Commit 495184ac91bb ("mt76: mt7915: add support for applying pre-calibration data") was fundamentally broken and never worked.

The idea (before NVMEM support) was to expand the MTD function and pass an additional offset. For normal EEPROM load the offset would always be 0. For the purpose of precal loading, an offset was passed that was internally the size of EEPROM, since precal data is right after the EEPROM.

Problem is that the offset value passed is never handled and is actually overwrite by

offset = be32_to_cpup(list); ret = mtd_read(mtd, offset, len, &retlen, eep);

resulting in the passed offset value always ingnored. (and even passing garbage data as precal as the start of the EEPROM is getting read)

Fix this by adding to the current offset value, the offset from DT to correctly read the piece of data at the requested location.

Cc: stable@vger.kernel.org Fixes: 495184ac91bb ("mt76: mt7915: add support for applying pre-calibration data") Signed-off-by: Christian Marangi ansuelsmth@gmail.com --- drivers/net/wireless/mediatek/mt76/eeprom.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/wireless/mediatek/mt76/eeprom.c b/drivers/net/wireless/mediatek/mt76/eeprom.c index 36564930aef1..2558788f7ffb 100644 --- a/drivers/net/wireless/mediatek/mt76/eeprom.c +++ b/drivers/net/wireless/mediatek/mt76/eeprom.c @@ -67,7 +67,7 @@ static int mt76_get_of_epprom_from_mtd(struct mt76_dev *dev, void *eep, int offs goto out_put_node; }

- offset = be32_to_cpup(list); + offset += be32_to_cpup(list); ret = mtd_read(mtd, offset, len, &retlen, eep); put_mtd_device(mtd); if (mtd_is_bitflip(ret))