From: Christian Borntraeger borntraeger@de.ibm.com

[ Upstream commit 774911290c589e98e3638e73b24b0a4d4530e97c ]

The current number of KVM_IRQCHIP_NUM_PINS results in an order 3 allocation (32kb) for each guest start/restart. This can result in OOM killer activity even with free swap when the memory is fragmented enough:

kernel: qemu-system-s39 invoked oom-killer: gfp_mask=0x440dc0(GFP_KERNEL_ACCOUNT|__GFP_COMP|__GFP_ZERO), order=3, oom_score_adj=0 kernel: CPU: 1 PID: 357274 Comm: qemu-system-s39 Kdump: loaded Not tainted 5.4.0-29-generic #33-Ubuntu kernel: Hardware name: IBM 8562 T02 Z06 (LPAR) kernel: Call Trace: kernel: ([<00000001f848fe2a>] show_stack+0x7a/0xc0) kernel: [<00000001f8d3437a>] dump_stack+0x8a/0xc0 kernel: [<00000001f8687032>] dump_header+0x62/0x258 kernel: [<00000001f8686122>] oom_kill_process+0x172/0x180 kernel: [<00000001f8686abe>] out_of_memory+0xee/0x580 kernel: [<00000001f86e66b8>] __alloc_pages_slowpath+0xd18/0xe90 kernel: [<00000001f86e6ad4>] __alloc_pages_nodemask+0x2a4/0x320 kernel: [<00000001f86b1ab4>] kmalloc_order+0x34/0xb0 kernel: [<00000001f86b1b62>] kmalloc_order_trace+0x32/0xe0 kernel: [<00000001f84bb806>] kvm_set_irq_routing+0xa6/0x2e0 kernel: [<00000001f84c99a4>] kvm_arch_vm_ioctl+0x544/0x9e0 kernel: [<00000001f84b8936>] kvm_vm_ioctl+0x396/0x760 kernel: [<00000001f875df66>] do_vfs_ioctl+0x376/0x690 kernel: [<00000001f875e304>] ksys_ioctl+0x84/0xb0 kernel: [<00000001f875e39a>] __s390x_sys_ioctl+0x2a/0x40 kernel: [<00000001f8d55424>] system_call+0xd8/0x2c8

As far as I can tell s390x does not use the iopins as we bail our for anything other than KVM_IRQ_ROUTING_S390_ADAPTER and the chip/pin is only used for KVM_IRQ_ROUTING_IRQCHIP. So let us use a small number to reduce the memory footprint.

Signed-off-by: Christian Borntraeger borntraeger@de.ibm.com Reviewed-by: Cornelia Huck cohuck@redhat.com Reviewed-by: David Hildenbrand david@redhat.com Link: https://lore.kernel.org/r/20200617083620.5409-1-borntraeger@de.ibm.com Signed-off-by: Sasha Levin sashal@kernel.org --- arch/s390/include/asm/kvm_host.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h index 7d9c5917da2b8..737bc0a39463f 100644 --- a/arch/s390/include/asm/kvm_host.h +++ b/arch/s390/include/asm/kvm_host.h @@ -29,12 +29,12 @@ #define KVM_USER_MEM_SLOTS 32

/* - * These seem to be used for allocating ->chip in the routing table, - * which we don't use. 4096 is an out-of-thin-air value. If we need - * to look at ->chip later on, we'll need to revisit this. + * These seem to be used for allocating ->chip in the routing table, which we + * don't use. 1 is as small as we can get to reduce the needed memory. If we + * need to look at ->chip later on, we'll need to revisit this. */ #define KVM_NR_IRQCHIPS 1 -#define KVM_IRQCHIP_NUM_PINS 4096 +#define KVM_IRQCHIP_NUM_PINS 1 #define KVM_HALT_POLL_NS_DEFAULT 0

#define SIGP_CTRL_C 0x80

From: Zhenzhong Duan zhenzhong.duan@gmail.com

[ Upstream commit 06096cc6c5a84ced929634b0d79376b94c65a4bd ]

If an spi device is unbounded from the driver before the release process, there will be an NULL pointer reference when it's referenced in spi_slave_abort().

Fix it by checking it's already freed before reference.

Signed-off-by: Zhenzhong Duan zhenzhong.duan@gmail.com Link: https://lore.kernel.org/r/20200618032125.4650-2-zhenzhong.duan@gmail.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spidev.c | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c index 80beb8406f200..7969f5484aee8 100644 --- a/drivers/spi/spidev.c +++ b/drivers/spi/spidev.c @@ -635,15 +635,20 @@ err_find_dev: static int spidev_release(struct inode *inode, struct file *filp) { struct spidev_data *spidev; + int dofree;

mutex_lock(&device_list_lock); spidev = filp->private_data; filp->private_data = NULL;

+ spin_lock_irq(&spidev->spi_lock); + /* ... after we unbound from the underlying device? */ + dofree = (spidev->spi == NULL); + spin_unlock_irq(&spidev->spi_lock); + /* last close? */ spidev->users--; if (!spidev->users) { - int dofree;

kfree(spidev->tx_buffer); spidev->tx_buffer = NULL; @@ -651,19 +656,14 @@ static int spidev_release(struct inode *inode, struct file *filp) kfree(spidev->rx_buffer); spidev->rx_buffer = NULL;

- spin_lock_irq(&spidev->spi_lock); - if (spidev->spi) - spidev->speed_hz = spidev->spi->max_speed_hz; - - /* ... after we unbound from the underlying device? */ - dofree = (spidev->spi == NULL); - spin_unlock_irq(&spidev->spi_lock); - if (dofree) kfree(spidev); + else + spidev->speed_hz = spidev->spi->max_speed_hz; } #ifdef CONFIG_SPI_SLAVE - spi_slave_abort(spidev->spi); + if (!dofree) + spi_slave_abort(spidev->spi); #endif mutex_unlock(&device_list_lock);

From: Li Heng liheng40@huawei.com

[ Upstream commit 8a259e6b73ad8181b0b2ef338b35043433db1075 ]

t4_prep_fw goto bye tag with positive return value when something bad happened and which can not free resource in adap_init0. so fix it to return negative value.

Fixes: 16e47624e76b ("cxgb4: Add new scheme to update T4/T5 firmware") Reported-by: Hulk Robot hulkci@huawei.com Signed-off-by: Li Heng liheng40@huawei.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/chelsio/cxgb4/t4_hw.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c index fd6492fd3dc07..9d07fa318ac3d 100644 --- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c +++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c @@ -3093,7 +3093,7 @@ int t4_prep_fw(struct adapter *adap, struct fw_info *fw_info, drv_fw = &fw_info->fw_hdr;

/* Read the header of the firmware on the card */ - ret = -t4_read_flash(adap, FLASH_FW_START, + ret = t4_read_flash(adap, FLASH_FW_START, sizeof(*card_fw) / sizeof(uint32_t), (uint32_t *)card_fw, 1); if (ret == 0) { @@ -3122,8 +3122,8 @@ int t4_prep_fw(struct adapter *adap, struct fw_info *fw_info, should_install_fs_fw(adap, card_fw_usable, be32_to_cpu(fs_fw->fw_ver), be32_to_cpu(card_fw->fw_ver))) { - ret = -t4_fw_upgrade(adap, adap->mbox, fw_data, - fw_size, 0); + ret = t4_fw_upgrade(adap, adap->mbox, fw_data, + fw_size, 0); if (ret != 0) { dev_err(adap->pdev_dev, "failed to install firmware: %d\n", ret); @@ -3154,7 +3154,7 @@ int t4_prep_fw(struct adapter *adap, struct fw_info *fw_info, FW_HDR_FW_VER_MICRO_G(c), FW_HDR_FW_VER_BUILD_G(c), FW_HDR_FW_VER_MAJOR_G(k), FW_HDR_FW_VER_MINOR_G(k), FW_HDR_FW_VER_MICRO_G(k), FW_HDR_FW_VER_BUILD_G(k)); - ret = EINVAL; + ret = -EINVAL; goto bye; }

From: Andre Edich andre.edich@microchip.com

[ Upstream commit 3ed58f96a70b85ef646d5427258f677f1395b62f ]

In a case where the ID_REV register read is failed, the memory for a private data structure has to be freed before returning error from the function smsc95xx_bind.

Fixes: bbd9f9ee69242 ("smsc95xx: add wol support for more frame types") Signed-off-by: Andre Edich andre.edich@microchip.com Signed-off-by: Parthiban Veerasooran Parthiban.Veerasooran@microchip.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/usb/smsc95xx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c index 8037a2e51a789..e4299852974e3 100644 --- a/drivers/net/usb/smsc95xx.c +++ b/drivers/net/usb/smsc95xx.c @@ -1142,7 +1142,8 @@ static int smsc95xx_bind(struct usbnet *dev, struct usb_interface *intf) /* detect device revision as different features may be available */ ret = smsc95xx_read_reg(dev, ID_REV, &val); if (ret < 0) - return ret; + goto free_pdata; + val >>= 16;

if ((val == ID_REV_CHIP_ID_9500A_) || (val == ID_REV_CHIP_ID_9530_) ||

From: Wei Li liwei391@huawei.com

[ Upstream commit 8523c006264df65aac7d77284cc69aac46a6f842 ]

After entering kdb due to breakpoint, when we execute 'ss' or 'go' (will delay installing breakpoints, do single-step first), it won't work correctly, and it will enter kdb due to oops.

It's because the reason gotten in kdb_stub() is not as expected, and it seems that the ex_vector for single-step should be 0, like what arch powerpc/sh/parisc has implemented.

