DT) [ 4.163155] Call trace: [ 4.165600] dump_backtrace+0x0/0x1b0 [ 4.169286] show_stack+0x18/0x68 [ 4.172611] dump_stack_lvl+0x68/0x84 [ 4.176286] dump_stack+0x18/0x34 [ 4.179613] kmalloc_fix_flags+0x60/0x88 [ 4.183550] new_slab+0x334/0x370 [ 4.186878] ___slab_alloc.part.108+0x4d4/0x748 [ 4.191419] __slab_alloc.isra.109+0x30/0x78 [ 4.195702] kmem_cache_alloc+0x40c/0x420 [ 4.199725] dma_pool_alloc+0xac/0x1f8 [ 4.203486] cdns3_allocate_trb_pool+0xb4/0xd0
pool_alloc_page(struct dma_pool *pool, gfp_t mem_flags) { ... page = kmalloc(sizeof(*page), mem_flags); page->vaddr = dma_alloc_coherent(pool->dev, pool->allocation, &page->dma, mem_flags); ... }
kmalloc was called with mem_flags, which is passed down in cdns3_allocate_trb_pool() and have GFP_DMA32 flags. kmall_fix_flags() report warning.
GFP_DMA32 is not useful at all. dma_alloc_coherent() will handle DMA memory region correctly by pool->dev. GFP_DMA32 can be removed safely.
Signed-off-by: Frank Li Frank.Li@nxp.com Link: https://lore.kernel.org/r/20220609154456.2871672-1-Frank.Li@nxp.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/cdns3/cdns3-gadget.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/cdns3/cdns3-gadget.c b/drivers/usb/cdns3/cdns3-gadget.c index c4f90b124e55..c7c394402e44 100644 --- a/drivers/usb/cdns3/cdns3-gadget.c +++ b/drivers/usb/cdns3/cdns3-gadget.c @@ -220,7 +220,7 @@ int cdns3_allocate_trb_pool(struct cdns3_endpoint *priv_ep)
if (!priv_ep->trb_pool) { priv_ep->trb_pool = dma_pool_alloc(priv_dev->eps_dma_pool, - GFP_DMA32 | GFP_ATOMIC, + GFP_ATOMIC, &priv_ep->trb_pool_dma);
if (!priv_ep->trb_pool)
From: Michael Grzeschik m.grzeschik@pengutronix.de
[ Upstream commit 87d76b5f1d8eeb49efa16e2018e188864cbb9401 ]
The current limitation of possible number of requests being handled is dependent on the gadget speed. It makes more sense to depend on the typical frame size when calculating the number of requests. This patch is changing this and is using the previous limits as boundaries for reasonable minimum and maximum number of requests.
For a 1080p jpeg encoded video stream with a maximum imagesize of e.g. 800kB with a maxburst of 8 and an multiplier of 1 the resulting number of requests is calculated to 49.
800768 1 nreqs = ------ * -------------- ~= 49 2 (1024 * 8 * 1)
Tested-by: Dan Vacura w36195@motorola.com Signed-off-by: Michael Grzeschik m.grzeschik@pengutronix.de Link: https://lore.kernel.org/r/20220529223848.105914-2-m.grzeschik@pengutronix.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/gadget/function/uvc_queue.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/gadget/function/uvc_queue.c b/drivers/usb/gadget/function/uvc_queue.c index 99dc9adf56ef..a64b842665b9 100644 --- a/drivers/usb/gadget/function/uvc_queue.c +++ b/drivers/usb/gadget/function/uvc_queue.c @@ -44,7 +44,8 @@ static int uvc_queue_setup(struct vb2_queue *vq, { struct uvc_video_queue *queue = vb2_get_drv_priv(vq); struct uvc_video *video = container_of(queue, struct uvc_video, queue); - struct usb_composite_dev *cdev = video->uvc->func.config->cdev; + unsigned int req_size; + unsigned int nreq;
if (*nbuffers > UVC_MAX_VIDEO_BUFFERS) *nbuffers = UVC_MAX_VIDEO_BUFFERS; @@ -53,10 +54,16 @@ static int uvc_queue_setup(struct vb2_queue *vq,
sizes[0] = video->imagesize;
- if (cdev->gadget->speed < USB_SPEED_SUPER) - video->uvc_num_requests = 4; - else - video->uvc_num_requests = 64; + req_size = video->ep->maxpacket + * max_t(unsigned int, video->ep->maxburst, 1) + * (video->ep->mult); + + /* We divide by two, to increase the chance to run + * into fewer requests for smaller framesizes. + */ + nreq = DIV_ROUND_UP(DIV_ROUND_UP(sizes[0], 2), req_size); + nreq = clamp(nreq, 4U, 64U); + video->uvc_num_requests = nreq;
return 0; }
From: Michael Grzeschik m.grzeschik@pengutronix.de
[ Upstream commit a725d0f6dfc5d3739d6499f30ec865305ba3544d ]
Likewise to the uvcvideo hostside driver, this patch is changing the usb_request message of an non zero completion handler call from dev_info to dev_warn.
Reviewed-by: Laurent Pinchart laurent.pinchart@ideasonboard.com Signed-off-by: Michael Grzeschik m.grzeschik@pengutronix.de Link: https://lore.kernel.org/r/20220529223848.105914-4-m.grzeschik@pengutronix.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/gadget/function/uvc_video.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/gadget/function/uvc_video.c b/drivers/usb/gadget/function/uvc_video.c index b4a763e5f70e..e170e88abf3a 100644 --- a/drivers/usb/gadget/function/uvc_video.c +++ b/drivers/usb/gadget/function/uvc_video.c @@ -225,7 +225,7 @@ uvc_video_complete(struct usb_ep *ep, struct usb_request *req) break;
default: - uvcg_info(&video->uvc->func, + uvcg_warn(&video->uvc->func, "VS request completed with status %d.\n", req->status); uvcg_queue_cancel(queue, 0);
From: Pali Rohár pali@kernel.org
[ Upstream commit bcdb6fd4f3e9ac1097698c8d8f56b70853b49873 ]
Slot capabilities are currently not reported because emulated bridge does not report the PCI_EXP_FLAGS_SLOT flag.
Set PCI_EXP_FLAGS_SLOT to let the kernel know that PCI_EXP_SLT* registers are supported.
Move setting of PCI_EXP_SLTCTL register from "dynamic" pcie_conf_read function to static buffer as it is only statically filled the PCI_EXP_SLTSTA_PDS flag and dynamic read callback is not needed for this register.
Set Presence State Bit to 1 since there is no support for unplugging the card and there is currently no platform able to detect presence of a card - in such a case the bit needs to be set to 1.
Finally correctly set Physical Slot Number to 1 since there is only one port and zero value is reserved for ports within the same silicon as Root Port which is not our case for Aardvark HW.
Link: https://lore.kernel.org/r/20220524132827.8837-3-kabel@kernel.org Signed-off-by: Pali Rohár pali@kernel.org Signed-off-by: Marek Behún kabel@kernel.org Signed-off-by: Bjorn Helgaas bhelgaas@google.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/controller/pci-aardvark.c | 33 +++++++++++++++++++-------- 1 file changed, 24 insertions(+), 9 deletions(-)
diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c index 7cc2c54daad0..215f7510de9a 100644 --- a/drivers/pci/controller/pci-aardvark.c +++ b/drivers/pci/controller/pci-aardvark.c @@ -8,6 +8,7 @@ * Author: Hezi Shahmoon hezi.shahmoon@marvell.com */
+#include <linux/bitfield.h> #include <linux/delay.h> #include <linux/gpio/consumer.h> #include <linux/interrupt.h> @@ -857,14 +858,11 @@ advk_pci_bridge_emul_pcie_conf_read(struct pci_bridge_emul *bridge,
switch (reg) { - case PCI_EXP_SLTCTL: - *value = PCI_EXP_SLTSTA_PDS << 16; - return PCI_BRIDGE_EMUL_HANDLED; - /* - * PCI_EXP_RTCTL and PCI_EXP_RTSTA are also supported, but do not need - * to be handled here, because their values are stored in emulated - * config space buffer, and we read them from there when needed. + * PCI_EXP_SLTCAP, PCI_EXP_SLTCTL, PCI_EXP_RTCTL and PCI_EXP_RTSTA are + * also supported, but do not need to be handled here, because their + * values are stored in emulated config space buffer, and we read them + * from there when needed. */
case PCI_EXP_LNKCAP: { @@ -977,8 +975,25 @@ static int advk_sw_pci_bridge_init(struct advk_pcie *pcie) /* Support interrupt A for MSI feature */ bridge->conf.intpin = PCI_INTERRUPT_INTA;
- /* Aardvark HW provides PCIe Capability structure in version 2 */ - bridge->pcie_conf.cap = cpu_to_le16(2); + /* + * Aardvark HW provides PCIe Capability structure in version 2 and + * indicate slot support, which is emulated. + */ + bridge->pcie_conf.cap = cpu_to_le16(2 | PCI_EXP_FLAGS_SLOT); + + /* + * Set Presence Detect State bit permanently since there is no support + * for unplugging the card nor detecting whether it is plugged. (If a + * platform exists in the future that supports it, via a GPIO for + * example, it should be implemented via this bit.) + * + * Set physical slot number to 1 since there is only one port and zero + * value is reserved for ports within the same silicon as Root Port + * which is not our case. + */ + bridge->pcie_conf.slotcap = cpu_to_le32(FIELD_PREP(PCI_EXP_SLTCAP_PSN, + 1)); + bridge->pcie_conf.slotsta = cpu_to_le16(PCI_EXP_SLTSTA_PDS);
/* Indicates supports for Completion Retry Status */ bridge->pcie_conf.rootcap = cpu_to_le16(PCI_EXP_RTCAP_CRSVIS);
From: Sai Prakash Ranjan quic_saipraka@quicinc.com
[ Upstream commit 443685992bda9bb4f8b17fc02c9f6c60e62b1461 ]
Fix -Woverflow warnings for tegra irqchip driver which is a result of moving arm64 custom MMIO accessor macros to asm-generic function implementations giving a bonus type-checking now and uncovering these overflow warnings.
drivers/irqchip/irq-tegra.c: In function ‘tegra_ictlr_suspend’: drivers/irqchip/irq-tegra.c:151:18: warning: large integer implicitly truncated to unsigned type [-Woverflow] writel_relaxed(~0ul, ictlr + ICTLR_COP_IER_CLR); ^
Suggested-by: Marc Zyngier maz@kernel.org Signed-off-by: Sai Prakash Ranjan quic_saipraka@quicinc.com Reviewed-by: Arnd Bergmann arnd@arndb.de Cc: Marc Zyngier maz@kernel.org Signed-off-by: Arnd Bergmann arnd@arndb.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/irqchip/irq-tegra.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/irqchip/irq-tegra.c b/drivers/irqchip/irq-tegra.c index e1f771c72fc4..ad3e2c1b3c87 100644 --- a/drivers/irqchip/irq-tegra.c +++ b/drivers/irqchip/irq-tegra.c @@ -148,10 +148,10 @@ static int tegra_ictlr_suspend(void) lic->cop_iep[i] = readl_relaxed(ictlr + ICTLR_COP_IEP_CLASS);
/* Disable COP interrupts */ - writel_relaxed(~0ul, ictlr + ICTLR_COP_IER_CLR); + writel_relaxed(GENMASK(31, 0), ictlr + ICTLR_COP_IER_CLR);
/* Disable CPU interrupts */ - writel_relaxed(~0ul, ictlr + ICTLR_CPU_IER_CLR); + writel_relaxed(GENMASK(31, 0), ictlr + ICTLR_CPU_IER_CLR);
/* Enable the wakeup sources of ictlr */ writel_relaxed(lic->ictlr_wake_mask[i], ictlr + ICTLR_CPU_IER_SET); @@ -172,12 +172,12 @@ static void tegra_ictlr_resume(void)
writel_relaxed(lic->cpu_iep[i], ictlr + ICTLR_CPU_IEP_CLASS); - writel_relaxed(~0ul, ictlr + ICTLR_CPU_IER_CLR); + writel_relaxed(GENMASK(31, 0), ictlr + ICTLR_CPU_IER_CLR); writel_relaxed(lic->cpu_ier[i], ictlr + ICTLR_CPU_IER_SET); writel_relaxed(lic->cop_iep[i], ictlr + ICTLR_COP_IEP_CLASS); - writel_relaxed(~0ul, ictlr + ICTLR_COP_IER_CLR); + writel_relaxed(GENMASK(31, 0), ictlr + ICTLR_COP_IER_CLR); writel_relaxed(lic->cop_ier[i], ictlr + ICTLR_COP_IER_SET); } @@ -312,7 +312,7 @@ static int __init tegra_ictlr_init(struct device_node *node, lic->base[i] = base;
/* Disable all interrupts */ - writel_relaxed(~0UL, base + ICTLR_CPU_IER_CLR); + writel_relaxed(GENMASK(31, 0), base + ICTLR_CPU_IER_CLR); /* All interrupts target IRQ */ writel_relaxed(0, base + ICTLR_CPU_IEP_CLASS);
From: Sai Prakash Ranjan quic_saipraka@quicinc.com
[ Upstream commit 98692f52c588225034cbff458622c2c06dfcb544 ]
Fix -Woverflow warnings for drm/meson driver which is a result of moving arm64 custom MMIO accessor macros to asm-generic function implementations giving a bonus type-checking now and uncovering these overflow warnings.
drivers/gpu/drm/meson/meson_viu.c: In function ‘meson_viu_init’: drivers/gpu/drm/meson/meson_registers.h:1826:48: error: large integer implicitly truncated to unsigned type [-Werror=overflow] #define VIU_OSD_BLEND_REORDER(dest, src) ((src) << (dest * 4)) ^ drivers/gpu/drm/meson/meson_viu.c:472:18: note: in expansion of macro ‘VIU_OSD_BLEND_REORDER’ writel_relaxed(VIU_OSD_BLEND_REORDER(0, 1) | ^~~~~~~~~~~~~~~~~~~~~
Reported-by: kernel test robot lkp@intel.com Signed-off-by: Sai Prakash Ranjan quic_saipraka@quicinc.com Reviewed-by: Arnd Bergmann arnd@arndb.de Cc: Arnd Bergmann arnd@arndb.de Cc: Neil Armstrong narmstrong@baylibre.com Signed-off-by: Arnd Bergmann arnd@arndb.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/meson/meson_viu.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/drivers/gpu/drm/meson/meson_viu.c b/drivers/gpu/drm/meson/meson_viu.c index 259f3e6bec90..bb7e109534de 100644 --- a/drivers/gpu/drm/meson/meson_viu.c +++ b/drivers/gpu/drm/meson/meson_viu.c @@ -469,17 +469,17 @@ void meson_viu_init(struct meson_drm *priv) priv->io_base + _REG(VD2_IF0_LUMA_FIFO_SIZE));
if (meson_vpu_is_compatible(priv, VPU_COMPATIBLE_G12A)) { - writel_relaxed(VIU_OSD_BLEND_REORDER(0, 1) | - VIU_OSD_BLEND_REORDER(1, 0) | - VIU_OSD_BLEND_REORDER(2, 0) | - VIU_OSD_BLEND_REORDER(3, 0) | - VIU_OSD_BLEND_DIN_EN(1) | - VIU_OSD_BLEND1_DIN3_BYPASS_TO_DOUT1 | - VIU_OSD_BLEND1_DOUT_BYPASS_TO_BLEND2 | - VIU_OSD_BLEND_DIN0_BYPASS_TO_DOUT0 | - VIU_OSD_BLEND_BLEN2_PREMULT_EN(1) | - VIU_OSD_BLEND_HOLD_LINES(4), - priv->io_base + _REG(VIU_OSD_BLEND_CTRL)); + u32 val = (u32)VIU_OSD_BLEND_REORDER(0, 1) | + (u32)VIU_OSD_BLEND_REORDER(1, 0) | + (u32)VIU_OSD_BLEND_REORDER(2, 0) | + (u32)VIU_OSD_BLEND_REORDER(3, 0) | + (u32)VIU_OSD_BLEND_DIN_EN(1) | + (u32)VIU_OSD_BLEND1_DIN3_BYPASS_TO_DOUT1 | + (u32)VIU_OSD_BLEND1_DOUT_BYPASS_TO_BLEND2 | + (u32)VIU_OSD_BLEND_DIN0_BYPASS_TO_DOUT0 | + (u32)VIU_OSD_BLEND_BLEN2_PREMULT_EN(1) | + (u32)VIU_OSD_BLEND_HOLD_LINES(4); + writel_relaxed(val, priv->io_base + _REG(VIU_OSD_BLEND_CTRL));
writel_relaxed(OSD_BLEND_PATH_SEL_ENABLE, priv->io_base + _REG(OSD1_BLEND_SRC_CTRL));
From: Tony Lindgren tony@atomide.com
[ Upstream commit 255584b138343d4a28c6d25bd82d04b09460d672 ]
With the addition of clock-output-names, we can now unify the internal clock naming for omap4 and 5 to follow the other TI SoCs.
We are still using legacy clkctrl names for omap4 and 5 based on the clock manager name which is wrong. Instead, we want to use the clkctrl clock based naming.
We must now also drop the legacy TI_CLK_CLKCTRL_COMPAT quirk for the clkctrl clock.
This change will allow further devicetree warning cleanup as already done for am3/4 and dra7.
