Hi,
[This is an automated email]
This commit has been processed because it contains a "Fixes:" tag, fixing commit: 1a7fecb766c8 ath10k: reset chip before reading chip_id in probe.
The bot has tested the following trees: v5.2.13, v4.19.71, v4.14.142, v4.9.191, v4.4.191.
v5.2.13: Failed to apply! Possible dependencies: 6d084ac27ab4 ("ath10k: initialise struct ath10k_bus params to zero")
v4.19.71: Failed to apply! Possible dependencies: 31324d17976e ("ath10k: support extended board data download for dual-band QCA9984") 5849ed48d226 ("ath10k: refactoring needed for extended board data download") 6d084ac27ab4 ("ath10k: initialise struct ath10k_bus params to zero") 7c2dd6154fc2 ("ath10k: add device type enum to ath10k_bus_params") ba94c753ccb4 ("ath10k: add QMI message handshake for wcn3990 client") c0d8d565787c ("ath10k: add struct ath10k_bus_params") de8781d7e74d ("ath10k: disable interface pause wow config for integrated chipset") f1908735f141 ("ath10k: allow ATH10K_SNOC with COMPILE_TEST")
v4.14.142: Failed to apply! Possible dependencies: 0fa4fbe9b8cf ("ath10k: add hif power-up/power-down methods") 17f5559e0da5 ("ath10k: platform driver for WCN3990 SNOC WLAN module") 2a1e1ad3fd37 ("ath10k: Add support for 64 bit ce descriptor") 50c51f394e68 ("ath10k: do not mix spaces and tabs in Kconfig") 5dac5f3772f6 ("ath10k: Use dma_addr_t for ce buffers to support 64bit target") 6d084ac27ab4 ("ath10k: initialise struct ath10k_bus params to zero") 7f9befbb555d ("ath10k: move pktlog_filter out of ath10k_debug") 84efe7f6ebc5 ("ath10k: map HTC services to tx/rx pipes for wcn3990") a0aedd6e0b57 ("ath10k: build ce layer in ath10k core module") a6a793f98786 ("ath10k: vote for hardware resources for WCN3990") a6e149a9ff03 ("ath10k: add hif start/stop methods for wcn3990 snoc layer") ba94c753ccb4 ("ath10k: add QMI message handshake for wcn3990 client") c0d8d565787c ("ath10k: add struct ath10k_bus_params") c963a683e701 ("ath10k: add resource init and deinit for WCN3990") d390509bdf50 ("ath10k: add hif tx methods for wcn3990") dafa42036012 ("ath10k: use 64-bit crash dump timestamps") e2fcf60c6fe8 ("ath10k: detach coredump.c from debug.c") f1908735f141 ("ath10k: allow ATH10K_SNOC with COMPILE_TEST") f25b9f285a0e ("ath10k: refactor firmware crashdump code to coredump.c")
v4.9.191: Failed to apply! Possible dependencies: 0fa4fbe9b8cf ("ath10k: add hif power-up/power-down methods") 17f5559e0da5 ("ath10k: platform driver for WCN3990 SNOC WLAN module") 4db66499df91 ("ath10k: add initial USB support") 50c51f394e68 ("ath10k: do not mix spaces and tabs in Kconfig") 5524ddd4c1f1 ("ath10k: select WANT_DEV_COREDUMP") 6d084ac27ab4 ("ath10k: initialise struct ath10k_bus params to zero") 84efe7f6ebc5 ("ath10k: map HTC services to tx/rx pipes for wcn3990") a0aedd6e0b57 ("ath10k: build ce layer in ath10k core module") a6a793f98786 ("ath10k: vote for hardware resources for WCN3990") a6e149a9ff03 ("ath10k: add hif start/stop methods for wcn3990 snoc layer") ba94c753ccb4 ("ath10k: add QMI message handshake for wcn3990 client") c0d8d565787c ("ath10k: add struct ath10k_bus_params") c963a683e701 ("ath10k: add resource init and deinit for WCN3990") cec17c382140 ("ath10k: add per peer htt tx stats support for 10.4") d390509bdf50 ("ath10k: add hif tx methods for wcn3990") d96db25d2025 ("ath10k: add initial SDIO support") f1908735f141 ("ath10k: allow ATH10K_SNOC with COMPILE_TEST")
v4.4.191: Failed to apply! Possible dependencies: 0b523ced9a3c ("ath10k: add basic skeleton to support ahb") 0d87c9208a17 ("ath10k: expose hif ops for ahb") 133df0f849bc ("ath10k: add chip and bus halt logic in ahb") 14854bfd9daa ("ath10k: add reset ctrl related functions in ahb") 1c44fcb9234c ("ath10k: include irq related functions in ahb") 4ddb3299aa49 ("ath10k: make ath10k_pci_read32/write32() ops more generic") 6d084ac27ab4 ("ath10k: initialise struct ath10k_bus params to zero") 704dc4e36769 ("ath10k: add resource init and deinit in ahb") 7f8e79cdc253 ("ath10k: add helper functions in ahb.c for reg rd/wr") 8beff219c528 ("ath10k: add clock ctrl related functions in ahb") f52f517189de ("ath10k: make some of ath10k_pci_* func reusable")
NOTE: The patch will not be queued to stable trees until it is upstream.