Before the patch: Entering kdb (current=0xffff8000119e2dc0, pid 0) on processor 0 due to Keyboard Entry [0]kdb> bp printk Instruction(i) BP #0 at 0xffff8000101486cc (printk) is enabled addr at ffff8000101486cc, hardtype=0 installed=0

[0]kdb> g

/ # echo h > /proc/sysrq-trigger

Entering kdb (current=0xffff0000fa878040, pid 266) on processor 3 due to Breakpoint @ 0xffff8000101486cc [3]kdb> ss

Entering kdb (current=0xffff0000fa878040, pid 266) on processor 3 Oops: (null) due to oops @ 0xffff800010082ab8 CPU: 3 PID: 266 Comm: sh Not tainted 5.7.0-rc4-13839-gf0e5ad491718 #6 Hardware name: linux,dummy-virt (DT) pstate: 00000085 (nzcv daIf -PAN -UAO) pc : el1_irq+0x78/0x180 lr : __handle_sysrq+0x80/0x190 sp : ffff800015003bf0 x29: ffff800015003d20 x28: ffff0000fa878040 x27: 0000000000000000 x26: ffff80001126b1f0 x25: ffff800011b6a0d8 x24: 0000000000000000 x23: 0000000080200005 x22: ffff8000101486cc x21: ffff800015003d30 x20: 0000ffffffffffff x19: ffff8000119f2000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 x11: 0000000000000000 x10: 0000000000000000 x9 : 0000000000000000 x8 : ffff800015003e50 x7 : 0000000000000002 x6 : 00000000380b9990 x5 : ffff8000106e99e8 x4 : ffff0000fadd83c0 x3 : 0000ffffffffffff x2 : ffff800011b6a0d8 x1 : ffff800011b6a000 x0 : ffff80001130c9d8 Call trace: el1_irq+0x78/0x180 printk+0x0/0x84 write_sysrq_trigger+0xb0/0x118 proc_reg_write+0xb4/0xe0 __vfs_write+0x18/0x40 vfs_write+0xb0/0x1b8 ksys_write+0x64/0xf0 __arm64_sys_write+0x14/0x20 el0_svc_common.constprop.2+0xb0/0x168 do_el0_svc+0x20/0x98 el0_sync_handler+0xec/0x1a8 el0_sync+0x140/0x180

[3]kdb>

After the patch: Entering kdb (current=0xffff8000119e2dc0, pid 0) on processor 0 due to Keyboard Entry [0]kdb> bp printk Instruction(i) BP #0 at 0xffff8000101486cc (printk) is enabled addr at ffff8000101486cc, hardtype=0 installed=0

[0]kdb> g

/ # echo h > /proc/sysrq-trigger

Entering kdb (current=0xffff0000fa852bc0, pid 268) on processor 0 due to Breakpoint @ 0xffff8000101486cc [0]kdb> g

Entering kdb (current=0xffff0000fa852bc0, pid 268) on processor 0 due to Breakpoint @ 0xffff8000101486cc [0]kdb> ss

Entering kdb (current=0xffff0000fa852bc0, pid 268) on processor 0 due to SS trap @ 0xffff800010082ab8 [0]kdb>

Fixes: 44679a4f142b ("arm64: KGDB: Add step debugging support") Signed-off-by: Wei Li liwei391@huawei.com Tested-by: Douglas Anderson dianders@chromium.org Reviewed-by: Douglas Anderson dianders@chromium.org Link: https://lore.kernel.org/r/20200509214159.19680-2-liwei391@huawei.com Signed-off-by: Will Deacon will@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm64/kernel/kgdb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/kernel/kgdb.c b/arch/arm64/kernel/kgdb.c index f72743dc070d9..606c21760f23e 100644 --- a/arch/arm64/kernel/kgdb.c +++ b/arch/arm64/kernel/kgdb.c @@ -238,7 +238,7 @@ static int kgdb_step_brk_fn(struct pt_regs *regs, unsigned int esr) if (user_mode(regs)) return DBG_HOOK_ERROR;

- kgdb_handle_exception(1, SIGTRAP, 0, regs); + kgdb_handle_exception(0, SIGTRAP, 0, regs); return DBG_HOOK_HANDLED; }

From: Hui Wang hui.wang@canonical.com

commit 6a6ca7881b1ab1c13fe0d70bae29211a65dd90de upstream.

We have a Dell AIO, there is neither internal speaker nor internal mic, only a multi-function audio jack on it.

Users reported that after freshly installing the OS and plug a headset to the audio jack, the headset can't output sound. I reproduced this bug, at that moment, the Input Source is as below: Simple mixer control 'Input Source',0 Capabilities: cenum Items: 'Headphone Mic' 'Headset Mic' Item0: 'Headphone Mic'

That is because the patch_realtek will set this audio jack as mic_in mode if Input Source's value is hp_mic.

If it is not fresh installing, this issue will not happen since the systemd will run alsactl restore -f /var/lib/alsa/asound.state, this will set the 'Input Source' according to history value.

If there is internal speaker or internal mic, this issue will not happen since there is valid sink/source in the pulseaudio, the PA will set the 'Input Source' according to active_port.

To fix this issue, change the parser function to let the hs_mic be stored ahead of hp_mic.

Cc: stable@vger.kernel.org Signed-off-by: Hui Wang hui.wang@canonical.com Link: https://lore.kernel.org/r/20200625083833.11264-1-hui.wang@canonical.com Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- sound/pci/hda/hda_auto_parser.c | 6 ++++++ 1 file changed, 6 insertions(+)

--- a/sound/pci/hda/hda_auto_parser.c +++ b/sound/pci/hda/hda_auto_parser.c @@ -76,6 +76,12 @@ static int compare_input_type(const void if (a->type != b->type) return (int)(a->type - b->type);

+ /* If has both hs_mic and hp_mic, pick the hs_mic ahead of hp_mic. */ + if (a->is_headset_mic && b->is_headphone_mic) + return -1; /* don't swap */ + else if (a->is_headphone_mic && b->is_headset_mic) + return 1; /* swap */ + /* In case one has boost and the other one has not, pick the one with boost first. */ return (int)(b->has_boost_on_pin - a->has_boost_on_pin);

From: Paolo Bonzini pbonzini@redhat.com

commit 5ecad245de2ae23dc4e2dbece92f8ccfbaed2fa7 upstream.

Bit 8 would be the "global" bit, which does not quite make sense for non-leaf page table entries. Intel ignores it; AMD ignores it in PDEs and PDPEs, but reserves it in PML4Es.

Probably, earlier versions of the AMD manual documented it as reserved in PDPEs as well, and that behavior made it into KVM as well as kvm-unit-tests; fix it.

Cc: stable@vger.kernel.org Reported-by: Nadav Amit namit@vmware.com Fixes: a0c0feb57992 ("KVM: x86: reserve bit 8 of non-leaf PDPEs and PML4Es in 64-bit mode on AMD", 2014-09-03) Signed-off-by: Paolo Bonzini pbonzini@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/x86/kvm/mmu.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -3679,7 +3679,7 @@ __reset_rsvds_bits_mask(struct kvm_vcpu nonleaf_bit8_rsvd | rsvd_bits(7, 7) | rsvd_bits(maxphyaddr, 51); rsvd_check->rsvd_bits_mask[0][2] = exb_bit_rsvd | - nonleaf_bit8_rsvd | gbpages_bit_rsvd | + gbpages_bit_rsvd | rsvd_bits(maxphyaddr, 51); rsvd_check->rsvd_bits_mask[0][1] = exb_bit_rsvd | rsvd_bits(maxphyaddr, 51);

From: Boris Burkov boris@bur.io

commit 6bf9cd2eed9aee6d742bb9296c994a91f5316949 upstream.

Under somewhat convoluted conditions, it is possible to attempt to release an extent_buffer that is under io, which triggers a BUG_ON in btrfs_release_extent_buffer_pages.

This relies on a few different factors. First, extent_buffer reads done as readahead for searching use WAIT_NONE, so they free the local extent buffer reference while the io is outstanding. However, they should still be protected by TREE_REF. However, if the system is doing signficant reclaim, and simultaneously heavily accessing the extent_buffers, it is possible for releasepage to race with two concurrent readahead attempts in a way that leaves TREE_REF unset when the readahead extent buffer is released.

Essentially, if two tasks race to allocate a new extent_buffer, but the winner who attempts the first io is rebuffed by a page being locked (likely by the reclaim itself) then the loser will still go ahead with issuing the readahead. The loser's call to find_extent_buffer must also race with the reclaim task reading the extent_buffer's refcount as 1 in a way that allows the reclaim to re-clear the TREE_REF checked by find_extent_buffer.

The following represents an example execution demonstrating the race:

CPU0 CPU1 CPU2 reada_for_search reada_for_search readahead_tree_block readahead_tree_block find_create_tree_block find_create_tree_block alloc_extent_buffer alloc_extent_buffer find_extent_buffer // not found allocates eb lock pages associate pages to eb insert eb into radix tree set TREE_REF, refs == 2 unlock pages read_extent_buffer_pages // WAIT_NONE not uptodate (brand new eb) lock_page if !trylock_page goto unlock_exit // not an error free_extent_buffer release_extent_buffer atomic_dec_and_test refs to 1 find_extent_buffer // found try_release_extent_buffer take refs_lock reads refs == 1; no io atomic_inc_not_zero refs to 2 mark_buffer_accessed check_buffer_tree_ref // not STALE, won't take refs_lock refs == 2; TREE_REF set // no action read_extent_buffer_pages // WAIT_NONE clear TREE_REF release_extent_buffer atomic_dec_and_test refs to 1 unlock_page still not uptodate (CPU1 read failed on trylock_page) locks pages set io_pages > 0 submit io return free_extent_buffer release_extent_buffer dec refs to 0 delete from radix tree btrfs_release_extent_buffer_pages BUG_ON(io_pages > 0)!!!

We observe this at a very low rate in production and were also able to reproduce it in a test environment by introducing some spurious delays and by introducing probabilistic trylock_page failures.

To fix it, we apply check_tree_ref at a point where it could not possibly be unset by a competing task: after io_pages has been incremented. All the codepaths that clear TREE_REF check for io, so they would not be able to clear it after this point until the io is done.

