[PATCH AUTOSEL 4.19 001/123] ARM: OMAP2+: prm44xx: Fix section annotation on omap44xx_prm_enable_io_wakeup
From: Nathan Chancellor natechancellor@gmail.com
[ Upstream commit eef3dc34a1e0b01d53328b88c25237bcc7323777 ]
When building the kernel with Clang, the following section mismatch warning appears:
WARNING: vmlinux.o(.text+0x38b3c): Section mismatch in reference from the function omap44xx_prm_late_init() to the function .init.text:omap44xx_prm_enable_io_wakeup() The function omap44xx_prm_late_init() references the function __init omap44xx_prm_enable_io_wakeup(). This is often because omap44xx_prm_late_init lacks a __init annotation or the annotation of omap44xx_prm_enable_io_wakeup is wrong.
Remove the __init annotation from omap44xx_prm_enable_io_wakeup so there is no more mismatch.
Signed-off-by: Nathan Chancellor natechancellor@gmail.com Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/mach-omap2/prm44xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/mach-omap2/prm44xx.c b/arch/arm/mach-omap2/prm44xx.c index 7b95729e8359..38a1be6c3694 100644 --- a/arch/arm/mach-omap2/prm44xx.c +++ b/arch/arm/mach-omap2/prm44xx.c @@ -351,7 +351,7 @@ static void omap44xx_prm_reconfigure_io_chain(void) * to occur, WAKEUPENABLE bits must be set in the pad mux registers, and * omap44xx_prm_reconfigure_io_chain() must be called. No return value. */ -static void __init omap44xx_prm_enable_io_wakeup(void) +static void omap44xx_prm_enable_io_wakeup(void) { s32 inst = omap4_prmst_get_prm_dev_inst();
From: Keiji Hayashibara hayashibara.keiji@socionext.com
[ Upstream commit 3511ba7d4ca6f39e2d060bb94e42a41ad1fee7bf ]
This commit fixes incorrect property because it was different from the actual. The parameters of '#address-cells' and '#size-cells' were removed, and 'interrupts', 'pinctrl-names' and 'pinctrl-0' were added.
Fixes: 4dcd5c2781f3 ("spi: add DT bindings for UniPhier SPI controller") Signed-off-by: Keiji Hayashibara hayashibara.keiji@socionext.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- .../devicetree/bindings/spi/spi-uniphier.txt | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/spi/spi-uniphier.txt b/Documentation/devicetree/bindings/spi/spi-uniphier.txt index 504a4ecfc7b1..b04e66a52de5 100644 --- a/Documentation/devicetree/bindings/spi/spi-uniphier.txt +++ b/Documentation/devicetree/bindings/spi/spi-uniphier.txt @@ -5,18 +5,20 @@ UniPhier SoCs have SCSSI which supports SPI single channel. Required properties: - compatible: should be "socionext,uniphier-scssi" - reg: address and length of the spi master registers - - #address-cells: must be <1>, see spi-bus.txt - - #size-cells: must be <0>, see spi-bus.txt - - clocks: A phandle to the clock for the device. - - resets: A phandle to the reset control for the device. + - interrupts: a single interrupt specifier + - pinctrl-names: should be "default" + - pinctrl-0: pin control state for the default mode + - clocks: a phandle to the clock for the device + - resets: a phandle to the reset control for the device
Example:
spi0: spi@54006000 { compatible = "socionext,uniphier-scssi"; reg = <0x54006000 0x100>; - #address-cells = <1>; - #size-cells = <0>; + interrupts = <0 39 4>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spi0>; clocks = <&peri_clk 11>; resets = <&peri_rst 11>; };
On Wed, Dec 05, 2018 at 04:33:54AM -0500, Sasha Levin wrote:
From: Keiji Hayashibara hayashibara.keiji@socionext.com
[ Upstream commit 3511ba7d4ca6f39e2d060bb94e42a41ad1fee7bf ]
This commit fixes incorrect property because it was different from the actual. The parameters of '#address-cells' and '#size-cells' were removed, and 'interrupts', 'pinctrl-names' and 'pinctrl-0' were added.
Not sure we should be backporting documentation changes like this to stable, especially not without accompanying code changes...
On Wed, Dec 05, 2018 at 11:38:20AM +0000, Mark Brown wrote:
On Wed, Dec 05, 2018 at 04:33:54AM -0500, Sasha Levin wrote:
From: Keiji Hayashibara hayashibara.keiji@socionext.com
[ Upstream commit 3511ba7d4ca6f39e2d060bb94e42a41ad1fee7bf ]
This commit fixes incorrect property because it was different from the actual. The parameters of '#address-cells' and '#size-cells' were removed, and 'interrupts', 'pinctrl-names' and 'pinctrl-0' were added.
Not sure we should be backporting documentation changes like this to stable, especially not without accompanying code changes...
Dropped, thank you.
-- Thanks, Sasha
From: Kuninori Morimoto kuninori.morimoto.gx@renesas.com
[ Upstream commit 3ee9a76a8c5a10e1bfb04b81db767c6d562ddaf3 ]
commit 4d230d12710646 ("ASoC: rsnd: fixup not to call clk_get/set under non-atomic") fixuped clock start timing. But it exchanged clock start checker from ssi->usrcnt to ssi->rate.
Current rsnd_ssi_master_clk_start() is called from .prepare, but some player (for example GStreamer) might calls it many times. In such case, the checker might returns error even though it was not error. It should check ssi->usrcnt instead of ssi->rate. This patch fixup it. Without this patch, GStreamer can't switch 48kHz / 44.1kHz.
Reported-by: Yusuke Goda yusuke.goda.sx@renesas.com Signed-off-by: Kuninori Morimoto kuninori.morimoto.gx@renesas.com Tested-by: Yusuke Goda yusuke.goda.sx@renesas.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/sh/rcar/ssi.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/sound/soc/sh/rcar/ssi.c b/sound/soc/sh/rcar/ssi.c index 3f880ec66459..a566dae3ec8a 100644 --- a/sound/soc/sh/rcar/ssi.c +++ b/sound/soc/sh/rcar/ssi.c @@ -283,7 +283,7 @@ static int rsnd_ssi_master_clk_start(struct rsnd_mod *mod, if (rsnd_ssi_is_multi_slave(mod, io)) return 0;
- if (ssi->rate) { + if (ssi->usrcnt > 1) { if (ssi->rate != rate) { dev_err(dev, "SSI parent/child should use same rate\n"); return -EINVAL;
From: Martin Kelly martin@martingkelly.com
[ Upstream commit fe5192ac81ad0d4dfe1395d11f393f0513c15f7f ]
Currently, we enable the device before we enable the device trigger. At high frequencies, this can cause interrupts that don't yet have a poll function associated with them and are thus treated as spurious. At high frequencies with level interrupts, this can even cause an interrupt storm of repeated spurious interrupts (~100,000 on my Beagleboard with the LSM9DS1 magnetometer). If these repeat too much, the interrupt will get disabled and the device will stop functioning.
To prevent these problems, enable the device prior to enabling the device trigger, and disable the divec prior to disabling the trigger. This means there's no window of time during which the device creates interrupts but we have no trigger to answer them.
Fixes: 90efe055629 ("iio: st_sensors: harden interrupt handling") Signed-off-by: Martin Kelly martin@martingkelly.com Tested-by: Denis Ciocca denis.ciocca@st.com Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/iio/magnetometer/st_magn_buffer.c | 12 +++--------- 1 file changed, 3 insertions(+), 9 deletions(-)
diff --git a/drivers/iio/magnetometer/st_magn_buffer.c b/drivers/iio/magnetometer/st_magn_buffer.c index 0a9e8fadfa9d..37ab30566464 100644 --- a/drivers/iio/magnetometer/st_magn_buffer.c +++ b/drivers/iio/magnetometer/st_magn_buffer.c @@ -30,11 +30,6 @@ int st_magn_trig_set_state(struct iio_trigger *trig, bool state) return st_sensors_set_dataready_irq(indio_dev, state); }
-static int st_magn_buffer_preenable(struct iio_dev *indio_dev) -{ - return st_sensors_set_enable(indio_dev, true); -} - static int st_magn_buffer_postenable(struct iio_dev *indio_dev) { int err; @@ -50,7 +45,7 @@ static int st_magn_buffer_postenable(struct iio_dev *indio_dev) if (err < 0) goto st_magn_buffer_postenable_error;
- return err; + return st_sensors_set_enable(indio_dev, true);
st_magn_buffer_postenable_error: kfree(mdata->buffer_data); @@ -63,11 +58,11 @@ static int st_magn_buffer_predisable(struct iio_dev *indio_dev) int err; struct st_sensor_data *mdata = iio_priv(indio_dev);
- err = iio_triggered_buffer_predisable(indio_dev); + err = st_sensors_set_enable(indio_dev, false); if (err < 0) goto st_magn_buffer_predisable_error;
- err = st_sensors_set_enable(indio_dev, false); + err = iio_triggered_buffer_predisable(indio_dev);
st_magn_buffer_predisable_error: kfree(mdata->buffer_data); @@ -75,7 +70,6 @@ static int st_magn_buffer_predisable(struct iio_dev *indio_dev) }
static const struct iio_buffer_setup_ops st_magn_buffer_setup_ops = { - .preenable = &st_magn_buffer_preenable, .postenable = &st_magn_buffer_postenable, .predisable = &st_magn_buffer_predisable, };
From: Rohit kumar rohitkr@codeaurora.org
[ Upstream commit 112b57fa737445b2361be332ce8cc0fd3e2b994e ]
SD line mask for MI2S starts from BIT 0 instead of BIT 1. Fix all bit mask for MI2S SD lines.
Signed-off-by: Rohit kumar rohitkr@codeaurora.org Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/qcom/qdsp6/q6afe.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/sound/soc/qcom/qdsp6/q6afe.c b/sound/soc/qcom/qdsp6/q6afe.c index 000775b4bba8..829b5e987b2a 100644 --- a/sound/soc/qcom/qdsp6/q6afe.c +++ b/sound/soc/qcom/qdsp6/q6afe.c @@ -49,14 +49,14 @@ #define AFE_PORT_I2S_SD1 0x2 #define AFE_PORT_I2S_SD2 0x3 #define AFE_PORT_I2S_SD3 0x4 -#define AFE_PORT_I2S_SD0_MASK BIT(0x1) -#define AFE_PORT_I2S_SD1_MASK BIT(0x2) -#define AFE_PORT_I2S_SD2_MASK BIT(0x3) -#define AFE_PORT_I2S_SD3_MASK BIT(0x4) -#define AFE_PORT_I2S_SD0_1_MASK GENMASK(2, 1) -#define AFE_PORT_I2S_SD2_3_MASK GENMASK(4, 3) -#define AFE_PORT_I2S_SD0_1_2_MASK GENMASK(3, 1) -#define AFE_PORT_I2S_SD0_1_2_3_MASK GENMASK(4, 1) +#define AFE_PORT_I2S_SD0_MASK BIT(0x0) +#define AFE_PORT_I2S_SD1_MASK BIT(0x1) +#define AFE_PORT_I2S_SD2_MASK BIT(0x2) +#define AFE_PORT_I2S_SD3_MASK BIT(0x3) +#define AFE_PORT_I2S_SD0_1_MASK GENMASK(1, 0) +#define AFE_PORT_I2S_SD2_3_MASK GENMASK(3, 2) +#define AFE_PORT_I2S_SD0_1_2_MASK GENMASK(2, 0) +#define AFE_PORT_I2S_SD0_1_2_3_MASK GENMASK(3, 0) #define AFE_PORT_I2S_QUAD01 0x5 #define AFE_PORT_I2S_QUAD23 0x6 #define AFE_PORT_I2S_6CHS 0x7
From: Srinivas Kandagatla srinivas.kandagatla@linaro.org
[ Upstream commit e14856f6cfbb1b96aa45a68f188b147b5bde76b4 ]
For some reason the dapm widgets are incorrectly defined from the start, Not sure how we ended up with such thing. Fix them now!
Without this fix the backend dais are always powered up even if there is no active stream.
Reported-by: Jimmy Cheng-Yi Chiang cychiang@google.com Reported-by: Rohit kumar rohitkr@codeaurora.org Signed-off-by: Srinivas Kandagatla srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/qcom/qdsp6/q6afe-dai.c | 208 +++++++++++++++---------------- 1 file changed, 104 insertions(+), 104 deletions(-)
diff --git a/sound/soc/qcom/qdsp6/q6afe-dai.c b/sound/soc/qcom/qdsp6/q6afe-dai.c index 60ff4a2d3577..8f6c8fc073a9 100644 --- a/sound/soc/qcom/qdsp6/q6afe-dai.c +++ b/sound/soc/qcom/qdsp6/q6afe-dai.c @@ -1112,204 +1112,204 @@ static int q6afe_of_xlate_dai_name(struct snd_soc_component *component, }
static const struct snd_soc_dapm_widget q6afe_dai_widgets[] = { - SND_SOC_DAPM_AIF_OUT("HDMI_RX", "HDMI Playback", 0, 0, 0, 0), - SND_SOC_DAPM_AIF_OUT("SLIMBUS_0_RX", "Slimbus Playback", 0, 0, 0, 0), - SND_SOC_DAPM_AIF_OUT("SLIMBUS_1_RX", "Slimbus1 Playback", 0, 0, 0, 0), - SND_SOC_DAPM_AIF_OUT("SLIMBUS_2_RX", "Slimbus2 Playback", 0, 0, 0, 0), - SND_SOC_DAPM_AIF_OUT("SLIMBUS_3_RX", "Slimbus3 Playback", 0, 0, 0, 0), - SND_SOC_DAPM_AIF_OUT("SLIMBUS_4_RX", "Slimbus4 Playback", 0, 0, 0, 0), - SND_SOC_DAPM_AIF_OUT("SLIMBUS_5_RX", "Slimbus5 Playback", 0, 0, 0, 0), - SND_SOC_DAPM_AIF_OUT("SLIMBUS_6_RX", "Slimbus6 Playback", 0, 0, 0, 0), - SND_SOC_DAPM_AIF_IN("SLIMBUS_0_TX", "Slimbus Capture", 0, 0, 0, 0), - SND_SOC_DAPM_AIF_IN("SLIMBUS_1_TX", "Slimbus1 Capture", 0, 0, 0, 0), - SND_SOC_DAPM_AIF_IN("SLIMBUS_2_TX", "Slimbus2 Capture", 0, 0, 0, 0), - SND_SOC_DAPM_AIF_IN("SLIMBUS_3_TX", "Slimbus3 Capture", 0, 0, 0, 0), - SND_SOC_DAPM_AIF_IN("SLIMBUS_4_TX", "Slimbus4 Capture", 0, 0, 0, 0), - SND_SOC_DAPM_AIF_IN("SLIMBUS_5_TX", "Slimbus5 Capture", 0, 0, 0, 0), - SND_SOC_DAPM_AIF_IN("SLIMBUS_6_TX", "Slimbus6 Capture", 0, 0, 0, 0), - SND_SOC_DAPM_AIF_OUT("QUAT_MI2S_RX", "Quaternary MI2S Playback", + SND_SOC_DAPM_AIF_IN("HDMI_RX", NULL, 0, 0, 0, 0), + SND_SOC_DAPM_AIF_IN("SLIMBUS_0_RX", NULL, 0, 0, 0, 0), + SND_SOC_DAPM_AIF_IN("SLIMBUS_1_RX", NULL, 0, 0, 0, 0), + SND_SOC_DAPM_AIF_IN("SLIMBUS_2_RX", NULL, 0, 0, 0, 0), + SND_SOC_DAPM_AIF_IN("SLIMBUS_3_RX", NULL, 0, 0, 0, 0), + SND_SOC_DAPM_AIF_IN("SLIMBUS_4_RX", NULL, 0, 0, 0, 0), + SND_SOC_DAPM_AIF_IN("SLIMBUS_5_RX", NULL, 0, 0, 0, 0), + SND_SOC_DAPM_AIF_IN("SLIMBUS_6_RX", NULL, 0, 0, 0, 0), + SND_SOC_DAPM_AIF_OUT("SLIMBUS_0_TX", NULL, 0, 0, 0, 0), + SND_SOC_DAPM_AIF_OUT("SLIMBUS_1_TX", NULL, 0, 0, 0, 0), + SND_SOC_DAPM_AIF_OUT("SLIMBUS_2_TX", NULL, 0, 0, 0, 0), + SND_SOC_DAPM_AIF_OUT("SLIMBUS_3_TX", NULL, 0, 0, 0, 0), + SND_SOC_DAPM_AIF_OUT("SLIMBUS_4_TX", NULL, 0, 0, 0, 0), + SND_SOC_DAPM_AIF_OUT("SLIMBUS_5_TX", NULL, 0, 0, 0, 0), + SND_SOC_DAPM_AIF_OUT("SLIMBUS_6_TX", NULL, 0, 0, 0, 0), + SND_SOC_DAPM_AIF_IN("QUAT_MI2S_RX", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_IN("QUAT_MI2S_TX", "Quaternary MI2S Capture", + SND_SOC_DAPM_AIF_OUT("QUAT_MI2S_TX", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_OUT("TERT_MI2S_RX", "Tertiary MI2S Playback", + SND_SOC_DAPM_AIF_IN("TERT_MI2S_RX", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_IN("TERT_MI2S_TX", "Tertiary MI2S Capture", + SND_SOC_DAPM_AIF_OUT("TERT_MI2S_TX", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_OUT("SEC_MI2S_RX", "Secondary MI2S Playback", + SND_SOC_DAPM_AIF_IN("SEC_MI2S_RX", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_IN("SEC_MI2S_TX", "Secondary MI2S Capture", + SND_SOC_DAPM_AIF_OUT("SEC_MI2S_TX", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_OUT("SEC_MI2S_RX_SD1", + SND_SOC_DAPM_AIF_IN("SEC_MI2S_RX_SD1", "Secondary MI2S Playback SD1", 0, 0, 0, 0), - SND_SOC_DAPM_AIF_OUT("PRI_MI2S_RX", "Primary MI2S Playback", + SND_SOC_DAPM_AIF_IN("PRI_MI2S_RX", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_IN("PRI_MI2S_TX", "Primary MI2S Capture", + SND_SOC_DAPM_AIF_OUT("PRI_MI2S_TX", NULL, 0, 0, 0, 0),
- SND_SOC_DAPM_AIF_OUT("PRIMARY_TDM_RX_0", "Primary TDM0 Playback", + SND_SOC_DAPM_AIF_IN("PRIMARY_TDM_RX_0", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_OUT("PRIMARY_TDM_RX_1", "Primary TDM1 Playback", + SND_SOC_DAPM_AIF_IN("PRIMARY_TDM_RX_1", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_OUT("PRIMARY_TDM_RX_2", "Primary TDM2 Playback", + SND_SOC_DAPM_AIF_IN("PRIMARY_TDM_RX_2", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_OUT("PRIMARY_TDM_RX_3", "Primary TDM3 Playback", + SND_SOC_DAPM_AIF_IN("PRIMARY_TDM_RX_3", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_OUT("PRIMARY_TDM_RX_4", "Primary TDM4 Playback", + SND_SOC_DAPM_AIF_IN("PRIMARY_TDM_RX_4", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_OUT("PRIMARY_TDM_RX_5", "Primary TDM5 Playback", + SND_SOC_DAPM_AIF_IN("PRIMARY_TDM_RX_5", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_OUT("PRIMARY_TDM_RX_6", "Primary TDM6 Playback", + SND_SOC_DAPM_AIF_IN("PRIMARY_TDM_RX_6", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_OUT("PRIMARY_TDM_RX_7", "Primary TDM7 Playback", + SND_SOC_DAPM_AIF_IN("PRIMARY_TDM_RX_7", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_IN("PRIMARY_TDM_TX_0", "Primary TDM0 Capture", + SND_SOC_DAPM_AIF_OUT("PRIMARY_TDM_TX_0", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_IN("PRIMARY_TDM_TX_1", "Primary TDM1 Capture", + SND_SOC_DAPM_AIF_OUT("PRIMARY_TDM_TX_1", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_IN("PRIMARY_TDM_TX_2", "Primary TDM2 Capture", + SND_SOC_DAPM_AIF_OUT("PRIMARY_TDM_TX_2", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_IN("PRIMARY_TDM_TX_3", "Primary TDM3 Capture", + SND_SOC_DAPM_AIF_OUT("PRIMARY_TDM_TX_3", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_IN("PRIMARY_TDM_TX_4", "Primary TDM4 Capture", + SND_SOC_DAPM_AIF_OUT("PRIMARY_TDM_TX_4", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_IN("PRIMARY_TDM_TX_5", "Primary TDM5 Capture", + SND_SOC_DAPM_AIF_OUT("PRIMARY_TDM_TX_5", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_IN("PRIMARY_TDM_TX_6", "Primary TDM6 Capture", + SND_SOC_DAPM_AIF_OUT("PRIMARY_TDM_TX_6", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_IN("PRIMARY_TDM_TX_7", "Primary TDM7 Capture", + SND_SOC_DAPM_AIF_OUT("PRIMARY_TDM_TX_7", NULL, 0, 0, 0, 0),
- SND_SOC_DAPM_AIF_OUT("SEC_TDM_RX_0", "Secondary TDM0 Playback", + SND_SOC_DAPM_AIF_IN("SEC_TDM_RX_0", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_OUT("SEC_TDM_RX_1", "Secondary TDM1 Playback", + SND_SOC_DAPM_AIF_IN("SEC_TDM_RX_1", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_OUT("SEC_TDM_RX_2", "Secondary TDM2 Playback", + SND_SOC_DAPM_AIF_IN("SEC_TDM_RX_2", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_OUT("SEC_TDM_RX_3", "Secondary TDM3 Playback", + SND_SOC_DAPM_AIF_IN("SEC_TDM_RX_3", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_OUT("SEC_TDM_RX_4", "Secondary TDM4 Playback", + SND_SOC_DAPM_AIF_IN("SEC_TDM_RX_4", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_OUT("SEC_TDM_RX_5", "Secondary TDM5 Playback", + SND_SOC_DAPM_AIF_IN("SEC_TDM_RX_5", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_OUT("SEC_TDM_RX_6", "Secondary TDM6 Playback", + SND_SOC_DAPM_AIF_IN("SEC_TDM_RX_6", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_OUT("SEC_TDM_RX_7", "Secondary TDM7 Playback", + SND_SOC_DAPM_AIF_IN("SEC_TDM_RX_7", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_IN("SEC_TDM_TX_0", "Secondary TDM0 Capture", + SND_SOC_DAPM_AIF_OUT("SEC_TDM_TX_0", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_IN("SEC_TDM_TX_1", "Secondary TDM1 Capture", + SND_SOC_DAPM_AIF_OUT("SEC_TDM_TX_1", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_IN("SEC_TDM_TX_2", "Secondary TDM2 Capture", + SND_SOC_DAPM_AIF_OUT("SEC_TDM_TX_2", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_IN("SEC_TDM_TX_3", "Secondary TDM3 Capture", + SND_SOC_DAPM_AIF_OUT("SEC_TDM_TX_3", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_IN("SEC_TDM_TX_4", "Secondary TDM4 Capture", + SND_SOC_DAPM_AIF_OUT("SEC_TDM_TX_4", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_IN("SEC_TDM_TX_5", "Secondary TDM5 Capture", + SND_SOC_DAPM_AIF_OUT("SEC_TDM_TX_5", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_IN("SEC_TDM_TX_6", "Secondary TDM6 Capture", + SND_SOC_DAPM_AIF_OUT("SEC_TDM_TX_6", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_IN("SEC_TDM_TX_7", "Secondary TDM7 Capture", + SND_SOC_DAPM_AIF_OUT("SEC_TDM_TX_7", NULL, 0, 0, 0, 0),
- SND_SOC_DAPM_AIF_OUT("TERT_TDM_RX_0", "Tertiary TDM0 Playback", + SND_SOC_DAPM_AIF_IN("TERT_TDM_RX_0", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_OUT("TERT_TDM_RX_1", "Tertiary TDM1 Playback", + SND_SOC_DAPM_AIF_IN("TERT_TDM_RX_1", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_OUT("TERT_TDM_RX_2", "Tertiary TDM2 Playback", + SND_SOC_DAPM_AIF_IN("TERT_TDM_RX_2", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_OUT("TERT_TDM_RX_3", "Tertiary TDM3 Playback", + SND_SOC_DAPM_AIF_IN("TERT_TDM_RX_3", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_OUT("TERT_TDM_RX_4", "Tertiary TDM4 Playback", + SND_SOC_DAPM_AIF_IN("TERT_TDM_RX_4", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_OUT("TERT_TDM_RX_5", "Tertiary TDM5 Playback", + SND_SOC_DAPM_AIF_IN("TERT_TDM_RX_5", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_OUT("TERT_TDM_RX_6", "Tertiary TDM6 Playback", + SND_SOC_DAPM_AIF_IN("TERT_TDM_RX_6", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_OUT("TERT_TDM_RX_7", "Tertiary TDM7 Playback", + SND_SOC_DAPM_AIF_IN("TERT_TDM_RX_7", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_IN("TERT_TDM_TX_0", "Tertiary TDM0 Capture", + SND_SOC_DAPM_AIF_OUT("TERT_TDM_TX_0", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_IN("TERT_TDM_TX_1", "Tertiary TDM1 Capture", + SND_SOC_DAPM_AIF_OUT("TERT_TDM_TX_1", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_IN("TERT_TDM_TX_2", "Tertiary TDM2 Capture", + SND_SOC_DAPM_AIF_OUT("TERT_TDM_TX_2", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_IN("TERT_TDM_TX_3", "Tertiary TDM3 Capture", + SND_SOC_DAPM_AIF_OUT("TERT_TDM_TX_3", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_IN("TERT_TDM_TX_4", "Tertiary TDM4 Capture", + SND_SOC_DAPM_AIF_OUT("TERT_TDM_TX_4", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_IN("TERT_TDM_TX_5", "Tertiary TDM5 Capture", + SND_SOC_DAPM_AIF_OUT("TERT_TDM_TX_5", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_IN("TERT_TDM_TX_6", "Tertiary TDM6 Capture", + SND_SOC_DAPM_AIF_OUT("TERT_TDM_TX_6", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_IN("TERT_TDM_TX_7", "Tertiary TDM7 Capture", + SND_SOC_DAPM_AIF_OUT("TERT_TDM_TX_7", NULL, 0, 0, 0, 0),
- SND_SOC_DAPM_AIF_OUT("QUAT_TDM_RX_0", "Quaternary TDM0 Playback", + SND_SOC_DAPM_AIF_IN("QUAT_TDM_RX_0", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_OUT("QUAT_TDM_RX_1", "Quaternary TDM1 Playback", + SND_SOC_DAPM_AIF_IN("QUAT_TDM_RX_1", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_OUT("QUAT_TDM_RX_2", "Quaternary TDM2 Playback", + SND_SOC_DAPM_AIF_IN("QUAT_TDM_RX_2", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_OUT("QUAT_TDM_RX_3", "Quaternary TDM3 Playback", + SND_SOC_DAPM_AIF_IN("QUAT_TDM_RX_3", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_OUT("QUAT_TDM_RX_4", "Quaternary TDM4 Playback", + SND_SOC_DAPM_AIF_IN("QUAT_TDM_RX_4", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_OUT("QUAT_TDM_RX_5", "Quaternary TDM5 Playback", + SND_SOC_DAPM_AIF_IN("QUAT_TDM_RX_5", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_OUT("QUAT_TDM_RX_6", "Quaternary TDM6 Playback", + SND_SOC_DAPM_AIF_IN("QUAT_TDM_RX_6", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_OUT("QUAT_TDM_RX_7", "Quaternary TDM7 Playback", + SND_SOC_DAPM_AIF_IN("QUAT_TDM_RX_7", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_IN("QUAT_TDM_TX_0", "Quaternary TDM0 Capture", + SND_SOC_DAPM_AIF_OUT("QUAT_TDM_TX_0", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_IN("QUAT_TDM_TX_1", "Quaternary TDM1 Capture", + SND_SOC_DAPM_AIF_OUT("QUAT_TDM_TX_1", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_IN("QUAT_TDM_TX_2", "Quaternary TDM2 Capture", + SND_SOC_DAPM_AIF_OUT("QUAT_TDM_TX_2", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_IN("QUAT_TDM_TX_3", "Quaternary TDM3 Capture", + SND_SOC_DAPM_AIF_OUT("QUAT_TDM_TX_3", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_IN("QUAT_TDM_TX_4", "Quaternary TDM4 Capture", + SND_SOC_DAPM_AIF_OUT("QUAT_TDM_TX_4", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_IN("QUAT_TDM_TX_5", "Quaternary TDM5 Capture", + SND_SOC_DAPM_AIF_OUT("QUAT_TDM_TX_5", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_IN("QUAT_TDM_TX_6", "Quaternary TDM6 Capture", + SND_SOC_DAPM_AIF_OUT("QUAT_TDM_TX_6", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_IN("QUAT_TDM_TX_7", "Quaternary TDM7 Capture", + SND_SOC_DAPM_AIF_OUT("QUAT_TDM_TX_7", NULL, 0, 0, 0, 0),
- SND_SOC_DAPM_AIF_OUT("QUIN_TDM_RX_0", "Quinary TDM0 Playback", + SND_SOC_DAPM_AIF_IN("QUIN_TDM_RX_0", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_OUT("QUIN_TDM_RX_1", "Quinary TDM1 Playback", + SND_SOC_DAPM_AIF_IN("QUIN_TDM_RX_1", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_OUT("QUIN_TDM_RX_2", "Quinary TDM2 Playback", + SND_SOC_DAPM_AIF_IN("QUIN_TDM_RX_2", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_OUT("QUIN_TDM_RX_3", "Quinary TDM3 Playback", + SND_SOC_DAPM_AIF_IN("QUIN_TDM_RX_3", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_OUT("QUIN_TDM_RX_4", "Quinary TDM4 Playback", + SND_SOC_DAPM_AIF_IN("QUIN_TDM_RX_4", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_OUT("QUIN_TDM_RX_5", "Quinary TDM5 Playback", + SND_SOC_DAPM_AIF_IN("QUIN_TDM_RX_5", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_OUT("QUIN_TDM_RX_6", "Quinary TDM6 Playback", + SND_SOC_DAPM_AIF_IN("QUIN_TDM_RX_6", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_OUT("QUIN_TDM_RX_7", "Quinary TDM7 Playback", + SND_SOC_DAPM_AIF_IN("QUIN_TDM_RX_7", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_IN("QUIN_TDM_TX_0", "Quinary TDM0 Capture", + SND_SOC_DAPM_AIF_OUT("QUIN_TDM_TX_0", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_IN("QUIN_TDM_TX_1", "Quinary TDM1 Capture", + SND_SOC_DAPM_AIF_OUT("QUIN_TDM_TX_1", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_IN("QUIN_TDM_TX_2", "Quinary TDM2 Capture", + SND_SOC_DAPM_AIF_OUT("QUIN_TDM_TX_2", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_IN("QUIN_TDM_TX_3", "Quinary TDM3 Capture", + SND_SOC_DAPM_AIF_OUT("QUIN_TDM_TX_3", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_IN("QUIN_TDM_TX_4", "Quinary TDM4 Capture", + SND_SOC_DAPM_AIF_OUT("QUIN_TDM_TX_4", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_IN("QUIN_TDM_TX_5", "Quinary TDM5 Capture", + SND_SOC_DAPM_AIF_OUT("QUIN_TDM_TX_5", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_IN("QUIN_TDM_TX_6", "Quinary TDM6 Capture", + SND_SOC_DAPM_AIF_OUT("QUIN_TDM_TX_6", NULL, 0, 0, 0, 0), - SND_SOC_DAPM_AIF_IN("QUIN_TDM_TX_7", "Quinary TDM7 Capture", + SND_SOC_DAPM_AIF_OUT("QUIN_TDM_TX_7", NULL, 0, 0, 0, 0), };
From: Christophe JAILLET christophe.jaillet@wanadoo.fr
[ Upstream commit c3e43d8b958bd6849817393483e805d8638a8ab7 ]
We return 0 unconditionally in 'rtw_wx_read32()'. However, 'ret' is set to some error codes in several error handling paths.
Return 'ret' instead to propagate the error code.
Fixes: 554c0a3abf216 ("staging: Add rtl8723bs sdio wifi driver") Signed-off-by: Christophe JAILLET christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/staging/rtl8723bs/os_dep/ioctl_linux.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/staging/rtl8723bs/os_dep/ioctl_linux.c b/drivers/staging/rtl8723bs/os_dep/ioctl_linux.c index c38298d960ff..4f120e72c7d2 100644 --- a/drivers/staging/rtl8723bs/os_dep/ioctl_linux.c +++ b/drivers/staging/rtl8723bs/os_dep/ioctl_linux.c @@ -2289,7 +2289,7 @@ static int rtw_wx_read32(struct net_device *dev, exit: kfree(ptmp);
- return 0; + return ret; }
static int rtw_wx_write32(struct net_device *dev,
From: Adam Ford aford173@gmail.com
[ Upstream commit e7f4ffffa972db4820c23ff9831a6a4f3f6d8cc5 ]
The MMC1 is active low, not active high. For some reason, this worked with different combination of U-Boot and kernels, but it's supposed to be active low and is currently broken.
Fixes: cfaa856a2510 ("ARM: dts: am3517: Add pinmuxing, CD and WP for MMC1") #kernel 4.18+
Signed-off-by: Adam Ford aford173@gmail.com Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/am3517-evm.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts index 1d158cfda15f..c45aef806870 100644 --- a/arch/arm/boot/dts/am3517-evm.dts +++ b/arch/arm/boot/dts/am3517-evm.dts @@ -227,7 +227,7 @@ vmmc-supply = <&vmmc_fixed>; bus-width = <4>; wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; /* gpio_126 */ - cd-gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio_127 */ + cd-gpios = <&gpio4 31 GPIO_ACTIVE_LOW>; /* gpio_127 */ };
&mmc3 {
From: Adam Ford aford173@gmail.com
[ Upstream commit 6809564d64ff1301d44c13334cc0e8369e825a20 ]
When the Torpedo was first introduced back at Kernel 4.2, the interrupt extended flag has been set incorrectly.
It was subsequently moved, so this patch corrects Kernel 4.18+
Fixes: a38867305203 ("ARM: dts: Move move WiFi bindings to logicpd-torpedo-37xx-devkit") # v4.18+
Signed-off-by: Adam Ford aford173@gmail.com Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts index 9d5d53fbe9c0..c39cf2ca54da 100644 --- a/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts +++ b/arch/arm/boot/dts/logicpd-torpedo-37xx-devkit.dts @@ -35,7 +35,7 @@ * jumpering combinations for the long run. */ &mmc3 { - interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>; + interrupts-extended = <&intc 94 &omap3_pmx_core 0x136>; pinctrl-0 = <&mmc3_pins &mmc3_core2_pins>; pinctrl-names = "default"; vmmc-supply = <&wl12xx_vmmc>;
From: Adam Ford aford173@gmail.com
[ Upstream commit 3d8b804bc528d3720ec0c39c212af92dafaf6e84 ]
The interrupt on mmc3_dat1 is wrong which prevents this from appearing in /proc/interrupts.
Fixes: ab8dd3aed011 ("ARM: DTS: Add minimal Support for Logic PD DM3730 SOM-LV") #Kernel 4.9+
Signed-off-by: Adam Ford aford173@gmail.com Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/logicpd-som-lv.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/logicpd-som-lv.dtsi b/arch/arm/boot/dts/logicpd-som-lv.dtsi index ac343330d0c8..98b682a8080c 100644 --- a/arch/arm/boot/dts/logicpd-som-lv.dtsi +++ b/arch/arm/boot/dts/logicpd-som-lv.dtsi @@ -129,7 +129,7 @@ };
&mmc3 { - interrupts-extended = <&intc 94 &omap3_pmx_core2 0x46>; + interrupts-extended = <&intc 94 &omap3_pmx_core 0x136>; pinctrl-0 = <&mmc3_pins &wl127x_gpio>; pinctrl-names = "default"; vmmc-supply = <&wl12xx_vmmc>;
From: Adam Ford aford173@gmail.com
[ Upstream commit 419b194cdedc76d0d3cd5b0900db0fa8177c4a52 ]
At the same time the AM3517 EVM was gaining WiFi support, separate patches were introduced to move the interrupt from HIGH to RISING. Because they overlapped, this was not done to the AM3517-EVM. This patch fixes Kernel 4.19+
Fixes: 6bf5e3410f19 ("ARM: dts: am3517-som: Add WL127x Wifi")
Signed-off-by: Adam Ford aford173@gmail.com Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/am3517-som.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/am3517-som.dtsi b/arch/arm/boot/dts/am3517-som.dtsi index dae6e458e59f..b1c988eed87c 100644 --- a/arch/arm/boot/dts/am3517-som.dtsi +++ b/arch/arm/boot/dts/am3517-som.dtsi @@ -163,7 +163,7 @@ compatible = "ti,wl1271"; reg = <2>; interrupt-parent = <&gpio6>; - interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; /* gpio_170 */ + interrupts = <10 IRQ_TYPE_EDGE_RISING>; /* gpio_170 */ ref-clock-frequency = <26000000>; tcxo-clock-frequency = <26000000>; };
From: Janusz Krzysztofik jmkrzyszt@gmail.com
[ Upstream commit cec83ff1241ec98113a19385ea9e9cfa9aa4125b ]
While playing with initialization order of modem device, it has been discovered that under some circumstances (early console init, I believe) its .pm() callback may be called before the uart_port->private_data pointer is initialized from plat_serial8250_port->private_data, resulting in NULL pointer dereference. Fix it by checking for uninitialized pointer before using it in modem_pm().
Fixes: aabf31737a6a ("ARM: OMAP1: ams-delta: update the modem to use regulator API") Signed-off-by: Janusz Krzysztofik jmkrzyszt@gmail.com Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/mach-omap1/board-ams-delta.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/arch/arm/mach-omap1/board-ams-delta.c b/arch/arm/mach-omap1/board-ams-delta.c index dd28d2614d7f..d10d8831f527 100644 --- a/arch/arm/mach-omap1/board-ams-delta.c +++ b/arch/arm/mach-omap1/board-ams-delta.c @@ -726,6 +726,9 @@ static void modem_pm(struct uart_port *port, unsigned int state, unsigned old) struct modem_private_data *priv = port->private_data; int ret;
+ if (!priv) + return; + if (IS_ERR(priv->regulator)) return;
From: Quentin Monnet quentin.monnet@netronome.com
[ Upstream commit 53909030aa29bffe1f8490df62176c2375135652 ]
Function getline() returns -1 on failure to read a line, thus creating an infinite loop in get_fdinfo() if the key is not found. Fix it by calling the function only as long as we get a strictly positive return value.
Found by copying the code for a key which is not always present...
Fixes: 71bb428fe2c1 ("tools: bpf: add bpftool") Signed-off-by: Quentin Monnet quentin.monnet@netronome.com Reviewed-by: Jakub Kicinski jakub.kicinski@netronome.com Signed-off-by: Daniel Borkmann daniel@iogearbox.net Signed-off-by: Sasha Levin sashal@kernel.org --- tools/bpf/bpftool/common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/bpf/bpftool/common.c b/tools/bpf/bpftool/common.c index b3a0709ea7ed..fcaf00621102 100644 --- a/tools/bpf/bpftool/common.c +++ b/tools/bpf/bpftool/common.c @@ -304,7 +304,7 @@ char *get_fdinfo(int fd, const char *key) return NULL; }
- while ((n = getline(&line, &line_n, fdi))) { + while ((n = getline(&line, &line_n, fdi)) > 0) { char *value; int len;
From: Vasily Khoruzhick anarsoul@gmail.com
[ Upstream commit 278df5e5527b633f4882f1680ad58b62a7c07bfe ]
drvdata is actually sun8i_codec, not snd_soc_card, so it crashes when calling snd_soc_card_get_drvdata().
Drop card and scodec vars anyway since we don't need to disable/unprepare clocks - it's already done by calling runtime_suspend()
Drop clk_disable_unprepare() calls for the same reason.
Fixes: 36c684936fae7 ("ASoC: Add sun8i digital audio codec") Signed-off-by: Vasily Khoruzhick anarsoul@gmail.com Acked-by: Maxime Ripard maxime.ripard@bootlin.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/sunxi/sun8i-codec.c | 6 ------ 1 file changed, 6 deletions(-)
diff --git a/sound/soc/sunxi/sun8i-codec.c b/sound/soc/sunxi/sun8i-codec.c index fb37dd927e33..bf615fa16dc8 100644 --- a/sound/soc/sunxi/sun8i-codec.c +++ b/sound/soc/sunxi/sun8i-codec.c @@ -589,16 +589,10 @@ static int sun8i_codec_probe(struct platform_device *pdev)
static int sun8i_codec_remove(struct platform_device *pdev) { - struct snd_soc_card *card = platform_get_drvdata(pdev); - struct sun8i_codec *scodec = snd_soc_card_get_drvdata(card); - pm_runtime_disable(&pdev->dev); if (!pm_runtime_status_suspended(&pdev->dev)) sun8i_codec_runtime_suspend(&pdev->dev);
- clk_disable_unprepare(scodec->clk_module); - clk_disable_unprepare(scodec->clk_bus); - return 0; }
From: Bjorn Andersson bjorn.andersson@linaro.org
[ Upstream commit 5f8d3ab136d0ccb59c4d628d8f85e0d8f2761d07 ]
With the introduction of commit 3edfb7bd76bd ("gpiolib: Show correct direction from the beginning") the gpiolib will attempt to read the direction of all pins, which triggers a read from protected register regions.
The pins 0 through 3 and 81 through 84 are protected, so mark these as reserved.
Signed-off-by: Bjorn Andersson bjorn.andersson@linaro.org Reviewed-by: Stephen Boyd sboyd@kernel.org Reviewed-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Andy Gross andy.gross@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/boot/dts/qcom/sdm845-mtp.dts | 4 ++++ 1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts index 6d651f314193..6921f8dc5ebb 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts @@ -31,6 +31,10 @@ status = "okay"; };
+&tlmm { + gpio-reserved-ranges = <0 4>, <81 4>; +}; + &uart9 { status = "okay"; };
From: YueHaibing yuehaibing@huawei.com
[ Upstream commit c4b7d1ba7d263b74bb72e9325262a67139605cde ]
Fixes gcc '-Wunused-but-set-variable' warning:
fs/sysv/inode.c: In function '__sysv_write_inode': fs/sysv/inode.c:239:6: warning: variable 'err' set but not used [-Wunused-but-set-variable]
__sysv_write_inode should return 'err' instead of 0
Fixes: 05459ca81ac3 ("repair sysv_write_inode(), switch sysv to simple_fsync()") Signed-off-by: YueHaibing yuehaibing@huawei.com Signed-off-by: Al Viro viro@zeniv.linux.org.uk Signed-off-by: Sasha Levin sashal@kernel.org --- fs/sysv/inode.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/sysv/inode.c b/fs/sysv/inode.c index 499a20a5a010..273736f41be3 100644 --- a/fs/sysv/inode.c +++ b/fs/sysv/inode.c @@ -275,7 +275,7 @@ static int __sysv_write_inode(struct inode *inode, int wait) } } brelse(bh); - return 0; + return err; }
int sysv_write_inode(struct inode *inode, struct writeback_control *wbc)
From: Taehee Yoo ap420073@gmail.com
[ Upstream commit fd3e71a9f71e232181a225301a75936373636ccc ]
conn_free() holds lock with spin_lock() and it is called by both nf_conncount_lookup() and nf_conncount_gc_list(). nf_conncount_lookup() is called from bottom-half context and nf_conncount_gc_list() from process context. So that spin_lock() call is not safe. Hence conn_free() should use spin_lock_bh() instead of spin_lock().
test commands: %nft add table ip filter %nft add chain ip filter input { type filter hook input priority 0; } %nft add rule filter input meter test { ip saddr ct count over 2 } \ counter
splat looks like: [ 461.996507] ================================ [ 461.998999] WARNING: inconsistent lock state [ 461.998999] 4.19.0-rc6+ #22 Not tainted [ 461.998999] -------------------------------- [ 461.998999] inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. [ 461.998999] kworker/0:2/134 [HC0[0]:SC0[0]:HE1:SE1] takes: [ 461.998999] 00000000a71a559a (&(&list->list_lock)->rlock){+.?.}, at: conn_free+0x69/0x2b0 [nf_conncount] [ 461.998999] {IN-SOFTIRQ-W} state was registered at: [ 461.998999] _raw_spin_lock+0x30/0x70 [ 461.998999] nf_conncount_add+0x28a/0x520 [nf_conncount] [ 461.998999] nft_connlimit_eval+0x401/0x580 [nft_connlimit] [ 461.998999] nft_dynset_eval+0x32b/0x590 [nf_tables] [ 461.998999] nft_do_chain+0x497/0x1430 [nf_tables] [ 461.998999] nft_do_chain_ipv4+0x255/0x330 [nf_tables] [ 461.998999] nf_hook_slow+0xb1/0x160 [ ... ] [ 461.998999] other info that might help us debug this: [ 461.998999] Possible unsafe locking scenario: [ 461.998999] [ 461.998999] CPU0 [ 461.998999] ---- [ 461.998999] lock(&(&list->list_lock)->rlock); [ 461.998999] <Interrupt> [ 461.998999] lock(&(&list->list_lock)->rlock); [ 461.998999] [ 461.998999] *** DEADLOCK *** [ 461.998999] [ ... ]
Fixes: 5c789e131cbb ("netfilter: nf_conncount: Add list lock and gc worker, and RCU for init tree search") Signed-off-by: Taehee Yoo ap420073@gmail.com Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/nf_conncount.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/net/netfilter/nf_conncount.c b/net/netfilter/nf_conncount.c index 02ca7df793f5..71b1f4f99580 100644 --- a/net/netfilter/nf_conncount.c +++ b/net/netfilter/nf_conncount.c @@ -106,15 +106,15 @@ nf_conncount_add(struct nf_conncount_list *list, conn->zone = *zone; conn->cpu = raw_smp_processor_id(); conn->jiffies32 = (u32)jiffies; - spin_lock(&list->list_lock); + spin_lock_bh(&list->list_lock); if (list->dead == true) { kmem_cache_free(conncount_conn_cachep, conn); - spin_unlock(&list->list_lock); + spin_unlock_bh(&list->list_lock); return NF_CONNCOUNT_SKIP; } list_add_tail(&conn->node, &list->head); list->count++; - spin_unlock(&list->list_lock); + spin_unlock_bh(&list->list_lock); return NF_CONNCOUNT_ADDED; } EXPORT_SYMBOL_GPL(nf_conncount_add); @@ -132,10 +132,10 @@ static bool conn_free(struct nf_conncount_list *list, { bool free_entry = false;
- spin_lock(&list->list_lock); + spin_lock_bh(&list->list_lock);
if (list->count == 0) { - spin_unlock(&list->list_lock); + spin_unlock_bh(&list->list_lock); return free_entry; }
@@ -144,7 +144,7 @@ static bool conn_free(struct nf_conncount_list *list, if (list->count == 0) free_entry = true;
- spin_unlock(&list->list_lock); + spin_unlock_bh(&list->list_lock); call_rcu(&conn->rcu_head, __conn_free); return free_entry; }
From: Taehee Yoo ap420073@gmail.com
[ Upstream commit 31568ec09ea02a050249921698c9729419539cce ]
nf_conncount_tuple is an element of nft_connlimit and that is deleted by conn_free(). Elements can be deleted by both GC routine and data path functions (nf_conncount_lookup, nf_conncount_add) and they call conn_free() to free elements. But conn_free() only protects lists, not each element. So that list_del corruption could occurred.