How should we proceed with this patch?
-- Thanks, Sasha
Hello,
On Saturday, September 7, 2019 11:43:58 PM CEST Sasha Levin wrote:
This commit has been processed because it contains a "Fixes:" tag, fixing commit: 1a7fecb766c8 ath10k: reset chip before reading chip_id in probe.
The bot has tested the following trees: v5.2.13, v4.19.71, v4.14.142, v4.9.191, v4.4.191.
v5.2.13: Failed to apply! Possible dependencies: 6d084ac27ab4 ("ath10k: initialise struct ath10k_bus params to zero")
The bot is right. Either add that patch or remove the "= {};" from the patch that was sent to linux-wireless (based on "wireless-testing.git").
Alternatively, I've also added patches (as file attachments, I did this in the hopes of fooling patchwork and the bots at least a bit... as well as parking the patches for later). That said, I think this will go horribly wrong because of this response. Since It has been a long time since I needed a multi-version patch so I'm sorry for not being up-to-date with the latest for-stable meta.
v4.19.71: Failed to apply! Possible dependencies: 31324d17976e ("ath10k: support extended board data download for dual-band QCA9984") [...] too much [...]: [...]
NOTE: The patch will not be queued to stable trees until it is upstream.
How should we proceed with this patch?
You could let loose your ci-bot on the attached patches and see if they would do the trick. I'm very optimistic that this will need some more time though. So, "let's cross that bridge whenever we get there."
Cheers, Christian
Hi Kalle
According to this very old post http://lists.infradead.org/pipermail/ath10k/2013-July/000021.html seems like you've been misinformed on amount of these cards that were put out in the market.
At least digipart only have >40000 units in stocks https://www.digipart.com/part/QCA9880-AR1A and other retailers probably few thousands more.
With that large amount of cards I think it is justified to request firmware support for the chip. And probably a lot easier to make few firmware modifications than go hacking a bunch of API calls so it works with v2 firmware.
I made some modifications to driver and it differentiates properly between v1 and v2 card, this is the current status bootlog:
[ 0.000000] Linux version 4.19.57 (whtw46ww4@I5576) (gcc version 7.4.0 (OpenWrt GCC 7.4.0 r10563-db8e08a)) #0 Sun Jul 21 09:26:06 2019 [ 0.000000] bootconsole [early0] enabled [ 0.000000] CPU0 revision is: 00019750 (MIPS 74Kc) [ 0.000000] MIPS: machine is TP-Link Archer C7 v1 [ 0.000000] SoC: Qualcomm Atheros QCA9558 ver 1 rev 0 [ 0.000000] Determined physical RAM map: [ 0.000000] memory: 08000000 @ 00000000 (usable) [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] Initrd not found or empty - disabling initrd [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff] [ 0.000000] On node 0 totalpages: 32768 [ 0.000000] Normal zone: 288 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 32768 pages, LIFO batch:7 [ 0.000000] random: get_random_bytes called from start_kernel+0x98/0x51c with crng_init=0 [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32480 [ 0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2 ignore_loglevel [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.000000] Writing ErrCtl register=00000000 [ 0.000000] Readback ErrCtl register=00000000 [ 0.000000] Memory: 118256K/131072K available (4518K kernel code, 269K rwdata, 1104K rodata, 4980K init, 215K bss, 12816K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS: 51 [ 0.000000] CPU clock: 720.000 MHz [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 5309056796 ns [ 0.000007] sched_clock: 32 bits at 360MHz, resolution 2ns, wraps every 5965232126ns [ 0.008691] Calibrating delay loop... 358.80 BogoMIPS (lpj=1794048) [ 0.075695] pid_max: default: 32768 minimum: 301 [ 0.081040] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.088408] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.100532] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.111534] futex hash table entries: 256 (order: -1, 3072 bytes) [ 