Cc: linux-clk@vger.kernel.org Cc: Stephen Boyd sboyd@kernel.org Cc: Tero Kristo kristo@kernel.org Signed-off-by: Tony Lindgren tony@atomide.com Link: https://lore.kernel.org/r/20220615064306.22254-1-tony@atomide.com Signed-off-by: Stephen Boyd sboyd@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/clk/ti/clk-44xx.c | 210 +++++++++++++++++++------------------- drivers/clk/ti/clk-54xx.c | 160 ++++++++++++++--------------- drivers/clk/ti/clkctrl.c | 4 - 3 files changed, 185 insertions(+), 189 deletions(-)
diff --git a/drivers/clk/ti/clk-44xx.c b/drivers/clk/ti/clk-44xx.c index d078e5d73ed9..868bc7af21b0 100644 --- a/drivers/clk/ti/clk-44xx.c +++ b/drivers/clk/ti/clk-44xx.c @@ -56,7 +56,7 @@ static const struct omap_clkctrl_bit_data omap4_aess_bit_data[] __initconst = { };
static const char * const omap4_func_dmic_abe_gfclk_parents[] __initconst = { - "abe_cm:clk:0018:26", + "abe-clkctrl:0018:26", "pad_clks_ck", "slimbus_clk", NULL, @@ -76,7 +76,7 @@ static const struct omap_clkctrl_bit_data omap4_dmic_bit_data[] __initconst = { };
static const char * const omap4_func_mcasp_abe_gfclk_parents[] __initconst = { - "abe_cm:clk:0020:26", + "abe-clkctrl:0020:26", "pad_clks_ck", "slimbus_clk", NULL, @@ -89,7 +89,7 @@ static const struct omap_clkctrl_bit_data omap4_mcasp_bit_data[] __initconst = { };
static const char * const omap4_func_mcbsp1_gfclk_parents[] __initconst = { - "abe_cm:clk:0028:26", + "abe-clkctrl:0028:26", "pad_clks_ck", "slimbus_clk", NULL, @@ -102,7 +102,7 @@ static const struct omap_clkctrl_bit_data omap4_mcbsp1_bit_data[] __initconst = };
static const char * const omap4_func_mcbsp2_gfclk_parents[] __initconst = { - "abe_cm:clk:0030:26", + "abe-clkctrl:0030:26", "pad_clks_ck", "slimbus_clk", NULL, @@ -115,7 +115,7 @@ static const struct omap_clkctrl_bit_data omap4_mcbsp2_bit_data[] __initconst = };
static const char * const omap4_func_mcbsp3_gfclk_parents[] __initconst = { - "abe_cm:clk:0038:26", + "abe-clkctrl:0038:26", "pad_clks_ck", "slimbus_clk", NULL, @@ -183,18 +183,18 @@ static const struct omap_clkctrl_bit_data omap4_timer8_bit_data[] __initconst =
static const struct omap_clkctrl_reg_data omap4_abe_clkctrl_regs[] __initconst = { { OMAP4_L4_ABE_CLKCTRL, NULL, 0, "ocp_abe_iclk" }, - { OMAP4_AESS_CLKCTRL, omap4_aess_bit_data, CLKF_SW_SUP, "abe_cm:clk:0008:24" }, + { OMAP4_AESS_CLKCTRL, omap4_aess_bit_data, CLKF_SW_SUP, "abe-clkctrl:0008:24" }, { OMAP4_MCPDM_CLKCTRL, NULL, CLKF_SW_SUP, "pad_clks_ck" }, - { OMAP4_DMIC_CLKCTRL, omap4_dmic_bit_data, CLKF_SW_SUP, "abe_cm:clk:0018:24" }, - { OMAP4_MCASP_CLKCTRL, omap4_mcasp_bit_data, CLKF_SW_SUP, "abe_cm:clk:0020:24" }, - { OMAP4_MCBSP1_CLKCTRL, omap4_mcbsp1_bit_data, CLKF_SW_SUP, "abe_cm:clk:0028:24" }, - { OMAP4_MCBSP2_CLKCTRL, omap4_mcbsp2_bit_data, CLKF_SW_SUP, "abe_cm:clk:0030:24" }, - { OMAP4_MCBSP3_CLKCTRL, omap4_mcbsp3_bit_data, CLKF_SW_SUP, "abe_cm:clk:0038:24" }, - { OMAP4_SLIMBUS1_CLKCTRL, omap4_slimbus1_bit_data, CLKF_SW_SUP, "abe_cm:clk:0040:8" }, - { OMAP4_TIMER5_CLKCTRL, omap4_timer5_bit_data, CLKF_SW_SUP, "abe_cm:clk:0048:24" }, - { OMAP4_TIMER6_CLKCTRL, omap4_timer6_bit_data, CLKF_SW_SUP, "abe_cm:clk:0050:24" }, - { OMAP4_TIMER7_CLKCTRL, omap4_timer7_bit_data, CLKF_SW_SUP, "abe_cm:clk:0058:24" }, - { OMAP4_TIMER8_CLKCTRL, omap4_timer8_bit_data, CLKF_SW_SUP, "abe_cm:clk:0060:24" }, + { OMAP4_DMIC_CLKCTRL, omap4_dmic_bit_data, CLKF_SW_SUP, "abe-clkctrl:0018:24" }, + { OMAP4_MCASP_CLKCTRL, omap4_mcasp_bit_data, CLKF_SW_SUP, "abe-clkctrl:0020:24" }, + { OMAP4_MCBSP1_CLKCTRL, omap4_mcbsp1_bit_data, CLKF_SW_SUP, "abe-clkctrl:0028:24" }, + { OMAP4_MCBSP2_CLKCTRL, omap4_mcbsp2_bit_data, CLKF_SW_SUP, "abe-clkctrl:0030:24" }, + { OMAP4_MCBSP3_CLKCTRL, omap4_mcbsp3_bit_data, CLKF_SW_SUP, "abe-clkctrl:0038:24" }, + { OMAP4_SLIMBUS1_CLKCTRL, omap4_slimbus1_bit_data, CLKF_SW_SUP, "abe-clkctrl:0040:8" }, + { OMAP4_TIMER5_CLKCTRL, omap4_timer5_bit_data, CLKF_SW_SUP, "abe-clkctrl:0048:24" }, + { OMAP4_TIMER6_CLKCTRL, omap4_timer6_bit_data, CLKF_SW_SUP, "abe-clkctrl:0050:24" }, + { OMAP4_TIMER7_CLKCTRL, omap4_timer7_bit_data, CLKF_SW_SUP, "abe-clkctrl:0058:24" }, + { OMAP4_TIMER8_CLKCTRL, omap4_timer8_bit_data, CLKF_SW_SUP, "abe-clkctrl:0060:24" }, { OMAP4_WD_TIMER3_CLKCTRL, NULL, CLKF_SW_SUP, "sys_32k_ck" }, { 0 }, }; @@ -287,7 +287,7 @@ static const struct omap_clkctrl_bit_data omap4_fdif_bit_data[] __initconst = {
static const struct omap_clkctrl_reg_data omap4_iss_clkctrl_regs[] __initconst = { { OMAP4_ISS_CLKCTRL, omap4_iss_bit_data, CLKF_SW_SUP, "ducati_clk_mux_ck" }, - { OMAP4_FDIF_CLKCTRL, omap4_fdif_bit_data, CLKF_SW_SUP, "iss_cm:clk:0008:24" }, + { OMAP4_FDIF_CLKCTRL, omap4_fdif_bit_data, CLKF_SW_SUP, "iss-clkctrl:0008:24" }, { 0 }, };
@@ -320,7 +320,7 @@ static const struct omap_clkctrl_bit_data omap4_dss_core_bit_data[] __initconst };
static const struct omap_clkctrl_reg_data omap4_l3_dss_clkctrl_regs[] __initconst = { - { OMAP4_DSS_CORE_CLKCTRL, omap4_dss_core_bit_data, CLKF_SW_SUP, "l3_dss_cm:clk:0000:8" }, + { OMAP4_DSS_CORE_CLKCTRL, omap4_dss_core_bit_data, CLKF_SW_SUP, "l3-dss-clkctrl:0000:8" }, { 0 }, };
@@ -336,7 +336,7 @@ static const struct omap_clkctrl_bit_data omap4_gpu_bit_data[] __initconst = { };
static const struct omap_clkctrl_reg_data omap4_l3_gfx_clkctrl_regs[] __initconst = { - { OMAP4_GPU_CLKCTRL, omap4_gpu_bit_data, CLKF_SW_SUP, "l3_gfx_cm:clk:0000:24" }, + { OMAP4_GPU_CLKCTRL, omap4_gpu_bit_data, CLKF_SW_SUP, "l3-gfx-clkctrl:0000:24" }, { 0 }, };
@@ -372,12 +372,12 @@ static const struct omap_clkctrl_bit_data omap4_hsi_bit_data[] __initconst = { };
static const char * const omap4_usb_host_hs_utmi_p1_clk_parents[] __initconst = { - "l3_init_cm:clk:0038:24", + "l3-init-clkctrl:0038:24", NULL, };
static const char * const omap4_usb_host_hs_utmi_p2_clk_parents[] __initconst = { - "l3_init_cm:clk:0038:25", + "l3-init-clkctrl:0038:25", NULL, };
@@ -418,7 +418,7 @@ static const struct omap_clkctrl_bit_data omap4_usb_host_hs_bit_data[] __initcon };
static const char * const omap4_usb_otg_hs_xclk_parents[] __initconst = { - "l3_init_cm:clk:0040:24", + "l3-init-clkctrl:0040:24", NULL, };
@@ -452,14 +452,14 @@ static const struct omap_clkctrl_bit_data omap4_ocp2scp_usb_phy_bit_data[] __ini };
static const struct omap_clkctrl_reg_data omap4_l3_init_clkctrl_regs[] __initconst = { - { OMAP4_MMC1_CLKCTRL, omap4_mmc1_bit_data, CLKF_SW_SUP, "l3_init_cm:clk:0008:24" }, - { OMAP4_MMC2_CLKCTRL, omap4_mmc2_bit_data, CLKF_SW_SUP, "l3_init_cm:clk:0010:24" }, - { OMAP4_HSI_CLKCTRL, omap4_hsi_bit_data, CLKF_HW_SUP, "l3_init_cm:clk:0018:24" }, + { OMAP4_MMC1_CLKCTRL, omap4_mmc1_bit_data, CLKF_SW_SUP, "l3-init-clkctrl:0008:24" }, + { OMAP4_MMC2_CLKCTRL, omap4_mmc2_bit_data, CLKF_SW_SUP, "l3-init-clkctrl:0010:24" }, + { OMAP4_HSI_CLKCTRL, omap4_hsi_bit_data, CLKF_HW_SUP, "l3-init-clkctrl:0018:24" }, { OMAP4_USB_HOST_HS_CLKCTRL, omap4_usb_host_hs_bit_data, CLKF_SW_SUP, "init_60m_fclk" }, { OMAP4_USB_OTG_HS_CLKCTRL, omap4_usb_otg_hs_bit_data, CLKF_HW_SUP, "l3_div_ck" }, { OMAP4_USB_TLL_HS_CLKCTRL, omap4_usb_tll_hs_bit_data, CLKF_HW_SUP, "l4_div_ck" }, { OMAP4_USB_HOST_FS_CLKCTRL, NULL, CLKF_SW_SUP, "func_48mc_fclk" }, - { OMAP4_OCP2SCP_USB_PHY_CLKCTRL, omap4_ocp2scp_usb_phy_bit_data, CLKF_HW_SUP, "l3_init_cm:clk:00c0:8" }, + { OMAP4_OCP2SCP_USB_PHY_CLKCTRL, omap4_ocp2scp_usb_phy_bit_data, CLKF_HW_SUP, "l3-init-clkctrl:00c0:8" }, { 0 }, };
@@ -530,7 +530,7 @@ static const struct omap_clkctrl_bit_data omap4_gpio6_bit_data[] __initconst = { };
static const char * const omap4_per_mcbsp4_gfclk_parents[] __initconst = { - "l4_per_cm:clk:00c0:26", + "l4-per-clkctrl:00c0:26", "pad_clks_ck", NULL, }; @@ -570,12 +570,12 @@ static const struct omap_clkctrl_bit_data omap4_slimbus2_bit_data[] __initconst };
static const struct omap_clkctrl_reg_data omap4_l4_per_clkctrl_regs[] __initconst = { - { OMAP4_TIMER10_CLKCTRL, omap4_timer10_bit_data, CLKF_SW_SUP, "l4_per_cm:clk:0008:24" }, - { OMAP4_TIMER11_CLKCTRL, omap4_timer11_bit_data, CLKF_SW_SUP, "l4_per_cm:clk:0010:24" }, - { OMAP4_TIMER2_CLKCTRL, omap4_timer2_bit_data, CLKF_SW_SUP, "l4_per_cm:clk:0018:24" }, - { OMAP4_TIMER3_CLKCTRL, omap4_timer3_bit_data, CLKF_SW_SUP, "l4_per_cm:clk:0020:24" }, - { OMAP4_TIMER4_CLKCTRL, omap4_timer4_bit_data, CLKF_SW_SUP, "l4_per_cm:clk:0028:24" }, - { OMAP4_TIMER9_CLKCTRL, omap4_timer9_bit_data, CLKF_SW_SUP, "l4_per_cm:clk:0030:24" }, + { OMAP4_TIMER10_CLKCTRL, omap4_timer10_bit_data, CLKF_SW_SUP, "l4-per-clkctrl:0008:24" }, + { OMAP4_TIMER11_CLKCTRL, omap4_timer11_bit_data, CLKF_SW_SUP, "l4-per-clkctrl:0010:24" }, + { OMAP4_TIMER2_CLKCTRL, omap4_timer2_bit_data, CLKF_SW_SUP, "l4-per-clkctrl:0018:24" }, + { OMAP4_TIMER3_CLKCTRL, omap4_timer3_bit_data, CLKF_SW_SUP, "l4-per-clkctrl:0020:24" }, + { OMAP4_TIMER4_CLKCTRL, omap4_timer4_bit_data, CLKF_SW_SUP, "l4-per-clkctrl:0028:24" }, + { OMAP4_TIMER9_CLKCTRL, omap4_timer9_bit_data, CLKF_SW_SUP, "l4-per-clkctrl:0030:24" }, { OMAP4_ELM_CLKCTRL, NULL, 0, "l4_div_ck" }, { OMAP4_GPIO2_CLKCTRL, omap4_gpio2_bit_data, CLKF_HW_SUP, "l4_div_ck" }, { OMAP4_GPIO3_CLKCTRL, omap4_gpio3_bit_data, CLKF_HW_SUP, "l4_div_ck" }, @@ -588,14 +588,14 @@ static const struct omap_clkctrl_reg_data omap4_l4_per_clkctrl_regs[] __initcons { OMAP4_I2C3_CLKCTRL, NULL, CLKF_SW_SUP, "func_96m_fclk" }, { OMAP4_I2C4_CLKCTRL, NULL, CLKF_SW_SUP, "func_96m_fclk" }, { OMAP4_L4_PER_CLKCTRL, NULL, 0, "l4_div_ck" }, - { OMAP4_MCBSP4_CLKCTRL, omap4_mcbsp4_bit_data, CLKF_SW_SUP, "l4_per_cm:clk:00c0:24" }, + { OMAP4_MCBSP4_CLKCTRL, omap4_mcbsp4_bit_data, CLKF_SW_SUP, "l4-per-clkctrl:00c0:24" }, { OMAP4_MCSPI1_CLKCTRL, NULL, CLKF_SW_SUP, "func_48m_fclk" }, { OMAP4_MCSPI2_CLKCTRL, NULL, CLKF_SW_SUP, "func_48m_fclk" }, { OMAP4_MCSPI3_CLKCTRL, NULL, CLKF_SW_SUP, "func_48m_fclk" }, { OMAP4_MCSPI4_CLKCTRL, NULL, CLKF_SW_SUP, "func_48m_fclk" }, { OMAP4_MMC3_CLKCTRL, NULL, CLKF_SW_SUP, "func_48m_fclk" }, { OMAP4_MMC4_CLKCTRL, NULL, CLKF_SW_SUP, "func_48m_fclk" }, - { OMAP4_SLIMBUS2_CLKCTRL, omap4_slimbus2_bit_data, CLKF_SW_SUP, "l4_per_cm:clk:0118:8" }, + { OMAP4_SLIMBUS2_CLKCTRL, omap4_slimbus2_bit_data, CLKF_SW_SUP, "l4-per-clkctrl:0118:8" }, { OMAP4_UART1_CLKCTRL, NULL, CLKF_SW_SUP, "func_48m_fclk" }, { OMAP4_UART2_CLKCTRL, NULL, CLKF_SW_SUP, "func_48m_fclk" }, { OMAP4_UART3_CLKCTRL, NULL, CLKF_SW_SUP, "func_48m_fclk" }, @@ -630,7 +630,7 @@ static const struct omap_clkctrl_reg_data omap4_l4_wkup_clkctrl_regs[] __initcon { OMAP4_L4_WKUP_CLKCTRL, NULL, 0, "l4_wkup_clk_mux_ck" }, { OMAP4_WD_TIMER2_CLKCTRL, NULL, CLKF_SW_SUP, "sys_32k_ck" }, { OMAP4_GPIO1_CLKCTRL, omap4_gpio1_bit_data, CLKF_HW_SUP, "l4_wkup_clk_mux_ck" }, - { OMAP4_TIMER1_CLKCTRL, omap4_timer1_bit_data, CLKF_SW_SUP, "l4_wkup_cm:clk:0020:24" }, + { OMAP4_TIMER1_CLKCTRL, omap4_timer1_bit_data, CLKF_SW_SUP, "l4-wkup-clkctrl:0020:24" }, { OMAP4_COUNTER_32K_CLKCTRL, NULL, 0, "sys_32k_ck" }, { OMAP4_KBD_CLKCTRL, NULL, CLKF_SW_SUP, "sys_32k_ck" }, { 0 }, @@ -644,7 +644,7 @@ static const char * const omap4_pmd_stm_clock_mux_ck_parents[] __initconst = { };
static const char * const omap4_trace_clk_div_div_ck_parents[] __initconst = { - "emu_sys_cm:clk:0000:22", + "emu-sys-clkctrl:0000:22", NULL, };
@@ -662,7 +662,7 @@ static const struct omap_clkctrl_div_data omap4_trace_clk_div_div_ck_data __init };
static const char * const omap4_stm_clk_div_ck_parents[] __initconst = { - "emu_sys_cm:clk:0000:20", + "emu-sys-clkctrl:0000:20", NULL, };
@@ -716,73 +716,73 @@ static struct ti_dt_clk omap44xx_clks[] = { * hwmod support. Once hwmod is removed, these can be removed * also. */ - DT_CLK(NULL, "aess_fclk", "abe_cm:0008:24"), - DT_CLK(NULL, "cm2_dm10_mux", "l4_per_cm:0008:24"), - DT_CLK(NULL, "cm2_dm11_mux", "l4_per_cm:0010:24"), - DT_CLK(NULL, "cm2_dm2_mux", "l4_per_cm:0018:24"), - DT_CLK(NULL, "cm2_dm3_mux", "l4_per_cm:0020:24"), - DT_CLK(NULL, "cm2_dm4_mux", "l4_per_cm:0028:24"), - DT_CLK(NULL, "cm2_dm9_mux", "l4_per_cm:0030:24"), - DT_CLK(NULL, "dmic_sync_mux_ck", "abe_cm:0018:26"), - DT_CLK(NULL, "dmt1_clk_mux", "l4_wkup_cm:0020:24"), - DT_CLK(NULL, "dss_48mhz_clk", "l3_dss_cm:0000:9"), - DT_CLK(NULL, "dss_dss_clk", "l3_dss_cm:0000:8"), - DT_CLK(NULL, "dss_sys_clk", "l3_dss_cm:0000:10"), - DT_CLK(NULL, "dss_tv_clk", "l3_dss_cm:0000:11"), - DT_CLK(NULL, "fdif_fck", "iss_cm:0008:24"), - DT_CLK(NULL, "func_dmic_abe_gfclk", "abe_cm:0018:24"), - DT_CLK(NULL, "func_mcasp_abe_gfclk", "abe_cm:0020:24"), - DT_CLK(NULL, "func_mcbsp1_gfclk", "abe_cm:0028:24"), - DT_CLK(NULL, "func_mcbsp2_gfclk", "abe_cm:0030:24"), - DT_CLK(NULL, "func_mcbsp3_gfclk", "abe_cm:0038:24"), - DT_CLK(NULL, "gpio1_dbclk", "l4_wkup_cm:0018:8"), - DT_CLK(NULL, "gpio2_dbclk", "l4_per_cm:0040:8"), - DT_CLK(NULL, "gpio3_dbclk", "l4_per_cm:0048:8"), - DT_CLK(NULL, "gpio4_dbclk", "l4_per_cm:0050:8"), - DT_CLK(NULL, "gpio5_dbclk", "l4_per_cm:0058:8"), - DT_CLK(NULL, "gpio6_dbclk", "l4_per_cm:0060:8"), - DT_CLK(NULL, "hsi_fck", "l3_init_cm:0018:24"), - DT_CLK(NULL, "hsmmc1_fclk", "l3_init_cm:0008:24"), - DT_CLK(NULL, "hsmmc2_fclk", "l3_init_cm:0010:24"), - DT_CLK(NULL, "iss_ctrlclk", "iss_cm:0000:8"), - DT_CLK(NULL, "mcasp_sync_mux_ck", "abe_cm:0020:26"), - DT_CLK(NULL, "mcbsp1_sync_mux_ck", "abe_cm:0028:26"), - DT_CLK(NULL, "mcbsp2_sync_mux_ck", "abe_cm:0030:26"), - DT_CLK(NULL, "mcbsp3_sync_mux_ck", "abe_cm:0038:26"), - DT_CLK(NULL, "mcbsp4_sync_mux_ck", "l4_per_cm:00c0:26"), - DT_CLK(NULL, "ocp2scp_usb_phy_phy_48m", "l3_init_cm:00c0:8"), - DT_CLK(NULL, "otg_60m_gfclk", "l3_init_cm:0040:24"), - DT_CLK(NULL, "per_mcbsp4_gfclk", "l4_per_cm:00c0:24"), - DT_CLK(NULL, "pmd_stm_clock_mux_ck", "emu_sys_cm:0000:20"), - DT_CLK(NULL, "pmd_trace_clk_mux_ck", "emu_sys_cm:0000:22"), - DT_CLK(NULL, "sgx_clk_mux", "l3_gfx_cm:0000:24"), - DT_CLK(NULL, "slimbus1_fclk_0", "abe_cm:0040:8"), - DT_CLK(NULL, "slimbus1_fclk_1", "abe_cm:0040:9"), - DT_CLK(NULL, "slimbus1_fclk_2", "abe_cm:0040:10"), - DT_CLK(NULL, "slimbus1_slimbus_clk", "abe_cm:0040:11"), - DT_CLK(NULL, "slimbus2_fclk_0", "l4_per_cm:0118:8"), - DT_CLK(NULL, "slimbus2_fclk_1", "l4_per_cm:0118:9"), - DT_CLK(NULL, "slimbus2_slimbus_clk", "l4_per_cm:0118:10"), - DT_CLK(NULL, "stm_clk_div_ck", "emu_sys_cm:0000:27"), - DT_CLK(NULL, "timer5_sync_mux", "abe_cm:0048:24"), - DT_CLK(NULL, "timer6_sync_mux", "abe_cm:0050:24"), - DT_CLK(NULL, "timer7_sync_mux", "abe_cm:0058:24"), - DT_CLK(NULL, "timer