The conn_free() doesn't check whether element is already deleted. In order to protect elements, dead flag is added. If an element is deleted, dead flag is set. The only conn_free() can delete elements so that both list lock and dead flag are enough to protect it.
test commands: %nft add table ip filter %nft add chain ip filter input { type filter hook input priority 0; } %nft add rule filter input meter test { ip id ct count over 2 } counter
splat looks like: [ 1779.495778] list_del corruption, ffff8800b6e12008->prev is LIST_POISON2 (dead000000000200) [ 1779.505453] ------------[ cut here ]------------ [ 1779.506260] kernel BUG at lib/list_debug.c:50! [ 1779.515831] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 1779.516772] CPU: 0 PID: 33 Comm: kworker/0:2 Not tainted 4.19.0-rc6+ #22 [ 1779.516772] Workqueue: events_power_efficient nft_rhash_gc [nf_tables_set] [ 1779.516772] RIP: 0010:__list_del_entry_valid+0xd8/0x150 [ 1779.516772] Code: 39 48 83 c4 08 b8 01 00 00 00 5b 5d c3 48 89 ea 48 c7 c7 00 c3 5b 98 e8 0f dc 40 ff 0f 0b 48 c7 c7 60 c3 5b 98 e8 01 dc 40 ff <0f> 0b 48 c7 c7 c0 c3 5b 98 e8 f3 db 40 ff 0f 0b 48 c7 c7 20 c4 5b [ 1779.516772] RSP: 0018:ffff880119127420 EFLAGS: 00010286 [ 1779.516772] RAX: 000000000000004e RBX: dead000000000200 RCX: 0000000000000000 [ 1779.516772] RDX: 000000000000004e RSI: 0000000000000008 RDI: ffffed0023224e7a [ 1779.516772] RBP: ffff88011934bc10 R08: ffffed002367cea9 R09: ffffed002367cea9 [ 1779.516772] R10: 0000000000000001 R11: ffffed002367cea8 R12: ffff8800b6e12008 [ 1779.516772] R13: ffff8800b6e12010 R14: ffff88011934bc20 R15: ffff8800b6e12008 [ 1779.516772] FS: 0000000000000000(0000) GS:ffff88011b200000(0000) knlGS:0000000000000000 [ 1779.516772] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1779.516772] CR2: 00007fc876534010 CR3: 000000010da16000 CR4: 00000000001006f0 [ 1779.516772] Call Trace: [ 1779.516772] conn_free+0x9f/0x2b0 [nf_conncount] [ 1779.516772] ? nf_ct_tmpl_alloc+0x2a0/0x2a0 [nf_conntrack] [ 1779.516772] ? nf_conncount_add+0x520/0x520 [nf_conncount] [ 1779.516772] ? do_raw_spin_trylock+0x1a0/0x1a0 [ 1779.516772] ? do_raw_spin_trylock+0x10/0x1a0 [ 1779.516772] find_or_evict+0xe5/0x150 [nf_conncount] [ 1779.516772] nf_conncount_gc_list+0x162/0x360 [nf_conncount] [ 1779.516772] ? nf_conncount_lookup+0xee0/0xee0 [nf_conncount] [ 1779.516772] ? _raw_spin_unlock_irqrestore+0x45/0x50 [ 1779.516772] ? trace_hardirqs_off+0x6b/0x220 [ 1779.516772] ? trace_hardirqs_on_caller+0x220/0x220 [ 1779.516772] nft_rhash_gc+0x16b/0x540 [nf_tables_set] [ ... ]
Fixes: 5c789e131cbb ("netfilter: nf_conncount: Add list lock and gc worker, and RCU for init tree search") Signed-off-by: Taehee Yoo ap420073@gmail.com Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/nf_conncount.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/net/netfilter/nf_conncount.c b/net/netfilter/nf_conncount.c index 71b1f4f99580..cb33709138df 100644 --- a/net/netfilter/nf_conncount.c +++ b/net/netfilter/nf_conncount.c @@ -49,6 +49,7 @@ struct nf_conncount_tuple { struct nf_conntrack_zone zone; int cpu; u32 jiffies32; + bool dead; struct rcu_head rcu_head; };
@@ -106,6 +107,7 @@ nf_conncount_add(struct nf_conncount_list *list, conn->zone = *zone; conn->cpu = raw_smp_processor_id(); conn->jiffies32 = (u32)jiffies; + conn->dead = false; spin_lock_bh(&list->list_lock); if (list->dead == true) { kmem_cache_free(conncount_conn_cachep, conn); @@ -134,12 +136,13 @@ static bool conn_free(struct nf_conncount_list *list,
spin_lock_bh(&list->list_lock);
- if (list->count == 0) { + if (conn->dead) { spin_unlock_bh(&list->list_lock); - return free_entry; + return free_entry; }
list->count--; + conn->dead = true; list_del_rcu(&conn->node); if (list->count == 0) free_entry = true;
From: Taehee Yoo ap420073@gmail.com
[ Upstream commit 3c5cdb17c3be76714dfd0d03e384f70579545614 ]
When list->count is 0, the list is deleted by GC. But list->count is never reached 0 because initial count value is 1 and it is increased when node is inserted. So that initial value of list->count should be 0.
Originally GC always finds zero count list through deleting node and decreasing count. However, list may be left empty since node insertion may fail eg. allocaton problem. In order to solve this problem, GC routine also finds zero count list without deleting node.
Fixes: cb2b36f5a97d ("netfilter: nf_conncount: Switch to plain list") Signed-off-by: Taehee Yoo ap420073@gmail.com Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/nf_conncount.c | 18 +++++++++++++++--- 1 file changed, 15 insertions(+), 3 deletions(-)
diff --git a/net/netfilter/nf_conncount.c b/net/netfilter/nf_conncount.c index cb33709138df..8acae4a3e4c0 100644 --- a/net/netfilter/nf_conncount.c +++ b/net/netfilter/nf_conncount.c @@ -144,8 +144,10 @@ static bool conn_free(struct nf_conncount_list *list, list->count--; conn->dead = true; list_del_rcu(&conn->node); - if (list->count == 0) + if (list->count == 0) { + list->dead = true; free_entry = true; + }
spin_unlock_bh(&list->list_lock); call_rcu(&conn->rcu_head, __conn_free); @@ -248,7 +250,7 @@ void nf_conncount_list_init(struct nf_conncount_list *list) { spin_lock_init(&list->list_lock); INIT_LIST_HEAD(&list->head); - list->count = 1; + list->count = 0; list->dead = false; } EXPORT_SYMBOL_GPL(nf_conncount_list_init); @@ -262,6 +264,7 @@ bool nf_conncount_gc_list(struct net *net, struct nf_conn *found_ct; unsigned int collected = 0; bool free_entry = false; + bool ret = false;
list_for_each_entry_safe(conn, conn_n, &list->head, node) { found = find_or_evict(net, list, conn, &free_entry); @@ -291,7 +294,15 @@ bool nf_conncount_gc_list(struct net *net, if (collected > CONNCOUNT_GC_MAX_NODES) return false; } - return false; + + spin_lock_bh(&list->list_lock); + if (!list->count) { + list->dead = true; + ret = true; + } + spin_unlock_bh(&list->list_lock); + + return ret; } EXPORT_SYMBOL_GPL(nf_conncount_gc_list);
@@ -417,6 +428,7 @@ insert_tree(struct net *net, nf_conncount_list_init(&rbconn->list); list_add(&conn->node, &rbconn->list.head); count = 1; + rbconn->list.count = count;
rb_link_node(&rbconn->node, parent, rbnode); rb_insert_color(&rbconn->node, root);
From: Florian Westphal fw@strlen.de
[ Upstream commit 0fb39bbe43d4481fcf300d2b5822de60942fd189 ]
There is no synchronization between packet path and the configuration plane.
The packet path uses two arrays with rules, one contains the current (active) generation. The other either contains the last (obsolete) generation or the future one.
Consider: cpu1 cpu2 nft_do_chain(c); delete c net->gen++; genbit = !!net->gen; rules = c->rg[genbit];
cpu1 ignores c when updating if c is not active anymore in the new generation.
On cpu2, we now use rules from wrong generation, as c->rg[old] contains the rules matching 'c' whereas c->rg[new] was not updated and can even point to rules that have been free'd already, causing a crash.
To fix this, make sure that 'current' to the 'next' generation are identical for chains that are going away so that c->rg[new] will just use the matching rules even if genbit was incremented already.
Fixes: 0cbc06b3faba7 ("netfilter: nf_tables: remove synchronize_rcu in commit phase") Signed-off-by: Florian Westphal fw@strlen.de Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/nf_tables_api.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-)
diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 2cfb173cd0b2..4c016b49fe2b 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -6277,7 +6277,7 @@ static void nf_tables_commit_chain_free_rules_old(struct nft_rule **rules) call_rcu(&old->h, __nf_tables_commit_chain_free_rules_old); }
-static void nf_tables_commit_chain_active(struct net *net, struct nft_chain *chain) +static void nf_tables_commit_chain(struct net *net, struct nft_chain *chain) { struct nft_rule **g0, **g1; bool next_genbit; @@ -6363,11 +6363,8 @@ static int nf_tables_commit(struct net *net, struct sk_buff *skb)
/* step 2. Make rules_gen_X visible to packet path */ list_for_each_entry(table, &net->nft.tables, list) { - list_for_each_entry(chain, &table->chains, list) { - if (!nft_is_active_next(net, chain)) - continue; - nf_tables_commit_chain_active(net, chain); - } + list_for_each_entry(chain, &table->chains, list) + nf_tables_commit_chain(net, chain); }
/*
From: Florian Westphal fw@strlen.de
[ Upstream commit 25d8bcedbf4329895dbaf9dd67baa6f18dad918c ]
Start flood ping for each cpu while loading/flushing rulesets to make sure we do not access already-free'd rules from nf_tables evaluation loop.
Also add this to TARGETS so 'make run_tests' in selftest dir runs it automatically.
This would have caught the bug fixed in previous change ("netfilter: nf_tables: do not skip inactive chains during generation update") sooner.
Signed-off-by: Florian Westphal fw@strlen.de Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/Makefile | 1 + tools/testing/selftests/netfilter/Makefile | 6 ++ tools/testing/selftests/netfilter/config | 2 + .../selftests/netfilter/nft_trans_stress.sh | 78 +++++++++++++++++++ 4 files changed, 87 insertions(+) create mode 100644 tools/testing/selftests/netfilter/Makefile create mode 100644 tools/testing/selftests/netfilter/config create mode 100755 tools/testing/selftests/netfilter/nft_trans_stress.sh
diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index f1fe492c8e17..f0017c831e57 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -24,6 +24,7 @@ TARGETS += memory-hotplug TARGETS += mount TARGETS += mqueue TARGETS += net +TARGETS += netfilter TARGETS += nsfs TARGETS += powerpc TARGETS += proc diff --git a/tools/testing/selftests/netfilter/Makefile b/tools/testing/selftests/netfilter/Makefile new file mode 100644 index 000000000000..47ed6cef93fb --- /dev/null +++ b/tools/testing/selftests/netfilter/Makefile @@ -0,0 +1,6 @@ +# SPDX-License-Identifier: GPL-2.0 +# Makefile for netfilter selftests + +TEST_PROGS := nft_trans_stress.sh + +include ../lib.mk diff --git a/tools/testing/selftests/netfilter/config b/tools/testing/selftests/netfilter/config new file mode 100644 index 000000000000..1017313e41a8 --- /dev/null +++ b/tools/testing/selftests/netfilter/config @@ -0,0 +1,2 @@ +CONFIG_NET_NS=y +NF_TABLES_INET=y diff --git a/tools/testing/selftests/netfilter/nft_trans_stress.sh b/tools/testing/selftests/netfilter/nft_trans_stress.sh new file mode 100755 index 000000000000..f1affd12c4b1 --- /dev/null +++ b/tools/testing/selftests/netfilter/nft_trans_stress.sh @@ -0,0 +1,78 @@ +#!/bin/bash +# +# This test is for stress-testing the nf_tables config plane path vs. +# packet path processing: Make sure we never release rules that are +# still visible to other cpus. +# +# set -e + +# Kselftest framework requirement - SKIP code is 4. +ksft_skip=4 + +testns=testns1 +tables="foo bar baz quux" + +nft --version > /dev/null 2>&1 +if [ $? -ne 0 ];then + echo "SKIP: Could not run test without nft tool" + exit $ksft_skip +fi + +ip -Version > /dev/null 2>&1 +if [ $? -ne 0 ];then + echo "SKIP: Could not run test without ip tool" + exit $ksft_skip +fi + +tmp=$(mktemp) + +for table in $tables; do + echo add table inet "$table" >> "$tmp" + echo flush table inet "$table" >> "$tmp" + + echo "add chain inet $table INPUT { type filter hook input priority 0; }" >> "$tmp" + echo "add chain inet $table OUTPUT { type filter hook output priority 0; }" >> "$tmp" + for c in $(seq 1 400); do + chain=$(printf "chain%03u" "$c") + echo "add chain inet $table $chain" >> "$tmp" + done + + for c in $(seq 1 400); do + chain=$(printf "chain%03u" "$c") + for BASE in INPUT OUTPUT; do + echo "add rule inet $table $BASE counter jump $chain" >> "$tmp" + done + echo "add rule inet $table $chain counter return" >> "$tmp" + done +done + +ip netns add "$testns" +ip -netns "$testns" link set lo up + +lscpu | grep ^CPU(s): | ( read cpu cpunum ; +cpunum=$((cpunum-1)) +for i in $(seq 0 $cpunum);do + mask=$(printf 0x%x $((1<<$i))) + ip netns exec "$testns" taskset $mask ping -4 127.0.0.1 -fq > /dev/null & + ip netns exec "$testns" taskset $mask ping -6 ::1 -fq > /dev/null & +done) + +sleep 1 + +for i in $(seq 1 10) ; do ip netns exec "$testns" nft -f "$tmp" & done + +for table in $tables;do + randsleep=$((RANDOM%10)) + sleep $randsleep + ip netns exec "$testns" nft delete table inet $table 2>/dev/null +done + +randsleep=$((RANDOM%10)) +sleep $randsleep + +pkill -9 ping + +wait + +rm -f "$tmp" +ip netns del "$testns"
From: Jiri Olsa jolsa@kernel.org
[ Upstream commit fb50c09e923870a358d68b0d58891bd145b8d7c7 ]
Adam reported a record command crash for simple session like:
$ perf record -e cpu-clock ls
with following backtrace:
Program received signal SIGSEGV, Segmentation fault. 3543 ev = event_update_event__new(size + 1, PERF_EVENT_UPDATE__UNIT, evsel->id[0]); (gdb) bt #0 perf_event__synthesize_event_update_unit #1 0x000000000051e469 in perf_event__synthesize_extra_attr #2 0x00000000004445cb in record__synthesize #3 0x0000000000444bc5 in __cmd_record ...
We synthesize an update event that needs to touch the evsel id array, which is not defined at that time. Fix this by forcing the id allocation for events with their unit defined.
Reflecting possible read_format ID bit in the attr tests.
Reported-by: Yongxin Liu yongxin.liu@outlook.com Signed-off-by: Jiri Olsa jolsa@kernel.org Cc: Adam Lee leeadamrobert@gmail.com Cc: Alexander Shishkin alexander.shishkin@linux.intel.com Cc: Namhyung Kim namhyung@kernel.org Cc: Peter Zijlstra peterz@infradead.org Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=201477 Fixes: bfd8f72c2778 ("perf record: Synthesize unit/scale/... in event update") Link: http://lkml.kernel.org/r/20181112130012.5424-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/perf/tests/attr/base-record | 2 +- tools/perf/util/evsel.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/tools/perf/tests/attr/base-record b/tools/perf/tests/attr/base-record index 37940665f736..efd0157b9d22 100644 --- a/tools/perf/tests/attr/base-record +++ b/tools/perf/tests/attr/base-record @@ -9,7 +9,7 @@ size=112 config=0 sample_period=* sample_type=263 -read_format=0 +read_format=0|4 disabled=1 inherit=1 pinned=0 diff --git a/tools/perf/util/evsel.c b/tools/perf/util/evsel.c index 03a72310315f..e7dbdcc8d465 100644 --- a/tools/perf/util/evsel.c +++ b/tools/perf/util/evsel.c @@ -1088,7 +1088,7 @@ void perf_evsel__config(struct perf_evsel *evsel, struct record_opts *opts, attr->exclude_user = 1; }
- if (evsel->own_cpus) + if (evsel->own_cpus || evsel->unit) evsel->attr.read_format |= PERF_FORMAT_ID;
/*
From: Taehee Yoo ap420073@gmail.com
[ Upstream commit 0fbcc5b568edab7d848b7c7fa66d44ffbd4133c0 ]
xt_rateest_net_exit() was added to check whether rules are flushed successfully. but ->net_exit() callback is called earlier than ->destroy() callback. So that ->net_exit() callback can't check that.
test commands: %ip netns add vm1 %ip netns exec vm1 iptables -t mangle -I PREROUTING -p udp \ --dport 1111 -j RATEEST --rateest-name ap \ --rateest-interval 250ms --rateest-ewma 0.5s %ip netns del vm1
splat looks like: [ 668.813518] WARNING: CPU: 0 PID: 87 at net/netfilter/xt_RATEEST.c:210 xt_rateest_net_exit+0x210/0x340 [xt_RATEEST] [ 668.813518] Modules linked in: xt_RATEEST xt_tcpudp iptable_mangle bpfilter ip_tables x_tables [ 668.813518] CPU: 0 PID: 87 Comm: kworker/u4:2 Not tainted 4.19.0-rc7+ #21 [ 668.813518] Workqueue: netns cleanup_net [ 668.813518] RIP: 0010:xt_rateest_net_exit+0x210/0x340 [xt_RATEEST] [ 668.813518] Code: 00 48 8b 85 30 ff ff ff 4c 8b 23 80 38 00 0f 85 24 01 00 00 48 8b 85 30 ff ff ff 4d 85 e4 4c 89 a5 58 ff ff ff c6 00 f8 74 b2 <0f> 0b 48 83 c3 08 4c 39 f3 75 b0 48 b8 00 00 00 00 00 fc ff df 49 [ 668.813518] RSP: 0018:ffff8801156c73f8 EFLAGS: 00010282 [ 668.813518] RAX: ffffed0022ad8e85 RBX: ffff880118928e98 RCX: 5db8012a00000000 [ 668.813518] RDX: ffff8801156c7428 RSI: 00000000cb1d185f RDI: ffff880115663b74 [ 668.813518] RBP: ffff8801156c74d0 R08: ffff8801156633c0 R09: 1ffff100236440be [ 668.813518] R10: 0000000000000001 R11: ffffed002367d852 R12: ffff880115142b08 [ 668.813518] R13: 1ffff10022ad8e81 R14: ffff880118928ea8 R15: dffffc0000000000 [ 668.813518] FS: 0000000000000000(0000) GS:ffff88011b200000(0000) knlGS:0000000000000000 [ 668.813518] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 668.813518] CR2: 0000563aa69f4f28 CR3: 0000000105a16000 CR4: 00000000001006f0 [ 668.813518] Call Trace: [ 668.813518] ? unregister_netdevice_many+0xe0/0xe0 [ 668.813518] ? xt_rateest_net_init+0x2c0/0x2c0 [xt_RATEEST] [ 668.813518] ? default_device_exit+0x1ca/0x270 [ 668.813518] ? remove_proc_entry+0x1cd/0x390 [ 668.813518] ? dev_change_net_namespace+0xd00/0xd00 [ 668.813518] ? __init_waitqueue_head+0x130/0x130 [ 668.813518] ops_exit_list.isra.10+0x94/0x140 [ 668.813518] cleanup_net+0x45b/0x900 [ 668.813518] ? net_drop_ns+0x110/0x110 [ 668.813518] ? swapgs_restore_regs_and_return_to_usermode+0x3c/0x80 [ 668.813518] ? save_trace+0x300/0x300 [ 668.813518] ? lock_acquire+0x196/0x470 [ 668.813518] ? lock_acquire+0x196/0x470 [ 668.813518] ? process_one_work+0xb60/0x1de0 [ 668.813518] ? _raw_spin_unlock_irq+0x29/0x40 [ 668.813518] ? _raw_spin_unlock_irq+0x29/0x40 [ 668.813518] ? __lock_acquire+0x4500/0x4500 [ 668.813518] ? __lock_is_held+0xb4/0x140 [ 668.813518] process_one_work+0xc13/0x1de0 [ 668.813518] ? pwq_dec_nr_in_flight+0x3c0/0x3c0 [ 668.813518] ? set_load_weight+0x270/0x270 [ ... ]
Fixes: 3427b2ab63fa ("netfilter: make xt_rateest hash table per net") Signed-off-by: Taehee Yoo ap420073@gmail.com Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/xt_RATEEST.c | 10 ---------- 1 file changed, 10 deletions(-)
diff --git a/net/netfilter/xt_RATEEST.c b/net/netfilter/xt_RATEEST.c index dec843cadf46..9e05c86ba5c4 100644 --- a/net/netfilter/xt_RATEEST.c +++ b/net/netfilter/xt_RATEEST.c @@ -201,18 +201,8 @@ static __net_init int xt_rateest_net_init(struct net *net) return 0; }
-static void __net_exit xt_rateest_net_exit(struct net *net) -{ - struct xt_rateest_net *xn = net_generic(net, xt_rateest_id); - int i; - - for (i = 0; i < ARRAY_SIZE(xn->hash); i++) - WARN_ON_ONCE(!hlist_empty(&xn->hash[i])); -} - static struct pernet_operations xt_rateest_net_ops = { .init = xt_rateest_net_init, - .exit = xt_rateest_net_exit, .id = &xt_rateest_id, .size = sizeof(struct xt_rateest_net), };
From: Florian Westphal fw@strlen.de
[ Upstream commit 29e3880109e357fdc607b4393f8308cef6af9413 ]
nft_compat ops do not have static storage duration, unlike all other expressions.
When nf_tables_expr_destroy() returns, expr->ops might have been free'd already, so we need to store next address before calling expression destructor.
For same reason, we can't deref match pointer after nft_xt_put().
This can be easily reproduced by adding msleep() before nft_match_destroy() returns.
Fixes: 0ca743a55991 ("netfilter: nf_tables: add compatibility layer for x_tables") Reported-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Florian Westphal fw@strlen.de Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/nf_tables_api.c | 5 +++-- net/netfilter/nft_compat.c | 3 ++- 2 files changed, 5 insertions(+), 3 deletions(-)
diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 4c016b49fe2b..06ed55cef962 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -2432,7 +2432,7 @@ static int nf_tables_getrule(struct net *net, struct sock *nlsk, static void nf_tables_rule_destroy(const struct nft_ctx *ctx, struct nft_rule *rule) { - struct nft_expr *expr; + struct nft_expr *expr, *next;
lockdep_assert_held(&ctx->net->nft.commit_mutex); /* @@ -2441,8 +2441,9 @@ static void nf_tables_rule_destroy(const struct nft_ctx *ctx, */ expr = nft_expr_first(rule); while (expr != nft_expr_last(rule) && expr->ops) { + next = nft_expr_next(expr); nf_tables_expr_destroy(ctx, expr); - expr = nft_expr_next(expr); + expr = next; } kfree(rule); } diff --git a/net/netfilter/nft_compat.c b/net/netfilter/nft_compat.c index ad2fe6a7e47d..29d6fc73caf9 100644 --- a/net/netfilter/nft_compat.c +++ b/net/netfilter/nft_compat.c @@ -501,6 +501,7 @@ __nft_match_destroy(const struct nft_ctx *ctx, const struct nft_expr *expr, void *info) { struct xt_match *match = expr->ops->data; + struct module *me = match->me; struct xt_mtdtor_param par;
par.net = ctx->net; @@ -511,7 +512,7 @@ __nft_match_destroy(const struct nft_ctx *ctx, const struct nft_expr *expr, par.match->destroy(&par);
if (nft_xt_put(container_of(expr->ops, struct nft_xt, ops))) - module_put(match->me); + module_put(me); }
static void
From: Eric Farman farman@linux.ibm.com
[ Upstream commit 806212f91c874b24cf9eb4a9f180323671b6c5ed ]
If pfn_array_alloc fails somehow, we need to release the pfn_array_table that was malloc'd earlier.
Signed-off-by: Eric Farman farman@linux.ibm.com Message-Id: 20181109023937.96105-2-farman@linux.ibm.com Acked-by: Halil Pasic pasic@linux.ibm.com Signed-off-by: Cornelia Huck cohuck@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/s390/cio/vfio_ccw_cp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/s390/cio/vfio_ccw_cp.c b/drivers/s390/cio/vfio_ccw_cp.c index fd77e46eb3b2..ef5ab45d94b3 100644 --- a/drivers/s390/cio/vfio_ccw_cp.c +++ b/drivers/s390/cio/vfio_ccw_cp.c @@ -528,7 +528,7 @@ static int ccwchain_fetch_direct(struct ccwchain *chain,
ret = pfn_array_alloc_pin(pat->pat_pa, cp->mdev, ccw->cda, ccw->count); if (ret < 0) - goto out_init; + goto out_unpin;
/* Translate this direct ccw to a idal ccw. */ idaws = kcalloc(ret, sizeof(*idaws), GFP_DMA | GFP_KERNEL);
From: Eric Farman farman@linux.ibm.com
[ Upstream commit b89e242eee8d4cd8261d8d821c62c5d1efc454d0 ]
Direct returns from within a loop are rude, but it doesn't mean it gets to avoid releasing the memory acquired beforehand.
Signed-off-by: Eric Farman farman@linux.ibm.com Message-Id: 20181109023937.96105-3-farman@linux.ibm.com Reviewed-by: Farhan Ali alifm@linux.ibm.com Reviewed-by: Pierre Morel pmorel@linux.ibm.com Acked-by: Halil Pasic pasic@linux.ibm.com Signed-off-by: Cornelia Huck cohuck@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/s390/cio/vfio_ccw_cp.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/s390/cio/vfio_ccw_cp.c b/drivers/s390/cio/vfio_ccw_cp.c index ef5ab45d94b3..70a006ba4d05 100644 --- a/drivers/s390/cio/vfio_ccw_cp.c +++ b/drivers/s390/cio/vfio_ccw_cp.c @@ -387,8 +387,10 @@ static int ccwchain_calc_length(u64 iova, struct channel_program *cp) * orb specified one of the unsupported formats, we defer * checking for IDAWs in unsupported formats to here. */ - if ((!cp->orb.cmd.c64 || cp->orb.cmd.i2k) && ccw_is_idal(ccw)) + if ((!cp->orb.cmd.c64 || cp->orb.cmd.i2k) && ccw_is_idal(ccw)) { + kfree(p); return -EOPNOTSUPP; + }
if ((!ccw_is_chain(ccw)) && (!ccw_is_tic(ccw))) break;
From: Nicolin Chen nicoleotsuka@gmail.com
[ Upstream commit 70df9ebbd82c794ddfbb49d45b337f18d5588dc2 ]
When using DT configurations, the id pointer might turn out to be NULL. Then the driver encounters NULL pointer access:
Unable to handle kernel read from unreadable memory at vaddr 00000018 [...] PC is at ina2xx_probe+0x114/0x200 LR is at ina2xx_probe+0x10c/0x200 [...] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
The reason is that i2c core returns the id pointer by matching id_table with client->name, while the client->name is actually using the name from the first string in the DT compatible list, not the best one. So i2c core would fail to match the id_table if the best matched compatible string isn't the first one, and then would return a NULL id pointer.
This probably should be fixed in i2c core. But it doesn't hurt to make the driver robust. So this patch fixes it by using the "chip" that's added to unify both DT and non-DT configurations.
Additionally, since id pointer could be null, so as id->name: ina2xx 10-0047: power monitor (null) (Rshunt = 1000 uOhm) ina2xx 10-0048: power monitor (null) (Rshunt = 10000 uOhm)
So this patch also fixes NULL name pointer, using client->name to play safe and to align with hwmon->name.
Fixes: bd0ddd4d0883 ("hwmon: (ina2xx) Add OF device ID table") Signed-off-by: Nicolin Chen nicoleotsuka@gmail.com Signed-off-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hwmon/ina2xx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/hwmon/ina2xx.c b/drivers/hwmon/ina2xx.c index 71d3445ba869..c2252cf452f5 100644 --- a/drivers/hwmon/ina2xx.c +++ b/drivers/hwmon/ina2xx.c @@ -491,7 +491,7 @@ static int ina2xx_probe(struct i2c_client *client, }
data->groups[group++] = &ina2xx_group; - if (id->driver_data == ina226) + if (chip == ina226) data->groups[group++] = &ina226_group;
hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name, @@ -500,7 +500,7 @@ static int ina2xx_probe(struct i2c_client *client, return PTR_ERR(hwmon_dev);
dev_info(dev, "power monitor %s (Rshunt = %li uOhm)\n", - id->name, data->rshunt); + client->name, data->rshunt);
return 0; }
From: Stefan Wahren stefan.wahren@i2se.com
[ Upstream commit 35fdc3902179366489a12cae4cb3ccc3b95f0afe ]
In case an under-voltage happens before probing the driver wont write the critical warning into the kernel log. So don't init of last_throttled during probe and fix this issue.
Fixes: 74d1e007915f ("hwmon: Add support for RPi voltage sensor") Reported-by: "Noralf Trønnes" noralf@tronnes.org Signed-off-by: Stefan Wahren stefan.wahren@i2se.com Signed-off-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hwmon/raspberrypi-hwmon.c | 6 ------ 1 file changed, 6 deletions(-)
diff --git a/drivers/hwmon/raspberrypi-hwmon.c b/drivers/hwmon/raspberrypi-hwmon.c index be5ba4690895..0d0457245e7d 100644 --- a/drivers/hwmon/raspberrypi-hwmon.c +++ b/drivers/hwmon/raspberrypi-hwmon.c @@ -115,7 +115,6 @@ static int rpi_hwmon_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct rpi_hwmon_data *data; - int ret;
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); if (!data) @@ -124,11 +123,6 @@ static int rpi_hwmon_probe(struct platform_device *pdev) /* Parent driver assure that firmware is correct */ data->fw = dev_get_drvdata(dev->parent);
- /* Init throttled */ - ret = rpi_firmware_property(data->fw, RPI_FIRMWARE_GET_THROTTLED, - &data->last_throttled, - sizeof(data->last_throttled)); - data->hwmon_dev = devm_hwmon_device_register_with_info(dev, "rpi_volt", data, &rpi_chip_info,
From: Katsuhiro Suzuki katsuhiro@katsuster.net
[ Upstream commit 16a8ee4c80b45984b6de1f90a49edcf336b7c621 ]
This patch adds missing prepare_sleve_config that is needed for setup the DMA slave channel for I2S.
Signed-off-by: Katsuhiro Suzuki katsuhiro@katsuster.net Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/rockchip/rockchip_pcm.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/sound/soc/rockchip/rockchip_pcm.c b/sound/soc/rockchip/rockchip_pcm.c index f77538319221..7029e0b85f9e 100644 --- a/sound/soc/rockchip/rockchip_pcm.c +++ b/sound/soc/rockchip/rockchip_pcm.c @@ -32,6 +32,7 @@ static const struct snd_pcm_hardware snd_rockchip_hardware = {
static const struct snd_dmaengine_pcm_config rk_dmaengine_pcm_config = { .pcm_hardware = &snd_rockchip_hardware, + .prepare_slave_config = snd_dmaengine_pcm_prepare_slave_config, .prealloc_buffer_size = 32 * 1024, };
From: Richard Fitzgerald rf@opensource.cirrus.com
[ Upstream commit 20e00db2f59bdddf8a8e241473ef8be94631d3ae ]
Stack memory isn't DMA-safe so it isn't safe to use either regmap_raw_read or regmap_bulk_read to read into stack memory.
The two functions to read the scratch registers were using stack memory and regmap_raw_read. It's not worth allocating memory just for this trivial read, and it isn't time-critical. A simple regmap_read for each register is sufficient.
Signed-off-by: Richard Fitzgerald rf@opensource.cirrus.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/wm_adsp.c | 37 ++++++++++++++++++++----------------- 1 file changed, 20 insertions(+), 17 deletions(-)
diff --git a/sound/soc/codecs/wm_adsp.c b/sound/soc/codecs/wm_adsp.c index f61656070225..4d3ec295679d 100644 --- a/sound/soc/codecs/wm_adsp.c +++ b/sound/soc/codecs/wm_adsp.c @@ -765,38 +765,41 @@ static unsigned int wm_adsp_region_to_reg(struct wm_adsp_region const *mem,
static void wm_adsp2_show_fw_status(struct wm_adsp *dsp) { - u16 scratch[4]; + unsigned int scratch[4]; + unsigned int addr = dsp->base + ADSP2_SCRATCH0; + unsigned int i; int ret;
- ret = regmap_raw_read(dsp->regmap, dsp->base + ADSP2_SCRATCH0, - scratch, sizeof(scratch)); - if (ret) { - adsp_err(dsp, "Failed to read SCRATCH regs: %d\n", ret); - return; + for (i = 0; i < ARRAY_SIZE(scratch); ++i) { + ret = regmap_read(dsp->regmap, addr + i, &scratch[i]); + if (ret) { + adsp_err(dsp, "Failed to read SCRATCH%u: %d\n", i, ret); + return; + } }
adsp_dbg(dsp, "FW SCRATCH 0:0x%x 1:0x%x 2:0x%x 3:0x%x\n", - be16_to_cpu(scratch[0]), - be16_to_cpu(scratch[1]), - be16_to_cpu(scratch[2]), - be16_to_cpu(scratch[3])); + scratch[0], scratch[1], scratch[2], scratch[3]); }
static void wm_adsp2v2_show_fw_status(struct wm_adsp *dsp) { - u32 scratch[2]; + unsigned int scratch[2]; int ret;
- ret = regmap_raw_read(dsp->regmap, dsp->base + ADSP2V2_SCRATCH0_1, - scratch, sizeof(scratch)); - + ret = regmap_read(dsp->regmap, dsp->base + ADSP2V2_SCRATCH0_1, + &scratch[0]); if (ret) { - adsp_err(dsp, "Failed to read SCRATCH regs: %d\n", ret); + adsp_err(dsp, "Failed to read SCRATCH0_1: %d\n", ret); return; }
- scratch[0] = be32_to_cpu(scratch[0]); - scratch[1] = be32_to_cpu(scratch[1]); + ret = regmap_read(dsp->regmap, dsp->base + ADSP2V2_SCRATCH2_3, + &scratch[1]); + if (ret) { + adsp_err(dsp, "Failed to read SCRATCH2_3: %d\n", ret); + return; + }
adsp_dbg(dsp, "FW SCRATCH 0:0x%x 1:0x%x 2:0x%x 3:0x%x\n", scratch[0] & 0xFFFF,
From: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com
[ Upstream commit 4c10473d6ddf12ec124c9ff71a5d23bb5388478b ]
On certain platforms, Display HDMI HDA codec was not going to sleep state after the use when links are powered down after turning off the display power. As per the HW recommendation, links are powered down before turning off the display power to ensure that the codec goes to sleep state.
This patch was updated from an earlier version submitted upstream [1] which conflicted with the changes merged for HDaudio codec support with the Intel DSP.
[1] https://patchwork.kernel.org/patch/10540213/
Signed-off-by: Sriram Periyasamy sriramx.periyasamy@intel.com Signed-off-by: Sanyog Kale sanyog.r.kale@intel.com Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/codecs/hdac_hdmi.c | 11 +++++------ sound/soc/intel/skylake/skl.c | 12 ++++++------ 2 files changed, 11 insertions(+), 12 deletions(-)
diff --git a/sound/soc/codecs/hdac_hdmi.c b/sound/soc/codecs/hdac_hdmi.c index 7b8533abf637..b61d518f4fef 100644 --- a/sound/soc/codecs/hdac_hdmi.c +++ b/sound/soc/codecs/hdac_hdmi.c @@ -2184,11 +2184,6 @@ static int hdac_hdmi_runtime_suspend(struct device *dev) */ snd_hdac_codec_read(hdev, hdev->afg, 0, AC_VERB_SET_POWER_STATE, AC_PWRST_D3); - err = snd_hdac_display_power(bus, false); - if (err < 0) { - dev_err(dev, "Cannot turn on display power on i915\n"); - return err; - }
hlink = snd_hdac_ext_bus_get_link(bus, dev_name(dev)); if (!hlink) { @@ -2198,7 +2193,11 @@ static int hdac_hdmi_runtime_suspend(struct device *dev)
snd_hdac_ext_bus_link_put(bus, hlink);
- return 0; + err = snd_hdac_display_power(bus, false); + if (err < 0) + dev_err(dev, "Cannot turn off display power on i915\n"); + + return err; }
static int hdac_hdmi_runtime_resume(struct device *dev) diff --git a/sound/soc/intel/skylake/skl.c b/sound/soc/intel/skylake/skl.c index 1d17be0f78a0..50f16a0f6535 100644 --- a/sound/soc/intel/skylake/skl.c +++ b/sound/soc/intel/skylake/skl.c @@ -752,6 +752,12 @@ static void skl_probe_work(struct work_struct *work) } }
+ /* + * we are done probing so decrement link counts + */ + list_for_each_entry(hlink, &bus->hlink_list, list) + snd_hdac_ext_bus_link_put(bus, hlink); + if (IS_ENABLED(CONFIG_SND_SOC_HDAC_HDMI)) { err = snd_hdac_display_power(bus, false); if (err < 0) { @@ -761,12 +767,6 @@ static void skl_probe_work(struct work_struct *work) } }
- /* - * we are done probing so decrement link counts - */ - list_for_each_entry(hlink, &bus->hlink_list, list) - snd_hdac_ext_bus_link_put(bus, hlink); - /* configure PM */ pm_runtime_put_noidle(bus->dev); pm_runtime_allow(bus->dev);
On Wed, Dec 05, 2018 at 04:34:23AM -0500, Sasha Levin wrote:
From: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com
[ Upstream commit 4c10473d6ddf12ec124c9ff71a5d23bb5388478b ]
On certain platforms, Display HDMI HDA codec was not going to sleep state after the use when links are powered down after turning off the display power. As per the HW recommendation, links are powered down before turning off the display power to ensure that the codec goes to sleep state.
Are we sure there's no dependencies here?
On 12/5/18 3:48 AM, Mark Brown wrote:
On Wed, Dec 05, 2018 at 04:34:23AM -0500, Sasha Levin wrote:
From: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com
[ Upstream commit 4c10473d6ddf12ec124c9ff71a5d23bb5388478b ]
On certain platforms, Display HDMI HDA codec was not going to sleep state after the use when links are powered down after turning off the display power. As per the HW recommendation, links are powered down before turning off the display power to ensure that the codec goes to sleep state.
Are we sure there's no dependencies here?
If you are referring to dependencies to other patches, not that I can think of. Based on timelines there isn't a strong link with 4.19: the patch was initially submitted in August (and missed), before v4.19 came out, and has also been used in 4.14 backports.
From: Rohit kumar rohitkr@codeaurora.org
[ Upstream commit 67fd1437d11620de8768b22fe20942e752ed52e9 ]
Frontend dai_link id is used for closing ADM sessions. During concurrent usecase when one session is closed, it closes other ADM session associated with other usecase too. Dai_link->id should always point to Frontend dai id. Set cpu_dai id as dai_link id to fix the issue.
Signed-off-by: Rohit kumar rohitkr@codeaurora.org Acked-by: Srinivas Kandagatla srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/qcom/common.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/sound/soc/qcom/common.c b/sound/soc/qcom/common.c index eb1b9da05dd4..4715527054e5 100644 --- a/sound/soc/qcom/common.c +++ b/sound/soc/qcom/common.c @@ -13,6 +13,7 @@ int qcom_snd_parse_of(struct snd_soc_card *card) struct device_node *cpu = NULL; struct device *dev = card->dev; struct snd_soc_dai_link *link; + struct of_phandle_args args; int ret, num_links;
ret = snd_soc_of_parse_card_name(card, "model"); @@ -47,12 +48,14 @@ int qcom_snd_parse_of(struct snd_soc_card *card) goto err; }
- link->cpu_of_node = of_parse_phandle(cpu, "sound-dai", 0); - if (!link->cpu_of_node) { + ret = of_parse_phandle_with_args(cpu, "sound-dai", + "#sound-dai-cells", 0, &args); + if (ret) { dev_err(card->dev, "error getting cpu phandle\n"); - ret = -EINVAL; goto err; } + link->cpu_of_node = args.np; + link->id = args.args[0];
ret = snd_soc_of_get_dai_name(cpu, &link->cpu_dai_name); if (ret) {
From: Thomas Richter tmricht@linux.ibm.com
[ Upstream commit 613a41b0d16e617f46776a93b975a1eeea96417c ]
On s390 command perf top fails [root@s35lp76 perf] # ./perf top -F100000 --stdio Error: cycles: PMU Hardware doesn't support sampling/overflow-interrupts. Try 'perf stat' [root@s35lp76 perf] #
Using event -e rb0000 works as designed. Event rb0000 is the event number of the sampling facility for basic sampling.
During system start up the following PMUs are installed in the kernel's PMU list (from head to tail): cpum_cf --> s390 PMU counter facility device driver cpum_sf --> s390 PMU sampling facility device driver uprobe kprobe tracepoint task_clock cpu_clock
Perf top executes following functions and calls perf_event_open(2) system call with different parameters many times:
cmd_top --> __cmd_top --> perf_evlist__add_default --> __perf_evlist__add_default --> perf_evlist__new_cycles (creates event type:0 (HW) config 0 (CPU_CYCLES) --> perf_event_attr__set_max_precise_ip Uses perf_event_open(2) to detect correct precise_ip level. Fails 3 times on s390 which is ok.
Then functions cmd_top --> __cmd_top --> perf_top__start_counters -->perf_evlist__config --> perf_can_comm_exec --> perf_probe_api This functions test support for the following events: "cycles:u", "instructions:u", "cpu-clock:u" using --> perf_do_probe_api --> perf_event_open_cloexec Test the close on exec flag support with perf_event_open(2). perf_do_probe_api returns true if the event is supported. The function returns true because event cpu-clock is supported by the PMU cpu_clock. This is achieved by many calls to perf_event_open(2).
Function perf_top__start_counters now calls perf_evsel__open() for every event, which is the default event cpu_cycles (config:0) and type HARDWARE (type:0) which a predfined frequence of 4000.
Given the above order of the PMU list, the PMU cpum_cf gets called first and returns 0, which indicates support for this sampling. The event is fully allocated in the function perf_event_open (file kernel/event/core.c near line 10521 and the following check fails:
event = perf_event_alloc(&attr, cpu, task, group_leader, NULL, NULL, NULL, cgroup_fd); if (IS_ERR(event)) { err = PTR_ERR(event); goto err_cred; }
if (is_sampling_event(event)) { if (event->pmu->capabilities & PERF_PMU_CAP_NO_INTERRUPT) { err = -EOPNOTSUPP; goto err_alloc; } }
The check for the interrupt capabilities fails and the system call perf_event_open() returns -EOPNOTSUPP (-95).
Add a check to return -ENODEV when sampling is requested in PMU cpum_cf. This allows common kernel code in the perf_event_open() system call to test the next PMU in above list.