Stack trace, for reference: [1417839.424739] ------------[ cut here ]------------ [1417839.435328] kernel BUG at fs/btrfs/extent_io.c:4841! [1417839.447024] invalid opcode: 0000 [#1] SMP [1417839.502972] RIP: 0010:btrfs_release_extent_buffer_pages+0x20/0x1f0 [1417839.517008] Code: ed e9 ... [1417839.558895] RSP: 0018:ffffc90020bcf798 EFLAGS: 00010202 [1417839.570816] RAX: 0000000000000002 RBX: ffff888102d6def0 RCX: 0000000000000028 [1417839.586962] RDX: 0000000000000002 RSI: ffff8887f0296482 RDI: ffff888102d6def0 [1417839.603108] RBP: ffff88885664a000 R08: 0000000000000046 R09: 0000000000000238 [1417839.619255] R10: 0000000000000028 R11: ffff88885664af68 R12: 0000000000000000 [1417839.635402] R13: 0000000000000000 R14: ffff88875f573ad0 R15: ffff888797aafd90 [1417839.651549] FS: 00007f5a844fa700(0000) GS:ffff88885f680000(0000) knlGS:0000000000000000 [1417839.669810] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [1417839.682887] CR2: 00007f7884541fe0 CR3: 000000049f609002 CR4: 00000000003606e0 [1417839.699037] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [1417839.715187] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [1417839.731320] Call Trace: [1417839.737103] release_extent_buffer+0x39/0x90 [1417839.746913] read_block_for_search.isra.38+0x2a3/0x370 [1417839.758645] btrfs_search_slot+0x260/0x9b0 [1417839.768054] btrfs_lookup_file_extent+0x4a/0x70 [1417839.778427] btrfs_get_extent+0x15f/0x830 [1417839.787665] ? submit_extent_page+0xc4/0x1c0 [1417839.797474] ? __do_readpage+0x299/0x7a0 [1417839.806515] __do_readpage+0x33b/0x7a0 [1417839.815171] ? btrfs_releasepage+0x70/0x70 [1417839.824597] extent_readpages+0x28f/0x400 [1417839.833836] read_pages+0x6a/0x1c0 [1417839.841729] ? startup_64+0x2/0x30 [1417839.849624] __do_page_cache_readahead+0x13c/0x1a0 [1417839.860590] filemap_fault+0x6c7/0x990 [1417839.869252] ? xas_load+0x8/0x80 [1417839.876756] ? xas_find+0x150/0x190 [1417839.884839] ? filemap_map_pages+0x295/0x3b0 [1417839.894652] __do_fault+0x32/0x110 [1417839.902540] __handle_mm_fault+0xacd/0x1000 [1417839.912156] handle_mm_fault+0xaa/0x1c0 [1417839.921004] __do_page_fault+0x242/0x4b0 [1417839.930044] ? page_fault+0x8/0x30 [1417839.937933] page_fault+0x1e/0x30 [1417839.945631] RIP: 0033:0x33c4bae [1417839.952927] Code: Bad RIP value. [1417839.960411] RSP: 002b:00007f5a844f7350 EFLAGS: 00010206 [1417839.972331] RAX: 000000000000006e RBX: 1614b3ff6a50398a RCX: 0000000000000000 [1417839.988477] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000002 [1417840.004626] RBP: 00007f5a844f7420 R08: 000000000000006e R09: 00007f5a94aeccb8 [1417840.020784] R10: 00007f5a844f7350 R11: 0000000000000000 R12: 00007f5a94aecc79 [1417840.036932] R13: 00007f5a94aecc78 R14: 00007f5a94aecc90 R15: 00007f5a94aecc40

CC: stable@vger.kernel.org # 4.4+ Reviewed-by: Filipe Manana fdmanana@suse.com Signed-off-by: Boris Burkov boris@bur.io Signed-off-by: David Sterba dsterba@suse.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- fs/btrfs/extent_io.c | 40 ++++++++++++++++++++++++---------------- 1 file changed, 24 insertions(+), 16 deletions(-)

--- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -4861,25 +4861,28 @@ err: static void check_buffer_tree_ref(struct extent_buffer *eb) { int refs; - /* the ref bit is tricky. We have to make sure it is set - * if we have the buffer dirty. Otherwise the - * code to free a buffer can end up dropping a dirty - * page + /* + * The TREE_REF bit is first set when the extent_buffer is added + * to the radix tree. It is also reset, if unset, when a new reference + * is created by find_extent_buffer. * - * Once the ref bit is set, it won't go away while the - * buffer is dirty or in writeback, and it also won't - * go away while we have the reference count on the - * eb bumped. + * It is only cleared in two cases: freeing the last non-tree + * reference to the extent_buffer when its STALE bit is set or + * calling releasepage when the tree reference is the only reference. * - * We can't just set the ref bit without bumping the - * ref on the eb because free_extent_buffer might - * see the ref bit and try to clear it. If this happens - * free_extent_buffer might end up dropping our original - * ref by mistake and freeing the page before we are able - * to add one more ref. + * In both cases, care is taken to ensure that the extent_buffer's + * pages are not under io. However, releasepage can be concurrently + * called with creating new references, which is prone to race + * conditions between the calls to check_buffer_tree_ref in those + * codepaths and clearing TREE_REF in try_release_extent_buffer. * - * So bump the ref count first, then set the bit. If someone - * beat us to it, drop the ref we added. + * The actual lifetime of the extent_buffer in the radix tree is + * adequately protected by the refcount, but the TREE_REF bit and + * its corresponding reference are not. To protect against this + * class of races, we call check_buffer_tree_ref from the codepaths + * which trigger io after they set eb->io_pages. Note that once io is + * initiated, TREE_REF can no longer be cleared, so that is the + * moment at which any such race is best fixed. */ refs = atomic_read(&eb->refs); if (refs >= 2 && test_bit(EXTENT_BUFFER_TREE_REF, &eb->bflags)) @@ -5346,6 +5349,11 @@ int read_extent_buffer_pages(struct exte clear_bit(EXTENT_BUFFER_READ_ERR, &eb->bflags); eb->read_mirror = 0; atomic_set(&eb->io_pages, num_reads); + /* + * It is possible for releasepage to clear the TREE_REF bit before we + * set io_pages. See check_buffer_tree_ref for a more detailed comment. + */ + check_buffer_tree_ref(eb); for (i = start_i; i < num_pages; i++) { page = eb->pages[i]; if (!PageUptodate(page)) {

From: Vineet Gupta vgupta@synopsys.com

commit 00fdec98d9881bf5173af09aebd353ab3b9ac729 upstream.

Trap handler for syscall tracing reads EFA (Exception Fault Address), in case strace wants PC of trap instruction (EFA is not part of pt_regs as of current code).

However this EFA read is racy as it happens after dropping to pure kernel mode (re-enabling interrupts). A taken interrupt could context-switch, trigger a different task's trap, clobbering EFA for this execution context.

Fix this by reading EFA early, before re-enabling interrupts. A slight side benefit is de-duplication of FAKE_RET_FROM_EXCPN in trap handler. The trap handler is common to both ARCompact and ARCv2 builds too.

This just came out of code rework/review and no real problem was reported but is clearly a potential problem specially for strace.

Cc: stable@vger.kernel.org Signed-off-by: Vineet Gupta vgupta@synopsys.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- arch/arc/kernel/entry.S | 16 +++++----------- 1 file changed, 5 insertions(+), 11 deletions(-)

--- a/arch/arc/kernel/entry.S +++ b/arch/arc/kernel/entry.S @@ -168,7 +168,6 @@ END(EV_Extension) tracesys: ; save EFA in case tracer wants the PC of traced task ; using ERET won't work since next-PC has already committed - lr r12, [efa] GET_CURR_TASK_FIELD_PTR TASK_THREAD, r11 st r12, [r11, THREAD_FAULT_ADDR] ; thread.fault_address

@@ -211,15 +210,9 @@ tracesys_exit: ; Breakpoint TRAP ; --------------------------------------------- trap_with_param: - - ; stop_pc info by gdb needs this info - lr r0, [efa] + mov r0, r12 ; EFA in case ptracer/gdb wants stop_pc mov r1, sp

- ; Now that we have read EFA, it is safe to do "fake" rtie - ; and get out of CPU exception mode - FAKE_RET_FROM_EXCPN - ; Save callee regs in case gdb wants to have a look ; SP will grow up by size of CALLEE Reg-File ; NOTE: clobbers r12 @@ -246,6 +239,10 @@ ENTRY(EV_Trap)

EXCEPTION_PROLOGUE

+ lr r12, [efa] + + FAKE_RET_FROM_EXCPN + ;============ TRAP 1 :breakpoints ; Check ECR for trap with arg (PROLOGUE ensures r9 has ECR) bmsk.f 0, r9, 7 @@ -253,9 +250,6 @@ ENTRY(EV_Trap)

;============ TRAP (no param): syscall top level

- ; First return from Exception to pure K mode (Exception/IRQs renabled) - FAKE_RET_FROM_EXCPN - ; If syscall tracing ongoing, invoke pre-post-hooks GET_CURR_THR_INFO_FLAGS r10 btst r10, TIF_SYSCALL_TRACE

From: Davide Caratti dcaratti@redhat.com

commit c8b1d7436045d3599bae56aef1682813ecccaad7 upstream.

we need to set 'active_vfs' back to 0, if something goes wrong during the allocation of SR-IOV resources: otherwise, further VF configurations will wrongly assume that bp->pf.vf[x] are valid memory locations, and commands like the ones in the following sequence:

