On Tue, Apr 15, 2025 at 8:33 AM Wentao Liang vulab@iscas.ac.cn wrote:

In vegam_populate_smc_boot_level(), the return value of phm_find_boot_level() is 0 or negative error code and the "if (result)" branch statement will never run into the true branch. Besides, this will skip setting the voltages later below. Returning early may break working devices.

Add an error handling to phm_find_boot_level() to reset the boot level when the function fails. A proper implementation can be found in tonga_populate_smc_boot_level().

Fixes: 4a1132782200 ("drm/amd/powerplay: return errno code to caller when error occur") Cc: stable@vger.kernel.org # v5.6+

I don't know that this is a fix per se so I don't think stable is appropriate.

This is probably ok, but TBH, I don't really remember how the pptables were set up on these old chips and whether changing the current behavior would actually fix or break anything. I'd be more inclined to just leave the logic as is lest something break.

Signed-off-by: Wentao Liang vulab@iscas.ac.cn

.../drm/amd/pm/powerplay/smumgr/vegam_smumgr.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/gpu/drm/amd/pm/powerplay/smumgr/vegam_smumgr.c b/drivers/gpu/drm/amd/pm/powerplay/smumgr/vegam_smumgr.c index 34c9f59b889a..c68dd12b858a 100644 --- a/drivers/gpu/drm/amd/pm/powerplay/smumgr/vegam_smumgr.c +++ b/drivers/gpu/drm/amd/pm/powerplay/smumgr/vegam_smumgr.c @@ -1374,15 +1374,20 @@ static int vegam_populate_smc_boot_level(struct pp_hwmgr *hwmgr, result = phm_find_boot_level(&(data->dpm_table.sclk_table), data->vbios_boot_state.sclk_bootup_value, (uint32_t *)&(table->GraphicsBootLevel));

•   if (result)
  

•           return result;
  

•   if (result != 0) {
  

•           table->GraphicsBootLevel = 0;
  

•           pr_err("VBIOS did not find boot engine clock value in dependency table. Using Graphics DPM level 0!\n");
  

•           result = 0;
  

•   }
  
    result = phm_find_boot_level(&(data->dpm_table.mclk_table),
                    data->vbios_boot_state.mclk_bootup_value,
                    (uint32_t *)&(table->MemoryBootLevel));
  

•   if (result)
  

•           return result;
  

•   if (result != 0) {
  

•           table->MemoryBootLevel = 0;
  

•           pr_err("VBIOS did not find boot engine clock value in dependency table. Using Memory DPM level 0!\n");
  

•           result = 0;
  

•   }
  
    table->BootVddc  = data->vbios_boot_state.vddc_bootup_value *
                    VOLTAGE_SCALE;
  

-- 2.42.0.windows.2