Fixes: 97b1198fece0 (" "s390, perf: Use common PMU interrupt disabled code") Signed-off-by: Thomas Richter tmricht@linux.ibm.com Reviewed-by: Hendrik Brueckner brueckner@linux.ibm.com Signed-off-by: Martin Schwidefsky schwidefsky@de.ibm.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/s390/kernel/perf_cpum_cf.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/arch/s390/kernel/perf_cpum_cf.c b/arch/s390/kernel/perf_cpum_cf.c index 74091fd3101e..d5523adeddbf 100644 --- a/arch/s390/kernel/perf_cpum_cf.c +++ b/arch/s390/kernel/perf_cpum_cf.c @@ -346,6 +346,8 @@ static int __hw_perf_event_init(struct perf_event *event) break;
case PERF_TYPE_HARDWARE: + if (is_sampling_event(event)) /* No sampling support */ + return -ENOENT; ev = attr->config; /* Count user space (problem-state) only */ if (!attr->exclude_user && attr->exclude_kernel) {
From: Nicolin Chen nicoleotsuka@gmail.com
[ Upstream commit 38cd989ee38c16388cde89db5b734f9d55b905f9 ]
The current register (04h) has a sign bit at MSB. The comments for this calculation also mention that it's a signed register.
However, the regval is unsigned type so result of calculation turns out to be an incorrect value when current is negative.
This patch simply fixes this by adding a casting to s16.
Fixes: 5d389b125186c ("hwmon: (ina2xx) Make calibration register value fixed") Signed-off-by: Nicolin Chen nicoleotsuka@gmail.com Signed-off-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hwmon/ina2xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/hwmon/ina2xx.c b/drivers/hwmon/ina2xx.c index c2252cf452f5..07ee19573b3f 100644 --- a/drivers/hwmon/ina2xx.c +++ b/drivers/hwmon/ina2xx.c @@ -274,7 +274,7 @@ static int ina2xx_get_value(struct ina2xx_data *data, u8 reg, break; case INA2XX_CURRENT: /* signed register, result in mA */ - val = regval * data->current_lsb_uA; + val = (s16)regval * data->current_lsb_uA; val = DIV_ROUND_CLOSEST(val, 1000); break; case INA2XX_CALIBRATION:
From: Peter Ujfalusi peter.ujfalusi@ti.com
[ Upstream commit 76836fd354922ebe4798a64fda01f8dc6a8b0984 ]
The machine driver fails to probe in next-20181113 with:
[ 2.539093] omap-abe-twl6040 sound: ASoC: CODEC DAI twl6040-legacy not registered [ 2.546630] omap-abe-twl6040 sound: devm_snd_soc_register_card() failed: -517 ... [ 3.693206] omap-abe-twl6040 sound: ASoC: Both platform name/of_node are set for TWL6040 [ 3.701446] omap-abe-twl6040 sound: ASoC: failed to init link TWL6040 [ 3.708007] omap-abe-twl6040 sound: devm_snd_soc_register_card() failed: -22 [ 3.715148] omap-abe-twl6040: probe of sound failed with error -22
Bisect pointed to a merge commit: first bad commit: [0f688ab20a540aafa984c5dbd68a71debebf4d7f] Merge remote-tracking branch 'net-next/master'
and a diff between a working kernel does not reveal anything which would explain the change in behavior.
Further investigation showed that on the second try of loading fails because the dai_link->platform is no longer NULL and it might be pointing to uninitialized memory.
The fix is to move the snd_soc_dai_link and snd_soc_card inside of the abe_twl6040 struct, which is dynamically allocated every time the driver probes.
Signed-off-by: Peter Ujfalusi peter.ujfalusi@ti.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/omap/omap-abe-twl6040.c | 67 +++++++++++++------------------ 1 file changed, 29 insertions(+), 38 deletions(-)
diff --git a/sound/soc/omap/omap-abe-twl6040.c b/sound/soc/omap/omap-abe-twl6040.c index d5ae9eb8c756..fed45b41f9d3 100644 --- a/sound/soc/omap/omap-abe-twl6040.c +++ b/sound/soc/omap/omap-abe-twl6040.c @@ -36,6 +36,8 @@ #include "../codecs/twl6040.h"
struct abe_twl6040 { + struct snd_soc_card card; + struct snd_soc_dai_link dai_links[2]; int jack_detection; /* board can detect jack events */ int mclk_freq; /* MCLK frequency speed for twl6040 */ }; @@ -208,40 +210,10 @@ static int omap_abe_dmic_init(struct snd_soc_pcm_runtime *rtd) ARRAY_SIZE(dmic_audio_map)); }
-/* Digital audio interface glue - connects codec <--> CPU */ -static struct snd_soc_dai_link abe_twl6040_dai_links[] = { - { - .name = "TWL6040", - .stream_name = "TWL6040", - .codec_dai_name = "twl6040-legacy", - .codec_name = "twl6040-codec", - .init = omap_abe_twl6040_init, - .ops = &omap_abe_ops, - }, - { - .name = "DMIC", - .stream_name = "DMIC Capture", - .codec_dai_name = "dmic-hifi", - .codec_name = "dmic-codec", - .init = omap_abe_dmic_init, - .ops = &omap_abe_dmic_ops, - }, -}; - -/* Audio machine driver */ -static struct snd_soc_card omap_abe_card = { - .owner = THIS_MODULE, - - .dapm_widgets = twl6040_dapm_widgets, - .num_dapm_widgets = ARRAY_SIZE(twl6040_dapm_widgets), - .dapm_routes = audio_map, - .num_dapm_routes = ARRAY_SIZE(audio_map), -}; - static int omap_abe_probe(struct platform_device *pdev) { struct device_node *node = pdev->dev.of_node; - struct snd_soc_card *card = &omap_abe_card; + struct snd_soc_card *card; struct device_node *dai_node; struct abe_twl6040 *priv; int num_links = 0; @@ -252,12 +224,18 @@ static int omap_abe_probe(struct platform_device *pdev) return -ENODEV; }
- card->dev = &pdev->dev; - priv = devm_kzalloc(&pdev->dev, sizeof(struct abe_twl6040), GFP_KERNEL); if (priv == NULL) return -ENOMEM;
+ card = &priv->card; + card->dev = &pdev->dev; + card->owner = THIS_MODULE; + card->dapm_widgets = twl6040_dapm_widgets; + card->num_dapm_widgets = ARRAY_SIZE(twl6040_dapm_widgets); + card->dapm_routes = audio_map; + card->num_dapm_routes = ARRAY_SIZE(audio_map); + if (snd_soc_of_parse_card_name(card, "ti,model")) { dev_err(&pdev->dev, "Card name is not provided\n"); return -ENODEV; @@ -274,14 +252,27 @@ static int omap_abe_probe(struct platform_device *pdev) dev_err(&pdev->dev, "McPDM node is not provided\n"); return -EINVAL; } - abe_twl6040_dai_links[0].cpu_of_node = dai_node; - abe_twl6040_dai_links[0].platform_of_node = dai_node; + + priv->dai_links[0].name = "DMIC"; + priv->dai_links[0].stream_name = "TWL6040"; + priv->dai_links[0].cpu_of_node = dai_node; + priv->dai_links[0].platform_of_node = dai_node; + priv->dai_links[0].codec_dai_name = "twl6040-legacy"; + priv->dai_links[0].codec_name = "twl6040-codec"; + priv->dai_links[0].init = omap_abe_twl6040_init; + priv->dai_links[0].ops = &omap_abe_ops;
dai_node = of_parse_phandle(node, "ti,dmic", 0); if (dai_node) { num_links = 2; - abe_twl6040_dai_links[1].cpu_of_node = dai_node; - abe_twl6040_dai_links[1].platform_of_node = dai_node; + priv->dai_links[1].name = "TWL6040"; + priv->dai_links[1].stream_name = "DMIC Capture"; + priv->dai_links[1].cpu_of_node = dai_node; + priv->dai_links[1].platform_of_node = dai_node; + priv->dai_links[1].codec_dai_name = "dmic-hifi"; + priv->dai_links[1].codec_name = "dmic-codec"; + priv->dai_links[1].init = omap_abe_dmic_init; + priv->dai_links[1].ops = &omap_abe_dmic_ops; } else { num_links = 1; } @@ -300,7 +291,7 @@ static int omap_abe_probe(struct platform_device *pdev) return -ENODEV; }
- card->dai_link = abe_twl6040_dai_links; + card->dai_link = priv->dai_links; card->num_links = num_links;
snd_soc_card_set_drvdata(card, priv);
From: Tzung-Bi Shih tzungbi@google.com
[ Upstream commit 882eab6c28d23a970ae73b7eb831b169a672d456 ]
Audio map are possible in wrong state before card->instantiated has been set to true. Imaging the following examples:
time 1: at the beginning
in:-1 in:-1 in:-1 in:-1 out:-1 out:-1 out:-1 out:-1 SIGGEN A B Spk
time 2: after someone called snd_soc_dapm_new_widgets() (e.g. create_fill_widget_route_map() in sound/soc/codecs/hdac_hdmi.c)
in:1 in:0 in:0 in:0 out:0 out:0 out:0 out:1 SIGGEN A B Spk
time 3: routes added
in:1 in:0 in:0 in:0 out:0 out:0 out:0 out:1 SIGGEN -----> A -----> B ---> Spk
In the end, the path should be powered on but it did not. At time 3, "in" of SIGGEN and "out" of Spk did not propagate to their neighbors because snd_soc_dapm_add_path() will not invalidate the paths if the card has not instantiated (i.e. card->instantiated is false). To correct the state of audio map, recalculate the whole map forcely.
Signed-off-by: Tzung-Bi Shih tzungbi@google.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/soc-core.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index 473eefe8658e..62aa320c2070 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -2126,6 +2126,7 @@ static int snd_soc_instantiate_card(struct snd_soc_card *card) }
card->instantiated = 1; + dapm_mark_endpoints_dirty(card); snd_soc_dapm_sync(&card->dapm); mutex_unlock(&card->mutex); mutex_unlock(&client_mutex);
From: Tony Lindgren tony@atomide.com
[ Upstream commit 91b9deefedf4c35a01027ce38bed7299605026a3 ]
I've been wondering still about omap2-mcspi related suspend and resume flakeyness and looks like we're missing calls to spi_master_suspend() and spi_master_resume(). Adding those and using pm_runtime_force_suspend() and pm_runtime_force_resume() makes things work for suspend and resume and allows us to stop using noirq suspend and resume.
And while at it, let's use SET_SYSTEM_SLEEP_PM_OPS to simplify things further.
Signed-off-by: Tony Lindgren tony@atomide.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-omap2-mcspi.c | 37 +++++++++++++++++++++++------------ 1 file changed, 25 insertions(+), 12 deletions(-)
diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c index 508c61c669e7..e2be7da74343 100644 --- a/drivers/spi/spi-omap2-mcspi.c +++ b/drivers/spi/spi-omap2-mcspi.c @@ -1455,13 +1455,26 @@ static int omap2_mcspi_remove(struct platform_device *pdev) /* work with hotplug and coldplug */ MODULE_ALIAS("platform:omap2_mcspi");
-#ifdef CONFIG_SUSPEND -static int omap2_mcspi_suspend_noirq(struct device *dev) +static int __maybe_unused omap2_mcspi_suspend(struct device *dev) { - return pinctrl_pm_select_sleep_state(dev); + struct spi_master *master = dev_get_drvdata(dev); + struct omap2_mcspi *mcspi = spi_master_get_devdata(master); + int error; + + error = pinctrl_pm_select_sleep_state(dev); + if (error) + dev_warn(mcspi->dev, "%s: failed to set pins: %i\n", + __func__, error); + + error = spi_master_suspend(master); + if (error) + dev_warn(mcspi->dev, "%s: master suspend failed: %i\n", + __func__, error); + + return pm_runtime_force_suspend(dev); }
-static int omap2_mcspi_resume_noirq(struct device *dev) +static int __maybe_unused omap2_mcspi_resume(struct device *dev) { struct spi_master *master = dev_get_drvdata(dev); struct omap2_mcspi *mcspi = spi_master_get_devdata(master); @@ -1472,17 +1485,17 @@ static int omap2_mcspi_resume_noirq(struct device *dev) dev_warn(mcspi->dev, "%s: failed to set pins: %i\n", __func__, error);
- return 0; -} + error = spi_master_resume(master); + if (error) + dev_warn(mcspi->dev, "%s: master resume failed: %i\n", + __func__, error);
-#else -#define omap2_mcspi_suspend_noirq NULL -#define omap2_mcspi_resume_noirq NULL -#endif + return pm_runtime_force_resume(dev); +}
static const struct dev_pm_ops omap2_mcspi_pm_ops = { - .suspend_noirq = omap2_mcspi_suspend_noirq, - .resume_noirq = omap2_mcspi_resume_noirq, + SET_SYSTEM_SLEEP_PM_OPS(omap2_mcspi_suspend, + omap2_mcspi_resume) .runtime_resume = omap_mcspi_runtime_resume, };
From: Hans de Goede hdegoede@redhat.com
[ Upstream commit 0145b50566e7de5637e80ecba96c7f0e6fff1aad ]
Before this commit sensor_hub_input_attr_get_raw_value() failed to take the signedness of 16 and 8 bit values into account, returning e.g. 65436 instead of -100 for the z-axis reading of an accelerometer.
This commit adds a new is_signed parameter to the function and makes all callers pass the appropriate value for this.
While at it, this commit also fixes up some neighboring lines where statements were needlessly split over 2 lines to improve readability.
Signed-off-by: Hans de Goede hdegoede@redhat.com Acked-by: Srinivas Pandruvada srinivas.pandruvada@linux.intel.com Acked-by: Benjamin Tissoires benjamin.tissoires@redhat.com Cc: Stable@vger.kernel.org Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hid/hid-sensor-custom.c | 2 +- drivers/hid/hid-sensor-hub.c | 13 ++++++++++--- drivers/iio/accel/hid-sensor-accel-3d.c | 5 ++++- drivers/iio/gyro/hid-sensor-gyro-3d.c | 5 ++++- drivers/iio/humidity/hid-sensor-humidity.c | 3 ++- drivers/iio/light/hid-sensor-als.c | 8 +++++--- drivers/iio/light/hid-sensor-prox.c | 8 +++++--- drivers/iio/magnetometer/hid-sensor-magn-3d.c | 8 +++++--- drivers/iio/orientation/hid-sensor-incl-3d.c | 8 +++++--- drivers/iio/pressure/hid-sensor-press.c | 8 +++++--- drivers/iio/temperature/hid-sensor-temperature.c | 3 ++- drivers/rtc/rtc-hid-sensor-time.c | 2 +- include/linux/hid-sensor-hub.h | 4 +++- 13 files changed, 52 insertions(+), 25 deletions(-)
diff --git a/drivers/hid/hid-sensor-custom.c b/drivers/hid/hid-sensor-custom.c index e8a114157f87..bb012bc032e0 100644 --- a/drivers/hid/hid-sensor-custom.c +++ b/drivers/hid/hid-sensor-custom.c @@ -358,7 +358,7 @@ static ssize_t show_value(struct device *dev, struct device_attribute *attr, sensor_inst->hsdev, sensor_inst->hsdev->usage, usage, report_id, - SENSOR_HUB_SYNC); + SENSOR_HUB_SYNC, false); } else if (!strncmp(name, "units", strlen("units"))) value = sensor_inst->fields[field_index].attribute.units; else if (!strncmp(name, "unit-expo", strlen("unit-expo"))) diff --git a/drivers/hid/hid-sensor-hub.c b/drivers/hid/hid-sensor-hub.c index 2b63487057c2..4256fdc5cd6d 100644 --- a/drivers/hid/hid-sensor-hub.c +++ b/drivers/hid/hid-sensor-hub.c @@ -299,7 +299,8 @@ EXPORT_SYMBOL_GPL(sensor_hub_get_feature); int sensor_hub_input_attr_get_raw_value(struct hid_sensor_hub_device *hsdev, u32 usage_id, u32 attr_usage_id, u32 report_id, - enum sensor_hub_read_flags flag) + enum sensor_hub_read_flags flag, + bool is_signed) { struct sensor_hub_data *data = hid_get_drvdata(hsdev->hdev); unsigned long flags; @@ -331,10 +332,16 @@ int sensor_hub_input_attr_get_raw_value(struct hid_sensor_hub_device *hsdev, &hsdev->pending.ready, HZ*5); switch (hsdev->pending.raw_size) { case 1: - ret_val = *(u8 *)hsdev->pending.raw_data; + if (is_signed) + ret_val = *(s8 *)hsdev->pending.raw_data; + else + ret_val = *(u8 *)hsdev->pending.raw_data; break; case 2: - ret_val = *(u16 *)hsdev->pending.raw_data; + if (is_signed) + ret_val = *(s16 *)hsdev->pending.raw_data; + else + ret_val = *(u16 *)hsdev->pending.raw_data; break; case 4: ret_val = *(u32 *)hsdev->pending.raw_data; diff --git a/drivers/iio/accel/hid-sensor-accel-3d.c b/drivers/iio/accel/hid-sensor-accel-3d.c index 41d97faf5013..38ff374a3ca4 100644 --- a/drivers/iio/accel/hid-sensor-accel-3d.c +++ b/drivers/iio/accel/hid-sensor-accel-3d.c @@ -149,6 +149,7 @@ static int accel_3d_read_raw(struct iio_dev *indio_dev, int report_id = -1; u32 address; int ret_type; + s32 min; struct hid_sensor_hub_device *hsdev = accel_state->common_attributes.hsdev;
@@ -158,12 +159,14 @@ static int accel_3d_read_raw(struct iio_dev *indio_dev, case IIO_CHAN_INFO_RAW: hid_sensor_power_state(&accel_state->common_attributes, true); report_id = accel_state->accel[chan->scan_index].report_id; + min = accel_state->accel[chan->scan_index].logical_minimum; address = accel_3d_addresses[chan->scan_index]; if (report_id >= 0) *val = sensor_hub_input_attr_get_raw_value( accel_state->common_attributes.hsdev, hsdev->usage, address, report_id, - SENSOR_HUB_SYNC); + SENSOR_HUB_SYNC, + min < 0); else { *val = 0; hid_sensor_power_state(&accel_state->common_attributes, diff --git a/drivers/iio/gyro/hid-sensor-gyro-3d.c b/drivers/iio/gyro/hid-sensor-gyro-3d.c index 36941e69f959..88e857c4baf4 100644 --- a/drivers/iio/gyro/hid-sensor-gyro-3d.c +++ b/drivers/iio/gyro/hid-sensor-gyro-3d.c @@ -111,6 +111,7 @@ static int gyro_3d_read_raw(struct iio_dev *indio_dev, int report_id = -1; u32 address; int ret_type; + s32 min;
*val = 0; *val2 = 0; @@ -118,13 +119,15 @@ static int gyro_3d_read_raw(struct iio_dev *indio_dev, case IIO_CHAN_INFO_RAW: hid_sensor_power_state(&gyro_state->common_attributes, true); report_id = gyro_state->gyro[chan->scan_index].report_id; + min = gyro_state->gyro[chan->scan_index].logical_minimum; address = gyro_3d_addresses[chan->scan_index]; if (report_id >= 0) *val = sensor_hub_input_attr_get_raw_value( gyro_state->common_attributes.hsdev, HID_USAGE_SENSOR_GYRO_3D, address, report_id, - SENSOR_HUB_SYNC); + SENSOR_HUB_SYNC, + min < 0); else { *val = 0; hid_sensor_power_state(&gyro_state->common_attributes, diff --git a/drivers/iio/humidity/hid-sensor-humidity.c b/drivers/iio/humidity/hid-sensor-humidity.c index beab6d6fd6e1..4bc95f31c730 100644 --- a/drivers/iio/humidity/hid-sensor-humidity.c +++ b/drivers/iio/humidity/hid-sensor-humidity.c @@ -75,7 +75,8 @@ static int humidity_read_raw(struct iio_dev *indio_dev, HID_USAGE_SENSOR_HUMIDITY, HID_USAGE_SENSOR_ATMOSPHERIC_HUMIDITY, humid_st->humidity_attr.report_id, - SENSOR_HUB_SYNC); + SENSOR_HUB_SYNC, + humid_st->humidity_attr.logical_minimum < 0); hid_sensor_power_state(&humid_st->common_attributes, false);
return IIO_VAL_INT; diff --git a/drivers/iio/light/hid-sensor-als.c b/drivers/iio/light/hid-sensor-als.c index 406caaee9a3c..94f33250ba5a 100644 --- a/drivers/iio/light/hid-sensor-als.c +++ b/drivers/iio/light/hid-sensor-als.c @@ -93,6 +93,7 @@ static int als_read_raw(struct iio_dev *indio_dev, int report_id = -1; u32 address; int ret_type; + s32 min;
*val = 0; *val2 = 0; @@ -102,8 +103,8 @@ static int als_read_raw(struct iio_dev *indio_dev, case CHANNEL_SCAN_INDEX_INTENSITY: case CHANNEL_SCAN_INDEX_ILLUM: report_id = als_state->als_illum.report_id; - address = - HID_USAGE_SENSOR_LIGHT_ILLUM; + min = als_state->als_illum.logical_minimum; + address = HID_USAGE_SENSOR_LIGHT_ILLUM; break; default: report_id = -1; @@ -116,7 +117,8 @@ static int als_read_raw(struct iio_dev *indio_dev, als_state->common_attributes.hsdev, HID_USAGE_SENSOR_ALS, address, report_id, - SENSOR_HUB_SYNC); + SENSOR_HUB_SYNC, + min < 0); hid_sensor_power_state(&als_state->common_attributes, false); } else { diff --git a/drivers/iio/light/hid-sensor-prox.c b/drivers/iio/light/hid-sensor-prox.c index 45107f7537b5..cf5a0c242609 100644 --- a/drivers/iio/light/hid-sensor-prox.c +++ b/drivers/iio/light/hid-sensor-prox.c @@ -73,6 +73,7 @@ static int prox_read_raw(struct iio_dev *indio_dev, int report_id = -1; u32 address; int ret_type; + s32 min;
*val = 0; *val2 = 0; @@ -81,8 +82,8 @@ static int prox_read_raw(struct iio_dev *indio_dev, switch (chan->scan_index) { case CHANNEL_SCAN_INDEX_PRESENCE: report_id = prox_state->prox_attr.report_id; - address = - HID_USAGE_SENSOR_HUMAN_PRESENCE; + min = prox_state->prox_attr.logical_minimum; + address = HID_USAGE_SENSOR_HUMAN_PRESENCE; break; default: report_id = -1; @@ -95,7 +96,8 @@ static int prox_read_raw(struct iio_dev *indio_dev, prox_state->common_attributes.hsdev, HID_USAGE_SENSOR_PROX, address, report_id, - SENSOR_HUB_SYNC); + SENSOR_HUB_SYNC, + min < 0); hid_sensor_power_state(&prox_state->common_attributes, false); } else { diff --git a/drivers/iio/magnetometer/hid-sensor-magn-3d.c b/drivers/iio/magnetometer/hid-sensor-magn-3d.c index d55c4885211a..f3c0d41e5a8c 100644 --- a/drivers/iio/magnetometer/hid-sensor-magn-3d.c +++ b/drivers/iio/magnetometer/hid-sensor-magn-3d.c @@ -163,21 +163,23 @@ static int magn_3d_read_raw(struct iio_dev *indio_dev, int report_id = -1; u32 address; int ret_type; + s32 min;
*val = 0; *val2 = 0; switch (mask) { case IIO_CHAN_INFO_RAW: hid_sensor_power_state(&magn_state->magn_flux_attributes, true); - report_id = - magn_state->magn[chan->address].report_id; + report_id = magn_state->magn[chan->address].report_id; + min = magn_state->magn[chan->address].logical_minimum; address = magn_3d_addresses[chan->address]; if (report_id >= 0) *val = sensor_hub_input_attr_get_raw_value( magn_state->magn_flux_attributes.hsdev, HID_USAGE_SENSOR_COMPASS_3D, address, report_id, - SENSOR_HUB_SYNC); + SENSOR_HUB_SYNC, + min < 0); else { *val = 0; hid_sensor_power_state( diff --git a/drivers/iio/orientation/hid-sensor-incl-3d.c b/drivers/iio/orientation/hid-sensor-incl-3d.c index 1e5451d1ff88..bdc5e4554ee4 100644 --- a/drivers/iio/orientation/hid-sensor-incl-3d.c +++ b/drivers/iio/orientation/hid-sensor-incl-3d.c @@ -111,21 +111,23 @@ static int incl_3d_read_raw(struct iio_dev *indio_dev, int report_id = -1; u32 address; int ret_type; + s32 min;
*val = 0; *val2 = 0; switch (mask) { case IIO_CHAN_INFO_RAW: hid_sensor_power_state(&incl_state->common_attributes, true); - report_id = - incl_state->incl[chan->scan_index].report_id; + report_id = incl_state->incl[chan->scan_index].report_id; + min = incl_state->incl[chan->scan_index].logical_minimum; address = incl_3d_addresses[chan->scan_index]; if (report_id >= 0) *val = sensor_hub_input_attr_get_raw_value( incl_state->common_attributes.hsdev, HID_USAGE_SENSOR_INCLINOMETER_3D, address, report_id, - SENSOR_HUB_SYNC); + SENSOR_HUB_SYNC, + min < 0); else { hid_sensor_power_state(&incl_state->common_attributes, false); diff --git a/drivers/iio/pressure/hid-sensor-press.c b/drivers/iio/pressure/hid-sensor-press.c index 4c437918f1d2..d7b1c00ceb4d 100644 --- a/drivers/iio/pressure/hid-sensor-press.c +++ b/drivers/iio/pressure/hid-sensor-press.c @@ -77,6 +77,7 @@ static int press_read_raw(struct iio_dev *indio_dev, int report_id = -1; u32 address; int ret_type; + s32 min;
*val = 0; *val2 = 0; @@ -85,8 +86,8 @@ static int press_read_raw(struct iio_dev *indio_dev, switch (chan->scan_index) { case CHANNEL_SCAN_INDEX_PRESSURE: report_id = press_state->press_attr.report_id; - address = - HID_USAGE_SENSOR_ATMOSPHERIC_PRESSURE; + min = press_state->press_attr.logical_minimum; + address = HID_USAGE_SENSOR_ATMOSPHERIC_PRESSURE; break; default: report_id = -1; @@ -99,7 +100,8 @@ static int press_read_raw(struct iio_dev *indio_dev, press_state->common_attributes.hsdev, HID_USAGE_SENSOR_PRESSURE, address, report_id, - SENSOR_HUB_SYNC); + SENSOR_HUB_SYNC, + min < 0); hid_sensor_power_state(&press_state->common_attributes, false); } else { diff --git a/drivers/iio/temperature/hid-sensor-temperature.c b/drivers/iio/temperature/hid-sensor-temperature.c index beaf6fd3e337..b592fc4f007e 100644 --- a/drivers/iio/temperature/hid-sensor-temperature.c +++ b/drivers/iio/temperature/hid-sensor-temperature.c @@ -76,7 +76,8 @@ static int temperature_read_raw(struct iio_dev *indio_dev, HID_USAGE_SENSOR_TEMPERATURE, HID_USAGE_SENSOR_DATA_ENVIRONMENTAL_TEMPERATURE, temp_st->temperature_attr.report_id, - SENSOR_HUB_SYNC); + SENSOR_HUB_SYNC, + temp_st->temperature_attr.logical_minimum < 0); hid_sensor_power_state( &temp_st->common_attributes, false); diff --git a/drivers/rtc/rtc-hid-sensor-time.c b/drivers/rtc/rtc-hid-sensor-time.c index 2751dba850c6..3e1abb455472 100644 --- a/drivers/rtc/rtc-hid-sensor-time.c +++ b/drivers/rtc/rtc-hid-sensor-time.c @@ -213,7 +213,7 @@ static int hid_rtc_read_time(struct device *dev, struct rtc_time *tm) /* get a report with all values through requesting one value */ sensor_hub_input_attr_get_raw_value(time_state->common_attributes.hsdev, HID_USAGE_SENSOR_TIME, hid_time_addresses[0], - time_state->info[0].report_id, SENSOR_HUB_SYNC); + time_state->info[0].report_id, SENSOR_HUB_SYNC, false); /* wait for all values (event) */ ret = wait_for_completion_killable_timeout( &time_state->comp_last_time, HZ*6); diff --git a/include/linux/hid-sensor-hub.h b/include/linux/hid-sensor-hub.h index 331dc377c275..dc12f5c4b076 100644 --- a/include/linux/hid-sensor-hub.h +++ b/include/linux/hid-sensor-hub.h @@ -177,6 +177,7 @@ int sensor_hub_input_get_attribute_info(struct hid_sensor_hub_device *hsdev, * @attr_usage_id: Attribute usage id as per spec * @report_id: Report id to look for * @flag: Synchronous or asynchronous read +* @is_signed: If true then fields < 32 bits will be sign-extended * * Issues a synchronous or asynchronous read request for an input attribute. * Returns data upto 32 bits. @@ -190,7 +191,8 @@ enum sensor_hub_read_flags { int sensor_hub_input_attr_get_raw_value(struct hid_sensor_hub_device *hsdev, u32 usage_id, u32 attr_usage_id, u32 report_id, - enum sensor_hub_read_flags flag + enum sensor_hub_read_flags flag, + bool is_signed );
/**
From: Vadim Pasternak vadimp@mellanox.com
[ Upstream commit 243cfe3fb8978c7eec24511aba7dac98819ed896 ]
Fix macros for tacometer fault reading. This fix is relevant for three Mellanox systems MQMB7, MSN37, MSN34, which are about to be released to the customers. At the moment, none of them is at customers sites.
Fixes: 65afb4c8e7e4 ("hwmon: (mlxreg-fan) Add support for Mellanox FAN driver") Signed-off-by: Vadim Pasternak vadimp@mellanox.com Signed-off-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hwmon/mlxreg-fan.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/hwmon/mlxreg-fan.c b/drivers/hwmon/mlxreg-fan.c index de46577c7d5a..d8fa4bea4bc8 100644 --- a/drivers/hwmon/mlxreg-fan.c +++ b/drivers/hwmon/mlxreg-fan.c @@ -51,7 +51,7 @@ */ #define MLXREG_FAN_GET_RPM(rval, d, s) (DIV_ROUND_CLOSEST(15000000 * 100, \ ((rval) + (s)) * (d))) -#define MLXREG_FAN_GET_FAULT(val, mask) (!!((val) ^ (mask))) +#define MLXREG_FAN_GET_FAULT(val, mask) (!((val) ^ (mask))) #define MLXREG_FAN_PWM_DUTY2STATE(duty) (DIV_ROUND_CLOSEST((duty) * \ MLXREG_FAN_MAX_STATE, \ MLXREG_FAN_MAX_DUTY))
From: Roman Gushchin guroan@gmail.com
[ Upstream commit 569a933b03f3c48b392fe67c0086b3a6b9306b5a ]
Naresh reported an issue with the non-atomic memory allocation of cgroup local storage buffers:
[ 73.047526] BUG: sleeping function called from invalid context at /srv/oe/build/tmp-rpb-glibc/work-shared/intel-corei7-64/kernel-source/mm/slab.h:421 [ 73.060915] in_atomic(): 1, irqs_disabled(): 0, pid: 3157, name: test_cgroup_sto [ 73.068342] INFO: lockdep is turned off. [ 73.072293] CPU: 2 PID: 3157 Comm: test_cgroup_sto Not tainted 4.20.0-rc2-next-20181113 #1 [ 73.080548] Hardware name: Supermicro SYS-5019S-ML/X11SSH-F, BIOS 2.0b 07/27/2017 [ 73.088018] Call Trace: [ 73.090463] dump_stack+0x70/0xa5 [ 73.093783] ___might_sleep+0x152/0x240 [ 73.097619] __might_sleep+0x4a/0x80 [ 73.101191] __kmalloc_node+0x1cf/0x2f0 [ 73.105031] ? cgroup_storage_update_elem+0x46/0x90 [ 73.109909] cgroup_storage_update_elem+0x46/0x90
cgroup_storage_update_elem() (as well as other update map update callbacks) is called with disabled preemption, so GFP_ATOMIC allocation should be used: e.g. alloc_htab_elem() in hashtab.c.
Reported-by: Naresh Kamboju naresh.kamboju@linaro.org Tested-by: Naresh Kamboju naresh.kamboju@linaro.org Signed-off-by: Roman Gushchin guro@fb.com Cc: Alexei Starovoitov ast@kernel.org Cc: Daniel Borkmann daniel@iogearbox.net Signed-off-by: Alexei Starovoitov ast@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/bpf/local_storage.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/kernel/bpf/local_storage.c b/kernel/bpf/local_storage.c index 830d7f095748..fc1605aee5ea 100644 --- a/kernel/bpf/local_storage.c +++ b/kernel/bpf/local_storage.c @@ -138,7 +138,8 @@ static int cgroup_storage_update_elem(struct bpf_map *map, void *_key, return -ENOENT;
new = kmalloc_node(sizeof(struct bpf_storage_buffer) + - map->value_size, __GFP_ZERO | GFP_USER, + map->value_size, + __GFP_ZERO | GFP_ATOMIC | __GFP_NOWARN, map->numa_node); if (!new) return -ENOMEM;
On Wed, 5 Dec 2018 at 15:08, Sasha Levin sashal@kernel.org wrote:
From: Roman Gushchin guroan@gmail.com
[ Upstream commit 569a933b03f3c48b392fe67c0086b3a6b9306b5a ]
Naresh reported an issue with the non-atomic memory allocation of cgroup local storage buffers:
[ 73.047526] BUG: sleeping function called from invalid context at /srv/oe/build/tmp-rpb-glibc/work-shared/intel-corei7-64/kernel-source/mm/slab.h:421 [ 73.060915] in_atomic(): 1, irqs_disabled(): 0, pid: 3157, name: test_cgroup_sto [ 73.068342] INFO: lockdep is turned off. [ 73.072293] CPU: 2 PID: 3157 Comm: test_cgroup_sto Not tainted 4.20.0-rc2-next-20181113 #1 [ 73.080548] Hardware name: Supermicro SYS-5019S-ML/X11SSH-F, BIOS 2.0b 07/27/2017 [ 73.088018] Call Trace: [ 73.090463] dump_stack+0x70/0xa5 [ 73.093783] ___might_sleep+0x152/0x240 [ 73.097619] __might_sleep+0x4a/0x80 [ 73.101191] __kmalloc_node+0x1cf/0x2f0 [ 73.105031] ? cgroup_storage_update_elem+0x46/0x90 [ 73.109909] cgroup_storage_update_elem+0x46/0x90
cgroup_storage_update_elem() (as well as other update map update callbacks) is called with disabled preemption, so GFP_ATOMIC allocation should be used: e.g. alloc_htab_elem() in hashtab.c.
Reported-by: Naresh Kamboju naresh.kamboju@linaro.org Tested-by: Naresh Kamboju naresh.kamboju@linaro.org Signed-off-by: Roman Gushchin guro@fb.com Cc: Alexei Starovoitov ast@kernel.org Cc: Daniel Borkmann daniel@iogearbox.net Signed-off-by: Alexei Starovoitov ast@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org
I have reported above issue on 4.20.0-rc2-next-20181113. Now this BUG re-occurring on 4.19.8-rc1 on x86_64 and arm64 devices.
[ 70.288592] BUG: sleeping function called from invalid context at /srv/oe/build/tmp-rpb-glibc/work-shared/intel-corei7-64/kernel-source/mm/slab.h:421 [ 70.301992] in_atomic(): 1, irqs_disabled(): 0, pid: 3001, name: test_cgroup_sto [ 70.309424] INFO: lockdep is turned off. [ 70.313416] CPU: 0 PID: 3001 Comm: test_cgroup_sto Not tainted 4.19.8-rc1 #1 [ 70.320483] Hardware name: Supermicro SYS-5019S-ML/X11SSH-F, BIOS 2.0b 07/27/2017 [ 70.327953] Call Trace: [ 70.330402] dump_stack+0x70/0xa5 [ 70.333765] ___might_sleep+0x152/0x240 [ 70.337599] __might_sleep+0x4a/0x80 [ 70.341169] __kmalloc_node+0x1d1/0x300 [ 70.345003] ? cgroup_storage_update_elem+0x46/0x90 [ 70.349881] cgroup_storage_update_elem+0x46/0x90 [ 70.354585] map_update_elem+0x1fd/0x450 [ 70.358504] __x64_sys_bpf+0x129/0x270 [ 70.362258] do_syscall_64+0x55/0x190 [ 70.365923] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 70.370974] RIP: 0033:0x7f42e0ebb969 [ 70.374544] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d df e4 2b 00 f7 d8 64 89 01 48 [ 70.393281] RSP: 002b:00007ffde61a0a08 EFLAGS: 00000202 ORIG_RAX: 0000000000000141 [ 70.400845] RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f42e0ebb969 [ 70.407971] RDX: 0000000000000048 RSI: 00007ffde61a0a50 RDI: 0000000000000002 [ 70.415094] RBP: 00007ffde61a0a20 R08: 00007ffde61a0a50 R09: 00007ffde61a0a50 [ 70.422216] R10: 00007ffde61a0a50 R11: 0000000000000202 R12: 0000000000000005 [ 70.429342] R13: 00007ffde61a0c10 R14: 0000000000000000 R15: 0000000000000000 selftests: bpf: test_cgroup_storage
Full test log links, arm64 Juno https://lkft.validation.linaro.org/scheduler/job/537820#L2971
x86_64 Supermicro SYS-5019S-ML/X11SSH-F https://lkft.validation.linaro.org/scheduler/job/537772#L2724
Best regards Naresh Kamboju
kernel/bpf/local_storage.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/kernel/bpf/local_storage.c b/kernel/bpf/local_storage.c index 830d7f095748..fc1605aee5ea 100644 --- a/kernel/bpf/local_storage.c +++ b/kernel/bpf/local_storage.c @@ -138,7 +138,8 @@ static int cgroup_storage_update_elem(struct bpf_map *map, void *_key, return -ENOENT;
new = kmalloc_node(sizeof(struct bpf_storage_buffer) +
map->value_size, __GFP_ZERO | GFP_USER,
map->value_size,__GFP_ZERO | GFP_ATOMIC | __GFP_NOWARN, map->numa_node); if (!new) return -ENOMEM;-- 2.17.1
On Fri, 7 Dec 2018 at 12:10, Naresh Kamboju naresh.kamboju@linaro.org wrote:
On Wed, 5 Dec 2018 at 15:08, Sasha Levin sashal@kernel.org wrote:
From: Roman Gushchin guroan@gmail.com
[ Upstream commit 569a933b03f3c48b392fe67c0086b3a6b9306b5a ]
Naresh reported an issue with the non-atomic memory allocation of cgroup local storage buffers:
[ 73.047526] BUG: sleeping function called from invalid context at /srv/oe/build/tmp-rpb-glibc/work-shared/intel-corei7-64/kernel-source/mm/slab.h:421 [ 73.060915] in_atomic(): 1, irqs_disabled(): 0, pid: 3157, name: test_cgroup_sto [ 73.068342] INFO: lockdep is turned off. [ 73.072293] CPU: 2 PID: 3157 Comm: test_cgroup_sto Not tainted 4.20.0-rc2-next-20181113 #1 [ 73.080548] Hardware name: Supermicro SYS-5019S-ML/X11SSH-F, BIOS 2.0b 07/27/2017 [ 73.088018] Call Trace: [ 73.090463] dump_stack+0x70/0xa5 [ 73.093783] ___might_sleep+0x152/0x240 [ 73.097619] __might_sleep+0x4a/0x80 [ 73.101191] __kmalloc_node+0x1cf/0x2f0 [ 73.105031] ? cgroup_storage_update_elem+0x46/0x90 [ 73.109909] cgroup_storage_update_elem+0x46/0x90
cgroup_storage_update_elem() (as well as other update map update callbacks) is called with disabled preemption, so GFP_ATOMIC allocation should be used: e.g. alloc_htab_elem() in hashtab.c.
Reported-by: Naresh Kamboju naresh.kamboju@linaro.org Tested-by: Naresh Kamboju naresh.kamboju@linaro.org Signed-off-by: Roman Gushchin guro@fb.com Cc: Alexei Starovoitov ast@kernel.org Cc: Daniel Borkmann daniel@iogearbox.net Signed-off-by: Alexei Starovoitov ast@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org
I have reported above issue on 4.20.0-rc2-next-20181113. Now this BUG re-occurring on 4.19.8-rc1 on x86_64 and arm64 devices.
This BUG: was seen on 4.19.1-rc1 also on x86_64 and arm64 devices.
- Naresh
From: Jens Axboe axboe@kernel.dk
[ Upstream commit 53fffe29a9e664a999dd3787e4428da8c30533e0 ]
If the ioprio capability check fails, we return without putting the file pointer.
Fixes: d9a08a9e616b ("fs: Add aio iopriority support") Signed-off-by: Jens Axboe axboe@kernel.dk Signed-off-by: Al Viro viro@zeniv.linux.org.uk Signed-off-by: Sasha Levin sashal@kernel.org --- fs/aio.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/fs/aio.c b/fs/aio.c index b9350f3360c6..04c4d6218978 100644 --- a/fs/aio.c +++ b/fs/aio.c @@ -1436,6 +1436,7 @@ static int aio_prep_rw(struct kiocb *req, struct iocb *iocb) ret = ioprio_check_cap(iocb->aio_reqprio); if (ret) { pr_debug("aio ioprio check cap error: %d\n", ret); + fput(req->ki_filp); return ret; }
From: Taehee Yoo ap420073@gmail.com
[ Upstream commit b4e955e9f372035361fbc6f07b21fe2cc6a5be4a ]
In the htable_create(), hinfo is allocated by vmalloc() So that if error occurred, hinfo should be freed.
Fixes: 11d5f15723c9 ("netfilter: xt_hashlimit: Create revision 2 to support higher pps rates") Signed-off-by: Taehee Yoo ap420073@gmail.com Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/xt_hashlimit.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-)
diff --git a/net/netfilter/xt_hashlimit.c b/net/netfilter/xt_hashlimit.c index 3e7d259e5d8d..1ad4017f9b73 100644 --- a/net/netfilter/xt_hashlimit.c +++ b/net/netfilter/xt_hashlimit.c @@ -295,9 +295,10 @@ static int htable_create(struct net *net, struct hashlimit_cfg3 *cfg,
/* copy match config into hashtable config */ ret = cfg_copy(&hinfo->cfg, (void *)cfg, 3); - - if (ret) + if (ret) { + vfree(hinfo); return ret; + }
hinfo->cfg.size = size; if (hinfo->cfg.max == 0) @@ -814,7 +815,6 @@ hashlimit_mt_v1(const struct sk_buff *skb, struct xt_action_param *par) int ret;
ret = cfg_copy(&cfg, (void *)&info->cfg, 1); - if (ret) return ret;
@@ -830,7 +830,6 @@ hashlimit_mt_v2(const struct sk_buff *skb, struct xt_action_param *par) int ret;
ret = cfg_copy(&cfg, (void *)&info->cfg, 2); - if (ret) return ret;
@@ -921,7 +920,6 @@ static int hashlimit_mt_check_v1(const struct xt_mtchk_param *par) return ret;
ret = cfg_copy(&cfg, (void *)&info->cfg, 1); - if (ret) return ret;
@@ -940,7 +938,6 @@ static int hashlimit_mt_check_v2(const struct xt_mtchk_param *par) return ret;
ret = cfg_copy(&cfg, (void *)&info->cfg, 2); - if (ret) return ret;
From: Huacai Chen chenhc@lemote.com
[ Upstream commit 09aaf6813cfca4c18034fda7a43e68763f34abb1 ]
Both datasheet and comments of store_temp_mode() tell us that temp1~4_type is writable, so fix it.
Signed-off-by: Yao Wang wangyao@lemote.com Signed-off-by: Huacai Chen chenhc@lemote.com Fixes: 39deb6993e7c (" hwmon: (w83795) Simplify temperature sensor type handling") Signed-off-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/hwmon/w83795.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/hwmon/w83795.c b/drivers/hwmon/w83795.c index 49276bbdac3d..1bb80f992aa8 100644 --- a/drivers/hwmon/w83795.c +++ b/drivers/hwmon/w83795.c @@ -1691,7 +1691,7 @@ store_sf_setup(struct device *dev, struct device_attribute *attr, * somewhere else in the code */ #define SENSOR_ATTR_TEMP(index) { \ - SENSOR_ATTR_2(temp##index##_type, S_IRUGO | (index < 4 ? S_IWUSR : 0), \ + SENSOR_ATTR_2(temp##index##_type, S_IRUGO | (index < 5 ? S_IWUSR : 0), \ show_temp_mode, store_temp_mode, NOT_USED, index - 1), \ SENSOR_ATTR_2(temp##index##_input, S_IRUGO, show_temp, \ NULL, TEMP_READ, index - 1), \
From: Jiri Olsa jolsa@kernel.org
[ Upstream commit b01c1f69c8660eaeab7d365cd570103c5c073a02 ]
When reporting on 'record' server we try to retrieve/use the mnt namespace of the profiled tasks. We use following API with cookie to hold the return namespace, roughly:
nsinfo__mountns_enter(struct nsinfo *nsi, struct nscookie *nc) setns(newns, 0); ... new ns related open.. ... nsinfo__mountns_exit(struct nscookie *nc) setns(nc->oldns)
Once finished we setns to old namespace, which also sets the current working directory (cwd) to "/", trashing the cwd we had.
This is mostly fine, because we use absolute paths almost everywhere, but it screws up 'perf diff':
# perf diff failed to open perf.data: No such file or directory (try 'perf record' first) ...
Adding the current working directory to be part of the cookie and restoring it in the nsinfo__mountns_exit call.