8_sync_mux", "abe_cm:0060:24"), - DT_CLK(NULL, "trace_clk_div_div_ck", "emu_sys_cm:0000:24"), - DT_CLK(NULL, "usb_host_hs_func48mclk", "l3_init_cm:0038:15"), - DT_CLK(NULL, "usb_host_hs_hsic480m_p1_clk", "l3_init_cm:0038:13"), - DT_CLK(NULL, "usb_host_hs_hsic480m_p2_clk", "l3_init_cm:0038:14"), - DT_CLK(NULL, "usb_host_hs_hsic60m_p1_clk", "l3_init_cm:0038:11"), - DT_CLK(NULL, "usb_host_hs_hsic60m_p2_clk", "l3_init_cm:0038:12"), - DT_CLK(NULL, "usb_host_hs_utmi_p1_clk", "l3_init_cm:0038:8"), - DT_CLK(NULL, "usb_host_hs_utmi_p2_clk", "l3_init_cm:0038:9"), - DT_CLK(NULL, "usb_host_hs_utmi_p3_clk", "l3_init_cm:0038:10"), - DT_CLK(NULL, "usb_otg_hs_xclk", "l3_init_cm:0040:8"), - DT_CLK(NULL, "usb_tll_hs_usb_ch0_clk", "l3_init_cm:0048:8"), - DT_CLK(NULL, "usb_tll_hs_usb_ch1_clk", "l3_init_cm:0048:9"), - DT_CLK(NULL, "usb_tll_hs_usb_ch2_clk", "l3_init_cm:0048:10"), - DT_CLK(NULL, "utmi_p1_gfclk", "l3_init_cm:0038:24"), - DT_CLK(NULL, "utmi_p2_gfclk", "l3_init_cm:0038:25"), + DT_CLK(NULL, "aess_fclk", "abe-clkctrl:0008:24"), + DT_CLK(NULL, "cm2_dm10_mux", "l4-per-clkctrl:0008:24"), + DT_CLK(NULL, "cm2_dm11_mux", "l4-per-clkctrl:0010:24"), + DT_CLK(NULL, "cm2_dm2_mux", "l4-per-clkctrl:0018:24"), + DT_CLK(NULL, "cm2_dm3_mux", "l4-per-clkctrl:0020:24"), + DT_CLK(NULL, "cm2_dm4_mux", "l4-per-clkctrl:0028:24"), + DT_CLK(NULL, "cm2_dm9_mux", "l4-per-clkctrl:0030:24"), + DT_CLK(NULL, "dmic_sync_mux_ck", "abe-clkctrl:0018:26"), + DT_CLK(NULL, "dmt1_clk_mux", "l4-wkup-clkctrl:0020:24"), + DT_CLK(NULL, "dss_48mhz_clk", "l3-dss-clkctrl:0000:9"), + DT_CLK(NULL, "dss_dss_clk", "l3-dss-clkctrl:0000:8"), + DT_CLK(NULL, "dss_sys_clk", "l3-dss-clkctrl:0000:10"), + DT_CLK(NULL, "dss_tv_clk", "l3-dss-clkctrl:0000:11"), + DT_CLK(NULL, "fdif_fck", "iss-clkctrl:0008:24"), + DT_CLK(NULL, "func_dmic_abe_gfclk", "abe-clkctrl:0018:24"), + DT_CLK(NULL, "func_mcasp_abe_gfclk", "abe-clkctrl:0020:24"), + DT_CLK(NULL, "func_mcbsp1_gfclk", "abe-clkctrl:0028:24"), + DT_CLK(NULL, "func_mcbsp2_gfclk", "abe-clkctrl:0030:24"), + DT_CLK(NULL, "func_mcbsp3_gfclk", "abe-clkctrl:0038:24"), + DT_CLK(NULL, "gpio1_dbclk", "l4-wkup-clkctrl:0018:8"), + DT_CLK(NULL, "gpio2_dbclk", "l4-per-clkctrl:0040:8"), + DT_CLK(NULL, "gpio3_dbclk", "l4-per-clkctrl:0048:8"), + DT_CLK(NULL, "gpio4_dbclk", "l4-per-clkctrl:0050:8"), + DT_CLK(NULL, "gpio5_dbclk", "l4-per-clkctrl:0058:8"), + DT_CLK(NULL, "gpio6_dbclk", "l4-per-clkctrl:0060:8"), + DT_CLK(NULL, "hsi_fck", "l3-init-clkctrl:0018:24"), + DT_CLK(NULL, "hsmmc1_fclk", "l3-init-clkctrl:0008:24"), + DT_CLK(NULL, "hsmmc2_fclk", "l3-init-clkctrl:0010:24"), + DT_CLK(NULL, "iss_ctrlclk", "iss-clkctrl:0000:8"), + DT_CLK(NULL, "mcasp_sync_mux_ck", "abe-clkctrl:0020:26"), + DT_CLK(NULL, "mcbsp1_sync_mux_ck", "abe-clkctrl:0028:26"), + DT_CLK(NULL, "mcbsp2_sync_mux_ck", "abe-clkctrl:0030:26"), + DT_CLK(NULL, "mcbsp3_sync_mux_ck", "abe-clkctrl:0038:26"), + DT_CLK(NULL, "mcbsp4_sync_mux_ck", "l4-per-clkctrl:00c0:26"), + DT_CLK(NULL, "ocp2scp_usb_phy_phy_48m", "l3-init-clkctrl:00c0:8"), + DT_CLK(NULL, "otg_60m_gfclk", "l3-init-clkctrl:0040:24"), + DT_CLK(NULL, "per_mcbsp4_gfclk", "l4-per-clkctrl:00c0:24"), + DT_CLK(NULL, "pmd_stm_clock_mux_ck", "emu-sys-clkctrl:0000:20"), + DT_CLK(NULL, "pmd_trace_clk_mux_ck", "emu-sys-clkctrl:0000:22"), + DT_CLK(NULL, "sgx_clk_mux", "l3-gfx-clkctrl:0000:24"), + DT_CLK(NULL, "slimbus1_fclk_0", "abe-clkctrl:0040:8"), + DT_CLK(NULL, "slimbus1_fclk_1", "abe-clkctrl:0040:9"), + DT_CLK(NULL, "slimbus1_fclk_2", "abe-clkctrl:0040:10"), + DT_CLK(NULL, "slimbus1_slimbus_clk", "abe-clkctrl:0040:11"), + DT_CLK(NULL, "slimbus2_fclk_0", "l4-per-clkctrl:0118:8"), + DT_CLK(NULL, "slimbus2_fclk_1", "l4-per-clkctrl:0118:9"), + DT_CLK(NULL, "slimbus2_slimbus_clk", "l4-per-clkctrl:0118:10"), + DT_CLK(NULL, "stm_clk_div_ck", "emu-sys-clkctrl:0000:27"), + DT_CLK(NULL, "timer5_sync_mux", "abe-clkctrl:0048:24"), + DT_CLK(NULL, "timer6_sync_mux", "abe-clkctrl:0050:24"), + DT_CLK(NULL, "timer7_sync_mux", "abe-clkctrl:0058:24"), + DT_CLK(NULL, "timer8_sync_mux", "abe-clkctrl:0060:24"), + DT_CLK(NULL, "trace_clk_div_div_ck", "emu-sys-clkctrl:0000:24"), + DT_CLK(NULL, "usb_host_hs_func48mclk", "l3-init-clkctrl:0038:15"), + DT_CLK(NULL, "usb_host_hs_hsic480m_p1_clk", "l3-init-clkctrl:0038:13"), + DT_CLK(NULL, "usb_host_hs_hsic480m_p2_clk", "l3-init-clkctrl:0038:14"), + DT_CLK(NULL, "usb_host_hs_hsic60m_p1_clk", "l3-init-clkctrl:0038:11"), + DT_CLK(NULL, "usb_host_hs_hsic60m_p2_clk", "l3-init-clkctrl:0038:12"), + DT_CLK(NULL, "usb_host_hs_utmi_p1_clk", "l3-init-clkctrl:0038:8"), + DT_CLK(NULL, "usb_host_hs_utmi_p2_clk", "l3-init-clkctrl:0038:9"), + DT_CLK(NULL, "usb_host_hs_utmi_p3_clk", "l3_init-clkctrl:0038:10"), + DT_CLK(NULL, "usb_otg_hs_xclk", "l3-init-clkctrl:0040:8"), + DT_CLK(NULL, "usb_tll_hs_usb_ch0_clk", "l3-init-clkctrl:0048:8"), + DT_CLK(NULL, "usb_tll_hs_usb_ch1_clk", "l3-init-clkctrl:0048:9"), + DT_CLK(NULL, "usb_tll_hs_usb_ch2_clk", "l3-init-clkctrl:0048:10"), + DT_CLK(NULL, "utmi_p1_gfclk", "l3-init-clkctrl:0038:24"), + DT_CLK(NULL, "utmi_p2_gfclk", "l3-init-clkctrl:0038:25"), { .node_name = NULL }, };
diff --git a/drivers/clk/ti/clk-54xx.c b/drivers/clk/ti/clk-54xx.c index 90e0a9ea6351..b4aff76eb373 100644 --- a/drivers/clk/ti/clk-54xx.c +++ b/drivers/clk/ti/clk-54xx.c @@ -50,7 +50,7 @@ static const struct omap_clkctrl_bit_data omap5_aess_bit_data[] __initconst = { };
static const char * const omap5_dmic_gfclk_parents[] __initconst = { - "abe_cm:clk:0018:26", + "abe-clkctrl:0018:26", "pad_clks_ck", "slimbus_clk", NULL, @@ -70,7 +70,7 @@ static const struct omap_clkctrl_bit_data omap5_dmic_bit_data[] __initconst = { };
static const char * const omap5_mcbsp1_gfclk_parents[] __initconst = { - "abe_cm:clk:0028:26", + "abe-clkctrl:0028:26", "pad_clks_ck", "slimbus_clk", NULL, @@ -83,7 +83,7 @@ static const struct omap_clkctrl_bit_data omap5_mcbsp1_bit_data[] __initconst = };
static const char * const omap5_mcbsp2_gfclk_parents[] __initconst = { - "abe_cm:clk:0030:26", + "abe-clkctrl:0030:26", "pad_clks_ck", "slimbus_clk", NULL, @@ -96,7 +96,7 @@ static const struct omap_clkctrl_bit_data omap5_mcbsp2_bit_data[] __initconst = };
static const char * const omap5_mcbsp3_gfclk_parents[] __initconst = { - "abe_cm:clk:0038:26", + "abe-clkctrl:0038:26", "pad_clks_ck", "slimbus_clk", NULL, @@ -136,16 +136,16 @@ static const struct omap_clkctrl_bit_data omap5_timer8_bit_data[] __initconst =
static const struct omap_clkctrl_reg_data omap5_abe_clkctrl_regs[] __initconst = { { OMAP5_L4_ABE_CLKCTRL, NULL, 0, "abe_iclk" }, - { OMAP5_AESS_CLKCTRL, omap5_aess_bit_data, CLKF_SW_SUP, "abe_cm:clk:0008:24" }, + { OMAP5_AESS_CLKCTRL, omap5_aess_bit_data, CLKF_SW_SUP, "abe-clkctrl:0008:24" }, { OMAP5_MCPDM_CLKCTRL, NULL, CLKF_SW_SUP, "pad_clks_ck" }, - { OMAP5_DMIC_CLKCTRL, omap5_dmic_bit_data, CLKF_SW_SUP, "abe_cm:clk:0018:24" }, - { OMAP5_MCBSP1_CLKCTRL, omap5_mcbsp1_bit_data, CLKF_SW_SUP, "abe_cm:clk:0028:24" }, - { OMAP5_MCBSP2_CLKCTRL, omap5_mcbsp2_bit_data, CLKF_SW_SUP, "abe_cm:clk:0030:24" }, - { OMAP5_MCBSP3_CLKCTRL, omap5_mcbsp3_bit_data, CLKF_SW_SUP, "abe_cm:clk:0038:24" }, - { OMAP5_TIMER5_CLKCTRL, omap5_timer5_bit_data, CLKF_SW_SUP, "abe_cm:clk:0048:24" }, - { OMAP5_TIMER6_CLKCTRL, omap5_timer6_bit_data, CLKF_SW_SUP, "abe_cm:clk:0050:24" }, - { OMAP5_TIMER7_CLKCTRL, omap5_timer7_bit_data, CLKF_SW_SUP, "abe_cm:clk:0058:24" }, - { OMAP5_TIMER8_CLKCTRL, omap5_timer8_bit_data, CLKF_SW_SUP, "abe_cm:clk:0060:24" }, + { OMAP5_DMIC_CLKCTRL, omap5_dmic_bit_data, CLKF_SW_SUP, "abe-clkctrl:0018:24" }, + { OMAP5_MCBSP1_CLKCTRL, omap5_mcbsp1_bit_data, CLKF_SW_SUP, "abe-clkctrl:0028:24" }, + { OMAP5_MCBSP2_CLKCTRL, omap5_mcbsp2_bit_data, CLKF_SW_SUP, "abe-clkctrl:0030:24" }, + { OMAP5_MCBSP3_CLKCTRL, omap5_mcbsp3_bit_data, CLKF_SW_SUP, "abe-clkctrl:0038:24" }, + { OMAP5_TIMER5_CLKCTRL, omap5_timer5_bit_data, CLKF_SW_SUP, "abe-clkctrl:0048:24" }, + { OMAP5_TIMER6_CLKCTRL, omap5_timer6_bit_data, CLKF_SW_SUP, "abe-clkctrl:0050:24" }, + { OMAP5_TIMER7_CLKCTRL, omap5_timer7_bit_data, CLKF_SW_SUP, "abe-clkctrl:0058:24" }, + { OMAP5_TIMER8_CLKCTRL, omap5_timer8_bit_data, CLKF_SW_SUP, "abe-clkctrl:0060:24" }, { 0 }, };
@@ -268,12 +268,12 @@ static const struct omap_clkctrl_bit_data omap5_gpio8_bit_data[] __initconst = { };
static const struct omap_clkctrl_reg_data omap5_l4per_clkctrl_regs[] __initconst = { - { OMAP5_TIMER10_CLKCTRL, omap5_timer10_bit_data, CLKF_SW_SUP, "l4per_cm:clk:0008:24" }, - { OMAP5_TIMER11_CLKCTRL, omap5_timer11_bit_data, CLKF_SW_SUP, "l4per_cm:clk:0010:24" }, - { OMAP5_TIMER2_CLKCTRL, omap5_timer2_bit_data, CLKF_SW_SUP, "l4per_cm:clk:0018:24" }, - { OMAP5_TIMER3_CLKCTRL, omap5_timer3_bit_data, CLKF_SW_SUP, "l4per_cm:clk:0020:24" }, - { OMAP5_TIMER4_CLKCTRL, omap5_timer4_bit_data, CLKF_SW_SUP, "l4per_cm:clk:0028:24" }, - { OMAP5_TIMER9_CLKCTRL, omap5_timer9_bit_data, CLKF_SW_SUP, "l4per_cm:clk:0030:24" }, + { OMAP5_TIMER10_CLKCTRL, omap5_timer10_bit_data, CLKF_SW_SUP, "l4per-clkctrl:0008:24" }, + { OMAP5_TIMER11_CLKCTRL, omap5_timer11_bit_data, CLKF_SW_SUP, "l4per-clkctrl:0010:24" }, + { OMAP5_TIMER2_CLKCTRL, omap5_timer2_bit_data, CLKF_SW_SUP, "l4per-clkctrl:0018:24" }, + { OMAP5_TIMER3_CLKCTRL, omap5_timer3_bit_data, CLKF_SW_SUP, "l4per-clkctrl:0020:24" }, + { OMAP5_TIMER4_CLKCTRL, omap5_timer4_bit_data, CLKF_SW_SUP, "l4per-clkctrl:0028:24" }, + { OMAP5_TIMER9_CLKCTRL, omap5_timer9_bit_data, CLKF_SW_SUP, "l4per-clkctrl:0030:24" }, { OMAP5_GPIO2_CLKCTRL, omap5_gpio2_bit_data, CLKF_HW_SUP, "l4_root_clk_div" }, { OMAP5_GPIO3_CLKCTRL, omap5_gpio3_bit_data, CLKF_HW_SUP, "l4_root_clk_div" }, { OMAP5_GPIO4_CLKCTRL, omap5_gpio4_bit_data, CLKF_HW_SUP, "l4_root_clk_div" }, @@ -345,7 +345,7 @@ static const struct omap_clkctrl_bit_data omap5_dss_core_bit_data[] __initconst };
static const struct omap_clkctrl_reg_data omap5_dss_clkctrl_regs[] __initconst = { - { OMAP5_DSS_CORE_CLKCTRL, omap5_dss_core_bit_data, CLKF_SW_SUP, "dss_cm:clk:0000:8" }, + { OMAP5_DSS_CORE_CLKCTRL, omap5_dss_core_bit_data, CLKF_SW_SUP, "dss-clkctrl:0000:8" }, { 0 }, };
@@ -378,7 +378,7 @@ static const struct omap_clkctrl_bit_data omap5_gpu_core_bit_data[] __initconst };
static const struct omap_clkctrl_reg_data omap5_gpu_clkctrl_regs[] __initconst = { - { OMAP5_GPU_CLKCTRL, omap5_gpu_core_bit_data, CLKF_SW_SUP, "gpu_cm:clk:0000:24" }, + { OMAP5_GPU_CLKCTRL, omap5_gpu_core_bit_data, CLKF_SW_SUP, "gpu-clkctrl:0000:24" }, { 0 }, };
@@ -389,7 +389,7 @@ static const char * const omap5_mmc1_fclk_mux_parents[] __initconst = { };
static const char * const omap5_mmc1_fclk_parents[] __initconst = { - "l3init_cm:clk:0008:24", + "l3init-clkctrl:0008:24", NULL, };
@@ -405,7 +405,7 @@ static const struct omap_clkctrl_bit_data omap5_mmc1_bit_data[] __initconst = { };
static const char * const omap5_mmc2_fclk_parents[] __initconst = { - "l3init_cm:clk:0010:24", + "l3init-clkctrl:0010:24", NULL, };
@@ -430,12 +430,12 @@ static const char * const omap5_usb_host_hs_hsic480m_p3_clk_parents[] __initcons };
static const char * const omap5_usb_host_hs_utmi_p1_clk_parents[] __initconst = { - "l3init_cm:clk:0038:24", + "l3init-clkctrl:0038:24", NULL, };
static const char * const omap5_usb_host_hs_utmi_p2_clk_parents[] __initconst = { - "l3init_cm:clk:0038:25", + "l3init-clkctrl:0038:25", NULL, };
@@ -494,8 +494,8 @@ static const struct omap_clkctrl_bit_data omap5_usb_otg_ss_bit_data[] __initcons };
static const struct omap_clkctrl_reg_data omap5_l3init_clkctrl_regs[] __initconst = { - { OMAP5_MMC1_CLKCTRL, omap5_mmc1_bit_data, CLKF_SW_SUP, "l3init_cm:clk:0008:25" }, - { OMAP5_MMC2_CLKCTRL, omap5_mmc2_bit_data, CLKF_SW_SUP, "l3init_cm:clk:0010:25" }, + { OMAP5_MMC1_CLKCTRL, omap5_mmc1_bit_data, CLKF_SW_SUP, "l3init-clkctrl:0008:25" }, + { OMAP5_MMC2_CLKCTRL, omap5_mmc2_bit_data, CLKF_SW_SUP, "l3init-clkctrl:0010:25" }, { OMAP5_USB_HOST_HS_CLKCTRL, omap5_usb_host_hs_bit_data, CLKF_SW_SUP, "l3init_60m_fclk" }, { OMAP5_USB_TLL_HS_CLKCTRL, omap5_usb_tll_hs_bit_data, CLKF_HW_SUP, "l4_root_clk_div" }, { OMAP5_SATA_CLKCTRL, omap5_sata_bit_data, CLKF_SW_SUP, "func_48m_fclk" }, @@ -519,7 +519,7 @@ static const struct omap_clkctrl_reg_data omap5_wkupaon_clkctrl_regs[] __initcon { OMAP5_L4_WKUP_CLKCTRL, NULL, 0, "wkupaon_iclk_mux" }, { OMAP5_WD_TIMER2_CLKCTRL, NULL, CLKF_SW_SUP, "sys_32k_ck" }, { OMAP5_GPIO1_CLKCTRL, omap5_gpio1_bit_data, CLKF_HW_SUP, "wkupaon_iclk_mux" }, - { OMAP5_TIMER1_CLKCTRL, omap5_timer1_bit_data, CLKF_SW_SUP, "wkupaon_cm:clk:0020:24" }, + { OMAP5_TIMER1_CLKCTRL, omap5_timer1_bit_data, CLKF_SW_SUP, "wkupaon-clkctrl:0020:24" }, { OMAP5_COUNTER_32K_CLKCTRL, NULL, 0, "wkupaon_iclk_mux" }, { OMAP5_KBD_CLKCTRL, NULL, CLKF_SW_SUP, "sys_32k_ck" }, { 0 }, @@ -549,58 +549,58 @@ const struct omap_clkctrl_data omap5_clkctrl_data[] __initconst = { static struct ti_dt_clk