# echo 2 >/sys/bus/pci/devices/${ADDR}/sriov_numvfs # ip link set dev ens1f0np0 up # ip link set dev ens1f0np0 vf 0 trust on

will cause a kernel crash similar to this:

bnxt_en 0000:3b:00.0: not enough MMIO resources for SR-IOV BUG: kernel NULL pointer dereference, address: 0000000000000014 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 43 PID: 2059 Comm: ip Tainted: G I 5.8.0-rc2.upstream+ #871 Hardware name: Dell Inc. PowerEdge R740/08D89F, BIOS 2.2.11 06/13/2019 RIP: 0010:bnxt_set_vf_trust+0x5b/0x110 [bnxt_en] Code: 44 24 58 31 c0 e8 f5 fb ff ff 85 c0 0f 85 b6 00 00 00 48 8d 1c 5b 41 89 c6 b9 0b 00 00 00 48 c1 e3 04 49 03 9c 24 f0 0e 00 00 <8b> 43 14 89 c2 83 c8 10 83 e2 ef 45 84 ed 49 89 e5 0f 44 c2 4c 89 RSP: 0018:ffffac6246a1f570 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000000000000b RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff98b28f538900 RBP: ffff98b28f538900 R08: 0000000000000000 R09: 0000000000000008 R10: ffffffffb9515be0 R11: ffffac6246a1f678 R12: ffff98b28f538000 R13: 0000000000000001 R14: 0000000000000000 R15: ffffffffc05451e0 FS: 00007fde0f688800(0000) GS:ffff98baffd40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000014 CR3: 000000104bb0a003 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: do_setlink+0x994/0xfe0 __rtnl_newlink+0x544/0x8d0 rtnl_newlink+0x47/0x70 rtnetlink_rcv_msg+0x29f/0x350 netlink_rcv_skb+0x4a/0x110 netlink_unicast+0x21d/0x300 netlink_sendmsg+0x329/0x450 sock_sendmsg+0x5b/0x60 ____sys_sendmsg+0x204/0x280 ___sys_sendmsg+0x88/0xd0 __sys_sendmsg+0x5e/0xa0 do_syscall_64+0x47/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: c0c050c58d840 ("bnxt_en: New Broadcom ethernet driver.") Reported-by: Fei Liu feliu@redhat.com CC: Jonathan Toppins jtoppins@redhat.com CC: Michael Chan michael.chan@broadcom.com Signed-off-by: Davide Caratti dcaratti@redhat.com Reviewed-by: Michael Chan michael.chan@broadcom.com Acked-by: Jonathan Toppins jtoppins@redhat.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c +++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c @@ -295,6 +295,7 @@ static void bnxt_free_vf_resources(struc } }

+ bp->pf.active_vfs = 0; kfree(bp->pf.vf); bp->pf.vf = NULL; } @@ -535,7 +536,6 @@ void bnxt_sriov_disable(struct bnxt *bp)

bnxt_free_vf_resources(bp);

- bp->pf.active_vfs = 0; bp->pf.max_pf_rx_rings = bp->pf.max_rx_rings; bp->pf.max_pf_tx_rings = bp->pf.max_tx_rings; }

From: Xin Long lucien.xin@gmail.com

[ Upstream commit 27d53323664c549b5bb2dfaaf6f7ad6e0376a64e ]

In the tx path of l2tp, l2tp_xmit_skb() calls skb_dst_set() to set skb's dst. However, it will eventually call inet6_csk_xmit() or ip_queue_xmit() where skb's dst will be overwritten by:

skb_dst_set_noref(skb, dst);

without releasing the old dst in skb. Then it causes dst/dev refcnt leak:

unregister_netdevice: waiting for eth0 to become free. Usage count = 1

This can be reproduced by simply running:

# modprobe l2tp_eth && modprobe l2tp_ip # sh ./tools/testing/selftests/net/l2tp.sh

So before going to inet6_csk_xmit() or ip_queue_xmit(), skb's dst should be dropped. This patch is to fix it by removing skb_dst_set() from l2tp_xmit_skb() and moving skb_dst_drop() into l2tp_xmit_core().

Fixes: 3557baabf280 ("[L2TP]: PPP over L2TP driver core") Reported-by: Hangbin Liu liuhangbin@gmail.com Signed-off-by: Xin Long lucien.xin@gmail.com Acked-by: James Chapman jchapman@katalix.com Tested-by: James Chapman jchapman@katalix.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/l2tp/l2tp_core.c | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-)

--- a/net/l2tp/l2tp_core.c +++ b/net/l2tp/l2tp_core.c @@ -1139,6 +1139,7 @@ static int l2tp_xmit_core(struct l2tp_se

/* Queue the packet to IP for output */ skb->ignore_df = 1; + skb_dst_drop(skb); #if IS_ENABLED(CONFIG_IPV6) if (tunnel->sock->sk_family == PF_INET6 && !tunnel->v4mapped) error = inet6_csk_xmit(tunnel->sock, skb, NULL); @@ -1203,10 +1204,6 @@ int l2tp_xmit_skb(struct l2tp_session *s goto out_unlock; }

- /* Get routing info from the tunnel socket */ - skb_dst_drop(skb); - skb_dst_set(skb, sk_dst_check(sk, 0)); - inet = inet_sk(sk); fl = &inet->cork.fl; switch (tunnel->encap) {

From: Martin Varghese martin.varghese@nokia.com

[ Upstream commit 394de110a73395de2ca4516b0de435e91b11b604 ]

The packets from tunnel devices (eg bareudp) may have only metadata in the dst pointer of skb. Hence a pointer check of neigh_lookup is needed in dst_neigh_lookup_skb

Kernel crashes when packets from bareudp device is processed in the kernel neighbour subsytem.

[ 133.384484] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 133.385240] #PF: supervisor instruction fetch in kernel mode [ 133.385828] #PF: error_code(0x0010) - not-present page [ 133.386603] PGD 0 P4D 0 [ 133.386875] Oops: 0010 [#1] SMP PTI [ 133.387275] CPU: 0 PID: 5045 Comm: ping Tainted: G W 5.8.0-rc2+ #15 [ 133.388052] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011 [ 133.391076] RIP: 0010:0x0 [ 133.392401] Code: Bad RIP value. [ 133.394029] RSP: 0018:ffffb79980003d50 EFLAGS: 00010246 [ 133.396656] RAX: 0000000080000102 RBX: ffff9de2fe0d6600 RCX: ffff9de2fe5e9d00 [ 133.399018] RDX: 0000000000000000 RSI: ffff9de2fe5e9d00 RDI: ffff9de2fc21b400 [ 133.399685] RBP: ffff9de2fe5e9d00 R08: 0000000000000000 R09: 0000000000000000 [ 133.400350] R10: ffff9de2fbc6be22 R11: ffff9de2fe0d6600 R12: ffff9de2fc21b400 [ 133.401010] R13: ffff9de2fe0d6628 R14: 0000000000000001 R15: 0000000000000003 [ 133.401667] FS: 00007fe014918740(0000) GS:ffff9de2fec00000(0000) knlGS:0000000000000000 [ 133.402412] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 133.402948] CR2: ffffffffffffffd6 CR3: 000000003bb72000 CR4: 00000000000006f0 [ 133.403611] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 133.404270] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 133.404933] Call Trace: [ 133.405169] <IRQ> [ 133.405367] __neigh_update+0x5a4/0x8f0 [ 133.405734] arp_process+0x294/0x820 [ 133.406076] ? __netif_receive_skb_core+0x866/0xe70 [ 133.406557] arp_rcv+0x129/0x1c0 [ 133.406882] __netif_receive_skb_one_core+0x95/0xb0 [ 133.407340] process_backlog+0xa7/0x150 [ 133.407705] net_rx_action+0x2af/0x420 [ 133.408457] __do_softirq+0xda/0x2a8 [ 133.408813] asm_call_on_stack+0x12/0x20 [ 133.409290] </IRQ> [ 133.409519] do_softirq_own_stack+0x39/0x50 [ 133.410036] do_softirq+0x50/0x60 [ 133.410401] __local_bh_enable_ip+0x50/0x60 [ 133.410871] ip_finish_output2+0x195/0x530 [ 133.411288] ip_output+0x72/0xf0 [ 133.411673] ? __ip_finish_output+0x1f0/0x1f0 [ 133.412122] ip_send_skb+0x15/0x40 [ 133.412471] raw_sendmsg+0x853/0xab0 [ 133.412855] ? insert_pfn+0xfe/0x270 [ 133.413827] ? vvar_fault+0xec/0x190 [ 133.414772] sock_sendmsg+0x57/0x80 [ 133.415685] __sys_sendto+0xdc/0x160 [ 133.416605] ? syscall_trace_enter+0x1d4/0x2b0 [ 133.417679] ? __audit_syscall_exit+0x1d9/0x280 [ 133.418753] ? __prepare_exit_to_usermode+0x5d/0x1a0 [ 133.419819] __x64_sys_sendto+0x24/0x30 [ 133.420848] do_syscall_64+0x4d/0x90 [ 133.421768] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 133.422833] RIP: 0033:0x7fe013689c03 [ 133.423749] Code: Bad RIP value. [ 133.424624] RSP: 002b:00007ffc7288f418 EFLAGS: 00000246 ORIG_RAX: 000000000000002c [ 133.425940] RAX: ffffffffffffffda RBX: 000056151fc63720 RCX: 00007fe013689c03 [ 133.427225] RDX: 0000000000000040 RSI: 000056151fc63720 RDI: 0000000000000003 [ 133.428481] RBP: 00007ffc72890b30 R08: 000056151fc60500 R09: 0000000000000010 [ 133.429757] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040 [ 133.431041] R13: 000056151fc636e0 R14: 000056151fc616bc R15: 0000000000000080 [ 133.432481] Modules linked in: mpls_iptunnel act_mirred act_tunnel_key cls_flower sch_ingress veth mpls_router ip_tunnel bareudp ip6_udp_tunnel udp_tunnel macsec udp_diag inet_diag unix_diag af_packet_diag netlink_diag binfmt_misc xt_MASQUERADE iptable_nat xt_addrtype xt_conntrack nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter bridge stp llc ebtable_filter ebtables overlay ip6table_filter ip6_tables iptable_filter sunrpc ext4 mbcache jbd2 pcspkr i2c_piix4 virtio_balloon joydev ip_tables xfs libcrc32c ata_generic qxl pata_acpi drm_ttm_helper ttm drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm ata_piix libata virtio_net net_failover virtio_console failover virtio_blk i2c_core virtio_pci virtio_ring serio_raw floppy virtio dm_mirror dm_region_hash dm_log dm_mod [ 133.444045] CR2: 0000000000000000 [ 133.445082] ---[ end trace f4aeee1958fd1638 ]--- [ 133.446236] RIP: 0010:0x0 [ 133.447180] Code: Bad RIP value. [ 133.448152] RSP: 0018:ffffb79980003d50 EFLAGS: 00010246 [ 133.449363] RAX: 0000000080000102 RBX: ffff9de2fe0d6600 RCX: ffff9de2fe5e9d00 [ 133.450835] RDX: 0000000000000000 RSI: ffff9de2fe5e9d00 RDI: ffff9de2fc21b400 [ 133.452237] RBP: ffff9de2fe5e9d00 R08: 0000000000000000 R09: 0000000000000000 [ 133.453722] R10: ffff9de2fbc6be22 R11: ffff9de2fe0d6600 R12: ffff9de2fc21b400 [ 133.455149] R13: ffff9de2fe0d6628 R14: 0000000000000001 R15: 0000000000000003 [ 133.456520] FS: 00007fe014918740(0000) GS:ffff9de2fec00000(0000) knlGS:0000000000000000 [ 133.458046] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 133.459342] CR2: ffffffffffffffd6 CR3: 000000003bb72000 CR4: 00000000000006f0 [ 133.460782] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 133.462240] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 133.463697] Kernel panic - not syncing: Fatal exception in interrupt [ 133.465226] Kernel Offset: 0xfa00000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff) [ 133.467025] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---