Signed-off-by: Jiri Olsa jolsa@kernel.org Cc: Alexander Shishkin alexander.shishkin@linux.intel.com Cc: Krister Johansen kjlx@templeofstupid.com Cc: Namhyung Kim namhyung@kernel.org Cc: Peter Zijlstra peterz@infradead.org Fixes: 843ff37bb59e ("perf symbols: Find symbols in different mount namespace") Link: http://lkml.kernel.org/r/20181101170001.30019-1-jolsa@kernel.org [ No need to check for NULL args for free(), use zfree() for struct members ] Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- tools/perf/util/namespaces.c | 17 +++++++++++++++-- tools/perf/util/namespaces.h | 1 + 2 files changed, 16 insertions(+), 2 deletions(-)
diff --git a/tools/perf/util/namespaces.c b/tools/perf/util/namespaces.c index cf8bd123cf73..aed170bd4384 100644 --- a/tools/perf/util/namespaces.c +++ b/tools/perf/util/namespaces.c @@ -18,6 +18,7 @@ #include <stdio.h> #include <string.h> #include <unistd.h> +#include <asm/bug.h>
struct namespaces *namespaces__new(struct namespaces_event *event) { @@ -186,6 +187,7 @@ void nsinfo__mountns_enter(struct nsinfo *nsi, char curpath[PATH_MAX]; int oldns = -1; int newns = -1; + char *oldcwd = NULL;
if (nc == NULL) return; @@ -199,9 +201,13 @@ void nsinfo__mountns_enter(struct nsinfo *nsi, if (snprintf(curpath, PATH_MAX, "/proc/self/ns/mnt") >= PATH_MAX) return;
+ oldcwd = get_current_dir_name(); + if (!oldcwd) + return; + oldns = open(curpath, O_RDONLY); if (oldns < 0) - return; + goto errout;
newns = open(nsi->mntns_path, O_RDONLY); if (newns < 0) @@ -210,11 +216,13 @@ void nsinfo__mountns_enter(struct nsinfo *nsi, if (setns(newns, CLONE_NEWNS) < 0) goto errout;
+ nc->oldcwd = oldcwd; nc->oldns = oldns; nc->newns = newns; return;
errout: + free(oldcwd); if (oldns > -1) close(oldns); if (newns > -1) @@ -223,11 +231,16 @@ void nsinfo__mountns_enter(struct nsinfo *nsi,
void nsinfo__mountns_exit(struct nscookie *nc) { - if (nc == NULL || nc->oldns == -1 || nc->newns == -1) + if (nc == NULL || nc->oldns == -1 || nc->newns == -1 || !nc->oldcwd) return;
setns(nc->oldns, CLONE_NEWNS);
+ if (nc->oldcwd) { + WARN_ON_ONCE(chdir(nc->oldcwd)); + zfree(&nc->oldcwd); + } + if (nc->oldns > -1) { close(nc->oldns); nc->oldns = -1; diff --git a/tools/perf/util/namespaces.h b/tools/perf/util/namespaces.h index cae1a9a39722..d5f46c09ea31 100644 --- a/tools/perf/util/namespaces.h +++ b/tools/perf/util/namespaces.h @@ -38,6 +38,7 @@ struct nsinfo { struct nscookie { int oldns; int newns; + char *oldcwd; };
int nsinfo__init(struct nsinfo *nsi);
From: Trent Piepho tpiepho@impinj.com
[ Upstream commit 68bc10bf992180f269816ff3d22eb30383138577 ]
This bug was introduced in the interaction for two commits on either branch of the merge commit 562df5c8521e ("Merge branch 'pci/host-designware' into next").
Commit 4d107d3b5a68 ("PCI: imx6: Move link up check into imx6_pcie_wait_for_link()"), changed imx6_pcie_wait_for_link() to poll the link status register directly, checking for link up and not training, and made imx6_pcie_link_up() only check the link up bit (once, not a polling loop).
While commit 886bc5ceb5cc ("PCI: designware: Add generic dw_pcie_wait_for_link()"), replaced the loop in imx6_pcie_wait_for_link() with a call to a new dwc core function, which polled imx6_pcie_link_up(), which still checked both link up and not training in a loop.
When these two commits were merged, the version of imx6_pcie_wait_for_link() from 886bc5ceb5cc was kept, which eliminated the link training check placed there by 4d107d3b5a68. However, the version of imx6_pcie_link_up() from 4d107d3b5a68 was kept, which eliminated the link training check that had been there and was moved to imx6_pcie_wait_for_link().
The result was the link training check got lost for the imx6 driver.
Eliminate imx6_pcie_link_up() so that the default handler, dw_pcie_link_up(), is used instead. The default handler has the correct code, which checks for link up and also that it still is not training, fixing the regression.
Fixes: 562df5c8521e ("Merge branch 'pci/host-designware' into next") Signed-off-by: Trent Piepho tpiepho@impinj.com [lorenzo.pieralisi@arm.com: rewrote the commit log] Signed-off-by: Lorenzo Pieralisi lorenzo.pieralisi@arm.com Reviewed-by: Lucas Stach l.stach@pengutronix.de Cc: Bjorn Helgaas bhelgaas@google.com Cc: Joao Pinto Joao.Pinto@synopsys.com Cc: Lorenzo Pieralisi lorenzo.pieralisi@arm.com Cc: Richard Zhu hongxing.zhu@nxp.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/controller/dwc/pci-imx6.c | 10 +--------- 1 file changed, 1 insertion(+), 9 deletions(-)
diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c index 4a9a673b4777..975050a69494 100644 --- a/drivers/pci/controller/dwc/pci-imx6.c +++ b/drivers/pci/controller/dwc/pci-imx6.c @@ -80,8 +80,6 @@ struct imx6_pcie { #define PCIE_PL_PFLR_FORCE_LINK (1 << 15) #define PCIE_PHY_DEBUG_R0 (PL_OFFSET + 0x28) #define PCIE_PHY_DEBUG_R1 (PL_OFFSET + 0x2c) -#define PCIE_PHY_DEBUG_R1_XMLH_LINK_IN_TRAINING (1 << 29) -#define PCIE_PHY_DEBUG_R1_XMLH_LINK_UP (1 << 4)
#define PCIE_PHY_CTRL (PL_OFFSET + 0x114) #define PCIE_PHY_CTRL_DATA_LOC 0 @@ -641,12 +639,6 @@ static int imx6_pcie_host_init(struct pcie_port *pp) return 0; }
-static int imx6_pcie_link_up(struct dw_pcie *pci) -{ - return dw_pcie_readl_dbi(pci, PCIE_PHY_DEBUG_R1) & - PCIE_PHY_DEBUG_R1_XMLH_LINK_UP; -} - static const struct dw_pcie_host_ops imx6_pcie_host_ops = { .host_init = imx6_pcie_host_init, }; @@ -679,7 +671,7 @@ static int imx6_add_pcie_port(struct imx6_pcie *imx6_pcie, }
static const struct dw_pcie_ops dw_pcie_ops = { - .link_up = imx6_pcie_link_up, + /* No special ops needed, but pcie-designware still expects this struct */ };
static int imx6_pcie_probe(struct platform_device *pdev)
From: Keyon Jie yang.jie@linux.intel.com
[ Upstream commit a3e620f8422832afd832ad5e20aa97d0c72bada8 ]
The machine_quirk may return NULL which means the acpi entries should be skipped and search for next matched entry is needed, here add return check here and continue for NULL case.
Signed-off-by: Keyon Jie yang.jie@linux.intel.com Signed-off-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/soc-acpi.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/sound/soc/soc-acpi.c b/sound/soc/soc-acpi.c index b8e72b52db30..4fb29f0e561e 100644 --- a/sound/soc/soc-acpi.c +++ b/sound/soc/soc-acpi.c @@ -10,11 +10,17 @@ struct snd_soc_acpi_mach * snd_soc_acpi_find_machine(struct snd_soc_acpi_mach *machines) { struct snd_soc_acpi_mach *mach; + struct snd_soc_acpi_mach *mach_alt;
for (mach = machines; mach->id[0]; mach++) { if (acpi_dev_present(mach->id, NULL, -1)) { - if (mach->machine_quirk) - mach = mach->machine_quirk(mach); + if (mach->machine_quirk) { + mach_alt = mach->machine_quirk(mach); + if (!mach_alt) + continue; /* not full match, ignore */ + mach = mach_alt; + } + return mach; } }
From: Artem Savkov asavkov@redhat.com
[ Upstream commit 0b9301fb632f7111a3293a30cc5b20f1b82ed08d ]
If read_symbols() fails during second list traversal (the one dealing with ".cold" subfunctions) it frees the symbol, but never deletes it from the list/hash_table resulting in symbol being freed again in elf_close(). Fix it by just returning an error, leaving cleanup to elf_close().
Signed-off-by: Artem Savkov asavkov@redhat.com Signed-off-by: Josh Poimboeuf jpoimboe@redhat.com Cc: Linus Torvalds torvalds@linux-foundation.org Cc: Peter Zijlstra peterz@infradead.org Cc: Thomas Gleixner tglx@linutronix.de Fixes: 13810435b9a7 ("objtool: Support GCC 8's cold subfunctions") Link: http://lkml.kernel.org/r/beac5a9b7da9e8be90223459dcbe07766ae437dd.1542736240... Signed-off-by: Ingo Molnar mingo@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/objtool/elf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/tools/objtool/elf.c b/tools/objtool/elf.c index 7ec85d567598..a6f543e0b387 100644 --- a/tools/objtool/elf.c +++ b/tools/objtool/elf.c @@ -312,7 +312,7 @@ static int read_symbols(struct elf *elf) if (!pfunc) { WARN("%s(): can't find parent function", sym->name); - goto err; + return -1; }
sym->pfunc = pfunc;
From: Artem Savkov asavkov@redhat.com
[ Upstream commit 22566c1603030f0a036ad564634b064ad1a55db2 ]
Because find_symbol_by_name() traverses the same lists as read_symbols(), changing sym->name in place without copying it affects the result of find_symbol_by_name(). In the case where a ".cold" function precedes its parent in sec->symbol_list, it can result in a function being considered a parent of itself. This leads to function length being set to 0 and other consequent side-effects including a segfault in add_switch_table(). The effects of this bug are only visible when building with -ffunction-sections in KCFLAGS.
Fix by copying the search string instead of modifying it in place.
Signed-off-by: Artem Savkov asavkov@redhat.com Signed-off-by: Josh Poimboeuf jpoimboe@redhat.com Cc: Linus Torvalds torvalds@linux-foundation.org Cc: Peter Zijlstra peterz@infradead.org Cc: Thomas Gleixner tglx@linutronix.de Fixes: 13810435b9a7 ("objtool: Support GCC 8's cold subfunctions") Link: http://lkml.kernel.org/r/910abd6b5a4945130fd44f787c24e07b9e07c8da.1542736240... Signed-off-by: Ingo Molnar mingo@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/objtool/elf.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-)
diff --git a/tools/objtool/elf.c b/tools/objtool/elf.c index a6f543e0b387..b75d004f6482 100644 --- a/tools/objtool/elf.c +++ b/tools/objtool/elf.c @@ -31,6 +31,8 @@ #include "elf.h" #include "warn.h"
+#define MAX_NAME_LEN 128 + struct section *find_section_by_name(struct elf *elf, const char *name) { struct section *sec; @@ -298,6 +300,8 @@ static int read_symbols(struct elf *elf) /* Create parent/child links for any cold subfunctions */ list_for_each_entry(sec, &elf->sections, list) { list_for_each_entry(sym, &sec->symbol_list, list) { + char pname[MAX_NAME_LEN + 1]; + size_t pnamelen; if (sym->type != STT_FUNC) continue; sym->pfunc = sym->cfunc = sym; @@ -305,9 +309,16 @@ static int read_symbols(struct elf *elf) if (!coldstr) continue;
- coldstr[0] = '\0'; - pfunc = find_symbol_by_name(elf, sym->name); - coldstr[0] = '.'; + pnamelen = coldstr - sym->name; + if (pnamelen > MAX_NAME_LEN) { + WARN("%s(): parent function name exceeds maximum length of %d characters", + sym->name, MAX_NAME_LEN); + return -1; + } + + strncpy(pname, sym->name, pnamelen); + pname[pnamelen] = '\0'; + pfunc = find_symbol_by_name(elf, pname);
if (!pfunc) { WARN("%s(): can't find parent function",
From: Manu Gautam mgautam@codeaurora.org
[ Upstream commit 6e34d358b24ffc40764eb3681164c79091765429 ]
Fix HSTX_TRIM tuning logic which instead of using fused value as HSTX_TRIM, incorrectly performs bitwise OR operation with existing default value.
Fixes: ca04d9d3e1b1 ("phy: qcom-qusb2: New driver for QUSB2 PHY on Qcom chips") Signed-off-by: Manu Gautam mgautam@codeaurora.org Reviewed-by: Douglas Anderson dianders@chromium.org Reviewed-by: Stephen Boyd swboyd@chromium.org Acked-by: Vivek Gautam vivek.gautam@codeaurora.org Signed-off-by: Kishon Vijay Abraham I kishon@ti.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/phy/qualcomm/phy-qcom-qusb2.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c index e70e425f26f5..9d6c88064158 100644 --- a/drivers/phy/qualcomm/phy-qcom-qusb2.c +++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c @@ -402,10 +402,10 @@ static void qusb2_phy_set_tune2_param(struct qusb2_phy *qphy)
/* * Read efuse register having TUNE2/1 parameter's high nibble. - * If efuse register shows value as 0x0, or if we fail to find - * a valid efuse register settings, then use default value - * as 0xB for high nibble that we have already set while - * configuring phy. + * If efuse register shows value as 0x0 (indicating value is not + * fused), or if we fail to find a valid efuse register setting, + * then use default value for high nibble that we have already + * set while configuring the phy. */ val = nvmem_cell_read(qphy->cell, NULL); if (IS_ERR(val) || !val[0]) { @@ -415,12 +415,13 @@ static void qusb2_phy_set_tune2_param(struct qusb2_phy *qphy)
/* Fused TUNE1/2 value is the higher nibble only */ if (cfg->update_tune1_with_efuse) - qusb2_setbits(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE1], - val[0] << 0x4); + qusb2_write_mask(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE1], + val[0] << HSTX_TRIM_SHIFT, + HSTX_TRIM_MASK); else - qusb2_setbits(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE2], - val[0] << 0x4); - + qusb2_write_mask(qphy->base, cfg->regs[QUSB2PHY_PORT_TUNE2], + val[0] << HSTX_TRIM_SHIFT, + HSTX_TRIM_MASK); }
static int qusb2_phy_set_mode(struct phy *phy, enum phy_mode mode)
From: Manu Gautam mgautam@codeaurora.org
[ Upstream commit c88520db18ba0b9a41326c3b8680e7c09eb4c381 ]
Tune1 register on sdm845 is used to update HSTX_TRIM with fused setting. Enable same by specifying update_tune1_with_efuse flag for sdm845, otherwise driver ends up programming tune2 register.
Fixes: ef17f6e212ca ("phy: qcom-qusb2: Add QUSB2 PHYs support for sdm845") Signed-off-by: Manu Gautam mgautam@codeaurora.org Reviewed-by: Douglas Anderson dianders@chromium.org Reviewed-by: Stephen Boyd swboyd@chromium.org Acked-by: Vivek Gautam vivek.gautam@codeaurora.org Signed-off-by: Kishon Vijay Abraham I kishon@ti.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/phy/qualcomm/phy-qcom-qusb2.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c index 9d6c88064158..69c92843eb3b 100644 --- a/drivers/phy/qualcomm/phy-qcom-qusb2.c +++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c @@ -231,6 +231,7 @@ static const struct qusb2_phy_cfg sdm845_phy_cfg = { .mask_core_ready = CORE_READY_STATUS, .has_pll_override = true, .autoresume_en = BIT(0), + .update_tune1_with_efuse = true, };
static const char * const qusb2_phy_vreg_names[] = {
From: Romain Izard romain.izard.pro@gmail.com
[ Upstream commit 4ab7ca092c3c7ac8b16aa28eba723a8868f82f14 ]
The SAMA5D2 is different from SAMA5D3 and SAMA5D4, as there are two different clocks for the peripherals in the SoC. The Static Memory controller is connected to the divided master clock.
Unfortunately, the device tree does not correctly show this and uses the master clock directly. This clock is then used by the code for the NAND controller to calculate the timings for the controller, and we end up with slow NAND Flash access.
Fix the device tree, and the performance of Flash access is improved.
Signed-off-by: Romain Izard romain.izard.pro@gmail.com Signed-off-by: Alexandre Belloni alexandre.belloni@bootlin.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/sama5d2.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi index 61f68e5c48e9..b405992eb601 100644 --- a/arch/arm/boot/dts/sama5d2.dtsi +++ b/arch/arm/boot/dts/sama5d2.dtsi @@ -308,7 +308,7 @@ 0x1 0x0 0x60000000 0x10000000 0x2 0x0 0x70000000 0x10000000 0x3 0x0 0x80000000 0x10000000>; - clocks = <&mck>; + clocks = <&h32ck>; status = "disabled";
nand_controller: nand-controller {
From: Robbie Ko robbieko@synology.com
[ Upstream commit a4390aee72713d9e73f1132bcdeb17d72fbbf974 ]
When doing an incremental send, due to the need of delaying directory move (rename) operations we can end up in infinite loop at apply_children_dir_moves().
An example scenario that triggers this problem is described below, where directory names correspond to the numbers of their respective inodes.
Parent snapshot:
. |--- 261/ |--- 271/ |--- 266/ |--- 259/ |--- 260/ | |--- 267 | |--- 264/ | |--- 258/ | |--- 257/ | |--- 265/ |--- 268/ |--- 269/ | |--- 262/ | |--- 270/ |--- 272/ | |--- 263/ | |--- 275/ | |--- 274/ |--- 273/
Send snapshot:
. |-- 275/ |-- 274/ |-- 273/ |-- 262/ |-- 269/ |-- 258/ |-- 271/ |-- 268/ |-- 267/ |-- 270/ |-- 259/ | |-- 265/ | |-- 272/ |-- 257/ |-- 260/ |-- 264/ |-- 263/ |-- 261/ |-- 266/
When processing inode 257 we delay its move (rename) operation because its new parent in the send snapshot, inode 272, was not yet processed. Then when processing inode 272, we delay the move operation for that inode because inode 274 is its ancestor in the send snapshot. Finally we delay the move operation for inode 274 when processing it because inode 275 is its new parent in the send snapshot and was not yet moved.
When finishing processing inode 275, we start to do the move operations that were previously delayed (at apply_children_dir_moves()), resulting in the following iterations:
1) We issue the move operation for inode 274;
2) Because inode 262 depended on the move operation of inode 274 (it was delayed because 274 is its ancestor in the send snapshot), we issue the move operation for inode 262;
3) We issue the move operation for inode 272, because it was delayed by inode 274 too (ancestor of 272 in the send snapshot);
4) We issue the move operation for inode 269 (it was delayed by 262);
5) We issue the move operation for inode 257 (it was delayed by 272);
6) We issue the move operation for inode 260 (it was delayed by 272);
7) We issue the move operation for inode 258 (it was delayed by 269);
8) We issue the move operation for inode 264 (it was delayed by 257);
9) We issue the move operation for inode 271 (it was delayed by 258);
10) We issue the move operation for inode 263 (it was delayed by 264);
11) We issue the move operation for inode 268 (it was delayed by 271);
12) We verify if we can issue the move operation for inode 270 (it was delayed by 271). We detect a path loop in the current state, because inode 267 needs to be moved first before we can issue the move operation for inode 270. So we delay again the move operation for inode 270, this time we will attempt to do it after inode 267 is moved;
13) We issue the move operation for inode 261 (it was delayed by 263);
14) We verify if we can issue the move operation for inode 266 (it was delayed by 263). We detect a path loop in the current state, because inode 270 needs to be moved first before we can issue the move operation for inode 266. So we delay again the move operation for inode 266, this time we will attempt to do it after inode 270 is moved (its move operation was delayed in step 12);
15) We issue the move operation for inode 267 (it was delayed by 268);
16) We verify if we can issue the move operation for inode 266 (it was delayed by 270). We detect a path loop in the current state, because inode 270 needs to be moved first before we can issue the move operation for inode 266. So we delay again the move operation for inode 266, this time we will attempt to do it after inode 270 is moved (its move operation was delayed in step 12). So here we added again the same delayed move operation that we added in step 14;
17) We attempt again to see if we can issue the move operation for inode 266, and as in step 16, we realize we can not due to a path loop in the current state due to a dependency on inode 270. Again we delay inode's 266 rename to happen after inode's 270 move operation, adding the same dependency to the empty stack that we did in steps 14 and 16. The next iteration will pick the same move dependency on the stack (the only entry) and realize again there is still a path loop and then again the same dependency to the stack, over and over, resulting in an infinite loop.
So fix this by preventing adding the same move dependency entries to the stack by removing each pending move record from the red black tree of pending moves. This way the next call to get_pending_dir_moves() will not return anything for the current parent inode.
A test case for fstests, with this reproducer, follows soon.
Signed-off-by: Robbie Ko robbieko@synology.com Reviewed-by: Filipe Manana fdmanana@suse.com [Wrote changelog with example and more clear explanation] Signed-off-by: Filipe Manana fdmanana@suse.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/btrfs/send.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-)
diff --git a/fs/btrfs/send.c b/fs/btrfs/send.c index ba8950bfd9c7..84cb6e5ef36c 100644 --- a/fs/btrfs/send.c +++ b/fs/btrfs/send.c @@ -3344,7 +3344,8 @@ static void free_pending_move(struct send_ctx *sctx, struct pending_dir_move *m) kfree(m); }
-static void tail_append_pending_moves(struct pending_dir_move *moves, +static void tail_append_pending_moves(struct send_ctx *sctx, + struct pending_dir_move *moves, struct list_head *stack) { if (list_empty(&moves->list)) { @@ -3355,6 +3356,10 @@ static void tail_append_pending_moves(struct pending_dir_move *moves, list_add_tail(&moves->list, stack); list_splice_tail(&list, stack); } + if (!RB_EMPTY_NODE(&moves->node)) { + rb_erase(&moves->node, &sctx->pending_dir_moves); + RB_CLEAR_NODE(&moves->node); + } }
static int apply_children_dir_moves(struct send_ctx *sctx) @@ -3369,7 +3374,7 @@ static int apply_children_dir_moves(struct send_ctx *sctx) return 0;
INIT_LIST_HEAD(&stack); - tail_append_pending_moves(pm, &stack); + tail_append_pending_moves(sctx, pm, &stack);
while (!list_empty(&stack)) { pm = list_first_entry(&stack, struct pending_dir_move, list); @@ -3380,7 +3385,7 @@ static int apply_children_dir_moves(struct send_ctx *sctx) goto out; pm = get_pending_dir_moves(sctx, parent_ino); if (pm) - tail_append_pending_moves(pm, &stack); + tail_append_pending_moves(sctx, pm, &stack); } return 0;
On Wed, Dec 05, 2018 at 04:34:44AM -0500, Sasha Levin wrote:
From: Robbie Ko robbieko@synology.com
[ Upstream commit a4390aee72713d9e73f1132bcdeb17d72fbbf974 ]
...
Signed-off-by: Robbie Ko robbieko@synology.com Reviewed-by: Filipe Manana fdmanana@suse.com [Wrote changelog with example and more clear explanation] Signed-off-by: Filipe Manana fdmanana@suse.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Sasha Levin sashal@kernel.org
Ack for taking this patch to the stable trees. Thanks.
On Thu, Dec 06, 2018 at 06:55:19PM +0100, David Sterba wrote:
On Wed, Dec 05, 2018 at 04:34:44AM -0500, Sasha Levin wrote:
From: Robbie Ko robbieko@synology.com
[ Upstream commit a4390aee72713d9e73f1132bcdeb17d72fbbf974 ]
...
Signed-off-by: Robbie Ko robbieko@synology.com Reviewed-by: Filipe Manana fdmanana@suse.com [Wrote changelog with example and more clear explanation] Signed-off-by: Filipe Manana fdmanana@suse.com Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Sasha Levin sashal@kernel.org
Ack for taking this patch to the stable trees. Thanks.
Thanks David.
-- Thanks, Sasha
From: Majd Dibbiny majd@mellanox.com
[ Upstream commit 074fca3a18e7e1e0d4d7dcc9d7badc43b90232f4 ]
Currently, for IB_WR_LOCAL_INV WR, when the next fence is None, the current fence will be SMALL instead of Normal Fence.
Without this patch krping doesn't work on CX-5 devices and throws following error:
The error messages are from CX5 driver are: (from server side) [ 710.434014] mlx5_0:dump_cqe:278:(pid 2712): dump error cqe [ 710.434016] 00000000 00000000 00000000 00000000 [ 710.434016] 00000000 00000000 00000000 00000000 [ 710.434017] 00000000 00000000 00000000 00000000 [ 710.434018] 00000000 93003204 100000b8 000524d2 [ 710.434019] krping: cq completion failed with wr_id 0 status 4 opcode 128 vender_err 32
Fixed the logic to set the correct fence type.
Fixes: 6e8484c5cf07 ("RDMA/mlx5: set UMR wqe fence according to HCA cap") Signed-off-by: Majd Dibbiny majd@mellanox.com Signed-off-by: Leon Romanovsky leonro@mellanox.com Signed-off-by: Jason Gunthorpe jgg@mellanox.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/infiniband/hw/mlx5/qp.c | 19 ++++++++++--------- 1 file changed, 10 insertions(+), 9 deletions(-)
diff --git a/drivers/infiniband/hw/mlx5/qp.c b/drivers/infiniband/hw/mlx5/qp.c index d53d954ac8af..183fe5c8ceb7 100644 --- a/drivers/infiniband/hw/mlx5/qp.c +++ b/drivers/infiniband/hw/mlx5/qp.c @@ -4413,17 +4413,18 @@ static int _mlx5_ib_post_send(struct ib_qp *ibqp, const struct ib_send_wr *wr, goto out; }
- if (wr->opcode == IB_WR_LOCAL_INV || - wr->opcode == IB_WR_REG_MR) { + if (wr->opcode == IB_WR_REG_MR) { fence = dev->umr_fence; next_fence = MLX5_FENCE_MODE_INITIATOR_SMALL; - } else if (wr->send_flags & IB_SEND_FENCE) { - if (qp->next_fence) - fence = MLX5_FENCE_MODE_SMALL_AND_FENCE; - else - fence = MLX5_FENCE_MODE_FENCE; - } else { - fence = qp->next_fence; + } else { + if (wr->send_flags & IB_SEND_FENCE) { + if (qp->next_fence) + fence = MLX5_FENCE_MODE_SMALL_AND_FENCE; + else + fence = MLX5_FENCE_MODE_FENCE; + } else { + fence = qp->next_fence; + } }
switch (ibqp->qp_type) {
From: Parav Pandit parav@mellanox.com
[ Upstream commit d52ef88a9f4be523425730da3239cf87bee936da ]
Currently when MAC address is changed, regardless of the netdev reg_state, GID entries are removed and added to reflect the new MAC address and new default GID entries.
When a bonding device is used and the underlying PCI device is removed several netdevice events are generated. Two events of the interest are CHANGEADDR and UNREGISTER event on lower(slave) netdevice of the bond netdevice.
Sometimes CHANGEADDR event is generated when netdev state is UNREGISTERING (after UNREGISTER event is generated). In this scenario, GID entries for default GIDs are added and never deleted because GID entries are deleted only when netdev state is < UNREGISTERED.
This leads to non zero reference count on the netdevice. Due to this, PCI device unbind operation is getting stuck.
To avoid it, when changing mac address, add GID entries only if netdev is in REGISTERED state.
Fixes: 03db3a2d81e6 ("IB/core: Add RoCE GID table management") Signed-off-by: Parav Pandit parav@mellanox.com Reviewed-by: Mark Bloch markb@mellanox.com Signed-off-by: Leon Romanovsky leonro@mellanox.com Signed-off-by: Jason Gunthorpe jgg@mellanox.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/infiniband/core/roce_gid_mgmt.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/infiniband/core/roce_gid_mgmt.c b/drivers/infiniband/core/roce_gid_mgmt.c index ee366199b169..25d43c8f1c2a 100644 --- a/drivers/infiniband/core/roce_gid_mgmt.c +++ b/drivers/infiniband/core/roce_gid_mgmt.c @@ -767,8 +767,10 @@ static int netdevice_event(struct notifier_block *this, unsigned long event,
case NETDEV_CHANGEADDR: cmds[0] = netdev_del_cmd; - cmds[1] = add_default_gid_cmd; - cmds[2] = add_cmd; + if (ndev->reg_state == NETREG_REGISTERED) { + cmds[1] = add_default_gid_cmd; + cmds[2] = add_cmd; + } break;
case NETDEV_CHANGEUPPER:
From: Selvin Xavier selvin.xavier@broadcom.com
[ Upstream commit 3c4b1419c33c2417836a63f8126834ee36968321 ]
Driver doesn't release rtnl lock if registration with L2 driver (bnxt_re_register_netdev) fais and this causes hang while requesting for the next lock.
[ 371.635416] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 371.635417] kworker/u48:1 D 0 634 2 0x80000000 [ 371.635423] Workqueue: bnxt_re bnxt_re_task [bnxt_re] [ 371.635424] Call Trace: [ 371.635426] ? __schedule+0x36b/0xbd0 [ 371.635429] schedule+0x39/0x90 [ 371.635430] schedule_preempt_disabled+0x11/0x20 [ 371.635431] __mutex_lock+0x45b/0x9c0 [ 371.635433] ? __mutex_lock+0x16d/0x9c0 [ 371.635435] ? bnxt_re_ib_reg+0x2b/0xb30 [bnxt_re] [ 371.635438] ? wake_up_klogd+0x37/0x40 [ 371.635442] bnxt_re_ib_reg+0x2b/0xb30 [bnxt_re] [ 371.635447] bnxt_re_task+0xfd/0x180 [bnxt_re] [ 371.635449] process_one_work+0x216/0x5b0 [ 371.635450] ? process_one_work+0x189/0x5b0 [ 371.635453] worker_thread+0x4e/0x3d0 [ 371.635455] kthread+0x10e/0x140 [ 371.635456] ? process_one_work+0x5b0/0x5b0 [ 371.635458] ? kthread_stop+0x220/0x220 [ 371.635460] ret_from_fork+0x3a/0x50 [ 371.635477] INFO: task NetworkManager:1228 blocked for more than 120 seconds. [ 371.635478] Tainted: G B OE 4.20.0-rc1+ #42 [ 371.635479] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
Release the rtnl_lock correctly in the failure path.
Fixes: de5c95d0f518 ("RDMA/bnxt_re: Fix system crash during RDMA resource initialization") Signed-off-by: Selvin Xavier selvin.xavier@broadcom.com Signed-off-by: Jason Gunthorpe jgg@mellanox.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/infiniband/hw/bnxt_re/main.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/infiniband/hw/bnxt_re/main.c b/drivers/infiniband/hw/bnxt_re/main.c index 85cd1a3593d6..bb3f16273938 100644 --- a/drivers/infiniband/hw/bnxt_re/main.c +++ b/drivers/infiniband/hw/bnxt_re/main.c @@ -1252,6 +1252,7 @@ static int bnxt_re_ib_reg(struct bnxt_re_dev *rdev) /* Registered a new RoCE device instance to netdev */ rc = bnxt_re_register_netdev(rdev); if (rc) { + rtnl_unlock(); pr_err("Failed to register with netedev: %#x\n", rc); return -EINVAL; }
From: Selvin Xavier selvin.xavier@broadcom.com
[ Upstream commit a6c66d6a08b88cc10aca9d3f65cfae31e7652a99 ]
When bnxt_re_ib_reg returns failure, the device structure gets freed. Driver tries to access the device pointer after it is freed.
[ 4871.034744] Failed to register with netedev: 0xffffffa1 [ 4871.034765] infiniband (null): Failed to register with IB: 0xffffffea [ 4871.046430] ================================================================== [ 4871.046437] BUG: KASAN: use-after-free in bnxt_re_task+0x63/0x180 [bnxt_re] [ 4871.046439] Write of size 4 at addr ffff880fa8406f48 by task kworker/u48:2/17813
[ 4871.046443] CPU: 20 PID: 17813 Comm: kworker/u48:2 Kdump: loaded Tainted: G B OE 4.20.0-rc1+ #42 [ 4871.046444] Hardware name: Dell Inc. PowerEdge R730/0599V5, BIOS 1.0.4 08/28/2014 [ 4871.046447] Workqueue: bnxt_re bnxt_re_task [bnxt_re] [ 4871.046449] Call Trace: [ 4871.046454] dump_stack+0x91/0xeb [ 4871.046458] print_address_description+0x6a/0x2a0 [ 4871.046461] kasan_report+0x176/0x2d0 [ 4871.046463] ? bnxt_re_task+0x63/0x180 [bnxt_re] [ 4871.046466] bnxt_re_task+0x63/0x180 [bnxt_re] [ 4871.046470] process_one_work+0x216/0x5b0 [ 4871.046471] ? process_one_work+0x189/0x5b0 [ 4871.046475] worker_thread+0x4e/0x3d0 [ 4871.046479] kthread+0x10e/0x140 [ 4871.046480] ? process_one_work+0x5b0/0x5b0 [ 4871.046482] ? kthread_stop+0x220/0x220 [ 4871.046486] ret_from_fork+0x3a/0x50
[ 4871.046492] The buggy address belongs to the page: [ 4871.046494] page:ffffea003ea10180 count:0 mapcount:0 mapping:0000000000000000 index:0x0 [ 4871.046495] flags: 0x57ffffc0000000() [ 4871.046498] raw: 0057ffffc0000000 0000000000000000 ffffea003ea10188 0000000000000000 [ 4871.046500] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 4871.046501] page dumped because: kasan: bad access detected
Avoid accessing the device structure once it is freed.
Fixes: 497158aa5f52 ("RDMA/bnxt_re: Fix the ib_reg failure cleanup") Signed-off-by: Selvin Xavier selvin.xavier@broadcom.com Signed-off-by: Jason Gunthorpe jgg@mellanox.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/infiniband/hw/bnxt_re/main.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/infiniband/hw/bnxt_re/main.c b/drivers/infiniband/hw/bnxt_re/main.c index bb3f16273938..22bd9784fa2e 100644 --- a/drivers/infiniband/hw/bnxt_re/main.c +++ b/drivers/infiniband/hw/bnxt_re/main.c @@ -1462,6 +1462,7 @@ static void bnxt_re_task(struct work_struct *work) "Failed to register with IB: %#x", rc); bnxt_re_remove_one(rdev); bnxt_re_dev_unreg(rdev); + goto exit; } break; case NETDEV_UP: @@ -1485,6 +1486,7 @@ static void bnxt_re_task(struct work_struct *work) } smp_mb__before_atomic(); atomic_dec(&rdev->sched_count); +exit: kfree(re_work); }
From: Kamal Heib kamalheib1@gmail.com
[ Upstream commit 4f32fb921b153ae9ea280e02a3e91509fffc03d3 ]
rdmavt uses a crazy system that looses the type checking when assinging functions to struct ib_device function pointers. Because of this the signature to this function was not changed when the below commit revised things.
Fix the signature so we are not calling a function pointer with a mismatched signature.
Fixes: 477864c8fcd9 ("IB/core: Let create_ah return extended response to user") Signed-off-by: Kamal Heib kamalheib1@gmail.com Reviewed-by: Dennis Dalessandro dennis.dalessandro@intel.com Signed-off-by: Jason Gunthorpe jgg@mellanox.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/infiniband/sw/rdmavt/ah.c | 4 +++- drivers/infiniband/sw/rdmavt/ah.h | 3 ++- 2 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/infiniband/sw/rdmavt/ah.c b/drivers/infiniband/sw/rdmavt/ah.c index 89ec0f64abfc..084bb4baebb5 100644 --- a/drivers/infiniband/sw/rdmavt/ah.c +++ b/drivers/infiniband/sw/rdmavt/ah.c @@ -91,13 +91,15 @@ EXPORT_SYMBOL(rvt_check_ah); * rvt_create_ah - create an address handle * @pd: the protection domain * @ah_attr: the attributes of the AH + * @udata: pointer to user's input output buffer information. * * This may be called from interrupt context. * * Return: newly allocated ah */ struct ib_ah *rvt_create_ah(struct ib_pd *pd, - struct rdma_ah_attr *ah_attr) + struct rdma_ah_attr *ah_attr, + struct ib_udata *udata) { struct rvt_ah *ah; struct rvt_dev_info *dev = ib_to_rvt(pd->device); diff --git a/drivers/infiniband/sw/rdmavt/ah.h b/drivers/infiniband/sw/rdmavt/ah.h index 16105af99189..25271b48a683 100644 --- a/drivers/infiniband/sw/rdmavt/ah.h +++ b/drivers/infiniband/sw/rdmavt/ah.h @@ -51,7 +51,8 @@ #include <rdma/rdma_vt.h>
struct ib_ah *rvt_create_ah(struct ib_pd *pd, - struct rdma_ah_attr *ah_attr); + struct rdma_ah_attr *ah_attr, + struct ib_udata *udata); int rvt_destroy_ah(struct ib_ah *ibah); int rvt_modify_ah(struct ib_ah *ibah, struct rdma_ah_attr *ah_attr); int rvt_query_ah(struct ib_ah *ibah, struct rdma_ah_attr *ah_attr);
From: Jakub Kicinski jakub.kicinski@netronome.com
[ Upstream commit dde7011a824cfa815b03f853ec985ff46b740939 ]
This patch fixes a possible null pointer dereference in do_load, detected by the semantic patch deref_null.cocci, with the following warning:
./tools/bpf/bpftool/prog.c:1021:23-25: ERROR: map_replace is NULL but dereferenced.
The following code has potential null pointer references: 881 map_replace = reallocarray(map_replace, old_map_fds + 1, 882 sizeof(*map_replace)); 883 if (!map_replace) { 884 p_err("mem alloc failed"); 885 goto err_free_reuse_maps; 886 }
... 1019 err_free_reuse_maps: 1020 for (i = 0; i < old_map_fds; i++) 1021 close(map_replace[i].fd); 1022 free(map_replace);
Fixes: 3ff5a4dc5d89 ("tools: bpftool: allow reuse of maps with bpftool prog load") Co-developed-by: Wen Yang wen.yang99@zte.com.cn Signed-off-by: Wen Yang wen.yang99@zte.com.cn Signed-off-by: Jakub Kicinski jakub.kicinski@netronome.com Signed-off-by: Daniel Borkmann daniel@iogearbox.net Signed-off-by: Sasha Levin sashal@kernel.org --- tools/bpf/bpftool/prog.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/tools/bpf/bpftool/prog.c b/tools/bpf/bpftool/prog.c index dce960d22106..0de024a6cc2b 100644 --- a/tools/bpf/bpftool/prog.c +++ b/tools/bpf/bpftool/prog.c @@ -749,6 +749,7 @@ static int do_load(int argc, char **argv) } NEXT_ARG(); } else if (is_prefix(*argv, "map")) { + void *new_map_replace; char *endptr, *name; int fd;
@@ -782,12 +783,15 @@ static int do_load(int argc, char **argv) if (fd < 0) goto err_free_reuse_maps;
- map_replace = reallocarray(map_replace, old_map_fds + 1, - sizeof(*map_replace)); - if (!map_replace) { + new_map_replace = reallocarray(map_replace, + old_map_fds + 1, + sizeof(*map_replace)); + if (!new_map_replace) { p_err("mem alloc failed"); goto err_free_reuse_maps; } + map_replace = new_map_replace; + map_replace[old_map_fds].idx = idx; map_replace[old_map_fds].name = name; map_replace[old_map_fds].fd = fd;
From: Andrea Parri andrea.parri@amarulasolutions.com
[ Upstream commit 09d3f015d1e1b4fee7e9bbdcf54201d239393391 ]
Commit:
142b18ddc8143 ("uprobes: Fix handle_swbp() vs unregister() + register() race")
added the UPROBE_COPY_INSN flag, and corresponding smp_wmb() and smp_rmb() memory barriers, to ensure that handle_swbp() uses fully-initialized uprobes only.
However, the smp_rmb() is mis-placed: this barrier should be placed after handle_swbp() has tested for the flag, thus guaranteeing that (program-order) subsequent loads from the uprobe can see the initial stores performed by prepare_uprobe().
Move the smp_rmb() accordingly. Also amend the comments associated to the two memory barriers to indicate their actual locations.
Signed-off-by: Andrea Parri andrea.parri@amarulasolutions.com Acked-by: Oleg Nesterov oleg@redhat.com Cc: Alexander Shishkin alexander.shishkin@linux.intel.com Cc: Andrew Morton akpm@linux-foundation.org Cc: Arnaldo Carvalho de Melo acme@redhat.com Cc: Jiri Olsa jolsa@redhat.com Cc: Linus Torvalds torvalds@linux-foundation.org Cc: Namhyung Kim namhyung@kernel.org Cc: Paul E. McKenney paulmck@linux.vnet.ibm.com Cc: Peter Zijlstra peterz@infradead.org Cc: Stephane Eranian eranian@google.com Cc: Thomas Gleixner tglx@linutronix.de Cc: Vince Weaver vincent.weaver@maine.edu Cc: stable@kernel.org Fixes: 142b18ddc8143 ("uprobes: Fix handle_swbp() vs unregister() + register() race") Link: http://lkml.kernel.org/r/20181122161031.15179-1-andrea.parri@amarulasolution... Signed-off-by: Ingo Molnar mingo@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/events/uprobes.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-)
diff --git a/kernel/events/uprobes.c b/kernel/events/uprobes.c index 3207a4d26849..578d4ac54484 100644 --- a/kernel/events/uprobes.c +++ b/kernel/events/uprobes.c @@ -616,7 +616,7 @@ static int prepare_uprobe(struct uprobe *uprobe, struct file *file, BUG_ON((uprobe->offset & ~PAGE_MASK) + UPROBE_SWBP_INSN_SIZE > PAGE_SIZE);
- smp_wmb(); /* pairs with rmb() in find_active_uprobe() */ + smp_wmb(); /* pairs with the smp_rmb() in handle_swbp() */ set_bit(UPROBE_COPY_INSN, &uprobe->flags);
out: @@ -1914,10 +1914,18 @@ static void handle_swbp(struct pt_regs *regs) * After we hit the bp, _unregister + _register can install the * new and not-yet-analyzed uprobe at the same address, restart. */ - smp_rmb(); /* pairs with wmb() in install_breakpoint() */ if (unlikely(!test_bit(UPROBE_COPY_INSN, &uprobe->flags))) goto out;
+ /* + * Pairs with the smp_wmb() in prepare_uprobe(). + * + * Guarantees that if we see the UPROBE_COPY_INSN bit set, then + * we must also see the stores to &uprobe->arch performed by the + * prepare_uprobe() call. + */ + smp_rmb(); + /* Tracing handlers use ->utask to communicate with fetch methods */ if (!get_utask()) goto out;
From: Peter Ujfalusi peter.ujfalusi@ti.com
[ Upstream commit dd2f52d8991af9fe0928d59ec502ba52be7bc38d ]
The latency number is in usec for the pm_qos. Correct the calculation to give us the time in usec
Signed-off-by: Peter Ujfalusi peter.ujfalusi@ti.com Acked-by: Jarkko Nikula jarkko.nikula@bitmer.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/omap/omap-mcbsp.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c index d0ebb6b9bfac..2d6decbfc99e 100644 --- a/sound/soc/omap/omap-mcbsp.c +++ b/sound/soc/omap/omap-mcbsp.c @@ -308,9 +308,9 @@ static int omap_mcbsp_dai_hw_params(struct snd_pcm_substream *substream, pkt_size = channels; }
- latency = ((((buffer_size - pkt_size) / channels) * 1000) - / (params->rate_num / params->rate_den)); - + latency = (buffer_size - pkt_size) / channels; + latency = latency * USEC_PER_SEC / + (params->rate_num / params->rate_den); mcbsp->latency[substream->stream] = latency;
omap_mcbsp_set_threshold(substream, pkt_size);
From: Peter Ujfalusi peter.ujfalusi@ti.com
[ Upstream commit 373a500e34aea97971c9d71e45edad458d3da98f ]
We need to block sleep states which would require longer time to leave than the time the DMA must react to the DMA request in order to keep the FIFO serviced without under of overrun.