omap54xx_clks[] = { DT_CLK(NULL, "timer_32k_ck", "sys_32k_ck"), DT_CLK(NULL, "sys_clkin_ck", "sys_clkin"), - DT_CLK(NULL, "dmic_gfclk", "abe_cm:0018:24"), - DT_CLK(NULL, "dmic_sync_mux_ck", "abe_cm:0018:26"), - DT_CLK(NULL, "dss_32khz_clk", "dss_cm:0000:11"), - DT_CLK(NULL, "dss_48mhz_clk", "dss_cm:0000:9"), - DT_CLK(NULL, "dss_dss_clk", "dss_cm:0000:8"), - DT_CLK(NULL, "dss_sys_clk", "dss_cm:0000:10"), - DT_CLK(NULL, "gpio1_dbclk", "wkupaon_cm:0018:8"), - DT_CLK(NULL, "gpio2_dbclk", "l4per_cm:0040:8"), - DT_CLK(NULL, "gpio3_dbclk", "l4per_cm:0048:8"), - DT_CLK(NULL, "gpio4_dbclk", "l4per_cm:0050:8"), - DT_CLK(NULL, "gpio5_dbclk", "l4per_cm:0058:8"), - DT_CLK(NULL, "gpio6_dbclk", "l4per_cm:0060:8"), - DT_CLK(NULL, "gpio7_dbclk", "l4per_cm:00f0:8"), - DT_CLK(NULL, "gpio8_dbclk", "l4per_cm:00f8:8"), - DT_CLK(NULL, "mcbsp1_gfclk", "abe_cm:0028:24"), - DT_CLK(NULL, "mcbsp1_sync_mux_ck", "abe_cm:0028:26"), - DT_CLK(NULL, "mcbsp2_gfclk", "abe_cm:0030:24"), - DT_CLK(NULL, "mcbsp2_sync_mux_ck", "abe_cm:0030:26"), - DT_CLK(NULL, "mcbsp3_gfclk", "abe_cm:0038:24"), - DT_CLK(NULL, "mcbsp3_sync_mux_ck", "abe_cm:0038:26"), - DT_CLK(NULL, "mmc1_32khz_clk", "l3init_cm:0008:8"), - DT_CLK(NULL, "mmc1_fclk", "l3init_cm:0008:25"), - DT_CLK(NULL, "mmc1_fclk_mux", "l3init_cm:0008:24"), - DT_CLK(NULL, "mmc2_fclk", "l3init_cm:0010:25"), - DT_CLK(NULL, "mmc2_fclk_mux", "l3init_cm:0010:24"), - DT_CLK(NULL, "sata_ref_clk", "l3init_cm:0068:8"), - DT_CLK(NULL, "timer10_gfclk_mux", "l4per_cm:0008:24"), - DT_CLK(NULL, "timer11_gfclk_mux", "l4per_cm:0010:24"), - DT_CLK(NULL, "timer1_gfclk_mux", "wkupaon_cm:0020:24"), - DT_CLK(NULL, "timer2_gfclk_mux", "l4per_cm:0018:24"), - DT_CLK(NULL, "timer3_gfclk_mux", "l4per_cm:0020:24"), - DT_CLK(NULL, "timer4_gfclk_mux", "l4per_cm:0028:24"), - DT_CLK(NULL, "timer5_gfclk_mux", "abe_cm:0048:24"), - DT_CLK(NULL, "timer6_gfclk_mux", "abe_cm:0050:24"), - DT_CLK(NULL, "timer7_gfclk_mux", "abe_cm:0058:24"), - DT_CLK(NULL, "timer8_gfclk_mux", "abe_cm:0060:24"), - DT_CLK(NULL, "timer9_gfclk_mux", "l4per_cm:0030:24"), - DT_CLK(NULL, "usb_host_hs_hsic480m_p1_clk", "l3init_cm:0038:13"), - DT_CLK(NULL, "usb_host_hs_hsic480m_p2_clk", "l3init_cm:0038:14"), - DT_CLK(NULL, "usb_host_hs_hsic480m_p3_clk", "l3init_cm:0038:7"), - DT_CLK(NULL, "usb_host_hs_hsic60m_p1_clk", "l3init_cm:0038:11"), - DT_CLK(NULL, "usb_host_hs_hsic60m_p2_clk", "l3init_cm:0038:12"), - DT_CLK(NULL, "usb_host_hs_hsic60m_p3_clk", "l3init_cm:0038:6"), - DT_CLK(NULL, "usb_host_hs_utmi_p1_clk", "l3init_cm:0038:8"), - DT_CLK(NULL, "usb_host_hs_utmi_p2_clk", "l3init_cm:0038:9"), - DT_CLK(NULL, "usb_host_hs_utmi_p3_clk", "l3init_cm:0038:10"), - DT_CLK(NULL, "usb_otg_ss_refclk960m", "l3init_cm:00d0:8"), - DT_CLK(NULL, "usb_tll_hs_usb_ch0_clk", "l3init_cm:0048:8"), - DT_CLK(NULL, "usb_tll_hs_usb_ch1_clk", "l3init_cm:0048:9"), - DT_CLK(NULL, "usb_tll_hs_usb_ch2_clk", "l3init_cm:0048:10"), - DT_CLK(NULL, "utmi_p1_gfclk", "l3init_cm:0038:24"), - DT_CLK(NULL, "utmi_p2_gfclk", "l3init_cm:0038:25"), + DT_CLK(NULL, "dmic_gfclk", "abe-clkctrl:0018:24"), + DT_CLK(NULL, "dmic_sync_mux_ck", "abe-clkctrl:0018:26"), + DT_CLK(NULL, "dss_32khz_clk", "dss-clkctrl:0000:11"), + DT_CLK(NULL, "dss_48mhz_clk", "dss-clkctrl:0000:9"), + DT_CLK(NULL, "dss_dss_clk", "dss-clkctrl:0000:8"), + DT_CLK(NULL, "dss_sys_clk", "dss-clkctrl:0000:10"), + DT_CLK(NULL, "gpio1_dbclk", "wkupaon-clkctrl:0018:8"), + DT_CLK(NULL, "gpio2_dbclk", "l4per-clkctrl:0040:8"), + DT_CLK(NULL, "gpio3_dbclk", "l4per-clkctrl:0048:8"), + DT_CLK(NULL, "gpio4_dbclk", "l4per-clkctrl:0050:8"), + DT_CLK(NULL, "gpio5_dbclk", "l4per-clkctrl:0058:8"), + DT_CLK(NULL, "gpio6_dbclk", "l4per-clkctrl:0060:8"), + DT_CLK(NULL, "gpio7_dbclk", "l4per-clkctrl:00f0:8"), + DT_CLK(NULL, "gpio8_dbclk", "l4per-clkctrl:00f8:8"), + DT_CLK(NULL, "mcbsp1_gfclk", "abe-clkctrl:0028:24"), + DT_CLK(NULL, "mcbsp1_sync_mux_ck", "abe-clkctrl:0028:26"), + DT_CLK(NULL, "mcbsp2_gfclk", "abe-clkctrl:0030:24"), + DT_CLK(NULL, "mcbsp2_sync_mux_ck", "abe-clkctrl:0030:26"), + DT_CLK(NULL, "mcbsp3_gfclk", "abe-clkctrl:0038:24"), + DT_CLK(NULL, "mcbsp3_sync_mux_ck", "abe-clkctrl:0038:26"), + DT_CLK(NULL, "mmc1_32khz_clk", "l3init-clkctrl:0008:8"), + DT_CLK(NULL, "mmc1_fclk", "l3init-clkctrl:0008:25"), + DT_CLK(NULL, "mmc1_fclk_mux", "l3init-clkctrl:0008:24"), + DT_CLK(NULL, "mmc2_fclk", "l3init-clkctrl:0010:25"), + DT_CLK(NULL, "mmc2_fclk_mux", "l3init-clkctrl:0010:24"), + DT_CLK(NULL, "sata_ref_clk", "l3init-clkctrl:0068:8"), + DT_CLK(NULL, "timer10_gfclk_mux", "l4per-clkctrl:0008:24"), + DT_CLK(NULL, "timer11_gfclk_mux", "l4per-clkctrl:0010:24"), + DT_CLK(NULL, "timer1_gfclk_mux", "wkupaon-clkctrl:0020:24"), + DT_CLK(NULL, "timer2_gfclk_mux", "l4per-clkctrl:0018:24"), + DT_CLK(NULL, "timer3_gfclk_mux", "l4per-clkctrl:0020:24"), + DT_CLK(NULL, "timer4_gfclk_mux", "l4per-clkctrl:0028:24"), + DT_CLK(NULL, "timer5_gfclk_mux", "abe-clkctrl:0048:24"), + DT_CLK(NULL, "timer6_gfclk_mux", "abe-clkctrl:0050:24"), + DT_CLK(NULL, "timer7_gfclk_mux", "abe-clkctrl:0058:24"), + DT_CLK(NULL, "timer8_gfclk_mux", "abe-clkctrl:0060:24"), + DT_CLK(NULL, "timer9_gfclk_mux", "l4per-clkctrl:0030:24"), + DT_CLK(NULL, "usb_host_hs_hsic480m_p1_clk", "l3init-clkctrl:0038:13"), + DT_CLK(NULL, "usb_host_hs_hsic480m_p2_clk", "l3init-clkctrl:0038:14"), + DT_CLK(NULL, "usb_host_hs_hsic480m_p3_clk", "l3init-clkctrl:0038:7"), + DT_CLK(NULL, "usb_host_hs_hsic60m_p1_clk", "l3init-clkctrl:0038:11"), + DT_CLK(NULL, "usb_host_hs_hsic60m_p2_clk", "l3init-clkctrl:0038:12"), + DT_CLK(NULL, "usb_host_hs_hsic60m_p3_clk", "l3init-clkctrl:0038:6"), + DT_CLK(NULL, "usb_host_hs_utmi_p1_clk", "l3init-clkctrl:0038:8"), + DT_CLK(NULL, "usb_host_hs_utmi_p2_clk", "l3init-clkctrl:0038:9"), + DT_CLK(NULL, "usb_host_hs_utmi_p3_clk", "l3init-clkctrl:0038:10"), + DT_CLK(NULL, "usb_otg_ss_refclk960m", "l3init-clkctrl:00d0:8"), + DT_CLK(NULL, "usb_tll_hs_usb_ch0_clk", "l3init-clkctrl:0048:8"), + DT_CLK(NULL, "usb_tll_hs_usb_ch1_clk", "l3init-clkctrl:0048:9"), + DT_CLK(NULL, "usb_tll_hs_usb_ch2_clk", "l3init-clkctrl:0048:10"), + DT_CLK(NULL, "utmi_p1_gfclk", "l3init-clkctrl:0038:24"), + DT_CLK(NULL, "utmi_p2_gfclk", "l3init-clkctrl:0038:25"), { .node_name = NULL }, };
diff --git a/drivers/clk/ti/clkctrl.c b/drivers/clk/ti/clkctrl.c index 864c484bde1b..08a85c559f79 100644 --- a/drivers/clk/ti/clkctrl.c +++ b/drivers/clk/ti/clkctrl.c @@ -511,10 +511,6 @@ static void __init _ti_omap4_clkctrl_setup(struct device_node *node) char *c; u16 soc_mask = 0;
- if (!(ti_clk_get_features()->flags & TI_CLK_CLKCTRL_COMPAT) && - of_node_name_eq(node, "clk")) - ti_clk_features.flags |= TI_CLK_CLKCTRL_COMPAT; - addrp = of_get_address(node, 0, NULL, NULL); addr = (u32)of_translate_address(node, addrp);
From: Po-Wen Kao powen.kao@mediatek.com
[ Upstream commit 3fd23b8dfb54d9b74eba6dfdd3225db3ac116785 ]
Currently the LPM configurations of device regulators may not work since VCC is not disabled yet while ufs_mtk_vreg_set_lpm() is executed.
Fix this by changing the timing of invoking ufs_mtk_vreg_set_lpm().
Link: https://lore.kernel.org/r/20220616053725.5681-5-stanley.chu@mediatek.com Reviewed-by: Stanley Chu stanley.chu@mediatek.com Signed-off-by: Po-Wen Kao powen.kao@mediatek.com Signed-off-by: Stanley Chu stanley.chu@mediatek.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/ufs/ufs-mediatek.c | 58 ++++++++++++++++++++++++++++++--- 1 file changed, 53 insertions(+), 5 deletions(-)
diff --git a/drivers/scsi/ufs/ufs-mediatek.c b/drivers/scsi/ufs/ufs-mediatek.c index 4e53857605de..9f1d69d33149 100644 --- a/drivers/scsi/ufs/ufs-mediatek.c +++ b/drivers/scsi/ufs/ufs-mediatek.c @@ -949,7 +949,6 @@ static int ufs_mtk_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op) * ufshcd_suspend() re-enabling regulators while vreg is still * in low-power mode. */ - ufs_mtk_vreg_set_lpm(hba, true); err = ufs_mtk_mphy_power_on(hba, false); if (err) goto fail; @@ -973,12 +972,13 @@ static int ufs_mtk_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op) { int err;
+ if (hba->ufshcd_state != UFSHCD_STATE_OPERATIONAL) + ufs_mtk_vreg_set_lpm(hba, false); + err = ufs_mtk_mphy_power_on(hba, true); if (err) goto fail;
- ufs_mtk_vreg_set_lpm(hba, false); - if (ufshcd_is_link_hibern8(hba)) { err = ufs_mtk_link_set_hpm(hba); if (err) @@ -1139,9 +1139,57 @@ static int ufs_mtk_remove(struct platform_device *pdev) return 0; }
+int ufs_mtk_system_suspend(struct device *dev) +{ + struct ufs_hba *hba = dev_get_drvdata(dev); + int ret; + + ret = ufshcd_system_suspend(dev); + if (ret) + return ret; + + ufs_mtk_vreg_set_lpm(hba, true); + + return 0; +} + +int ufs_mtk_system_resume(struct device *dev) +{ + struct ufs_hba *hba = dev_get_drvdata(dev); + + ufs_mtk_vreg_set_lpm(hba, false); + + return ufshcd_system_resume(dev); +} + +int ufs_mtk_runtime_suspend(struct device *dev) +{ + struct ufs_hba *hba = dev_get_drvdata(dev); + int ret = 0; + + ret = ufshcd_runtime_suspend(dev); + if (ret) + return ret; + + ufs_mtk_vreg_set_lpm(hba, true); + + return 0; +} + +int ufs_mtk_runtime_resume(struct device *dev) +{ + struct ufs_hba *hba = dev_get_drvdata(dev); + + ufs_mtk_vreg_set_lpm(hba, false); + + return ufshcd_runtime_resume(dev); +} + static const struct dev_pm_ops ufs_mtk_pm_ops = { - SET_SYSTEM_SLEEP_PM_OPS(ufshcd_system_suspend, ufshcd_system_resume) - SET_RUNTIME_PM_OPS(ufshcd_runtime_suspend, ufshcd_runtime_resume, NULL) + SET_SYSTEM_SLEEP_PM_OPS(ufs_mtk_system_suspend, + ufs_mtk_system_resume) + SET_RUNTIME_PM_OPS(ufs_mtk_runtime_suspend, + ufs_mtk_runtime_resume, NULL) .prepare = ufshcd_suspend_prepare, .complete = ufshcd_resume_complete, };
From: Liang He windhl@126.com
[ Upstream commit 40a959d7042bb7711e404ad2318b30e9f92c6b9b ]
In ohci_hcd_ppc_of_probe(), of_find_compatible_node() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore.
Acked-by: Alan Stern stern@rowland.harvard.edu Signed-off-by: Liang He windhl@126.com Link: https://lore.kernel.org/r/20220617034637.4003115-1-windhl@126.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/host/ohci-ppc-of.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/usb/host/ohci-ppc-of.c b/drivers/usb/host/ohci-ppc-of.c index 45f7cceb6df3..98e46725999e 100644 --- a/drivers/usb/host/ohci-ppc-of.c +++ b/drivers/usb/host/ohci-ppc-of.c @@ -169,6 +169,7 @@ static int ohci_hcd_ppc_of_probe(struct platform_device *op) release_mem_region(res.start, 0x4); } else pr_debug("%s: cannot get ehci offset from fdt\n", __FILE__); + of_node_put(np); }
irq_dispose_mapping(irq);
From: Liang He windhl@126.com
[ Upstream commit 9d6d5303c39b8bc182475b22f45504106a07f086 ]
In usbhs_rza1_hardware_init(), of_find_node_by_name() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore.
Signed-off-by: Liang He windhl@126.com Link: https://lore.kernel.org/r/20220618023205.4056548-1-windhl@126.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/renesas_usbhs/rza.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/drivers/usb/renesas_usbhs/rza.c b/drivers/usb/renesas_usbhs/rza.c index 24de64edb674..2d77edefb4b3 100644 --- a/drivers/usb/renesas_usbhs/rza.c +++ b/drivers/usb/renesas_usbhs/rza.c @@ -23,6 +23,10 @@ static int usbhs_rza1_hardware_init(struct platform_device *pdev) extal_clk = of_find_node_by_name(NULL, "extal"); of_property_read_u32(usb_x1_clk, "clock-frequency", &freq_usb); of_property_read_u32(extal_clk, "clock-frequency", &freq_extal); + + of_node_put(usb_x1_clk); + of_node_put(extal_clk); + if (freq_usb == 0) { if (freq_extal == 12000000) { /* Select 12MHz XTAL */
From: Amelie Delaunay amelie.delaunay@foss.st.com
[ Upstream commit db638c6500abaffb8f7770b2a69c40d003d54ae1 ]
When using usb-role-switch, D+ pull-up is set as soon as DTCL_SFTDISCON is cleared, whatever the vbus valid signal state is. The pull-up should not be set when vbus isn't present (this is determined by the drd controller).
This patch ensures that B-Session (so Peripheral role + vbus valid signal) is valid before clearing the DCTL_SFTDISCON bit when role switch is used. Keep original behavior when usb-role-switch isn't used.
Acked-by: Minas Harutyunyan hminas@synopsys.com Signed-off-by: Amelie Delaunay amelie.delaunay@foss.st.com Signed-off-by: Fabrice Gasnier fabrice.gasnier@foss.st.com Link: https://lore.kernel.org/r/20220622160717.314580-1-fabrice.gasnier@foss.st.co... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/dwc2/gadget.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index e1cebf581a4a..519bb82b00e8 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -3594,7 +3594,8 @@ void dwc2_hsotg_core_disconnect(struct dwc2_hsotg *hsotg) void dwc2_hsotg_core_connect(struct dwc2_hsotg *hsotg) { /* remove the soft-disconnect and let's go */ - dwc2_clear_bit(hsotg, DCTL, DCTL_SFTDISCON); + if (!hsotg->role_sw || (dwc2_readl(hsotg, GOTGCTL) & GOTGCTL_BSESVLD)) + dwc2_clear_bit(hsotg, DCTL, DCTL_SFTDISCON); }
/**
From: Pascal Terjan pterjan@google.com
[ Upstream commit 6169525b76764acb81918aa387ac168fb9a55575 ]
When relying on devm it doesn't get freed early enough which causes the following warning when unloading the module:
[249348.837181] remove_proc_entry: removing non-empty directory 'irq/20', leaking at least 'vboxguest' [249348.837219] WARNING: CPU: 0 PID: 6708 at fs/proc/generic.c:715 remove_proc_entry+0x119/0x140
[249348.837379] Call Trace: [249348.837385] unregister_irq_proc+0xbd/0xe0 [249348.837392] free_desc+0x23/0x60 [249348.837396] irq_free_descs+0x4a/0x70 [249348.837401] irq_domain_free_irqs+0x160/0x1a0 [249348.837452] mp_unmap_irq+0x5c/0x60 [249348.837458] acpi_unregister_gsi_ioapic+0x29/0x40 [249348.837463] acpi_unregister_gsi+0x17/0x30 [249348.837467] acpi_pci_irq_disable+0xbf/0xe0 [249348.837473] pcibios_disable_device+0x20/0x30 [249348.837478] pci_disable_device+0xef/0x120 [249348.837482] vbg_pci_remove+0x6c/0x70 [vboxguest]
Reviewed-by: Hans de Goede hdegoede@redhat.com Signed-off-by: Pascal Terjan pterjan@google.com Link: https://lore.kernel.org/r/20220612133744.4030602-1-pterjan@google.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/virt/vboxguest/vboxguest_linux.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/virt/vboxguest/vboxguest_linux.c b/drivers/virt/vboxguest/vboxguest_linux.c index 73eb34849eab..4ccfd30c2a30 100644 --- a/drivers/virt/vboxguest/vboxguest_linux.c +++ b/drivers/virt/vboxguest/vboxguest_linux.c @@ -356,8 +356,8 @@ static int vbg_pci_probe(struct pci_dev *pci, const struct pci_device_id *id) goto err_vbg_core_exit; }
- ret = devm_request_irq(dev, pci->irq, vbg_core_isr, IRQF_SHARED, - DEVICE_NAME, gdev); + ret = request_irq(pci->irq, vbg_core_isr, IRQF_SHARED, DEVICE_NAME, + gdev); if (ret) { vbg_err("vboxguest: Error requesting irq: %d\n", ret); goto err_vbg_core_exit; @@ -367,7 +367,7 @@ static int vbg_pci_probe(struct pci_dev *pci, const struct pci_device_id *id) if (ret) { vbg_err("vboxguest: Error misc_register %s failed: %d\n", DEVICE_NAME, ret); - goto err_vbg_core_exit; + goto err_free_irq; }
ret = misc_register(&gdev->misc_device_user); @@ -403,6 +403,8 @@ static int vbg_pci_probe(struct pci_dev *pci, const struct pci_device_id *id) misc_deregister(&gdev->misc_device_user); err_unregister_misc_device: misc_deregister(&gdev->misc_device); +err_free_irq: + free_irq(pci->irq, gdev); err_vbg_core_exit: vbg_core_exit(gdev); err_disable_pcidev: @@ -419,6 +421,7 @@ static void vbg_pci_remove(struct pci_dev *pci) vbg_gdev = NULL; mutex_unlock(&vbg_gdev_mutex);
+ free_irq(pci->irq, gdev); device_remove_file(gdev->dev, &dev_attr_host_features); device_remove_file(gdev->dev, &dev_attr_host_version); misc_deregister(&gdev->misc_device_user);
From: Robert Marko robimarko@gmail.com
[ Upstream commit 1bf7305e79aab095196131bdc87a97796e0e3fac ]
Once the usb sleep clocks are disabled, clock framework is trying to disable the sleep clock source also.