Fixes: aaa0c23cb901 ("Fix dst_neigh_lookup/dst_neigh_lookup_skb return value handling bug") Signed-off-by: Martin Varghese martin.varghese@nokia.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- include/net/dst.h | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)

--- a/include/net/dst.h +++ b/include/net/dst.h @@ -470,7 +470,15 @@ static inline struct neighbour *dst_neig static inline struct neighbour *dst_neigh_lookup_skb(const struct dst_entry *dst, struct sk_buff *skb) { - struct neighbour *n = dst->ops->neigh_lookup(dst, skb, NULL); + struct neighbour *n = NULL; + + /* The packets from tunnel devices (eg bareudp) may have only + * metadata in the dst pointer of skb. Hence a pointer check of + * neigh_lookup is needed. + */ + if (dst->ops->neigh_lookup) + n = dst->ops->neigh_lookup(dst, skb, NULL); + return IS_ERR(n) ? NULL : n; }

From: Christoph Paasch cpaasch@apple.com

[ Upstream commit ce69e563b325f620863830c246a8698ccea52048 ]

syzkaller found its way into setsockopt with TCP_CONGESTION "cdg". tcp_cdg_init() does a kcalloc to store the gradients. As sk_clone_lock just copies all the memory, the allocated pointer will be copied as well, if the app called setsockopt(..., TCP_CONGESTION) on the listener. If now the socket will be destroyed before the congestion-control has properly been initialized (through a call to tcp_init_transfer), we will end up freeing memory that does not belong to that particular socket, opening the door to a double-free:

[ 11.413102] ================================================================== [ 11.414181] BUG: KASAN: double-free or invalid-free in tcp_cleanup_congestion_control+0x58/0xd0 [ 11.415329] [ 11.415560] CPU: 3 PID: 4884 Comm: syz-executor.5 Not tainted 5.8.0-rc2 #80 [ 11.416544] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 [ 11.418148] Call Trace: [ 11.418534] <IRQ> [ 11.418834] dump_stack+0x7d/0xb0 [ 11.419297] print_address_description.constprop.0+0x1a/0x210 [ 11.422079] kasan_report_invalid_free+0x51/0x80 [ 11.423433] __kasan_slab_free+0x15e/0x170 [ 11.424761] kfree+0x8c/0x230 [ 11.425157] tcp_cleanup_congestion_control+0x58/0xd0 [ 11.425872] tcp_v4_destroy_sock+0x57/0x5a0 [ 11.426493] inet_csk_destroy_sock+0x153/0x2c0 [ 11.427093] tcp_v4_syn_recv_sock+0xb29/0x1100 [ 11.427731] tcp_get_cookie_sock+0xc3/0x4a0 [ 11.429457] cookie_v4_check+0x13d0/0x2500 [ 11.433189] tcp_v4_do_rcv+0x60e/0x780 [ 11.433727] tcp_v4_rcv+0x2869/0x2e10 [ 11.437143] ip_protocol_deliver_rcu+0x23/0x190 [ 11.437810] ip_local_deliver+0x294/0x350 [ 11.439566] __netif_receive_skb_one_core+0x15d/0x1a0 [ 11.441995] process_backlog+0x1b1/0x6b0 [ 11.443148] net_rx_action+0x37e/0xc40 [ 11.445361] __do_softirq+0x18c/0x61a [ 11.445881] asm_call_on_stack+0x12/0x20 [ 11.446409] </IRQ> [ 11.446716] do_softirq_own_stack+0x34/0x40 [ 11.447259] do_softirq.part.0+0x26/0x30 [ 11.447827] __local_bh_enable_ip+0x46/0x50 [ 11.448406] ip_finish_output2+0x60f/0x1bc0 [ 11.450109] __ip_queue_xmit+0x71c/0x1b60 [ 11.451861] __tcp_transmit_skb+0x1727/0x3bb0 [ 11.453789] tcp_rcv_state_process+0x3070/0x4d3a [ 11.456810] tcp_v4_do_rcv+0x2ad/0x780 [ 11.457995] __release_sock+0x14b/0x2c0 [ 11.458529] release_sock+0x4a/0x170 [ 11.459005] __inet_stream_connect+0x467/0xc80 [ 11.461435] inet_stream_connect+0x4e/0xa0 [ 11.462043] __sys_connect+0x204/0x270 [ 11.465515] __x64_sys_connect+0x6a/0xb0 [ 11.466088] do_syscall_64+0x3e/0x70 [ 11.466617] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 11.467341] RIP: 0033:0x7f56046dc469 [ 11.467844] Code: Bad RIP value. [ 11.468282] RSP: 002b:00007f5604dccdd8 EFLAGS: 00000246 ORIG_RAX: 000000000000002a [ 11.469326] RAX: ffffffffffffffda RBX: 000000000068bf00 RCX: 00007f56046dc469 [ 11.470379] RDX: 0000000000000010 RSI: 0000000020000000 RDI: 0000000000000004 [ 11.471311] RBP: 00000000ffffffff R08: 0000000000000000 R09: 0000000000000000 [ 11.472286] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [ 11.473341] R13: 000000000041427c R14: 00007f5604dcd5c0 R15: 0000000000000003 [ 11.474321] [ 11.474527] Allocated by task 4884: [ 11.475031] save_stack+0x1b/0x40 [ 11.475548] __kasan_kmalloc.constprop.0+0xc2/0xd0 [ 11.476182] tcp_cdg_init+0xf0/0x150 [ 11.476744] tcp_init_congestion_control+0x9b/0x3a0 [ 11.477435] tcp_set_congestion_control+0x270/0x32f [ 11.478088] do_tcp_setsockopt.isra.0+0x521/0x1a00 [ 11.478744] __sys_setsockopt+0xff/0x1e0 [ 11.479259] __x64_sys_setsockopt+0xb5/0x150 [ 11.479895] do_syscall_64+0x3e/0x70 [ 11.480395] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 11.481097] [ 11.481321] Freed by task 4872: [ 11.481783] save_stack+0x1b/0x40 [ 11.482230] __kasan_slab_free+0x12c/0x170 [ 11.482839] kfree+0x8c/0x230 [ 11.483240] tcp_cleanup_congestion_control+0x58/0xd0 [ 11.483948] tcp_v4_destroy_sock+0x57/0x5a0 [ 11.484502] inet_csk_destroy_sock+0x153/0x2c0 [ 11.485144] tcp_close+0x932/0xfe0 [ 11.485642] inet_release+0xc1/0x1c0 [ 11.486131] __sock_release+0xc0/0x270 [ 11.486697] sock_close+0xc/0x10 [ 11.487145] __fput+0x277/0x780 [ 11.487632] task_work_run+0xeb/0x180 [ 11.488118] __prepare_exit_to_usermode+0x15a/0x160 [ 11.488834] do_syscall_64+0x4a/0x70 [ 11.489326] entry_SYSCALL_64_after_hwframe+0x44/0xa9

Wei Wang fixed a part of these CDG-malloc issues with commit c12014440750 ("tcp: memset ca_priv data to 0 properly").

This patch here fixes the listener-scenario: We make sure that listeners setting the congestion-control through setsockopt won't initialize it (thus CDG never allocates on listeners). For those who use AF_UNSPEC to reuse a socket, tcp_disconnect() is changed to cleanup afterwards.

(The issue can be reproduced at least down to v4.4.x.)

Cc: Wei Wang weiwan@google.com Cc: Eric Dumazet edumazet@google.com Fixes: 2b0a8c9eee81 ("tcp: add CDG congestion control") Signed-off-by: Christoph Paasch cpaasch@apple.com Signed-off-by: Eric Dumazet edumazet@google.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/ipv4/tcp.c | 3 +++ net/ipv4/tcp_cong.c | 2 +- 2 files changed, 4 insertions(+), 1 deletion(-)

--- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -2259,6 +2259,9 @@ int tcp_disconnect(struct sock *sk, int tp->snd_ssthresh = TCP_INFINITE_SSTHRESH; tp->snd_cwnd_cnt = 0; tp->window_clamp = 0; + if (icsk->icsk_ca_ops->release) + icsk->icsk_ca_ops->release(sk); + memset(icsk->icsk_ca_priv, 0, sizeof(icsk->icsk_ca_priv)); tcp_set_ca_state(sk, TCP_CA_Open); tcp_clear_retrans(tp); tp->total_retrans = 0; --- a/net/ipv4/tcp_cong.c +++ b/net/ipv4/tcp_cong.c @@ -201,7 +201,7 @@ static void tcp_reinit_congestion_contro icsk->icsk_ca_ops = ca; icsk->icsk_ca_setsockopt = 1;

- if (sk->sk_state != TCP_CLOSE) + if (!((1 << sk->sk_state) & (TCPF_CLOSE | TCPF_LISTEN))) tcp_init_congestion_control(sk); }

From: Eric Dumazet edumazet@google.com

[ Upstream commit e6ced831ef11a2a06e8d00aad9d4fc05b610bf38 ]

My prior fix went a bit too far, according to Herbert and Mathieu.