Signed-off-by: Peter Ujfalusi peter.ujfalusi@ti.com Acked-by: Jarkko Nikula jarkko.nikula@bitmer.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/omap/omap-mcpdm.c | 43 ++++++++++++++++++++++++++++++++++++- 1 file changed, 42 insertions(+), 1 deletion(-)
diff --git a/sound/soc/omap/omap-mcpdm.c b/sound/soc/omap/omap-mcpdm.c index 4c1be36c2207..7d5bdc5a2890 100644 --- a/sound/soc/omap/omap-mcpdm.c +++ b/sound/soc/omap/omap-mcpdm.c @@ -54,6 +54,8 @@ struct omap_mcpdm { unsigned long phys_base; void __iomem *io_base; int irq; + struct pm_qos_request pm_qos_req; + int latency[2];
struct mutex mutex;
@@ -277,6 +279,9 @@ static void omap_mcpdm_dai_shutdown(struct snd_pcm_substream *substream, struct snd_soc_dai *dai) { struct omap_mcpdm *mcpdm = snd_soc_dai_get_drvdata(dai); + int tx = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK); + int stream1 = tx ? SNDRV_PCM_STREAM_PLAYBACK : SNDRV_PCM_STREAM_CAPTURE; + int stream2 = tx ? SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK;
mutex_lock(&mcpdm->mutex);
@@ -289,6 +294,14 @@ static void omap_mcpdm_dai_shutdown(struct snd_pcm_substream *substream, } }
+ if (mcpdm->latency[stream2]) + pm_qos_update_request(&mcpdm->pm_qos_req, + mcpdm->latency[stream2]); + else if (mcpdm->latency[stream1]) + pm_qos_remove_request(&mcpdm->pm_qos_req); + + mcpdm->latency[stream1] = 0; + mutex_unlock(&mcpdm->mutex); }
@@ -300,7 +313,7 @@ static int omap_mcpdm_dai_hw_params(struct snd_pcm_substream *substream, int stream = substream->stream; struct snd_dmaengine_dai_dma_data *dma_data; u32 threshold; - int channels; + int channels, latency; int link_mask = 0;
channels = params_channels(params); @@ -344,14 +357,25 @@ static int omap_mcpdm_dai_hw_params(struct snd_pcm_substream *substream,
dma_data->maxburst = (MCPDM_DN_THRES_MAX - threshold) * channels; + latency = threshold; } else { /* If playback is not running assume a stereo stream to come */ if (!mcpdm->config[!stream].link_mask) mcpdm->config[!stream].link_mask = (0x3 << 3);
dma_data->maxburst = threshold * channels; + latency = (MCPDM_DN_THRES_MAX - threshold); }
+ /* + * The DMA must act to a DMA request within latency time (usec) to avoid + * under/overflow + */ + mcpdm->latency[stream] = latency * USEC_PER_SEC / params_rate(params); + + if (!mcpdm->latency[stream]) + mcpdm->latency[stream] = 10; + /* Check if we need to restart McPDM with this stream */ if (mcpdm->config[stream].link_mask && mcpdm->config[stream].link_mask != link_mask) @@ -366,6 +390,20 @@ static int omap_mcpdm_prepare(struct snd_pcm_substream *substream, struct snd_soc_dai *dai) { struct omap_mcpdm *mcpdm = snd_soc_dai_get_drvdata(dai); + struct pm_qos_request *pm_qos_req = &mcpdm->pm_qos_req; + int tx = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK); + int stream1 = tx ? SNDRV_PCM_STREAM_PLAYBACK : SNDRV_PCM_STREAM_CAPTURE; + int stream2 = tx ? SNDRV_PCM_STREAM_CAPTURE : SNDRV_PCM_STREAM_PLAYBACK; + int latency = mcpdm->latency[stream2]; + + /* Prevent omap hardware from hitting off between FIFO fills */ + if (!latency || mcpdm->latency[stream1] < latency) + latency = mcpdm->latency[stream1]; + + if (pm_qos_request_active(pm_qos_req)) + pm_qos_update_request(pm_qos_req, latency); + else if (latency) + pm_qos_add_request(pm_qos_req, PM_QOS_CPU_DMA_LATENCY, latency);
if (!omap_mcpdm_active(mcpdm)) { omap_mcpdm_start(mcpdm); @@ -427,6 +465,9 @@ static int omap_mcpdm_remove(struct snd_soc_dai *dai) free_irq(mcpdm->irq, (void *)mcpdm); pm_runtime_disable(mcpdm->dev);
+ if (pm_qos_request_active(&mcpdm->pm_qos_req)) + pm_qos_remove_request(&mcpdm->pm_qos_req); + return 0; }
From: Peter Ujfalusi peter.ujfalusi@ti.com
[ Upstream commit ffdcc3638c58d55a6fa68b6e5dfd4fb4109652eb ]
We need to block sleep states which would require longer time to leave than the time the DMA must react to the DMA request in order to keep the FIFO serviced without overrun.
Signed-off-by: Peter Ujfalusi peter.ujfalusi@ti.com Acked-by: Jarkko Nikula jarkko.nikula@bitmer.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- sound/soc/omap/omap-dmic.c | 9 +++++++++ 1 file changed, 9 insertions(+)
diff --git a/sound/soc/omap/omap-dmic.c b/sound/soc/omap/omap-dmic.c index fe966272bd0c..cba9645b6487 100644 --- a/sound/soc/omap/omap-dmic.c +++ b/sound/soc/omap/omap-dmic.c @@ -48,6 +48,8 @@ struct omap_dmic { struct device *dev; void __iomem *io_base; struct clk *fclk; + struct pm_qos_request pm_qos_req; + int latency; int fclk_freq; int out_freq; int clk_div; @@ -124,6 +126,8 @@ static void omap_dmic_dai_shutdown(struct snd_pcm_substream *substream,
mutex_lock(&dmic->mutex);
+ pm_qos_remove_request(&dmic->pm_qos_req); + if (!dai->active) dmic->active = 0;
@@ -228,6 +232,8 @@ static int omap_dmic_dai_hw_params(struct snd_pcm_substream *substream, /* packet size is threshold * channels */ dma_data = snd_soc_dai_get_dma_data(dai, substream); dma_data->maxburst = dmic->threshold * channels; + dmic->latency = (OMAP_DMIC_THRES_MAX - dmic->threshold) * USEC_PER_SEC / + params_rate(params);
return 0; } @@ -238,6 +244,9 @@ static int omap_dmic_dai_prepare(struct snd_pcm_substream *substream, struct omap_dmic *dmic = snd_soc_dai_get_drvdata(dai); u32 ctrl;
+ if (pm_qos_request_active(&dmic->pm_qos_req)) + pm_qos_update_request(&dmic->pm_qos_req, dmic->latency); + /* Configure uplink threshold */ omap_dmic_write(dmic, OMAP_DMIC_FIFO_CTRL_REG, dmic->threshold);
From: Pan Bian bianpan2016@163.com
[ Upstream commit 2084ac6c505a58f7efdec13eba633c6aaa085ca5 ]
The function dentry_connected calls dput(dentry) to drop the previously acquired reference to dentry. In this case, dentry can be released. After that, IS_ROOT(dentry) checks the condition (dentry == dentry->d_parent), which may result in a use-after-free bug. This patch directly compares dentry with its parent obtained before dropping the reference.
Fixes: a056cc8934c("exportfs: stop retrying once we race with rename/remove")
Signed-off-by: Pan Bian bianpan2016@163.com Signed-off-by: Al Viro viro@zeniv.linux.org.uk Signed-off-by: Sasha Levin sashal@kernel.org --- fs/exportfs/expfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/exportfs/expfs.c b/fs/exportfs/expfs.c index 645158dc33f1..63707abcbeb3 100644 --- a/fs/exportfs/expfs.c +++ b/fs/exportfs/expfs.c @@ -77,7 +77,7 @@ static bool dentry_connected(struct dentry *dentry) struct dentry *parent = dget_parent(dentry);
dput(dentry); - if (IS_ROOT(dentry)) { + if (dentry == parent) { dput(parent); return false; }
From: Yixian Liu liuyixian@huawei.com
[ Upstream commit ca088320a02537f36c243ac21794525d8eabb3bd ]
Current hns driver assigned the first two PBL page addresses from previous registered MR to the hardware when reregister MR changing the memory locations occurred. This will lead to PBL addressing error as the PBL has already been released. This patch fixes this wrong assignment by using the page address from new allocated PBL.
Fixes: a2c80b7b4119 ("RDMA/hns: Add rereg mr support for hip08") Signed-off-by: Yixian Liu liuyixian@huawei.com Signed-off-by: Jason Gunthorpe jgg@mellanox.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 128 ++++++++++----------- 1 file changed, 60 insertions(+), 68 deletions(-)
diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c index 0218c0f8c2a7..a442b29e7611 100644 --- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c +++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c @@ -1661,10 +1661,9 @@ static int hns_roce_v2_set_mac(struct hns_roce_dev *hr_dev, u8 phy_port, return hns_roce_cmq_send(hr_dev, &desc, 1); }
-static int hns_roce_v2_write_mtpt(void *mb_buf, struct hns_roce_mr *mr, - unsigned long mtpt_idx) +static int set_mtpt_pbl(struct hns_roce_v2_mpt_entry *mpt_entry, + struct hns_roce_mr *mr) { - struct hns_roce_v2_mpt_entry *mpt_entry; struct scatterlist *sg; u64 page_addr; u64 *pages; @@ -1672,6 +1671,53 @@ static int hns_roce_v2_write_mtpt(void *mb_buf, struct hns_roce_mr *mr, int len; int entry;
+ mpt_entry->pbl_size = cpu_to_le32(mr->pbl_size); + mpt_entry->pbl_ba_l = cpu_to_le32(lower_32_bits(mr->pbl_ba >> 3)); + roce_set_field(mpt_entry->byte_48_mode_ba, + V2_MPT_BYTE_48_PBL_BA_H_M, V2_MPT_BYTE_48_PBL_BA_H_S, + upper_32_bits(mr->pbl_ba >> 3)); + + pages = (u64 *)__get_free_page(GFP_KERNEL); + if (!pages) + return -ENOMEM; + + i = 0; + for_each_sg(mr->umem->sg_head.sgl, sg, mr->umem->nmap, entry) { + len = sg_dma_len(sg) >> PAGE_SHIFT; + for (j = 0; j < len; ++j) { + page_addr = sg_dma_address(sg) + + (j << mr->umem->page_shift); + pages[i] = page_addr >> 6; + /* Record the first 2 entry directly to MTPT table */ + if (i >= HNS_ROCE_V2_MAX_INNER_MTPT_NUM - 1) + goto found; + i++; + } + } +found: + mpt_entry->pa0_l = cpu_to_le32(lower_32_bits(pages[0])); + roce_set_field(mpt_entry->byte_56_pa0_h, V2_MPT_BYTE_56_PA0_H_M, + V2_MPT_BYTE_56_PA0_H_S, upper_32_bits(pages[0])); + + mpt_entry->pa1_l = cpu_to_le32(lower_32_bits(pages[1])); + roce_set_field(mpt_entry->byte_64_buf_pa1, V2_MPT_BYTE_64_PA1_H_M, + V2_MPT_BYTE_64_PA1_H_S, upper_32_bits(pages[1])); + roce_set_field(mpt_entry->byte_64_buf_pa1, + V2_MPT_BYTE_64_PBL_BUF_PG_SZ_M, + V2_MPT_BYTE_64_PBL_BUF_PG_SZ_S, + mr->pbl_buf_pg_sz + PG_SHIFT_OFFSET); + + free_page((unsigned long)pages); + + return 0; +} + +static int hns_roce_v2_write_mtpt(void *mb_buf, struct hns_roce_mr *mr, + unsigned long mtpt_idx) +{ + struct hns_roce_v2_mpt_entry *mpt_entry; + int ret; + mpt_entry = mb_buf; memset(mpt_entry, 0, sizeof(*mpt_entry));
@@ -1686,7 +1732,6 @@ static int hns_roce_v2_write_mtpt(void *mb_buf, struct hns_roce_mr *mr, mr->pbl_ba_pg_sz + PG_SHIFT_OFFSET); roce_set_field(mpt_entry->byte_4_pd_hop_st, V2_MPT_BYTE_4_PD_M, V2_MPT_BYTE_4_PD_S, mr->pd); - mpt_entry->byte_4_pd_hop_st = cpu_to_le32(mpt_entry->byte_4_pd_hop_st);
roce_set_bit(mpt_entry->byte_8_mw_cnt_en, V2_MPT_BYTE_8_RA_EN_S, 0); roce_set_bit(mpt_entry->byte_8_mw_cnt_en, V2_MPT_BYTE_8_R_INV_EN_S, 1); @@ -1700,13 +1745,11 @@ static int hns_roce_v2_write_mtpt(void *mb_buf, struct hns_roce_mr *mr, (mr->access & IB_ACCESS_REMOTE_WRITE ? 1 : 0)); roce_set_bit(mpt_entry->byte_8_mw_cnt_en, V2_MPT_BYTE_8_LW_EN_S, (mr->access & IB_ACCESS_LOCAL_WRITE ? 1 : 0)); - mpt_entry->byte_8_mw_cnt_en = cpu_to_le32(mpt_entry->byte_8_mw_cnt_en);
roce_set_bit(mpt_entry->byte_12_mw_pa, V2_MPT_BYTE_12_PA_S, mr->type == MR_TYPE_MR ? 0 : 1); roce_set_bit(mpt_entry->byte_12_mw_pa, V2_MPT_BYTE_12_INNER_PA_VLD_S, 1); - mpt_entry->byte_12_mw_pa = cpu_to_le32(mpt_entry->byte_12_mw_pa);
mpt_entry->len_l = cpu_to_le32(lower_32_bits(mr->size)); mpt_entry->len_h = cpu_to_le32(upper_32_bits(mr->size)); @@ -1717,53 +1760,9 @@ static int hns_roce_v2_write_mtpt(void *mb_buf, struct hns_roce_mr *mr, if (mr->type == MR_TYPE_DMA) return 0;
- mpt_entry->pbl_size = cpu_to_le32(mr->pbl_size); - - mpt_entry->pbl_ba_l = cpu_to_le32(lower_32_bits(mr->pbl_ba >> 3)); - roce_set_field(mpt_entry->byte_48_mode_ba, V2_MPT_BYTE_48_PBL_BA_H_M, - V2_MPT_BYTE_48_PBL_BA_H_S, - upper_32_bits(mr->pbl_ba >> 3)); - mpt_entry->byte_48_mode_ba = cpu_to_le32(mpt_entry->byte_48_mode_ba); - - pages = (u64 *)__get_free_page(GFP_KERNEL); - if (!pages) - return -ENOMEM; - - i = 0; - for_each_sg(mr->umem->sg_head.sgl, sg, mr->umem->nmap, entry) { - len = sg_dma_len(sg) >> PAGE_SHIFT; - for (j = 0; j < len; ++j) { - page_addr = sg_dma_address(sg) + - (j << mr->umem->page_shift); - pages[i] = page_addr >> 6; - - /* Record the first 2 entry directly to MTPT table */ - if (i >= HNS_ROCE_V2_MAX_INNER_MTPT_NUM - 1) - goto found; - i++; - } - } + ret = set_mtpt_pbl(mpt_entry, mr);
-found: - mpt_entry->pa0_l = cpu_to_le32(lower_32_bits(pages[0])); - roce_set_field(mpt_entry->byte_56_pa0_h, V2_MPT_BYTE_56_PA0_H_M, - V2_MPT_BYTE_56_PA0_H_S, - upper_32_bits(pages[0])); - mpt_entry->byte_56_pa0_h = cpu_to_le32(mpt_entry->byte_56_pa0_h); - - mpt_entry->pa1_l = cpu_to_le32(lower_32_bits(pages[1])); - roce_set_field(mpt_entry->byte_64_buf_pa1, V2_MPT_BYTE_64_PA1_H_M, - V2_MPT_BYTE_64_PA1_H_S, upper_32_bits(pages[1])); - - free_page((unsigned long)pages); - - roce_set_field(mpt_entry->byte_64_buf_pa1, - V2_MPT_BYTE_64_PBL_BUF_PG_SZ_M, - V2_MPT_BYTE_64_PBL_BUF_PG_SZ_S, - mr->pbl_buf_pg_sz + PG_SHIFT_OFFSET); - mpt_entry->byte_64_buf_pa1 = cpu_to_le32(mpt_entry->byte_64_buf_pa1); - - return 0; + return ret; }
static int hns_roce_v2_rereg_write_mtpt(struct hns_roce_dev *hr_dev, @@ -1772,6 +1771,7 @@ static int hns_roce_v2_rereg_write_mtpt(struct hns_roce_dev *hr_dev, u64 size, void *mb_buf) { struct hns_roce_v2_mpt_entry *mpt_entry = mb_buf; + int ret = 0;
if (flags & IB_MR_REREG_PD) { roce_set_field(mpt_entry->byte_4_pd_hop_st, V2_MPT_BYTE_4_PD_M, @@ -1784,14 +1784,14 @@ static int hns_roce_v2_rereg_write_mtpt(struct hns_roce_dev *hr_dev, V2_MPT_BYTE_8_BIND_EN_S, (mr_access_flags & IB_ACCESS_MW_BIND ? 1 : 0)); roce_set_bit(mpt_entry->byte_8_mw_cnt_en, - V2_MPT_BYTE_8_ATOMIC_EN_S, - (mr_access_flags & IB_ACCESS_REMOTE_ATOMIC ? 1 : 0)); + V2_MPT_BYTE_8_ATOMIC_EN_S, + mr_access_flags & IB_ACCESS_REMOTE_ATOMIC ? 1 : 0); roce_set_bit(mpt_entry->byte_8_mw_cnt_en, V2_MPT_BYTE_8_RR_EN_S, - (mr_access_flags & IB_ACCESS_REMOTE_READ ? 1 : 0)); + mr_access_flags & IB_ACCESS_REMOTE_READ ? 1 : 0); roce_set_bit(mpt_entry->byte_8_mw_cnt_en, V2_MPT_BYTE_8_RW_EN_S, - (mr_access_flags & IB_ACCESS_REMOTE_WRITE ? 1 : 0)); + mr_access_flags & IB_ACCESS_REMOTE_WRITE ? 1 : 0); roce_set_bit(mpt_entry->byte_8_mw_cnt_en, V2_MPT_BYTE_8_LW_EN_S, - (mr_access_flags & IB_ACCESS_LOCAL_WRITE ? 1 : 0)); + mr_access_flags & IB_ACCESS_LOCAL_WRITE ? 1 : 0); }
if (flags & IB_MR_REREG_TRANS) { @@ -1800,21 +1800,13 @@ static int hns_roce_v2_rereg_write_mtpt(struct hns_roce_dev *hr_dev, mpt_entry->len_l = cpu_to_le32(lower_32_bits(size)); mpt_entry->len_h = cpu_to_le32(upper_32_bits(size));
- mpt_entry->pbl_size = cpu_to_le32(mr->pbl_size); - mpt_entry->pbl_ba_l = - cpu_to_le32(lower_32_bits(mr->pbl_ba >> 3)); - roce_set_field(mpt_entry->byte_48_mode_ba, - V2_MPT_BYTE_48_PBL_BA_H_M, - V2_MPT_BYTE_48_PBL_BA_H_S, - upper_32_bits(mr->pbl_ba >> 3)); - mpt_entry->byte_48_mode_ba = - cpu_to_le32(mpt_entry->byte_48_mode_ba); - mr->iova = iova; mr->size = size; + + ret = set_mtpt_pbl(mpt_entry, mr); }
- return 0; + return ret; }
static void *get_cqe_v2(struct hns_roce_cq *hr_cq, int n)
From: Martynas Pumputis m@lambda.lt
[ Upstream commit 1efb6ee3edea57f57f9fb05dba8dcb3f7333f61f ]
A format string consisting of "%p" or "%s" followed by an invalid specifier (e.g. "%p%\n" or "%s%") could pass the check which would make format_decode (lib/vsprintf.c) to warn.
Fixes: 9c959c863f82 ("tracing: Allow BPF programs to call bpf_trace_printk()") Reported-by: syzbot+1ec5c5ec949c4adaa0c4@syzkaller.appspotmail.com Signed-off-by: Martynas Pumputis m@lambda.lt Signed-off-by: Daniel Borkmann daniel@iogearbox.net Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/trace/bpf_trace.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/kernel/trace/bpf_trace.c b/kernel/trace/bpf_trace.c index 08fcfe440c63..9864a35c8bb5 100644 --- a/kernel/trace/bpf_trace.c +++ b/kernel/trace/bpf_trace.c @@ -196,11 +196,13 @@ BPF_CALL_5(bpf_trace_printk, char *, fmt, u32, fmt_size, u64, arg1, i++; } else if (fmt[i] == 'p' || fmt[i] == 's') { mod[fmt_cnt]++; - i++; - if (!isspace(fmt[i]) && !ispunct(fmt[i]) && fmt[i] != 0) + /* disallow any further format extensions */ + if (fmt[i + 1] != 0 && + !isspace(fmt[i + 1]) && + !ispunct(fmt[i + 1])) return -EINVAL; fmt_cnt++; - if (fmt[i - 1] == 's') { + if (fmt[i] == 's') { if (str_seen) /* allow only one '%s' per fmt string */ return -EINVAL;
From: Arnd Bergmann arnd@arndb.de
[ Upstream commit 64999fa7aa2c076ec6d05aee481f11f5296ceb8c ]
In randconfig builds without CONFIG_GENERIC_ALLOCATOR, this driver fails to link:
ERROR: "gen_pool_alloc_algo" [drivers/fsi/fsi-master-ast-cf.ko] undefined! ERROR: "gen_pool_fixed_alloc" [drivers/fsi/fsi-master-ast-cf.ko] undefined! ERROR: "of_gen_pool_get" [drivers/fsi/fsi-master-ast-cf.ko] undefined! ERROR: "gen_pool_free" [drivers/fsi/fsi-master-ast-cf.ko] undefined!
Select the dependency as all other users do.
Fixes: 6a794a27daca ("fsi: master-ast-cf: Add new FSI master using Aspeed ColdFire") Signed-off-by: Arnd Bergmann arnd@arndb.de Signed-off-by: Benjamin Herrenschmidt benh@kernel.crashing.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/fsi/Kconfig | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/fsi/Kconfig b/drivers/fsi/Kconfig index af3a20dd5aa4..99c99a5d57fe 100644 --- a/drivers/fsi/Kconfig +++ b/drivers/fsi/Kconfig @@ -46,6 +46,7 @@ config FSI_MASTER_AST_CF tristate "FSI master based on Aspeed ColdFire coprocessor" depends on GPIOLIB depends on GPIO_ASPEED + select GENERIC_ALLOCATOR ---help--- This option enables a FSI master using the AST2400 and AST2500 GPIO lines driven by the internal ColdFire coprocessor. This requires
From: Xin Long lucien.xin@gmail.com
[ Upstream commit 2a31e4bd9ad255ee40809b5c798c4b1c2b09703b ]
ip_vs_dst_event is supposed to clean up all dst used in ipvs' destinations when a net dev is going down. But it works only when the dst's dev is the same as the dev from the event.
Now with the same priority but late registration, ip_vs_dst_notifier is always called later than ipv6_dev_notf where the dst's dev is set to lo for NETDEV_DOWN event.
As the dst's dev lo is not the same as the dev from the event in ip_vs_dst_event, ip_vs_dst_notifier doesn't actually work. Also as these dst have to wait for dest_trash_timer to clean them up. It would cause some non-permanent kernel warnings:
unregister_netdevice: waiting for br0 to become free. Usage count = 3
To fix it, call ip_vs_dst_notifier earlier than ipv6_dev_notf by increasing its priority to ADDRCONF_NOTIFY_PRIORITY + 5.
Note that for ipv4 route fib_netdev_notifier doesn't set dst's dev to lo in NETDEV_DOWN event, so this fix is only needed when IP_VS_IPV6 is defined.
Fixes: 7a4f0761fce3 ("IPVS: init and cleanup restructuring") Reported-by: Li Shuang shuali@redhat.com Signed-off-by: Xin Long lucien.xin@gmail.com Acked-by: Julian Anastasov ja@ssi.bg Acked-by: Simon Horman horms@verge.net.au Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/ipvs/ip_vs_ctl.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/net/netfilter/ipvs/ip_vs_ctl.c b/net/netfilter/ipvs/ip_vs_ctl.c index 62eefea48973..518364f4abcc 100644 --- a/net/netfilter/ipvs/ip_vs_ctl.c +++ b/net/netfilter/ipvs/ip_vs_ctl.c @@ -3980,6 +3980,9 @@ static void __net_exit ip_vs_control_net_cleanup_sysctl(struct netns_ipvs *ipvs)
static struct notifier_block ip_vs_dst_notifier = { .notifier_call = ip_vs_dst_event, +#ifdef CONFIG_IP_VS_IPV6 + .priority = ADDRCONF_NOTIFY_PRIORITY + 5, +#endif };
int __net_init ip_vs_control_net_init(struct netns_ipvs *ipvs)
From: Aaro Koskinen aaro.koskinen@iki.fi
[ Upstream commit 286afdde1640d8ea8916a0f05e811441fbbf4b9d ]
The current code fails to release the third irq on the error path (observed by reading the code), and we get also multiple WARNs with failing gadget drivers due to duplicate IRQ releases. Fix by using devm_request_irq().
Signed-off-by: Aaro Koskinen aaro.koskinen@iki.fi Signed-off-by: Felipe Balbi felipe.balbi@linux.intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/gadget/udc/omap_udc.c | 37 +++++++++---------------------- 1 file changed, 10 insertions(+), 27 deletions(-)
diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c index 3a16431da321..1c77218c82af 100644 --- a/drivers/usb/gadget/udc/omap_udc.c +++ b/drivers/usb/gadget/udc/omap_udc.c @@ -2867,8 +2867,8 @@ static int omap_udc_probe(struct platform_device *pdev) udc->clr_halt = UDC_RESET_EP;
/* USB general purpose IRQ: ep0, state changes, dma, etc */ - status = request_irq(pdev->resource[1].start, omap_udc_irq, - 0, driver_name, udc); + status = devm_request_irq(&pdev->dev, pdev->resource[1].start, + omap_udc_irq, 0, driver_name, udc); if (status != 0) { ERR("can't get irq %d, err %d\n", (int) pdev->resource[1].start, status); @@ -2876,20 +2876,20 @@ static int omap_udc_probe(struct platform_device *pdev) }
/* USB "non-iso" IRQ (PIO for all but ep0) */ - status = request_irq(pdev->resource[2].start, omap_udc_pio_irq, - 0, "omap_udc pio", udc); + status = devm_request_irq(&pdev->dev, pdev->resource[2].start, + omap_udc_pio_irq, 0, "omap_udc pio", udc); if (status != 0) { ERR("can't get irq %d, err %d\n", (int) pdev->resource[2].start, status); - goto cleanup2; + goto cleanup1; } #ifdef USE_ISO - status = request_irq(pdev->resource[3].start, omap_udc_iso_irq, - 0, "omap_udc iso", udc); + status = devm_request_irq(&pdev->dev, pdev->resource[3].start, + omap_udc_iso_irq, 0, "omap_udc iso", udc); if (status != 0) { ERR("can't get irq %d, err %d\n", (int) pdev->resource[3].start, status); - goto cleanup3; + goto cleanup1; } #endif if (cpu_is_omap16xx() || cpu_is_omap7xx()) { @@ -2902,22 +2902,11 @@ static int omap_udc_probe(struct platform_device *pdev) create_proc_file(); status = usb_add_gadget_udc_release(&pdev->dev, &udc->gadget, omap_udc_release); - if (status) - goto cleanup4; - - return 0; + if (!status) + return 0;
-cleanup4: remove_proc_file();
-#ifdef USE_ISO -cleanup3: - free_irq(pdev->resource[2].start, udc); -#endif - -cleanup2: - free_irq(pdev->resource[1].start, udc); - cleanup1: kfree(udc); udc = NULL; @@ -2961,12 +2950,6 @@ static int omap_udc_remove(struct platform_device *pdev)
remove_proc_file();
-#ifdef USE_ISO - free_irq(pdev->resource[3].start, udc); -#endif - free_irq(pdev->resource[2].start, udc); - free_irq(pdev->resource[1].start, udc); - if (udc->dc_clk) { if (udc->clk_requested) omap_udc_enable_clock(0);
From: Aaro Koskinen aaro.koskinen@iki.fi
[ Upstream commit 99f700366fcea1aa2fa3c49c99f371670c3c62f8 ]
We currently crash if usb_add_gadget_udc_release() fails, since the udc->done is not initialized until in the remove function. Furthermore, on module removal the udc data is accessed although the release function is already triggered by usb_del_gadget_udc() early in the function.
Fix by rewriting the release and remove functions, basically moving all the cleanup into the release function, and doing the completion only in the module removal case.
The patch fixes omap_udc module probe with a failing gadged, and also allows the removal of omap_udc. Tested by running "modprobe omap_udc; modprobe -r omap_udc" in a loop.
Signed-off-by: Aaro Koskinen aaro.koskinen@iki.fi Signed-off-by: Felipe Balbi felipe.balbi@linux.intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/gadget/udc/omap_udc.c | 50 ++++++++++++------------------- 1 file changed, 19 insertions(+), 31 deletions(-)
diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c index 1c77218c82af..240ccba44592 100644 --- a/drivers/usb/gadget/udc/omap_udc.c +++ b/drivers/usb/gadget/udc/omap_udc.c @@ -2593,9 +2593,22 @@ omap_ep_setup(char *name, u8 addr, u8 type,
static void omap_udc_release(struct device *dev) { - complete(udc->done); + pullup_disable(udc); + if (!IS_ERR_OR_NULL(udc->transceiver)) { + usb_put_phy(udc->transceiver); + udc->transceiver = NULL; + } + omap_writew(0, UDC_SYSCON1); + remove_proc_file(); + if (udc->dc_clk) { + if (udc->clk_requested) + omap_udc_enable_clock(0); + clk_put(udc->hhc_clk); + clk_put(udc->dc_clk); + } + if (udc->done) + complete(udc->done); kfree(udc); - udc = NULL; }
static int @@ -2900,12 +2913,8 @@ static int omap_udc_probe(struct platform_device *pdev) }
create_proc_file(); - status = usb_add_gadget_udc_release(&pdev->dev, &udc->gadget, - omap_udc_release); - if (!status) - return 0; - - remove_proc_file(); + return usb_add_gadget_udc_release(&pdev->dev, &udc->gadget, + omap_udc_release);
cleanup1: kfree(udc); @@ -2932,36 +2941,15 @@ static int omap_udc_remove(struct platform_device *pdev) { DECLARE_COMPLETION_ONSTACK(done);
- if (!udc) - return -ENODEV; - - usb_del_gadget_udc(&udc->gadget); - if (udc->driver) - return -EBUSY; - udc->done = &done;
- pullup_disable(udc); - if (!IS_ERR_OR_NULL(udc->transceiver)) { - usb_put_phy(udc->transceiver); - udc->transceiver = NULL; - } - omap_writew(0, UDC_SYSCON1); - - remove_proc_file(); + usb_del_gadget_udc(&udc->gadget);
- if (udc->dc_clk) { - if (udc->clk_requested) - omap_udc_enable_clock(0); - clk_put(udc->hhc_clk); - clk_put(udc->dc_clk); - } + wait_for_completion(&done);
release_mem_region(pdev->resource[0].start, pdev->resource[0].end - pdev->resource[0].start + 1);
- wait_for_completion(&done); - return 0; }
From: Aaro Koskinen aaro.koskinen@iki.fi
[ Upstream commit 6ca6695f576b8453fe68865e84d25946d63b10ad ]
On OMAP 15xx machines there are no transceivers, and omap_udc_start() always fails as it forgot to adjust the default return value.
Signed-off-by: Aaro Koskinen aaro.koskinen@iki.fi Signed-off-by: Felipe Balbi felipe.balbi@linux.intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/gadget/udc/omap_udc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c index 240ccba44592..33250e569af8 100644 --- a/drivers/usb/gadget/udc/omap_udc.c +++ b/drivers/usb/gadget/udc/omap_udc.c @@ -2041,7 +2041,7 @@ static inline int machine_without_vbus_sense(void) static int omap_udc_start(struct usb_gadget *g, struct usb_gadget_driver *driver) { - int status = -ENODEV; + int status; struct omap_ep *ep; unsigned long flags;
@@ -2079,6 +2079,7 @@ static int omap_udc_start(struct usb_gadget *g, goto done; } } else { + status = 0; if (can_pullup(udc)) pullup_enable(udc); else
From: Aaro Koskinen aaro.koskinen@iki.fi
[ Upstream commit 2c2322fbcab8102b8cadc09d66714700a2da42c2 ]
On Palm TE nothing happens when you try to use gadget drivers and plug the USB cable. Fix by adding the board to the vbus sense quirk list.
Signed-off-by: Aaro Koskinen aaro.koskinen@iki.fi Signed-off-by: Felipe Balbi felipe.balbi@linux.intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/gadget/udc/omap_udc.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c index 33250e569af8..9b23e04c8f02 100644 --- a/drivers/usb/gadget/udc/omap_udc.c +++ b/drivers/usb/gadget/udc/omap_udc.c @@ -2033,6 +2033,7 @@ static inline int machine_without_vbus_sense(void) { return machine_is_omap_innovator() || machine_is_omap_osk() + || machine_is_omap_palmte() || machine_is_sx1() /* No known omap7xx boards with vbus sense */ || cpu_is_omap7xx();
From: Aaro Koskinen aaro.koskinen@iki.fi
[ Upstream commit 069caf5950dfa75d0526cd89c439ff9d9d3136d8 ]
Commit 387f869d2579 ("usb: gadget: u_ether: conditionally align transfer size") started aligning transfer size only if requested, breaking omap_udc DMA mode. Set quirk_ep_out_aligned_size to restore the old behaviour.
Fixes: 387f869d2579 ("usb: gadget: u_ether: conditionally align transfer size") Signed-off-by: Aaro Koskinen aaro.koskinen@iki.fi Signed-off-by: Felipe Balbi felipe.balbi@linux.intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/gadget/udc/omap_udc.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c index 9b23e04c8f02..fcf13ef33b31 100644 --- a/drivers/usb/gadget/udc/omap_udc.c +++ b/drivers/usb/gadget/udc/omap_udc.c @@ -2642,6 +2642,7 @@ omap_udc_setup(struct platform_device *odev, struct usb_phy *xceiv) udc->gadget.speed = USB_SPEED_UNKNOWN; udc->gadget.max_speed = USB_SPEED_FULL; udc->gadget.name = driver_name; + udc->gadget.quirk_ep_out_aligned_size = 1; udc->transceiver = xceiv;
/* ep0 is special; put it right after the SETUP buffer */
From: Mika Westerberg mika.westerberg@linux.intel.com
[ Upstream commit 1830b6eeda1fed42d85f2388f79c926331a9b2d0 ]
During NVM upgrade process the host router is hot-removed for a short while. During this time it is possible that the root port is moved into D3cold which would be fine if the root port could trigger PME on itself. However, many systems actually do not implement it so what happens is that the root port goes into D3cold and never wakes up unless userspace does PCI config space access, such as running 'lscpi'.
For this reason we explicitly prevent the root port from runtime suspending during NVM upgrade.
Signed-off-by: Mika Westerberg mika.westerberg@linux.intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/thunderbolt/switch.c | 40 ++++++++++++++++++++++++++++++++++-- 1 file changed, 38 insertions(+), 2 deletions(-)
diff --git a/drivers/thunderbolt/switch.c b/drivers/thunderbolt/switch.c index 7442bc4c6433..dd9ae6f5d19c 100644 --- a/drivers/thunderbolt/switch.c +++ b/drivers/thunderbolt/switch.c @@ -864,6 +864,30 @@ static ssize_t key_store(struct device *dev, struct device_attribute *attr, } static DEVICE_ATTR(key, 0600, key_show, key_store);
+static void nvm_authenticate_start(struct tb_switch *sw) +{ + struct pci_dev *root_port; + + /* + * During host router NVM upgrade we should not allow root port to + * go into D3cold because some root ports cannot trigger PME + * itself. To be on the safe side keep the root port in D0 during + * the whole upgrade process. + */ + root_port = pci_find_pcie_root_port(sw->tb->nhi->pdev); + if (root_port) + pm_runtime_get_noresume(&root_port->dev); +} + +static void nvm_authenticate_complete(struct tb_switch *sw) +{ + struct pci_dev *root_port; + + root_port = pci_find_pcie_root_port(sw->tb->nhi->pdev); + if (root_port) + pm_runtime_put(&root_port->dev); +} + static ssize_t nvm_authenticate_show(struct device *dev, struct device_attribute *attr, char *buf) { @@ -913,10 +937,18 @@ static ssize_t nvm_authenticate_store(struct device *dev,
sw->nvm->authenticating = true;
- if (!tb_route(sw)) + if (!tb_route(sw)) { + /* + * Keep root port from suspending as long as the + * NVM upgrade process is running. + */ + nvm_authenticate_start(sw); ret = nvm_authenticate_host(sw); - else + if (ret) + nvm_authenticate_complete(sw); + } else { ret = nvm_authenticate_device(sw); + } pm_runtime_mark_last_busy(&sw->dev); pm_runtime_put_autosuspend(&sw->dev); } @@ -1336,6 +1368,10 @@ static int tb_switch_add_dma_port(struct tb_switch *sw) if (ret <= 0) return ret;
+ /* Now we can allow root port to suspend again */ + if (!tb_route(sw)) + nvm_authenticate_complete(sw); + if (status) { tb_sw_info(sw, "switch flash authentication failed\n"); tb_switch_set_uuid(sw);
From: Christian Hewitt christianshewitt@gmail.com
[ Upstream commit 31e1ab494559fb46de304cc6c2aed1528f94b298 ]
This essential mode for PAL users is missing, so add it.
Fixes: 335e3713afb87 ("drm/meson: Add support for HDMI venc modes and settings") Signed-off-by: Christian Hewitt christianshewitt@gmail.com Acked-by: Neil Armstrong narmstrong@baylibre.com Signed-off-by: Neil Armstrong narmstrong@baylibre.com Link: https://patchwork.freedesktop.org/patch/msgid/1542793169-13008-1-git-send-em... Signed-off-by: Sean Paul seanpaul@chromium.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/meson/meson_venc.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/gpu/drm/meson/meson_venc.c b/drivers/gpu/drm/meson/meson_venc.c index 514245e69b38..0a437a16ad0c 100644 --- a/drivers/gpu/drm/meson/meson_venc.c +++ b/drivers/gpu/drm/meson/meson_venc.c @@ -714,6 +714,7 @@ struct meson_hdmi_venc_vic_mode { { 5, &meson_hdmi_encp_mode_1080i60 }, { 20, &meson_hdmi_encp_mode_1080i50 }, { 32, &meson_hdmi_encp_mode_1080p24 }, + { 33, &meson_hdmi_encp_mode_1080p50 }, { 34, &meson_hdmi_encp_mode_1080p30 }, { 31, &meson_hdmi_encp_mode_1080p50 }, { 16, &meson_hdmi_encp_mode_1080p60 },
From: Alin Nastac alin.nastac@gmail.com
[ Upstream commit 508b09046c0f21678652fb66fd1e9959d55591d2 ]
When ip6_route_me_harder is invoked, it resets outgoing interface of: - link-local scoped packets sent by neighbor discovery - multicast packets sent by MLD host - multicast packets send by MLD proxy daemon that sets outgoing interface through IPV6_PKTINFO ipi6_ifindex
Link-local and multicast packets must keep their original oif after ip6_route_me_harder is called.
Signed-off-by: Alin Nastac alin.nastac@gmail.com Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/ipv6/netfilter.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/net/ipv6/netfilter.c b/net/ipv6/netfilter.c index 5ae8e1c51079..8b075f0bc351 100644 --- a/net/ipv6/netfilter.c +++ b/net/ipv6/netfilter.c @@ -24,7 +24,8 @@ int ip6_route_me_harder(struct net *net, struct sk_buff *skb) unsigned int hh_len; struct dst_entry *dst; struct flowi6 fl6 = { - .flowi6_oif = sk ? sk->sk_bound_dev_if : 0, + .flowi6_oif = sk && sk->sk_bound_dev_if ? sk->sk_bound_dev_if : + rt6_need_strict(&iph->daddr) ? skb_dst(skb)->dev->ifindex : 0, .flowi6_mark = skb->mark, .flowi6_uid = sock_net_uid(net, sk), .daddr = iph->daddr,
From: Artemy Kovalyov artemyko@mellanox.com
[ Upstream commit 75b7b86bdb0df37e08e44b6c1f99010967f81944 ]
Memory windows are implemented with an indirect MKey, when a page fault event comes for a MW Mkey we need to find the MR at the end of the list of the indirect MKeys by iterating on all items from the first to the last.
The offset calculated during this process has to be zeroed after the first iteration or the next iteration will start from a wrong address, resulting incorrect ODP faulting behavior.
Fixes: db570d7deafb ("IB/mlx5: Add ODP support to MW") Signed-off-by: Artemy Kovalyov artemyko@mellanox.com Signed-off-by: Moni Shoua monis@mellanox.com Signed-off-by: Leon Romanovsky leonro@mellanox.com Signed-off-by: Jason Gunthorpe jgg@mellanox.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/infiniband/hw/mlx5/odp.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/infiniband/hw/mlx5/odp.c b/drivers/infiniband/hw/mlx5/odp.c index d216e0d2921d..9e1cac8cb260 100644 --- a/drivers/infiniband/hw/mlx5/odp.c +++ b/drivers/infiniband/hw/mlx5/odp.c @@ -724,6 +724,7 @@ static int pagefault_single_data_segment(struct mlx5_ib_dev *dev, head = frame;
bcnt -= frame->bcnt; + offset = 0; } break;
From: Taehee Yoo ap420073@gmail.com
[ Upstream commit 584eab291c67894cb17cc87544b9d086228ea70f ]
register_{netdevice/inetaddr/inet6addr}_notifier may return an error value, this patch adds the code to handle these error paths.