However, it seems that it cannot be disabled and trying to do so produces: [ 245.436390] ------------[ cut here ]------------ [ 245.441233] gcc_sleep_clk_src status stuck at 'on' [ 245.441254] WARNING: CPU: 2 PID: 223 at clk_branch_wait+0x130/0x140 [ 245.450435] Modules linked in: xhci_plat_hcd xhci_hcd dwc3 dwc3_qcom leds_gpio [ 245.456601] CPU: 2 PID: 223 Comm: sh Not tainted 5.18.0-rc4 #215 [ 245.463889] Hardware name: Xiaomi AX9000 (DT) [ 245.470050] pstate: 204000c5 (nzCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 245.474307] pc : clk_branch_wait+0x130/0x140 [ 245.481073] lr : clk_branch_wait+0x130/0x140 [ 245.485588] sp : ffffffc009f2bad0 [ 245.489838] x29: ffffffc009f2bad0 x28: ffffff8003e6c800 x27: 0000000000000000 [ 245.493057] x26: 0000000000000000 x25: 0000000000000000 x24: ffffff800226ef20 [ 245.500175] x23: ffffffc0089ff550 x22: 0000000000000000 x21: ffffffc008476ad0 [ 245.507294] x20: 0000000000000000 x19: ffffffc00965ac70 x18: fffffffffffc51a7 [ 245.514413] x17: 68702e3030303837 x16: 3a6d726f6674616c x15: ffffffc089f2b777 [ 245.521531] x14: ffffffc0095c9d18 x13: 0000000000000129 x12: 0000000000000129 [ 245.528649] x11: 00000000ffffffea x10: ffffffc009621d18 x9 : 0000000000000001 [ 245.535767] x8 : 0000000000000001 x7 : 0000000000017fe8 x6 : 0000000000000001 [ 245.542885] x5 : ffffff803fdca6d8 x4 : 0000000000000000 x3 : 0000000000000027 [ 245.550002] x2 : 0000000000000027 x1 : 0000000000000023 x0 : 0000000000000026 [ 245.557122] Call trace: [ 245.564229] clk_branch_wait+0x130/0x140 [ 245.566490] clk_branch2_disable+0x2c/0x40 [ 245.570656] clk_core_disable+0x60/0xb0 [ 245.574561] clk_core_disable+0x68/0xb0 [ 245.578293] clk_disable+0x30/0x50 [ 245.582113] dwc3_qcom_remove+0x60/0xc0 [dwc3_qcom] [ 245.585588] platform_remove+0x28/0x60 [ 245.590361] device_remove+0x4c/0x80 [ 245.594179] device_release_driver_internal+0x1dc/0x230 [ 245.597914] device_driver_detach+0x18/0x30 [ 245.602861] unbind_store+0xec/0x110 [ 245.607027] drv_attr_store+0x24/0x40 [ 245.610847] sysfs_kf_write+0x44/0x60 [ 245.614405] kernfs_fop_write_iter+0x128/0x1c0 [ 245.618052] new_sync_write+0xc0/0x130 [ 245.622391] vfs_write+0x1d4/0x2a0 [ 245.626123] ksys_write+0x58/0xe0 [ 245.629508] __arm64_sys_write+0x1c/0x30 [ 245.632895] invoke_syscall.constprop.0+0x5c/0x110 [ 245.636890] do_el0_svc+0xa0/0x150 [ 245.641488] el0_svc+0x18/0x60 [ 245.644872] el0t_64_sync_handler+0xa4/0x130 [ 245.647914] el0t_64_sync+0x174/0x178 [ 245.652340] ---[ end trace 0000000000000000 ]---
So, add CLK_IS_CRITICAL flag to the clock so that the kernel won't try to disable the sleep clock.
Signed-off-by: Robert Marko robimarko@gmail.com Signed-off-by: Bjorn Andersson bjorn.andersson@linaro.org Link: https://lore.kernel.org/r/20220515210048.483898-10-robimarko@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/clk/qcom/gcc-ipq8074.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/clk/qcom/gcc-ipq8074.c b/drivers/clk/qcom/gcc-ipq8074.c index 541016db3c4b..6bdf65a6e33d 100644 --- a/drivers/clk/qcom/gcc-ipq8074.c +++ b/drivers/clk/qcom/gcc-ipq8074.c @@ -662,6 +662,7 @@ static struct clk_branch gcc_sleep_clk_src = { }, .num_parents = 1, .ops = &clk_branch2_ops, + .flags = CLK_IS_CRITICAL, }, }, };
From: Jean-Philippe Brucker jean-philippe@linaro.org
[ Upstream commit 80fc671bcc0173836e9032b0c698ea74c13b9d7c ]
The uacce driver must deal with a possible removal of the parent device or parent driver module rmmod at any time.
Although uacce_remove(), called on device removal and on driver unbind, prevents future use of the uacce fops by removing the cdev, fops that were called before that point may still be running.
Serialize uacce_fops_open() and uacce_remove() with uacce->mutex. Serialize other fops against uacce_remove() with q->mutex. Since we need to protect uacce_fops_poll() which gets called on the fast path, replace uacce->queues_lock with q->mutex to improve scalability. The other fops are only used during setup.
uacce_queue_is_valid(), checked under q->mutex or uacce->mutex, denotes whether uacce_remove() has disabled all queues. If that is the case, don't go any further since the parent device is being removed and uacce->ops should not be called anymore.
Reported-by: Yang Shen shenyang39@huawei.com Signed-off-by: Zhangfei Gao zhangfei.gao@linaro.org Signed-off-by: Jean-Philippe Brucker jean-philippe@linaro.org Link: https://lore.kernel.org/r/20220701034843.7502-1-zhangfei.gao@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/misc/uacce/uacce.c | 133 ++++++++++++++++++++++++------------- include/linux/uacce.h | 6 +- 2 files changed, 91 insertions(+), 48 deletions(-)
diff --git a/drivers/misc/uacce/uacce.c b/drivers/misc/uacce/uacce.c index 488eeb2811ae..976d051071dc 100644 --- a/drivers/misc/uacce/uacce.c +++ b/drivers/misc/uacce/uacce.c @@ -9,43 +9,38 @@
static struct class *uacce_class; static dev_t uacce_devt; -static DEFINE_MUTEX(uacce_mutex); static DEFINE_XARRAY_ALLOC(uacce_xa);
-static int uacce_start_queue(struct uacce_queue *q) +/* + * If the parent driver or the device disappears, the queue state is invalid and + * ops are not usable anymore. + */ +static bool uacce_queue_is_valid(struct uacce_queue *q) { - int ret = 0; + return q->state == UACCE_Q_INIT || q->state == UACCE_Q_STARTED; +}
- mutex_lock(&uacce_mutex); +static int uacce_start_queue(struct uacce_queue *q) +{ + int ret;
- if (q->state != UACCE_Q_INIT) { - ret = -EINVAL; - goto out_with_lock; - } + if (q->state != UACCE_Q_INIT) + return -EINVAL;
if (q->uacce->ops->start_queue) { ret = q->uacce->ops->start_queue(q); if (ret < 0) - goto out_with_lock; + return ret; }
q->state = UACCE_Q_STARTED; - -out_with_lock: - mutex_unlock(&uacce_mutex); - - return ret; + return 0; }
static int uacce_put_queue(struct uacce_queue *q) { struct uacce_device *uacce = q->uacce;
- mutex_lock(&uacce_mutex); - - if (q->state == UACCE_Q_ZOMBIE) - goto out; - if ((q->state == UACCE_Q_STARTED) && uacce->ops->stop_queue) uacce->ops->stop_queue(q);
@@ -54,8 +49,6 @@ static int uacce_put_queue(struct uacce_queue *q) uacce->ops->put_queue(q);
q->state = UACCE_Q_ZOMBIE; -out: - mutex_unlock(&uacce_mutex);
return 0; } @@ -65,20 +58,36 @@ static long uacce_fops_unl_ioctl(struct file *filep, { struct uacce_queue *q = filep->private_data; struct uacce_device *uacce = q->uacce; + long ret = -ENXIO; + + /* + * uacce->ops->ioctl() may take the mmap_lock when copying arg to/from + * user. Avoid a circular lock dependency with uacce_fops_mmap(), which + * gets called with mmap_lock held, by taking uacce->mutex instead of + * q->mutex. Doing this in uacce_fops_mmap() is not possible because + * uacce_fops_open() calls iommu_sva_bind_device(), which takes + * mmap_lock, while holding uacce->mutex. + */ + mutex_lock(&uacce->mutex); + if (!uacce_queue_is_valid(q)) + goto out_unlock;
switch (cmd) { case UACCE_CMD_START_Q: - return uacce_start_queue(q); - + ret = uacce_start_queue(q); + break; case UACCE_CMD_PUT_Q: - return uacce_put_queue(q); - + ret = uacce_put_queue(q); + break; default: - if (!uacce->ops->ioctl) - return -EINVAL; - - return uacce->ops->ioctl(q, cmd, arg); + if (uacce->ops->ioctl) + ret = uacce->ops->ioctl(q, cmd, arg); + else + ret = -EINVAL; } +out_unlock: + mutex_unlock(&uacce->mutex); + return ret; }
#ifdef CONFIG_COMPAT @@ -136,6 +145,13 @@ static int uacce_fops_open(struct inode *inode, struct file *filep) if (!q) return -ENOMEM;
+ mutex_lock(&uacce->mutex); + + if (!uacce->parent) { + ret = -EINVAL; + goto out_with_mem; + } + ret = uacce_bind_queue(uacce, q); if (ret) goto out_with_mem; @@ -152,10 +168,9 @@ static int uacce_fops_open(struct inode *inode, struct file *filep) filep->private_data = q; uacce->inode = inode; q->state = UACCE_Q_INIT; - - mutex_lock(&uacce->queues_lock); + mutex_init(&q->mutex); list_add(&q->list, &uacce->queues); - mutex_unlock(&uacce->queues_lock); + mutex_unlock(&uacce->mutex);
return 0;
@@ -163,18 +178,20 @@ static int uacce_fops_open(struct inode *inode, struct file *filep) uacce_unbind_queue(q); out_with_mem: kfree(q); + mutex_unlock(&uacce->mutex); return ret; }
static int uacce_fops_release(struct inode *inode, struct file *filep) { struct uacce_queue *q = filep->private_data; + struct uacce_device *uacce = q->uacce;
- mutex_lock(&q->uacce->queues_lock); - list_del(&q->list); - mutex_unlock(&q->uacce->queues_lock); + mutex_lock(&uacce->mutex); uacce_put_queue(q); uacce_unbind_queue(q); + list_del(&q->list); + mutex_unlock(&uacce->mutex); kfree(q);
return 0; @@ -217,10 +234,9 @@ static int uacce_fops_mmap(struct file *filep, struct vm_area_struct *vma) vma->vm_private_data = q; qfr->type = type;
- mutex_lock(&uacce_mutex); - - if (q->state != UACCE_Q_INIT && q->state != UACCE_Q_STARTED) { - ret = -EINVAL; + mutex_lock(&q->mutex); + if (!uacce_queue_is_valid(q)) { + ret = -ENXIO; goto out_with_lock; }
@@ -248,12 +264,12 @@ static int uacce_fops_mmap(struct file *filep, struct vm_area_struct *vma) }
q->qfrs[type] = qfr; - mutex_unlock(&uacce_mutex); + mutex_unlock(&q->mutex);
return ret;
out_with_lock: - mutex_unlock(&uacce_mutex); + mutex_unlock(&q->mutex); kfree(qfr); return ret; } @@ -262,12 +278,20 @@ static __poll_t uacce_fops_poll(struct file *file, poll_table *wait) { struct uacce_queue *q = file->private_data; struct uacce_device *uacce = q->uacce; + __poll_t ret = 0; + + mutex_lock(&q->mutex); + if (!uacce_queue_is_valid(q)) + goto out_unlock;
poll_wait(file, &q->wait, wait); + if (uacce->ops->is_q_updated && uacce->ops->is_q_updated(q)) - return EPOLLIN | EPOLLRDNORM; + ret = EPOLLIN | EPOLLRDNORM;
- return 0; +out_unlock: + mutex_unlock(&q->mutex); + return ret; }
static const struct file_operations uacce_fops = { @@ -450,7 +474,7 @@ struct uacce_device *uacce_alloc(struct device *parent, goto err_with_uacce;
INIT_LIST_HEAD(&uacce->queues); - mutex_init(&uacce->queues_lock); + mutex_init(&uacce->mutex); device_initialize(&uacce->dev); uacce->dev.devt = MKDEV(MAJOR(uacce_devt), uacce->dev_id); uacce->dev.class = uacce_class; @@ -507,13 +531,23 @@ void uacce_remove(struct uacce_device *uacce) if (uacce->inode) unmap_mapping_range(uacce->inode->i_mapping, 0, 0, 1);
+ /* + * uacce_fops_open() may be running concurrently, even after we remove + * the cdev. Holding uacce->mutex ensures that open() does not obtain a + * removed uacce device. + */ + mutex_lock(&uacce->mutex); /* ensure no open queue remains */ - mutex_lock(&uacce->queues_lock); list_for_each_entry_safe(q, next_q, &uacce->queues, list) { + /* + * Taking q->mutex ensures that fops do not use the defunct + * uacce->ops after the queue is disabled. + */ + mutex_lock(&q->mutex); uacce_put_queue(q); + mutex_unlock(&q->mutex); uacce_unbind_queue(q); } - mutex_unlock(&uacce->queues_lock);
/* disable sva now since no opened queues */ uacce_disable_sva(uacce); @@ -521,6 +555,13 @@ void uacce_remove(struct uacce_device *uacce) if (uacce->cdev) cdev_device_del(uacce->cdev, &uacce->dev); xa_erase(&uacce_xa, uacce->dev_id); + /* + * uacce exists as long as there are open fds, but ops will be freed + * now. Ensure that bugs cause NULL deref rather than use-after-free. + */ + uacce->ops = NULL; + uacce->parent = NULL; + mutex_unlock(&uacce->mutex); put_device(&uacce->dev); } EXPORT_SYMBOL_GPL(uacce_remove); diff --git a/include/linux/uacce.h b/include/linux/uacce.h index 48e319f40275..9ce88c28b0a8 100644 --- a/include/linux/uacce.h +++ b/include/linux/uacce.h @@ -70,6 +70,7 @@ enum uacce_q_state { * @wait: wait queue head * @list: index into uacce queues list * @qfrs: pointer of qfr regions + * @mutex: protects queue state * @state: queue state machine * @pasid: pasid associated to the mm * @handle: iommu_sva handle returned by iommu_sva_bind_device() @@ -80,6 +81,7 @@ struct uacce_queue { wait_queue_head_t wait; struct list_head list; struct uacce_qfile_region *qfrs[UACCE_MAX_REGION]; + struct mutex mutex; enum uacce_q_state state; u32 pasid; struct iommu_sva *handle; @@ -97,9 +99,9 @@ struct uacce_queue { * @dev_id: id of the uacce device * @cdev: cdev of the uacce * @dev: dev of the uacce + * @mutex: protects uacce operation * @priv: private pointer of the uacce * @queues: list of queues - * @queues_lock: lock for queues list * @inode: core vfs */ struct uacce_device { @@ -113,9 +115,9 @@ struct uacce_device { u32 dev_id; struct cdev *cdev; struct device dev; + struct mutex mutex; void *priv; struct list_head queues; - struct mutex queues_lock; struct inode *inode; };
From: Sergey Senozhatsky senozhatsky@chromium.org
[ Upstream commit dc89997264de565999a1cb55db3f295d3a8e457b ]
Always use crypto_has_comp() so that crypto can lookup module, call usermodhelper to load the modules, wait for usermodhelper to finish and so on. Otherwise crypto will do all of these steps under CPU hot-plug lock and this looks like too much stuff to handle under the CPU hot-plug lock. Besides this can end up in a deadlock when usermodhelper triggers a code path that attempts to lock the CPU hot-plug lock, that zram already holds.
An example of such deadlock:
- path A. zram grabs CPU hot-plug lock, execs /sbin/modprobe from crypto and waits for modprobe to finish
disksize_store zcomp_create __cpuhp_state_add_instance __cpuhp_state_add_instance_cpuslocked zcomp_cpu_up_prepare crypto_alloc_base crypto_alg_mod_lookup call_usermodehelper_exec wait_for_completion_killable do_wait_for_common schedule
- path B. async work kthread that brings in scsi device. It wants to register CPUHP states at some point, and it needs the CPU hot-plug lock for that, which is owned by zram.
async_run_entry_fn scsi_probe_and_add_lun scsi_mq_alloc_queue blk_mq_init_queue blk_mq_init_allocated_queue blk_mq_realloc_hw_ctxs __cpuhp_state_add_instance __cpuhp_state_add_instance_cpuslocked mutex_lock schedule
- path C. modprobe sleeps, waiting for all aync works to finish.
load_module do_init_module async_synchronize_full async_synchronize_cookie_domain schedule
[senozhatsky@chromium.org: add comment] Link: https://lkml.kernel.org/r/20220624060606.1014474-1-senozhatsky@chromium.org Link: https://lkml.kernel.org/r/20220622023501.517125-1-senozhatsky@chromium.org Signed-off-by: Sergey Senozhatsky senozhatsky@chromium.org Cc: Minchan Kim minchan@kernel.org Cc: Nitin Gupta ngupta@vflare.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/block/zram/zcomp.c | 11 +++++------ 1 file changed, 5 insertions(+), 6 deletions(-)
diff --git a/drivers/block/zram/zcomp.c b/drivers/block/zram/zcomp.c index 052aa3f65514..0916de952e09 100644 --- a/drivers/block/zram/zcomp.c +++ b/drivers/block/zram/zcomp.c @@ -63,12 +63,6 @@ static int zcomp_strm_init(struct zcomp_strm *zstrm, struct zcomp *comp)
bool zcomp_available_algorithm(const char *comp) { - int i; - - i = sysfs_match_string(backends, comp); - if (i >= 0) - return true; - /* * Crypto does not ignore a trailing new line symbol, * so make sure you don't supply a string containing @@ -217,6 +211,11 @@ struct zcomp *zcomp_create(const char *compress) struct zcomp *comp; int error;
+ /* + * Crypto API will execute /sbin/modprobe if the compression module + * is not loaded yet. We must do it here, otherwise we are about to + * call /sbin/modprobe under CPU hot-plug lock. + */ if (!zcomp_available_algorithm(compress)) return ERR_PTR(-EINVAL);
From: Vladimir Zapolskiy vladimir.zapolskiy@linaro.org
[ Upstream commit 94bed9bb05c7850ff5d80b87cc29004901f37956 ]
After merging lucid and trion pll functions in commit 0b01489475c6 ("clk: qcom: clk-alpha-pll: same regs and ops for trion and lucid") the function clk_trion_pll_configure() is left with an old description header, which results in a W=2 compile time warning, fix it.
Acked-by: Stephen Boyd sboyd@kernel.org Reviewed-by: Vinod Koul vkoul@kernel.org Signed-off-by: Vladimir Zapolskiy vladimir.zapolskiy@linaro.org Signed-off-by: Bjorn Andersson bjorn.andersson@linaro.org Link: https://lore.kernel.org/r/20220701062711.2757855-1-vladimir.zapolskiy@linaro... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/clk/qcom/clk-alpha-pll.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/clk/qcom/clk-alpha-pll.c b/drivers/clk/qcom/clk-alpha-pll.c index 8f65b9bdafce..5e44ceb730ad 100644 --- a/drivers/clk/qcom/clk-alpha-pll.c +++ b/drivers/clk/qcom/clk-alpha-pll.c @@ -1420,7 +1420,7 @@ const struct clk_ops clk_alpha_pll_postdiv_fabia_ops = { EXPORT_SYMBOL_GPL(clk_alpha_pll_postdiv_fabia_ops);
/** - * clk_lucid_pll_configure - configure the lucid pll + * clk_trion_pll_configure - configure the trion pll * * @pll: clk alpha pll * @regmap: register map
From: James Smart jsmart2021@gmail.com
[ Upstream commit f8191d40aa612981ce897e66cda6a88db8df17bb ]
Malformed user input to debugfs results in buffer overflow crashes. Adapt input string lengths to fit within internal buffers, leaving space for NULL terminators.
Link: https://lore.kernel.org/r/20220701211425.2708-3-jsmart2021@gmail.com Co-developed-by: Justin Tee justin.tee@broadcom.com Signed-off-by: Justin Tee justin.tee@broadcom.com Signed-off-by: James Smart jsmart2021@gmail.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/lpfc/lpfc_debugfs.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c index 08b2e85dcd7d..79bc86ba59b3 100644 --- a/drivers/scsi/lpfc/lpfc_debugfs.c +++ b/drivers/scsi/lpfc/lpfc_debugfs.c @@ -2607,8 +2607,8 @@ lpfc_debugfs_multixripools_write(struct file *file, const char __user *buf, struct lpfc_sli4_hdw_queue *qp; struct lpfc_multixri_pool *multixri_pool;
- if (nbytes > 64) - nbytes = 64; + if (nbytes > sizeof(mybuf) - 1) + nbytes = sizeof(mybuf) - 1;
memset(mybuf, 0, sizeof(mybuf));
@@ -2688,8 +2688,8 @@ lpfc_debugfs_nvmestat_write(struct file *file, const char __user *buf, if (!phba->targetport) return -ENXIO;
- if (nbytes > 64) - nbytes = 64; + if (nbytes > sizeof(mybuf) - 1) + nbytes = sizeof(mybuf) - 1;
memset(mybuf, 0, sizeof(mybuf));
@@ -2826,8 +2826,8 @@ lpfc_debugfs_ioktime_write(struct file *file, const char __user *buf, char mybuf[64]; char *pbuf;
- if (nbytes > 64) - nbytes = 64; + if (nbytes > sizeof(mybuf) - 1) + nbytes = sizeof(mybuf) - 1;
memset(mybuf, 0, sizeof(mybuf));
@@ -2954,8 +2954,8 @@ lpfc_debugfs_nvmeio_trc_write(struct file *file, const char __user *buf, char mybuf[64]; char *pbuf;
- if (nbytes > 63) - nbytes = 63; + if (nbytes > sizeof(mybuf) - 1) + nbytes = sizeof(mybuf) - 1;
memset(mybuf, 0, sizeof(mybuf));
@@ -3060,8 +3060,8 @@ lpfc_debugfs_hdwqstat_write(struct file *file, const char __user *buf, char *pbuf; int i;
- if (nbytes > 64) - nbytes = 64; + if (nbytes > sizeof(mybuf) - 1) + nbytes = sizeof(mybuf) - 1;
memset(mybuf, 0, sizeof(mybuf));
From: James Smart jsmart2021@gmail.com
[ Upstream commit 2f67dc7970bce3529edce93a0a14234d88b3fcd5 ]
There is no corresponding free routine if lpfc_sli4_issue_wqe fails to issue the CMF WQE in lpfc_issue_cmf_sync_wqe.