0.118449] pinctrl core: initialized pinctrl subsystem [ 0.125072] NET: Registered protocol family 16 [ 0.137497] PCI host bridge /ahb/pcie-controller@18250000 ranges: [ 0.144293] MEM 0x0000000012000000..0x0000000013ffffff [ 0.150153] IO 0x0000000000000001..0x0000000000000001 [ 0.173135] PCI host bridge to bus 0000:00 [ 0.177708] pci_bus 0000:00: root bus resource [mem 0x12000000-0x13ffffff] [ 0.185419] pci_bus 0000:00: root bus resource [io 0x0001] [ 0.191622] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0] [ 0.199195] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff] [ 0.208053] pci 0000:00:00.0: [168c:003c] type 00 class 0x028000 [ 0.214800] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit] [ 0.222408] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref] [ 0.229953] pci 0000:00:00.0: supports D1 D2 [ 0.235724] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00 [ 0.243140] pci 0000:00:00.0: BAR 0: assigned [mem 0x12000000-0x121fffff 64bit] [ 0.251297] pci 0000:00:00.0: BAR 6: assigned [mem 0x12200000-0x1220ffff pref] [ 0.262142] clocksource: Switched to clocksource MIPS [ 0.304897] NET: Registered protocol family 2 [ 0.310448] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes) [ 0.319090] TCP established hash table entries: 1024 (order: 0, 4096 bytes) [ 0.326880] TCP bind hash table entries: 1024 (order: 0, 4096 bytes) [ 0.333978] TCP: Hash tables configured (established 1024 bind 1024) [ 0.341161] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.347721] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.355054] NET: Registered protocol family 1 [ 0.359955] PCI: CLS 0 bytes, default 32 [ 2.602152] random: fast init done [ 5.128772] Crashlog allocated RAM at address 0x3f00000 [ 5.135884] workingset: timestamp_bits=14 max_order=15 bucket_order=1 [ 5.148697] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 5.155250] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc. [ 5.232790] io scheduler noop registered [ 5.237160] io scheduler deadline registered (default) [ 5.243159] ar7200-usb-phy 18030000.usb-phy0: phy reset is missing [ 5.250094] ar7200-usb-phy 18030010.usb-phy1: phy reset is missing [ 5.258595] pinctrl-single 1804002c.pinmux: 544 pins, size 68 [ 5.265572] gpio-export gpio-export: 2 gpio(s) exported [ 5.272126] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled [ 5.279862] console [ttyS0] disabled [ 5.283922] 18020000.uart: ttyS0 at MMIO 0x18020000 (irq = 9, base_baud = 2500000) is a 16550A [ 5.293553] console [ttyS0] enabled [ 5.300959] bootconsole [early0] disabled [ 5.327081] m25p80 spi0.0: s25fl064k (8192 Kbytes) [ 5.331977] 3 fixed-partitions partitions found on MTD device spi0.0 [ 5.338440] Creating 3 MTD partitions on "spi0.0": [ 5.343320] 0x000000000000-0x000000020000 : "u-boot" [ 5.349085] 0x000000020000-0x0000007f0000 : "firmware" [ 5.356806] 2 tplink-fw partitions found on MTD device firmware [ 5.362861] Creating 2 MTD partitions on "firmware": [ 5.367902] 0x000000000000-0x000000100000 : "kernel" [ 5.373680] 0x000000100000-0x0000007d0000 : "rootfs" [ 5.379320] mtd: device 3 (rootfs) set to be root filesystem [ 5.386376] mtdsplit: no squashfs found in "rootfs" [ 5.391368] 0x0000007f0000-0x000000800000 : "art" [ 5.397879] libphy: Fixed MDIO Bus: probed [ 5.753920] libphy: ag71xx_mdio: probed [ 5.778627] switch0: Atheros AR8327 rev. 4 switch registered on mdio-bus.0 [ 6.431314] ag71xx 19000000.eth: connected to PHY at mdio-bus.0:00 [uid=004dd034, driver=Atheros AR8216/AR8236/AR8316] [ 6.442773] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: rgmii [ 6.801780] ag71xx 1a000000.eth: connected to PHY at fixed-0:00 [uid=00000000, driver=Generic PHY] [ 6.811442] eth1: Atheros AG71xx at 0xba000000, irq 5, mode: sgmii [ 6.820003] NET: Registered protocol family 10 [ 6.829252] Segment Routing with IPv6 [ 6.833117] NET: Registered protocol family 17 [ 6.837701] 8021q: 802.1Q VLAN Support v1.8 [ 6.862923] Freeing unused kernel memory: 4980K [ 6.867527] This architecture does not have kernel memory protection. [ 6.874085] Run /init as init process [ 6.889985] init: Console is alive [ 6.893771] init: - watchdog - [ 6.915582] kmodloader: loading kernel modules from /etc/modules-boot.d/* [ 6.931970] usbcore: registered new interface driver usbfs [ 6.937657] usbcore: registered new interface driver hub [ 6.943149] usbcore: registered new device driver usb [ 6.953795] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 6.961871] ehci-platform: EHCI generic platform driver [ 6.967460] ehci-platform 1b000000.usb: EHCI Host Controller [ 6.973270] ehci-platform 1b000000.usb: new USB bus registered, assigned bus number 1 [ 6.981281] ehci-platform 1b000000.usb: irq 14, io mem 0x1b000000 [ 7.012216] ehci-platform 1b000000.usb: USB 2.0 started, EHCI 1.00 [ 7.019257] hub 1-0:1.0: USB hub found [ 7.023457] hub 1-0:1.0: 1 port detected [ 7.027987] ehci-platform 1b400000.usb: EHCI Host Controller [ 7.033824] ehci-platform 1b400000.usb: new USB bus registered, assigned bus number 2 [ 7.041847] ehci-platform 1b400000.usb: irq 15, io mem 0x1b400000 [ 7.072165] ehci-platform 1b400000.usb: USB 2.0 started, EHCI 1.00 [ 7.079206] hub 2-0:1.0: USB hub found [ 7.083403] hub 2-0:1.0: 1 port detected [ 7.088430] kmodloader: done loading kernel modules from /etc/modules-boot.d/* [ 7.106193] init: - preinit - [ 7.291223] random: jshn: uninitialized urandom read (4 bytes read) [ 7.369076] random: jshn: uninitialized urandom read (4 bytes read) [ 7.538353] random: jshn: uninitialized urandom read (4 bytes read) [ 8.515044] urandom_read: 4 callbacks suppressed [ 8.515051] random: procd: uninitialized urandom read (4 bytes read) [ 8.531594] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 8.537651] IPv6: ADDRCONF(NETDEV_UP): eth1.1: link is not ready [ 9.573291] eth1: link up (1000Mbps/Full duplex) [ 9.577999] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 9.584709] IPv6: ADDRCONF(NETDEV_CHANGE): eth1.1: link becomes ready [ 11.669504] eth1: link down [ 11.688655] procd: - early - [ 11.691672] procd: - watchdog - [ 12.239816] procd: - watchdog - [ 12.243288] procd: - ubus - [ 12.252031] random: ubusd: uninitialized urandom read (4 bytes read) [ 12.296521] random: ubusd: uninitialized urandom read (4 bytes read) [ 12.304295] procd: - init - [ 12.714303] kmodloader: loading kernel modules from /etc/modules.d/* [ 12.730578] urngd: v1.0.0 started. [ 12.756700] Loading modules backported from Linux version v5.2-rc7-0-g6fbc7275c7a9 [ 12.764427] Backport generated by backports.git v5.2-rc7-1-0-g021a6ba1 [ 12.820407] xt_time: kernel timezone is -0000 [ 12.982093] PPP generic driver version 2.4.2 [ 12.992983] NET: Registered protocol family 24 [ 13.002433] random: crng init done [ 13.038820] ath10k_pci 0000:00:00.0: pci probe 168c:003c 168c:3223 [ 13.045528] ath10k_pci 0000:00:00.0: enabling device (0000 -> 0002) [ 13.051917] ath10k_pci 0000:00:00.0: boot pci_mem 0x1cb18953 [ 13.060199] ath10k_pci 0000:00:00.0: pci irq legacy oper_irq_mode 1 irq_mode 0 reset_mode 0 [ 13.068700] ath10k_pci 0000:00:00.0: boot qca99x0 chip reset [ 13.074453] ath10k_pci 0000:00:00.0: boot cold reset [ 13.079495] ath10k_pci 0000:00:00.0: boot target and PCIe out of reset [ 13.086124] ath10k_pci 0000:00:00.0: boot cold reset complete [ 13.091955] ath10k_pci 0000:00:00.0: boot waiting target to initialise [ 13.098589] ath10k_pci 0000:00:00.0: boot target indicator 0 [ 13.114327] ath10k_pci 0000:00:00.0: boot target indicator 0 [ 13.130053] ath10k_pci 0000:00:00.0: boot target indicator 0 [ 13.145790] ath10k_pci 0000:00:00.0: boot target indicator 0 [ 13.161521] ath10k_pci 0000:00:00.0: boot target indicator 0 [ 13.177252] ath10k_pci 0000:00:00.0: boot target indicator 0 [ 13.192988] ath10k_pci 0000:00:00.0: boot target indicator 0 [ 13.208717] ath10k_pci 0000:00:00.0: boot target indicator 0 [ 13.224458] ath10k_pci 0000:00:00.0: boot target indicator 0 [ 13.240183] ath10k_pci 0000:00:00.0: boot target indicator 0 [ 13.255914] ath10k_pci 0000:00:00.0: boot target indicator 0 [ 13.271643] ath10k_pci 0000:00:00.0: boot target indicator 0 [ 