Signed-off-by: Taehee Yoo ap420073@gmail.com Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- .../net/netfilter/ipv4/nf_nat_masquerade.h | 2 +- .../net/netfilter/ipv6/nf_nat_masquerade.h | 2 +- net/ipv4/netfilter/ipt_MASQUERADE.c | 7 ++-- net/ipv4/netfilter/nf_nat_masquerade_ipv4.c | 21 +++++++++--- net/ipv4/netfilter/nft_masq_ipv4.c | 4 ++- net/ipv6/netfilter/ip6t_MASQUERADE.c | 8 +++-- net/ipv6/netfilter/nf_nat_masquerade_ipv6.c | 32 +++++++++++++------ net/ipv6/netfilter/nft_masq_ipv6.c | 4 ++- net/netfilter/nft_flow_offload.c | 5 ++- 9 files changed, 63 insertions(+), 22 deletions(-)
diff --git a/include/net/netfilter/ipv4/nf_nat_masquerade.h b/include/net/netfilter/ipv4/nf_nat_masquerade.h index cd24be4c4a99..13d55206bb9f 100644 --- a/include/net/netfilter/ipv4/nf_nat_masquerade.h +++ b/include/net/netfilter/ipv4/nf_nat_masquerade.h @@ -9,7 +9,7 @@ nf_nat_masquerade_ipv4(struct sk_buff *skb, unsigned int hooknum, const struct nf_nat_range2 *range, const struct net_device *out);
-void nf_nat_masquerade_ipv4_register_notifier(void); +int nf_nat_masquerade_ipv4_register_notifier(void); void nf_nat_masquerade_ipv4_unregister_notifier(void);
#endif /*_NF_NAT_MASQUERADE_IPV4_H_ */ diff --git a/include/net/netfilter/ipv6/nf_nat_masquerade.h b/include/net/netfilter/ipv6/nf_nat_masquerade.h index 0c3b5ebf0bb8..2917bf95c437 100644 --- a/include/net/netfilter/ipv6/nf_nat_masquerade.h +++ b/include/net/netfilter/ipv6/nf_nat_masquerade.h @@ -5,7 +5,7 @@ unsigned int nf_nat_masquerade_ipv6(struct sk_buff *skb, const struct nf_nat_range2 *range, const struct net_device *out); -void nf_nat_masquerade_ipv6_register_notifier(void); +int nf_nat_masquerade_ipv6_register_notifier(void); void nf_nat_masquerade_ipv6_unregister_notifier(void);
#endif /* _NF_NAT_MASQUERADE_IPV6_H_ */ diff --git a/net/ipv4/netfilter/ipt_MASQUERADE.c b/net/ipv4/netfilter/ipt_MASQUERADE.c index ce1512b02cb2..fd3f9e8a74da 100644 --- a/net/ipv4/netfilter/ipt_MASQUERADE.c +++ b/net/ipv4/netfilter/ipt_MASQUERADE.c @@ -81,9 +81,12 @@ static int __init masquerade_tg_init(void) int ret;
ret = xt_register_target(&masquerade_tg_reg); + if (ret) + return ret;
- if (ret == 0) - nf_nat_masquerade_ipv4_register_notifier(); + ret = nf_nat_masquerade_ipv4_register_notifier(); + if (ret) + xt_unregister_target(&masquerade_tg_reg);
return ret; } diff --git a/net/ipv4/netfilter/nf_nat_masquerade_ipv4.c b/net/ipv4/netfilter/nf_nat_masquerade_ipv4.c index ad3aeff152ed..4a7c1f207d6e 100644 --- a/net/ipv4/netfilter/nf_nat_masquerade_ipv4.c +++ b/net/ipv4/netfilter/nf_nat_masquerade_ipv4.c @@ -133,16 +133,29 @@ static struct notifier_block masq_inet_notifier = {
static atomic_t masquerade_notifier_refcount = ATOMIC_INIT(0);
-void nf_nat_masquerade_ipv4_register_notifier(void) +int nf_nat_masquerade_ipv4_register_notifier(void) { + int ret; + /* check if the notifier was already set */ if (atomic_inc_return(&masquerade_notifier_refcount) > 1) - return; + return 0;
/* Register for device down reports */ - register_netdevice_notifier(&masq_dev_notifier); + ret = register_netdevice_notifier(&masq_dev_notifier); + if (ret) + goto err_dec; /* Register IP address change reports */ - register_inetaddr_notifier(&masq_inet_notifier); + ret = register_inetaddr_notifier(&masq_inet_notifier); + if (ret) + goto err_unregister; + + return ret; +err_unregister: + unregister_netdevice_notifier(&masq_dev_notifier); +err_dec: + atomic_dec(&masquerade_notifier_refcount); + return ret; } EXPORT_SYMBOL_GPL(nf_nat_masquerade_ipv4_register_notifier);
diff --git a/net/ipv4/netfilter/nft_masq_ipv4.c b/net/ipv4/netfilter/nft_masq_ipv4.c index f1193e1e928a..6847de1d1db8 100644 --- a/net/ipv4/netfilter/nft_masq_ipv4.c +++ b/net/ipv4/netfilter/nft_masq_ipv4.c @@ -69,7 +69,9 @@ static int __init nft_masq_ipv4_module_init(void) if (ret < 0) return ret;
- nf_nat_masquerade_ipv4_register_notifier(); + ret = nf_nat_masquerade_ipv4_register_notifier(); + if (ret) + nft_unregister_expr(&nft_masq_ipv4_type);
return ret; } diff --git a/net/ipv6/netfilter/ip6t_MASQUERADE.c b/net/ipv6/netfilter/ip6t_MASQUERADE.c index 491f808e356a..29c7f1915a96 100644 --- a/net/ipv6/netfilter/ip6t_MASQUERADE.c +++ b/net/ipv6/netfilter/ip6t_MASQUERADE.c @@ -58,8 +58,12 @@ static int __init masquerade_tg6_init(void) int err;
err = xt_register_target(&masquerade_tg6_reg); - if (err == 0) - nf_nat_masquerade_ipv6_register_notifier(); + if (err) + return err; + + err = nf_nat_masquerade_ipv6_register_notifier(); + if (err) + xt_unregister_target(&masquerade_tg6_reg);
return err; } diff --git a/net/ipv6/netfilter/nf_nat_masquerade_ipv6.c b/net/ipv6/netfilter/nf_nat_masquerade_ipv6.c index e6eb7cf9b54f..10012fc687b6 100644 --- a/net/ipv6/netfilter/nf_nat_masquerade_ipv6.c +++ b/net/ipv6/netfilter/nf_nat_masquerade_ipv6.c @@ -120,8 +120,8 @@ static void iterate_cleanup_work(struct work_struct *work) * of ipv6 addresses being deleted), we also need to add an upper * limit to the number of queued work items. */ -static int masq_inet_event(struct notifier_block *this, - unsigned long event, void *ptr) +static int masq_inet6_event(struct notifier_block *this, + unsigned long event, void *ptr) { struct inet6_ifaddr *ifa = ptr; const struct net_device *dev; @@ -158,20 +158,34 @@ static int masq_inet_event(struct notifier_block *this, return NOTIFY_DONE; }
-static struct notifier_block masq_inet_notifier = { - .notifier_call = masq_inet_event, +static struct notifier_block masq_inet6_notifier = { + .notifier_call = masq_inet6_event, };
static atomic_t masquerade_notifier_refcount = ATOMIC_INIT(0);
-void nf_nat_masquerade_ipv6_register_notifier(void) +int nf_nat_masquerade_ipv6_register_notifier(void) { + int ret; + /* check if the notifier is already set */ if (atomic_inc_return(&masquerade_notifier_refcount) > 1) - return; + return 0;
- register_netdevice_notifier(&masq_dev_notifier); - register_inet6addr_notifier(&masq_inet_notifier); + ret = register_netdevice_notifier(&masq_dev_notifier); + if (ret) + goto err_dec; + + ret = register_inet6addr_notifier(&masq_inet6_notifier); + if (ret) + goto err_unregister; + + return ret; +err_unregister: + unregister_netdevice_notifier(&masq_dev_notifier); +err_dec: + atomic_dec(&masquerade_notifier_refcount); + return ret; } EXPORT_SYMBOL_GPL(nf_nat_masquerade_ipv6_register_notifier);
@@ -181,7 +195,7 @@ void nf_nat_masquerade_ipv6_unregister_notifier(void) if (atomic_dec_return(&masquerade_notifier_refcount) > 0) return;
- unregister_inet6addr_notifier(&masq_inet_notifier); + unregister_inet6addr_notifier(&masq_inet6_notifier); unregister_netdevice_notifier(&masq_dev_notifier); } EXPORT_SYMBOL_GPL(nf_nat_masquerade_ipv6_unregister_notifier); diff --git a/net/ipv6/netfilter/nft_masq_ipv6.c b/net/ipv6/netfilter/nft_masq_ipv6.c index dd0122f3cffe..e06c82e9dfcd 100644 --- a/net/ipv6/netfilter/nft_masq_ipv6.c +++ b/net/ipv6/netfilter/nft_masq_ipv6.c @@ -70,7 +70,9 @@ static int __init nft_masq_ipv6_module_init(void) if (ret < 0) return ret;
- nf_nat_masquerade_ipv6_register_notifier(); + ret = nf_nat_masquerade_ipv6_register_notifier(); + if (ret) + nft_unregister_expr(&nft_masq_ipv6_type);
return ret; } diff --git a/net/netfilter/nft_flow_offload.c b/net/netfilter/nft_flow_offload.c index d6bab8c3cbb0..5fd4c57c79cc 100644 --- a/net/netfilter/nft_flow_offload.c +++ b/net/netfilter/nft_flow_offload.c @@ -214,7 +214,9 @@ static int __init nft_flow_offload_module_init(void) { int err;
- register_netdevice_notifier(&flow_offload_netdev_notifier); + err = register_netdevice_notifier(&flow_offload_netdev_notifier); + if (err) + goto err;
err = nft_register_expr(&nft_flow_offload_type); if (err < 0) @@ -224,6 +226,7 @@ static int __init nft_flow_offload_module_init(void)
register_expr: unregister_netdevice_notifier(&flow_offload_netdev_notifier); +err: return err; }
From: Taehee Yoo ap420073@gmail.com
[ Upstream commit 095faf45e64be00bff4da2d6182dface3d69c9b7 ]
There is a reference counter to ensure that masquerade modules register notifiers only once. However, the existing reference counter approach is not safe, test commands are:
while : do modprobe ip6t_MASQUERADE & modprobe nft_masq_ipv6 & modprobe -rv ip6t_MASQUERADE & modprobe -rv nft_masq_ipv6 & done
numbers below represent the reference counter. -------------------------------------------------------- CPU0 CPU1 CPU2 CPU3 CPU4 [insmod] [insmod] [rmmod] [rmmod] [insmod] -------------------------------------------------------- 0->1 register 1->2 returns 2->1 returns 1->0 0->1 register <-- unregister --------------------------------------------------------
The unregistation of CPU3 should be processed before the registration of CPU4.
In order to fix this, use a mutex instead of reference counter.
splat looks like: [ 323.869557] watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [modprobe:1381] [ 323.869574] Modules linked in: nf_tables(+) nf_nat_ipv6(-) nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 n] [ 323.869574] irq event stamp: 194074 [ 323.898930] hardirqs last enabled at (194073): [<ffffffff90004a0d>] trace_hardirqs_on_thunk+0x1a/0x1c [ 323.898930] hardirqs last disabled at (194074): [<ffffffff90004a29>] trace_hardirqs_off_thunk+0x1a/0x1c [ 323.898930] softirqs last enabled at (182132): [<ffffffff922006ec>] __do_softirq+0x6ec/0xa3b [ 323.898930] softirqs last disabled at (182109): [<ffffffff90193426>] irq_exit+0x1a6/0x1e0 [ 323.898930] CPU: 0 PID: 1381 Comm: modprobe Not tainted 4.20.0-rc2+ #27 [ 323.898930] RIP: 0010:raw_notifier_chain_register+0xea/0x240 [ 323.898930] Code: 3c 03 0f 8e f2 00 00 00 44 3b 6b 10 7f 4d 49 bc 00 00 00 00 00 fc ff df eb 22 48 8d 7b 10 488 [ 323.898930] RSP: 0018:ffff888101597218 EFLAGS: 00000206 ORIG_RAX: ffffffffffffff13 [ 323.898930] RAX: 0000000000000000 RBX: ffffffffc04361c0 RCX: 0000000000000000 [ 323.898930] RDX: 1ffffffff26132ae RSI: ffffffffc04aa3c0 RDI: ffffffffc04361d0 [ 323.898930] RBP: ffffffffc04361c8 R08: 0000000000000000 R09: 0000000000000001 [ 323.898930] R10: ffff8881015972b0 R11: fffffbfff26132c4 R12: dffffc0000000000 [ 323.898930] R13: 0000000000000000 R14: 1ffff110202b2e44 R15: ffffffffc04aa3c0 [ 323.898930] FS: 00007f813ed41540(0000) GS:ffff88811ae00000(0000) knlGS:0000000000000000 [ 323.898930] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 323.898930] CR2: 0000559bf2c9f120 CR3: 000000010bc80000 CR4: 00000000001006f0 [ 323.898930] Call Trace: [ 323.898930] ? atomic_notifier_chain_register+0x2d0/0x2d0 [ 323.898930] ? down_read+0x150/0x150 [ 323.898930] ? sched_clock_cpu+0x126/0x170 [ 323.898930] ? nf_tables_core_module_init+0xe4/0xe4 [nf_tables] [ 323.898930] ? nf_tables_core_module_init+0xe4/0xe4 [nf_tables] [ 323.898930] register_netdevice_notifier+0xbb/0x790 [ 323.898930] ? __dev_close_many+0x2d0/0x2d0 [ 323.898930] ? __mutex_unlock_slowpath+0x17f/0x740 [ 323.898930] ? wait_for_completion+0x710/0x710 [ 323.898930] ? nf_tables_core_module_init+0xe4/0xe4 [nf_tables] [ 323.898930] ? up_write+0x6c/0x210 [ 323.898930] ? nf_tables_core_module_init+0xe4/0xe4 [nf_tables] [ 324.127073] ? nf_tables_core_module_init+0xe4/0xe4 [nf_tables] [ 324.127073] nft_chain_filter_init+0x1e/0xe8a [nf_tables] [ 324.127073] nf_tables_module_init+0x37/0x92 [nf_tables] [ ... ]
Fixes: 8dd33cc93ec9 ("netfilter: nf_nat: generalize IPv4 masquerading support for nf_tables") Fixes: be6b635cd674 ("netfilter: nf_nat: generalize IPv6 masquerading support for nf_tables") Signed-off-by: Taehee Yoo ap420073@gmail.com Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org
Signed-off-by: Sasha Levin sashal@kernel.org --- net/ipv4/netfilter/nf_nat_masquerade_ipv4.c | 23 ++++++++++++++------- net/ipv6/netfilter/nf_nat_masquerade_ipv6.c | 23 ++++++++++++++------- 2 files changed, 32 insertions(+), 14 deletions(-)
diff --git a/net/ipv4/netfilter/nf_nat_masquerade_ipv4.c b/net/ipv4/netfilter/nf_nat_masquerade_ipv4.c index 4a7c1f207d6e..4c7fcd32f8e6 100644 --- a/net/ipv4/netfilter/nf_nat_masquerade_ipv4.c +++ b/net/ipv4/netfilter/nf_nat_masquerade_ipv4.c @@ -131,15 +131,17 @@ static struct notifier_block masq_inet_notifier = { .notifier_call = masq_inet_event, };
-static atomic_t masquerade_notifier_refcount = ATOMIC_INIT(0); +static int masq_refcnt; +static DEFINE_MUTEX(masq_mutex);
int nf_nat_masquerade_ipv4_register_notifier(void) { - int ret; + int ret = 0;
+ mutex_lock(&masq_mutex); /* check if the notifier was already set */ - if (atomic_inc_return(&masquerade_notifier_refcount) > 1) - return 0; + if (++masq_refcnt > 1) + goto out_unlock;
/* Register for device down reports */ ret = register_netdevice_notifier(&masq_dev_notifier); @@ -150,22 +152,29 @@ int nf_nat_masquerade_ipv4_register_notifier(void) if (ret) goto err_unregister;
+ mutex_unlock(&masq_mutex); return ret; + err_unregister: unregister_netdevice_notifier(&masq_dev_notifier); err_dec: - atomic_dec(&masquerade_notifier_refcount); + masq_refcnt--; +out_unlock: + mutex_unlock(&masq_mutex); return ret; } EXPORT_SYMBOL_GPL(nf_nat_masquerade_ipv4_register_notifier);
void nf_nat_masquerade_ipv4_unregister_notifier(void) { + mutex_lock(&masq_mutex); /* check if the notifier still has clients */ - if (atomic_dec_return(&masquerade_notifier_refcount) > 0) - return; + if (--masq_refcnt > 0) + goto out_unlock;
unregister_netdevice_notifier(&masq_dev_notifier); unregister_inetaddr_notifier(&masq_inet_notifier); +out_unlock: + mutex_unlock(&masq_mutex); } EXPORT_SYMBOL_GPL(nf_nat_masquerade_ipv4_unregister_notifier); diff --git a/net/ipv6/netfilter/nf_nat_masquerade_ipv6.c b/net/ipv6/netfilter/nf_nat_masquerade_ipv6.c index 10012fc687b6..37b1d413c825 100644 --- a/net/ipv6/netfilter/nf_nat_masquerade_ipv6.c +++ b/net/ipv6/netfilter/nf_nat_masquerade_ipv6.c @@ -162,15 +162,17 @@ static struct notifier_block masq_inet6_notifier = { .notifier_call = masq_inet6_event, };
-static atomic_t masquerade_notifier_refcount = ATOMIC_INIT(0); +static int masq_refcnt; +static DEFINE_MUTEX(masq_mutex);
int nf_nat_masquerade_ipv6_register_notifier(void) { - int ret; + int ret = 0;
+ mutex_lock(&masq_mutex); /* check if the notifier is already set */ - if (atomic_inc_return(&masquerade_notifier_refcount) > 1) - return 0; + if (++masq_refcnt > 1) + goto out_unlock;
ret = register_netdevice_notifier(&masq_dev_notifier); if (ret) @@ -180,22 +182,29 @@ int nf_nat_masquerade_ipv6_register_notifier(void) if (ret) goto err_unregister;
+ mutex_unlock(&masq_mutex); return ret; + err_unregister: unregister_netdevice_notifier(&masq_dev_notifier); err_dec: - atomic_dec(&masquerade_notifier_refcount); + masq_refcnt--; +out_unlock: + mutex_unlock(&masq_mutex); return ret; } EXPORT_SYMBOL_GPL(nf_nat_masquerade_ipv6_register_notifier);
void nf_nat_masquerade_ipv6_unregister_notifier(void) { + mutex_lock(&masq_mutex); /* check if the notifier still has clients */ - if (atomic_dec_return(&masquerade_notifier_refcount) > 0) - return; + if (--masq_refcnt > 0) + goto out_unlock;
unregister_inet6addr_notifier(&masq_inet6_notifier); unregister_netdevice_notifier(&masq_dev_notifier); +out_unlock: + mutex_unlock(&masq_mutex); } EXPORT_SYMBOL_GPL(nf_nat_masquerade_ipv6_unregister_notifier);
From: Taehee Yoo ap420073@gmail.com
[ Upstream commit 53ca0f2fec39c80ccd19e6e3f30cc8daef174b70 ]
All lists that reach the tree_nodes_free() function have both zero counter and true dead flag. The reason for this is that lists to be release are selected by nf_conncount_gc_list() which already decrements the list counter and sets on the dead flag. Therefore, this if statement in tree_nodes_free() is unnecessary and wrong.
Fixes: 31568ec09ea0 ("netfilter: nf_conncount: fix list_del corruption in conn_free") Signed-off-by: Taehee Yoo ap420073@gmail.com Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/nf_conncount.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-)
diff --git a/net/netfilter/nf_conncount.c b/net/netfilter/nf_conncount.c index 8acae4a3e4c0..b6d0f6deea86 100644 --- a/net/netfilter/nf_conncount.c +++ b/net/netfilter/nf_conncount.c @@ -323,11 +323,8 @@ static void tree_nodes_free(struct rb_root *root, while (gc_count) { rbconn = gc_nodes[--gc_count]; spin_lock(&rbconn->list.list_lock); - if (rbconn->list.count == 0 && rbconn->list.dead == false) { - rbconn->list.dead = true; - rb_erase(&rbconn->node, root); - call_rcu(&rbconn->rcu_head, __tree_nodes_free); - } + rb_erase(&rbconn->node, root); + call_rcu(&rbconn->rcu_head, __tree_nodes_free); spin_unlock(&rbconn->list.list_lock); } }
From: Liran Alon liran.alon@oracle.com
[ Upstream commit f48b4711dd6e1cf282f9dfd159c14a305909c97c ]
When guest transitions from/to long-mode by modifying MSR_EFER.LMA, the list of shared MSRs to be saved/restored on guest<->host transitions is updated (See vmx_set_efer() call to setup_msrs()).
On every entry to guest, vcpu_enter_guest() calls vmx_prepare_switch_to_guest(). This function should also take care of setting the shared MSRs to be saved/restored. However, the function does nothing in case we are already running with loaded guest state (vmx->loaded_cpu_state != NULL).
This means that even when guest modifies MSR_EFER.LMA which results in updating the list of shared MSRs, it isn't being taken into account by vmx_prepare_switch_to_guest() because it happens while we are running with loaded guest state.
To fix above mentioned issue, add a flag to mark that the list of shared MSRs has been updated and modify vmx_prepare_switch_to_guest() to set shared MSRs when running with host state *OR* list of shared MSRs has been updated.
Note that this issue was mistakenly introduced by commit 678e315e78a7 ("KVM: vmx: add dedicated utility to access guest's kernel_gs_base") because previously vmx_set_efer() always called vmx_load_host_state() which resulted in vmx_prepare_switch_to_guest() to set shared MSRs.
Fixes: 678e315e78a7 ("KVM: vmx: add dedicated utility to access guest's kernel_gs_base") Reported-by: Eyal Moscovici eyal.moscovici@oracle.com Reviewed-by: Mihai Carabas mihai.carabas@oracle.com Reviewed-by: Liam Merwick liam.merwick@oracle.com Reviewed-by: Jim Mattson jmattson@google.com Signed-off-by: Liran Alon liran.alon@oracle.com Signed-off-by: Paolo Bonzini pbonzini@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/kvm/vmx.c | 21 ++++++++++++++++----- 1 file changed, 16 insertions(+), 5 deletions(-)
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 9f3def7baa6d..bdd46628c107 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -961,6 +961,7 @@ struct vcpu_vmx { struct shared_msr_entry *guest_msrs; int nmsrs; int save_nmsrs; + bool guest_msrs_dirty; unsigned long host_idt_base; #ifdef CONFIG_X86_64 u64 msr_host_kernel_gs_base; @@ -2873,6 +2874,20 @@ static void vmx_prepare_switch_to_guest(struct kvm_vcpu *vcpu)
vmx->req_immediate_exit = false;
+ /* + * Note that guest MSRs to be saved/restored can also be changed + * when guest state is loaded. This happens when guest transitions + * to/from long-mode by setting MSR_EFER.LMA. + */ + if (!vmx->loaded_cpu_state || vmx->guest_msrs_dirty) { + vmx->guest_msrs_dirty = false; + for (i = 0; i < vmx->save_nmsrs; ++i) + kvm_set_shared_msr(vmx->guest_msrs[i].index, + vmx->guest_msrs[i].data, + vmx->guest_msrs[i].mask); + + } + if (vmx->loaded_cpu_state) return;
@@ -2933,11 +2948,6 @@ static void vmx_prepare_switch_to_guest(struct kvm_vcpu *vcpu) vmcs_writel(HOST_GS_BASE, gs_base); host_state->gs_base = gs_base; } - - for (i = 0; i < vmx->save_nmsrs; ++i) - kvm_set_shared_msr(vmx->guest_msrs[i].index, - vmx->guest_msrs[i].data, - vmx->guest_msrs[i].mask); }
static void vmx_prepare_switch_to_host(struct vcpu_vmx *vmx) @@ -3417,6 +3427,7 @@ static void setup_msrs(struct vcpu_vmx *vmx) move_msr_up(vmx, index, save_nmsrs++);
vmx->save_nmsrs = save_nmsrs; + vmx->guest_msrs_dirty = true;
if (cpu_has_vmx_msr_bitmap()) vmx_update_msr_bitmap(&vmx->vcpu);
From: Yi Wang wang.yi59@zte.com.cn
[ Upstream commit 354cb410d87314e2eda344feea84809e4261570a ]
We get the following warnings about empty statements when building with 'W=1':
arch/x86/kvm/lapic.c:632:53: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] arch/x86/kvm/lapic.c:1907:42: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] arch/x86/kvm/lapic.c:1936:65: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] arch/x86/kvm/lapic.c:1975:44: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body]
Rework the debug helper macro to get rid of these warnings.
Signed-off-by: Yi Wang wang.yi59@zte.com.cn Signed-off-by: Paolo Bonzini pbonzini@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/kvm/lapic.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c index fbb0e6df121b..fac4e3d53f17 100644 --- a/arch/x86/kvm/lapic.c +++ b/arch/x86/kvm/lapic.c @@ -55,7 +55,7 @@ #define PRIo64 "o"
/* #define apic_debug(fmt,arg...) printk(KERN_WARNING fmt,##arg) */ -#define apic_debug(fmt, arg...) +#define apic_debug(fmt, arg...) do {} while (0)
/* 14 is the version for Xeon and Pentium 8.4.8*/ #define APIC_VERSION (0x14UL | ((KVM_APIC_LVT_NUM - 1) << 16))
From: Yi Wang wang.yi59@zte.com.cn
[ Upstream commit 1e4329ee2c52692ea42cc677fb2133519718b34a ]
The inline keyword which is not at the beginning of the function declaration may trigger the following build warnings, so let's fix it:
arch/x86/kvm/vmx.c:1309:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration] arch/x86/kvm/vmx.c:5947:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration] arch/x86/kvm/vmx.c:5985:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration] arch/x86/kvm/vmx.c:6023:1: warning: ‘inline’ is not at beginning of declaration [-Wold-style-declaration]
Signed-off-by: Yi Wang wang.yi59@zte.com.cn Signed-off-by: Paolo Bonzini pbonzini@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/kvm/vmx.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index bdd46628c107..0ee696f63229 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -1284,7 +1284,7 @@ static void vmx_set_nmi_mask(struct kvm_vcpu *vcpu, bool masked); static bool nested_vmx_is_page_fault_vmexit(struct vmcs12 *vmcs12, u16 error_code); static void vmx_update_msr_bitmap(struct kvm_vcpu *vcpu); -static void __always_inline vmx_disable_intercept_for_msr(unsigned long *msr_bitmap, +static __always_inline void vmx_disable_intercept_for_msr(unsigned long *msr_bitmap, u32 msr, int type);
static DEFINE_PER_CPU(struct vmcs *, vmxarea); @@ -5937,7 +5937,7 @@ static void free_vpid(int vpid) spin_unlock(&vmx_vpid_lock); }
-static void __always_inline vmx_disable_intercept_for_msr(unsigned long *msr_bitmap, +static __always_inline void vmx_disable_intercept_for_msr(unsigned long *msr_bitmap, u32 msr, int type) { int f = sizeof(unsigned long); @@ -5975,7 +5975,7 @@ static void __always_inline vmx_disable_intercept_for_msr(unsigned long *msr_bit } }
-static void __always_inline vmx_enable_intercept_for_msr(unsigned long *msr_bitmap, +static __always_inline void vmx_enable_intercept_for_msr(unsigned long *msr_bitmap, u32 msr, int type) { int f = sizeof(unsigned long); @@ -6013,7 +6013,7 @@ static void __always_inline vmx_enable_intercept_for_msr(unsigned long *msr_bitm } }
-static void __always_inline vmx_set_intercept_for_msr(unsigned long *msr_bitmap, +static __always_inline void vmx_set_intercept_for_msr(unsigned long *msr_bitmap, u32 msr, int type, bool value) { if (value)
From: Bernd Eckstein 3erndeckstein@gmail.com
[ Upstream commit 45611c61dd503454b2edae00aabe1e429ec49ebe ]
The bug is not easily reproducable, as it may occur very infrequently (we had machines with 20minutes heavy downloading before it occurred) However, on a virual machine (VMWare on Windows 10 host) it occurred pretty frequently (1-2 seconds after a speedtest was started)
dev->tx_skb mab be freed via dev_kfree_skb_irq on a callback before it is set.
This causes the following problems: - double free of the skb or potential memory leak - in dmesg: 'recvmsg bug' and 'recvmsg bug 2' and eventually general protection fault
Example dmesg output: [ 134.841986] ------------[ cut here ]------------ [ 134.841987] recvmsg bug: copied 9C24A555 seq 9C24B557 rcvnxt 9C25A6B3 fl 0 [ 134.841993] WARNING: CPU: 7 PID: 2629 at /build/linux-hwe-On9fm7/linux-hwe-4.15.0/net/ipv4/tcp.c:1865 tcp_recvmsg+0x44d/0xab0 [ 134.841994] Modules linked in: ipheth(OE) kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel aes_x86_64 crypto_simd glue_helper cryptd vmw_balloon intel_rapl_perf joydev input_leds serio_raw vmw_vsock_vmci_transport vsock shpchp i2c_piix4 mac_hid binfmt_misc vmw_vmci parport_pc ppdev lp parport autofs4 vmw_pvscsi vmxnet3 hid_generic usbhid hid vmwgfx ttm drm_kms_helper syscopyarea sysfillrect mptspi mptscsih sysimgblt ahci psmouse fb_sys_fops pata_acpi mptbase libahci e1000 drm scsi_transport_spi [ 134.842046] CPU: 7 PID: 2629 Comm: python Tainted: G W OE 4.15.0-34-generic #37~16.04.1-Ubuntu [ 134.842046] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/19/2017 [ 134.842048] RIP: 0010:tcp_recvmsg+0x44d/0xab0 [ 134.842048] RSP: 0018:ffffa6630422bcc8 EFLAGS: 00010286 [ 134.842049] RAX: 0000000000000000 RBX: ffff997616f4f200 RCX: 0000000000000006 [ 134.842049] RDX: 0000000000000007 RSI: 0000000000000082 RDI: ffff9976257d6490 [ 134.842050] RBP: ffffa6630422bd98 R08: 0000000000000001 R09: 000000000004bba4 [ 134.842050] R10: 0000000001e00c6f R11: 000000000004bba4 R12: ffff99760dee3000 [ 134.842051] R13: 0000000000000000 R14: ffff99760dee3514 R15: 0000000000000000 [ 134.842051] FS: 00007fe332347700(0000) GS:ffff9976257c0000(0000) knlGS:0000000000000000 [ 134.842052] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 134.842053] CR2: 0000000001e41000 CR3: 000000020e9b4006 CR4: 00000000003606e0 [ 134.842055] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 134.842055] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 134.842057] Call Trace: [ 134.842060] ? aa_sk_perm+0x53/0x1a0 [ 134.842064] inet_recvmsg+0x51/0xc0 [ 134.842066] sock_recvmsg+0x43/0x50 [ 134.842070] SYSC_recvfrom+0xe4/0x160 [ 134.842072] ? __schedule+0x3de/0x8b0 [ 134.842075] ? ktime_get_ts64+0x4c/0xf0 [ 134.842079] SyS_recvfrom+0xe/0x10 [ 134.842082] do_syscall_64+0x73/0x130 [ 134.842086] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 [ 134.842086] RIP: 0033:0x7fe331f5a81d [ 134.842088] RSP: 002b:00007ffe8da98398 EFLAGS: 00000246 ORIG_RAX: 000000000000002d [ 134.842090] RAX: ffffffffffffffda RBX: ffffffffffffffff RCX: 00007fe331f5a81d [ 134.842094] RDX: 00000000000003fb RSI: 0000000001e00874 RDI: 0000000000000003 [ 134.842095] RBP: 00007fe32f642c70 R08: 0000000000000000 R09: 0000000000000000 [ 134.842097] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe332347698 [ 134.842099] R13: 0000000001b7e0a0 R14: 0000000001e00874 R15: 0000000000000000 [ 134.842103] Code: 24 fd ff ff e9 cc fe ff ff 48 89 d8 41 8b 8c 24 10 05 00 00 44 8b 45 80 48 c7 c7 08 bd 59 8b 48 89 85 68 ff ff ff e8 b3 c4 7d ff <0f> 0b 48 8b 85 68 ff ff ff e9 e9 fe ff ff 41 8b 8c 24 10 05 00 [ 134.842126] ---[ end trace b7138fc08c83147f ]--- [ 134.842144] general protection fault: 0000 [#1] SMP PTI [ 134.842145] Modules linked in: ipheth(OE) kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel aes_x86_64 crypto_simd glue_helper cryptd vmw_balloon intel_rapl_perf joydev input_leds serio_raw vmw_vsock_vmci_transport vsock shpchp i2c_piix4 mac_hid binfmt_misc vmw_vmci parport_pc ppdev lp parport autofs4 vmw_pvscsi vmxnet3 hid_generic usbhid hid vmwgfx ttm drm_kms_helper syscopyarea sysfillrect mptspi mptscsih sysimgblt ahci psmouse fb_sys_fops pata_acpi mptbase libahci e1000 drm scsi_transport_spi [ 134.842161] CPU: 7 PID: 2629 Comm: python Tainted: G W OE 4.15.0-34-generic #37~16.04.1-Ubuntu [ 134.842162] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 05/19/2017 [ 134.842164] RIP: 0010:tcp_close+0x2c6/0x440 [ 134.842165] RSP: 0018:ffffa6630422bde8 EFLAGS: 00010202 [ 134.842167] RAX: 0000000000000000 RBX: ffff99760dee3000 RCX: 0000000180400034 [ 134.842168] RDX: 5c4afd407207a6c4 RSI: ffffe868495bd300 RDI: ffff997616f4f200 [ 134.842169] RBP: ffffa6630422be08 R08: 0000000016f4d401 R09: 0000000180400034 [ 134.842169] R10: ffffa6630422bd98 R11: 0000000000000000 R12: 000000000000600c [ 134.842170] R13: 0000000000000000 R14: ffff99760dee30c8 R15: ffff9975bd44fe00 [ 134.842171] FS: 00007fe332347700(0000) GS:ffff9976257c0000(0000) knlGS:0000000000000000 [ 134.842173] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 134.842174] CR2: 0000000001e41000 CR3: 000000020e9b4006 CR4: 00000000003606e0 [ 134.842177] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 134.842178] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 134.842179] Call Trace: [ 134.842181] inet_release+0x42/0x70 [ 134.842183] __sock_release+0x42/0xb0 [ 134.842184] sock_close+0x15/0x20 [ 134.842187] __fput+0xea/0x220 [ 134.842189] ____fput+0xe/0x10 [ 134.842191] task_work_run+0x8a/0xb0 [ 134.842193] exit_to_usermode_loop+0xc4/0xd0 [ 134.842195] do_syscall_64+0xf4/0x130 [ 134.842197] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 [ 134.842197] RIP: 0033:0x7fe331f5a560 [ 134.842198] RSP: 002b:00007ffe8da982e8 EFLAGS: 00000246 ORIG_RAX: 0000000000000003 [ 134.842200] RAX: 0000000000000000 RBX: 00007fe32f642c70 RCX: 00007fe331f5a560 [ 134.842201] RDX: 00000000008f5320 RSI: 0000000001cd4b50 RDI: 0000000000000003 [ 134.842202] RBP: 00007fe32f6500f8 R08: 000000000000003c R09: 00000000009343c0 [ 134.842203] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe32f6500d0 [ 134.842204] R13: 00000000008f5320 R14: 00000000008f5320 R15: 0000000001cd4770 [ 134.842205] Code: c8 00 00 00 45 31 e4 49 39 fe 75 4d eb 50 83 ab d8 00 00 00 01 48 8b 17 48 8b 47 08 48 c7 07 00 00 00 00 48 c7 47 08 00 00 00 00 <48> 89 42 08 48 89 10 0f b6 57 34 8b 47 2c 2b 47 28 83 e2 01 80 [ 134.842226] RIP: tcp_close+0x2c6/0x440 RSP: ffffa6630422bde8 [ 134.842227] ---[ end trace b7138fc08c831480 ]---
The proposed patch eliminates a potential racing condition. Before, usb_submit_urb was called and _after_ that, the skb was attached (dev->tx_skb). So, on a callback it was possible, however unlikely that the skb was freed before it was set. That way (because dev->tx_skb was not set to NULL after it was freed), it could happen that a skb from a earlier transmission was freed a second time (and the skb we should have freed did not get freed at all)
Now we free the skb directly in ipheth_tx(). It is not passed to the callback anymore, eliminating the posibility of a double free of the same skb. Depending on the retval of usb_submit_urb() we use dev_kfree_skb_any() respectively dev_consume_skb_any() to free the skb.
Signed-off-by: Oliver Zweigle Oliver.Zweigle@faro.com Signed-off-by: Bernd Eckstein 3ernd.Eckstein@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/usb/ipheth.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-)
diff --git a/drivers/net/usb/ipheth.c b/drivers/net/usb/ipheth.c index 7275761a1177..3d8a70d3ea9b 100644 --- a/drivers/net/usb/ipheth.c +++ b/drivers/net/usb/ipheth.c @@ -140,7 +140,6 @@ struct ipheth_device { struct usb_device *udev; struct usb_interface *intf; struct net_device *net; - struct sk_buff *tx_skb; struct urb *tx_urb; struct urb *rx_urb; unsigned char *tx_buf; @@ -230,6 +229,7 @@ static void ipheth_rcvbulk_callback(struct urb *urb) case -ENOENT: case -ECONNRESET: case -ESHUTDOWN: + case -EPROTO: return; case 0: break; @@ -281,7 +281,6 @@ static void ipheth_sndbulk_callback(struct urb *urb) dev_err(&dev->intf->dev, "%s: urb status: %d\n", __func__, status);
- dev_kfree_skb_irq(dev->tx_skb); if (status == 0) netif_wake_queue(dev->net); else @@ -423,7 +422,7 @@ static int ipheth_tx(struct sk_buff *skb, struct net_device *net) if (skb->len > IPHETH_BUF_SIZE) { WARN(1, "%s: skb too large: %d bytes\n", __func__, skb->len); dev->net->stats.tx_dropped++; - dev_kfree_skb_irq(skb); + dev_kfree_skb_any(skb); return NETDEV_TX_OK; }
@@ -443,12 +442,11 @@ static int ipheth_tx(struct sk_buff *skb, struct net_device *net) dev_err(&dev->intf->dev, "%s: usb_submit_urb: %d\n", __func__, retval); dev->net->stats.tx_errors++; - dev_kfree_skb_irq(skb); + dev_kfree_skb_any(skb); } else { - dev->tx_skb = skb; - dev->net->stats.tx_packets++; dev->net->stats.tx_bytes += skb->len; + dev_consume_skb_any(skb); netif_stop_queue(net); }
From: Heiner Kallweit hkallweit1@gmail.com
[ Upstream commit c85ddecae6e5e82ca3ae6f20c63f1d865e2ff5ea ]
After switching the r8169 driver to use phylib some user reported that their network is broken. This was caused by the genphy PHY driver being used instead of the dedicated PHY driver for the RTL8211B. Users reported that loading the Realtek PHY driver module upfront fixes the issue. See also this mail thread: https://marc.info/?t=154279781800003&r=1&w=2 The issue is quite weird and the root cause seems to be somewhere in the base driver core. The patch works around the issue and may be removed once the actual issue is fixed.
The Fixes tag refers to the first reported occurrence of the issue. The issue itself may have been existing much longer and it may affect users of other network chips as well. Users typically will recognize this issue only if their PHY stops working when being used with the genphy driver.
Fixes: f1e911d5d0df ("r8169: add basic phylib support") Signed-off-by: Heiner Kallweit hkallweit1@gmail.com Reviewed-by: Andrew Lunn andrew@lunn.ch Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/phy/phy_device.c | 8 ++++++++ 1 file changed, 8 insertions(+)
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index 19ab8a7d1e48..733e35b7c4bb 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -1930,6 +1930,14 @@ int phy_driver_register(struct phy_driver *new_driver, struct module *owner) new_driver->mdiodrv.driver.remove = phy_remove; new_driver->mdiodrv.driver.owner = owner;
+ /* The following works around an issue where the PHY driver doesn't bind + * to the device, resulting in the genphy driver being used instead of + * the dedicated driver. The root cause of the issue isn't known yet + * and seems to be in the base driver core. Once this is fixed we may + * remove this workaround. + */ + new_driver->mdiodrv.driver.probe_type = PROBE_FORCE_SYNCHRONOUS; + retval = driver_register(&new_driver->mdiodrv.driver); if (retval) { pr_err("%s: Error %d in registering driver\n",
From: Lorenzo Bianconi lorenzo.bianconi@redhat.com
[ Upstream commit 24a6d2dd263bc910de018c78d1148b3e33b94512 ]
Fix a possible NULL pointer dereference in nic_remove routine removing the nicpf module if nic_probe fails. The issue can be triggered with the following reproducer:
$rmmod nicvf $rmmod nicpf
[ 521.412008] Unable to handle kernel access to user memory outside uaccess routines at virtual address 0000000000000014 [ 521.422777] Mem abort info: [ 521.425561] ESR = 0x96000004 [ 521.428624] Exception class = DABT (current EL), IL = 32 bits [ 521.434535] SET = 0, FnV = 0 [ 521.437579] EA = 0, S1PTW = 0 [ 521.440730] Data abort info: [ 521.443603] ISV = 0, ISS = 0x00000004 [ 521.447431] CM = 0, WnR = 0 [ 521.450417] user pgtable: 4k pages, 48-bit VAs, pgdp = 0000000072a3da42 [ 521.457022] [0000000000000014] pgd=0000000000000000 [ 521.461916] Internal error: Oops: 96000004 [#1] SMP [ 521.511801] Hardware name: GIGABYTE H270-T70/MT70-HD0, BIOS T49 02/02/2018 [ 521.518664] pstate: 80400005 (Nzcv daif +PAN -UAO) [ 521.523451] pc : nic_remove+0x24/0x88 [nicpf] [ 521.527808] lr : pci_device_remove+0x48/0xd8 [ 521.532066] sp : ffff000013433cc0 [ 521.535370] x29: ffff000013433cc0 x28: ffff810f6ac50000 [ 521.540672] x27: 0000000000000000 x26: 0000000000000000 [ 521.545974] x25: 0000000056000000 x24: 0000000000000015 [ 521.551274] x23: ffff8007ff89a110 x22: ffff000001667070 [ 521.556576] x21: ffff8007ffb170b0 x20: ffff8007ffb17000 [ 521.561877] x19: 0000000000000000 x18: 0000000000000025 [ 521.567178] x17: 0000000000000000 x16: 000000000000010ffc33ff98 x8 : 0000000000000000 [ 521.593683] x7 : 0000000000000000 x6 : 0000000000000001 [ 521.598983] x5 : 0000000000000002 x4 : 0000000000000003 [ 521.604284] x3 : ffff8007ffb17184 x2 : ffff8007ffb17184 [ 521.609585] x1 : ffff000001662118 x0 : ffff000008557be0 [ 521.614887] Process rmmod (pid: 1897, stack limit = 0x00000000859535c3) [ 521.621490] Call trace: [ 521.623928] nic_remove+0x24/0x88 [nicpf] [ 521.627927] pci_device_remove+0x48/0xd8 [ 521.631847] device_release_driver_internal+0x1b0/0x248 [ 521.637062] driver_detach+0x50/0xc0 [ 521.640628] bus_remove_driver+0x60/0x100 [ 521.644627] driver_unregister+0x34/0x60 [ 521.648538] pci_unregister_driver+0x24/0xd8 [ 521.652798] nic_cleanup_module+0x14/0x111c [nicpf] [ 521.657672] __arm64_sys_delete_module+0x150/0x218 [ 521.662460] el0_svc_handler+0x94/0x110 [ 521.666287] el0_svc+0x8/0xc [ 521.669160] Code: aa1e03e0 9102c295 d503201f f9404eb3 (b9401660)
Fixes: 4863dea3fab0 ("net: Adding support for Cavium ThunderX network controller") Signed-off-by: Lorenzo Bianconi lorenzo.bianconi@redhat.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/cavium/thunder/nic_main.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/net/ethernet/cavium/thunder/nic_main.c b/drivers/net/ethernet/cavium/thunder/nic_main.c index 55af04fa03a7..6c8dcb65ff03 100644 --- a/drivers/net/ethernet/cavium/thunder/nic_main.c +++ b/drivers/net/ethernet/cavium/thunder/nic_main.c @@ -1441,6 +1441,9 @@ static void nic_remove(struct pci_dev *pdev) { struct nicpf *nic = pci_get_drvdata(pdev);
+ if (!nic) + return; + if (nic->flags & NIC_SRIOV_ENABLED) pci_disable_sriov(pdev);
From: Bryan Whitehead Bryan.Whitehead@microchip.com
[ Upstream commit cc5922054131f9abefdc0622ae64fc55e6b2671d ]
The lan743x driver, when under heavy traffic load, has been noticed to sometimes hang, or cause a kernel panic.
Debugging reveals that the TX napi poll routine was returning the wrong value, 'weight'. Most other drivers return 0. And call napi_complete, instead of napi_complete_done.
Additionally when creating the tx napi poll routine. Changed netif_napi_add, to netif_tx_napi_add.
Updates for v3: changed 'fixes' tag to match defined format
Updates for v2: use napi_complete, instead of napi_complete_done in lan743x_tx_napi_poll use netif_tx_napi_add, instead of netif_napi_add for registration of tx napi poll routine
fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Bryan Whitehead Bryan.Whitehead@microchip.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/microchip/lan743x_main.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/drivers/net/ethernet/microchip/lan743x_main.c b/drivers/net/ethernet/microchip/lan743x_main.c index 001b5f714c1b..5c3ac70abeca 100644 --- a/drivers/net/ethernet/microchip/lan743x_main.c +++ b/drivers/net/ethernet/microchip/lan743x_main.c @@ -1675,7 +1675,7 @@ static int lan743x_tx_napi_poll(struct napi_struct *napi, int weight) netif_wake_queue(adapter->netdev); }
- if (!napi_complete_done(napi, weight)) + if (!napi_complete(napi)) goto done;
/* enable isr */ @@ -1684,7 +1684,7 @@ static int lan743x_tx_napi_poll(struct napi_struct *napi, int weight) lan743x_csr_read(adapter, INT_STS);
done: - return weight; + return 0; }
static void lan743x_tx_ring_cleanup(struct lan743x_tx *tx) @@ -1873,9 +1873,9 @@ static int lan743x_tx_open(struct lan743x_tx *tx) tx->vector_flags = lan743x_intr_get_vector_flags(adapter, INT_BIT_DMA_TX_ (tx->channel_number)); - netif_napi_add(adapter->netdev, - &tx->napi, lan743x_tx_napi_poll, - tx->ring_size - 1); + netif_tx_napi_add(adapter->netdev, + &tx->napi, lan743x_tx_napi_poll, + tx->ring_size - 1); napi_enable(&tx->napi);
data = 0;
From: Bryan Whitehead Bryan.Whitehead@microchip.com
[ Upstream commit 4df5ce9bc03e47d05f400e64aa32a82ec4cef419 ]
This driver was designed to work with both LAN7430 and LAN7431. The only difference between the two is the LAN7431 has support for external phy.
This change adds LAN7431 to the list of recognized devices supported by this driver.
Updates for v2: changed 'fixes' tag to match defined format
fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver") Signed-off-by: Bryan Whitehead Bryan.Whitehead@microchip.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/microchip/lan743x_main.c | 1 + drivers/net/ethernet/microchip/lan743x_main.h | 1 + 2 files changed, 2 insertions(+)
diff --git a/drivers/net/ethernet/microchip/lan743x_main.c b/drivers/net/ethernet/microchip/lan743x_main.c index 5c3ac70abeca..aaedf1072460 100644 --- a/drivers/net/ethernet/microchip/lan743x_main.c +++ b/drivers/net/ethernet/microchip/lan743x_main.c @@ -3020,6 +3020,7 @@ static const struct dev_pm_ops lan743x_pm_ops = {
static const struct pci_device_id lan743x_pcidev_tbl[] = { { PCI_DEVICE(PCI_VENDOR_ID_SMSC, PCI_DEVICE_ID_SMSC_LAN7430) }, + { PCI_DEVICE(PCI_VENDOR_ID_SMSC, PCI_DEVICE_ID_SMSC_LAN7431) }, { 0, } };
diff --git a/drivers/net/ethernet/microchip/lan743x_main.h b/drivers/net/ethernet/microchip/lan743x_main.h index 0e82b6368798..2d6eea18973e 100644 --- a/drivers/net/ethernet/microchip/lan743x_main.h +++ b/drivers/net/ethernet/microchip/lan743x_main.h @@ -548,6 +548,7 @@ struct lan743x_adapter; /* SMSC acquired EFAR late 1990's, MCHP acquired SMSC 2012 */ #define PCI_VENDOR_ID_SMSC PCI_VENDOR_ID_EFAR #define PCI_DEVICE_ID_SMSC_LAN7430 (0x7430) +#define PCI_DEVICE_ID_SMSC_LAN7431 (0x7431)
#define PCI_CONFIG_LENGTH (0x1000)
From: Marek Szyprowski m.szyprowski@samsung.com
[ Upstream commit c9287fa657b3328b4549c0ab39ea7f197a3d6a50 ]
list_for_each_entry_safe() is not safe for deleting entries from the list if the spin lock, which protects it, is released and reacquired during the list iteration. Fix this issue by replacing this construction with a simple check if list is empty and removing the first entry in each iteration. This is almost equivalent to a revert of the commit mentioned in the Fixes: tag.