If ret_val is non-zero, then free the iocbq request structure.
Link: https://lore.kernel.org/r/20220701211425.2708-6-jsmart2021@gmail.com Co-developed-by: Justin Tee justin.tee@broadcom.com Signed-off-by: Justin Tee justin.tee@broadcom.com Signed-off-by: James Smart jsmart2021@gmail.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/scsi/lpfc/lpfc_sli.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c index d8d26cde70b6..d5a47fdf8650 100644 --- a/drivers/scsi/lpfc/lpfc_sli.c +++ b/drivers/scsi/lpfc/lpfc_sli.c @@ -2007,10 +2007,12 @@ lpfc_issue_cmf_sync_wqe(struct lpfc_hba *phba, u32 ms, u64 total)
sync_buf->iocb_flag |= LPFC_IO_CMF; ret_val = lpfc_sli4_issue_wqe(phba, &phba->sli4_hba.hdwq[0], sync_buf); - if (ret_val) + if (ret_val) { lpfc_printf_log(phba, KERN_INFO, LOG_CGN_MGMT, "6214 Cannot issue CMF_SYNC_WQE: x%x\n", ret_val); + __lpfc_sli_release_iocbq(phba, sync_buf); + } out_unlock: spin_unlock_irqrestore(&phba->hbalock, iflags); return ret_val;
From: Jozef Martiniak jomajm@gmail.com
[ Upstream commit 04cb742d4d8f30dc2e83b46ac317eec09191c68e ]
after usb_ep_queue() if wait_for_completion_interruptible() is interrupted we need to wait until IRQ gets finished.
Otherwise complete() from epio_complete() can corrupt stack.
Signed-off-by: Jozef Martiniak jomajm@gmail.com Link: https://lore.kernel.org/r/20220708070645.6130-1-jomajm@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/gadget/legacy/inode.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/usb/gadget/legacy/inode.c b/drivers/usb/gadget/legacy/inode.c index 3279b4767424..9e8b678f0548 100644 --- a/drivers/usb/gadget/legacy/inode.c +++ b/drivers/usb/gadget/legacy/inode.c @@ -362,6 +362,7 @@ ep_io (struct ep_data *epdata, void *buf, unsigned len) spin_unlock_irq (&epdata->dev->lock);
DBG (epdata->dev, "endpoint gone\n"); + wait_for_completion(&done); epdata->status = -ENODEV; } }
From: Nick Desaulniers ndesaulniers@google.com
[ Upstream commit 4d45bc82df667ad9e9cb8361830e54fc1264e993 ]
When the following configs are enabled: * CORESIGHT * CORESIGHT_SOURCE_ETM4X * UBSAN * UBSAN_TRAP
Clang fails assemble the kernel with the error: <instantiation>:1:7: error: expected constant expression in '.inst' directive .inst (0xd5200000|((((2) << 19) | ((1) << 16) | (((((((((((0x160 + (i * 4))))) >> 2))) >> 7) & 0x7)) << 12) | ((((((((((0x160 + (i * 4))))) >> 2))) & 0xf)) << 8) | (((((((((((0x160 + (i * 4))))) >> 2))) >> 4) & 0x7)) << 5)))|(.L__reg_num_x8)) ^ drivers/hwtracing/coresight/coresight-etm4x-core.c:702:4: note: while in macro instantiation etm4x_relaxed_read32(csa, TRCCNTVRn(i)); ^ drivers/hwtracing/coresight/coresight-etm4x.h:403:4: note: expanded from macro 'etm4x_relaxed_read32' read_etm4x_sysreg_offset((offset), false))) ^ drivers/hwtracing/coresight/coresight-etm4x.h:383:12: note: expanded from macro 'read_etm4x_sysreg_offset' __val = read_etm4x_sysreg_const_offset((offset)); \ ^ drivers/hwtracing/coresight/coresight-etm4x.h:149:2: note: expanded from macro 'read_etm4x_sysreg_const_offset' READ_ETM4x_REG(ETM4x_OFFSET_TO_REG(offset)) ^ drivers/hwtracing/coresight/coresight-etm4x.h:144:2: note: expanded from macro 'READ_ETM4x_REG' read_sysreg_s(ETM4x_REG_NUM_TO_SYSREG((reg))) ^ arch/arm64/include/asm/sysreg.h:1108:15: note: expanded from macro 'read_sysreg_s' asm volatile(__mrs_s("%0", r) : "=r" (__val)); \ ^ arch/arm64/include/asm/sysreg.h:1074:2: note: expanded from macro '__mrs_s' " mrs_s " v ", " __stringify(r) "\n" \ ^
Consider the definitions of TRCSSCSRn and TRCCNTVRn: drivers/hwtracing/coresight/coresight-etm4x.h:56 #define TRCCNTVRn(n) (0x160 + (n * 4)) drivers/hwtracing/coresight/coresight-etm4x.h:81 #define TRCSSCSRn(n) (0x2A0 + (n * 4))
Where the macro parameter is expanded to i; a loop induction variable from etm4_disable_hw.
When any compiler can determine that loops may be unrolled, then the __builtin_constant_p check in read_etm4x_sysreg_offset() defined in drivers/hwtracing/coresight/coresight-etm4x.h may evaluate to true. This can lead to the expression `(0x160 + (i * 4))` being passed to read_etm4x_sysreg_const_offset. Via the trace above, this is passed through READ_ETM4x_REG, read_sysreg_s, and finally to __mrs_s where it is string-ified and used directly in inline asm.
Regardless of which compiler or compiler options determine whether a loop can or can't be unrolled, which determines whether __builtin_constant_p evaluates to true when passed an expression using a loop induction variable, it is NEVER safe to allow the preprocessor to construct inline asm like: asm volatile (".inst (0x160 + (i * 4))" : "=r"(__val)); ^ expected constant expression
Instead of read_etm4x_sysreg_offset() using __builtin_constant_p(), use __is_constexpr from include/linux/const.h instead to ensure only expressions that are valid integer constant expressions get passed through to read_sysreg_s().
This is not a bug in clang; it's a potentially unsafe use of the macro arguments in read_etm4x_sysreg_offset dependent on __builtin_constant_p.
Link: https://github.com/ClangBuiltLinux/linux/issues/1310 Reported-by: Arnd Bergmann arnd@kernel.org Reported-by: Tao Zhang quic_taozha@quicinc.com Signed-off-by: Nick Desaulniers ndesaulniers@google.com Acked-by: Arnd Bergmann arnd@arndb.de Signed-off-by: Suzuki K Poulose suzuki.poulose@arm.com Link: https://lore.kernel.org/r/20220708231520.3958391-1-ndesaulniers@google.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hwtracing/coresight/coresight-etm4x.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/hwtracing/coresight/coresight-etm4x.h b/drivers/hwtracing/coresight/coresight-etm4x.h index e5b79bdb9851..794b29639035 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x.h +++ b/drivers/hwtracing/coresight/coresight-etm4x.h @@ -7,6 +7,7 @@ #define _CORESIGHT_CORESIGHT_ETM_H
#include <asm/local.h> +#include <linux/const.h> #include <linux/spinlock.h> #include <linux/types.h> #include "coresight-priv.h" @@ -417,7 +418,7 @@ ({ \ u64 __val; \ \ - if (__builtin_constant_p((offset))) \ + if (__is_constexpr((offset))) \ __val = read_etm4x_sysreg_const_offset((offset)); \ else \ __val = etm4x_sysreg_read((offset), true, (_64bit)); \
From: Ofir Bitton obitton@habana.ai
[ Upstream commit 01622098aeb05a5efbb727199bbc2a4653393255 ]
When validating NIC queues, queue offset calculation must be performed only for NIC queues.
Signed-off-by: Ofir Bitton obitton@habana.ai Reviewed-by: Oded Gabbay ogabbay@kernel.org Signed-off-by: Oded Gabbay ogabbay@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/misc/habanalabs/gaudi/gaudi.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-)
diff --git a/drivers/misc/habanalabs/gaudi/gaudi.c b/drivers/misc/habanalabs/gaudi/gaudi.c index 14da87b38e83..801acab048eb 100644 --- a/drivers/misc/habanalabs/gaudi/gaudi.c +++ b/drivers/misc/habanalabs/gaudi/gaudi.c @@ -5744,15 +5744,17 @@ static int gaudi_parse_cb_no_ext_queue(struct hl_device *hdev, { struct asic_fixed_properties *asic_prop = &hdev->asic_prop; struct gaudi_device *gaudi = hdev->asic_specific; - u32 nic_mask_q_id = 1 << (HW_CAP_NIC_SHIFT + - ((parser->hw_queue_id - GAUDI_QUEUE_ID_NIC_0_0) >> 2)); + u32 nic_queue_offset, nic_mask_q_id;
if ((parser->hw_queue_id >= GAUDI_QUEUE_ID_NIC_0_0) && - (parser->hw_queue_id <= GAUDI_QUEUE_ID_NIC_9_3) && - (!(gaudi->hw_cap_initialized & nic_mask_q_id))) { - dev_err(hdev->dev, "h/w queue %d is disabled\n", - parser->hw_queue_id); - return -EINVAL; + (parser->hw_queue_id <= GAUDI_QUEUE_ID_NIC_9_3)) { + nic_queue_offset = parser->hw_queue_id - GAUDI_QUEUE_ID_NIC_0_0; + nic_mask_q_id = 1 << (HW_CAP_NIC_SHIFT + (nic_queue_offset >> 2)); + + if (!(gaudi->hw_cap_initialized & nic_mask_q_id)) { + dev_err(hdev->dev, "h/w queue %d is disabled\n", parser->hw_queue_id); + return -EINVAL; + } }
/* For internal queue jobs just check if CB address is valid */
From: Oded Gabbay ogabbay@kernel.org
[ Upstream commit e3f49437a2e0221a387ecd192d742ae1434e1e3a ]
This fixes a sparse warning of "cast truncates bits from constant value"
Signed-off-by: Oded Gabbay ogabbay@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/misc/habanalabs/gaudi/gaudi.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/misc/habanalabs/gaudi/gaudi.c b/drivers/misc/habanalabs/gaudi/gaudi.c index 801acab048eb..8132200dca67 100644 --- a/drivers/misc/habanalabs/gaudi/gaudi.c +++ b/drivers/misc/habanalabs/gaudi/gaudi.c @@ -3318,19 +3318,19 @@ static void gaudi_init_nic_qman(struct hl_device *hdev, u32 nic_offset, u32 nic_qm_err_cfg, irq_handler_offset; u32 q_off;
- mtr_base_en_lo = lower_32_bits(CFG_BASE + + mtr_base_en_lo = lower_32_bits((CFG_BASE & U32_MAX) + mmSYNC_MNGR_E_N_SYNC_MNGR_OBJS_MON_PAY_ADDRL_0); mtr_base_en_hi = upper_32_bits(CFG_BASE + mmSYNC_MNGR_E_N_SYNC_MNGR_OBJS_MON_PAY_ADDRL_0); - so_base_en_lo = lower_32_bits(CFG_BASE + + so_base_en_lo = lower_32_bits((CFG_BASE & U32_MAX) + mmSYNC_MNGR_E_N_SYNC_MNGR_OBJS_SOB_OBJ_0); so_base_en_hi = upper_32_bits(CFG_BASE + mmSYNC_MNGR_E_N_SYNC_MNGR_OBJS_SOB_OBJ_0); - mtr_base_ws_lo = lower_32_bits(CFG_BASE + + mtr_base_ws_lo = lower_32_bits((CFG_BASE & U32_MAX) + mmSYNC_MNGR_W_S_SYNC_MNGR_OBJS_MON_PAY_ADDRL_0); mtr_base_ws_hi = upper_32_bits(CFG_BASE + mmSYNC_MNGR_W_S_SYNC_MNGR_OBJS_MON_PAY_ADDRL_0); - so_base_ws_lo = lower_32_bits(CFG_BASE + + so_base_ws_lo = lower_32_bits((CFG_BASE & U32_MAX) + mmSYNC_MNGR_W_S_SYNC_MNGR_OBJS_SOB_OBJ_0); so_base_ws_hi = upper_32_bits(CFG_BASE + mmSYNC_MNGR_W_S_SYNC_MNGR_OBJS_SOB_OBJ_0);
From: Wolfram Sang wsa+renesas@sang-engineering.com
[ Upstream commit 2e586f8a5b0ed4a525014a692923ac96f6647816 ]
If we reset because of an error, we need to preserve values for the clock frequency. Otherwise, glitches may be seen on the bus.
To achieve that, we introduce a 'preserve' parameter to the reset function and the IP core specific reset callbacks to handle everything accordingly.
Reported-by: Yoshihiro Shimoda yoshihiro.shimoda.uh@renesas.com Signed-off-by: Wolfram Sang wsa+renesas@sang-engineering.com Tested-by: Yoshihiro Shimoda yoshihiro.shimoda.uh@renesas.com Link: https://lore.kernel.org/r/20220625131722.1397-1-wsa@kernel.org Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/mmc/host/renesas_sdhi_core.c | 29 ++++++++++++++-------------- drivers/mmc/host/tmio_mmc.c | 2 +- drivers/mmc/host/tmio_mmc.h | 6 +++++- drivers/mmc/host/tmio_mmc_core.c | 28 +++++++++++++++++++++------ 4 files changed, 42 insertions(+), 23 deletions(-)
diff --git a/drivers/mmc/host/renesas_sdhi_core.c b/drivers/mmc/host/renesas_sdhi_core.c index ae689bf54686..bbbd512785da 100644 --- a/drivers/mmc/host/renesas_sdhi_core.c +++ b/drivers/mmc/host/renesas_sdhi_core.c @@ -51,9 +51,6 @@ #define HOST_MODE_GEN3_32BIT (HOST_MODE_GEN3_WMODE | HOST_MODE_GEN3_BUSWIDTH) #define HOST_MODE_GEN3_64BIT 0
-#define CTL_SDIF_MODE 0xe6 -#define SDIF_MODE_HS400 BIT(0) - #define SDHI_VER_GEN2_SDR50 0x490c #define SDHI_VER_RZ_A1 0x820b /* very old datasheets said 0x490c for SDR104, too. They are wrong! */ @@ -550,23 +547,25 @@ static void renesas_sdhi_scc_reset(struct tmio_mmc_host *host, struct renesas_sd }
/* only populated for TMIO_MMC_MIN_RCAR2 */ -static void renesas_sdhi_reset(struct tmio_mmc_host *host) +static void renesas_sdhi_reset(struct tmio_mmc_host *host, bool preserve) { struct renesas_sdhi *priv = host_to_priv(host); int ret; u16 val;
- if (priv->rstc) { - reset_control_reset(priv->rstc); - /* Unknown why but without polling reset status, it will hang */ - read_poll_timeout(reset_control_status, ret, ret == 0, 1, 100, - false, priv->rstc); - /* At least SDHI_VER_GEN2_SDR50 needs manual release of reset */ - sd_ctrl_write16(host, CTL_RESET_SD, 0x0001); - priv->needs_adjust_hs400 = false; - renesas_sdhi_set_clock(host, host->clk_cache); - } else if (priv->scc_ctl) { - renesas_sdhi_scc_reset(host, priv); + if (!preserve) { + if (priv->rstc) { + reset_control_reset(priv->rstc); + /* Unknown why but without polling reset status, it will hang */ + read_poll_timeout(reset_control_status, ret, ret == 0, 1, 100, + false, priv->rstc); + /* At least SDHI_VER_GEN2_SDR50 needs manual release of reset */ + sd_ctrl_write16(host, CTL_RESET_SD, 0x0001); + priv->needs_adjust_hs400 = false; + renesas_sdhi_set_clock(host, host->clk_cache); + } else if (priv->scc_ctl) { + renesas_sdhi_scc_reset(host, priv); + } }
if (sd_ctrl_read16(host, CTL_VERSION) >= SDHI_VER_GEN3_SD) { diff --git a/drivers/mmc/host/tmio_mmc.c b/drivers/mmc/host/tmio_mmc.c index b55a29c53d9c..53a2ad9a24b8 100644 --- a/drivers/mmc/host/tmio_mmc.c +++ b/drivers/mmc/host/tmio_mmc.c @@ -75,7 +75,7 @@ static void tmio_mmc_set_clock(struct tmio_mmc_host *host, tmio_mmc_clk_start(host); }
-static void tmio_mmc_reset(struct tmio_mmc_host *host) +static void tmio_mmc_reset(struct tmio_mmc_host *host, bool preserve) { sd_ctrl_write16(host, CTL_RESET_SDIO, 0x0000); usleep_range(10000, 11000); diff --git a/drivers/mmc/host/tmio_mmc.h b/drivers/mmc/host/tmio_mmc.h index f936aad945ce..da63193dd45b 100644 --- a/drivers/mmc/host/tmio_mmc.h +++ b/drivers/mmc/host/tmio_mmc.h @@ -42,6 +42,7 @@ #define CTL_DMA_ENABLE 0xd8 #define CTL_RESET_SD 0xe0 #define CTL_VERSION 0xe2 +#define CTL_SDIF_MODE 0xe6 /* only known on R-Car 2+ */
/* Definitions for values the CTL_STOP_INTERNAL_ACTION register can take */ #define TMIO_STOP_STP BIT(0) @@ -98,6 +99,9 @@ /* Definitions for values the CTL_DMA_ENABLE register can take */ #define DMA_ENABLE_DMASDRW BIT(1)
+/* Definitions for values the CTL_SDIF_MODE register can take */ +#define SDIF_MODE_HS400 BIT(0) /* only known on R-Car 2+ */ + /* Define some IRQ masks */ /* This is the mask used at reset by the chip */ #define TMIO_MASK_ALL 0x837f031d @@ -181,7 +185,7 @@ struct tmio_mmc_host { int (*multi_io_quirk)(struct mmc_card *card, unsigned int direction, int blk_size); int (*write16_hook)(struct tmio_mmc_host *host, int addr); - void (*reset)(struct tmio_mmc_host *host); + void (*reset)(struct tmio_mmc_host *host, bool preserve); bool (*check_retune)(struct tmio_mmc_host *host, struct mmc_request *mrq); void (*fixup_request)(struct tmio_mmc_host *host, struct mmc_request *mrq); unsigned int (*get_timeout_cycles)(struct tmio_mmc_host *host); diff --git a/drivers/mmc/host/tmio_mmc_core.c b/drivers/mmc/host/tmio_mmc_core.c index a5850d83908b..437048bb8027 100644 --- a/drivers/mmc/host/tmio_mmc_core.c +++ b/drivers/mmc/host/tmio_mmc_core.c @@ -179,8 +179,17 @@ static void tmio_mmc_set_bus_width(struct tmio_mmc_host *host, sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, reg); }
-static void tmio_mmc_reset(struct tmio_mmc_host *host) +static void tmio_mmc_reset(struct tmio_mmc_host *host, bool preserve) { + u16 card_opt, clk_ctrl, sdif_mode; + + if (preserve) { + card_opt = sd_ctrl_read16(host, CTL_SD_MEM_CARD_OPT); + clk_ctrl = sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL); + if (host->pdata->flags & TMIO_MMC_MIN_RCAR2) + sdif_mode = sd_ctrl_read16(host, CTL_SDIF_MODE); + } + /* FIXME - should we set stop clock reg here */ sd_ctrl_write16(host, CTL_RESET_SD, 0x0000); usleep_range(10000, 11000); @@ -190,7 +199,7 @@ static void tmio_mmc_reset(struct tmio_mmc_host *host) tmio_mmc_abort_dma(host);
if (host->reset) - host->reset(host); + host->reset(host, preserve);
sd_ctrl_write32_as_16_and_16(host, CTL_IRQ_MASK, host->sdcard_irq_mask_all); host->sdcard_irq_mask = host->sdcard_irq_mask_all; @@ -206,6 +215,13 @@ static void tmio_mmc_reset(struct tmio_mmc_host *host) sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0001); }
+ if (preserve) { + sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, card_opt); + sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, clk_ctrl); + if (host->pdata->flags & TMIO_MMC_MIN_RCAR2) + sd_ctrl_write16(host, CTL_SDIF_MODE, sdif_mode); + } + if (host->mmc->card) mmc_retune_needed(host->mmc); } @@ -248,7 +264,7 @@ static void tmio_mmc_reset_work(struct work_struct *work)
spin_unlock_irqrestore(&host->lock, flags);
- tmio_mmc_reset(host); + tmio_mmc_reset(host, true);
/* Ready for new calls */ host->mrq = NULL; @@ -961,7 +977,7 @@ static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) tmio_mmc_power_off(host); /* For R-Car Gen2+, we need to reset SDHI specific SCC */ if (host->pdata->flags & TMIO_MMC_MIN_RCAR2) - tmio_mmc_reset(host); + tmio_mmc_reset(host, false);
host->set_clock(host, 0); break; @@ -1189,7 +1205,7 @@ int tmio_mmc_host_probe(struct tmio_mmc_host *_host) _host->sdcard_irq_mask_all = TMIO_MASK_ALL;
_host->set_clock(_host, 0); - tmio_mmc_reset(_host); + tmio_mmc_reset(_host, false);
spin_lock_init(&_host->lock); mutex_init(&_host->ios_lock); @@ -1285,7 +1301,7 @@ int tmio_mmc_host_runtime_resume(struct device *dev) struct tmio_mmc_host *host = dev_get_drvdata(dev);
tmio_mmc_clk_enable(host); - tmio_mmc_reset(host); + tmio_mmc_reset(host, false);
if (host->clk_cache) host->set_clock(host, host->clk_cache);
From: Andy Shevchenko andriy.shevchenko@linux.intel.com
[ Upstream commit c551bd81d198bf1dcd4398d5454acdc0309dbe77 ]
In some cases we may get a platform device that has ACPI companion which is different to the pin control described in the ACPI tables. This is primarily happens when device is instantiated by board file.