Since we accept that concurrent TCP MD5 lookups might see inconsistent keys, we can use READ_ONCE()/WRITE_ONCE() instead of smp_rmb()/smp_wmb()

Clearing all key->key[] is needed to avoid possible KMSAN reports, if key->keylen is increased. Since tcp_md5_do_add() is not fast path, using __GFP_ZERO to clear all struct tcp_md5sig_key is simpler.

data_race() was added in linux-5.8 and will prevent KCSAN reports, this can safely be removed in stable backports, if data_race() is not yet backported.

v2: use data_race() both in tcp_md5_hash_key() and tcp_md5_do_add()

Fixes: 6a2febec338d ("tcp: md5: add missing memory barriers in tcp_md5_do_add()/tcp_md5_hash_key()") Signed-off-by: Eric Dumazet edumazet@google.com Cc: Mathieu Desnoyers mathieu.desnoyers@efficios.com Cc: Herbert Xu herbert@gondor.apana.org.au Cc: Marco Elver elver@google.com Reviewed-by: Mathieu Desnoyers mathieu.desnoyers@efficios.com Acked-by: Herbert Xu herbert@gondor.apana.org.au Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/ipv4/tcp.c | 6 +++--- net/ipv4/tcp_ipv4.c | 14 ++++++++++---- 2 files changed, 13 insertions(+), 7 deletions(-)

--- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -3088,12 +3088,12 @@ EXPORT_SYMBOL(tcp_md5_hash_skb_data);

int tcp_md5_hash_key(struct tcp_md5sig_pool *hp, const struct tcp_md5sig_key *key) { - u8 keylen = key->keylen; + u8 keylen = READ_ONCE(key->keylen); /* paired with WRITE_ONCE() in tcp_md5_do_add */ struct scatterlist sg;

- smp_rmb(); /* paired with smp_wmb() in tcp_md5_do_add() */ - sg_init_one(&sg, key->key, keylen); + + /* tcp_md5_do_add() might change key->key under us */ return crypto_hash_update(&hp->md5_desc, &sg, key->keylen); } EXPORT_SYMBOL(tcp_md5_hash_key); --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -931,12 +931,18 @@ int tcp_md5_do_add(struct sock *sk, cons

key = tcp_md5_do_lookup(sk, addr, family); if (key) { - /* Pre-existing entry - just update that one. */ + /* Pre-existing entry - just update that one. + * Note that the key might be used concurrently. + */ memcpy(key->key, newkey, newkeylen);

- smp_wmb(); /* pairs with smp_rmb() in tcp_md5_hash_key() */ + /* Pairs with READ_ONCE() in tcp_md5_hash_key(). + * Also note that a reader could catch new key->keylen value + * but old key->key[], this is the reason we use __GFP_ZERO + * at sock_kmalloc() time below these lines. + */ + WRITE_ONCE(key->keylen, newkeylen);

- key->keylen = newkeylen; return 0; }

@@ -953,7 +959,7 @@ int tcp_md5_do_add(struct sock *sk, cons rcu_assign_pointer(tp->md5sig_info, md5sig); }

- key = sock_kmalloc(sk, sizeof(*key), gfp); + key = sock_kmalloc(sk, sizeof(*key), gfp | __GFP_ZERO); if (!key) return -ENOMEM; if (!tcp_alloc_md5sig_pool()) {

From: Andy Shevchenko andriy.shevchenko@linux.intel.com

[ Upstream commit 5f90786b31fb7d1e199a8999d46c4e3aea672e11 ]

The driver can't be loaded automatically because it misses module alias to be provided. Add corresponding MODULE_DEVICE_TABLE() call to the driver.

Signed-off-by: Andy Shevchenko andriy.shevchenko@linux.intel.com Signed-off-by: Wolfram Sang wsa@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/i2c/busses/i2c-eg20t.c | 1 + 1 file changed, 1 insertion(+)

diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2c-eg20t.c index eef3aa6007f10..ffd8f9772096c 100644 --- a/drivers/i2c/busses/i2c-eg20t.c +++ b/drivers/i2c/busses/i2c-eg20t.c @@ -189,6 +189,7 @@ static const struct pci_device_id pch_pcidev_id[] = { { PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ML7831_I2C), 1, }, {0,} }; +MODULE_DEVICE_TABLE(pci, pch_pcidev_id);

static irqreturn_t pch_i2c_handler(int irq, void *pData);

This reverts commit 737c975db35b0117fc5c702072ca2df6f2f7eb63.

Eugeniu Rosca writes:

On Thu, Jul 09, 2020 at 09:00:23AM +0200, Eugeniu Rosca wrote:

After integrating v4.14.186 commit 5410d158ca2a50 ("usb/ehci-platform: Set PM runtime as active on resume") into downstream v4.14.x, we started to consistently experience below panic [1] on every second s2ram of R-Car H3 Salvator-X Renesas reference board.

After some investigations, we concluded the following:

• the issue does not exist in vanilla v5.8-rc4+
• [bisecting shows that] the panic on v4.14.186 is caused by the lack of v5.6-rc1 commit 987351e1ea7772 ("phy: core: Add consumer device link support"). Getting evidence for that is easy. Reverting 987351e1ea7772 in vanilla leads to a similar backtrace [2].

Questions:

• Backporting 987351e1ea7772 ("phy: core: Add consumer device link support") to v4.14.187 looks challenging enough, so probably not worth it. Anybody to contradict this?
• Assuming no plans to backport the missing mainline commit to v4.14.x, should the following three v4.14.186 commits be reverted on v4.14.x?
  • baef809ea497a4 ("usb/ohci-platform: Fix a warning when hibernating")
  • 9f33eff4958885 ("usb/xhci-plat: Set PM runtime as active on resume")
  • 5410d158ca2a50 ("usb/ehci-platform: Set PM runtime as active on resume")

Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/host/xhci-plat.c | 11 +---------- 1 file changed, 1 insertion(+), 10 deletions(-)

diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index 510fb7853f92a..c4c40e9d42471 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -249,17 +249,8 @@ static int xhci_plat_resume(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); struct xhci_hcd *xhci = hcd_to_xhci(hcd); - int ret; - - ret = xhci_resume(xhci, 0); - if (ret) - return ret;

- pm_runtime_disable(dev); - pm_runtime_set_active(dev); - pm_runtime_enable(dev); - - return 0; + return xhci_resume(xhci, 0); }

static const struct dev_pm_ops xhci_plat_pm_ops = {

From: Michał Mirosław mirq-linux@rere.qmqm.pl

[ Upstream commit 30517ffeb3bff842e1355cbc32f1959d9dbb5414 ]

Fixed commit moved the assignment of 'req', but did not update a reference in the DBG() call. Use the argument as it was renamed.

Fixes: 5fb694f96e7c ("usb: gadget: udc: atmel: fix possible oops when unloading module") Signed-off-by: Michał Mirosław mirq-linux@rere.qmqm.pl Signed-off-by: Felipe Balbi balbi@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/usb/gadget/udc/atmel_usba_udc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/usb/gadget/udc/atmel_usba_udc.c b/drivers/usb/gadget/udc/atmel_usba_udc.c index 668ac5e8681b5..e6902257d7de7 100644 --- a/drivers/usb/gadget/udc/atmel_usba_udc.c +++ b/drivers/usb/gadget/udc/atmel_usba_udc.c @@ -843,7 +843,7 @@ static int usba_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) u32 status;

DBG(DBG_GADGET | DBG_QUEUE, "ep_dequeue: %s, req %p\n", - ep->ep.name, req); + ep->ep.name, _req);

spin_lock_irqsave(&udc->lock, flags);

From: Jin Yao yao.jin@linux.intel.com

commit 0e0bf1ea1147fcf74eab19c2d3c853cc3740a72f upstream.

As the code comments in perf_stat_process_counter() say, we calculate counter's data every interval, and the display code shows ps->res_stats avg value. We need to zero the stats for interval mode.

But the current code only zeros the res_stats[0], it doesn't zero the res_stats[1] and res_stats[2], which are for ena and run of counter.

This patch zeros the whole res_stats[] for interval mode.

Fixes: 51fd2df1e882 ("perf stat: Fix interval output values") Signed-off-by: Jin Yao yao.jin@linux.intel.com Cc: Alexander Shishkin alexander.shishkin@linux.intel.com Cc: Andi Kleen ak@linux.intel.com Cc: Jin Yao yao.jin@intel.com Cc: Jiri Olsa jolsa@kernel.org Cc: Kan Liang kan.liang@linux.intel.com Cc: Peter Zijlstra peterz@infradead.org Link: http://lore.kernel.org/lkml/20200409070755.17261-1-yao.jin@linux.intel.com Signed-off-by: Arnaldo Carvalho de Melo acme@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- tools/perf/util/stat.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)

--- a/tools/perf/util/stat.c +++ b/tools/perf/util/stat.c @@ -318,8 +318,10 @@ int perf_stat_process_counter(struct per * interval mode, otherwise overall avg running * averages will be shown for each interval. */ - if (config->interval) - init_stats(ps->res_stats); + if (config->interval) { + for (i = 0; i < 3; i++) + init_stats(&ps->res_stats[i]); + }

if (counter->per_pkg) zero_per_pkg(counter);

From: Dmitry Torokhov dmitry.torokhov@gmail.com

commit 6363d2065cd399cf9d6dc9d08c437f8658831100 upstream.

Neither the trackpad, nor the mouse want input core to generate autorepeat events for their buttons, so let's reset the bit (as hid-input sets it for these devices based on the usage vendor code).