This patch fixes following issue: --->8--- Unable to handle kernel NULL pointer dereference at virtual address 00000104 pgd = (ptrval) [00000104] *pgd=00000000 Internal error: Oops: 817 [#1] PREEMPT SMP ARM Modules linked in: CPU: 1 PID: 84 Comm: kworker/1:1 Not tainted 4.20.0-rc2-next-20181114-00009-g8266b35ec404 #1061 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) Workqueue: events eth_work PC is at rx_fill+0x60/0xac LR is at _raw_spin_lock_irqsave+0x50/0x5c pc : [<c065fee0>] lr : [<c0a056b8>] psr: 80000093 sp : ee7fbee8 ip : 00000100 fp : 00000000 r10: 006000c0 r9 : c10b0ab0 r8 : ee7eb5c0 r7 : ee7eb614 r6 : ee7eb5ec r5 : 000000dc r4 : ee12ac00 r3 : ee12ac24 r2 : 00000200 r1 : 60000013 r0 : ee7eb5ec Flags: Nzcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none Control: 10c5387d Table: 6d5dc04a DAC: 00000051 Process kworker/1:1 (pid: 84, stack limit = 0x(ptrval)) Stack: (0xee7fbee8 to 0xee7fc000) ... [<c065fee0>] (rx_fill) from [<c0143b7c>] (process_one_work+0x200/0x738) [<c0143b7c>] (process_one_work) from [<c0144118>] (worker_thread+0x2c/0x4c8) [<c0144118>] (worker_thread) from [<c014a8a4>] (kthread+0x128/0x164) [<c014a8a4>] (kthread) from [<c01010b4>] (ret_from_fork+0x14/0x20) Exception stack(0xee7fbfb0 to 0xee7fbff8) ... ---[ end trace 64480bc835eba7d6 ]---
Fixes: fea14e68ff5e ("usb: gadget: u_ether: use better list accessors") Signed-off-by: Marek Szyprowski m.szyprowski@samsung.com Signed-off-by: Felipe Balbi felipe.balbi@linux.intel.com
Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/gadget/function/u_ether.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/gadget/function/u_ether.c b/drivers/usb/gadget/function/u_ether.c index 1000d864929c..0f026d445e31 100644 --- a/drivers/usb/gadget/function/u_ether.c +++ b/drivers/usb/gadget/function/u_ether.c @@ -401,12 +401,12 @@ static int alloc_requests(struct eth_dev *dev, struct gether *link, unsigned n) static void rx_fill(struct eth_dev *dev, gfp_t gfp_flags) { struct usb_request *req; - struct usb_request *tmp; unsigned long flags;
/* fill unused rxq slots with some skb */ spin_lock_irqsave(&dev->req_lock, flags); - list_for_each_entry_safe(req, tmp, &dev->rx_reqs, list) { + while (!list_empty(&dev->rx_reqs)) { + req = list_first_entry(&dev->rx_reqs, struct usb_request, list); list_del_init(&req->list); spin_unlock_irqrestore(&dev->req_lock, flags);
@@ -1125,7 +1125,6 @@ void gether_disconnect(struct gether *link) { struct eth_dev *dev = link->ioport; struct usb_request *req; - struct usb_request *tmp;
WARN_ON(!dev); if (!dev) @@ -1142,7 +1141,8 @@ void gether_disconnect(struct gether *link) */ usb_ep_disable(link->in_ep); spin_lock(&dev->req_lock); - list_for_each_entry_safe(req, tmp, &dev->tx_reqs, list) { + while (!list_empty(&dev->tx_reqs)) { + req = list_first_entry(&dev->tx_reqs, struct usb_request, list); list_del(&req->list);
spin_unlock(&dev->req_lock); @@ -1154,7 +1154,8 @@ void gether_disconnect(struct gether *link)
usb_ep_disable(link->out_ep); spin_lock(&dev->req_lock); - list_for_each_entry_safe(req, tmp, &dev->rx_reqs, list) { + while (!list_empty(&dev->rx_reqs)) { + req = list_first_entry(&dev->rx_reqs, struct usb_request, list); list_del(&req->list);
spin_unlock(&dev->req_lock);
From: Taehee Yoo ap420073@gmail.com
[ Upstream commit ca08987885a147643817d02bf260bc4756ce8cd4 ]
There is no expression deactivation call from the rule replacement path, hence, chain counter is not decremented. A few steps to reproduce the problem:
%nft add table ip filter %nft add chain ip filter c1 %nft add chain ip filter c1 %nft add rule ip filter c1 jump c2 %nft replace rule ip filter c1 handle 3 accept %nft flush ruleset
<jump c2> expression means immediate NFT_JUMP to chain c2. Reference count of chain c2 is increased when the rule is added.
When rule is deleted or replaced, the reference counter of c2 should be decreased via nft_rule_expr_deactivate() which calls nft_immediate_deactivate().
Splat looks like: [ 214.396453] WARNING: CPU: 1 PID: 21 at net/netfilter/nf_tables_api.c:1432 nf_tables_chain_destroy.isra.38+0x2f9/0x3a0 [nf_tables] [ 214.398983] Modules linked in: nf_tables nfnetlink [ 214.398983] CPU: 1 PID: 21 Comm: kworker/1:1 Not tainted 4.20.0-rc2+ #44 [ 214.398983] Workqueue: events nf_tables_trans_destroy_work [nf_tables] [ 214.398983] RIP: 0010:nf_tables_chain_destroy.isra.38+0x2f9/0x3a0 [nf_tables] [ 214.398983] Code: 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 8e 00 00 00 48 8b 7b 58 e8 e1 2c 4e c6 48 89 df e8 d9 2c 4e c6 eb 9a <0f> 0b eb 96 0f 0b e9 7e fe ff ff e8 a7 7e 4e c6 e9 a4 fe ff ff e8 [ 214.398983] RSP: 0018:ffff8881152874e8 EFLAGS: 00010202 [ 214.398983] RAX: 0000000000000001 RBX: ffff88810ef9fc28 RCX: ffff8881152876f0 [ 214.398983] RDX: dffffc0000000000 RSI: 1ffff11022a50ede RDI: ffff88810ef9fc78 [ 214.398983] RBP: 1ffff11022a50e9d R08: 0000000080000000 R09: 0000000000000000 [ 214.398983] R10: 0000000000000000 R11: 0000000000000000 R12: 1ffff11022a50eba [ 214.398983] R13: ffff888114446e08 R14: ffff8881152876f0 R15: ffffed1022a50ed6 [ 214.398983] FS: 0000000000000000(0000) GS:ffff888116400000(0000) knlGS:0000000000000000 [ 214.398983] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 214.398983] CR2: 00007fab9bb5f868 CR3: 000000012aa16000 CR4: 00000000001006e0 [ 214.398983] Call Trace: [ 214.398983] ? nf_tables_table_destroy.isra.37+0x100/0x100 [nf_tables] [ 214.398983] ? __kasan_slab_free+0x145/0x180 [ 214.398983] ? nf_tables_trans_destroy_work+0x439/0x830 [nf_tables] [ 214.398983] ? kfree+0xdb/0x280 [ 214.398983] nf_tables_trans_destroy_work+0x5f5/0x830 [nf_tables] [ ... ]
Fixes: bb7b40aecbf7 ("netfilter: nf_tables: bogus EBUSY in chain deletions") Reported by: Christoph Anton Mitterer calestyo@scientia.net Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=914505 Link: https://bugzilla.kernel.org/show_bug.cgi?id=201791 Signed-off-by: Taehee Yoo ap420073@gmail.com Signed-off-by: Pablo Neira Ayuso pablo@netfilter.org Signed-off-by: Sasha Levin sashal@kernel.org --- net/netfilter/nf_tables_api.c | 15 ++++----------- 1 file changed, 4 insertions(+), 11 deletions(-)
diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 06ed55cef962..fe0558b15fd3 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -2646,21 +2646,14 @@ static int nf_tables_newrule(struct net *net, struct sock *nlsk, }
if (nlh->nlmsg_flags & NLM_F_REPLACE) { - if (!nft_is_active_next(net, old_rule)) { - err = -ENOENT; - goto err2; - } - trans = nft_trans_rule_add(&ctx, NFT_MSG_DELRULE, - old_rule); + trans = nft_trans_rule_add(&ctx, NFT_MSG_NEWRULE, rule); if (trans == NULL) { err = -ENOMEM; goto err2; } - nft_deactivate_next(net, old_rule); - chain->use--; - - if (nft_trans_rule_add(&ctx, NFT_MSG_NEWRULE, rule) == NULL) { - err = -ENOMEM; + err = nft_delrule(&ctx, old_rule); + if (err < 0) { + nft_trans_destroy(trans); goto err2; }
From: Hui Wang hui.wang@canonical.com
[ Upstream commit 8159a6a4a7d2a092d5375f695ecfca22b4562b5f ]
Like the Dell WD15 Dock, the WD19 Dock (0bda:402e) doens't provide useful string for the vendor and product names too. In order to share the UCM with WD15, here we keep the profile_name same as the WD15.
Signed-off-by: Hui Wang hui.wang@canonical.com Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Sasha Levin sashal@kernel.org --- sound/usb/quirks-table.h | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h index 08aa78007020..1c73b9ed44a6 100644 --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -3387,5 +3387,15 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge", "HVR-950Q"), .ifnum = QUIRK_NO_INTERFACE } }, +/* Dell WD19 Dock */ +{ + USB_DEVICE(0x0bda, 0x402e), + .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) { + .vendor_name = "Dell", + .product_name = "WD19 Dock", + .profile_name = "Dell-WD15-Dock", + .ifnum = QUIRK_NO_INTERFACE + } +},
#undef USB_DEVICE_VENDOR_SPEC
From: David Howells dhowells@redhat.com
[ Upstream commit e6bc06faf64a83384cc0abc537df954c9d3ff942 ]
If cachefiles gets an error other then ENOENT when trying to look up an object in the cache (in this case, EACCES), the object state machine will eventually transition to the DROP_OBJECT state.
This state invokes fscache_drop_object() which tries to sync the auxiliary data with the cache (this is done lazily since commit 402cb8dda949d) on an incomplete cache object struct.
The problem comes when cachefiles_update_object_xattr() is called to rewrite the xattr holding the data. There's an assertion there that the cache object points to a dentry as we're going to update its xattr. The assertion trips, however, as dentry didn't get set.
Fix the problem by skipping the update in cachefiles if the object doesn't refer to a dentry. A better way to do it could be to skip the update from the DROP_OBJECT state handler in fscache, but that might deny the cache the opportunity to update intermediate state.
If this error occurs, the kernel log includes lines that look like the following:
CacheFiles: Lookup failed error -13 CacheFiles: CacheFiles: Assertion failed ------------[ cut here ]------------ kernel BUG at fs/cachefiles/xattr.c:138! ... Workqueue: fscache_object fscache_object_work_func [fscache] RIP: 0010:cachefiles_update_object_xattr.cold.4+0x18/0x1a [cachefiles] ... Call Trace: cachefiles_update_object+0xdd/0x1c0 [cachefiles] fscache_update_aux_data+0x23/0x30 [fscache] fscache_drop_object+0x18e/0x1c0 [fscache] fscache_object_work_func+0x74/0x2b0 [fscache] process_one_work+0x18d/0x340 worker_thread+0x2e/0x390 ? pwq_unbound_release_workfn+0xd0/0xd0 kthread+0x112/0x130 ? kthread_bind+0x30/0x30 ret_from_fork+0x35/0x40
Note that there are actually two issues here: (1) EACCES happened on a cache object and (2) an oops occurred. I think that the second is a consequence of the first (it certainly looks like it ought to be). This patch only deals with the second.
Fixes: 402cb8dda949 ("fscache: Attach the index key and aux data to the cookie") Reported-by: Zhibin Li zhibli@redhat.com Signed-off-by: David Howells dhowells@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/cachefiles/xattr.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/fs/cachefiles/xattr.c b/fs/cachefiles/xattr.c index 0a29a00aed2e..511e6c68156a 100644 --- a/fs/cachefiles/xattr.c +++ b/fs/cachefiles/xattr.c @@ -135,7 +135,8 @@ int cachefiles_update_object_xattr(struct cachefiles_object *object, struct dentry *dentry = object->dentry; int ret;
- ASSERT(dentry); + if (!dentry) + return -ESTALE;
_enter("%p,#%d", object, auxdata->len);
From: "kiran.modukuri" kiran.modukuri@gmail.com
[ Upstream commit 3f2b7b9035107d6096ea438ea3d97dcf0481b6d2 ]
The code in fscache_retrieval_complete is using atomic_sub followed by an atomic_read:
atomic_sub(n_pages, &op->n_pages); if (atomic_read(&op->n_pages) <= 0) fscache_op_complete(&op->op, true);
This causes two threads doing a decrement of n_pages to race with each other seeing the op->refcount 0 at same time - and they end up calling fscache_op_complete() in both the threads leading to an assertion failure.
Fix this by using atomic_sub_return_relaxed() instead of two calls. Note that I'm using 'relaxed' rather than, say, 'release' as there aren't multiple variables that appear to need ordering across the release.
The oops looks something like:
FS-Cache: Assertion failed FS-Cache: 0 > 0 is false ... kernel BUG at /usr/src/linux-4.4.0/fs/fscache/operation.c:449! ... Workqueue: fscache_operation fscache_op_work_func [fscache] ... RIP: 0010:[<ffffffffc037eacd>] fscache_op_complete+0x10d/0x180 [fscache] ... Call Trace: [<ffffffffc1464cf9>] cachefiles_read_copier+0x3a9/0x410 [cachefiles] [<ffffffffc037e272>] fscache_op_work_func+0x22/0x50 [fscache] [<ffffffff81096da0>] process_one_work+0x150/0x3f0 [<ffffffff8109751a>] worker_thread+0x11a/0x470 [<ffffffff81808e59>] ? __schedule+0x359/0x980 [<ffffffff81097400>] ? rescuer_thread+0x310/0x310 [<ffffffff8109cdd6>] kthread+0xd6/0xf0 [<ffffffff8109cd00>] ? kthread_park+0x60/0x60 [<ffffffff8180d0cf>] ret_from_fork+0x3f/0x70 [<ffffffff8109cd00>] ? kthread_park+0x60/0x60
This seen this in 4.4.x kernels and the same bug affects fscache in latest upstreams kernels.
Fixes: 1bb4b7f98f36 ("FS-Cache: The retrieval remaining-pages counter needs to be atomic_t") Signed-off-by: Kiran Kumar Modukuri kiran.modukuri@gmail.com Signed-off-by: David Howells dhowells@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- include/linux/fscache-cache.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
diff --git a/include/linux/fscache-cache.h b/include/linux/fscache-cache.h index 34cf0fdd7dc7..610815e3f1aa 100644 --- a/include/linux/fscache-cache.h +++ b/include/linux/fscache-cache.h @@ -196,8 +196,7 @@ static inline void fscache_enqueue_retrieval(struct fscache_retrieval *op) static inline void fscache_retrieval_complete(struct fscache_retrieval *op, int n_pages) { - atomic_sub(n_pages, &op->n_pages); - if (atomic_read(&op->n_pages) <= 0) + if (atomic_sub_return_relaxed(n_pages, &op->n_pages) <= 0) fscache_op_complete(&op->op, false); }
From: Kiran Kumar Modukuri kiran.modukuri@gmail.com
[ Upstream commit 9a24ce5b66f9c8190d63b15f4473600db4935f1f ]
[Description]
In a heavily loaded system where the system pagecache is nearing memory limits and fscache is enabled, pages can be leaked by fscache while trying read pages from cachefiles backend. This can happen because two applications can be reading same page from a single mount, two threads can be trying to read the backing page at same time. This results in one of the threads finding that a page for the backing file or netfs file is already in the radix tree. During the error handling cachefiles does not clean up the reference on backing page, leading to page leak.
[Fix] The fix is straightforward, to decrement the reference when error is encountered.
[dhowells: Note that I've removed the clearance and put of newpage as they aren't attested in the commit message and don't appear to actually achieve anything since a new page is only allocated is newpage!=NULL and any residual new page is cleared before returning.]
[Testing] I have tested the fix using following method for 12+ hrs.
1) mkdir -p /mnt/nfs ; mount -o vers=3,fsc <server_ip>:/export /mnt/nfs 2) create 10000 files of 2.8MB in a NFS mount. 3) start a thread to simulate heavy VM presssure (while true ; do echo 3 > /proc/sys/vm/drop_caches ; sleep 1 ; done)& 4) start multiple parallel reader for data set at same time find /mnt/nfs -type f | xargs -P 80 cat > /dev/null & find /mnt/nfs -type f | xargs -P 80 cat > /dev/null & find /mnt/nfs -type f | xargs -P 80 cat > /dev/null & .. .. find /mnt/nfs -type f | xargs -P 80 cat > /dev/null & find /mnt/nfs -type f | xargs -P 80 cat > /dev/null & 5) finally check using cat /proc/fs/fscache/stats | grep -i pages ; free -h , cat /proc/meminfo and page-types -r -b lru to ensure all pages are freed.
Reviewed-by: Daniel Axtens dja@axtens.net Signed-off-by: Shantanu Goel sgoel01@yahoo.com Signed-off-by: Kiran Kumar Modukuri kiran.modukuri@gmail.com [dja: forward ported to current upstream] Signed-off-by: Daniel Axtens dja@axtens.net Signed-off-by: David Howells dhowells@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/cachefiles/rdwr.c | 6 ++++++ 1 file changed, 6 insertions(+)
diff --git a/fs/cachefiles/rdwr.c b/fs/cachefiles/rdwr.c index 40f7595aad10..db233588a69a 100644 --- a/fs/cachefiles/rdwr.c +++ b/fs/cachefiles/rdwr.c @@ -535,7 +535,10 @@ static int cachefiles_read_backing_file(struct cachefiles_object *object, netpage->index, cachefiles_gfp); if (ret < 0) { if (ret == -EEXIST) { + put_page(backpage); + backpage = NULL; put_page(netpage); + netpage = NULL; fscache_retrieval_complete(op, 1); continue; } @@ -608,7 +611,10 @@ static int cachefiles_read_backing_file(struct cachefiles_object *object, netpage->index, cachefiles_gfp); if (ret < 0) { if (ret == -EEXIST) { + put_page(backpage); + backpage = NULL; put_page(netpage); + netpage = NULL; fscache_retrieval_complete(op, 1); continue; }
From: Yunjian Wang wangyunjian@huawei.com
[ Upstream commit e4c39f7926b4de355f7df75651d75003806aae09 ]
This patch fixes the variable 'phy_word' may be used uninitialized.
Signed-off-by: Yunjian Wang wangyunjian@huawei.com Tested-by: Aaron Brown aaron.f.brown@intel.com Signed-off-by: Jeff Kirsher jeffrey.t.kirsher@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/intel/igb/e1000_i210.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/net/ethernet/intel/igb/e1000_i210.c b/drivers/net/ethernet/intel/igb/e1000_i210.c index c54ebedca6da..c393cb2c0f16 100644 --- a/drivers/net/ethernet/intel/igb/e1000_i210.c +++ b/drivers/net/ethernet/intel/igb/e1000_i210.c @@ -842,6 +842,7 @@ s32 igb_pll_workaround_i210(struct e1000_hw *hw) nvm_word = E1000_INVM_DEFAULT_AL; tmp_nvm = nvm_word | E1000_INVM_PLL_WO_VAL; igb_write_phy_reg_82580(hw, I347AT4_PAGE_SELECT, E1000_PHY_PLL_FREQ_PAGE); + phy_word = E1000_PHY_PLL_UNCONF; for (i = 0; i < E1000_MAX_PLL_TRIES; i++) { /* check current state directly from internal PHY */ igb_read_phy_reg_82580(hw, E1000_PHY_PLL_FREQ_REG, &phy_word);
From: Josh Elsasser jelsasser@appneta.com
[ Upstream commit a8bf879af7b1999eba36303ce9cc60e0e7dd816c ]
Add the two 1000BaseLX enum values to the X550's check for 1Gbps modules, allowing the core driver code to establish a link over this SFP type.
This is done by the out-of-tree driver but the fix wasn't in mainline.
Fixes: e23f33367882 ("ixgbe: Fix 1G and 10G link stability for X550EM_x SFP+”) Fixes: 6a14ee0cfb19 ("ixgbe: Add X550 support function pointers") Signed-off-by: Josh Elsasser jelsasser@appneta.com Tested-by: Andrew Bowers andrewx.bowers@intel.com Signed-off-by: Jeff Kirsher jeffrey.t.kirsher@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c index a8148c7126e5..9772016222c3 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c @@ -2248,7 +2248,9 @@ static s32 ixgbe_get_link_capabilities_X550em(struct ixgbe_hw *hw, *autoneg = false;
if (hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 || - hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1) { + hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1 || + hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 || + hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1) { *speed = IXGBE_LINK_SPEED_1GB_FULL; return 0; }
From: Pan Bian bianpan2016@163.com
[ Upstream commit cfc435198f53a6fa1f656d98466b24967ff457d0 ]
skb is freed via dev_kfree_skb_any, however, skb->len is read then. This may result in a use-after-free bug.
Fixes: e6161d64263 ("rapidio/rionet: rework driver initialization and removal") Signed-off-by: Pan Bian bianpan2016@163.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/rionet.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/rionet.c b/drivers/net/rionet.c index e9f101c9bae2..bfbb39f93554 100644 --- a/drivers/net/rionet.c +++ b/drivers/net/rionet.c @@ -216,9 +216,9 @@ static int rionet_start_xmit(struct sk_buff *skb, struct net_device *ndev) * it just report sending a packet to the target * (without actual packet transfer). */ - dev_kfree_skb_any(skb); ndev->stats.tx_packets++; ndev->stats.tx_bytes += skb->len; + dev_kfree_skb_any(skb); } }
From: Pan Bian bianpan2016@163.com
[ Upstream commit c758940158bf29fe14e9d0f89d5848f227b48134 ]
The net device ndev is freed via free_netdev when failing to register the device. The control flow then jumps to the error handling code block. ndev is used and freed again. Resulting in a use-after-free bug.
Signed-off-by: Pan Bian bianpan2016@163.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/hisilicon/hip04_eth.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hip04_eth.c b/drivers/net/ethernet/hisilicon/hip04_eth.c index 14374a856d30..6127697ede12 100644 --- a/drivers/net/ethernet/hisilicon/hip04_eth.c +++ b/drivers/net/ethernet/hisilicon/hip04_eth.c @@ -914,10 +914,8 @@ static int hip04_mac_probe(struct platform_device *pdev) }
ret = register_netdev(ndev); - if (ret) { - free_netdev(ndev); + if (ret) goto alloc_fail; - }
return 0;
From: Julian Wiedmann jwi@linux.ibm.com
[ Upstream commit 9a764c1e59684c0358e16ccaafd870629f2cfe67 ]
The response for a SNMP request can consist of multiple parts, which the cmd callback stages into a kernel buffer until all parts have been received. If the callback detects that the staging buffer provides insufficient space, it bails out with error. This processing is buggy for the first part of the response - while it initially checks for a length of 'data_len', it later copies an additional amount of 'offsetof(struct qeth_snmp_cmd, data)' bytes.
Fix the calculation of 'data_len' for the first part of the response. This also nicely cleans up the memcpy code.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Julian Wiedmann jwi@linux.ibm.com Reviewed-by: Ursula Braun ubraun@linux.ibm.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/s390/net/qeth_core_main.c | 27 ++++++++++++--------------- 1 file changed, 12 insertions(+), 15 deletions(-)
diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index ffce6f39828a..b03515d43745 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -4524,8 +4524,8 @@ static int qeth_snmp_command_cb(struct qeth_card *card, { struct qeth_ipa_cmd *cmd; struct qeth_arp_query_info *qinfo; - struct qeth_snmp_cmd *snmp; unsigned char *data; + void *snmp_data; __u16 data_len;
QETH_CARD_TEXT(card, 3, "snpcmdcb"); @@ -4533,7 +4533,6 @@ static int qeth_snmp_command_cb(struct qeth_card *card, cmd = (struct qeth_ipa_cmd *) sdata; data = (unsigned char *)((char *)cmd - reply->offset); qinfo = (struct qeth_arp_query_info *) reply->param; - snmp = &cmd->data.setadapterparms.data.snmp;
if (cmd->hdr.return_code) { QETH_CARD_TEXT_(card, 4, "scer1%x", cmd->hdr.return_code); @@ -4546,10 +4545,15 @@ static int qeth_snmp_command_cb(struct qeth_card *card, return 0; } data_len = *((__u16 *)QETH_IPA_PDU_LEN_PDU1(data)); - if (cmd->data.setadapterparms.hdr.seq_no == 1) - data_len -= (__u16)((char *)&snmp->data - (char *)cmd); - else - data_len -= (__u16)((char *)&snmp->request - (char *)cmd); + if (cmd->data.setadapterparms.hdr.seq_no == 1) { + snmp_data = &cmd->data.setadapterparms.data.snmp; + data_len -= offsetof(struct qeth_ipa_cmd, + data.setadapterparms.data.snmp); + } else { + snmp_data = &cmd->data.setadapterparms.data.snmp.request; + data_len -= offsetof(struct qeth_ipa_cmd, + data.setadapterparms.data.snmp.request); + }
/* check if there is enough room in userspace */ if ((qinfo->udata_len - qinfo->udata_offset) < data_len) { @@ -4562,16 +4566,9 @@ static int qeth_snmp_command_cb(struct qeth_card *card, QETH_CARD_TEXT_(card, 4, "sseqn%i", cmd->data.setadapterparms.hdr.seq_no); /*copy entries to user buffer*/ - if (cmd->data.setadapterparms.hdr.seq_no == 1) { - memcpy(qinfo->udata + qinfo->udata_offset, - (char *)snmp, - data_len + offsetof(struct qeth_snmp_cmd, data)); - qinfo->udata_offset += offsetof(struct qeth_snmp_cmd, data); - } else { - memcpy(qinfo->udata + qinfo->udata_offset, - (char *)&snmp->request, data_len); - } + memcpy(qinfo->udata + qinfo->udata_offset, snmp_data, data_len); qinfo->udata_offset += data_len; + /* check if all replies received ... */ QETH_CARD_TEXT_(card, 4, "srtot%i", cmd->data.setadapterparms.hdr.used_total);
From: shaoyunl shaoyun.liu@amd.com
[ Upstream commit ad97d9de45835b6a0f71983b0ae0cffd7306730a ]
Driver shouldn't try to access any GFX registers until RLC is idle. During the test, it took 12 seconds for RLC to clear the BUSY bit in RLC_GPM_STAT register which is un-acceptable for driver. As per RLC engineer, it would take RLC Ucode less than 10,000 GFXCLK cycles to finish its critical section. In a lowest 300M enginer clock setting(default from vbios), 50 us delay is enough.
This commit fix the hang when RLC introduce the work around for XGMI which requires more cycles to setup more registers than normal
Signed-off-by: shaoyunl shaoyun.liu@amd.com Acked-by: Felix Kuehling Felix.Kuehling@amd.com Signed-off-by: Alex Deucher alexander.deucher@amd.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c index ef00d14f8645..325e2213cac5 100644 --- a/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c +++ b/drivers/gpu/drm/amd/amdgpu/gfx_v9_0.c @@ -2243,12 +2243,13 @@ static void gfx_v9_0_rlc_start(struct amdgpu_device *adev) #endif
WREG32_FIELD15(GC, 0, RLC_CNTL, RLC_ENABLE_F32, 1); + udelay(50);
/* carrizo do enable cp interrupt after cp inited */ - if (!(adev->flags & AMD_IS_APU)) + if (!(adev->flags & AMD_IS_APU)) { gfx_v9_0_enable_gui_idle_interrupt(adev, true); - - udelay(50); + udelay(50); + }
#ifdef AMDGPU_RLC_DEBUG_RETRY /* RLC_GPM_GENERAL_6 : RLC Ucode version */
From: "Y.C. Chen" yc_chen@aspeedtech.com
[ Upstream commit 300625620314194d9e6d4f6dda71f2dc9cf62d9f ]
v1: over-sample data to increase the stability with some specific monitors v2: refine to avoid infinite loop v3: remove un-necessary "volatile" declaration
[airlied: fix two checkpatch warnings]
Signed-off-by: Y.C. Chen yc_chen@aspeedtech.com Signed-off-by: Dave Airlie airlied@redhat.com Link: https://patchwork.freedesktop.org/patch/msgid/1542858988-1127-1-git-send-ema... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/ast/ast_mode.c | 36 ++++++++++++++++++++++++++++------ 1 file changed, 30 insertions(+), 6 deletions(-)
diff --git a/drivers/gpu/drm/ast/ast_mode.c b/drivers/gpu/drm/ast/ast_mode.c index 7c6ac3cadb6b..8bb355d5d43d 100644 --- a/drivers/gpu/drm/ast/ast_mode.c +++ b/drivers/gpu/drm/ast/ast_mode.c @@ -973,9 +973,21 @@ static int get_clock(void *i2c_priv) { struct ast_i2c_chan *i2c = i2c_priv; struct ast_private *ast = i2c->dev->dev_private; - uint32_t val; + uint32_t val, val2, count, pass; + + count = 0; + pass = 0; + val = (ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x10) >> 4) & 0x01; + do { + val2 = (ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x10) >> 4) & 0x01; + if (val == val2) { + pass++; + } else { + pass = 0; + val = (ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x10) >> 4) & 0x01; + } + } while ((pass < 5) && (count++ < 0x10000));
- val = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x10) >> 4; return val & 1 ? 1 : 0; }
@@ -983,9 +995,21 @@ static int get_data(void *i2c_priv) { struct ast_i2c_chan *i2c = i2c_priv; struct ast_private *ast = i2c->dev->dev_private; - uint32_t val; + uint32_t val, val2, count, pass; + + count = 0; + pass = 0; + val = (ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x20) >> 5) & 0x01; + do { + val2 = (ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x20) >> 5) & 0x01; + if (val == val2) { + pass++; + } else { + pass = 0; + val = (ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x20) >> 5) & 0x01; + } + } while ((pass < 5) && (count++ < 0x10000));
- val = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x20) >> 5; return val & 1 ? 1 : 0; }
@@ -998,7 +1022,7 @@ static void set_clock(void *i2c_priv, int clock)
for (i = 0; i < 0x10000; i++) { ujcrb7 = ((clock & 0x01) ? 0 : 1); - ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0xfe, ujcrb7); + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0xf4, ujcrb7); jtemp = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x01); if (ujcrb7 == jtemp) break; @@ -1014,7 +1038,7 @@ static void set_data(void *i2c_priv, int data)
for (i = 0; i < 0x10000; i++) { ujcrb7 = ((data & 0x01) ? 0 : 1) << 2; - ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0xfb, ujcrb7); + ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0xf1, ujcrb7); jtemp = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x04); if (ujcrb7 == jtemp) break;
On Wed, 2018-12-05 at 04:35 -0500, Sasha Levin wrote:
From: "Y.C. Chen" yc_chen@aspeedtech.com
[]
diff --git a/drivers/gpu/drm/ast/ast_mode.c b/drivers/gpu/drm/ast/ast_mode.c
[]
@@ -973,9 +973,21 @@ static int get_clock(void *i2c_priv) { struct ast_i2c_chan *i2c = i2c_priv; struct ast_private *ast = i2c->dev->dev_private;
- uint32_t val;
- uint32_t val, val2, count, pass;
- count = 0;
- pass = 0;
- val = (ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x10) >> 4) & 0x01;
- do {
val2 = (ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x10) >> 4) & 0x01;
These could have been simpler as bool using BIT
val = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb7, 0x10) & BIT(4); etc...
From: Srikanth Boddepalli boddepalli.srikanth@gmail.com
[ Upstream commit 72791ac854fea36034fa7976b748fde585008e78 ]
Add a missing header otherwise compiler warns about missed prototype:
drivers/xen/xlate_mmu.c:183:5: warning: no previous prototype for 'xen_xlate_unmap_gfn_range?' [-Wmissing-prototypes] int xen_xlate_unmap_gfn_range(struct vm_area_struct *vma, ^~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Srikanth Boddepalli boddepalli.srikanth@gmail.com Reviewed-by: Boris Ostrovsky boris.ostrovsky@oracle.com Reviewed-by: Joey Pabalinas joeypabalinas@gmail.com Signed-off-by: Juergen Gross jgross@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/xen/xlate_mmu.c | 1 + 1 file changed, 1 insertion(+)
diff --git a/drivers/xen/xlate_mmu.c b/drivers/xen/xlate_mmu.c index 23f1387b3ef7..e7df65d32c91 100644 --- a/drivers/xen/xlate_mmu.c +++ b/drivers/xen/xlate_mmu.c @@ -36,6 +36,7 @@ #include <asm/xen/hypervisor.h>
#include <xen/xen.h> +#include <xen/xen-ops.h> #include <xen/page.h> #include <xen/interface/xen.h> #include <xen/interface/memory.h>
From: Igor Druzhinin igor.druzhinin@citrix.com
[ Upstream commit 123664101aa2156d05251704fc63f9bcbf77741a ]
This reverts commit b3cf8528bb21febb650a7ecbf080d0647be40b9f.
That commit unintentionally broke Xen balloon memory hotplug with "hotplug_unpopulated" set to 1. As long as "System RAM" resource got assigned under a new "Unusable memory" resource in IO/Mem tree any attempt to online this memory would fail due to general kernel restrictions on having "System RAM" resources as 1st level only.
The original issue that commit has tried to workaround fa564ad96366 ("x86/PCI: Enable a 64bit BAR on AMD Family 15h (Models 00-1f, 30-3f, 60-7f)") also got amended by the following 03a551734 ("x86/PCI: Move and shrink AMD 64-bit window to avoid conflict") which made the original fix to Xen ballooning unnecessary.
Signed-off-by: Igor Druzhinin igor.druzhinin@citrix.com Reviewed-by: Boris Ostrovsky boris.ostrovsky@oracle.com Signed-off-by: Juergen Gross jgross@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/x86/xen/enlighten.c | 78 ---------------------------------------- arch/x86/xen/setup.c | 6 ++-- drivers/xen/balloon.c | 65 +++++---------------------------- include/xen/balloon.h | 5 --- 4 files changed, 13 insertions(+), 141 deletions(-)
diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 2eeddd814653..c6c7c9b7b5c1 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -7,7 +7,6 @@
#include <xen/features.h> #include <xen/page.h> -#include <xen/interface/memory.h>
#include <asm/xen/hypercall.h> #include <asm/xen/hypervisor.h> @@ -343,80 +342,3 @@ void xen_arch_unregister_cpu(int num) } EXPORT_SYMBOL(xen_arch_unregister_cpu); #endif - -#ifdef CONFIG_XEN_BALLOON_MEMORY_HOTPLUG -void __init arch_xen_balloon_init(struct resource *hostmem_resource) -{ - struct xen_memory_map memmap; - int rc; - unsigned int i, last_guest_ram; - phys_addr_t max_addr = PFN_PHYS(max_pfn); - struct e820_table *xen_e820_table; - const struct e820_entry *entry; - struct resource *res; - - if (!xen_initial_domain()) - return; - - xen_e820_table = kmalloc(sizeof(*xen_e820_table), GFP_KERNEL); - if (!xen_e820_table) - return; - - memmap.nr_entries = ARRAY_SIZE(xen_e820_table->entries); - set_xen_guest_handle(memmap.buffer, xen_e820_table->entries); - rc = HYPERVISOR_memory_op(XENMEM_machine_memory_map, &memmap); - if (rc) { - pr_warn("%s: Can't read host e820 (%d)\n", __func__, rc); - goto out; - } - - last_guest_ram = 0; - for (i = 0; i < memmap.nr_entries; i++) { - if (xen_e820_table->entries[i].addr >= max_addr) - break; - if (xen_e820_table->entries[i].type == E820_TYPE_RAM) - last_guest_ram = i; - } - - entry = &xen_e820_table->entries[last_guest_ram]; - if (max_addr >= entry->addr + entry->size) - goto out; /* No unallocated host RAM. */ - - hostmem_resource->start = max_addr; - hostmem_resource->end = entry->addr + entry->size; - - /* - * Mark non-RAM regions between the end of dom0 RAM and end of host RAM - * as unavailable. The rest of that region can be used for hotplug-based - * ballooning. - */ - for (; i < memmap.nr_entries; i++) { - entry = &xen_e820_table->entries[i]; - - if (entry->type == E820_TYPE_RAM) - continue; - - if (entry->addr >= hostmem_resource->end) - break; - - res = kzalloc(sizeof(*res), GFP_KERNEL); - if (!res) - goto out; - - res->name = "Unavailable host RAM"; - res->start = entry->addr; - res->end = (entry->addr + entry->size < hostmem_resource->end) ? - entry->addr + entry->size : hostmem_resource->end; - rc = insert_resource(hostmem_resource, res); - if (rc) { - pr_warn("%s: Can't insert [%llx - %llx) (%d)\n", - __func__, res->start, res->end, rc); - kfree(res); - goto out; - } - } - - out: - kfree(xen_e820_table); -} -#endif /* CONFIG_XEN_BALLOON_MEMORY_HOTPLUG */ diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index 1163e33121fb..075ed47993bb 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -808,6 +808,7 @@ char * __init xen_memory_setup(void) addr = xen_e820_table.entries[0].addr; size = xen_e820_table.entries[0].size; while (i < xen_e820_table.nr_entries) { + bool discard = false;
chunk_size = size; type = xen_e820_table.entries[i].type; @@ -823,10 +824,11 @@ char * __init xen_memory_setup(void) xen_add_extra_mem(pfn_s, n_pfns); xen_max_p2m_pfn = pfn_s + n_pfns; } else - type = E820_TYPE_UNUSABLE; + discard = true; }
- xen_align_and_add_e820_region(addr, chunk_size, type); + if (!discard) + xen_align_and_add_e820_region(addr, chunk_size, type);
addr += chunk_size; size -= chunk_size; diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c index e12bb256036f..7ab6caef599c 100644 --- a/drivers/xen/balloon.c +++ b/drivers/xen/balloon.c @@ -251,25 +251,10 @@ static void release_memory_resource(struct resource *resource) kfree(resource); }
-/* - * Host memory not allocated to dom0. We can use this range for hotplug-based - * ballooning. - * - * It's a type-less resource. Setting IORESOURCE_MEM will make resource - * management algorithms (arch_remove_reservations()) look into guest e820, - * which we don't want. - */ -static struct resource hostmem_resource = { - .name = "Host RAM", -}; - -void __attribute__((weak)) __init arch_xen_balloon_init(struct resource *res) -{} - static struct resource *additional_memory_resource(phys_addr_t size) { - struct resource *res, *res_hostmem; - int ret = -ENOMEM; + struct resource *res; + int ret;
res = kzalloc(sizeof(*res), GFP_KERNEL); if (!res) @@ -278,42 +263,13 @@ static struct resource *additional_memory_resource(phys_addr_t size) res->name = "System RAM"; res->flags = IORESOURCE_SYSTEM_RAM | IORESOURCE_BUSY;
- res_hostmem = kzalloc(sizeof(*res), GFP_KERNEL); - if (res_hostmem) { - /* Try to grab a range from hostmem */ - res_hostmem->name = "Host memory"; - ret = allocate_resource(&hostmem_resource, res_hostmem, - size, 0, -1, - PAGES_PER_SECTION * PAGE_SIZE, NULL, NULL); - } - - if (!ret) { - /* - * Insert this resource into iomem. Because hostmem_resource - * tracks portion of guest e820 marked as UNUSABLE noone else - * should try to use it. - */ - res->start = res_hostmem->start; - res->end = res_hostmem->end; - ret = insert_resource(&iomem_resource, res); - if (ret < 0) { - pr_err("Can't insert iomem_resource [%llx - %llx]\n", - res->start, res->end); - release_memory_resource(res_hostmem); - res_hostmem = NULL; - res->start = res->end = 0; - } - } - - if (ret) { - ret = allocate_resource(&iomem_resource, res, - size, 0, -1, - PAGES_PER_SECTION * PAGE_SIZE, NULL, NULL); - if (ret < 0) { - pr_err("Cannot allocate new System RAM resource\n"); - kfree(res); - return NULL; - } + ret = allocate_resource(&iomem_resource, res, + size, 0, -1, + PAGES_PER_SECTION * PAGE_SIZE, NULL, NULL); + if (ret < 0) { + pr_err("Cannot allocate new System RAM resource\n"); + kfree(res); + return NULL; }
#ifdef CONFIG_SPARSEMEM @@ -325,7 +281,6 @@ static struct resource *additional_memory_resource(phys_addr_t size) pr_err("New System RAM resource outside addressable RAM (%lu > %lu)\n", pfn, limit); release_memory_resource(res); - release_memory_resource(res_hostmem); return NULL; } } @@ -747,8 +702,6 @@ static int __init balloon_init(void) set_online_page_callback(&xen_online_page); register_memory_notifier(&xen_memory_nb); register_sysctl_table(xen_root); - - arch_xen_balloon_init(&hostmem_resource); #endif
#ifdef CONFIG_XEN_PV diff --git a/include/xen/balloon.h b/include/xen/balloon.h index 61f410fd74e4..4914b93a23f2 100644 --- a/include/xen/balloon.h +++ b/include/xen/balloon.h @@ -44,8 +44,3 @@ static inline void xen_balloon_init(void) { } #endif - -#ifdef CONFIG_XEN_BALLOON_MEMORY_HOTPLUG -struct resource; -void arch_xen_balloon_init(struct resource *hostmem_resource); -#endif
From: Pan Bian bianpan2016@163.com
[ Upstream commit 975ef94a0284648fb0137bd5e949b18cef604e33 ]
kfree() is incorrectly used to release the pages allocated by __get_free_page() and __get_free_pages(). Use the matching deallocators i.e., free_page() and free_pages(), respectively.
Signed-off-by: Pan Bian bianpan2016@163.com Reviewed-by: Stefano Stabellini sstabellini@kernel.org Signed-off-by: Juergen Gross jgross@suse.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/xen/pvcalls-front.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/xen/pvcalls-front.c b/drivers/xen/pvcalls-front.c index 2f11ca72a281..77224d8f3e6f 100644 --- a/drivers/xen/pvcalls-front.c +++ b/drivers/xen/pvcalls-front.c @@ -385,8 +385,8 @@ static int create_active(struct sock_mapping *map, int *evtchn) out_error: if (*evtchn >= 0) xenbus_free_evtchn(pvcalls_front_dev, *evtchn); - kfree(map->active.data.in); - kfree(map->active.ring); + free_pages((unsigned long)map->active.data.in, PVCALLS_RING_ORDER); + free_page((unsigned long)map->active.ring); return ret; }
From: Kees Cook keescook@chromium.org
[ Upstream commit 89d328f637b9904b6d4c9af73c8a608b8dd4d6f8 ]
The actual number of bytes stored in a PRZ is smaller than the bytes requested by platform data, since there is a header on each PRZ. Additionally, if ECC is enabled, there are trailing bytes used as well. Normally this mismatch doesn't matter since PRZs are circular buffers and the leading "overflow" bytes are just thrown away. However, in the case of a compressed record, this rather badly corrupts the results.
This corruption was visible with "ramoops.mem_size=204800 ramoops.ecc=1". Any stored crashes would not be uncompressable (producing a pstorefs "dmesg-*.enc.z" file), and triggering errors at boot:
[ 2.790759] pstore: crypto_comp_decompress failed, ret = -22!
Backporting this depends on commit 70ad35db3321 ("pstore: Convert console write to use ->write_buf")
Reported-by: Joel Fernandes joel@joelfernandes.org Fixes: b0aad7a99c1d ("pstore: Add compression support to pstore") Signed-off-by: Kees Cook keescook@chromium.org Reviewed-by: Joel Fernandes (Google) joel@joelfernandes.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/pstore/ram.c | 15 ++++++--------- include/linux/pstore.h | 5 ++++- 2 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/fs/pstore/ram.c b/fs/pstore/ram.c index f4fd2e72add4..03cd59375abe 100644 --- a/fs/pstore/ram.c +++ b/fs/pstore/ram.c @@ -806,17 +806,14 @@ static int ramoops_probe(struct platform_device *pdev)
cxt->pstore.data = cxt; /* - * Console can handle any buffer size, so prefer LOG_LINE_MAX. If we - * have to handle dumps, we must have at least record_size buffer. And - * for ftrace, bufsize is irrelevant (if bufsize is 0, buf will be - * ZERO_SIZE_PTR). + * Since bufsize is only used for dmesg crash dumps, it + * must match the size of the dprz record (after PRZ header + * and ECC bytes have been accounted for). */ - if (cxt->console_size) - cxt->pstore.bufsize = 1024; /* LOG_LINE_MAX */ - cxt->pstore.bufsize = max(cxt->record_size, cxt->pstore.bufsize); - cxt->pstore.buf = kmalloc(cxt->pstore.bufsize, GFP_KERNEL); + cxt->pstore.bufsize = cxt->dprzs[0]->buffer_size; + cxt->pstore.buf = kzalloc(cxt->pstore.bufsize, GFP_KERNEL); if (!cxt->pstore.buf) { - pr_err("cannot allocate pstore buffer\n"); + pr_err("cannot allocate pstore crash dump buffer\n"); err = -ENOMEM; goto fail_clear; } diff --git a/include/linux/pstore.h b/include/linux/pstore.h index a15bc4d48752..30fcec375a3a 100644 --- a/include/linux/pstore.h +++ b/include/linux/pstore.h @@ -90,7 +90,10 @@ struct pstore_record { * * @buf_lock: spinlock to serialize access to @buf * @buf: preallocated crash dump buffer - * @bufsize: size of @buf available for crash dump writes + * @bufsize: size of @buf available for crash dump bytes (must match + * smallest number of bytes available for writing to a + * backend entry, since compressed bytes don't take kindly + * to being truncated) * * @read_mutex: serializes @open, @read, @close, and @erase callbacks * @flags: bitfield of frontends the backend can accept writes for
On Wed, Dec 5, 2018 at 1:41 AM Sasha Levin sashal@kernel.org wrote:
From: Kees Cook keescook@chromium.org
[ Upstream commit 89d328f637b9904b6d4c9af73c8a608b8dd4d6f8 ]
The actual number of bytes stored in a PRZ is smaller than the bytes requested by platform data, since there is a header on each PRZ. Additionally, if ECC is enabled, there are trailing bytes used as well. Normally this mismatch doesn't matter since PRZs are circular buffers and the leading "overflow" bytes are just thrown away. However, in the case of a compressed record, this rather badly corrupts the results.
This corruption was visible with "ramoops.mem_size=204800 ramoops.ecc=1". Any stored crashes would not be uncompressable (producing a pstorefs "dmesg-*.enc.z" file), and triggering errors at boot:
[ 2.790759] pstore: crypto_comp_decompress failed, ret = -22!
Backporting this depends on commit 70ad35db3321 ("pstore: Convert console write to use ->write_buf")
Please note the above. If this gets backported, this one is needed too.