13.287376] ath10k_pci 0000:00:00.0: boot target indicator 0 [ 13.303112] ath10k_pci 0000:00:00.0: boot target indicator 0 [ 13.318842] ath10k_pci 0000:00:00.0: boot target indicator 2 [ 13.324613] ath10k_pci 0000:00:00.0: boot target initialised [ 13.330355] ath10k_pci 0000:00:00.0: boot qca99x0 chip reset complete (cold) [ 13.337552] ath10k_pci 0000:00:00.0: boot hif power up [ 13.342788] ath10k_pci 0000:00:00.0: boot qca99x0 chip reset [ 13.348528] ath10k_pci 0000:00:00.0: boot cold reset [ 13.353584] ath10k_pci 0000:00:00.0: boot target and PCIe out of reset [ 13.360205] ath10k_pci 0000:00:00.0: boot cold reset complete [ 13.366043] ath10k_pci 0000:00:00.0: boot waiting target to initialise [ 13.372678] ath10k_pci 0000:00:00.0: boot target indicator 2 [ 13.378428] ath10k_pci 0000:00:00.0: boot target initialised [ 13.384181] ath10k_pci 0000:00:00.0: boot qca99x0 chip reset complete (cold) [ 13.391374] ath10k_pci 0000:00:00.0: boot init ce src ring id 0 entries 16 base_addr 2ceb9a7e [ 13.400070] ath10k_pci 0000:00:00.0: boot ce dest ring id 1 entries 128 base_addr 289c278c [ 13.408497] ath10k_pci 0000:00:00.0: boot ce dest ring id 2 entries 64 base_addr c0e40e4c [ 13.416844] ath10k_pci 0000:00:00.0: boot init ce src ring id 3 entries 32 base_addr 139e13fb [ 13.425772] ath10k_pci 0000:00:00.0: boot init ce src ring id 4 entries 8192 base_addr 42800924 [ 13.434638] ath10k_pci 0000:00:00.0: boot ce dest ring id 5 entries 128 base_addr 230402d2 [ 13.443068] ath10k_pci 0000:00:00.0: boot init ce src ring id 7 entries 2 base_addr 11334358 [ 13.451652] ath10k_pci 0000:00:00.0: boot ce dest ring id 7 entries 2 base_addr 70d67374 [ 13.460652] ath10k_pci 0000:00:00.0: bmi get target info [ 13.466143] ath10k_pci 0000:00:00.0: Hardware name qca988x hw1.0 version 0x4000002c [ 13.563795] firmware ath10k!pre-cal-pci-0000:00:00.0.bin: firmware_loading_store: map pages failed [ 13.573090] ath10k_pci 0000:00:00.0: boot fw request 'ath10k/pre-cal-pci-0000:00:00.0.bin': -11 [ 13.761310] firmware ath10k!cal-pci-0000:00:00.0.bin: firmware_loading_store: map pages failed [ 13.770242] ath10k_pci 0000:00:00.0: boot fw request 'ath10k/cal-pci-0000:00:00.0.bin': -11 [ 13.778749] ath10k_pci 0000:00:00.0: trying fw api 6 [ 13.962772] firmware ath10k!QCA988X!hw2.0!firmware-6.bin: firmware_loading_store: map pages failed [ 13.972018] ath10k_pci 0000:00:00.0: boot fw request 'ath10k/QCA988X/hw2.0/firmware-6.bin': -11 [ 13.980888] ath10k_pci 0000:00:00.0: trying fw api 5 [ 14.004273] ath10k_pci 0000:00:00.0: boot fw request 'ath10k/QCA988X/hw2.0/firmware-5.bin': 0 [ 14.012975] ath10k_pci 0000:00:00.0: found fw version 10.2.4-1.0-00043 [ 14.019600] ath10k_pci 0000:00:00.0: found fw timestamp 1541656652 [ 14.025891] ath10k_pci 0000:00:00.0: found otp image ie (7221 B) [ 14.031981] ath10k_pci 0000:00:00.0: found fw image ie (241515 B) [ 14.038172] ath10k_pci 0000:00:00.0: found firmware features ie (3 B) [ 14.044715] ath10k_pci 0000:00:00.0: Enabling feature bit: 3 [ 14.050452] ath10k_pci 0000:00:00.0: Enabling feature bit: 10 [ 14.056292] ath10k_pci 0000:00:00.0: Enabling feature bit: 12 [ 14.062121] ath10k_pci 0000:00:00.0: Enabling feature bit: 16 [ 14.067957] ath10k_pci 0000:00:00.0: features [ 14.072396] ath10k_pci 0000:00:00.0: 00000000: 00 01 14 08 .... [ 14.081658] ath10k_pci 0000:00:00.0: found fw ie wmi op version 5 [ 14.087848] ath10k_pci 0000:00:00.0: found fw ie htt op version 2 [ 14.094046] ath10k_pci 0000:00:00.0: using fw api 5 [ 14.099004] ath10k_pci 0000:00:00.0: qca988x hw1.0 target 0x4000002c chip_id 0x043200ff sub 168c:3223 [ 14.108373] ath10k_pci 0000:00:00.0: kconfig debug 1 debugfs 1 tracing 1 dfs 1 testmode 1 [ 14.121519] ath10k_pci 0000:00:00.0: firmware ver 10.2.4-1.0-00043 api 5 features no-p2p,raw-mode,mfp,allows-mesh-bcast crc32 ed0aafd8 [ 14.133799] ath10k_pci 0000:00:00.0: boot did not find a pre calibration file, try DT next: -11 [ 14.142638] ath10k_pci 0000:00:00.0: unable to load pre cal data from DT: -2 [ 14.149787] ath10k_pci 0000:00:00.0: could not load pre cal data: -2 [ 