Cc: stable@vger.kernel.org Reported-by: Yariv oigevald+kernel@gmail.com Tested-by: Yariv oigevald+kernel@gmail.com Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Jiri Kosina jkosina@suse.cz Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/hid/hid-magicmouse.c | 6 ++++++ 1 file changed, 6 insertions(+)

--- a/drivers/hid/hid-magicmouse.c +++ b/drivers/hid/hid-magicmouse.c @@ -451,6 +451,12 @@ static int magicmouse_setup_input(struct __set_bit(MSC_RAW, input->mscbit); }

+ /* + * hid-input may mark device as using autorepeat, but neither + * the trackpad, nor the mouse actually want it. + */ + __clear_bit(EV_REP, input->evbit); + return 0; }

From: Takashi Iwai tiwai@suse.de

commit 6e8a914ad619042c5f25a4feb663357c4170fd8d upstream.

LINE6 drivers create stream URBs with a fixed pipe without checking its validity, and this may lead to a kernel WARNING at the submission when a malformed USB descriptor is passed.

For avoiding the kernel warning, perform the similar sanity checks for each pipe type at creating a URB.

Reported-by: syzbot+c190f6858a04ea7fbc52@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/s5hv9iv4hq8.wl-tiwai@suse.de Signed-off-by: Takashi Iwai tiwai@suse.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- sound/usb/line6/capture.c | 2 ++ sound/usb/line6/playback.c | 2 ++ 2 files changed, 4 insertions(+)

--- a/sound/usb/line6/capture.c +++ b/sound/usb/line6/capture.c @@ -269,6 +269,8 @@ int line6_create_audio_in_urbs(struct sn urb->interval = LINE6_ISO_INTERVAL; urb->error_count = 0; urb->complete = audio_in_callback; + if (usb_urb_ep_type_check(urb)) + return -EINVAL; }

return 0; --- a/sound/usb/line6/playback.c +++ b/sound/usb/line6/playback.c @@ -423,6 +423,8 @@ int line6_create_audio_out_urbs(struct s urb->interval = LINE6_ISO_INTERVAL; urb->error_count = 0; urb->complete = audio_out_callback; + if (usb_urb_ep_type_check(urb)) + return -EINVAL; }

return 0;

From: Tom Rix trix@redhat.com

commit 211f08347355cba1f769bbf3355816a12b3ddd55 upstream.

clang static analysis flags this error

c67x00-sched.c:489:55: warning: Use of memory after it is freed [unix.Malloc] usb_hcd_giveback_urb(c67x00_hcd_to_hcd(c67x00), urb, urbp->status); ^~~~~~~~~~~~ Problem happens in this block of code

c67x00_release_urb(c67x00, urb); usb_hcd_unlink_urb_from_ep(c67x00_hcd_to_hcd(c67x00), urb); spin_unlock(&c67x00->lock); usb_hcd_giveback_urb(c67x00_hcd_to_hcd(c67x00), urb, urbp->status);

In the call to c67x00_release_urb has this freeing of urbp

urbp = urb->hcpriv; urb->hcpriv = NULL; list_del(&urbp->hep_node); kfree(urbp);

And so urbp is freed before usb_hcd_giveback_urb uses it as its 3rd parameter.

Since all is required is the status, pass the status directly as is done in c64x00_urb_dequeue

Fixes: e9b29ffc519b ("USB: add Cypress c67x00 OTG controller HCD driver") Signed-off-by: Tom Rix trix@redhat.com Cc: stable stable@vger.kernel.org Link: https://lore.kernel.org/r/20200708131243.24336-1-trix@redhat.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/usb/c67x00/c67x00-sched.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/usb/c67x00/c67x00-sched.c +++ b/drivers/usb/c67x00/c67x00-sched.c @@ -500,7 +500,7 @@ c67x00_giveback_urb(struct c67x00_hcd *c c67x00_release_urb(c67x00, urb); usb_hcd_unlink_urb_from_ep(c67x00_hcd_to_hcd(c67x00), urb); spin_unlock(&c67x00->lock); - usb_hcd_giveback_urb(c67x00_hcd_to_hcd(c67x00), urb, urbp->status); + usb_hcd_giveback_urb(c67x00_hcd_to_hcd(c67x00), urb, status); spin_lock(&c67x00->lock); }

From: Zhang Qiang qiang.zhang@windriver.com

commit 8778eb0927ddcd3f431805c37b78fa56481aeed9 upstream.

Add a missing spinlock protection for play_queue, because the play_queue may be destroyed when the "playback_work" work func and "f_audio_out_ep_complete" callback func operate this paly_queue at the same time.

Fixes: c6994e6f067cf ("USB: gadget: add USB Audio Gadget driver") Cc: stable stable@vger.kernel.org Signed-off-by: Zhang Qiang qiang.zhang@windriver.com Signed-off-by: Felipe Balbi balbi@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/usb/gadget/function/f_uac1.c | 2 ++ 1 file changed, 2 insertions(+)

--- a/drivers/usb/gadget/function/f_uac1.c +++ b/drivers/usb/gadget/function/f_uac1.c @@ -336,7 +336,9 @@ static int f_audio_out_ep_complete(struc

/* Copy buffer is full, add it to the play_queue */ if (audio_buf_size - copy_buf->actual < req->actual) { + spin_lock_irq(&audio->lock); list_add_tail(&copy_buf->list, &audio->play_queue); + spin_unlock_irq(&audio->lock); schedule_work(&audio->playback_work); copy_buf = f_audio_buffer_alloc(audio_buf_size); if (IS_ERR(copy_buf))

From: James Hilliard james.hilliard1@gmail.com

commit 5c45d04c5081c1830d674f4d22d4400ea2083afe upstream.

This is a UPB (Universal Powerline Bus) PIM (Powerline Interface Module) which allows for controlling multiple UPB compatible devices from Linux using the standard serial interface.

Based on vendor application source code there are two different models of USB based PIM devices in addition to a number of RS232 based PIM's.

The vendor UPB application source contains the following USB ID's:

#define USB_PCS_VENDOR_ID 0x04b4 #define USB_PCS_PIM_PRODUCT_ID 0x5500

#define USB_SAI_VENDOR_ID 0x17dd #define USB_SAI_PIM_PRODUCT_ID 0x5500

The first set of ID's correspond to the PIM variant sold by Powerline Control Systems while the second corresponds to the Simply Automated Incorporated PIM. As the product ID for both of these match the default cypress HID->COM RS232 product ID it assumed that they both use an internal variant of this HID->COM RS232 converter hardware. However as the vendor ID for the Simply Automated variant is different we need to also add it to the cypress_M8 driver so that it is properly detected.

Signed-off-by: James Hilliard james.hilliard1@gmail.com Link: https://lore.kernel.org/r/20200616220403.1807003-1-james.hilliard1@gmail.com Cc: stable@vger.kernel.org [ johan: amend VID define entry ] Signed-off-by: Johan Hovold johan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/usb/serial/cypress_m8.c | 2 ++ drivers/usb/serial/cypress_m8.h | 3 +++ 2 files changed, 5 insertions(+)

--- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -63,6 +63,7 @@ static const struct usb_device_id id_tab

static const struct usb_device_id id_table_cyphidcomrs232[] = { { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) }, + { USB_DEVICE(VENDOR_ID_SAI, PRODUCT_ID_CYPHIDCOM) }, { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) }, { USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) }, { } /* Terminating entry */ @@ -77,6 +78,7 @@ static const struct usb_device_id id_tab { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB) }, { USB_DEVICE(VENDOR_ID_DELORME, PRODUCT_ID_EARTHMATEUSB_LT20) }, { USB_DEVICE(VENDOR_ID_CYPRESS, PRODUCT_ID_CYPHIDCOM) }, + { USB_DEVICE(VENDOR_ID_SAI, PRODUCT_ID_CYPHIDCOM) }, { USB_DEVICE(VENDOR_ID_POWERCOM, PRODUCT_ID_UPS) }, { USB_DEVICE(VENDOR_ID_FRWD, PRODUCT_ID_CYPHIDCOM_FRWD) }, { USB_DEVICE(VENDOR_ID_DAZZLE, PRODUCT_ID_CA42) }, --- a/drivers/usb/serial/cypress_m8.h +++ b/drivers/usb/serial/cypress_m8.h @@ -24,6 +24,9 @@ #define VENDOR_ID_CYPRESS 0x04b4 #define PRODUCT_ID_CYPHIDCOM 0x5500

+/* Simply Automated HID->COM UPB PIM (using Cypress PID 0x5500) */ +#define VENDOR_ID_SAI 0x17dd + /* FRWD Dongle - a GPS sports watch */ #define VENDOR_ID_FRWD 0x6737 #define PRODUCT_ID_CYPHIDCOM_FRWD 0x0001

From: Jörgen Storvist jorgen.storvist@gmail.com

commit 08d4ef5cc9203a113702f24725f6cf4db476c958 upstream.

Add USB IDs for GosunCn GM500 series cellular modules.

RNDIS config: usb-devices T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 12 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=305a ProdID=1404 Rev=03.18 S: Manufacturer=Android S: Product=Android S: SerialNumber= C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host I: If#=0x1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host I: If#=0x2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option

MBIM config: usb-devices T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 11 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=305a ProdID=1405 Rev=03.18 S: Manufacturer=Android S: Product=Android S: SerialNumber= C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim I: If#=0x4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim

ECM config: usb-devices T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 13 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=305a ProdID=1406 Rev=03.18 S: Manufacturer=Android S: Product=Android S: SerialNumber= C: #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#=0x3 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether I: If#=0x4 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether

Signed-off-by: Jörgen Storvist jorgen.storvist@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold johan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/usb/serial/option.c | 3 +++ 1 file changed, 3 insertions(+)

--- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -2019,6 +2019,9 @@ static const struct usb_device_id option .driver_info = RSVD(4) | RSVD(5) }, { USB_DEVICE_INTERFACE_CLASS(0x2cb7, 0x0105, 0xff), /* Fibocom NL678 series */ .driver_info = RSVD(6) }, + { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1404, 0xff) }, /* GosunCn GM500 RNDIS */ + { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1405, 0xff) }, /* GosunCn GM500 MBIM */ + { USB_DEVICE_INTERFACE_CLASS(0x305a, 0x1406, 0xff) }, /* GosunCn GM500 ECM/NCM */ { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids);

From: Alexander Lobakin alobakin@pm.me

commit 897c44f0bae574c5fb318c759b060bebf9dd6013 upstream.

rproc_serial_id_table lacks an exposure to module devicetable, so when remoteproc firmware requests VIRTIO_ID_RPROC_SERIAL, no uevent is generated and no module autoloading occurs. Add missing MODULE_DEVICE_TABLE() annotation and move the existing one for VIRTIO_ID_CONSOLE right to the table itself.