In order to allow this device being enumerated, refactor intel_pinctrl_get_soc_data() to check the matching data instead of ACPI companion.
Reported-by: Henning Schild henning.schild@siemens.com Signed-off-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Tested-by: Henning Schild henning.schild@siemens.com Acked-by: Hans de Goede hdegoede@redhat.com Acked-by: Mika Westerberg mika.westerberg@linux.intel.com Acked-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Lee Jones lee@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pinctrl/intel/pinctrl-intel.c | 14 ++++++-------- 1 file changed, 6 insertions(+), 8 deletions(-)
diff --git a/drivers/pinctrl/intel/pinctrl-intel.c b/drivers/pinctrl/intel/pinctrl-intel.c index 826d494f3cc6..48f55991ae8c 100644 --- a/drivers/pinctrl/intel/pinctrl-intel.c +++ b/drivers/pinctrl/intel/pinctrl-intel.c @@ -1626,16 +1626,14 @@ EXPORT_SYMBOL_GPL(intel_pinctrl_probe_by_uid);
const struct intel_pinctrl_soc_data *intel_pinctrl_get_soc_data(struct platform_device *pdev) { + const struct intel_pinctrl_soc_data * const *table; const struct intel_pinctrl_soc_data *data = NULL; - const struct intel_pinctrl_soc_data **table; - struct acpi_device *adev; - unsigned int i;
- adev = ACPI_COMPANION(&pdev->dev); - if (adev) { - const void *match = device_get_match_data(&pdev->dev); + table = device_get_match_data(&pdev->dev); + if (table) { + struct acpi_device *adev = ACPI_COMPANION(&pdev->dev); + unsigned int i;
- table = (const struct intel_pinctrl_soc_data **)match; for (i = 0; table[i]; i++) { if (!strcmp(adev->pnp.unique_id, table[i]->uid)) { data = table[i]; @@ -1649,7 +1647,7 @@ const struct intel_pinctrl_soc_data *intel_pinctrl_get_soc_data(struct platform_ if (!id) return ERR_PTR(-ENODEV);
- table = (const struct intel_pinctrl_soc_data **)id->driver_data; + table = (const struct intel_pinctrl_soc_data * const *)id->driver_data; data = table[pdev->id]; }
From: Christophe JAILLET christophe.jaillet@wanadoo.fr
[ Upstream commit 3a15b45b5454da862376b5d69a4967f5c6fa1368 ]
A bitmap_zalloc() must be balanced by a corresponding bitmap_free() in the error handling path of afu_allocate_irqs().
Acked-by: Andrew Donnellan ajd@linux.ibm.com Signed-off-by: Christophe JAILLET christophe.jaillet@wanadoo.fr Link: https://lore.kernel.org/r/ce5869418f5838187946eb6b11a52715a93ece3d.165756684... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/misc/cxl/irq.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/misc/cxl/irq.c b/drivers/misc/cxl/irq.c index 4cb829d5d873..2e4dcfebf19a 100644 --- a/drivers/misc/cxl/irq.c +++ b/drivers/misc/cxl/irq.c @@ -349,6 +349,7 @@ int afu_allocate_irqs(struct cxl_context *ctx, u32 count)
out: cxl_ops->release_irq_ranges(&ctx->irqs, ctx->afu->adapter); + bitmap_free(ctx->irq_bitmap); afu_irq_name_free(ctx); return -ENOMEM; }
From: Huacai Chen chenhuacai@loongson.cn
[ Upstream commit 40a6cc141b4b9580de140bcb3e893445708acc5d ]
Guard ARM64-specific quirks with CONFIG_ARM64 to avoid build errors, since mcfg_quirks will be shared by more than one architectures.
Link: https://lore.kernel.org/r/20220714124216.1489304-2-chenhuacai@loongson.cn Signed-off-by: Huacai Chen chenhuacai@loongson.cn Signed-off-by: Bjorn Helgaas bhelgaas@google.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/acpi/pci_mcfg.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/acpi/pci_mcfg.c b/drivers/acpi/pci_mcfg.c index 53cab975f612..63b98eae5e75 100644 --- a/drivers/acpi/pci_mcfg.c +++ b/drivers/acpi/pci_mcfg.c @@ -41,6 +41,8 @@ struct mcfg_fixup { static struct mcfg_fixup mcfg_quirks[] = { /* { OEM_ID, OEM_TABLE_ID, REV, SEGMENT, BUS_RANGE, ops, cfgres }, */
+#ifdef CONFIG_ARM64 + #define AL_ECAM(table_id, rev, seg, ops) \ { "AMAZON", table_id, rev, seg, MCFG_BUS_ANY, ops }
@@ -169,6 +171,7 @@ static struct mcfg_fixup mcfg_quirks[] = { ALTRA_ECAM_QUIRK(1, 13), ALTRA_ECAM_QUIRK(1, 14), ALTRA_ECAM_QUIRK(1, 15), +#endif /* ARM64 */ };
static char mcfg_oem_id[ACPI_OEM_ID_SIZE];
From: "Jason A. Donenfeld" Jason@zx2c4.com
[ Upstream commit dda520d07b95072a0b63f6c52a8eb566d08ea897 ]
QEMU has a -no-reboot option, which halts instead of reboots when the guest asks to reboot. This is invaluable when used with CONFIG_PANIC_TIMEOUT=-1 (and panic_on_warn), because it allows panics and warnings to be caught immediately in CI. Implement this in UML too, by way of a basic setup param.
Signed-off-by: Jason A. Donenfeld Jason@zx2c4.com Signed-off-by: Richard Weinberger richard@nod.at Signed-off-by: Sasha Levin sashal@kernel.org --- arch/um/os-Linux/skas/process.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-)
diff --git a/arch/um/os-Linux/skas/process.c b/arch/um/os-Linux/skas/process.c index 87d3129e7362..0df2ebcc97c0 100644 --- a/arch/um/os-Linux/skas/process.c +++ b/arch/um/os-Linux/skas/process.c @@ -5,6 +5,7 @@ */
#include <stdlib.h> +#include <stdbool.h> #include <unistd.h> #include <sched.h> #include <errno.h> @@ -707,10 +708,24 @@ void halt_skas(void) UML_LONGJMP(&initial_jmpbuf, INIT_JMP_HALT); }
+static bool noreboot; + +static int __init noreboot_cmd_param(char *str, int *add) +{ + noreboot = true; + return 0; +} + +__uml_setup("noreboot", noreboot_cmd_param, +"noreboot\n" +" Rather than rebooting, exit always, akin to QEMU's -no-reboot option.\n" +" This is useful if you're using CONFIG_PANIC_TIMEOUT in order to catch\n" +" crashes in CI\n"); + void reboot_skas(void) { block_signals_trace(); - UML_LONGJMP(&initial_jmpbuf, INIT_JMP_REBOOT); + UML_LONGJMP(&initial_jmpbuf, noreboot ? INIT_JMP_HALT : INIT_JMP_REBOOT); }
void __switch_mm(struct mm_id *mm_idp)
From: Ben Dooks ben.dooks@sifive.com
[ Upstream commit 86cb0defe0e275453bc39e856bb523eb425a6537 ]
During debugging we have seen an issue where axi_chan_dump_lli() is passed a NULL LLI pointer which ends up causing an OOPS due to trying to get fields from it. Simply print NULL LLI and exit to avoid this.
Signed-off-by: Ben Dooks ben.dooks@sifive.com Link: https://lore.kernel.org/r/20220708170153.269991-3-ben.dooks@sifive.com Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c index 35993ab92154..8f765e2d7c72 100644 --- a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c +++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c @@ -944,6 +944,11 @@ static int dw_axi_dma_chan_slave_config(struct dma_chan *dchan, static void axi_chan_dump_lli(struct axi_dma_chan *chan, struct axi_dma_hw_desc *desc) { + if (!desc->lli) { + dev_err(dchan2dev(&chan->vc.chan), "NULL LLI\n"); + return; + } + dev_err(dchan2dev(&chan->vc.chan), "SAR: 0x%llx DAR: 0x%llx LLP: 0x%llx BTS 0x%x CTL: 0x%x:%08x", le64_to_cpu(desc->lli->sar),
From: Ben Dooks ben.dooks@sifive.com
[ Upstream commit 820f5ce999d2f99961e88c16d65cd26764df0590 ]
If the channel has no descriptor and the interrupt is raised then the kernel will OOPS. Check the result of vchan_next_desc() in the handler axi_chan_block_xfer_complete() to avoid the error happening.
Signed-off-by: Ben Dooks ben.dooks@sifive.com Link: https://lore.kernel.org/r/20220708170153.269991-4-ben.dooks@sifive.com Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c index 8f765e2d7c72..48de8d2b32f2 100644 --- a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c +++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c @@ -1016,6 +1016,11 @@ static void axi_chan_block_xfer_complete(struct axi_dma_chan *chan)
/* The completed descriptor currently is in the head of vc list */ vd = vchan_next_desc(&chan->vc); + if (!vd) { + dev_err(chan2dev(chan), "BUG: %s, IRQ with no descriptors\n", + axi_chan_name(chan)); + goto out; + }
if (chan->cyclic) { desc = vd_to_axi_desc(vd); @@ -1045,6 +1050,7 @@ static void axi_chan_block_xfer_complete(struct axi_dma_chan *chan) axi_chan_start_first_queued(chan); }
+out: spin_unlock_irqrestore(&chan->vc.lock, flags); }
From: Bob Pearson rpearsonhpe@gmail.com
[ Upstream commit eff6d998ca297cb0b2e53b032a56cf8e04dd8b17 ]
Limit the maximum number of calls to each tasklet from rxe_do_task() before yielding the cpu. When the limit is reached reschedule the tasklet and exit the calling loop. This patch prevents one tasklet from consuming 100% of a cpu core and causing a deadlock or soft lockup.
Link: https://lore.kernel.org/r/20220630190425.2251-9-rpearsonhpe@gmail.com Signed-off-by: Bob Pearson rpearsonhpe@gmail.com Signed-off-by: Jason Gunthorpe jgg@nvidia.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/infiniband/sw/rxe/rxe_param.h | 6 ++++++ drivers/infiniband/sw/rxe/rxe_task.c | 16 ++++++++++++---- 2 files changed, 18 insertions(+), 4 deletions(-)
diff --git a/drivers/infiniband/sw/rxe/rxe_param.h b/drivers/infiniband/sw/rxe/rxe_param.h index b5a70cbe94aa..872389870106 100644 --- a/drivers/infiniband/sw/rxe/rxe_param.h +++ b/drivers/infiniband/sw/rxe/rxe_param.h @@ -103,6 +103,12 @@ enum rxe_device_param { RXE_INFLIGHT_SKBS_PER_QP_HIGH = 64, RXE_INFLIGHT_SKBS_PER_QP_LOW = 16,
+ /* Max number of interations of each tasklet + * before yielding the cpu to let other + * work make progress + */ + RXE_MAX_ITERATIONS = 1024, + /* Delay before calling arbiter timer */ RXE_NSEC_ARB_TIMER_DELAY = 200,
diff --git a/drivers/infiniband/sw/rxe/rxe_task.c b/drivers/infiniband/sw/rxe/rxe_task.c index 6951fdcb31bf..568cf56c236b 100644 --- a/drivers/infiniband/sw/rxe/rxe_task.c +++ b/drivers/infiniband/sw/rxe/rxe_task.c @@ -8,7 +8,7 @@ #include <linux/interrupt.h> #include <linux/hardirq.h>
-#include "rxe_task.h" +#include "rxe.h"
int __rxe_do_task(struct rxe_task *task)
@@ -34,6 +34,7 @@ void rxe_do_task(struct tasklet_struct *t) int ret; unsigned long flags; struct rxe_task *task = from_tasklet(task, t, tasklet); + unsigned int iterations = RXE_MAX_ITERATIONS;
spin_lock_irqsave(&task->state_lock, flags); switch (task->state) { @@ -62,13 +63,20 @@ void rxe_do_task(struct tasklet_struct *t) spin_lock_irqsave(&task->state_lock, flags); switch (task->state) { case TASK_STATE_BUSY: - if (ret) + if (ret) { task->state = TASK_STATE_START; - else + } else if (iterations--) { cont = 1; + } else { + /* reschedule the tasklet and exit + * the loop to give up the cpu + */ + tasklet_schedule(&task->tasklet); + task->state = TASK_STATE_START; + } break;
- /* soneone tried to run the task since the last time we called + /* someone tried to run the task since the last time we called * func, so we will call one more time regardless of the * return value */
From: Liao Chang liaochang1@huawei.com
[ Upstream commit a2310c74d418deca0f1d749c45f1f43162510f51 ]
On kprobe registration kernel allocate one insn_slot for new kprobe, but it forget to reclaim the insn_slot on unregistration, leading to a potential leakage.
Reported-by: Chen Guokai chenguokai17@mails.ucas.ac.cn Reviewed-by: Masami Hiramatsu (Google) mhiramat@kernel.org Signed-off-by: Liao Chang liaochang1@huawei.com Signed-off-by: Guo Ren guoren@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/csky/kernel/probes/kprobes.c | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/arch/csky/kernel/probes/kprobes.c b/arch/csky/kernel/probes/kprobes.c index 4045894d9280..584ed9f36290 100644 --- a/arch/csky/kernel/probes/kprobes.c +++ b/arch/csky/kernel/probes/kprobes.c @@ -124,6 +124,10 @@ void __kprobes arch_disarm_kprobe(struct kprobe *p)
void __kprobes arch_remove_kprobe(struct kprobe *p) { + if (p->ainsn.api.insn) { + free_insn_slot(p->ainsn.api.insn, 0); + p->ainsn.api.insn = NULL; + } }
static void __kprobes save_previous_kprobe(struct kprobe_ctlblk *kcb)
From: "Steven Rostedt (Google)" rostedt@goodmis.org
[ Upstream commit f5eab65ff2b76449286d18efc7fee3e0b72f7d9b ]
A new feature is added where kprobes (and other probes) do not need to explicitly state the event name when creating a probe. The event name will come from what is being attached.
That is:
# echo 'p:foo/ vfs_read' > kprobe_events
Will no longer error, but instead create an event:
# cat kprobe_events p:foo/p_vfs_read_0 vfs_read
This should not be tested as an error case anymore. Remove it from the selftest as now this feature "breaks" the selftest as it no longer fails as expected.
Link: https://lore.kernel.org/all/1656296348-16111-1-git-send-email-quic_linyyuan@... Link: https://lkml.kernel.org/r/20220712161707.6dc08a14@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) rostedt@goodmis.org Signed-off-by: Sasha Levin sashal@kernel.org --- .../selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc | 1 - 1 file changed, 1 deletion(-)
diff --git a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc index fa928b431555..7c02509c71d0 100644 --- a/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc +++ b/tools/testing/selftests/ftrace/test.d/kprobe/kprobe_syntax_errors.tc @@ -21,7 +21,6 @@ check_error 'p:^/bar vfs_read' # NO_GROUP_NAME check_error 'p:^12345678901234567890123456789012345678901234567890123456789012345/bar vfs_read' # GROUP_TOO_LONG
check_error 'p:^foo.1/bar vfs_read' # BAD_GROUP_NAME -check_error 'p:foo/^ vfs_read' # NO_EVENT_NAME check_error 'p:foo/^12345678901234567890123456789012345678901234567890123456789012345 vfs_read' # EVENT_TOO_LONG check_error 'p:foo/^bar.1 vfs_read' # BAD_EVENT_NAME
From: Uwe Kleine-König u.kleine-koenig@pengutronix.de
[ Upstream commit 1e42f82cbec7b2cc4873751e7791e6611901c5fc ]
It's not allowed to quit remove early without cleaning up completely. Otherwise this results in resource leaks that probably yield graver problems later. Here for example some tasklets might survive the lifetime of the sprd-dma device and access sdev which is freed after .remove() returns.
As none of the device freeing requires an active device, just ignore the return value of pm_runtime_get_sync().
Signed-off-by: Uwe Kleine-König u.kleine-koenig@pengutronix.de Reviewed-by: Baolin Wang baolin.wang7@gmail.com Link: https://lore.kernel.org/r/20220721204054.323602-1-u.kleine-koenig@pengutroni... Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/dma/sprd-dma.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)
diff --git a/drivers/dma/sprd-dma.c b/drivers/dma/sprd-dma.c index 4357d2395e6b..60115d8d4083 100644 --- a/drivers/dma/sprd-dma.c +++ b/drivers/dma/sprd-dma.c @@ -1236,11 +1236,8 @@ static int sprd_dma_remove(struct platform_device *pdev) { struct sprd_dma_dev *sdev = platform_get_drvdata(pdev); struct sprd_dma_chn *c, *cn; - int ret;
- ret = pm_runtime_get_sync(&pdev->dev); - if (ret < 0) - return ret; + pm_runtime_get_sync(&pdev->dev);
/* explicitly free the irq */ if (sdev->irq > 0)
From: Lecopzer Chen lecopzer.chen@mediatek.com
[ Upstream commit 565cbaad83d83e288927b96565211109bc984007 ]
Simply make shadow of vmalloc area mapped on demand.
Since the virtual address of vmalloc for Arm is also between MODULE_VADDR and 0x100000000 (ZONE_HIGHMEM), which means the shadow address has already included between KASAN_SHADOW_START and KASAN_SHADOW_END. Thus we need to change nothing for memory map of Arm.
This can fix ARM_MODULE_PLTS with KASan, support KASan for higmem and support CONFIG_VMAP_STACK with KASan.
Signed-off-by: Lecopzer Chen lecopzer.chen@mediatek.com Tested-by: Linus Walleij linus.walleij@linaro.org Reviewed-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Russell King (Oracle) rmk+kernel@armlinux.org.uk Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/Kconfig | 1 + arch/arm/mm/kasan_init.c | 6 +++++- 2 files changed, 6 insertions(+), 1 deletion(-)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 4ebd512043be..44f328fa5996 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -71,6 +71,7 @@ config ARM select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL && !CPU_ENDIAN_BE32 && MMU select HAVE_ARCH_KGDB if !CPU_ENDIAN_BE32 && MMU select HAVE_ARCH_KASAN if MMU && !XIP_KERNEL + select HAVE_ARCH_KASAN_VMALLOC if HAVE_ARCH_KASAN select HAVE_ARCH_MMAP_RND_BITS if MMU select HAVE_ARCH_PFN_VALID select HAVE_ARCH_SECCOMP diff --git a/arch/arm/mm/kasan_init.c b/arch/arm/mm/kasan_init.c index 4b1619584b23..040346cc4a3a 100644 --- a/arch/arm/mm/kasan_init.c +++ b/arch/arm/mm/kasan_init.c @@ -236,7 +236,11 @@ void __init kasan_init(void)
clear_pgds(KASAN_SHADOW_START, KASAN_SHADOW_END);
- kasan_populate_early_shadow(kasan_mem_to_shadow((void *)VMALLOC_START), + if (!IS_ENABLED(CONFIG_KASAN_VMALLOC)) + kasan_populate_early_shadow(kasan_mem_to_shadow((void *)VMALLOC_START), + kasan_mem_to_shadow((void *)VMALLOC_END)); + + kasan_populate_early_shadow(kasan_mem_to_shadow((void *)VMALLOC_END), kasan_mem_to_shadow((void *)-1UL) + 1);
for_each_mem_range(i, &pa_start, &pa_end) {
From: Lecopzer Chen lecopzer.chen@mediatek.com
[ Upstream commit 8fa7ea40bf56945c3ff5af00c0dca1fd9e26f129 ]
When we run out of module space address with ko insertion, and with MODULE_PLTS, module would turn to try to find memory from VMALLOC address space.
Unfortunately, with KASAN enabled, VMALLOC doesn't work without KASAN_VMALLOC, thus select KASAN_VMALLOC by default.