14.156243] ath10k_pci 0000:00:00.0: boot upload otp to 0x1234 len 7221 for board id [ 14.164111] ath10k_pci 0000:00:00.0: bmi fast download address 0x1234 buffer 0x3ca910fe length 7221 [ 14.173297] ath10k_pci 0000:00:00.0: bmi lz stream start address 0x1234 [ 14.253843] ath10k_pci 0000:00:00.0: bmi lz data buffer 0x3ca910fe length 7220 [ 14.285961] ath10k_pci 0000:00:00.0: bmi lz data buffer 0x9fc59964 length 4 [ 14.293057] ath10k_pci 0000:00:00.0: bmi lz stream start address 0x0 [ 14.299517] ath10k_pci 0000:00:00.0: bmi execute address 0x1234 param 0x10 [ 14.306655] ath10k_pci 0000:00:00.0: bmi execute result 0x10 [ 14.312413] ath10k_pci 0000:00:00.0: boot get otp board id result 0x00000010 board_id 0 chip_id 0 ext_bid_support 0 [ 14.323010] ath10k_pci 0000:00:00.0: board id does not exist in otp, ignore it [ 14.330335] ath10k_pci 0000:00:00.0: SMBIOS bdf variant name not set. [ 14.336877] ath10k_pci 0000:00:00.0: DT bdf variant name not set. [ 14.343077] ath10k_pci 0000:00:00.0: boot using board name 'bus=pci,vendor=168c,device=003c,subsystem-vendor=168c,subsystem-device=3223' [ 14.355522] ath10k_pci 0000:00:00.0: boot using board name 'bus=pci,vendor=168c,device=003c,subsystem-vendor=168c,subsystem-device=3223' [ 14.458077] firmware ath10k!QCA988X!hw2.0!board-2.bin: firmware_loading_store: map pages failed [ 14.467099] ath10k_pci 0000:00:00.0: boot fw request 'ath10k/QCA988X/hw2.0/board-2.bin': -11 [ 14.482333] ath10k_pci 0000:00:00.0: boot fw request 'ath10k/QCA988X/hw2.0/board.bin': 0 [ 14.490551] ath10k_pci 0000:00:00.0: using board api 1 [ 14.495851] ath10k_pci 0000:00:00.0: board_file api 1 bmi_id N/A crc32 bebc7c08 [ 14.503280] ath10k_pci 0000:00:00.0: bmi start [ 14.507790] ath10k_pci 0000:00:00.0: bmi write address 0x400800 length 4 [ 14.546287] ath10k_pci 0000:00:00.0: bmi read address 0x400810 length 4 [ 14.557471] ath10k_pci 0000:00:00.0: bmi write address 0x400810 length 4 [ 14.572212] ath10k_pci 0000:00:00.0: bmi write address 0x400844 length 4 [ 14.592214] ath10k_pci 0000:00:00.0: bmi write address 0x400904 length 4 [ 14.602208] ath10k_pci 0000:00:00.0: bmi write address 0x4008bc length 4 [ 14.622213] ath10k_pci 0000:00:00.0: boot did not find a pre calibration file, try DT next: -11 [ 14.631043] ath10k_pci 0000:00:00.0: unable to load pre cal data from DT: -2 [ 14.638205] ath10k_pci 0000:00:00.0: failed to load pre cal data: -2 [ 14.644657] ath10k_pci 0000:00:00.0: pre cal download procedure failed, try cal file: -2 [ 14.652880] ath10k_pci 0000:00:00.0: boot did not find a calibration file, try DT next: -11 [ 14.661349] ath10k_pci 0000:00:00.0: boot did not find DT entry, try target EEPROM next: -2 [ 14.669830] ath10k_pci 0000:00:00.0: boot did not find target EEPROM entry, try OTP next: -122 [ 14.678578] ath10k_pci 0000:00:00.0: bmi read address 0x4008ac length 4 [ 14.695286] ath10k_pci 0000:00:00.0: boot push board extended data addr 0x0 [ 14.702401] ath10k_pci 0000:00:00.0: bmi read address 0x400854 length 4 [ 14.709186] ath10k_pci 0000:00:00.0: bmi write address 0x401cb0 length 2116 [ 14.719947] ath10k_pci 0000:00:00.0: bmi write address 0x400858 length 4 [ 14.726782] ath10k_pci 0000:00:00.0: boot upload otp to 0x1234 len 7221 [ 14.733509] ath10k_pci 0000:00:00.0: bmi fast download address 0x1234 buffer 0x3ca910fe length 7221 [ 14.742691] ath10k_pci 0000:00:00.0: bmi lz stream start address 0x1234 [ 14.749419] ath10k_pci 0000:00:00.0: bmi lz data buffer 0x3ca910fe length 7220 [ 14.781532] ath10k_pci 0000:00:00.0: bmi lz data buffer 0x51c0dfb6 length 4 [ 14.788635] ath10k_pci 0000:00:00.0: bmi lz stream start address 0x0 [ 14.795111] ath10k_pci 0000:00:00.0: bmi execute address 0x1234 param 0x0 [ 14.802126] ath10k_pci 0000:00:00.0: bmi execute result 0x0 [ 14.807791] ath10k_pci 0000:00:00.0: boot otp execute result 0 [ 14.813716] ath10k_pci 0000:00:00.0: boot using calibration mode otp [ 14.820166] ath10k_pci 0000:00:00.0: boot uploading firmware image c21dc34c len 241515 [ 14.828219] ath10k_pci 0000:00:00.0: bmi fast download address 0x1234 buffer 0xc21dc34c length 