Fixes: 1b6370463e88 ("virtio_console: Add support for remoteproc serial") Cc: stable@vger.kernel.org # v3.8+ Signed-off-by: Alexander Lobakin alobakin@pm.me Reviewed-by: Amit Shah amit@kernel.org Link: https://lore.kernel.org/r/x7C_CbeJtoGMy258nwAXASYz3xgFMFpyzmUvOyZzRnQrgWCREB... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/char/virtio_console.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/char/virtio_console.c +++ b/drivers/char/virtio_console.c @@ -2155,6 +2155,7 @@ static struct virtio_device_id id_table[ { VIRTIO_ID_CONSOLE, VIRTIO_DEV_ANY_ID }, { 0 }, }; +MODULE_DEVICE_TABLE(virtio, id_table);

static unsigned int features[] = { VIRTIO_CONSOLE_F_SIZE, @@ -2167,6 +2168,7 @@ static struct virtio_device_id rproc_ser #endif { 0 }, }; +MODULE_DEVICE_TABLE(virtio, rproc_serial_id_table);

static unsigned int rproc_serial_features[] = { }; @@ -2319,6 +2321,5 @@ static void __exit fini(void) module_init(init); module_exit(fini);

-MODULE_DEVICE_TABLE(virtio, id_table); MODULE_DESCRIPTION("Virtio console driver"); MODULE_LICENSE("GPL");

From: Alexander Usyskin alexander.usyskin@intel.com

commit e852c2c251ed9c23ae6e3efebc5ec49adb504207 upstream.

It's not needed to set driver to NULL in mei_cl_device_remove() which is bus_type remove() handler as this is done anyway in __device_release_driver().

Actually this is causing an endless loop in driver_detach() on ubuntu patched kernel, while removing (rmmod) the mei_hdcp module. The reason list_empty(&drv->p->klist_devices.k_list) is always not-empty. as the check is always true in __device_release_driver() if (dev->driver != drv) return;

The non upstream patch is causing this behavior, titled: 'vfio -- release device lock before userspace requests'

Nevertheless the fix is correct also for the upstream.

Link: https://patchwork.ozlabs.org/project/ubuntu-kernel/patch/20180912085046.3401... Cc: stable@vger.kernel.org Cc: Andy Whitcroft apw@canonical.com Signed-off-by: Alexander Usyskin alexander.usyskin@intel.com Signed-off-by: Tomas Winkler tomas.winkler@intel.com Link: https://lore.kernel.org/r/20200628225359.2185929-1-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/misc/mei/bus.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)

--- a/drivers/misc/mei/bus.c +++ b/drivers/misc/mei/bus.c @@ -626,9 +626,8 @@ static int mei_cl_device_remove(struct d ret = cldrv->remove(cldev);

module_put(THIS_MODULE); - dev->driver = NULL; - return ret;

+ return ret; }

static ssize_t name_show(struct device *dev, struct device_attribute *a,

From: Esben Haabendal esben@geanix.com

commit bf12fdf0ab728ca8e5933aac46dd972c0dd0421e upstream.

While e3a3c3a20555 ("UIO: fix uio_pdrv_genirq with device tree but no interrupt") added support for using uio_pdrv_genirq for devices without interrupt for device tree platforms, the removal of uio_pdrv in 26dac3c49d56 ("uio: Remove uio_pdrv and use uio_pdrv_genirq instead") broke the support for non device tree platforms.

This change fixes this, so that uio_pdrv_genirq can be used without interrupt on all platforms.

This still leaves the support that uio_pdrv had for custom interrupt handler lacking, as uio_pdrv_genirq does not handle it (yet).

Fixes: 26dac3c49d56 ("uio: Remove uio_pdrv and use uio_pdrv_genirq instead") Signed-off-by: Esben Haabendal esben@geanix.com Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200701145659.3978-3-esben@geanix.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/uio/uio_pdrv_genirq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/uio/uio_pdrv_genirq.c +++ b/drivers/uio/uio_pdrv_genirq.c @@ -148,7 +148,7 @@ static int uio_pdrv_genirq_probe(struct if (!uioinfo->irq) { ret = platform_get_irq(pdev, 0); uioinfo->irq = ret; - if (ret == -ENXIO && pdev->dev.of_node) + if (ret == -ENXIO) uioinfo->irq = UIO_IRQ_NONE; else if (ret < 0) { dev_err(&pdev->dev, "failed to get IRQ\n");

From: Vishwas M vishwas.reddy.vr@gmail.com

commit 14b0e83dc4f1e52b94acaeb85a18fd7fdd46d2dc upstream.

This patch fixes a bug which does not let FAN mode to be changed from sysfs(pwm1_enable). i.e pwm1_enable can not be set to 3, it will always remain at 0.

This is caused because the device driver handles the result of "read_u8_from_i2c(client, REG_FAN_CONF1, &conf_reg)" incorrectly. The driver thinks an error has occurred if the (result != 0). This has been fixed by changing the condition to (result < 0).

Signed-off-by: Vishwas M vishwas.reddy.vr@gmail.com Link: https://lore.kernel.org/r/20200707142747.118414-1-vishwas.reddy.vr@gmail.com Fixes: 9df7305b5a86 ("hwmon: Add driver for SMSC EMC2103 temperature monitor and fan controller") Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck linux@roeck-us.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/hwmon/emc2103.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/hwmon/emc2103.c +++ b/drivers/hwmon/emc2103.c @@ -452,7 +452,7 @@ static ssize_t set_pwm_enable(struct dev }

result = read_u8_from_i2c(client, REG_FAN_CONF1, &conf_reg); - if (result) { + if (result < 0) { count = result; goto err; }

From: Michał Mirosław mirq-linux@rere.qmqm.pl

commit b037d60a3b1d1227609fd858fa34321f41829911 upstream.

Uninterruptible context is not needed in the driver and causes lockdep warning because of mutex taken in of_alias_get_id(). Convert the lock to mutex to avoid the issue.

Cc: stable@vger.kernel.org Fixes: 099343c64e16 ("ARM: at91: atmel-ssc: add device tree support") Signed-off-by: Michał Mirosław mirq-linux@rere.qmqm.pl Link: https://lore.kernel.org/r/50f0d7fa107f318296afb49477c3571e4d6978c5.159299840... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

--- drivers/misc/atmel-ssc.c | 24 ++++++++++++------------ 1 file changed, 12 insertions(+), 12 deletions(-)

--- a/drivers/misc/atmel-ssc.c +++ b/drivers/misc/atmel-ssc.c @@ -13,7 +13,7 @@ #include <linux/clk.h> #include <linux/err.h> #include <linux/io.h> -#include <linux/spinlock.h> +#include <linux/mutex.h> #include <linux/atmel-ssc.h> #include <linux/slab.h> #include <linux/module.h> @@ -21,7 +21,7 @@ #include <linux/of.h>

/* Serialize access to ssc_list and user count */ -static DEFINE_SPINLOCK(user_lock); +static DEFINE_MUTEX(user_lock); static LIST_HEAD(ssc_list);

struct ssc_device *ssc_request(unsigned int ssc_num) @@ -29,7 +29,7 @@ struct ssc_device *ssc_request(unsigned int ssc_valid = 0; struct ssc_device *ssc;

- spin_lock(&user_lock); + mutex_lock(&user_lock); list_for_each_entry(ssc, &ssc_list, list) { if (ssc->pdev->dev.of_node) { if (of_alias_get_id(ssc->pdev->dev.of_node, "ssc") @@ -44,18 +44,18 @@ struct ssc_device *ssc_request(unsigned }

if (!ssc_valid) { - spin_unlock(&user_lock); + mutex_unlock(&user_lock); pr_err("ssc: ssc%d platform device is missing\n", ssc_num); return ERR_PTR(-ENODEV); }

if (ssc->user) { - spin_unlock(&user_lock); + mutex_unlock(&user_lock); dev_dbg(&ssc->pdev->dev, "module busy\n"); return ERR_PTR(-EBUSY); } ssc->user++; - spin_unlock(&user_lock); + mutex_unlock(&user_lock);

clk_prepare(ssc->clk);

@@ -67,14 +67,14 @@ void ssc_free(struct ssc_device *ssc) { bool disable_clk = true;

- spin_lock(&user_lock); + mutex_lock(&user_lock); if (ssc->user) ssc->user--; else { disable_clk = false; dev_dbg(&ssc->pdev->dev, "device already free\n"); } - spin_unlock(&user_lock); + mutex_unlock(&user_lock);

if (disable_clk) clk_unprepare(ssc->clk); @@ -194,9 +194,9 @@ static int ssc_probe(struct platform_dev return -ENXIO; }

- spin_lock(&user_lock); + mutex_lock(&user_lock); list_add_tail(&ssc->list, &ssc_list); - spin_unlock(&user_lock); + mutex_unlock(&user_lock);

platform_set_drvdata(pdev, ssc);

@@ -210,9 +210,9 @@ static int ssc_remove(struct platform_de { struct ssc_device *ssc = platform_get_drvdata(pdev);

- spin_lock(&user_lock); + mutex_lock(&user_lock); list_del(&ssc->list); - spin_unlock(&user_lock); + mutex_unlock(&user_lock);

return 0; }