8<--- cut here --- Unable to handle kernel paging request at virtual address bd300860 [bd300860] *pgd=41cf1811, *pte=41cf26df, *ppte=41cf265f Internal error: Oops: 80f [#1] PREEMPT SMP ARM Modules linked in: hello(O+) CPU: 0 PID: 89 Comm: insmod Tainted: G O 5.16.0-rc6+ #19 Hardware name: Generic DT based system PC is at mmioset+0x30/0xa8 LR is at 0x0 pc : [<c077ed30>] lr : [<00000000>] psr: 20000013 sp : c451fc18 ip : bd300860 fp : c451fc2c r10: f18042cc r9 : f18042d0 r8 : 00000000 r7 : 00000001 r6 : 00000003 r5 : 01312d00 r4 : f1804300 r3 : 00000000 r2 : 00262560 r1 : 00000000 r0 : bd300860 Flags: nzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 43e9406a DAC: 00000051 Register r0 information: non-paged memory Register r1 information: NULL pointer Register r2 information: non-paged memory Register r3 information: NULL pointer Register r4 information: 4887-page vmalloc region starting at 0xf1802000 allocated at load_module+0x14f4/0x32a8 Register r5 information: non-paged memory Register r6 information: non-paged memory Register r7 information: non-paged memory Register r8 information: NULL pointer Register r9 information: 4887-page vmalloc region starting at 0xf1802000 allocated at load_module+0x14f4/0x32a8 Register r10 information: 4887-page vmalloc region starting at 0xf1802000 allocated at load_module+0x14f4/0x32a8 Register r11 information: non-slab/vmalloc memory Register r12 information: non-paged memory Process insmod (pid: 89, stack limit = 0xc451c000) Stack: (0xc451fc18 to 0xc4520000) fc00: f18041f0 c04803a4 fc20: c451fc44 c451fc30 c048053c c0480358 f1804030 01312cff c451fc64 c451fc48 fc40: c047f330 c0480500 f18040c0 c1b52ccc 00000001 c5be7700 c451fc74 c451fc68 fc60: f1802098 c047f300 c451fcb4 c451fc78 c026106c f180208c c4880004 00000000 fc80: c451fcb4 bf001000 c044ff48 c451fec0 f18040c0 00000000 c1b54cc4 00000000 fca0: c451fdf0 f1804268 c451fe64 c451fcb8 c0264e88 c0260d48 ffff8000 00007fff fcc0: f18040c0 c025cd00 c451fd14 00000003 0157f008 f1804258 f180425c f1804174 fce0: f1804154 f180424c f18041f0 f180414c f1804178 f18041c0 bf0025d4 188a3fa8 fd00: 0000009e f1804170 f2b18000 c451ff10 c0d92e40 f180416c c451feec 00000001 fd20: 00000000 c451fec8 c451fe20 c451fed0 f18040cc 00000000 f17ea000 c451fdc0 fd40: 41b58ab3 c1387729 c0261c28 c047fb5c c451fe2c c451fd60 c0525308 c048033c fd60: 188a3fb4 c3ccb090 c451fe00 c3ccb080 00000000 00000000 00016920 00000000 fd80: c02d0388 c047f55c c02d0388 00000000 c451fddc c451fda0 c02d0388 00000000 fda0: 41b58ab3 c13a72d0 c0524ff0 c1705f48 c451fdfc c451fdc0 c02d0388 c047f55c fdc0: 00016920 00000000 00000003 c1bb2384 c451fdfc c3ccb080 c1bb2384 00000000 fde0: 00000000 00000000 00000000 00000000 c451fe1c c451fe00 c04e9d70 c1705f48 fe00: c1b54cc4 c1bbc71c c3ccb080 00000000 c3ccb080 00000000 00000003 c451fec0 fe20: c451fe64 c451fe30 c0525918 c0524ffc c451feb0 c1705f48 00000000 c1b54cc4 fe40: b78a3fd0 c451ff60 00000000 0157f008 00000003 c451fec0 c451ffa4 c451fe68 fe60: c0265480 c0261c34 c451feb0 7fffffff 00000000 00000002 00000000 c4880000 fe80: 41b58ab3 c138777b c02652cc c04803ec 000a0000 c451ff00 ffffff9c b6ac9f60 fea0: c451fed4 c1705f48 c04a4a90 b78a3fdc f17ea000 ffffff9c b6ac9f60 c0100244 fec0: f17ea21a f17ea300 f17ea000 00016920 f1800240 f18000ac f17fb7dc 01316000 fee0: 013161b0 00002590 01316250 00000000 00000000 00000000 00002580 00000029 ff00: 0000002a 00000013 00000000 0000000c 00000000 00000000 0157f004 c451ffb0 ff20: c1719be0 aed6f410 c451ff74 c451ff38 c0c4103c c0c407d0 c451ff84 c451ff48 ff40: 00000805 c02c8658 c1604230 c1719c30 00000805 0157f004 00000005 c451ffb0 ff60: c1719be0 aed6f410 c451ffac c451ff78 c0122130 c1705f48 c451ffac 0157f008 ff80: 00000006 0000005f 0000017b c0100244 c4880000 0000017b 00000000 c451ffa8 ffa0: c0100060 c02652d8 0157f008 00000006 00000003 0157f008 00000000 b6ac9f60 ffc0: 0157f008 00000006 0000005f 0000017b 00000000 00000000 aed85f74 00000000 ffe0: b6ac9cd8 b6ac9cc8 00030200 aecf2d60 a0000010 00000003 00000000 00000000 Backtrace: [<c048034c>] (kasan_poison) from [<c048053c>] (kasan_unpoison+0x48/0x5c) [<c04804f4>] (kasan_unpoison) from [<c047f330>] (__asan_register_globals+0x3c/0x64) r5:01312cff r4:f1804030 [<c047f2f4>] (__asan_register_globals) from [<f1802098>] (_sub_I_65535_1+0x18/0xf80 [hello]) r7:c5be7700 r6:00000001 r5:c1b52ccc r4:f18040c0 [<f1802080>] (_sub_I_65535_1 [hello]) from [<c026106c>] (do_init_module+0x330/0x72c) [<c0260d3c>] (do_init_module) from [<c0264e88>] (load_module+0x3260/0x32a8) r10:f1804268 r9:c451fdf0 r8:00000000 r7:c1b54cc4 r6:00000000 r5:f18040c0 r4:c451fec0 [<c0261c28>] (load_module) from [<c0265480>] (sys_finit_module+0x1b4/0x1e8) r10:c451fec0 r9:00000003 r8:0157f008 r7:00000000 r6:c451ff60 r5:b78a3fd0 r4:c1b54cc4 [<c02652cc>] (sys_finit_module) from [<c0100060>] (ret_fast_syscall+0x0/0x1c) Exception stack(0xc451ffa8 to 0xc451fff0) ffa0: 0157f008 00000006 00000003 0157f008 00000000 b6ac9f60 ffc0: 0157f008 00000006 0000005f 0000017b 00000000 00000000 aed85f74 00000000 ffe0: b6ac9cd8 b6ac9cc8 00030200 aecf2d60 r10:0000017b r9:c4880000 r8:c0100244 r7:0000017b r6:0000005f r5:00000006 r4:0157f008 Code: e92d4100 e1a08001 e1a0e003 e2522040 (a8ac410a) ---[ end trace df6e12843197b6f5 ]---
Signed-off-by: Lecopzer Chen lecopzer.chen@mediatek.com Tested-by: Linus Walleij linus.walleij@linaro.org Reviewed-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Russell King (Oracle) rmk+kernel@armlinux.org.uk Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/Kconfig | 1 + 1 file changed, 1 insertion(+)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 44f328fa5996..700612e8cc38 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1507,6 +1507,7 @@ config ARCH_WANT_GENERAL_HUGETLB config ARM_MODULE_PLTS bool "Use PLTs to allow module memory to spill over into vmalloc area" depends on MODULES + select KASAN_VMALLOC if KASAN default y help Allocate PLTs when loading modules so that jumps and calls whose
From: Stafford Horne shorne@gmail.com
[ Upstream commit 52e0ea900202d23843daee8f7089817e81dd3dd7 ]
When OpenRISC enables PCI it allows for more drivers to be compiled resulting in exposing the following with -Werror.
drivers/video/fbdev/riva/fbdev.c: In function 'rivafb_probe': drivers/video/fbdev/riva/fbdev.c:2062:42: error: passing argument 1 of 'iounmap' discards 'volatile' qualifier from pointer target type
drivers/video/fbdev/nvidia/nvidia.c: In function 'nvidiafb_probe': drivers/video/fbdev/nvidia/nvidia.c:1414:20: error: passing argument 1 of 'iounmap' discards 'volatile' qualifier from pointer target type
drivers/scsi/aic7xxx/aic7xxx_osm.c: In function 'ahc_platform_free': drivers/scsi/aic7xxx/aic7xxx_osm.c:1231:41: error: passing argument 1 of 'iounmap' discards 'volatile' qualifier from pointer target type
Most architectures define the iounmap argument to be volatile. To fix this issue we do the same for OpenRISC. This patch must go before PCI is enabled on OpenRISC to avoid any compile failures.
Link: https://lore.kernel.org/lkml/20220729033728.GA2195022@roeck-us.net/ Reported-by: Guenter Roeck linux@roeck-us.net Tested-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Stafford Horne shorne@gmail.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/openrisc/include/asm/io.h | 2 +- arch/openrisc/mm/ioremap.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/openrisc/include/asm/io.h b/arch/openrisc/include/asm/io.h index c298061c70a7..8aa3e78181e9 100644 --- a/arch/openrisc/include/asm/io.h +++ b/arch/openrisc/include/asm/io.h @@ -31,7 +31,7 @@ void __iomem *ioremap(phys_addr_t offset, unsigned long size);
#define iounmap iounmap -extern void iounmap(void __iomem *addr); +extern void iounmap(volatile void __iomem *addr);
#include <asm-generic/io.h>
diff --git a/arch/openrisc/mm/ioremap.c b/arch/openrisc/mm/ioremap.c index daae13a76743..8ec0dafecf25 100644 --- a/arch/openrisc/mm/ioremap.c +++ b/arch/openrisc/mm/ioremap.c @@ -77,7 +77,7 @@ void __iomem *__ref ioremap(phys_addr_t addr, unsigned long size) } EXPORT_SYMBOL(ioremap);
-void iounmap(void __iomem *addr) +void iounmap(volatile void __iomem *addr) { /* If the page is from the fixmap pool then we just clear out * the fixmap mapping.
From: Marek Szyprowski m.szyprowski@samsung.com
[ Upstream commit f2812227bb07e2eaee74253f11cea1576945df31 ]
The exynos-pcie driver called phy_power_on() before phy_init() for some historical reasons. However the generic PHY framework assumes that the proper sequence is to call phy_init() first, then phy_power_on(). The operations done by both functions should be considered as one action and as such they are called by the exynos-pcie driver (without doing anything between them). The initialization is just a sequence of register writes, which cannot be altered without breaking the hardware operation.
To match the generic PHY framework requirement, simply move all register writes to the phy_init()/phy_exit() and drop power_on()/power_off() callbacks. This way the driver will also work with the old (incorrect) PHY initialization call sequence.
Link: https://lore.kernel.org/r/20220628220409.26545-1-m.szyprowski@samsung.com Reported-by: Bjorn Helgaas helgaas@kernel.org Signed-off-by: Marek Szyprowski m.szyprowski@samsung.com Signed-off-by: Bjorn Helgaas bhelgaas@google.com Reviewed-by: Chanho Park chanho61.park@samsung.com Acked-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org Acked-By: Vinod Koul vkoul@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/phy/samsung/phy-exynos-pcie.c | 25 +++++++++---------------- 1 file changed, 9 insertions(+), 16 deletions(-)
diff --git a/drivers/phy/samsung/phy-exynos-pcie.c b/drivers/phy/samsung/phy-exynos-pcie.c index 578cfe07d07a..53c9230c2907 100644 --- a/drivers/phy/samsung/phy-exynos-pcie.c +++ b/drivers/phy/samsung/phy-exynos-pcie.c @@ -51,6 +51,13 @@ static int exynos5433_pcie_phy_init(struct phy *phy) { struct exynos_pcie_phy *ep = phy_get_drvdata(phy);
+ regmap_update_bits(ep->pmureg, EXYNOS5433_PMU_PCIE_PHY_OFFSET, + BIT(0), 1); + regmap_update_bits(ep->fsysreg, PCIE_EXYNOS5433_PHY_GLOBAL_RESET, + PCIE_APP_REQ_EXIT_L1_MODE, 0); + regmap_update_bits(ep->fsysreg, PCIE_EXYNOS5433_PHY_L1SUB_CM_CON, + PCIE_REFCLK_GATING_EN, 0); + regmap_update_bits(ep->fsysreg, PCIE_EXYNOS5433_PHY_COMMON_RESET, PCIE_PHY_RESET, 1); regmap_update_bits(ep->fsysreg, PCIE_EXYNOS5433_PHY_MAC_RESET, @@ -109,20 +116,7 @@ static int exynos5433_pcie_phy_init(struct phy *phy) return 0; }
-static int exynos5433_pcie_phy_power_on(struct phy *phy) -{ - struct exynos_pcie_phy *ep = phy_get_drvdata(phy); - - regmap_update_bits(ep->pmureg, EXYNOS5433_PMU_PCIE_PHY_OFFSET, - BIT(0), 1); - regmap_update_bits(ep->fsysreg, PCIE_EXYNOS5433_PHY_GLOBAL_RESET, - PCIE_APP_REQ_EXIT_L1_MODE, 0); - regmap_update_bits(ep->fsysreg, PCIE_EXYNOS5433_PHY_L1SUB_CM_CON, - PCIE_REFCLK_GATING_EN, 0); - return 0; -} - -static int exynos5433_pcie_phy_power_off(struct phy *phy) +static int exynos5433_pcie_phy_exit(struct phy *phy) { struct exynos_pcie_phy *ep = phy_get_drvdata(phy);
@@ -135,8 +129,7 @@ static int exynos5433_pcie_phy_power_off(struct phy *phy)
static const struct phy_ops exynos5433_phy_ops = { .init = exynos5433_pcie_phy_init, - .power_on = exynos5433_pcie_phy_power_on, - .power_off = exynos5433_pcie_phy_power_off, + .exit = exynos5433_pcie_phy_exit, .owner = THIS_MODULE, };
From: Logan Gunthorpe logang@deltatee.com
[ Upstream commit 9973f0fa7d20269fe6fefe6333997fb5914449c1 ]
The mdadm test 07layouts randomly produces a kernel hung task deadlock. The deadlock is caused by the suspend_lo/suspend_hi files being set by the mdadm background process during reshape and not being cleared because the process hangs. (Leaving aside the issue of the fragility of freezing kernel tasks by buggy userspace processes...)
When the background mdadm process hangs it, is waiting (without a timeout) on a change to the sync_completed file signalling that the reshape has completed. The process is woken up a couple times when the reshape finishes but it is woken up before MD_RECOVERY_RUNNING is cleared so sync_completed_show() reports 0 instead of "none".
To fix this, notify the sysfs file in md_reap_sync_thread() after MD_RECOVERY_RUNNING has been cleared. This wakes up mdadm and causes it to continue and write to suspend_lo/suspend_hi to allow IO to continue.
Signed-off-by: Logan Gunthorpe logang@deltatee.com Reviewed-by: Christoph Hellwig hch@lst.de Signed-off-by: Song Liu song@kernel.org Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/md/md.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/md/md.c b/drivers/md/md.c index bf1c5c0e472e..4be9b23019c7 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -9467,6 +9467,7 @@ void md_reap_sync_thread(struct mddev *mddev) wake_up(&resync_wait); /* flag recovery needed just to double check */ set_bit(MD_RECOVERY_NEEDED, &mddev->recovery); + sysfs_notify_dirent_safe(mddev->sysfs_completed); sysfs_notify_dirent_safe(mddev->sysfs_action); md_new_event(mddev); if (mddev->event_work.func)
From: Sagi Grimberg sagi@grimberg.me
[ Upstream commit 533d2e8b4d5e4c89772a0adce913525fb86cbbee ]
We probably need nvmet_tcp_wq to have MEM_RECLAIM as we are sending/receiving for the socket from works on this workqueue. Also this eliminates lockdep complaints: -- [ 6174.010200] workqueue: WQ_MEM_RECLAIM nvmet-wq:nvmet_tcp_release_queue_work [nvmet_tcp] is flushing !WQ_MEM_RECLAIM nvmet_tcp_wq:nvmet_tcp_io_work [nvmet_tcp] [ 6174.010216] WARNING: CPU: 20 PID: 14456 at kernel/workqueue.c:2628 check_flush_dependency+0x110/0x14c
Reported-by: Yi Zhang yi.zhang@redhat.com Signed-off-by: Sagi Grimberg sagi@grimberg.me Signed-off-by: Christoph Hellwig hch@lst.de Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/target/tcp.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/nvme/target/tcp.c b/drivers/nvme/target/tcp.c index f592e5f7f5f3..889c5433c94d 100644 --- a/drivers/nvme/target/tcp.c +++ b/drivers/nvme/target/tcp.c @@ -1834,7 +1834,8 @@ static int __init nvmet_tcp_init(void) { int ret;
- nvmet_tcp_wq = alloc_workqueue("nvmet_tcp_wq", WQ_HIGHPRI, 0); + nvmet_tcp_wq = alloc_workqueue("nvmet_tcp_wq", + WQ_MEM_RECLAIM | WQ_HIGHPRI, 0); if (!nvmet_tcp_wq) return -ENOMEM;
From: Wentao_Liang Wentao_Liang_g@163.com
[ Upstream commit 104212471b1c1817b311771d817fb692af983173 ]
In line 2884, "raid5_release_stripe(sh);" drops the reference to sh and may cause sh to be released. However, sh is subsequently used in lines 2886 "if (sh->batch_head && sh != sh->batch_head)". This may result in an use-after-free bug.
It can be fixed by moving "raid5_release_stripe(sh);" to the bottom of the function.
Signed-off-by: Wentao_Liang Wentao_Liang_g@163.com Signed-off-by: Song Liu song@kernel.org Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/md/raid5.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index b58984ddca13..19e497a7e747 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -2864,10 +2864,10 @@ static void raid5_end_write_request(struct bio *bi) if (!test_and_clear_bit(R5_DOUBLE_LOCKED, &sh->dev[i].flags)) clear_bit(R5_LOCKED, &sh->dev[i].flags); set_bit(STRIPE_HANDLE, &sh->state); - raid5_release_stripe(sh);
if (sh->batch_head && sh != sh->batch_head) raid5_release_stripe(sh->batch_head); + raid5_release_stripe(sh); }
static void raid5_error(struct mddev *mddev, struct md_rdev *rdev)
From: Ye Bin yebin10@huawei.com
[ Upstream commit b24e77ef1c6d4dbf42749ad4903c97539cc9755a ]
Now if check directoy entry is corrupted, ext4_empty_dir may return true then directory will be removed when file system mounted with "errors=continue". In order not to make things worse just return false when directory is corrupted.
Signed-off-by: Ye Bin yebin10@huawei.com Reviewed-by: Jan Kara jack@suse.cz Link: https://lore.kernel.org/r/20220622090223.682234-1-yebin10@huawei.com Signed-off-by: Theodore Ts'o tytso@mit.edu Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ext4/namei.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-)
diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c index 871eebf12bf4..6dc436d70c97 100644 --- a/fs/ext4/namei.c +++ b/fs/ext4/namei.c @@ -3067,11 +3067,8 @@ bool ext4_empty_dir(struct inode *inode) de = (struct ext4_dir_entry_2 *) (bh->b_data + (offset & (sb->s_blocksize - 1))); if (ext4_check_dir_entry(inode, NULL, de, bh, - bh->b_data, bh->b_size, offset)) { - offset = (offset | (sb->s_blocksize - 1)) + 1; - continue; - } - if (le32_to_cpu(de->inode)) { + bh->b_data, bh->b_size, offset) || + le32_to_cpu(de->inode)) { brelse(bh); return false; }
From: "Kiselev, Oleg" okiselev@amazon.com
[ Upstream commit 69cb8e9d8cd97cdf5e293b26d70a9dee3e35e6bd ]
This patch avoids an attempt to resize the filesystem to an unaligned cluster boundary. An online resize to a size that is not integral to cluster size results in the last iteration attempting to grow the fs by a negative amount, which trips a BUG_ON and leaves the fs with a corrupted in-memory superblock.
Signed-off-by: Oleg Kiselev okiselev@amazon.com Link: https://lore.kernel.org/r/0E92A0AB-4F16-4F1A-94B7-702CC6504FDE@amazon.com Signed-off-by: Theodore Ts'o tytso@mit.edu Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ext4/resize.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/fs/ext4/resize.c b/fs/ext4/resize.c index 56c9ef0687fc..90e1442f0a63 100644 --- a/fs/ext4/resize.c +++ b/fs/ext4/resize.c @@ -1976,6 +1976,16 @@ int ext4_resize_fs(struct super_block *sb, ext4_fsblk_t n_blocks_count) } brelse(bh);
+ /* + * For bigalloc, trim the requested size to the nearest cluster + * boundary to avoid creating an unusable filesystem. We do this + * silently, instead of returning an error, to avoid breaking + * callers that blindly resize the filesystem to the full size of + * the underlying block device. + */ + if (ext4_has_feature_bigalloc(sb)) + n_blocks_count &= ~((1 << EXT4_CLUSTER_BITS(sb)) - 1); + retry: o_blocks_count = ext4_blocks_count(es);
linux-stable-mirror@lists.linaro.org
-
Sasha Levin