241515 [ 14.837583] ath10k_pci 0000:00:00.0: bmi lz stream start address 0x1234 [ 14.844343] ath10k_pci 0000:00:00.0: bmi lz data buffer 0xc21dc34c length 241512 [ 15.865780] ath10k_pci 0000:00:00.0: bmi lz data buffer 0x9fc59964 length 4 [ 15.872878] ath10k_pci 0000:00:00.0: bmi lz stream start address 0x0 [ 15.879337] ath10k_pci 0000:00:00.0: bmi write address 0x400814 length 4 [ 15.886185] ath10k_pci 0000:00:00.0: pci hif map service [ 15.891585] ath10k_pci 0000:00:00.0: boot htc service 'Control' ul pipe 0 dl pipe 1 eid 0 ready [ 15.900428] ath10k_pci 0000:00:00.0: boot htc service 'Control' eid 0 TX flow control disabled [ 15.909175] ath10k_pci 0000:00:00.0: bmi done [ 15.913627] ath10k_pci 0000:00:00.0: htt tx max num pending tx 1424 [ 15.920206] ath10k_pci 0000:00:00.0: htt rx ring size 512 fill_level 255 [ 15.927035] ath10k_pci 0000:00:00.0: boot hif start [ 17.012155] ath10k_pci 0000:00:00.0: failed to receive control response completion, polling.. [ 17.020805] ath10k_pci 0000:00:00.0: pci hif send complete check [ 17.026909] ath10k_pci 0000:00:00.0: Copy Engine register dump: [ 17.032936] ath10k_pci 0000:00:00.0: [00]: 0x00057400 10 10 11 10 [ 17.039476] ath10k_pci 0000:00:00.0: [01]: 0x00057800 6 6 5 6 [ 17.046029] ath10k_pci 0000:00:00.0: [02]: 0x00057c00 0 0 63 0 [ 17.052581] ath10k_pci 0000:00:00.0: [03]: 0x00058000 0 0 0 0 [ 17.059117] ath10k_pci 0000:00:00.0: [04]: 0x00058400 0 0 0 0 [ 17.065671] ath10k_pci 0000:00:00.0: [05]: 0x00058800 0 0 0 0 [ 17.072224] ath10k_pci 0000:00:00.0: [06]: 0x00058c00 0 0 0 0 [ 17.078760] ath10k_pci 0000:00:00.0: [07]: 0x00059000 1 1 1 1 [ 17.085320] ath10k_pci 0000:00:00.0: pci hif send complete check [ 17.091414] ath10k_pci 0000:00:00.0: Copy Engine register dump: [ 17.097440] ath10k_pci 0000:00:00.0: [00]: 0x00057400 10 10 11 10 [ 17.103994] ath10k_pci 0000:00:00.0: [01]: 0x00057800 6 6 5 6 [ 17.110538] ath10k_pci 0000:00:00.0: [02]: 0x00057c00 0 0 63 0 [ 17.117087] ath10k_pci 0000:00:00.0: [03]: 0x00058000 0 0 0 0 [ 17.123640] ath10k_pci 0000:00:00.0: [04]: 0x00058400 0 0 0 0 [ 17.130178] ath10k_pci 0000:00:00.0: [05]: 0x00058800 0 0 0 0 [ 17.136730] ath10k_pci 0000:00:00.0: [06]: 0x00058c00 0 0 0 0 [ 17.143284] ath10k_pci 0000:00:00.0: [07]: 0x00059000 1 1 1 1 [ 17.149842] ath10k_pci 0000:00:00.0: pci hif send complete check [ 17.155950] ath10k_pci 0000:00:00.0: Copy Engine register dump: [ 17.161967] ath10k_pci 0000:00:00.0: [00]: 0x00057400 10 10 11 10 [ 17.168516] ath10k_pci 0000:00:00.0: [01]: 0x00057800 6 6 5 6 [ 17.175068] ath10k_pci 0000:00:00.0: [02]: 0x00057c00 0 0 63 0 [ 17.181606] ath10k_pci 0000:00:00.0: [03]: 0x00058000 0 0 0 0 [ 17.188157] ath10k_pci 0000:00:00.0: [04]: 0x00058400 0 0 0 0 [ 17.194711] ath10k_pci 0000:00:00.0: [05]: 0x00058800 0 0 0 0 [ 17.201246] ath10k_pci 0000:00:00.0: [06]: 0x00058c00 0 0 0 0 [ 17.207802] ath10k_pci 0000:00:00.0: [07]: 0x00059000 1 1 1 1 [ 17.214355] ath10k_pci 0000:00:00.0: pci hif send complete check [ 17.220448] ath10k_pci 0000:00:00.0: Copy Engine register dump: [ 17.226478] ath10k_pci 0000:00:00.0: [00]: 0x00057400 10 10 11 10 [ 17.233029] ath10k_pci 0000:00:00.0: [01]: 0x00057800 6 6 5 6 [ 17.239570] ath10k_pci 0000:00:00.0: [02]: 0x00057c00 0 0 63 0 [ 17.246128] ath10k_pci 0000:00:00.0: [03]: 0x00058000 0 0 0 0 [ 17.252675] ath10k_pci 0000:00:00.0: [04]: 0x00058400 0 0 0 0 [ 17.259212] ath10k_pci 0000:00:00.0: [05]: 0x00058800 0 0 0 0 [ 17.265764] ath10k_pci 0000:00:00.0: [06]: 0x00058c00 0 0 0 0 [ 17.272319] ath10k_pci 0000:00:00.0: [07]: 0x00059000 1 1 1 1 [ 17.278861] ath10k_pci 0000:00:00.0: pci hif send complete check [ 17.284967] ath10k_pci 0000:00:00.0: Copy Engine register dump: [ 17.290980] ath10k_pci 0000:00:00.0: [00]: 0x00057400 10 10 11 10 [ 17.297533] ath10k_pci 0000:00:00.0: [01]: 0x00057800 6 6 5 6 [ 17.304084] ath10k_pci 0000:00:00.0: [02]: 0x00057c00 0 0 63 0 [ 17.310620] ath10k_pci 0000:00:00.0: [03]: 0x00058000 0 0 0 0 [ 17.317176] ath10k_pci 0000:00:00.0: [04]: 0x00058400 0 0 0 0 [ 17.323729] ath10k_pci 0000:00:00.0: [05]: 0x00058800 0 0 0 0 [ 