-Kees
Reported-by: Joel Fernandes joel@joelfernandes.org Fixes: b0aad7a99c1d ("pstore: Add compression support to pstore") Signed-off-by: Kees Cook keescook@chromium.org Reviewed-by: Joel Fernandes (Google) joel@joelfernandes.org Signed-off-by: Sasha Levin sashal@kernel.org
fs/pstore/ram.c | 15 ++++++--------- include/linux/pstore.h | 5 ++++- 2 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/fs/pstore/ram.c b/fs/pstore/ram.c index f4fd2e72add4..03cd59375abe 100644 --- a/fs/pstore/ram.c +++ b/fs/pstore/ram.c @@ -806,17 +806,14 @@ static int ramoops_probe(struct platform_device *pdev)
cxt->pstore.data = cxt; /*
* Console can handle any buffer size, so prefer LOG_LINE_MAX. If we* have to handle dumps, we must have at least record_size buffer. And* for ftrace, bufsize is irrelevant (if bufsize is 0, buf will be* ZERO_SIZE_PTR).
* Since bufsize is only used for dmesg crash dumps, it* must match the size of the dprz record (after PRZ header* and ECC bytes have been accounted for). */
if (cxt->console_size)cxt->pstore.bufsize = 1024; /* LOG_LINE_MAX */cxt->pstore.bufsize = max(cxt->record_size, cxt->pstore.bufsize);cxt->pstore.buf = kmalloc(cxt->pstore.bufsize, GFP_KERNEL);
cxt->pstore.bufsize = cxt->dprzs[0]->buffer_size;cxt->pstore.buf = kzalloc(cxt->pstore.bufsize, GFP_KERNEL); if (!cxt->pstore.buf) {
pr_err("cannot allocate pstore buffer\n");
pr_err("cannot allocate pstore crash dump buffer\n"); err = -ENOMEM; goto fail_clear; }diff --git a/include/linux/pstore.h b/include/linux/pstore.h index a15bc4d48752..30fcec375a3a 100644 --- a/include/linux/pstore.h +++ b/include/linux/pstore.h @@ -90,7 +90,10 @@ struct pstore_record {
- @buf_lock: spinlock to serialize access to @buf
- @buf: preallocated crash dump buffer
- @bufsize: size of @buf available for crash dump writes
- @bufsize: size of @buf available for crash dump bytes (must match
smallest number of bytes available for writing to a
backend entry, since compressed bytes don't take kindly
to being truncated)- @read_mutex: serializes @open, @read, @close, and @erase callbacks
- @flags: bitfield of frontends the backend can accept writes for
-- 2.17.1
On Wed, Dec 05, 2018 at 02:57:08PM -0800, Kees Cook wrote:
On Wed, Dec 5, 2018 at 1:41 AM Sasha Levin sashal@kernel.org wrote:
From: Kees Cook keescook@chromium.org
[ Upstream commit 89d328f637b9904b6d4c9af73c8a608b8dd4d6f8 ]
The actual number of bytes stored in a PRZ is smaller than the bytes requested by platform data, since there is a header on each PRZ. Additionally, if ECC is enabled, there are trailing bytes used as well. Normally this mismatch doesn't matter since PRZs are circular buffers and the leading "overflow" bytes are just thrown away. However, in the case of a compressed record, this rather badly corrupts the results.
This corruption was visible with "ramoops.mem_size=204800 ramoops.ecc=1". Any stored crashes would not be uncompressable (producing a pstorefs "dmesg-*.enc.z" file), and triggering errors at boot:
[ 2.790759] pstore: crypto_comp_decompress failed, ret = -22!
Backporting this depends on commit 70ad35db3321 ("pstore: Convert console write to use ->write_buf")
Please note the above. If this gets backported, this one is needed too.
Okay, I've added 70ad35db3321 for 4.9, 4.4, and 3.18.
-- Thanks, Sasha
From: David Howells dhowells@redhat.com
[ Upstream commit ae3b7361dc0ee9a425bf7d77ce211f533500b39b ]
When afs_validate() is called to validate a vnode (inode), there are two unhandled cases in the fastpath at the top of the function:
(1) If the vnode is promised (AFS_VNODE_CB_PROMISED is set), the break counters match and the data has expired, then there's an implicit case in which the vnode needs revalidating.
This has no consequences since the default "valid = false" set at the top of the function happens to do the right thing.
(2) If the vnode is not promised and it hasn't been deleted (AFS_VNODE_DELETED is not set) then there's a default case we're not handling in which the vnode is invalid. If the vnode is invalid, we need to bring cb_s_break and cb_v_break up to date before we refetch the status.
As a consequence, once the server loses track of the client (ie. sufficient time has passed since we last sent it an operation), it will send us a CB.InitCallBackState* operation when we next try to talk to it. This calls afs_init_callback_state() which increments afs_server::cb_s_break, but this then doesn't propagate to the afs_vnode record.
The result being that every afs_validate() call thereafter sends a status fetch operation to the server.
Clarify and fix this by:
(A) Setting valid in all the branches rather than initialising it at the top so that the compiler catches where we've missed.
(B) Restructuring the logic in the 'promised' branch so that we set valid to false if the callback is due to expire (or has expired) and so that the final case is that the vnode is still valid.
(C) Adding an else-statement that ups cb_s_break and cb_v_break if the promised and deleted cases don't match.
Fixes: c435ee34551e ("afs: Overhaul the callback handling") Signed-off-by: David Howells dhowells@redhat.com Signed-off-by: Al Viro viro@zeniv.linux.org.uk Signed-off-by: Sasha Levin sashal@kernel.org --- fs/afs/inode.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-)
diff --git a/fs/afs/inode.c b/fs/afs/inode.c index 479b7fdda124..071075d775a9 100644 --- a/fs/afs/inode.c +++ b/fs/afs/inode.c @@ -379,7 +379,7 @@ void afs_zap_data(struct afs_vnode *vnode) int afs_validate(struct afs_vnode *vnode, struct key *key) { time64_t now = ktime_get_real_seconds(); - bool valid = false; + bool valid; int ret;
_enter("{v={%x:%u} fl=%lx},%x", @@ -399,15 +399,21 @@ int afs_validate(struct afs_vnode *vnode, struct key *key) vnode->cb_v_break = vnode->volume->cb_v_break; valid = false; } else if (vnode->status.type == AFS_FTYPE_DIR && - test_bit(AFS_VNODE_DIR_VALID, &vnode->flags) && - vnode->cb_expires_at - 10 > now) { - valid = true; - } else if (!test_bit(AFS_VNODE_ZAP_DATA, &vnode->flags) && - vnode->cb_expires_at - 10 > now) { + (!test_bit(AFS_VNODE_DIR_VALID, &vnode->flags) || + vnode->cb_expires_at - 10 <= now)) { + valid = false; + } else if (test_bit(AFS_VNODE_ZAP_DATA, &vnode->flags) || + vnode->cb_expires_at - 10 <= now) { + valid = false; + } else { valid = true; } } else if (test_bit(AFS_VNODE_DELETED, &vnode->flags)) { valid = true; + } else { + vnode->cb_s_break = vnode->cb_interest->server->cb_s_break; + vnode->cb_v_break = vnode->volume->cb_v_break; + valid = false; }
read_sequnlock_excl(&vnode->cb_lock);
From: NeilBrown neilb@suse.com
[ Upstream commit c5a94f434c82529afda290df3235e4d85873c5b4 ]
It was observed that a process blocked indefintely in __fscache_read_or_alloc_page(), waiting for FSCACHE_COOKIE_LOOKING_UP to be cleared via fscache_wait_for_deferred_lookup().
At this time, ->backing_objects was empty, which would normaly prevent __fscache_read_or_alloc_page() from getting to the point of waiting. This implies that ->backing_objects was cleared *after* __fscache_read_or_alloc_page was was entered.
When an object is "killed" and then "dropped", FSCACHE_COOKIE_LOOKING_UP is cleared in fscache_lookup_failure(), then KILL_OBJECT and DROP_OBJECT are "called" and only in DROP_OBJECT is ->backing_objects cleared. This leaves a window where something else can set FSCACHE_COOKIE_LOOKING_UP and __fscache_read_or_alloc_page() can start waiting, before ->backing_objects is cleared
There is some uncertainty in this analysis, but it seems to be fit the observations. Adding the wake in this patch will be handled correctly by __fscache_read_or_alloc_page(), as it checks if ->backing_objects is empty again, after waiting.
Customer which reported the hang, also report that the hang cannot be reproduced with this fix.
The backtrace for the blocked process looked like:
PID: 29360 TASK: ffff881ff2ac0f80 CPU: 3 COMMAND: "zsh" #0 [ffff881ff43efbf8] schedule at ffffffff815e56f1 #1 [ffff881ff43efc58] bit_wait at ffffffff815e64ed #2 [ffff881ff43efc68] __wait_on_bit at ffffffff815e61b8 #3 [ffff881ff43efca0] out_of_line_wait_on_bit at ffffffff815e625e #4 [ffff881ff43efd08] fscache_wait_for_deferred_lookup at ffffffffa04f2e8f [fscache] #5 [ffff881ff43efd18] __fscache_read_or_alloc_page at ffffffffa04f2ffe [fscache] #6 [ffff881ff43efd58] __nfs_readpage_from_fscache at ffffffffa0679668 [nfs] #7 [ffff881ff43efd78] nfs_readpage at ffffffffa067092b [nfs] #8 [ffff881ff43efda0] generic_file_read_iter at ffffffff81187a73 #9 [ffff881ff43efe50] nfs_file_read at ffffffffa066544b [nfs] #10 [ffff881ff43efe70] __vfs_read at ffffffff811fc756 #11 [ffff881ff43efee8] vfs_read at ffffffff811fccfa #12 [ffff881ff43eff18] sys_read at ffffffff811fda62 #13 [ffff881ff43eff50] entry_SYSCALL_64_fastpath at ffffffff815e986e
Signed-off-by: NeilBrown neilb@suse.com Signed-off-by: David Howells dhowells@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/fscache/object.c | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/fs/fscache/object.c b/fs/fscache/object.c index 9edc920f651f..6d9cb1719de5 100644 --- a/fs/fscache/object.c +++ b/fs/fscache/object.c @@ -730,6 +730,9 @@ static const struct fscache_state *fscache_drop_object(struct fscache_object *ob
if (awaken) wake_up_bit(&cookie->flags, FSCACHE_COOKIE_INVALIDATING); + if (test_and_clear_bit(FSCACHE_COOKIE_LOOKING_UP, &cookie->flags)) + wake_up_bit(&cookie->flags, FSCACHE_COOKIE_LOOKING_UP); +
/* Prevent a race with our last child, which has to signal EV_CLEARED * before dropping our spinlock.
From: Nathan Chancellor natechancellor@gmail.com
[ Upstream commit b7e768b7e3522695ed36dcb48ecdcd344bd30a9b ]
Clang warns when one enumerated type is implicitly converted to another.
fs/cachefiles/namei.c:247:50: warning: implicit conversion from enumeration type 'enum cachefiles_obj_ref_trace' to different enumeration type 'enum fscache_obj_ref_trace' [-Wenum-conversion] cache->cache.ops->put_object(&xobject->fscache, cachefiles_obj_put_wait_retry);
Silence this warning by explicitly casting to fscache_obj_ref_trace, which is also done in put_object.
Reported-by: Nick Desaulniers ndesaulniers@google.com Signed-off-by: Nathan Chancellor natechancellor@gmail.com Signed-off-by: David Howells dhowells@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/cachefiles/namei.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/fs/cachefiles/namei.c b/fs/cachefiles/namei.c index 95983c744164..5ab411d4bc59 100644 --- a/fs/cachefiles/namei.c +++ b/fs/cachefiles/namei.c @@ -244,11 +244,13 @@ static int cachefiles_mark_object_active(struct cachefiles_cache *cache,
ASSERT(!test_bit(CACHEFILES_OBJECT_ACTIVE, &xobject->flags));
- cache->cache.ops->put_object(&xobject->fscache, cachefiles_obj_put_wait_retry); + cache->cache.ops->put_object(&xobject->fscache, + (enum fscache_obj_ref_trace)cachefiles_obj_put_wait_retry); goto try_again;
requeue: - cache->cache.ops->put_object(&xobject->fscache, cachefiles_obj_put_wait_timeo); + cache->cache.ops->put_object(&xobject->fscache, + (enum fscache_obj_ref_trace)cachefiles_obj_put_wait_timeo); _leave(" = -ETIMEDOUT"); return -ETIMEDOUT; }
From: Colin Ian King colin.king@canonical.com
[ Upstream commit 31ffa563833576bd49a8bf53120568312755e6e2 ]
Variable 'cache' is being assigned but is never used hence it is redundant and can be removed.
Cleans up clang warning: warning: variable 'cache' set but not used [-Wunused-but-set-variable]
Signed-off-by: Colin Ian King colin.king@canonical.com Signed-off-by: David Howells dhowells@redhat.com Signed-off-by: Sasha Levin sashal@kernel.org --- fs/cachefiles/rdwr.c | 3 --- 1 file changed, 3 deletions(-)
diff --git a/fs/cachefiles/rdwr.c b/fs/cachefiles/rdwr.c index db233588a69a..8a577409d030 100644 --- a/fs/cachefiles/rdwr.c +++ b/fs/cachefiles/rdwr.c @@ -968,11 +968,8 @@ void cachefiles_uncache_page(struct fscache_object *_object, struct page *page) __releases(&object->fscache.cookie->lock) { struct cachefiles_object *object; - struct cachefiles_cache *cache;
object = container_of(_object, struct cachefiles_object, fscache); - cache = container_of(object->fscache.cache, - struct cachefiles_cache, cache);
_enter("%p,{%lu}", object, page->index);
From: Christoph Hellwig hch@lst.de
[ Upstream commit 14a1336e6fff47dd1028b484d6c802105c58e2ee ]
Without CONFIG_NVME_MULTIPATH enabled a multi-port subsystem might show up as invididual devices and cause problems, warn about it.
Signed-off-by: Christoph Hellwig hch@lst.de Reviewed-by: Sagi Grimberg sagi@grimberg.me Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/host/nvme.h | 3 +++ 1 file changed, 3 insertions(+)
diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h index bb4a2003c097..60220de2db52 100644 --- a/drivers/nvme/host/nvme.h +++ b/drivers/nvme/host/nvme.h @@ -537,6 +537,9 @@ static inline void nvme_mpath_check_last_path(struct nvme_ns *ns) static inline int nvme_mpath_init(struct nvme_ctrl *ctrl, struct nvme_id_ctrl *id) { + if (ctrl->subsys->cmic & (1 << 3)) + dev_warn(ctrl->device, +"Please enable CONFIG_NVME_MULTIPATH for full support of multi-port devices.\n"); return 0; } static inline void nvme_mpath_uninit(struct nvme_ctrl *ctrl)
From: Sagi Grimberg sagi@grimberg.me
[ Upstream commit f6c8e432cb0479255322c5d0335b9f1699a0270c ]
nvme_stop_ctrl can be called also for reset flow and there is no need to flush the scan_work as namespaces are not being removed. This can cause deadlock in rdma, fc and loop drivers since nvme_stop_ctrl barriers before controller teardown (and specifically I/O cancellation of the scan_work itself) takes place, but the scan_work will be blocked anyways so there is no need to flush it.
Instead, move scan_work flush to nvme_remove_namespaces() where it really needs to flush.
Reported-by: Ming Lei ming.lei@redhat.com Signed-off-by: Sagi Grimberg sagi@grimberg.me Reviewed-by: Keith Busch keith.busch@intel.com Reviewed by: James Smart jsmart2021@gmail.com Tested-by: Ewan D. Milne emilne@redhat.com Signed-off-by: Christoph Hellwig hch@lst.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/host/core.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 0ba301f7e8b4..b7b2659e02fa 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -3308,6 +3308,9 @@ void nvme_remove_namespaces(struct nvme_ctrl *ctrl) struct nvme_ns *ns, *next; LIST_HEAD(ns_list);
+ /* prevent racing with ns scanning */ + flush_work(&ctrl->scan_work); + /* * The dead states indicates the controller was not gracefully * disconnected. In that case, we won't be able to flush any data while @@ -3463,7 +3466,6 @@ void nvme_stop_ctrl(struct nvme_ctrl *ctrl) nvme_mpath_stop(ctrl); nvme_stop_keep_alive(ctrl); flush_work(&ctrl->async_event_work); - flush_work(&ctrl->scan_work); cancel_work_sync(&ctrl->fw_act_work); if (ctrl->ops->stop_ctrl) ctrl->ops->stop_ctrl(ctrl);
From: Prabhath Sajeepa psajeepa@purestorage.com
[ Upstream commit 6344d02dc8f886b6bbcd922ae1a17e4a41500f2d ]
Some error paths in configuration of admin queue free data buffer associated with async request SQE without resetting the data buffer pointer to NULL, This buffer is also freed up again if the controller is shutdown or reset.
Signed-off-by: Prabhath Sajeepa psajeepa@purestorage.com Reviewed-by: Roland Dreier roland@purestorage.com Signed-off-by: Christoph Hellwig hch@lst.de Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/nvme/host/rdma.c | 2 ++ 1 file changed, 2 insertions(+)
diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c index dc042017c293..b6a28de682e8 100644 --- a/drivers/nvme/host/rdma.c +++ b/drivers/nvme/host/rdma.c @@ -184,6 +184,7 @@ static int nvme_rdma_alloc_qe(struct ib_device *ibdev, struct nvme_rdma_qe *qe, qe->dma = ib_dma_map_single(ibdev, qe->data, capsule_size, dir); if (ib_dma_mapping_error(ibdev, qe->dma)) { kfree(qe->data); + qe->data = NULL; return -ENOMEM; }
@@ -816,6 +817,7 @@ static int nvme_rdma_configure_admin_queue(struct nvme_rdma_ctrl *ctrl, out_free_async_qe: nvme_rdma_free_qe(ctrl->device->dev, &ctrl->async_event_sqe, sizeof(struct nvme_command), DMA_TO_DEVICE); + ctrl->async_event_sqe.data = NULL; out_free_queue: nvme_rdma_free_queue(&ctrl->queues[0]); return error;
From: Lorenzo Pieralisi lorenzo.pieralisi@arm.com
[ Upstream commit ea2412dc21cc790335d319181dddc43682aef164 ]
Running the Clang static analyzer on IORT code detected the following error:
Logic error: Branch condition evaluates to a garbage value
in
iort_get_platform_device_domain()
If the named component associated with a given device has no IORT mappings, iort_get_platform_device_domain() exits its MSI mapping loop with msi_parent pointer containing garbage, which can lead to erroneous code path execution.
Initialize the msi_parent pointer, fixing the bug.
Fixes: d4f54a186667 ("ACPI: platform: setup MSI domain for ACPI based platform device") Reported-by: Patrick Bellasi patrick.bellasi@arm.com Reviewed-by: Hanjun Guo hanjun.guo@linaro.org Acked-by: Will Deacon will.deacon@arm.com Cc: Sudeep Holla sudeep.holla@arm.com Cc: "Rafael J. Wysocki" rjw@rjwysocki.net Signed-off-by: Lorenzo Pieralisi lorenzo.pieralisi@arm.com Signed-off-by: Catalin Marinas catalin.marinas@arm.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/acpi/arm64/iort.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/acpi/arm64/iort.c b/drivers/acpi/arm64/iort.c index 08f26db2da7e..e938576e58cb 100644 --- a/drivers/acpi/arm64/iort.c +++ b/drivers/acpi/arm64/iort.c @@ -700,7 +700,7 @@ static void iort_set_device_domain(struct device *dev, */ static struct irq_domain *iort_get_platform_device_domain(struct device *dev) { - struct acpi_iort_node *node, *msi_parent; + struct acpi_iort_node *node, *msi_parent = NULL; struct fwnode_handle *iort_fwnode; struct acpi_iort_its_group *its; int i;
From: Linus Torvalds torvalds@linux-foundation.org
[ Upstream commit b1286ed7158e9b62787508066283ab0b8850b518 ]
New versions of gcc reasonably warn about the odd pattern of
strncpy(p, q, strlen(q));
which really doesn't make sense: the strncpy() ends up being just a slow and odd way to write memcpy() in this case.
Apparently there was a patch for this floating around earlier, but it got lost.
Acked-again-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- lib/test_hexdump.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/lib/test_hexdump.c b/lib/test_hexdump.c index 626f580b4ff7..5144899d3c6b 100644 --- a/lib/test_hexdump.c +++ b/lib/test_hexdump.c @@ -99,7 +99,7 @@ static void __init test_hexdump_prepare_test(size_t len, int rowsize, const char *q = *result++; size_t amount = strlen(q);
- strncpy(p, q, amount); + memcpy(p, q, amount); p += amount;
*p++ = ' ';
From: Linus Torvalds torvalds@linux-foundation.org
[ Upstream commit 38c7b224ce22c25fed04007839edf974bd13439d ]
New versions of gcc reasonably warn about the odd pattern of
strncpy(p, q, strlen(q));
which really doesn't make sense: the strncpy() ends up being just a slow and odd way to write memcpy() in this case.
There was a comment about _why_ the code used strncpy - to avoid the terminating NUL byte, but memcpy does the same and avoids the warning.
Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- scripts/unifdef.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/scripts/unifdef.c b/scripts/unifdef.c index 7493c0ee51cc..db00e3e30a59 100644 --- a/scripts/unifdef.c +++ b/scripts/unifdef.c @@ -395,7 +395,7 @@ usage(void) * When we have processed a group that starts off with a known-false * #if/#elif sequence (which has therefore been deleted) followed by a * #elif that we don't understand and therefore must keep, we edit the - * latter into a #if to keep the nesting correct. We use strncpy() to + * latter into a #if to keep the nesting correct. We use memcpy() to * overwrite the 4 byte token "elif" with "if " without a '\0' byte. * * When we find a true #elif in a group, the following block will @@ -450,7 +450,7 @@ static void Idrop (void) { Fdrop(); ignoreon(); } static void Itrue (void) { Ftrue(); ignoreon(); } static void Ifalse(void) { Ffalse(); ignoreon(); } /* modify this line */ -static void Mpass (void) { strncpy(keyword, "if ", 4); Pelif(); } +static void Mpass (void) { memcpy(keyword, "if ", 4); Pelif(); } static void Mtrue (void) { keywordedit("else"); state(IS_TRUE_MIDDLE); } static void Melif (void) { keywordedit("endif"); state(IS_FALSE_TRAILER); } static void Melse (void) { keywordedit("endif"); state(IS_FALSE_ELSE); }
From: Larry Chen lchen@suse.com
[ Upstream commit e21e57445a64598b29a6f629688f9b9a39e7242a ]
ocfs2_defrag_extent may fall into deadlock.
ocfs2_ioctl_move_extents ocfs2_ioctl_move_extents ocfs2_move_extents ocfs2_defrag_extent ocfs2_lock_allocators_move_extents
ocfs2_reserve_clusters inode_lock GLOBAL_BITMAP_SYSTEM_INODE
__ocfs2_flush_truncate_log inode_lock GLOBAL_BITMAP_SYSTEM_INODE
As backtrace shows above, ocfs2_reserve_clusters() will call inode_lock against the global bitmap if local allocator has not sufficient cluters. Once global bitmap could meet the demand, ocfs2_reserve_cluster will return success with global bitmap locked.
After ocfs2_reserve_cluster(), if truncate log is full, __ocfs2_flush_truncate_log() will definitely fall into deadlock because it needs to inode_lock global bitmap, which has already been locked.
To fix this bug, we could remove from ocfs2_lock_allocators_move_extents() the code which intends to lock global allocator, and put the removed code after __ocfs2_flush_truncate_log().
ocfs2_lock_allocators_move_extents() is referred by 2 places, one is here, the other does not need the data allocator context, which means this patch does not affect the caller so far.
Link: http://lkml.kernel.org/r/20181101071422.14470-1-lchen@suse.com Signed-off-by: Larry Chen lchen@suse.com Reviewed-by: Changwei Ge ge.changwei@h3c.com Cc: Mark Fasheh mark@fasheh.com Cc: Joel Becker jlbec@evilplan.org Cc: Junxiao Bi junxiao.bi@oracle.com Cc: Joseph Qi jiangqi903@gmail.com Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ocfs2/move_extents.c | 47 +++++++++++++++++++++++------------------ 1 file changed, 26 insertions(+), 21 deletions(-)
diff --git a/fs/ocfs2/move_extents.c b/fs/ocfs2/move_extents.c index 7eb3b0a6347e..f55f82ca3425 100644 --- a/fs/ocfs2/move_extents.c +++ b/fs/ocfs2/move_extents.c @@ -156,18 +156,14 @@ static int __ocfs2_move_extent(handle_t *handle, }
/* - * lock allocators, and reserving appropriate number of bits for - * meta blocks and data clusters. - * - * in some cases, we don't need to reserve clusters, just let data_ac - * be NULL. + * lock allocator, and reserve appropriate number of bits for + * meta blocks. */ -static int ocfs2_lock_allocators_move_extents(struct inode *inode, +static int ocfs2_lock_meta_allocator_move_extents(struct inode *inode, struct ocfs2_extent_tree *et, u32 clusters_to_move, u32 extents_to_split, struct ocfs2_alloc_context **meta_ac, - struct ocfs2_alloc_context **data_ac, int extra_blocks, int *credits) { @@ -192,13 +188,6 @@ static int ocfs2_lock_allocators_move_extents(struct inode *inode, goto out; }
- if (data_ac) { - ret = ocfs2_reserve_clusters(osb, clusters_to_move, data_ac); - if (ret) { - mlog_errno(ret); - goto out; - } - }
*credits += ocfs2_calc_extend_credits(osb->sb, et->et_root_el);
@@ -257,10 +246,10 @@ static int ocfs2_defrag_extent(struct ocfs2_move_extents_context *context, } }
- ret = ocfs2_lock_allocators_move_extents(inode, &context->et, *len, 1, - &context->meta_ac, - &context->data_ac, - extra_blocks, &credits); + ret = ocfs2_lock_meta_allocator_move_extents(inode, &context->et, + *len, 1, + &context->meta_ac, + extra_blocks, &credits); if (ret) { mlog_errno(ret); goto out; @@ -283,6 +272,21 @@ static int ocfs2_defrag_extent(struct ocfs2_move_extents_context *context, } }
+ /* + * Make sure ocfs2_reserve_cluster is called after + * __ocfs2_flush_truncate_log, otherwise, dead lock may happen. + * + * If ocfs2_reserve_cluster is called + * before __ocfs2_flush_truncate_log, dead lock on global bitmap + * may happen. + * + */ + ret = ocfs2_reserve_clusters(osb, *len, &context->data_ac); + if (ret) { + mlog_errno(ret); + goto out_unlock_mutex; + } + handle = ocfs2_start_trans(osb, credits); if (IS_ERR(handle)) { ret = PTR_ERR(handle); @@ -600,9 +604,10 @@ static int ocfs2_move_extent(struct ocfs2_move_extents_context *context, } }
- ret = ocfs2_lock_allocators_move_extents(inode, &context->et, len, 1, - &context->meta_ac, - NULL, extra_blocks, &credits); + ret = ocfs2_lock_meta_allocator_move_extents(inode, &context->et, + len, 1, + &context->meta_ac, + extra_blocks, &credits); if (ret) { mlog_errno(ret); goto out;
From: Wei Yang richard.weiyang@gmail.com
[ Upstream commit 8f416836c0d50b198cad1225132e5abebf8980dc ]
init_currently_empty_zone() will adjust pgdat->nr_zones and set it to 'zone_idx(zone) + 1' unconditionally. This is correct in the normal case, while not exact in hot-plug situation.
This function is used in two places:
* free_area_init_core() * move_pfn_range_to_zone()
In the first case, we are sure zone index increase monotonically. While in the second one, this is under users control.
One way to reproduce this is: ----------------------------
1. create a virtual machine with empty node1
-m 4G,slots=32,maxmem=32G \ -smp 4,maxcpus=8 \ -numa node,nodeid=0,mem=4G,cpus=0-3 \ -numa node,nodeid=1,mem=0G,cpus=4-7
2. hot-add cpu 3-7
cpu-add [3-7]
2. hot-add memory to nod1
object_add memory-backend-ram,id=ram0,size=1G device_add pc-dimm,id=dimm0,memdev=ram0,node=1
3. online memory with following order
echo online_movable > memory47/state echo online > memory40/state
After this, node1 will have its nr_zones equals to (ZONE_NORMAL + 1) instead of (ZONE_MOVABLE + 1).
Michal said: "Having an incorrect nr_zones might result in all sorts of problems which would be quite hard to debug (e.g. reclaim not considering the movable zone). I do not expect many users would suffer from this it but still this is trivial and obviously right thing to do so backporting to the stable tree shouldn't be harmful (last famous words)"
Link: http://lkml.kernel.org/r/20181117022022.9956-1-richard.weiyang@gmail.com Fixes: f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") Signed-off-by: Wei Yang richard.weiyang@gmail.com Acked-by: Michal Hocko mhocko@suse.com Reviewed-by: Oscar Salvador osalvador@suse.de Cc: Anshuman Khandual anshuman.khandual@arm.com Cc: Dave Hansen dave.hansen@intel.com Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org
Signed-off-by: Sasha Levin sashal@kernel.org --- mm/page_alloc.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/mm/page_alloc.c b/mm/page_alloc.c index b721631d78ab..6a62b2421cdf 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -5733,8 +5733,10 @@ void __meminit init_currently_empty_zone(struct zone *zone, unsigned long size) { struct pglist_data *pgdat = zone->zone_pgdat; + int zone_idx = zone_idx(zone) + 1;
- pgdat->nr_zones = zone_idx(zone) + 1; + if (zone_idx > pgdat->nr_zones) + pgdat->nr_zones = zone_idx;
zone->zone_start_pfn = zone_start_pfn;
From: Pan Bian bianpan2016@163.com
[ Upstream commit ce96a407adef126870b3f4a1b73529dd8aa80f49 ]
hfs_bmap_free() frees the node via hfs_bnode_put(node). However, it then reads node->this when dumping error message on an error path, which may result in a use-after-free bug. This patch frees the node only when it is never again used.
Link: http://lkml.kernel.org/r/1542963889-128825-1-git-send-email-bianpan2016@163.... Fixes: a1185ffa2fc ("HFS rewrite") Signed-off-by: Pan Bian bianpan2016@163.com Reviewed-by: Andrew Morton akpm@linux-foundation.org Cc: Joe Perches joe@perches.com Cc: Ernesto A. Fernandez ernesto.mnd.fernandez@gmail.com Cc: Viacheslav Dubeyko slava@dubeyko.com Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/hfs/btree.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/fs/hfs/btree.c b/fs/hfs/btree.c index 374b5688e29e..9bdff5e40626 100644 --- a/fs/hfs/btree.c +++ b/fs/hfs/btree.c @@ -329,13 +329,14 @@ void hfs_bmap_free(struct hfs_bnode *node)
nidx -= len * 8; i = node->next; - hfs_bnode_put(node); if (!i) { /* panic */; pr_crit("unable to free bnode %u. bmap not found!\n", node->this); + hfs_bnode_put(node); return; } + hfs_bnode_put(node); node = hfs_bnode_find(tree, i); if (IS_ERR(node)) return;
From: Pan Bian bianpan2016@163.com
[ Upstream commit c7d7d620dcbd2a1c595092280ca943f2fced7bbd ]
hfs_bmap_free() frees node via hfs_bnode_put(node). However it then reads node->this when dumping error message on an error path, which may result in a use-after-free bug. This patch frees node only when it is never used.
Link: http://lkml.kernel.org/r/1543053441-66942-1-git-send-email-bianpan2016@163.c... Signed-off-by: Pan Bian bianpan2016@163.com Reviewed-by: Andrew Morton akpm@linux-foundation.org Cc: Ernesto A. Fernandez ernesto.mnd.fernandez@gmail.com Cc: Joe Perches joe@perches.com Cc: Viacheslav Dubeyko slava@dubeyko.com Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/hfsplus/btree.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/fs/hfsplus/btree.c b/fs/hfsplus/btree.c index de14b2b6881b..3de3bc4918b5 100644 --- a/fs/hfsplus/btree.c +++ b/fs/hfsplus/btree.c @@ -454,14 +454,15 @@ void hfs_bmap_free(struct hfs_bnode *node)
nidx -= len * 8; i = node->next; - hfs_bnode_put(node); if (!i) { /* panic */; pr_crit("unable to free bnode %u. " "bmap not found!\n", node->this); + hfs_bnode_put(node); return; } + hfs_bnode_put(node); node = hfs_bnode_find(tree, i); if (IS_ERR(node)) return;
From: Qian Cai cai@gmx.us
[ Upstream commit 8de456cf87ba863e028c4dd01bae44255ce3d835 ]
CONFIG_DEBUG_OBJECTS_RCU_HEAD does not play well with kmemleak due to recursive calls.
fill_pool kmemleak_ignore make_black_object put_object __call_rcu (kernel/rcu/tree.c) debug_rcu_head_queue debug_object_activate debug_object_init fill_pool kmemleak_ignore make_black_object ...
So add SLAB_NOLEAKTRACE to kmem_cache_create() to not register newly allocated debug objects at all.
Link: http://lkml.kernel.org/r/20181126165343.2339-1-cai@gmx.us Signed-off-by: Qian Cai cai@gmx.us Suggested-by: Catalin Marinas catalin.marinas@arm.com Acked-by: Waiman Long longman@redhat.com Acked-by: Catalin Marinas catalin.marinas@arm.com Cc: Thomas Gleixner tglx@linutronix.de Cc: Yang Shi yang.shi@linux.alibaba.com Cc: Arnd Bergmann arnd@arndb.de Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- lib/debugobjects.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/lib/debugobjects.c b/lib/debugobjects.c index 70935ed91125..14afeeb7d6ef 100644 --- a/lib/debugobjects.c +++ b/lib/debugobjects.c @@ -135,7 +135,6 @@ static void fill_pool(void) if (!new) return;
- kmemleak_ignore(new); raw_spin_lock_irqsave(&pool_lock, flags); hlist_add_head(&new->node, &obj_pool); debug_objects_allocated++; @@ -1128,7 +1127,6 @@ static int __init debug_objects_replace_static_objects(void) obj = kmem_cache_zalloc(obj_cache, GFP_KERNEL); if (!obj) goto free; - kmemleak_ignore(obj); hlist_add_head(&obj->node, &objects); }
@@ -1184,7 +1182,8 @@ void __init debug_objects_mem_init(void)
obj_cache = kmem_cache_create("debug_objects_cache", sizeof (struct debug_obj), 0, - SLAB_DEBUG_OBJECTS, NULL); + SLAB_DEBUG_OBJECTS | SLAB_NOLEAKTRACE, + NULL);
if (!obj_cache || debug_objects_replace_static_objects()) { debug_objects_enabled = 0;
From: Alexey Dobriyan adobriyan@gmail.com
[ Upstream commit dbd4af54745fc0c805217693c807a3928b2d408b ]
https://bugs.linaro.org/show_bug.cgi?id=3782
Turns out arm doesn't permit mapping address 0, so try minimum virtual address instead.
Link: http://lkml.kernel.org/r/20181113165446.GA28157@avx2 Signed-off-by: Alexey Dobriyan adobriyan@gmail.com Reported-by: Rafael David Tinoco rafael.tinoco@linaro.org Tested-by: Rafael David Tinoco rafael.tinoco@linaro.org Acked-by: Cyrill Gorcunov gorcunov@gmail.com Cc: Shuah Khan shuah@kernel.org Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- tools/testing/selftests/proc/proc-self-map-files-002.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/tools/testing/selftests/proc/proc-self-map-files-002.c b/tools/testing/selftests/proc/proc-self-map-files-002.c index 6f1f4a6e1ecb..85744425b08d 100644 --- a/tools/testing/selftests/proc/proc-self-map-files-002.c +++ b/tools/testing/selftests/proc/proc-self-map-files-002.c @@ -13,7 +13,7 @@ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. */ -/* Test readlink /proc/self/map_files/... with address 0. */ +/* Test readlink /proc/self/map_files/... with minimum address. */ #include <errno.h> #include <sys/types.h> #include <sys/stat.h> @@ -47,6 +47,11 @@ static void fail(const char *fmt, unsigned long a, unsigned long b) int main(void) { const unsigned int PAGE_SIZE = sysconf(_SC_PAGESIZE); +#ifdef __arm__ + unsigned long va = 2 * PAGE_SIZE; +#else + unsigned long va = 0; +#endif void *p; int fd; unsigned long a, b; @@ -55,7 +60,7 @@ int main(void) if (fd == -1) return 1;
- p = mmap(NULL, PAGE_SIZE, PROT_NONE, MAP_PRIVATE|MAP_FILE|MAP_FIXED, fd, 0); + p = mmap((void *)va, PAGE_SIZE, PROT_NONE, MAP_PRIVATE|MAP_FILE|MAP_FIXED, fd, 0); if (p == MAP_FAILED) { if (errno == EPERM) return 2;
From: Anders Roxell anders.roxell@linaro.org
[ Upstream commit 903e8ff86753e6f327bb92166a0665e4ecb8e2e7 ]
Since __sanitizer_cov_trace_pc() is marked as notrace, function calls in __sanitizer_cov_trace_pc() shouldn't be traced either. ftrace_graph_caller() gets called for each function that isn't marked 'notrace', like canonicalize_ip(). This is the call trace from a run:
[ 139.644550] ftrace_graph_caller+0x1c/0x24 [ 139.648352] canonicalize_ip+0x18/0x28 [ 139.652313] __sanitizer_cov_trace_pc+0x14/0x58 [ 139.656184] sched_clock+0x34/0x1e8 [ 139.659759] trace_clock_local+0x40/0x88 [ 139.663722] ftrace_push_return_trace+0x8c/0x1f0 [ 139.667767] prepare_ftrace_return+0xa8/0x100 [ 139.671709] ftrace_graph_caller+0x1c/0x24
Rework so that check_kcov_mode() and canonicalize_ip() that are called from __sanitizer_cov_trace_pc() are also marked as notrace.
Link: http://lkml.kernel.org/r/20181128081239.18317-1-anders.roxell@linaro.org Signed-off-by: Arnd Bergmann arnd@arndb.de Signen-off-by: Anders Roxell anders.roxell@linaro.org Co-developed-by: Arnd Bergmann arnd@arndb.de Acked-by: Steven Rostedt (VMware) rostedt@goodmis.org Cc: Dmitry Vyukov dvyukov@google.com Cc: Ingo Molnar mingo@elte.hu Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- kernel/kcov.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/kernel/kcov.c b/kernel/kcov.c index 3ebd09efe72a..97959d7b77e2 100644 --- a/kernel/kcov.c +++ b/kernel/kcov.c @@ -56,7 +56,7 @@ struct kcov { struct task_struct *t; };
-static bool check_kcov_mode(enum kcov_mode needed_mode, struct task_struct *t) +static notrace bool check_kcov_mode(enum kcov_mode needed_mode, struct task_struct *t) { unsigned int mode;
@@ -78,7 +78,7 @@ static bool check_kcov_mode(enum kcov_mode needed_mode, struct task_struct *t) return mode == needed_mode; }
-static unsigned long canonicalize_ip(unsigned long ip) +static notrace unsigned long canonicalize_ip(unsigned long ip) { #ifdef CONFIG_RANDOMIZE_BASE ip -= kaslr_offset();
From: Li Zhijian lizhijian@cn.fujitsu.com
[ Upstream commit 7c0950d455d6ab610d2990a13120f935b75abf2c ]
sys_link() can fail due to the new path already existing. This case ofen occurs when we use a concated initrd, for example:
1) prepare a basic rootfs, it contains a regular files rc.local lizhijian@:~/yocto-tiny-i386-2016-04-22$ cat etc/rc.local #!/bin/sh echo "Running /etc/rc.local..." yocto-tiny-i386-2016-04-22$ find . | sed 's,^./,,' | cpio -o -H newc | gzip -n -9 >../rootfs.cgz
2) create a extra initrd which also includes a etc/rc.local lizhijian@:~/lkp-x86_64/etc$ echo "append initrd" >rc.local lizhijian@:~/lkp/lkp-x86_64/etc$ cat rc.local append initrd lizhijian@:~/lkp/lkp-x86_64/etc$ ln rc.local rc.local.hardlink append initrd lizhijian@:~/lkp/lkp-x86_64/etc$ stat rc.local rc.local.hardlink File: 'rc.local' Size: 14 Blocks: 8 IO Block: 4096 regular file Device: 801h/2049d Inode: 11296086 Links: 2 Access: (0664/-rw-rw-r--) Uid: ( 1002/lizhijian) Gid: ( 1002/lizhijian) Access: 2018-11-15 16:08:28.654464815 +0800 Modify: 2018-11-15 16:07:57.514903210 +0800 Change: 2018-11-15 16:08:24.180228872 +0800 Birth: - File: 'rc.local.hardlink' Size: 14 Blocks: 8 IO Block: 4096 regular file Device: 801h/2049d Inode: 11296086 Links: 2 Access: (0664/-rw-rw-r--) Uid: ( 1002/lizhijian) Gid: ( 1002/lizhijian) Access: 2018-11-15 16:08:28.654464815 +0800 Modify: 2018-11-15 16:07:57.514903210 +0800 Change: 2018-11-15 16:08:24.180228872 +0800 Birth: -
lizhijian@:~/lkp/lkp-x86_64$ find . | sed 's,^./,,' | cpio -o -H newc | gzip -n -9 >../rc-local.cgz lizhijian@:~/lkp/lkp-x86_64$ gzip -dc ../rc-local.cgz | cpio -t . etc etc/rc.local.hardlink <<< it will be extracted first at this initrd etc/rc.local
3) concate 2 initrds and boot lizhijian@:~/lkp$ cat rootfs.cgz rc-local.cgz >concate-initrd.cgz lizhijian@:~/lkp$ qemu-system-x86_64 -nographic -enable-kvm -cpu host -smp 1 -m 1024 -kernel ~/lkp/linux/arch/x86/boot/bzImage -append "console=ttyS0 earlyprint=ttyS0 ignore_loglevel" -initrd ./concate-initr.cgz -serial stdio -nodefaults
In this case, sys_link(2) will fail and return -EEXIST, so we can only get the rc.local at rootfs.cgz instead of rc-local.cgz
[akpm@linux-foundation.org: move code to avoid forward declaration] Link: http://lkml.kernel.org/r/1542352368-13299-1-git-send-email-lizhijian@cn.fuji... Signed-off-by: Li Zhijian lizhijian@cn.fujitsu.com Cc: Philip Li philip.li@intel.com Cc: Dominik Brodowski linux@dominikbrodowski.net Cc: Li Zhijian zhijianx.li@intel.com Cc: Al Viro viro@zeniv.linux.org.uk Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- init/initramfs.c | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-)
diff --git a/init/initramfs.c b/init/initramfs.c index 640557788026..f6f4a1e4cd54 100644 --- a/init/initramfs.c +++ b/init/initramfs.c @@ -291,16 +291,6 @@ static int __init do_reset(void) return 1; }
-static int __init maybe_link(void) -{ - if (nlink >= 2) { - char *old = find_link(major, minor, ino, mode, collected); - if (old) - return (ksys_link(old, collected) < 0) ? -1 : 1; - } - return 0; -} - static void __init clean_path(char *path, umode_t fmode) { struct kstat st; @@ -313,6 +303,18 @@ static void __init clean_path(char *path, umode_t fmode) } }
+static int __init maybe_link(void) +{ + if (nlink >= 2) { + char *old = find_link(major, minor, ino, mode, collected); + if (old) { + clean_path(collected, 0); + return (ksys_link(old, collected) < 0) ? -1 : 1; + } + } + return 0; +} + static __initdata int wfd;
static int __init do_name(void)
From: Pan Bian bianpan2016@163.com
[ Upstream commit 164f7e586739d07eb56af6f6d66acebb11f315c8 ]
ocfs2_get_dentry() calls iput(inode) to drop the reference count of inode, and if the reference count hits 0, inode is freed. However, in this function, it then reads inode->i_generation, which may result in a use after free bug. Move the put operation later.
Link: http://lkml.kernel.org/r/1543109237-110227-1-git-send-email-bianpan2016@163.... Fixes: 781f200cb7a("ocfs2: Remove masklog ML_EXPORT.") Signed-off-by: Pan Bian bianpan2016@163.com Reviewed-by: Andrew Morton akpm@linux-foundation.org Cc: Mark Fasheh mark@fasheh.com Cc: Joel Becker jlbec@evilplan.org Cc: Junxiao Bi junxiao.bi@oracle.com Cc: Joseph Qi jiangqi903@gmail.com Cc: Changwei Ge ge.changwei@h3c.com Signed-off-by: Andrew Morton akpm@linux-foundation.org Signed-off-by: Linus Torvalds torvalds@linux-foundation.org Signed-off-by: Sasha Levin sashal@kernel.org --- fs/ocfs2/export.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/fs/ocfs2/export.c b/fs/ocfs2/export.c index 9f88188060db..4bf8d5854b27 100644 --- a/fs/ocfs2/export.c +++ b/fs/ocfs2/export.c @@ -125,10 +125,10 @@ static struct dentry *ocfs2_get_dentry(struct super_block *sb,
check_gen: if (handle->ih_generation != inode->i_generation) { - iput(inode); trace_ocfs2_get_dentry_generation((unsigned long long)blkno, handle->ih_generation, inode->i_generation); + iput(inode); result = ERR_PTR(-ESTALE); goto bail; }
linux-stable-mirror@lists.linaro.org
-
David Sterba -
Joe Perches -
Kees Cook -
Mark Brown -
Naresh Kamboju -
Pierre-Louis Bossart -
Sasha Levin