17.330274] ath10k_pci 0000:00:00.0: [06]: 0x00058c00 0 0 0 0 [ 17.336824] ath10k_pci 0000:00:00.0: [07]: 0x00059000 1 1 1 1 [ 17.343380] ath10k_pci 0000:00:00.0: pci hif send complete check [ 17.349474] ath10k_pci 0000:00:00.0: Copy Engine register dump: [ 17.355501] ath10k_pci 0000:00:00.0: [00]: 0x00057400 10 10 11 10 [ 17.362044] ath10k_pci 0000:00:00.0: [01]: 0x00057800 6 6 5 6 [ 17.368594] ath10k_pci 0000:00:00.0: [02]: 0x00057c00 0 0 63 0 [ 17.375144] ath10k_pci 0000:00:00.0: [03]: 0x00058000 0 0 0 0 [ 17.381682] ath10k_pci 0000:00:00.0: [04]: 0x00058400 0 0 0 0 [ 17.388235] ath10k_pci 0000:00:00.0: [05]: 0x00058800 0 0 0 0 [ 17.394790] ath10k_pci 0000:00:00.0: [06]: 0x00058c00 0 0 0 0 [ 17.401331] ath10k_pci 0000:00:00.0: [07]: 0x00059000 1 1 1 1 [ 17.407900] ath10k_pci 0000:00:00.0: pci hif send complete check [ 17.414006] ath10k_pci 0000:00:00.0: Copy Engine register dump: [ 17.420018] ath10k_pci 0000:00:00.0: [00]: 0x00057400 10 10 11 10 [ 17.426570] ath10k_pci 0000:00:00.0: [01]: 0x00057800 6 6 5 6 [ 17.433119] ath10k_pci 0000:00:00.0: [02]: 0x00057c00 0 0 63 0 [ 17.439659] ath10k_pci 0000:00:00.0: [03]: 0x00058000 0 0 0 0 [ 17.446207] ath10k_pci 0000:00:00.0: [04]: 0x00058400 0 0 0 0 [ 17.452753] ath10k_pci 0000:00:00.0: [05]: 0x00058800 0 0 127 0 [ 17.459288] ath10k_pci 0000:00:00.0: [06]: 0x00058c00 0 0 0 0 [ 17.465844] ath10k_pci 0000:00:00.0: [07]: 0x00059000 1 1 1 1 [ 17.472393] ath10k_pci 0000:00:00.0: pci hif send complete check [ 17.478482] ath10k_pci 0000:00:00.0: Copy Engine register dump: [ 17.484509] ath10k_pci 0000:00:00.0: [00]: 0x00057400 10 10 11 10 [ 17.491052] ath10k_pci 0000:00:00.0: [01]: 0x00057800 6 6 5 6 [ 17.497600] ath10k_pci 0000:00:00.0: [02]: 0x00057c00 0 0 63 0 [ 17.504152] ath10k_pci 0000:00:00.0: [03]: 0x00058000 0 0 0 0 [ 17.510689] ath10k_pci 0000:00:00.0: [04]: 0x00058400 0 0 0 0 [ 17.517242] ath10k_pci 0000:00:00.0: [05]: 0x00058800 0 0 127 0 [ 17.523797] ath10k_pci 0000:00:00.0: [06]: 0x00058c00 0 0 0 0 [ 17.530341] ath10k_pci 0000:00:00.0: [07]: 0x00059000 1 1 1 1 [ 18.612158] ath10k_pci 0000:00:00.0: ctl_resp never came in (-145) [ 18.618427] ath10k_pci 0000:00:00.0: failed to connect to HTC: -145 [ 18.624797] ath10k_pci 0000:00:00.0: boot hif stop [ 18.630758] ath10k_pci 0000:00:00.0: could not init core (-145) [ 18.636893] ath10k_pci 0000:00:00.0: boot hif power down [ 18.642304] ath10k_pci 0000:00:00.0: could not probe fw (-145) [ 18.694782] ath: EEPROM regdomain: 0x0 [ 18.698591] ath: EEPROM indicates default country code should be used [ 18.705152] ath: doing EEPROM country->regdmn map search [ 18.710550] ath: country maps to regdmn code: 0x3a [ 18.715420] ath: Country alpha2 being used: US [ 18.719921] ath: Regpair used: 0x3a [ 18.741147] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht' [ 18.749490] ieee80211 phy1: Atheros AR9550 Rev:0 mem=0xb8100000, irq=12 [ 18.812526] kmodloader: done loading kernel modules from /etc/modules.d/* [ 47.429359] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready [ 47.436481] eth1: link up (1000Mbps/Full duplex) [ 47.441181] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready [ 47.475602] br-lan: port 1(eth1.1) entered blocking state [ 47.481087] br-lan: port 1(eth1.1) entered disabled state [ 47.486905] device eth1.1 entered promiscuous mode [ 47.491769] device eth1 entered promiscuous mode [ 47.546852] br-lan: port 1(eth1.1) entered blocking state [ 47.552373] br-lan: port 1(eth1.1) entered forwarding state [ 47.558177] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready [ 47.646842] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 47.674813] IPv6: ADDRCONF(NETDEV_UP): eth0.2: link is not ready [ 48.452468] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready [ 48.693435] eth0: link up (1000Mbps/Full duplex) [ 48.698191] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 48.722234] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.2: link becomes ready
Regards, Tom
linux-stable-mirror@lists.linaro.org
-
Christian Lamparter -
Sasha Levin -
Tom Psyborg